[SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Base Support

Adds new hardware and interface definitions.

Adds new interface routines - utilizing the reorganized layout of the
driver. Adds SLI-4 specific functions for attachment, initialization,
teardown, etc.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 6c24c9a..13ac108 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -105,9 +105,11 @@
 };
 
 struct hbq_dmabuf {
+	struct lpfc_dmabuf hbuf;
 	struct lpfc_dmabuf dbuf;
 	uint32_t size;
 	uint32_t tag;
+	struct lpfc_rcqe rcqe;
 };
 
 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
@@ -141,7 +143,10 @@
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t rsvd3  :19;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
@@ -159,7 +164,10 @@
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd3  :19;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;
@@ -280,6 +288,9 @@
 	enum discovery_state port_state;
 
 	uint16_t vpi;
+	uint16_t vfi;
+	uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED	0x1
 
 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
@@ -392,6 +403,9 @@
 #endif
 	uint8_t stat_data_enabled;
 	uint8_t stat_data_blocked;
+	struct list_head rcv_buffer_list;
+	uint32_t vport_flag;
+#define STATIC_VPORT	1
 };
 
 struct hbq_s {
@@ -494,6 +508,7 @@
 #define LPFC_SLI3_CRP_ENABLED		0x08
 #define LPFC_SLI3_INB_ENABLED		0x10
 #define LPFC_SLI3_BG_ENABLED		0x20
+#define LPFC_SLI3_DSS_ENABLED		0x40
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
@@ -507,8 +522,13 @@
 
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT		0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT	0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER	0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT	0x20
+#define ELS_XRI_ABORT_EVENT	0x40
+#define ASYNC_EVENT		0x80
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -567,6 +587,9 @@
 	uint32_t cfg_poll;
 	uint32_t cfg_poll_tmo;
 	uint32_t cfg_use_msi;
+	uint32_t cfg_fcp_imax;
+	uint32_t cfg_fcp_wq_count;
+	uint32_t cfg_fcp_eq_count;
 	uint32_t cfg_sg_seg_cnt;
 	uint32_t cfg_prot_sg_seg_cnt;
 	uint32_t cfg_sg_dma_buf_size;
@@ -576,6 +599,8 @@
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;
 	uint32_t cfg_enable_bg;
+	uint32_t cfg_enable_fip;
+	uint32_t cfg_log_verbose;
 
 	lpfc_vpd_t vpd;		/* vital product data */
 
@@ -659,7 +684,8 @@
 	/* pci_mem_pools */
 	struct pci_pool *lpfc_scsi_dma_buf_pool;
 	struct pci_pool *lpfc_mbuf_pool;
-	struct pci_pool *lpfc_hbq_pool;
+	struct pci_pool *lpfc_hrb_pool;	/* header receive buffer pool */
+	struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
 
 	mempool_t *mbox_mem_pool;
@@ -675,6 +701,14 @@
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
 #define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
+	uint16_t max_vports;            /*
+					 * For IOV HBAs max_vpi can change
+					 * after a reset. max_vports is max
+					 * number of vports present. This can
+					 * be greater than max_vpi.
+					 */
+	uint16_t vpi_base;
+	uint16_t vfi_base;
 	unsigned long *vpi_bmask;	/* vpi allocation table */
 
 	/* Data structure used by fabric iocb scheduler */
@@ -733,6 +767,11 @@
 /* Maximum number of events that can be outstanding at any time*/
 #define LPFC_MAX_EVT_COUNT 512
 	atomic_t fast_event_count;
+	struct lpfc_fcf fcf;
+	uint8_t fc_map[3];
+	uint8_t valid_vlan;
+	uint16_t vlan_id;
+	struct list_head fcf_conn_rec_list;
 };
 
 static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cb..82016fc 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -30,8 +30,10 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -828,18 +830,37 @@
 		return 0;
 	}
 
-	if (mrpi)
-		*mrpi = pmb->un.varRdConfig.max_rpi;
-	if (arpi)
-		*arpi = pmb->un.varRdConfig.avail_rpi;
-	if (mxri)
-		*mxri = pmb->un.varRdConfig.max_xri;
-	if (axri)
-		*axri = pmb->un.varRdConfig.avail_xri;
-	if (mvpi)
-		*mvpi = pmb->un.varRdConfig.max_vpi;
-	if (avpi)
-		*avpi = pmb->un.varRdConfig.avail_vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rd_config = &pmboxq->u.mqe.un.rd_config;
+		if (mrpi)
+			*mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		if (arpi)
+			*arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.rpi_used;
+		if (mxri)
+			*mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		if (axri)
+			*axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.xri_used;
+		if (mvpi)
+			*mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		if (avpi)
+			*avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.vpi_used;
+	} else {
+		if (mrpi)
+			*mrpi = pmb->un.varRdConfig.max_rpi;
+		if (arpi)
+			*arpi = pmb->un.varRdConfig.avail_rpi;
+		if (mxri)
+			*mxri = pmb->un.varRdConfig.max_xri;
+		if (axri)
+			*axri = pmb->un.varRdConfig.avail_xri;
+		if (mvpi)
+			*mvpi = pmb->un.varRdConfig.max_vpi;
+		if (avpi)
+			*avpi = pmb->un.varRdConfig.avail_vpi;
+	}
 
 	mempool_free(pmboxq, phba->mbox_mem_pool);
 	return 1;
@@ -2844,15 +2865,39 @@
 /*
 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
 #		support this feature
-#       0  = MSI disabled
+#       0  = MSI disabled (default)
 #       1  = MSI enabled
-#       2  = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+#       2  = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
 */
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
 /*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+	    "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+	    "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+	    "Set the number of fast-path FCP event queues, if possible");
+
+/*
 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
 #       0  = HBA resets disabled
 #       1  = HBA resets enabled (default)
@@ -2969,6 +3014,9 @@
 	&dev_attr_lpfc_poll,
 	&dev_attr_lpfc_poll_tmo,
 	&dev_attr_lpfc_use_msi,
+	&dev_attr_lpfc_fcp_imax,
+	&dev_attr_lpfc_fcp_wq_count,
+	&dev_attr_lpfc_fcp_eq_count,
 	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
 	&dev_attr_lpfc_soft_wwpn,
@@ -4105,6 +4153,9 @@
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
+	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+	lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
 	lpfc_enable_bg_init(phba, lpfc_enable_bg);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f..3802e45 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -35,17 +35,19 @@
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
-		   LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+		 LPFC_MBOXQ_t *, uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
 void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
 void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
 
 struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
 void lpfc_cleanup_rpis(struct lpfc_vport *, int);
 int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
 void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
@@ -54,6 +56,7 @@
 void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -149,15 +152,19 @@
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
 void lpfc_offline_prep(struct lpfc_hba *);
 void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
 
 int lpfc_sli_setup(struct lpfc_hba *);
 int lpfc_sli_queue_setup(struct lpfc_hba *);
 
 void lpfc_handle_eratt(struct lpfc_hba *);
 void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
 
 void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +172,32 @@
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
 int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
 
 void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
 	uint32_t , LPFC_MBOXQ_t *);
 struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
 void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+			uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
 
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
 void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
 void lpfc_stop_vport_timers(struct lpfc_vport *);
 
 void lpfc_poll_timeout(unsigned long ptr);
@@ -198,12 +221,13 @@
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
 int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
 void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +261,7 @@
 
 int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
 			     struct lpfc_iocbq *, struct lpfc_iocbq *,
 			     uint32_t);
 void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +278,12 @@
 const char* lpfc_info(struct Scsi_Host *);
 int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
 
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
 void lpfc_get_cfgparam(struct lpfc_hba *);
 void lpfc_get_vport_cfgparam(struct lpfc_vport *);
 int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +344,15 @@
 				struct lpfc_iocbq *);
 struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
 void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
 
 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
 #define HBA_EVENT_RSCN                   5
 #define HBA_EVENT_LINK_UP                2
 #define HBA_EVENT_LINK_DOWN              3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 4164b93..5199078 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -32,8 +32,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 5dd6692..42ef258 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -33,8 +33,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 8c5c3ae..9fe36bf 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -220,7 +222,7 @@
 		icmd->un.elsreq64.myID = vport->fc_myDID;
 
 		/* For ELS_REQUEST64_CR, use the VPI by default */
-		icmd->ulpContext = vport->vpi;
+		icmd->ulpContext = vport->vpi + phba->vpi_base;
 		icmd->ulpCt_h = 0;
 		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
 		if (elscmd == ELS_CMD_ECHO)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 25fc96c..0fc6600 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -29,10 +29,12 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_scsi.h"
 #include "lpfc.h"
 #include "lpfc_logmsg.h"
@@ -491,6 +493,10 @@
 	phba->work_ha = 0;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* First, try to post the next mailbox command to SLI4 device */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+		lpfc_sli4_post_async_mbox(phba);
+
 	if (ha_copy & HA_ERATT)
 		/* Handle the error attention event */
 		lpfc_handle_eratt(phba);
@@ -501,9 +507,27 @@
 	if (ha_copy & HA_LATT)
 		lpfc_handle_latt(phba);
 
+	/* Process SLI4 events */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+		if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+			lpfc_sli4_fcp_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+			lpfc_sli4_els_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ASYNC_EVENT)
+			lpfc_sli4_async_event_proc(phba);
+		if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+		}
+		if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+			lpfc_sli4_handle_received_buffer(phba);
+	}
+
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi; i++) {
+		for (i = 0; i <= phba->max_vports; i++) {
 			/*
 			 * We could have no vports in array if unloading, so if
 			 * this happens then just use the pport
@@ -2556,7 +2580,8 @@
 	 * clear_la then don't send it.
 	 */
 	if ((phba->link_state >= LPFC_CLEAR_LA) ||
-	    (vport->port_type != LPFC_PHYSICAL_PORT))
+	    (vport->port_type != LPFC_PHYSICAL_PORT) ||
+		(phba->sli_rev == LPFC_SLI_REV4))
 		return;
 
 			/* Link up discovery */
@@ -2585,7 +2610,7 @@
 
 	regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (regvpimbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+		lpfc_reg_vpi(vport, regvpimbox);
 		regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
 		regvpimbox->vport = vport;
 		if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2645,7 +2670,8 @@
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
 	    !(vport->fc_flag & FC_PT2PT) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b..a9d64cf 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -471,6 +471,35 @@
 };
 
 /*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+	 uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT		24
+#define fc_vft_hdr_r_ctl_MASK		0xFF
+#define fc_vft_hdr_r_ctl_WORD		word0
+#define fc_vft_hdr_ver_SHIFT		22
+#define fc_vft_hdr_ver_MASK		0x3
+#define fc_vft_hdr_ver_WORD		word0
+#define fc_vft_hdr_type_SHIFT		18
+#define fc_vft_hdr_type_MASK		0xF
+#define fc_vft_hdr_type_WORD		word0
+#define fc_vft_hdr_e_SHIFT		16
+#define fc_vft_hdr_e_MASK		0x1
+#define fc_vft_hdr_e_WORD		word0
+#define fc_vft_hdr_priority_SHIFT	13
+#define fc_vft_hdr_priority_MASK	0x7
+#define fc_vft_hdr_priority_WORD	word0
+#define fc_vft_hdr_vf_id_SHIFT		1
+#define fc_vft_hdr_vf_id_MASK		0xFFF
+#define fc_vft_hdr_vf_id_WORD		word0
+	uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT		24
+#define fc_vft_hdr_hopct_MASK		0xFF
+#define fc_vft_hdr_hopct_WORD		word1
+};
+
+/*
  *  Extended Link Service LS_COMMAND codes (Payload Word 0)
  */
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@
 #define PCI_DEVICE_ID_HORNET        0xfe05
 #define PCI_DEVICE_ID_ZEPHYR_SCSP   0xfe11
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE  0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK    0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
@@ -1342,15 +1374,21 @@
 #define MBX_READ_LA64       0x95
 #define MBX_REG_VPI	    0x96
 #define MBX_UNREG_VPI	    0x97
-#define MBX_REG_VNPID	    0x96
-#define MBX_UNREG_VNPID	    0x97
 
 #define MBX_WRITE_WWN       0x98
 #define MBX_SET_DEBUG       0x99
 #define MBX_LOAD_EXP_ROM    0x9C
-
-#define MBX_MAX_CMDS        0x9D
+#define MBX_SLI4_CONFIG	    0x9B
+#define MBX_SLI4_REQ_FTRS   0x9D
+#define MBX_MAX_CMDS        0x9E
+#define MBX_RESUME_RPI      0x9E
 #define MBX_SLI2_CMD_MASK   0x80
+#define MBX_REG_VFI         0x9F
+#define MBX_REG_FCFI        0xA0
+#define MBX_UNREG_VFI       0xA1
+#define MBX_UNREG_FCFI	    0xA2
+#define MBX_INIT_VFI        0xA3
+#define MBX_INIT_VPI        0xA4
 
 /* IOCB Commands */
 
@@ -1440,6 +1478,16 @@
 #define CMD_IOCB_LOGENTRY_CN		0x94
 #define CMD_IOCB_LOGENTRY_ASYNC_CN	0x96
 
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 		0xD8
+#define DSSCMD_IWRITE64_CX		0xD9
+#define DSSCMD_IREAD64_CR		0xDA
+#define DSSCMD_IREAD64_CX		0xDB
+#define DSSCMD_INVALIDATE_DEK		0xDC
+#define DSSCMD_SET_KEK			0xDD
+#define DSSCMD_GET_KEK_ID		0xDE
+#define DSSCMD_GEN_XFER			0xDF
+
 #define CMD_MAX_IOCB_CMD        0xE6
 #define CMD_IOCB_MASK           0xff
 
@@ -1466,6 +1514,7 @@
 #define MBXERR_BAD_RCV_LENGTH       14
 #define MBXERR_DMA_ERROR            15
 #define MBXERR_ERROR                16
+#define MBXERR_LINK_DOWN            0x33
 #define MBX_NOT_FINISHED           255
 
 #define MBX_BUSY                   0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@
 #endif
 };
 
-struct ulp_bde64 {	/* SLI-2 */
-	union ULP_BDE_TUS {
-		uint32_t w;
-		struct {
-#ifdef __BIG_ENDIAN_BITFIELD
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
-		} f;
-	} tus;
-	uint32_t addrLow;
-	uint32_t addrHigh;
-};
-
 typedef struct ULP_BDL {	/* SLI-2 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t bdeFlags:8;	/* BDL Flags */
@@ -2287,7 +2310,7 @@
 	uint32_t rsvd3;
 	uint32_t rsvd4;
 	uint32_t rsvd5;
-	uint16_t rsvd6;
+	uint16_t vfi;
 	uint16_t vpi;
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t rsvd1;
@@ -2297,7 +2320,7 @@
 	uint32_t rsvd4;
 	uint32_t rsvd5;
 	uint16_t vpi;
-	uint16_t rsvd6;
+	uint16_t vfi;
 #endif
 } REG_VPI_VAR;
 
@@ -2457,7 +2480,7 @@
 	uint32_t entry_index:16;
 #endif
 
-	uint32_t rsvd1;
+	uint32_t sli4_length;
 	uint32_t word_cnt;
 	uint32_t resp_offset;
 } DUMP_VAR;
@@ -2470,9 +2493,32 @@
 #define  DMP_RSP_OFFSET          0x14   /* word 5 contains first word of rsp */
 #define  DMP_RSP_SIZE            0x6C   /* maximum of 27 words of rsp data */
 
+#define  DMP_REGION_VPORT	 0x16   /* VPort info region */
+#define  DMP_VPORT_REGION_SIZE	 0x200
+#define  DMP_MBOX_OFFSET_WORD	 0x5
+
+#define  DMP_REGION_FCOEPARAM	 0x17   /* fcoe param region */
+#define  DMP_FCOEPARAM_RGN_SIZE	 0x400
+
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
 
+struct vport_rec {
+	uint8_t wwpn[8];
+	uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+	uint32_t 		signature;
+	uint32_t		rev;
+	struct vport_rec 	vport_list[MAX_STATIC_VPORT_COUNT];
+	uint32_t		resvd[66];
+};
+
 /* Option rom version structure */
 struct prog_id {
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t cmv       :  1;  /* Configure Max VPIs                   */
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
@@ -2717,10 +2765,14 @@
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
 	uint32_t cmv	   :  1;  /* Configure Max VPIs                   */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
@@ -2740,7 +2792,9 @@
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@
 
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 #else	/*  __LITTLE_ENDIAN */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
 #endif
 
-	uint32_t rsvd4;           /* Reserved                             */
+	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 #endif
 
 } CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@
 #define MENLO_TIMEOUT 30
 #define SETVAR_MLOMNT 0x103107
 #define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 0000000..39c34b3
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ *	struct temp {
+ *		uint32_t	field1;
+ *		uint32_t	field2;
+ *		uint32_t	field3;
+ *		uint32_t	field4;
+ *	#define example_bit_field_SHIFT		7
+ *	#define example_bit_field_MASK		0x03
+ *	#define example_bit_field_WORD		field4
+ *		uint32_t	field5;
+ *	};
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ *	struct temp t1;
+ *	value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ *	bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ *	bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+	(((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+	((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+		 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+	uint32_t addr_lo;
+	uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0		1
+#define LPFC_SLI4_BAR1		2
+#define LPFC_SLI4_BAR2		4
+
+#define LPFC_SLI4_MBX_EMBED	true
+#define LPFC_SLI4_MBX_NEMBED	false
+
+#define LPFC_SLI4_MB_WORD_COUNT		64
+#define LPFC_MAX_MQ_PAGE		8
+#define LPFC_MAX_WQ_PAGE		8
+#define LPFC_MAX_CQ_PAGE		4
+#define LPFC_MAX_EQ_PAGE		8
+
+#define LPFC_VIR_FUNC_MAX       32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX        5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE	0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE	16
+#define LPFC_ALIGN_64_BYTE	64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET	256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE	0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI	0x2
+#define LPFC_BMBX_BIT1_ADDR_LO	0
+#define LPFC_RPI_HDR_COUNT	64
+#define LPFC_HDR_TEMPLATE_SIZE	4096
+#define LPFC_RPI_ALLOC_ERROR 	0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT	132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX	 0
+
+/* Virtual function numbers */
+#define LPFC_VF0		0
+#define LPFC_VF1		1
+#define LPFC_VF2		2
+#define LPFC_VF3		3
+#define LPFC_VF4		4
+#define LPFC_VF5		5
+#define LPFC_VF6		6
+#define LPFC_VF7		7
+#define LPFC_VF8		8
+#define LPFC_VF9		9
+#define LPFC_VF10		10
+#define LPFC_VF11		11
+#define LPFC_VF12		12
+#define LPFC_VF13		13
+#define LPFC_VF14		14
+#define LPFC_VF15		15
+#define LPFC_VF16		16
+#define LPFC_VF17		17
+#define LPFC_VF18		18
+#define LPFC_VF19		19
+#define LPFC_VF20		20
+#define LPFC_VF21		21
+#define LPFC_VF22		22
+#define LPFC_VF23		23
+#define LPFC_VF24		24
+#define LPFC_VF25		25
+#define LPFC_VF26		26
+#define LPFC_VF27		27
+#define LPFC_VF28		28
+#define LPFC_VF29		29
+#define LPFC_VF30		30
+#define LPFC_VF31		31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0		0
+#define LPFC_PCI_FUNC1		1
+#define LPFC_PCI_FUNC2		2
+#define LPFC_PCI_FUNC3		3
+#define LPFC_PCI_FUNC4		4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT	4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST       651042
+#define LPFC_MIM_IMAX          636
+#define LPFC_FP_DEF_IMAX       10000
+#define LPFC_SP_DEF_IMAX       10000
+
+struct ulp_bde64 {
+	union ULP_BDE_TUS {
+		uint32_t w;
+		struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+#else	/*  __LITTLE_ENDIAN_BITFIELD */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
+		} f;
+	} tus;
+	uint32_t addrLow;
+	uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+	uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+	uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT	16
+#define lpfc_eqe_resource_id_MASK	0x000000FF
+#define lpfc_eqe_resource_id_WORD	word0
+#define lpfc_eqe_minor_code_SHIFT	4
+#define lpfc_eqe_minor_code_MASK	0x00000FFF
+#define lpfc_eqe_minor_code_WORD	word0
+#define lpfc_eqe_major_code_SHIFT	1
+#define lpfc_eqe_major_code_MASK	0x00000007
+#define lpfc_eqe_major_code_WORD	word0
+#define lpfc_eqe_valid_SHIFT		0
+#define lpfc_eqe_valid_MASK		0x00000001
+#define lpfc_eqe_valid_WORD		word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t word3;
+#define lpfc_cqe_valid_SHIFT		31
+#define lpfc_cqe_valid_MASK		0x00000001
+#define lpfc_cqe_valid_WORD		word3
+#define lpfc_cqe_code_SHIFT		16
+#define lpfc_cqe_code_MASK		0x000000FF
+#define lpfc_cqe_code_WORD		word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS		0x0
+#define CQE_STATUS_FCP_RSP_FAILURE	0x1
+#define CQE_STATUS_REMOTE_STOP		0x2
+#define CQE_STATUS_LOCAL_REJECT		0x3
+#define CQE_STATUS_NPORT_RJT		0x4
+#define CQE_STATUS_FABRIC_RJT		0x5
+#define CQE_STATUS_NPORT_BSY		0x6
+#define CQE_STATUS_FABRIC_BSY		0x7
+#define CQE_STATUS_INTERMED_RSP		0x8
+#define CQE_STATUS_LS_RJT		0x9
+#define CQE_STATUS_CMD_REJECT		0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK	0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY	0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR		0x0
+#define CQE_HW_STATUS_UNDERRUN		0x1
+#define CQE_HW_STATUS_OVERRUN		0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE		0x1
+#define CQE_CODE_RELEASE_WQE		0x2
+#define CQE_CODE_RECEIVE		0x4
+#define CQE_CODE_XRI_ABORTED		0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+	uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT	16
+#define lpfc_wcqe_c_request_tag_MASK	0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD	word0
+#define lpfc_wcqe_c_status_SHIFT	8
+#define lpfc_wcqe_c_status_MASK		0x000000FF
+#define lpfc_wcqe_c_status_WORD		word0
+#define lpfc_wcqe_c_hw_status_SHIFT	0
+#define lpfc_wcqe_c_hw_status_MASK	0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD	word0
+	uint32_t total_data_placed;
+	uint32_t parameter;
+	uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT		28
+#define lpfc_wcqe_c_xb_MASK		0x00000001
+#define lpfc_wcqe_c_xb_WORD		word3
+#define lpfc_wcqe_c_pv_SHIFT		27
+#define lpfc_wcqe_c_pv_MASK		0x00000001
+#define lpfc_wcqe_c_pv_WORD		word3
+#define lpfc_wcqe_c_priority_SHIFT	24
+#define lpfc_wcqe_c_priority_MASK		0x00000007
+#define lpfc_wcqe_c_priority_WORD		word3
+#define lpfc_wcqe_c_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT		16
+#define lpfc_wcqe_r_wq_id_MASK		0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD		word2
+#define lpfc_wcqe_r_wqe_index_SHIFT	0
+#define lpfc_wcqe_r_wqe_index_MASK	0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD	word2
+	uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD		lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+	uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT		8
+#define lpfc_wcqe_xa_status_MASK		0x000000FF
+#define lpfc_wcqe_xa_status_WORD		word0
+	uint32_t parameter;
+	uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT	16
+#define lpfc_wcqe_xa_remote_xid_MASK	0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD	word2
+#define lpfc_wcqe_xa_xri_SHIFT		0
+#define lpfc_wcqe_xa_xri_MASK		0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD		word2
+	uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT	lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT		30
+#define lpfc_wcqe_xa_ia_MASK		0x00000001
+#define lpfc_wcqe_xa_ia_WORD		word3
+#define CQE_XRI_ABORTED_IA_REMOTE	0
+#define CQE_XRI_ABORTED_IA_LOCAL	1
+#define lpfc_wcqe_xa_br_SHIFT		29
+#define lpfc_wcqe_xa_br_MASK		0x00000001
+#define lpfc_wcqe_xa_br_WORD		word3
+#define CQE_XRI_ABORTED_BR_BA_ACC	0
+#define CQE_XRI_ABORTED_BR_BA_RJT	1
+#define lpfc_wcqe_xa_eo_SHIFT		28
+#define lpfc_wcqe_xa_eo_MASK		0x00000001
+#define lpfc_wcqe_xa_eo_WORD		word3
+#define CQE_XRI_ABORTED_EO_REMOTE	0
+#define CQE_XRI_ABORTED_EO_LOCAL	1
+#define lpfc_wcqe_xa_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+	uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT		16
+#define lpfc_rcqe_bindex_MASK		0x0000FFF
+#define lpfc_rcqe_bindex_WORD		word0
+#define lpfc_rcqe_status_SHIFT		8
+#define lpfc_rcqe_status_MASK		0x000000FF
+#define lpfc_rcqe_status_WORD		word0
+#define FC_STATUS_RQ_SUCCESS		0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 	0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 	0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 	0x13 /* Frame Discard */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rcqe_length_SHIFT		16
+#define lpfc_rcqe_length_MASK		0x0000FFFF
+#define lpfc_rcqe_length_WORD		word2
+#define lpfc_rcqe_rq_id_SHIFT		6
+#define lpfc_rcqe_rq_id_MASK		0x000003FF
+#define lpfc_rcqe_rq_id_WORD		word2
+#define lpfc_rcqe_fcf_id_SHIFT		0
+#define lpfc_rcqe_fcf_id_MASK		0x0000003F
+#define lpfc_rcqe_fcf_id_WORD		word2
+	uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT		30
+#define lpfc_rcqe_port_MASK		0x00000001
+#define lpfc_rcqe_port_WORD		word3
+#define lpfc_rcqe_hdr_length_SHIFT	24
+#define lpfc_rcqe_hdr_length_MASK	0x0000001F
+#define lpfc_rcqe_hdr_length_WORD	word3
+#define lpfc_rcqe_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD		lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT		8
+#define lpfc_rcqe_eof_MASK		0x000000FF
+#define lpfc_rcqe_eof_WORD		word3
+#define FCOE_EOFn	0x41
+#define FCOE_EOFt	0x42
+#define FCOE_EOFni	0x49
+#define FCOE_EOFa	0x50
+#define lpfc_rcqe_sof_SHIFT		0
+#define lpfc_rcqe_sof_MASK		0x000000FF
+#define lpfc_rcqe_sof_WORD		word3
+#define FCOE_SOFi2	0x2d
+#define FCOE_SOFi3	0x2e
+#define FCOE_SOFn2	0x35
+#define FCOE_SOFn3	0x36
+};
+
+struct lpfc_wqe_generic{
+	struct ulp_bde64 bde;
+	uint32_t word3;
+	uint32_t word4;
+	uint32_t word5;
+	uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT	16
+#define lpfc_wqe_gen_context_MASK	0x0000FFFF
+#define lpfc_wqe_gen_context_WORD	word6
+#define lpfc_wqe_gen_xri_SHIFT		0
+#define lpfc_wqe_gen_xri_MASK		0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD		word6
+	uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT		23
+#define lpfc_wqe_gen_lnk_MASK		0x00000001
+#define lpfc_wqe_gen_lnk_WORD		word7
+#define lpfc_wqe_gen_erp_SHIFT		22
+#define lpfc_wqe_gen_erp_MASK		0x00000001
+#define lpfc_wqe_gen_erp_WORD		word7
+#define lpfc_wqe_gen_pu_SHIFT		20
+#define lpfc_wqe_gen_pu_MASK		0x00000003
+#define lpfc_wqe_gen_pu_WORD		word7
+#define lpfc_wqe_gen_class_SHIFT	16
+#define lpfc_wqe_gen_class_MASK		0x00000007
+#define lpfc_wqe_gen_class_WORD		word7
+#define lpfc_wqe_gen_command_SHIFT	8
+#define lpfc_wqe_gen_command_MASK	0x000000FF
+#define lpfc_wqe_gen_command_WORD	word7
+#define lpfc_wqe_gen_status_SHIFT	4
+#define lpfc_wqe_gen_status_MASK	0x0000000F
+#define lpfc_wqe_gen_status_WORD	word7
+#define lpfc_wqe_gen_ct_SHIFT		2
+#define lpfc_wqe_gen_ct_MASK		0x00000007
+#define lpfc_wqe_gen_ct_WORD		word7
+	uint32_t abort_tag;
+	uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT	0
+#define lpfc_wqe_gen_request_tag_MASK	0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD	word9
+	uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT		24
+#define lpfc_wqe_gen_ccp_MASK		0x000000FF
+#define lpfc_wqe_gen_ccp_WORD		word10
+#define lpfc_wqe_gen_ccpe_SHIFT		23
+#define lpfc_wqe_gen_ccpe_MASK		0x00000001
+#define lpfc_wqe_gen_ccpe_WORD		word10
+#define lpfc_wqe_gen_pv_SHIFT		19
+#define lpfc_wqe_gen_pv_MASK		0x00000001
+#define lpfc_wqe_gen_pv_WORD		word10
+#define lpfc_wqe_gen_pri_SHIFT		16
+#define lpfc_wqe_gen_pri_MASK		0x00000007
+#define lpfc_wqe_gen_pri_WORD		word10
+	uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT	16
+#define lpfc_wqe_gen_cq_id_MASK		0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD		word11
+#define LPFC_WQE_CQ_ID_DEFAULT	0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT		7
+#define lpfc_wqe_gen_wqec_MASK		0x00000001
+#define lpfc_wqe_gen_wqec_WORD		word11
+#define lpfc_wqe_gen_cmd_type_SHIFT	0
+#define lpfc_wqe_gen_cmd_type_MASK	0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD	word11
+	uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+	uint32_t address_hi;
+	uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+	uint32_t word2;
+#define lpfc_bde4_last_SHIFT		31
+#define lpfc_bde4_last_MASK		0x00000001
+#define lpfc_bde4_last_WORD		word2
+#define lpfc_bde4_sge_offset_SHIFT	0
+#define lpfc_bde4_sge_offset_MASK	0x000003FF
+#define lpfc_bde4_sge_offset_WORD	word2
+	uint32_t word3;
+#define lpfc_bde4_length_SHIFT		0
+#define lpfc_bde4_length_MASK		0x000000FF
+#define lpfc_bde4_length_WORD		word3
+};
+
+struct lpfc_register {
+	uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI		0x00A4
+#define LPFC_UERR_STATUS_LO		0x00A0
+#define LPFC_ONLINE0			0x00B0
+#define LPFC_ONLINE1			0x00B4
+#define LPFC_SCRATCHPAD			0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE			0x00AC
+#define lpfc_hst_state_perr_SHIFT	31
+#define lpfc_hst_state_perr_MASK	0x1
+#define lpfc_hst_state_perr_WORD	word0
+#define lpfc_hst_state_sfi_SHIFT	30
+#define lpfc_hst_state_sfi_MASK		0x1
+#define lpfc_hst_state_sfi_WORD		word0
+#define lpfc_hst_state_nip_SHIFT	29
+#define lpfc_hst_state_nip_MASK		0x1
+#define lpfc_hst_state_nip_WORD		word0
+#define lpfc_hst_state_ipc_SHIFT	28
+#define lpfc_hst_state_ipc_MASK		0x1
+#define lpfc_hst_state_ipc_WORD		word0
+#define lpfc_hst_state_xrom_SHIFT	27
+#define lpfc_hst_state_xrom_MASK	0x1
+#define lpfc_hst_state_xrom_WORD	word0
+#define lpfc_hst_state_dl_SHIFT		26
+#define lpfc_hst_state_dl_MASK		0x1
+#define lpfc_hst_state_dl_WORD		word0
+#define lpfc_hst_state_port_status_SHIFT	0
+#define lpfc_hst_state_port_status_MASK		0xFFFF
+#define lpfc_hst_state_port_status_WORD		word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET			0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY		0x0001
+#define LPFC_POST_STAGE_HOST_RDY			0x0002
+#define LPFC_POST_STAGE_BE_RESET			0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START		0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE			0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START		0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE			0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START		0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE		0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START			0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE			0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START		0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE		0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START		0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE		0x0701
+#define LPFC_POST_STAGE_ARMFW_START			0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START		0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE			0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START	0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE	0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET			0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK			0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE		0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP			0x0B03
+#define LPFC_POST_STAGE_PARSE_XML			0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE			0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE			0x0B06
+#define LPFC_POST_STAGE_RC_DONE				0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM			0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS			0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY			0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 			0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT			4
+#define lpfc_scratchpad_slirev_MASK			0xF
+#define lpfc_scratchpad_slirev_WORD			word0
+#define lpfc_scratchpad_chiptype_SHIFT			8
+#define lpfc_scratchpad_chiptype_MASK			0xFF
+#define lpfc_scratchpad_chiptype_WORD			word0
+#define lpfc_scratchpad_featurelevel1_SHIFT		16
+#define lpfc_scratchpad_featurelevel1_MASK		0xFF
+#define lpfc_scratchpad_featurelevel1_WORD		word0
+#define lpfc_scratchpad_featurelevel2_SHIFT		24
+#define lpfc_scratchpad_featurelevel2_MASK		0xFF
+#define lpfc_scratchpad_featurelevel2_WORD		word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL	0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL	0xFFFFFFFF
+
+#define LPFC_HST_ISR0		0x0C18
+#define LPFC_HST_ISR1		0x0C1C
+#define LPFC_HST_ISR2		0x0C20
+#define LPFC_HST_ISR3		0x0C24
+#define LPFC_HST_ISR4		0x0C28
+
+#define LPFC_HST_IMR0		0x0C48
+#define LPFC_HST_IMR1		0x0C4C
+#define LPFC_HST_IMR2		0x0C50
+#define LPFC_HST_IMR3		0x0C54
+#define LPFC_HST_IMR4		0x0C58
+
+#define LPFC_HST_ISCR0		0x0C78
+#define LPFC_HST_ISCR1		0x0C7C
+#define LPFC_HST_ISCR2		0x0C80
+#define LPFC_HST_ISCR3		0x0C84
+#define LPFC_HST_ISCR4		0x0C88
+
+#define LPFC_SLI4_INTR0			BIT0
+#define LPFC_SLI4_INTR1			BIT1
+#define LPFC_SLI4_INTR2			BIT2
+#define LPFC_SLI4_INTR3			BIT3
+#define LPFC_SLI4_INTR4			BIT4
+#define LPFC_SLI4_INTR5			BIT5
+#define LPFC_SLI4_INTR6			BIT6
+#define LPFC_SLI4_INTR7			BIT7
+#define LPFC_SLI4_INTR8			BIT8
+#define LPFC_SLI4_INTR9			BIT9
+#define LPFC_SLI4_INTR10		BIT10
+#define LPFC_SLI4_INTR11		BIT11
+#define LPFC_SLI4_INTR12		BIT12
+#define LPFC_SLI4_INTR13		BIT13
+#define LPFC_SLI4_INTR14		BIT14
+#define LPFC_SLI4_INTR15		BIT15
+#define LPFC_SLI4_INTR16		BIT16
+#define LPFC_SLI4_INTR17		BIT17
+#define LPFC_SLI4_INTR18		BIT18
+#define LPFC_SLI4_INTR19		BIT19
+#define LPFC_SLI4_INTR20		BIT20
+#define LPFC_SLI4_INTR21		BIT21
+#define LPFC_SLI4_INTR22		BIT22
+#define LPFC_SLI4_INTR23		BIT23
+#define LPFC_SLI4_INTR24		BIT24
+#define LPFC_SLI4_INTR25		BIT25
+#define LPFC_SLI4_INTR26		BIT26
+#define LPFC_SLI4_INTR27		BIT27
+#define LPFC_SLI4_INTR28		BIT28
+#define LPFC_SLI4_INTR29		BIT29
+#define LPFC_SLI4_INTR30		BIT30
+#define LPFC_SLI4_INTR31		BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL		0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT	16
+#define lpfc_rq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD	word0
+#define LPFC_RQ_POST_BATCH		8	/* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT		0
+#define lpfc_rq_doorbell_id_MASK		0x03FF
+#define lpfc_rq_doorbell_id_WORD		word0
+
+#define LPFC_WQ_DOORBELL		0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT	24
+#define lpfc_wq_doorbell_num_posted_MASK	0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD	word0
+#define lpfc_wq_doorbell_index_SHIFT		16
+#define lpfc_wq_doorbell_index_MASK		0x00FF
+#define lpfc_wq_doorbell_index_WORD		word0
+#define lpfc_wq_doorbell_id_SHIFT		0
+#define lpfc_wq_doorbell_id_MASK		0xFFFF
+#define lpfc_wq_doorbell_id_WORD		word0
+
+#define LPFC_EQCQ_DOORBELL		0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT		29
+#define lpfc_eqcq_doorbell_arm_MASK		0x0001
+#define lpfc_eqcq_doorbell_arm_WORD		word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT	16
+#define lpfc_eqcq_doorbell_num_released_MASK	0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD	word0
+#define lpfc_eqcq_doorbell_qt_SHIFT		10
+#define lpfc_eqcq_doorbell_qt_MASK		0x0001
+#define lpfc_eqcq_doorbell_qt_WORD		word0
+#define LPFC_QUEUE_TYPE_COMPLETION	0
+#define LPFC_QUEUE_TYPE_EVENT		1
+#define lpfc_eqcq_doorbell_eqci_SHIFT		9
+#define lpfc_eqcq_doorbell_eqci_MASK		0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT		0
+#define lpfc_eqcq_doorbell_cqid_MASK		0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT		0
+#define lpfc_eqcq_doorbell_eqid_MASK		0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD		word0
+
+#define LPFC_BMBX			0x0160
+#define lpfc_bmbx_addr_SHIFT		2
+#define lpfc_bmbx_addr_MASK		0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD		word0
+#define lpfc_bmbx_hi_SHIFT		1
+#define lpfc_bmbx_hi_MASK		0x0001
+#define lpfc_bmbx_hi_WORD		word0
+#define lpfc_bmbx_rdy_SHIFT		0
+#define lpfc_bmbx_rdy_MASK		0x0001
+#define lpfc_bmbx_rdy_WORD		word0
+
+#define LPFC_MQ_DOORBELL			0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT	16
+#define lpfc_mq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD	word0
+#define lpfc_mq_doorbell_id_SHIFT		0
+#define lpfc_mq_doorbell_id_MASK		0x03FF
+#define lpfc_mq_doorbell_id_WORD		word0
+
+struct lpfc_sli4_cfg_mhdr {
+	uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT		0
+#define lpfc_mbox_hdr_emb_MASK		0x00000001
+#define lpfc_mbox_hdr_emb_WORD		word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT	3
+#define lpfc_mbox_hdr_sge_cnt_MASK	0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD	word1
+	uint32_t payload_length;
+	uint32_t tag_lo;
+	uint32_t tag_hi;
+	uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_port_number_SHIFT		16
+#define lpfc_mbox_hdr_port_number_MASK		0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t timeout;
+		uint32_t request_length;
+		uint32_t reserved9;
+	} request;
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT		0
+#define lpfc_mbox_hdr_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_status_WORD		word7
+#define lpfc_mbox_hdr_add_status_SHIFT		8
+#define lpfc_mbox_hdr_add_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD		word7
+		uint32_t response_length;
+		uint32_t actual_response_length;
+	} response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON	0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE	0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0   0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1	0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE		0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE		0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE		0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES	0x20
+#define LPFC_MBOX_OPCODE_NOP			0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY		0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY		0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY		0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET		0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE			0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY		0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES		0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES		0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE			0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY		0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE		0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF			0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF		0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE		0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+	uint32_t word0;
+#define lpfc_eq_context_size_SHIFT	31
+#define lpfc_eq_context_size_MASK	0x00000001
+#define lpfc_eq_context_size_WORD	word0
+#define LPFC_EQE_SIZE_4			0x0
+#define LPFC_EQE_SIZE_16		0x1
+#define lpfc_eq_context_valid_SHIFT	29
+#define lpfc_eq_context_valid_MASK	0x00000001
+#define lpfc_eq_context_valid_WORD	word0
+	uint32_t word1;
+#define lpfc_eq_context_count_SHIFT	26
+#define lpfc_eq_context_count_MASK	0x00000003
+#define lpfc_eq_context_count_WORD	word1
+#define LPFC_EQ_CNT_256		0x0
+#define LPFC_EQ_CNT_512		0x1
+#define LPFC_EQ_CNT_1024	0x2
+#define LPFC_EQ_CNT_2048	0x3
+#define LPFC_EQ_CNT_4096	0x4
+	uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT	13
+#define lpfc_eq_context_delay_multi_MASK	0x000003FF
+#define lpfc_eq_context_delay_multi_WORD	word2
+	uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+	uint32_t sgl_pg0_addr_lo;
+	uint32_t sgl_pg0_addr_hi;
+	uint32_t sgl_pg1_addr_lo;
+	uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+	struct mbox_header header;
+	uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT	0
+#define lpfc_post_sgl_pages_xri_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD	word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT	16
+#define lpfc_post_sgl_pages_xricnt_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD	word0
+	struct sgl_page_pairs  sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word0;
+	struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+	uint32_t pa_lo;
+	uint32_t pa_hi;
+	uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES	19
+	struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+	void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT	0
+#define lpfc_mbx_eq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD	word0
+			struct eq_context context;
+			struct dma_address page[LPFC_MAX_EQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT	0
+#define lpfc_mbx_eq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_eq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_eq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_nop {
+	struct mbox_header header;
+	uint32_t context[2];
+};
+
+struct cq_context {
+	uint32_t word0;
+#define lpfc_cq_context_event_SHIFT	31
+#define lpfc_cq_context_event_MASK	0x00000001
+#define lpfc_cq_context_event_WORD	word0
+#define lpfc_cq_context_valid_SHIFT	29
+#define lpfc_cq_context_valid_MASK	0x00000001
+#define lpfc_cq_context_valid_WORD	word0
+#define lpfc_cq_context_count_SHIFT	27
+#define lpfc_cq_context_count_MASK	0x00000003
+#define lpfc_cq_context_count_WORD	word0
+#define LPFC_CQ_CNT_256		0x0
+#define LPFC_CQ_CNT_512		0x1
+#define LPFC_CQ_CNT_1024	0x2
+	uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT		22
+#define lpfc_cq_eq_id_MASK		0x000000FF
+#define lpfc_cq_eq_id_WORD		word1
+	uint32_t reserved0;
+	uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT	0
+#define lpfc_mbx_cq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD	word0
+			struct cq_context context;
+			struct dma_address page[LPFC_MAX_CQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT	0
+#define lpfc_mbx_cq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_cq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_cq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct wq_context {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT	0
+#define lpfc_mbx_wq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD	word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT		16
+#define lpfc_mbx_wq_create_cq_id_MASK		0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD		word0
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT	0
+#define lpfc_mbx_wq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_wq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_wq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+	uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT	16
+#define lpfc_rq_context_rq_size_MASK	0x0000000F
+#define lpfc_rq_context_rq_size_WORD	word0
+#define LPFC_RQ_RING_SIZE_512		9	/* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024		10	/* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048		11	/* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096		12	/* 4096 entries */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT	16
+#define lpfc_rq_context_cq_id_MASK	0x000003FF
+#define lpfc_rq_context_cq_id_WORD	word2
+#define lpfc_rq_context_buf_size_SHIFT	0
+#define lpfc_rq_context_buf_size_MASK	0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD	word2
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT	0
+#define lpfc_mbx_rq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD	word0
+			struct rq_context context;
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT	0
+#define lpfc_mbx_rq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_rq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_rq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct mq_context {
+	uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT	22
+#define lpfc_mq_context_cq_id_MASK	0x000003FF
+#define lpfc_mq_context_cq_id_WORD	word0
+#define lpfc_mq_context_count_SHIFT	16
+#define lpfc_mq_context_count_MASK	0x0000000F
+#define lpfc_mq_context_count_WORD	word0
+#define LPFC_MQ_CNT_16		0x5
+#define LPFC_MQ_CNT_32		0x6
+#define LPFC_MQ_CNT_64		0x7
+#define LPFC_MQ_CNT_128		0x8
+	uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT	31
+#define lpfc_mq_context_valid_MASK	0x00000001
+#define lpfc_mq_context_valid_WORD	word1
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT	0
+#define lpfc_mbx_mq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD	word0
+			struct mq_context context;
+			struct dma_address page[LPFC_MAX_MQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT	0
+#define lpfc_mbx_mq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_mq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_mq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT  0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK   0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD   word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT   16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK    0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD    word10
+	uint32_t rpi_paddr_lo;
+	uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge {	/* SLI-4 */
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+
+	uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT	0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK	0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD	word2
+#define lpfc_sli4_sge_last_SHIFT	31 /* Last SEG in the SGL sets
+						this  flag !! */
+#define lpfc_sli4_sge_last_MASK		0x00000001
+#define lpfc_sli4_sge_last_WORD		word2
+	uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT		0
+#define lpfc_sli4_sge_len_MASK		0x0001FFFF
+#define lpfc_sli4_sge_len_WORD		word3
+};
+
+struct fcf_record {
+	uint32_t max_rcv_size;
+	uint32_t fka_adv_period;
+	uint32_t fip_priority;
+	uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT		0
+#define lpfc_fcf_record_mac_0_MASK		0x000000FF
+#define lpfc_fcf_record_mac_0_WORD		word3
+#define lpfc_fcf_record_mac_1_SHIFT		8
+#define lpfc_fcf_record_mac_1_MASK		0x000000FF
+#define lpfc_fcf_record_mac_1_WORD		word3
+#define lpfc_fcf_record_mac_2_SHIFT		16
+#define lpfc_fcf_record_mac_2_MASK		0x000000FF
+#define lpfc_fcf_record_mac_2_WORD		word3
+#define lpfc_fcf_record_mac_3_SHIFT		24
+#define lpfc_fcf_record_mac_3_MASK		0x000000FF
+#define lpfc_fcf_record_mac_3_WORD		word3
+	uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT		0
+#define lpfc_fcf_record_mac_4_MASK		0x000000FF
+#define lpfc_fcf_record_mac_4_WORD		word4
+#define lpfc_fcf_record_mac_5_SHIFT		8
+#define lpfc_fcf_record_mac_5_MASK		0x000000FF
+#define lpfc_fcf_record_mac_5_WORD		word4
+#define lpfc_fcf_record_fcf_avail_SHIFT		16
+#define lpfc_fcf_record_fcf_avail_MASK		0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD		word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT	24
+#define lpfc_fcf_record_mac_addr_prov_MASK	0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD	word4
+#define LPFC_FCF_FPMA           1 	/* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA           2       /* Server Provided MAC Address */
