/*
 * Lite5200 board Device Tree Source
 *
 * Copyright 2006-2007 Secret Lab Technologies Ltd.
 * Grant Likely <grant.likely@secretlab.ca>
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;

/ {
	model = "fsl,lite5200";
	compatible = "fsl,lite5200";
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,5200@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <32>;
			i-cache-line-size = <32>;
			d-cache-size = <0x4000>;	// L1, 16K
			i-cache-size = <0x4000>;	// L1, 16K
			timebase-frequency = <0>;	// from bootloader
			bus-frequency = <0>;		// from bootloader
			clock-frequency = <0>;		// from bootloader
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x04000000>;	// 64MB
	};

	soc5200@f0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,mpc5200-immr";
		ranges = <0 0xf0000000 0x0000c000>;
		reg = <0xf0000000 0x00000100>;
		bus-frequency = <0>;		// from bootloader
		system-frequency = <0>;		// from bootloader

		cdm@200 {
			compatible = "fsl,mpc5200-cdm";
			reg = <0x200 0x38>;
		};

		mpc5200_pic: interrupt-controller@500 {
			// 5200 interrupts are encoded into two levels;
			interrupt-controller;
			#interrupt-cells = <3>;
			device_type = "interrupt-controller";
			compatible = "fsl,mpc5200-pic";
			reg = <0x500 0x80>;
		};

		timer@600 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <0>;
			reg = <0x600 0x10>;
			interrupts = <1 9 0>;
			interrupt-parent = <&mpc5200_pic>;
			fsl,has-wdt;
		};

		timer@610 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <1>;
			reg = <0x610 0x10>;
			interrupts = <1 10 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		timer@620 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <2>;
			reg = <0x620 0x10>;
			interrupts = <1 11 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		timer@630 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <3>;
			reg = <0x630 0x10>;
			interrupts = <1 12 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		timer@640 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <4>;
			reg = <0x640 0x10>;
			interrupts = <1 13 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		timer@650 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <5>;
			reg = <0x650 0x10>;
			interrupts = <1 14 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		timer@660 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <6>;
			reg = <0x660 0x10>;
			interrupts = <1 15 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		timer@670 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			cell-index = <7>;
			reg = <0x670 0x10>;
			interrupts = <1 16 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		rtc@800 {	// Real time clock
			compatible = "fsl,mpc5200-rtc";
			device_type = "rtc";
			reg = <0x800 0x100>;
			interrupts = <1 5 0 1 6 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		can@900 {
			compatible = "fsl,mpc5200-mscan";
			cell-index = <0>;
			interrupts = <2 17 0>;
			interrupt-parent = <&mpc5200_pic>;
			reg = <0x900 0x80>;
		};

		can@980 {
			compatible = "fsl,mpc5200-mscan";
			cell-index = <1>;
			interrupts = <2 18 0>;
			interrupt-parent = <&mpc5200_pic>;
			reg = <0x980 0x80>;
		};

		gpio@b00 {
			compatible = "fsl,mpc5200-gpio";
			reg = <0xb00 0x40>;
			interrupts = <1 7 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		gpio@c00 {
			compatible = "fsl,mpc5200-gpio-wkup";
			reg = <0xc00 0x40>;
			interrupts = <1 8 0 0 3 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		spi@f00 {
			compatible = "fsl,mpc5200-spi";
			reg = <0xf00 0x20>;
			interrupts = <2 13 0 2 14 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		usb@1000 {
			compatible = "fsl,mpc5200-ohci","ohci-be";
			reg = <0x1000 0xff>;
			interrupts = <2 6 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		dma-controller@1200 {
			device_type = "dma-controller";
			compatible = "fsl,mpc5200-bestcomm";
			reg = <0x1200 0x80>;
			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
			              3 4 0  3 5 0  3 6 0  3 7 0
			              3 8 0  3 9 0  3 10 0  3 11 0
			              3 12 0  3 13 0  3 14 0  3 15 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		xlb@1f00 {
			compatible = "fsl,mpc5200-xlb";
			reg = <0x1f00 0x100>;
		};

