/*
	This is part of rtl8180 OpenSource driver.
	Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
	Released under the terms of GPL (General Public Licence)

	Parts of this driver are based on the GPL part of the
	official Realtek driver.
	Parts of this driver are based on the rtl8180 driver skeleton
	from Patric Schenke & Andres Salomon.
	Parts of this driver are based on the Intel Pro Wireless
	2100 GPL driver.

	We want to tanks the Authors of those projects
	and the Ndiswrapper project Authors.
*/

/* Mariusz Matuszek added full registers definition with Realtek's name */

/* this file contains register definitions for the rtl8180 MAC controller */
#ifndef R8180_HW
#define R8180_HW

#define CONFIG_RTL8185B  //support for rtl8185B, xiong-2006-11-15
#define CONFIG_RTL818X_S

#define BIT0	0x00000001
#define BIT1	0x00000002
#define BIT2	0x00000004
#define BIT3	0x00000008
#define BIT4	0x00000010
#define BIT5	0x00000020
#define BIT6	0x00000040
#define BIT7	0x00000080
#define BIT8	0x00000100
#define BIT9	0x00000200
#define BIT10	0x00000400
#define BIT11	0x00000800
#define BIT12	0x00001000
#define BIT13	0x00002000
#define BIT14	0x00004000
#define BIT15	0x00008000
#define BIT16	0x00010000
#define BIT17	0x00020000
#define BIT18	0x00040000
#define BIT19	0x00080000
#define BIT20	0x00100000
#define BIT21	0x00200000
#define BIT22	0x00400000
#define BIT23	0x00800000
#define BIT24	0x01000000
#define BIT25	0x02000000
#define BIT26	0x04000000
#define BIT27	0x08000000
#define BIT28	0x10000000
#define BIT29	0x20000000
#define BIT30	0x40000000
#define BIT31	0x80000000

#define MAX_SLEEP_TIME (10000)
#define MIN_SLEEP_TIME (50)

#define BB_ANTATTEN_CHAN14	0x0c
#define BB_ANTENNA_B 0x40

#define BB_HOST_BANG (1<<30)
#define BB_HOST_BANG_EN (1<<2)
#define BB_HOST_BANG_CLK (1<<1)
#define BB_HOST_BANG_DATA	 1

#define ANAPARAM_TXDACOFF_SHIFT 27
#define ANAPARAM_PWR0_MASK ((1<<30)|(1<<29)|(1<<28))
#define ANAPARAM_PWR0_SHIFT 28
#define ANAPARAM_PWR1_MASK ((1<<26)|(1<<25)|(1<<24)|(1<<23)|(1<<22)|(1<<21)|(1<<20))
#define ANAPARAM_PWR1_SHIFT 20

#define MAC0 0
#define MAC1 1
#define MAC2 2
#define MAC3 3
#define MAC4 4
#define MAC5 5
#define CMD 0x37
#define CMD_RST_SHIFT 4
#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
#define CMD_RX_ENABLE_SHIFT 3
#define CMD_TX_ENABLE_SHIFT 2