+	uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT	0
+#define lpfc_fcf_record_fab_name_0_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD		word5
+#define lpfc_fcf_record_fab_name_1_SHIFT	8
+#define lpfc_fcf_record_fab_name_1_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD		word5
+#define lpfc_fcf_record_fab_name_2_SHIFT	16
+#define lpfc_fcf_record_fab_name_2_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD		word5
+#define lpfc_fcf_record_fab_name_3_SHIFT	24
+#define lpfc_fcf_record_fab_name_3_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD		word5
+	uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT	0
+#define lpfc_fcf_record_fab_name_4_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD		word6
+#define lpfc_fcf_record_fab_name_5_SHIFT	8
+#define lpfc_fcf_record_fab_name_5_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD		word6
+#define lpfc_fcf_record_fab_name_6_SHIFT	16
+#define lpfc_fcf_record_fab_name_6_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD		word6
+#define lpfc_fcf_record_fab_name_7_SHIFT	24
+#define lpfc_fcf_record_fab_name_7_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD		word6
+	uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT		0
+#define lpfc_fcf_record_fc_map_0_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD		word7
+#define lpfc_fcf_record_fc_map_1_SHIFT		8
+#define lpfc_fcf_record_fc_map_1_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD		word7
+#define lpfc_fcf_record_fc_map_2_SHIFT		16
+#define lpfc_fcf_record_fc_map_2_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD		word7
+#define lpfc_fcf_record_fcf_valid_SHIFT		24
+#define lpfc_fcf_record_fcf_valid_MASK		0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD		word7
+	uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT		0
+#define lpfc_fcf_record_fcf_index_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD		word8
+#define lpfc_fcf_record_fcf_state_SHIFT		16
+#define lpfc_fcf_record_fcf_state_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD		word8
+	uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	union {
+		struct {
+			uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK		0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD		word10
+		} request;
+		struct {
+			uint32_t eventag;
+		} response;
+	} u;
+	uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK	0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD	word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT        0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK         0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD         word10
+	struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT	0
+#define lpfc_mbx_del_fcf_tbl_count_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD		word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT	16
+#define lpfc_mbx_del_fcf_tbl_index_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD		word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS					0x0
+#define STATUS_FAILED 					0x1
+#define STATUS_ILLEGAL_REQUEST				0x2
+#define STATUS_ILLEGAL_FIELD				0x3
+#define STATUS_INSUFFICIENT_BUFFER 			0x4
+#define STATUS_UNAUTHORIZED_REQUEST			0x5
+#define STATUS_FLASHROM_SAVE_FAILED			0x17
+#define STATUS_FLASHROM_RESTORE_FAILED			0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED			0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 		0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM		0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM		0x1d
+#define STATUS_ASSERT_FAILED				0x1e
+#define STATUS_INVALID_SESSION				0x1f
+#define STATUS_INVALID_CONNECTION			0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT		0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH			0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID			0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND			0x26
+#define STATUS_FLASHROM_READ_FAILED			0x27
+#define STATUS_POLL_IOCTL_TIMEOUT			0x28
+#define STATUS_ERROR_ACITMAIN				0x2a
+#define STATUS_REBOOT_REQUIRED				0x2c
+#define STATUS_FCF_IN_USE				0x3a
+
+struct lpfc_mbx_sli4_config {
+	struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+	uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT		31
+#define lpfc_init_vfi_vr_MASK		0x00000001
+#define lpfc_init_vfi_vr_WORD		word1
+#define lpfc_init_vfi_vt_SHIFT		30
+#define lpfc_init_vfi_vt_MASK		0x00000001
+#define lpfc_init_vfi_vt_WORD		word1
+#define lpfc_init_vfi_vf_SHIFT		29
+#define lpfc_init_vfi_vf_MASK		0x00000001
+#define lpfc_init_vfi_vf_WORD		word1
+#define lpfc_init_vfi_vfi_SHIFT		0
+#define lpfc_init_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT	0
+#define lpfc_init_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD		word2
+	uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT		13
+#define lpfc_init_vfi_pri_MASK		0x00000007
+#define lpfc_init_vfi_pri_WORD		word3
+#define lpfc_init_vfi_vf_id_SHIFT	1
+#define lpfc_init_vfi_vf_id_MASK	0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD	word3
+	uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT	24
+#define lpfc_init_vfi_hop_count_MASK	0x000000FF
+#define lpfc_init_vfi_hop_count_WORD	word4
+};
+
+struct lpfc_mbx_reg_vfi {
+	uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT		28
+#define lpfc_reg_vfi_vp_MASK		0x00000001
+#define lpfc_reg_vfi_vp_WORD		word1
+#define lpfc_reg_vfi_vfi_SHIFT		0
+#define lpfc_reg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT		16
+#define lpfc_reg_vfi_vpi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD		word2
+#define lpfc_reg_vfi_fcfi_SHIFT		0
+#define lpfc_reg_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	struct ulp_bde64 bde;
+	uint32_t word8_rsvd;
+	uint32_t word9_rsvd;
+	uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT		0
+#define lpfc_reg_vfi_nport_id_MASK		0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD		word10
+};
+
+struct lpfc_mbx_init_vpi {
+	uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT		16
+#define lpfc_init_vpi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD		word1
+#define lpfc_init_vpi_vpi_SHIFT		0
+#define lpfc_init_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD		word1
+};
+
+struct lpfc_mbx_read_vpi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT	0
+#define lpfc_mbx_read_vpi_vnportid_MASK		0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT	0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD		word4
+#define lpfc_mbx_read_vpi_pb_SHIFT		15
+#define lpfc_mbx_read_vpi_pb_MASK		0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD		word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT	16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK	0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD	word4
+#define lpfc_mbx_read_vpi_ns_SHIFT		30
+#define lpfc_mbx_read_vpi_ns_MASK		0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD		word4
+#define lpfc_mbx_read_vpi_hl_SHIFT		31
+#define lpfc_mbx_read_vpi_hl_MASK		0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD		word4
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT		0
+#define lpfc_mbx_read_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_0_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD		word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_1_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD		word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT		16
+#define lpfc_mbx_read_vpi_mac_2_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD		word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT		24
+#define lpfc_mbx_read_vpi_mac_3_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_4_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD		word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_5_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD		word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT	16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK		0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD		word8
+#define lpfc_mbx_read_vpi_vv_SHIFT		28
+#define lpfc_mbx_read_vpi_vv_MASK		0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD		word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT	0
+#define lpfc_unreg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD		word2
+};
+
+struct lpfc_mbx_resume_rpi {
+	uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT	0
+#define lpfc_resume_rpi_rpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD	word1
+	uint32_t event_tag;
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT	0
+#define lpfc_resume_rpi_vpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD	word6
+#define lpfc_resume_rpi_vfi_SHIFT	16
+#define lpfc_resume_rpi_vfi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD	word6
+};
+
+#define REG_FCF_INVALID_QID	0xFFFF
+struct lpfc_mbx_reg_fcfi {
+	uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT	0
+#define lpfc_reg_fcfi_info_index_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD	word1
+#define lpfc_reg_fcfi_fcfi_SHIFT	16
+#define lpfc_reg_fcfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT	0
+#define lpfc_reg_fcfi_rq_id1_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD	word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT	16
+#define lpfc_reg_fcfi_rq_id0_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD	word2
+	uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT	0
+#define lpfc_reg_fcfi_rq_id3_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD	word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT	16
+#define lpfc_reg_fcfi_rq_id2_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD	word3
+	uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT	24
+#define lpfc_reg_fcfi_type_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD	word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT	16
+#define lpfc_reg_fcfi_type_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD	word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD	word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD	word4
+	uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT	24
+#define lpfc_reg_fcfi_type_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD	word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT	16
+#define lpfc_reg_fcfi_type_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD	word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD	word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD	word5
+	uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT	24
+#define lpfc_reg_fcfi_type_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD	word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT	16
+#define lpfc_reg_fcfi_type_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD	word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD	word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD	word6
+	uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT	24
+#define lpfc_reg_fcfi_type_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD	word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT	16
+#define lpfc_reg_fcfi_type_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD	word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD	word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD	word7
+	uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT		13
+#define lpfc_reg_fcfi_mam_MASK		0x00000003
+#define lpfc_reg_fcfi_mam_WORD		word8
+#define LPFC_MAM_BOTH		0	/* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA		1	/* Server Provided MAC Address */
+#define LPFC_MAM_FPMA		2	/* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT		12
+#define lpfc_reg_fcfi_vv_MASK		0x00000001
+#define lpfc_reg_fcfi_vv_WORD		word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT	0
+#define lpfc_reg_fcfi_vlan_tag_MASK	0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD	word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+	uint32_t word1_rsv;
+	uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT		0
+#define lpfc_unreg_fcfi_MASK		0x0000FFFF
+#define lpfc_unreg_fcfi_WORD		word2
+};
+
+struct lpfc_mbx_read_rev {
+	uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT  		16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK   		0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD   		word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT		20
+#define lpfc_mbx_rd_rev_fcoe_MASK		0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD		word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT		29
+#define lpfc_mbx_rd_rev_vpd_MASK		0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD		word1
+	uint32_t first_hw_rev;
+	uint32_t second_hw_rev;
+	uint32_t word4_rsvd;
+	uint32_t third_hw_rev;
+	uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT		0
+#define lpfc_mbx_rd_rev_fcph_low_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD		word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT		8
+#define lpfc_mbx_rd_rev_fcph_high_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD		word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT	16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD	word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT	24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD	word6
+	uint32_t word7_rsvd;
+	uint32_t fw_id_rev;
+	uint8_t  fw_name[16];
+	uint32_t ulp_fw_id_rev;
+	uint8_t  ulp_fw_name[16];
+	uint32_t word18_47_rsvd[30];
+	uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT		0
+#define lpfc_mbx_rd_rev_avail_len_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD		word48
+	uint32_t vpd_paddr_low;
+	uint32_t vpd_paddr_high;
+	uint32_t avail_vpd_len;
+	uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+	uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT		0
+#define lpfc_mbx_rd_conf_max_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD		word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT		8
+#define lpfc_mbx_rd_conf_init_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT	0
+#define lpfc_mbx_rd_conf_nport_did_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD		word2
+#define lpfc_mbx_rd_conf_topology_SHIFT		24
+#define lpfc_mbx_rd_conf_topology_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT		0
+#define lpfc_mbx_rd_conf_ao_MASK		0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD		word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT		8
+#define lpfc_mbx_rd_conf_bb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT		12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_mc_SHIFT		29
+#define lpfc_mbx_rd_conf_mc_MASK		0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD		word3
+	uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD		word4
+	uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_lp_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD		word5
+	uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_al_tov_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD		word8
+	uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT		0
+#define lpfc_mbx_rd_conf_lmt_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD		word9
+	uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT		0
+#define lpfc_mbx_rd_conf_max_alpa_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD		word10
+	uint32_t word11_rsvd;
+	uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT		0
+#define lpfc_mbx_rd_conf_xri_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD		word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT	16
+#define lpfc_mbx_rd_conf_xri_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD		word12
+	uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_rpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD		word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_rpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD		word13
+	uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_vpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD		word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_vpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD		word14
+	uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT         0
+#define lpfc_mbx_rd_conf_vfi_base_MASK          0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD          word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT        16
+#define lpfc_mbx_rd_conf_vfi_count_MASK         0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD         word15
+	uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT	0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD		word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK	0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD	word16
+	uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_rq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD		word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_eq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD		word17
+	uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_wq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD		word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_cq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD		word18
+};
+
+struct lpfc_mbx_request_features {
+	uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT		0
+#define lpfc_mbx_rq_ftr_qry_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD		word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 			0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES	0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER		0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES	0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
+#define MB_CQE_STATUS_DMA_FAILED		0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+	uint32_t word0;
+#define lpfc_mqe_status_SHIFT		16
+#define lpfc_mqe_status_MASK		0x0000FFFF
+#define lpfc_mqe_status_WORD		word0
+#define lpfc_mqe_command_SHIFT		8
+#define lpfc_mqe_command_MASK		0x000000FF
+#define lpfc_mqe_command_WORD		word0
+	union {
+		uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+		/* sli4 mailbox commands */
+		struct lpfc_mbx_sli4_config sli4_config;
+		struct lpfc_mbx_init_vfi init_vfi;
+		struct lpfc_mbx_reg_vfi reg_vfi;
+		struct lpfc_mbx_reg_vfi unreg_vfi;
+		struct lpfc_mbx_init_vpi init_vpi;
+		struct lpfc_mbx_resume_rpi resume_rpi;
+		struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+		struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+		struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+		struct lpfc_mbx_reg_fcfi reg_fcfi;
+		struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+		struct lpfc_mbx_mq_create mq_create;
+		struct lpfc_mbx_eq_create eq_create;
+		struct lpfc_mbx_cq_create cq_create;
+		struct lpfc_mbx_wq_create wq_create;
+		struct lpfc_mbx_rq_create rq_create;
+		struct lpfc_mbx_mq_destroy mq_destroy;
+		struct lpfc_mbx_eq_destroy eq_destroy;
+		struct lpfc_mbx_cq_destroy cq_destroy;
+		struct lpfc_mbx_wq_destroy wq_destroy;
+		struct lpfc_mbx_rq_destroy rq_destroy;
+		struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+		struct lpfc_mbx_nembed_cmd nembed_cmd;
+		struct lpfc_mbx_read_rev read_rev;
+		struct lpfc_mbx_read_vpi read_vpi;
+		struct lpfc_mbx_read_config rd_config;
+		struct lpfc_mbx_request_features req_ftrs;
+		struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+		struct lpfc_mbx_nop nop;
+	} un;
+};
+
+struct lpfc_mcqe {
+	uint32_t word0;
+#define lpfc_mcqe_status_SHIFT		0
+#define lpfc_mcqe_status_MASK		0x0000FFFF
+#define lpfc_mcqe_status_WORD		word0
+#define lpfc_mcqe_ext_status_SHIFT	16
+#define lpfc_mcqe_ext_status_MASK  	0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD 	word0
+	uint32_t mcqe_tag0;
+	uint32_t mcqe_tag1;
+	uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT	31
+#define lpfc_trailer_valid_MASK		0x00000001
+#define lpfc_trailer_valid_WORD		trailer
+#define lpfc_trailer_async_SHIFT	30
+#define lpfc_trailer_async_MASK		0x00000001
+#define lpfc_trailer_async_WORD		trailer
+#define lpfc_trailer_hpi_SHIFT		29
+#define lpfc_trailer_hpi_MASK		0x00000001
+#define lpfc_trailer_hpi_WORD		trailer
+#define lpfc_trailer_completed_SHIFT	28
+#define lpfc_trailer_completed_MASK	0x00000001
+#define lpfc_trailer_completed_WORD	trailer
+#define lpfc_trailer_consumed_SHIFT	27
+#define lpfc_trailer_consumed_MASK	0x00000001
+#define lpfc_trailer_consumed_WORD	trailer
+#define lpfc_trailer_type_SHIFT		16
+#define lpfc_trailer_type_MASK		0x000000FF
+#define lpfc_trailer_type_WORD		trailer
+#define lpfc_trailer_code_SHIFT		8
+#define lpfc_trailer_code_MASK		0x000000FF
+#define lpfc_trailer_code_WORD		trailer
+#define LPFC_TRAILER_CODE_LINK	0x1
+#define LPFC_TRAILER_CODE_FCOE	0x2
+#define LPFC_TRAILER_CODE_DCBX	0x3
+};
+
+struct lpfc_acqe_link {
+	uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT		24
+#define lpfc_acqe_link_speed_MASK		0x000000FF
+#define lpfc_acqe_link_speed_WORD		word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO		0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS		0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS		0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS		0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS		0x4
+#define lpfc_acqe_link_duplex_SHIFT		16
+#define lpfc_acqe_link_duplex_MASK		0x000000FF
+#define lpfc_acqe_link_duplex_WORD		word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE		0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF		0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL		0x2
+#define lpfc_acqe_link_status_SHIFT		8
+#define lpfc_acqe_link_status_MASK		0x000000FF
+#define lpfc_acqe_link_status_WORD		word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN		0x0
+#define LPFC_ASYNC_LINK_STATUS_UP		0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN	0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP	0x3
+#define lpfc_acqe_link_physical_SHIFT		0
+#define lpfc_acqe_link_physical_MASK		0x000000FF
+#define lpfc_acqe_link_physical_WORD		word0
+#define LPFC_ASYNC_LINK_PORT_A			0x0
+#define LPFC_ASYNC_LINK_PORT_B			0x1
+	uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT	0
+#define lpfc_acqe_link_fault_MASK	0x000000FF
+#define lpfc_acqe_link_fault_WORD	word1
+#define LPFC_ASYNC_LINK_FAULT_NONE	0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL	0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE	0x2
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+	uint32_t fcf_index;
+	uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT		0
+#define lpfc_acqe_fcoe_fcf_count_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD		word1
+#define lpfc_acqe_fcoe_event_type_SHIFT		16
+#define lpfc_acqe_fcoe_event_type_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD		word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF		0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL	0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD		0x3
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+	uint32_t tlv_ttl;
+	uint32_t reserved;
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+	struct lpfc_mqe mqe;
+	struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+	uint32_t word6;
+#define wqe_xri_SHIFT         0
+#define wqe_xri_MASK          0x0000FFFF
+#define wqe_xri_WORD          word6
+#define wqe_ctxt_tag_SHIFT    16
+#define wqe_ctxt_tag_MASK     0x0000FFFF
+#define wqe_ctxt_tag_WORD     word6
+	uint32_t word7;
+#define wqe_ct_SHIFT          2
+#define wqe_ct_MASK           0x00000003
+#define wqe_ct_WORD           word7
+#define wqe_status_SHIFT      4
+#define wqe_status_MASK       0x0000000f
+#define wqe_status_WORD       word7
+#define wqe_cmnd_SHIFT        8
+#define wqe_cmnd_MASK         0x000000ff
+#define wqe_cmnd_WORD         word7
+#define wqe_class_SHIFT       16
+#define wqe_class_MASK        0x00000007
+#define wqe_class_WORD        word7
+#define wqe_pu_SHIFT          20
+#define wqe_pu_MASK           0x00000003
+#define wqe_pu_WORD           word7
+#define wqe_erp_SHIFT         22
+#define wqe_erp_MASK          0x00000001
+#define wqe_erp_WORD          word7
+#define wqe_lnk_SHIFT         23
+#define wqe_lnk_MASK          0x00000001
+#define wqe_lnk_WORD          word7
+#define wqe_tmo_SHIFT         24
+#define wqe_tmo_MASK          0x000000ff
+#define wqe_tmo_WORD          word7
+	uint32_t abort_tag; /* word 8 in WQE */
+	uint32_t word9;
+#define wqe_reqtag_SHIFT      0
+#define wqe_reqtag_MASK       0x0000FFFF
+#define wqe_reqtag_WORD       word9
+#define wqe_rcvoxid_SHIFT     16
+#define wqe_rcvoxid_MASK       0x0000FFFF
+#define wqe_rcvoxid_WORD       word9
+	uint32_t word10;
+#define wqe_pri_SHIFT         16
+#define wqe_pri_MASK          0x00000007
+#define wqe_pri_WORD          word10
+#define wqe_pv_SHIFT          19
+#define wqe_pv_MASK           0x00000001
+#define wqe_pv_WORD           word10
+#define wqe_xc_SHIFT          21
+#define wqe_xc_MASK           0x00000001
+#define wqe_xc_WORD           word10
+#define wqe_ccpe_SHIFT        23
+#define wqe_ccpe_MASK         0x00000001
+#define wqe_ccpe_WORD         word10
+#define wqe_ccp_SHIFT         24
+#define wqe_ccp_MASK         0x000000ff
+#define wqe_ccp_WORD         word10
+	uint32_t word11;
+#define wqe_cmd_type_SHIFT  0
+#define wqe_cmd_type_MASK   0x0000000f
+#define wqe_cmd_type_WORD   word11
+#define wqe_wqec_SHIFT      7
+#define wqe_wqec_MASK       0x00000001
+#define wqe_wqec_WORD       word11
+#define wqe_cqid_SHIFT      16
+#define wqe_cqid_MASK       0x000003ff
+#define wqe_cqid_WORD       word11
+};
+
+struct wqe_did {
+	uint32_t word5;
+#define wqe_els_did_SHIFT         0
+#define wqe_els_did_MASK          0x00FFFFFF
+#define wqe_els_did_WORD          word5
+#define wqe_xmit_bls_ar_SHIFT         30
+#define wqe_xmit_bls_ar_MASK          0x00000001
+#define wqe_xmit_bls_ar_WORD          word5
+#define wqe_xmit_bls_xo_SHIFT         31
+#define wqe_xmit_bls_xo_MASK          0x00000001
+#define wqe_xmit_bls_xo_WORD          word5
+};
+
+struct els_request64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t word4;
+#define els_req64_sid_SHIFT         0
+#define els_req64_sid_MASK          0x00FFFFFF
+#define els_req64_sid_WORD          word4
+#define els_req64_sp_SHIFT          24
+#define els_req64_sp_MASK           0x00000001
+#define els_req64_sp_WORD           word4
+#define els_req64_vf_SHIFT          25
+#define els_req64_vf_MASK           0x00000001
+#define els_req64_vf_WORD           word4
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t word12;
+#define els_req64_vfid_SHIFT        1
+#define els_req64_vfid_MASK         0x00000FFF
+#define els_req64_vfid_WORD         word12
+#define els_req64_pri_SHIFT         13
+#define els_req64_pri_MASK          0x00000007
+#define els_req64_pri_WORD          word12
+	uint32_t word13;
+#define els_req64_hopcnt_SHIFT      24
+#define els_req64_hopcnt_MASK       0x000000ff
+#define els_req64_hopcnt_WORD       word13
+	uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t rsvd3;
+	uint32_t rsvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+	uint32_t payload0;
+	uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT  0
+#define xmit_bls_rsp64_rxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD   word1
+#define xmit_bls_rsp64_oxid_SHIFT  16
+#define xmit_bls_rsp64_oxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD   word1
+	uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT  0
+#define xmit_bls_rsp64_seqcntlo_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD   word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT  16
+#define xmit_bls_rsp64_seqcnthi_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD   word2
+	uint32_t rsrvd3;
+	uint32_t rsrvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+	uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK  0x000000001
+#define wqe_si_WORD  word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK  0x000000001
+#define wqe_la_WORD  word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK  0x000000001
+#define wqe_ls_WORD  word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK  0x0000000ff
+#define wqe_dfctl_WORD  word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK  0x0000000ff
+#define wqe_type_WORD  word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK  0x0000000ff
+#define wqe_rctl_WORD  word5
+};
+
+struct xmit_seq64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_offset;
+	uint32_t relative_offset;
+	struct wqe_rctl_dfctl wge_ctl;
+	struct wqe_common wqe_com; /* words 6-11 */
+	/* Note: word10 different REVISIT */
+	uint32_t xmit_len;
+	uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_len;
+	uint32_t rsvd4;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t command_len;
+	uint32_t payload_len;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+	uint32_t rsrvd[5];           /* words 0-4 */
+	struct wqe_did	wqe_dest;  /* word 5 */
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+	uint32_t rsrvd[3];
+	uint32_t word3;
+#define	abort_cmd_ia_SHIFT  0
+#define	abort_cmd_ia_MASK  0x000000001
+#define	abort_cmd_ia_WORD  word3
+#define	abort_cmd_criteria_SHIFT  8
+#define	abort_cmd_criteria_MASK  0x0000000ff
+#define	abort_cmd_criteria_WORD  word3
+	uint32_t rsrvd4;
+	uint32_t rsrvd5;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t total_xfer_len;
+	uint32_t initial_xfer_len;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;          /* word 3 */
+	uint32_t total_xfer_len;       /* word 4 */
+	uint32_t rsrvd5;               /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+	struct ulp_bde64 bde;	 /* words 0-2 */
+	uint32_t rsrvd[3];             /* words 3-5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+	uint32_t words[16];
+	struct lpfc_wqe_generic generic;
+	struct fcp_icmnd64_wqe fcp_icmd;
+	struct fcp_iread64_wqe fcp_iread;
+	struct fcp_iwrite64_wqe fcp_iwrite;
+	struct abort_cmd_wqe abort_cmd;
+	struct create_xri_wqe create_xri;
+	struct xmit_bcast64_wqe xmit_bcast64;
+	struct xmit_seq64_wqe xmit_sequence;
+	struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+	struct xmit_els_rsp64_wqe xmit_els_rsp;
+	struct els_request64_wqe els_req;
+	struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3f06ce2..e9e4a1d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -34,8 +34,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -51,9 +53,23 @@
 unsigned long _dump_buf_dif_order;
 spinlock_t _dump_buf_lock;
 
