Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"The most notable new addition inside this pull request is the support
for MIPS's latest and greatest core called "inter/proAptiv". The
patch series describes this core as follows.
"The interAptiv is a power-efficient multi-core microprocessor
for use in system-on-chip (SoC) applications. The interAptiv combines
a multi-threading pipeline with a coherence manager to deliver improved
computational throughput and power efficiency. The interAptiv can
contain one to four MIPS32R3 interAptiv cores, system level
coherence manager with L2 cache, optional coherent I/O port,
and optional floating point unit."
The platform specific patches touch all 3 Broadcom families. It adds
support for the new Broadcom/Netlogix XLP9xx Soc, building a common
BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count
and full gpio button/led descriptions for BCM47xx.
The rest of the series are cleanups and bug fixes that are MIPS
generic and consist largely of changes that Imgtec/MIPS had published
in their linux-mti-3.10.git stable tree. Random other cleanups and
patches preparing code to be merged in 3.15"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
mips: select ARCH_MIGHT_HAVE_PC_SERIO
mips: delete non-required instances of include <linux/init.h>
MIPS: KVM: remove shadow_tlb code
MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI
mips/ide: flush dcache also if icache does not snoop dcache
MIPS: BCM47XX: fix position of cpu_wait disabling
MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value
MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N>
MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>
MIPS: ZBOOT: gather string functions into string.c
arch/mips/pci: don't check resource with devm_ioremap_resource
arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource
bcma: gpio: don't cast u32 to unsigned long
ssb: gpio: add own IRQ domain
MIPS: BCM47XX: fix sparse warnings in board.c
MIPS: BCM47XX: add board detection for Linksys WRT54GS V1
MIPS: BCM47XX: fix detection for some boards
MIPS: BCM47XX: Enable buttons support on SSB
MIPS: BCM47XX: Convert WNDR4500 to new syntax
MIPS: BCM47XX: Use "timer" trigger for status LEDs
...
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c02f1c0..dcae3a7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -116,7 +116,6 @@
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select FW_CFE
select HW_HAS_PCI
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@@ -124,6 +123,7 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
+ select EARLY_PRINTK_8250 if EARLY_PRINTK
help
Support for BCM47XX based boards
@@ -134,14 +134,13 @@
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SWAP_IO_SPACE
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select MIPS_L1_CACHE_SHIFT_4
help
Support for BCM63XX based boards
@@ -186,6 +185,7 @@
select SYS_SUPPORTS_128HZ
select SYS_SUPPORTS_256HZ
select SYS_SUPPORTS_1024HZ
+ select MIPS_L1_CACHE_SHIFT_4
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
@@ -305,7 +305,7 @@
select CEVT_R4K
select CSRC_R4K
select CSRC_GIC
- select DMA_NONCOHERENT
+ select DMA_MAYBE_COHERENT
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select IRQ_CPU
@@ -324,7 +324,6 @@
select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
- select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -349,6 +348,7 @@
select DMA_NONCOHERENT
select IRQ_CPU
select IRQ_GIC
+ select LIBFDT
select MIPS_MSC
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
@@ -471,6 +471,7 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -491,6 +492,7 @@
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -697,6 +699,7 @@
select SWAP_IO_SPACE
select BOOT_RAW
select ARCH_REQUIRE_GPIOLIB
+ select MIPS_L1_CACHE_SHIFT_4
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
@@ -779,6 +782,7 @@
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
+ select ARCH_SUPPORTS_MSI
select ZONE_DMA32 if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
@@ -897,6 +901,10 @@
config ARCH_DMA_ADDR_T_64BIT
def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT
+config DMA_MAYBE_COHERENT
+ select DMA_NONCOHERENT
+ bool
+
config DMA_COHERENT
bool
@@ -1091,11 +1099,24 @@
config BOOT_ELF32
bool
+config MIPS_L1_CACHE_SHIFT_4
+ bool
+
+config MIPS_L1_CACHE_SHIFT_5
+ bool
+
+config MIPS_L1_CACHE_SHIFT_6
+ bool
+
+config MIPS_L1_CACHE_SHIFT_7
+ bool
+
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
- default "6" if MIPS_CPU_SCACHE
- default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
+ default "4" if MIPS_L1_CACHE_SHIFT_4
+ default "5" if MIPS_L1_CACHE_SHIFT_5
+ default "6" if MIPS_L1_CACHE_SHIFT_6
+ default "7" if MIPS_L1_CACHE_SHIFT_7
default "5"
config HAVE_STD_PC_SERIAL_PORT
@@ -1375,47 +1396,31 @@
select LIBFDT
select USE_OF
select USB_EHCI_BIG_ENDIAN_MMIO
+ select SYS_HAS_DMA_OPS
+ select MIPS_L1_CACHE_SHIFT_7
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
Full details can be found at http://www.caviumnetworks.com.
-config CPU_BMIPS3300
- bool "BMIPS3300"
- depends on SYS_HAS_CPU_BMIPS3300
- select CPU_BMIPS
- help
- Broadcom BMIPS3300 processors.
-
-config CPU_BMIPS4350
- bool "BMIPS4350"
- depends on SYS_HAS_CPU_BMIPS4350
- select CPU_BMIPS
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
- help
- Broadcom BMIPS4350 ("VIPER") processors.
-
-config CPU_BMIPS4380
- bool "BMIPS4380"
- depends on SYS_HAS_CPU_BMIPS4380
- select CPU_BMIPS
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
- help
- Broadcom BMIPS4380 processors.
-
-config CPU_BMIPS5000
- bool "BMIPS5000"
- depends on SYS_HAS_CPU_BMIPS5000
- select CPU_BMIPS
+config CPU_BMIPS
+ bool "Broadcom BMIPS"
+ depends on SYS_HAS_CPU_BMIPS
+ select CPU_MIPS32
+ select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
+ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
+ select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
+ select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
- select MIPS_CPU_SCACHE
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
+ select CPU_HAS_PREFETCH
help
- Broadcom BMIPS5000 processors.
+ Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
config CPU_XLR
bool "Netlogic XLR SoC"
@@ -1498,14 +1503,25 @@
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
-config CPU_BMIPS
+config CPU_BMIPS32_3300
+ select SMP_UP if SMP
bool
- select CPU_MIPS32
- select CPU_SUPPORTS_32BIT_KERNEL
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
- select WEAK_ORDERING
+
+config CPU_BMIPS4350
+ bool
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
+
+config CPU_BMIPS4380
+ bool
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
+
+config CPU_BMIPS5000
+ bool
+ select MIPS_CPU_SCACHE
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
config SYS_HAS_CPU_LOONGSON2E
bool
@@ -1579,17 +1595,24 @@
config SYS_HAS_CPU_CAVIUM_OCTEON
bool
-config SYS_HAS_CPU_BMIPS3300
+config SYS_HAS_CPU_BMIPS
bool
+config SYS_HAS_CPU_BMIPS32_3300
+ bool
+ select SYS_HAS_CPU_BMIPS
+
config SYS_HAS_CPU_BMIPS4350
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS4380
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS5000
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_XLR
bool
@@ -1797,6 +1820,7 @@
config MIPS_CPU_SCACHE
bool
select BOARD_SCACHE
+ select MIPS_L1_CACHE_SHIFT_6
config R5000_CPU_SCACHE
bool
@@ -1833,59 +1857,48 @@
prompt "MIPS MT options"
config MIPS_MT_DISABLED
- bool "Disable multithreading support."
+ bool "Disable multithreading support"
help
- Use this option if your workload can't take advantage of
- MIPS hardware multithreading support. On systems that don't have
- the option of an MT-enabled processor this option will be the only
- option in this menu.
+ Use this option if your platform does not support the MT ASE
+ which is hardware multithreading support. On systems without
+ an MT-enabled processor, this will be the only option that is
+ available in this menu.
config MIPS_MT_SMP
bool "Use 1 TC on each available VPE for SMP"
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
+ select SYNC_R4K
select MIPS_MT
select SMP
- select SYS_SUPPORTS_SCHED_SMT if SMP
- select SYS_SUPPORTS_SMP
select SMP_UP
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_SCHED_SMT
select MIPS_PERF_SHARED_TC_COUNTERS
help
- This is a kernel model which is known a VSMP but lately has been
- marketesed into SMVP.
- Virtual SMP uses the processor's VPEs to implement virtual
- processors. In currently available configuration of the 34K processor
- this allows for a dual processor. Both processors will share the same
- primary caches; each will obtain the half of the TLB for it's own
- exclusive use. For a layman this model can be described as similar to
- what Intel calls Hyperthreading.
-
- For further information see http://www.linux-mips.org/wiki/34K#VSMP
+ This is a kernel model which is known as SMVP. This is supported
+ on cores with the MT ASE and uses the available VPEs to implement
+ virtual processors which supports SMP. This is equivalent to the
+ Intel Hyperthreading feature. For further information go to
+ <http://www.imgtec.com/mips/mips-multithreading.asp>.
config MIPS_MT_SMTC
- bool "SMTC: Use all TCs on all VPEs for SMP"
+ bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
depends on CPU_MIPS32_R2
- #depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select MIPS_MT
- select NR_CPUS_DEFAULT_8
select SMP
- select SYS_SUPPORTS_SMP
select SMP_UP
+ select SYS_SUPPORTS_SMP
+ select NR_CPUS_DEFAULT_8
help
- This is a kernel model which is known a SMTC or lately has been
- marketesed into SMVP.
- is presenting the available TC's of the core as processors to Linux.
- On currently available 34K processors this means a Linux system will
- see up to 5 processors. The implementation of the SMTC kernel differs
- significantly from VSMP and cannot efficiently coexist in the same
- kernel binary so the choice between VSMP and SMTC is a compile time
- decision.
-
- For further information see http://www.linux-mips.org/wiki/34K#SMTC
+ This is a kernel model which is known as SMTC. This is
+ supported on cores with the MT ASE and presents all TCs
+ available on all VPEs to support SMP. For further
+ information see <http://www.linux-mips.org/wiki/34K#SMTC>.
endchoice
@@ -1922,6 +1935,16 @@
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
+config MIPS_VPE_LOADER_CMP
+ bool
+ default "y"
+ depends on MIPS_VPE_LOADER && MIPS_CMP
+
+config MIPS_VPE_LOADER_MT
+ bool
+ default "y"
+ depends on MIPS_VPE_LOADER && !MIPS_CMP
+
config MIPS_MT_SMTC_IM_BACKSTOP
bool "Use per-TC register bits as backstop for inhibited IM bits"
depends on MIPS_MT_SMTC
@@ -1955,24 +1978,29 @@
you to ensure the amount you put in the option and the space your
program requires is less or equal to the amount physically present.
-# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
config MIPS_VPE_APSP_API
bool "Enable support for AP/SP API (RTLX)"
depends on MIPS_VPE_LOADER
help
+config MIPS_VPE_APSP_API_CMP
+ bool
+ default "y"
+ depends on MIPS_VPE_APSP_API && MIPS_CMP
+
+config MIPS_VPE_APSP_API_MT
+ bool
+ default "y"
+ depends on MIPS_VPE_APSP_API && !MIPS_CMP
+
config MIPS_CMP
- bool "MIPS CMP framework support"
- depends on SYS_SUPPORTS_MIPS_CMP
- select SMP
+ bool "MIPS CMP support"
+ depends on SYS_SUPPORTS_MIPS_CMP && MIPS_MT_SMP
select SYNC_R4K
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_SCHED_SMT if SMP
select WEAK_ORDERING
default n
help
- This is a placeholder option for the GCMP work. It will need to
- be handled differently...
+ Enable Coherency Manager processor (CMP) support.
config SB1_PASS_1_WORKAROUNDS
bool
@@ -2324,6 +2352,23 @@
If unsure, say Y. Only embedded should say N here.
+config MIPS_O32_FP64_SUPPORT
+ bool "Support for O32 binaries using 64-bit FP"
+ depends on 32BIT || MIPS32_O32
+ default y
+ help
+ When this is enabled, the kernel will support use of 64-bit floating
+ point registers with binaries using the O32 ABI along with the
+ EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On
+ 32-bit MIPS systems this support is at the cost of increasing the
+ size and complexity of the compiled FPU emulator. Thus if you are
+ running a MIPS32 system and know that none of your userland binaries
+ will require 64-bit floating point, you may wish to reduce the size
+ of your kernel & potentially improve FP emulation performance by
+ saying N here.
+
+ If unsure, say Y.
+
config USE_OF
bool
select OF
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index efe50787..9b8556d 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -114,7 +114,7 @@
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips)
-cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips -mno-jals)
+cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips)
cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
-fno-omit-frame-pointer
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 0c7fce2..bdb28dee 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -29,7 +29,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
#include <linux/pm.h>
#include <linux/sysctl.h>
#include <linux/jiffies.h>
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
index 22c9321..1dc6c3b 100644
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@@ -18,7 +18,6 @@
* Setting up the clock on the MIPS boards.
*/
-#include <linux/init.h>
#include <linux/time.h>
#include <linux/err.h>
#include <linux/clk.h>
diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h
index 648d2da..a312071 100644
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -15,7 +15,6 @@
#define __ATH79_COMMON_H
#include <linux/types.h>
-#include <linux/init.h>
#define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024)
#define ATH79_MEM_SIZE_MAX (128 * 1024 * 1024)
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index 2b8b118..09cb6f7 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -2,6 +2,7 @@
config BCM47XX_SSB
bool "SSB Support for Broadcom BCM47XX"
+ select SYS_HAS_CPU_BMIPS32_3300
select SSB
select SSB_DRIVER_MIPS
select SSB_DRIVER_EXTIF
@@ -11,6 +12,7 @@
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
select GPIOLIB
+ select LEDS_GPIO_REGISTER
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -20,6 +22,7 @@
config BCM47XX_BCMA
bool "BCMA Support for Broadcom BCM47XX"
select SYS_HAS_CPU_MIPS32_R2
+ select CPU_MIPSR2_IRQ_VI
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
@@ -27,6 +30,7 @@
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
select GPIOLIB
+ select LEDS_GPIO_REGISTER
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index c52daf9..4688b6a 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,5 +4,4 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y += board.o
-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
+obj-y += board.o buttons.o leds.o
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
new file mode 100644
index 0000000..5c94ace
--- /dev/null
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -0,0 +1,12 @@
+#ifndef LINUX_BCM47XX_PRIVATE_H_
+#define LINUX_BCM47XX_PRIVATE_H_
+
+#include <linux/kernel.h>
+
+/* buttons.c */
+int __init bcm47xx_buttons_register(void);
+
+/* leds.c */
+void __init bcm47xx_leds_register(void);
+
+#endif
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index f3f6bfe..6d612e2 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -36,26 +36,32 @@
struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
- { {0}, 0},
+ { {0}, NULL},
};
/* model_no */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
- { {0}, 0},
+ { {0}, NULL},
};
/* machine_name */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
{{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
- { {0}, 0},
+ { {0}, NULL},
};
/* hardware_version */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
+ {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
+ {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
+ {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
+ {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
+ {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RTN12D1"},
+ {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RTN12HP"},
{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
{{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
@@ -66,7 +72,7 @@
{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
- { {0}, 0},
+ { {0}, NULL},
};
/* productid */
@@ -75,19 +81,13 @@
{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
{{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
- {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
- {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
- {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
- {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
- {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
- {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
{{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
{{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
- { {0}, 0},
+ { {0}, NULL},
};
/* ModelId */
@@ -97,7 +97,7 @@
{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
- { {0}, 0},
+ { {0}, NULL},
};
/* melco_id or buf1falo_id */
@@ -112,7 +112,7 @@
{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
- { {0}, 0},
+ { {0}, NULL},
};
/* boot_hw_model, boot_hw_ver */
@@ -143,7 +143,7 @@
{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
- { {0}, 0},
+ { {0}, NULL},
};
/* board_id */
@@ -165,7 +165,7 @@
{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
- { {0}, 0},
+ { {0}, NULL},
};
/* boardtype, boardnum, boardrev */
@@ -174,7 +174,9 @@
{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
- { {0}, 0},
+ {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
+ { {0}, NULL},
};
static const
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
new file mode 100644
index 0000000..872c62e
--- /dev/null
+++ b/arch/mips/bcm47xx/buttons.c
@@ -0,0 +1,531 @@
+#include "bcm47xx_private.h"
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/interrupt.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+/**************************************************
+ * Database
+ **************************************************/
+
+#define BCM47XX_GPIO_KEY(_gpio, _code) \
+ { \
+ .code = _code, \
+ .gpio = _gpio, \
+ .active_low = 1, \
+ }
+
+/* Asus */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn12[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(1, KEY_RESTART),
+ BCM47XX_GPIO_KEY(4, BTN_0), /* Router mode */
+ BCM47XX_GPIO_KEY(5, BTN_1), /* Repeater mode */
+ BCM47XX_GPIO_KEY(6, BTN_2), /* AP mode */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn16[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn66u[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(9, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl300g[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl320ge[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl330ge[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gd[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gpv1[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gpv2[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500w[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl520gc[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl520gu[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl700ge[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_POWER), /* Hard disk power switch */
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), /* EZSetup */
+ BCM47XX_GPIO_KEY(6, KEY_COPY), /* Copy data from USB to internal disk */
+ BCM47XX_GPIO_KEY(7, KEY_RESTART), /* Hard reset */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wlhdd[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Huawei */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_huawei_e970[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Belkin */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_belkin_f7d4301[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+/* Buffalo */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr2_a54g54[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_g300n[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_rs_g54[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_rs_g54hp[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+/* Dell */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dell_tm2300[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+/* D-Link */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dlink_dir130[] __initconst = {
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dlink_dir330[] __initconst = {
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
+};
+
+/* Linksys */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e1000v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e1000v21[] __initconst = {
+ BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(10, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e2000v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e3000v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e3200v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e4200v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt150nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt150nv11[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt160nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt160nv3[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt300nv11[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_UNKNOWN),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt610nv2[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Motorola */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_we800g[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_wr850gp[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_wr850gv2v3[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
+};
+
+/* Netgear */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RFKILL),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3700v3[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RFKILL),
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr4500v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(5, KEY_RFKILL),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* SimpleTech */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_simpletech_simpleshare[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+static struct gpio_keys_platform_data bcm47xx_button_pdata;
+
+static struct platform_device bcm47xx_buttons_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bcm47xx_button_pdata,
+ }
+};
+
+/* Copy data from __initconst */
+static int __init bcm47xx_buttons_copy(const struct gpio_keys_button *buttons,
+ size_t nbuttons)
+{
+ size_t size = nbuttons * sizeof(*buttons);
+
+ bcm47xx_button_pdata.buttons = kmalloc(size, GFP_KERNEL);
+ if (!bcm47xx_button_pdata.buttons)
+ return -ENOMEM;
+ memcpy(bcm47xx_button_pdata.buttons, buttons, size);
+ bcm47xx_button_pdata.nbuttons = nbuttons;
+
+ return 0;
+}
+
+#define bcm47xx_copy_bdata(dev_buttons) \
+ bcm47xx_buttons_copy(dev_buttons, ARRAY_SIZE(dev_buttons));
+
+int __init bcm47xx_buttons_register(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+ int err;
+
+ switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN12:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN16:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn16);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN66U:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn66u);
+ break;
+ case BCM47XX_BOARD_ASUS_WL300G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl300g);
+ break;
+ case BCM47XX_BOARD_ASUS_WL320GE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl320ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL330GE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GD:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv1);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv2);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500W:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500w);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GC:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gc);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GU:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gu);
+ break;
+ case BCM47XX_BOARD_ASUS_WL700GE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl700ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WLHDD:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
+ break;
+
+ case BCM47XX_BOARD_BELKIN_F7D4301:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
+ break;
+
+ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr2_a54g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G125:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g125);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G54S:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g54s);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_hp_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_G300N:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_g300n);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54hp);
+ break;
+
+ case BCM47XX_BOARD_DELL_TM2300:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dell_tm2300);
+ break;
+
+ case BCM47XX_BOARD_DLINK_DIR130:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir130);
+ break;
+ case BCM47XX_BOARD_DLINK_DIR330:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir330);
+ break;
+
+ case BCM47XX_BOARD_HUAWEI_E970:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_huawei_e970);
+ break;
+
+ case BCM47XX_BOARD_LINKSYS_E1000V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E1000V21:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v21);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E2000V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3000V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3200V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E4200V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e4200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV11:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv3);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt300nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
+ break;
+
+ case BCM47XX_BOARD_MOTOROLA_WE800G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GP:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gp);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
+ break;
+
+ case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNR834BV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
+ break;
+
+ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_simpletech_simpleshare);
+ break;
+
+ default:
+ pr_debug("No buttons configuration found for this device\n");
+ return -ENOTSUPP;
+ }
+
+ if (err)
+ return -ENOMEM;
+
+ err = platform_device_register(&bcm47xx_buttons_gpio_keys);
+ if (err) {
+ pr_err("Failed to register platform device: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
diff --git a/arch/mips/bcm47xx/irq.c b/arch/mips/bcm47xx/irq.c
index 8cf3833..e0585b7 100644
--- a/arch/mips/bcm47xx/irq.c
+++ b/arch/mips/bcm47xx/irq.c
@@ -25,10 +25,11 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/setup.h>
#include <asm/irq_cpu.h>
#include <bcm47xx.h>
-void plat_irq_dispatch(void)
+asmlinkage void plat_irq_dispatch(void)
{
u32 cause;
@@ -50,6 +51,18 @@
do_IRQ(6);
}
+#define DEFINE_HWx_IRQDISPATCH(x) \
+ static void bcm47xx_hw ## x ## _irqdispatch(void) \
+ { \
+ do_IRQ(x); \
+ }
+DEFINE_HWx_IRQDISPATCH(2)
+DEFINE_HWx_IRQDISPATCH(3)
+DEFINE_HWx_IRQDISPATCH(4)
+DEFINE_HWx_IRQDISPATCH(5)
+DEFINE_HWx_IRQDISPATCH(6)
+DEFINE_HWx_IRQDISPATCH(7)
+
void __init arch_init_irq(void)
{
#ifdef CONFIG_BCM47XX_BCMA
@@ -64,4 +77,14 @@
}
#endif
mips_cpu_irq_init();
+
+ if (cpu_has_vint) {
+ pr_info("Setting up vectored interrupts\n");
+ set_vi_handler(2, bcm47xx_hw2_irqdispatch);
+ set_vi_handler(3, bcm47xx_hw3_irqdispatch);
+ set_vi_handler(4, bcm47xx_hw4_irqdispatch);
+ set_vi_handler(5, bcm47xx_hw5_irqdispatch);
+ set_vi_handler(6, bcm47xx_hw6_irqdispatch);
+ set_vi_handler(7, bcm47xx_hw7_irqdispatch);
+ }
}
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
new file mode 100644
index 0000000..647d155
--- /dev/null
+++ b/arch/mips/bcm47xx/leds.c
@@ -0,0 +1,542 @@
+#include "bcm47xx_private.h"
+
+#include <linux/leds.h>
+#include <bcm47xx_board.h>
+
+/**************************************************
+ * Database
+ **************************************************/
+
+#define BCM47XX_GPIO_LED(_gpio, _color, _function, _active_low, \
+ _default_state) \
+ { \
+ .name = "bcm47xx:" _color ":" _function, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .default_state = _default_state, \
+ }
+
+#define BCM47XX_GPIO_LED_TRIGGER(_gpio, _color, _function, _active_low, \
+ _default_trigger) \
+ { \
+ .name = "bcm47xx:" _color ":" _function, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .default_state = LEDS_GPIO_DEFSTATE_OFF, \
+ .default_trigger = _default_trigger, \
+ }
+
+/* Asus */
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn12[] __initconst = {
+ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn16[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn66u[] __initconst = {
+ BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl300g[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl320ge[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(11, "unk", "link", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl330ge[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gd[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gpv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gpv2[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500w[] __initconst = {
+ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl520gc[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl520gu[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl700ge[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), /* Labeled "READY" (there is no "power" LED). Originally ON, flashing on USB activity. */
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wlhdd[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Belkin */
+
+static const struct gpio_led
+bcm47xx_leds_belkin_f7d4301[] __initconst = {
+ BCM47XX_GPIO_LED(10, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(11, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(12, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(13, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(14, "unk", "usb0", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(15, "unk", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Buffalo */
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr2_a54g54[] __initconst = {
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_g125[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_g54s[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_hp_g54[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_g300n[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_rs_g54[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_rs_g54hp[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Dell */
+
+static const struct gpio_led
+bcm47xx_leds_dell_tm2300[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+/* D-Link */
+
+static const struct gpio_led
+bcm47xx_leds_dlink_dir130[] __initconst = {
+ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
+ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_dlink_dir330[] __initconst = {
+ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
+ BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Huawei */
+
+static const struct gpio_led
+bcm47xx_leds_huawei_e970[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Linksys */
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e1000v1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e1000v21[] __initconst = {
+ BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e2000v1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e3000v1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e3200v1[] __initconst = {
+ BCM47XX_GPIO_LED(3, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e4200v1[] __initconst = {
+ BCM47XX_GPIO_LED(5, "white", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt150nv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt150nv11[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt160nv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt160nv3[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt300nv11[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt610nv2[] __initconst = {
+ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Motorola */
+
+static const struct gpio_led
+bcm47xx_leds_motorola_we800g[] __initconst = {
+ BCM47XX_GPIO_LED(1, "amber", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), /* There are only 3 LEDs: Power, Wireless and Device (ethernet) */
+ BCM47XX_GPIO_LED(4, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_motorola_wr850gp[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(6, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_motorola_wr850gv2v3[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Netgear */
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr3400v1[] __initconst = {
+ BCM47XX_GPIO_LED(2, "green", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr4500v1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(8, "green", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(9, "green", "2ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(11, "blue", "5ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(14, "green", "usb2", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
+ BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* SimpleTech */
+
+static const struct gpio_led
+bcm47xx_leds_simpletech_simpleshare[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* "Ready" LED */
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+static struct gpio_led_platform_data bcm47xx_leds_pdata;
+
+#define bcm47xx_set_pdata(dev_leds) do { \
+ bcm47xx_leds_pdata.leds = dev_leds; \
+ bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \
+} while (0)
+
+void __init bcm47xx_leds_register(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN12:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN16:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN66U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn66u);
+ break;
+ case BCM47XX_BOARD_ASUS_WL300G:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl300g);
+ break;
+ case BCM47XX_BOARD_ASUS_WL320GE:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl320ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL330GE:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GD:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV1:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv1);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV2:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv2);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500W:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500w);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GC:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gc);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GU:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gu);
+ break;
+ case BCM47XX_BOARD_ASUS_WL700GE:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl700ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WLHDD:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
+ break;
+
+ case BCM47XX_BOARD_BELKIN_F7D4301:
+ bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
+ break;
+
+ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr2_a54g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G125:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g125);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G54S:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g54s);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_hp_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_G300N:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_g300n);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54hp);
+ break;
+
+ case BCM47XX_BOARD_DELL_TM2300:
+ bcm47xx_set_pdata(bcm47xx_leds_dell_tm2300);
+ break;
+
+ case BCM47XX_BOARD_DLINK_DIR130:
+ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir130);
+ break;
+ case BCM47XX_BOARD_DLINK_DIR330:
+ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
+ break;
+
+ case BCM47XX_BOARD_HUAWEI_E970:
+ bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
+ break;
+
+ case BCM47XX_BOARD_LINKSYS_E1000V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E1000V21:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v21);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E2000V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e2000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3000V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3200V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E4200V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e4200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV11:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV3:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv3);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt300nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV2:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
+ break;
+
+ case BCM47XX_BOARD_MOTOROLA_WE800G:
+ bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GP:
+ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gp);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
+ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gv2v3);
+ break;
+
+ case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNR834BV2:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
+ break;
+
+ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
+ bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
+ break;
+
+ default:
+ pr_debug("No LEDs configuration found for this device\n");
+ return;
+ }
+
+ gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+}
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index b4c585b..6decb27 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -11,7 +11,6 @@
* option) any later version.
