Merge branch 'next-samsung-devel' into next-samsung-devel-2
Conflicts:
arch/arm/mach-exynos4/clock.c
arch/arm/mach-s3c2412/gpio.c
arch/arm/mach-s5p64x0/dma.c
arch/arm/mach-s5p64x0/gpiolib.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3146ed3..bea81d0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -724,9 +724,6 @@
select SAMSUNG_IRQ_VIC_TIMER
select SAMSUNG_IRQ_UART
select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index e4a04e4..33c78d7 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -21,6 +21,9 @@
* OneNAND features.
*/
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
#define PL080_INT_STATUS (0x00)
#define PL080_TC_STATUS (0x04)
#define PL080_TC_CLEAR (0x08)
@@ -138,3 +141,4 @@
u32 control1;
};
+#endif /* ASM_PL080_H */
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index c595bb0..b6722dec 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -11,7 +11,7 @@
config CPU_EXYNOS4210
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
@@ -131,6 +131,14 @@
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_MFC
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
@@ -145,6 +153,7 @@
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung SMDKV310
@@ -170,19 +179,26 @@
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_MFC
select S5P_DEV_ONENAND
+ select S5P_DEV_TV
select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_FIMC
+ select S5P_SETUP_MIPIPHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -191,6 +207,8 @@
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select S3C_DEV_WDT
+ select S3C_DEV_RTC
+ select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
@@ -200,6 +218,7 @@
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
@@ -215,8 +234,22 @@
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
+ select EXYNOS4_DEV_PD
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for ORIGEN based on Samsung EXYNOS4210
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 413c7cc..a25c818 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -111,6 +111,11 @@
.name = "sclk_usbphy1",
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -146,6 +151,11 @@
return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
}
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -186,6 +196,16 @@
return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
}
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk clk_mout_apll = {
@@ -503,13 +523,48 @@
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.0",
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hdmiphy",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "sata",
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.1",
+ .name = "dma",
+ .devname = "dma-pl330.1",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 1),
}, {
@@ -630,6 +685,12 @@
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 13),
}, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
.name = "SYSMMU_MDMA",
.enable = exynos4_clk_ip_image_ctrl,
.ctrlbit = (1 << 5),
@@ -831,6 +892,81 @@
.nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
};
+static struct clk *clkset_sclk_dac_list[] = {
+ [0] = &clk_sclk_vpll.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+ .sources = clkset_sclk_dac_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+ .clk = {
+ .name = "sclk_dac",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_sclk_dac,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+ [0] = &clk_sclk_pixel.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+ .sources = clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_sclk_hdmi,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+ [0] = &clk_sclk_dac.clk,
+ [1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+ .sources = clkset_sclk_mixer_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
+ &clk_sclk_mixer,
+};
+
static struct clksrc_clk clk_dout_mmc0 = {
.clk = {
.name = "dout_mmc0",
@@ -1157,6 +1293,71 @@
.get_rate = exynos4_fout_apll_get_rate,
};
+static u32 vpll_div[][8] = {
+ { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
+ { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con0, vpll_con1 = 0;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+ vpll_con0 &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+ vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
+ PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
+ PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+ if (vpll_div[i][0] == rate) {
+ vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+ vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+ vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+ vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+ vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+ vpll_con0 |= vpll_div[i][7] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con0, S5P_VPLL_CON0);
+ __raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+ .get_rate = exynos4_vpll_get_rate,
+ .set_rate = exynos4_vpll_set_rate,
+};
+
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -1214,6 +1415,7 @@
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &exynos4_vpll_ops;
clk_fout_vpll.rate = vpll;
printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1241,7 +1443,10 @@
}
static struct clk *clks[] __initdata = {
- /* Nothing here yet */
+ &clk_sclk_hdmi27m,
+ &clk_sclk_hdmiphy,
+ &clk_sclk_usbphy0,
+ &clk_sclk_usbphy1,
};
#ifdef CONFIG_PM_SLEEP
@@ -1275,6 +1480,9 @@
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+ s3c_register_clksrc(sclk_tv[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
@@ -1282,5 +1490,7 @@
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
register_syscore_ops(&exynos4_clock_syscore_ops);
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 02ec52a..2aa3df0 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -28,6 +28,7 @@
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/reset.h>
+#include <plat/tv-core.h>
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
@@ -180,6 +181,7 @@
s3c_i2c2_setname("s3c2440-i2c");
s5p_fb_setname(0, "exynos4-fb");
+ s5p_hdmi_setname("exynos4-hdmi");
}
void __init exynos4_init_clocks(int xtal)
diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
index 564bb53..9667c61 100644
--- a/arch/arm/mach-exynos4/dma.c
+++ b/arch/arm/mach-exynos4/dma.c
@@ -21,151 +21,229 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource exynos4_pdma0_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+ {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
- .peri = {
- [0] = DMACH_PCM0_RX,
- [1] = DMACH_PCM0_TX,
- [2] = DMACH_PCM2_RX,
- [3] = DMACH_PCM2_TX,
- [4] = DMACH_MSM_REQ0,
- [5] = DMACH_MSM_REQ2,
- [6] = DMACH_SPI0_RX,
- [7] = DMACH_SPI0_TX,
- [8] = DMACH_SPI2_RX,
- [9] = DMACH_SPI2_TX,
- [10] = DMACH_I2S0S_TX,
- [11] = DMACH_I2S0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S2_RX,
- [14] = DMACH_I2S2_TX,
- [15] = DMACH_UART0_RX,
- [16] = DMACH_UART0_TX,
- [17] = DMACH_UART2_RX,
- [18] = DMACH_UART2_TX,
- [19] = DMACH_UART4_RX,
- [20] = DMACH_UART4_TX,
- [21] = DMACH_SLIMBUS0_RX,
- [22] = DMACH_SLIMBUS0_TX,
- [23] = DMACH_SLIMBUS2_RX,
- [24] = DMACH_SLIMBUS2_TX,
- [25] = DMACH_SLIMBUS4_RX,
- [26] = DMACH_SLIMBUS4_TX,
- [27] = DMACH_AC97_MICIN,
- [28] = DMACH_AC97_PCMIN,
- [29] = DMACH_AC97_PCMOUT,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
};
-static struct platform_device exynos4_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(exynos4_pdma0_resource),
- .resource = exynos4_pdma0_resource,
- .dev = {
+struct amba_device exynos4_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma0_pdata,
},
+ .res = {
+ .start = EXYNOS4_PA_PDMA0,
+ .end = EXYNOS4_PA_PDMA0 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
};
-static struct resource exynos4_pdma1_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma1_peri[25] = {
+ {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS5_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS5_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
- .peri = {
- [0] = DMACH_PCM0_RX,
- [1] = DMACH_PCM0_TX,
- [2] = DMACH_PCM1_RX,
- [3] = DMACH_PCM1_TX,
- [4] = DMACH_MSM_REQ1,
- [5] = DMACH_MSM_REQ3,
- [6] = DMACH_SPI1_RX,
- [7] = DMACH_SPI1_TX,
- [8] = DMACH_I2S0S_TX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S1_RX,
- [12] = DMACH_I2S1_TX,
- [13] = DMACH_UART0_RX,
- [14] = DMACH_UART0_TX,
- [15] = DMACH_UART1_RX,
- [16] = DMACH_UART1_TX,
- [17] = DMACH_UART3_RX,
- [18] = DMACH_UART3_TX,
- [19] = DMACH_SLIMBUS1_RX,
- [20] = DMACH_SLIMBUS1_TX,
- [21] = DMACH_SLIMBUS3_RX,
- [22] = DMACH_SLIMBUS3_TX,
- [23] = DMACH_SLIMBUS5_RX,
- [24] = DMACH_SLIMBUS5_TX,
- [25] = DMACH_SLIMBUS0AUX_RX,
- [26] = DMACH_SLIMBUS0AUX_TX,
- [27] = DMACH_SPDIF,
- [28] = DMACH_MAX,
- [29] = DMACH_MAX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
};
-static struct platform_device exynos4_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(exynos4_pdma1_resource),
- .resource = exynos4_pdma1_resource,
- .dev = {
+struct amba_device exynos4_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma1_pdata,
},
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
- &exynos4_device_pdma0,
- &exynos4_device_pdma1,
+ .res = {
+ .start = EXYNOS4_PA_PDMA1,
+ .end = EXYNOS4_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init exynos4_dma_init(void)
{
- platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
+ amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_device_pdma1, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-exynos4/include/mach/dma.h
+++ b/arch/arm/mach-exynos4/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
new file mode 100644
index 0000000..9dbe317
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM (8)
+
+#endif
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8..62093b9 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -93,7 +93,11 @@
#define IRQ_2D IRQ_SPI(89)
#define IRQ_PCIE IRQ_SPI(90)
+#define IRQ_MIXER IRQ_SPI(91)
+#define IRQ_HDMI IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY IRQ_SPI(93)
#define IRQ_MFC IRQ_SPI(94)
+#define IRQ_SDO IRQ_SPI(95)
#define IRQ_AUDIO_SS IRQ_SPI(96)
#define IRQ_I2S0 IRQ_SPI(97)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 7073ac7..1bea7d1 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -113,6 +113,12 @@
#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS4_PA_VP 0x12C00000
+#define EXYNOS4_PA_MIXER 0x12C10000
+#define EXYNOS4_PA_SDO 0x12C20000
+#define EXYNOS4_PA_HDMI 0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
+
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
#define EXYNOS4_PA_ADC 0x13910000
@@ -162,6 +168,12 @@
#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
+#define S5P_PA_SDO EXYNOS4_PA_SDO
+#define S5P_PA_VP EXYNOS4_PA_VP
+#define S5P_PA_MIXER EXYNOS4_PA_MIXER
+#define S5P_PA_HDMI EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY
+
#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
/* UART */
diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h
index 1df3b81..9d8da51e3 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos4/include/mach/pm-core.h
@@ -14,6 +14,10 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
#include <mach/regs-pmu.h>
static inline void s3c_pm_debug_init_uart(void)
@@ -53,7 +57,9 @@
/* nothing here yet */
}
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
{
/* nothing here yet */
}
+
+#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h
index a952904..632dd56 100644
--- a/arch/arm/mach-exynos4/include/mach/pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/pmu.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_PMU_H
#define __ASM_ARCH_PMU_H __FILE__
+#define PMU_TABLE_END NULL
+
enum sys_powerdown {
SYS_AFTR,
SYS_LPA,
@@ -20,6 +22,11 @@
NUM_SYS_POWERDOWN,
};
+struct exynos4_pmu_conf {
+ void __iomem *reg;
+ unsigned int val[NUM_SYS_POWERDOWN];
+};
+
extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
index cdf9b47..4fff8e9 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
@@ -25,9 +25,10 @@
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFI1 (1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM (1 << 18)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
#define S5P_USE_STANDBY_WFE1 (1 << 25)
-#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24))
+#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
#define S5P_SWRESET S5P_PMUREG(0x0400)
@@ -35,15 +36,17 @@
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
-#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE (1 << 0)
+#define S5P_HDMI_PHY_CONTROL S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE (1 << 0)
+
+#define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4)
#define S5P_MIPI_DPHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_SRESETN (1 << 1)
#define S5P_MIPI_DPHY_MRESETN (1 << 2)
-#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
#define S5P_INFORM0 S5P_PMUREG(0x0800)
#define S5P_INFORM1 S5P_PMUREG(0x0804)
#define S5P_INFORM2 S5P_PMUREG(0x0808)
@@ -76,7 +79,6 @@
#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
@@ -84,7 +86,6 @@
#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
@@ -92,14 +93,11 @@
#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
@@ -120,7 +118,6 @@
#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
@@ -156,7 +153,6 @@
#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40)
#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60)
#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
@@ -165,4 +161,60 @@
#define S5P_CHECK_SLEEP 0x00000BAD
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE (1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
+
#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b..bbd13f4 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -32,10 +32,12 @@
#include <asm/mach-types.h>
#include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/ehci.h>
#include <plat/clock.h>
@@ -199,6 +201,33 @@
},
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+ .win_mode = {
+ .left_margin = 64,
+ .right_margin = 16,
+ .upper_margin = 64,
+ .lower_margin = 1,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .xres = 1280,
+ .yres = 800,
+ .refresh = 60,
+ },
+ .max_bpp = 24,
+ .default_bpp = 16,
+ .virtual_x = 1280,
+ .virtual_y = 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+ .win[0] = &nuri_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
{
int gpio = EXYNOS4_GPE1(5);
@@ -1092,6 +1121,7 @@
/* Samsung Platform Devices */
&s3c_device_i2c5, /* PMIC should initialize first */
&emmc_fixed_voltage,
+ &s5p_device_fimd0,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
@@ -1106,6 +1136,7 @@
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
/* NURI Devices */
&nuri_gpio_keys,
@@ -1142,12 +1173,15 @@
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+ s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
}
MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index ed59f86..18909cf 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -14,16 +14,31 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
+
#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
#include <mach/map.h>
@@ -72,19 +87,543 @@
},
};
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+ REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+ REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+ REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+ REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+ REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+ REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+ REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+ REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+ REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+ .constraints = {
+ .name = "VDD_ABB_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data = {
+ .constraints = {
+ .name = "VDD_ALIVE_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+ .constraints = {
+ .name = "VMIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
+ .consumer_supplies = ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+ .constraints = {
+ .name = "VDD_RTC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
+ .consumer_supplies = ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+ .constraints = {
+ .name = "VDD_AUD_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
+ .consumer_supplies = ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+ .constraints = {
+ .name = "VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
+ .consumer_supplies = ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+ .constraints = {
+ .name = "DVDD_SWB_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
+ .consumer_supplies = ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+ .constraints = {
+ .name = "VDD_PLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+ .constraints = {
+ .name = "VDD_AUD_3V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
+ .consumer_supplies = ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+ .constraints = {
+ .name = "AVDD18_SWB_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
+ .consumer_supplies = ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+ .constraints = {
+ .name = "VDD_SWB_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
+ .consumer_supplies = ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+ .constraints = {
+ .name = "VDD_MIF_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_1.2V",
+ .min_uV = 950000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
+ .consumer_supplies = buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_1.1V",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
+ .consumer_supplies = buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_1.1V",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
+ .consumer_supplies = buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+ .constraints = {
+ .name = "VDDQ_M1M2_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+ .constraints = {
+ .name = "VDD_LCD_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .boot_on = 1,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
+ .consumer_supplies = buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+ { MAX8997_LDO1, &max8997_ldo1_data },
+ { MAX8997_LDO2, &max8997_ldo2_data },
+ { MAX8997_LDO3, &max8997_ldo3_data },
+ { MAX8997_LDO4, &max8997_ldo4_data },
+ { MAX8997_LDO6, &max8997_ldo6_data },
+ { MAX8997_LDO7, &max8997_ldo7_data },
+ { MAX8997_LDO8, &max8997_ldo8_data },
+ { MAX8997_LDO9, &max8997_ldo9_data },
+ { MAX8997_LDO10, &max8997_ldo10_data },
+ { MAX8997_LDO11, &max8997_ldo11_data },
+ { MAX8997_LDO14, &max8997_ldo14_data },
+ { MAX8997_LDO17, &max8997_ldo17_data },
+ { MAX8997_LDO21, &max8997_ldo21_data },
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+ { MAX8997_BUCK5, &max8997_buck5_data },
+ { MAX8997_BUCK7, &max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+ .regulators = origen_max8997_regulators,
+
+ .wakeup = true,
+ .buck1_gpiodvs = false,
+ .buck2_gpiodvs = false,
+ .buck5_gpiodvs = false,
+ .irq_base = IRQ_GPIO_END + 1,
+
+ .ignore_gpiodvs_side_effect = true,
+ .buck125_default_idx = 0x0,
+
+ .buck125_gpios[0] = EXYNOS4_GPX0(0),
+ .buck125_gpios[1] = EXYNOS4_GPX0(1),
+ .buck125_gpios[2] = EXYNOS4_GPX0(2),
+
+ .buck1_voltage[0] = 1350000,
+ .buck1_voltage[1] = 1300000,
+ .buck1_voltage[2] = 1250000,
+ .buck1_voltage[3] = 1200000,
+ .buck1_voltage[4] = 1150000,
+ .buck1_voltage[5] = 1100000,
+ .buck1_voltage[6] = 1000000,
+ .buck1_voltage[7] = 950000,
+
+ .buck2_voltage[0] = 1100000,
+ .buck2_voltage[1] = 1100000,
+ .buck2_voltage[2] = 1100000,
+ .buck2_voltage[3] = 1100000,
+ .buck2_voltage[4] = 1000000,
+ .buck2_voltage[5] = 1000000,
+ .buck2_voltage[6] = 1000000,
+ .buck2_voltage[7] = 1000000,
+
+ .buck5_voltage[0] = 1200000,
+ .buck5_voltage[1] = 1200000,
+ .buck5_voltage[2] = 1200000,
+ .buck5_voltage[3] = 1200000,
+ .buck5_voltage[4] = 1200000,
+ .buck5_voltage[5] = 1200000,
+ .buck5_voltage[6] = 1200000,
+ .buck5_voltage[7] = 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+ .platform_data = &origen_max8997_pdata,
+ .irq = IRQ_EINT(4),
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+ {
+ .code = KEY_MENU,
+ .gpio = EXYNOS4_GPX1(5),
+ .desc = "gpio-keys: KEY_MENU",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_HOME,
+ .gpio = EXYNOS4_GPX1(6),
+ .desc = "gpio-keys: KEY_HOME",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_BACK,
+ .gpio = EXYNOS4_GPX1(7),
+ .desc = "gpio-keys: KEY_BACK",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_UP,
+ .gpio = EXYNOS4_GPX2(0),
+ .desc = "gpio-keys: KEY_UP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_DOWN,
+ .gpio = EXYNOS4_GPX2(1),
+ .desc = "gpio-keys: KEY_DOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+ .buttons = origen_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &origen_gpio_keys_data,
+ },
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+ int ret;
+
+ if (power)
+ ret = gpio_request_one(EXYNOS4_GPE3(4),
+ GPIOF_OUT_INIT_HIGH, "GPE3_4");
+ else
+ ret = gpio_request_one(EXYNOS4_GPE3(4),
+ GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+ gpio_free(EXYNOS4_GPE3(4));
+
+ if (ret)
+ pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+ .set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+ .win_mode = {
+ .left_margin = 64,
+ .right_margin = 16,
+ .upper_margin = 64,
+ .lower_margin = 16,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .xres = 1024,
+ .yres = 600,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+ .win[0] = &origen_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc2,
+ &s3c_device_hsmmc0,
+ &s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_wdt,
+ &s5p_device_ehci,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &s5p_device_fimd0,
+ &s5p_device_hdmi,
+ &s5p_device_i2c_hdmiphy,
+ &s5p_device_mixer,
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_TV],
+ &origen_device_gpiokeys,
+ &origen_lcd_hv070wsa,
};
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(0),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+ .pwm_id = 0,
+ .pwm_period_ns = 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+ /* Direct HPD to HDMI chip */
+ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
static void __init origen_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -92,10 +631,42 @@
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
+static void __init origen_power_init(void)
+{
+ gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+ s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
static void __init origen_machine_init(void)
{
+ origen_power_init();
+
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+ /*
+ * Since sdhci instance 2 can contain a bootable media,
+ * sdhci instance 0 is registered after instance 2.
+ */
s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+ origen_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
+ s5p_tv_setup();
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+
+ s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+ samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
}
MACHINE_START(ORIGEN, "ORIGEN")
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index a16eb56..35a763e 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -37,6 +37,9 @@
#include <plat/pd.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
#include <mach/map.h>
@@ -232,17 +235,36 @@
{I2C_BOARD_INFO("wm8994", 0x1a),},
};
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c1,
+ &s5p_device_i2c_hdmiphy,
&s3c_device_rtc,
&s3c_device_wdt,
+ &s5p_device_ehci,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
&exynos4_device_ac97,
&exynos4_device_i2s0,
&samsung_device_keypad,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
&exynos4_device_pd[PD_G3D],
&exynos4_device_pd[PD_LCD0],
@@ -258,6 +280,8 @@
&smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
+ &s5p_device_hdmi,
+ &s5p_device_mixer,
};
static void __init smdkv310_smsc911x_init(void)
@@ -294,6 +318,18 @@
.pwm_period_ns = 1000,
};
+static void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -301,6 +337,11 @@
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
+static void __init smdkv310_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init smdkv310_machine_init(void)
{
s3c_i2c1_set_platdata(NULL);
@@ -313,12 +354,19 @@
s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+ s5p_tv_setup();
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+ smdkv310_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(SMDKV310, "SMDKV310")
@@ -329,6 +377,7 @@
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
+ .reserve = &smdkv310_reserve,
MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d89..18cf5c7 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -31,12 +32,21 @@
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
+#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
#include <mach/map.h>
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -110,6 +120,9 @@
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
.name = "VINT_1.1V",
@@ -153,6 +166,8 @@
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
@@ -181,6 +196,12 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
static struct regulator_init_data lp3974_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
@@ -192,6 +213,12 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+ .consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
};
static struct regulator_init_data lp3974_ldo4_data = {
@@ -205,6 +232,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+ .consumer_supplies = lp3974_ldo4_consumer,
};
static struct regulator_init_data lp3974_ldo5_data = {
@@ -233,6 +262,10 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
static struct regulator_init_data lp3974_ldo7_data = {
.constraints = {
.name = "VLCD+VMIPI_1.8V",
@@ -244,6 +277,12 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
+ .consumer_supplies = lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_init_data lp3974_ldo8_data = {
@@ -257,6 +296,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+ .consumer_supplies = lp3974_ldo8_consumer,
};
static struct regulator_init_data lp3974_ldo9_data = {
@@ -286,6 +327,9 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+ REGULATOR_SUPPLY("dig_28", "0-001f");
+
static struct regulator_init_data lp3974_ldo11_data = {
.constraints = {
.name = "CAM_AF_3.3V",
@@ -297,6 +341,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo11_consumer,
};
static struct regulator_init_data lp3974_ldo12_data = {
@@ -325,6 +371,9 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+ REGULATOR_SUPPLY("dig_18", "0-001f");
+
static struct regulator_init_data lp3974_ldo14_data = {
.constraints = {
.name = "CAM_I_HOST_1.8V",
@@ -336,8 +385,14 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo14_consumer,
};
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+ REGULATOR_SUPPLY("dig_12", "0-001f");
+
static struct regulator_init_data lp3974_ldo15_data = {
.constraints = {
.name = "CAM_S_DIG+FM33_CORE_1.2V",
@@ -349,6 +404,12 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+ REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
static struct regulator_init_data lp3974_ldo16_data = {
@@ -362,6 +423,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
+ .consumer_supplies = lp3974_ldo16_consumer,
};
static struct regulator_init_data lp3974_ldo17_data = {
@@ -472,6 +535,43 @@
.wakeup = true,
};
+
+enum fixed_regulator_id {
+ FIXED_REG_ID_MMC0,
+ FIXED_REG_ID_HDMI_5V,
+ FIXED_REG_ID_CAM_S_IF,
+ FIXED_REG_ID_CAM_I_CORE,
+ FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+ REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "HDMI_5V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+ .supply_name = "HDMI_EN1",
+ .microvolts = 5000000,
+ .gpio = EXYNOS4_GPE0(1),
+ .enable_high = true,
+ .init_data = &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_HDMI_5V,
+ .dev = {
+ .platform_data = &hdmi_fixed_voltage_config,
+ },
+};
+
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
@@ -573,6 +673,11 @@
gpio_direction_output(gpio, 1);
}
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+ .frequency = 300 * 1000,
+ .sda_delay = 200,
+};
+
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
@@ -658,7 +763,7 @@
static struct platform_device mmc0_fixed_voltage = {
.name = "reg-fixed-voltage",
- .id = 0,
+ .id = FIXED_REG_ID_MMC0,
.dev = {
.platform_data = &mmc0_fixed_voltage_config,
},
@@ -692,18 +797,170 @@
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
- /* Camera, To be updated */
-};
-
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+ .win_mode = {
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 800,
+ .refresh = 55,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+ .win[0] = &universal_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+ | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+ REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+ .supply_name = "CAM_I_CORE_1.2V",
+ .microvolts = 1200000,
+ .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
+ .enable_high = 1,
+ .init_data = &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+ .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+ REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+ .supply_name = "CAM_S_IF_1.8V",
+ .microvolts = 1800000,
+ .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
+ .enable_high = 1,
+ .init_data = &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+ .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+ .clk_rate = 166000000UL,
+ .lanes = 2,
+ .alignment = 32,
+ .hs_settle = 12,
+ .phy_enable = s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+ gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+ return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+ .gpio_reset = GPIO_CAM_MEGA_nRST,
+ .reset_polarity = 0,
+ .set_power = m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+ I2C_BOARD_INFO("M5MOLS", 0x1F),
+ .platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_MIPI_CSI2,
+ .board_info = &m5mols_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 21600000UL,
+ .csi_data_align = 32,
+ },
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+ .isp_info = universal_camera_sensors,
+ .num_clients = ARRAY_SIZE(universal_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+ .name = "s5p-fimc-md",
+ .id = -1,
+};
+
+static struct gpio universal_camera_gpios[] = {
+ { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+ { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
+ { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
+ { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+ s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+ &s5p_device_mipi_csis0);
