sh: mach-sdk7786: Probe system FPGA area mapping.
This implements dynamic probing for the system FPGA. The system reset
controller contains a fixed magic read word in order to identify the
FPGA. This just utilizes a simple loop that scans across all of the fixed
physical areas (area 0 through area 6) to locate the FPGA.
The FPGA also contains register information detailing the area mappings
and chip select settings for all of the other blocks, so this needs to be
done before we can set up anything else.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
index 99f903c..3e4ec66 100644
--- a/arch/sh/boards/mach-sdk7786/fpga.c
+++ b/arch/sh/boards/mach-sdk7786/fpga.c
@@ -11,9 +11,44 @@
#include <linux/io.h>
#include <linux/bcd.h>
#include <mach/fpga.h>
+#include <asm/sizes.h>
-#define FPGA_REGS_BASE 0x07fff800
-#define FPGA_REGS_SIZE 0x490
+#define FPGA_REGS_OFFSET 0x03fff800
+#define FPGA_REGS_SIZE 0x490
+
+/*
+ * The FPGA can be mapped in any of the generally available areas,
+ * so we attempt to scan for it using the fixed SRSTR read magic.
+ *
+ * Once the FPGA is located, the rest of the mapping data for the other
+ * components can be determined dynamically from its section mapping
+ * registers.
+ */
+static void __iomem *sdk7786_fpga_probe(void)
+{
+ unsigned long area;
+ void __iomem *base;
+
+ /*
+ * Iterate over all of the areas where the FPGA could be mapped.
+ * The possible range is anywhere from area 0 through 6, area 7
+ * is reserved.
+ */
+ for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
+ base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
+ if (!base) {
+ /* Failed to remap this area, move along. */
+ continue;
+ }
+
+ if (ioread16(base + SRSTR) == SRSTR_MAGIC)
+ return base; /* Found it! */
+
+ iounmap(base);
+ }
+
+ return NULL;
+}
void __iomem *sdk7786_fpga_base;
@@ -21,9 +56,9 @@
{
u16 version, date;
- sdk7786_fpga_base = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE);
+ sdk7786_fpga_base = sdk7786_fpga_probe();
if (unlikely(!sdk7786_fpga_base)) {
- panic("FPGA remapping failed.\n");
+ panic("FPGA detection failed.\n");
return;
}
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733..d51da25 100644
--- a/arch/sh/include/cpu-sh4/cpu/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
@@ -28,6 +28,15 @@
#define P4SEG_TLB_DATA 0xf7000000
#define P4SEG_REG_BASE 0xff000000
+#define PA_AREA0 0x00000000
+#define PA_AREA1 0x04000000
+#define PA_AREA2 0x08000000
+#define PA_AREA3 0x0c000000
+#define PA_AREA4 0x10000000
+#define PA_AREA5 0x14000000
+#define PA_AREA6 0x18000000
+#define PA_AREA7 0x1c000000
+
#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
index a85d985..2120d67 100644
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ b/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -6,6 +6,8 @@
#include <linux/bitops.h>
#define SRSTR 0x000
+#define SRSTR_MAGIC 0x1971 /* Fixed magical read value */
+
#define INTASR 0x010
#define INTAMR 0x020
#define MODSWR 0x030