*/
-#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/ssb/ssb.h>
@@ -22,11 +21,11 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
static char nvram_buf[NVRAM_SPACE];
+static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
static u32 find_nvram_size(u32 end)
{
struct nvram_header *header;
- u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
int i;
for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 5cba318..0af808d 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -28,126 +28,27 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_regs.h>
#include <linux/smp.h>
#include <asm/bootinfo.h>
-#include <asm/fw/cfe/cfe_api.h>
-#include <asm/fw/cfe/cfe_error.h>
#include <bcm47xx.h>
#include <bcm47xx_board.h>
-static int cfe_cons_handle;
-static u16 get_chip_id(void)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return bcm47xx_bus.ssb.chip_id;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcm47xx_bus.bcma.bus.chipinfo.id;
-#endif
- }
- return 0;
-}
+static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
const char *get_system_type(void)
{
- static char buf[50];
- u16 chip_id = get_chip_id();
-
- snprintf(buf, sizeof(buf),
- (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
- "Broadcom BCM%04X (%s)",
- chip_id, bcm47xx_board_get_name());
-
- return buf;
+ return bcm47xx_system_type;
}
-void prom_putchar(char c)
+__init void bcm47xx_set_system_type(u16 chip_id)
{
- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
- ;
-}
-
-static __init void prom_init_cfe(void)
-{
- uint32_t cfe_ept;
- uint32_t cfe_handle;
- uint32_t cfe_eptseal;
- int argc = fw_arg0;
- char **envp = (char **) fw_arg2;
- int *prom_vec = (int *) fw_arg3;
-
- /*
- * Check if a loader was used; if NOT, the 4 arguments are
- * what CFE gives us (handle, 0, EPT and EPTSEAL)
- */
- if (argc < 0) {
- cfe_handle = (uint32_t)argc;
- cfe_ept = (uint32_t)envp;
- cfe_eptseal = (uint32_t)prom_vec;
- } else {
- if ((int)prom_vec < 0) {
- /*
- * Old loader; all it gives us is the handle,
- * so use the "known" entrypoint and assume
- * the seal.
- */
- cfe_handle = (uint32_t)prom_vec;
- cfe_ept = 0xBFC00500;
- cfe_eptseal = CFE_EPTSEAL;
- } else {
- /*
- * Newer loaders bundle the handle/ept/eptseal
- * Note: prom_vec is in the loader's useg
- * which is still alive in the TLB.
- */
- cfe_handle = prom_vec[0];
- cfe_ept = prom_vec[2];
- cfe_eptseal = prom_vec[3];
- }
- }
-
- if (cfe_eptseal != CFE_EPTSEAL) {
- /* too early for panic to do any good */
- printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
- while (1) ;
- }
-
- cfe_init(cfe_handle, cfe_ept);
-}
-
-static __init void prom_init_console(void)
-{
- /* Initialize CFE console */
- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-}
-
-static __init void prom_init_cmdline(void)
-{
- static char buf[COMMAND_LINE_SIZE] __initdata;
-
- /* Get the kernel command line from CFE */
- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
- buf[COMMAND_LINE_SIZE - 1] = 0;
- strcpy(arcs_cmdline, buf);
- }
-
- /* Force a console handover by adding a console= argument if needed,
- * as CFE is not available anymore later in the boot process. */
- if ((strstr(arcs_cmdline, "console=")) == NULL) {
- /* Try to read the default serial port used by CFE */
- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
- || (strncmp("uart", buf, 4)))
- /* Default to uart0 */
- strcpy(buf, "uart0");
-
- /* Compute the new command line */
- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
- arcs_cmdline, buf[4]);
- }
+ snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
+ (chip_id > 0x9999) ? "Broadcom BCM%d" :
+ "Broadcom BCM%04X",
+ chip_id);
}
static __init void prom_init_mem(void)
@@ -195,12 +96,16 @@
add_memory_region(0, mem, BOOT_MEM_RAM);
}
+/*
+ * This is the first serial on the chip common core, it is at this position
+ * for sb (ssb) and ai (bcma) bus.
+ */
+#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
+
void __init prom_init(void)
{
- prom_init_cfe();
- prom_init_console();
- prom_init_cmdline();
prom_init_mem();
+ setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index b8ef965..2f5bbd6 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -31,7 +31,8 @@
memset(&uart8250_data, 0, sizeof(uart8250_data));
- for (i = 0; i < mcore->nr_serial_ports; i++) {
+ for (i = 0; i < mcore->nr_serial_ports &&
+ i < ARRAY_SIZE(uart8250_data) - 1; i++) {
struct plat_serial8250_port *p = &(uart8250_data[i]);
struct ssb_serial_port *ssb_port = &(mcore->serial_ports[i]);
@@ -55,7 +56,8 @@
memset(&uart8250_data, 0, sizeof(uart8250_data));
- for (i = 0; i < cc->nr_serial_ports; i++) {
+ for (i = 0; i < cc->nr_serial_ports &&
+ i < ARRAY_SIZE(uart8250_data) - 1; i++) {
struct plat_serial8250_port *p = &(uart8250_data[i]);
struct bcma_serial_port *bcma_port;
bcma_port = &(cc->serial_ports[i]);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 9057728..025be21 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -26,6 +26,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "bcm47xx_private.h"
+
#include <linux/export.h>
#include <linux/types.h>
#include <linux/ethtool.h>
@@ -35,6 +37,8 @@
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
#include <asm/bootinfo.h>
+#include <asm/idle.h>
+#include <asm/prom.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
@@ -213,12 +217,14 @@
#ifdef CONFIG_BCM47XX_BCMA
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
+ bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#endif
} else {
printk(KERN_INFO "bcm47xx: using ssb bus\n");
#ifdef CONFIG_BCM47XX_SSB
bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
bcm47xx_register_ssb();
+ bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
#endif
}
@@ -226,8 +232,34 @@
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
bcm47xx_board_detect();
+ mips_set_machine_name(bcm47xx_board_get_name());
}
+static int __init bcm47xx_cpu_fixes(void)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ /* Nothing to do */
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* The BCM4706 has a problem with the CPU wait instruction.
+ * When r4k_wait or r4k_wait_irqoff is used will just hang and
+ * not return from a msleep(). Removing the cpu_wait
+ * functionality is a workaround for this problem. The BCM4716
+ * does not have this problem.
+ */
+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+ cpu_wait = NULL;
+ break;
+#endif
+ }
+ return 0;
+}
+arch_initcall(bcm47xx_cpu_fixes);
+
static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
.link = 1,
.speed = SPEED_100,
@@ -248,6 +280,9 @@
break;
#endif
}
+ bcm47xx_buttons_register();
+ bcm47xx_leds_register();
+
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
}
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index ad03c93..a8b5408 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -135,7 +135,7 @@
}
static void nvram_read_macaddr(const char *prefix, const char *name,
- u8 (*val)[6], bool fallback)
+ u8 val[6], bool fallback)
{
char buf[100];
int err;
@@ -144,11 +144,11 @@
if (err < 0)
return;
- bcm47xx_nvram_parse_macaddr(buf, *val);
+ bcm47xx_nvram_parse_macaddr(buf, val);
}
static void nvram_read_alpha2(const char *prefix, const char *name,
- char (*val)[2], bool fallback)
+ char val[2], bool fallback)
{
char buf[10];
int err;
@@ -162,7 +162,7 @@
pr_warn("alpha2 is too long %s\n", buf);
return;
}
- memcpy(val, buf, sizeof(val));
+ memcpy(val, buf, 2);
}
static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
@@ -180,7 +180,7 @@
fallback);
nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0,
fallback);
- nvram_read_alpha2(prefix, "ccode", &sprom->alpha2, fallback);
+ nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
}
static void bcm47xx_fill_sprom_r12389(struct ssb_sprom *sprom,
@@ -633,20 +633,20 @@
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
- nvram_read_macaddr(prefix, "et0macaddr", &sprom->et0mac, fallback);
+ nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
fallback);
nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
fallback);
- nvram_read_macaddr(prefix, "et1macaddr", &sprom->et1mac, fallback);
+ nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
fallback);
nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
fallback);
- nvram_read_macaddr(prefix, "macaddr", &sprom->il0mac, fallback);
- nvram_read_macaddr(prefix, "il0macaddr", &sprom->il0mac, fallback);
+ nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
+ nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
}
static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
deleted file mode 100644
index c63a4c2..0000000
--- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/gpio.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-/* GPIO definitions for the WGT634U */
-#define WGT634U_GPIO_LED 3
-#define WGT634U_GPIO_RESET 2
-#define WGT634U_GPIO_TP1 7
-#define WGT634U_GPIO_TP2 6
-#define WGT634U_GPIO_TP3 5
-#define WGT634U_GPIO_TP4 4
-#define WGT634U_GPIO_TP5 1
-
-static struct gpio_led wgt634u_leds[] = {
- {
- .name = "power",
- .gpio = WGT634U_GPIO_LED,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static struct gpio_led_platform_data wgt634u_led_data = {
- .num_leds = ARRAY_SIZE(wgt634u_leds),
- .leds = wgt634u_leds,
-};
-
-static struct platform_device wgt634u_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wgt634u_led_data,
- }
-};
-
-
-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
- firmware. */
-static struct mtd_partition wgt634u_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x60000, /* 384k */
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "config",
- .offset = 0x60000,
- .size = 0x20000 /* 128k */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0x140000 /* 1280k */
- },
- {
- .name = "jffs",
- .offset = 0x1c0000,
- .size = 0x620000 /* 6272k */
- },
- {
- .name = "nvram",
- .offset = 0x7e0000,
- .size = 0x20000 /* 128k */
- },
-};
-
-static struct physmap_flash_data wgt634u_flash_data = {
- .parts = wgt634u_partitions,
- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
-};
-
-static struct resource wgt634u_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device wgt634u_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = { .platform_data = &wgt634u_flash_data, },
- .resource = &wgt634u_flash_resource,
- .num_resources = 1,
-};
-
-/* Platform devices */
-static struct platform_device *wgt634u_devices[] __initdata = {
- &wgt634u_flash,
- &wgt634u_gpio_leds,
-};
-
-static irqreturn_t gpio_interrupt(int irq, void *ignored)
-{
- int state;
-
- /* Interrupts are shared, check if the current one is
- a GPIO interrupt. */
- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO))
- return IRQ_NONE;
-
- state = gpio_get_value(WGT634U_GPIO_RESET);
-
- /* Interrupt are level triggered, revert the interrupt polarity
- to clear the interrupt. */
- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
- state ? 1 << WGT634U_GPIO_RESET : 0);
-
- if (!state) {
- printk(KERN_INFO "Reset button pressed");
- ctrl_alt_del();
- }
-
- return IRQ_HANDLED;
-}
-
-static int __init wgt634u_init(void)
-{
- /* There is no easy way to detect that we are running on a WGT634U
- * machine. Use the MAC address as an heuristic. Netgear Inc. has
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
- u8 *et0mac;
-
- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
- return -ENODEV;
-
- et0mac = bcm47xx_bus.ssb.sprom.et0mac;
-
- if (et0mac[0] == 0x00 &&
- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
- gpio_direction_input(WGT634U_GPIO_RESET);
- ssb_gpio_intmask(&bcm47xx_bus.ssb,
- 1 << WGT634U_GPIO_RESET,
- 1 << WGT634U_GPIO_RESET);
- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO,
- SSB_CHIPCO_IRQ_GPIO);
- }
-
- wgt634u_flash_data.width = mcore->pflash.buswidth;
- wgt634u_flash_resource.start = mcore->pflash.window;
- wgt634u_flash_resource.end = mcore->pflash.window
- + mcore->pflash.window_size
- - 1;
- return platform_add_devices(wgt634u_devices,
- ARRAY_SIZE(wgt634u_devices));
- } else
- return -ENODEV;
-}
-
-module_init(wgt634u_init);
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index b78306c..a057fdf1 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -3,33 +3,41 @@
config BCM63XX_CPU_3368
bool "support 3368 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
config BCM63XX_CPU_6328
bool "support 6328 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
config BCM63XX_CPU_6338
bool "support 6338 CPU"
+ select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI
config BCM63XX_CPU_6345
bool "support 6345 CPU"
+ select SYS_HAS_CPU_BMIPS32_3300
config BCM63XX_CPU_6348
bool "support 6348 CPU"
+ select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI
config BCM63XX_CPU_6358
bool "support 6358 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
config BCM63XX_CPU_6362
bool "support 6362 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
config BCM63XX_CPU_6368
bool "support 6368 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
endmenu
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index ac28073..9019f54 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
- dev-usb-usbd.o
+ dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+ dev-wdt.o dev-usb-usbd.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 5b974eb..33727e7 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -23,6 +23,7 @@
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_dev_flash.h>
+#include <bcm63xx_dev_hsspi.h>
#include <bcm63xx_dev_pcmcia.h>
#include <bcm63xx_dev_spi.h>
#include <bcm63xx_dev_usb_usbd.h>
@@ -915,6 +916,8 @@
bcm63xx_spi_register();
+ bcm63xx_hsspi_register();
+
bcm63xx_flash_register();
bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 43da4ae..6375652 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -226,6 +226,28 @@
};
/*
+ * HSSPI clock
+ */
+static void hsspi_set(struct clk *clk, int enable)
+{
+ u32 mask;
+
+ if (BCMCPU_IS_6328())
+ mask = CKCTL_6328_HSSPI_EN;
+ else if (BCMCPU_IS_6362())
+ mask = CKCTL_6362_HSSPI_EN;
+ else
+ return;
+
+ bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_hsspi = {
+ .set = hsspi_set,
+};
+
+
+/*
* XTM clock
*/
static void xtm_set(struct clk *clk, int enable)
@@ -346,6 +368,8 @@
return &clk_usbd;
if (!strcmp(id, "spi"))
return &clk_spi;
+ if (!strcmp(id, "hsspi"))
+ return &clk_hsspi;
if (!strcmp(id, "xtm"))
return &clk_xtm;
if (!strcmp(id, "periph"))
@@ -366,3 +390,21 @@
}
EXPORT_SYMBOL(clk_put);
+
+#define HSSPI_PLL_HZ_6328 133333333
+#define HSSPI_PLL_HZ_6362 400000000
+
+static int __init bcm63xx_clk_init(void)
+{
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ clk_hsspi.rate = HSSPI_PLL_HZ_6328;
+ break;
+ case BCM6362_CPU_ID:
+ clk_hsspi.rate = HSSPI_PLL_HZ_6362;
+ break;
+ }
+
+ return 0;
+}
+arch_initcall(bcm63xx_clk_init);
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index b713cd6..1b1b8a8 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -123,7 +123,9 @@
static unsigned int detect_cpu_clock(void)
{
- switch (bcm63xx_get_cpu_id()) {
+ u16 cpu_id = bcm63xx_get_cpu_id();
+
+ switch (cpu_id) {
case BCM3368_CPU_ID:
return 300000000;
@@ -249,7 +251,7 @@
}
default:
- BUG();
+ panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
}
}
diff --git a/arch/mips/bcm63xx/dev-hsspi.c b/arch/mips/bcm63xx/dev-hsspi.c
new file mode 100644
index 0000000..696abc4
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-hsspi.c
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_hsspi.h>
+#include <bcm63xx_regs.h>
+
+static struct resource spi_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bcm63xx_hsspi_device = {
+ .name = "bcm63xx-hsspi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(spi_resources),
+ .resource = spi_resources,
+};
+
+int __init bcm63xx_hsspi_register(void)
+{
+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
+ return -ENODEV;
+
+ spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+ spi_resources[0].end = spi_resources[0].start;
+ spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+
+ return platform_device_register(&bcm63xx_hsspi_device);
+}
diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c
index aa8f7f9..6092226 100644
--- a/arch/mips/bcm63xx/early_printk.c
+++ b/arch/mips/bcm63xx/early_printk.c
@@ -6,9 +6,8 @@
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*/
-#include <linux/init.h>
#include <bcm63xx_io.h>
-#include <bcm63xx_regs.h>
+#include <linux/serial_bcm63xx.h>
static void wait_xfered(void)
{
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index 8ac4e09..e1f27d6 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -59,14 +59,12 @@
/* do low level board init */
board_prom_init();
- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
- /* set up SMP */
- register_smp_ops(&bmips_smp_ops);
-
+ /* set up SMP */
+ if (!register_bmips_smp_ops()) {
/*
- * BCM6328 might not have its second CPU enabled, while BCM6358
- * needs special handling for its shared TLB, so disable SMP
- * for now.
+ * BCM6328 might not have its second CPU enabled, while BCM3368
+ * and BCM6358 need special handling for their shared TLB, so
+ * disable SMP for now.
*/
if (BCMCPU_IS_6328()) {
reg = bcm_readl(BCM_6328_OTP_BASE +
@@ -74,7 +72,7 @@
if (reg & OTP_6328_REG3_TP1_DISABLED)
bmips_smp_enabled = 0;
- } else if (BCMCPU_IS_6358()) {
+ } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
bmips_smp_enabled = 0;
}
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index ca0c343..61af6b6 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -27,10 +27,10 @@
-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
-targets := head.o decompress.o dbg.o uart-16550.o uart-alchemy.o
+targets := head.o decompress.o string.o dbg.o uart-16550.o uart-alchemy.o
# decompressor objects (linked with vmlinuz)
-vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/dbg.o
ifdef CONFIG_DEBUG_ZBOOT
vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
index 134a616..06c6a5b 100644
--- a/arch/mips/boot/compressed/dbg.c
+++ b/arch/mips/boot/compressed/dbg.c
@@ -6,7 +6,6 @@
* need to implement your own putc().
*/
#include <linux/compiler.h>
-#include <linux/init.h>
#include <linux/types.h>
void __weak putc(char c)
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index a8c6fd6..c00c4dd 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -43,33 +43,11 @@
/* activate the code for pre-boot environment */
#define STATIC static
-#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) || \
- defined(CONFIG_KERNEL_LZ4)
-void *memcpy(void *dest, const void *src, size_t n)
-{
- int i;
- const char *s = src;
- char *d = dest;
-
- for (i = 0; i < n; i++)
- d[i] = s[i];
- return dest;
-}
-#endif
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/decompress_inflate.c"
#endif
#ifdef CONFIG_KERNEL_BZIP2
-void *memset(void *s, int c, size_t n)
-{
- int i;
- char *ss = s;
-
- for (i = 0; i < n; i++)
- ss[i] = c;
- return s;
-}
#include "../../../../lib/decompress_bunzip2.c"
#endif
diff --git a/arch/mips/boot/compressed/string.c b/arch/mips/boot/compressed/string.c
new file mode 100644
index 0000000..9de9885
--- /dev/null
+++ b/arch/mips/boot/compressed/string.c
@@ -0,0 +1,28 @@
+/*
+ * arch/mips/boot/compressed/string.c
+ *
+ * Very small subset of simple string routines
+ */
+
+#include <linux/types.h>
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i;
+ const char *s = src;
+ char *d = dest;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index c01d343..237494b 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -4,7 +4,6 @@
#include <linux/types.h>
#include <linux/serial_reg.h>
-#include <linux/init.h>
#include <asm/addrspace.h>
@@ -19,8 +18,8 @@
#endif
#ifdef CONFIG_MACH_JZ4740
-#define UART0_BASE 0xB0030000
-#define PORT(offset) (UART0_BASE + (4 * offset))
+#include <asm/mach-jz4740/base.h>
+#define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
#endif
#ifdef CONFIG_CPU_XLR
diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
index 132bccc..8241fc6 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
@@ -47,6 +47,7 @@
* state. It points to a bootmem named block.
*/
__cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr;
+EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr);
/**
* Initialize the Global queue state pointer.
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index 0a1283c..b764df6 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -722,3 +722,30 @@
}
return 0;
}
+
+/**
+ * Get the clock type used for the USB block based on board type.
+ * Used by the USB code for auto configuration of clock type.
+ *
+ * Return USB clock type enumeration
+ */
+enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void)
+{
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ case CVMX_BOARD_TYPE_LANAI2_A:
+ case CVMX_BOARD_TYPE_LANAI2_U:
+ case CVMX_BOARD_TYPE_LANAI2_G:
+ case CVMX_BOARD_TYPE_NIC10E_66:
+ case CVMX_BOARD_TYPE_UBNT_E100:
+ return USB_CLOCK_TYPE_CRYSTAL_12;
+ case CVMX_BOARD_TYPE_NIC10E:
+ return USB_CLOCK_TYPE_REF_12;
+ default:
+ break;
+ }
+ /* Most boards except NIC10e use a 12MHz crystal */
+ if (OCTEON_IS_MODEL(OCTEON_FAM_2))
+ return USB_CLOCK_TYPE_CRYSTAL_12;
+ return USB_CLOCK_TYPE_REF_48;
+}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
index 65d2bc9..453d7f6 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
@@ -251,6 +251,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_setup_red);
/**
* Setup the common GMX settings that determine the number of
@@ -384,6 +385,7 @@
}
return -1;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_get_ipd_port);
/**
* Returns the interface number for an IPD/PKO port number.