+ s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ if (gpio_request_array(universal_camera_gpios,
+ ARRAY_SIZE(universal_camera_gpios))) {
+ pr_err("%s: GPIO request failed\n", __func__);
+ return;
+ }
+
+ if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+ m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+ else
+ pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+ /* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_MEGA_nRST);
+ gpio_free(GPIO_CAM_8M_ISP_INT);
+
+ if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+ pr_err("Camera port A setup failed\n");
+}
+
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
@@ -712,17 +969,30 @@
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
+ &s3c_device_i2c0,
&s3c_device_i2c3,
&s3c_device_i2c5,
+ &s5p_device_i2c_hdmiphy,
+ &hdmi_fixed_voltage,
+ &exynos4_device_pd[PD_TV],
+ &s5p_device_hdmi,
+ &s5p_device_sdo,
+ &s5p_device_mixer,
/* Universal Devices */
&i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
+ &s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_CAM],
+ &cam_i_core_fixed_reg_dev,
+ &cam_s_if_fixed_reg_dev,
+ &s5p_device_fimc_md,
};
static void __init universal_map_io(void)
@@ -732,6 +1002,20 @@
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
+void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+ gpio_direction_input(EXYNOS4_GPX3(7));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
static void __init universal_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -740,8 +1024,9 @@
static void __init universal_machine_init(void)
{
universal_sdhci_init();
+ s5p_tv_setup();
- i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+ s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
@@ -749,15 +1034,28 @@
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
+ s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
+ universal_camera_init();
+
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 62e4f43..509a435 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -339,6 +339,13 @@
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (soc_is_exynos4212()) {
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+ tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+ S5P_USE_STANDBYWFE_ISP_ARM);
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+ }
+
/* Save Power control register */
asm ("mrc p15, 0, %0, c15, c0, 0"
: "=r" (tmp) : : "cc");
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
index 7ea9eb2..bba48f5 100644
--- a/arch/arm/mach-exynos4/pmu.c
+++ b/arch/arm/mach-exynos4/pmu.c
@@ -16,160 +16,215 @@
#include <mach/regs-clock.h>
#include <mach/pmu.h>
-static void __iomem *sys_powerdown_reg[] = {
- S5P_ARM_CORE0_LOWPWR,
- S5P_DIS_IRQ_CORE0,
- S5P_DIS_IRQ_CENTRAL0,
- S5P_ARM_CORE1_LOWPWR,
- S5P_DIS_IRQ_CORE1,
- S5P_DIS_IRQ_CENTRAL1,
- S5P_ARM_COMMON_LOWPWR,
- S5P_L2_0_LOWPWR,
- S5P_L2_1_LOWPWR,
- S5P_CMU_ACLKSTOP_LOWPWR,
- S5P_CMU_SCLKSTOP_LOWPWR,
- S5P_CMU_RESET_LOWPWR,
- S5P_APLL_SYSCLK_LOWPWR,
- S5P_MPLL_SYSCLK_LOWPWR,
- S5P_VPLL_SYSCLK_LOWPWR,
- S5P_EPLL_SYSCLK_LOWPWR,
- S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
- S5P_CMU_RESET_GPSALIVE_LOWPWR,
- S5P_CMU_CLKSTOP_CAM_LOWPWR,
- S5P_CMU_CLKSTOP_TV_LOWPWR,
- S5P_CMU_CLKSTOP_MFC_LOWPWR,
- S5P_CMU_CLKSTOP_G3D_LOWPWR,
- S5P_CMU_CLKSTOP_LCD0_LOWPWR,
- S5P_CMU_CLKSTOP_LCD1_LOWPWR,
- S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
- S5P_CMU_CLKSTOP_GPS_LOWPWR,
- S5P_CMU_RESET_CAM_LOWPWR,
- S5P_CMU_RESET_TV_LOWPWR,
- S5P_CMU_RESET_MFC_LOWPWR,
- S5P_CMU_RESET_G3D_LOWPWR,
- S5P_CMU_RESET_LCD0_LOWPWR,
- S5P_CMU_RESET_LCD1_LOWPWR,
- S5P_CMU_RESET_MAUDIO_LOWPWR,
- S5P_CMU_RESET_GPS_LOWPWR,
- S5P_TOP_BUS_LOWPWR,
- S5P_TOP_RETENTION_LOWPWR,
- S5P_TOP_PWR_LOWPWR,
- S5P_LOGIC_RESET_LOWPWR,
- S5P_ONENAND_MEM_LOWPWR,
- S5P_MODIMIF_MEM_LOWPWR,
- S5P_G2D_ACP_MEM_LOWPWR,
- S5P_USBOTG_MEM_LOWPWR,
- S5P_HSMMC_MEM_LOWPWR,
- S5P_CSSYS_MEM_LOWPWR,
- S5P_SECSS_MEM_LOWPWR,
- S5P_PCIE_MEM_LOWPWR,
- S5P_SATA_MEM_LOWPWR,
- S5P_PAD_RETENTION_DRAM_LOWPWR,
- S5P_PAD_RETENTION_MAUDIO_LOWPWR,
- S5P_PAD_RETENTION_GPIO_LOWPWR,
- S5P_PAD_RETENTION_UART_LOWPWR,
- S5P_PAD_RETENTION_MMCA_LOWPWR,
- S5P_PAD_RETENTION_MMCB_LOWPWR,
- S5P_PAD_RETENTION_EBIA_LOWPWR,
- S5P_PAD_RETENTION_EBIB_LOWPWR,
- S5P_PAD_RETENTION_ISOLATION_LOWPWR,
- S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
- S5P_XUSBXTI_LOWPWR,
- S5P_XXTI_LOWPWR,
- S5P_EXT_REGULATOR_LOWPWR,
- S5P_GPIO_MODE_LOWPWR,
- S5P_GPIO_MODE_MAUDIO_LOWPWR,
- S5P_CAM_LOWPWR,
- S5P_TV_LOWPWR,
- S5P_MFC_LOWPWR,
- S5P_G3D_LOWPWR,
- S5P_LCD0_LOWPWR,
- S5P_LCD1_LOWPWR,
- S5P_MAUDIO_LOWPWR,
- S5P_GPS_LOWPWR,
- S5P_GPS_ALIVE_LOWPWR,
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+ /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
};
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
- /* { AFTR, LPA, SLEEP }*/
- { 0, 0, 2 }, /* ARM_CORE0 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */
- { 0, 0, 2 }, /* ARM_CORE1 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */
- { 0, 0, 2 }, /* ARM_COMMON */
- { 2, 2, 3 }, /* ARM_CPU_L2_0 */
- { 2, 2, 3 }, /* ARM_CPU_L2_1 */
- { 1, 0, 0 }, /* CMU_ACLKSTOP */
- { 1, 0, 0 }, /* CMU_SCLKSTOP */
- { 1, 1, 0 }, /* CMU_RESET */
- { 1, 0, 0 }, /* APLL_SYSCLK */
- { 1, 0, 0 }, /* MPLL_SYSCLK */
- { 1, 0, 0 }, /* VPLL_SYSCLK */
- { 1, 1, 0 }, /* EPLL_SYSCLK */
- { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */
- { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */
- { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */
- { 1, 1, 0 }, /* CMU_CLKSTOP_TV */
- { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */
- { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */
- { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */
- { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */
- { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */
- { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */
- { 1, 1, 0 }, /* CMU_RESET_CAM */
- { 1, 1, 0 }, /* CMU_RESET_TV */
- { 1, 1, 0 }, /* CMU_RESET_MFC */
- { 1, 1, 0 }, /* CMU_RESET_G3D */
- { 1, 1, 0 }, /* CMU_RESET_LCD0 */
- { 1, 1, 0 }, /* CMU_RESET_LCD1 */
- { 1, 1, 0 }, /* CMU_RESET_MAUDIO */
- { 1, 1, 0 }, /* CMU_RESET_GPS */
- { 3, 0, 0 }, /* TOP_BUS */
- { 1, 0, 1 }, /* TOP_RETENTION */
- { 3, 0, 3 }, /* TOP_PWR */
- { 1, 1, 0 }, /* LOGIC_RESET */
- { 3, 0, 0 }, /* ONENAND_MEM */
- { 3, 0, 0 }, /* MODIMIF_MEM */
- { 3, 0, 0 }, /* G2D_ACP_MEM */
- { 3, 0, 0 }, /* USBOTG_MEM */
- { 3, 0, 0 }, /* HSMMC_MEM */
- { 3, 0, 0 }, /* CSSYS_MEM */
- { 3, 0, 0 }, /* SECSS_MEM */
- { 3, 0, 0 }, /* PCIE_MEM */
- { 3, 0, 0 }, /* SATA_MEM */
- { 1, 0, 0 }, /* PAD_RETENTION_DRAM */
- { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */
- { 1, 0, 0 }, /* PAD_RETENTION_GPIO */
- { 1, 0, 0 }, /* PAD_RETENTION_UART */
- { 1, 0, 0 }, /* PAD_RETENTION_MMCA */
- { 1, 0, 0 }, /* PAD_RETENTION_MMCB */
- { 1, 0, 0 }, /* PAD_RETENTION_EBIA */
- { 1, 0, 0 }, /* PAD_RETENTION_EBIB */
- { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */
- { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */
- { 1, 1, 0 }, /* XUSBXTI */
- { 1, 1, 0 }, /* XXTI */
- { 1, 1, 0 }, /* EXT_REGULATOR */
- { 1, 0, 0 }, /* GPIO_MODE */
- { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */
- { 7, 0, 0 }, /* CAM */
- { 7, 0, 0 }, /* TV */
- { 7, 0, 0 }, /* MFC */
- { 7, 0, 0 }, /* G3D */
- { 7, 0, 0 }, /* LCD0 */
- { 7, 0, 0 }, /* LCD1 */
- { 7, 7, 0 }, /* MAUDIO */
- { 7, 0, 0 }, /* GPS */
- { 7, 0, 0 }, /* GPS_ALIVE */
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } },
+ /* XXX_OPTION register should be set other field */
+ { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } },
+ { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
};
void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
{
- unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+ unsigned int i;
- for (; count > 0; count--)
- __raw_writel(sys_powerdown_val[count - 1][mode],
- sys_powerdown_reg[count - 1]);
+ for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+ __raw_writel(exynos4_pmu_config[i].val[mode],
+ exynos4_pmu_config[i].reg);
}
+
+static int __init exynos4_pmu_init(void)
+{
+ exynos4_pmu_config = exynos4210_pmu_config;
+
+ if (soc_is_exynos4210()) {
+ exynos4_pmu_config = exynos4210_pmu_config;
+ pr_info("EXYNOS4210 PMU Initialize\n");
+ } else if (soc_is_exynos4212()) {
+ exynos4_pmu_config = exynos4212_pmu_config;
+ pr_info("EXYNOS4212 PMU Initialize\n");
+ } else {
+ pr_info("EXYNOS4: PMU not supported\n");
+ }
+
+ return 0;
+}
+arch_initcall(exynos4_pmu_init);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3700cf3..5261a7e 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -6,7 +6,6 @@
bool
depends on ARCH_S3C2410
select CPU_ARM920T
- select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index b2b2a5b..ae8e482 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-#include <plat/dma.h>
#include <linux/sysdev.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
@@ -51,6 +50,18 @@
DMACH_MAX, /* the end entry */
};
+static inline bool samsung_dma_has_circular(void)
+{
+ return false;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+ return false;
+}
+
+#include <plat/dma.h>
+
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
@@ -163,7 +174,7 @@
struct s3c2410_dma_client *client;
/* channel configuration */
- enum s3c2410_dmasrc source;
+ enum dma_data_direction source;
enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
@@ -196,9 +207,4 @@
typedef unsigned long dma_device_t;
-static inline bool s3c_dma_has_circular(void)
-{
- return false;
-}
-
#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index bab1392..c53ad34 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
- /* 1:1 mapping between cfgpin and setcfg calls at the moment */
- s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
index d67819d..c410a07 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -17,11 +17,11 @@
#include <mach/regs-gpio.h>
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
{
- struct s3c_gpio_chip *chip;
+ struct samsung_gpio_chip *chip;
if (pin > S3C_GPIO_END)
return NULL;
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index 45eea52..2eef7e6 100644
--- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -64,4 +64,4 @@
}
static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 5e06c72..df6434f 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -102,6 +102,7 @@
#define S3C2443_PCLKCON_UART3 (1<<3)
#define S3C2443_PCLKCON_IIC (1<<4)
#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_HSSPI (1<<6)
#define S3C2443_PCLKCON_ADC (1<<7)
#define S3C2443_PCLKCON_AC97 (1<<8)
#define S3C2443_PCLKCON_IIS (1<<9)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index f1d3bd8..a99c2f4 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -72,8 +72,8 @@
void __init s3c2410_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
}
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index c61e326..d2a7d5ef 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -130,11 +130,11 @@
static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
- enum s3c2410_dmasrc dir)
+ enum dma_data_direction dir)
{
unsigned long chsel;
- if (dir == S3C2410_DMASRC_HW)
+ if (dir == DMA_FROM_DEVICE)
chsel = map->channels_rx[0];
else
chsel = map->channels[0];
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 0000000..4526f6b
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPB(0))
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPF(0) &&
+ pin <= S3C2410_GPG(16))
+ return -EINVAL;
+
+ if (pin > S3C2410_GPH(16))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(chip->base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, chip->base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 69b48a7..84c7b03 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -13,7 +13,6 @@
select CPU_ARM926T
select S3C2416_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
- select S3C_GPIO_PULL_UPDOWN
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
help
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 21a5e81..196fb37 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -38,6 +38,32 @@
[7] = 8,
};
+static struct clksrc_clk hsspi_eplldiv = {
+ .clk = {
+ .name = "hsspi-eplldiv",
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = (1 << 14),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+ [0] = &hsspi_eplldiv.clk,
+ [1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+ .clk = {
+ .name = "hsspi-if",
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = hsspi_sources,
+ .nr_sources = ARRAY_SIZE(hsspi_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
static struct clksrc_clk hsmmc_div[] = {
[0] = {
.clk = {
@@ -114,6 +140,8 @@
static struct clksrc_clk *clksrcs[] __initdata = {
+ &hsspi_eplldiv,
+ &hsspi_mux,
&hsmmc_div[0],
&hsmmc_div[1],
&hsmmc_mux[0],
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 494ce91..3156b7a 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -118,8 +118,8 @@
void __init s3c2416_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+ s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
/* initialize device information early */
s3c2416_default_sdhci0();
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index c461fb8..914e620 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,7 +5,6 @@
config CPU_S3C2440
bool
select CPU_ARM920T
- select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C2410_DMA
@@ -17,7 +16,6 @@
config CPU_S3C2442
bool
select CPU_ARM920T
- select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_PM if PM
select CPU_S3C244X
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ce99ff7..fc84e481 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -68,6 +68,6 @@
{
s3c244x_map_io();
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 9ad99f8..48e273c 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -180,6 +180,6 @@
{
s3c244x_map_io();
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index d8eb868..8814031 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -10,7 +10,6 @@
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
- select S3C_GPIO_PULL_S3C2443
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 38058af..cd51d04 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -57,10 +57,6 @@
/* clock selections */
-static struct clk clk_i2s_ext = {
- .name = "i2s-ext",
-};
-
/* armdiv
*
* this clock is sourced from msysclk and can have a number of
@@ -173,7 +169,7 @@
static struct clksrc_clk clk_hsspi = {
.clk = {
- .name = "hsspi",
+ .name = "hsspi-if",
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
@@ -235,48 +231,6 @@
},
};
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
- .clk = {
- .name = "i2s-eplldiv",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
- [0] = &clk_i2s_eplldiv.clk,
- [1] = &clk_i2s_ext,
- [2] = &clk_epllref.clk,
- [3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
- .clk = {
- .name = "i2s-if",
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
-
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_i2s_srclist,
- .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
/* standard clock definitions */
static struct clk init_clocks_off[] = {
@@ -286,11 +240,6 @@
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
}, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIS,
- }, {
.name = "spi",
.devname = "s3c2410-spi.0",
.parent = &clk_p,
@@ -312,8 +261,6 @@
static struct clksrc_clk *clksrcs[] __initdata = {
&clk_arm,
- &clk_i2s_eplldiv,
- &clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
};
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index e6a28ba..5df6458 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -90,8 +90,8 @@
void __init s3c2443_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+ s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+ s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f057b6a..5552e04 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -288,5 +288,6 @@
select S3C_DEV_RTC
select S3C64XX_DEV_SPI
select S3C24XX_GPIO_EXTRA128
+ select I2C
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 61b4034..902ab9a 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -13,7 +13,6 @@
# Core files
obj-y += cpu.o
obj-y += clock.o
-obj-y += gpiolib.o
# Core support for S3C6400 system
@@ -55,7 +54,7 @@
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
# device support
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8cf39e3..872e683 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -744,7 +744,13 @@
printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
apll, mpll, epll);
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+ /* Synchronous mode */
+ hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ else
+ /* Asynchronous mode */
+ hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 204bfaf..17d62f4 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -147,14 +147,14 @@
u32 control0, control1;
switch (chan->source) {
- case S3C2410_DMASRC_HW:
+ case DMA_FROM_DEVICE:
src = chan->dev_addr;
dst = data;
control0 = PL080_CONTROL_SRC_AHB2;
control0 |= PL080_CONTROL_DST_INCR;
break;
- case S3C2410_DMASRC_MEM:
+ case DMA_TO_DEVICE:
src = data;
dst = chan->dev_addr;
control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@
int s3c2410_dma_devconfig(enum dma_ch channel,
- enum s3c2410_dmasrc source,
+ enum dma_data_direction source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@
pr_debug("%s: peripheral %d\n", __func__, peripheral);
switch (source) {
- case S3C2410_DMASRC_HW:
+ case DMA_FROM_DEVICE:
config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
break;
- case S3C2410_DMASRC_MEM:
+ case DMA_TO_DEVICE:
config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
break;
@@ -740,7 +740,7 @@
}
/* Set all DMA configuration to be DMA, not SDMA */
- writel(0xffffff, S3C_SYSREG(0x110));
+ writel(0xffffff, S3C64XX_SDMA_SEL);
/* Register standard DMA controllers */
s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
deleted file mode 100644
index 92b0908..0000000
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 8 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 5 4Bit Yes 3
- * E 5 4Bit Yes None
- * F 16 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 16 4Bit[2] No None
- * L 15 4Bit[2] No None
- * M 6 4Bit No IRQ_EINT
- * N 16 2Bit No IRQ_EINT
- * O 16 2Bit Yes 7
- * P 15 2Bit Yes 8
- * Q 9 2Bit Yes 9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
- .cfg_eint = 7,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
- .cfg_eint = 3,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
- return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
- {
- .base = S3C64XX_GPA_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPA(0),
- .ngpio = S3C64XX_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S3C64XX_GPB_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPB(0),
- .ngpio = S3C64XX_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S3C64XX_GPC_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPC(0),
- .ngpio = S3C64XX_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S3C64XX_GPD_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPD(0),
- .ngpio = S3C64XX_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .base = S3C64XX_GPE_BASE,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPE(0),
- .ngpio = S3C64XX_GPIO_E_NR,
- .label = "GPE",
- },
- }, {
- .base = S3C64XX_GPG_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPG(0),
- .ngpio = S3C64XX_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S3C64XX_GPM_BASE,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPM(0),
- .ngpio = S3C64XX_GPIO_M_NR,
- .label = "GPM",
- .to_irq = s3c64xx_gpio2int_gpm,
- },
- },
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
- return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
- {
- .base = S3C64XX_GPH_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPH(0),
- .ngpio = S3C64XX_GPIO_H_NR,
- .label = "GPH",
- },
- }, {
- .base = S3C64XX_GPK_BASE + 0x4,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPK(0),
- .ngpio = S3C64XX_GPIO_K_NR,
- .label = "GPK",
- },
- }, {
- .base = S3C64XX_GPL_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPL(0),
- .ngpio = S3C64XX_GPIO_L_NR,
- .label = "GPL",
- .to_irq = s3c64xx_gpio2int_gpl,
- },
- },
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
- .cfg_eint = 2,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
- {
- .base = S3C64XX_GPF_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPF(0),
- .ngpio = S3C64XX_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S3C64XX_GPI_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPI(0),
- .ngpio = S3C64XX_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S3C64XX_GPJ_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPJ(0),
- .ngpio = S3C64XX_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S3C64XX_GPN_BASE,
- .irq_base = IRQ_EINT(0),
- .config = &gpio_2bit_cfg_eint10,
- .chip = {
- .base = S3C64XX_GPN(0),
- .ngpio = S3C64XX_GPIO_N_NR,
- .label = "GPN",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = S3C64XX_GPO_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPO(0),
- .ngpio = S3C64XX_GPIO_O_NR,
- .label = "GPO",
- },
- }, {
- .base = S3C64XX_GPP_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPP(0),
- .ngpio = S3C64XX_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .base = S3C64XX_GPQ_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPQ(0),
- .ngpio = S3C64XX_GPIO_Q_NR,
- .label = "GPQ",
- },
- },
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
- chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
- int nr_chips,
- void (*fn)(struct s3c_gpio_chip *))
-{
- for (; nr_chips > 0; nr_chips--, chips++) {
- if (fn)
- (fn)(chips);
- s3c_gpiolib_add(chips);
- }
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
- s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
- samsung_gpiolib_add_4bit);
-
- s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
- samsung_gpiolib_add_4bit2);
-
- s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
- s3c64xx_gpiolib_add_2bit);
-
- return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
new file mode 100644
index 0000000..be9074e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 0a5d926..fe1a98c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -58,11 +58,15 @@
DMACH_MAX /* the end */
};
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
{
return true;
}
+static inline bool samsung_dma_is_dmadev(void)
+{
+ return false;
+}
#define S3C2410_DMAF_CIRCULAR (1 << 0)
#include <plat/dma.h>
@@ -95,7 +99,7 @@
unsigned char peripheral;
unsigned int flags;
- enum s3c2410_dmasrc source;
+ enum dma_data_direction source;
dma_addr_t dev_addr;
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index 38659be..fcf3dca 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -104,7 +104,7 @@
__raw_writel(0, S3C64XX_SLPEN);
}
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
{
/* turn on the sleep mode and keep it there, as it seems that during
* suspend the xCON registers get re-set and thus you can end up with
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9..b91e020 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -21,8 +21,11 @@
#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
#define S3C64XX_OTHERS S3C_SYSREG(0x900)
#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
new file mode 100644
index 0000000..6666856
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -0,0 +1,182 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+ {
+ .name = "Sub LPF",
+ .rate = 48000,
+ .regs = {
+ 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+ {
+ .name = "Sub HPF",
+ .rate = 48000,
+ .regs = {
+ 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .micdet_def = 1,
+ .inl_mode = WM8996_DIFFERRENTIAL_1,
+ .inr_mode = WM8996_DIFFERRENTIAL_1,
+
+ .irq_flags = IRQF_TRIGGER_RISING,
+
+ .gpio_default = {
+ 0x8001, /* GPIO1 == ADCLRCLK1 */
+ 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+ 0x0141, /* GPIO3 == HP_SEL */
+ 0x0002, /* GPIO4 == IRQ */
+ 0x020e, /* GPIO5 == CLKOUT */
+ },
+
+ .retune_mobile_cfgs = wm8996_retune,
+ .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+ .gpio_init = {
+ 0,
+ WM8962_GPIO_FN_OPCLK,
+ WM8962_GPIO_FN_DMICCLK,
+ 0,
+ 0x8000 | WM8962_GPIO_FN_DMICDAT,
+ WM8962_GPIO_FN_IRQ, /* Open drain mode */
+ },
+ .irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+ .irq_high = false,
+ .irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+ { I2C_BOARD_INFO("wm8996", 0x1a),
+ .platform_data = &wm8996_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+ { I2C_BOARD_INFO("wm5100", 0x1a),
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+ { I2C_BOARD_INFO("wm8962", 0x1a),
+ .platform_data = &wm8962_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
+
+
+static __devinitdata const struct {
+ u8 id;
+ const char *name;
+ const struct i2c_board_info *i2c_devs;
+ int num_i2c_devs;
+} gf_mods[] = {
+ { .id = 0x01, .name = "1250-EV1 Springbank" },
+ { .id = 0x02, .name = "1251-EV1 Jura" },
+ { .id = 0x03, .name = "1252-EV1 Glenlivet" },
+ { .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+ { .id = 0x21, .name = "1275-EV1 Mortlach" },
+ { .id = 0x25, .name = "1274-EV1 Glencadam" },
+ { .id = 0x31, .name = "1253-EV1 Tomatin", },
+ { .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+ .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+ { .id = 0x3a, .name = "1259-EV1 Tobermory",
+ .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+ { .id = 0x3b, .name = "1255-EV1 Kilchoman",
+ .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+ { .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *i2c_id)
+{
+ int ret, i, j, id, rev;
+
+ ret = i2c_smbus_read_byte_data(i2c, 0);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+ return ret;
+ }
+
+ id = (ret & 0xfe) >> 2;
+ rev = ret & 0x3;
+ for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+ if (id == gf_mods[i].id)
+ break;
+
+ if (i < ARRAY_SIZE(gf_mods)) {
+ dev_info(&i2c->dev, "%s revision %d\n",
+ gf_mods[i].name, rev + 1);
+ for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+ if (!i2c_new_device(i2c->adapter,
+ &(gf_mods[i].i2c_devs[j])))
+ dev_err(&i2c->dev,
+ "Failed to register dev: %d\n", ret);
+ }
+ } else {
+ dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+ id, rev);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+ { "wlf-gf-module", 0 },
+ { }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+ .driver = {
+ .name = "wlf-gf-module",
+ .owner = THIS_MODULE,
+ },
+ .probe = wlf_gf_module_probe,
+ .id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+ return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f32ec68..30afaa5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -47,6 +47,7 @@
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include <mach/crag6410.h>
#include <mach/regs-gpio-memport.h>
@@ -65,17 +66,6 @@
#include <plat/iic.h>
#include <plat/pm.h>
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
-
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@
.id = -1,
};
+static struct platform_device lowland_device = {
+ .name = "lowland",
+ .id = -1,
+};
+
static struct platform_device speyside_wm8962_device = {
.name = "speyside-wm8962",
.id = -1,
@@ -295,6 +290,8 @@
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
};
static struct regulator_init_data wallvdd_data = {
@@ -342,6 +339,7 @@
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
+ &lowland_device,
&wallvdd_device,
};
@@ -350,6 +348,12 @@
.irq_base = 0,
};
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+ .dvs_control_src = 1,
+ .dvs_gpio = S3C64XX_GPK(0),
+};
+
static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
@@ -365,6 +369,7 @@
.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
.consumer_supplies = vddarm_consumers,
.supply_regulator = "WALLVDD",
+ .driver_data = &vddarm_pdata,
};
static struct regulator_init_data vddint __initdata = {
@@ -500,6 +505,8 @@
.backup = &banff_backup_pdata,
.gpio_defaults = {
+ /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+ [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -557,8 +564,12 @@
};
static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+ REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD3", "1-001a"),
REGULATOR_SUPPLY("CPVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD2", "1-001a"),
REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -611,81 +622,16 @@
.disable_touch = true,
};
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
- {
- .name = "Sub LPF",
- .rate = 48000,
- .regs = {
- 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
- {
- .name = "Sub HPF",
- .rate = 48000,
- .regs = {
- 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .gpio_base = CODEC_GPIO_BASE,
- .micdet_def = 1,
- .inl_mode = WM8996_DIFFERRENTIAL_1,
- .inr_mode = WM8996_DIFFERRENTIAL_1,
-
- .irq_flags = IRQF_TRIGGER_RISING,
-
- .gpio_default = {
- 0x8001, /* GPIO1 == ADCLRCLK1 */
- 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
- 0x0141, /* GPIO3 == HP_SEL */
- 0x0002, /* GPIO4 == IRQ */
- 0x020e, /* GPIO5 == CLKOUT */
- },
-
- .retune_mobile_cfgs = wm8996_retune,
- .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
- .gpio_init = {
- 0,
- WM8962_GPIO_FN_OPCLK,
- WM8962_GPIO_FN_DMICCLK,
- 0,
- 0x8000 | WM8962_GPIO_FN_DMICDAT,
- WM8962_GPIO_FN_IRQ, /* Open drain mode */
- },
- .irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
- .irq_high = false,
- .irq_cmos = false,
-};
-
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
- { I2C_BOARD_INFO("wm8996", 0x1a),
- .platform_data = &wm8996_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
- { I2C_BOARD_INFO("wm8962", 0x1a),
- .platform_data = &wm8962_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
};
static void __init crag6410_map_io(void)
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 055e285..b375cd5 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -29,6 +29,7 @@
#include <mach/regs-clock.h>
#include <mach/regs-syscon-power.h>
#include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
@@ -85,6 +86,9 @@
SAVE_ITEM(S3C64XX_MEM0CONSLP0),
SAVE_ITEM(S3C64XX_MEM0CONSLP1),
SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+ SAVE_ITEM(S3C64XX_SDMA_SEL),
+ SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
};
void s3c_pm_configure_extint(void)
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518..e361c41 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,18 +9,24 @@
config CPU_S5P6440
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_HRT
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_HRT
help
Enable S5P6450 CPU support
+config S5P64X0_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5P64X0 based boards with a LCD display
+ through RGB interface.