#define EPROM_CMD 0x50
#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4))
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_NORMAL 0
#define EPROM_CMD_LOAD 1
#define EPROM_CMD_PROGRAM 2
#define EPROM_CS_SHIFT 3
#define EPROM_CK_SHIFT 2
#define EPROM_W_SHIFT 1
#define EPROM_R_SHIFT 0
#define CONFIG2_DMA_POLLING_MODE_SHIFT 3
#define INTA 0x3e
#define INTA_TXOVERFLOW (1<<15)
#define INTA_TIMEOUT (1<<14)
#define INTA_BEACONTIMEOUT (1<<13)
#define INTA_ATIM (1<<12)
#define INTA_BEACONDESCERR (1<<11)
#define INTA_BEACONDESCOK (1<<10)
#define INTA_HIPRIORITYDESCERR (1<<9)
#define INTA_HIPRIORITYDESCOK (1<<8)
#define INTA_NORMPRIORITYDESCERR (1<<7)
#define INTA_NORMPRIORITYDESCOK (1<<6)
#define INTA_RXOVERFLOW (1<<5)
#define INTA_RXDESCERR (1<<4)
#define INTA_LOWPRIORITYDESCERR (1<<3)
#define INTA_LOWPRIORITYDESCOK (1<<2)
#define INTA_RXCRCERR (1<<1)
#define INTA_RXOK (1)
#define INTA_MASK 0x3c
#define RXRING_ADDR 0xe4 // page 0
#define PGSELECT 0x5e
#define PGSELECT_PG_SHIFT 0
#define RX_CONF 0x44
#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
#define RX_CHECK_BSSID_SHIFT 23
#define ACCEPT_PWR_FRAME_SHIFT 22
#define ACCEPT_MNG_FRAME_SHIFT 20
#define ACCEPT_CTL_FRAME_SHIFT 19
#define ACCEPT_DATA_FRAME_SHIFT 18
#define ACCEPT_ICVERR_FRAME_SHIFT 12
#define ACCEPT_CRCERR_FRAME_SHIFT 5
#define ACCEPT_BCAST_FRAME_SHIFT 3
#define ACCEPT_MCAST_FRAME_SHIFT 2
#define ACCEPT_ALLMAC_FRAME_SHIFT 0
#define ACCEPT_NICMAC_FRAME_SHIFT 1
#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
#define RX_FIFO_THRESHOLD_SHIFT 13
#define RX_FIFO_THRESHOLD_128 3
#define RX_FIFO_THRESHOLD_256 4
#define RX_FIFO_THRESHOLD_512 5
#define RX_FIFO_THRESHOLD_1024 6
#define RX_FIFO_THRESHOLD_NONE 7
#define RX_AUTORESETPHY_SHIFT 28
#define EPROM_TYPE_SHIFT 6
#define TX_CONF 0x40
#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
#define TX_LOOPBACK_SHIFT 17
#define TX_LOOPBACK_MAC 1
#define TX_LOOPBACK_BASEBAND 2
#define TX_LOOPBACK_NONE 0
#define TX_LOOPBACK_CONTINUE 3
#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
#define TX_DPRETRY_SHIFT 0
#define R8180_MAX_RETRY 255
#define TX_RTSRETRY_SHIFT 8
#define TX_NOICV_SHIFT 19
#define TX_NOCRC_SHIFT 16
#define TX_DMA_POLLING 0xd9
#define TX_DMA_POLLING_BEACON_SHIFT 7
#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
#define TX_DMA_STOP_BEACON_SHIFT 3
#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
#define TX_MANAGEPRIORITY_RING_ADDR 0x0C
#define TX_BKPRIORITY_RING_ADDR 0x10
#define TX_BEPRIORITY_RING_ADDR 0x14
#define TX_VIPRIORITY_RING_ADDR 0x20
#define TX_VOPRIORITY_RING_ADDR 0x24
#define TX_HIGHPRIORITY_RING_ADDR 0x28
//AC_VI and Low priority share the sane queue
#define TX_LOWPRIORITY_RING_ADDR TX_VIPRIORITY_RING_ADDR
//AC_VO and Norm priority share the same queue
#define TX_NORMPRIORITY_RING_ADDR TX_VOPRIORITY_RING_ADDR

#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
#define MAX_RX_DMA_2048 7
#define MAX_RX_DMA_1024	6
#define MAX_RX_DMA_SHIFT 10
#define INT_TIMEOUT 0x48
#define CONFIG3_CLKRUN_SHIFT 2
#define CONFIG3_ANAPARAM_W_SHIFT 6
#define ANAPARAM 0x54
#define BEACON_INTERVAL 0x70
#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
(1<<6)|(1<<7)|(1<<8)|(1<<9))
#define ATIM_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)| \
(1<<8)|(1<<9))
#define ATIM 0x72
#define EPROM_CS_SHIFT 3
#define EPROM_CK_SHIFT 2
#define PHY_DELAY 0x78
#define PHY_CONFIG 0x80
#define PHY_ADR 0x7c
#define PHY_READ 0x7e
#define CARRIER_SENSE_COUNTER 0x79 //byte
#define SECURITY 0x5f //1209 this is sth wrong
#define SECURITY_WEP_TX_ENABLE_SHIFT 1
#define SECURITY_WEP_RX_ENABLE_SHIFT 0
#define SECURITY_ENCRYP_104 1
#define SECURITY_ENCRYP_SHIFT 4
#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
#define KEY0 0x90  //1209 this is sth wrong
#define CONFIG2_ANTENNA_SHIFT 6
#define TX_BEACON_RING_ADDR 0x4c
#define CONFIG0_WEP40_SHIFT 7
#define CONFIG0_WEP104_SHIFT 6
#define AGCRESET_SHIFT 5


/*
 * Operational registers offsets in PCI (I/O) space.
 * RealTek names are used.
 */

#define IDR0 0x0000
#define IDR1 0x0001
#define IDR2 0x0002
#define IDR3 0x0003
#define IDR4 0x0004
#define IDR5 0x0005

/* 0x0006 - 0x0007 - reserved */

#define MAR0 0x0008
#define MAR1 0x0009
#define MAR2 0x000A
#define MAR3 0x000B
#define MAR4 0x000C
#define MAR5 0x000D
#define MAR6 0x000E
#define MAR7 0x000F

/* 0x0010 - 0x0017 - reserved */

#define TSFTR 0x0018
#define TSFTR_END 0x001F

#define TLPDA 0x0020
#define TLPDA_END 0x0023
#define TNPDA 0x0024
#define TNPDA_END 0x0027
#define THPDA 0x0028
#define THPDA_END 0x002B

#define BSSID 0x002E
#define BSSID_END 0x0033

#define CR 0x0037

#ifdef CONFIG_RTL8185B
#define RF_SW_CONFIG	        0x8			// store data which is transmitted to RF for driver
#define RF_SW_CFG_SI		BIT1
#define PIFS			0x2C			// PCF InterFrame Spacing Timer Setting.
#define EIFS			0x2D			// Extended InterFrame Space Timer, in unit of 4 us.