@@ -408,6 +410,7 @@
return -1;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_num);
/**
* Returns the interface index number for an IPD/PKO port
@@ -431,3 +434,4 @@
return -1;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_index_num);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index d63d20d..8553ad5 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -67,7 +67,7 @@
void (*cvmx_override_ipd_port_setup) (int ipd_port);
/* Port count per interface */
-static int interface_port_count[4] = { 0, 0, 0, 0 };
+static int interface_port_count[5];
/* Port last configured link info index by IPD/PKO port */
static cvmx_helper_link_info_t
@@ -88,6 +88,7 @@
else
return 3;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_get_number_of_interfaces);
/**
* Return the number of ports on an interface. Depending on the
@@ -102,6 +103,7 @@
{
return interface_port_count[interface];
}
+EXPORT_SYMBOL_GPL(cvmx_helper_ports_on_interface);
/**
* Get the operating mode of an interface. Depending on the Octeon
@@ -179,6 +181,7 @@
return CVMX_HELPER_INTERFACE_MODE_RGMII;
}
}
+EXPORT_SYMBOL_GPL(cvmx_helper_interface_get_mode);
/**
* Configure the IPD/PIP tagging and QoS options for a specific
@@ -825,6 +828,7 @@
__cvmx_helper_errata_fix_ipd_ptr_alignment();
return 0;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_ipd_and_packet_input_enable);
/**
* Initialize the PIP, IPD, and PKO hardware to support
@@ -903,6 +907,7 @@
#endif
return result;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_initialize_packet_io_global);
/**
* Does core local initialization for packet io
@@ -947,6 +952,7 @@
*/
return port_link_info[ipd_port];
}
+EXPORT_SYMBOL_GPL(cvmx_helper_link_autoconf);
/**
* Return the link state of an IPD/PKO port as returned by
@@ -1005,6 +1011,7 @@
}
return result;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_link_get);
/**
* Configure an IPD/PKO port for the specified link state. This
@@ -1060,6 +1067,7 @@
port_link_info[ipd_port].u64 = link_info.u64;
return result;
}
+EXPORT_SYMBOL_GPL(cvmx_helper_link_set);
/**
* Configure a port for internal and/or external loopback. Internal loopback
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index f2c8775..008b881 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -140,7 +140,7 @@
pko_reg_flags.s.ena_pko = 0;
cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64);
}
-
+EXPORT_SYMBOL_GPL(cvmx_pko_disable);
/**
* Reset the packet output.
@@ -182,6 +182,7 @@
}
__cvmx_pko_reset();
}
+EXPORT_SYMBOL_GPL(cvmx_pko_shutdown);
/**
* Configure a output port and the associated queues for use.
diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c
index ef5198d..459e3b1 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c
@@ -177,6 +177,7 @@
return res;
}
+EXPORT_SYMBOL_GPL(cvmx_spi_restart_interface);
/**
* Callback to perform SPI4 reset
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 1830874..6df0f4d 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -171,6 +171,7 @@
static struct of_device_id __initdata octeon_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "cavium,octeon-6335-uctl", },
+ { .compatible = "cavium,octeon-5750-usbn", },
{ .compatible = "cavium,octeon-3860-bootbus", },
{ .compatible = "cavium,mdio-mux", },
{ .compatible = "gpio-leds", },
@@ -336,14 +337,14 @@
int p;
int count = 0;
- if (cvmx_helper_interface_enumerate(idx) == 0)
- count = cvmx_helper_ports_on_interface(idx);
-
snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
if (iface < 0)
return;
+ if (cvmx_helper_interface_enumerate(idx) == 0)
+ count = cvmx_helper_ports_on_interface(idx);
+
for (p = 0; p < 16; p++)
octeon_fdt_pip_port(iface, idx, p, count - 1, pmac);
}
@@ -682,6 +683,37 @@
}
}
+ /* DWC2 USB */
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ "usbn", NULL);
+ if (alias_prop) {
+ int usbn = fdt_path_offset(initial_boot_params, alias_prop);
+
+ if (usbn >= 0 && (current_cpu_type() == CPU_CAVIUM_OCTEON2 ||
+ !octeon_has_feature(OCTEON_FEATURE_USB))) {
+ pr_debug("Deleting usbn\n");
+ fdt_nop_node(initial_boot_params, usbn);
+ fdt_nop_property(initial_boot_params, aliases, "usbn");
+ } else {
+ __be32 new_f[1];
+ enum cvmx_helper_board_usb_clock_types c;
+ c = __cvmx_helper_board_usb_get_clock_type();
+ switch (c) {
+ case USB_CLOCK_TYPE_REF_48:
+ new_f[0] = cpu_to_be32(48000000);
+ fdt_setprop_inplace(initial_boot_params, usbn,
+ "refclk-frequency", new_f, sizeof(new_f));
+ /* Fall through ...*/
+ case USB_CLOCK_TYPE_REF_12:
+ /* Missing "refclk-type" defaults to external. */
+ fdt_nop_property(initial_boot_params, usbn, "refclk-type");
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
return 0;
}
diff --git a/arch/mips/cavium-octeon/octeon_3xxx.dts b/arch/mips/cavium-octeon/octeon_3xxx.dts
index 88cb42d..fa33115 100644
--- a/arch/mips/cavium-octeon/octeon_3xxx.dts
+++ b/arch/mips/cavium-octeon/octeon_3xxx.dts
@@ -550,6 +550,24 @@
big-endian-regs;
};
};
+
+ usbn: usbn@1180068000000 {
+ compatible = "cavium,octeon-5750-usbn";
+ reg = <0x11800 0x68000000 0x0 0x1000>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ usbc@16f0010000000 {
+ compatible = "cavium,octeon-5750-usbc";
+ reg = <0x16f00 0x10000000 0x0 0x80000>;
+ interrupts = <0 56>;
+ };
+ };
};
aliases {
@@ -566,6 +584,7 @@
flash0 = &flash0;
cf0 = &cf0;
uctl = &uctl;
+ usbn = &usbn;
led0 = &led0;
};
};
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 24a2167..67a078f 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -6,7 +6,6 @@
* Copyright (C) 2004-2008, 2009, 2010 Cavium Networks
*/
#include <linux/cpu.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index 80e012fa..320772c 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -86,7 +86,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 4ca8e5c..0db4eb3 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -1,623 +1,86 @@
CONFIG_BCM47XX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_KEXEC=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_TINY_RCU=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RELAY=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
CONFIG_PCI=y
-CONFIG_BINFMT_MISC=m
+# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
+CONFIG_IPV6_MROUTE=y
CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_IP_DCCP=m
-CONFIG_TIPC=m
-CONFIG_TIPC_ADVANCED=y
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q=y
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_MESH=y
-CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_HAMRADIO=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
+CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_ABSENT=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_ISCSI_TCP=m
+CONFIG_MTD_BCM47XXSFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_PHYLIB=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
CONFIG_B44=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_ATH_COMMON=m
-CONFIG_ATH5K=m
-CONFIG_B43=m
-CONFIG_B43LEGACY=m
-CONFIG_ZD1211RW=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_SIERRA_NET=m
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
+CONFIG_TIGON3=y
+CONFIG_BGMAC=y
+CONFIG_ATH_CARDS=y
+CONFIG_ATH5K=y
+CONFIG_B43=y
+CONFIG_B43LEGACY=y
+CONFIG_BRCMSMAC=y
+CONFIG_ISDN=y
CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_W1=m
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_HW_RANDOM=y
+CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_BCM47XX_WDT=y
+CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_DISPLAY_SUPPORT=m
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_HID=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
+CONFIG_USB_HCD_BCMA=y
+CONFIG_USB_HCD_SSB=y
CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_GFS2_FS=m
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_DLM_DEBUG=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
-CONFIG_CRC7=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_CRC32_SARWATE=y
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 9190051..3fec264 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -44,7 +44,6 @@
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 5419adb..23b6693 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -19,7 +19,6 @@
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_JEDECPROBE=y
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index fb64589..8f219da 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -165,7 +165,6 @@
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index db5705e..9bc08f2 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -22,7 +22,6 @@
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index d9f3db2..0179c7f 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -31,7 +31,6 @@
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig
index 8a66602..d759318 100644
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -4,7 +4,7 @@
CONFIG_MIPS_MT_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_MIPS_CMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=2
CONFIG_HZ_100=y
CONFIG_LOCALVERSION="cmp"
CONFIG_SYSVIPC=y
@@ -58,7 +58,6 @@
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index 636f82b..4c2c0c4 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -124,7 +124,6 @@
CONFIG_IP6_NF_RAW=m
CONFIG_FW_LOADER=m
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 9fa8f16..593946a 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -246,7 +246,6 @@
CONFIG_BT_HCIVHCI=m
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/pnx8335_stb225_defconfig b/arch/mips/configs/pnx8335_stb225_defconfig
index f292576..c887066 100644
--- a/arch/mips/configs/pnx8335_stb225_defconfig
+++ b/arch/mips/configs/pnx8335_stb225_defconfig
@@ -31,7 +31,6 @@
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig
new file mode 100644
index 0000000..2b96547
--- /dev/null
+++ b/arch/mips/configs/qi_lb60_defconfig
@@ -0,0 +1,188 @@
+CONFIG_MACH_JZ4740=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HZ_100=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_JZ4740=y
+CONFIG_MTD_UBI=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=2
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_JZ4740=y
+CONFIG_CHARGER_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_JZ4740_ADC=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_JZ4740=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_JZ4740_SOC=y
+CONFIG_SND_JZ4740_SOC_QI_LB60=y
+CONFIG_USB=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_JZ4740=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4740=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_READABLE_ASM=y
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_RUNTIME_DEBUG=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_SUN8x16=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index b85b121..5d9d708 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -114,7 +114,6 @@
CONFIG_HAMRADIO=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 9cba856..f8bf9b4 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -35,7 +35,6 @@
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=m
diff --git a/arch/mips/fw/arc/file.c b/arch/mips/fw/arc/file.c
index a8b0803..49fd3ff 100644
--- a/arch/mips/fw/arc/file.c
+++ b/arch/mips/fw/arc/file.c
@@ -8,7 +8,6 @@
* Copyright (C) 1994, 1995, 1996, 1999 Ralf Baechle
* Copyright (C) 1999 Silicon Graphics, Inc.
*/
-#include <linux/init.h>
#include <asm/fw/arc/types.h>
#include <asm/sgialib.h>
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
index c3dc1a6..3cc03c6 100644
--- a/arch/mips/include/asm/amon.h
+++ b/arch/mips/include/asm/amon.h
@@ -1,7 +1,12 @@
/*
- * Amon support
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ *
+ * Arbitrary Monitor Support (AMON)
*/
-
-int amon_cpu_avail(int);
-void amon_cpu_start(int, unsigned long, unsigned long,
- unsigned long, unsigned long);
+int amon_cpu_avail(int cpu);
+int amon_cpu_start(int cpu, unsigned long pc, unsigned long sp,
+ unsigned long gp, unsigned long a0);
diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h
index 2413afe..70e1f17 100644
--- a/arch/mips/include/asm/asmmacro-32.h
+++ b/arch/mips/include/asm/asmmacro-32.h
@@ -12,27 +12,6 @@
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
- .macro fpu_save_double thread status tmp1=t0
- cfc1 \tmp1, fcr31
- sdc1 $f0, THREAD_FPR0(\thread)
- sdc1 $f2, THREAD_FPR2(\thread)
- sdc1 $f4, THREAD_FPR4(\thread)
- sdc1 $f6, THREAD_FPR6(\thread)
- sdc1 $f8, THREAD_FPR8(\thread)
- sdc1 $f10, THREAD_FPR10(\thread)
- sdc1 $f12, THREAD_FPR12(\thread)
- sdc1 $f14, THREAD_FPR14(\thread)
- sdc1 $f16, THREAD_FPR16(\thread)
- sdc1 $f18, THREAD_FPR18(\thread)
- sdc1 $f20, THREAD_FPR20(\thread)
- sdc1 $f22, THREAD_FPR22(\thread)
- sdc1 $f24, THREAD_FPR24(\thread)
- sdc1 $f26, THREAD_FPR26(\thread)
- sdc1 $f28, THREAD_FPR28(\thread)
- sdc1 $f30, THREAD_FPR30(\thread)
- sw \tmp1, THREAD_FCR31(\thread)
- .endm
-
.macro fpu_save_single thread tmp=t0
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0(\thread)
@@ -70,27 +49,6 @@
sw \tmp, THREAD_FCR31(\thread)
.endm
- .macro fpu_restore_double thread status tmp=t0
- lw \tmp, THREAD_FCR31(\thread)
- ldc1 $f0, THREAD_FPR0(\thread)
- ldc1 $f2, THREAD_FPR2(\thread)
- ldc1 $f4, THREAD_FPR4(\thread)
- ldc1 $f6, THREAD_FPR6(\thread)
- ldc1 $f8, THREAD_FPR8(\thread)
- ldc1 $f10, THREAD_FPR10(\thread)
- ldc1 $f12, THREAD_FPR12(\thread)
- ldc1 $f14, THREAD_FPR14(\thread)
- ldc1 $f16, THREAD_FPR16(\thread)
- ldc1 $f18, THREAD_FPR18(\thread)
- ldc1 $f20, THREAD_FPR20(\thread)
- ldc1 $f22, THREAD_FPR22(\thread)
- ldc1 $f24, THREAD_FPR24(\thread)
- ldc1 $f26, THREAD_FPR26(\thread)
- ldc1 $f28, THREAD_FPR28(\thread)
- ldc1 $f30, THREAD_FPR30(\thread)
- ctc1 \tmp, fcr31
- .endm
-
.macro fpu_restore_single thread tmp=t0
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0(\thread)
diff --git a/arch/mips/include/asm/asmmacro-64.h b/arch/mips/include/asm/asmmacro-64.h
index 08a527d..38ea609 100644
--- a/arch/mips/include/asm/asmmacro-64.h
+++ b/arch/mips/include/asm/asmmacro-64.h
@@ -13,102 +13,6 @@
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
- .macro fpu_save_16even thread tmp=t0
- cfc1 \tmp, fcr31
- sdc1 $f0, THREAD_FPR0(\thread)
- sdc1 $f2, THREAD_FPR2(\thread)
- sdc1 $f4, THREAD_FPR4(\thread)
- sdc1 $f6, THREAD_FPR6(\thread)
- sdc1 $f8, THREAD_FPR8(\thread)
- sdc1 $f10, THREAD_FPR10(\thread)
- sdc1 $f12, THREAD_FPR12(\thread)
- sdc1 $f14, THREAD_FPR14(\thread)
- sdc1 $f16, THREAD_FPR16(\thread)
- sdc1 $f18, THREAD_FPR18(\thread)
- sdc1 $f20, THREAD_FPR20(\thread)
- sdc1 $f22, THREAD_FPR22(\thread)
- sdc1 $f24, THREAD_FPR24(\thread)
- sdc1 $f26, THREAD_FPR26(\thread)
- sdc1 $f28, THREAD_FPR28(\thread)
- sdc1 $f30, THREAD_FPR30(\thread)
- sw \tmp, THREAD_FCR31(\thread)
- .endm
-
- .macro fpu_save_16odd thread
- sdc1 $f1, THREAD_FPR1(\thread)
- sdc1 $f3, THREAD_FPR3(\thread)
- sdc1 $f5, THREAD_FPR5(\thread)
- sdc1 $f7, THREAD_FPR7(\thread)
- sdc1 $f9, THREAD_FPR9(\thread)
- sdc1 $f11, THREAD_FPR11(\thread)
- sdc1 $f13, THREAD_FPR13(\thread)
- sdc1 $f15, THREAD_FPR15(\thread)
- sdc1 $f17, THREAD_FPR17(\thread)
- sdc1 $f19, THREAD_FPR19(\thread)
- sdc1 $f21, THREAD_FPR21(\thread)
- sdc1 $f23, THREAD_FPR23(\thread)
- sdc1 $f25, THREAD_FPR25(\thread)
- sdc1 $f27, THREAD_FPR27(\thread)
- sdc1 $f29, THREAD_FPR29(\thread)
- sdc1 $f31, THREAD_FPR31(\thread)
- .endm
-
- .macro fpu_save_double thread status tmp
- sll \tmp, \status, 5
- bgez \tmp, 2f
- fpu_save_16odd \thread
-2:
- fpu_save_16even \thread \tmp
- .endm
-
- .macro fpu_restore_16even thread tmp=t0
- lw \tmp, THREAD_FCR31(\thread)
- ldc1 $f0, THREAD_FPR0(\thread)
- ldc1 $f2, THREAD_FPR2(\thread)
- ldc1 $f4, THREAD_FPR4(\thread)
- ldc1 $f6, THREAD_FPR6(\thread)
- ldc1 $f8, THREAD_FPR8(\thread)
- ldc1 $f10, THREAD_FPR10(\thread)
- ldc1 $f12, THREAD_FPR12(\thread)
- ldc1 $f14, THREAD_FPR14(\thread)
- ldc1 $f16, THREAD_FPR16(\thread)
- ldc1 $f18, THREAD_FPR18(\thread)
- ldc1 $f20, THREAD_FPR20(\thread)
- ldc1 $f22, THREAD_FPR22(\thread)
- ldc1 $f24, THREAD_FPR24(\thread)
- ldc1 $f26, THREAD_FPR26(\thread)
- ldc1 $f28, THREAD_FPR28(\thread)
- ldc1 $f30, THREAD_FPR30(\thread)
- ctc1 \tmp, fcr31
- .endm
-
- .macro fpu_restore_16odd thread
- ldc1 $f1, THREAD_FPR1(\thread)
- ldc1 $f3, THREAD_FPR3(\thread)
- ldc1 $f5, THREAD_FPR5(\thread)
- ldc1 $f7, THREAD_FPR7(\thread)
- ldc1 $f9, THREAD_FPR9(\thread)
- ldc1 $f11, THREAD_FPR11(\thread)
- ldc1 $f13, THREAD_FPR13(\thread)
- ldc1 $f15, THREAD_FPR15(\thread)
- ldc1 $f17, THREAD_FPR17(\thread)
- ldc1 $f19, THREAD_FPR19(\thread)
- ldc1 $f21, THREAD_FPR21(\thread)
- ldc1 $f23, THREAD_FPR23(\thread)
- ldc1 $f25, THREAD_FPR25(\thread)
- ldc1 $f27, THREAD_FPR27(\thread)
- ldc1 $f29, THREAD_FPR29(\thread)
- ldc1 $f31, THREAD_FPR31(\thread)
- .endm
-
- .macro fpu_restore_double thread status tmp
- sll \tmp, \status, 5
- bgez \tmp, 1f # 16 register mode?
-
- fpu_restore_16odd \thread
-1: fpu_restore_16even \thread \tmp
- .endm
-
.macro cpu_save_nonscratch thread
LONG_S s0, THREAD_REG16(\thread)
LONG_S s1, THREAD_REG17(\thread)
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 6c8342a..3220c93 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -62,6 +62,113 @@
.endm
#endif /* CONFIG_MIPS_MT_SMTC */
+ .macro fpu_save_16even thread tmp=t0
+ cfc1 \tmp, fcr31
+ sdc1 $f0, THREAD_FPR0(\thread)
+ sdc1 $f2, THREAD_FPR2(\thread)
+ sdc1 $f4, THREAD_FPR4(\thread)
+ sdc1 $f6, THREAD_FPR6(\thread)
+ sdc1 $f8, THREAD_FPR8(\thread)
+ sdc1 $f10, THREAD_FPR10(\thread)
+ sdc1 $f12, THREAD_FPR12(\thread)
+ sdc1 $f14, THREAD_FPR14(\thread)
+ sdc1 $f16, THREAD_FPR16(\thread)
+ sdc1 $f18, THREAD_FPR18(\thread)
+ sdc1 $f20, THREAD_FPR20(\thread)
+ sdc1 $f22, THREAD_FPR22(\thread)
+ sdc1 $f24, THREAD_FPR24(\thread)
+ sdc1 $f26, THREAD_FPR26(\thread)
+ sdc1 $f28, THREAD_FPR28(\thread)
+ sdc1 $f30, THREAD_FPR30(\thread)
+ sw \tmp, THREAD_FCR31(\thread)
+ .endm
+
+ .macro fpu_save_16odd thread
+ .set push
+ .set mips64r2
+ sdc1 $f1, THREAD_FPR1(\thread)
+ sdc1 $f3, THREAD_FPR3(\thread)
+ sdc1 $f5, THREAD_FPR5(\thread)
+ sdc1 $f7, THREAD_FPR7(\thread)
+ sdc1 $f9, THREAD_FPR9(\thread)
+ sdc1 $f11, THREAD_FPR11(\thread)
+ sdc1 $f13, THREAD_FPR13(\thread)
+ sdc1 $f15, THREAD_FPR15(\thread)
+ sdc1 $f17, THREAD_FPR17(\thread)
+ sdc1 $f19, THREAD_FPR19(\thread)
+ sdc1 $f21, THREAD_FPR21(\thread)
+ sdc1 $f23, THREAD_FPR23(\thread)
+ sdc1 $f25, THREAD_FPR25(\thread)
+ sdc1 $f27, THREAD_FPR27(\thread)
+ sdc1 $f29, THREAD_FPR29(\thread)
+ sdc1 $f31, THREAD_FPR31(\thread)
+ .set pop
+ .endm
+
+ .macro fpu_save_double thread status tmp
+#if defined(CONFIG_MIPS64) || defined(CONFIG_CPU_MIPS32_R2)
+ sll \tmp, \status, 5
+ bgez \tmp, 10f
+ fpu_save_16odd \thread
+10:
+#endif
+ fpu_save_16even \thread \tmp
+ .endm
+
+ .macro fpu_restore_16even thread tmp=t0
+ lw \tmp, THREAD_FCR31(\thread)
+ ldc1 $f0, THREAD_FPR0(\thread)
+ ldc1 $f2, THREAD_FPR2(\thread)
+ ldc1 $f4, THREAD_FPR4(\thread)
+ ldc1 $f6, THREAD_FPR6(\thread)
+ ldc1 $f8, THREAD_FPR8(\thread)
+ ldc1 $f10, THREAD_FPR10(\thread)
+ ldc1 $f12, THREAD_FPR12(\thread)
+ ldc1 $f14, THREAD_FPR14(\thread)
+ ldc1 $f16, THREAD_FPR16(\thread)
+ ldc1 $f18, THREAD_FPR18(\thread)
+ ldc1 $f20, THREAD_FPR20(\thread)
+ ldc1 $f22, THREAD_FPR22(\thread)
+ ldc1 $f24, THREAD_FPR24(\thread)
+ ldc1 $f26, THREAD_FPR26(\thread)
+ ldc1 $f28, THREAD_FPR28(\thread)
+ ldc1 $f30, THREAD_FPR30(\thread)
+ ctc1 \tmp, fcr31
+ .endm
+
+ .macro fpu_restore_16odd thread
+ .set push
+ .set mips64r2
+ ldc1 $f1, THREAD_FPR1(\thread)
+ ldc1 $f3, THREAD_FPR3(\thread)
+ ldc1 $f5, THREAD_FPR5(\thread)
+ ldc1 $f7, THREAD_FPR7(\thread)
+ ldc1 $f9, THREAD_FPR9(\thread)
+ ldc1 $f11, THREAD_FPR11(\thread)
+ ldc1 $f13, THREAD_FPR13(\thread)
+ ldc1 $f15, THREAD_FPR15(\thread)
+ ldc1 $f17, THREAD_FPR17(\thread)
+ ldc1 $f19, THREAD_FPR19(\thread)
+ ldc1 $f21, THREAD_FPR21(\thread)
+ ldc1 $f23, THREAD_FPR23(\thread)
+ ldc1 $f25, THREAD_FPR25(\thread)
+ ldc1 $f27, THREAD_FPR27(\thread)
+ ldc1 $f29, THREAD_FPR29(\thread)
+ ldc1 $f31, THREAD_FPR31(\thread)
+ .set pop
+ .endm
+
+ .macro fpu_restore_double thread status tmp
+#if defined(CONFIG_MIPS64) || defined(CONFIG_CPU_MIPS32_R2)
+ sll \tmp, \status, 5
+ bgez \tmp, 10f # 16 register mode?