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
 static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
 
 static struct scsi_transport_template *lpfc_transport_template = NULL;
 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -646,6 +662,77 @@
 
 	return 0;
 }
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb, *psb_next;
+	LIST_HEAD(aborts);
+	int ret;
+	unsigned long iflag = 0;
+	ret = lpfc_hba_down_post_s3(phba);
+	if (ret)
+		return ret;
+	/* At this point in time the HBA is either reset or DOA. Either
+	 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+	 * on the lpfc_sgl_list so that it can either be freed if the
+	 * driver is unloading or reposted if the driver is restarting
+	 * the port.
+	 */
+	spin_lock_irq(&phba->hbalock);  /* required for lpfc_sgl_list and */
+					/* scsl_buf_list */
+	/* abts_sgl_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+			&phba->sli4_hba.lpfc_sgl_list);
+	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+	/* abts_scsi_buf_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+			&aborts);
+	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+		psb->pCmd = NULL;
+		psb->status = IOSTAT_SUCCESS;
+	}
+	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+	list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+	return (*phba->lpfc_hba_down_post)(phba);
+}
 
 /**
  * lpfc_hb_timeout - The HBA-timer timeout handler
@@ -853,6 +940,25 @@
 }
 
 /**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli4_brdreset(phba);
+	lpfc_hba_down_post(phba);
+	lpfc_sli4_post_status_check(phba);
+	lpfc_unblock_mgmt_io(phba);
+	phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
  * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -1057,6 +1163,65 @@
 }
 
 /**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	uint32_t event_data;
+	struct Scsi_Host *shost;
+
+	/* If the pci channel is offline, ignore possible errors, since
+	 * we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev))
+		return;
+	/* If resets are disabled then leave the HBA alone and return */
+	if (!phba->cfg_enable_hba_reset)
+		return;
+
+	/* Send an internal error event to mgmt application */
+	lpfc_board_errevt_to_mgmt(phba);
+
+	/* For now, the actual action for SLI4 device handling is not
+	 * specified yet, just treated it as adaptor hardware failure
+	 */
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+			phba->work_status[0], phba->work_status[1]);
+
+	event_data = FC_REG_DUMP_EVENT;
+	shost = lpfc_shost_from_vport(vport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(event_data), (char *) &event_data,
+				  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+	lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+	(*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
  * lpfc_handle_latt - The HBA link event handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -1312,6 +1477,7 @@
 	uint16_t dev_id = phba->pcidev->device;
 	int max_speed;
 	int GE = 0;
+	int oneConnect = 0; /* default is not a oneConnect */
 	struct {
 		char * name;
 		int    max_speed;
@@ -1457,6 +1623,14 @@
 	case PCI_DEVICE_ID_PROTEUS_S:
 		m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
 		break;
+	case PCI_DEVICE_ID_TIGERSHARK:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+		break;
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+		break;
 	default:
 		m = (typeof(m)){ NULL };
 		break;
@@ -1464,13 +1638,24 @@
 
 	if (mdp && mdp[0] == '\0')
 		snprintf(mdp, 79,"%s", m.name);
-	if (descp && descp[0] == '\0')
-		snprintf(descp, 255,
-			"Emulex %s %d%s %s %s",
-			m.name, m.max_speed,
-			(GE) ? "GE" : "Gb",
-			m.bus,
-			(GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+	/* oneConnect hba requires special processing, they are all initiators
+	 * and we put the port number on the end
+	 */
+	if (descp && descp[0] == '\0') {
+		if (oneConnect)
+			snprintf(descp, 255,
+				"Emulex OneConnect %s, FCoE Initiator, Port %s",
+				m.name,
+				phba->Port);
+		else
+			snprintf(descp, 255,
+				"Emulex %s %d%s %s %s",
+				m.name, m.max_speed,
+				(GE) ? "GE" : "Gb",
+				m.bus,
+				(GE) ? "FCoE Adapter" :
+					"Fibre Channel Adapter");
+	}
 }
 
 /**
@@ -1911,14 +2096,21 @@
 		return 1;
 	}
 
-	if (lpfc_sli_hba_setup(phba)) {	/* Initialize the HBA */
-		lpfc_unblock_mgmt_io(phba);
-		return 1;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
+	} else {
+		if (lpfc_sli_hba_setup(phba)) {	/* Initialize SLI2/SLI3 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
 	}
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
@@ -1980,11 +2172,12 @@
 	/* Issue an unreg_login to all nodes on all vports */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL) {
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 
 			if (vports[i]->load_flag & FC_UNLOADING)
 				continue;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
 			shost =	lpfc_shost_from_vport(vports[i]);
 			list_for_each_entry_safe(ndlp, next_ndlp,
 						 &vports[i]->fc_nodes,
@@ -2029,11 +2222,11 @@
 	if (phba->pport->fc_flag & FC_OFFLINE_MODE)
 		return;
 
-	/* stop all timers associated with this hba */
-	lpfc_stop_phba_timers(phba);
+	/* stop port and all timers associated with this hba */
+	lpfc_stop_port(phba);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_stop_vport_timers(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
 	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2046,7 +2239,7 @@
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->work_port_events = 0;
@@ -2139,6 +2332,10 @@
 	shost->max_lun = vport->cfg_max_luns;
 	shost->this_id = -1;
 	shost->max_cmd_len = 16;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+		shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+	}
 
 	/*
 	 * Set initial can_queue value since 0 is no longer supported and
@@ -2156,6 +2353,7 @@
 
 	/* Initialize all internally managed lists. */
 	INIT_LIST_HEAD(&vport->fc_nodes);
+	INIT_LIST_HEAD(&vport->rcv_buffer_list);
 	spin_lock_init(&vport->work_port_lock);
 
 	init_timer(&vport->fc_disctmo);
@@ -2347,192 +2545,501 @@
 }
 
 /**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
- * later when device is unloading, the driver should always call free_irq()
- * on all MSI-X vectors it has done request_irq() on before calling
- * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
- * will be left with MSI-X enabled and leaks its vectors.
- *
- * Return codes
- *   0 - sucessful
- *   other values - error
- **/
-static int
-lpfc_enable_msix(struct lpfc_hba *phba)
-{
-	int rc, i;
-	LPFC_MBOXQ_t *pmb;
-
-	/* Set up MSI-X multi-message vectors */
-	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
-		phba->msix_entries[i].entry = i;
-
-	/* Configure MSI-X capability structure */
-	rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
-				ARRAY_SIZE(phba->msix_entries));
-	if (rc) {
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0420 PCI enable MSI-X failed (%d)\n", rc);
-		goto msi_fail_out;
-	} else
-		for (i = 0; i < LPFC_MSIX_VECTORS; i++)
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0477 MSI-X entry[%d]: vector=x%x "
-					"message=%d\n", i,
-					phba->msix_entries[i].vector,
-					phba->msix_entries[i].entry);
-	/*
-	 * Assign MSI-X vectors to interrupt handlers
-	 */
-
-	/* vector-0 is associated to slow-path handler */
-	rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
-			 IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
-	if (rc) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"0421 MSI-X slow-path request_irq failed "
-				"(%d)\n", rc);
-		goto msi_fail_out;
-	}
-
-	/* vector-1 is associated to fast-path handler */
-	rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
-			 IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
-
-	if (rc) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"0429 MSI-X fast-path request_irq failed "
-				"(%d)\n", rc);
-		goto irq_fail_out;
-	}
-
-	/*
-	 * Configure HBA MSI-X attention conditions to messages
-	 */
-	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-
-	if (!pmb) {
-		rc = -ENOMEM;
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0474 Unable to allocate memory for issuing "
-				"MBOX_CONFIG_MSI command\n");
-		goto mem_fail_out;
-	}
-	rc = lpfc_config_msi(phba, pmb);
-	if (rc)
-		goto mbx_fail_out;
-	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
-	if (rc != MBX_SUCCESS) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
-				"0351 Config MSI mailbox command failed, "
-				"mbxCmd x%x, mbxStatus x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus);
-		goto mbx_fail_out;
-	}
-
-	/* Free memory allocated for mailbox command */
-	mempool_free(pmb, phba->mbox_mem_pool);
-	return rc;
-
-mbx_fail_out:
-	/* Free memory allocated for mailbox command */
-	mempool_free(pmb, phba->mbox_mem_pool);
-
-mem_fail_out:
-	/* free the irq already requested */
-	free_irq(phba->msix_entries[1].vector, phba);
-
-irq_fail_out:
-	/* free the irq already requested */
-	free_irq(phba->msix_entries[0].vector, phba);
-
-msi_fail_out:
-	/* Unconfigure MSI-X capability structure */
-	pci_disable_msix(phba->pcidev);
-	return rc;
-}
-
-/**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
  **/
 static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_stop_port_s3(struct lpfc_hba *phba)
 {
-	int i;
+	/* Clear all interrupt enable conditions */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	/* Clear all pending interrupts */
+	writel(0xffffffff, phba->HAregaddr);
+	readl(phba->HAregaddr); /* flush */
 
-	/* Free up MSI-X multi-message vectors */
-	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
-		free_irq(phba->msix_entries[i].vector, phba);
-	/* Disable MSI-X */
-	pci_disable_msix(phba->pcidev);
+	/* Reset some HBA SLI setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
 }
 
 /**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_stop_port_s4 - Stop SLI4 device port
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
+{
+	/* Reset some HBA SLI4 setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+	phba->sli4_hba.intr_enable = 0;
+	/* Hard clear it for now, shall have more graceful way to wait later */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
+
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
  *
- * Return codes
- * 	0 - sucessful
- * 	other values - error
- */
-static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+	phba->lpfc_stop_port(phba);
+}
+
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port.  This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+	uint32_t mbox_tmo, req_len;
+	uint32_t shdr_status, shdr_add_status;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2020 Failed to allocate mbox for ADD_FCF cmd\n");
+		return;
+	}
+
+	req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr);
+	rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			      LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+			      req_len, LPFC_SLI4_MBX_EMBED);
+	/*
+	 * In phase 1, there is a single FCF index, 0.  In phase2, the driver
+	 * supports multiple FCF indices.
+	 */
+	del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+	bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+	bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+	       phba->fcf.fcf_indx);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	}
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &del_fcf_record->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &del_fcf_record->header.cfg_shdr.response);
+	if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2516 DEL FCF of default FCF Index failed "
+				"mbx status x%x, status x%x add_status x%x\n",
+				rc, shdr_status, shdr_add_status);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+			   struct lpfc_acqe_link *acqe_link)
+{
+	uint16_t latt_fault;
+
+	switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+	case LPFC_ASYNC_LINK_FAULT_NONE:
+	case LPFC_ASYNC_LINK_FAULT_LOCAL:
+	case LPFC_ASYNC_LINK_FAULT_REMOTE:
+		latt_fault = 0;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0398 Invalid link fault code: x%x\n",
+				bf_get(lpfc_acqe_link_fault, acqe_link));
+		latt_fault = MBXERR_ERROR;
+		break;
+	}
+	return latt_fault;
+}
+
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+			  struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t att_type;
+
+	switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+	case LPFC_ASYNC_LINK_STATUS_DOWN:
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+		att_type = AT_LINK_DOWN;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_UP:
+		/* Ignore physical link up events - wait for logical link up */
+		att_type = AT_RESERVED;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+		att_type = AT_LINK_UP;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0399 Invalid link attention type: x%x\n",
+				bf_get(lpfc_acqe_link_status, acqe_link));
+		att_type = AT_RESERVED;
+		break;
+	}
+	return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+				struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t link_speed;
+
+	switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+	case LPFC_ASYNC_LINK_SPEED_ZERO:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_100MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_1GBPS:
+		link_speed = LA_1GHZ_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10GBPS:
+		link_speed = LA_10GHZ_LINK;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0483 Invalid link-attention link speed: x%x\n",
+				bf_get(lpfc_acqe_link_speed, acqe_link));
+		link_speed = LA_UNKNW_LINK;
+		break;
+	}
+	return link_speed;
+}
+
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_link *acqe_link)
+{
+	struct lpfc_dmabuf *mp;
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *mb;
+	READ_LA_VAR *la;
+	uint8_t att_type;
+
+	att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+	if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+		return;
+	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0395 The mboxq allocation failed\n");
+		return;
+	}
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!mp) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0396 The lpfc_dmabuf allocation failed\n");
+		goto out_free_pmb;
+	}
+	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+	if (!mp->virt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0397 The mbuf allocation failed\n");
+		goto out_free_dmabuf;
+	}
+
+	/* Cleanup any outstanding ELS commands */
+	lpfc_els_flush_all_cmd(phba);
+
+	/* Block ELS IOCBs until we have done process link event */
+	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+	/* Update link event statistics */
+	phba->sli.slistat.link_event++;
+
+	/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+	lpfc_read_la(phba, pmb, mp);
+	pmb->vport = phba->pport;
+
+	/* Parse and translate status field */
+	mb = &pmb->u.mb;
+	mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+	/* Parse and translate link attention fields */
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+	la->eventTag = acqe_link->event_tag;
+	la->attType = att_type;
+	la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+	/* Fake the the following irrelvant fields */
+	la->topology = TOPOLOGY_PT_PT;
+	la->granted_AL_PA = 0;
+	la->il = 0;
+	la->pb = 0;
+	la->fa = 0;
+	la->mm = 0;
+
+	/* Keep the link status for extra SLI4 state machine reference */
+	phba->sli4_hba.link_state.speed =
+				bf_get(lpfc_acqe_link_speed, acqe_link);
+	phba->sli4_hba.link_state.duplex =
+				bf_get(lpfc_acqe_link_duplex, acqe_link);
+	phba->sli4_hba.link_state.status =
+				bf_get(lpfc_acqe_link_status, acqe_link);
+	phba->sli4_hba.link_state.physical =
+				bf_get(lpfc_acqe_link_physical, acqe_link);
+	phba->sli4_hba.link_state.fault =
+				bf_get(lpfc_acqe_link_fault, acqe_link);
+
+	/* Invoke the lpfc_handle_latt mailbox command callback function */
+	lpfc_mbx_cmpl_read_la(phba, pmb);
+
+	return;
+
+out_free_dmabuf:
+	kfree(mp);
+out_free_pmb:
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous fcoe event.
+ **/
+static void
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_fcoe *acqe_fcoe)
+{
+	uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+	int rc;
+
+	switch (event_type) {
+	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2546 New FCF found index 0x%x tag 0x%x \n",
+			acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/*
+		 * If the current FCF is in discovered state,
+		 * do nothing.
+		 */
+		spin_lock_irq(&phba->hbalock);
+		if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+			spin_unlock_irq(&phba->hbalock);
+			break;
+		}
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Read the FCF table and re-discover SAN. */
+		rc = lpfc_sli4_read_fcf_record(phba,
+			LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+				"2547 Read FCF record failed 0x%x\n",
+				rc);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2548 FCF Table full count 0x%x tag 0x%x \n",
+			bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+			acqe_fcoe->event_tag);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2549 FCF disconnected fron network index 0x%x"
+			" tag 0x%x \n", acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/* If the event is not for currently used fcf do nothing */
+		if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+			break;
+		/*
+		 * Currently, driver support only one FCF - so treat this as
+		 * a link down.
+		 */
+		lpfc_linkdown(phba);
+		/* Unregister FCF if no devices connected to it */
+		lpfc_unregister_unused_fcf(phba);
+		break;
+
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0288 Unknown FCoE event type 0x%x event tag "
+			"0x%x\n", event_type, acqe_fcoe->event_tag);
+		break;
+	}
+}
+
+/**
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_dcbx *acqe_dcbx)
+{
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0290 The SLI4 DCBX asynchronous event is not "
+			"handled yet\n");
+}
+
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the async event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ASYNC_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the async events */
+	while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Process the asynchronous event */
+		switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+		case LPFC_TRAILER_CODE_LINK:
+			lpfc_sli4_async_link_evt(phba,
+						 &cq_event->cqe.acqe_link);
+			break;
+		case LPFC_TRAILER_CODE_FCOE:
+			lpfc_sli4_async_fcoe_evt(phba,
+						 &cq_event->cqe.acqe_fcoe);
+			break;
+		case LPFC_TRAILER_CODE_DCBX:
+			lpfc_sli4_async_dcbx_evt(phba,
+						 &cq_event->cqe.acqe_dcbx);
+			break;
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"1804 Invalid asynchrous event code: "
+					"x%x\n", bf_get(lpfc_trailer_code,
+					&cq_event->cqe.mcqe_cmpl));
+			break;
+		}
+		/* Free the completion event processed to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
+ * @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 {
 	int rc;
 
-	rc = pci_enable_msi(phba->pcidev);
-	if (!rc)
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0462 PCI enable MSI mode success.\n");
-	else {
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0471 PCI enable MSI mode failed (%d)\n", rc);
-		return rc;
-	}
+	/* Set up lpfc PCI-device group */
+	phba->pci_dev_grp = dev_grp;
 
-	rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
-			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
-	if (rc) {
-		pci_disable_msi(phba->pcidev);
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"0478 MSI request_irq failed (%d)\n", rc);
-	}
-	return rc;
-}
+	/* The LPFC_PCI_DEV_OC uses SLI4 */
+	if (dev_grp == LPFC_PCI_DEV_OC)
+		phba->sli_rev = LPFC_SLI_REV4;
 
-/**
- * lpfc_disable_msi - Disable MSI interrupt mode
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
- */
+	/* Set up device INIT API function jump table */
+	rc = lpfc_init_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SCSI API function jump table */
+	rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SLI API function jump table */
+	rc = lpfc_sli_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up MBOX API function jump table */
+	rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
 
-static void
-lpfc_disable_msi(struct lpfc_hba *phba)
-{
-	free_irq(phba->pcidev->irq, phba);
-	pci_disable_msi(phba->pcidev);
-	return;
+	return 0;
 }
 