#define BRSR			0x34			// Basic rate set

#define IMR 0x006C
#define ISR 0x003C
#else
#define BRSR 0x002C
#define BRSR_END 0x002D

/* 0x0034 - 0x0034 - reserved */
#define EIFS 0x0035

#define IMR 0x003C
#define IMR_END 0x003D
#define ISR 0x003E
#define ISR_END 0x003F
#endif

#define TCR 0x0040
#define TCR_END 0x0043

#define RCR 0x0044
#define RCR_END 0x0047

#define TimerInt 0x0048
#define TimerInt_END 0x004B

#define TBDA 0x004C
#define TBDA_END 0x004F

#define CR9346 0x0050

#define CONFIG0 0x0051
#define CONFIG1 0x0052
#define CONFIG2 0x0053

#define ANA_PARM 0x0054
#define ANA_PARM_END 0x0x0057

#define MSR 0x0058

#define CONFIG3 0x0059
#define CONFIG4 0x005A
#ifdef CONFIG_RTL8185B
#ifdef CONFIG_RTL818X_S
	// SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6
	// Mac0x60 = 0x000004C6 power save parameters
	#define ANAPARM_ASIC_ON    0xB0054D00
	#define ANAPARM2_ASIC_ON  0x000004C6

	#define ANAPARM_ON ANAPARM_ASIC_ON
	#define ANAPARM2_ON ANAPARM2_ASIC_ON
#else
	// SD3 CMLin:
	#define ANAPARM_ASIC_ON    0x45090658
	#define ANAPARM2_ASIC_ON  0x727f3f52

	#define ANAPARM_ON ANAPARM_ASIC_ON
	#define ANAPARM2_ON ANAPARM2_ASIC_ON
#endif
#endif

#define TESTR 0x005B

/* 0x005C - 0x005D - reserved */

#define PSR 0x005E

/* 0x0060 - 0x006F - reserved */

#define BcnItv 0x0070
#define BcnItv_END 0x0071

#define AtimWnd 0x0072
#define AtimWnd_END 0x0073

#define BintrItv 0x0074
#define BintrItv_END 0x0075

#define AtimtrItv 0x0076
#define AtimtrItv_END 0x0077

#define PhyDelay 0x0078

#define CRCount 0x0079

/* 0x007A - 0x007B - reserved */

#define PhyAddr 0x007C
#define PhyDataW 0x007D
#define PhyDataR 0x007E

#define PhyCFG 0x0080
#define PhyCFG_END 0x0083

/* following are for rtl8185 */
#define RFPinsOutput 0x80
#define RFPinsEnable 0x82
#define RF_TIMING 0x8c
#define RFPinsSelect 0x84
#define ANAPARAM2 0x60
#define RF_PARA 0x88
#define RFPinsInput 0x86
#define GP_ENABLE 0x90
#define GPIO 0x91
#define SW_CONTROL_GPIO 0x400
#define TX_ANTENNA 0x9f
#define TX_GAIN_OFDM 0x9e
#define TX_GAIN_CCK 0x9d
#define WPA_CONFIG 0xb0
#define TX_AGC_CTL 0x9c
#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
#define TX_AGC_CTL_FEEDBACK_ANT 2
#define RESP_RATE 0x34
#define SIFS 0xb4
#define DIFS 0xb5

#define SLOT 0xb6
#define CW_CONF 0xbc
#define CW_CONF_PERPACKET_RETRY_SHIFT 1
#define CW_CONF_PERPACKET_CW_SHIFT 0
#define CW_VAL 0xbd
#define MAX_RESP_RATE_SHIFT 4
#define MIN_RESP_RATE_SHIFT 0
#define RATE_FALLBACK 0xbe
/*
 *  0x0084 - 0x00D3 is selected to page 1 when PSEn bit (bit0, PSR)
 *  is set to 1
 */

#define Wakeup0 0x0084
#define Wakeup0_END 0x008B

#define Wakeup1 0x008C
#define Wakeup1_END 0x0093

#define Wakeup2LD 0x0094
#define Wakeup2LD_END 0x009B
#define Wakeup2HD 0x009C
#define Wakeup2HD_END 0x00A3

#define Wakeup3LD 0x00A4
#define Wakeup3LD_END 0x00AB
#define Wakeup3HD 0x00AC
#define Wakeup3HD_END 0x00B3

#define Wakeup4LD 0x00B4
#define Wakeup4LD_END 0x00BB
#define Wakeup4HD 0x00BC
#define Wakeup4HD_END 0x00C3

#define CRC0 0x00C4
#define CRC0_END 0x00C5
#define CRC1 0x00C6
#define CRC1_END 0x00C7
#define CRC2 0x00C8
#define CRC2_END 0x00C9
#define CRC3 0x00CA
#define CRC3_END 0x00CB
#define CRC4 0x00CC
#define CRC4_END 0x00CD

/* 0x00CE - 0x00D3 - reserved */


/*
 *  0x0084 - 0x00D3 is selected to page 0 when PSEn bit (bit0, PSR)
 *  is set to 0
 */

/* 0x0084 - 0x008F - reserved */

#define DK0 0x0090
#define DK0_END 0x009F
#define DK1 0x00A0
#define DK1_END 0x00AF
#define DK2 0x00B0
#define DK2_END 0x00BF
#define DK3 0x00C0
#define DK3_END 0x00CF