+
+ fpu_restore_16odd \thread
+10:
+#endif
+ fpu_restore_16even \thread \tmp
+ .endm
+
/*
* Temporary until all gas have MT ASE support
*/
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index 27bd060..cbacceb 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -46,8 +46,35 @@
#include <linux/cpumask.h>
#include <asm/r4kcache.h>
+#include <asm/smp-ops.h>
-extern struct plat_smp_ops bmips_smp_ops;
+extern struct plat_smp_ops bmips43xx_smp_ops;
+extern struct plat_smp_ops bmips5000_smp_ops;
+
+static inline int register_bmips_smp_ops(void)
+{
+#if IS_ENABLED(CONFIG_CPU_BMIPS) && IS_ENABLED(CONFIG_SMP)
+ switch (current_cpu_type()) {
+ case CPU_BMIPS32:
+ case CPU_BMIPS3300:
+ return register_up_smp_ops();
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ register_smp_ops(&bmips43xx_smp_ops);
+ break;
+ case CPU_BMIPS5000:
+ register_smp_ops(&bmips5000_smp_ops);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+#else
+ return -ENODEV;
+#endif
+}
+
extern char bmips_reset_nmi_vec;
extern char bmips_reset_nmi_vec_end;
extern char bmips_smp_movevec;
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index d445d06..6e70b03 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -20,6 +20,13 @@
#ifndef cpu_has_tlb
#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB)
#endif
+#ifndef cpu_has_tlbinv
+#define cpu_has_tlbinv (cpu_data[0].options & MIPS_CPU_TLBINV)
+#endif
+#ifndef cpu_has_segments
+#define cpu_has_segments (cpu_data[0].options & MIPS_CPU_SEGMENTS)
+#endif
+
/*
* For the moment we don't consider R6000 and R8000 so we can assume that
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index 21c8e29..8f7adf0 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -52,6 +52,9 @@
unsigned int cputype;
int isa_level;
int tlbsize;
+ int tlbsizevtlb;
+ int tlbsizeftlbsets;
+ int tlbsizeftlbways;
struct cache_desc icache; /* Primary I-cache */
struct cache_desc dcache; /* Primary D or combined I/D cache */
struct cache_desc scache; /* Secondary cache */
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index 4a402cc..02f591b 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -27,10 +27,7 @@
#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
case CPU_4KC:
case CPU_ALCHEMY:
- case CPU_BMIPS3300:
- case CPU_BMIPS4350:
case CPU_PR4450:
- case CPU_BMIPS32:
case CPU_JZRISC:
#endif
@@ -47,6 +44,8 @@
case CPU_74K:
case CPU_M14KC:
case CPU_M14KEC:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
#endif
#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1
@@ -163,6 +162,16 @@
case CPU_CAVIUM_OCTEON2:
#endif
+#if defined(CONFIG_SYS_HAS_CPU_BMIPS32_3300) || \
+ defined (CONFIG_SYS_HAS_CPU_MIPS32_R1)
+ case CPU_BMIPS32:
+ case CPU_BMIPS3300:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4350
+ case CPU_BMIPS4350:
+#endif
+
#ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
case CPU_BMIPS4380:
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index d2035e1..76411df 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -111,6 +111,10 @@
#define PRID_IMP_1074K 0x9a00
#define PRID_IMP_M14KC 0x9c00
#define PRID_IMP_M14KEC 0x9e00
+#define PRID_IMP_INTERAPTIV_UP 0xa000
+#define PRID_IMP_INTERAPTIV_MP 0xa100
+#define PRID_IMP_PROAPTIV_UP 0xa200
+#define PRID_IMP_PROAPTIV_MP 0xa300
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -194,6 +198,7 @@
#define PRID_IMP_NETLOGIC_XLP8XX 0x1000
#define PRID_IMP_NETLOGIC_XLP3XX 0x1100
#define PRID_IMP_NETLOGIC_XLP2XX 0x1200
+#define PRID_IMP_NETLOGIC_XLP9XX 0x1500
/*
* Particular Revision values for bits 7:0 of the PRId register.
@@ -249,6 +254,8 @@
#define FPIR_IMP_NONE 0x0000
+#if !defined(__ASSEMBLY__)
+
enum cpu_type_enum {
CPU_UNKNOWN,
@@ -289,7 +296,7 @@
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1, CPU_M14KC,
- CPU_M14KEC,
+ CPU_M14KEC, CPU_INTERAPTIV, CPU_PROAPTIV,
/*
* MIPS64 class processors
@@ -301,6 +308,7 @@
CPU_LAST
};
+#endif /* !__ASSEMBLY */
/*
* ISA Level encodings
@@ -348,6 +356,8 @@
#define MIPS_CPU_PCI 0x00400000 /* CPU has Perf Ctr Int indicator */
#define MIPS_CPU_RIXI 0x00800000 /* CPU has TLB Read/eXec Inhibit */
#define MIPS_CPU_MICROMIPS 0x01000000 /* CPU has microMIPS capability */
+#define MIPS_CPU_TLBINV 0x02000000 /* CPU supports TLBINV/F */
+#define MIPS_CPU_SEGMENTS 0x04000000 /* CPU supports Segmentation Control registers */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index 242cbb3..bc5e85d 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -9,7 +9,16 @@
#ifndef __ASM_DMA_COHERENCE_H
#define __ASM_DMA_COHERENCE_H
+#ifdef CONFIG_DMA_MAYBE_COHERENT
extern int coherentio;
extern int hw_coherentio;
+#else
+#ifdef CONFIG_DMA_COHERENT
+#define coherentio 1
+#else
+#define coherentio 0
+#endif
+#define hw_coherentio 0
+#endif /* CONFIG_DMA_MAYBE_COHERENT */
#endif
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index a66359e..d414405 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -36,6 +36,7 @@
#define EF_MIPS_ABI2 0x00000020
#define EF_MIPS_OPTIONS_FIRST 0x00000080
#define EF_MIPS_32BITMODE 0x00000100
+#define EF_MIPS_FP64 0x00000200
#define EF_MIPS_ABI 0x0000f000
#define EF_MIPS_ARCH 0xf0000000
@@ -176,6 +177,18 @@
#ifdef CONFIG_32BIT
/*
+ * In order to be sure that we don't attempt to execute an O32 binary which
+ * requires 64 bit FP (FR=1) on a system which does not support it we refuse
+ * to execute any binary which has bits specified by the following macro set
+ * in its ELF header flags.
+ */
+#ifdef CONFIG_MIPS_O32_FP64_SUPPORT
+# define __MIPS_O32_FP64_MUST_BE_ZERO 0
+#else
+# define __MIPS_O32_FP64_MUST_BE_ZERO EF_MIPS_FP64
+#endif
+
+/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define elf_check_arch(hdr) \
@@ -192,6 +205,8 @@
if (((__h->e_flags & EF_MIPS_ABI) != 0) && \
((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32)) \
__res = 0; \
+ if (__h->e_flags & __MIPS_O32_FP64_MUST_BE_ZERO) \
+ __res = 0; \
\
__res; \
})
@@ -249,6 +264,11 @@
#define SET_PERSONALITY(ex) \
do { \
+ if ((ex).e_flags & EF_MIPS_FP64) \
+ clear_thread_flag(TIF_32BIT_FPREGS); \
+ else \
+ set_thread_flag(TIF_32BIT_FPREGS); \
+ \
if (personality(current->personality) != PER_LINUX) \
set_personality(PER_LINUX); \
\
@@ -271,14 +291,18 @@
#endif
#ifdef CONFIG_MIPS32_O32
-#define __SET_PERSONALITY32_O32() \
+#define __SET_PERSONALITY32_O32(ex) \
do { \
set_thread_flag(TIF_32BIT_REGS); \
set_thread_flag(TIF_32BIT_ADDR); \
+ \
+ if (!((ex).e_flags & EF_MIPS_FP64)) \
+ set_thread_flag(TIF_32BIT_FPREGS); \
+ \
current->thread.abi = &mips_abi_32; \
} while (0)
#else
-#define __SET_PERSONALITY32_O32() \
+#define __SET_PERSONALITY32_O32(ex) \
do { } while (0)
#endif
@@ -289,7 +313,7 @@
((ex).e_flags & EF_MIPS_ABI) == 0) \
__SET_PERSONALITY32_N32(); \
else \
- __SET_PERSONALITY32_O32(); \
+ __SET_PERSONALITY32_O32(ex); \
} while (0)
#else
#define __SET_PERSONALITY32(ex) do { } while (0)
@@ -300,6 +324,7 @@
unsigned int p; \
\
clear_thread_flag(TIF_32BIT_REGS); \
+ clear_thread_flag(TIF_32BIT_FPREGS); \
clear_thread_flag(TIF_32BIT_ADDR); \
\
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index d088e5d..cfe092f 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -33,11 +33,48 @@
extern void _save_fp(struct task_struct *);
extern void _restore_fp(struct task_struct *);
-#define __enable_fpu() \
-do { \
- set_c0_status(ST0_CU1); \
- enable_fpu_hazard(); \
-} while (0)
+/*
+ * This enum specifies a mode in which we want the FPU to operate, for cores
+ * which implement the Status.FR bit. Note that FPU_32BIT & FPU_64BIT
+ * purposefully have the values 0 & 1 respectively, so that an integer value
+ * of Status.FR can be trivially casted to the corresponding enum fpu_mode.
+ */
+enum fpu_mode {
+ FPU_32BIT = 0, /* FR = 0 */
+ FPU_64BIT, /* FR = 1 */
+ FPU_AS_IS,
+};
+
+static inline int __enable_fpu(enum fpu_mode mode)
+{
+ int fr;
+
+ switch (mode) {
+ case FPU_AS_IS:
+ /* just enable the FPU in its current mode */
+ set_c0_status(ST0_CU1);
+ enable_fpu_hazard();
+ return 0;
+
+ case FPU_64BIT:
+#if !(defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_MIPS64))
+ /* we only have a 32-bit FPU */
+ return SIGFPE;
+#endif
+ /* fall through */
+ case FPU_32BIT:
+ /* set CU1 & change FR appropriately */
+ fr = (int)mode;
+ change_c0_status(ST0_CU1 | ST0_FR, ST0_CU1 | (fr ? ST0_FR : 0));
+ enable_fpu_hazard();
+
+ /* check FR has the desired value */
+ return (!!(read_c0_status() & ST0_FR) == !!fr) ? 0 : SIGFPE;
+
+ default:
+ BUG();
+ }
+}
#define __disable_fpu() \
do { \
@@ -45,19 +82,6 @@
disable_fpu_hazard(); \
} while (0)
-#define enable_fpu() \
-do { \
- if (cpu_has_fpu) \
- __enable_fpu(); \
-} while (0)
-
-#define disable_fpu() \
-do { \
- if (cpu_has_fpu) \
- __disable_fpu(); \
-} while (0)
-
-
#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU)
static inline int __is_fpu_owner(void)
@@ -70,27 +94,46 @@
return cpu_has_fpu && __is_fpu_owner();
}
-static inline void __own_fpu(void)
+static inline int __own_fpu(void)
{
- __enable_fpu();
+ enum fpu_mode mode;
+ int ret;
+
+ mode = !test_thread_flag(TIF_32BIT_FPREGS);
+ ret = __enable_fpu(mode);
+ if (ret)
+ return ret;
+
KSTK_STATUS(current) |= ST0_CU1;
+ if (mode == FPU_64BIT)
+ KSTK_STATUS(current) |= ST0_FR;
+ else /* mode == FPU_32BIT */
+ KSTK_STATUS(current) &= ~ST0_FR;
+
set_thread_flag(TIF_USEDFPU);
+ return 0;
}
-static inline void own_fpu_inatomic(int restore)
+static inline int own_fpu_inatomic(int restore)
{
+ int ret = 0;
+
if (cpu_has_fpu && !__is_fpu_owner()) {
- __own_fpu();
- if (restore)
+ ret = __own_fpu();
+ if (restore && !ret)
_restore_fp(current);
}
+ return ret;
}
-static inline void own_fpu(int restore)
+static inline int own_fpu(int restore)
{
+ int ret;
+
preempt_disable();
- own_fpu_inatomic(restore);
+ ret = own_fpu_inatomic(restore);
preempt_enable();
+ return ret;
}
static inline void lose_fpu(int save)
@@ -106,16 +149,21 @@
preempt_enable();
}
-static inline void init_fpu(void)
+static inline int init_fpu(void)
{
+ int ret = 0;
+
preempt_disable();
if (cpu_has_fpu) {
- __own_fpu();
- _init_fpu();
+ ret = __own_fpu();
+ if (!ret)
+ _init_fpu();
} else {
fpu_emulator_init_fpu();
}
+
preempt_enable();
+ return ret;
}
static inline void save_fp(struct task_struct *tsk)
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index b0dd0c8..572e63e 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -19,7 +19,6 @@
#ifdef __KERNEL__
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
#include <asm/kmap_types.h>
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 3296696..a995fce 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -391,9 +391,6 @@
uint32_t guest_kernel_asid[NR_CPUS];
struct mm_struct guest_kernel_mm, guest_user_mm;
- struct kvm_mips_tlb shadow_tlb[NR_CPUS][KVM_MIPS_GUEST_TLB_SIZE];
-
-
struct hrtimer comparecount_timer;
int last_sched_cpu;
@@ -529,7 +526,6 @@
extern void kvm_mips_dump_host_tlbs(void);
extern void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu);
-extern void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu);
extern void kvm_mips_flush_host_tlb(int skip_kseg0);
extern int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long entryhi);
extern int kvm_mips_host_tlb_inv_index(struct kvm_vcpu *vcpu, int index);
@@ -541,10 +537,7 @@
unsigned long gva);
extern void kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu,
struct kvm_vcpu *vcpu);
-extern void kvm_shadow_tlb_put(struct kvm_vcpu *vcpu);
-extern void kvm_shadow_tlb_load(struct kvm_vcpu *vcpu);
extern void kvm_local_flush_tlb_all(void);
-extern void kvm_mips_init_shadow_tlb(struct kvm_vcpu *vcpu);
extern void kvm_mips_alloc_new_mmu_context(struct kvm_vcpu *vcpu);
extern void kvm_mips_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
extern void kvm_mips_vcpu_put(struct kvm_vcpu *vcpu);
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index b86a125..cd41e93 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -16,7 +16,6 @@
#define __ASM_MACH_AR71XX_REGS_H
#include <linux/types.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/bitops.h>
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index cc7563b..7527c1d 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -56,4 +56,6 @@
const char *prefix);
#endif
+void bcm47xx_set_system_type(u16 chip_id);
+
#endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index 00867dd..40005fb 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -66,6 +66,7 @@
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+ BCM47XX_BOARD_LINKSYS_WRT54GSV1,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,
diff --git a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
new file mode 100644
index 0000000..b7992cd
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_watch 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_watch 0
+#endif
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+/* cpu_has_mips16 */
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_rixi 0
+#define cpu_has_mmips 0
+#define cpu_has_smartmips 0
+#define cpu_has_vtag_icache 0
+/* cpu_has_dc_aliases */
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_pindexed_dcache 0
+#define cpu_icache_snoops_remote_store 0
+
+#define cpu_has_mips_2 1
+#define cpu_has_mips_3 0
+#define cpu_has_mips32r1 1
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_mips32r2 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_mips32r2 0
+#endif
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_dsp 1
+#define cpu_has_dsp2 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
+#endif
+#define cpu_has_mipsmt 0
+/* cpu_has_userlocal */
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_vint 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_vint 0
+#endif
+#define cpu_has_veic 0
+#define cpu_has_inclusive_pcaches 0
+
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_has_perf_cntr_intr_bit 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+#define cpu_has_perf_cntr_intr_bit 0
+#endif
+#define cpu_scache_line_size() 0
+#define cpu_has_vz 0
+
+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index 19f9134..3112f08 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -145,6 +145,7 @@
RSET_UART1,
RSET_GPIO,
RSET_SPI,
+ RSET_HSSPI,
RSET_UDC0,
RSET_OHCI0,
RSET_OHCI_PRIV,
@@ -193,6 +194,7 @@
#define RSET_ENETDMAS_SIZE(chans) (16 * (chans))
#define RSET_ENETSW_SIZE 65536
#define RSET_UART_SIZE 24
+#define RSET_HSSPI_SIZE 1536
#define RSET_UDC_SIZE 256
#define RSET_OHCI_SIZE 256
#define RSET_EHCI_SIZE 256
@@ -265,6 +267,7 @@
#define BCM_6328_UART1_BASE (0xb0000120)
#define BCM_6328_GPIO_BASE (0xb0000080)
#define BCM_6328_SPI_BASE (0xdeadbeef)
+#define BCM_6328_HSSPI_BASE (0xb0001000)
#define BCM_6328_UDC0_BASE (0xdeadbeef)
#define BCM_6328_USBDMA_BASE (0xb000c000)
#define BCM_6328_OHCI0_BASE (0xb0002600)
@@ -313,6 +316,7 @@
#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
+#define BCM_6338_HSSPI_BASE (0xdeadbeef)
#define BCM_6338_UDC0_BASE (0xdeadbeef)
#define BCM_6338_USBDMA_BASE (0xfffe2400)
#define BCM_6338_OHCI0_BASE (0xdeadbeef)
@@ -360,6 +364,7 @@
#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
+#define BCM_6345_HSSPI_BASE (0xdeadbeef)
#define BCM_6345_UDC0_BASE (0xdeadbeef)
#define BCM_6345_USBDMA_BASE (0xfffe2800)
#define BCM_6345_ENET0_BASE (0xfffe1800)
@@ -406,6 +411,7 @@
#define BCM_6348_UART1_BASE (0xdeadbeef)
#define BCM_6348_GPIO_BASE (0xfffe0400)
#define BCM_6348_SPI_BASE (0xfffe0c00)
+#define BCM_6348_HSSPI_BASE (0xdeadbeef)
#define BCM_6348_UDC0_BASE (0xfffe1000)
#define BCM_6348_USBDMA_BASE (0xdeadbeef)
#define BCM_6348_OHCI0_BASE (0xfffe1b00)
@@ -451,6 +457,7 @@
#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
#define BCM_6358_SPI_BASE (0xfffe0800)
+#define BCM_6358_HSSPI_BASE (0xdeadbeef)
#define BCM_6358_UDC0_BASE (0xfffe0800)
#define BCM_6358_USBDMA_BASE (0xdeadbeef)
#define BCM_6358_OHCI0_BASE (0xfffe1400)
@@ -553,6 +560,7 @@
#define BCM_6368_UART1_BASE (0xb0000120)
#define BCM_6368_GPIO_BASE (0xb0000080)
#define BCM_6368_SPI_BASE (0xb0000800)
+#define BCM_6368_HSSPI_BASE (0xdeadbeef)
#define BCM_6368_UDC0_BASE (0xdeadbeef)
#define BCM_6368_USBDMA_BASE (0xb0004800)
#define BCM_6368_OHCI0_BASE (0xb0001600)
@@ -604,6 +612,7 @@
__GEN_RSET_BASE(__cpu, UART1) \
__GEN_RSET_BASE(__cpu, GPIO) \
__GEN_RSET_BASE(__cpu, SPI) \
+ __GEN_RSET_BASE(__cpu, HSSPI) \
__GEN_RSET_BASE(__cpu, UDC0) \
__GEN_RSET_BASE(__cpu, OHCI0) \
__GEN_RSET_BASE(__cpu, OHCI_PRIV) \
@@ -647,6 +656,7 @@
[RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \
[RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \
[RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \
+ [RSET_HSSPI] = BCM_## __cpu ##_HSSPI_BASE, \
[RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \
[RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \
[RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \
@@ -727,6 +737,7 @@
IRQ_ENET0,
IRQ_ENET1,
IRQ_ENET_PHY,
+ IRQ_HSSPI,
IRQ_OHCI0,
IRQ_EHCI0,
IRQ_USBD,
@@ -815,6 +826,7 @@
#define BCM_6328_ENET0_IRQ 0
#define BCM_6328_ENET1_IRQ 0
#define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6328_HSSPI_IRQ (IRQ_INTERNAL_BASE + 29)
#define BCM_6328_OHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 9)
#define BCM_6328_EHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 10)
#define BCM_6328_USBD_IRQ (IRQ_INTERNAL_BASE + 4)
@@ -860,6 +872,7 @@
#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6338_ENET1_IRQ 0
#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_HSSPI_IRQ 0
#define BCM_6338_OHCI0_IRQ 0
#define BCM_6338_EHCI0_IRQ 0
#define BCM_6338_USBD_IRQ 0
@@ -898,6 +911,7 @@
#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6345_ENET1_IRQ 0
#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_HSSPI_IRQ 0
#define BCM_6345_OHCI0_IRQ 0
#define BCM_6345_EHCI0_IRQ 0
#define BCM_6345_USBD_IRQ 0
@@ -936,6 +950,7 @@
#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_HSSPI_IRQ 0
#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
#define BCM_6348_EHCI0_IRQ 0
#define BCM_6348_USBD_IRQ 0
@@ -974,6 +989,7 @@
#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_HSSPI_IRQ 0
#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
#define BCM_6358_USBD_IRQ 0
@@ -1086,6 +1102,7 @@
#define BCM_6368_ENET0_IRQ 0
#define BCM_6368_ENET1_IRQ 0
#define BCM_6368_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 15)
+#define BCM_6368_HSSPI_IRQ 0
#define BCM_6368_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6368_EHCI0_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6368_USBD_IRQ (IRQ_INTERNAL_BASE + 8)
@@ -1133,6 +1150,7 @@
[IRQ_ENET0] = BCM_## __cpu ##_ENET0_IRQ, \
[IRQ_ENET1] = BCM_## __cpu ##_ENET1_IRQ, \
[IRQ_ENET_PHY] = BCM_## __cpu ##_ENET_PHY_IRQ, \
+ [IRQ_HSSPI] = BCM_## __cpu ##_HSSPI_IRQ, \
[IRQ_OHCI0] = BCM_## __cpu ##_OHCI0_IRQ, \
[IRQ_EHCI0] = BCM_## __cpu ##_EHCI0_IRQ, \
[IRQ_USBD] = BCM_## __cpu ##_USBD_IRQ, \
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
new file mode 100644
index 0000000..1b1acaf
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
@@ -0,0 +1,8 @@
+#ifndef BCM63XX_DEV_HSSPI_H
+#define BCM63XX_DEV_HSSPI_H
+
+#include <linux/types.h>
+
+int bcm63xx_hsspi_register(void);
+
+#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 9875db3..ab427f8 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -463,126 +463,6 @@
#define WDT_SOFTRESET_REG 0xc
/*************************************************************************
- * _REG relative to RSET_UARTx
- *************************************************************************/
-
-/* UART Control Register */
-#define UART_CTL_REG 0x0
