Merge branch 'yem/kconfig-for-next' of git://gitorious.org/linux-kconfig/linux-kconfig into kbuild/kconfig
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 8ef6dbb..bbc99c0 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -20,16 +20,9 @@
To see a list of new config symbols when using "make oldconfig", use
cp user/some/old.config .config
- yes "" | make oldconfig >conf.new
+ make listnewconfig
-and the config program will list as (NEW) any new symbols that have
-unknown values. Of course, the .config file is also updated with
-new (default) values, so you can use:
-
- grep "(NEW)" conf.new
-
-to see the new config symbols or you can use diffconfig to see the
-differences between the previous and new .config files:
+and the config program will list any new symbols, one per line.
scripts/diffconfig .config.old .config | less
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index df198a5..ba663e1 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -93,7 +93,7 @@
#define SYMBOL_CHOICEVAL 0x0020 /* used as a value in a choice block */
#define SYMBOL_VALID 0x0080 /* set when symbol.curr is calculated */
#define SYMBOL_OPTIONAL 0x0100 /* choice is optional - values can be 'n' */
-#define SYMBOL_WRITE 0x0200 /* ? */
+#define SYMBOL_WRITE 0x0200 /* write symbol to file (KCONFIG_CONFIG) */
#define SYMBOL_CHANGED 0x0400 /* ? */
#define SYMBOL_AUTO 0x1000 /* value from environment variable */
#define SYMBOL_CHECKED 0x2000 /* used during dependency checking */
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 2c39631..59184bb 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -25,7 +25,7 @@
static const char mconf_readme[] = N_(
"Overview\n"
"--------\n"
-"This interface let you select features and parameters for the build.\n"
+"This interface lets you select features and parameters for the build.\n"
"Features can either be built-in, modularized, or ignored. Parameters\n"
"must be entered in as decimal or hexadecimal numbers or text.\n"
"\n"
@@ -39,15 +39,15 @@
"\n"
"To change any of these features, highlight it with the cursor\n"
"keys and press <Y> to build it in, <M> to make it a module or\n"
-"<N> to removed it. You may also press the <Space Bar> to cycle\n"
-"through the available options (ie. Y->N->M->Y).\n"
+"<N> to remove it. You may also press the <Space Bar> to cycle\n"
+"through the available options (i.e. Y->N->M->Y).\n"
"\n"
"Some additional keyboard hints:\n"
"\n"
"Menus\n"
"----------\n"
-"o Use the Up/Down arrow keys (cursor keys) to highlight the item\n"
-" you wish to change or submenu wish to select and press <Enter>.\n"
+"o Use the Up/Down arrow keys (cursor keys) to highlight the item you\n"
+" wish to change or the submenu you wish to select and press <Enter>.\n"
" Submenus are designated by \"--->\", empty ones by \"----\".\n"
"\n"
" Shortcut: Press the option's highlighted letter (hotkey).\n"
@@ -65,7 +65,7 @@
" there is a delayed response which you may find annoying.\n"
"\n"
" Also, the <TAB> and cursor keys will cycle between <Select>,\n"
-" <Exit> and <Help>.\n"
+" <Exit>, <Help>, <Save>, and <Load>.\n"
"\n"
"o To get help with an item, use the cursor keys to highlight <Help>\n"
" and press <ENTER>.\n"
@@ -105,7 +105,7 @@
"Text Box (Help Window)\n"
"--------\n"
"o Use the cursor keys to scroll up/down/left/right. The VI editor\n"
-" keys h,j,k,l function here as do <u>, <d>, <SPACE BAR> and <B> for \n"
+" keys h,j,k,l function here as do <u>, <d>, <SPACE BAR> and <B> for\n"
" those who are familiar with less and lynx.\n"
"\n"
"o Press <E>, <X>, <q>, <Enter> or <Esc><Esc> to exit.\n"
@@ -117,23 +117,21 @@
"those who, for various reasons, find it necessary to switch\n"
"between different configurations.\n"
"\n"
-"At the end of the main menu you will find two options. One is\n"
-"for saving the current configuration to a file of your choosing.\n"
-"The other option is for loading a previously saved alternate\n"
-"configuration.\n"
+"The <Save> button will let you save the current configuration to\n"
+"a file of your choosing. Use the <Load> button to load a previously\n"
+"saved alternate configuration.\n"
"\n"
-"Even if you don't use alternate configuration files, but you\n"
-"find during a Menuconfig session that you have completely messed\n"
-"up your settings, you may use the \"Load Alternate...\" option to\n"
-"restore your previously saved settings from \".config\" without\n"
-"restarting Menuconfig.\n"
+"Even if you don't use alternate configuration files, but you find\n"
+"during a Menuconfig session that you have completely messed up your\n"
+"settings, you may use the <Load> button to restore your previously\n"
+"saved settings from \".config\" without restarting Menuconfig.\n"
"\n"
"Other information\n"
"-----------------\n"
-"If you use Menuconfig in an XTERM window make sure you have your\n"
-"$TERM variable set to point to a xterm definition which supports color.\n"
-"Otherwise, Menuconfig will look rather bad. Menuconfig will not\n"
-"display correctly in a RXVT window because rxvt displays only one\n"
+"If you use Menuconfig in an XTERM window, make sure you have your\n"
+"$TERM variable set to point to an xterm definition which supports\n"
+"color. Otherwise, Menuconfig will look rather bad. Menuconfig will\n"
+"not display correctly in an RXVT window because rxvt displays only one\n"
"intensity of color, bright.\n"
"\n"
