net: convert print_mac to %pM
This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.
I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index aa4a524..6459155 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -745,10 +745,8 @@
ret = register_netdev(dev);
if (ret == 0) {
- DECLARE_MAC_BUF(mac);
-
- printk(KERN_INFO "%s: ether address %s\n",
- dev->name, print_mac(mac, dev->dev_addr));
+ printk(KERN_INFO "%s: ether address %pM\n",
+ dev->name, dev->dev_addr);
return 0;
}
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 0fa5346..65ce451 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -485,7 +485,6 @@
static int set_mac_address(struct net_device *dev, void* addr)
{
struct sockaddr *address = addr;
- DECLARE_MAC_BUF(mac);
if (!is_valid_ether_addr(address->sa_data))
return -EADDRNOTAVAIL;
@@ -493,8 +492,8 @@
memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
update_mac_address(dev);
- printk("%s: Setting MAC address to %s\n", dev->name,
- print_mac(mac, dev->dev_addr));
+ printk("%s: Setting MAC address to %pM\n", dev->name,
+ dev->dev_addr);
return 0;
}
@@ -978,7 +977,6 @@
struct at91_private *lp;
unsigned int val;
int res;
- DECLARE_MAC_BUF(mac);
dev = alloc_etherdev(sizeof(struct at91_private));
if (!dev)
@@ -1083,11 +1081,11 @@
}
/* Display ethernet banner */
- printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n",
+ printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
dev->name, (uint) dev->base_addr, dev->irq,
at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
- print_mac(mac, dev->dev_addr));
+ dev->dev_addr);
if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
else if (phy_type == MII_LXT971A_ID)
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
index 3bb9e29..e380de4 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/arm/ether1.c
@@ -996,7 +996,6 @@
{
struct net_device *dev;
int i, ret = 0;
- DECLARE_MAC_BUF(mac);
ether1_banner();
@@ -1044,8 +1043,8 @@
if (ret)
goto free;
- printk(KERN_INFO "%s: ether1 in slot %d, %s\n",
- dev->name, ec->slot_no, print_mac(mac, dev->dev_addr));
+ printk(KERN_INFO "%s: ether1 in slot %d, %pM\n",
+ dev->name, ec->slot_no, dev->dev_addr);
ecard_set_drvdata(ec, dev);
return 0;
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 67e96ae..21a7bef 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -776,7 +776,6 @@
const struct ether3_data *data = id->data;
struct net_device *dev;
int bus_type, ret;
- DECLARE_MAC_BUF(mac);
ether3_banner();
@@ -859,8 +858,8 @@
if (ret)
goto free;
- printk("%s: %s in slot %d, %s\n",
- dev->name, data->name, ec->slot_no, print_mac(mac, dev->dev_addr));
+ printk("%s: %s in slot %d, %pM\n",
+ dev->name, data->name, ec->slot_no, dev->dev_addr);
ecard_set_drvdata(ec, dev);
return 0;
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 5c5f1e4..9eb9d1b 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -648,7 +648,6 @@
struct net_device *dev;
struct etherh_priv *eh;
int ret;
- DECLARE_MAC_BUF(mac);
etherh_banner();
@@ -746,8 +745,8 @@
if (ret)
goto free;
- printk(KERN_INFO "%s: %s in slot %d, %s\n",
- dev->name, data->name, ec->slot_no, print_mac(mac, dev->dev_addr));
+ printk(KERN_INFO "%s: %s in slot %d, %pM\n",
+ dev->name, data->name, ec->slot_no, dev->dev_addr);
ecard_set_drvdata(ec, dev);