 /**
@@ -2764,6 +3271,292 @@
 }
 
 /**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	int rc;
+	int i, hbq_count;
+
+	/* Before proceed, wait for POST done and device ready */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (rc)
+		return -ENODEV;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+	/*
+	 * We need to do a READ_CONFIG mailbox command here before
+	 * calling lpfc_get_cfgparam. For VFs this will report the
+	 * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+	 * All of the resources allocated
+	 * for this Port are tied to these values.
+	 */
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after the read_config mbox */
+	phba->max_vports = 0;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 * To insure that the scsi sgl does not cross a 4k page boundary only
+	 * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+	 * Table of sgl sizes and seg_cnt:
+	 * sgl size, 	sg_seg_cnt	total seg
+	 * 1k		50		52
+	 * 2k		114		116
+	 * 4k		242		244
+	 * 8k		498		500
+	 * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+	 * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+	 * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+	 * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+	 */
+	if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+		phba->cfg_sg_seg_cnt = 50;
+	else if (phba->cfg_sg_seg_cnt <= 114)
+		phba->cfg_sg_seg_cnt = 114;
+	else if (phba->cfg_sg_seg_cnt <= 242)
+		phba->cfg_sg_seg_cnt = 242;
+	else
+		phba->cfg_sg_seg_cnt = 498;
+
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+					+ sizeof(struct fcp_rsp);
+	phba->cfg_sg_dma_buf_size +=
+		((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+	/* Initialize buffer queue management fields */
+	hbq_count = lpfc_sli_hbq_count();
+	for (i = 0; i < hbq_count; ++i)
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+	 */
+	/* Initialize the Abort scsi buffer list used by driver */
+	spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+	/* This abort list used by worker thread */
+	spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+	/*
+	 * Initialize dirver internal slow-path work queues
+	 */
+
+	/* Driver internel slow-path CQ Event pool */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+	/* Response IOCB work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Asynchronous event CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+	/* Fast-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+	/* Slow-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+	/* Receive queue CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+	/* Initialize the driver internal SLI layer lists. */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+	if (rc)
+		return -ENOMEM;
+
+	/* Create the bootstrap mailbox command */
+	rc = lpfc_create_bootstrap_mbox(phba);
+	if (unlikely(rc))
+		goto out_free_mem;
+
+	/* Set up the host's endian order with the device. */
+	rc = lpfc_setup_endian_order(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Set up the hba's configuration parameters. */
+	rc = lpfc_sli4_read_config(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Perform a function reset */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Create all the SLI4 queues */
+	rc = lpfc_sli4_queue_create(phba);
+	if (rc)
+		goto out_free_bsmbx;
+
+	/* Create driver internal CQE event pool */
+	rc = lpfc_sli4_cq_event_pool_create(phba);
+	if (rc)
+		goto out_destroy_queue;
+
+	/* Initialize and populate the iocb list per host */
+	rc = lpfc_init_sgl_list(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1400 Failed to initialize sgl list.\n");
+		goto out_destroy_cq_event_pool;
+	}
+	rc = lpfc_init_active_sgl_array(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1430 Failed to initialize sgl list.\n");
+		goto out_free_sgl_list;
+	}
+
+	rc = lpfc_sli4_init_rpi_hdrs(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1432 Failed to initialize rpi headers.\n");
+		goto out_free_active_sgl;
+	}
+
+	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+				    phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_eq_hdl) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2572 Failed allocate memory for fast-path "
+				"per-EQ handle array\n");
+		goto out_remove_rpi_hdrs;
+	}
+
+	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+				      phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+	if (!phba->sli4_hba.msix_entries) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2573 Failed allocate memory for msi-x "
+				"interrupt vector entries\n");
+		goto out_free_fcp_eq_hdl;
+	}
+
+	return rc;
+
+out_free_fcp_eq_hdl:
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+	lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+	lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+	lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+	lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+	lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+	lpfc_mem_free(phba);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+	/* Free the default FCR table */
+	lpfc_sli_remove_dflt_fcf(phba);
+
+	/* Free memory allocated for msi-x interrupt vector entries */
+	kfree(phba->sli4_hba.msix_entries);
+
+	/* Free memory allocated for fast-path work queue handles */
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+
+	/* Free the allocated rpi headers. */
+	lpfc_sli4_remove_rpi_hdrs(phba);
+
+	/* Free the ELS sgl list */
+	lpfc_free_active_sgl(phba);
+	lpfc_free_sgl_list(phba);
+
+	/* Free the SCSI sgl management array */
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+	/* Free the SLI4 queues */
+	lpfc_sli4_queue_destroy(phba);
+
+	/* Free the completion queue EQ event pool */
+	lpfc_sli4_cq_event_release_all(phba);
+	lpfc_sli4_cq_event_pool_destroy(phba);
+
+	/* Reset SLI4 HBA FCoE function */
+	lpfc_pci_function_reset(phba);
+
+	/* Free the bsmbx region. */
+	lpfc_destroy_bootstrap_mbox(phba);
+
+	/* Free the SLI Layer memory with SLI4 HBAs */
+	lpfc_mem_free_all(phba);
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	return;
+}
+
+/**
  * lpfc_init_api_table_setup - Set up init api fucntion jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
@@ -2782,6 +3575,11 @@
 		phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
 		phba->lpfc_stop_port = lpfc_stop_port_s3;
 		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+		phba->lpfc_stop_port = lpfc_stop_port_s4;
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1431 Invalid HBA PCI-device group: 0x%x\n",
@@ -2956,6 +3754,346 @@
 }
 
 /**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	LIST_HEAD(sglq_list);
+	int rc = 0;
+
+	spin_lock_irq(&phba->hbalock);
+	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+				 &sglq_list, list) {
+		list_del(&sglq_entry->list);
+		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+		kfree(sglq_entry);
+		phba->sli4_hba.total_sglq_bufs--;
+	}
+	rc = lpfc_sli4_remove_all_sgl_pages(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2005 Unable to deregister pages from HBA: %x", rc);
+	}
+	kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+	int size;
+	size = sizeof(struct lpfc_sglq *);
+	size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+	phba->sli4_hba.lpfc_sglq_active_list =
+		kzalloc(size, GFP_KERNEL);
+	if (!phba->sli4_hba.lpfc_sglq_active_list)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL;
+	int i;
+	int els_xri_cnt;
+
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2400 lpfc_init_sgl_list els %d.\n",
+				els_xri_cnt);
+	/* Initialize and populate the sglq list per host/VF. */
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+	/* Sanity check on XRI management */
+	if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2562 No room left for SCSI XRI allocation: "
+				"max_xri=%d, els_xri=%d\n",
+				phba->sli4_hba.max_cfg_param.max_xri,
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for the ELS XRI management array */
+	phba->sli4_hba.lpfc_els_sgl_array =
+			kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+			GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_els_sgl_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2401 Failed to allocate memory for ELS "
+				"XRI management array of size %d.\n",
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Keep the SCSI XRI into the XRI management array */
+	phba->sli4_hba.scsi_xri_max =
+			phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+	phba->sli4_hba.scsi_xri_cnt = 0;
+
+	phba->sli4_hba.lpfc_scsi_psb_array =
+			kzalloc((sizeof(struct lpfc_scsi_buf *) *
+			phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2563 Failed to allocate memory for SCSI "
+				"XRI management array of size %d.\n",
+				phba->sli4_hba.scsi_xri_max);
+		kfree(phba->sli4_hba.lpfc_els_sgl_array);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < els_xri_cnt; i++) {
+		sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+		if (sglq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d sgls of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, els_xri_cnt);
+			goto out_free_mem;
+		}
+
+		sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (sglq_entry->sli4_xritag == NO_XRI) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate XRI.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->buff_type = GEN_BUFF_TYPE;
+		sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+		if (sglq_entry->virt == NULL) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->sgl = sglq_entry->virt;
+		memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+		/* The list order is used by later block SGL registraton */
+		spin_lock_irq(&phba->hbalock);
+		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+		phba->sli4_hba.total_sglq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return 0;
+
+out_free_mem:
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+	lpfc_free_sgl_list(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	int longs;
+	uint16_t rpi_count;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * Provision an rpi bitmask range for discovery. The total count
+	 * is the difference between max and base + 1.
+	 */
+	rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+					   GFP_KERNEL);
+	if (!phba->sli4_hba.rpi_bmask)
+		return -ENOMEM;
+
+	rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+	if (!rpi_hdr) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0391 Error during rpi post operation\n");
+		lpfc_sli4_remove_rpis(phba);
+		rc = -ENODEV;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba.  This single region
+ * provides support for up to 64 rpis.  The region is used globally
+ * by the device.
+ *
+ * Returns:
+ *   A valid rpi hdr on success.
+ *   A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+	uint16_t rpi_limit, curr_rpi_range;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	spin_lock_irq(&phba->hbalock);
+	curr_rpi_range = phba->sli4_hba.next_rpi;
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * The port has a limited number of rpis. The increment here
+	 * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+	 * and to allow the full max_rpi range per port.
+	 */
+	if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+		return NULL;
+
+	/*
+	 * First allocate the protocol header region for the port.  The
+	 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+	 */
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return NULL;
+
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  LPFC_HDR_TEMPLATE_SIZE,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		rpi_hdr = NULL;
+		goto err_free_dmabuf;
+	}
+
+	memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+	if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+		rpi_hdr = NULL;
+		goto err_free_coherent;
+	}
+
+	/* Save the rpi header data for cleanup later. */
+	rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+	if (!rpi_hdr)
+		goto err_free_coherent;
+
+	rpi_hdr->dmabuf = dmabuf;
+	rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+	rpi_hdr->page_count = 1;
+	spin_lock_irq(&phba->hbalock);
+	rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+	list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * The next_rpi stores the next module-64 rpi value to post
+	 * in any subsequent rpi memory region postings.
+	 */
+	phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+	spin_unlock_irq(&phba->hbalock);
+	return rpi_hdr;
+
+ err_free_coherent:
+	dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+			  dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+	kfree(dmabuf);
+	return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+	list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+				 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		list_del(&rpi_hdr->list);
+		dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+				  rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+		kfree(rpi_hdr->dmabuf);
+		kfree(rpi_hdr);
+	}
+
+	phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+	memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
  * lpfc_hba_alloc - Allocate driver hba data structure for a device.
  * @pdev: pointer to pci device data structure.
  *
@@ -3316,6 +4454,1542 @@
 }
 
 /**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+	struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+	uint32_t onlnreg0, onlnreg1;
+	int i, port_error = -ENODEV;
+
+	if (!phba->sli4_hba.STAregaddr)
+		return -ENODEV;
+
+	/* With uncoverable error, log the error message and return error */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+		uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1422 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerrlo_reg.word0, uerrhi_reg.word0,
+					onlnreg0, onlnreg1);
+		}
+		return -ENODEV;
+	}
+
+	/* Wait up to 30 seconds for the SLI Port POST done and ready */
+	for (i = 0; i < 3000; i++) {
+		sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+		/* Encounter fatal POST error, break out */
+		if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+			port_error = -ENODEV;
+			break;
+		}
+		if (LPFC_POST_STAGE_ARMFW_READY ==
+		    bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+			port_error = 0;
+			break;
+		}
+		msleep(10);
+	}
+
+	if (port_error)
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"1408 Failure HBA POST Status: sta_reg=0x%x, "
+			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+			"dl=x%x, pstatus=x%x\n", sta_reg.word0,
+			bf_get(lpfc_hst_state_perr, &sta_reg),
+			bf_get(lpfc_hst_state_sfi, &sta_reg),
+			bf_get(lpfc_hst_state_nip, &sta_reg),
+			bf_get(lpfc_hst_state_ipc, &sta_reg),
+			bf_get(lpfc_hst_state_xrom, &sta_reg),
+			bf_get(lpfc_hst_state_dl, &sta_reg),
+			bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+	/* Log device information */
+	scratchpad.word0 =  readl(phba->sli4_hba.SCRATCHPADregaddr);
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+			"FeatureL1=0x%x, FeatureL2=0x%x\n",
+			bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+			bf_get(lpfc_scratchpad_slirev, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+	return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+	phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_LO;
+	phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_HI;
+	phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE0;
+	phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE1;
+	phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+	phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_STATE;
+	phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_ISR0;
+	phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_IMR0;
+	phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				     LPFC_HST_ISCR0;
+	return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+	if (vf > LPFC_VIR_FUNC_MAX)
+		return -ENODEV;
+
+	phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+	phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+	phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+	phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+	phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+	return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec.  This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs.  No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	uint32_t bmbx_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address *dma_address;
+	uint32_t pa_addr;
+	uint64_t phys_addr;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * The bootstrap mailbox region is comprised of 2 parts
+	 * plus an alignment restriction of 16 bytes.
+	 */
+	bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  bmbx_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, bmbx_size);
+
+	/*
+	 * Initialize the bootstrap mailbox pointers now so that the register
+	 * operations are simple later.  The mailbox dma address is required
+	 * to be 16-byte aligned.  Also align the virtual memory as each
+	 * maibox is copied into the bmbx mailbox region before issuing the
+	 * command to the port.
+	 */
+	phba->sli4_hba.bmbx.dmabuf = dmabuf;
+	phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+	phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+					      LPFC_ALIGN_16_BYTE);
+	phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+					      LPFC_ALIGN_16_BYTE);
+
+	/*
+	 * Set the high and low physical addresses now.  The SLI4 alignment
+	 * requirement is 16 bytes and the mailbox is posted to the port
+	 * as two 30-bit addresses.  The other data is a bit marking whether
+	 * the 30-bit address is the high or low address.
+	 * Upcast bmbx aphys to 64bits so shift instruction compiles
+	 * clean on 32 bit machines.
+	 */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+	pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+	dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_HI);
+
+	pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+	dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_LO);
+	return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	dma_free_coherent(&phba->pcidev->dev,
+			  phba->sli4_hba.bmbx.bmbx_size,
+			  phba->sli4_hba.bmbx.dmabuf->virt,
+			  phba->sli4_hba.bmbx.dmabuf->phys);
+
+	kfree(phba->sli4_hba.bmbx.dmabuf);
+	memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb;
+	struct lpfc_mbx_read_config *rd_config;
+	uint32_t rc = 0;
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2011 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	lpfc_read_config(phba, pmb);
+
+	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2012 Mailbox failed , mbxCmd x%x "
+			"READ_CONFIG, mbxStatus x%x\n",
+			bf_get(lpfc_mqe_command, &pmb->u.mqe),
+			bf_get(lpfc_mqe_status, &pmb->u.mqe));
+		rc = -EIO;
+	} else {
+		rd_config = &pmb->u.mqe.un.rd_config;
+		phba->sli4_hba.max_cfg_param.max_xri =
+			bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		phba->sli4_hba.max_cfg_param.xri_base =
+			bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vpi =
+			bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vpi_base =
+			bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rpi =
+			bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.rpi_base =
+			bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vfi =
+			bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vfi_base =
+			bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_fcfi =
+			bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.fcfi_base =
+			bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_eq =
+			bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rq =
+			bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_wq =
+			bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_cq =
+			bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+		phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+		phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+		phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+		phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+		phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+		phba->max_vports = phba->max_vpi;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2003 cfg params XRI(B:%d M:%d), "
+				"VPI(B:%d M:%d) "
+				"VFI(B:%d M:%d) "
+				"RPI(B:%d M:%d) "
+				"FCFI(B:%d M:%d)\n",
+				phba->sli4_hba.max_cfg_param.xri_base,
+				phba->sli4_hba.max_cfg_param.max_xri,
+				phba->sli4_hba.max_cfg_param.vpi_base,
+				phba->sli4_hba.max_cfg_param.max_vpi,
+				phba->sli4_hba.max_cfg_param.vfi_base,
+				phba->sli4_hba.max_cfg_param.max_vfi,
+				phba->sli4_hba.max_cfg_param.rpi_base,
+				phba->sli4_hba.max_cfg_param.max_rpi,
+				phba->sli4_hba.max_cfg_param.fcfi_base,
+				phba->sli4_hba.max_cfg_param.max_fcfi);
+	}
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
+	if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+		phba->cfg_hba_queue_depth =
+				phba->sli4_hba.max_cfg_param.max_xri;
+	return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+				      HOST_ENDIAN_HIGH_WORD1};
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0492 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+	 * words to contain special data values and no other data.
+	 */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0493 SLI_CONFIG_SPECIAL mailbox failed with "
+				"status x%x\n",
+				rc);
+		rc = -EIO;
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+	struct lpfc_queue *qdesc;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int cfg_fcp_wq_count;
+	int cfg_fcp_eq_count;
+
+	/*
+	 * Sanity check for confiugred queue parameters against the run-time
+	 * device parameters
+	 */
+
+	/* Sanity check on FCP fast-path WQ parameters */
+	cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+	if (cfg_fcp_wq_count >
+	    (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+		cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+				   LPFC_SP_WQN_DEF;
+		if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2581 Not enough WQs (%d) from "
+					"the pci function for supporting "
+					"FCP WQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_wq,
+					phba->cfg_fcp_wq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2582 Not enough WQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP WQs (%d), the actual FCP WQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_wq,
+				phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+	}
+	/* The actual number of FCP work queues adopted */
+	phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+	/* Sanity check on FCP fast-path EQ parameters */
+	cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+	if (cfg_fcp_eq_count >
+	    (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+		cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+				   LPFC_SP_EQN_DEF;
+		if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2574 Not enough EQs (%d) from the "
+					"pci function for supporting FCP "
+					"EQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_eq,
+					phba->cfg_fcp_eq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2575 Not enough EQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP EQs (%d), the actual FCP EQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_eq,
+				phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+	}
+	/* It does not make sense to have more EQs than WQs */
+	if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2593 The number of FCP EQs (%d) is more "
+				"than the number of FCP WQs (%d), take "
+				"the number of FCP EQs same as than of "
+				"WQs (%d)\n", cfg_fcp_eq_count,
+				phba->cfg_fcp_wq_count,
+				phba->cfg_fcp_wq_count);
+		cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+	}
+	/* The actual number of FCP event queues adopted */
+	phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+	/* The overall number of event queues used */
+	phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+	/*
+	 * Create Event Queues (EQs)
+	 */
+
+	/* Get EQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+	phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+	/* Create slow path event queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+				      phba->sli4_hba.eq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0496 Failed allocate slow-path EQ\n");
+		goto out_error;
+	}
+	phba->sli4_hba.sp_eq = qdesc;
+
+	/* Create fast-path FCP Event Queue(s) */
+	phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+			       phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2576 Failed allocate memory for fast-path "
+				"EQ record array\n");
+		goto out_free_sp_eq;
+	}
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+					      phba->sli4_hba.eq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0497 Failed allocate fast-path EQ\n");
+			goto out_free_fp_eq;
+		}
+		phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+	}
+
+	/*
+	 * Create Complete Queues (CQs)
+	 */
+
+	/* Get CQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+	/* Create slow-path Mailbox Command Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0500 Failed allocate slow-path mailbox CQ\n");
+		goto out_free_fp_eq;
+	}
+	phba->sli4_hba.mbx_cq = qdesc;
+
+	/* Create slow-path ELS Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0501 Failed allocate slow-path ELS CQ\n");
+		goto out_free_mbx_cq;
+	}
+	phba->sli4_hba.els_cq = qdesc;
+
+	/* Create slow-path Unsolicited Receive Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0502 Failed allocate slow-path USOL RX CQ\n");
+		goto out_free_els_cq;
+	}
+	phba->sli4_hba.rxq_cq = qdesc;
+
+	/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+	phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2577 Failed allocate memory for fast-path "
+				"CQ record array\n");
+		goto out_free_rxq_cq;
+	}
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+					      phba->sli4_hba.cq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0499 Failed allocate fast-path FCP "
+					"CQ (%d)\n", fcp_cqidx);
+			goto out_free_fcp_cq;
+		}
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+	}
+
+	/* Create Mailbox Command Queue */
+	phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+	phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+				      phba->sli4_hba.mq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0505 Failed allocate slow-path MQ\n");
+		goto out_free_fcp_cq;
+	}
+	phba->sli4_hba.mbx_wq = qdesc;
+
+	/*
+	 * Create all the Work Queues (WQs)
+	 */
+	phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+	phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+	/* Create slow-path ELS Work Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+				      phba->sli4_hba.wq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0504 Failed allocate slow-path ELS WQ\n");
+		goto out_free_mbx_wq;
+	}
+	phba->sli4_hba.els_wq = qdesc;
+
+	/* Create fast-path FCP Work Queue(s) */
+	phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_wq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2578 Failed allocate memory for fast-path "
+				"WQ record array\n");
+		goto out_free_els_wq;
+	}
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+					      phba->sli4_hba.wq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0503 Failed allocate fast-path FCP "
+					"WQ (%d)\n", fcp_wqidx);
+			goto out_free_fcp_wq;
+		}
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+	phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+	/* Create Receive Queue for header */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0506 Failed allocate receive HRQ\n");
+		goto out_free_fcp_wq;
+	}
+	phba->sli4_hba.hdr_rq = qdesc;
+
+	/* Create Receive Queue for data */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0507 Failed allocate receive DRQ\n");
+		goto out_free_hdr_rq;
+	}
+	phba->sli4_hba.dat_rq = qdesc;
+
+	return 0;
+
+out_free_hdr_rq:
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+		phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+out_error:
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Release mailbox command work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+
+	/* Release ELS work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+
+	/* Release FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_wq);
+	phba->sli4_hba.fcp_wq = NULL;
+
+	/* Release unsolicited receive queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+	lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+	phba->sli4_hba.dat_rq = NULL;
+
+	/* Release unsolicited receive complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+
+	/* Release ELS complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+
+	/* Release mailbox command complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+
+	/* Release FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_cq);
+	phba->sli4_hba.fcp_cq = NULL;
+
+	/* Release fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+	kfree(phba->sli4_hba.fp_eq);
+	phba->sli4_hba.fp_eq = NULL;
+
+	/* Release slow-path event queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+	int rc = -ENOMEM;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int fcp_cq_index = 0;
+
+	/*
+	 * Set up Event Queues (EQs)
+	 */
+
+	/* Set up slow-path event queue */
+	if (!phba->sli4_hba.sp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0520 Slow-path EQ not allocated\n");
+		goto out_error;
+	}
+	rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+			    LPFC_SP_DEF_IMAX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0521 Failed setup of slow-path EQ: "
+				"rc = 0x%x\n", rc);
+		goto out_error;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2583 Slow-path EQ setup: queue-id=%d\n",
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path event queue */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0522 Fast-path EQ (%d) not "
+					"allocated\n", fcp_eqidx);
+			goto out_destroy_fp_eq;
+		}
+		rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+				    phba->cfg_fcp_imax);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0523 Failed setup of fast-path EQ "
+					"(%d), rc = 0x%x\n", fcp_eqidx, rc);
+			goto out_destroy_fp_eq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2584 Fast-path EQ setup: "
+				"queue[%d]-id=%d\n", fcp_eqidx,
+				phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+	}
+
+	/*
+	 * Set up Complete Queues (CQs)
+	 */
+
+	/* Set up slow-path MBOX Complete Queue as the first CQ */
+	if (!phba->sli4_hba.mbx_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0528 Mailbox CQ not allocated\n");
+		goto out_destroy_fp_eq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+			    LPFC_MCQ, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0529 Failed setup of slow-path mailbox CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fp_eq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.mbx_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path ELS Complete Queue */
+	if (!phba->sli4_hba.els_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0530 ELS CQ not allocated\n");
+		goto out_destroy_mbx_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+			    LPFC_WCQ, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0531 Failed setup of slow-path ELS CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.els_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path Unsolicited Receive Complete Queue */
+	if (!phba->sli4_hba.rxq_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0532 USOL RX CQ not allocated\n");
+		goto out_destroy_els_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+			    LPFC_RCQ, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0533 Failed setup of slow-path USOL RX CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_els_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.rxq_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path FCP Response Complete Queue */
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0526 Fast-path FCP CQ (%d) not "
+					"allocated\n", fcp_cqidx);
+			goto out_destroy_fcp_cq;
+		}
+		rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+				    phba->sli4_hba.fp_eq[fcp_cqidx],
+				    LPFC_WCQ, LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0527 Failed setup of fast-path FCP "
+					"CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+			goto out_destroy_fcp_cq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2588 FCP CQ setup: cq[%d]-id=%d, "
+				"parent eq[%d]-id=%d\n",
+				fcp_cqidx,
+				phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+				fcp_cqidx,
+				phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+	}
+
+	/*
+	 * Set up all the Work Queues (WQs)
+	 */
+
+	/* Set up Mailbox Command Queue */
+	if (!phba->sli4_hba.mbx_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0538 Slow-path MQ not allocated\n");
+		goto out_destroy_fcp_cq;
+	}
+	rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+			    phba->sli4_hba.mbx_cq, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0539 Failed setup of slow-path MQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.mbx_wq->queue_id,
+			phba->sli4_hba.mbx_cq->queue_id);
+
+	/* Set up slow-path ELS Work Queue */
+	if (!phba->sli4_hba.els_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0536 Slow-path ELS WQ not allocated\n");
+		goto out_destroy_mbx_wq;
+	}
+	rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+			    phba->sli4_hba.els_cq, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0537 Failed setup of slow-path ELS WQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.els_wq->queue_id,
+			phba->sli4_hba.els_cq->queue_id);
+
+	/* Set up fast-path FCP Work Queue */
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0534 Fast-path FCP WQ (%d) not "
+					"allocated\n", fcp_wqidx);
+			goto out_destroy_fcp_wq;
+		}
+		rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+				    phba->sli4_hba.fcp_cq[fcp_cq_index],
+				    LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0535 Failed setup of fast-path FCP "
+					"WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+			goto out_destroy_fcp_wq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2591 FCP WQ setup: wq[%d]-id=%d, "
+				"parent cq[%d]-id=%d\n",
+				fcp_wqidx,
+				phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+				fcp_cq_index,
+				phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+		/* Round robin FCP Work Queue's Completion Queue assignment */
+		fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0540 Receive Queue not allocated\n");
+		goto out_destroy_fcp_wq;
+	}
+	rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			    phba->sli4_hba.rxq_cq, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0541 Failed setup of Receive Queue: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+			"parent cq-id=%d\n",
+			phba->sli4_hba.hdr_rq->queue_id,
+			phba->sli4_hba.dat_rq->queue_id,
+			phba->sli4_hba.rxq_cq->queue_id);
+	return 0;
+
+out_destroy_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Unset mailbox command work queue */
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+	/* Unset ELS work queue */
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+	/* Unset unsolicited receive queue */
+	lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+	/* Unset FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+	/* Unset mailbox command complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+	/* Unset ELS complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+	/* Unset unsolicited receive complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+	/* Unset FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+	/* Unset fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+	/* Unset slow-path event queue */
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ *   - Mailbox asynchronous events
+ *   - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	int i;
+
+	for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+		cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+		if (!cq_event)
+			goto out_pool_create_fail;
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_cqe_event_pool);
+	}
+	return 0;
+
+out_pool_create_fail:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event, *next_cq_event;
+
+	list_for_each_entry_safe(cq_event, next_cq_event,
+				 &phba->sli4_hba.sp_cqe_event_pool, list) {
+		list_del(&cq_event->list);
+		kfree(cq_event);
+	}
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event = NULL;
+
+	list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+			 struct lpfc_cq_event, list);
+	return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cq_event = __lpfc_sli4_cq_event_alloc(phba);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			     struct lpfc_cq_event *cq_event)
+{
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			   struct lpfc_cq_event *cq_event)
+{
+	unsigned long iflags;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_sli4_cq_event_release(phba, cq_event);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cqelist);
+	struct lpfc_cq_event *cqe;
+	unsigned long iflags;
+
+	/* Retrieve all the pending WCQEs from pending WCQE lists */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Pending FCP XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending ELS XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending asynnc events */
+	list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+			 &cqelist);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	while (!list_empty(&cqelist)) {
+		list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+		lpfc_sli4_cq_event_release(phba, cqe);
+	}
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0494 Unable to allocate memory for issuing "
+				"SLI_FUNCTION_RESET mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+			 LPFC_SLI4_MBX_EMBED);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0495 SLI_FUNCTION_RESET mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int length, cmdsent;
+	uint32_t mbox_tmo;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (cnt == 0) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2518 Requested to send 0 NOP mailbox cmd\n");
+		return cnt;
+	}
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2519 Unable to allocate memory for issuing "
+				"NOP mailbox command\n");
+		return 0;
+	}
+
+	/* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+	length = (sizeof(struct lpfc_mbx_nop) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+		if (!phba->sli4_hba.intr_enable)
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		else
+			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+		if (rc == MBX_TIMEOUT)
+			break;
+		/* Check return status */
+		shdr = (union lpfc_sli4_cfg_shdr *)
+			&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+					 &shdr->response);
+		if (shdr_status || shdr_add_status || rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"2520 NOP mailbox command failed "
+					"status x%x add_status x%x mbx "
+					"status x%x\n", shdr_status,
+					shdr_add_status, rc);
+			break;
+		}
+	}
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+
+	return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+	LPFC_MBOXQ_t *mbox;
+	uint32_t mbox_tmo;
+	int rc;
+	unsigned long flags;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+	if (!mbox)
+		return;
+
+	lpfc_unreg_fcfi(mbox, fcfi);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2517 Unregister FCFI command failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mbox->u.mqe));
+	else {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		/* Mark the FCFI is no longer registered */
+		phba->fcf.fcf_flag &=
+			~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+	}
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar1map_len, bar2map_len;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+	 * number of bytes required by each mapping. They are actually
+	 * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+	bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+	phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+	bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+	bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+	/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+	phba->sli4_hba.conf_regs_memmap_p =
+				ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->sli4_hba.conf_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 PCI config registers.\n");
+		goto out;
+	}
+
+	/* Map SLI4 HBA Control Register base to a kernel virtual address. */
+	phba->sli4_hba.ctrl_regs_memmap_p =
+				ioremap(phba->pci_bar1_map, bar1map_len);
+	if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA control registers.\n");
+		goto out_iounmap_conf;
+	}
+
+	/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+	phba->sli4_hba.drbl_regs_memmap_p =
+				ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->sli4_hba.drbl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA doorbell registers.\n");
+		goto out_iounmap_ctrl;
+	}
+
+	/* Set up BAR0 PCI config space register memory map */
+	lpfc_sli4_bar0_register_memmap(phba);
+
+	/* Set up BAR1 register memory map */
+	lpfc_sli4_bar1_register_memmap(phba);
+
+	/* Set up BAR2 register memory map */
+	error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+	if (error)
+		goto out_iounmap_all;
+
+	return 0;
+
+out_iounmap_all:
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+
+	/* Unmap I/O memory space */
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+	return;
+}
+
+/**
  * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
  * @phba: pointer to lpfc hba data structure.
  *
@@ -3597,6 +6271,276 @@
 }
 
