[POWERPC] Add missing spaces in printk formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index f0f49d1..965bfcc 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -108,7 +108,7 @@
if (size > 0x10000)
size = 0x10000;
- printk(KERN_ERR "no ISA IO ranges or unexpected isa range,"
+ printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
"mapping 64k\n");
__ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
@@ -116,7 +116,7 @@
return;
inval_range:
- printk(KERN_ERR "no ISA IO ranges or unexpected isa range,"
+ printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
"mapping 64k\n");
__ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
0x10000, _PAGE_NO_CACHE|_PAGE_GUARDED);
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 8135da0..10dda22 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -189,7 +189,7 @@
return SIGSEGV;
/* in_atomic() in user mode is really bad,
as is current->mm == NULL. */
- printk(KERN_EMERG "Page fault in user mode with"
+ printk(KERN_EMERG "Page fault in user mode with "
"in_atomic() = %d mm = %p\n", in_atomic(), mm);
printk(KERN_EMERG "NIP = %lx MSR = %lx\n",
regs->nip, regs->msr);
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index d35eda8..ba645c2 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -120,7 +120,7 @@
ppc_tb_freq /= 16;
ppc_proc_freq = 50000000;
if (!get_freq("clock-frequency", &ppc_proc_freq))
- printk(KERN_ERR "WARNING: Estimating processor frequency"
+ printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
diff --git a/arch/powerpc/platforms/celleb/io-workarounds.c b/arch/powerpc/platforms/celleb/io-workarounds.c
index 2b91214..32b9cec 100644
--- a/arch/powerpc/platforms/celleb/io-workarounds.c
+++ b/arch/powerpc/platforms/celleb/io-workarounds.c
@@ -256,7 +256,7 @@
celleb_dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!celleb_dummy_page_va) {
- printk(KERN_ERR "Celleb: dummy read disabled."
+ printk(KERN_ERR "Celleb: dummy read disabled. "
"Alloc celleb_dummy_page_va failed\n");
return 1;
}
diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c
index 9d07642..a3c7cfb 100644
--- a/arch/powerpc/platforms/celleb/scc_epci.c
+++ b/arch/powerpc/platforms/celleb/scc_epci.c
@@ -95,7 +95,7 @@
private->dummy_page_da = dma_map_single(hose->parent,
celleb_dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE);
if (private->dummy_page_da == DMA_ERROR_CODE) {
- printk(KERN_ERR "EPCI: dummy read disabled."
+ printk(KERN_ERR "EPCI: dummy read disabled. "
"Map dummy page failed.\n");
return;
}
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 33df4c3..87e58e0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -222,7 +222,7 @@
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
}
- printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx."
+ printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