+
config S5P64X0_SETUP_I2C1
bool
help
@@ -31,6 +37,7 @@
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
+ select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
@@ -39,6 +46,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
@@ -46,6 +54,7 @@
config MACH_SMDK6450
bool "SMDK6450"
select CPU_S5P6450
+ select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
@@ -54,6 +63,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6450
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf..eb74680 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -12,7 +12,7 @@
# Core support for S5P64X0 system
-obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
@@ -28,3 +28,4 @@
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd30..c54c65d 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -146,7 +146,8 @@
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 8),
}, {
- .name = "pdma",
+ .name = "dma",
+ .devname = "dma-pl330",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
@@ -499,6 +500,11 @@
&clk_pclk_low,
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
void __init_or_cpufreq s5p6440_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -581,5 +587,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16c..2d04abf 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -179,7 +179,8 @@
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "pdma",
+ .name = "dma",
+ .devname = "dma-pl330",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
@@ -553,6 +554,11 @@
&clk_sclk_audio0,
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
void __init_or_cpufreq s5p6450_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -632,5 +638,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c0095..617da3b 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -38,6 +38,7 @@
#include <plat/s5p6440.h>
#include <plat/s5p6450.h>
#include <plat/adc-core.h>
+#include <plat/fb-core.h>
/* Initial IO mappings */
@@ -108,6 +109,7 @@
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
@@ -117,6 +119,7 @@
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 0e5b3e6..442dd4a 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -21,115 +21,208 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/s3c-pl330-pdata.h>
+#include <plat/irqs.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5p64x0_pdma_resource[] = {
- [0] = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA0,
- .end = IRQ_DMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
},
};
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_MAX,
- [10] = DMACH_PCM0_TX,
- [11] = DMACH_PCM0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S0_RX,
- [14] = DMACH_SPI0_TX,
- [15] = DMACH_SPI0_RX,
- [16] = DMACH_MAX,
- [17] = DMACH_MAX,
- [18] = DMACH_MAX,
- [19] = DMACH_MAX,
- [20] = DMACH_SPI1_TX,
- [21] = DMACH_SPI1_RX,
- [22] = DMACH_MAX,
- [23] = DMACH_MAX,
- [24] = DMACH_MAX,
- [25] = DMACH_MAX,
- [26] = DMACH_MAX,
- [27] = DMACH_MAX,
- [28] = DMACH_MAX,
- [29] = DMACH_PWM,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+ .peri = s5p6440_pdma_peri,
+};
+
+struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_USI_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_USI_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_UART5_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART5_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_UART4_RX,
- [9] = DMACH_UART4_TX,
- [10] = DMACH_PCM0_TX,
- [11] = DMACH_PCM0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S0_RX,
- [14] = DMACH_SPI0_TX,
- [15] = DMACH_SPI0_RX,
- [16] = DMACH_PCM1_TX,
- [17] = DMACH_PCM1_RX,
- [18] = DMACH_PCM2_TX,
- [19] = DMACH_PCM2_RX,
- [20] = DMACH_SPI1_TX,
- [21] = DMACH_SPI1_RX,
- [22] = DMACH_USI_TX,
- [23] = DMACH_USI_RX,
- [24] = DMACH_MAX,
- [25] = DMACH_I2S1_TX,
- [26] = DMACH_I2S1_RX,
- [27] = DMACH_I2S2_TX,
- [28] = DMACH_I2S2_RX,
- [29] = DMACH_PWM,
- [30] = DMACH_UART5_RX,
- [31] = DMACH_UART5_TX,
- },
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+ .peri = s5p6450_pdma_peri,
};
-static struct platform_device s5p64x0_device_pdma = {
- .name = "s3c-pl330",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
- .resource = s5p64x0_pdma_resource,
- .dev = {
+struct amba_device s5p64x0_device_pdma = {
+ .dev = {
+ .init_name = "dma-pl330",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
+ .res = {
+ .start = S5P64X0_PA_PDMA,
+ .end = S5P64X0_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_DMA0, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5p64x0_dma_init(void)
@@ -139,7 +232,7 @@
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
- platform_device_register(&s5p64x0_device_pdma);
+ amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb..5a622af 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5837a36..53982db 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -87,6 +87,10 @@
#define IRQ_I2S0 IRQ_I2SV40
+#define IRQ_LCD_FIFO IRQ_DISPCON0
+#define IRQ_LCD_VSYNC IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM IRQ_DISPCON2
+
/* S5P6450 EINT feature will be added */
/*
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 95c9125..c5ef50c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -47,6 +47,8 @@
#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5P64X0_PA_FB 0xEE000000
+
#define S5P64X0_PA_I2S 0xF2000000
#define S5P6450_PA_I2S1 0xF2800000
#define S5P6450_PA_I2S2 0xF2900000
@@ -64,6 +66,7 @@
#define S3C_PA_IIC1 S5P6440_PA_IIC1
#define S3C_PA_RTC S5P64X0_PA_RTC
#define S3C_PA_WDT S5P64X0_PA_WDT
+#define S3C_PA_FB S5P64X0_PA_FB
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
#define S5P_PA_SROMC S5P64X0_PA_SROMC
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce2547..88269ec 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,6 +34,10 @@
#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
+#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0)
+
/* External interrupt control registers for group0 */
#define EINT0CON0_OFFSET (0x900)
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 340f30f..b0465d4 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -23,6 +23,9 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -47,6 +50,8 @@
#include <plat/ts.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -92,6 +97,59 @@
},
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+ .win[0] = &smdk6440_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6440_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6440_GPN(5), 1);
+ gpio_set_value(S5P6440_GPN(5), 0);
+ gpio_set_value(S5P6440_GPN(5), 1);
+ gpio_free(S5P6440_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+ .set_power = smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6440_lcd_power_data,
+};
+
static struct platform_device *smdk6440_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
@@ -101,6 +159,8 @@
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6440_device_iis,
+ &s3c_device_fb,
+ &smdk6440_lcd_lte480wv,
};
static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -147,6 +207,17 @@
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void s5p6440_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
static void __init smdk6440_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
@@ -160,6 +231,9 @@
samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
+ s5p6440_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index ee0da14..2a69caa 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -23,6 +23,9 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -47,6 +50,8 @@
#include <plat/ts.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -110,6 +115,59 @@
#endif
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+ .win[0] = &smdk6450_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6450_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6450_GPN(5), 1);
+ gpio_set_value(S5P6450_GPN(5), 0);
+ gpio_set_value(S5P6450_GPN(5), 1);
+ gpio_free(S5P6450_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+ .set_power = smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6450_lcd_power_data,
+};
+
static struct platform_device *smdk6450_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
@@ -119,6 +177,9 @@
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6450_device_iis0,
+ &s3c_device_fb,
+ &smdk6450_lcd_lte480wv,
+
/* s5p6450_device_spi0 will be added */
};
@@ -166,6 +227,17 @@
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void s5p6450_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
static void __init smdk6450_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
@@ -179,6 +251,9 @@
samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
+ s5p6450_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
}
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 0000000..f346ee4
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+ if (soc_is_s5p6440()) {
+ s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+ } else if (soc_is_s5p6450()) {
+ s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+ }
+}
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e8a33c4..e538a4c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -10,7 +10,7 @@
config CPU_S5PC100
bool
select S5P_EXT_INT
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index ff5cbb3..8d47709 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -33,6 +33,11 @@
.name = "otg_phy",
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
static struct clk *clk_src_mout_href_list[] = {
[0] = &s5p_clk_27m,
[1] = &clk_fin_hpll,
@@ -454,14 +459,14 @@
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 2),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.1",
+ .name = "dma",
+ .devname = "dma-pl330.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.0",
+ .name = "dma",
+ .devname = "dma-pl330.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 0),
@@ -1276,5 +1281,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index bf4cd0f..065a087 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@@ -17,150 +21,246 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <asm/irq.h>
#include <plat/devs.h>
+#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5pc100_pdma0_resource[] = {
- [0] = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_IRDA,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_EXTERNAL,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_SPDIF,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_HSI_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_HSI_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_IRDA,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_SPI2_RX,
- [21] = DMACH_SPI2_TX,
- [22] = DMACH_AC97_MICIN,
- [23] = DMACH_AC97_PCMIN,
- [24] = DMACH_AC97_PCMOUT,
- [25] = DMACH_EXTERNAL,
- [26] = DMACH_PWM,
- [27] = DMACH_SPDIF,
- [28] = DMACH_HSI_RX,
- [29] = DMACH_HSI_TX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
};
-static struct platform_device s5pc100_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
- .resource = s5pc100_pdma0_resource,
- .dev = {
+struct amba_device s5pc100_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma0_pdata,
},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
- [0] = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
+ .res = {
+ .start = S5PC100_PA_PDMA0,
+ .end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[30] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_IRDA,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
},
};
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_IRDA,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_SPI2_RX,
- [21] = DMACH_SPI2_TX,
- [22] = DMACH_PCM0_RX,
- [23] = DMACH_PCM0_TX,
- [24] = DMACH_PCM1_RX,
- [25] = DMACH_PCM1_TX,
- [26] = DMACH_MSM_REQ0,
- [27] = DMACH_MSM_REQ1,
- [28] = DMACH_MSM_REQ2,
- [29] = DMACH_MSM_REQ3,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
};
-static struct platform_device s5pc100_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
- .resource = s5pc100_pdma1_resource,
- .dev = {
+struct amba_device s5pc100_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma1_pdata,
},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
- &s5pc100_device_pdma0,
- &s5pc100_device_pdma1,
+ .res = {
+ .start = S5PC100_PA_PDMA1,
+ .end = S5PC100_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5pc100_dma_init(void)
{
- platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+ amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index aaeb44a..f22c683 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,7 +11,7 @@
config CPU_S5PV210
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
help
@@ -93,11 +93,13 @@
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
+ select S5P_DEV_TV
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_FIMC
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f5f8fa8..4c5ac7a 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -174,6 +174,16 @@
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
@@ -203,6 +213,11 @@
.name = "pcmcdclk",
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
@@ -289,14 +304,14 @@
static struct clk init_clocks_off[] = {
{
- .name = "pdma",
- .devname = "s3c-pl330.0",
+ .name = "dma",
+ .devname = "dma-pl330.0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.1",
+ .name = "dma",
+ .devname = "dma-pl330.1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 4),
@@ -330,6 +345,40 @@
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 16),
}, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "hdmi",
+ .devname = "s5pv210-hdmi",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "hdmiphy",
+ .devname = "s5pv210-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
.name = "otg",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip1_ctrl,
@@ -407,6 +456,12 @@
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<9),
}, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &clk_pclk_psys.clk,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.parent = &clk_pclk_psys.clk,
@@ -594,6 +649,23 @@
.nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
};
+static struct clksrc_clk clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
+ &clk_sclk_mixer,
+};
+
static struct clk *clkset_sclk_audio0_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_pcmcdclk0,
@@ -777,14 +849,6 @@
.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_mixer",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 1),
- },
- .sources = &clkset_sclk_mixer,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
- }, {
- .clk = {
.name = "sclk_fimc",
.devname = "s5pv210-fimc.0",
.enable = s5pv210_clk_mask1_ctrl,
@@ -973,9 +1037,6 @@
&clk_pclk_psys,
&clk_vpllsrc,
&clk_sclk_vpll,
- &clk_sclk_dac,
- &clk_sclk_pixel,
- &clk_sclk_hdmi,
&clk_mout_dmc0,
&clk_sclk_dmc0,
&clk_sclk_audio0,
@@ -1060,6 +1121,61 @@
.get_rate = s5p_epll_get_rate,
};
+static u32 vpll_div[][5] = {
+ { 54000000, 3, 53, 3, 0 },
+ { 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con = __raw_readl(S5P_VPLL_CON);
+ vpll_con &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+ if (vpll_div[i][0] == rate) {
+ vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+ vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+ vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+ vpll_con |= vpll_div[i][4] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con, S5P_VPLL_CON);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+ .get_rate = s5pv210_vpll_get_rate,
+ .set_rate = s5pv210_vpll_set_rate,
+};
+
void __init_or_cpufreq s5pv210_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -1108,6 +1224,7 @@
clk_fout_apll.ops = &clk_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &s5pv210_vpll_ops;
clk_fout_vpll.rate = vpll;
printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1153,11 +1270,15 @@
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+ s3c_register_clksrc(sclk_tv[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec..6b8cdcc 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -41,6 +41,7 @@
#include <plat/keypad-core.h>
#include <plat/sdhci.h>
#include <plat/reset.h>
+#include <plat/tv-core.h>
/* Initial IO mappings */
@@ -143,6 +144,9 @@
/* Use s5pv210-keypad instead of samsung-keypad */
samsung_keypad_setname("s5pv210-keypad");
+
+ /* setup TV devices */
+ s5p_hdmi_setname("s5pv210-hdmi");
}
void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 497d343..86b749c 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pv210/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@@ -17,151 +21,240 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5pv210_pdma0_resource[] = {
- [0] = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_SPDIF,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_MAX,
- [15] = DMACH_MAX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_MAX,
- [21] = DMACH_MAX,
- [22] = DMACH_AC97_MICIN,
- [23] = DMACH_AC97_PCMIN,
- [24] = DMACH_AC97_PCMOUT,
- [25] = DMACH_MAX,
- [26] = DMACH_PWM,
- [27] = DMACH_SPDIF,
- [28] = DMACH_MAX,
- [29] = DMACH_MAX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
};
-static struct platform_device s5pv210_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource),
- .resource = s5pv210_pdma0_resource,
- .dev = {
+struct amba_device s5pv210_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma0_pdata,
},
-};
-
-static struct resource s5pv210_pdma1_resource[] = {
- [0] = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
+ .res = {
+ .start = S5PV210_PA_PDMA0,
+ .end = S5PV210_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[32] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_MAX,
- [21] = DMACH_MAX,
- [22] = DMACH_PCM0_RX,
- [23] = DMACH_PCM0_TX,
- [24] = DMACH_PCM1_RX,
- [25] = DMACH_PCM1_TX,
- [26] = DMACH_MSM_REQ0,
- [27] = DMACH_MSM_REQ1,
- [28] = DMACH_MSM_REQ2,
- [29] = DMACH_MSM_REQ3,
- [30] = DMACH_PCM2_RX,
- [31] = DMACH_PCM2_TX,
- },
+struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
};
-static struct platform_device s5pv210_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource),
- .resource = s5pv210_pdma1_resource,
- .dev = {
+struct amba_device s5pv210_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma1_pdata,
},
-};
-
-static struct platform_device *s5pv210_dmacs[] __initdata = {
- &s5pv210_device_pdma0,
- &s5pv210_device_pdma1,
+ .res = {
+ .start = S5PV210_PA_PDMA1,
+ .end = S5PV210_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5pv210_dma_init(void)
{
- platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+ amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
new file mode 100644
index 0000000..6afa624
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM (3)
+
+#endif
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index b9f9ec3..5e0de3a 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -56,7 +56,7 @@
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC3 S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
@@ -86,7 +86,7 @@
#define IRQ_HDMI S5P_IRQ_VIC2(12)
#define IRQ_IIC1 S5P_IRQ_VIC2(13)
#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_SDO S5P_IRQ_VIC2(15)
#define IRQ_I2S0 S5P_IRQ_VIC2(16)
#define IRQ_I2S1 S5P_IRQ_VIC2(17)
#define IRQ_I2S2 S5P_IRQ_VIC2(18)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index aac343c..7ff609f 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,12 @@
#define S5PV210_PA_FIMC1 0xFB300000
#define S5PV210_PA_FIMC2 0xFB400000
+#define S5PV210_PA_SDO 0xF9000000
+#define S5PV210_PA_VP 0xF9100000
+#define S5PV210_PA_MIXER 0xF9200000
+#define S5PV210_PA_HDMI 0xFA100000
+#define S5PV210_PA_IIC_HDMIPHY 0xFA900000
+
/* Compatibiltiy Defines */
#define S3C_PA_FB S5PV210_PA_FB
@@ -110,6 +116,13 @@
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
#define S5P_PA_MFC S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO S5PV210_PA_SDO
+#define S5P_PA_VP S5PV210_PA_VP
+#define S5P_PA_MIXER S5PV210_PA_MIXER
+#define S5P_PA_HDMI S5PV210_PA_HDMI
+
#define S5P_PA_ONENAND S5PC110_PA_ONENAND
#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
index 3e22109..eba8aea 100644
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -43,4 +43,4 @@
}
static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 78925c5..032de66 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -144,8 +144,9 @@
#define S5P_OTHERS S5P_CLKREG(0xE000)
#define S5P_OM_STAT S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804)
#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810)
#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
#define S5P_MIPI_DPHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_SRESETN (1 << 1)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51..01e4867 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -48,6 +48,11 @@
#include <plat/s5p-time.h>
#include <plat/mfc.h>
#include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -272,6 +277,14 @@
i2c2_devs[0].irq = gpio_to_irq(gpio);
}
+static void goni_camera_init(void)
+{
+ s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+ /* Set max driver strength on CAM_A_CLKOUT pin. */
+ s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
@@ -285,6 +298,7 @@
static struct regulator_consumer_supply goni_ldo8_consumers[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_consumer_supply goni_ldo11_consumers[] = {
@@ -475,6 +489,10 @@
static struct regulator_consumer_supply buck2_consumer =
REGULATOR_SUPPLY("vddint", NULL);
+static struct regulator_consumer_supply buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
static struct regulator_init_data goni_buck1_data = {
.constraints = {
.name = "VARM_1.2V",
@@ -511,6 +529,8 @@
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &buck3_consumer,
};
static struct regulator_init_data goni_buck4_data = {
@@ -801,6 +821,39 @@
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+ .clk_rate = 16000000UL,
+ .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
+ .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+ I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+ .platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &noon010pc30_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 16000000UL,
+ },
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+ .isp_info = goni_camera_sensors,
+ .num_clients = ARRAY_SIZE(goni_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+ .name = "s5p-fimc-md",
+ .id = -1,
+};
+
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
@@ -812,10 +865,13 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+ &s5p_device_mixer,
+ &s5p_device_sdo,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
@@ -884,6 +940,12 @@
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* FIMC */
+ s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ goni_camera_init();
+
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 8c5b302..d8973ac 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,6 @@
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_DEV_NAND
- select S3C_GPIO_CFG_S3C24XX
help
Base platform code for any Samsung S3C24XX device
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 0291bd6..e4f4649 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -15,8 +15,6 @@
obj-y += cpu.o
obj-y += irq.o
obj-y += devs.o
-obj-y += gpio.o
-obj-y += gpiolib.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 539bd0e..53754bcf 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1094,14 +1094,14 @@
*
* configure the dma source/destination hardware type and address
*
- * source: S3C2410_DMASRC_HW: source is hardware
- * S3C2410_DMASRC_MEM: source is memory
+ * source: DMA_FROM_DEVICE: source is hardware
+ * DMA_TO_DEVICE: source is memory
*
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(enum dma_ch channel,
- enum s3c2410_dmasrc source,
+ enum dma_data_direction source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1131,7 +1131,7 @@
hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
- case S3C2410_DMASRC_HW:
+ case DMA_FROM_DEVICE:
/* source is hardware */
pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
@@ -1142,7 +1142,7 @@
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
break;
- case S3C2410_DMASRC_MEM:
+ case DMA_TO_DEVICE:
/* source is memory */
pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
deleted file mode 100644
index 2f3d7c0..0000000
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- int ret;
-
- WARN_ON(to); /* should be none of these left */
-
- if (!to) {
- /* if pull is enabled, try first with up, and if that
- * fails, try using down */
-
- ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
- if (ret)
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
- } else {
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
- }
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- /* do this via gpiolib until all users removed */
-
- gpio_request(pin, "temporary");
- gpio_set_value(pin, to);
- gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
-
- return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
-
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
- local_irq_restore(flags);
-
- return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
deleted file mode 100644
index 243b641..0000000
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
- return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- dat = __raw_readl(base + 0x04);
-
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
-
- __raw_writel(dat, base + 0x04);
-
- con &= ~(1 << offset);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
- if (offset < 4)
- return IRQ_EINT0 + offset;
-
- if (offset < 8)
- return IRQ_EINT4 + offset - 4;
-
- return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
- .set_config = s3c_gpio_setcfg_s3c24xx_a,
- .get_config = s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
- [0] = {
- .base = S3C2410_GPACON,
- .pm = __gpio_pm(&s3c_gpio_pm_1bit),
- .config = &s3c24xx_gpiocfg_banka,
- .chip = {
- .base = S3C2410_GPA(0),
- .owner = THIS_MODULE,
- .label = "GPIOA",
- .ngpio = 24,
- .direction_input = s3c24xx_gpiolib_banka_input,
- .direction_output = s3c24xx_gpiolib_banka_output,
- },
- },
- [1] = {
- .base = S3C2410_GPBCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPB(0),
- .owner = THIS_MODULE,
- .label = "GPIOB",
- .ngpio = 16,
- },
- },
- [2] = {
- .base = S3C2410_GPCCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPC(0),
- .owner = THIS_MODULE,
- .label = "GPIOC",
- .ngpio = 16,
- },
- },
- [3] = {
- .base = S3C2410_GPDCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPD(0),
- .owner = THIS_MODULE,
- .label = "GPIOD",
- .ngpio = 16,
- },
- },
- [4] = {
- .base = S3C2410_GPECON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPE(0),
- .label = "GPIOE",
- .owner = THIS_MODULE,
- .ngpio = 16,
- },
- },
- [5] = {
- .base = S3C2410_GPFCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPF(0),
- .owner = THIS_MODULE,
- .label = "GPIOF",
- .ngpio = 8,
- .to_irq = s3c24xx_gpiolib_bankf_toirq,
- },
- },
- [6] = {
- .base = S3C2410_GPGCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .irq_base = IRQ_EINT8,
- .chip = {
- .base = S3C2410_GPG(0),
- .owner = THIS_MODULE,
- .label = "GPIOG",
- .ngpio = 16,
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = S3C2410_GPHCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPH(0),
- .owner = THIS_MODULE,
- .label = "GPIOH",
- .ngpio = 11,
- },
- },
- /* GPIOS for the S3C2443 and later devices. */
- {
- .base = S3C2440_GPJCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPJ(0),
- .owner = THIS_MODULE,
- .label = "GPIOJ",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPKCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPK(0),
- .owner = THIS_MODULE,
- .label = "GPIOK",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPLCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPL(0),
- .owner = THIS_MODULE,
- .label = "GPIOL",
- .ngpio = 15,
- },
- }, {
- .base = S3C2443_GPMCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPM(0),
- .owner = THIS_MODULE,
- .label = "GPIOM",
- .ngpio = 2,
- },
- },
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s3c24xx_gpios;
- int gpn;
-
- for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
- if (!chip->config)
- chip->config = &s3c24xx_gpiocfg_default;
-
- s3c_gpiolib_add(chip);
- }
-
- return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 59552c0..07a4c81 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -205,9 +205,64 @@
},
};
+static struct clk clk_i2s_ext = {
+ .name = "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+ .clk = {
+ .name = "i2s-eplldiv",
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+ [0] = &clk_i2s_eplldiv.clk,
+ [1] = &clk_i2s_ext,
+ [2] = &clk_epllref.clk,
+ [3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+ .clk = {
+ .name = "i2s-if",
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
+
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_i2s_srclist,
+ .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
static struct clk init_clocks_off[] = {
{
+ .name = "iis",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIS,
+ }, {
+ .name = "hsspi",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_HSSPI,
+ }, {
.name = "adc",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
@@ -406,6 +461,8 @@
};
static struct clksrc_clk *clksrcs[] __initdata = {
+ &clk_i2s_eplldiv,
+ &clk_i2s,
&clk_usb_bus_host,
&clk_epllref,
&clk_esysclk,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9843c95..f9241a7 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -16,9 +16,6 @@
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
- select S3C_GPIO_CFG_S3C64XX
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
@@ -76,6 +73,11 @@
help
Compile in platform device definitions for FIMD controller 0
+config S5P_DEV_I2C_HDMIPHY
+ bool
+ help
+ Compile in platform device definitions for I2C HDMIPHY controller
+
config S5P_DEV_MFC
bool
help
@@ -96,6 +98,11 @@
help
Compile in platform device definitions for MIPI-CSIS channel 1
+config S5P_DEV_TV
+ bool
+ help
+ Compile in platform device definition for TV interface
+
config S5P_DEV_USB_EHCI
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 4b53e04..1812019 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -31,8 +31,10 @@
obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o
obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o
+obj-$(CONFIG_S5P_DEV_I2C_HDMIPHY) += dev-i2c-hdmiphy.o
obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o
obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o
+obj-$(CONFIG_S5P_DEV_TV) += dev-tv.o
obj-$(CONFIG_S5P_DEV_USB_EHCI) += dev-ehci.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/dev-i2c-hdmiphy.c b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c
new file mode 100644
index 0000000..37343f1
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c for hdmiphy device
+ *
+ * Based on plat-samsung/dev-i2c7.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/i2c-hdmiphy.h>
+
+#include <plat/regs-iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+static struct resource s5p_i2c_resource[] = {
+ [0] = {
+ .start = S5P_PA_IIC_HDMIPHY,
+ .end = S5P_PA_IIC_HDMIPHY + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC_HDMIPHY,
+ .end = IRQ_IIC_HDMIPHY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_i2c_hdmiphy = {
+ .name = "s3c2440-hdmiphy-i2c",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_i2c_resource),
+ .resource = s5p_i2c_resource,
+};
+
+void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = S5P_I2C_HDMIPHY_BUS_NUM;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s5p_device_i2c_hdmiphy);
+}
diff --git a/arch/arm/plat-s5p/dev-tv.c b/arch/arm/plat-s5p/dev-tv.c
new file mode 100644
index 0000000..361a1b6
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-tv.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s5p/dev-tv.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * S5P series device definition for TV device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* HDMI interface */
+static struct resource s5p_hdmi_resources[] = {
+ [0] = {
+ .start = S5P_PA_HDMI,
+ .end = S5P_PA_HDMI + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_HDMI,
+ .end = IRQ_HDMI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_hdmi = {
+ .name = "s5p-hdmi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_hdmi_resources),
+ .resource = s5p_hdmi_resources,
+};
+EXPORT_SYMBOL(s5p_device_hdmi);
+
+/* SDO interface */
+static struct resource s5p_sdo_resources[] = {
+ [0] = {
+ .start = S5P_PA_SDO,
+ .end = S5P_PA_SDO + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SDO,
+ .end = IRQ_SDO,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s5p_device_sdo = {
+ .name = "s5p-sdo",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_sdo_resources),
+ .resource = s5p_sdo_resources,
+};
+EXPORT_SYMBOL(s5p_device_sdo);
+
+/* MIXER */
+static struct resource s5p_mixer_resources[] = {
+ [0] = {
+ .start = S5P_PA_MIXER,
+ .end = S5P_PA_MIXER + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "mxr"
+ },
+ [1] = {
+ .start = S5P_PA_VP,
+ .end = S5P_PA_VP + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "vp"
+ },
+ [2] = {
+ .start = IRQ_MIXER,
+ .end = IRQ_MIXER,
+ .flags = IORESOURCE_IRQ,
+ .name = "irq"
+ }
+};
+
+static u64 s5p_tv_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mixer = {
+ .name = "s5p-mixer",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mixer_resources),
+ .resource = s5p_mixer_resources,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &s5p_tv_dmamask,
+ }
+};
+EXPORT_SYMBOL(s5p_device_mixer);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 3e21b94..002ec9f 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -97,15 +97,24 @@
return (unsigned long)fvco;
}
-#define PLL46XX_KDIV_MASK (0xFFFF)
-#define PLL4650C_KDIV_MASK (0xFFF)
+/* CON0 bit-fields */
#define PLL46XX_MDIV_MASK (0x1FF)
#define PLL46XX_PDIV_MASK (0x3F)
#define PLL46XX_SDIV_MASK (0x7)
+#define PLL46XX_LOCKED_SHIFT (29)
#define PLL46XX_MDIV_SHIFT (16)
#define PLL46XX_PDIV_SHIFT (8)
#define PLL46XX_SDIV_SHIFT (0)
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK (0x1F)
+#define PLL46XX_MFR_MASK (0x3F)
+#define PLL46XX_KDIV_MASK (0xFFFF)
+#define PLL4650C_KDIV_MASK (0xFFF)
+#define PLL46XX_MRR_SHIFT (24)
+#define PLL46XX_MFR_SHIFT (16)
+#define PLL46XX_KDIV_SHIFT (0)
+
enum pll46xx_type_t {
pll_4600,
pll_4650,
@@ -148,6 +157,7 @@
#define PLL90XX_PDIV_MASK (0x3F)
#define PLL90XX_SDIV_MASK (0x7)
#define PLL90XX_KDIV_MASK (0xffff)
+#define PLL90XX_LOCKED_SHIFT (29)
#define PLL90XX_MDIV_SHIFT (16)
#define PLL90XX_PDIV_SHIFT (8)
#define PLL90XX_SDIV_SHIFT (0)
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f88216d..a566523 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -37,7 +37,7 @@
int start;
int nr_groups;
int irq;
- struct s3c_gpio_chip **chips;
+ struct samsung_gpio_chip **chips;
void (*handler)(unsigned int, struct irq_desc *);
};
@@ -87,7 +87,7 @@
chained_irq_enter(chip, desc);
for (group = 0; group < bank->nr_groups; group++) {
- struct s3c_gpio_chip *chip = bank->chips[group];
+ struct samsung_gpio_chip *chip = bank->chips[group];
if (!chip)
continue;
@@ -110,7 +110,7 @@
chained_irq_exit(chip, desc);
}
-static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
{
static int used_gpioint_groups = 0;
int group = chip->group;
@@ -131,7 +131,7 @@
return -EINVAL;
if (!bank->handler) {
- bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) *
+ bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
bank->nr_groups, GFP_KERNEL);
if (!bank->chips)
return -ENOMEM;
@@ -174,7 +174,7 @@
int __init s5p_register_gpio_interrupt(int pin)
{
- struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+ struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
int offset, group;
int ret;
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e1065..74714c1 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -79,39 +79,12 @@
configuration. GPIOlib shall be compiled only for S3C64XX and S5P
series of processors.
-config S3C_GPIO_CFG_S3C24XX
- bool
- help
- Internal configuration to enable S3C24XX style GPIO configuration
- functions.
-
config S3C_GPIO_CFG_S3C64XX
bool
help
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S3C_GPIO_PULL_UPDOWN
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_S3C2443
- bool
- select S3C_GPIO_PULL_UPDOWN
- help
- Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
-
-config S3C_GPIO_PULL_DOWN
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
config S5P_GPIO_DRVSTR
bool
help
@@ -300,11 +273,14 @@
help
Internal configuration for S3C DMA core
-config S3C_PL330_DMA
+config SAMSUNG_DMADEV
bool
- select PL330
+ select DMADEVICES
+ select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+ CPU_S5P6450 || CPU_S5P6440)
+ select ARM_AMBA
help
- S3C DMA API Driver for PL330 DMAC.
+ Use DMA device engine for PL330 DMAC.
comment "Power management"
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3de756d..5a54354 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -15,8 +15,6 @@
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
-obj-y += gpio.o
-obj-y += gpio-config.o
obj-y += dev-asocdma.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
@@ -63,9 +61,9 @@
# DMA support
-obj-$(CONFIG_S3C_DMA) += dma.o
+obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
-obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o
+obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
new file mode 100644
index 0000000..6e3d9ab
--- /dev/null
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -0,0 +1,131 @@
+/* linux/arch/arm/plat-samsung/dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+
+#include <mach/dma.h>
+
+static inline bool pl330_filter(struct dma_chan *chan, void *param)
+{
+ struct dma_pl330_peri *peri = chan->private;
+ return peri->peri_id == (unsigned)param;
+}
+
+static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
+ struct samsung_dma_info *info)
+{
+ struct dma_chan *chan;
+ dma_cap_mask_t mask;
+ struct dma_slave_config slave_config;
+
+ dma_cap_zero(mask);
+ dma_cap_set(info->cap, mask);
+
+ chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+
+ if (info->direction == DMA_FROM_DEVICE) {
+ memset(&slave_config, 0, sizeof(struct dma_slave_config));
+ slave_config.direction = info->direction;
+ slave_config.src_addr = info->fifo;
+ slave_config.src_addr_width = info->width;
+ slave_config.src_maxburst = 1;
+ dmaengine_slave_config(chan, &slave_config);
+ } else if (info->direction == DMA_TO_DEVICE) {
+ memset(&slave_config, 0, sizeof(struct dma_slave_config));
+ slave_config.direction = info->direction;
+ slave_config.dst_addr = info->fifo;
+ slave_config.dst_addr_width = info->width;
+ slave_config.dst_maxburst = 1;
+ dmaengine_slave_config(chan, &slave_config);
+ }
+
+ return (unsigned)chan;
+}
+
+static int samsung_dmadev_release(unsigned ch,
+ struct s3c2410_dma_client *client)
+{
+ dma_release_channel((struct dma_chan *)ch);
+
+ return 0;
+}
+
+static int samsung_dmadev_prepare(unsigned ch,
+ struct samsung_dma_prep_info *info)
+{
+ struct scatterlist sg;
+ struct dma_chan *chan = (struct dma_chan *)ch;
+ struct dma_async_tx_descriptor *desc;
+
+ switch (info->cap) {
+ case DMA_SLAVE:
+ sg_init_table(&sg, 1);
+ sg_dma_len(&sg) = info->len;
+ sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
+ info->len, offset_in_page(info->buf));
+ sg_dma_address(&sg) = info->buf;
+
+ desc = chan->device->device_prep_slave_sg(chan,
+ &sg, 1, info->direction, DMA_PREP_INTERRUPT);
+ break;
+ case DMA_CYCLIC:
+ desc = chan->device->device_prep_dma_cyclic(chan,
+ info->buf, info->len, info->period, info->direction);
+ break;
+ default:
+ dev_err(&chan->dev->device, "unsupported format\n");
+ return -EFAULT;
+ }
+
+ if (!desc) {
+ dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
+ return -EFAULT;
+ }
+
+ desc->callback = info->fp;
+ desc->callback_param = info->fp_param;
+
+ dmaengine_submit((struct dma_async_tx_descriptor *)desc);
+
+ return 0;
+}
+
+static inline int samsung_dmadev_trigger(unsigned ch)
+{
+ dma_async_issue_pending((struct dma_chan *)ch);
+
+ return 0;
+}
+
+static inline int samsung_dmadev_flush(unsigned ch)
+{
+ return dmaengine_terminate_all((struct dma_chan *)ch);
+}
+
+struct samsung_dma_ops dmadev_ops = {
+ .request = samsung_dmadev_request,
+ .release = samsung_dmadev_release,
+ .prepare = samsung_dmadev_prepare,
+ .trigger = samsung_dmadev_trigger,
+ .started = NULL,
+ .flush = samsung_dmadev_flush,
+ .stop = samsung_dmadev_flush,
+};
+
+void *samsung_dmadev_get_ops(void)
+{
+ return &dmadev_ops;
+}
+EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
deleted file mode 100644
index 1c0b040..0000000
--- a/arch/arm/plat-samsung/gpio-config.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- int ret;
-
- if (!chip)
- return -EINVAL;
-
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- ret = s3c_gpio_do_setcfg(chip, offset, config);
- s3c_gpio_unlock(chip, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
- unsigned int cfg)
-{
- int ret;
-
- for (; nr > 0; nr--, start++) {
- ret = s3c_gpio_cfgpin(start, cfg);
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
- unsigned int cfg, s3c_gpio_pull_t pull)
-{
- int ret;
-
- for (; nr > 0; nr--, start++) {
- s3c_gpio_setpull(start, pull);
- ret = s3c_gpio_cfgpin(start, cfg);
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- unsigned ret = 0;
- int offset;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- ret = s3c_gpio_do_getcfg(chip, offset);
- s3c_gpio_unlock(chip, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- int offset, ret;
-
- if (!chip)
- return -EINVAL;
-
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- ret = s3c_gpio_do_setpull(chip, offset, pull);
- s3c_gpio_unlock(chip, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- u32 pup = 0;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- pup = s3c_gpio_do_getpull(chip, offset);
- s3c_gpio_unlock(chip, flags);
- }
-
- return (__force s3c_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off;
- u32 con;
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
-
- /* Map output to 0, and SFN2 to 1 */
- cfg -= 1;
- if (cfg > 1)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x1 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off;
- con &= 1;
- con++;
-
- return S3C_GPIO_SFN(con);
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off * 2;
- u32 con;
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- if (cfg > 3)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x3 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off * 2;
- con &= 3;
-
- /* this conversion works for IN and OUT as well as special mode */
- return S3C_GPIO_SPECIAL(con);
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = (off & 7) * 4;
- u32 con;
-
- if (off < 8 && chip->chip.ngpio > 8)
- reg -= 4;
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0xf << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = (off & 7) * 4;
- u32 con;
-
- if (off < 8 && chip->chip.ngpio > 8)
- reg -= 4;
-
- con = __raw_readl(reg);
- con >>= shift;
- con &= 0xf;
-
- /* this conversion works for IN and OUT as well as special mode */
- return S3C_GPIO_SPECIAL(con);
-}
-
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- void __iomem *reg = chip->base + 0x08;
- int shift = off * 2;
- u32 pup;
-
- pup = __raw_readl(reg);
- pup &= ~(3 << shift);
- pup |= pull << shift;
- __raw_writel(pup, reg);
-
- return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- void __iomem *reg = chip->base + 0x08;
- int shift = off * 2;
- u32 pup = __raw_readl(reg);
-
- pup >>= shift;
- pup &= 0x3;
- return (__force s3c_gpio_pull_t)pup;
-}
-
-#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
-int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- switch (pull) {
- case S3C_GPIO_PULL_NONE:
- pull = 0x01;
- break;
- case S3C_GPIO_PULL_UP:
- pull = 0x00;
- break;
- case S3C_GPIO_PULL_DOWN:
- pull = 0x02;
- break;
- }
- return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- s3c_gpio_pull_t pull;
-
- pull = s3c_gpio_getpull_updown(chip, off);
-
- switch (pull) {
- case 0x00:
- pull = S3C_GPIO_PULL_UP;
- break;
- case 0x01:
- case 0x03:
- pull = S3C_GPIO_PULL_NONE;
- break;
- case 0x02:
- pull = S3C_GPIO_PULL_DOWN;
- break;
- }
-
- return pull;
-}
-#endif
-#endif
-
-#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
-static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull,
- s3c_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- if (pull == updown)
- pup &= ~(1 << off);
- else if (pull == S3C_GPIO_PULL_NONE)
- pup |= (1 << off);
- else
- return -EINVAL;
-
- __raw_writel(pup, reg);
- return 0;
-}
-
-static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP */
-
-#ifdef CONFIG_S3C_GPIO_PULL_DOWN
-s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned int off;
- void __iomem *reg;
- int shift;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- off = pin - chip->chip.base;
- shift = off * 2;
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = drvstr >> shift;
- drvstr &= 0x3;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned int off;
- void __iomem *reg;
- int shift;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- off = pin - chip->chip.base;
- shift = off * 2;
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp &= ~(0x3 << shift);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif /* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
deleted file mode 100644
index 7743c4b..0000000
--- a/arch/arm/plat-samsung/gpio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-#include <plat/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
- unsigned int gpn;
- int i;
-
- gpn = chip->chip.base;
- for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
- BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
- s3c_gpios[gpn] = chip;
- }
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- * gpio n: 2 bits starting at (2*n)
- * 00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long con;
-
- s3c_gpio_lock(ourchip, flags);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
-
- __raw_writel(con, base + 0x00);
-
- s3c_gpio_unlock(ourchip, flags);
- return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- s3c_gpio_lock(ourchip, flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= 1 << (offset * 2);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- s3c_gpio_unlock(ourchip, flags);
- return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
-
- s3c_gpio_lock(ourchip, flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- s3c_gpio_unlock(ourchip, flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- unsigned long val;
-
- val = __raw_readl(ourchip->base + 0x04);
- val >>= offset;
- val &= 1;
-
- return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
- struct gpio_chip *gc = &chip->chip;
- int ret;
-
- BUG_ON(!chip->base);
- BUG_ON(!gc->label);
- BUG_ON(!gc->ngpio);
-
- spin_lock_init(&chip->lock);
-
- if (!gc->direction_input)
- gc->direction_input = s3c_gpiolib_input;
- if (!gc->direction_output)
- gc->direction_output = s3c_gpiolib_output;
- if (!gc->set)
- gc->set = s3c_gpiolib_set;
- if (!gc->get)
- gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
- if (chip->pm != NULL) {
- if (!chip->pm->save || !chip->pm->resume)
- printk(KERN_ERR "gpio: %s has missing PM functions\n",
- gc->label);
- } else
- printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
- /* gpiochip_add() prints own failure message on error. */
- ret = gpiochip_add(gc);
- if (ret >= 0)
- s3c_gpiolib_track(chip);
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
- struct s3c_gpio_chip *s3c_chip = container_of(chip,
- struct s3c_gpio_chip, chip);
-
- return s3c_chip->irq_base + offset;
-}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 24ebb1e..ee5014a 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -62,6 +62,7 @@
extern struct platform_device s3c_device_i2c5;
extern struct platform_device s3c_device_i2c6;
extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s5p_device_i2c_hdmiphy;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
@@ -142,6 +143,11 @@
extern struct platform_device s5p_device_mfc;
extern struct platform_device s5p_device_mfc_l;
extern struct platform_device s5p_device_mfc_r;
+
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_sdo;
+
extern struct platform_device s5p_device_mipi_csis0;
extern struct platform_device s5p_device_mipi_csis1;
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
new file mode 100644
index 0000000..4c1a363
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -0,0 +1,63 @@
+/* arch/arm/plat-samsung/include/plat/dma-ops.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_DMA_OPS_H_
+#define __SAMSUNG_DMA_OPS_H_ __FILE__
+
+#include <linux/dmaengine.h>
+
+struct samsung_dma_prep_info {
+ enum dma_transaction_type cap;
+ enum dma_data_direction direction;
+ dma_addr_t buf;
+ unsigned long period;
+ unsigned long len;
+ void (*fp)(void *data);
+ void *fp_param;
+};
+
+struct samsung_dma_info {
+ enum dma_transaction_type cap;
+ enum dma_data_direction direction;
+ enum dma_slave_buswidth width;
+ dma_addr_t fifo;
+ struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_ops {
+ unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
+ int (*release)(unsigned ch, struct s3c2410_dma_client *client);
+ int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
+ int (*trigger)(unsigned ch);
+ int (*started)(unsigned ch);
+ int (*flush)(unsigned ch);
+ int (*stop)(unsigned ch);
+};
+
+extern void *samsung_dmadev_get_ops(void);
+extern void *s3c_dma_get_ops(void);
+
+static inline void *__samsung_dma_get_ops(void)
+{
+ if (samsung_dma_is_dmadev())
+ return samsung_dmadev_get_ops();
+ else
+ return s3c_dma_get_ops();
+}
+
+/*
+ * samsung_dma_get_ops
+ * get the set of samsung dma operations
+ */
+#define samsung_dma_get_ops() __samsung_dma_get_ops()
+
+#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
similarity index 84%
rename from arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
rename to arch/arm/plat-samsung/include/plat/dma-pl330.h
index 8107442..2e55e59 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -8,11 +8,8 @@
* (at your option) any later version.
