powerpc/prom_init: Evaluate mem kernel parameter for early allocation
Evaluate mem kernel parameter for early memory allocations. If mem is set
no allocation in the region above the given boundary is allowed. The current
code doesn't take care about this and allocate memory above the given mem
boundary.
Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d942404..864334b 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -190,6 +190,8 @@
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
+static unsigned long __initdata prom_memory_limit;
+
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
@@ -484,6 +486,67 @@
return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
}
+/* We can't use the standard versions because of RELOC headaches. */
+#define isxdigit(c) (('0' <= (c) && (c) <= '9') \
+ || ('a' <= (c) && (c) <= 'f') \
+ || ('A' <= (c) && (c) <= 'F'))
+
+#define isdigit(c) ('0' <= (c) && (c) <= '9')
+#define islower(c) ('a' <= (c) && (c) <= 'z')
+#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
+
+unsigned long prom_strtoul(const char *cp, const char **endp)
+{
+ unsigned long result = 0, base = 10, value;
+
+ if (*cp == '0') {
+ base = 8;
+ cp++;
+ if (toupper(*cp) == 'X') {
+ cp++;
+ base = 16;
+ }
+ }
+
+ while (isxdigit(*cp) &&
+ (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
+ result = result * base + value;
+ cp++;
+ }
+
+ if (endp)
+ *endp = cp;
+
+ return result;
+}
+
+unsigned long prom_memparse(const char *ptr, const char **retptr)
+{
+ unsigned long ret = prom_strtoul(ptr, retptr);
+ int shift = 0;
+
+ /*
+ * We can't use a switch here because GCC *may* generate a
+ * jump table which won't work, because we're not running at
+ * the address we're linked at.
+ */
+ if ('G' == **retptr || 'g' == **retptr)
+ shift = 30;
+
+ if ('M' == **retptr || 'm' == **retptr)
+ shift = 20;
+
+ if ('K' == **retptr || 'k' == **retptr)
+ shift = 10;
+
+ if (shift) {
+ ret <<= shift;
+ (*retptr)++;
+ }
+
+ return ret;
+}
+
/*
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
@@ -491,9 +554,8 @@
static void __init early_cmdline_parse(void)
{
struct prom_t *_prom = &RELOC(prom);
-#ifdef CONFIG_PPC64
const char *opt;
-#endif
+
char *p;
int l = 0;
@@ -521,6 +583,15 @@
RELOC(prom_iommu_force_on) = 1;
}
#endif
+ opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+ if (opt) {
+ opt += 4;
+ RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+#ifdef CONFIG_PPC64
+ /* Align to 16 MB == size of ppc64 large page */
+ RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
+ }
}
#ifdef CONFIG_PPC_PSERIES
@@ -1027,6 +1098,29 @@
}
/*
+ * If prom_memory_limit is set we reduce the upper limits *except* for
+ * alloc_top_high. This must be the real top of RAM so we can put
+ * TCE's up there.
+ */
+
+ RELOC(alloc_top_high) = RELOC(ram_top);
+
+ if (RELOC(prom_memory_limit)) {
+ if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+ prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+ prom_printf("Ignoring mem=%x >= ram_top.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else {
+ RELOC(ram_top) = RELOC(prom_memory_limit);
+ RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+ }
+ }
+
+ /*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
* Some RS64 machines have buggy firmware where claims up at
@@ -1041,6 +1135,7 @@
RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
+ prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
@@ -2395,6 +2490,10 @@
/*
* Fill in some infos for use by the kernel later on
*/
+ if (RELOC(prom_memory_limit))
+ prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+ &RELOC(prom_memory_limit),
+ sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(prom_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