/* 0x00D0 - 0x00D3 - reserved */


/* 0x00D4 - 0x00D7 - reserved */

#define CONFIG5 0x00D8

#define TPPoll 0x00D9

/* 0x00DA - 0x00DB - reserved */

#ifdef CONFIG_RTL818X_S
#define PHYPR			0xDA			//0xDA - 0x0B PHY Parameter Register.
#endif

#define CWR 0x00DC
#define CWR_END 0x00DD

#define RetryCTR 0x00DE

/* 0x00DF - 0x00E3 - reserved */

#define RDSAR 0x00E4
#define RDSAR_END 0x00E7

/* 0x00E8 - 0x00EF - reserved */
#ifdef CONFIG_RTL818X_S
#define LED_CONTROL		0xED
#endif

#define FER 0x00F0
#define FER_END 0x00F3

#ifdef CONFIG_RTL8185B
#define FEMR			0x1D4	// Function Event Mask register
#else
#define FEMR 0x00F4
#define FEMR_END 0x00F7
#endif

#define FPSR 0x00F8
#define FPSR_END 0x00FB

#define FFER 0x00FC
#define FFER_END 0x00FF


/*
 * Bitmasks for specific register functions.
 * Names are derived from the register name and function name.
 *
 * <REGISTER>_<FUNCTION>[<bit>]
 *
 * this leads to some awkward names...
 */

#define BRSR_BPLCP  ((1<< 8))
#define BRSR_MBR    ((1<< 1)|(1<< 0))
#define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0))
#define BRSR_MBR0   ((1<< 0))
#define BRSR_MBR1   ((1<< 1))

#define CR_RST      ((1<< 4))
#define CR_RE       ((1<< 3))
#define CR_TE       ((1<< 2))
#define CR_MulRW    ((1<< 0))

#ifdef CONFIG_RTL8185B
#define IMR_Dot11hInt	((1<< 25))			// 802.11h Measurement Interrupt
#define IMR_BcnDmaInt	((1<< 24))			// Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt???
#define IMR_WakeInt		((1<< 23))			// Wake Up Interrupt
#define IMR_TXFOVW		((1<< 22))			// Tx FIFO Overflow Interrupt
#define IMR_TimeOut1	((1<< 21))			// Time Out Interrupt 1
#define IMR_BcnInt		((1<< 20))			// Beacon Time out Interrupt
#define IMR_ATIMInt		((1<< 19))			// ATIM Time Out Interrupt
#define IMR_TBDER		((1<< 18))			// Tx Beacon Descriptor Error Interrupt
#define IMR_TBDOK		((1<< 17))			// Tx Beacon Descriptor OK Interrupt
#define IMR_THPDER		((1<< 16))			// Tx High Priority Descriptor Error Interrupt
#define IMR_THPDOK		((1<< 15))			// Tx High Priority Descriptor OK Interrupt
#define IMR_TVODER		((1<< 14))			// Tx AC_VO Descriptor Error Interrupt
#define IMR_TVODOK		((1<< 13))			// Tx AC_VO Descriptor OK Interrupt
#define IMR_FOVW		((1<< 12))			// Rx FIFO Overflow Interrupt
#define IMR_RDU			((1<< 11))			// Rx Descriptor Unavailable Interrupt
#define IMR_TVIDER		((1<< 10))			// Tx AC_VI Descriptor Error Interrupt
#define IMR_TVIDOK		((1<< 9))		// Tx AC_VI Descriptor OK Interrupt
#define IMR_RER			((1<< 8))		// Rx Error Interrupt
#define IMR_ROK			((1<< 7))		// Receive OK Interrupt
#define IMR_TBEDER		((1<< 6))			// Tx AC_BE Descriptor Error Interrupt
#define IMR_TBEDOK		((1<< 5))			// Tx AC_BE Descriptor OK Interrupt
#define IMR_TBKDER		((1<< 4))		// Tx AC_BK Descriptor Error Interrupt
#define IMR_TBKDOK		((1<< 3))			// Tx AC_BK Descriptor OK Interrupt
#define IMR_RQoSOK		((1<< 2))		// Rx QoS OK Interrupt
#define IMR_TimeOut2	((1<< 1))		// Time Out Interrupt 2
#define IMR_TimeOut3	((1<< 0))			// Time Out Interrupt 3
#define IMR_TMGDOK      ((1<<30))
#define ISR_Dot11hInt	((1<< 25))			// 802.11h Measurement Interrupt
#define ISR_BcnDmaInt	((1<< 24))			// Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt???
#define ISR_WakeInt		((1<< 23))			// Wake Up Interrupt
#define ISR_TXFOVW		((1<< 22))			// Tx FIFO Overflow Interrupt
#define ISR_TimeOut1	((1<< 21))			// Time Out Interrupt 1
#define ISR_BcnInt		((1<< 20))			// Beacon Time out Interrupt
#define ISR_ATIMInt		((1<< 19))			// ATIM Time Out Interrupt
#define ISR_TBDER		((1<< 18))			// Tx Beacon Descriptor Error Interrupt
#define ISR_TBDOK		((1<< 17))			// Tx Beacon Descriptor OK Interrupt
#define ISR_THPDER		((1<< 16))			// Tx High Priority Descriptor Error Interrupt
#define ISR_THPDOK		((1<< 15))			// Tx High Priority Descriptor OK Interrupt
#define ISR_TVODER		((1<< 14))			// Tx AC_VO Descriptor Error Interrupt
#define ISR_TVODOK		((1<< 13))			// Tx AC_VO Descriptor OK Interrupt
#define ISR_FOVW		((1<< 12))			// Rx FIFO Overflow Interrupt
#define ISR_RDU			((1<< 11))			// Rx Descriptor Unavailable Interrupt
#define ISR_TVIDER		((1<< 10))			// Tx AC_VI Descriptor Error Interrupt
#define ISR_TVIDOK		((1<< 9))		// Tx AC_VI Descriptor OK Interrupt
#define ISR_RER			((1<< 8))		// Rx Error Interrupt
#define ISR_ROK			((1<< 7))		// Receive OK Interrupt
#define ISR_TBEDER		((1<< 6))			// Tx AC_BE Descriptor Error Interrupt
#define ISR_TBEDOK		((1<< 5))			// Tx AC_BE Descriptor OK Interrupt
#define ISR_TBKDER		((1<< 4))		// Tx AC_BK Descriptor Error Interrupt
#define ISR_TBKDOK		((1<< 3))			// Tx AC_BK Descriptor OK Interrupt
#define ISR_RQoSOK		((1<< 2))		// Rx QoS OK Interrupt
#define ISR_TimeOut2	((1<< 1))		// Time Out Interrupt 2
#define ISR_TimeOut3	((1<< 0))			// Time Out Interrupt 3

