diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c19f6fe..db7a4f4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1597,30 +1597,6 @@
 	  Driver for CastleRock integrated graphics core in the
 	  VIA VT8623 [Apollo CLE266] chipset.
 
-config FB_CYBLA
-	tristate "Cyberblade/i1 support"
-	depends on FB && PCI && X86_32 && !64BIT
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This driver is supposed to support the Trident Cyberblade/i1
-	  graphics core integrated in the VIA VT8601A North Bridge,
-	  also known as VIA Apollo PLE133.
-
-	  Status:
-	   - Developed, tested and working on EPIA 5000 and EPIA 800.
-	   - Does work reliable on all systems with CRT/LCD connected to
-	     normal VGA ports.
-	   - Should work on systems that do use the internal LCD port, but
-	     this is absolutely not tested.
-
-	  Character imageblit, copyarea and rectangle fill are hw accelerated,
-	  ypan scrolling is used by default.
-
-	  Please do read <file:Documentation/fb/cyblafb/*>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cyblafb.
-
 config FB_TRIDENT
 	tristate "Trident support"
 	depends on FB && PCI
@@ -1633,8 +1609,8 @@
 	  and Blade XP.
 	  There are also integrated versions of these chips called CyberXXXX,
 	  CyberImage or CyberBlade. These chips are mostly found in laptops
-	  but also on some motherboards. For more information, read
-	  <file:Documentation/fb/tridentfb.txt>
+	  but also on some motherboards including early VIA EPIA motherboards.
+	  For more information, read <file:Documentation/fb/tridentfb.txt>
 
 	  Say Y if you have such a graphics board.
 
diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
deleted file mode 100644
index 9704b73..0000000
--- a/drivers/video/cyblafb.c
+++ /dev/null
@@ -1,1683 +0,0 @@
-/*
- * Frame buffer driver for Trident Cyberblade/i1 graphics core
- *
- * Copyright 2005 Knut Petersen <Knut_Petersen@t-online.de>
- *
- * CREDITS:
- *	tridentfb.c by Jani Monoses
- *	see files above for further credits
- *
- */
-
-#define CYBLAFB_DEBUG 0
-#define CYBLAFB_KD_GRAPHICS_QUIRK 1
-
-#define CYBLAFB_PIXMAPSIZE 8192
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/types.h>
-#include <video/cyblafb.h>
-
-#define VERSION "0.62"
-
-struct cyblafb_par {
-	u32 pseudo_pal[16];
-	struct fb_ops ops;
-};
-
-static struct fb_fix_screeninfo cyblafb_fix __devinitdata = {
-	.id = "CyBla",
-	.type = FB_TYPE_PACKED_PIXELS,
-	.xpanstep = 1,
-	.ypanstep = 1,
-	.ywrapstep = 1,
-	.visual = FB_VISUAL_PSEUDOCOLOR,
-	.accel = FB_ACCEL_NONE,
-};
-
-static char *mode __devinitdata = NULL;
-static int bpp __devinitdata = 8;
-static int ref __devinitdata = 75;
-static int fp __devinitdata;
-static int crt __devinitdata;
-static int memsize __devinitdata;
-
-static int basestride;
-static int vesafb;
-static int nativex;
-static int center;
-static int stretch;
-static int pciwb = 1;
-static int pcirb = 1;
-static int pciwr = 1;
-static int pcirr = 1;
-static int disabled;
-static int verbosity;
-static int displaytype;
-
-static void __iomem *io_virt;	// iospace virtual memory address
-
-module_param(mode, charp, 0);
-module_param(bpp, int, 0);
-module_param(ref, int, 0);
-module_param(fp, int, 0);
-module_param(crt, int, 0);
-module_param(nativex, int, 0);
-module_param(center, int, 0);
-module_param(stretch, int, 0);
-module_param(pciwb, int, 0);
-module_param(pcirb, int, 0);
-module_param(pciwr, int, 0);
-module_param(pcirr, int, 0);
-module_param(memsize, int, 0);
-module_param(verbosity, int, 0);
-
-//=========================================
-//
-// Well, we have to fix the upper layers.
-// Until this has been done, we work around
-// the bugs.
-//
-//=========================================
-
-#if (CYBLAFB_KD_GRAPHICS_QUIRK && CYBLAFB_DEBUG)
-	if (disabled) { \
-		printk("********\n");\
-		dump_stack();\
-		return val;\
-	}
-
-#elif CYBLAFB_KD_GRAPHICS_QUIRK
-#define KD_GRAPHICS_RETURN(val)\
-	if (disabled) {\
-		return val;\
-	}
-#else
-#define KD_GRAPHICS_RETURN(val)
-#endif
-
-//=========================================
-//
-// Port access macros for memory mapped io
-//
-//=========================================
-
-#define out8(r, v) writeb(v, io_virt + r)
-#define out32(r, v) writel(v, io_virt + r)
-#define in8(r) readb(io_virt + r)
-#define in32(r) readl(io_virt + r)
-
-//======================================
-//
-// Hardware access inline functions
-//
-//======================================
-
-static inline u8 read3X4(u32 reg)
-{
-	out8(0x3D4, reg);
-	return in8(0x3D5);
-}
-
-static inline u8 read3C4(u32 reg)
-{
-	out8(0x3C4, reg);
-	return in8(0x3C5);
-}
-
-static inline u8 read3CE(u32 reg)
-{
-	out8(0x3CE, reg);
-	return in8(0x3CF);
-}
-
-static inline void write3X4(u32 reg, u8 val)
-{
-	out8(0x3D4, reg);
-	out8(0x3D5, val);
-}
-
-static inline void write3C4(u32 reg, u8 val)
-{
-	out8(0x3C4, reg);
-	out8(0x3C5, val);
-}
-
-static inline void write3CE(u32 reg, u8 val)
-{
-	out8(0x3CE, reg);
-	out8(0x3CF, val);
-}
-
-static inline void write3C0(u32 reg, u8 val)
-{
-	in8(0x3DA);		// read to reset index
-	out8(0x3C0, reg);
-	out8(0x3C0, val);
-}
-
-//=================================================
-//
-// Enable memory mapped io and unprotect registers
-//
-//=================================================
-
-static void enable_mmio(void)
-{
-	u8 tmp;
-
-	outb(0x0B, 0x3C4);
-	inb(0x3C5);		// Set NEW mode
-	outb(SR0E, 0x3C4);	// write enable a lot of extended ports
-	outb(0x80, 0x3C5);
-
-	outb(SR11, 0x3C4);	// write enable those extended ports that
-	outb(0x87, 0x3C5);	// are not affected by SR0E_New
-
-	outb(CR1E, 0x3d4);	// clear write protect bit for port 0x3c2
-	tmp = inb(0x3d5) & 0xBF;
-	outb(CR1E, 0x3d4);
-	outb(tmp, 0x3d5);
-
-	outb(CR39, 0x3D4);
-	outb(inb(0x3D5) | 0x01, 0x3D5); // Enable mmio
-}
-
-//=================================================
-//
-// Set pixel clock VCLK1
-// - multipliers set elswhere
-// - freq in units of 0.01 MHz
-//
-// Hardware bug: SR18 >= 250 is broken for the
-//		 cyberblade/i1
-//
-//=================================================
-
-static void set_vclk(struct cyblafb_par *par, int freq)
-{
-	u32 m, n, k;
-	int f, fi, d, di;
-	u8 lo = 0, hi = 0;
-
-	d = 2000;
-	k = freq >= 10000 ? 0 : freq >= 5000 ? 1 : freq >= 2500 ? 2 : 3;
-	for (m = 0; m < 64; m++)
-		for (n = 0; n < 250; n++) {
-			fi = (int)(((5864727 * (n + 8)) /
-				    ((m + 2) * (1 << k))) >> 12);
-			if ((di = abs(fi - freq)) < d) {
-				d = di;
-				f = fi;
-				lo = (u8) n;
-				hi = (u8) ((k << 6) | m);
-			}
-		}
-	write3C4(SR19, hi);
-	write3C4(SR18, lo);
-	if (verbosity > 0)
-		output("pixclock = %d.%02d MHz, k/m/n %x %x %x\n",
-		       freq / 100, freq % 100, (hi & 0xc0) >> 6, hi & 0x3f, lo);
-}
-
-//================================================
-//
-// Cyberblade specific Graphics Engine (GE) setup
-//
-//================================================
-
-static void cyblafb_setup_GE(int pitch, int bpp)
-{
-	KD_GRAPHICS_RETURN();
-
-	switch (bpp) {
-	case 8:
-		basestride = ((pitch >> 3) << 20) | (0 << 29);
-		break;
-	case 15:
-		basestride = ((pitch >> 3) << 20) | (5 << 29);
-		break;
-	case 16:
-		basestride = ((pitch >> 3) << 20) | (1 << 29);
-		break;
-	case 24:
-	case 32:
-		basestride = ((pitch >> 3) << 20) | (2 << 29);
-		break;
-	}
-
-	write3X4(CR36, 0x90);	// reset GE
-	write3X4(CR36, 0x80);	// enable GE
-	out32(GE24, 1 << 7);	// reset all GE pointers by toggling
-	out32(GE24, 0); 	//   d7 of GE24
-	write3X4(CR2D, 0x00);	// GE Timinigs, no delays
-	out32(GE6C, 0); 	// Pattern and Style, p 129, ok
-}
-
-//=====================================================================
-//
-// Cyberblade specific syncing
-//
-//   A timeout might be caused by disabled mmio.