*/
-#ifndef __S3C_DMA_PL330_H_
-#define __S3C_DMA_PL330_H_
-
-#define S3C2410_DMAF_AUTOSTART (1 << 0)
-#define S3C2410_DMAF_CIRCULAR (1 << 1)
+#ifndef __DMA_PL330_H_
+#define __DMA_PL330_H_ __FILE__
/*
* PL330 can assign any channel to communicate with
@@ -20,7 +17,7 @@
* For the sake of consistency across client drivers,
* We keep the channel names unchanged and only add
* missing peripherals are added.
- * Order is not important since S3C PL330 API driver
+ * Order is not important since DMA PL330 API driver
* use these just as IDs.
*/
enum dma_ch {
@@ -88,11 +85,20 @@
DMACH_MAX,
};
-static inline bool s3c_dma_has_circular(void)
+struct s3c2410_dma_client {
+ char *name;
+};
+
+static inline bool samsung_dma_has_circular(void)
{
return true;
}
-#include <plat/dma.h>
+static inline bool samsung_dma_is_dmadev(void)
+{
+ return true;
+}
-#endif /* __S3C_DMA_PL330_H_ */
+#include <plat/dma-ops.h>
+
+#endif /* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index ab9bce6..1c1ed54 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -41,7 +41,7 @@
void (*direction)(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
- enum s3c2410_dmasrc dir);
+ enum dma_data_direction dir);
};
extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 8c273b7..b906112 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -10,17 +10,14 @@
* published by the Free Software Foundation.
*/
+#include <linux/dma-mapping.h>
+
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
-enum s3c2410_dmasrc {
- S3C2410_DMASRC_HW, /* source is memory */
- S3C2410_DMASRC_MEM /* source is hardware */
-};
-
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
@@ -112,7 +109,7 @@
*/
extern int s3c2410_dma_devconfig(enum dma_ch channel,
- enum s3c2410_dmasrc source, unsigned long devaddr);
+ enum dma_data_direction source, unsigned long devaddr);
/* s3c2410_dma_getposition
*
@@ -126,3 +123,4 @@
extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
+#include <plat/dma-ops.h>
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 01f10e4..0fedf47 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -109,4 +109,11 @@
*/
extern void exynos4_fimd0_gpio_setup_24bpp(void);
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 9a4e53d..a181d7c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -1,11 +1,11 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C Platform - GPIO pin configuration helper definitions
+ * Samsung Platform - GPIO pin configuration helper definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -24,120 +24,30 @@
* by disabling interrupts.
*/
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int config)
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int config)
{
return (chip->config->set_config)(chip, off, config);
}
-static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
- unsigned int off)
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+ unsigned int off)
{
return (chip->config->get_config)(chip, off);
}
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
{
return (chip->config->set_pull)(chip, off, pull);
}
-static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
- unsigned int off)
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
{
return chip->config->get_pull(chip, off);
}
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- * 00 = input
- * 01 = output
- * 1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
- * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- * @sa s3c_gpio_getcfg_s3c64xx_4bit
- */
-extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to s3c_gpio_setcfg_s3c64xx_4bit().
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- */
-extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off);
-
/* Pull-{up,down} resistor controls.
*
* S3C2410,S3C2440 = Pull-UP,
@@ -147,7 +57,7 @@
*/
/**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
@@ -155,11 +65,11 @@
* This is a helper function for the case where we have GPIOs with one
* bit configuring the presence of a pull-up resistor.
*/
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
* @chip: The gpio chip that is being configured
* @off: The offset for the GPIO being configured
* @param: pull: The pull mode being requested
@@ -167,11 +77,13 @@
* This is a helper function for the case where we have GPIOs with one
* bit configuring the presence of a pull-down resistor.
*/
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
@@ -183,45 +95,46 @@
* 01 = Pull-up resistor connected
* 10 = Pull-down resistor connected
*/
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
-
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off);
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off);
/**
- * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1up.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off);
/**
- * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1down.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off);
/**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
@@ -233,19 +146,18 @@
* 10 = Pull-down resistor connected
* x1 = No pull up resistor
*/
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
* @chip: The gpio chip that the GPIO pin belongs to.
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
unsigned int off);
#endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1762dcb..d48245b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,14 +24,14 @@
#ifndef __PLAT_GPIO_CFG_H
#define __PLAT_GPIO_CFG_H __FILE__
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
/**
- * struct s3c_gpio_cfg GPIO configuration
+ * struct samsung_gpio_cfg GPIO configuration
* @cfg_eint: Configuration setting when used for external interrupt source
* @get_pull: Read the current pull configuration for the GPIO
* @set_pull: Set the current pull configuraiton for the GPIO
@@ -44,20 +44,20 @@
* per-bank configuration information that other systems such as the
* external interrupt code will need.
*
- * @sa s3c_gpio_cfgpin
+ * @sa samsung_gpio_cfgpin
* @sa s3c_gpio_getcfg
* @sa s3c_gpio_setpull
* @sa s3c_gpio_getpull
*/
-struct s3c_gpio_cfg {
+struct samsung_gpio_cfg {
unsigned int cfg_eint;
- s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
- int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
- s3c_gpio_pull_t pull);
+ samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+ int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+ samsung_gpio_pull_t pull);
- unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
- int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+ unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+ int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
unsigned config);
};
@@ -69,7 +69,7 @@
#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1))
#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x))
-#define s3c_gpio_is_cfg_special(_cfg) \
+#define samsung_gpio_is_cfg_special(_cfg) \
(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
/**
@@ -128,9 +128,9 @@
* up or down settings, and it may be dependent on the chip that is being
* used to whether the particular mode is available.
*/
-#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02)
+#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02)
/**
* s3c_gpio_setpull() - set the state of a gpio pin pull resistor
@@ -143,7 +143,7 @@
*
* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
*/
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
/**
* s3c_gpio_getpull() - get the pull resistor state of a gpio pin
@@ -151,7 +151,7 @@
*
* Read the pull resistor value for the specified pin.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
/* configure `all` aspects of an gpio */
@@ -170,7 +170,7 @@
* @sa s3c_gpio_cfgpin_range
*/
extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
- unsigned int cfg, s3c_gpio_pull_t pull);
+ unsigned int cfg, samsung_gpio_pull_t pull);
static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
unsigned int cfg)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index 8cad4cf..1fe6917 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -25,22 +25,22 @@
* specific code.
*/
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
/**
- * struct s3c_gpio_pm - power management (suspend/resume) information
+ * struct samsung_gpio_pm - power management (suspend/resume) information
* @save: Routine to save the state of the GPIO block
* @resume: Routine to resume the GPIO block.
*/
-struct s3c_gpio_pm {
- void (*save)(struct s3c_gpio_chip *chip);
- void (*resume)(struct s3c_gpio_chip *chip);
+struct samsung_gpio_pm {
+ void (*save)(struct samsung_gpio_chip *chip);
+ void (*resume)(struct samsung_gpio_chip *chip);
};
-struct s3c_gpio_cfg;
+struct samsung_gpio_cfg;
/**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @group: The group register number for gpio interrupt support.
@@ -60,10 +60,10 @@
* CPU cores trying to get one lock for different GPIO banks, where each
* bank of GPIO has its own register space and configuration registers.
*/
-struct s3c_gpio_chip {
+struct samsung_gpio_chip {
struct gpio_chip chip;
- struct s3c_gpio_cfg *config;
- struct s3c_gpio_pm *pm;
+ struct samsung_gpio_cfg *config;
+ struct samsung_gpio_pm *pm;
void __iomem *base;
int irq_base;
int group;
@@ -73,58 +73,11 @@
#endif
};
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
{
- return container_of(gpc, struct s3c_gpio_chip, chip);
+ return container_of(gpc, struct samsung_gpio_chip, chip);
}
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-/**
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips);
-extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
- int nr_chips);
-extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips);
-
-extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
-extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
-
-
/**
* samsung_gpiolib_to_irq - convert gpio pin to irq number
* @chip: The gpio chip that the pin belongs to.
@@ -136,36 +89,36 @@
extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
/* exported for core SoC support to change */
-extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
{
return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
}
#else
-/* machine specific code should provide s3c_gpiolib_getchip */
+/* machine specific code should provide samsung_gpiolib_getchip */
#include <mach/gpio-track.h>
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
#endif
#ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
#define __gpio_pm(x) x
#else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
#define __gpio_pm(x) NULL
#endif /* CONFIG_PM */
/* locking wrappers to deal with multiple access to the same gpio bank */
-#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
new file mode 100644
index 0000000..bab1392
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h
@@ -0,0 +1,98 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
+*/
+
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+ /* 1:1 mapping between cfgpin and setcfg calls at the moment */
+ s3c_gpio_cfgpin(pin, cfg);
+}
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ * < 0 = no interrupt for this pin
+ * >=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ * 1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ * width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ * 0 => enable the pull-up
+ *
+ * eg;
+ *
+ * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 56b0059..51d52e7 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -60,6 +60,7 @@
extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f674991..dcf6870 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -165,20 +165,20 @@
extern void s3c_pm_configure_extint(void);
/**
- * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
*
* Restore the state of the GPIO pins after sleep, which may involve ensuring
* that we do not glitch the state of the pins from that the bootloader's
* resume code has done.
*/
-extern void s3c_pm_restore_gpios(void);
+extern void samsung_pm_restore_gpios(void);
/**
- * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
*
- * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
*/
-extern void s3c_pm_save_gpios(void);
+extern void samsung_pm_save_gpios(void);
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
deleted file mode 100644
index bf5e2a9..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __S3C_PL330_PDATA_H
-#define __S3C_PL330_PDATA_H
-
-#include <plat/s3c-dma-pl330.h>
-
-/*
- * Every PL330 DMAC has max 32 peripheral interfaces,
- * of which some may be not be really used in your
- * DMAC's configuration.
- * Populate this array of 32 peri i/fs with relevant
- * channel IDs for used peri i/f and DMACH_MAX for
- * those unused.
- *
- * The platforms just need to provide this info
- * to the S3C DMA API driver for PL330.
- */
-struct s3c_pl330_platdata {
- enum dma_ch peri[32];
-};
-
-#endif /* __S3C_PL330_PDATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
new file mode 100644
index 0000000..3bc34f3
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/tv-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/tv.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * Samsung TV driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_PLAT_TV_H
+#define __SAMSUNG_PLAT_TV_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s5p_hdmi_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+ s5p_device_hdmi.name = name;
+#endif
+}
+
+static inline void s5p_mixer_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+ s5p_device_mixer.name = name;
+#endif
+}
+
+static inline void s5p_sdo_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+ s5p_device_sdo.name = name;
+#endif
+}
+
+#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 9652820..4be016e 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -28,13 +28,13 @@
#define OFFS_DAT (0x04)
#define OFFS_UP (0x08)
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
}
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -60,12 +60,12 @@
chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
- .save = s3c_gpio_pm_1bit_save,
- .resume = s3c_gpio_pm_1bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+ .save = samsung_gpio_pm_1bit_save,
+ .resume = samsung_gpio_pm_1bit_resume,
};
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
@@ -95,7 +95,7 @@
}
/**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
* @chip: The chip information to resume.
*
* Restore one of the GPIO banks that was saved during suspend. This is
@@ -121,7 +121,7 @@
* [1] this assumes that writing to a pin DAT whilst in SFN will set the
* state for when it is next output.
*/
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -187,13 +187,13 @@
chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
- .save = s3c_gpio_pm_2bit_save,
- .resume = s3c_gpio_pm_2bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+ .save = samsung_gpio_pm_2bit_save,
+ .resume = samsung_gpio_pm_2bit_resume,
};
#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
@@ -203,7 +203,7 @@
chip->pm_save[0] = __raw_readl(chip->base - 4);
}
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
{
u32 old, new, mask;
u32 change_mask = 0x0;
@@ -242,14 +242,14 @@
return change_mask;
}
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
{
void __iomem *con = chip->base + (index * 4);
u32 old_gpcon = __raw_readl(con);
u32 gps_gpcon = chip->pm_save[index + 1];
u32 gpcon, mask;
- mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+ mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
gpcon = old_gpcon & ~mask;
gpcon |= gps_gpcon & mask;
@@ -257,7 +257,7 @@
__raw_writel(gpcon, con);
}
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon[2];
@@ -269,10 +269,10 @@
old_gpcon[0] = 0;
old_gpcon[1] = __raw_readl(base + OFFS_CON);
- s3c_gpio_pm_4bit_con(chip, 0);
+ samsung_gpio_pm_4bit_con(chip, 0);
if (chip->chip.ngpio > 8) {
old_gpcon[0] = __raw_readl(base - 4);
- s3c_gpio_pm_4bit_con(chip, -1);
+ samsung_gpio_pm_4bit_con(chip, -1);
}
/* Now change the configurations that require DAT,CON */
@@ -298,19 +298,19 @@
old_gpdat, gps_gpdat);
}
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
- .save = s3c_gpio_pm_4bit_save,
- .resume = s3c_gpio_pm_4bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+ .save = samsung_gpio_pm_4bit_save,
+ .resume = samsung_gpio_pm_4bit_resume,
};
#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
/**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
* @ourchip: The chip for suspend.
*/
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
{
- struct s3c_gpio_pm *pm = ourchip->pm;
+ struct samsung_gpio_pm *pm = ourchip->pm;
if (pm == NULL || pm->save == NULL)
S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -319,24 +319,24 @@
}
/**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
*
* For all the GPIO banks, save the state of each one ready for going
* into a suspend mode.
*/
-void s3c_pm_save_gpios(void)
+void samsung_pm_save_gpios(void)
{
- struct s3c_gpio_chip *ourchip;
+ struct samsung_gpio_chip *ourchip;
unsigned int gpio_nr;
for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
- ourchip = s3c_gpiolib_getchip(gpio_nr);
+ ourchip = samsung_gpiolib_getchip(gpio_nr);
if (!ourchip) {
gpio_nr++;
continue;
}
- s3c_pm_save_gpio(ourchip);
+ samsung_pm_save_gpio(ourchip);
S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
ourchip->chip.label,
@@ -351,12 +351,12 @@
}
/**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
* @ourchip: The suspended chip.
*/
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
{
- struct s3c_gpio_pm *pm = ourchip->pm;
+ struct samsung_gpio_pm *pm = ourchip->pm;
if (pm == NULL || pm->resume == NULL)
S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -364,19 +364,19 @@
pm->resume(ourchip);
}
-void s3c_pm_restore_gpios(void)
+void samsung_pm_restore_gpios(void)
{
- struct s3c_gpio_chip *ourchip;
+ struct samsung_gpio_chip *ourchip;
unsigned int gpio_nr;
for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
- ourchip = s3c_gpiolib_getchip(gpio_nr);
+ ourchip = samsung_gpiolib_getchip(gpio_nr);
if (!ourchip) {
gpio_nr++;
continue;
}
- s3c_pm_resume_gpio(ourchip);
+ samsung_pm_resume_gpio(ourchip);
gpio_nr += ourchip->chip.ngpio;
gpio_nr += CONFIG_S3C_GPIO_SPACE;
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ae6f998..64ab65f 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -268,8 +268,8 @@
/* save all necessary core registers not covered by the drivers */
- s3c_pm_save_gpios();
- s3c_pm_saved_gpios();
+ samsung_pm_save_gpios();
+ samsung_pm_saved_gpios();
s3c_pm_save_uarts();
s3c_pm_save_core();
@@ -306,7 +306,7 @@
s3c_pm_restore_core();
s3c_pm_restore_uarts();
- s3c_pm_restore_gpios();
+ samsung_pm_restore_gpios();
s3c_pm_restored_gpios();
s3c_pm_debug_init();
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
new file mode 100644
index 0000000..582333c
--- /dev/null
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung S3C-DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <mach/dma.h>
+
+struct cb_data {
+ void (*fp) (void *);
+ void *fp_param;
+ unsigned ch;
+ struct list_head node;
+};
+
+static LIST_HEAD(dma_list);
+
+static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
+ int size, enum s3c2410_dma_buffresult res)
+{
+ struct cb_data *data = param;
+
+ data->fp(data->fp_param);
+}
+
+static unsigned s3c_dma_request(enum dma_ch dma_ch,
+ struct samsung_dma_info *info)
+{
+ struct cb_data *data;
+
+ if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
+ s3c2410_dma_free(dma_ch, info->client);
+ return 0;
+ }
+
+ data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
+ data->ch = dma_ch;
+ list_add_tail(&data->node, &dma_list);
+
+ s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
+
+ if (info->cap == DMA_CYCLIC)
+ s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
+
+ s3c2410_dma_config(dma_ch, info->width);
+
+ return (unsigned)dma_ch;
+}
+
+static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
+{
+ struct cb_data *data;
+
+ list_for_each_entry(data, &dma_list, node)
+ if (data->ch == ch)
+ break;
+ list_del(&data->node);
+
+ s3c2410_dma_free(ch, client);
+ kfree(data);
+
+ return 0;
+}
+
+static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
+{
+ struct cb_data *data;
+ int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
+
+ list_for_each_entry(data, &dma_list, node)
+ if (data->ch == ch)
+ break;
+
+ if (!data->fp) {
+ s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
+ data->fp = info->fp;
+ data->fp_param = info->fp_param;
+ }
+
+ s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
+
+ return 0;
+}
+
+static inline int s3c_dma_trigger(unsigned ch)
+{
+ return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
+}
+
+static inline int s3c_dma_started(unsigned ch)
+{
+ return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
+}
+
+static inline int s3c_dma_flush(unsigned ch)
+{
+ return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
+}
+
+static inline int s3c_dma_stop(unsigned ch)
+{
+ return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
+}
+
+static struct samsung_dma_ops s3c_dma_ops = {
+ .request = s3c_dma_request,
+ .release = s3c_dma_release,
+ .prepare = s3c_dma_prepare,
+ .trigger = s3c_dma_trigger,
+ .started = s3c_dma_started,
+ .flush = s3c_dma_flush,
+ .stop = s3c_dma_stop,
+};
+
+void *s3c_dma_get_ops(void)
+{
+ return &s3c_dma_ops;
+}
+EXPORT_SYMBOL(s3c_dma_get_ops);
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
deleted file mode 100644
index f85638c..0000000
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ /dev/null
@@ -1,1244 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-pl330.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/hardware/pl330.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-/**
- * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
- * @busy_chan: Number of channels currently busy.
- * @peri: List of IDs of peripherals this DMAC can work with.
- * @node: To attach to the global list of DMACs.
- * @pi: PL330 configuration info for the DMAC.
- * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
- * @clk: Pointer of DMAC operation clock.
- */
-struct s3c_pl330_dmac {
- unsigned busy_chan;
- enum dma_ch *peri;
- struct list_head node;
- struct pl330_info *pi;
- struct kmem_cache *kmcache;
- struct clk *clk;
-};
-
-/**
- * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
- * @token: Xfer ID provided by the client.
- * @node: To attach to the list of xfers on a channel.
- * @px: Xfer for PL330 core.
- * @chan: Owner channel of this xfer.
- */
-struct s3c_pl330_xfer {
- void *token;
- struct list_head node;
- struct pl330_xfer px;
- struct s3c_pl330_chan *chan;
-};
-
-/**
- * struct s3c_pl330_chan - Logical channel to communicate with
- * a Physical peripheral.
- * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
- * NULL if the channel is available to be acquired.
- * @id: ID of the peripheral that this channel can communicate with.
- * @options: Options specified by the client.
- * @sdaddr: Address provided via s3c2410_dma_devconfig.
- * @node: To attach to the global list of channels.
- * @lrq: Pointer to the last submitted pl330_req to PL330 core.
- * @xfer_list: To manage list of xfers enqueued.
- * @req: Two requests to communicate with the PL330 engine.
- * @callback_fn: Callback function to the client.
- * @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next executed.
- * @dmac: Pointer to the DMAC that manages this channel, NULL if the
- * channel is available to be acquired.
- * @client: Client of this channel. NULL if the
- * channel is available to be acquired.
- */
-struct s3c_pl330_chan {
- void *pl330_chan_id;
- enum dma_ch id;
- unsigned int options;
- unsigned long sdaddr;
- struct list_head node;
- struct pl330_req *lrq;
- struct list_head xfer_list;
- struct pl330_req req[2];
- s3c2410_dma_cbfn_t callback_fn;
- struct pl330_reqcfg rqcfg;
- struct s3c_pl330_xfer *xfer_head;
- struct s3c_pl330_dmac *dmac;
- struct s3c2410_dma_client *client;
-};
-
-/* All DMACs in the platform */
-static LIST_HEAD(dmac_list);
-
-/* All channels to peripherals in the platform */
-static LIST_HEAD(chan_list);
-
-/*
- * Since we add resources(DMACs and Channels) to the global pool,
- * we need to guard access to the resources using a global lock
- */
-static DEFINE_SPINLOCK(res_lock);
-
-/* Returns the channel with ID 'id' in the chan_list */
-static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
-{
- struct s3c_pl330_chan *ch;
-
- list_for_each_entry(ch, &chan_list, node)
- if (ch->id == id)
- return ch;
-
- return NULL;
-}
-
-/* Allocate a new channel with ID 'id' and add to chan_list */
-static void chan_add(const enum dma_ch id)
-{
- struct s3c_pl330_chan *ch = id_to_chan(id);
-
- /* Return if the channel already exists */
- if (ch)
- return;
-
- ch = kmalloc(sizeof(*ch), GFP_KERNEL);
- /* Return silently to work with other channels */
- if (!ch)
- return;
-
- ch->id = id;
- ch->dmac = NULL;
-
- list_add_tail(&ch->node, &chan_list);
-}
-
-/* If the channel is not yet acquired by any client */
-static bool chan_free(struct s3c_pl330_chan *ch)
-{
- if (!ch)
- return false;
-
- /* Channel points to some DMAC only when it's acquired */
- return ch->dmac ? false : true;
-}
-
-/*
- * Returns 0 is peripheral i/f is invalid or not present on the dmac.
- * Index + 1, otherwise.
- */
-static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
-{
- enum dma_ch *id = dmac->peri;
- int i;
-
- /* Discount invalid markers */
- if (ch_id == DMACH_MAX)
- return 0;
-
- for (i = 0; i < PL330_MAX_PERI; i++)
- if (id[i] == ch_id)
- return i + 1;
-
- return 0;
-}
-
-/* If all channel threads of the DMAC are busy */
-static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
-{
- struct pl330_info *pi = dmac->pi;
-
- return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
-}
-
-/*
- * Returns the number of free channels that
- * can be handled by this dmac only.
- */
-static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
-{
- enum dma_ch *id = dmac->peri;
- struct s3c_pl330_dmac *d;
- struct s3c_pl330_chan *ch;
- unsigned found, count = 0;
- enum dma_ch p;
- int i;
-
- for (i = 0; i < PL330_MAX_PERI; i++) {
- p = id[i];
- ch = id_to_chan(p);
-
- if (p == DMACH_MAX || !chan_free(ch))
- continue;
-
- found = 0;
- list_for_each_entry(d, &dmac_list, node) {
- if (d != dmac && iface_of_dmac(d, ch->id)) {
- found = 1;
- break;
- }
- }
- if (!found)
- count++;
- }
-
- return count;
-}
-
-/*
- * Measure of suitability of 'dmac' handling 'ch'
- *
- * 0 indicates 'dmac' can not handle 'ch' either
- * because it is not supported by the hardware or
- * because all dmac channels are currently busy.
- *
- * >0 vlaue indicates 'dmac' has the capability.
- * The bigger the value the more suitable the dmac.
- */
-#define MAX_SUIT UINT_MAX
-#define MIN_SUIT 0
-
-static unsigned suitablility(struct s3c_pl330_dmac *dmac,
- struct s3c_pl330_chan *ch)
-{
- struct pl330_info *pi = dmac->pi;
- enum dma_ch *id = dmac->peri;
- struct s3c_pl330_dmac *d;
- unsigned s;
- int i;
-
- s = MIN_SUIT;
- /* If all the DMAC channel threads are busy */
- if (dmac_busy(dmac))
- return s;
-
- for (i = 0; i < PL330_MAX_PERI; i++)
- if (id[i] == ch->id)
- break;
-
- /* If the 'dmac' can't talk to 'ch' */
- if (i == PL330_MAX_PERI)
- return s;
-
- s = MAX_SUIT;
- list_for_each_entry(d, &dmac_list, node) {
- /*
- * If some other dmac can talk to this
- * peri and has some channel free.
- */
- if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
- s = 0;
- break;
- }
- }
- if (s)
- return s;
-
- s = 100;
-
- /* Good if free chans are more, bad otherwise */
- s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
-
- return s;
-}
-
-/* More than one DMAC may have capability to transfer data with the
- * peripheral. This function assigns most suitable DMAC to manage the
- * channel and hence communicate with the peripheral.
- */
-static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
-{
- struct s3c_pl330_dmac *d, *dmac = NULL;
- unsigned sn, sl = MIN_SUIT;
-
- list_for_each_entry(d, &dmac_list, node) {
- sn = suitablility(d, ch);
-
- if (sn == MAX_SUIT)
- return d;
-
- if (sn > sl)
- dmac = d;
- }
-
- return dmac;
-}
-
-/* Acquire the channel for peripheral 'id' */
-static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
-{
- struct s3c_pl330_chan *ch = id_to_chan(id);
- struct s3c_pl330_dmac *dmac;
-
- /* If the channel doesn't exist or is already acquired */
- if (!ch || !chan_free(ch)) {
- ch = NULL;
- goto acq_exit;
- }
-
- dmac = map_chan_to_dmac(ch);
- /* If couldn't map */
- if (!dmac) {
- ch = NULL;
- goto acq_exit;
- }
-
- dmac->busy_chan++;
- ch->dmac = dmac;
-
-acq_exit:
- return ch;
-}
-
-/* Delete xfer from the queue */
-static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
-{
- struct s3c_pl330_xfer *t;
- struct s3c_pl330_chan *ch;
- int found;
-
- if (!xfer)
- return;
-
- ch = xfer->chan;
-
- /* Make sure xfer is in the queue */
- found = 0;
- list_for_each_entry(t, &ch->xfer_list, node)
- if (t == xfer) {
- found = 1;
- break;
- }
-
- if (!found)
- return;
-
- /* If xfer is last entry in the queue */
- if (xfer->node.next == &ch->xfer_list)
- t = list_entry(ch->xfer_list.next,
- struct s3c_pl330_xfer, node);
- else
- t = list_entry(xfer->node.next,
- struct s3c_pl330_xfer, node);
-
- /* If there was only one node left */
- if (t == xfer)
- ch->xfer_head = NULL;
- else if (ch->xfer_head == xfer)
- ch->xfer_head = t;
-
- list_del(&xfer->node);
-}
-
-/* Provides pointer to the next xfer in the queue.
- * If CIRCULAR option is set, the list is left intact,
- * otherwise the xfer is removed from the list.
- * Forced delete 'pluck' can be set to override the CIRCULAR option.