//these definition is used for Tx/Rx test temporarily
#define ISR_TLPDER  ISR_TVIDER
#define ISR_TLPDOK  ISR_TVIDOK
#define ISR_TNPDER  ISR_TVODER
#define ISR_TNPDOK  ISR_TVODOK
#define ISR_TimeOut ISR_TimeOut1
#define ISR_RXFOVW ISR_FOVW

#else
#define IMR_TXFOVW  ((1<<15))
#define IMR_TimeOut ((1<<14))
#define IMR_BcnInt  ((1<<13))
#define IMR_ATIMInt ((1<<12))
#define IMR_TBDER   ((1<<11))
#define IMR_TBDOK   ((1<<10))
#define IMR_THPDER  ((1<< 9))
#define IMR_THPDOK  ((1<< 8))
#define IMR_TNPDER  ((1<< 7))
#define IMR_TNPDOK  ((1<< 6))
#define IMR_RXFOVW  ((1<< 5))
#define IMR_RDU     ((1<< 4))
#define IMR_TLPDER  ((1<< 3))
#define IMR_TLPDOK  ((1<< 2))
#define IMR_RER     ((1<< 1))
#define IMR_ROK     ((1<< 0))

#define ISR_TXFOVW  ((1<<15))
#define ISR_TimeOut ((1<<14))
#define ISR_BcnInt  ((1<<13))
#define ISR_ATIMInt ((1<<12))
#define ISR_TBDER   ((1<<11))
#define ISR_TBDOK   ((1<<10))
#define ISR_THPDER  ((1<< 9))
#define ISR_THPDOK  ((1<< 8))
#define ISR_TNPDER  ((1<< 7))
#define ISR_TNPDOK  ((1<< 6))
#define ISR_RXFOVW  ((1<< 5))
#define ISR_RDU     ((1<< 4))
#define ISR_TLPDER  ((1<< 3))
#define ISR_TLPDOK  ((1<< 2))
#define ISR_RER     ((1<< 1))
#define ISR_ROK     ((1<< 0))
#endif

#define HW_VERID_R8180_F 3
#define HW_VERID_R8180_ABCD 2
#define HW_VERID_R8185_ABC 4
#define HW_VERID_R8185_D 5
#ifdef CONFIG_RTL8185B
#define HW_VERID_R8185B_B 6
#endif

#define TCR_CWMIN   ((1<<31))
#define TCR_SWSEQ   ((1<<30))
#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))
#define TCR_HWVERID_SHIFT 25
#define TCR_SAT     ((1<<24))
#define TCR_PLCP_LEN TCR_SAT // rtl8180
#define TCR_MXDMA_MASK   ((1<<23)|(1<<22)|(1<<21))
#define TCR_MXDMA_1024 6
#define TCR_MXDMA_2048 7
#define TCR_MXDMA_SHIFT  21
#define TCR_DISCW   ((1<<20))
#define TCR_ICV     ((1<<19))
#define TCR_LBK     ((1<<18)|(1<<17))
#define TCR_LBK1    ((1<<18))
#define TCR_LBK0    ((1<<17))
#define TCR_CRC     ((1<<16))
#define TCR_DPRETRY_MASK   ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))
#define TCR_RTSRETRY_MASK   ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))
#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185