-//   Cause:
-//     - bit CR39 & 1 == 0 upon return, X trident driver bug
-//     - kdm bug (KD_GRAPHICS not set on first switch)
-//     - kernel design flaw (it believes in the correctness
-//	 of kdm/X
-//   First we try to sync ignoring that problem, as most of the
-//   time that will succeed immediately and the enable_mmio()
-//   would only degrade performance.
-//
-//=====================================================================
-
-static int cyblafb_sync(struct fb_info *info)
-{
-	u32 status, i = 100000;
-
-	KD_GRAPHICS_RETURN(0);
-
-	while (((status = in32(GE20)) & 0xFe800000) && i != 0)
-		i--;
-
-	if (i == 0) {
-		enable_mmio();
-		i = 1000000;
-		while (((status = in32(GE20)) & 0xFA800000) && i != 0)
-			i--;
-		if (i == 0) {
-			output("GE Timeout, status: %x\n", status);
-			if (status & 0x80000000)
-				output("Bresenham Engine : Busy\n");
-			if (status & 0x40000000)
-				output("Setup Engine     : Busy\n");
-			if (status & 0x20000000)
-				output("SP / DPE         : Busy\n");
-			if (status & 0x10000000)
-				output("Memory Interface : Busy\n");
-			if (status & 0x08000000)
-				output("Com Lst Proc     : Busy\n");
-			if (status & 0x04000000)
-				output("Block Write      : Busy\n");
-			if (status & 0x02000000)
-				output("Command Buffer   : Full\n");
-			if (status & 0x01000000)
-				output("RESERVED         : Busy\n");
-			if (status & 0x00800000)
-				output("PCI Write Buffer : Busy\n");
-			cyblafb_setup_GE(info->var.xres,
-					 info->var.bits_per_pixel);
-		}
-	}
-
-	return 0;
-}
-
-//==============================
-//
-// Cyberblade specific fillrect
-//
-//==============================
-
-static void cyblafb_fillrect(struct fb_info *info, const struct fb_fillrect *fr)
-{
-	u32 bpp = info->var.bits_per_pixel, col, desty, height;
-
-	KD_GRAPHICS_RETURN();
-
-	switch (bpp) {
-	default:
-	case 8:
-		col = fr->color;
-		col |= col << 8;
-		col |= col << 16;
-		break;
-	case 16:
-		col = ((u32 *) (info->pseudo_palette))[fr->color];
-		col |= col << 16;
-		break;
-	case 32:
-		col = ((u32 *) (info->pseudo_palette))[fr->color];
-		break;
-	}
-
-	desty = fr->dy;
-	height = fr->height;
-	while (height) {
-		out32(GEB8, basestride | ((desty * info->var.xres_virtual *
-					   bpp) >> 6));
-		out32(GE60, col);
-		out32(GE48, fr->rop ? 0x66 : ROP_S);
-		out32(GE44, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
-		out32(GE08, point(fr->dx, 0));
-		out32(GE0C, point(fr->dx + fr->width - 1,
-				  height > 4096 ? 4095 : height - 1));
-		if (likely(height <= 4096))
-			return;
-		desty += 4096;
-		height -= 4096;
-	}
-}
-
-//================================================
-//
-// Cyberblade specific copyarea
-//
-// This function silently assumes that it never
-// will be called with width or height exceeding
-// 4096.
-//
-//================================================
-
-static void cyblafb_copyarea(struct fb_info *info, const struct fb_copyarea *ca)
-{
-	u32 s1, s2, d1, d2, direction;
-
-	KD_GRAPHICS_RETURN();
-
-	s1 = point(ca->sx, 0);
-	s2 = point(ca->sx + ca->width - 1, ca->height - 1);
-	d1 = point(ca->dx, 0);
-	d2 = point(ca->dx + ca->width - 1, ca->height - 1);
-
-	if ((ca->sy > ca->dy) || ((ca->sy == ca->dy) && (ca->sx > ca->dx)))
-		direction = 0;
-	else
-		direction = 2;
-
-	out32(GEB8, basestride | ((ca->dy * info->var.xres_virtual *
-				   info->var.bits_per_pixel) >> 6));
-	out32(GEC8, basestride | ((ca->sy * info->var.xres_virtual *
-				   info->var.bits_per_pixel) >> 6));
-	out32(GE44, 0xa0000000 | 1 << 19 | 1 << 2 | direction);
-	out32(GE00, direction ? s2 : s1);
-	out32(GE04, direction ? s1 : s2);
-	out32(GE08, direction ? d2 : d1);
-	out32(GE0C, direction ? d1 : d2);
-}
-
-//=======================================================================
-//
-// Cyberblade specific imageblit
-//
-// Accelerated for the most usual case, blitting 1 - bit deep
-// character images. Everything else is passed to the generic imageblit
-// unless it is so insane that it is better to printk an alert.
-//
-// Hardware bug: _Never_ blit across pixel column 2048, that will lock
-// the system. We split those blit requests into three blitting
-// operations.