- */
-static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
- int pluck)
-{
- struct s3c_pl330_xfer *xfer = ch->xfer_head;
-
- if (!xfer)
- return NULL;
-
- /* If xfer is last entry in the queue */
- if (xfer->node.next == &ch->xfer_list)
- ch->xfer_head = list_entry(ch->xfer_list.next,
- struct s3c_pl330_xfer, node);
- else
- ch->xfer_head = list_entry(xfer->node.next,
- struct s3c_pl330_xfer, node);
-
- if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
- del_from_queue(xfer);
-
- return xfer;
-}
-
-static inline void add_to_queue(struct s3c_pl330_chan *ch,
- struct s3c_pl330_xfer *xfer, int front)
-{
- struct pl330_xfer *xt;
-
- /* If queue empty */
- if (ch->xfer_head == NULL)
- ch->xfer_head = xfer;
-
- xt = &ch->xfer_head->px;
- /* If the head already submitted (CIRCULAR head) */
- if (ch->options & S3C2410_DMAF_CIRCULAR &&
- (xt == ch->req[0].x || xt == ch->req[1].x))
- ch->xfer_head = xfer;
-
- /* If this is a resubmission, it should go at the head */
- if (front) {
- ch->xfer_head = xfer;
- list_add(&xfer->node, &ch->xfer_list);
- } else {
- list_add_tail(&xfer->node, &ch->xfer_list);
- }
-}
-
-static inline void _finish_off(struct s3c_pl330_xfer *xfer,
- enum s3c2410_dma_buffresult res, int ffree)
-{
- struct s3c_pl330_chan *ch;
-
- if (!xfer)
- return;
-
- ch = xfer->chan;
-
- /* Do callback */
- if (ch->callback_fn)
- ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
-
- /* Force Free or if buffer is not needed anymore */
- if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
- kmem_cache_free(ch->dmac->kmcache, xfer);
-}
-
-static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
- struct pl330_req *r)
-{
- struct s3c_pl330_xfer *xfer;
- int ret = 0;
-
- /* If already submitted */
- if (r->x)
- return 0;
-
- xfer = get_from_queue(ch, 0);
- if (xfer) {
- r->x = &xfer->px;
-
- /* Use max bandwidth for M<->M xfers */
- if (r->rqtype == MEMTOMEM) {
- struct pl330_info *pi = xfer->chan->dmac->pi;
- int burst = 1 << ch->rqcfg.brst_size;
- u32 bytes = r->x->bytes;
- int bl;
-
- bl = pi->pcfg.data_bus_width / 8;
- bl *= pi->pcfg.data_buf_dep;
- bl /= burst;
-
- /* src/dst_burst_len can't be more than 16 */
- if (bl > 16)
- bl = 16;
-
- while (bl > 1) {
- if (!(bytes % (bl * burst)))
- break;
- bl--;
- }
-
- ch->rqcfg.brst_len = bl;
- } else {
- ch->rqcfg.brst_len = 1;
- }
-
- ret = pl330_submit_req(ch->pl330_chan_id, r);
-
- /* If submission was successful */
- if (!ret) {
- ch->lrq = r; /* latest submitted req */
- return 0;
- }
-
- r->x = NULL;
-
- /* If both of the PL330 ping-pong buffers filled */
- if (ret == -EAGAIN) {
- dev_err(ch->dmac->pi->dev, "%s:%d!\n",
- __func__, __LINE__);
- /* Queue back again */
- add_to_queue(ch, xfer, 1);
- ret = 0;
- } else {
- dev_err(ch->dmac->pi->dev, "%s:%d!\n",
- __func__, __LINE__);
- _finish_off(xfer, S3C2410_RES_ERR, 0);
- }
- }
-
- return ret;
-}
-
-static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
- struct pl330_req *r, enum pl330_op_err err)
-{
- unsigned long flags;
- struct s3c_pl330_xfer *xfer;
- struct pl330_xfer *xl = r->x;
- enum s3c2410_dma_buffresult res;
-
- spin_lock_irqsave(&res_lock, flags);
-
- r->x = NULL;
-
- s3c_pl330_submit(ch, r);
-
- spin_unlock_irqrestore(&res_lock, flags);
-
- /* Map result to S3C DMA API */
- if (err == PL330_ERR_NONE)
- res = S3C2410_RES_OK;
- else if (err == PL330_ERR_ABORT)
- res = S3C2410_RES_ABORT;
- else
- res = S3C2410_RES_ERR;
-
- /* If last request had some xfer */
- if (xl) {
- xfer = container_of(xl, struct s3c_pl330_xfer, px);
- _finish_off(xfer, res, 0);
- } else {
- dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
- __func__, __LINE__);
- }
-}
-
-static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
-{
- struct pl330_req *r = token;
- struct s3c_pl330_chan *ch = container_of(r,
- struct s3c_pl330_chan, req[0]);
- s3c_pl330_rq(ch, r, err);
-}
-
-static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
-{
- struct pl330_req *r = token;
- struct s3c_pl330_chan *ch = container_of(r,
- struct s3c_pl330_chan, req[1]);
- s3c_pl330_rq(ch, r, err);
-}
-
-/* Release an acquired channel */
-static void chan_release(struct s3c_pl330_chan *ch)
-{
- struct s3c_pl330_dmac *dmac;
-
- if (chan_free(ch))
- return;
-
- dmac = ch->dmac;
- ch->dmac = NULL;
- dmac->busy_chan--;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
-{
- struct s3c_pl330_xfer *xfer;
- enum pl330_chan_op pl330op;
- struct s3c_pl330_chan *ch;
- unsigned long flags;
- int idx, ret;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- if (!ch || chan_free(ch)) {
- ret = -EINVAL;
- goto ctrl_exit;
- }
-
- switch (op) {
- case S3C2410_DMAOP_START:
- /* Make sure both reqs are enqueued */
- idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
- s3c_pl330_submit(ch, &ch->req[idx]);
- s3c_pl330_submit(ch, &ch->req[1 - idx]);
- pl330op = PL330_OP_START;
- break;
-
- case S3C2410_DMAOP_STOP:
- pl330op = PL330_OP_ABORT;
- break;
-
- case S3C2410_DMAOP_FLUSH:
- pl330op = PL330_OP_FLUSH;
- break;
-
- case S3C2410_DMAOP_PAUSE:
- case S3C2410_DMAOP_RESUME:
- case S3C2410_DMAOP_TIMEOUT:
- case S3C2410_DMAOP_STARTED:
- spin_unlock_irqrestore(&res_lock, flags);
- return 0;
-
- default:
- spin_unlock_irqrestore(&res_lock, flags);
- return -EINVAL;
- }
-
- ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
-
- if (pl330op == PL330_OP_START) {
- spin_unlock_irqrestore(&res_lock, flags);
- return ret;
- }
-
- idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
- /* Abort the current xfer */
- if (ch->req[idx].x) {
- xfer = container_of(ch->req[idx].x,
- struct s3c_pl330_xfer, px);
-
- /* Drop xfer during FLUSH */
- if (pl330op == PL330_OP_FLUSH)
- del_from_queue(xfer);
-
- ch->req[idx].x = NULL;
-
- spin_unlock_irqrestore(&res_lock, flags);
- _finish_off(xfer, S3C2410_RES_ABORT,
- pl330op == PL330_OP_FLUSH ? 1 : 0);
- spin_lock_irqsave(&res_lock, flags);
- }
-
- /* Flush the whole queue */
- if (pl330op == PL330_OP_FLUSH) {
-
- if (ch->req[1 - idx].x) {
- xfer = container_of(ch->req[1 - idx].x,
- struct s3c_pl330_xfer, px);
-
- del_from_queue(xfer);
-
- ch->req[1 - idx].x = NULL;
-
- spin_unlock_irqrestore(&res_lock, flags);
- _finish_off(xfer, S3C2410_RES_ABORT, 1);
- spin_lock_irqsave(&res_lock, flags);
- }
-
- /* Finish off the remaining in the queue */
- xfer = ch->xfer_head;
- while (xfer) {
-
- del_from_queue(xfer);
-
- spin_unlock_irqrestore(&res_lock, flags);
- _finish_off(xfer, S3C2410_RES_ABORT, 1);
- spin_lock_irqsave(&res_lock, flags);
-
- xfer = ch->xfer_head;
- }
- }
-
-ctrl_exit:
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-int s3c2410_dma_enqueue(enum dma_ch id, void *token,
- dma_addr_t addr, int size)
-{
- struct s3c_pl330_chan *ch;
- struct s3c_pl330_xfer *xfer;
- unsigned long flags;
- int idx, ret = 0;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- /* Error if invalid or free channel */
- if (!ch || chan_free(ch)) {
- ret = -EINVAL;
- goto enq_exit;
- }
-
- /* Error if size is unaligned */
- if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
- ret = -EINVAL;
- goto enq_exit;
- }
-
- xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
- if (!xfer) {
- ret = -ENOMEM;
- goto enq_exit;
- }
-
- xfer->token = token;
- xfer->chan = ch;
- xfer->px.bytes = size;
- xfer->px.next = NULL; /* Single request */
-
- /* For S3C DMA API, direction is always fixed for all xfers */
- if (ch->req[0].rqtype == MEMTODEV) {
- xfer->px.src_addr = addr;
- xfer->px.dst_addr = ch->sdaddr;
- } else {
- xfer->px.src_addr = ch->sdaddr;
- xfer->px.dst_addr = addr;
- }
-
- add_to_queue(ch, xfer, 0);
-
- /* Try submitting on either request */
- idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
- if (!ch->req[idx].x)
- s3c_pl330_submit(ch, &ch->req[idx]);
- else
- s3c_pl330_submit(ch, &ch->req[1 - idx]);
-
- spin_unlock_irqrestore(&res_lock, flags);
-
- if (ch->options & S3C2410_DMAF_AUTOSTART)
- s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
-
- return 0;
-
-enq_exit:
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-int s3c2410_dma_request(enum dma_ch id,
- struct s3c2410_dma_client *client,
- void *dev)
-{
- struct s3c_pl330_dmac *dmac;
- struct s3c_pl330_chan *ch;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = chan_acquire(id);
- if (!ch) {
- ret = -EBUSY;
- goto req_exit;
- }
-
- dmac = ch->dmac;
-
- ch->pl330_chan_id = pl330_request_channel(dmac->pi);
- if (!ch->pl330_chan_id) {
- chan_release(ch);
- ret = -EBUSY;
- goto req_exit;
- }
-
- ch->client = client;
- ch->options = 0; /* Clear any option */
- ch->callback_fn = NULL; /* Clear any callback */
- ch->lrq = NULL;
-
- ch->rqcfg.brst_size = 2; /* Default word size */
- ch->rqcfg.swap = SWAP_NO;
- ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
- ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
- ch->rqcfg.privileged = 0;
- ch->rqcfg.insnaccess = 0;
-
- /* Set invalid direction */
- ch->req[0].rqtype = DEVTODEV;
- ch->req[1].rqtype = ch->req[0].rqtype;
-
- ch->req[0].cfg = &ch->rqcfg;
- ch->req[1].cfg = ch->req[0].cfg;
-
- ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
- ch->req[1].peri = ch->req[0].peri;
-
- ch->req[0].token = &ch->req[0];
- ch->req[0].xfer_cb = s3c_pl330_rq0;
- ch->req[1].token = &ch->req[1];
- ch->req[1].xfer_cb = s3c_pl330_rq1;
-
- ch->req[0].x = NULL;
- ch->req[1].x = NULL;
-
- /* Reset xfer list */
- INIT_LIST_HEAD(&ch->xfer_list);
- ch->xfer_head = NULL;
-
-req_exit:
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
-{
- struct s3c_pl330_chan *ch;
- struct s3c_pl330_xfer *xfer;
- unsigned long flags;
- int ret = 0;
- unsigned idx;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- if (!ch || chan_free(ch))
- goto free_exit;
-
- /* Refuse if someone else wanted to free the channel */
- if (ch->client != client) {
- ret = -EBUSY;
- goto free_exit;
- }
-
- /* Stop any active xfer, Flushe the queue and do callbacks */
- pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
-
- /* Abort the submitted requests */
- idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
- if (ch->req[idx].x) {
- xfer = container_of(ch->req[idx].x,
- struct s3c_pl330_xfer, px);
-
- ch->req[idx].x = NULL;
- del_from_queue(xfer);
-
- spin_unlock_irqrestore(&res_lock, flags);
- _finish_off(xfer, S3C2410_RES_ABORT, 1);
- spin_lock_irqsave(&res_lock, flags);
- }
-
- if (ch->req[1 - idx].x) {
- xfer = container_of(ch->req[1 - idx].x,
- struct s3c_pl330_xfer, px);
-
- ch->req[1 - idx].x = NULL;
- del_from_queue(xfer);
-
- spin_unlock_irqrestore(&res_lock, flags);
- _finish_off(xfer, S3C2410_RES_ABORT, 1);
- spin_lock_irqsave(&res_lock, flags);
- }
-
- /* Pluck and Abort the queued requests in order */
- do {
- xfer = get_from_queue(ch, 1);
-
- spin_unlock_irqrestore(&res_lock, flags);
- _finish_off(xfer, S3C2410_RES_ABORT, 1);
- spin_lock_irqsave(&res_lock, flags);
- } while (xfer);
-
- ch->client = NULL;
-
- pl330_release_channel(ch->pl330_chan_id);
-
- ch->pl330_chan_id = NULL;
-
- chan_release(ch);
-
-free_exit:
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-int s3c2410_dma_config(enum dma_ch id, int xferunit)
-{
- struct s3c_pl330_chan *ch;
- struct pl330_info *pi;
- unsigned long flags;
- int i, dbwidth, ret = 0;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- if (!ch || chan_free(ch)) {
- ret = -EINVAL;
- goto cfg_exit;
- }
-
- pi = ch->dmac->pi;
- dbwidth = pi->pcfg.data_bus_width / 8;
-
- /* Max size of xfer can be pcfg.data_bus_width */
- if (xferunit > dbwidth) {
- ret = -EINVAL;
- goto cfg_exit;
- }
-
- i = 0;
- while (xferunit != (1 << i))
- i++;
-
- /* If valid value */
- if (xferunit == (1 << i))
- ch->rqcfg.brst_size = i;
- else
- ret = -EINVAL;
-
-cfg_exit:
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-/* Options that are supported by this driver */
-#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
-
-int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
-{
- struct s3c_pl330_chan *ch;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
- ret = -EINVAL;
- else
- ch->options = options;
-
- spin_unlock_irqrestore(&res_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
-{
- struct s3c_pl330_chan *ch;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- if (!ch || chan_free(ch))
- ret = -EINVAL;
- else
- ch->callback_fn = rtn;
-
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
- unsigned long address)
-{
- struct s3c_pl330_chan *ch;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&res_lock, flags);
-
- ch = id_to_chan(id);
-
- if (!ch || chan_free(ch)) {
- ret = -EINVAL;
- goto devcfg_exit;
- }
-
- switch (source) {
- case S3C2410_DMASRC_HW: /* P->M */
- ch->req[0].rqtype = DEVTOMEM;
- ch->req[1].rqtype = DEVTOMEM;
- ch->rqcfg.src_inc = 0;
- ch->rqcfg.dst_inc = 1;
- break;
- case S3C2410_DMASRC_MEM: /* M->P */
- ch->req[0].rqtype = MEMTODEV;
- ch->req[1].rqtype = MEMTODEV;
- ch->rqcfg.src_inc = 1;
- ch->rqcfg.dst_inc = 0;
- break;
- default:
- ret = -EINVAL;
- goto devcfg_exit;
- }
-
- ch->sdaddr = address;
-
-devcfg_exit:
- spin_unlock_irqrestore(&res_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
-{
- struct s3c_pl330_chan *ch = id_to_chan(id);
- struct pl330_chanstatus status;
- int ret;
-
- if (!ch || chan_free(ch))
- return -EINVAL;
-
- ret = pl330_chan_status(ch->pl330_chan_id, &status);
- if (ret < 0)
- return ret;
-
- *src = status.src_addr;
- *dst = status.dst_addr;
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-static irqreturn_t pl330_irq_handler(int irq, void *data)
-{
- if (pl330_update(data))
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
-}
-
-static int pl330_probe(struct platform_device *pdev)
-{
- struct s3c_pl330_dmac *s3c_pl330_dmac;
- struct s3c_pl330_platdata *pl330pd;
- struct pl330_info *pl330_info;
- struct resource *res;
- int i, ret, irq;
-
- pl330pd = pdev->dev.platform_data;
-
- /* Can't do without the list of _32_ peripherals */
- if (!pl330pd || !pl330pd->peri) {
- dev_err(&pdev->dev, "platform data missing!\n");
- return -ENODEV;
- }
-
- pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
- if (!pl330_info)
- return -ENOMEM;
-
- pl330_info->pl330_data = NULL;
- pl330_info->dev = &pdev->dev;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto probe_err1;
- }
-
- request_mem_region(res->start, resource_size(res), pdev->name);
-
- pl330_info->base = ioremap(res->start, resource_size(res));
- if (!pl330_info->base) {
- ret = -ENXIO;
- goto probe_err2;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- ret = irq;
- goto probe_err3;
- }
-
- ret = request_irq(irq, pl330_irq_handler, 0,
- dev_name(&pdev->dev), pl330_info);
- if (ret)
- goto probe_err4;
-
- /* Allocate a new DMAC */
- s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
- if (!s3c_pl330_dmac) {
- ret = -ENOMEM;
- goto probe_err5;
- }
-
- /* Get operation clock and enable it */
- s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
- if (IS_ERR(s3c_pl330_dmac->clk)) {
- dev_err(&pdev->dev, "Cannot get operation clock.\n");
- ret = -EINVAL;
- goto probe_err6;
- }
- clk_enable(s3c_pl330_dmac->clk);
-
- ret = pl330_add(pl330_info);
- if (ret)
- goto probe_err7;
-
- /* Hook the info */
- s3c_pl330_dmac->pi = pl330_info;
-
- /* No busy channels */
- s3c_pl330_dmac->busy_chan = 0;
-
- s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
- sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
-
- if (!s3c_pl330_dmac->kmcache) {
- ret = -ENOMEM;
- goto probe_err8;
- }
-
- /* Get the list of peripherals */
- s3c_pl330_dmac->peri = pl330pd->peri;
-
- /* Attach to the list of DMACs */
- list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
-
- /* Create a channel for each peripheral in the DMAC
- * that is, if it doesn't already exist
- */
- for (i = 0; i < PL330_MAX_PERI; i++)
- if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
- chan_add(s3c_pl330_dmac->peri[i]);
-
- printk(KERN_INFO
- "Loaded driver for PL330 DMAC-%d %s\n", pdev->id, pdev->name);
- printk(KERN_INFO
- "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
- pl330_info->pcfg.data_buf_dep,
- pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
- pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
-
- return 0;
-
-probe_err8:
- pl330_del(pl330_info);
-probe_err7:
- clk_disable(s3c_pl330_dmac->clk);
- clk_put(s3c_pl330_dmac->clk);
-probe_err6:
- kfree(s3c_pl330_dmac);
-probe_err5:
- free_irq(irq, pl330_info);
-probe_err4:
-probe_err3:
- iounmap(pl330_info->base);
-probe_err2:
- release_mem_region(res->start, resource_size(res));
-probe_err1:
- kfree(pl330_info);
-
- return ret;
-}
-
-static int pl330_remove(struct platform_device *pdev)
-{
- struct s3c_pl330_dmac *dmac, *d;
- struct s3c_pl330_chan *ch;
- unsigned long flags;
- int del, found;
-
- if (!pdev->dev.platform_data)
- return -EINVAL;
-
- spin_lock_irqsave(&res_lock, flags);
-
- found = 0;
- list_for_each_entry(d, &dmac_list, node)
- if (d->pi->dev == &pdev->dev) {
- found = 1;
- break;
- }
-
- if (!found) {
- spin_unlock_irqrestore(&res_lock, flags);
- return 0;
- }
-
- dmac = d;
-
- /* Remove all Channels that are managed only by this DMAC */
- list_for_each_entry(ch, &chan_list, node) {
-
- /* Only channels that are handled by this DMAC */
- if (iface_of_dmac(dmac, ch->id))
- del = 1;
- else
- continue;
-
- /* Don't remove if some other DMAC has it too */
- list_for_each_entry(d, &dmac_list, node)
- if (d != dmac && iface_of_dmac(d, ch->id)) {
- del = 0;
- break;
- }
-
- if (del) {
- spin_unlock_irqrestore(&res_lock, flags);
- s3c2410_dma_free(ch->id, ch->client);
- spin_lock_irqsave(&res_lock, flags);
- list_del(&ch->node);
- kfree(ch);
- }
- }
-
- /* Disable operation clock */
- clk_disable(dmac->clk);
- clk_put(dmac->clk);
-
- /* Remove the DMAC */
- list_del(&dmac->node);
- kfree(dmac);
-
- spin_unlock_irqrestore(&res_lock, flags);
-
- return 0;
-}
-
-static struct platform_driver pl330_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "s3c-pl330",
- },
- .probe = pl330_probe,
- .remove = pl330_remove,
-};
-
-static int __init pl330_init(void)
-{
- return platform_driver_register(&pl330_driver);
-}
-module_init(pl330_init);
-
-static void __exit pl330_exit(void)
-{
- platform_driver_unregister(&pl330_driver);
- return;
-}
-module_exit(pl330_exit);
-
-MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
-MODULE_LICENSE("GPL");
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 2e3b3d3..ab8f469 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -193,7 +193,8 @@
config PL330_DMA
tristate "DMA API Driver for PL330"
select DMA_ENGINE
- depends on PL330
+ depends on ARM_AMBA
+ select PL330
help
Select if your platform has one or more PL330 DMACs.
You need to provide platform specific settings via
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index be21e3f..cd8df7f 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -66,32 +66,29 @@
* after the final transfer signalled by LBREQ or LSREQ. The DMAC
* will then move to the next LLI entry.
*
- * Only the former works sanely with scatter lists, so we only implement
- * the DMAC flow control method. However, peripherals which use the LBREQ
- * and LSREQ signals (eg, MMCI) are unable to use this mode, which through
- * these hardware restrictions prevents them from using scatter DMA.
- *
* Global TODO:
* - Break out common code from arch/arm/mach-s3c64xx and share
*/
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
-
+#include <linux/slab.h>
#include <asm/hardware/pl080.h>
#define DRIVER_NAME "pl08xdmac"
+static struct amba_driver pl08x_amba_driver;
+
/**
* struct vendor_data - vendor-specific config parameters for PL08x derivatives
* @channels: the number of channels available in this variant
@@ -126,7 +123,8 @@
* @phy_chans: array of data for the physical channels
* @pool: a pool for the LLI descriptors
* @pool_ctr: counter of LLIs in the pool
- * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
+ * fetches
* @mem_buses: set to indicate memory transfers on AHB2.
* @lock: a spinlock for this struct
*/
@@ -149,14 +147,6 @@
* PL08X specific defines
*/
-/*
- * Memory boundaries: the manual for PL08x says that the controller
- * cannot read past a 1KiB boundary, so these defines are used to
- * create transfer LLIs that do not cross such boundaries.
- */
-#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */
-#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT)
-
/* Size (bytes) of each LLI buffer allocated for one transfer */
# define PL08X_LLI_TSFR_SIZE 0x2000
@@ -272,7 +262,6 @@
writel(val, ch->base + PL080_CH_CONFIG);
}
-
/*
* pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
* clears any pending interrupt status. This should not be used for
@@ -407,6 +396,7 @@
return NULL;
}
+ pm_runtime_get_sync(&pl08x->adev->dev);
return ch;
}
@@ -420,6 +410,8 @@
/* Stop the channel and clear its interrupts */
pl08x_terminate_phy_chan(pl08x, ch);
+ pm_runtime_put(&pl08x->adev->dev);
+
/* Mark it as free */
ch->serving = NULL;
spin_unlock_irqrestore(&ch->lock, flags);
@@ -499,36 +491,30 @@
};
/*
- * Autoselect a master bus to use for the transfer this prefers the
- * destination bus if both available if fixed address on one bus the
- * other will be chosen
+ * Autoselect a master bus to use for the transfer. Slave will be the chosen as
+ * victim in case src & dest are not similarly aligned. i.e. If after aligning
+ * masters address with width requirements of transfer (by sending few byte by
+ * byte data), slave is still not aligned, then its width will be reduced to
+ * BYTE.
+ * - prefers the destination bus if both available
+ * - prefers bus with fixed address (i.e. peripheral)
*/
static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
{
if (!(cctl & PL080_CONTROL_DST_INCR)) {
- *mbus = &bd->srcbus;
- *sbus = &bd->dstbus;
- } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
+ } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+ *mbus = &bd->srcbus;
+ *sbus = &bd->dstbus;
} else {
- if (bd->dstbus.buswidth == 4) {
+ if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
- } else if (bd->srcbus.buswidth == 4) {
- *mbus = &bd->srcbus;
- *sbus = &bd->dstbus;
- } else if (bd->dstbus.buswidth == 2) {
- *mbus = &bd->dstbus;
- *sbus = &bd->srcbus;
- } else if (bd->srcbus.buswidth == 2) {
- *mbus = &bd->srcbus;
- *sbus = &bd->dstbus;
} else {
- /* bd->srcbus.buswidth == 1 */
- *mbus = &bd->dstbus;
- *sbus = &bd->srcbus;
+ *mbus = &bd->srcbus;
+ *sbus = &bd->dstbus;
}
}
}
@@ -547,7 +533,8 @@
llis_va[num_llis].cctl = cctl;
llis_va[num_llis].src = bd->srcbus.addr;
llis_va[num_llis].dst = bd->dstbus.addr;
- llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
+ llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
+ sizeof(struct pl08x_lli);
llis_va[num_llis].lli |= bd->lli_bus;
if (cctl & PL080_CONTROL_SRC_INCR)
@@ -560,16 +547,12 @@
bd->remainder -= len;
}
-/*
- * Return number of bytes to fill to boundary, or len.
- * This calculation works for any value of addr.
- */
-static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
+static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
+ u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
{
- size_t boundary_len = PL08X_BOUNDARY_SIZE -
- (addr & (PL08X_BOUNDARY_SIZE - 1));
-
- return min(boundary_len, len);
+ *cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+ pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+ (*total_bytes) += len;
}
/*
@@ -583,13 +566,11 @@
struct pl08x_bus_data *mbus, *sbus;
struct pl08x_lli_build_data bd;
int num_llis = 0;
- u32 cctl;
- size_t max_bytes_per_lli;
- size_t total_bytes = 0;
+ u32 cctl, early_bytes = 0;
+ size_t max_bytes_per_lli, total_bytes = 0;
struct pl08x_lli *llis_va;
- txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
- &txd->llis_bus);
+ txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
if (!txd->llis_va) {
dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
return 0;
@@ -619,55 +600,85 @@
bd.srcbus.buswidth = bd.srcbus.maxwidth;
bd.dstbus.buswidth = bd.dstbus.maxwidth;
- /*
- * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
- */
- max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
- PL080_CONTROL_TRANSFER_SIZE_MASK;
-
/* We need to count this down to zero */
bd.remainder = txd->len;
- /*
- * Choose bus to align to
- * - prefers destination bus if both available
- * - if fixed address on one bus chooses other
- */
pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
- dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
+ dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
bd.srcbus.buswidth,
bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
bd.dstbus.buswidth,
- bd.remainder, max_bytes_per_lli);
+ bd.remainder);
dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
mbus == &bd.srcbus ? "src" : "dst",
sbus == &bd.srcbus ? "src" : "dst");
- if (txd->len < mbus->buswidth) {
- /* Less than a bus width available - send as single bytes */
- while (bd.remainder) {
- dev_vdbg(&pl08x->adev->dev,
- "%s single byte LLIs for a transfer of "
- "less than a bus width (remain 0x%08x)\n",
- __func__, bd.remainder);
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
- total_bytes++;
- }
- } else {
- /* Make one byte LLIs until master bus is aligned */
- while ((mbus->addr) % (mbus->buswidth)) {
- dev_vdbg(&pl08x->adev->dev,
- "%s adjustment lli for less than bus width "
- "(remain 0x%08x)\n",
- __func__, bd.remainder);
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
- total_bytes++;
+ /*
+ * Zero length is only allowed if all these requirements are met:
+ * - flow controller is peripheral.
+ * - src.addr is aligned to src.width
+ * - dst.addr is aligned to dst.width
+ *
+ * sg_len == 1 should be true, as there can be two cases here:
+ * - Memory addresses are contiguous and are not scattered. Here, Only
+ * one sg will be passed by user driver, with memory address and zero
+ * length. We pass this to controller and after the transfer it will
+ * receive the last burst request from peripheral and so transfer
+ * finishes.
+ *
+ * - Memory addresses are scattered and are not contiguous. Here,
+ * Obviously as DMA controller doesn't know when a lli's transfer gets
+ * over, it can't load next lli. So in this case, there has to be an
+ * assumption that only one lli is supported. Thus, we can't have
+ * scattered addresses.
+ */
+ if (!bd.remainder) {
+ u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
+ PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
+ (fc <= PL080_FLOW_SRC2DST_SRC))) {
+ dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
+ __func__);
+ return 0;
}
+ if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
+ (bd.srcbus.addr % bd.srcbus.buswidth)) {
+ dev_err(&pl08x->adev->dev,
+ "%s src & dst address must be aligned to src"
+ " & dst width if peripheral is flow controller",
+ __func__);
+ return 0;
+ }
+
+ cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+ bd.dstbus.buswidth, 0);
+ pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+ }
+
+ /*
+ * Send byte by byte for following cases
+ * - Less than a bus width available
+ * - until master bus is aligned
+ */
+ if (bd.remainder < mbus->buswidth)
+ early_bytes = bd.remainder;
+ else if ((mbus->addr) % (mbus->buswidth)) {
+ early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth);
+ if ((bd.remainder - early_bytes) < mbus->buswidth)
+ early_bytes = bd.remainder;
+ }
+
+ if (early_bytes) {
+ dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs "
+ "(remain 0x%08x)\n", __func__, bd.remainder);
+ prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
+ &total_bytes);
+ }
+
+ if (bd.remainder) {
/*
* Master now aligned
* - if slave is not then we must set its width down
@@ -680,138 +691,55 @@
sbus->buswidth = 1;
}
+ /* Bytes transferred = tsize * src width, not MIN(buswidths) */
+ max_bytes_per_lli = bd.srcbus.buswidth *
+ PL080_CONTROL_TRANSFER_SIZE_MASK;
+
/*
* Make largest possible LLIs until less than one bus
* width left
*/
while (bd.remainder > (mbus->buswidth - 1)) {
- size_t lli_len, target_len, tsize, odd_bytes;
+ size_t lli_len, tsize, width;
/*
* If enough left try to send max possible,
* otherwise try to send the remainder
*/
- target_len = min(bd.remainder, max_bytes_per_lli);
+ lli_len = min(bd.remainder, max_bytes_per_lli);
/*
- * Set bus lengths for incrementing buses to the
- * number of bytes which fill to next memory boundary,
- * limiting on the target length calculated above.
+ * Check against maximum bus alignment: Calculate actual
+ * transfer size in relation to bus width and get a
+ * maximum remainder of the highest bus width - 1
*/
- if (cctl & PL080_CONTROL_SRC_INCR)
- bd.srcbus.fill_bytes =
- pl08x_pre_boundary(bd.srcbus.addr,
- target_len);
- else
- bd.srcbus.fill_bytes = target_len;
+ width = max(mbus->buswidth, sbus->buswidth);
+ lli_len = (lli_len / width) * width;
+ tsize = lli_len / bd.srcbus.buswidth;
- if (cctl & PL080_CONTROL_DST_INCR)
- bd.dstbus.fill_bytes =
- pl08x_pre_boundary(bd.dstbus.addr,
- target_len);
- else
- bd.dstbus.fill_bytes = target_len;
+ dev_vdbg(&pl08x->adev->dev,
+ "%s fill lli with single lli chunk of "
+ "size 0x%08zx (remainder 0x%08zx)\n",
+ __func__, lli_len, bd.remainder);
- /* Find the nearest */
- lli_len = min(bd.srcbus.fill_bytes,
- bd.dstbus.fill_bytes);
-
- BUG_ON(lli_len > bd.remainder);
-
- if (lli_len <= 0) {
- dev_err(&pl08x->adev->dev,
- "%s lli_len is %zu, <= 0\n",
- __func__, lli_len);
- return 0;
- }
-
- if (lli_len == target_len) {
- /*
- * Can send what we wanted.
- * Maintain alignment
- */
- lli_len = (lli_len/mbus->buswidth) *
- mbus->buswidth;
- odd_bytes = 0;
- } else {
- /*
- * So now we know how many bytes to transfer
- * to get to the nearest boundary. The next
- * LLI will past the boundary. However, we
- * may be working to a boundary on the slave
- * bus. We need to ensure the master stays
- * aligned, and that we are working in
- * multiples of the bus widths.