-#define UART_CTL_RXTMOUTCNT_SHIFT 0
-#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
-#define UART_CTL_RSTTXDN_SHIFT 5
-#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT)
-#define UART_CTL_RSTRXFIFO_SHIFT 6
-#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT)
-#define UART_CTL_RSTTXFIFO_SHIFT 7
-#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT)
-#define UART_CTL_STOPBITS_SHIFT 8
-#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT)
-#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT)
-#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT)
-#define UART_CTL_BITSPERSYM_SHIFT 12
-#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT)
-#define UART_CTL_XMITBRK_SHIFT 14
-#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT)
-#define UART_CTL_RSVD_SHIFT 15
-#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT)
-#define UART_CTL_RXPAREVEN_SHIFT 16
-#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT)
-#define UART_CTL_RXPAREN_SHIFT 17
-#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT)
-#define UART_CTL_TXPAREVEN_SHIFT 18
-#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT)
-#define UART_CTL_TXPAREN_SHIFT 18
-#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT)
-#define UART_CTL_LOOPBACK_SHIFT 20
-#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT)
-#define UART_CTL_RXEN_SHIFT 21
-#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT)
-#define UART_CTL_TXEN_SHIFT 22
-#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT)
-#define UART_CTL_BRGEN_SHIFT 23
-#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT)
-
-/* UART Baudword register */
-#define UART_BAUD_REG 0x4
-
-/* UART Misc Control register */
-#define UART_MCTL_REG 0x8
-#define UART_MCTL_DTR_SHIFT 0
-#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT)
-#define UART_MCTL_RTS_SHIFT 1
-#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT)
-#define UART_MCTL_RXFIFOTHRESH_SHIFT 8
-#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
-#define UART_MCTL_TXFIFOTHRESH_SHIFT 12
-#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
-#define UART_MCTL_RXFIFOFILL_SHIFT 16
-#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
-#define UART_MCTL_TXFIFOFILL_SHIFT 24
-#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
-
-/* UART External Input Configuration register */
-#define UART_EXTINP_REG 0xc
-#define UART_EXTINP_RI_SHIFT 0
-#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT)
-#define UART_EXTINP_CTS_SHIFT 1
-#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT)
-#define UART_EXTINP_DCD_SHIFT 2
-#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT)
-#define UART_EXTINP_DSR_SHIFT 3
-#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT)
-#define UART_EXTINP_IRSTAT(x) (1 << (x + 4))
-#define UART_EXTINP_IRMASK(x) (1 << (x + 8))
-#define UART_EXTINP_IR_RI 0
-#define UART_EXTINP_IR_CTS 1
-#define UART_EXTINP_IR_DCD 2
-#define UART_EXTINP_IR_DSR 3
-#define UART_EXTINP_RI_NOSENSE_SHIFT 16
-#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT)
-#define UART_EXTINP_CTS_NOSENSE_SHIFT 17
-#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
-#define UART_EXTINP_DCD_NOSENSE_SHIFT 18
-#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
-#define UART_EXTINP_DSR_NOSENSE_SHIFT 19
-#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
-
-/* UART Interrupt register */
-#define UART_IR_REG 0x10
-#define UART_IR_MASK(x) (1 << (x + 16))
-#define UART_IR_STAT(x) (1 << (x))
-#define UART_IR_EXTIP 0
-#define UART_IR_TXUNDER 1
-#define UART_IR_TXOVER 2
-#define UART_IR_TXTRESH 3
-#define UART_IR_TXRDLATCH 4
-#define UART_IR_TXEMPTY 5
-#define UART_IR_RXUNDER 6
-#define UART_IR_RXOVER 7
-#define UART_IR_RXTIMEOUT 8
-#define UART_IR_RXFULL 9
-#define UART_IR_RXTHRESH 10
-#define UART_IR_RXNOTEMPTY 11
-#define UART_IR_RXFRAMEERR 12
-#define UART_IR_RXPARERR 13
-#define UART_IR_RXBRK 14
-#define UART_IR_TXDONE 15
-
-/* UART Fifo register */
-#define UART_FIFO_REG 0x14
-#define UART_FIFO_VALID_SHIFT 0
-#define UART_FIFO_VALID_MASK 0xff
-#define UART_FIFO_FRAMEERR_SHIFT 8
-#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT)
-#define UART_FIFO_PARERR_SHIFT 9
-#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT)
-#define UART_FIFO_BRKDET_SHIFT 10
-#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT)
-#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \
- UART_FIFO_PARERR_MASK | \
- UART_FIFO_BRKDET_MASK)
-
-
-/*************************************************************************
* _REG relative to RSET_GPIO
*************************************************************************/
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index a9e8f6b..7629c35 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,11 +49,7 @@
static inline int plat_device_is_coherent(struct device *dev)
{
-#ifdef CONFIG_DMA_COHERENT
- return 1;
-#else
return coherentio;
-#endif
}
#ifdef CONFIG_SWIOTLB
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
index 5b5cd68..e2561d9 100644
--- a/arch/mips/include/asm/mach-generic/floppy.h
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -9,7 +9,6 @@
#define __ASM_MACH_GENERIC_FLOPPY_H
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/linkage.h>
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
index affa66f..4ae5fbc 100644
--- a/arch/mips/include/asm/mach-generic/ide.h
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -23,7 +23,7 @@
static inline void __ide_flush_prologue(void)
{
#ifdef CONFIG_SMP
- if (cpu_has_dc_aliases)
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
preempt_disable();
#endif
}
@@ -31,14 +31,14 @@
static inline void __ide_flush_epilogue(void)
{
#ifdef CONFIG_SMP
- if (cpu_has_dc_aliases)
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
preempt_enable();
#endif
}
static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
{
- if (cpu_has_dc_aliases) {
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
unsigned long end = addr + size;
while (addr < end) {
diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h
index 62aa1e2..4b86c88 100644
--- a/arch/mips/include/asm/mach-jazz/floppy.h
+++ b/arch/mips/include/asm/mach-jazz/floppy.h
@@ -9,7 +9,6 @@
#define __ASM_MACH_JAZZ_FLOPPY_H
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/types.h>
#include <linux/mm.h>
diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
index 05988c2..069b43a 100644
--- a/arch/mips/include/asm/mach-jz4740/platform.h
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -21,6 +21,7 @@
extern struct platform_device jz4740_usb_ohci_device;
extern struct platform_device jz4740_udc_device;
+extern struct platform_device jz4740_udc_xceiv_device;
extern struct platform_device jz4740_mmc_device;
extern struct platform_device jz4740_rtc_device;
extern struct platform_device jz4740_i2c_device;
diff --git a/arch/mips/include/asm/mach-netlogic/irq.h b/arch/mips/include/asm/mach-netlogic/irq.h
index 868ed8a..c0dbd53 100644
--- a/arch/mips/include/asm/mach-netlogic/irq.h
+++ b/arch/mips/include/asm/mach-netlogic/irq.h
@@ -9,7 +9,8 @@
#define __ASM_NETLOGIC_IRQ_H
#include <asm/mach-netlogic/multi-node.h>
-#define NR_IRQS (64 * NLM_NR_NODES)
+#define NLM_IRQS_PER_NODE 1024
+#define NR_IRQS (NLM_IRQS_PER_NODE * NLM_NR_NODES)
#define MIPS_CPU_IRQ_BASE 0
diff --git a/arch/mips/include/asm/mach-netlogic/multi-node.h b/arch/mips/include/asm/mach-netlogic/multi-node.h
index d62fc77..9ed8dac 100644
--- a/arch/mips/include/asm/mach-netlogic/multi-node.h
+++ b/arch/mips/include/asm/mach-netlogic/multi-node.h
@@ -47,8 +47,37 @@
#endif
#endif
-#define NLM_CORES_PER_NODE 8
#define NLM_THREADS_PER_CORE 4
-#define NLM_CPUS_PER_NODE (NLM_CORES_PER_NODE * NLM_THREADS_PER_CORE)
+#ifdef CONFIG_CPU_XLR
+#define nlm_cores_per_node() 8
+#else
+extern unsigned int xlp_cores_per_node;
+#define nlm_cores_per_node() xlp_cores_per_node
+#endif
+
+#define nlm_threads_per_node() (nlm_cores_per_node() * NLM_THREADS_PER_CORE)
+#define nlm_cpuid_to_node(c) ((c) / nlm_threads_per_node())
+
+struct nlm_soc_info {
+ unsigned long coremask; /* cores enabled on the soc */
+ unsigned long ebase; /* not used now */
+ uint64_t irqmask; /* EIMR for the node */
+ uint64_t sysbase; /* only for XLP - sys block base */
+ uint64_t picbase; /* PIC block base */
+ spinlock_t piclock; /* lock for PIC access */
+ cpumask_t cpumask; /* logical cpu mask for node */
+ unsigned int socbus;
+};
+
+extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+#define nlm_get_node(i) (&nlm_nodes[i])
+#define nlm_node_present(n) ((n) >= 0 && (n) < NLM_NR_NODES && \
+ nlm_get_node(n)->coremask != 0)
+#ifdef CONFIG_CPU_XLR
+#define nlm_current_node() (&nlm_nodes[0])
+#else
+#define nlm_current_node() (&nlm_nodes[nlm_nodeid()])
+#endif
+void nlm_node_init(int node);
#endif
diff --git a/arch/mips/include/asm/mach-netlogic/topology.h b/arch/mips/include/asm/mach-netlogic/topology.h
new file mode 100644
index 0000000..0da99fa
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/topology.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Broadcom Corporation
+ */
+#ifndef _ASM_MACH_NETLOGIC_TOPOLOGY_H
+#define _ASM_MACH_NETLOGIC_TOPOLOGY_H
+
+#include <asm/mach-netlogic/multi-node.h>
+
+#define topology_physical_package_id(cpu) cpu_to_node(cpu)
+#define topology_core_id(cpu) (cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
+#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu])
+#define topology_core_cpumask(cpu) cpumask_of_node(cpu_to_node(cpu))
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
index e332279..836e2ed 100644
--- a/arch/mips/include/asm/mips-boards/piix4.h
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -26,6 +26,10 @@
#define PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE (1 << 7)
#define PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK 0xf
#define PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX 16
+/* SERIRQ Control */
+#define PIIX4_FUNC0_SERIRQC 0x64
+#define PIIX4_FUNC0_SERIRQC_EN (1 << 7)
+#define PIIX4_FUNC0_SERIRQC_CONT (1 << 6)
/* Top Of Memory */
#define PIIX4_FUNC0_TOM 0x69
#define PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK 0xf0
@@ -34,6 +38,9 @@
#define PIIX4_FUNC0_DLC_USBPR_EN (1 << 2)
#define PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN (1 << 1)
#define PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN (1 << 0)
+/* General Configuration */
+#define PIIX4_FUNC0_GENCFG 0xb0
+#define PIIX4_FUNC0_GENCFG_SERIRQ (1 << 16)
/* IDE Timing */
#define PIIX4_FUNC1_IDETIM_PRIMARY_LO 0x40
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index e033141..bbc3dd4 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -14,6 +14,7 @@
#define _ASM_MIPSREGS_H
#include <linux/linkage.h>
+#include <linux/types.h>
#include <asm/hazards.h>
#include <asm/war.h>
@@ -573,7 +574,9 @@
#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
-#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+#define MIPS_CONF1_TLBS_SHIFT (25)
+#define MIPS_CONF1_TLBS_SIZE (6)
+#define MIPS_CONF1_TLBS (_ULCAST_(63) << MIPS_CONF1_TLBS_SHIFT)
#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
@@ -587,21 +590,53 @@
#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_CDMM (_ULCAST_(1) << 3)
#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_ITL (_ULCAST_(1) << 8)
+#define MIPS_CONF3_CTXTC (_ULCAST_(1) << 9)
#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
#define MIPS_CONF3_DSP2P (_ULCAST_(1) << 11)
#define MIPS_CONF3_RXI (_ULCAST_(1) << 12)
#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
#define MIPS_CONF3_ISA (_ULCAST_(3) << 14)
#define MIPS_CONF3_ISA_OE (_ULCAST_(1) << 16)
+#define MIPS_CONF3_MCU (_ULCAST_(1) << 17)
+#define MIPS_CONF3_MMAR (_ULCAST_(7) << 18)
+#define MIPS_CONF3_IPLW (_ULCAST_(3) << 21)
#define MIPS_CONF3_VZ (_ULCAST_(1) << 23)
+#define MIPS_CONF3_PW (_ULCAST_(1) << 24)
+#define MIPS_CONF3_SC (_ULCAST_(1) << 25)
+#define MIPS_CONF3_BI (_ULCAST_(1) << 26)
+#define MIPS_CONF3_BP (_ULCAST_(1) << 27)
+#define MIPS_CONF3_MSA (_ULCAST_(1) << 28)
+#define MIPS_CONF3_CMGCR (_ULCAST_(1) << 29)
+#define MIPS_CONF3_BPG (_ULCAST_(1) << 30)
+#define MIPS_CONF4_MMUSIZEEXT_SHIFT (0)
#define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0)
+#define MIPS_CONF4_FTLBSETS_SHIFT (0)
+#define MIPS_CONF4_FTLBSETS_SHIFT (0)
+#define MIPS_CONF4_FTLBSETS (_ULCAST_(15) << MIPS_CONF4_FTLBSETS_SHIFT)
+#define MIPS_CONF4_FTLBWAYS_SHIFT (4)
+#define MIPS_CONF4_FTLBWAYS (_ULCAST_(15) << MIPS_CONF4_FTLBWAYS_SHIFT)
+#define MIPS_CONF4_FTLBPAGESIZE_SHIFT (8)
+/* bits 10:8 in FTLB-only configurations */
+#define MIPS_CONF4_FTLBPAGESIZE (_ULCAST_(7) << MIPS_CONF4_FTLBPAGESIZE_SHIFT)
+/* bits 12:8 in VTLB-FTLB only configurations */
+#define MIPS_CONF4_VFTLBPAGESIZE (_ULCAST_(31) << MIPS_CONF4_FTLBPAGESIZE_SHIFT)
#define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14)
#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
+#define MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT (_ULCAST_(2) << 14)
+#define MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT (_ULCAST_(3) << 14)
+#define MIPS_CONF4_KSCREXIST (_ULCAST_(255) << 16)
+#define MIPS_CONF4_VTLBSIZEEXT_SHIFT (24)
+#define MIPS_CONF4_VTLBSIZEEXT (_ULCAST_(15) << MIPS_CONF4_VTLBSIZEEXT_SHIFT)
+#define MIPS_CONF4_AE (_ULCAST_(1) << 28)
+#define MIPS_CONF4_IE (_ULCAST_(3) << 29)
+#define MIPS_CONF4_TLBINV (_ULCAST_(2) << 29)
#define MIPS_CONF5_NF (_ULCAST_(1) << 0)
#define MIPS_CONF5_UFR (_ULCAST_(1) << 2)
@@ -611,11 +646,15 @@
#define MIPS_CONF5_K (_ULCAST_(1) << 30)
#define MIPS_CONF6_SYND (_ULCAST_(1) << 13)
+/* proAptiv FTLB on/off bit */
+#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+/* EntryHI bit definition */
+#define MIPS_ENTRYHI_EHINV (_ULCAST_(1) << 10)
/*
* Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
@@ -628,6 +667,26 @@
#define MIPS_FPIR_L (_ULCAST_(1) << 21)
#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+/*
+ * Bits in the MIPS32 Memory Segmentation registers.
+ */
+#define MIPS_SEGCFG_PA_SHIFT 9
+#define MIPS_SEGCFG_PA (_ULCAST_(127) << MIPS_SEGCFG_PA_SHIFT)
+#define MIPS_SEGCFG_AM_SHIFT 4
+#define MIPS_SEGCFG_AM (_ULCAST_(7) << MIPS_SEGCFG_AM_SHIFT)
+#define MIPS_SEGCFG_EU_SHIFT 3
+#define MIPS_SEGCFG_EU (_ULCAST_(1) << MIPS_SEGCFG_EU_SHIFT)
+#define MIPS_SEGCFG_C_SHIFT 0
+#define MIPS_SEGCFG_C (_ULCAST_(7) << MIPS_SEGCFG_C_SHIFT)
+
+#define MIPS_SEGCFG_UUSK _ULCAST_(7)
+#define MIPS_SEGCFG_USK _ULCAST_(5)
+#define MIPS_SEGCFG_MUSUK _ULCAST_(4)
+#define MIPS_SEGCFG_MUSK _ULCAST_(3)
+#define MIPS_SEGCFG_MSK _ULCAST_(2)
+#define MIPS_SEGCFG_MK _ULCAST_(1)
+#define MIPS_SEGCFG_UK _ULCAST_(0)
+
#ifndef __ASSEMBLY__
/*
@@ -649,6 +708,19 @@
}
/*
+ * TLB Invalidate Flush
+ */
+static inline void tlbinvf(void)
+{
+ __asm__ __volatile__(
+ ".set push\n\t"
+ ".set noreorder\n\t"
+ ".word 0x42000004\n\t" /* tlbinvf */
+ ".set pop");
+}
+
+
+/*
* Functions to access the R10000 performance counters. These are basically
* mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
* performance counter number encoded into bits 1 ... 5 of the instruction.
@@ -1102,6 +1174,15 @@
#define read_c0_ebase() __read_32bit_c0_register($15, 1)
#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
+/* MIPSR3 */
+#define read_c0_segctl0() __read_32bit_c0_register($5, 2)
+#define write_c0_segctl0(val) __write_32bit_c0_register($5, 2, val)
+
+#define read_c0_segctl1() __read_32bit_c0_register($5, 3)
+#define write_c0_segctl1(val) __write_32bit_c0_register($5, 3, val)
+
+#define read_c0_segctl2() __read_32bit_c0_register($5, 4)
+#define write_c0_segctl2(val) __write_32bit_c0_register($5, 4, val)
/* Cavium OCTEON (cnMIPS) */
#define read_c0_cvmcount() __read_ulong_c0_register($9, 6)
diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h
index bb68c33..c281f03 100644
--- a/arch/mips/include/asm/netlogic/common.h
+++ b/arch/mips/include/asm/netlogic/common.h
@@ -84,7 +84,6 @@
*/
void nlm_init_boot_cpu(void);
unsigned int nlm_get_cpu_frequency(void);
-void nlm_node_init(int node);
extern struct plat_smp_ops nlm_smp_ops;
extern char nlm_reset_entry[], nlm_reset_entry_end[];
@@ -94,26 +93,16 @@
extern unsigned int nlm_threads_per_core;
extern cpumask_t nlm_cpumask;
-struct nlm_soc_info {
- unsigned long coremask; /* cores enabled on the soc */
- unsigned long ebase;
- uint64_t irqmask;
- uint64_t sysbase; /* only for XLP */
- uint64_t picbase;
- spinlock_t piclock;
-};
-
-#define nlm_get_node(i) (&nlm_nodes[i])
-#ifdef CONFIG_CPU_XLR
-#define nlm_current_node() (&nlm_nodes[0])
-#else
-#define nlm_current_node() (&nlm_nodes[nlm_nodeid()])
-#endif
-
struct irq_data;
uint64_t nlm_pci_irqmask(int node);
+void nlm_setup_pic_irq(int node, int picirq, int irq, int irt);
void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *));
+#ifdef CONFIG_PCI_MSI
+void nlm_dispatch_msi(int node, int lirq);
+void nlm_dispatch_msix(int node, int msixirq);
+#endif
+
/*
* The NR_IRQs is divided between nodes, each of them has a separate irq space
*/
@@ -122,7 +111,6 @@
return node * NR_IRQS / NLM_NR_NODES + irq;
}
-extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
extern int nlm_cpu_ready[];
#endif
#endif /* _NETLOGIC_COMMON_H_ */
diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h
index f299d31..de9aada 100644
--- a/arch/mips/include/asm/netlogic/mips-extns.h
+++ b/arch/mips/include/asm/netlogic/mips-extns.h
@@ -146,7 +146,12 @@
static inline int nlm_nodeid(void)
{
- return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;
+ uint32_t prid = read_c0_prid();
+
+ if ((prid & 0xff00) == PRID_IMP_NETLOGIC_XLP9XX)
+ return (__read_32bit_c0_register($15, 1) >> 7) & 0x7;
+ else
+ return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;
}
static inline unsigned int nlm_core_id(void)
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
index 4e8eacb..3067f98 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
@@ -69,44 +69,9 @@
#define BRIDGE_FLASH_LIMIT3 0x13
#define BRIDGE_DRAM_BAR(i) (0x14 + (i))
-#define BRIDGE_DRAM_BAR0 0x14
-#define BRIDGE_DRAM_BAR1 0x15
-#define BRIDGE_DRAM_BAR2 0x16
-#define BRIDGE_DRAM_BAR3 0x17
-#define BRIDGE_DRAM_BAR4 0x18
-#define BRIDGE_DRAM_BAR5 0x19
-#define BRIDGE_DRAM_BAR6 0x1a
-#define BRIDGE_DRAM_BAR7 0x1b
-
#define BRIDGE_DRAM_LIMIT(i) (0x1c + (i))
-#define BRIDGE_DRAM_LIMIT0 0x1c
-#define BRIDGE_DRAM_LIMIT1 0x1d
-#define BRIDGE_DRAM_LIMIT2 0x1e
-#define BRIDGE_DRAM_LIMIT3 0x1f
-#define BRIDGE_DRAM_LIMIT4 0x20
-#define BRIDGE_DRAM_LIMIT5 0x21
-#define BRIDGE_DRAM_LIMIT6 0x22
-#define BRIDGE_DRAM_LIMIT7 0x23
-
#define BRIDGE_DRAM_NODE_TRANSLN(i) (0x24 + (i))
-#define BRIDGE_DRAM_NODE_TRANSLN0 0x24
-#define BRIDGE_DRAM_NODE_TRANSLN1 0x25
-#define BRIDGE_DRAM_NODE_TRANSLN2 0x26
-#define BRIDGE_DRAM_NODE_TRANSLN3 0x27
-#define BRIDGE_DRAM_NODE_TRANSLN4 0x28
-#define BRIDGE_DRAM_NODE_TRANSLN5 0x29
-#define BRIDGE_DRAM_NODE_TRANSLN6 0x2a
-#define BRIDGE_DRAM_NODE_TRANSLN7 0x2b
-
#define BRIDGE_DRAM_CHNL_TRANSLN(i) (0x2c + (i))
-#define BRIDGE_DRAM_CHNL_TRANSLN0 0x2c
-#define BRIDGE_DRAM_CHNL_TRANSLN1 0x2d
-#define BRIDGE_DRAM_CHNL_TRANSLN2 0x2e
-#define BRIDGE_DRAM_CHNL_TRANSLN3 0x2f
-#define BRIDGE_DRAM_CHNL_TRANSLN4 0x30
-#define BRIDGE_DRAM_CHNL_TRANSLN5 0x31
-#define BRIDGE_DRAM_CHNL_TRANSLN6 0x32
-#define BRIDGE_DRAM_CHNL_TRANSLN7 0x33
#define BRIDGE_PCIEMEM_BASE0 0x34
#define BRIDGE_PCIEMEM_BASE1 0x35
@@ -178,12 +143,42 @@
#define BRIDGE_GIO_WEIGHT 0x2cb
#define BRIDGE_FLASH_WEIGHT 0x2cc
+/* FIXME verify */
+#define BRIDGE_9XX_FLASH_BAR(i) (0x11 + (i))
+#define BRIDGE_9XX_FLASH_BAR_LIMIT(i) (0x15 + (i))
+