-//
-//=======================================================================
-
-static void cyblafb_imageblit(struct fb_info *info,
-			      const struct fb_image *image)
-{
-	u32 fgcol, bgcol;
-	u32 *pd = (u32 *) image->data;
-	u32 bpp = info->var.bits_per_pixel;
-
-	KD_GRAPHICS_RETURN();
-
-	// Used only for drawing the penguine (image->depth > 1)
-	if (image->depth != 1) {
-		cfb_imageblit(info, image);
-		return;
-	}
-	// That should never happen, but it would be fatal
-	if (image->width == 0 || image->height == 0) {
-		output("imageblit: width/height 0 detected\n");
-		return;
-	}
-
-	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
-	    info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
-		fgcol = ((u32 *) (info->pseudo_palette))[image->fg_color];
-		bgcol = ((u32 *) (info->pseudo_palette))[image->bg_color];
-	} else {
-		fgcol = image->fg_color;
-		bgcol = image->bg_color;
-	}
-
-	switch (bpp) {
-	case 8:
-		fgcol |= fgcol << 8;
-		bgcol |= bgcol << 8;
-	case 16:
-		fgcol |= fgcol << 16;
-		bgcol |= bgcol << 16;
-	default:
-		break;
-	}
-
-	out32(GEB8, basestride | ((image->dy * info->var.xres_virtual *
-				   bpp) >> 6));
-	out32(GE60, fgcol);
-	out32(GE64, bgcol);
-
-	if (!(image->dx < 2048 && (image->dx + image->width - 1) >= 2048)) {
-		u32 dds = ((image->width + 31) >> 5) * image->height;
-		out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-		out32(GE08, point(image->dx, 0));
-		out32(GE0C, point(image->dx + image->width - 1,
-				  image->height - 1));
-		while (dds--)
-			out32(GE9C, *pd++);
-	} else {
-		int i, j;
-		u32 ddstotal = (image->width + 31) >> 5;
-		u32 ddsleft = (2048 - image->dx + 31) >> 5;
-		u32 skipleft = ddstotal - ddsleft;
-
-		out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-		out32(GE08, point(image->dx, 0));
-		out32(GE0C, point(2048 - 1, image->height - 1));
-		for (i = 0; i < image->height; i++) {
-			for (j = 0; j < ddsleft; j++)
-				out32(GE9C, *pd++);
-			pd += skipleft;
-		}
-
-		if (image->dx % 32) {
-			out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-			out32(GE08, point(2048, 0));
-			if (image->width > ddsleft << 5)
-				out32(GE0C, point(image->dx + (ddsleft << 5) -
-						  1, image->height - 1));
-			else
-				out32(GE0C, point(image->dx + image->width - 1,
-						  image->height - 1));
-			pd = ((u32 *) image->data) + ddstotal - skipleft - 1;
-			for (i = 0; i < image->height; i++) {
-				out32(GE9C, swab32(swab32(*pd) << ((32 -
-					    (image->dx & 31)) & 31)));
-				pd += ddstotal;
-			}
-		}
-
-		if (skipleft) {
-			out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-			out32(GE08, point(image->dx + (ddsleft << 5), 0));
-			out32(GE0C, point(image->dx + image->width - 1,
-					  image->height - 1));
-			pd = (u32 *) image->data;
-			for (i = 0; i < image->height; i++) {
-				pd += ddsleft;
-				for (j = 0; j < skipleft; j++)
-					out32(GE9C, *pd++);
-			}
-		}
-	}
-}
-
-//==========================================================
-//
-// Check if video mode is acceptable. We change var->??? if
-// video mode is slightly off or return error otherwise.
-// info->??? must not be changed!
-//
-//==========================================================
-
-static int cyblafb_check_var(struct fb_var_screeninfo *var,
-			     struct fb_info *info)
-{
-	int bpp = var->bits_per_pixel;
-
-	//
-	// we try to support 8, 16, 24 and 32 bpp modes,
-	// default to 8
-	//
-	// there is a 24 bpp mode, but for now we change requests to 32 bpp
-	// (This is what tridentfb does ... will be changed in the future)
-	//
-	//
-	if (bpp % 8 != 0 || bpp < 8 || bpp > 32)
-		bpp = 8;
-	if (bpp == 24)
-		bpp = var->bits_per_pixel = 32;
-
-	//
-	// interlaced modes are broken, fail if one is requested
-	//
-	if (var->vmode & FB_VMODE_INTERLACED)
-		return -EINVAL;
-
-	//
-	// fail if requested resolution is higher than physical
-	// flatpanel resolution
-	//
-	if ((displaytype == DISPLAY_FP) && nativex && var->xres > nativex)
-		return -EINVAL;
-
-	//
-	// we do not allow vclk to exceed 230 MHz. If the requested
-	// vclk is too high, we default to 200 MHz
-	//
-	if ((bpp == 32 ? 200000000 : 100000000) / var->pixclock > 23000)
-		var->pixclock = (bpp == 32 ? 200000000 : 100000000) / 20000;
-
-	//
-	// enforce (h|v)sync_len limits
-	//
-	var->hsync_len &= ~7;
-	if(var->hsync_len > 248)
-		var->hsync_len = 248;
-
-	var->vsync_len &= 15;
-
-	//
-	// Enforce horizontal and vertical hardware limits.
-	// 1600x1200 is mentioned as a maximum, but higher resolutions could
-	// work with slow refresh, small margins and short sync.
-	//
-	var->xres &= ~7;
-
-	if (((var->xres + var->left_margin + var->right_margin +
-			var->hsync_len) > (bpp == 32 ? 2040 : 4088)) ||
-			((var->yres + var->upper_margin + var->lower_margin +
-			var->vsync_len) > 2047))
-		return -EINVAL;
-
-	if ((var->xres > 1600) || (var->yres > 1200))
-		output("Mode %dx%d exceeds documented limits.\n",
-					   var->xres, var->yres);
-	//
-	// try to be smart about (x|y)res_virtual problems.
-	//
-	if (var->xres > var->xres_virtual)
-		var->xres_virtual = var->xres;
-	if (var->yres > var->yres_virtual)
-		var->yres_virtual = var->yres;
-
-	if (bpp == 8 || bpp == 16) {
-		if (var->xres_virtual > 4088)
-			var->xres_virtual = 4088;
-	} else {
-		if (var->xres_virtual > 2040)
-			var->xres_virtual = 2040;
-	}
-	var->xres_virtual &= ~7;
-	while (var->xres_virtual * var->yres_virtual * bpp / 8 >
-	       info->fix.smem_len) {
-		if (var->yres_virtual > var->yres)
-			var->yres_virtual--;
-		else if (var->xres_virtual > var->xres)
-			var->xres_virtual -= 8;
-		else
-			return -EINVAL;
-	}
-
-	switch (bpp) {
-	case 8:
-		var->red.offset = 0;
-		var->green.offset = 0;
-		var->blue.offset = 0;
-		var->red.length = 6;
-		var->green.length = 6;
-		var->blue.length = 6;
-		break;
-	case 16:
-		var->red.offset = 11;
-		var->green.offset = 5;
-		var->blue.offset = 0;
-		var->red.length = 5;
-		var->green.length = 6;
-		var->blue.length = 5;
-		break;
-	case 32:
-		var->red.offset = 16;
-		var->green.offset = 8;
-		var->blue.offset = 0;
-		var->red.length = 8;
-		var->green.length = 8;
-		var->blue.length = 8;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-//=====================================================================
-//
-// Pan the display
-//
-// The datasheets defines crt start address to be 20 bits wide and
-// to be programmed to CR0C, CR0D, CR1E and CR27. Actually there is
-// CR2B[5] as an undocumented extension bit. Epia BIOS 2.07 does use
-// it, so it is also safe to be used here. BTW: datasheet CR0E on page
-// 90 really is CR1E, the real CRE is documented on page 72.
-//
-// BUT:
-//
-// As of internal version 0.60 we do not use vga panning any longer.
-// Vga panning did not allow us the use of all available video memory
-// and thus prevented ywrap scrolling. We do use the "right view"
-// register now.
-//
-//
-//=====================================================================
-
-static int cyblafb_pan_display(struct fb_var_screeninfo *var,
-			       struct fb_info *info)
-{
-	KD_GRAPHICS_RETURN(0);
-
-	info->var.xoffset = var->xoffset;
-	info->var.yoffset = var->yoffset;
-	out32(GE10, 0x80000000 | ((var->xoffset + (var->yoffset *
-		    var->xres_virtual)) * var->bits_per_pixel / 32));
-	return 0;
-}
-
-//============================================
-//
-// This will really help in case of a bug ...
-// dump most gaphics core registers.