 /**
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	/* Set up MSI-X multi-message vectors */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+		phba->sli4_hba.msix_entries[index].entry = index;
+
+	/* Configure MSI-X capability structure */
+	rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+			     phba->sli4_hba.cfg_eqn);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0484 PCI enable MSI-X failed (%d)\n", rc);
+		goto msi_fail_out;
+	}
+	/* Log MSI-X vector assignment */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0489 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", index,
+				phba->sli4_hba.msix_entries[index].vector,
+				phba->sli4_hba.msix_entries[index].entry);
+	/*
+	 * Assign MSI-X vectors to interrupt handlers
+	 */
+
+	/* The first vector must associated to slow-path handler for MQ */
+	rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+			 &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0485 MSI-X slow-path request_irq failed "
+				"(%d)\n", rc);
+		goto msi_fail_out;
+	}
+
+	/* The rest of the vector(s) are associated to fast-path handler(s) */
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+		phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+		rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+				 &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+				 LPFC_FP_DRIVER_HANDLER_NAME,
+				 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"0486 MSI-X fast-path (%d) "
+					"request_irq failed (%d)\n", index, rc);
+			goto cfg_fail_out;
+		}
+	}
+
+	return rc;
+
+cfg_fail_out:
+	/* free the irq already requested */
+	for (--index; index >= 1; index--)
+		free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+	/* free the irq already requested */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+	/* Unconfigure MSI-X capability structure */
+	pci_disable_msix(phba->pcidev);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
+{
+	int index;
+
+	/* Free up MSI-X multi-message vectors */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+		free_irq(phba->sli4_hba.msix_entries[index].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+	/* Disable MSI-X */
+	pci_disable_msix(phba->pcidev);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	rc = pci_enable_msi(phba->pcidev);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0487 PCI enable MSI mode success.\n");
+	else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0488 PCI enable MSI mode failed (%d)\n", rc);
+		return rc;
+	}
+
+	rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+	if (rc) {
+		pci_disable_msi(phba->pcidev);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0490 MSI request_irq failed (%d)\n", rc);
+	}
+
+	for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+		phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+	free_irq(phba->pcidev->irq, phba);
+	pci_disable_msi(phba->pcidev);
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static uint32_t
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+	uint32_t intr_mode = LPFC_INTR_ERROR;
+	int retval, index;
+
+	if (cfg_mode == 2) {
+		/* Preparation before conf_msi mbox cmd */
+		retval = 0;
+		if (!retval) {
+			/* Now, try to enable MSI-X interrupt mode */
+			retval = lpfc_sli4_enable_msix(phba);
+			if (!retval) {
+				/* Indicate initialization to MSI-X mode */
+				phba->intr_type = MSIX;
+				intr_mode = 2;
+			}
+		}
+	}
+
+	/* Fallback to MSI if MSI-X initialization failed */
+	if (cfg_mode >= 1 && phba->intr_type == NONE) {
+		retval = lpfc_sli4_enable_msi(phba);
+		if (!retval) {
+			/* Indicate initialization to MSI mode */
+			phba->intr_type = MSI;
+			intr_mode = 1;
+		}
+	}
+
+	/* Fallback to INTx if both MSI-X/MSI initalization failed */
+	if (phba->intr_type == NONE) {
+		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+		if (!retval) {
+			/* Indicate initialization to INTx mode */
+			phba->intr_type = INTx;
+			intr_mode = 0;
+			for (index = 0; index < phba->cfg_fcp_eq_count;
+			     index++) {
+				phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+				phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+			}
+		}
+	}
+	return intr_mode;
+}
+
+/**
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
+ **/
+static void
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
+{
+	/* Disable the currently initialized interrupt mode */
+	if (phba->intr_type == MSIX)
+		lpfc_sli4_disable_msix(phba);
+	else if (phba->intr_type == MSI)
+		lpfc_sli4_disable_msi(phba);
+	else if (phba->intr_type == INTx)
+		free_irq(phba->pcidev->irq, phba);
+
+	/* Reset interrupt management states */
+	phba->intr_type = NONE;
+	phba->sli.slistat.sli_intr = 0;
+
+	return;
+}
+
+/**
  * lpfc_unset_hba - Unset SLI3 hba device initialization
  * @phba: pointer to lpfc hba data structure.
  *
@@ -3627,6 +6571,90 @@
 }
 
 /**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
+
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
+
+	phba->pport->work_port_events = 0;
+
+	lpfc_sli4_hba_down(phba);
+
+	lpfc_sli4_disable_intr(phba);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+	int wait_cnt = 0;
+	LPFC_MBOXQ_t *mboxq;
+
+	lpfc_stop_hba_timers(phba);
+	phba->sli4_hba.intr_enable = 0;
+
+	/*
+	 * Gracefully wait out the potential current outstanding asynchronous
+	 * mailbox command.
+	 */
+
+	/* First, block any pending async mailbox command from posted */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, trying to wait it out if we can */
+	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		msleep(10);
+		if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+			break;
+	}
+	/* Forcefully release the outstanding mailbox command if timed out */
+	if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_lock_irq(&phba->hbalock);
+		mboxq = phba->sli.mbox_active;
+		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		__lpfc_mbox_cmpl_put(phba, mboxq);
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
+
+	/* Disable PCI subsystem interrupt */
+	lpfc_sli4_disable_intr(phba);
+
+	/* Stop kthread signal shall trigger work_done one more time */
+	kthread_stop(phba->worker_thread);
+
+	/* Stop the SLI4 device port */
+	phba->pport->work_port_events = 0;
+}
+
+/**
  * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
@@ -4127,6 +7155,446 @@
 }
 
 /**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+	int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+	if (max_xri <= 100)
+		return 4;
+	else if (max_xri <= 256)
+		return 8;
+	else if (max_xri <= 512)
+		return 16;
+	else if (max_xri <= 1024)
+		return 32;
+	else
+		return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
+	int mcnt;
+
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
+
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1409 Failed to enable pci device.\n");
+		goto out_free_phba;
+	}
+
+	/* Set up SLI API function jump table for PCI-device group-1 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+	if (error)
+		goto out_disable_pci_dev;
+
+	/* Set up SLI-4 specific device PCI memory space */
+	error = lpfc_sli4_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1410 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
+
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1411 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Set up SLI-4 Specific device driver resources */
+	error = lpfc_sli4_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1412 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba,
+			phba->sli4_hba.max_cfg_param.max_xri);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1413 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s4;
+	}
+
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1414 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
+
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1415 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
+
+	/* Configure sysfs attributes */
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1416 Failed to allocate sysfs attr\n");
+		goto out_destroy_shost;
+	}
+
+	/* Now, trying to enable interrupt and bring up the device */
+	cfg_mode = phba->cfg_use_msi;
+	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
+		/* Configure and enable interrupt */
+		intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+		if (intr_mode == LPFC_INTR_ERROR) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0426 Failed to enable interrupt.\n");
+			error = -ENODEV;
+			goto out_free_sysfs_attr;
+		}
+		/* Set up SLI-4 HBA */
+		if (lpfc_sli4_hba_setup(phba)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1421 Failed to set up hba\n");
+			error = -ENODEV;
+			goto out_disable_intr;
+		}
+
+		/* Send NOP mbx cmds for non-INTx mode active interrupt test */
+		if (intr_mode != 0)
+			mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+							    LPFC_ACT_INTR_CNT);
+
+		/* Check active interrupts received only for MSI/MSI-X */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+			/* Log the current active interrupt mode */
+			phba->intr_mode = intr_mode;
+			lpfc_log_intr_mode(phba, intr_mode);
+			break;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0451 Configure interrupt mode (%d) "
+				"failed active interrupt test.\n",
+				intr_mode);
+		/* Unset the preivous SLI-4 HBA setup */
+		lpfc_sli4_unset_hba(phba);
+		/* Try next level of interrupt mode */
+		cfg_mode = --intr_mode;
+	}
+
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
+
+	return 0;
+
+out_disable_intr:
+	lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+	lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+	lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+	lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
+out_free_phba:
+	lpfc_hba_free(phba);
+	return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_vport **vports;
+	struct lpfc_hba *phba = vport->phba;
+	int i;
+
+	/* Mark the device unloading flag */
+	spin_lock_irq(&phba->hbalock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Free the HBA sysfs attributes */
+	lpfc_free_sysfs_attr(vport);
+
+	/* Release all the vports against this physical port */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+			fc_vport_terminate(vports[i]->fc_vport);
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Remove FC host and then SCSI host with the physical port */
+	fc_remove_host(shost);
+	scsi_remove_host(shost);
+
+	/* Perform cleanup on the physical port */
+	lpfc_cleanup(vport);
+
+	/*
+	 * Bring down the SLI Layer. This step disables all interrupts,
+	 * clears the rings, discards all mailbox commands, and resets
+	 * the HBA FCoE function.
+	 */
+	lpfc_debugfs_terminate(vport);
+	lpfc_sli4_hba_unset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	list_del_init(&vport->listentry);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+	 * buffers are released to their corresponding pools here.
+	 */
+	lpfc_scsi_free(phba);
+	lpfc_sli4_driver_resource_unset(phba);
+
+	/* Unmap adapter Control and Doorbell registers */
+	lpfc_sli4_pci_mem_unset(phba);
+
+	/* Release PCI resources and disable device's PCI function */
+	scsi_host_put(shost);
+	lpfc_disable_pci_dev(phba);
+
+	/* Finally, free the driver's device data structure */
+	lpfc_hba_free(phba);
+
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0298 PCI device Power Management suspend.\n");
+
+	/* Bring down the device */
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	kthread_stop(phba->worker_thread);
+
+	/* Disable interrupt from device */
+	lpfc_sli4_disable_intr(phba);
+
+	/* Save device state to PCI config space */
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	uint32_t intr_mode;
+	int error;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0292 PCI device Power Management resume.\n");
+
+	/* Restore device state from PCI config space */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	if (pdev->is_busmaster)
+		pci_set_master(pdev);
+
+	 /* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					"lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0293 PM resume failed to start worker "
+				"thread: error=x%x.\n", error);
+		return error;
+	}
+
+	/* Configure and enable interrupt */
+	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+	if (intr_mode == LPFC_INTR_ERROR) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0294 PM resume Failed to enable interrupt\n");
+		return -EIO;
+	} else
+		phba->intr_mode = intr_mode;
+
+	/* Restart HBA and bring it online */
+	lpfc_sli_brdrestart(phba);
+	lpfc_online(phba);
+
+	/* Log the current active interrupt mode */
+	lpfc_log_intr_mode(phba, phba->intr_mode);
+
+	return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+	return;
+}
+
+/**
  * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
@@ -4154,6 +7622,10 @@
 		return -ENODEV;
 
 	switch (dev_id) {
+	case PCI_DEVICE_ID_TIGERSHARK:
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		rc = lpfc_pci_probe_one_s4(pdev, pid);
+		break;
 	default:
 		rc = lpfc_pci_probe_one_s3(pdev, pid);
 		break;
@@ -4181,6 +7653,9 @@
 	case LPFC_PCI_DEV_LP:
 		lpfc_pci_remove_one_s3(pdev);
 		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_pci_remove_one_s4(pdev);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1424 Invalid PCI device group: 0x%x\n",
@@ -4215,6 +7690,9 @@
 	case LPFC_PCI_DEV_LP:
 		rc = lpfc_pci_suspend_one_s3(pdev, msg);
 		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_suspend_one_s4(pdev, msg);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1425 Invalid PCI device group: 0x%x\n",
@@ -4248,6 +7726,9 @@
 	case LPFC_PCI_DEV_LP:
 		rc = lpfc_pci_resume_one_s3(pdev);
 		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_resume_one_s4(pdev);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1426 Invalid PCI device group: 0x%x\n",
@@ -4283,6 +7764,9 @@
 	case LPFC_PCI_DEV_LP:
 		rc = lpfc_io_error_detected_s3(pdev, state);
 		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_error_detected_s4(pdev, state);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1427 Invalid PCI device group: 0x%x\n",
@@ -4317,6 +7801,9 @@
 	case LPFC_PCI_DEV_LP:
 		rc = lpfc_io_slot_reset_s3(pdev);
 		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_slot_reset_s4(pdev);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1428 Invalid PCI device group: 0x%x\n",
@@ -4346,6 +7833,9 @@
 	case LPFC_PCI_DEV_LP:
 		lpfc_io_resume_s3(pdev);
 		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_io_resume_s4(pdev);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1429 Invalid PCI device group: 0x%x\n",
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7f..7f5899b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a9767..516f480 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
  * @phba: HBA to allocate pools for
  *
  * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool.  Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool.  Creates and allocates kmalloc-backed mempools
  * for LPFC_MBOXQ_t and lpfc_nodelist.  Also allocates the VPI bitmask.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.  If any
@@ -56,19 +58,30 @@
  *   -ENOMEM on failure (if any memory allocations fail)
  **/
 int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
 {
 	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 	int longs;
 	int i;
 
-	phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
-				phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev,
+				phba->cfg_sg_dma_buf_size,
+				phba->cfg_sg_dma_buf_size,
+				0);
+	else
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev, phba->cfg_sg_dma_buf_size,
+				align, 0);
 	if (!phba->lpfc_scsi_dma_buf_pool)
 		goto fail;
 
 	phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
-							LPFC_BPL_SIZE, 8,0);
+							LPFC_BPL_SIZE,
+							align, 0);
 	if (!phba->lpfc_mbuf_pool)
 		goto fail_free_dma_buf_pool;
 
@@ -97,23 +110,31 @@
 						sizeof(struct lpfc_nodelist));
 	if (!phba->nlp_mem_pool)
 		goto fail_free_mbox_pool;
-
-	phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
-					      LPFC_BPL_SIZE, 8, 0);
-	if (!phba->lpfc_hbq_pool)
+	phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+					      phba->pcidev,
+					      LPFC_HDR_BUF_SIZE, align, 0);
+	if (!phba->lpfc_hrb_pool)
 		goto fail_free_nlp_mem_pool;
+	phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+					      phba->pcidev,
+					      LPFC_DATA_BUF_SIZE, align, 0);
+	if (!phba->lpfc_drb_pool)
+		goto fail_free_hbq_pool;
 
 	/* vpi zero is reserved for the physical port so add 1 to max */
 	longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
 	phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
 	if (!phba->vpi_bmask)
-		goto fail_free_hbq_pool;
+		goto fail_free_dbq_pool;
 
 	return 0;
 
+ fail_free_dbq_pool:
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
  fail_free_hbq_pool:
-	lpfc_sli_hbqbuf_free_all(phba);
-	pci_pool_destroy(phba->lpfc_hbq_pool);
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
  fail_free_nlp_mem_pool:
 	mempool_destroy(phba->nlp_mem_pool);
 	phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@
 }
 
 /**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
  * @phba: HBA to free memory for
  *
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool.  Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist.  Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
  *
  * Returns: None
  **/
 void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
+{
+	int i;
+	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
+
+	/* Free VPI bitmask memory */
+	kfree(phba->vpi_bmask);
+
+	/* Free HBQ pools */
+	lpfc_sli_hbqbuf_free_all(phba);
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
+
+	/* Free NLP memory pool */
+	mempool_destroy(phba->nlp_mem_pool);
+	phba->nlp_mem_pool = NULL;
+
+	/* Free mbox memory pool */
+	mempool_destroy(phba->mbox_mem_pool);
+	phba->mbox_mem_pool = NULL;
+
+	/* Free MBUF memory pool */
+	for (i = 0; i < pool->current_count; i++)
+		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+			      pool->elements[i].phys);
+	kfree(pool->elements);
+
+	pci_pool_destroy(phba->lpfc_mbuf_pool);
+	phba->lpfc_mbuf_pool = NULL;
+
+	/* Free DMA buffer memory pool */
+	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+	phba->lpfc_scsi_dma_buf_pool = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 	LPFC_MBOXQ_t *mbox, *next_mbox;
 	struct lpfc_dmabuf   *mp;
-	int i;
 
-	kfree(phba->vpi_bmask);
-	lpfc_sli_hbqbuf_free_all(phba);
-
+	/* Free memory used in mailbox queue back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -166,6 +233,7 @@
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
+	/* Free memory used in mailbox cmpl list back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -175,8 +243,10 @@
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
-
+	/* Free the active mailbox command back to the mailbox memory pool */
+	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 	if (psli->mbox_active) {
 		mbox = psli->mbox_active;
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@
 		psli->mbox_active = NULL;
 	}
 
-	for (i = 0; i < pool->current_count; i++)
-		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
-						 pool->elements[i].phys);
-	kfree(pool->elements);
-
-	pci_pool_destroy(phba->lpfc_hbq_pool);
-	mempool_destroy(phba->nlp_mem_pool);
-	mempool_destroy(phba->mbox_mem_pool);
-
-	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
-	pci_pool_destroy(phba->lpfc_mbuf_pool);
-
-	phba->lpfc_hbq_pool = NULL;
-	phba->nlp_mem_pool = NULL;
-	phba->mbox_mem_pool = NULL;
-	phba->lpfc_scsi_dma_buf_pool = NULL;
-	phba->lpfc_mbuf_pool = NULL;
+	/* Free and destroy all the allocated memory pools */
+	lpfc_mem_free(phba);
 
