[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig
The AT91 NAND driver needs just a few tiny modifications to work on
AVR32 as well. Rename it atmel_nand to reflect this.
Also move the ECC register definitions into drivers/mtd/nand since they
are only useful to the atmel_nand driver, and get rid of the useless
filename at the top of each file.
Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 0000000..170db86
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define AT91_ECC_CR 0x00 /* Control register */
+#define AT91_ECC_RST (1 << 0) /* Reset parity */
+
+#define AT91_ECC_MR 0x04 /* Mode register */
+#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define AT91_ECC_PAGESIZE_528 (0)
+#define AT91_ECC_PAGESIZE_1056 (1)
+#define AT91_ECC_PAGESIZE_2112 (2)
+#define AT91_ECC_PAGESIZE_4224 (3)
+
+#define AT91_ECC_SR 0x08 /* Status register */
+#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define AT91_ECC_PR 0x0c /* Parity register */
+#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define AT91_ECC_NPR 0x10 /* NParity register */
+#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
+
+#endif