-//
-//============================================
-
-static void regdump(struct cyblafb_par *par)
-{
-	int i;
-
-	if (verbosity < 2)
-		return;
-
-	printk("\n");
-	for (i = 0; i <= 0xff; i++) {
-		outb(i, 0x3d4);
-		printk("CR%02x=%02x ", i, inb(0x3d5));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-
-	outb(0x30, 0x3ce);
-	outb(inb(0x3cf) | 0x40, 0x3cf);
-	for (i = 0; i <= 0x1f; i++) {
-		if (i == 0 || (i > 2 && i < 8) || i == 0x10 || i == 0x11
-		    || i == 0x16) {
-			outb(i, 0x3d4);
-			printk("CR%02x=%02x ", i, inb(0x3d5));
-		} else
-			printk("------- ");
-		if (i % 16 == 15)
-			printk("\n");
-	}
-	outb(0x30, 0x3ce);
-	outb(inb(0x3cf) & 0xbf, 0x3cf);
-
-	printk("\n");
-	for (i = 0; i <= 0x7f; i++) {
-		outb(i, 0x3ce);
-		printk("GR%02x=%02x ", i, inb(0x3cf));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-
-	printk("\n");
-	for (i = 0; i <= 0xff; i++) {
-		outb(i, 0x3c4);
-		printk("SR%02x=%02x ", i, inb(0x3c5));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-
-	printk("\n");
-	for (i = 0; i <= 0x1F; i++) {
-		inb(0x3da);	// next access is index!
-		outb(i, 0x3c0);
-		printk("AR%02x=%02x ", i, inb(0x3c1));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-	printk("\n");
-
-	inb(0x3DA);		// reset internal flag to 3c0 index
-	outb(0x20, 0x3C0);	// enable attr
-
-	return;
-}
-
-//=======================================================================
-//
-// Save State
-//
-// This function is called while a switch to KD_TEXT is in progress,
-// before any of the other functions are called.
-//
-//=======================================================================
-
-static void cyblafb_save_state(struct fb_info *info)
-{
-	struct cyblafb_par *par = info->par;
-	if (verbosity > 0)
-		output("Switching to KD_TEXT\n");
-	disabled = 0;
-	regdump(par);
-	enable_mmio();
-	return;
-}
-
-//=======================================================================
-//
-// Restore State
-//
-// This function is called while a switch to KD_GRAPHICS is in progress,
-// We have to turn on vga style panning registers again because the
-// trident driver of X does not know about GE10.
-//
-//=======================================================================
-
-static void cyblafb_restore_state(struct fb_info *info)
-{
-	if (verbosity > 0)
-		output("Switching to KD_GRAPHICS\n");
-	out32(GE10, 0);
-	disabled = 1;
-	return;
-}
-
-//======================================
-//
-// Set hardware to requested video mode
-//
-//======================================
-
-static int cyblafb_set_par(struct fb_info *info)
-{
-	struct cyblafb_par *par = info->par;
-	u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart,
-	    hblankend, preendfetch, vtotal, vdispend, vsyncstart,
-	    vsyncend, vblankstart, vblankend;
-	struct fb_var_screeninfo *var = &info->var;
-	int bpp = var->bits_per_pixel;
-	int i;
-
-	KD_GRAPHICS_RETURN(0);
-
-	if (verbosity > 0)
-		output("Switching to new mode: "
-		       "fbset -g %d %d %d %d %d -t %d %d %d %d %d %d %d\n",
-		       var->xres, var->yres, var->xres_virtual,
-		       var->yres_virtual, var->bits_per_pixel, var->pixclock,
-		       var->left_margin, var->right_margin, var->upper_margin,
-		       var->lower_margin, var->hsync_len, var->vsync_len);
-
-	htotal = (var->xres + var->left_margin + var->right_margin +
-		  var->hsync_len) / 8 - 5;
-	hdispend = var->xres / 8 - 1;
-	hsyncstart = (var->xres + var->right_margin) / 8;
-	hsyncend = var->hsync_len / 8;
-	hblankstart = hdispend + 1;
-	hblankend = htotal + 3; // should be htotal + 5, bios does it this way
-	preendfetch = ((var->xres >> 3) + 1) * ((bpp + 1) >> 3);
-
-	vtotal = var->yres + var->upper_margin + var->lower_margin +
-							var->vsync_len - 2;
-	vdispend = var->yres - 1;
-	vsyncstart = var->yres + var->lower_margin;
-	vblankstart = var->yres;
-	vblankend = vtotal; // should be vtotal + 2, but bios does it this way
-	vsyncend = var->vsync_len;
-
-	enable_mmio();		// necessary! ... check X ...
-
-	write3X4(CR11, read3X4(CR11) & 0x7F);	// unlock cr00 .. cr07
-
-	write3CE(GR30, 8);
-
-	if ((displaytype == DISPLAY_FP) && var->xres < nativex) {
-
-		// stretch or center ?
-
-		out8(0x3C2, 0xEB);
-
-		write3CE(GR30, read3CE(GR30) | 0x81);	// shadow mode on
-
-		if (center) {
-			write3CE(GR52, (read3CE(GR52) & 0x7C) | 0x80);
-			write3CE(GR53, (read3CE(GR53) & 0x7C) | 0x80);
-		} else if (stretch) {
-			write3CE(GR5D, 0);
-			write3CE(GR52, (read3CE(GR52) & 0x7C) | 1);
-			write3CE(GR53, (read3CE(GR53) & 0x7C) | 1);
-		}
-
-	} else {
-		out8(0x3C2, 0x2B);
-		write3CE(GR30, 8);
-	}
-
-	//
-	// Setup CRxx regs
-	//
-
-	write3X4(CR00, htotal & 0xFF);
-	write3X4(CR01, hdispend & 0xFF);
-	write3X4(CR02, hblankstart & 0xFF);
-	write3X4(CR03, hblankend & 0x1F);
-	write3X4(CR04, hsyncstart & 0xFF);
-	write3X4(CR05, (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
-	write3X4(CR06, vtotal & 0xFF);
-	write3X4(CR07, (vtotal & 0x100) >> 8 |
-		       (vdispend & 0x100) >> 7 |
-		       (vsyncstart & 0x100) >> 6 |
-		       (vblankstart & 0x100) >> 5 |
-		       0x10 |
-		       (vtotal & 0x200) >> 4 |
-		       (vdispend & 0x200) >> 3 | (vsyncstart & 0x200) >> 2);
-	write3X4(CR08, 0);
-	write3X4(CR09, (vblankstart & 0x200) >> 4 | 0x40 |	// FIX !!!
-		       ((info->var.vmode & FB_VMODE_DOUBLE) ? 0x80 : 0));
-	write3X4(CR0A, 0);	// Init to some reasonable default
-	write3X4(CR0B, 0);	// Init to some reasonable default
-	write3X4(CR0C, 0);	// Offset 0
-	write3X4(CR0D, 0);	// Offset 0
-	write3X4(CR0E, 0);	// Init to some reasonable default
-	write3X4(CR0F, 0);	// Init to some reasonable default
-	write3X4(CR10, vsyncstart & 0xFF);
-	write3X4(CR11, (vsyncend & 0x0F));
-	write3X4(CR12, vdispend & 0xFF);
-	write3X4(CR13, ((info->var.xres_virtual * bpp) / (4 * 16)) & 0xFF);
-	write3X4(CR14, 0x40);	// double word mode
-	write3X4(CR15, vblankstart & 0xFF);
-	write3X4(CR16, vblankend & 0xFF);
-	write3X4(CR17, 0xE3);
-	write3X4(CR18, 0xFF);
-	//	 CR19: needed for interlaced modes ... ignore it for now
-	write3X4(CR1A, 0x07);	// Arbitration Control Counter 1
-	write3X4(CR1B, 0x07);	// Arbitration Control Counter 2
-	write3X4(CR1C, 0x07);	// Arbitration Control Counter 3
-	write3X4(CR1D, 0x00);	// Don't know, doesn't hurt ; -)
-	write3X4(CR1E, (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80);
-	//	 CR1F: do not set, contains BIOS info about memsize
-	write3X4(CR20, 0x20);	// enabe wr buf, disable 16bit planar mode
-	write3X4(CR21, 0x20);	// enable linear memory access
-	//	 CR22: RO cpu latch readback
-	//	 CR23: ???