#define RCR_ONLYERLPKT ((1<<31))
#define RCR_CS_SHIFT   29
#define RCR_CS_MASK    ((1<<30) | (1<<29))
#define RCR_ENMARP     ((1<<28))
#define RCR_CBSSID     ((1<<23))
#define RCR_APWRMGT    ((1<<22))
#define RCR_ADD3       ((1<<21))
#define RCR_AMF        ((1<<20))
#define RCR_ACF        ((1<<19))
#define RCR_ADF        ((1<<18))
#define RCR_RXFTH      ((1<<15)|(1<<14)|(1<<13))
#define RCR_RXFTH2     ((1<<15))
#define RCR_RXFTH1     ((1<<14))
#define RCR_RXFTH0     ((1<<13))
#define RCR_AICV       ((1<<12))
#define RCR_MXDMA      ((1<<10)|(1<< 9)|(1<< 8))
#define RCR_MXDMA2     ((1<<10))
#define RCR_MXDMA1     ((1<< 9))
#define RCR_MXDMA0     ((1<< 8))
#define RCR_9356SEL    ((1<< 6))
#define RCR_ACRC32     ((1<< 5))
#define RCR_AB         ((1<< 3))
#define RCR_AM         ((1<< 2))
#define RCR_APM        ((1<< 1))
#define RCR_AAP        ((1<< 0))

#define CR9346_EEM     ((1<<7)|(1<<6))
#define CR9346_EEM1    ((1<<7))
#define CR9346_EEM0    ((1<<6))
#define CR9346_EECS    ((1<<3))
#define CR9346_EESK    ((1<<2))
#define CR9346_EED1    ((1<<1))
#define CR9346_EED0    ((1<<0))

#define CONFIG0_WEP104     ((1<<6))
#define CONFIG0_LEDGPO_En  ((1<<4))
#define CONFIG0_Aux_Status ((1<<3))
#define CONFIG0_GL         ((1<<1)|(1<<0))
#define CONFIG0_GL1        ((1<<1))
#define CONFIG0_GL0        ((1<<0))

#define CONFIG1_LEDS       ((1<<7)|(1<<6))
#define CONFIG1_LEDS1      ((1<<7))
#define CONFIG1_LEDS0      ((1<<6))
#define CONFIG1_LWACT      ((1<<4))
#define CONFIG1_MEMMAP     ((1<<3))
#define CONFIG1_IOMAP      ((1<<2))
#define CONFIG1_VPD        ((1<<1))
#define CONFIG1_PMEn       ((1<<0))

#define CONFIG2_LCK        ((1<<7))
#define CONFIG2_ANT        ((1<<6))
#define CONFIG2_DPS        ((1<<3))
#define CONFIG2_PAPE_sign  ((1<<2))
#define CONFIG2_PAPE_time  ((1<<1)|(1<<0))
#define CONFIG2_PAPE_time1 ((1<<1))
#define CONFIG2_PAPE_time0 ((1<<0))

#define CONFIG3_GNTSel     ((1<<7))
#define CONFIG3_PARM_En    ((1<<6))
#define CONFIG3_Magic      ((1<<5))
#define CONFIG3_CardB_En   ((1<<3))
#define CONFIG3_CLKRUN_En  ((1<<2))
#define CONFIG3_FuncRegEn  ((1<<1))
#define CONFIG3_FBtbEn     ((1<<0))

#define CONFIG4_VCOPDN     ((1<<7))
#define CONFIG4_PWROFF     ((1<<6))
#define CONFIG4_PWRMGT     ((1<<5))
#define CONFIG4_LWPME      ((1<<4))
#define CONFIG4_LWPTN      ((1<<2))
#define CONFIG4_RFTYPE     ((1<<1)|(1<<0))
#define CONFIG4_RFTYPE1    ((1<<1))
#define CONFIG4_RFTYPE0    ((1<<0))

#define CONFIG5_TX_FIFO_OK ((1<<7))
#define CONFIG5_RX_FIFO_OK ((1<<6))
#define CONFIG5_CALON      ((1<<5))
#define CONFIG5_EACPI      ((1<<2))
#define CONFIG5_LANWake    ((1<<1))
#define CONFIG5_PME_STS    ((1<<0))

#define MSR_LINK_MASK      ((1<<2)|(1<<3))
#define MSR_LINK_MANAGED   2
#define MSR_LINK_NONE      0
#define MSR_LINK_SHIFT     2
#define MSR_LINK_ADHOC     1
#define MSR_LINK_MASTER    3

#define PSR_GPO            ((1<<7))
#define PSR_GPI            ((1<<6))
#define PSR_LEDGPO1        ((1<<5))
#define PSR_LEDGPO0        ((1<<4))
#define PSR_UWF            ((1<<1))
#define PSR_PSEn           ((1<<0))

#define SCR_KM             ((1<<5)|(1<<4))
#define SCR_KM1            ((1<<5))
#define SCR_KM0            ((1<<4))
#define SCR_TXSECON        ((1<<1))
#define SCR_RXSECON        ((1<<0))

#define BcnItv_BcnItv      (0x01FF)

#define AtimWnd_AtimWnd    (0x01FF)

#define BintrItv_BintrItv  (0x01FF)

#define AtimtrItv_AtimtrItv (0x01FF)