 	/* Free the iocb lookup array */
 	kfree(psli->iocbq_lookup);
 	psli->iocbq_lookup = NULL;
+
+	return;
 }
 
 /**
@@ -305,7 +362,7 @@
  * lpfc_els_hbq_alloc - Allocate an HBQ buffer
  * @phba: HBA to allocate HBQ buffer for
  *
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
  * pool along a non-DMA-mapped container for it.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.
@@ -323,7 +380,7 @@
 	if (!hbqbp)
 		return NULL;
 
-	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
 					  &hbqbp->dbuf.phys);
 	if (!hbqbp->dbuf.virt) {
 		kfree(hbqbp);
@@ -334,7 +391,7 @@
 }
 
 /**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
  * @phba: HBA buffer was allocated for
  * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
  *
@@ -348,12 +405,73 @@
 void
 lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
 {
-	pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+	pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
 	kfree(hbqbp);
 	return;
 }
 
 /**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe.  Must be called with no locks held.
+ *
+ * Returns:
+ *   pointer to HBQ on success
+ *   NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+	struct hbq_dmabuf *dma_buf;
+
+	dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+	if (!dma_buf)
+		return NULL;
+
+	dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+					    &dma_buf->hbuf.phys);
+	if (!dma_buf->hbuf.virt) {
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+					    &dma_buf->dbuf.phys);
+	if (!dma_buf->dbuf.virt) {
+		pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+			      dma_buf->hbuf.phys);
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->size = LPFC_BPL_SIZE;
+	return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+	pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+	pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+	kfree(dmab);
+	return;
+}
+
+/**
  * lpfc_in_buf_free - Free a DMA buffer
  * @phba: HBA buffer is associated with
  * @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77..6ba5a72 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a226c05..9af2db3 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -31,8 +31,10 @@
 #include <scsi/scsi_transport_fc.h>
 
 #include "lpfc_version.h"
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -57,6 +59,8 @@
 	"SCSI_PROT_READ_CONVERT",
 	"SCSI_PROT_WRITE_CONVERT"
 };
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
 
 static void
 lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -565,6 +569,8 @@
 		}
 		iocb->ulpClass = CLASS3;
 		psb->status = IOSTAT_SUCCESS;
+		/* Put it back into the SCSI buffer list */
+		lpfc_release_scsi_buf_s4(phba, psb);
 
 	}
 
@@ -572,6 +578,271 @@
 }
 
 /**
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_scsi_buf *psb, *next_psb;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+	list_for_each_entry_safe(psb, next_psb,
+		&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+		if (psb->cur_iocbq.sli4_xritag == xri) {
+			list_del(&psb->list);
+			psb->status = IOSTAT_SUCCESS;
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+			lpfc_release_scsi_buf_s4(phba, psb);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb;
+	int index, status, bcnt = 0, rcnt = 0, rc = 0;
+	LIST_HEAD(sblist);
+
+	for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+		psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+		if (psb) {
+			/* Remove from SCSI buffer list */
+			list_del(&psb->list);
+			/* Add it to a local SCSI buffer list */
+			list_add_tail(&psb->list, &sblist);
+			if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				bcnt = rcnt;
+				rcnt = 0;
+			}
+		} else
+			/* A hole present in the XRI array, need to skip */
+			bcnt = rcnt;
+
+		if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+			/* End of XRI array for SCSI buffer, complete */
+			bcnt = rcnt;
+
+		/* Continue until collect up to a nembed page worth of sgls */
+		if (bcnt == 0)
+			continue;
+		/* Now, post the SCSI buffer list sgls as a block */
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		bcnt = 0;
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+					 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
+	}
+	return rc;
+}
+
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_scsi_buf *psb;
+	struct sli4_sge *sgl;
+	IOCB_t *iocb;
+	dma_addr_t pdma_phys_fcp_cmd;
+	dma_addr_t pdma_phys_fcp_rsp;
+	dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+	uint16_t iotag, last_xritag = NO_XRI;
+	int status = 0, index;
+	int bcnt;
+	int non_sequential_xri = 0;
+	int rc = 0;
+	LIST_HEAD(sblist);
+
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
+
+		/*
+		 * Get memory from the pci pool to map the virt space to pci bus
+		 * space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+						GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
+
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			kfree(psb);
+			break;
+		}
+
+		psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+			      psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		if (last_xritag != NO_XRI
+			&& psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+			non_sequential_xri = 1;
+		} else
+			list_add_tail(&psb->list, &sblist);
+		last_xritag = psb->cur_iocbq.sli4_xritag;
+
+		index = phba->sli4_hba.scsi_xri_cnt++;
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+		psb->fcp_bpl = psb->data;
+		psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+			- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+					sizeof(struct fcp_cmnd));
+
+		/* Initialize local short-hand pointers. */
+		sgl = (struct sli4_sge *)psb->fcp_bpl;
+		pdma_phys_bpl = psb->dma_handle;
+		pdma_phys_fcp_cmd =
+			(psb->dma_handle + phba->cfg_sg_dma_buf_size)
+			 - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+		sgl++;
+
+		/* Setup the physical region for the FCP RSP */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+		/* setting the BLP size to 2 * sizeof BDE may not be correct.
+		 * We are setting the bpl to point to out sgl. An sgl's
+		 * entries are 16 bytes, a bpl entries are 12 bytes.
+		 */
+		iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
+		iocb->ulpBdeCount = 1;
+		iocb->ulpLe = 1;
+		iocb->ulpClass = CLASS3;
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		psb->dma_phys_bpl = pdma_phys_bpl;
+		phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+		if (non_sequential_xri) {
+			status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+						pdma_phys_bpl1,
+						psb->cur_iocbq.sli4_xritag);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+			break;
+		}
+	}
+	if (bcnt) {
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+				 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
+	}
+
+	return bcnt + non_sequential_xri - rc;
+}
+
+/**
  * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
  * @vport: The virtual port for which this call being executed.
  * @num_to_allocate: The requested number of buffers to allocate.
@@ -638,6 +909,39 @@
 }
 
 /**
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	unsigned long iflag = 0;
+
+	if (psb->status == IOSTAT_LOCAL_REJECT
+		&& psb->result == IOERR_ABORT_REQUESTED) {
+		spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list,
+			&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+	} else {
+
+		spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	}
+}
+
+/**
  * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is being released.
@@ -1455,6 +1759,115 @@
 }
 
 /**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+	struct scatterlist *sgel = NULL;
+	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+	dma_addr_t physaddr;
+	uint32_t num_bde = 0;
+	uint32_t dma_len;
+	uint32_t dma_offset = 0;
+	int nseg;
+
+	/*
+	 * There are three possibilities here - use scatter-gather segment, use
+	 * the single mapping, or neither.  Start the lpfc command prep by
+	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+	 * data bde entry.
+	 */
+	if (scsi_sg_count(scsi_cmnd)) {
+		/*
+		 * The driver stores the segment count returned from pci_map_sg
+		 * because this a count of dma-mappings used to map the use_sg
+		 * pages.  They are not guaranteed to be the same for those
+		 * architectures that implement an IOMMU.
+		 */
+
+		nseg = scsi_dma_map(scsi_cmnd);
+		if (unlikely(!nseg))
+			return 1;
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl += 1;
+
+		lpfc_cmd->seg_cnt = nseg;
+		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+			printk(KERN_ERR "%s: Too many sg segments from "
+			       "dma_map_sg.  Config %d, seg_cnt %d\n",
+			       __func__, phba->cfg_sg_seg_cnt,
+			       lpfc_cmd->seg_cnt);
+			scsi_dma_unmap(scsi_cmnd);
+			return 1;
+		}
+
+		/*
+		 * The driver established a maximum scatter-gather segment count
+		 * during probe that limits the number of sg elements in any
+		 * single scsi command.  Just run through the seg_cnt and format
+		 * the sge's.
+		 * When using SLI-3 the driver will try to fit all the BDEs into
+		 * the IOCB. If it can't then the BDEs get added to a BPL as it
+		 * does for SLI-2 mode.
+		 */
+		scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+			physaddr = sg_dma_address(sgel);
+			dma_len = sg_dma_len(sgel);
+			bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+			if ((num_bde + 1) == nseg)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			dma_offset += dma_len;
+			sgl++;
+		}
+	} else {
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+	}
+
+	/*
+	 * Finish initializing those IOCB fields that are dependent on the
+	 * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
+	 * explicitly reinitialized.
+	 * all iocb memory resources are reused.
+	 */
+	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+	/*
+	 * Due to difference in data length between DIF/non-DIF paths,
+	 * we need to set word 4 of IOCB here
+	 */
+	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+	return 0;
+}
+
+/**
  * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -1590,6 +2003,22 @@
 }
 
 /**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
  * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
@@ -2129,6 +2558,29 @@
 }
 
 /**
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		       struct lpfc_nodelist *pnode)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
  * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
@@ -2209,6 +2661,37 @@
 }
 
 /**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+				struct lpfc_scsi_buf *lpfc_cmd,
+				unsigned int lun,
+				uint8_t task_mgmt_cmd)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+						task_mgmt_cmd);
+}
+
+/**
  * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -2257,6 +2740,15 @@
 					lpfc_scsi_prep_task_mgmt_cmd_s3;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
 		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s4;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1418 Invalid HBA PCI-device group: 0x%x\n",
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d..65dfc8b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@
 	struct fcp_rsp *fcp_rsp;
 	struct ulp_bde64 *fcp_bpl;
 
+	dma_addr_t dma_phys_bpl;
+
 	/* cur_iocbq has phys of the dma-able buffer.
 	 * Iotag is in here
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e2d07d9..706bb22 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -29,9 +29,12 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -121,6 +124,76 @@
 }
 
 /**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+	return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq =  phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+	struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+	struct lpfc_sglq *sglq = NULL;
+	uint16_t adj_xri;
+	list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+	return sglq;
+}
+
+/**
  * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
  * @phba: Pointer to HBA context object.
  *
@@ -298,6 +371,14 @@
 	case CMD_GEN_REQUEST64_CR:
 	case CMD_GEN_REQUEST64_CX:
 	case CMD_XMIT_ELS_RSP64_CX:
+	case DSSCMD_IWRITE64_CR:
+	case DSSCMD_IWRITE64_CX:
+	case DSSCMD_IREAD64_CR:
+	case DSSCMD_IREAD64_CX:
+	case DSSCMD_INVALIDATE_DEK:
+	case DSSCMD_SET_KEK:
+	case DSSCMD_GET_KEK_ID:
+	case DSSCMD_GEN_XFER:
 		type = LPFC_SOL_IOCB;
 		break;
 	case CMD_ABORT_XRI_CN:
@@ -2629,6 +2710,56 @@
 	return retval;
 }
 
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+	uint32_t status;
+	int retval = 0;
+
+	/* Read the HBA Host Status Register */
+	status = lpfc_sli4_post_status_check(phba);
+
+	if (status) {
+		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+		lpfc_sli_brdrestart(phba);
+		status = lpfc_sli4_post_status_check(phba);
+	}
+
+	/* Check to see if any errors occurred during init */
+	if (status) {
+		phba->link_state = LPFC_HBA_ERROR;
+		retval = 1;
+	} else
+		phba->sli4_hba.intr_enable = 0;
+
+	return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+	return phba->lpfc_sli_brdready(phba, mask);
+}
+
 #define BARRIER_TEST_PATTERN (0xdeadbeef)
 
 /**
@@ -2863,7 +2994,66 @@
 }
 
 /**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint16_t cfg_value;
+	uint8_t qindx;
+
+	/* Reset HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0295 Reset HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	/* perform board reset */
+	phba->fc_eventTag = 0;
+	phba->pport->fc_myDID = 0;
+	phba->pport->fc_prevDID = 0;
+
+	/* Turn off parity checking and serr during the physical reset */
+	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	pci_write_config_word(phba->pcidev, PCI_COMMAND,
+			      (cfg_value &
+			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~(LPFC_PROCESS_LA);
+	phba->fcf.fcf_flag = 0;
+	/* Clean up the child queue list for the CQs */
+	list_del_init(&phba->sli4_hba.mbx_wq->list);
+	list_del_init(&phba->sli4_hba.els_wq->list);
+	list_del_init(&phba->sli4_hba.hdr_rq->list);
+	list_del_init(&phba->sli4_hba.dat_rq->list);
+	list_del_init(&phba->sli4_hba.mbx_cq->list);
+	list_del_init(&phba->sli4_hba.els_cq->list);
+	list_del_init(&phba->sli4_hba.rxq_cq->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Now physically reset the device */
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0389 Performing PCI function reset!\n");
+	/* Perform FCoE PCI function reset */
+	lpfc_pci_function_reset(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
  * @phba: Pointer to HBA context object.
  *
  * This function is called in the SLI initialization code path to
@@ -2875,8 +3065,8 @@
  * The function does not guarantee completion of MBX_RESTART mailbox
  * command before the return of this function.
  **/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli;
@@ -2915,7 +3105,7 @@
 	lpfc_sli_brdreset(phba);
 	phba->pport->stopped = 0;
 	phba->link_state = LPFC_INIT_START;
-
+	phba->hba_flag = 0;
 	spin_unlock_irq(&phba->hbalock);
 
 	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2930,6 +3120,55 @@
 }
 
 /**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+
+
+	/* Restart HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0296 Restart HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	lpfc_sli4_brdreset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	phba->pport->stopped = 0;
+	phba->link_state = LPFC_INIT_START;
+	phba->hba_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
+
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = get_seconds();
+
+	lpfc_hba_down_post(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+	return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
  * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
  * @phba: Pointer to HBA context object.
  *
@@ -3353,6 +3592,488 @@
 	return rc;
 }
 
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+		LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *mp;
+	struct lpfc_mqe *mqe;
+	uint32_t data_length;
+	int rc;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	mqe = &mboxq->u.mqe;
+	if (lpfc_dump_fcoe_param(phba, mboxq))
+		return -ENOMEM;
+
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):2571 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	if (rc) {
+		lpfc_mbuf_free(phba, mp->virt, mp->phys);
+		kfree(mp);
+		return -EIO;
+	}
+	data_length = mqe->un.mb_words[5];
+	if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+		return -EIO;
+
+	lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ *	      On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command.  In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		    uint8_t *vpd, uint32_t *vpd_size)
+{
+	int rc = 0;
+	uint32_t dma_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_mqe *mqe;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * Get a DMA buffer for the vpd data resulting from the READ_REV
+	 * mailbox command.
+	 */
+	dma_size = *vpd_size;
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  dma_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, dma_size);
+
+	/*
+	 * The SLI4 implementation of READ_REV conflicts at word1,
+	 * bits 31:16 and SLI4 adds vpd functionality not present
+	 * in SLI3.  This code corrects the conflicts.
+	 */
+	lpfc_read_rev(phba, mboxq);
+	mqe = &mboxq->u.mqe;
+	mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+	mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+	mqe->un.read_rev.word1 &= 0x0000FFFF;
+	bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+	bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc) {
+		dma_free_coherent(&phba->pcidev->dev, dma_size,
+				  dmabuf->virt, dmabuf->phys);
+		return -EIO;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0380 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	/*
+	 * The available vpd length cannot be bigger than the
+	 * DMA buffer passed to the port.  Catch the less than
+	 * case and update the caller's size.
+	 */
+	if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+		*vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+	lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+	dma_free_coherent(&phba->pcidev->dev, dma_size,
+			  dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+	uint8_t fcp_eqidx;
+
+	lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+	lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+	int rc;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mqe *mqe;
+	uint8_t *vpd;
+	uint32_t vpd_size;
+	uint32_t ftr_rsp = 0;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+	struct lpfc_vport *vport = phba->pport;
+	struct lpfc_dmabuf *mp;
+
+	/* Perform a PCI function reset to start from clean */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+
+	/* Check the HBA Host Status Register for readyness */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+	else {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	/*
+	 * Allocate a single mailbox container for initializing the
+	 * port.
+	 */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/*
+	 * Continue initialization with default values even if driver failed
+	 * to read FCoE param config regions
+	 */
+	if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+			"2570 Failed to read FCoE parameters \n");
+
+	/* Issue READ_REV to collect vpd and FW information. */
+	vpd_size = PAGE_SIZE;
+	vpd = kzalloc(vpd_size, GFP_KERNEL);
+	if (!vpd) {
+		rc = -ENOMEM;
+		goto out_free_mbox;
+	}
+
+	rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+	if (unlikely(rc))
+		goto out_free_vpd;
+
+	mqe = &mboxq->u.mqe;
+	if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+		    &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+	    (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+			"0376 READ_REV Error. SLI Level %d "
+			"FCoE enabled %d\n",
+			bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+			bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+	/* Single threaded at this point, no need for lock */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag |= HBA_FCOE_SUPPORT;
+	spin_unlock_irq(&phba->hbalock);
+	/*
+	 * Evaluate the read rev and vpd data. Populate the driver
+	 * state with the results. If this routine fails, the failure
+	 * is not fatal as the driver will use generic values.
+	 */
+	rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+	if (unlikely(!rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0377 Error %d parsing vpd. "
+				"Using defaults.\n", rc);
+		rc = 0;
+	}
+
+	/* By now, we should determine the SLI revision, hard code for now */
+	phba->sli_rev = LPFC_SLI_REV4;
+
+	/*
+	 * Discover the port's supported feature set and match it against the
+	 * hosts requests.
+	 */
+	lpfc_request_features(phba, mboxq);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	/*
+	 * The port must support FCP initiator mode as this is the
+	 * only mode running in the host.
+	 */
+	if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0378 No support for fcpi mode.\n");
+		ftr_rsp++;
+	}
+
+	/*
+	 * If the port cannot support the host's requested features
+	 * then turn off the global config parameters to disable the
+	 * feature in the driver.  This is not a fatal error.
+	 */
+	if ((phba->cfg_enable_bg) &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (phba->max_vpi && phba->cfg_enable_npiv &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (ftr_rsp) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0379 Feature Mismatch Data: x%08x %08x "
+				"x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+				mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+				phba->cfg_enable_npiv, phba->max_vpi);
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+			phba->cfg_enable_bg = 0;
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+			phba->cfg_enable_npiv = 0;
+	}
+
+	/* These SLI3 features are assumed in SLI4 */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Read the port's service parameters. */
+	lpfc_read_sparam(phba, mboxq, vport->vpi);
+	mboxq->vport = vport;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	if (rc == MBX_SUCCESS) {
+		memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+		rc = 0;
+	}
+
+	/*
+	 * This memory was allocated by the lpfc_read_sparam routine. Release
+	 * it to the mbuf pool.
+	 */
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	mboxq->context1 = NULL;
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0382 READ_SPARAM command failed "
+				"status %d, mbxStatus x%x\n",
+				rc, bf_get(lpfc_mqe_status, mqe));
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	if (phba->cfg_soft_wwnn)
+		u64_to_wwn(phba->cfg_soft_wwnn,
+			   vport->fc_sparam.nodeName.u.wwn);
+	if (phba->cfg_soft_wwpn)
+		u64_to_wwn(phba->cfg_soft_wwpn,
+			   vport->fc_sparam.portName.u.wwn);
+	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+	       sizeof(struct lpfc_name));
+	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+	       sizeof(struct lpfc_name));
+
+	/* Update the fc_host data structures with new wwn. */
+	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+	/* Register SGL pool to the device using non-embedded mailbox command */
+	rc = lpfc_sli4_post_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0582 Error %d during sgl post operation", rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Register SCSI SGL pool to the device */
+	rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0383 Error %d during scsi sgl post opeation",
+				rc);
+		/* Some Scsi buffers were moved to the abort scsi list */
+		/* A pci function reset will repost them */
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Post the rpi header region to the device. */
+	rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0393 Error %d during rpi post operation\n",
+				rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+	/* Temporary initialization of lpfc_fip_flag to non-fip */
+	bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+	/* Set up all the queues to the device */
+	rc = lpfc_sli4_queue_setup(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0381 Error %d during queue setup.\n ", rc);
+		goto out_stop_timers;
+	}
+
+	/* Arm the CQs and then EQs on device */
+	lpfc_sli4_arm_cqeq_intr(phba);
+
+	/* Indicate device interrupt mode */
+	phba->sli4_hba.intr_enable = 1;
+
+	/* Allow asynchronous mailbox command to go through */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Post receive buffers to the device */
+	lpfc_sli4_rb_setup(phba);
+
+	/* Start the ELS watchdog timer */
+	/*
+	 * The driver for SLI4 is not yet ready to process timeouts
+	 * or interrupts.  Once it is, the comment bars can be removed.
+	 */
+	/* mod_timer(&vport->els_tmofunc,
+	 *           jiffies + HZ * (phba->fc_ratov*2)); */
+
+	/* Start heart beat timer */
+	mod_timer(&phba->hb_tmofunc,
+		  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+	phba->hb_outstanding = 0;
+	phba->last_completion_time = jiffies;
+
+	/* Start error attention (ERATT) polling timer */
+	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+	/*
+	 * The port is ready, set the host's link state to LINK_DOWN
+	 * in preparation for link interrupts.
+	 */
+	lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+	mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	lpfc_set_loopback_flag(phba);
+	/* Change driver state to LPFC_LINK_DOWN right before init link */
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_LINK_DOWN;
+	spin_unlock_irq(&phba->hbalock);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (unlikely(rc != MBX_NOT_FINISHED)) {
+		kfree(vpd);
+		return 0;
+	} else
+		rc = -EIO;
+
+	/* Unset all the queues set up in this routine when error out */
+	if (rc)
+		lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+	if (rc)
+		lpfc_stop_hba_timers(phba);
+out_free_vpd:
+	kfree(vpd);
+out_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
 
 /**
  * lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3812,13 +4533,420 @@
 
 out_not_finished:
 	if (processing_queue) {
-		pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+		pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
 		lpfc_mbox_cmpl_put(phba, pmbox);
 	}
 	return MBX_NOT_FINISHED;
 }
 