-	//	 CR24: RO AR flag state
-	//	 CR25: RAMDAC rw timing, pclk buffer tristate control ????
-	//	 CR26: ???
-	write3X4(CR27, (vdispend & 0x400) >> 6 |
-		       (vsyncstart & 0x400) >> 5 |
-		       (vblankstart & 0x400) >> 4 |
-		       (vtotal & 0x400) >> 3 |
-		       0x8);
-	//	 CR28: ???
-	write3X4(CR29, (read3X4(CR29) & 0xCF) | ((((info->var.xres_virtual *
-			bpp) / (4 * 16)) & 0x300) >> 4));
-	write3X4(CR2A, read3X4(CR2A) | 0x40);
-	write3X4(CR2B, (htotal & 0x100) >> 8 |
-		       (hdispend & 0x100) >> 7 |
-		       // (0x00 & 0x100) >> 6 |   hinterlace para bit 8 ???
-		       (hsyncstart & 0x100) >> 5 |
-		       (hblankstart & 0x100) >> 4);
-	//	 CR2C: ???
-	//	 CR2D: initialized in cyblafb_setup_GE()
-	write3X4(CR2F, 0x92);	// conservative, better signal quality
-	//	 CR30: reserved
-	//	 CR31: reserved
-	//	 CR32: reserved
-	//	 CR33: reserved
-	//	 CR34: disabled in CR36
-	//	 CR35: disabled in CR36
-	//	 CR36: initialized in cyblafb_setup_GE
-	//	 CR37: i2c, ignore for now
-	write3X4(CR38, (bpp == 8) ? 0x00 :	//
-		       (bpp == 16) ? 0x05 :	// highcolor
-		       (bpp == 24) ? 0x29 :	// packed 24bit truecolor
-		       (bpp == 32) ? 0x09 : 0); // truecolor, 16 bit pixelbus
-	write3X4(CR39, 0x01 |	// MMIO enable
-		       (pcirb ? 0x02 : 0) |	// pci read burst enable
-		       (pciwb ? 0x04 : 0));	// pci write burst enable
-	write3X4(CR55, 0x1F | // pci clocks * 2 for STOP# during 1st data phase
-		       (pcirr ? 0x40 : 0) |	// pci read retry enable
-		       (pciwr ? 0x80 : 0));	// pci write retry enable
-	write3X4(CR56, preendfetch >> 8 < 2 ? (preendfetch >> 8 & 0x01) | 2
-					    : 0);
-	write3X4(CR57, preendfetch >> 8 < 2 ? preendfetch & 0xff : 0);
-	write3X4(CR58, 0x82);	// Bios does this .... don't know more
-	//
-	// Setup SRxx regs
-	//
-	write3C4(SR00, 3);
-	write3C4(SR01, 1);	//set char clock 8 dots wide
-	write3C4(SR02, 0x0F);	//enable 4 maps needed in chain4 mode
-	write3C4(SR03, 0);	//no character map select
-	write3C4(SR04, 0x0E);	//memory mode: ext mem, even, chain4
-
-	out8(0x3C4, 0x0b);
-	in8(0x3C5);		// Set NEW mode
-	write3C4(SR0D, 0x00);	// test ... check
-
-	set_vclk(par, (bpp == 32 ? 200000000 : 100000000)
-					/ info->var.pixclock);	//SR18, SR19
-
-	//
-	// Setup GRxx regs
-	//
-	write3CE(GR00, 0x00);	// test ... check
-	write3CE(GR01, 0x00);	// test ... check
-	write3CE(GR02, 0x00);	// test ... check
-	write3CE(GR03, 0x00);	// test ... check
-	write3CE(GR04, 0x00);	// test ... check
-	write3CE(GR05, 0x40);	// no CGA compat, allow 256 col
-	write3CE(GR06, 0x05);	// graphics mode
-	write3CE(GR07, 0x0F);	// planes?
-	write3CE(GR08, 0xFF);	// test ... check
-	write3CE(GR0F, (bpp == 32) ? 0x1A : 0x12); // vclk / 2 if 32bpp, chain4
-	write3CE(GR20, 0xC0);	// test ... check
-	write3CE(GR2F, 0xA0);	// PCLK = VCLK, no skew,
-
-	//
-	// Setup ARxx regs
-	//
-	for (i = 0; i < 0x10; i++)	// set AR00 .. AR0f
-		write3C0(i, i);
-	write3C0(AR10, 0x41);	// graphics mode and support 256 color modes
-	write3C0(AR12, 0x0F);	// planes
-	write3C0(AR13, 0);	// horizontal pel panning
-	in8(0x3DA);		// reset internal flag to 3c0 index
-	out8(0x3C0, 0x20);	// enable attr
-
-	//
-	// Setup hidden RAMDAC command register
-	//
-	in8(0x3C8);		// these reads are
-	in8(0x3C6);		// necessary to
-	in8(0x3C6);		// unmask the RAMDAC
-	in8(0x3C6);		// command reg, otherwise
-	in8(0x3C6);		// we would write the pixelmask reg!
-	out8(0x3C6, (bpp == 8) ? 0x00 : // 256 colors
-	     (bpp == 15) ? 0x10 :	//
-	     (bpp == 16) ? 0x30 :	// hicolor
-	     (bpp == 24) ? 0xD0 :	// truecolor
-	     (bpp == 32) ? 0xD0 : 0);	// truecolor
-	in8(0x3C8);
-
-	//
-	// GR31 is not mentioned in the datasheet
-	//
-	if (displaytype == DISPLAY_FP)
-		write3CE(GR31, (read3CE(GR31) & 0x8F) |
-			 ((info->var.yres > 1024) ? 0x50 :
-			  (info->var.yres > 768) ? 0x30 :
-			  (info->var.yres > 600) ? 0x20 :
-			  (info->var.yres > 480) ? 0x10 : 0));
-
-	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR
-				      : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length = info->var.xres_virtual * (bpp >> 3);
-	info->cmap.len = (bpp == 8) ? 256 : 16;
-
-	//
-	// init acceleration engine
-	//
-	cyblafb_setup_GE(info->var.xres_virtual, info->var.bits_per_pixel);
-
-	//
-	// Set/clear flags to allow proper scroll mode selection.
