/*
 * arch/arm/mach-at91/include/mach/at91_pmc.h
 *
 * Copyright (C) 2005 Ivan Kokshaysky
 * Copyright (C) SAN People
 *
 * Power Management Controller (PMC) - System peripherals registers.
 * Based on AT91RM9200 datasheet revision E.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#ifndef AT91_PMC_H
#define AT91_PMC_H

#ifndef __ASSEMBLY__
extern void __iomem *at91_pmc_base;

#define at91_pmc_read(field) \
	__raw_readl(at91_pmc_base + field)

#define at91_pmc_write(field, value) \
	__raw_writel(value, at91_pmc_base + field)
#else
.extern at91_pmc_base
#endif

#define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
#define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */

#define	AT91_PMC_SCSR		0x08			/* System Clock Status Register */
#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
#define		AT91_PMC_PCK4		(1 << 12)		/* Programmable Clock 4 [AT572D940HF only] */
#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */

#define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
#define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
#define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */

#define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */

#define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
#define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
#define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
#define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
#define		AT91_PMC_OSCOUNT	(0xff <<  8)		/* Main Oscillator Start-up Time */
#define		AT91_PMC_KEY		(0x37 << 16)		/* MOR Writing Key */
#define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
#define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */

#define	AT91_CKGR_MCFR		0x24			/* Main Clock Frequency Register */
#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */

#define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
#define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
#define		AT91_PMC_MUL_GET(n)	((n) >> 16 & 0x7ff)
#define		AT91_PMC3_MUL		(0x7f  << 18)		/* PLL Multiplier [SAMA5 only] */
#define		AT91_PMC3_MUL_GET(n)	((n) >> 18 & 0x7f)
#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
#define			AT91_PMC_USBDIV_1		(0 << 28)
#define			AT91_PMC_USBDIV_2		(1 << 28)
#define			AT91_PMC_USBDIV_4		(2 << 28)
#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */

#define	AT91_PMC_MCKR		0x30			/* Master Clock Register */
#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
#define			AT91_PMC_CSS_SLOW		(0 << 0)
#define			AT91_PMC_CSS_MAIN		(1 << 0)
#define			AT91_PMC_CSS_PLLA		(2 << 0)
#define			AT91_PMC_CSS_PLLB		(3 << 0)
#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
#define		PMC_PRES_OFFSET		2
#define		AT91_PMC_PRES		(7 <<  PMC_PRES_OFFSET)		/* Master Clock Prescaler */
#define			AT91_PMC_PRES_1			(0 << PMC_PRES_OFFSET)
#define			AT91_PMC_PRES_2			(1 << PMC_PRES_OFFSET)
#define			AT91_PMC_PRES_4			(2 << PMC_PRES_OFFSET)
#define			AT91_PMC_PRES_8			(3 << PMC_PRES_OFFSET)
#define			AT91_PMC_PRES_16		(4 << PMC_PRES_OFFSET)
#define			AT91_PMC_PRES_32		(5 << PMC_PRES_OFFSET)
#define			AT91_PMC_PRES_64		(6 << PMC_PRES_OFFSET)
#define		PMC_ALT_PRES_OFFSET	4
#define		AT91_PMC_ALT_PRES	(7 <<  PMC_ALT_PRES_OFFSET)		/* Master Clock Prescaler [alternate location] */
#define			AT91_PMC_ALT_PRES_1		(0 << PMC_ALT_PRES_OFFSET)
#define			AT91_PMC_ALT_PRES_2		(1 << PMC_ALT_PRES_OFFSET)
#define			AT91_PMC_ALT_PRES_4		(2 << PMC_ALT_PRES_OFFSET)
#define			AT91_PMC_ALT_PRES_8		(3 << PMC_ALT_PRES_OFFSET)
#define			AT91_PMC_ALT_PRES_16		(4 << PMC_ALT_PRES_OFFSET)
#define			AT91_PMC_ALT_PRES_32		(5 << PMC_ALT_PRES_OFFSET)
#define			AT91_PMC_ALT_PRES_64		(6 << PMC_ALT_PRES_OFFSET)
#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
#define			AT91_PMC_PDIV_1			(0 << 12)
#define			AT91_PMC_PDIV_2			(1 << 12)
#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
#define			AT91_PMC_PLLADIV2_ON		(1 << 12)

#define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
#define			AT91_PMC_USBS_PLLA		(0 << 0)
#define			AT91_PMC_USBS_UPLL		(1 << 0)
#define			AT91_PMC_USBS_PLLB		(1 << 0)	/* [AT91SAMN12 only] */
#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
#define			AT91_PMC_OHCIUSBDIV_1	(0x0 <<  8)
#define			AT91_PMC_OHCIUSBDIV_2	(0x1 <<  8)

#define	AT91_PMC_SMD		0x3c			/* Soft Modem Clock Register [some SAM9 only] */
#define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
#define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
#define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)

#define	AT91_PMC_PCKR(n)	(0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
#define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
#define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
#define			AT91_PMC_CSSMCK_MCK		(1 << 8)

#define	AT91_PMC_IER		0x60			/* Interrupt Enable Register */
#define	AT91_PMC_IDR		0x64			/* Interrupt Disable Register */
#define	AT91_PMC_SR		0x68			/* Status Register */
#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9] */
#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
#define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
#define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
#define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
#define	AT91_PMC_IMR		0x6c			/* Interrupt Mask Register */

#define AT91_PMC_PROT		0xe4			/* Write Protect Mode Register [some SAM9] */
#define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
#define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
#define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */

#define AT91_PMC_WPSR		0xe8			/* Write Protect Status Register [some SAM9] */
#define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
#define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */

#define AT91_PMC_PCER1		0x100			/* Peripheral Clock Enable Register 1 [SAMA5 only]*/
#define AT91_PMC_PCDR1		0x104			/* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCSR1		0x108			/* Peripheral Clock Enable Register 1 */

#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9 and SAMA5] */
#define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command (read=0, write=1) */
#define		AT91_PMC_PCR_DIV(n)	((n)  <<  16)		/* Divisor Value */
#define			AT91_PMC_PCR_DIV0	0x0			/* Peripheral clock is MCK */
#define			AT91_PMC_PCR_DIV2	0x1			/* Peripheral clock is MCK/2 */
#define			AT91_PMC_PCR_DIV4	0x2			/* Peripheral clock is MCK/4 */
#define			AT91_PMC_PCR_DIV8	0x3			/* Peripheral clock is MCK/8 */
#define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */

#endif