+#define BRIDGE_9XX_DRAM_BAR(i) (0x19 + (i))
+#define BRIDGE_9XX_DRAM_LIMIT(i) (0x29 + (i))
+#define BRIDGE_9XX_DRAM_NODE_TRANSLN(i) (0x39 + (i))
+#define BRIDGE_9XX_DRAM_CHNL_TRANSLN(i) (0x49 + (i))
+
+#define BRIDGE_9XX_ADDRESS_ERROR0 0x9d
+#define BRIDGE_9XX_ADDRESS_ERROR1 0x9e
+#define BRIDGE_9XX_ADDRESS_ERROR2 0x9f
+
+#define BRIDGE_9XX_PCIEMEM_BASE0 0x59
+#define BRIDGE_9XX_PCIEMEM_BASE1 0x5a
+#define BRIDGE_9XX_PCIEMEM_BASE2 0x5b
+#define BRIDGE_9XX_PCIEMEM_BASE3 0x5c
+#define BRIDGE_9XX_PCIEMEM_LIMIT0 0x5d
+#define BRIDGE_9XX_PCIEMEM_LIMIT1 0x5e
+#define BRIDGE_9XX_PCIEMEM_LIMIT2 0x5f
+#define BRIDGE_9XX_PCIEMEM_LIMIT3 0x60
+#define BRIDGE_9XX_PCIEIO_BASE0 0x61
+#define BRIDGE_9XX_PCIEIO_BASE1 0x62
+#define BRIDGE_9XX_PCIEIO_BASE2 0x63
+#define BRIDGE_9XX_PCIEIO_BASE3 0x64
+#define BRIDGE_9XX_PCIEIO_LIMIT0 0x65
+#define BRIDGE_9XX_PCIEIO_LIMIT1 0x66
+#define BRIDGE_9XX_PCIEIO_LIMIT2 0x67
+#define BRIDGE_9XX_PCIEIO_LIMIT3 0x68
+
#ifndef __ASSEMBLY__
#define nlm_read_bridge_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_bridge_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_bridge_pcibase(node) \
- nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node))
+#define nlm_get_bridge_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_BRIDGE_OFFSET(node) : XLP_IO_BRIDGE_OFFSET(node))
#define nlm_get_bridge_regbase(node) \
(nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ)
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
index 55eee77..1f23dfa 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
@@ -48,8 +48,10 @@
#define XLP_IO_SIZE (64 << 20) /* ECFG space size */
#define XLP_IO_PCI_HDRSZ 0x100
#define XLP_IO_DEV(node, dev) ((dev) + (node) * 8)
-#define XLP_HDR_OFFSET(node, bus, dev, fn) (((bus) << 20) | \
- ((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12))
+#define XLP_IO_PCI_OFFSET(b, d, f) (((b) << 20) | ((d) << 15) | ((f) << 12))
+
+#define XLP_HDR_OFFSET(node, bus, dev, fn) \
+ XLP_IO_PCI_OFFSET(bus, XLP_IO_DEV(node, dev), fn)
#define XLP_IO_BRIDGE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 0)
/* coherent inter chip */
@@ -109,6 +111,36 @@
#define XLP_IO_MMC_OFFSET(node, slot) \
((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ)
+/* Things have changed drastically in XLP 9XX */
+#define XLP9XX_HDR_OFFSET(n, d, f) \
+ XLP_IO_PCI_OFFSET(xlp9xx_get_socbus(n), d, f)
+
+#define XLP9XX_IO_BRIDGE_OFFSET(node) XLP_IO_PCI_OFFSET(0, 0, node)
+#define XLP9XX_IO_PIC_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 0)
+#define XLP9XX_IO_UART_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 2)
+#define XLP9XX_IO_SYS_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 0)
+#define XLP9XX_IO_FUSE_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 1)
+#define XLP9XX_IO_JTAG_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 4)
+
+#define XLP9XX_IO_PCIE_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 1, i)
+#define XLP9XX_IO_PCIE0_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 0)
+#define XLP9XX_IO_PCIE2_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 2)
+#define XLP9XX_IO_PCIE3_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 3)
+
+/* XLP9xx USB block */
+#define XLP9XX_IO_USB_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 4, i)
+#define XLP9XX_IO_USB_XHCI0_OFFSET(node) XLP9XX_HDR_OFFSET(node, 4, 1)
+#define XLP9XX_IO_USB_XHCI1_OFFSET(node) XLP9XX_HDR_OFFSET(node, 4, 2)
+
+/* XLP9XX on-chip SATA controller */
+#define XLP9XX_IO_SATA_OFFSET(node) XLP9XX_HDR_OFFSET(node, 3, 2)
+
+#define XLP9XX_IO_NOR_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 0)
+#define XLP9XX_IO_NAND_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 1)
+#define XLP9XX_IO_SPI_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 2)
+/* SD flash */
+#define XLP9XX_IO_MMCSD_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 3)
+
/* PCI config header register id's */
#define XLP_PCI_CFGREG0 0x00
#define XLP_PCI_CFGREG1 0x01
@@ -156,11 +188,23 @@
#define PCI_DEVICE_ID_NLM_MMC 0x1018
#define PCI_DEVICE_ID_NLM_XHCI 0x101d
+#define PCI_DEVICE_ID_XLP9XX_SATA 0x901A
+#define PCI_DEVICE_ID_XLP9XX_XHCI 0x901D
+
#ifndef __ASSEMBLY__
#define nlm_read_pci_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_pci_reg(b, r, v) nlm_write_reg(b, r, v)
+static inline int xlp9xx_get_socbus(int node)
+{
+ uint64_t socbridge;
+
+ if (node == 0)
+ return 1;
+ socbridge = nlm_pcicfg_base(XLP9XX_IO_BRIDGE_OFFSET(node));
+ return (nlm_read_pci_reg(socbridge, 0x6) >> 8) & 0xff;
+}
#endif /* !__ASSEMBLY */
#endif /* __NLM_HAL_IOMAP_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
index b559cb9..d4deb87 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
@@ -52,25 +52,48 @@
#define PCIE_BYTE_SWAP_MEM_LIM 0x248
#define PCIE_BYTE_SWAP_IO_BASE 0x249
#define PCIE_BYTE_SWAP_IO_LIM 0x24A
+
+#define PCIE_BRIDGE_MSIX_ADDR_BASE 0x24F
+#define PCIE_BRIDGE_MSIX_ADDR_LIMIT 0x250
#define PCIE_MSI_STATUS 0x25A
#define PCIE_MSI_EN 0x25B
+#define PCIE_MSIX_STATUS 0x25D
+#define PCIE_INT_STATUS0 0x25F
+#define PCIE_INT_STATUS1 0x260
#define PCIE_INT_EN0 0x261
+#define PCIE_INT_EN1 0x262
-/* PCIE_MSI_EN */
-#define PCIE_MSI_VECTOR_INT_EN 0xFFFFFFFF
+/* XLP9XX has basic changes */
+#define PCIE_9XX_BYTE_SWAP_MEM_BASE 0x25c
+#define PCIE_9XX_BYTE_SWAP_MEM_LIM 0x25d
+#define PCIE_9XX_BYTE_SWAP_IO_BASE 0x25e
+#define PCIE_9XX_BYTE_SWAP_IO_LIM 0x25f
-/* PCIE_INT_EN0 */
-#define PCIE_MSI_INT_EN (1 << 9)
+/* other */
+#define PCIE_NLINKS 4
+/* MSI addresses */
+#define MSI_ADDR_BASE 0xfffee00000ULL
+#define MSI_ADDR_SZ 0x10000
+#define MSI_LINK_ADDR(n, l) (MSI_ADDR_BASE + \
+ (PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ)
+#define MSIX_ADDR_BASE 0xfffef00000ULL
+#define MSIX_LINK_ADDR(n, l) (MSIX_ADDR_BASE + \
+ (PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ)
#ifndef __ASSEMBLY__
#define nlm_read_pcie_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_pcie_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_pcie_base(node, inst) \
- nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, inst))
-#define nlm_get_pcie_regbase(node, inst) \
- (nlm_get_pcie_base(node, inst) + XLP_IO_PCI_HDRSZ)
+#define nlm_get_pcie_base(node, inst) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_PCIE_OFFSET(node, inst) : XLP_IO_PCIE_OFFSET(node, inst))
-int xlp_pcie_link_irt(int link);
+#ifdef CONFIG_PCI_MSI
+void xlp_init_node_msi_irqs(int node, int link);
+#else
+static inline void xlp_init_node_msi_irqs(int node, int link) {}
+#endif
+
+struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev);
+
#endif
#endif /* __NLM_HAL_PCIBUS_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
index 105389b..f10bf3b 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
@@ -150,12 +150,19 @@
#define PIC_IRT0 0x74
#define PIC_IRT(i) (PIC_IRT0 + ((i) * 2))
-#define TIMER_CYCLES_MAXVAL 0xffffffffffffffffULL
+#define PIC_9XX_PENDING_0 0x6
+#define PIC_9XX_PENDING_1 0x8
+#define PIC_9XX_PENDING_2 0xa
+#define PIC_9XX_PENDING_3 0xc
+
+#define PIC_9XX_IRT0 0x1c0
+#define PIC_9XX_IRT(i) (PIC_9XX_IRT0 + ((i) * 2))
/*
* IRT Map
*/
#define PIC_NUM_IRTS 160
+#define PIC_9XX_NUM_IRTS 256
#define PIC_IRT_WD_0_INDEX 0
#define PIC_IRT_WD_1_INDEX 1
@@ -193,14 +200,9 @@
#define PIC_IRT_PCIE_LINK_INDEX(num) ((num) + PIC_IRT_PCIE_LINK_0_INDEX)
#define PIC_CLOCK_TIMER 7
-#define PIC_IRQ_BASE 8
#if !defined(LOCORE) && !defined(__ASSEMBLY__)
-#define PIC_IRT_FIRST_IRQ (PIC_IRQ_BASE)
-#define PIC_IRT_LAST_IRQ 63
-#define PIC_IRQ_IS_IRT(irq) ((irq) >= PIC_IRT_FIRST_IRQ)
-
/*
* Misc
*/
@@ -210,30 +212,26 @@
#define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r)
#define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
-#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
+#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_PIC_OFFSET(node) : XLP_IO_PIC_OFFSET(node))
#define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ)
/* We use PIC on node 0 as a timer */
#define pic_timer_freq() nlm_get_pic_frequency(0)
/* IRT and h/w interrupt routines */
-static inline int
-nlm_pic_read_irt(uint64_t base, int irt_index)
-{
- return nlm_read_pic_reg(base, PIC_IRT(irt_index));
-}
-
static inline void
-nlm_set_irt_to_cpu(uint64_t base, int irt, int cpu)
+nlm_9xx_pic_write_irt(uint64_t base, int irt_num, int en, int nmi,
+ int sch, int vec, int dt, int db, int cpu)
{
uint64_t val;
- val = nlm_read_pic_reg(base, PIC_IRT(irt));
- /* clear cpuset and mask */
- val &= ~((0x7ull << 16) | 0xffff);
- /* set DB, cpuset and cpumask */
- val |= (1 << 19) | ((cpu >> 4) << 16) | (1 << (cpu & 0xf));
- nlm_write_pic_reg(base, PIC_IRT(irt), val);
+ val = (((uint64_t)en & 0x1) << 22) | ((nmi & 0x1) << 23) |
+ ((0 /*mc*/) << 20) | ((vec & 0x3f) << 24) |
+ ((dt & 0x1) << 21) | (0 /*ptr*/ << 16) |
+ (cpu & 0x3ff);
+
+ nlm_write_pic_reg(base, PIC_9XX_IRT(irt_num), val);
}
static inline void
@@ -254,9 +252,13 @@
nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi,
int sch, int vec, int cpu)
{
- nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1,
- (cpu >> 4), /* thread group */
- 1 << (cpu & 0xf)); /* thread mask */
+ if (cpu_is_xlp9xx())
+ nlm_9xx_pic_write_irt(base, irt_num, en, nmi, sch, vec,
+ 1, 0, cpu);
+ else
+ nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1,
+ (cpu >> 4), /* thread group */
+ 1 << (cpu & 0xf)); /* thread mask */
}
static inline uint64_t
@@ -298,8 +300,13 @@
{
uint64_t reg;
- reg = nlm_read_pic_reg(base, PIC_IRT(irt));
- nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31));
+ if (cpu_is_xlp9xx()) {
+ reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt));
+ nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg | (1 << 22));
+ } else {
+ reg = nlm_read_pic_reg(base, PIC_IRT(irt));
+ nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31));
+ }
}
static inline void
@@ -307,8 +314,15 @@
{
uint64_t reg;
- reg = nlm_read_pic_reg(base, PIC_IRT(irt));
- nlm_write_pic_reg(base, PIC_IRT(irt), reg & ~((uint64_t)1 << 31));
+ if (cpu_is_xlp9xx()) {
+ reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt));
+ reg &= ~((uint64_t)1 << 22);
+ nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg);
+ } else {
+ reg = nlm_read_pic_reg(base, PIC_IRT(irt));
+ reg &= ~((uint64_t)1 << 31);
+ nlm_write_pic_reg(base, PIC_IRT(irt), reg);
+ }
}
static inline void
@@ -316,8 +330,13 @@
{
uint64_t ipi;
- ipi = ((uint64_t)nmi << 31) | (irq << 20);
- ipi |= ((hwt >> 4) << 16) | (1 << (hwt & 0xf)); /* cpuset and mask */
+ if (cpu_is_xlp9xx())
+ ipi = (nmi << 23) | (irq << 24) |
+ (0/*mcm*/ << 20) | (0/*ptr*/ << 16) | hwt;
+ else
+ ipi = ((uint64_t)nmi << 31) | (irq << 20) |
+ ((hwt >> 4) << 16) | (1 << (hwt & 0xf));
+
nlm_write_pic_reg(base, PIC_IPI_CTL, ipi);
}
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
index fcf2833..d9b107f 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
@@ -147,13 +147,29 @@
#define SYS_SYS_PLL_MEM_REQ 0x2a3
#define SYS_PLL_MEM_STAT 0x2a4
+/* Registers changed on 9XX */
+#define SYS_9XX_POWER_ON_RESET_CFG 0x00
+#define SYS_9XX_CHIP_RESET 0x01
+#define SYS_9XX_CPU_RESET 0x02
+#define SYS_9XX_CPU_NONCOHERENT_MODE 0x03
+
+/* XLP 9XX fuse block registers */
+#define FUSE_9XX_DEVCFG6 0xc6
+
#ifndef __ASSEMBLY__
#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
+#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_SYS_OFFSET(node) : XLP_IO_SYS_OFFSET(node))
#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
+/* XLP9XX fuse block */
+#define nlm_get_fuse_pcibase(node) \
+ nlm_pcicfg_base(XLP9XX_IO_FUSE_OFFSET(node))
+#define nlm_get_fuse_regbase(node) \
+ (nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
unsigned int nlm_get_pic_frequency(int node);
#endif
#endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
index 86d16e1..a6c5442 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/uart.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
@@ -94,7 +94,8 @@
#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v)
#define nlm_get_uart_pcibase(node, inst) \
- nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst))
+ nlm_pcicfg_base(cpu_is_xlp9xx() ? XLP9XX_IO_UART_OFFSET(node) : \
+ XLP_IO_UART_OFFSET(node, inst))
#define nlm_get_uart_regbase(node, inst) \
(nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
index 470f209..2b0c959 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
@@ -37,10 +37,9 @@
#define PIC_UART_0_IRQ 17
#define PIC_UART_1_IRQ 18
-#define PIC_PCIE_LINK_0_IRQ 19
-#define PIC_PCIE_LINK_1_IRQ 20
-#define PIC_PCIE_LINK_2_IRQ 21
-#define PIC_PCIE_LINK_3_IRQ 22
+
+#define PIC_PCIE_LINK_LEGACY_IRQ_BASE 19
+#define PIC_PCIE_LINK_LEGACY_IRQ(i) (19 + (i))
#define PIC_EHCI_0_IRQ 23
#define PIC_EHCI_1_IRQ 24
@@ -51,6 +50,8 @@
#define PIC_2XX_XHCI_0_IRQ 23
#define PIC_2XX_XHCI_1_IRQ 24
#define PIC_2XX_XHCI_2_IRQ 25
+#define PIC_9XX_XHCI_0_IRQ 23
+#define PIC_9XX_XHCI_1_IRQ 24
#define PIC_MMC_IRQ 29
#define PIC_I2C_0_IRQ 30
@@ -58,6 +59,23 @@
#define PIC_I2C_2_IRQ 32
#define PIC_I2C_3_IRQ 33
+#define PIC_PCIE_LINK_MSI_IRQ_BASE 44 /* 44 - 47 MSI IRQ */
+#define PIC_PCIE_LINK_MSI_IRQ(i) (44 + (i))
+
+/* MSI-X with second link-level dispatch */
+#define PIC_PCIE_MSIX_IRQ_BASE 48 /* 48 - 51 MSI-X IRQ */
+#define PIC_PCIE_MSIX_IRQ(i) (48 + (i))
+
+#define NLM_MSIX_VEC_BASE 96 /* 96 - 127 - MSIX mapped */
+#define NLM_MSI_VEC_BASE 128 /* 128 -255 - MSI mapped */
+
+#define NLM_PIC_INDIRECT_VEC_BASE 512
+#define NLM_GPIO_VEC_BASE 768
+
+#define PIC_IRQ_BASE 8
+#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE
+#define PIC_IRT_LAST_IRQ 63
+
#ifndef __ASSEMBLY__
/* SMP support functions */
@@ -68,6 +86,9 @@
void nlm_hal_init(void);
int xlp_get_dram_map(int n, uint64_t *dram_map);
+struct pci_dev;
+int xlp_socdev_to_node(const struct pci_dev *dev);
+
/* Device tree related */
void xlp_early_init_devtree(void);
void *xlp_dt_init(void *fdtp);
@@ -76,8 +97,15 @@
{
int chip = read_c0_prid() & 0xff00;
- return chip == PRID_IMP_NETLOGIC_XLP2XX;
+ return chip == PRID_IMP_NETLOGIC_XLP2XX ||
+ chip == PRID_IMP_NETLOGIC_XLP9XX;
}
+static inline int cpu_is_xlp9xx(void)
+{
+ int chip = read_c0_prid() & 0xff00;
+
+ return chip == PRID_IMP_NETLOGIC_XLP9XX;
+}
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_NLM_XLP_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h
index c1667e0..ceb991c 100644
--- a/arch/mips/include/asm/netlogic/xlr/xlr.h
+++ b/arch/mips/include/asm/netlogic/xlr/xlr.h
@@ -35,11 +35,6 @@
#ifndef _ASM_NLM_XLR_H
#define _ASM_NLM_XLR_H
-/* Platform UART functions */
-struct uart_port;
-unsigned int nlm_xlr_uart_in(struct uart_port *, int);
-void nlm_xlr_uart_out(struct uart_port *, int, int);
-
/* SMP helpers */
void xlr_wakeup_secondary_cpus(void);
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h
index 41785dd..8933203 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-board.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@@ -36,6 +36,13 @@
#include <asm/octeon/cvmx-helper.h>
+enum cvmx_helper_board_usb_clock_types {
+ USB_CLOCK_TYPE_REF_12,
+ USB_CLOCK_TYPE_REF_24,
+ USB_CLOCK_TYPE_REF_48,
+ USB_CLOCK_TYPE_CRYSTAL_12,
+};
+
typedef enum {
set_phy_link_flags_autoneg = 0x1,
set_phy_link_flags_flow_control_dont_touch = 0x0 << 1,
@@ -154,4 +161,6 @@
*/
extern int __cvmx_helper_board_hardware_enable(int interface);
+enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void);
+
#endif /* __CVMX_HELPER_BOARD_H__ */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index f6be474..5e08bcc 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -11,6 +11,8 @@
#include <spaces.h>
#include <linux/const.h>
+#include <linux/kernel.h>
+#include <asm/mipsregs.h>
/*
* PAGE_SHIFT determines the page size
@@ -33,6 +35,29 @@
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+/*
+ * This is used for calculating the real page sizes
+ * for FTLB or VTLB + FTLB confugrations.
+ */
+static inline unsigned int page_size_ftlb(unsigned int mmuextdef)
+{
+ switch (mmuextdef) {
+ case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
+ if (PAGE_SIZE == (1 << 30))
+ return 5;
+ if (PAGE_SIZE == (1llu << 32))
+ return 6;
+ if (PAGE_SIZE > (256 << 10))
+ return 7; /* reserved */
+ /* fall through */
+ case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
+ return (PAGE_SHIFT - 10) / 2;
+ default:
+ panic("Invalid FTLB configuration with Conf4_mmuextdef=%d value\n",
+ mmuextdef >> 14);
+ }
+}
+
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
#define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3)
#define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT)
diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h
index 90985b6..c102065 100644
--- a/arch/mips/include/asm/rtlx.h
+++ b/arch/mips/include/asm/rtlx.h
@@ -1,13 +1,18 @@
/*
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*/
-
#ifndef __ASM_RTLX_H_
#define __ASM_RTLX_H_
#include <irq.h>
+#define RTLX_MODULE_NAME "rtlx"
+
#define LX_NODE_BASE 10
#define MIPS_CPU_RTLX_IRQ 0
@@ -15,18 +20,31 @@
#define RTLX_VERSION 2
#define RTLX_xID 0x12345600
#define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_BUFFER_SIZE 2048
#define RTLX_CHANNELS 8
#define RTLX_CHANNEL_STDIO 0
#define RTLX_CHANNEL_DBG 1
#define RTLX_CHANNEL_SYSIO 2
-extern int rtlx_open(int index, int can_sleep);
-extern int rtlx_release(int index);
-extern ssize_t rtlx_read(int index, void __user *buff, size_t count);
-extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
-extern unsigned int rtlx_read_poll(int index, int can_sleep);
-extern unsigned int rtlx_write_poll(int index);
+void rtlx_starting(int vpe);
+void rtlx_stopping(int vpe);
+
+int rtlx_open(int index, int can_sleep);
+int rtlx_release(int index);
+ssize_t rtlx_read(int index, void __user *buff, size_t count);
+ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
+unsigned int rtlx_read_poll(int index, int can_sleep);
+unsigned int rtlx_write_poll(int index);
+
+int __init rtlx_module_init(void);
+void __exit rtlx_module_exit(void);
+
+void _interrupt_sp(void);
+
+extern struct vpe_notifications rtlx_notify;
+extern const struct file_operations rtlx_fops;
+extern void (*aprp_hook)(void);
enum rtlx_state {
RTLX_STATE_UNUSED = 0,
@@ -35,10 +53,15 @@
RTLX_STATE_OPENED
};
-#define RTLX_BUFFER_SIZE 2048
+extern struct chan_waitqueues {
+ wait_queue_head_t rt_queue;
+ wait_queue_head_t lx_queue;
+ atomic_t in_open;
+ struct mutex mutex;
+} channel_wqs[RTLX_CHANNELS];
/* each channel supports read and write.
- linux (vpe0) reads lx_buffer and writes rt_buffer
+ linux (vpe0) reads lx_buffer and writes rt_buffer
SP (vpe1) reads rt_buffer and writes lx_buffer
*/
struct rtlx_channel {
@@ -55,11 +78,11 @@
char *lx_buffer;
};
-struct rtlx_info {
+extern struct rtlx_info {
unsigned long id;
enum rtlx_state state;
+ int ap_int_pending; /* Status of 0 or 1 for CONFIG_MIPS_CMP only */
struct rtlx_channel channel[RTLX_CHANNELS];
-};
-
+} *rtlx;
#endif /* __ASM_RTLX_H_ */
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index eb0af15..278d45a 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -19,11 +19,19 @@
struct task_struct;
-/*
- * switch_to(n) should switch tasks to task nr n, first
- * checking that n isn't the current task, in which case it does nothing.
+/**
+ * resume - resume execution of a task
+ * @prev: The task previously executed.
+ * @next: The task to begin executing.
+ * @next_ti: task_thread_info(next).
+ * @usedfpu: Non-zero if prev's FP context should be saved.
+ *
+ * This function is used whilst scheduling to save the context of prev & load
+ * the context of next. Returns prev.