-	//
-	if (var->xres == var->xres_virtual)
-		info->flags &= ~FBINFO_HWACCEL_XPAN;
-	else
-		info->flags |= FBINFO_HWACCEL_XPAN;
-
-	if (var->yres == var->yres_virtual)
-		info->flags &= ~FBINFO_HWACCEL_YPAN;
-	else
-		info->flags |= FBINFO_HWACCEL_YPAN;
-
-	if (info->fix.smem_len !=
-	    var->xres_virtual * var->yres_virtual * bpp / 8)
-		info->flags &= ~FBINFO_HWACCEL_YWRAP;
-	else
-		info->flags |= FBINFO_HWACCEL_YWRAP;
-
-	regdump(par);
-
-	return 0;
-}
-
-//========================
-//
-// Set one color register
-//
-//========================
-
-static int cyblafb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			     unsigned blue, unsigned transp,
-			     struct fb_info *info)
-{
-	int bpp = info->var.bits_per_pixel;
-
-	KD_GRAPHICS_RETURN(0);
-
-	if (regno >= info->cmap.len)
-		return 1;
-
-	if (bpp == 8) {
-		out8(0x3C6, 0xFF);
-		out8(0x3C8, regno);
-		out8(0x3C9, red >> 10);
-		out8(0x3C9, green >> 10);
-		out8(0x3C9, blue >> 10);
-
-	} else if (regno < 16) {
-		if (bpp == 16)	// RGB 565
-			((u32 *) info->pseudo_palette)[regno] =
-				(red & 0xF800) |
-				((green & 0xFC00) >> 5) |
-				((blue & 0xF800) >> 11);
-		else if (bpp == 32)	// ARGB 8888
-			((u32 *) info->pseudo_palette)[regno] =
-				((transp & 0xFF00) << 16) |
-				((red & 0xFF00) << 8) |
-				((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
-	}
-
-	return 0;
-}
-
-//==========================================================
-//
-// Try blanking the screen. For flat panels it does nothing
-//
-//==========================================================
-
-static int cyblafb_blank(int blank_mode, struct fb_info *info)
-{
-	unsigned char PMCont, DPMSCont;
-
-	KD_GRAPHICS_RETURN(0);
-
-	if (displaytype == DISPLAY_FP)
-		return 0;
-
-	out8(0x83C8, 0x04);	// DPMS Control
-	PMCont = in8(0x83C6) & 0xFC;
-
-	DPMSCont = read3CE(GR23) & 0xFC;
-
-	switch (blank_mode) {
-	case FB_BLANK_UNBLANK:	// Screen: On, HSync: On, VSync: On
-	case FB_BLANK_NORMAL:	// Screen: Off, HSync: On, VSync: On
-		PMCont |= 0x03;
-		DPMSCont |= 0x00;
-		break;
-	case FB_BLANK_HSYNC_SUSPEND:	// Screen: Off, HSync: Off, VSync: On
-		PMCont |= 0x02;
-		DPMSCont |= 0x01;
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:	// Screen: Off, HSync: On, VSync: Off
-		PMCont |= 0x02;
-		DPMSCont |= 0x02;
-		break;
-	case FB_BLANK_POWERDOWN:	// Screen: Off, HSync: Off, VSync: Off
-		PMCont |= 0x00;
-		DPMSCont |= 0x03;
-		break;
-	}
-
-	write3CE(GR23, DPMSCont);
-	out8(0x83C8, 4);
-	out8(0x83C6, PMCont);
-	//
-	// let fbcon do a softblank for us
-	//
-	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
-}
-
-static struct fb_ops cyblafb_ops __devinitdata = {
-	.owner = THIS_MODULE,
-	.fb_setcolreg = cyblafb_setcolreg,
-	.fb_pan_display = cyblafb_pan_display,
-	.fb_blank = cyblafb_blank,
-	.fb_check_var = cyblafb_check_var,
-	.fb_set_par = cyblafb_set_par,
-	.fb_fillrect = cyblafb_fillrect,
-	.fb_copyarea = cyblafb_copyarea,
-	.fb_imageblit = cyblafb_imageblit,
-	.fb_sync = cyblafb_sync,
-	.fb_restore_state = cyblafb_restore_state,
-	.fb_save_state = cyblafb_save_state,
-};
-
-//==========================================================================
-//
-// getstartupmode() decides about the inital video mode
-//
-// There is no reason to use modedb, a lot of video modes there would
-// need altered timings to display correctly. So I decided that it is much
-// better to provide a limited optimized set of modes plus the option of
-// using the mode in effect at startup time (might be selected using the
-// vga=??? parameter). After that the user might use fbset to select any
-// mode he likes, check_var will not try to alter geometry parameters as
-// it would be necessary otherwise.
-//
-//==========================================================================
-
-static int __devinit getstartupmode(struct fb_info *info)
-{
-	u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend,
-	    vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend,
-	    cr00, cr01, cr02, cr03, cr04, cr05, cr2b,
-	    cr06, cr07, cr09, cr10, cr11, cr12, cr15, cr16, cr27,
-	    cr38, sr0d, sr18, sr19, gr0f, fi, pxclkdiv, vclkdiv, tmp, i;
-
-	struct modus {
-		int xres; int vxres; int yres; int vyres;
-		int bpp; int pxclk;
-		int left_margin; int right_margin;
-		int upper_margin; int lower_margin;
-		int hsync_len; int vsync_len;
-	} modedb[5] = {
-		{
-		0, 2048, 0, 4096, 0, 0, 0, 0, 0, 0, 0, 0}, {
-		640, 2048, 480, 4096, 0, 0, -40, 24, 17, 0, 216, 3}, {
-		800, 2048, 600, 4096, 0, 0, 96, 24, 14, 0, 136, 11}, {
-		1024, 2048, 768, 4096, 0, 0, 144, 24, 29, 0, 120, 3}, {
-		1280, 2048, 1024, 4096, 0, 0, 232, 16, 39, 0, 160, 3}
-	};
-
-	outb(0x00, 0x3d4); cr00 = inb(0x3d5);
-	outb(0x01, 0x3d4); cr01 = inb(0x3d5);
-	outb(0x02, 0x3d4); cr02 = inb(0x3d5);
-	outb(0x03, 0x3d4); cr03 = inb(0x3d5);
-	outb(0x04, 0x3d4); cr04 = inb(0x3d5);
-	outb(0x05, 0x3d4); cr05 = inb(0x3d5);
-	outb(0x06, 0x3d4); cr06 = inb(0x3d5);
-	outb(0x07, 0x3d4); cr07 = inb(0x3d5);
-	outb(0x09, 0x3d4); cr09 = inb(0x3d5);
-	outb(0x10, 0x3d4); cr10 = inb(0x3d5);
-	outb(0x11, 0x3d4); cr11 = inb(0x3d5);
-	outb(0x12, 0x3d4); cr12 = inb(0x3d5);
-	outb(0x15, 0x3d4); cr15 = inb(0x3d5);
-	outb(0x16, 0x3d4); cr16 = inb(0x3d5);
-	outb(0x27, 0x3d4); cr27 = inb(0x3d5);
-	outb(0x2b, 0x3d4); cr2b = inb(0x3d5);
-	outb(0x38, 0x3d4); cr38 = inb(0x3d5);
-
-	outb(0x0b, 0x3c4);
-	inb(0x3c5);
-
-	outb(0x0d, 0x3c4); sr0d = inb(0x3c5);
-	outb(0x18, 0x3c4); sr18 = inb(0x3c5);
-	outb(0x19, 0x3c4); sr19 = inb(0x3c5);
-	outb(0x0f, 0x3ce); gr0f = inb(0x3cf);
-
-	htotal = cr00 | (cr2b & 0x01) << 8;
-	hdispend = cr01 | (cr2b & 0x02) << 7;
-	hblankstart = cr02 | (cr2b & 0x10) << 4;
-	hblankend = (cr03 & 0x1f) | (cr05 & 0x80) >> 2;
-	hsyncstart = cr04 | (cr2b & 0x08) << 5;
-	hsyncend = cr05 & 0x1f;
-
-	modedb[0].xres = hblankstart * 8;
-	modedb[0].hsync_len = hsyncend * 8;
-	modedb[0].right_margin = hsyncstart * 8 - modedb[0].xres;
-	modedb[0].left_margin = (htotal + 5) * 8 - modedb[0].xres -
-	    modedb[0].right_margin - modedb[0].hsync_len;
-
-	vtotal = cr06 | (cr07 & 0x01) << 8 | (cr07 & 0x20) << 4
-	    | (cr27 & 0x80) << 3;
-	vdispend = cr12 | (cr07 & 0x02) << 7 | (cr07 & 0x40) << 3
-	    | (cr27 & 0x10) << 6;
-	vsyncstart = cr10 | (cr07 & 0x04) << 6 | (cr07 & 0x80) << 2
-	    | (cr27 & 0x20) << 5;
-	vsyncend = cr11 & 0x0f;
-	vblankstart = cr15 | (cr07 & 0x08) << 5 | (cr09 & 0x20) << 4
-	    | (cr27 & 0x40) << 4;
-	vblankend = cr16;
-
-	modedb[0].yres = vdispend + 1;
-	modedb[0].vsync_len = vsyncend;
-	modedb[0].lower_margin = vsyncstart - modedb[0].yres;
-	modedb[0].upper_margin = vtotal - modedb[0].yres -
-	    modedb[0].lower_margin - modedb[0].vsync_len + 2;
-
-	tmp = cr38 & 0x3c;
-	modedb[0].bpp = tmp == 0 ? 8 : tmp == 4 ? 16 : tmp == 28 ? 24 :
-	    tmp == 8 ? 32 : 8;
-
-	fi = ((5864727 * (sr18 + 8)) /
-	      (((sr19 & 0x3f) + 2) * (1 << ((sr19 & 0xc0) >> 6)))) >> 12;
-	pxclkdiv = ((gr0f & 0x08) >> 3 | (gr0f & 0x40) >> 5) + 1;
-	tmp = sr0d & 0x06;
-	vclkdiv = tmp == 0 ? 2 : tmp == 2 ? 4 : tmp == 4 ? 8 : 3; // * 2 !