- */
- odd_bytes = lli_len % mbus->buswidth;
- lli_len -= odd_bytes;
-
- }
-
- if (lli_len) {
- /*
- * Check against minimum bus alignment:
- * Calculate actual transfer size in relation
- * to bus width an get a maximum remainder of
- * the smallest bus width - 1
- */
- /* FIXME: use round_down()? */
- tsize = lli_len / min(mbus->buswidth,
- sbus->buswidth);
- lli_len = tsize * min(mbus->buswidth,
- sbus->buswidth);
-
- if (target_len != lli_len) {
- dev_vdbg(&pl08x->adev->dev,
- "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
- __func__, target_len, lli_len, txd->len);
- }
-
- cctl = pl08x_cctl_bits(cctl,
- bd.srcbus.buswidth,
- bd.dstbus.buswidth,
- tsize);
-
- dev_vdbg(&pl08x->adev->dev,
- "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
- __func__, lli_len, bd.remainder);
- pl08x_fill_lli_for_desc(&bd, num_llis++,
- lli_len, cctl);
- total_bytes += lli_len;
- }
-
-
- if (odd_bytes) {
- /*
- * Creep past the boundary, maintaining
- * master alignment
- */
- int j;
- for (j = 0; (j < mbus->buswidth)
- && (bd.remainder); j++) {
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- dev_vdbg(&pl08x->adev->dev,
- "%s align with boundary, single byte (remain 0x%08zx)\n",
- __func__, bd.remainder);
- pl08x_fill_lli_for_desc(&bd,
- num_llis++, 1, cctl);
- total_bytes++;
- }
- }
+ cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+ bd.dstbus.buswidth, tsize);
+ pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl);
+ total_bytes += lli_len;
}
/*
* Send any odd bytes
*/
- while (bd.remainder) {
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
+ if (bd.remainder) {
dev_vdbg(&pl08x->adev->dev,
- "%s align with boundary, single odd byte (remain %zu)\n",
+ "%s align with boundary, send odd bytes (remain %zu)\n",
__func__, bd.remainder);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
- total_bytes++;
+ prep_byte_width_lli(&bd, &cctl, bd.remainder,
+ num_llis++, &total_bytes);
}
}
+
if (total_bytes != txd->len) {
dev_err(&pl08x->adev->dev,
"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
@@ -917,9 +845,7 @@
* need, but for slaves the physical signals may be muxed!
* Can the platform allow us to use this channel?
*/
- if (plchan->slave &&
- ch->signal < 0 &&
- pl08x->pd->get_signal) {
+ if (plchan->slave && pl08x->pd->get_signal) {
ret = pl08x->pd->get_signal(plchan);
if (ret < 0) {
dev_dbg(&pl08x->adev->dev,
@@ -1008,10 +934,8 @@
* If slaves are relying on interrupts to signal completion this function
* must not be called with interrupts disabled.
*/
-static enum dma_status
-pl08x_dma_tx_status(struct dma_chan *chan,
- dma_cookie_t cookie,
- struct dma_tx_state *txstate)
+static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie, struct dma_tx_state *txstate)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
dma_cookie_t last_used;
@@ -1253,7 +1177,9 @@
num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
if (!num_llis) {
- kfree(txd);
+ spin_lock_irqsave(&plchan->lock, flags);
+ pl08x_free_txd(pl08x, txd);
+ spin_unlock_irqrestore(&plchan->lock, flags);
return -EINVAL;
}
@@ -1301,7 +1227,7 @@
static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
unsigned long flags)
{
- struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (txd) {
dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
@@ -1367,7 +1293,7 @@
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
- int ret;
+ int ret, tmp;
/*
* Current implementation ASSUMES only one sg
@@ -1401,12 +1327,10 @@
txd->len = sgl->length;
if (direction == DMA_TO_DEVICE) {
- txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = plchan->dst_cctl;
txd->src_addr = sgl->dma_address;
txd->dst_addr = plchan->dst_addr;
} else if (direction == DMA_FROM_DEVICE) {
- txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = plchan->src_cctl;
txd->src_addr = plchan->src_addr;
txd->dst_addr = sgl->dma_address;
@@ -1416,6 +1340,15 @@
return NULL;
}
+ if (plchan->cd->device_fc)
+ tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
+ PL080_FLOW_PER2MEM_PER;
+ else
+ tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
+ PL080_FLOW_PER2MEM;
+
+ txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
@@ -1489,9 +1422,15 @@
bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
{
- struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_dma_chan *plchan;
char *name = chan_id;
+ /* Reject channels for devices not bound to this driver */
+ if (chan->device->dev->driver != &pl08x_amba_driver.drv)
+ return false;
+
+ plchan = to_pl08x_chan(chan);
+
/* Check that the channel is not taken! */
if (!strcmp(plchan->name, name))
return true;
@@ -1507,13 +1446,7 @@
*/
static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
{
- u32 val;
-
- val = readl(pl08x->base + PL080_CONFIG);
- val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
- /* We implicitly clear bit 1 and that means little-endian mode */
- val |= PL080_CONFIG_ENABLE;
- writel(val, pl08x->base + PL080_CONFIG);
+ writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
}
static void pl08x_unmap_buffers(struct pl08x_txd *txd)
@@ -1589,8 +1522,8 @@
*/
list_for_each_entry(waiting, &pl08x->memcpy.channels,
chan.device_node) {
- if (waiting->state == PL08X_CHAN_WAITING &&
- waiting->waiting != NULL) {
+ if (waiting->state == PL08X_CHAN_WAITING &&
+ waiting->waiting != NULL) {
int ret;
/* This should REALLY not fail now */
@@ -1630,38 +1563,40 @@
static irqreturn_t pl08x_irq(int irq, void *dev)
{
struct pl08x_driver_data *pl08x = dev;
- u32 mask = 0;
- u32 val;
- int i;
+ u32 mask = 0, err, tc, i;
- val = readl(pl08x->base + PL080_ERR_STATUS);
- if (val) {
- /* An error interrupt (on one or more channels) */
- dev_err(&pl08x->adev->dev,
- "%s error interrupt, register value 0x%08x\n",
- __func__, val);
- /*
- * Simply clear ALL PL08X error interrupts,
- * regardless of channel and cause
- * FIXME: should be 0x00000003 on PL081 really.
- */
- writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+ /* check & clear - ERR & TC interrupts */
+ err = readl(pl08x->base + PL080_ERR_STATUS);
+ if (err) {
+ dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
+ __func__, err);
+ writel(err, pl08x->base + PL080_ERR_CLEAR);
}
- val = readl(pl08x->base + PL080_INT_STATUS);
+ tc = readl(pl08x->base + PL080_INT_STATUS);
+ if (tc)
+ writel(tc, pl08x->base + PL080_TC_CLEAR);
+
+ if (!err && !tc)
+ return IRQ_NONE;
+
for (i = 0; i < pl08x->vd->channels; i++) {
- if ((1 << i) & val) {
+ if (((1 << i) & err) || ((1 << i) & tc)) {
/* Locate physical channel */
struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
struct pl08x_dma_chan *plchan = phychan->serving;
+ if (!plchan) {
+ dev_err(&pl08x->adev->dev,
+ "%s Error TC interrupt on unused channel: 0x%08x\n",
+ __func__, i);
+ continue;
+ }
+
/* Schedule tasklet on this channel */
tasklet_schedule(&plchan->tasklet);
-
mask |= (1 << i);
}
}
- /* Clear only the terminal interrupts on channels we processed */
- writel(mask, pl08x->base + PL080_TC_CLEAR);
return mask ? IRQ_HANDLED : IRQ_NONE;
}
@@ -1685,9 +1620,7 @@
* Make a local wrapper to hold required data
*/
static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
- struct dma_device *dmadev,
- unsigned int channels,
- bool slave)
+ struct dma_device *dmadev, unsigned int channels, bool slave)
{
struct pl08x_dma_chan *chan;
int i;
@@ -1700,7 +1633,7 @@
* to cope with that situation.
*/
for (i = 0; i < channels; i++) {
- chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL);
+ chan = kzalloc(sizeof(*chan), GFP_KERNEL);
if (!chan) {
dev_err(&pl08x->adev->dev,
"%s no memory for channel\n", __func__);
@@ -1728,7 +1661,7 @@
kfree(chan);
continue;
}
- dev_info(&pl08x->adev->dev,
+ dev_dbg(&pl08x->adev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
@@ -1837,9 +1770,9 @@
static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
{
/* Expose a simple debugfs interface to view all clocks */
- (void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
- NULL, pl08x,
- &pl08x_debugfs_operations);
+ (void) debugfs_create_file(dev_name(&pl08x->adev->dev),
+ S_IFREG | S_IRUGO, NULL, pl08x,
+ &pl08x_debugfs_operations);
}
#else
@@ -1860,12 +1793,15 @@
return ret;
/* Create the driver state holder */
- pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL);
+ pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
if (!pl08x) {
ret = -ENOMEM;
goto out_no_pl08x;
}
+ pm_runtime_set_active(&adev->dev);
+ pm_runtime_enable(&adev->dev);
+
/* Initialize memcpy engine */
dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
pl08x->memcpy.dev = &adev->dev;
@@ -1939,7 +1875,7 @@
}
/* Initialize physical channels */
- pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)),
+ pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)),
GFP_KERNEL);
if (!pl08x->phy_chans) {
dev_err(&adev->dev, "%s failed to allocate "
@@ -1956,9 +1892,8 @@
spin_lock_init(&ch->lock);
ch->serving = NULL;
ch->signal = -1;
- dev_info(&adev->dev,
- "physical channel %d is %s\n", i,
- pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
+ dev_dbg(&adev->dev, "physical channel %d is %s\n",
+ i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
}
/* Register as many memcpy channels as there are physical channels */
@@ -1974,8 +1909,7 @@
/* Register slave channels */
ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
- pl08x->pd->num_slave_channels,
- true);
+ pl08x->pd->num_slave_channels, true);
if (ret <= 0) {
dev_warn(&pl08x->adev->dev,
"%s failed to enumerate slave channels - %d\n",
@@ -2005,6 +1939,8 @@
dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
amba_part(adev), amba_rev(adev),
(unsigned long long)adev->res.start, adev->irq[0]);
+
+ pm_runtime_put(&adev->dev);
return 0;
out_no_slave_reg:
@@ -2023,6 +1959,9 @@
dma_pool_destroy(pl08x->pool);
out_no_lli_pool:
out_no_platdata:
+ pm_runtime_put(&adev->dev);
+ pm_runtime_disable(&adev->dev);
+
kfree(pl08x);
out_no_pl08x:
amba_release_regions(adev);
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 6a483ea..3b99dc6 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -107,10 +107,11 @@
{
struct at_desc *desc, *_desc;
struct at_desc *ret = NULL;
+ unsigned long flags;
unsigned int i = 0;
LIST_HEAD(tmp_list);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
i++;
if (async_tx_test_ack(&desc->txd)) {
@@ -121,7 +122,7 @@
dev_dbg(chan2dev(&atchan->chan_common),
"desc %p not ACKed\n", desc);
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
dev_vdbg(chan2dev(&atchan->chan_common),
"scanned %u descriptors on freelist\n", i);
@@ -129,9 +130,9 @@
if (!ret) {
ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
if (ret) {
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
atchan->descs_allocated++;
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
} else {
dev_err(chan2dev(&atchan->chan_common),
"not enough descriptors available\n");
@@ -150,8 +151,9 @@
{
if (desc) {
struct at_desc *child;
+ unsigned long flags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&atchan->chan_common),
"moving child desc %p to freelist\n",
@@ -160,7 +162,7 @@
dev_vdbg(chan2dev(&atchan->chan_common),
"moving desc %p to freelist\n", desc);
list_add(&desc->desc_node, &atchan->free_list);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
}
}
@@ -299,7 +301,7 @@
/* for cyclic transfers,
* no need to replay callback function while stopping */
- if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) {
+ if (!atc_chan_is_cyclic(atchan)) {
dma_async_tx_callback callback = txd->callback;
void *param = txd->callback_param;
@@ -471,16 +473,17 @@
static void atc_tasklet(unsigned long data)
{
struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+ unsigned long flags;
- spin_lock(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status))
atc_handle_error(atchan);
- else if (test_bit(ATC_IS_CYCLIC, &atchan->status))
+ else if (atc_chan_is_cyclic(atchan))
atc_handle_cyclic(atchan);
else
atc_advance_work(atchan);
- spin_unlock(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
}
static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
@@ -539,8 +542,9 @@
struct at_desc *desc = txd_to_at_desc(tx);
struct at_dma_chan *atchan = to_at_dma_chan(tx->chan);
dma_cookie_t cookie;
+ unsigned long flags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
cookie = atc_assign_cookie(atchan, desc);
if (list_empty(&atchan->active_list)) {
@@ -554,7 +558,7 @@
list_add_tail(&desc->desc_node, &atchan->queue);
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return cookie;
}
@@ -927,28 +931,29 @@
struct at_dma_chan *atchan = to_at_dma_chan(chan);
struct at_dma *atdma = to_at_dma(chan->device);
int chan_id = atchan->chan_common.chan_id;
+ unsigned long flags;
LIST_HEAD(list);
dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd);
if (cmd == DMA_PAUSE) {
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
set_bit(ATC_IS_PAUSED, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
} else if (cmd == DMA_RESUME) {
- if (!test_bit(ATC_IS_PAUSED, &atchan->status))
+ if (!atc_chan_is_paused(atchan))
return 0;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
clear_bit(ATC_IS_PAUSED, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
} else if (cmd == DMA_TERMINATE_ALL) {
struct at_desc *desc, *_desc;
/*
@@ -957,7 +962,7 @@
* channel. We still have to poll the channel enable bit due
* to AHB/HSB limitations.
*/
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
/* disabling channel: must also remove suspend state */
dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
@@ -978,7 +983,7 @@
/* if channel dedicated to cyclic operations, free it */
clear_bit(ATC_IS_CYCLIC, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
} else {
return -ENXIO;
}
@@ -1004,9 +1009,10 @@
struct at_dma_chan *atchan = to_at_dma_chan(chan);
dma_cookie_t last_used;
dma_cookie_t last_complete;
+ unsigned long flags;
enum dma_status ret;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
last_complete = atchan->completed_cookie;
last_used = chan->cookie;
@@ -1021,7 +1027,7 @@
ret = dma_async_is_complete(cookie, last_complete, last_used);
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
if (ret != DMA_SUCCESS)
dma_set_tx_state(txstate, last_complete, last_used,
@@ -1029,7 +1035,7 @@
else
dma_set_tx_state(txstate, last_complete, last_used, 0);
- if (test_bit(ATC_IS_PAUSED, &atchan->status))
+ if (atc_chan_is_paused(atchan))
ret = DMA_PAUSED;
dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n",
@@ -1046,18 +1052,19 @@
static void atc_issue_pending(struct dma_chan *chan)
{
struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ unsigned long flags;
dev_vdbg(chan2dev(chan), "issue_pending\n");
/* Not needed for cyclic transfers */
- if (test_bit(ATC_IS_CYCLIC, &atchan->status))
+ if (atc_chan_is_cyclic(atchan))
return;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
if (!atc_chan_is_enabled(atchan)) {
atc_advance_work(atchan);
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
}
/**
@@ -1073,6 +1080,7 @@
struct at_dma *atdma = to_at_dma(chan->device);
struct at_desc *desc;
struct at_dma_slave *atslave;
+ unsigned long flags;
int i;
u32 cfg;
LIST_HEAD(tmp_list);
@@ -1116,11 +1124,11 @@
list_add_tail(&desc->desc_node, &tmp_list);
}
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
atchan->descs_allocated = i;
list_splice(&tmp_list, &atchan->free_list);
atchan->completed_cookie = chan->cookie = 1;
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
/* channel parameters */
channel_writel(atchan, CFG, cfg);
@@ -1293,15 +1301,13 @@
if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
- if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask))
+ if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
-
- if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
+ /* controller can do slave DMA: can trigger cyclic transfers */
+ dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
-
- if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ||
- dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
atdma->dma_common.device_control = atc_control;
+ }
dma_writel(atdma, EN, AT_DMA_ENABLE);
@@ -1377,27 +1383,112 @@
clk_disable(atdma->clk);
}
+static int at_dma_prepare(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+
+ list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+ device_node) {
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ /* wait for transaction completion (except in cyclic case) */
+ if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan))
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static void atc_suspend_cyclic(struct at_dma_chan *atchan)
+{
+ struct dma_chan *chan = &atchan->chan_common;
+
+ /* Channel should be paused by user
+ * do it anyway even if it is not done already */
+ if (!atc_chan_is_paused(atchan)) {
+ dev_warn(chan2dev(chan),
+ "cyclic channel not paused, should be done by channel user\n");
+ atc_control(chan, DMA_PAUSE, 0);
+ }
+
+ /* now preserve additional data for cyclic operations */
+ /* next descriptor address in the cyclic list */
+ atchan->save_dscr = channel_readl(atchan, DSCR);
+
+ vdbg_dump_regs(atchan);
+}
+
static int at_dma_suspend_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct at_dma *atdma = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
- at_dma_off(platform_get_drvdata(pdev));
+ /* preserve data */
+ list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+ device_node) {
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ if (atc_chan_is_cyclic(atchan))
+ atc_suspend_cyclic(atchan);
+ atchan->save_cfg = channel_readl(atchan, CFG);
+ }
+ atdma->save_imr = dma_readl(atdma, EBCIMR);
+
+ /* disable DMA controller */
+ at_dma_off(atdma);
clk_disable(atdma->clk);
return 0;
}
+static void atc_resume_cyclic(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ /* restore channel status for cyclic descriptors list:
+ * next descriptor in the cyclic list at the time of suspend */
+ channel_writel(atchan, SADDR, 0);
+ channel_writel(atchan, DADDR, 0);
+ channel_writel(atchan, CTRLA, 0);
+ channel_writel(atchan, CTRLB, 0);
+ channel_writel(atchan, DSCR, atchan->save_dscr);
+ dma_writel(atdma, CHER, atchan->mask);
+
+ /* channel pause status should be removed by channel user
+ * We cannot take the initiative to do it here */
+
+ vdbg_dump_regs(atchan);
+}
+
static int at_dma_resume_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct at_dma *atdma = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+ /* bring back DMA controller */
clk_enable(atdma->clk);
dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ /* restore saved data */
+ dma_writel(atdma, EBCIER, atdma->save_imr);
+ list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+ device_node) {
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ channel_writel(atchan, CFG, atchan->save_cfg);
+ if (atc_chan_is_cyclic(atchan))
+ atc_resume_cyclic(atchan);
+ }
return 0;
}
static const struct dev_pm_ops at_dma_dev_pm_ops = {
+ .prepare = at_dma_prepare,
.suspend_noirq = at_dma_suspend_noirq,
.resume_noirq = at_dma_resume_noirq,
};
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 087dbf1..aa4c9ae 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -204,6 +204,9 @@
* @status: transmit status information from irq/prep* functions
* to tasklet (use atomic operations)
* @tasklet: bottom half to finish transaction work
+ * @save_cfg: configuration register that is saved on suspend/resume cycle
+ * @save_dscr: for cyclic operations, preserve next descriptor address in
+ * the cyclic list on suspend/resume cycle
* @lock: serializes enqueue/dequeue operations to descriptors lists
* @completed_cookie: identifier for the most recently completed operation
* @active_list: list of descriptors dmaengine is being running on
@@ -218,6 +221,8 @@
u8 mask;
unsigned long status;
struct tasklet_struct tasklet;
+ u32 save_cfg;
+ u32 save_dscr;
spinlock_t lock;
@@ -248,6 +253,7 @@
* @chan_common: common dmaengine dma_device object members
* @ch_regs: memory mapped register base
* @clk: dma controller clock
+ * @save_imr: interrupt mask register that is saved on suspend/resume cycle
* @all_chan_mask: all channels availlable in a mask
* @dma_desc_pool: base of DMA descriptor region (DMA address)
* @chan: channels table to store at_dma_chan structures
@@ -256,6 +262,7 @@
struct dma_device dma_common;
void __iomem *regs;
struct clk *clk;
+ u32 save_imr;
u8 all_chan_mask;
@@ -355,6 +362,23 @@
return !!(dma_readl(atdma, CHSR) & atchan->mask);
}
+/**
+ * atc_chan_is_paused - test channel pause/resume status
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_paused(struct at_dma_chan *atchan)
+{
+ return test_bit(ATC_IS_PAUSED, &atchan->status);
+}
+
+/**
+ * atc_chan_is_cyclic - test if given channel has cyclic property set
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan)
+{
+ return test_bit(ATC_IS_CYCLIC, &atchan->status);
+}
/**
* set_desc_eol - set end-of-link to descriptor so it will end transfer
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 765f5ff..eb1d864 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -10,6 +10,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
+#include <linux/freezer.h>
#include <linux/init.h>
#include <linux/kthread.h>
#include <linux/module.h>
@@ -251,6 +252,7 @@
int i;
thread_name = current->comm;
+ set_freezable_with_signal();
ret = -ENOMEM;
@@ -305,7 +307,8 @@
dma_addr_t dma_srcs[src_cnt];
dma_addr_t dma_dsts[dst_cnt];
struct completion cmp;
- unsigned long tmo = msecs_to_jiffies(timeout);
+ unsigned long start, tmo, end = 0 /* compiler... */;
+ bool reload = true;
u8 align = 0;
total_tests++;
@@ -404,7 +407,17 @@
}
dma_async_issue_pending(chan);
- tmo = wait_for_completion_timeout(&cmp, tmo);
+ do {
+ start = jiffies;
+ if (reload)
+ end = start + msecs_to_jiffies(timeout);
+ else if (end <= start)
+ end = start + 1;
+ tmo = wait_for_completion_interruptible_timeout(&cmp,
+ end - start);
+ reload = try_to_freeze();
+ } while (tmo == -ERESTARTSYS);
+
status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
if (tmo == 0) {
@@ -477,6 +490,8 @@
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
+ /* terminate all transfers on specified channels */
+ chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
if (iterations > 0)
while (!kthread_should_stop()) {
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
@@ -499,6 +514,10 @@
list_del(&thread->node);
kfree(thread);
}
+
+ /* terminate all transfers on specified channels */
+ dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0);
+
kfree(dtc);
}
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 7bd7e98..b5cc27d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -318,6 +318,7 @@
dma_addr_t context_phys;
struct dma_device dma_device;
struct clk *clk;
+ struct mutex channel_0_lock;
struct sdma_script_start_addrs *script_addrs;
};
@@ -415,11 +416,15 @@
dma_addr_t buf_phys;
int ret;
+ mutex_lock(&sdma->channel_0_lock);
+
buf_virt = dma_alloc_coherent(NULL,
size,
&buf_phys, GFP_KERNEL);
- if (!buf_virt)
- return -ENOMEM;
+ if (!buf_virt) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
bd0->mode.command = C0_SETPM;
bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
@@ -433,6 +438,9 @@
dma_free_coherent(NULL, size, buf_virt, buf_phys);
+err_out:
+ mutex_unlock(&sdma->channel_0_lock);
+
return ret;
}
@@ -656,6 +664,8 @@
dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0);
dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1);
+ mutex_lock(&sdma->channel_0_lock);
+
memset(context, 0, sizeof(*context));
context->channel_state.pc = load_address;
@@ -676,6 +686,8 @@
ret = sdma_run_channel(&sdma->channel[0]);
+ mutex_unlock(&sdma->channel_0_lock);
+
return ret;
}
@@ -1131,18 +1143,17 @@
saddr_arr[i] = addr_arr[i];
}
-static int __init sdma_get_firmware(struct sdma_engine *sdma,
- const char *fw_name)
+static void sdma_load_firmware(const struct firmware *fw, void *context)
{
- const struct firmware *fw;
+ struct sdma_engine *sdma = context;
const struct sdma_firmware_header *header;
- int ret;
const struct sdma_script_start_addrs *addr;
unsigned short *ram_code;
- ret = request_firmware(&fw, fw_name, sdma->dev);
- if (ret)
- return ret;
+ if (!fw) {
+ dev_err(sdma->dev, "firmware not found\n");
+ return;
+ }
if (fw->size < sizeof(*header))
goto err_firmware;
@@ -1172,6 +1183,16 @@
err_firmware:
release_firmware(fw);
+}
+
+static int __init sdma_get_firmware(struct sdma_engine *sdma,
+ const char *fw_name)
+{
+ int ret;
+
+ ret = request_firmware_nowait(THIS_MODULE,
+ FW_ACTION_HOTPLUG, fw_name, sdma->dev,
+ GFP_KERNEL, sdma, sdma_load_firmware);
return ret;
}
@@ -1269,11 +1290,14 @@
struct sdma_platform_data *pdata = pdev->dev.platform_data;
int i;
struct sdma_engine *sdma;
+ s32 *saddr_arr;
sdma = kzalloc(sizeof(*sdma), GFP_KERNEL);
if (!sdma)
return -ENOMEM;
+ mutex_init(&sdma->channel_0_lock);
+
sdma->dev = &pdev->dev;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1310,6 +1334,11 @@
goto err_alloc;
}
+ /* initially no scripts available */
+ saddr_arr = (s32 *)sdma->script_addrs;
+ for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
+ saddr_arr[i] = -EINVAL;
+
if (of_id)
pdev->id_entry = of_id->data;
sdma->devtype = pdev->id_entry->driver_data;
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index be641cb..b4588bd 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -130,6 +130,23 @@
struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
};
+static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable)
+{
+ struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+ int chan_id = mxs_chan->chan.chan_id;
+ int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR;
+
+ /* enable apbh channel clock */
+ if (dma_is_apbh()) {
+ if (apbh_is_old())
+ writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
+ mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
+ else
+ writel(1 << chan_id,
+ mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
+ }
+}
+
static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
{
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
@@ -148,38 +165,21 @@
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int chan_id = mxs_chan->chan.chan_id;
+ /* clkgate needs to be enabled before writing other registers */
+ mxs_dma_clkgate(mxs_chan, 1);
+
/* set cmd_addr up */
writel(mxs_chan->ccw_phys,
mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id));
- /* enable apbh channel clock */
- if (dma_is_apbh()) {
- if (apbh_is_old())
- writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
- else
- writel(1 << chan_id,
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
- }
-
/* write 1 to SEMA to kick off the channel */
writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id));
}
static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan)
{
- struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
- int chan_id = mxs_chan->chan.chan_id;
-
/* disable apbh channel clock */
- if (dma_is_apbh()) {
- if (apbh_is_old())
- writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
- else
- writel(1 << chan_id,
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
- }
+ mxs_dma_clkgate(mxs_chan, 0);
mxs_chan->status = DMA_SUCCESS;
}
@@ -338,7 +338,10 @@
if (ret)
goto err_clk;
+ /* clkgate needs to be enabled for reset to finish */
+ mxs_dma_clkgate(mxs_chan, 1);
mxs_dma_reset_chan(mxs_chan);
+ mxs_dma_clkgate(mxs_chan, 0);
dma_async_tx_descriptor_init(&mxs_chan->desc, chan);
mxs_chan->desc.tx_submit = mxs_dma_tx_submit;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 00eee59..621134f 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -17,6 +17,8 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
+#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
#define NR_DEFAULT_DESC 16
@@ -68,6 +70,14 @@
* NULL if the channel is available to be acquired.