#define PhyDelay_PhyDelay  ((1<<2)|(1<<1)|(1<<0))

#define TPPoll_BQ    ((1<<7))
#define TPPoll_HPQ   ((1<<6))
#define TPPoll_NPQ   ((1<<5))
#define TPPoll_LPQ   ((1<<4))
#define TPPoll_SBQ   ((1<<3))
#define TPPoll_SHPQ  ((1<<2))
#define TPPoll_SNPQ  ((1<<1))
#define TPPoll_SLPQ  ((1<<0))

#define CWR_CW       (0x01FF)

#define FER_INTR     ((1<<15))
#define FER_GWAKE    ((1<< 4))

#define FEMR_INTR    ((1<<15))
#define FEMR_WKUP    ((1<<14))
#define FEMR_GWAKE   ((1<< 4))

#define FPSR_INTR    ((1<<15))
#define FPSR_GWAKE   ((1<< 4))

#define FFER_INTR    ((1<<15))
#define FFER_GWAKE   ((1<< 4))

#ifdef CONFIG_RTL8185B
// Three wire mode.
#define SW_THREE_WIRE			0
#define HW_THREE_WIRE			2
//RTL8187S by amy
#define HW_THREE_WIRE_PI		5
#define HW_THREE_WIRE_SI		6
//by amy
#define TCR_LRL_OFFSET		0
#define TCR_SRL_OFFSET		8
#define TCR_MXDMA_OFFSET	21
#define TCR_DISReqQsize_OFFSET		28
#define TCR_DurProcMode_OFFSET		30

#define RCR_MXDMA_OFFSET				8
#define RCR_FIFO_OFFSET					13

#define TMGDS			0x0C			// Tx Management Descriptor Address
#define TBKDS			0x10			// Tx AC_BK Descriptor Address
#define TBEDS			0x14			// Tx AC_BE Descriptor Address
#define TLPDS			0x20			// Tx AC_VI Descriptor Address
#define TNPDS			0x24			// Tx AC_VO Descriptor Address
#define THPDS			0x28			// Tx Hign Priority Descriptor Address

#define TBDS			0x4c			// Beacon descriptor queue start address

#define RDSA			0xE4			// Receive descriptor queue start address

#define AckTimeOutReg	0x79		// ACK timeout register, in unit of 4 us.

#define RFTiming			0x8C

#define TPPollStop 		0x93

#define TXAGC_CTL		0x9C			// <RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37).
#define CCK_TXAGC		0x9D
#define OFDM_TXAGC		0x9E
#define ANTSEL			0x9F

#define ACM_CONTROL             0x00BF      // ACM Control Registe

#define RTL8185B_VER_REG    0xE1

#define	IntMig			0xE2			// Interrupt Migration (0xE2 ~ 0xE3)

#define TID_AC_MAP		0xE8			// TID to AC Mapping Register

#define ANAPARAM3		0xEE			// <RJ_TODO_8185B> How to use it?

#define AC_VO_PARAM		0xF0			// AC_VO Parameters Record
#define AC_VI_PARAM		0xF4			// AC_VI Parameters Record
#define AC_BE_PARAM		0xF8			// AC_BE Parameters Record
#define AC_BK_PARAM		0xFC			// AC_BK Parameters Record

#ifdef CONFIG_RTL818X_S
#define BcnTimingAdjust	0x16A			// Beacon Timing Adjust Register.
#define GPIOCtrl			0x16B			// GPIO Control Register.
#define PSByGC			0x180			// 0x180 - 0x183 Power Saving by Gated Clock.
#endif
#define ARFR			0x1E0	// Auto Rate Fallback Register (0x1e0 ~ 0x1e2)

#define RFSW_CTRL			0x272	// 0x272-0x273.
#define SW_3W_DB0			0x274	// Software 3-wire data buffer bit 31~0.
#define SW_3W_DB1			0x278	// Software 3-wire data buffer bit 63~32.
#define SW_3W_CMD0			0x27C	// Software 3-wire Control/Status Register.
#define SW_3W_CMD1			0x27D	// Software 3-wire Control/Status Register.

#ifdef CONFIG_RTL818X_S
#define PI_DATA_READ		0X360	// 0x360 - 0x361  Parallel Interface Data Register.
#define SI_DATA_READ		0x362	// 0x362 - 0x363  Serial Interface Data Register.
#endif

//----------------------------------------------------------------------------
//       8185B TPPoll bits 				(offset 0xd9, 1 byte)
//----------------------------------------------------------------------------
#define TPPOLL_BQ			(0x01 << 7)
#define TPPOLL_HPQ			(0x01 << 6)
#define TPPOLL_AC_VOQ		(0x01 << 5)
#define TPPOLL_AC_VIQ		(0x01 << 4)
#define TPPOLL_AC_BEQ		(0x01 << 3)
#define TPPOLL_AC_BKQ		(0x01 << 2)
#define TPPOLL_AC_MGQ		(0x01 << 1)