-	modedb[0].pxclk = ((100000000 * pxclkdiv * vclkdiv) >> 1) / fi;
-
-	if (verbosity > 0)
-		output("detected startup mode: "
-		       "fbset -g %d %d %d ??? %d -t %d %d %d %d %d %d %d\n",
-		       modedb[0].xres, modedb[0].yres, modedb[0].xres,
-		       modedb[0].bpp, modedb[0].pxclk, modedb[0].left_margin,
-		       modedb[0].right_margin, modedb[0].upper_margin,
-		       modedb[0].lower_margin, modedb[0].hsync_len,
-		       modedb[0].vsync_len);
-
-	//
-	// We use this goto target in case of a failed check_var. No, I really
-	// do not want to do it in another way!
-	//
-
-      tryagain:
-
-	i = (mode == NULL) ? 0 :
-	    !strncmp(mode, "640x480", 7) ? 1 :
-	    !strncmp(mode, "800x600", 7) ? 2 :
-	    !strncmp(mode, "1024x768", 8) ? 3 :
-	    !strncmp(mode, "1280x1024", 9) ? 4 : 0;
-
-	ref = (ref < 50) ? 50 : (ref > 85) ? 85 : ref;
-
-	if (i == 0) {
-		info->var.pixclock = modedb[i].pxclk;
-		info->var.bits_per_pixel = modedb[i].bpp;
-	} else {
-		info->var.pixclock = (100000000 /
-				      ((modedb[i].left_margin +
-					modedb[i].xres +
-					modedb[i].right_margin +
-					modedb[i].hsync_len) *
-				       (modedb[i].upper_margin +
-					modedb[i].yres +
-					modedb[i].lower_margin +
-					modedb[i].vsync_len) * ref / 10000));
-		info->var.bits_per_pixel = bpp;
-	}
-
-	info->var.left_margin = modedb[i].left_margin;
-	info->var.right_margin = modedb[i].right_margin;
-	info->var.xres = modedb[i].xres;
-	if (!(modedb[i].yres == 1280 && modedb[i].bpp == 32))
-		info->var.xres_virtual = modedb[i].vxres;
-	else
-		info->var.xres_virtual = modedb[i].xres;
-	info->var.xoffset = 0;
-	info->var.hsync_len = modedb[i].hsync_len;
-	info->var.upper_margin = modedb[i].upper_margin;
-	info->var.yres = modedb[i].yres;
-	info->var.yres_virtual = modedb[i].vyres;
-	info->var.yoffset = 0;
-	info->var.lower_margin = modedb[i].lower_margin;
-	info->var.vsync_len = modedb[i].vsync_len;
-	info->var.sync = 0;
-	info->var.vmode = FB_VMODE_NONINTERLACED;
-
-	if (cyblafb_check_var(&info->var, info)) {
-		// 640x480 - 8@75 should really never fail. One case would
-		// be fp == 1 and nativex < 640 ... give up then
-		if (i == 1 && bpp == 8 && ref == 75) {
-			output("Can't find a valid mode :-(\n");
-			return -EINVAL;
-		}
-		// Our detected mode is unlikely to fail. If it does,
-		// try 640x480 - 8@75 ...
-		if (i == 0) {
-			mode = "640x480";
-			bpp = 8;
-			ref = 75;
-			output("Detected mode failed check_var! "
-			       "Trying 640x480 - 8@75\n");
-			goto tryagain;
-		}
-		// A specified video mode failed for some reason.
-		// Try the startup mode first
-		output("Specified mode '%s' failed check! "
-		       "Falling back to startup mode.\n", mode);
-		mode = NULL;
-		goto tryagain;
-	}
-
-	return 0;
-}
-
-//========================================================
-//
-// Detect activated memory size. Undefined values require
-// memsize parameter.
-//
-//========================================================
-
-static unsigned int __devinit get_memsize(void)
-{
-	unsigned char tmp;
-	unsigned int k;
-
-	if (memsize)
-		k = memsize * Kb;
-	else {
-		tmp = read3X4(CR1F) & 0x0F;
-		switch (tmp) {
-		case 0x03:
-			k = 1 * 1024 * 1024;
-			break;
-		case 0x07:
-			k = 2 * 1024 * 1024;
-			break;
-		case 0x0F:
-			k = 4 * 1024 * 1024;
-			break;
-		case 0x04:
-			k = 8 * 1024 * 1024;
-			break;
-		default:
-			k = 1 * 1024 * 1024;
-			output("Unknown memory size code %x in CR1F."
-			       " We default to 1 Mb for now, please"
-			       " do provide a memsize parameter!\n", tmp);
-		}
-	}
-
-	if (verbosity > 0)
-		output("framebuffer size = %d Kb\n", k / Kb);
-	return k;
-}
-
-//=========================================================
-//
-// Detect if a flat panel monitor connected to the special
-// interface is active. Override is possible by fp and crt
-// parameters.
-//
-//=========================================================
-
-static unsigned int __devinit get_displaytype(void)
-{
-	if (fp)
-		return DISPLAY_FP;
-	if (crt)
-		return DISPLAY_CRT;
-	return (read3CE(GR33) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
-}
-
-//=====================================
-//
-// Get native resolution of flat panel
-//
-//=====================================
-
-static int __devinit get_nativex(void)
-{
-	int x, y, tmp;
-
-	if (nativex)
-		return nativex;
-
-	tmp = (read3CE(GR52) >> 4) & 3;
-
-	switch (tmp) {
-	case 0: x = 1280; y = 1024;
-		break;
-	case 2: x = 1024; y = 768;
-		break;
-	case 3: x = 800;  y = 600;
-		break;
-	case 4: x = 1400; y = 1050;
-		break;
-	case 1:
-	default:
-		x = 640; y = 480;
-		break;
-	}
-
-	if (verbosity > 0)
-		output("%dx%d flat panel found\n", x, y);
-	return x;
-}
-
-static int __devinit cybla_pci_probe(struct pci_dev *dev,
-				     const struct pci_device_id *id)
-{
-	struct fb_info *info;
-	struct cyblafb_par *par;
-
-	info = framebuffer_alloc(sizeof(struct cyblafb_par), &dev->dev);
-	if (!info)
-		goto errout_alloc_info;
-
-	info->pixmap.addr = kzalloc(CYBLAFB_PIXMAPSIZE, GFP_KERNEL);
-	if (!info->pixmap.addr) {
-		output("allocation of pixmap buffer failed!\n");
-		goto errout_alloc_pixmap;
-	}
-	info->pixmap.size = CYBLAFB_PIXMAPSIZE - 4;
-	info->pixmap.buf_align = 4;
-	info->pixmap.access_align = 32;
-	info->pixmap.flags = FB_PIXMAP_SYSTEM;
-	info->pixmap.scan_align = 4;
-
-	par = info->par;
-	par->ops = cyblafb_ops;
-
-	info->fix = cyblafb_fix;
-	info->fbops = &par->ops;
-	info->fix = cyblafb_fix;
-
-	if (pci_enable_device(dev)) {
-		output("could not enable device!\n");
-		goto errout_enable;
-	}
-	// might already be requested by vga console or vesafb,
-	// so we do care about success
-	if (!request_region(0x3c0, 0x20, "cyblafb")) {
-		output("region 0x3c0/0x20 already reserved\n");
-		vesafb |= 1;
-
-	}
-	//
-	// Graphics Engine Registers
-	//
-	if (!request_region(GEBase, 0x100, "cyblafb")) {
-		output("region %#x/0x100 already reserved\n", GEBase);
-		vesafb |= 2;
-	}
-
-	regdump(par);
-
-	enable_mmio();
-
-	// setup MMIO region
-	info->fix.mmio_start = pci_resource_start(dev, 1);
-	info->fix.mmio_len = 0x20000;
-
-	if (!request_mem_region(info->fix.mmio_start,
-				info->fix.mmio_len, "cyblafb")) {
-		output("request_mem_region failed for mmio region!\n");
-		goto errout_mmio_reqmem;
-	}
-
-	io_virt = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
-
-	if (!io_virt) {
-		output("ioremap failed for mmio region\n");
-		goto errout_mmio_remap;
-	}
-	// setup framebuffer memory ... might already be requested
-	// by vesafb. Not to fail in case of an unsuccessful request
-	// is useful if both are loaded.