*/
void *pl330_chid;
+
+ /* For D-to-M and M-to-D channels */
+ int burst_sz; /* the peripheral fifo width */
+ int burst_len; /* the number of burst */
+ dma_addr_t fifo_addr;
+
+ /* for cyclic capability */
+ bool cyclic;
};
struct dma_pl330_dmac {
@@ -83,6 +93,8 @@
/* Peripheral channels connected to this DMAC */
struct dma_pl330_chan *peripherals; /* keep at end */
+
+ struct clk *clk;
};
struct dma_pl330_desc {
@@ -152,6 +164,31 @@
spin_unlock_irqrestore(&pdmac->pool_lock, flags);
}
+static inline void handle_cyclic_desc_list(struct list_head *list)
+{
+ struct dma_pl330_desc *desc;
+ struct dma_pl330_chan *pch;
+ unsigned long flags;
+
+ if (list_empty(list))
+ return;
+
+ list_for_each_entry(desc, list, node) {
+ dma_async_tx_callback callback;
+
+ /* Change status to reload it */
+ desc->status = PREP;
+ pch = desc->pchan;
+ callback = desc->txd.callback;
+ if (callback)
+ callback(desc->txd.callback_param);
+ }
+
+ spin_lock_irqsave(&pch->lock, flags);
+ list_splice_tail_init(list, &pch->work_list);
+ spin_unlock_irqrestore(&pch->lock, flags);
+}
+
static inline void fill_queue(struct dma_pl330_chan *pch)
{
struct dma_pl330_desc *desc;
@@ -205,7 +242,10 @@
spin_unlock_irqrestore(&pch->lock, flags);
- free_desc_list(&list);
+ if (pch->cyclic)
+ handle_cyclic_desc_list(&list);
+ else
+ free_desc_list(&list);
}
static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
@@ -236,6 +276,7 @@
spin_lock_irqsave(&pch->lock, flags);
pch->completed = chan->cookie = 1;
+ pch->cyclic = false;
pch->pl330_chid = pl330_request_channel(&pdmac->pif);
if (!pch->pl330_chid) {
@@ -253,25 +294,52 @@
static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
{
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_desc *desc;
+ struct dma_pl330_desc *desc, *_dt;
unsigned long flags;
+ struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct dma_slave_config *slave_config;
+ LIST_HEAD(list);
- /* Only supports DMA_TERMINATE_ALL */
- if (cmd != DMA_TERMINATE_ALL)
+ switch (cmd) {
+ case DMA_TERMINATE_ALL:
+ spin_lock_irqsave(&pch->lock, flags);
+
+ /* FLUSH the PL330 Channel thread */
+ pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
+
+ /* Mark all desc done */
+ list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
+ desc->status = DONE;
+ pch->completed = desc->txd.cookie;
+ list_move_tail(&desc->node, &list);
+ }
+
+ list_splice_tail_init(&list, &pdmac->desc_pool);
+ spin_unlock_irqrestore(&pch->lock, flags);
+ break;
+ case DMA_SLAVE_CONFIG:
+ slave_config = (struct dma_slave_config *)arg;
+
+ if (slave_config->direction == DMA_TO_DEVICE) {
+ if (slave_config->dst_addr)
+ pch->fifo_addr = slave_config->dst_addr;
+ if (slave_config->dst_addr_width)
+ pch->burst_sz = __ffs(slave_config->dst_addr_width);
+ if (slave_config->dst_maxburst)
+ pch->burst_len = slave_config->dst_maxburst;
+ } else if (slave_config->direction == DMA_FROM_DEVICE) {
+ if (slave_config->src_addr)
+ pch->fifo_addr = slave_config->src_addr;
+ if (slave_config->src_addr_width)
+ pch->burst_sz = __ffs(slave_config->src_addr_width);
+ if (slave_config->src_maxburst)
+ pch->burst_len = slave_config->src_maxburst;
+ }
+ break;
+ default:
+ dev_err(pch->dmac->pif.dev, "Not supported command.\n");
return -ENXIO;
-
- spin_lock_irqsave(&pch->lock, flags);
-
- /* FLUSH the PL330 Channel thread */
- pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
-
- /* Mark all desc done */
- list_for_each_entry(desc, &pch->work_list, node)
- desc->status = DONE;
-
- spin_unlock_irqrestore(&pch->lock, flags);
-
- pl330_tasklet((unsigned long) pch);
+ }
return 0;
}
@@ -288,6 +356,9 @@
pl330_release_channel(pch->pl330_chid);
pch->pl330_chid = NULL;
+ if (pch->cyclic)
+ list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
+
spin_unlock_irqrestore(&pch->lock, flags);
}
@@ -453,7 +524,7 @@
if (peri) {
desc->req.rqtype = peri->rqtype;
- desc->req.peri = peri->peri_id;
+ desc->req.peri = pch->chan.chan_id;
} else {
desc->req.rqtype = MEMTOMEM;
desc->req.peri = 0;
@@ -524,6 +595,51 @@
return burst_len;
}
+static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
+ struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
+ size_t period_len, enum dma_data_direction direction)
+{
+ struct dma_pl330_desc *desc;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ dma_addr_t dst;
+ dma_addr_t src;
+
+ desc = pl330_get_desc(pch);
+ if (!desc) {
+ dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ desc->rqcfg.src_inc = 1;
+ desc->rqcfg.dst_inc = 0;
+ src = dma_addr;
+ dst = pch->fifo_addr;
+ break;
+ case DMA_FROM_DEVICE:
+ desc->rqcfg.src_inc = 0;
+ desc->rqcfg.dst_inc = 1;
+ src = pch->fifo_addr;
+ dst = dma_addr;
+ break;
+ default:
+ dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ desc->rqcfg.brst_size = pch->burst_sz;
+ desc->rqcfg.brst_len = 1;
+
+ pch->cyclic = true;
+
+ fill_px(&desc->px, dst, src, period_len);
+
+ return &desc->txd;
+}
+
static struct dma_async_tx_descriptor *
pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
dma_addr_t src, size_t len, unsigned long flags)
@@ -579,7 +695,7 @@
struct dma_pl330_peri *peri = chan->private;
struct scatterlist *sg;
unsigned long flags;
- int i, burst_size;
+ int i;
dma_addr_t addr;
if (unlikely(!pch || !sgl || !sg_len || !peri))
@@ -595,8 +711,7 @@
return NULL;
}
- addr = peri->fifo_addr;
- burst_size = peri->burst_sz;
+ addr = pch->fifo_addr;
first = NULL;
@@ -644,7 +759,7 @@
sg_dma_address(sg), addr, sg_dma_len(sg));
}
- desc->rqcfg.brst_size = burst_size;
+ desc->rqcfg.brst_size = pch->burst_sz;
desc->rqcfg.brst_len = 1;
}
@@ -696,6 +811,30 @@
goto probe_err1;
}
+ pdmac->clk = clk_get(&adev->dev, "dma");
+ if (IS_ERR(pdmac->clk)) {
+ dev_err(&adev->dev, "Cannot get operation clock.\n");
+ ret = -EINVAL;
+ goto probe_err1;
+ }
+
+ amba_set_drvdata(adev, pdmac);
+
+#ifdef CONFIG_PM_RUNTIME
+ /* to use the runtime PM helper functions */
+ pm_runtime_enable(&adev->dev);
+
+ /* enable the power domain */
+ if (pm_runtime_get_sync(&adev->dev)) {
+ dev_err(&adev->dev, "failed to get runtime pm\n");
+ ret = -ENODEV;
+ goto probe_err1;
+ }
+#else
+ /* enable dma clk */
+ clk_enable(pdmac->clk);
+#endif
+
irq = adev->irq[0];
ret = request_irq(irq, pl330_irq_handler, 0,
dev_name(&adev->dev), pi);
@@ -732,6 +871,7 @@
case MEMTODEV:
case DEVTOMEM:
dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
break;
default:
dev_err(&adev->dev, "DEVTODEV Not Supported\n");
@@ -760,6 +900,7 @@
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
pd->device_free_chan_resources = pl330_free_chan_resources;
pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
+ pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
pd->device_tx_status = pl330_tx_status;
pd->device_prep_slave_sg = pl330_prep_slave_sg;
pd->device_control = pl330_control;
@@ -771,8 +912,6 @@
goto probe_err4;
}
- amba_set_drvdata(adev, pdmac);
-
dev_info(&adev->dev,
"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
dev_info(&adev->dev,
@@ -833,6 +972,13 @@
res = &adev->res;
release_mem_region(res->start, resource_size(res));
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_put(&adev->dev);
+ pm_runtime_disable(&adev->dev);
+#else
+ clk_disable(pdmac->clk);
+#endif
+
kfree(pdmac);
return 0;
@@ -846,10 +992,49 @@
{ 0, 0 },
};
+#ifdef CONFIG_PM_RUNTIME
+static int pl330_runtime_suspend(struct device *dev)
+{
+ struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
+
+ if (!pdmac) {
+ dev_err(dev, "failed to get dmac\n");
+ return -ENODEV;
+ }
+
+ clk_disable(pdmac->clk);
+
+ return 0;
+}
+
+static int pl330_runtime_resume(struct device *dev)
+{
+ struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
+
+ if (!pdmac) {
+ dev_err(dev, "failed to get dmac\n");
+ return -ENODEV;
+ }
+
+ clk_enable(pdmac->clk);
+
+ return 0;
+}
+#else
+#define pl330_runtime_suspend NULL
+#define pl330_runtime_resume NULL
+#endif /* CONFIG_PM_RUNTIME */
+
+static const struct dev_pm_ops pl330_pm_ops = {
+ .runtime_suspend = pl330_runtime_suspend,
+ .runtime_resume = pl330_runtime_resume,
+};
+
static struct amba_driver pl330_driver = {
.drv = {
.owner = THIS_MODULE,
.name = "dma-pl330",
+ .pm = &pl330_pm_ops,
},
.id_table = pl330_ids,
.probe = pl330_probe,
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd..ca44d2c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,10 +95,6 @@
depends on ARCH_EP93XX
select GPIO_GENERIC
-config GPIO_EXYNOS4
- def_bool y
- depends on CPU_EXYNOS4210
-
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
@@ -131,18 +127,6 @@
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
-config GPIO_PLAT_SAMSUNG
- def_bool y
- depends on SAMSUNG_GPIOLIB_4BIT
-
-config GPIO_S5PC100
- def_bool y
- depends on CPU_S5PC100
-
-config GPIO_S5PV210
- def_bool y
- depends on CPU_S5PV210
-
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948..62db458 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -15,7 +15,6 @@
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
-obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
@@ -38,11 +37,7 @@
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
-
-obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
-obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
-obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
-
+obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c
deleted file mode 100644
index d24b337..0000000
--- a/drivers/gpio/gpio-exynos4.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * EXYNOS4 - GPIOlib support
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- if (pull == S3C_GPIO_PULL_UP)
- pull = 3;
-
- return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- s3c_gpio_pull_t pull;
-
- pull = s3c_gpio_getpull_updown(chip, off);
- if (pull == 3)
- pull = S3C_GPIO_PULL_UP;
-
- return pull;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_exynos4,
- .get_pull = s3c_gpio_getpull_exynos4,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_exynos4,
- .get_pull = s3c_gpio_getpull_exynos4,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPA0(0),
- .ngpio = EXYNOS4_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPA1(0),
- .ngpio = EXYNOS4_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPB(0),
- .ngpio = EXYNOS4_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC0(0),
- .ngpio = EXYNOS4_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC1(0),
- .ngpio = EXYNOS4_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD0(0),
- .ngpio = EXYNOS4_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD1(0),
- .ngpio = EXYNOS4_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE0(0),
- .ngpio = EXYNOS4_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE1(0),
- .ngpio = EXYNOS4_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE2(0),
- .ngpio = EXYNOS4_GPIO_E2_NR,
- .label = "GPE2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE3(0),
- .ngpio = EXYNOS4_GPIO_E3_NR,
- .label = "GPE3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE4(0),
- .ngpio = EXYNOS4_GPIO_E4_NR,
- .label = "GPE4",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF0(0),
- .ngpio = EXYNOS4_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF1(0),
- .ngpio = EXYNOS4_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF2(0),
- .ngpio = EXYNOS4_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF3(0),
- .ngpio = EXYNOS4_GPIO_F3_NR,
- .label = "GPF3",
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPJ0(0),
- .ngpio = EXYNOS4_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPJ1(0),
- .ngpio = EXYNOS4_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK0(0),
- .ngpio = EXYNOS4_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK1(0),
- .ngpio = EXYNOS4_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK2(0),
- .ngpio = EXYNOS4_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK3(0),
- .ngpio = EXYNOS4_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL0(0),
- .ngpio = EXYNOS4_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL1(0),
- .ngpio = EXYNOS4_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL2(0),
- .ngpio = EXYNOS4_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY0(0),
- .ngpio = EXYNOS4_GPIO_Y0_NR,
- .label = "GPY0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY1(0),
- .ngpio = EXYNOS4_GPIO_Y1_NR,
- .label = "GPY1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY2(0),
- .ngpio = EXYNOS4_GPIO_Y2_NR,
- .label = "GPY2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY3(0),
- .ngpio = EXYNOS4_GPIO_Y3_NR,
- .label = "GPY3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY4(0),
- .ngpio = EXYNOS4_GPIO_Y4_NR,
- .label = "GPY4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY5(0),
- .ngpio = EXYNOS4_GPIO_Y5_NR,
- .label = "GPY5",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY6(0),
- .ngpio = EXYNOS4_GPIO_Y6_NR,
- .label = "GPY6",
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = EXYNOS4_GPX0(0),
- .ngpio = EXYNOS4_GPIO_X0_NR,
- .label = "GPX0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = EXYNOS4_GPX1(0),
- .ngpio = EXYNOS4_GPIO_X1_NR,
- .label = "GPX1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = EXYNOS4_GPX2(0),
- .ngpio = EXYNOS4_GPIO_X2_NR,
- .label = "GPX2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = EXYNOS4_GPX3(0),
- .ngpio = EXYNOS4_GPIO_X3_NR,
- .label = "GPX3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPZ(0),
- .ngpio = EXYNOS4_GPIO_Z_NR,
- .label = "GPZ",
- },
- },
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int i;
- int group = 0;
- int nr_chips;
-
- /* GPIO part 1 */
-
- chip = exynos4_gpio_part1_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO1 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
- /* GPIO part 2 */
-
- chip = exynos4_gpio_part2_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO2 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
- /* GPIO part 3 */
-
- chip = exynos4_gpio_part3_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO3 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
- s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
- return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c
deleted file mode 100644
index ef67f19..0000000
--- a/drivers/gpio/gpio-plat-samsung.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, base + GPIOCON_OFF);
-
- gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
- unsigned long dat;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, base + GPIOCON_OFF);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
-
- if (offset > 7)
- offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
- unsigned con_offset = offset;
-
- if (con_offset > 7)
- con_offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(con_offset));
- con |= 0x1 << con_4bit_shift(con_offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, regcon);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = samsung_gpiolib_4bit_input;
- chip->chip.direction_output = samsung_gpiolib_4bit_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = samsung_gpiolib_4bit2_input;
- chip->chip.direction_output = samsung_gpiolib_4bit2_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- samsung_gpiolib_add_4bit(chip);
- s3c_gpiolib_add(chip);
- }
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- samsung_gpiolib_add_4bit2(chip);
- s3c_gpiolib_add(chip);
- }
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++)
- s3c_gpiolib_add(chip);
-}
diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c
deleted file mode 100644
index 7f87b0c..0000000
--- a/drivers/gpio/gpio-s5pc100.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * S5PC100 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank GPIOs Style INT Type
- * A0 8 4Bit GPIO_INT0
- * A1 5 4Bit GPIO_INT1
- * B 8 4Bit GPIO_INT2
- * C 5 4Bit GPIO_INT3
- * D 7 4Bit GPIO_INT4
- * E0 8 4Bit GPIO_INT5
- * E1 6 4Bit GPIO_INT6
- * F0 8 4Bit GPIO_INT7
- * F1 8 4Bit GPIO_INT8
- * F2 8 4Bit GPIO_INT9
- * F3 4 4Bit GPIO_INT10
- * G0 8 4Bit GPIO_INT11
- * G1 3 4Bit GPIO_INT12
- * G2 7 4Bit GPIO_INT13
- * G3 7 4Bit GPIO_INT14
- * H0 8 4Bit WKUP_INT
- * H1 8 4Bit WKUP_INT
- * H2 8 4Bit WKUP_INT
- * H3 8 4Bit WKUP_INT
- * I 8 4Bit GPIO_INT15
- * J0 8 4Bit GPIO_INT16
- * J1 5 4Bit GPIO_INT17
- * J2 8 4Bit GPIO_INT18
- * J3 8 4Bit GPIO_INT19
- * J4 4 4Bit GPIO_INT20
- * K0 8 4Bit None
- * K1 6 4Bit None
- * K2 8 4Bit None
- * K3 8 4Bit None
- * L0 8 4Bit None
- * L1 8 4Bit None
- * L2 8 4Bit None
- * L3 8 4Bit None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
- .cfg_eint = 0xf,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
- {
- .chip = {
- .base = S5PC100_GPA0(0),
- .ngpio = S5PC100_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPA1(0),
- .ngpio = S5PC100_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPB(0),
- .ngpio = S5PC100_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PC100_GPC(0),
- .ngpio = S5PC100_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .chip = {
- .base = S5PC100_GPD(0),
- .ngpio = S5PC100_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .chip = {
- .base = S5PC100_GPE0(0),
- .ngpio = S5PC100_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPE1(0),
- .ngpio = S5PC100_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF0(0),
- .ngpio = S5PC100_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF1(0),
- .ngpio = S5PC100_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF2(0),
- .ngpio = S5PC100_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF3(0),
- .ngpio = S5PC100_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG0(0),
- .ngpio = S5PC100_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG1(0),
- .ngpio = S5PC100_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG2(0),
- .ngpio = S5PC100_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG3(0),
- .ngpio = S5PC100_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPI(0),
- .ngpio = S5PC100_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ0(0),
- .ngpio = S5PC100_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ1(0),
- .ngpio = S5PC100_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ2(0),
- .ngpio = S5PC100_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ3(0),
- .ngpio = S5PC100_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ4(0),
- .ngpio = S5PC100_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK0(0),
- .ngpio = S5PC100_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK1(0),
- .ngpio = S5PC100_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK2(0),
- .ngpio = S5PC100_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK3(0),
- .ngpio = S5PC100_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL0(0),
- .ngpio = S5PC100_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL1(0),
- .ngpio = S5PC100_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL2(0),
- .ngpio = S5PC100_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL3(0),
- .ngpio = S5PC100_GPIO_L3_NR,
- .label = "GPL3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL4(0),
- .ngpio = S5PC100_GPIO_L4_NR,
- .label = "GPL4",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PC100_GPH0(0),
- .ngpio = S5PC100_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PC100_GPH1(0),
- .ngpio = S5PC100_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PC100_GPH2(0),
- .ngpio = S5PC100_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PC100_GPH3(0),
- .ngpio = S5PC100_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
- int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
- int gpioint_group = 0;
- int i;
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- chip->group = gpioint_group++;
- }
- if (chip->base == NULL)
- chip->base = S5PC100_BANK_BASE(i);
- }
-
- samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
- return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c
deleted file mode 100644
index eb12f16..0000000
--- a/drivers/gpio/gpio-s5pv210.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * S5PV210 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
- {
- .chip = {
- .base = S5PV210_GPA0(0),
- .ngpio = S5PV210_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPA1(0),
- .ngpio = S5PV210_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPB(0),
- .ngpio = S5PV210_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC0(0),
- .ngpio = S5PV210_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC1(0),
- .ngpio = S5PV210_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD0(0),
- .ngpio = S5PV210_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD1(0),
- .ngpio = S5PV210_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE0(0),
- .ngpio = S5PV210_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE1(0),
- .ngpio = S5PV210_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF0(0),
- .ngpio = S5PV210_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF1(0),
- .ngpio = S5PV210_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF2(0),
- .ngpio = S5PV210_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF3(0),
- .ngpio = S5PV210_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG0(0),
- .ngpio = S5PV210_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG1(0),
- .ngpio = S5PV210_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG2(0),
- .ngpio = S5PV210_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG3(0),
- .ngpio = S5PV210_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_GPI(0),
- .ngpio = S5PV210_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ0(0),
- .ngpio = S5PV210_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ1(0),
- .ngpio = S5PV210_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ2(0),
- .ngpio = S5PV210_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ3(0),
- .ngpio = S5PV210_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ4(0),
- .ngpio = S5PV210_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP01(0),
- .ngpio = S5PV210_GPIO_MP01_NR,
- .label = "MP01",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP02(0),
- .ngpio = S5PV210_GPIO_MP02_NR,
- .label = "MP02",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP03(0),
- .ngpio = S5PV210_GPIO_MP03_NR,
- .label = "MP03",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP04(0),
- .ngpio = S5PV210_GPIO_MP04_NR,
- .label = "MP04",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP05(0),
- .ngpio = S5PV210_GPIO_MP05_NR,
- .label = "MP05",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PV210_GPH0(0),
- .ngpio = S5PV210_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PV210_GPH1(0),
- .ngpio = S5PV210_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PV210_GPH2(0),
- .ngpio = S5PV210_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PV210_GPH3(0),
- .ngpio = S5PV210_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
- int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
- int gpioint_group = 0;
- int i = 0;
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- chip->group = gpioint_group++;
- }
- if (chip->base == NULL)
- chip->base = S5PV210_BANK_BASE(i);
- }
-
- samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
- return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
new file mode 100644
index 0000000..b6be77a
--- /dev/null
+++ b/drivers/gpio/gpio-samsung.c
@@ -0,0 +1,2688 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/gpio-fns.h>
+#include <plat/pm.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup;
+
+ pup = __raw_readl(reg);
+ pup &= ~(3 << shift);
+ pup |= pull << shift;
+ __raw_writel(pup, reg);
+
+ return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup = __raw_readl(reg);
+
+ pup >>= shift;
+ pup &= 0x3;
+
+ return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ switch (pull) {
+ case S3C_GPIO_PULL_NONE:
+ pull = 0x01;
+ break;
+ case S3C_GPIO_PULL_UP:
+ pull = 0x00;
+ break;
+ case S3C_GPIO_PULL_DOWN:
+ pull = 0x02;
+ break;
+ }
+ return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ samsung_gpio_pull_t pull;
+
+ pull = samsung_gpio_getpull_updown(chip, off);
+
+ switch (pull) {
+ case 0x00:
+ pull = S3C_GPIO_PULL_UP;
+ break;
+ case 0x01:
+ case 0x03:
+ pull = S3C_GPIO_PULL_NONE;
+ break;
+ case 0x02:
+ pull = S3C_GPIO_PULL_DOWN;
+ break;
+ }
+
+ return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull,
+ samsung_gpio_pull_t updown)
+{
+ void __iomem *reg = chip->base + 0x08;
+ u32 pup = __raw_readl(reg);
+
+ if (pull == updown)
+ pup &= ~(1 << off);
+ else if (pull == S3C_GPIO_PULL_NONE)
+ pup |= (1 << off);
+ else
+ return -EINVAL;
+
+ __raw_writel(pup, reg);
+ return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+ unsigned int off,
+ samsung_gpio_pull_t updown)
+{
+ void __iomem *reg = chip->base + 0x08;
+ u32 pup = __raw_readl(reg);
+
+ pup &= (1 << off);
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ if (pull == S3C_GPIO_PULL_UP)
+ pull = 3;
+
+ return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ samsung_gpio_pull_t pull;
+
+ pull = samsung_gpio_getpull_updown(chip, off);
+
+ if (pull == 3)
+ pull = S3C_GPIO_PULL_UP;
+
+ return pull;
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ * 00 = input
+ * 01 = output
+ * 1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off * 2;
+ u32 con;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ if (cfg > 3)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x3 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ u32 con;
+
+ con = __raw_readl(chip->base);
+ con >>= off * 2;
+ con &= 3;
+
+ /* this conversion works for IN and OUT as well as special mode */
+ return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio > 8)
+ reg -= 4;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio > 8)
+ reg -= 4;
+
+ con = __raw_readl(reg);
+ con >>= shift;
+ con &= 0xf;
+
+ /* this conversion works for IN and OUT as well as special mode */
+ return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off;
+ u32 con;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+
+ /* Map output to 0, and SFN2 to 1 */
+ cfg -= 1;
+ if (cfg > 1)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x1 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ u32 con;
+
+ con = __raw_readl(chip->base);
+ con >>= off;
+ con &= 1;
+ con++;
+
+ return S3C_GPIO_SFN(con);
+}
+
+static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift;
+ u32 con;
+
+ switch (off) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ shift = (off & 7) * 4;
+ reg -= 4;
+ break;
+ case 6:
+ shift = ((off + 1) & 7) * 4;
+ reg -= 4;
+ default:
+ shift = ((off + 1) & 7) * 4;
+ break;
+ }
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chipcfg++) {
+ if (!chipcfg->set_config)
+ chipcfg->set_config = samsung_gpio_setcfg_4bit;
+ if (!chipcfg->get_config)
+ chipcfg->get_config = samsung_gpio_getcfg_4bit;
+ if (!chipcfg->set_pull)
+ chipcfg->set_pull = samsung_gpio_setpull_updown;
+ if (!chipcfg->get_pull)
+ chipcfg->get_pull = samsung_gpio_getpull_updown;
+ }
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+};
+
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+ .set_config = s3c24xx_gpio_setcfg_abank,
+ .get_config = s3c24xx_gpio_getcfg_abank,
+};
+
+static struct samsung_gpio_cfg exynos4_gpio_cfg = {
+ .set_pull = exynos4_gpio_setpull,
+ .get_pull = exynos4_gpio_getpull,
+ .set_config = samsung_gpio_setcfg_4bit,
+ .get_config = samsung_gpio_getcfg_4bit,
+};
+
+static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
+ .cfg_eint = 0x3,
+ .set_config = s5p64x0_gpio_setcfg_rbank,
+ .get_config = samsung_gpio_getcfg_4bit,
+ .set_pull = samsung_gpio_setpull_updown,
+ .get_pull = samsung_gpio_getpull_updown,
+};
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+ {
+ .cfg_eint = 0x0,
+ }, {
+ .cfg_eint = 0x3,
+ }, {
+ .cfg_eint = 0x7,
+ }, {
+ .cfg_eint = 0xF,
+ }, {
+ .cfg_eint = 0x0,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .cfg_eint = 0x2,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .cfg_eint = 0x3,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ },
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ * gpio n: 2 bits starting at (2*n)
+ * 00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long con;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+
+ __raw_writel(con, base + 0x00);
+
+ samsung_gpio_unlock(ourchip, flags);
+ return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= 1 << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ samsung_gpio_unlock(ourchip, flags);
+ return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + GPIOCON_OFF);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, base + GPIOCON_OFF);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned con_offset = offset;
+
+ if (con_offset > 7)
+ con_offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+ return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ dat = __raw_readl(base + 0x04);
+
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+
+ __raw_writel(dat, base + 0x04);
+
+ con &= ~(1 << offset);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+/* The next set of routines are for the case of s5p64x0 bank r */
+
+static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long flags;
+
+ switch (offset) {
+ case 6:
+ offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ offset -= 7;
+ break;
+ }
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ samsung_gpio_unlock(ourchip, flags);
+
+ return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned long flags;
+ unsigned con_offset = offset;
+
+ switch (con_offset) {
+ case 6:
+ con_offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ con_offset -= 7;
+ break;
+ }
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ samsung_gpio_unlock(ourchip, flags);
+
+ return 0;
+}
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ unsigned long val;
+
+ val = __raw_readl(ourchip->base + 0x04);
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+ unsigned int gpn;
+ int i;
+
+ gpn = chip->chip.base;
+ for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+ BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+ s3c_gpios[gpn] = chip;
+ }
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+ struct gpio_chip *gc = &chip->chip;
+ int ret;
+
+ BUG_ON(!chip->base);
+ BUG_ON(!gc->label);
+ BUG_ON(!gc->ngpio);
+
+ spin_lock_init(&chip->lock);
+
+ if (!gc->direction_input)
+ gc->direction_input = samsung_gpiolib_2bit_input;
+ if (!gc->direction_output)
+ gc->direction_output = samsung_gpiolib_2bit_output;
+ if (!gc->set)
+ gc->set = samsung_gpiolib_set;
+ if (!gc->get)
+ gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+ if (chip->pm != NULL) {
+ if (!chip->pm->save || !chip->pm->resume)
+ printk(KERN_ERR "gpio: %s has missing PM functions\n",
+ gc->label);
+ } else
+ printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
+ /* gpiochip_add() prints own failure message on error. */
+ ret = gpiochip_add(gc);
+ if (ret >= 0)
+ s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base)
+{
+ int i;
+ struct gpio_chip *gc = &chip->chip;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ if (!chip->config)
+ chip->config = &s3c24xx_gpiocfg_default;
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * 0x10);
+
+ if (!gc->direction_input)
+ gc->direction_input = samsung_gpiolib_2bit_input;
+ if (!gc->direction_output)
+ gc->direction_output = samsung_gpiolib_2bit_output;
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base,
+ unsigned int offset)
+{
+ int i;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_2bit_input;
+ chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[7];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * offset);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base)
+{
+ int i;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_4bit_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[2];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * 0x20);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[2];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = s5p64x0_gpiolib_rbank_input;
+ chip->chip.direction_output = s5p64x0_gpiolib_rbank_output;
+
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip);
+
+ return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset < 4)
+ return IRQ_EINT0 + offset;
+
+ if (offset < 8)
+ return IRQ_EINT4 + offset - 4;
+
+ return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+ {
+ .config = &s3c24xx_gpiocfg_banka,
+ .chip = {
+ .base = S3C2410_GPA(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOA",
+ .ngpio = 24,
+ .direction_input = s3c24xx_gpiolib_banka_input,
+ .direction_output = s3c24xx_gpiolib_banka_output,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPB(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOB",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPC(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOC",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPD(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOD",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPE(0),
+ .label = "GPIOE",
+ .owner = THIS_MODULE,
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPF(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOF",
+ .ngpio = 8,
+ .to_irq = s3c24xx_gpiolib_fbank_to_irq,
+ },
+ }, {
+ .irq_base = IRQ_EINT8,
+ .chip = {
+ .base = S3C2410_GPG(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOG",
+ .ngpio = 16,
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPH(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOH",
+ .ngpio = 11,
+ },
+ },
+ /* GPIOS for the S3C2443 and later devices. */
+ {
+ .base = S3C2440_GPJCON,
+ .chip = {
+ .base = S3C2410_GPJ(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOJ",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPKCON,
+ .chip = {
+ .base = S3C2410_GPK(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOK",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPLCON,
+ .chip = {
+ .base = S3C2410_GPL(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOL",
+ .ngpio = 15,
+ },
+ }, {
+ .base = S3C2443_GPMCON,
+ .chip = {
+ .base = S3C2410_GPM(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOM",
+ .ngpio = 2,
+ },
+ },
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 8 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 5 4Bit Yes 3
+ * E 5 4Bit Yes None
+ * F 16 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 16 4Bit[2] No None
+ * L 15 4Bit[2] No None
+ * M 6 4Bit No IRQ_EINT
+ * N 16 2Bit No IRQ_EINT
+ * O 16 2Bit Yes 7
+ * P 15 2Bit Yes 8
+ * Q 9 2Bit Yes 9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+ {
+ .chip = {
+ .base = S3C64XX_GPA(0),
+ .ngpio = S3C64XX_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPB(0),
+ .ngpio = S3C64XX_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPC(0),
+ .ngpio = S3C64XX_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPD(0),
+ .ngpio = S3C64XX_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = S3C64XX_GPE(0),
+ .ngpio = S3C64XX_GPIO_E_NR,
+ .label = "GPE",
+ },
+ }, {
+ .base = S3C64XX_GPG_BASE,
+ .chip = {
+ .base = S3C64XX_GPG(0),
+ .ngpio = S3C64XX_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S3C64XX_GPM_BASE,
+ .config = &samsung_gpio_cfgs[1],
+ .chip = {
+ .base = S3C64XX_GPM(0),
+ .ngpio = S3C64XX_GPIO_M_NR,
+ .label = "GPM",
+ .to_irq = s3c64xx_gpiolib_mbank_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+ {
+ .base = S3C64XX_GPH_BASE + 0x4,
+ .chip = {
+ .base = S3C64XX_GPH(0),
+ .ngpio = S3C64XX_GPIO_H_NR,
+ .label = "GPH",
+ },
+ }, {
+ .base = S3C64XX_GPK_BASE + 0x4,
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = S3C64XX_GPK(0),
+ .ngpio = S3C64XX_GPIO_K_NR,
+ .label = "GPK",
+ },
+ }, {
+ .base = S3C64XX_GPL_BASE + 0x4,
+ .config = &samsung_gpio_cfgs[1],
+ .chip = {
+ .base = S3C64XX_GPL(0),
+ .ngpio = S3C64XX_GPIO_L_NR,
+ .label = "GPL",
+ .to_irq = s3c64xx_gpiolib_lbank_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+ {
+ .base = S3C64XX_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPF(0),
+ .ngpio = S3C64XX_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[7],
+ .chip = {
+ .base = S3C64XX_GPI(0),
+ .ngpio = S3C64XX_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[7],
+ .chip = {
+ .base = S3C64XX_GPJ(0),
+ .ngpio = S3C64XX_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPO(0),
+ .ngpio = S3C64XX_GPIO_O_NR,
+ .label = "GPO",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPP(0),
+ .ngpio = S3C64XX_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPQ(0),
+ .ngpio = S3C64XX_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ }, {
+ .base = S3C64XX_GPN_BASE,
+ .irq_base = IRQ_EINT(0),
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S3C64XX_GPN(0),
+ .ngpio = S3C64XX_GPIO_N_NR,
+ .label = "GPN",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 6 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * F 2 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * N 16 2Bit No IRQ_EINT
+ * P 8 2Bit Yes 8
+ * R 15 4Bit[2] Yes 8
+ */
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .chip = {
+ .base = S5P6440_GPA(0),
+ .ngpio = S5P6440_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S5P6440_GPB(0),
+ .ngpio = S5P6440_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5P6440_GPC(0),
+ .ngpio = S5P6440_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5P64X0_GPG_BASE,
+ .chip = {
+ .base = S5P6440_GPG(0),
+ .ngpio = S5P6440_GPIO_G_NR,
+ .label = "GPG",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .base = S5P64X0_GPH_BASE + 0x4,