*/
-extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
+extern asmlinkage struct task_struct *resume(struct task_struct *prev,
+ struct task_struct *next, struct thread_info *next_ti,
+ u32 usedfpu);
extern unsigned int ll_bit;
extern struct task_struct *ll_task;
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index 81c8913..33e8dbf 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -29,7 +29,7 @@
static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
struct task_struct *task, struct pt_regs *regs, unsigned int n)
{
- unsigned long usp = regs->regs[29];
+ unsigned long usp __maybe_unused = regs->regs[29];
switch (n) {
case 0: case 1: case 2: case 3:
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 4f58ef6..24846f9 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -110,11 +110,12 @@
#define TIF_NOHZ 19 /* in adaptive nohz mode */
#define TIF_FIXADE 20 /* Fix address errors in software */
#define TIF_LOGADE 21 /* Log address errors to syslog */
-#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */
+#define TIF_32BIT_REGS 22 /* 32-bit general purpose registers */
#define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */
#define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACEPOINT 26 /* syscall tracepoint instrumentation */
+#define TIF_32BIT_FPREGS 27 /* 32-bit floating point registers */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -131,6 +132,7 @@
#define _TIF_32BIT_ADDR (1<<TIF_32BIT_ADDR)
#define _TIF_FPUBOUND (1<<TIF_FPUBOUND)
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
+#define _TIF_32BIT_FPREGS (1<<TIF_32BIT_FPREGS)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
#define _TIF_WORK_SYSCALL_ENTRY (_TIF_NOHZ | _TIF_SYSCALL_TRACE | \
diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h
index c67842b..4a23493 100644
--- a/arch/mips/include/asm/tlb.h
+++ b/arch/mips/include/asm/tlb.h
@@ -18,6 +18,10 @@
*/
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+#define UNIQUE_ENTRYHI(idx) \
+ ((CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) | \
+ (cpu_has_tlbinv ? MIPS_ENTRYHI_EHINV : 0))
+
#include <asm-generic/tlb.h>
#endif /* __ASM_TLB_H */
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
index 0880fe8..7849f39 100644
--- a/arch/mips/include/asm/vpe.h
+++ b/arch/mips/include/asm/vpe.h
@@ -1,24 +1,95 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*/
-
#ifndef _ASM_VPE_H
#define _ASM_VPE_H
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+
+#define VPE_MODULE_NAME "vpe"
+#define VPE_MODULE_MINOR 1
+
+/* grab the likely amount of memory we will need. */
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+#define P_SIZE (2 * 1024 * 1024)
+#else
+/* add an overhead to the max kmalloc size for non-striped symbols/etc */
+#define P_SIZE (256 * 1024)
+#endif
+
+#define MAX_VPES 16
+#define VPE_PATH_MAX 256
+
+static inline int aprp_cpu_index(void)
+{
+#ifdef CONFIG_MIPS_CMP
+ return setup_max_cpus;
+#else
+ extern int tclimit;
+ return tclimit;
+#endif
+}
+
+enum vpe_state {
+ VPE_STATE_UNUSED = 0,
+ VPE_STATE_INUSE,
+ VPE_STATE_RUNNING
+};
+
+enum tc_state {
+ TC_STATE_UNUSED = 0,
+ TC_STATE_INUSE,
+ TC_STATE_RUNNING,
+ TC_STATE_DYNAMIC
+};
+
+struct vpe {
+ enum vpe_state state;
+
+ /* (device) minor associated with this vpe */
+ int minor;
+
+ /* elfloader stuff */
+ void *load_addr;
+ unsigned long len;
+ char *pbuffer;
+ unsigned long plen;
+ char cwd[VPE_PATH_MAX];
+
+ unsigned long __start;
+
+ /* tc's associated with this vpe */
+ struct list_head tc;
+
+ /* The list of vpe's */
+ struct list_head list;
+
+ /* shared symbol address */
+ void *shared_ptr;
+
+ /* the list of who wants to know when something major happens */
+ struct list_head notify;
+
+ unsigned int ntcs;
+};
+
+struct tc {
+ enum tc_state state;
+ int index;
+
+ struct vpe *pvpe; /* parent VPE */
+ struct list_head tc; /* The list of TC's with this VPE */
+ struct list_head list; /* The global list of tc's */
+};
+
struct vpe_notifications {
void (*start)(int vpe);
void (*stop)(int vpe);
@@ -26,10 +97,34 @@
struct list_head list;
};
+struct vpe_control {
+ spinlock_t vpe_list_lock;
+ struct list_head vpe_list; /* Virtual processing elements */
+ spinlock_t tc_list_lock;
+ struct list_head tc_list; /* Thread contexts */
+};
-extern int vpe_notify(int index, struct vpe_notifications *notify);
+extern unsigned long physical_memsize;
+extern struct vpe_control vpecontrol;
+extern const struct file_operations vpe_fops;
-extern void *vpe_get_shared(int index);
-extern char *vpe_getcwd(int index);
+int vpe_notify(int index, struct vpe_notifications *notify);
+void *vpe_get_shared(int index);
+char *vpe_getcwd(int index);
+
+struct vpe *get_vpe(int minor);
+struct tc *get_tc(int index);
+struct vpe *alloc_vpe(int minor);
+struct tc *alloc_tc(int index);
+void release_vpe(struct vpe *v);
+
+void *alloc_progmem(unsigned long len);
+void release_progmem(void *ptr);
+
+int __weak vpe_run(struct vpe *v);
+void cleanup_tc(struct tc *tc);
+
+int __init vpe_module_init(void);
+void __exit vpe_module_exit(void);
#endif /* _ASM_VPE_H */
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index e5a676e..b39ba25 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -98,8 +98,9 @@
*/
enum cop_op {
mfc_op = 0x00, dmfc_op = 0x01,
- cfc_op = 0x02, mtc_op = 0x04,
- dmtc_op = 0x05, ctc_op = 0x06,
+ cfc_op = 0x02, mfhc_op = 0x03,
+ mtc_op = 0x04, dmtc_op = 0x05,
+ ctc_op = 0x06, mthc_op = 0x07,
bc_op = 0x08, cop_op = 0x10,
copm_op = 0x18
};
@@ -397,8 +398,10 @@
mm_movt1_op = 0xa5,
mm_ftruncw_op = 0xac,
mm_fneg1_op = 0xad,
+ mm_mfhc1_op = 0xc0,
mm_froundl_op = 0xcc,
mm_fcvtd1_op = 0xcd,
+ mm_mthc1_op = 0xe0,
mm_froundw_op = 0xec,
mm_fcvts1_op = 0xed,
};
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 8a5ec0e..c01900e 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -427,6 +427,7 @@
static struct platform_device *jz_platform_devices[] __initdata = {
&jz4740_udc_device,
+ &jz4740_udc_xceiv_device,
&jz4740_mmc_device,
&jz4740_nand_device,
&qi_lb60_keypad,
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index df65677..a447101 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -14,13 +14,14 @@
*/
#include <linux/device.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include <linux/dma-mapping.h>
+#include <linux/usb/musb.h>
+
#include <asm/mach-jz4740/platform.h>
#include <asm/mach-jz4740/base.h>
#include <asm/mach-jz4740/irq.h>
@@ -56,29 +57,35 @@
.resource = jz4740_usb_ohci_resources,
};
-/* UDC (USB gadget controller) */
-static struct resource jz4740_usb_gdt_resources[] = {
- {
- .start = JZ4740_UDC_BASE_ADDR,
- .end = JZ4740_UDC_BASE_ADDR + 0x1000 - 1,
- .flags = IORESOURCE_MEM,
+/* USB Device Controller */
+struct platform_device jz4740_udc_xceiv_device = {
+ .name = "usb_phy_gen_xceiv",
+ .id = 0,
+};
+
+static struct resource jz4740_udc_resources[] = {
+ [0] = {
+ .start = JZ4740_UDC_BASE_ADDR,
+ .end = JZ4740_UDC_BASE_ADDR + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
},
- {
- .start = JZ4740_IRQ_UDC,
- .end = JZ4740_IRQ_UDC,
- .flags = IORESOURCE_IRQ,
+ [1] = {
+ .start = JZ4740_IRQ_UDC,
+ .end = JZ4740_IRQ_UDC,
+ .flags = IORESOURCE_IRQ,
+ .name = "mc",
},
};
struct platform_device jz4740_udc_device = {
- .name = "jz-udc",
- .id = -1,
- .dev = {
- .dma_mask = &jz4740_udc_device.dev.coherent_dma_mask,
+ .name = "musb-jz4740",
+ .id = -1,
+ .dev = {
+ .dma_mask = &jz4740_udc_device.dev.coherent_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
- .num_resources = ARRAY_SIZE(jz4740_usb_gdt_resources),
- .resource = jz4740_usb_gdt_resources,
+ .num_resources = ARRAY_SIZE(jz4740_udc_resources),
+ .resource = jz4740_udc_resources,
};
/* MMC/SD controller */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 1c1b717..26c6175 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
obj-$(CONFIG_SYNC_R4K) += sync-r4k.o
+obj-$(CONFIG_DEBUG_FS) += segment.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
@@ -55,7 +56,11 @@
obj-$(CONFIG_CPU_MIPSR2) += spram.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
+obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
+obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
+obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 202e581..7faf5f2 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -28,6 +28,18 @@
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
/*
+ * In order to be sure that we don't attempt to execute an O32 binary which
+ * requires 64 bit FP (FR=1) on a system which does not support it we refuse
+ * to execute any binary which has bits specified by the following macro set
+ * in its ELF header flags.
+ */
+#ifdef CONFIG_MIPS_O32_FP64_SUPPORT
+# define __MIPS_O32_FP64_MUST_BE_ZERO 0
+#else
+# define __MIPS_O32_FP64_MUST_BE_ZERO EF_MIPS_FP64
+#endif
+
+/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define elf_check_arch(hdr) \
@@ -44,6 +56,8 @@
if (((__h->e_flags & EF_MIPS_ABI) != 0) && \
((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32)) \
__res = 0; \
+ if (__h->e_flags & __MIPS_O32_FP64_MUST_BE_ZERO) \
+ __res = 0; \
\
__res; \
})
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
index bd79c4f..a5bf73d 100644
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -8,11 +8,11 @@
* Reset/NMI/re-entry vectors for BMIPS processors
*/
-#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
+#include <asm/cpu.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
@@ -91,12 +91,18 @@
beqz k0, bmips_smp_entry
#if defined(CONFIG_CPU_BMIPS5000)
+ mfc0 k0, CP0_PRID
+ li k1, PRID_IMP_BMIPS5000
+ andi k0, 0xff00
+ bne k0, k1, 1f
+
/* if we're not on core 0, this must be the SMP boot signal */
li k1, (3 << 25)
mfc0 k0, $22
and k0, k1
bnez k0, bmips_smp_entry
-#endif
+1:
+#endif /* CONFIG_CPU_BMIPS5000 */
#endif /* CONFIG_SMP */
/* nope, it's just a regular NMI */
@@ -139,7 +145,12 @@
xori k0, 0x04
mtc0 k0, CP0_CONFIG
+ mfc0 k0, CP0_PRID
+ andi k0, 0xff00
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+ li k1, PRID_IMP_BMIPS43XX
+ bne k0, k1, 2f
+
/* initialize CPU1's local I-cache */
li k0, 0x80000000
li k1, 0x80010000
@@ -150,14 +161,21 @@
1: cache Index_Store_Tag_I, 0(k0)
addiu k0, 16
bne k0, k1, 1b
-#elif defined(CONFIG_CPU_BMIPS5000)
+
+ b 3f
+2:
+#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
+#if defined(CONFIG_CPU_BMIPS5000)
/* set exception vector base */
+ li k1, PRID_IMP_BMIPS5000
+ bne k0, k1, 3f
+
la k0, ebase
lw k0, 0(k0)
mtc0 k0, $15, 1
BARRIER
-#endif
-
+#endif /* CONFIG_CPU_BMIPS5000 */
+3:
/* jump back to kseg0 in case we need to remap the kseg1 area */
la k0, 1f
jr k0
@@ -221,8 +239,18 @@
LEAF(bmips_enable_xks01)
#if defined(CONFIG_XKS01)
-
+ mfc0 t0, CP0_PRID
+ andi t2, t0, 0xff00
#if defined(CONFIG_CPU_BMIPS4380)
+ li t1, PRID_IMP_BMIPS43XX
+ bne t2, t1, 1f
+
+ andi t0, 0xff
+ addiu t1, t0, -PRID_REV_BMIPS4380_HI
+ bgtz t1, 2f
+ addiu t0, -PRID_REV_BMIPS4380_LO
+ bltz t0, 2f
+
mfc0 t0, $22, 3
li t1, 0x1ff0
li t2, (1 << 12) | (1 << 9)
@@ -231,7 +259,13 @@
or t0, t2
mtc0 t0, $22, 3
BARRIER
-#elif defined(CONFIG_CPU_BMIPS5000)
+ b 2f
+1:
+#endif /* CONFIG_CPU_BMIPS4380 */
+#if defined(CONFIG_CPU_BMIPS5000)
+ li t1, PRID_IMP_BMIPS5000
+ bne t2, t1, 2f
+
mfc0 t0, $22, 5
li t1, 0x01ff
li t2, (1 << 8) | (1 << 5)
@@ -240,12 +274,8 @@
or t0, t2
mtc0 t0, $22, 5
BARRIER
-#else
-
-#error Missing XKS01 setup
-
-#endif
-
+#endif /* CONFIG_CPU_BMIPS5000 */
+2:
#endif /* defined(CONFIG_XKS01) */
jr ra
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c814287..530f832 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -112,7 +112,7 @@
unsigned long tmp, fpu_id;
tmp = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
fpu_id = read_32bit_cp1_register(CP1_REVISION);
write_c0_status(tmp);
return fpu_id;
@@ -163,6 +163,25 @@
static char unknown_isa[] = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
+static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
+{
+ unsigned int config6;
+ /*
+ * Config6 is implementation dependent and it's currently only
+ * used by proAptiv
+ */
+ if (c->cputype == CPU_PROAPTIV) {
+ config6 = read_c0_config6();
+ if (enable)
+ /* Enable FTLB */
+ write_c0_config6(config6 | MIPS_CONF6_FTLBEN);
+ else
+ /* Disable FTLB */
+ write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN);
+ back_to_back_c0_hazard();
+ }
+}
+
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
@@ -170,8 +189,13 @@
config0 = read_c0_config();
- if (((config0 & MIPS_CONF_MT) >> 7) == 1)
+ /*
+ * Look for Standard TLB or Dual VTLB and FTLB
+ */
+ if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
+ (((config0 & MIPS_CONF_MT) >> 7) == 4))
c->options |= MIPS_CPU_TLB;
+
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
case 0:
@@ -226,8 +250,11 @@
c->options |= MIPS_CPU_FPU;
c->options |= MIPS_CPU_32FPR;
}
- if (cpu_has_tlb)
+ if (cpu_has_tlb) {
c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+ c->tlbsizevtlb = c->tlbsize;
+ c->tlbsizeftlbsets = 0;
+ }
return config1 & MIPS_CONF_M;
}
@@ -272,6 +299,8 @@
c->options |= MIPS_CPU_MICROMIPS;
if (config3 & MIPS_CONF3_VZ)
c->ases |= MIPS_ASE_VZ;
+ if (config3 & MIPS_CONF3_SC)
+ c->options |= MIPS_CPU_SEGMENTS;
return config3 & MIPS_CONF_M;
}
@@ -279,12 +308,51 @@
static inline unsigned int decode_config4(struct cpuinfo_mips *c)
{
unsigned int config4;
+ unsigned int newcf4;
+ unsigned int mmuextdef;
+ unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE;
config4 = read_c0_config4();
- if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT
- && cpu_has_tlb)
- c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+ if (cpu_has_tlb) {
+ if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
+ c->options |= MIPS_CPU_TLBINV;
+ mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+ switch (mmuextdef) {
+ case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
+ c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+ c->tlbsizevtlb = c->tlbsize;
+ break;
+ case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
+ c->tlbsizevtlb +=
+ ((config4 & MIPS_CONF4_VTLBSIZEEXT) >>
+ MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40;
+ c->tlbsize = c->tlbsizevtlb;
+ ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
+ /* fall through */
+ case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
+ newcf4 = (config4 & ~ftlb_page) |
+ (page_size_ftlb(mmuextdef) <<
+ MIPS_CONF4_FTLBPAGESIZE_SHIFT);
+ write_c0_config4(newcf4);
+ back_to_back_c0_hazard();
+ config4 = read_c0_config4();
+ if (config4 != newcf4) {
+ pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n",
+ PAGE_SIZE, config4);
+ /* Switch FTLB off */
+ set_ftlb_enable(c, 0);
+ break;
+ }
+ c->tlbsizeftlbsets = 1 <<
+ ((config4 & MIPS_CONF4_FTLBSETS) >>
+ MIPS_CONF4_FTLBSETS_SHIFT);
+ c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >>
+ MIPS_CONF4_FTLBWAYS_SHIFT) + 2;
+ c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets;
+ break;
+ }
+ }
c->kscratch_mask = (config4 >> 16) & 0xff;
@@ -312,6 +380,9 @@
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
+ /* Enable FTLB if present */
+ set_ftlb_enable(c, 1);
+
ok = decode_config0(c); /* Read Config registers. */
BUG_ON(!ok); /* Arch spec violation! */
if (ok)
@@ -675,7 +746,6 @@
static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
- decode_configs(c);
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
@@ -739,8 +809,26 @@
c->cputype = CPU_74K;
__cpu_name[cpu] = "MIPS 1074Kc";
break;
+ case PRID_IMP_INTERAPTIV_UP:
+ c->cputype = CPU_INTERAPTIV;
+ __cpu_name[cpu] = "MIPS interAptiv";
+ break;
+ case PRID_IMP_INTERAPTIV_MP:
+ c->cputype = CPU_INTERAPTIV;
+ __cpu_name[cpu] = "MIPS interAptiv (multi)";
+ break;
+ case PRID_IMP_PROAPTIV_UP:
+ c->cputype = CPU_PROAPTIV;
+ __cpu_name[cpu] = "MIPS proAptiv";
+ break;
+ case PRID_IMP_PROAPTIV_MP:
+ c->cputype = CPU_PROAPTIV;
+ __cpu_name[cpu] = "MIPS proAptiv (multi)";
+ break;
}
+ decode_configs(c);
+
spram_config();
}
@@ -943,6 +1031,7 @@
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_NETLOGIC_XLP2XX:
+ case PRID_IMP_NETLOGIC_XLP9XX:
c->cputype = CPU_XLP;
__cpu_name[cpu] = "Broadcom XLPII";
break;
diff --git a/arch/mips/kernel/crash.c b/arch/mips/kernel/crash.c
index 93aa302..d212646 100644
--- a/arch/mips/kernel/crash.c
+++ b/arch/mips/kernel/crash.c
@@ -5,7 +5,6 @@
#include <linux/bootmem.h>
#include <linux/crash_dump.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/sched.h>
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 47d7583..d84f6a5 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -476,6 +476,7 @@
BUILD_HANDLER ov ov sti silent /* #12 */
BUILD_HANDLER tr tr sti silent /* #13 */
BUILD_HANDLER fpe fpe fpe silent /* #15 */
+ BUILD_HANDLER ftlb ftlb none silent /* #16 */
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
#ifdef CONFIG_HARDWARE_WATCHPOINTS
/*
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index f7991d9..3553243 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -184,6 +184,8 @@
case CPU_24K:
case CPU_34K:
case CPU_1004K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
cpu_wait = r4k_wait;
if (read_c0_config7() & MIPS_CONF7_WII)
cpu_wait = r4k_wait_irqoff;
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 8c58d8a..00d2097 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -65,26 +65,25 @@
cpu_data[n].watch_reg_masks[i]);
seq_printf(m, "]\n");
}
- if (cpu_has_mips_r) {
- seq_printf(m, "isa\t\t\t: mips1");
- if (cpu_has_mips_2)
- seq_printf(m, "%s", " mips2");
- if (cpu_has_mips_3)
- seq_printf(m, "%s", " mips3");
- if (cpu_has_mips_4)
- seq_printf(m, "%s", " mips4");
- if (cpu_has_mips_5)
- seq_printf(m, "%s", " mips5");
- if (cpu_has_mips32r1)
- seq_printf(m, "%s", " mips32r1");
- if (cpu_has_mips32r2)
- seq_printf(m, "%s", " mips32r2");
- if (cpu_has_mips64r1)
- seq_printf(m, "%s", " mips64r1");
- if (cpu_has_mips64r2)
- seq_printf(m, "%s", " mips64r2");
- seq_printf(m, "\n");
- }
+
+ seq_printf(m, "isa\t\t\t: mips1");
+ if (cpu_has_mips_2)
+ seq_printf(m, "%s", " mips2");
+ if (cpu_has_mips_3)
+ seq_printf(m, "%s", " mips3");
+ if (cpu_has_mips_4)
+ seq_printf(m, "%s", " mips4");
+ if (cpu_has_mips_5)
+ seq_printf(m, "%s", " mips5");
+ if (cpu_has_mips32r1)
+ seq_printf(m, "%s", " mips32r1");
+ if (cpu_has_mips32r2)
+ seq_printf(m, "%s", " mips32r2");
+ if (cpu_has_mips64r1)
+ seq_printf(m, "%s", " mips64r1");
+ if (cpu_has_mips64r2)
+ seq_printf(m, "%s", " mips64r2");
+ seq_printf(m, "\n");
seq_printf(m, "ASEs implemented\t:");
if (cpu_has_mips16) seq_printf(m, "%s", " mips16");
@@ -107,7 +106,14 @@
seq_printf(m, "kscratch registers\t: %d\n",
hweight8(cpu_data[n].kscratch_mask));
seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
-
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+ if (cpu_has_mipsmt) {
+ seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
+#if defined(CONFIG_MIPS_MT_SMTC)
+ seq_printf(m, "TC\t\t\t: %d\n", cpu_data[n].tc_id);
+#endif
+ }
+#endif
sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
cpu_has_vce ? "%u" : "not available");
seq_printf(m, fmt, 'D', vced_count);
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ddc7610..6ae540e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -60,15 +60,11 @@
/* New thread loses kernel privileges. */
status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
-#ifdef CONFIG_64BIT
- status |= test_thread_flag(TIF_32BIT_REGS) ? 0 : ST0_FR;
-#endif
status |= KU_USER;
regs->cp0_status = status;
clear_used_math();
clear_fpu_owner();
- if (cpu_has_dsp)
- __init_dsp();
+ init_dsp();
regs->cp0_epc = pc;
regs->regs[29] = sp;
}
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index b52e1d2..7da9b76 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -137,13 +137,13 @@
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
flags = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
write_c0_status(flags);
evpe(vpflags);
} else {
flags = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
write_c0_status(flags);
}
@@ -408,6 +408,7 @@
/* Read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
struct pt_regs *regs;
+ fpureg_t *fregs;
unsigned long tmp = 0;
regs = task_pt_regs(child);
@@ -418,26 +419,28 @@
tmp = regs->regs[addr];
break;
case FPR_BASE ... FPR_BASE + 31:
- if (tsk_used_math(child)) {
- fpureg_t *fregs = get_fpu_regs(child);
+ if (!tsk_used_math(child)) {
+ /* FP not yet used */
+ tmp = -1;
+ break;
+ }
+ fregs = get_fpu_regs(child);
#ifdef CONFIG_32BIT
+ if (test_thread_flag(TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
* registers - unless we're using r2k_switch.S.
*/
if (addr & 1)
- tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32);
+ tmp = fregs[(addr & ~1) - 32] >> 32;
else
- tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff);
-#endif
-#ifdef CONFIG_64BIT
- tmp = fregs[addr - FPR_BASE];
-#endif
- } else {
- tmp = -1; /* FP not yet used */
+ tmp = fregs[addr - 32];
+ break;
}
+#endif
+ tmp = fregs[addr - FPR_BASE];
break;
case PC:
tmp = regs->cp0_epc;
@@ -483,13 +486,13 @@
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
flags = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
evpe(vpflags);
} else {
flags = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
}
@@ -554,22 +557,25 @@
child->thread.fpu.fcr31 = 0;
}
#ifdef CONFIG_32BIT
- /*
- * The odd registers are actually the high order bits
- * of the values stored in the even registers - unless
- * we're using r2k_switch.S.
- */
- if (addr & 1) {
- fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff;
- fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32;
- } else {
- fregs[addr - FPR_BASE] &= ~0xffffffffLL;
- fregs[addr - FPR_BASE] |= data;
+ if (test_thread_flag(TIF_32BIT_FPREGS)) {
+ /*
+ * The odd registers are actually the high
+ * order bits of the values stored in the even
+ * registers - unless we're using r2k_switch.S.
+ */
+ if (addr & 1) {
+ fregs[(addr & ~1) - FPR_BASE] &=
+ 0xffffffff;
+ fregs[(addr & ~1) - FPR_BASE] |=
+ ((u64)data) << 32;
+ } else {
+ fregs[addr - FPR_BASE] &= ~0xffffffffLL;
+ fregs[addr - FPR_BASE] |= data;
+ }
+ break;
}
#endif
-#ifdef CONFIG_64BIT
fregs[addr - FPR_BASE] = data;
-#endif
break;
}
case PC:
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 9486055..b8aa2dd 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -80,6 +80,7 @@
/* Read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
struct pt_regs *regs;
+ fpureg_t *fregs;
unsigned int tmp;
regs = task_pt_regs(child);
@@ -90,21 +91,25 @@
tmp = regs->regs[addr];
break;
case FPR_BASE ... FPR_BASE + 31:
- if (tsk_used_math(child)) {
- fpureg_t *fregs = get_fpu_regs(child);
-
+ if (!tsk_used_math(child)) {
+ /* FP not yet used */
+ tmp = -1;
+ break;
+ }
+ fregs = get_fpu_regs(child);
+ if (test_thread_flag(TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
* registers - unless we're using r2k_switch.S.