-	info->fix.smem_start = pci_resource_start(dev, 0);
-	info->fix.smem_len = get_memsize();
-
-	if (!request_mem_region(info->fix.smem_start,
-				info->fix.smem_len, "cyblafb")) {
-		output("region %#lx/%#x already reserved\n",
-		       info->fix.smem_start, info->fix.smem_len);
-		vesafb |= 4;
-	}
-
-	info->screen_base = ioremap_nocache(info->fix.smem_start,
-					    info->fix.smem_len);
-
-	if (!info->screen_base) {
-		output("ioremap failed for smem region\n");
-		goto errout_smem_remap;
-	}
-
-	displaytype = get_displaytype();
-
-	if (displaytype == DISPLAY_FP)
-		nativex = get_nativex();
-
-	info->flags = FBINFO_DEFAULT
-		    | FBINFO_HWACCEL_COPYAREA
-		    | FBINFO_HWACCEL_FILLRECT
-		    | FBINFO_HWACCEL_IMAGEBLIT
-		    | FBINFO_READS_FAST
-//		    | FBINFO_PARTIAL_PAN_OK
-		    | FBINFO_MISC_ALWAYS_SETPAR;
-
-	info->pseudo_palette = par->pseudo_pal;
-
-	if (getstartupmode(info))
-		goto errout_findmode;
-
-	fb_alloc_cmap(&info->cmap, 256, 0);
-
-	if (register_framebuffer(info)) {
-		output("Could not register CyBla framebuffer\n");
-		goto errout_register;
-	}
-
-	pci_set_drvdata(dev, info);
-
-	//
-	// normal exit and error paths
-	//
-
-	return 0;
-
-      errout_register:
-      errout_findmode:
-	iounmap(info->screen_base);
-      errout_smem_remap:
-	if (!(vesafb & 4))
-		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-	iounmap(io_virt);
-      errout_mmio_remap:
-	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-      errout_mmio_reqmem:
-	if (!(vesafb & 1))
-		release_region(0x3c0, 32);
-      errout_enable:
-	kfree(info->pixmap.addr);
-      errout_alloc_pixmap:
-	framebuffer_release(info);
-      errout_alloc_info:
-	output("CyblaFB version %s aborting init.\n", VERSION);
-	return -ENODEV;
-}
-
-static void __devexit cybla_pci_remove(struct pci_dev *dev)
-{
-	struct fb_info *info = pci_get_drvdata(dev);
-
-	unregister_framebuffer(info);
-	iounmap(io_virt);
-	iounmap(info->screen_base);
-	if (!(vesafb & 4))
-		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-	fb_dealloc_cmap(&info->cmap);
-	if (!(vesafb & 2))
-		release_region(GEBase, 0x100);
-	if (!(vesafb & 1))
-		release_region(0x3c0, 32);
-	kfree(info->pixmap.addr);
-	framebuffer_release(info);
-	output("CyblaFB version %s normal exit.\n", VERSION);
-}
-
-//
-// List of boards that we are trying to support
-//
-static struct pci_device_id cybla_devices[] = {
-	{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0,}
-};
-
-MODULE_DEVICE_TABLE(pci, cybla_devices);
-
-static struct pci_driver cyblafb_pci_driver = {
-	.name = "cyblafb",
-	.id_table = cybla_devices,
-	.probe = cybla_pci_probe,
-	.remove = __devexit_p(cybla_pci_remove)
-};
-
-//=============================================================
-//
-// kernel command line example:
-//
-//	video=cyblafb:1280x1024, bpp=16, ref=50 ...
-//
-// modprobe command line example:
-//
-//	modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
-//
-//=============================================================
-
-static int __devinit cyblafb_init(void)
-{
-#ifndef MODULE
-	char *options = NULL;
-	char *opt;
-
-	if (fb_get_options("cyblafb", &options))
-		return -ENODEV;
-
-	if (options && *options)
-		while ((opt = strsep(&options, ",")) != NULL) {
-			if (!*opt)
-				continue;
-			else if (!strncmp(opt, "bpp=", 4))
-				bpp = simple_strtoul(opt + 4, NULL, 0);
-			else if (!strncmp(opt, "ref=", 4))
-				ref = simple_strtoul(opt + 4, NULL, 0);
-			else if (!strncmp(opt, "fp", 2))
-				displaytype = DISPLAY_FP;
-			else if (!strncmp(opt, "crt", 3))
-				displaytype = DISPLAY_CRT;
-			else if (!strncmp(opt, "nativex=", 8))
-				nativex = simple_strtoul(opt + 8, NULL, 0);
-			else if (!strncmp(opt, "center", 6))
-				center = 1;
-			else if (!strncmp(opt, "stretch", 7))
-				stretch = 1;
-			else if (!strncmp(opt, "pciwb=", 6))
-				pciwb = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "pcirb=", 6))
-				pcirb = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "pciwr=", 6))
-				pciwr = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "pcirr=", 6))
-				pcirr = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "memsize=", 8))
-				memsize = simple_strtoul(opt + 8, NULL, 0);
-			else if (!strncmp(opt, "verbosity=", 10))
-				verbosity = simple_strtoul(opt + 10, NULL, 0);
-			else
-				mode = opt;
-		}
-#endif
-	output("CyblaFB version %s initializing\n", VERSION);
-	return pci_register_driver(&cyblafb_pci_driver);
-}
-
-static void __exit cyblafb_exit(void)
-{
-	pci_unregister_driver(&cyblafb_pci_driver);
-}
-
-module_init(cyblafb_init);
-module_exit(cyblafb_exit);
-
-MODULE_AUTHOR("Knut Petersen <knut_petersen@t-online.de>");
-MODULE_DESCRIPTION("Framebuffer driver for Cyberblade/i1 graphics core");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index c5369ba..bc692a1 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -2,7 +2,7 @@
  * Frame buffer driver for Trident TGUI, Blade and Image series
  *
  * Copyright 2001, 2002 - Jani Monoses   <jani@iv.ro>
- *
+ * Copyright 2009 Krzysztof Helt <krzysztof.h1@wp.pl>
  *
  * CREDITS:(in order of appearance)
  *	skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
@@ -1490,6 +1490,9 @@
 	} else
 		info->flags |= FBINFO_HWACCEL_DISABLED;
 
+	if (is_blade(chip_id) && chip_id != BLADE3D)
+		info->flags |= FBINFO_READS_FAST;
+
 	info->pixmap.addr = kmalloc(4096, GFP_KERNEL);
 	if (!info->pixmap.addr) {
 		err = -ENOMEM;
@@ -1664,4 +1667,5 @@
 MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
 MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("cyblafb");