+ .chip = {
+ .base = S5P6440_GPH(0),
+ .ngpio = S5P6440_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .base = S5P64X0_GPR_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfg_rbank,
+ .chip = {
+ .base = S5P6440_GPR(0),
+ .ngpio = S5P6440_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .base = S5P64X0_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6440_GPF(0),
+ .ngpio = S5P6440_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P64X0_GPI_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6440_GPI(0),
+ .ngpio = S5P6440_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P64X0_GPJ_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6440_GPJ(0),
+ .ngpio = S5P6440_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P64X0_GPN_BASE,
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6440_GPN(0),
+ .ngpio = S5P6440_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P64X0_GPP_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6440_GPP(0),
+ .ngpio = S5P6440_GPIO_P_NR,
+ .label = "GPP",
+ },
+ },
+#endif
+};
+
+/*
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 6 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 8 4Bit Yes None
+ * F 2 2Bit Yes None
+ * G 14 4Bit[2] Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 5 4Bit Yes None
+ * N 16 2Bit No IRQ_EINT
+ * P 11 2Bit Yes 8
+ * Q 14 2Bit Yes None
+ * R 15 4Bit[2] Yes None
+ * S 8 2Bit Yes None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .chip = {
+ .base = S5P6450_GPA(0),
+ .ngpio = S5P6450_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S5P6450_GPB(0),
+ .ngpio = S5P6450_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5P6450_GPC(0),
+ .ngpio = S5P6450_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S5P6450_GPD(0),
+ .ngpio = S5P6450_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S5P6450_GPK_BASE,
+ .chip = {
+ .base = S5P6450_GPK(0),
+ .ngpio = S5P6450_GPIO_K_NR,
+ .label = "GPK",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .base = S5P64X0_GPG_BASE + 0x4,
+ .chip = {
+ .base = S5P6450_GPG(0),
+ .ngpio = S5P6450_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S5P64X0_GPH_BASE + 0x4,
+ .chip = {
+ .base = S5P6450_GPH(0),
+ .ngpio = S5P6450_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .base = S5P64X0_GPR_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfg_rbank,
+ .chip = {
+ .base = S5P6450_GPR(0),
+ .ngpio = S5P6450_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .base = S5P64X0_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6450_GPF(0),
+ .ngpio = S5P6450_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P64X0_GPI_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6450_GPI(0),
+ .ngpio = S5P6450_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P64X0_GPJ_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6450_GPJ(0),
+ .ngpio = S5P6450_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P64X0_GPN_BASE,
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPN(0),
+ .ngpio = S5P6450_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P64X0_GPP_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6450_GPP(0),
+ .ngpio = S5P6450_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .base = S5P6450_GPQ_BASE,
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPQ(0),
+ .ngpio = S5P6450_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ }, {
+ .base = S5P6450_GPS_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6450_GPS(0),
+ .ngpio = S5P6450_GPIO_S_NR,
+ .label = "GPS",
+ },
+ },
+#endif
+};
+
+/*
+ * S5PC100 GPIO bank summary:
+ *
+ * Bank GPIOs Style INT Type
+ * A0 8 4Bit GPIO_INT0
+ * A1 5 4Bit GPIO_INT1
+ * B 8 4Bit GPIO_INT2
+ * C 5 4Bit GPIO_INT3
+ * D 7 4Bit GPIO_INT4
+ * E0 8 4Bit GPIO_INT5
+ * E1 6 4Bit GPIO_INT6
+ * F0 8 4Bit GPIO_INT7
+ * F1 8 4Bit GPIO_INT8
+ * F2 8 4Bit GPIO_INT9
+ * F3 4 4Bit GPIO_INT10
+ * G0 8 4Bit GPIO_INT11
+ * G1 3 4Bit GPIO_INT12
+ * G2 7 4Bit GPIO_INT13
+ * G3 7 4Bit GPIO_INT14
+ * H0 8 4Bit WKUP_INT
+ * H1 8 4Bit WKUP_INT
+ * H2 8 4Bit WKUP_INT
+ * H3 8 4Bit WKUP_INT
+ * I 8 4Bit GPIO_INT15
+ * J0 8 4Bit GPIO_INT16
+ * J1 5 4Bit GPIO_INT17
+ * J2 8 4Bit GPIO_INT18
+ * J3 8 4Bit GPIO_INT19
+ * J4 4 4Bit GPIO_INT20
+ * K0 8 4Bit None
+ * K1 6 4Bit None
+ * K2 8 4Bit None
+ * K3 8 4Bit None
+ * L0 8 4Bit None
+ * L1 8 4Bit None
+ * L2 8 4Bit None
+ * L3 8 4Bit None
+ */
+
+static struct samsung_gpio_chip s5pc100_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PC100
+ {
+ .chip = {
+ .base = S5PC100_GPA0(0),
+ .ngpio = S5PC100_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPA1(0),
+ .ngpio = S5PC100_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPB(0),
+ .ngpio = S5PC100_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPC(0),
+ .ngpio = S5PC100_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPD(0),
+ .ngpio = S5PC100_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPE0(0),
+ .ngpio = S5PC100_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPE1(0),
+ .ngpio = S5PC100_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF0(0),
+ .ngpio = S5PC100_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF1(0),
+ .ngpio = S5PC100_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF2(0),
+ .ngpio = S5PC100_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF3(0),
+ .ngpio = S5PC100_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG0(0),
+ .ngpio = S5PC100_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG1(0),
+ .ngpio = S5PC100_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG2(0),
+ .ngpio = S5PC100_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG3(0),
+ .ngpio = S5PC100_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPI(0),
+ .ngpio = S5PC100_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ0(0),
+ .ngpio = S5PC100_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ1(0),
+ .ngpio = S5PC100_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ2(0),
+ .ngpio = S5PC100_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ3(0),
+ .ngpio = S5PC100_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ4(0),
+ .ngpio = S5PC100_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK0(0),
+ .ngpio = S5PC100_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK1(0),
+ .ngpio = S5PC100_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK2(0),
+ .ngpio = S5PC100_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK3(0),
+ .ngpio = S5PC100_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL0(0),
+ .ngpio = S5PC100_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL1(0),
+ .ngpio = S5PC100_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL2(0),
+ .ngpio = S5PC100_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL3(0),
+ .ngpio = S5PC100_GPIO_L3_NR,
+ .label = "GPL3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL4(0),
+ .ngpio = S5PC100_GPIO_L4_NR,
+ .label = "GPL4",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PC100_GPH0(0),
+ .ngpio = S5PC100_GPIO_H0_NR,
+ .label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PC100_GPH1(0),
+ .ngpio = S5PC100_GPIO_H1_NR,
+ .label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PC100_GPH2(0),
+ .ngpio = S5PC100_GPIO_H2_NR,
+ .label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PC100_GPH3(0),
+ .ngpio = S5PC100_GPIO_H3_NR,
+ .label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/*
+ * Followings are the gpio banks in S5PV210/S5PC110
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PV210
+ {
+ .chip = {
+ .base = S5PV210_GPA0(0),
+ .ngpio = S5PV210_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPA1(0),
+ .ngpio = S5PV210_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPB(0),
+ .ngpio = S5PV210_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC0(0),
+ .ngpio = S5PV210_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC1(0),
+ .ngpio = S5PV210_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD0(0),
+ .ngpio = S5PV210_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD1(0),
+ .ngpio = S5PV210_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE0(0),
+ .ngpio = S5PV210_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE1(0),
+ .ngpio = S5PV210_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF0(0),
+ .ngpio = S5PV210_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF1(0),
+ .ngpio = S5PV210_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF2(0),
+ .ngpio = S5PV210_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF3(0),
+ .ngpio = S5PV210_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG0(0),
+ .ngpio = S5PV210_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG1(0),
+ .ngpio = S5PV210_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG2(0),
+ .ngpio = S5PV210_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG3(0),
+ .ngpio = S5PV210_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPI(0),
+ .ngpio = S5PV210_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ0(0),
+ .ngpio = S5PV210_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ1(0),
+ .ngpio = S5PV210_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ2(0),
+ .ngpio = S5PV210_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ3(0),
+ .ngpio = S5PV210_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ4(0),
+ .ngpio = S5PV210_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP01(0),
+ .ngpio = S5PV210_GPIO_MP01_NR,
+ .label = "MP01",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP02(0),
+ .ngpio = S5PV210_GPIO_MP02_NR,
+ .label = "MP02",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP03(0),
+ .ngpio = S5PV210_GPIO_MP03_NR,
+ .label = "MP03",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP04(0),
+ .ngpio = S5PV210_GPIO_MP04_NR,
+ .label = "MP04",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP05(0),
+ .ngpio = S5PV210_GPIO_MP05_NR,
+ .label = "MP05",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PV210_GPH0(0),
+ .ngpio = S5PV210_GPIO_H0_NR,
+ .label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PV210_GPH1(0),
+ .ngpio = S5PV210_GPIO_H1_NR,
+ .label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PV210_GPH2(0),
+ .ngpio = S5PV210_GPIO_H2_NR,
+ .label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PV210_GPH3(0),
+ .ngpio = S5PV210_GPIO_H3_NR,
+ .label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/*
+ * Followings are the gpio banks in EXYNOS4210
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip exynos4_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+ {
+ .chip = {
+ .base = EXYNOS4_GPA0(0),
+ .ngpio = EXYNOS4_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPA1(0),
+ .ngpio = EXYNOS4_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPB(0),
+ .ngpio = EXYNOS4_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC0(0),
+ .ngpio = EXYNOS4_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC1(0),
+ .ngpio = EXYNOS4_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD0(0),
+ .ngpio = EXYNOS4_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD1(0),
+ .ngpio = EXYNOS4_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE0(0),
+ .ngpio = EXYNOS4_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE1(0),
+ .ngpio = EXYNOS4_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE2(0),
+ .ngpio = EXYNOS4_GPIO_E2_NR,
+ .label = "GPE2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE3(0),
+ .ngpio = EXYNOS4_GPIO_E3_NR,
+ .label = "GPE3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE4(0),
+ .ngpio = EXYNOS4_GPIO_E4_NR,
+ .label = "GPE4",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF0(0),
+ .ngpio = EXYNOS4_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF1(0),
+ .ngpio = EXYNOS4_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF2(0),
+ .ngpio = EXYNOS4_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF3(0),
+ .ngpio = EXYNOS4_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+ {
+ .chip = {
+ .base = EXYNOS4_GPJ0(0),
+ .ngpio = EXYNOS4_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPJ1(0),
+ .ngpio = EXYNOS4_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK0(0),
+ .ngpio = EXYNOS4_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK1(0),
+ .ngpio = EXYNOS4_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK2(0),
+ .ngpio = EXYNOS4_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK3(0),
+ .ngpio = EXYNOS4_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL0(0),
+ .ngpio = EXYNOS4_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL1(0),
+ .ngpio = EXYNOS4_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL2(0),
+ .ngpio = EXYNOS4_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY0(0),
+ .ngpio = EXYNOS4_GPIO_Y0_NR,
+ .label = "GPY0",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY1(0),
+ .ngpio = EXYNOS4_GPIO_Y1_NR,
+ .label = "GPY1",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY2(0),
+ .ngpio = EXYNOS4_GPIO_Y2_NR,
+ .label = "GPY2",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY3(0),
+ .ngpio = EXYNOS4_GPIO_Y3_NR,
+ .label = "GPY3",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY4(0),
+ .ngpio = EXYNOS4_GPIO_Y4_NR,
+ .label = "GPY4",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY5(0),
+ .ngpio = EXYNOS4_GPIO_Y5_NR,
+ .label = "GPY5",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = EXYNOS4_GPY6(0),
+ .ngpio = EXYNOS4_GPIO_Y6_NR,
+ .label = "GPY6",
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC00),
+ .config = &samsung_gpio_cfgs[3],
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = EXYNOS4_GPX0(0),
+ .ngpio = EXYNOS4_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC20),
+ .config = &samsung_gpio_cfgs[3],
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = EXYNOS4_GPX1(0),
+ .ngpio = EXYNOS4_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC40),
+ .config = &samsung_gpio_cfgs[3],
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = EXYNOS4_GPX2(0),
+ .ngpio = EXYNOS4_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC60),
+ .config = &samsung_gpio_cfgs[3],
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = EXYNOS4_GPX3(0),
+ .ngpio = EXYNOS4_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+ {
+ .chip = {
+ .base = EXYNOS4_GPZ(0),
+ .ngpio = EXYNOS4_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+ struct samsung_gpio_chip *chip;
+ int i, nr_chips;
+ int group = 0;
+
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+
+ if (soc_is_s3c24xx()) {
+ s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+ ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+ } else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+ ARRAY_SIZE(s3c64xx_gpios_2bit),
+ S3C64XX_VA_GPIO + 0xE0, 0x20);
+ samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+ ARRAY_SIZE(s3c64xx_gpios_4bit),
+ S3C64XX_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+ ARRAY_SIZE(s3c64xx_gpios_4bit2));
+ } else if (soc_is_s5p6440()) {
+ samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit,
+ ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0);
+ samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit,
+ ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2,
+ ARRAY_SIZE(s5p6440_gpios_4bit2));
+ s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank,
+ ARRAY_SIZE(s5p6440_gpios_rbank));
+ } else if (soc_is_s5p6450()) {
+ samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit,
+ ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0);
+ samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit,
+ ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2,
+ ARRAY_SIZE(s5p6450_gpios_4bit2));
+ s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank,
+ ARRAY_SIZE(s5p6450_gpios_rbank));
+ } else if (soc_is_s5pc100()) {
+ group = 0;
+ chip = s5pc100_gpios_4bit;
+ nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &samsung_gpio_cfgs[3];
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT)
+ s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+ } else if (soc_is_s5pv210()) {
+ group = 0;
+ chip = s5pv210_gpios_4bit;
+ nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &samsung_gpio_cfgs[3];
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
+ s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+ } else if (soc_is_exynos4210()) {
+ group = 0;
+
+ /* gpio part1 */
+ chip = exynos4_gpios_1;
+ nr_chips = ARRAY_SIZE(exynos4_gpios_1);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos4_gpio_cfg;
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+
+ /* gpio part2 */
+ chip = exynos4_gpios_2;
+ nr_chips = ARRAY_SIZE(exynos4_gpios_2);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos4_gpio_cfg;
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+
+ /* gpio part3 */
+ chip = exynos4_gpios_3;
+ nr_chips = ARRAY_SIZE(exynos4_gpios_3);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos4_gpio_cfg;
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+
+#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
+ s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+ s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+#endif
+ }
+
+ return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ int ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_setcfg(chip, offset, config);
+ samsung_gpio_unlock(chip, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, samsung_gpio_pull_t pull)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ s3c_gpio_setpull(start, pull);
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ unsigned ret = 0;
+ int offset;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_getcfg(chip, offset);
+ samsung_gpio_unlock(chip, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset, ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_setpull(chip, offset, pull);
+ samsung_gpio_unlock(chip, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ u32 pup = 0;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ pup = samsung_gpio_do_getpull(chip, offset);
+ samsung_gpio_unlock(chip, flags);
+ }
+
+ return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+/* gpiolib wrappers until these are totally eliminated */
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+ int ret;
+
+ WARN_ON(to); /* should be none of these left */
+
+ if (!to) {
+ /* if pull is enabled, try first with up, and if that
+ * fails, try using down */
+
+ ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+ if (ret)
+ s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+ } else {
+ s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+ }
+}
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+ /* do this via gpiolib until all users removed */
+
+ gpio_request(pin, "temporary");
+ gpio_set_value(pin, to);
+ gpio_free(pin);
+}
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
+
+ return __raw_readl(chip->base + 0x04) & (1 << offs);
+}
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = pin - chip->chip.base;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = drvstr >> shift;
+ drvstr &= 0x3;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = pin - chip->chip.base;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp &= ~(0x3 << shift);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+ unsigned long flags;
+ unsigned long misccr;
+
+ local_irq_save(flags);
+ misccr = __raw_readl(S3C24XX_MISCCR);
+ misccr &= ~clear;
+ misccr ^= change;
+ __raw_writel(misccr, S3C24XX_MISCCR);
+ local_irq_restore(flags);
+
+ return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index a04f87d..03cfdab 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -913,9 +913,9 @@
}
static void s3cmci_dma_setup(struct s3cmci_host *host,
- enum s3c2410_dmasrc source)
+ enum dma_data_direction source)
{
- static enum s3c2410_dmasrc last_source = -1;
+ static enum dma_data_direction last_source = -1;
static int setup_ok;
if (last_source == source)
@@ -1087,7 +1087,7 @@
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
- s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
+ s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 595dacc..019a716 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -131,6 +131,12 @@
#define RXBUSY (1<<2)
#define TXBUSY (1<<3)
+struct s3c64xx_spi_dma_data {
+ unsigned ch;
+ enum dma_data_direction direction;
+ enum dma_ch dmach;
+};
+
/**
* struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
* @clk: Pointer to the spi clock.
@@ -164,13 +170,14 @@
struct work_struct work;
struct list_head queue;
spinlock_t lock;
- enum dma_ch rx_dmach;
- enum dma_ch tx_dmach;
unsigned long sfr_start;
struct completion xfer_completion;
unsigned state;
unsigned cur_mode, cur_bpw;
unsigned cur_speed;
+ struct s3c64xx_spi_dma_data rx_dma;
+ struct s3c64xx_spi_dma_data tx_dma;
+ struct samsung_dma_ops *ops;
};
static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -226,6 +233,78 @@
writel(val, regs + S3C64XX_SPI_CH_CFG);
}
+static void s3c64xx_spi_dmacb(void *data)
+{
+ struct s3c64xx_spi_driver_data *sdd;
+ struct s3c64xx_spi_dma_data *dma = data;
+ unsigned long flags;
+
+ if (dma->direction == DMA_FROM_DEVICE)
+ sdd = container_of(data,
+ struct s3c64xx_spi_driver_data, rx_dma);
+ else
+ sdd = container_of(data,
+ struct s3c64xx_spi_driver_data, tx_dma);
+
+ spin_lock_irqsave(&sdd->lock, flags);
+
+ if (dma->direction == DMA_FROM_DEVICE) {
+ sdd->state &= ~RXBUSY;
+ if (!(sdd->state & TXBUSY))
+ complete(&sdd->xfer_completion);
+ } else {
+ sdd->state &= ~TXBUSY;
+ if (!(sdd->state & RXBUSY))
+ complete(&sdd->xfer_completion);
+ }
+
+ spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+ unsigned len, dma_addr_t buf)
+{
+ struct s3c64xx_spi_driver_data *sdd;
+ struct samsung_dma_prep_info info;
+
+ if (dma->direction == DMA_FROM_DEVICE)
+ sdd = container_of((void *)dma,
+ struct s3c64xx_spi_driver_data, rx_dma);
+ else
+ sdd = container_of((void *)dma,
+ struct s3c64xx_spi_driver_data, tx_dma);
+
+ info.cap = DMA_SLAVE;
+ info.len = len;
+ info.fp = s3c64xx_spi_dmacb;
+ info.fp_param = dma;
+ info.direction = dma->direction;
+ info.buf = buf;
+
+ sdd->ops->prepare(dma->ch, &info);
+ sdd->ops->trigger(dma->ch);
+}
+
+static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
+{
+ struct samsung_dma_info info;
+
+ sdd->ops = samsung_dma_get_ops();
+
+ info.cap = DMA_SLAVE;
+ info.client = &s3c64xx_spi_dma_client;
+ info.width = sdd->cur_bpw / 8;
+
+ info.direction = sdd->rx_dma.direction;
+ info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+ sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info);
+ info.direction = sdd->tx_dma.direction;
+ info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+ sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info);
+
+ return 1;
+}
+
static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
@@ -258,10 +337,7 @@
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
- s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
- s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
- xfer->tx_dma, xfer->len);
- s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+ prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
} else {
switch (sdd->cur_bpw) {
case 32:
@@ -293,10 +369,7 @@
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
- s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
- s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
- xfer->rx_dma, xfer->len);
- s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+ prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
}
}
@@ -482,46 +555,6 @@
}
}
-static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
- int size, enum s3c2410_dma_buffresult res)
-{
- struct s3c64xx_spi_driver_data *sdd = buf_id;
- unsigned long flags;
-
- spin_lock_irqsave(&sdd->lock, flags);
-
- if (res == S3C2410_RES_OK)
- sdd->state &= ~RXBUSY;
- else
- dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
-
- /* If the other done */
- if (!(sdd->state & TXBUSY))
- complete(&sdd->xfer_completion);
-
- spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
-static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
- int size, enum s3c2410_dma_buffresult res)
-{
- struct s3c64xx_spi_driver_data *sdd = buf_id;
- unsigned long flags;
-
- spin_lock_irqsave(&sdd->lock, flags);
-
- if (res == S3C2410_RES_OK)
- sdd->state &= ~TXBUSY;
- else
- dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
-
- /* If the other done */
- if (!(sdd->state & RXBUSY))
- complete(&sdd->xfer_completion);
-
- spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@@ -696,12 +729,10 @@
if (use_dma) {
if (xfer->tx_buf != NULL
&& (sdd->state & TXBUSY))
- s3c2410_dma_ctrl(sdd->tx_dmach,
- S3C2410_DMAOP_FLUSH);
+ sdd->ops->stop(sdd->tx_dma.ch);
if (xfer->rx_buf != NULL
&& (sdd->state & RXBUSY))
- s3c2410_dma_ctrl(sdd->rx_dmach,
- S3C2410_DMAOP_FLUSH);
+ sdd->ops->stop(sdd->rx_dma.ch);
}
goto out;
@@ -739,30 +770,6 @@
msg->complete(msg->context);
}
-static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
-{
- if (s3c2410_dma_request(sdd->rx_dmach,
- &s3c64xx_spi_dma_client, NULL) < 0) {
- dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
- return 0;
- }
- s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
- s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
- sdd->sfr_start + S3C64XX_SPI_RX_DATA);
-
- if (s3c2410_dma_request(sdd->tx_dmach,
- &s3c64xx_spi_dma_client, NULL) < 0) {
- dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
- s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
- return 0;
- }
- s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
- s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
- sdd->sfr_start + S3C64XX_SPI_TX_DATA);
-
- return 1;
-}
-
static void s3c64xx_spi_work(struct work_struct *work)
{
struct s3c64xx_spi_driver_data *sdd = container_of(work,
@@ -799,8 +806,8 @@
spin_unlock_irqrestore(&sdd->lock, flags);
/* Free DMA channels */
- s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
- s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+ sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
+ sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
}
static int s3c64xx_spi_transfer(struct spi_device *spi,
@@ -1017,8 +1024,10 @@
sdd->cntrlr_info = sci;
sdd->pdev = pdev;
sdd->sfr_start = mem_res->start;
- sdd->tx_dmach = dmatx_res->start;
- sdd->rx_dmach = dmarx_res->start;
+ sdd->tx_dma.dmach = dmatx_res->start;
+ sdd->tx_dma.direction = DMA_TO_DEVICE;
+ sdd->rx_dma.dmach = dmarx_res->start;
+ sdd->rx_dma.direction = DMA_FROM_DEVICE;
sdd->cur_bpw = 8;
@@ -1106,7 +1115,7 @@
pdev->id, master->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
- sdd->rx_dmach, sdd->tx_dmach);
+ sdd->rx_dma.dmach, sdd->tx_dma.dmach);
return 0;
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index e6e28f3..a22662c 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -47,6 +47,9 @@
* @muxval: a number usually used to poke into some mux regiser to
* mux in the signal to this channel
* @cctl_opt: default options for the channel control register
+ * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
+ * channels. Fill with 'true' if peripheral should be flow controller. Direction
+ * will be selected at Runtime.
* @addr: source/target address in physical memory for this DMA channel,
* can be the address of a FIFO register for burst requests for example.
* This can be left undefined if the PrimeCell API is used for configuring
@@ -65,6 +68,7 @@
int max_signal;
u32 muxval;
u32 cctl;
+ bool device_fc;
dma_addr_t addr;
bool circular_buffer;
bool single;
@@ -77,13 +81,11 @@
* @addr: current address
* @maxwidth: the maximum width of a transfer on this bus
* @buswidth: the width of this bus in bytes: 1, 2 or 4
- * @fill_bytes: bytes required to fill to the next bus memory boundary
*/
struct pl08x_bus_data {
dma_addr_t addr;
u8 maxwidth;
u8 buswidth;
- size_t fill_bytes;
};
/**
@@ -105,8 +107,16 @@
/**
* struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @tx: async tx descriptor
+ * @node: node for txd list for channels
+ * @src_addr: src address of txd
+ * @dst_addr: dst address of txd
+ * @len: transfer len in bytes
+ * @direction: direction of transfer
* @llis_bus: DMA memory address (physical) start for the LLIs
* @llis_va: virtual memory address start for the LLIs
+ * @cctl: control reg values for current txd
+ * @ccfg: config reg values for current txd
*/
struct pl08x_txd {
struct dma_async_tx_descriptor tx;
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index cbee7de..d12f077 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -19,12 +19,8 @@
* Peri_Req i/f of the DMAC that is
* peripheral could be reached from.
*/
- u8 peri_id; /* {0, 31} */
+ u8 peri_id; /* specific dma id */
enum pl330_reqtype rqtype;
-
- /* For M->D and D->M Channels */
- int burst_sz; /* in power of 2 */
- dma_addr_t fifo_addr;
};
struct dma_pl330_platdata {
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8fbf40e..ace51af 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -24,8 +24,7 @@
#include <linux/device.h>
#include <linux/uio.h>
#include <linux/dma-direction.h>
-
-struct scatterlist;
+#include <linux/scatterlist.h>
/**
* typedef dma_cookie_t - an opaque DMA cookie
@@ -519,6 +518,16 @@
(unsigned long)config);
}
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
+ struct dma_chan *chan, void *buf, size_t len,
+ enum dma_data_direction dir, unsigned long flags)
+{
+ struct scatterlist sg;
+ sg_init_one(&sg, buf, len);
+
+ return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags);
+}
+
static inline int dmaengine_terminate_all(struct dma_chan *chan)
{
return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
index f97110e..b4f9b00 100644
--- a/sound/soc/samsung/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -271,7 +271,10 @@
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+ if (!dma_data->ops)
+ dma_data->ops = samsung_dma_get_ops();
+
+ dma_data->ops->started(dma_data->channel);
return 0;
}
@@ -317,7 +320,10 @@
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+ if (!dma_data->ops)
+ dma_data->ops = samsung_dma_get_ops();
+
+ dma_data->ops->started(dma_data->channel);
return 0;
}
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index 9465588..2d622b6 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -54,7 +54,6 @@
spinlock_t lock;
int state;
unsigned int dma_loaded;
- unsigned int dma_limit;
unsigned int dma_period;
dma_addr_t dma_start;
dma_addr_t dma_pos;
@@ -62,77 +61,79 @@
struct s3c_dma_params *params;
};
+static void audio_buffdone(void *data);
+
/* dma_enqueue
*
* place a dma buffer onto the queue for the dma system
* to handle.
-*/
+ */
static void dma_enqueue(struct snd_pcm_substream *substream)
{
struct runtime_data *prtd = substream->runtime->private_data;
dma_addr_t pos = prtd->dma_pos;
unsigned int limit;
- int ret;
+ struct samsung_dma_prep_info dma_info;
pr_debug("Entered %s\n", __func__);
- if (s3c_dma_has_circular())
- limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
- else
- limit = prtd->dma_limit;
+ limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
pr_debug("%s: loaded %d, limit %d\n",
__func__, prtd->dma_loaded, limit);
- while (prtd->dma_loaded < limit) {
- unsigned long len = prtd->dma_period;
+ dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
+ dma_info.direction =
+ (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ dma_info.fp = audio_buffdone;
+ dma_info.fp_param = substream;
+ dma_info.period = prtd->dma_period;
+ dma_info.len = prtd->dma_period*limit;
+ while (prtd->dma_loaded < limit) {
pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
- if ((pos + len) > prtd->dma_end) {
- len = prtd->dma_end - pos;
- pr_debug("%s: corrected dma len %ld\n", __func__, len);
+ if ((pos + dma_info.period) > prtd->dma_end) {
+ dma_info.period = prtd->dma_end - pos;
+ pr_debug("%s: corrected dma len %ld\n",
+ __func__, dma_info.period);
}
- ret = s3c2410_dma_enqueue(prtd->params->channel,
- substream, pos, len);
+ dma_info.buf = pos;
+ prtd->params->ops->prepare(prtd->params->ch, &dma_info);
- if (ret == 0) {
- prtd->dma_loaded++;
- pos += prtd->dma_period;
- if (pos >= prtd->dma_end)
- pos = prtd->dma_start;
- } else
- break;
+ prtd->dma_loaded++;
+ pos += prtd->dma_period;
+ if (pos >= prtd->dma_end)
+ pos = prtd->dma_start;
}
prtd->dma_pos = pos;
}
-static void audio_buffdone(struct s3c2410_dma_chan *channel,
- void *dev_id, int size,
- enum s3c2410_dma_buffresult result)
+static void audio_buffdone(void *data)
{
- struct snd_pcm_substream *substream = dev_id;
- struct runtime_data *prtd;
+ struct snd_pcm_substream *substream = data;
+ struct runtime_data *prtd = substream->runtime->private_data;
pr_debug("Entered %s\n", __func__);
- if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
- return;
+ if (prtd->state & ST_RUNNING) {
+ prtd->dma_pos += prtd->dma_period;
+ if (prtd->dma_pos >= prtd->dma_end)
+ prtd->dma_pos = prtd->dma_start;
- prtd = substream->runtime->private_data;
+ if (substream)
+ snd_pcm_period_elapsed(substream);
- if (substream)
- snd_pcm_period_elapsed(substream);
-
- spin_lock(&prtd->lock);
- if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
- prtd->dma_loaded--;
- dma_enqueue(substream);
+ spin_lock(&prtd->lock);
+ if (!samsung_dma_has_circular()) {
+ prtd->dma_loaded--;
+ dma_enqueue(substream);
+ }
+ spin_unlock(&prtd->lock);
}
-
- spin_unlock(&prtd->lock);
}
static int dma_hw_params(struct snd_pcm_substream *substream,
@@ -144,8 +145,7 @@
unsigned long totbytes = params_buffer_bytes(params);
struct s3c_dma_params *dma =
snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- int ret = 0;
-
+ struct samsung_dma_info dma_info;
pr_debug("Entered %s\n", __func__);
@@ -163,30 +163,26 @@
pr_debug("params %p, client %p, channel %d\n", prtd->params,
prtd->params->client, prtd->params->channel);
- ret = s3c2410_dma_request(prtd->params->channel,
- prtd->params->client, NULL);
+ prtd->params->ops = samsung_dma_get_ops();
- if (ret < 0) {
- printk(KERN_ERR "failed to get dma channel\n");
- return ret;
- }
-
- /* use the circular buffering if we have it available. */
- if (s3c_dma_has_circular())
- s3c2410_dma_setflags(prtd->params->channel,
- S3C2410_DMAF_CIRCULAR);
+ dma_info.cap = (samsung_dma_has_circular() ?
+ DMA_CYCLIC : DMA_SLAVE);
+ dma_info.client = prtd->params->client;
+ dma_info.direction =
+ (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ dma_info.width = prtd->params->dma_size;
+ dma_info.fifo = prtd->params->dma_addr;
+ prtd->params->ch = prtd->params->ops->request(
+ prtd->params->channel, &dma_info);
}
- s3c2410_dma_set_buffdone_fn(prtd->params->channel,
- audio_buffdone);
-
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
runtime->dma_bytes = totbytes;
spin_lock_irq(&prtd->lock);
prtd->dma_loaded = 0;
- prtd->dma_limit = runtime->hw.periods_min;
prtd->dma_period = params_period_bytes(params);
prtd->dma_start = runtime->dma_addr;
prtd->dma_pos = prtd->dma_start;
@@ -202,11 +198,12 @@
pr_debug("Entered %s\n", __func__);
- /* TODO - do we need to ensure DMA flushed */
snd_pcm_set_runtime_buffer(substream, NULL);
if (prtd->params) {
- s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+ prtd->params->ops->flush(prtd->params->ch);
+ prtd->params->ops->release(prtd->params->ch,
+ prtd->params->client);
prtd->params = NULL;
}
@@ -225,23 +222,9 @@
if (!prtd->params)
return 0;
- /* channel needs configuring for mem=>device, increment memory addr,
- * sync to pclk, half-word transfers to the IIS-FIFO. */
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- s3c2410_dma_devconfig(prtd->params->channel,
- S3C2410_DMASRC_MEM,
- prtd->params->dma_addr);
- } else {
- s3c2410_dma_devconfig(prtd->params->channel,
- S3C2410_DMASRC_HW,
- prtd->params->dma_addr);
- }
-
- s3c2410_dma_config(prtd->params->channel,
- prtd->params->dma_size);
-
/* flush the DMA channel */
- s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+ prtd->params->ops->flush(prtd->params->ch);
+
prtd->dma_loaded = 0;
prtd->dma_pos = prtd->dma_start;
@@ -265,14 +248,14 @@
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
- s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+ prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
- s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+ prtd->params->ops->stop(prtd->params->ch);
break;
default:
@@ -291,21 +274,12 @@
struct snd_pcm_runtime *runtime = substream->runtime;
struct runtime_data *prtd = runtime->private_data;
unsigned long res;
- dma_addr_t src, dst;
pr_debug("Entered %s\n", __func__);
- spin_lock(&prtd->lock);
- s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+ res = prtd->dma_pos - prtd->dma_start;
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- res = dst - prtd->dma_start;
- else
- res = src - prtd->dma_start;
-
- spin_unlock(&prtd->lock);
-
- pr_debug("Pointer %x %x\n", src, dst);
+ pr_debug("Pointer offset: %lu\n", res);
/* we seem to be getting the odd error from the pcm library due
* to out-of-bounds pointers. this is maybe due to the dma engine
diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h
index c506592..7d1ead7 100644
--- a/sound/soc/samsung/dma.h
+++ b/sound/soc/samsung/dma.h
@@ -6,7 +6,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * ALSA PCM interface for the Samsung S3C24xx CPU
+ * ALSA PCM interface for the Samsung SoC
*/
#ifndef _S3C_AUDIO_H
@@ -17,6 +17,8 @@
int channel; /* Channel ID */
dma_addr_t dma_addr;
int dma_size; /* Size of the DMA transfer */
+ unsigned ch;
+ struct samsung_dma_ops *ops;
};
#endif