 /**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port.  The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ *	MBX_SUCCESS - mailbox posted successfully
+ *	Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	int rc = MBX_SUCCESS;
+	unsigned long iflag;
+	uint32_t db_ready;
+	uint32_t mcqe_status;
+	uint32_t mbx_cmnd;
+	unsigned long timeout;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mqe *mb = &mboxq->u.mqe;
+	struct lpfc_bmbx_create *mbox_rgn;
+	struct dma_address *dma_address;
+	struct lpfc_register bmbx_reg;
+
+	/*
+	 * Only one mailbox can be active to the bootstrap mailbox region
+	 * at a time and there is no queueing provided.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2532 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_POLL);
+		return MBXERR_ERROR;
+	}
+	/* The server grabs the token and owns it until release */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/*
+	 * Initialize the bootstrap memory region to avoid stale data areas
+	 * in the mailbox post.  Then copy the caller's mailbox contents to
+	 * the bmbx mailbox region.
+	 */
+	mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+	memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+	lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+			      sizeof(struct lpfc_mqe));
+
+	/* Post the high mailbox dma address to the port and wait for ready. */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/* Post the low mailbox dma address to the port. */
+	writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/*
+	 * Read the CQ to ensure the mailbox has completed.
+	 * If so, update the mailbox status so that the upper layers
+	 * can complete the request normally.
+	 */
+	lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+			      sizeof(struct lpfc_mqe));
+	mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+	lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+			      sizeof(struct lpfc_mcqe));
+	mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+	/* Prefix the mailbox status with range x4000 to note SLI4 status. */
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+		bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+		rc = MBXERR_ERROR;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+			" x%x x%x CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			bf_get(lpfc_mqe_status, mb),
+			mb->un.mb_words[0], mb->un.mb_words[1],
+			mb->un.mb_words[2], mb->un.mb_words[3],
+			mb->un.mb_words[4], mb->un.mb_words[5],
+			mb->un.mb_words[6], mb->un.mb_words[7],
+			mb->un.mb_words[8], mb->un.mb_words[9],
+			mb->un.mb_words[10], mb->un.mb_words[11],
+			mb->un.mb_words[12], mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+exit:
+	/* We are holding the token, no needed for lock when release */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		       uint32_t flag)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	unsigned long iflags;
+	int rc;
+
+	/* Detect polling mode and jump to a handler */
+	if (!phba->sli4_hba.intr_enable) {
+		if (flag == MBX_POLL)
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+		else
+			rc = -EIO;
+		if (rc != MBX_SUCCESS)
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2541 Mailbox command x%x "
+					"(x%x) cannot issue Data: x%x x%x\n",
+					mboxq->vport ? mboxq->vport->vpi : 0,
+					mboxq->u.mb.mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, mboxq),
+					psli->sli_flag, flag);
+		return rc;
+	} else if (flag == MBX_POLL) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2542 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		return -EIO;
+	}
+
+	/* Now, interrupt mode asynchrous mailbox command */
+	rc = lpfc_mbox_cmd_check(phba, mboxq);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2543 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2544 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	/* Put the mailbox command to the driver internal FIFO */
+	psli->slistat.mbox_busy++;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	lpfc_mbox_put(phba, mboxq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0354 Mbox cmd issue - Enqueue Data: "
+			"x%x (x%x) x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+			bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state,
+			psli->sli_flag, MBX_NOWAIT);
+	/* Wake up worker thread to transport mailbox command from head */
+	lpfc_worker_wake_up(phba);
+
+	return MBX_BUSY;
+
+out_not_finished:
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mboxq;
+	int rc = MBX_SUCCESS;
+	unsigned long iflags;
+	struct lpfc_mqe *mqe;
+	uint32_t mbx_cmnd;
+
+	/* Check interrupt mode before post async mailbox command */
+	if (unlikely(!phba->sli4_hba.intr_enable))
+		return MBX_NOT_FINISHED;
+
+	/* Check for mailbox command service token */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (unlikely(phba->sli.mbox_active)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0384 There is pending active mailbox cmd\n");
+		return MBX_NOT_FINISHED;
+	}
+	/* Take the mailbox command service token */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+	/* Get the next mailbox command from head of queue */
+	mboxq = lpfc_mbox_get(phba);
+
+	/* If no more mailbox command waiting for post, we're done */
+	if (!mboxq) {
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_SUCCESS;
+	}
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check device readiness for posting mailbox command */
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc))
+		/* Driver clean routine will clean up pending mailbox */
+		goto out_not_finished;
+
+	/* Prepare the mbox command to be posted */
+	mqe = &mboxq->u.mqe;
+	mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+	/* Start timer for the mbox_tmo and log some mailbox post messages */
+	mod_timer(&psli->mbox_tmo, (jiffies +
+		  (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+			"x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state, psli->sli_flag);
+
+	if (mbx_cmnd != MBX_HEARTBEAT) {
+		if (mboxq->vport) {
+			lpfc_debugfs_disc_trc(mboxq->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Send vport: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		} else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Send: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		}
+	}
+	psli->slistat.mbox_cmd++;
+
+	/* Post the mailbox command to the port */
+	rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2533 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_NOWAIT);
+		goto out_not_finished;
+	}
+
+	return rc;
+
+out_not_finished:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+	__lpfc_mbox_cmpl_put(phba, mboxq);
+	/* Release the token */
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+	return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s3;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s4;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1420 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
  * __lpfc_sli_ringtx_put - Add an iocb to the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -4501,28 +5629,42 @@
 
 	/* Return any active mbox cmds */
 	del_timer_sync(&psli->mbox_tmo);
-	spin_lock_irqsave(&phba->hbalock, flags);
 
-	spin_lock(&phba->pport->work_port_lock);
+	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
-	spin_unlock(&phba->pport->work_port_lock);
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
 
-	/* Return any pending or completed mbox cmds */
-	list_splice_init(&phba->sli.mboxq, &completions);
-	if (psli->mbox_active) {
-		list_add_tail(&psli->mbox_active->list, &completions);
-		psli->mbox_active = NULL;
-		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-	}
-	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
-	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return 1;
+}
 
-	while (!list_empty(&completions)) {
-		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
-		pmb->mb.mbxStatus = MBX_NOT_FINISHED;
-		if (pmb->mbox_cmpl)
-			pmb->mbox_cmpl(phba,pmb);
-	}
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+	/* Stop the SLI4 device port */
+	lpfc_stop_port(phba);
+
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
 	return 1;
 }
 
@@ -4853,7 +5995,10 @@
 	iabt = &abtsiocbp->iocb;
 	iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
 	iabt->un.acxri.abortContextTag = icmd->ulpContext;
-	iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+	else
+		iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
 	iabt->ulpLe = 1;
 	iabt->ulpClass = icmd->ulpClass;
 
@@ -4869,7 +6014,7 @@
 			 "abort cmd iotag x%x\n",
 			 iabt->un.acxri.abortContextTag,
 			 iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
-	retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+	retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
 
 	if (retval)
 		__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -5052,7 +6197,10 @@
 		cmd = &iocbq->iocb;
 		abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
 		abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
-		abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+		else
+			abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
 		abtsiocb->iocb.ulpLe = 1;
 		abtsiocb->iocb.ulpClass = cmd->ulpClass;
 		abtsiocb->vport = phba->pport;
@@ -5064,7 +6212,8 @@
 
 		/* Setup callback routine and issue the command. */
 		abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
-		ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+		ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+					      abtsiocb, 0);
 		if (ret_val == IOCB_ERROR) {
 			lpfc_sli_release_iocbq(phba, abtsiocb);
 			errcnt++;
@@ -5145,7 +6294,7 @@
  **/
 int
 lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
-			 struct lpfc_sli_ring *pring,
+			 uint32_t ring_number,
 			 struct lpfc_iocbq *piocb,
 			 struct lpfc_iocbq *prspiocbq,
 			 uint32_t timeout)
@@ -5176,7 +6325,7 @@
 		readl(phba->HCregaddr); /* flush */
 	}
 
-	retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+	retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
 	if (retval == IOCB_SUCCESS) {
 		timeout_req = timeout * HZ;
 		timeleft = wait_event_timeout(done_q,
@@ -5385,6 +6534,58 @@
 }
 
 /**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t uerr_sta_hi, uerr_sta_lo;
+	uint32_t onlnreg0, onlnreg1;
+
+	/* For now, use the SLI4 device internal unrecoverable error
+	 * registers for error attention. This can be changed later.
+	 */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+		uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerr_sta_lo || uerr_sta_hi) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1423 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerr_sta_lo, uerr_sta_hi,
+					onlnreg0, onlnreg1);
+			/* TEMP: as the driver error recover logic is not
+			 * fully developed, we just log the error message
+			 * and the device error attention action is now
+			 * temporarily disabled.
+			 */
+			return 0;
+			phba->work_status[0] = uerr_sta_lo;
+			phba->work_status[1] = uerr_sta_hi;
+			spin_lock_irq(&phba->hbalock);
+			/* Set the driver HA work bitmap */
+			phba->work_ha |= HA_ERATT;
+			/* Indicate polling handles this ERATT */
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			spin_unlock_irq(&phba->hbalock);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/**
  * lpfc_sli_check_eratt - check error attention events
  * @phba: Pointer to HBA context.
  *
@@ -5434,6 +6635,10 @@
 		/* Read chip Host Attention (HA) register */
 		ha_copy = lpfc_sli_eratt_read(phba);
 		break;
+	case LPFC_SLI_REV4:
+		/* Read devcie Uncoverable Error (UERR) registers */
+		ha_copy = lpfc_sli4_eratt_read(phba);
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0299 Invalid SLI revision (%d)\n",
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 8839386..e6c88ee 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@
 	LPFC_CTX_HOST
 } lpfc_ctx_cmd;
 
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+	uint8_t hw_status;
+	uint8_t bfield;
+#define LPFC_XB	0x1
+#define LPFC_PV	0x2
+	uint8_t priority;
+	uint8_t reserved;
+};
+
 /* This structure is used to handle IOCB requests / responses */
 struct lpfc_iocbq {
 	/* lpfc_iocbqs are used in double linked lists */
 	struct list_head list;
 	struct list_head clist;
 	uint16_t iotag;         /* pre-assigned IO tag */
-	uint16_t rsvd1;
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 
 	IOCB_t iocb;		/* IOCB cmd */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@
 			   struct lpfc_iocbq *);
 	void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
 			   struct lpfc_iocbq *);
-
+	struct lpfc_sli4_rspiocb_info sli4_info;
 };
 
 #define SLI_IOCB_RET_IOCB      1	/* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@
 typedef struct lpfcMboxq {
 	/* MBOXQs are used in single linked lists */
 	struct list_head list;	/* ptr to next mailbox command */
-	MAILBOX_t mb;		/* Mailbox cmd */
-	struct lpfc_vport *vport;/* virutal port pointer */
+	union {
+		MAILBOX_t mb;		/* Mailbox cmd */
+		struct lpfc_mqe mqe;
+	} u;
+	struct lpfc_vport *vport;/* virtual port pointer */
 	void *context1;		/* caller context information */
 	void *context2;		/* caller context information */
 
 	void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
 	uint8_t mbox_flag;
-
+	struct lpfc_mcqe mcqe;
+	struct lpfc_mbx_nembed_sge_virt *sge_array;
 } LPFC_MBOXQ_t;
 
 #define MBX_POLL        1	/* poll mailbox till command done, then
@@ -234,6 +248,7 @@
 #define LPFC_PROCESS_LA           0x400	/* Able to process link attention */
 #define LPFC_BLOCK_MGMT_IO        0x800	/* Don't allow mgmt mbx or iocb cmds */
 #define LPFC_MENLO_MAINT          0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK    0x2000 /* Async mailbox is blocked */
 
 	struct lpfc_sli_ring ring[LPFC_MAX_RING];
 	int fcp_ring;		/* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60	/* Sec tmo for outstanding mbox
+					   command */
 #define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
 					 * or erase cmds. This is especially
 					 * long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 0000000..5196b466
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT               100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL	32
+#define LPFC_GET_QE_REL_INT			32
+#define LPFC_RPI_LOW_WATER_MARK			10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT		254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX       8
+#define LPFC_SP_EQN_DEF       1
+#define LPFC_FP_EQN_DEF       1
+#define LPFC_FP_EQN_MIN       1
+#define LPFC_FP_EQN_MAX       (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX       32
+#define LPFC_SP_WQN_DEF       1
+#define LPFC_FP_WQN_DEF       4
+#define LPFC_FP_WQN_MIN       1
+#define LPFC_FP_WQN_MAX       (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX	0
+#define LPFC_FCOE_FCF_GET_FIRST	0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE	0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3	0xFF
+#define LPFC_FCOE_FCF_MAC4	0xFF
+#define LPFC_FCOE_FCF_MAC5	0xFE
+#define LPFC_FCOE_FCF_MAP0	0x0E
+#define LPFC_FCOE_FCF_MAP1	0xFC
+#define LPFC_FCOE_FCF_MAP2	0x00
+#define LPFC_FCOE_MAX_RCV_SIZE	0x5AC
+#define LPFC_FCOE_FKA_ADV_PER	0
+#define LPFC_FCOE_FIP_PRIORITY	0x80
+
+enum lpfc_sli4_queue_type {
+	LPFC_EQ,
+	LPFC_GCQ,
+	LPFC_MCQ,
+	LPFC_WCQ,
+	LPFC_RCQ,
+	LPFC_MQ,
+	LPFC_WQ,
+	LPFC_HRQ,
+	LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+	LPFC_NONE,
+	LPFC_MBOX,
+	LPFC_FCP,
+	LPFC_ELS,
+	LPFC_USOL
+};
+
+union sli4_qe {
+	void *address;
+	struct lpfc_eqe *eqe;
+	struct lpfc_cqe *cqe;
+	struct lpfc_mcqe *mcqe;
+	struct lpfc_wcqe_complete *wcqe_complete;
+	struct lpfc_wcqe_release *wcqe_release;
+	struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+	struct lpfc_rcqe_complete *rcqe_complete;
+	struct lpfc_mqe *mqe;
+	union  lpfc_wqe *wqe;
+	struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+	struct list_head list;
+	enum lpfc_sli4_queue_type type;
+	enum lpfc_sli4_queue_subtype subtype;
+	struct lpfc_hba *phba;
+	struct list_head child_list;
+	uint32_t entry_count;	/* Number of entries to support on the queue */
+	uint32_t entry_size;	/* Size of each queue entry. */
+	uint32_t queue_id;	/* Queue ID assigned by the hardware */
+	struct list_head page_list;
+	uint32_t page_count;	/* Number of pages allocated for this queue */
+
+	uint32_t host_index;	/* The host's index for putting or getting */
+	uint32_t hba_index;	/* The last known hba index for get or put */
+	union sli4_qe qe[1];	/* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+	struct list_head list;
+	union {
+		struct lpfc_mcqe		mcqe_cmpl;
+		struct lpfc_acqe_link		acqe_link;
+		struct lpfc_acqe_fcoe		acqe_fcoe;
+		struct lpfc_acqe_dcbx		acqe_dcbx;
+		struct lpfc_rcqe		rcqe_cmpl;
+		struct sli4_wcqe_xri_aborted	wcqe_axri;
+	} cqe;
+};
+
+struct lpfc_sli4_link {
+	uint8_t speed;
+	uint8_t duplex;
+	uint8_t status;
+	uint8_t physical;
+	uint8_t fault;
+};
+
+struct lpfc_fcf {
+	uint8_t	 fabric_name[8];
+	uint8_t  mac_addr[6];
+	uint16_t fcf_indx;
+	uint16_t fcfi;
+	uint32_t fcf_flag;
+#define FCF_AVAILABLE	0x01 /* FCF available for discovery */
+#define FCF_REGISTERED	0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED	0x04 /* FCF discovery started  */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE	0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN	0x20 /* Use the vlan id specified */
+	uint32_t priority;
+	uint32_t addr_mode;
+	uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION	1
+#define LPFC_REGION23_LAST_REC  0xff
+struct lpfc_fip_param_hdr {
+	uint8_t type;
+#define FCOE_PARAM_TYPE		0xA0
+	uint8_t length;
+#define FCOE_PARAM_LENGTH	2
+	uint8_t parm_version;
+#define FIPP_VERSION		0x01
+	uint8_t parm_flags;
+#define	lpfc_fip_param_hdr_fipp_mode_SHIFT	6
+#define	lpfc_fip_param_hdr_fipp_mode_MASK	0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD	parm_flags
+#define	FIPP_MODE_ON				0x2
+#define	FIPP_MODE_OFF				0x0
+#define FIPP_VLAN_VALID				0x1
+};
+
+struct lpfc_fcoe_params {
+	uint8_t fc_map[3];
+	uint8_t reserved1;
+	uint16_t vlan_tag;
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+	uint8_t type;
+#define FCOE_CONN_TBL_TYPE		0xA1
+	uint8_t length;   /* words */
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+	uint16_t flags;
+#define	FCFCNCT_VALID		0x0001
+#define	FCFCNCT_BOOT		0x0002
+#define	FCFCNCT_PRIMARY		0x0004   /* if not set, Secondary */
+#define	FCFCNCT_FBNM_VALID	0x0008
+#define	FCFCNCT_SWNM_VALID	0x0010
+#define	FCFCNCT_VLAN_VALID	0x0020
+#define	FCFCNCT_AM_VALID	0x0040
+#define	FCFCNCT_AM_PREFERRED	0x0080   /* if not set, AM Required */
+#define	FCFCNCT_AM_SPMA		0x0100	 /* if not set, FPMA */
+
+	uint16_t vlan_tag;
+	uint8_t fabric_name[8];
+	uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+	struct list_head list;
+	struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox.  This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address dma_address;
+	void *avirt;
+	dma_addr_t aphys;
+	uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 	4
+#define LPFC_EQE_SIZE_16B	16
+#define LPFC_CQE_SIZE		16
+#define LPFC_WQE_SIZE		64
+#define LPFC_MQE_SIZE		256
+#define LPFC_RQE_SIZE		8
+
+#define LPFC_EQE_DEF_COUNT	1024
+#define LPFC_CQE_DEF_COUNT      256
+#define LPFC_WQE_DEF_COUNT      64
+#define LPFC_MQE_DEF_COUNT      16
+#define LPFC_RQE_DEF_COUNT	512
+
+#define LPFC_QUEUE_NOARM	false
+#define LPFC_QUEUE_REARM	true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+	uint16_t max_xri;
+	uint16_t xri_base;
+	uint16_t xri_used;
+	uint16_t max_rpi;
+	uint16_t rpi_base;
+	uint16_t rpi_used;
+	uint16_t max_vpi;
+	uint16_t vpi_base;
+	uint16_t vpi_used;
+	uint16_t max_vfi;
+	uint16_t vfi_base;
+	uint16_t vfi_used;
+	uint16_t max_fcfi;
+	uint16_t fcfi_base;
+	uint16_t fcfi_used;
+	uint16_t max_eq;
+	uint16_t max_rq;
+	uint16_t max_cq;
+	uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+	uint32_t idx;
+	struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+	void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR0, config space registers */
+	void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR1, control registers */
+	void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR2, doorbell registers */
+	/* BAR0 PCI config space register memory map */
+	void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+	void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+	void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+	void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR	0xFFFFFFFF
+	void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+	/* BAR1 FCoE function CSR register memory map */
+	void __iomem *STAregaddr;    /* Address to HST_STATE register */
+	void __iomem *ISRregaddr;    /* Address to HST_ISR register */
+	void __iomem *IMRregaddr;    /* Address to HST_IMR register */
+	void __iomem *ISCRregaddr;   /* Address to HST_ISCR register */
+	/* BAR2 VF-0 doorbell register memory map */
+	void __iomem *RQDBregaddr;   /* Address to RQ_DOORBELL register */
+	void __iomem *WQDBregaddr;   /* Address to WQ_DOORBELL register */
+	void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+	void __iomem *MQDBregaddr;   /* Address to MQ_DOORBELL register */
+	void __iomem *BMBXregaddr;   /* Address to BootStrap MBX register */
+
+	struct msix_entry *msix_entries;
+	uint32_t cfg_eqn;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+	/* Pointers to the constructed SLI4 queues */
+	struct lpfc_queue **fp_eq; /* Fast-path event queue */
+	struct lpfc_queue *sp_eq;  /* Slow-path event queue */
+	struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+	struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+	struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+	struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+	struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+	struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+	struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+	struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+	struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+	/* Setup information for various queue parameters */
+	int eq_esize;
+	int eq_ecount;
+	int cq_esize;
+	int cq_ecount;
+	int wq_esize;
+	int wq_ecount;
+	int mq_esize;
+	int mq_ecount;
+	int rq_esize;
+	int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC         10000
+#define LPFC_FP_EQ_MAX_INTR_SEC         10000
+
+	uint32_t intr_enable;
+	struct lpfc_bmbx bmbx;
+	struct lpfc_max_cfg_param max_cfg_param;
+	uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+	uint16_t next_rpi;
+	uint16_t scsi_xri_max;
+	uint16_t scsi_xri_cnt;
+	struct list_head lpfc_free_sgl_list;
+	struct list_head lpfc_sgl_list;
+	struct lpfc_sglq **lpfc_els_sgl_array;
+	struct list_head lpfc_abts_els_sgl_list;
+	struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+	struct list_head lpfc_abts_scsi_buf_list;
+	uint32_t total_sglq_bufs;
+	struct lpfc_sglq **lpfc_sglq_active_list;
+	struct list_head lpfc_rpi_hdr_list;
+	unsigned long *rpi_bmask;
+	uint16_t rpi_count;
+	struct lpfc_sli4_flags sli4_flags;
+	struct list_head sp_rspiocb_work_queue;
+	struct list_head sp_cqe_event_pool;
+	struct list_head sp_asynce_work_queue;
+	struct list_head sp_fcp_xri_aborted_work_queue;
+	struct list_head sp_els_xri_aborted_work_queue;
+	struct list_head sp_unsol_work_queue;
+	struct lpfc_sli4_link link_state;
+	spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+	spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+	GEN_BUFF_TYPE,
+	SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+	/* lpfc_sglqs are used in double linked lists */
+	struct list_head list;
+	struct list_head clist;
+	enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+	uint16_t iotag;         /* pre-assigned IO tag */
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
+	struct sli4_sge *sgl;	/* pre-assigned SGL */
+	void *virt;		/* virtual address. */
+	dma_addr_t phys;	/* physical address */
+};
+
+struct lpfc_rpi_hdr {
+	struct list_head list;
+	uint32_t len;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t page_count;
+	uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+		     uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+			   struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+			uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+			 struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56..59e67f7 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -89,6 +91,8 @@
 		vpi = 0;
 	else
 		set_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used++;
 	spin_unlock_irq(&phba->hbalock);
 	return vpi;
 }
@@ -96,8 +100,12 @@
 static void
 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
 {
+	if (vpi == 0)
+		return;
 	spin_lock_irq(&phba->hbalock);
 	clear_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used--;
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -308,6 +316,21 @@
 		goto error_out;
 	}
 
+	/*
+	 * In SLI4, the vpi must be activated before it can be used
+	 * by the port.
+	 */
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_init_vpi(phba, vpi);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+					"1838 Failed to INIT_VPI on vpi %d "
+					"status %d\n", vpi, rc);
+			rc = VPORT_NORESOURCES;
+			lpfc_free_vpi(phba, vpi);
+			goto error_out;
+		}
+	}
 
 	/* Assign an unused board number */
 	if ((instance = lpfc_get_instance()) < 0) {