"Menuconfig will display larger menus on screens or xterms which are\n"
@@ -148,8 +146,8 @@
"\n"
"Optional personality available\n"
"------------------------------\n"
-"If you prefer to have all of the options listed in a single menu, rather\n"
-"than the default multimenu hierarchy, run the menuconfig with\n"
+"If you prefer to have all of the options listed in a single menu,\n"
+"rather than the default multimenu hierarchy, run the menuconfig with\n"
"MENUCONFIG_MODE environment variable set to single_menu. Example:\n"
"\n"
"make MENUCONFIG_MODE=single_menu menuconfig\n"
@@ -172,7 +170,7 @@
" mono => selects colors suitable for monochrome displays\n"
" blackbg => selects a color scheme with black background\n"
" classic => theme with blue background. The classic look\n"
-" bluetitle => a LCD friendly version of classic. (default)\n"
+" bluetitle => an LCD friendly version of classic. (default)\n"
"\n"),
menu_instructions[] = N_(
"Arrow keys navigate the menu. "
@@ -238,24 +236,24 @@
"Symbol: FOO [=m]\n"
"Type : tristate\n"
"Prompt: Foo bus is used to drive the bar HW\n"
- " Defined at drivers/pci/Kconfig:47\n"
- " Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
" Location:\n"
" -> Bus options (PCI, PCMCIA, EISA, ISA)\n"
" -> PCI support (PCI [=y])\n"
"(1) -> PCI access mode (<choice> [=y])\n"
+ " Defined at drivers/pci/Kconfig:47\n"
+ " Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
" Selects: LIBCRC32\n"
- " Selected by: BAR\n"
+ " Selected by: BAR [=n]\n"
"-----------------------------------------------------------------\n"
"o The line 'Type:' shows the type of the configuration option for\n"
" this symbol (boolean, tristate, string, ...)\n"
"o The line 'Prompt:' shows the text used in the menu structure for\n"
" this symbol\n"
- "o The 'Defined at' line tell at what file / line number the symbol\n"
+ "o The 'Defined at' line tells at what file / line number the symbol\n"
" is defined\n"
- "o The 'Depends on:' line tell what symbols needs to be defined for\n"
+ "o The 'Depends on:' line tells what symbols need to be defined for\n"
" this symbol to be visible in the menu (selectable)\n"
- "o The 'Location:' lines tell where in the menu structure this symbol\n"
+ "o The 'Location:' lines tells where in the menu structure this symbol\n"
" is located\n"
" A location followed by a [=y] indicates that this is a\n"
" selectable menu item - and the current value is displayed inside\n"
@@ -263,9 +261,9 @@
" Press the key in the (#) prefix to jump directly to that\n"
" location. You will be returned to the current search results\n"
" after exiting this new menu.\n"
- "o The 'Selects:' line tell what symbol will be automatically\n"
+ "o The 'Selects:' line tells what symbols will be automatically\n"
" selected if this symbol is selected (y or m)\n"
- "o The 'Selected by' line tell what symbol has selected this symbol\n"
+ "o The 'Selected by' line tells what symbol has selected this symbol\n"
"\n"
"Only relevant lines are shown.\n"
"\n\n"
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index c1d5320..db1512a 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -119,9 +119,10 @@
sym->type = type;
return;
}
- menu_warn(current_entry, "type of '%s' redefined from '%s' to '%s'",
- sym->name ? sym->name : "<choice>",
- sym_type_name(sym->type), sym_type_name(type));
+ menu_warn(current_entry,
+ "ignoring type redefinition of '%s' from '%s' to '%s'",
+ sym->name ? sym->name : "<choice>",
+ sym_type_name(sym->type), sym_type_name(type));
}
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep)
@@ -583,7 +584,7 @@
for (j = 4; --i >= 0; j += 2) {
menu = submenu[i];
if (head && location && menu == location)
- jump->offset = r->len - 1;
+ jump->offset = strlen(r->s);
str_printf(r, "%*c-> %s", j, ' ',
_(menu_get_prompt(menu)));
if (menu->sym) {
@@ -597,7 +598,7 @@
}
/*
- * get peoperty of type P_SYMBOL
+ * get property of type P_SYMBOL
*/
static struct property *get_symbol_prop(struct symbol *sym)
{
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 1500c38..9d3b04b 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -69,6 +69,11 @@
return QString::fromLocal8Bit(gettext(str.latin1()));
}
+ConfigSettings::ConfigSettings()
+ : QSettings("kernel.org", "qconf")
+{
+}
+
/**
* Reads a list of integer values from the application settings.
*/
diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h
index 3715b3e..bde0c6b 100644
--- a/scripts/kconfig/qconf.h
+++ b/scripts/kconfig/qconf.h
@@ -32,6 +32,7 @@
class ConfigSettings : public QSettings {
public:
+ ConfigSettings();
Q3ValueList<int> readSizes(const QString& key, bool *ok);
bool writeSizes(const QString& key, const Q3ValueList<int>& value);
};
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index c9a6775..7caabdb 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -1047,7 +1047,7 @@
* When we check for recursive dependencies we use a stack to save
* current state so we can print out relevant info to user.
* The entries are located on the call stack so no need to free memory.
- * Note inser() remove() must always match to properly clear the stack.
+ * Note insert() remove() must always match to properly clear the stack.
*/
static struct dep_stack {
struct dep_stack *prev, *next;
diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 6555a47..1a9f53e 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -68,7 +68,6 @@
}
%}
-ws [ \n\t]
n [A-Za-z0-9_]
%%