//----------------------------------------------------------------------------
//       8185B TPPollStop bits 				(offset 0x93, 1 byte)
//----------------------------------------------------------------------------
#define TPPOLLSTOP_BQ			(0x01 << 7)
#define TPPOLLSTOP_HPQ			(0x01 << 6)
#define TPPOLLSTOP_AC_VOQ		(0x01 << 5)
#define TPPOLLSTOP_AC_VIQ		(0x01 << 4)
#define TPPOLLSTOP_AC_BEQ		(0x01 << 3)
#define TPPOLLSTOP_AC_BKQ		(0x01 << 2)
#define TPPOLLSTOP_AC_MGQ		(0x01 << 1)


#define MSR_LINK_ENEDCA	   (1<<4)

//----------------------------------------------------------------------------
//       8187B AC_XX_PARAM bits
//----------------------------------------------------------------------------
#define AC_PARAM_TXOP_LIMIT_OFFSET		16
#define AC_PARAM_ECW_MAX_OFFSET			12
#define AC_PARAM_ECW_MIN_OFFSET			8
#define AC_PARAM_AIFS_OFFSET			0

//----------------------------------------------------------------------------
//       8187B ACM_CONTROL bits						(Offset 0xBF, 1 Byte)
//----------------------------------------------------------------------------
#define VOQ_ACM_EN				(0x01 << 7) //BIT7
#define VIQ_ACM_EN				(0x01 << 6) //BIT6
#define BEQ_ACM_EN				(0x01 << 5) //BIT5
#define ACM_HW_EN				(0x01 << 4) //BIT4
#define TXOPSEL					(0x01 << 3) //BIT3
#define VOQ_ACM_CTL				(0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
#define VIQ_ACM_CTL				(0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
#define BEQ_ACM_CTL				(0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time


//----------------------------------------------------------------------------
//       8185B SW_3W_CMD bits					(Offset 0x27C-0x27D, 16bit)
//----------------------------------------------------------------------------
#define SW_3W_CMD0_HOLD		((1<< 7))
#define SW_3W_CMD1_RE		 	((1<< 0)) // BIT8
#define SW_3W_CMD1_WE		((1<< 1)) // BIT9
#define SW_3W_CMD1_DONE		((1<< 2)) // BIT10

#define BB_HOST_BANG_RW 	(1<<3)

//----------------------------------------------------------------------------
//       8185B RATE_FALLBACK_CTL bits				(Offset 0xBE, 8bit)
//----------------------------------------------------------------------------
#define RATE_FALLBACK_CTL_ENABLE				((1<< 7))
#define RATE_FALLBACK_CTL_ENABLE_RTSCTS		((1<< 6))
// Auto rate fallback per 2^n retry.
#define RATE_FALLBACK_CTL_AUTO_STEP0	0x00
#define RATE_FALLBACK_CTL_AUTO_STEP1	0x01
#define RATE_FALLBACK_CTL_AUTO_STEP2	0x02
#define RATE_FALLBACK_CTL_AUTO_STEP3	0x03


#define RTL8225z2_ANAPARAM_OFF	0x55480658
#define RTL8225z2_ANAPARAM2_OFF	0x72003f70
//by amy for power save
#define RF_CHANGE_BY_SW BIT31
#define RF_CHANGE_BY_HW BIT30
#define RF_CHANGE_BY_PS BIT29
#define RF_CHANGE_BY_IPS BIT28
//by amy for power save
//by amy for antenna
#define EEPROM_SW_REVD_OFFSET 0x3f
// BIT[8-9] is for SW Antenna Diversity. Only the value EEPROM_SW_AD_ENABLE means enable, other values are diable.
#define EEPROM_SW_AD_MASK			0x0300
#define EEPROM_SW_AD_ENABLE			0x0100

// BIT[10-11] determine if Antenna 1 is the Default Antenna. Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE.
#define EEPROM_DEF_ANT_MASK			0x0C00
#define EEPROM_DEF_ANT_1			0x0400
//by amy for antenna
//{by amy 080312
//0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10.
#define EEPROM_RSV						0x7C
#define EEPROM_XTAL_CAL_MASK			0x00FF	// 0x7C[7:0], Crystal calibration mask.
#define EEPROM_XTAL_CAL_XOUT_MASK	0x0F	// 0x7C[3:0], Crystal calibration for Xout.
#define EEPROM_XTAL_CAL_XIN_MASK		0xF0	// 0x7C[7:4], Crystal calibration for Xin.
#define EEPROM_THERMAL_METER_MASK	0x0F00	// 0x7D[3:0], Thermal meter reference level.
#define EEPROM_XTAL_CAL_ENABLE		0x1000	// 0x7D[4], Crystal calibration enabled/disabled BIT.
#define EEPROM_THERMAL_METER_ENABLE	0x2000	// 0x7D[5], Thermal meter enabled/disabled BIT.
#define EEPROM_CID_RSVD1				0x3F
#define EN_LPF_CAL			0x238	// Enable LPF Calibration.
#define PWR_METER_EN		BIT1
// <RJ_TODO_8185B> where are false alarm counters in 8185B?
#define CCK_FALSE_ALARM		0xD0
#define OFDM_FALSE_ALARM	0xD2
//by amy 080312}

//YJ,add for Country IE, 080630
#define EEPROM_COUNTRY_CODE  0x2E
//YJ,add,080630,end
#endif

#endif