		serial@2000 {		// PSC1
			device_type = "serial";
			compatible = "fsl,mpc5200-psc-uart";
			port-number = <0>;  // Logical port assignment
			cell-index = <0>;
			reg = <0x2000 0x100>;
			interrupts = <2 1 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		// PSC2 in ac97 mode example
		//ac97@2200 {		// PSC2
		//	compatible = "fsl,mpc5200-psc-ac97";
		//	cell-index = <1>;
		//	reg = <0x2200 0x100>;
		//	interrupts = <2 2 0>;
		//	interrupt-parent = <&mpc5200_pic>;
		//};

		// PSC3 in CODEC mode example
		//i2s@2400 {		// PSC3
		//	compatible = "fsl,mpc5200-psc-i2s";
		//	cell-index = <2>;
		//	reg = <0x2400 0x100>;
		//	interrupts = <2 3 0>;
		//	interrupt-parent = <&mpc5200_pic>;
		//};

		// PSC4 in uart mode example
		//serial@2600 {		// PSC4
		//	device_type = "serial";
		//	compatible = "fsl,mpc5200-psc-uart";
		//	cell-index = <3>;
		//	reg = <0x2600 0x100>;
		//	interrupts = <2 11 0>;
		//	interrupt-parent = <&mpc5200_pic>;
		//};

		// PSC5 in uart mode example
		//serial@2800 {		// PSC5
		//	device_type = "serial";
		//	compatible = "fsl,mpc5200-psc-uart";
		//	cell-index = <4>;
		//	reg = <0x2800 0x100>;
		//	interrupts = <2 12 0>;
		//	interrupt-parent = <&mpc5200_pic>;
		//};

		// PSC6 in spi mode example
		//spi@2c00 {		// PSC6
		//	compatible = "fsl,mpc5200-psc-spi";
		//	cell-index = <5>;
		//	reg = <0x2c00 0x100>;
		//	interrupts = <2 4 0>;
		//	interrupt-parent = <&mpc5200_pic>;
		//};

		ethernet@3000 {
			device_type = "network";
			compatible = "fsl,mpc5200-fec";
			reg = <0x3000 0x400>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <2 5 0>;
			interrupt-parent = <&mpc5200_pic>;
			phy-handle = <&phy0>;
		};

		mdio@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc5200-mdio";
			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
			interrupt-parent = <&mpc5200_pic>;

			phy0: ethernet-phy@1 {
				device_type = "ethernet-phy";
				reg = <1>;
			};
		};

		ata@3a00 {
			device_type = "ata";
			compatible = "fsl,mpc5200-ata";
			reg = <0x3a00 0x100>;
			interrupts = <2 7 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		i2c@3d00 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc5200-i2c","fsl-i2c";
			cell-index = <0>;
			reg = <0x3d00 0x40>;
			interrupts = <2 15 0>;
			interrupt-parent = <&mpc5200_pic>;
			fsl5200-clocking;
		};

		i2c@3d40 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc5200-i2c","fsl-i2c";
			cell-index = <1>;
			reg = <0x3d40 0x40>;
			interrupts = <2 16 0>;
			interrupt-parent = <&mpc5200_pic>;
			fsl5200-clocking;
		};
		sram@8000 {
			compatible = "fsl,mpc5200-sram","sram";
			reg = <0x8000 0x4000>;
		};
	};

	pci@f0000d00 {
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		compatible = "fsl,mpc5200-pci";
		reg = <0xf0000d00 0x100>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
				 0xc000 0 0 2 &mpc5200_pic 0 0 3
				 0xc000 0 0 3 &mpc5200_pic 0 0 3
				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
		clock-frequency = <0>; // From boot loader
		interrupts = <2 8 0 2 9 0 2 10 0>;
		interrupt-parent = <&mpc5200_pic>;
		bus-range = <0 0>;
		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
	};
};