*/
if (addr & 1)
- tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32);
+ tmp = fregs[(addr & ~1) - 32] >> 32;
else
- tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff);
- } else {
- tmp = -1; /* FP not yet used */
+ tmp = fregs[addr - 32];
+ break;
}
+ tmp = fregs[addr - FPR_BASE];
break;
case PC:
tmp = regs->cp0_epc;
@@ -147,13 +152,13 @@
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
flags = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
evpe(vpflags);
} else {
flags = read_c0_status();
- __enable_fpu();
+ __enable_fpu(FPU_AS_IS);
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
}
@@ -236,20 +241,24 @@
sizeof(child->thread.fpu));
child->thread.fpu.fcr31 = 0;
}
- /*
- * The odd registers are actually the high order bits
- * of the values stored in the even registers - unless
- * we're using r2k_switch.S.
- */
- if (addr & 1) {
- fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff;
- fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32;
- } else {
- fregs[addr - FPR_BASE] &= ~0xffffffffLL;
- /* Must cast, lest sign extension fill upper
- bits! */
- fregs[addr - FPR_BASE] |= (unsigned int)data;
+ if (test_thread_flag(TIF_32BIT_FPREGS)) {
+ /*
+ * The odd registers are actually the high
+ * order bits of the values stored in the even
+ * registers - unless we're using r2k_switch.S.
+ */
+ if (addr & 1) {
+ fregs[(addr & ~1) - FPR_BASE] &=
+ 0xffffffff;
+ fregs[(addr & ~1) - FPR_BASE] |=
+ ((u64)data) << 32;
+ } else {
+ fregs[addr - FPR_BASE] &= ~0xffffffffLL;
+ fregs[addr - FPR_BASE] |= data;
+ }
+ break;
}
+ fregs[addr - FPR_BASE] = data;
break;
}
case PC:
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 55ffe14..253b2fb 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -35,7 +35,15 @@
LEAF(_save_fp_context)
cfc1 t1, fcr31
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) || defined(CONFIG_MIPS32_R2)
+ .set push
+#ifdef CONFIG_MIPS32_R2
+ .set mips64r2
+ mfc0 t0, CP0_STATUS
+ sll t0, t0, 5
+ bgez t0, 1f # skip storing odd if FR=0
+ nop
+#endif
/* Store the 16 odd double precision registers */
EX sdc1 $f1, SC_FPREGS+8(a0)
EX sdc1 $f3, SC_FPREGS+24(a0)
@@ -53,6 +61,7 @@
EX sdc1 $f27, SC_FPREGS+216(a0)
EX sdc1 $f29, SC_FPREGS+232(a0)
EX sdc1 $f31, SC_FPREGS+248(a0)
+1: .set pop
#endif
/* Store the 16 even double precision registers */
@@ -82,7 +91,31 @@
LEAF(_save_fp_context32)
cfc1 t1, fcr31
- EX sdc1 $f0, SC32_FPREGS+0(a0)
+ mfc0 t0, CP0_STATUS
+ sll t0, t0, 5
+ bgez t0, 1f # skip storing odd if FR=0
+ nop
+
+ /* Store the 16 odd double precision registers */
+ EX sdc1 $f1, SC32_FPREGS+8(a0)
+ EX sdc1 $f3, SC32_FPREGS+24(a0)
+ EX sdc1 $f5, SC32_FPREGS+40(a0)
+ EX sdc1 $f7, SC32_FPREGS+56(a0)
+ EX sdc1 $f9, SC32_FPREGS+72(a0)
+ EX sdc1 $f11, SC32_FPREGS+88(a0)
+ EX sdc1 $f13, SC32_FPREGS+104(a0)
+ EX sdc1 $f15, SC32_FPREGS+120(a0)
+ EX sdc1 $f17, SC32_FPREGS+136(a0)
+ EX sdc1 $f19, SC32_FPREGS+152(a0)
+ EX sdc1 $f21, SC32_FPREGS+168(a0)
+ EX sdc1 $f23, SC32_FPREGS+184(a0)
+ EX sdc1 $f25, SC32_FPREGS+200(a0)
+ EX sdc1 $f27, SC32_FPREGS+216(a0)
+ EX sdc1 $f29, SC32_FPREGS+232(a0)
+ EX sdc1 $f31, SC32_FPREGS+248(a0)
+
+ /* Store the 16 even double precision registers */
+1: EX sdc1 $f0, SC32_FPREGS+0(a0)
EX sdc1 $f2, SC32_FPREGS+16(a0)
EX sdc1 $f4, SC32_FPREGS+32(a0)
EX sdc1 $f6, SC32_FPREGS+48(a0)
@@ -114,7 +147,16 @@
*/
LEAF(_restore_fp_context)
EX lw t0, SC_FPC_CSR(a0)
-#ifdef CONFIG_64BIT
+
+#if defined(CONFIG_64BIT) || defined(CONFIG_MIPS32_R2)
+ .set push
+#ifdef CONFIG_MIPS32_R2
+ .set mips64r2
+ mfc0 t0, CP0_STATUS
+ sll t0, t0, 5
+ bgez t0, 1f # skip loading odd if FR=0
+ nop
+#endif
EX ldc1 $f1, SC_FPREGS+8(a0)
EX ldc1 $f3, SC_FPREGS+24(a0)
EX ldc1 $f5, SC_FPREGS+40(a0)
@@ -131,6 +173,7 @@
EX ldc1 $f27, SC_FPREGS+216(a0)
EX ldc1 $f29, SC_FPREGS+232(a0)
EX ldc1 $f31, SC_FPREGS+248(a0)
+1: .set pop
#endif
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
@@ -157,7 +200,30 @@
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
EX lw t0, SC32_FPC_CSR(a0)
- EX ldc1 $f0, SC32_FPREGS+0(a0)
+
+ mfc0 t0, CP0_STATUS
+ sll t0, t0, 5
+ bgez t0, 1f # skip loading odd if FR=0
+ nop
+
+ EX ldc1 $f1, SC32_FPREGS+8(a0)
+ EX ldc1 $f3, SC32_FPREGS+24(a0)
+ EX ldc1 $f5, SC32_FPREGS+40(a0)
+ EX ldc1 $f7, SC32_FPREGS+56(a0)
+ EX ldc1 $f9, SC32_FPREGS+72(a0)
+ EX ldc1 $f11, SC32_FPREGS+88(a0)
+ EX ldc1 $f13, SC32_FPREGS+104(a0)
+ EX ldc1 $f15, SC32_FPREGS+120(a0)
+ EX ldc1 $f17, SC32_FPREGS+136(a0)
+ EX ldc1 $f19, SC32_FPREGS+152(a0)
+ EX ldc1 $f21, SC32_FPREGS+168(a0)
+ EX ldc1 $f23, SC32_FPREGS+184(a0)
+ EX ldc1 $f25, SC32_FPREGS+200(a0)
+ EX ldc1 $f27, SC32_FPREGS+216(a0)
+ EX ldc1 $f29, SC32_FPREGS+232(a0)
+ EX ldc1 $f31, SC32_FPREGS+248(a0)
+
+1: EX ldc1 $f0, SC32_FPREGS+0(a0)
EX ldc1 $f2, SC32_FPREGS+16(a0)
EX ldc1 $f4, SC32_FPREGS+32(a0)
EX ldc1 $f6, SC32_FPREGS+48(a0)
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 078de5e..cc78dd9 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -123,7 +123,7 @@
* Save a thread's fp context.
*/
LEAF(_save_fp)
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
mfc0 t0, CP0_STATUS
#endif
fpu_save_double a0 t0 t1 # clobbers t1
@@ -134,7 +134,7 @@
* Restore a thread's fp context.
*/
LEAF(_restore_fp)
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
mfc0 t0, CP0_STATUS
#endif
fpu_restore_double a0 t0 t1 # clobbers t1
@@ -228,6 +228,47 @@
mtc1 t1, $f29
mtc1 t1, $f30
mtc1 t1, $f31
+
+#ifdef CONFIG_CPU_MIPS32_R2
+ .set push
+ .set mips64r2
+ sll t0, t0, 5 # is Status.FR set?
+ bgez t0, 1f # no: skip setting upper 32b
+
+ mthc1 t1, $f0
+ mthc1 t1, $f1
+ mthc1 t1, $f2
+ mthc1 t1, $f3
+ mthc1 t1, $f4
+ mthc1 t1, $f5
+ mthc1 t1, $f6
+ mthc1 t1, $f7
+ mthc1 t1, $f8
+ mthc1 t1, $f9
+ mthc1 t1, $f10
+ mthc1 t1, $f11
+ mthc1 t1, $f12
+ mthc1 t1, $f13
+ mthc1 t1, $f14
+ mthc1 t1, $f15
+ mthc1 t1, $f16
+ mthc1 t1, $f17
+ mthc1 t1, $f18
+ mthc1 t1, $f19
+ mthc1 t1, $f20
+ mthc1 t1, $f21
+ mthc1 t1, $f22
+ mthc1 t1, $f23
+ mthc1 t1, $f24
+ mthc1 t1, $f25
+ mthc1 t1, $f26
+ mthc1 t1, $f27
+ mthc1 t1, $f28
+ mthc1 t1, $f29
+ mthc1 t1, $f30
+ mthc1 t1, $f31
+1: .set pop
+#endif /* CONFIG_CPU_MIPS32_R2 */
#else
.set mips3
dmtc1 t1, $f0
diff --git a/arch/mips/kernel/rtlx-cmp.c b/arch/mips/kernel/rtlx-cmp.c
new file mode 100644
index 0000000..56dc696
--- /dev/null
+++ b/arch/mips/kernel/rtlx-cmp.c
@@ -0,0 +1,116 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+
+#include <asm/mips_mt.h>
+#include <asm/vpe.h>
+#include <asm/rtlx.h>
+
+static int major;
+
+static void rtlx_interrupt(void)
+{
+ int i;
+ struct rtlx_info *info;
+ struct rtlx_info **p = vpe_get_shared(aprp_cpu_index());
+
+ if (p == NULL || *p == NULL)
+ return;
+
+ info = *p;
+
+ if (info->ap_int_pending == 1 && smp_processor_id() == 0) {
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ wake_up(&channel_wqs[i].lx_queue);
+ wake_up(&channel_wqs[i].rt_queue);
+ }
+ info->ap_int_pending = 0;
+ }
+}
+
+void _interrupt_sp(void)
+{
+ smp_send_reschedule(aprp_cpu_index());
+}
+
+int __init rtlx_module_init(void)
+{
+ struct device *dev;
+ int i, err;
+
+ if (!cpu_has_mipsmt) {
+ pr_warn("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if (num_possible_cpus() - aprp_cpu_index() < 1) {
+ pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
+ "Pass maxcpus=<n> argument as kernel argument\n");
+
+ return -ENODEV;
+ }
+
+ major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
+ if (major < 0) {
+ pr_err("rtlx_module_init: unable to register device\n");
+ return major;
+ }
+
+ /* initialise the wait queues */
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ init_waitqueue_head(&channel_wqs[i].rt_queue);
+ init_waitqueue_head(&channel_wqs[i].lx_queue);
+ atomic_set(&channel_wqs[i].in_open, 0);
+ mutex_init(&channel_wqs[i].mutex);
+
+ dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+ "%s%d", RTLX_MODULE_NAME, i);
+ if (IS_ERR(dev)) {
+ err = PTR_ERR(dev);
+ goto out_chrdev;
+ }
+ }
+
+ /* set up notifiers */
+ rtlx_notify.start = rtlx_starting;
+ rtlx_notify.stop = rtlx_stopping;
+ vpe_notify(aprp_cpu_index(), &rtlx_notify);
+
+ if (cpu_has_vint) {
+ aprp_hook = rtlx_interrupt;
+ } else {
+ pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+ err = -ENODEV;
+ goto out_class;
+ }
+
+ return 0;
+
+out_class:
+ for (i = 0; i < RTLX_CHANNELS; i++)
+ device_destroy(mt_class, MKDEV(major, i));
+out_chrdev:
+ unregister_chrdev(major, RTLX_MODULE_NAME);
+
+ return err;
+}
+
+void __exit rtlx_module_exit(void)
+{
+ int i;
+
+ for (i = 0; i < RTLX_CHANNELS; i++)
+ device_destroy(mt_class, MKDEV(major, i));
+ unregister_chrdev(major, RTLX_MODULE_NAME);
+}
diff --git a/arch/mips/kernel/rtlx-mt.c b/arch/mips/kernel/rtlx-mt.c
new file mode 100644
index 0000000..91d61ba
--- /dev/null
+++ b/arch/mips/kernel/rtlx-mt.c
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/mips_mt.h>
+#include <asm/vpe.h>
+#include <asm/rtlx.h>
+
+static int major;
+
+static void rtlx_dispatch(void)
+{
+ if (read_c0_cause() & read_c0_status() & C_SW0)
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ);
+}
+
+/*
+ * Interrupt handler may be called before rtlx_init has otherwise had
+ * a chance to run.
+ */
+static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
+{
+ unsigned int vpeflags;
+ unsigned long flags;
+ int i;
+
+ /* Ought not to be strictly necessary for SMTC builds */
+ local_irq_save(flags);
+ vpeflags = dvpe();
+ set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+ irq_enable_hazard();
+ evpe(vpeflags);
+ local_irq_restore(flags);
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ wake_up(&channel_wqs[i].lx_queue);
+ wake_up(&channel_wqs[i].rt_queue);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction rtlx_irq = {
+ .handler = rtlx_interrupt,
+ .name = "RTLX",
+};
+
+static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
+
+void _interrupt_sp(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ dvpe();
+ settc(1);
+ write_vpe_c0_cause(read_vpe_c0_cause() | C_SW0);
+ evpe(EVPE_ENABLE);
+ local_irq_restore(flags);
+}
+
+int __init rtlx_module_init(void)
+{
+ struct device *dev;
+ int i, err;
+
+ if (!cpu_has_mipsmt) {
+ pr_warn("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if (aprp_cpu_index() == 0) {
+ pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
+ "Pass maxtcs=<n> argument as kernel argument\n");
+
+ return -ENODEV;
+ }
+
+ major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
+ if (major < 0) {
+ pr_err("rtlx_module_init: unable to register device\n");
+ return major;
+ }
+
+ /* initialise the wait queues */
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ init_waitqueue_head(&channel_wqs[i].rt_queue);
+ init_waitqueue_head(&channel_wqs[i].lx_queue);
+ atomic_set(&channel_wqs[i].in_open, 0);
+ mutex_init(&channel_wqs[i].mutex);
+
+ dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+ "%s%d", RTLX_MODULE_NAME, i);
+ if (IS_ERR(dev)) {
+ err = PTR_ERR(dev);
+ goto out_chrdev;
+ }
+ }
+
+ /* set up notifiers */
+ rtlx_notify.start = rtlx_starting;
+ rtlx_notify.stop = rtlx_stopping;
+ vpe_notify(aprp_cpu_index(), &rtlx_notify);
+
+ if (cpu_has_vint) {
+ aprp_hook = rtlx_dispatch;
+ } else {
+ pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+ err = -ENODEV;
+ goto out_class;
+ }
+
+ rtlx_irq.dev_id = rtlx;
+ err = setup_irq(rtlx_irq_num, &rtlx_irq);
+ if (err)
+ goto out_class;
+
+ return 0;
+
+out_class:
+ for (i = 0; i < RTLX_CHANNELS; i++)
+ device_destroy(mt_class, MKDEV(major, i));
+out_chrdev:
+ unregister_chrdev(major, RTLX_MODULE_NAME);
+
+ return err;
+}
+
+void __exit rtlx_module_exit(void)
+{
+ int i;
+
+ for (i = 0; i < RTLX_CHANNELS; i++)
+ device_destroy(mt_class, MKDEV(major, i));
+ unregister_chrdev(major, RTLX_MODULE_NAME);
+}
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 2c12ea1..31b1b76 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -1,114 +1,51 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2005, 06 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*/
-
-#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/fs.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/list.h>
-#include <linux/vmalloc.h>
-#include <linux/elf.h>
-#include <linux/seq_file.h>
#include <linux/syscalls.h>
#include <linux/moduleloader.h>
-#include <linux/interrupt.h>
-#include <linux/poll.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
+#include <linux/atomic.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-#include <asm/cacheflush.h>
-#include <linux/atomic.h>
-#include <asm/cpu.h>
#include <asm/processor.h>
-#include <asm/vpe.h>
#include <asm/rtlx.h>
#include <asm/setup.h>
+#include <asm/vpe.h>
-static struct rtlx_info *rtlx;
-static int major;
-static char module_name[] = "rtlx";
-
-static struct chan_waitqueues {
- wait_queue_head_t rt_queue;
- wait_queue_head_t lx_queue;
- atomic_t in_open;
- struct mutex mutex;
-} channel_wqs[RTLX_CHANNELS];
-
-static struct vpe_notifications notify;
static int sp_stopping;
-
-extern void *vpe_get_shared(int index);
-
-static void rtlx_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ);
-}
-
-
-/* Interrupt handler may be called before rtlx_init has otherwise had
- a chance to run.
-*/
-static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
-{
- unsigned int vpeflags;
- unsigned long flags;
- int i;
-
- /* Ought not to be strictly necessary for SMTC builds */
- local_irq_save(flags);
- vpeflags = dvpe();
- set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
- irq_enable_hazard();
- evpe(vpeflags);
- local_irq_restore(flags);
-
- for (i = 0; i < RTLX_CHANNELS; i++) {
- wake_up(&channel_wqs[i].lx_queue);
- wake_up(&channel_wqs[i].rt_queue);
- }
-
- return IRQ_HANDLED;
-}
+struct rtlx_info *rtlx;
+struct chan_waitqueues channel_wqs[RTLX_CHANNELS];
+struct vpe_notifications rtlx_notify;
+void (*aprp_hook)(void) = NULL;
+EXPORT_SYMBOL(aprp_hook);
static void __used dump_rtlx(void)
{
int i;
- printk("id 0x%lx state %d\n", rtlx->id, rtlx->state);
+ pr_info("id 0x%lx state %d\n", rtlx->id, rtlx->state);
for (i = 0; i < RTLX_CHANNELS; i++) {
struct rtlx_channel *chan = &rtlx->channel[i];
- printk(" rt_state %d lx_state %d buffer_size %d\n",
- chan->rt_state, chan->lx_state, chan->buffer_size);
+ pr_info(" rt_state %d lx_state %d buffer_size %d\n",
+ chan->rt_state, chan->lx_state, chan->buffer_size);
- printk(" rt_read %d rt_write %d\n",
- chan->rt_read, chan->rt_write);
+ pr_info(" rt_read %d rt_write %d\n",
+ chan->rt_read, chan->rt_write);
- printk(" lx_read %d lx_write %d\n",
- chan->lx_read, chan->lx_write);
+ pr_info(" lx_read %d lx_write %d\n",
+ chan->lx_read, chan->lx_write);
- printk(" rt_buffer <%s>\n", chan->rt_buffer);
- printk(" lx_buffer <%s>\n", chan->lx_buffer);
+ pr_info(" rt_buffer <%s>\n", chan->rt_buffer);
+ pr_info(" lx_buffer <%s>\n", chan->lx_buffer);
}
}
@@ -116,8 +53,7 @@
static int rtlx_init(struct rtlx_info *rtlxi)
{
if (rtlxi->id != RTLX_ID) {
- printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n",
- rtlxi, rtlxi->id);
+ pr_err("no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
return -ENOEXEC;
}
@@ -127,20 +63,20 @@
}
/* notifications */
-static void starting(int vpe)
+void rtlx_starting(int vpe)
{
int i;
sp_stopping = 0;
/* force a reload of rtlx */
- rtlx=NULL;
+ rtlx = NULL;
/* wake up any sleeping rtlx_open's */
for (i = 0; i < RTLX_CHANNELS; i++)
wake_up_interruptible(&channel_wqs[i].lx_queue);
}
-static void stopping(int vpe)
+void rtlx_stopping(int vpe)
{
int i;
@@ -158,31 +94,30 @@
int ret = 0;
if (index >= RTLX_CHANNELS) {
- printk(KERN_DEBUG "rtlx_open index out of range\n");
+ pr_debug(KERN_DEBUG "rtlx_open index out of range\n");
return -ENOSYS;
}
if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
- printk(KERN_DEBUG "rtlx_open channel %d already opened\n",
- index);
+ pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
ret = -EBUSY;
goto out_fail;
}
if (rtlx == NULL) {
- if( (p = vpe_get_shared(tclimit)) == NULL) {
- if (can_sleep) {
- ret = __wait_event_interruptible(
+ p = vpe_get_shared(aprp_cpu_index());
+ if (p == NULL) {
+ if (can_sleep) {
+ ret = __wait_event_interruptible(
channel_wqs[index].lx_queue,
- (p = vpe_get_shared(tclimit)));
- if (ret)
+ (p = vpe_get_shared(aprp_cpu_index())));
+ if (ret)
+ goto out_fail;
+ } else {
+ pr_debug("No SP program loaded, and device opened with O_NONBLOCK\n");
+ ret = -ENOSYS;
goto out_fail;
- } else {
- printk(KERN_DEBUG "No SP program loaded, and device "
- "opened with O_NONBLOCK\n");
- ret = -ENOSYS;
- goto out_fail;
- }
+ }
}
smp_rmb();
@@ -204,24 +139,24 @@
ret = -ERESTARTSYS;
goto out_fail;
}
- finish_wait(&channel_wqs[index].lx_queue, &wait);
+ finish_wait(&channel_wqs[index].lx_queue,
+ &wait);
} else {
- pr_err(" *vpe_get_shared is NULL. "
- "Has an SP program been loaded?\n");
+ pr_err(" *vpe_get_shared is NULL. Has an SP program been loaded?\n");
ret = -ENOSYS;
goto out_fail;
}
}
if ((unsigned int)*p < KSEG0) {
- printk(KERN_WARNING "vpe_get_shared returned an "
- "invalid pointer maybe an error code %d\n",
- (int)*p);
+ pr_warn("vpe_get_shared returned an invalid pointer maybe an error code %d\n",
+ (int)*p);
ret = -ENOSYS;
goto out_fail;
}
- if ((ret = rtlx_init(*p)) < 0)
+ ret = rtlx_init(*p);
+ if (ret < 0)
goto out_ret;
}
@@ -352,7 +287,7 @@
size_t fl;
if (rtlx == NULL)
- return(-ENOSYS);
+ return -ENOSYS;
rt = &rtlx->channel[index];
@@ -361,8 +296,8 @@
rt_read = rt->rt_read;
/* total number of bytes to copy */
- count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write,
- rt->buffer_size));
+ count = min_t(size_t, count, write_spacefree(rt_read, rt->rt_write,
+ rt->buffer_size));
/* first bit from write pointer to the end of the buffer, or count */
fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
@@ -372,9 +307,8 @@
goto out;
/* if there's any left copy to the beginning of the buffer */
- if (count - fl) {
+ if (count - fl)
failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
- }
out:
count -= failed;
@@ -384,6 +318,8 @@
smp_wmb();
mutex_unlock(&channel_wqs[index].mutex);
+ _interrupt_sp();
+
return count;
}
@@ -398,7 +334,7 @@
return rtlx_release(iminor(inode));
}
-static unsigned int file_poll(struct file *file, poll_table * wait)
+static unsigned int file_poll(struct file *file, poll_table *wait)
{
int minor = iminor(file_inode(file));
unsigned int mask = 0;
@@ -420,21 +356,20 @@
return mask;
}
-static ssize_t file_read(struct file *file, char __user * buffer, size_t count,
- loff_t * ppos)
+static ssize_t file_read(struct file *file, char __user *buffer, size_t count,
+ loff_t *ppos)
{
int minor = iminor(file_inode(file));
/* data available? */
- if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) {
- return 0; // -EAGAIN makes cat whinge
- }
+ if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1))
+ return 0; /* -EAGAIN makes 'cat' whine */
return rtlx_read(minor, buffer, count);
}
-static ssize_t file_write(struct file *file, const char __user * buffer,
- size_t count, loff_t * ppos)
+static ssize_t file_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
int minor = iminor(file_inode(file));
@@ -454,100 +389,16 @@
return rtlx_write(minor, buffer, count);
}
-static const struct file_operations rtlx_fops = {
+const struct file_operations rtlx_fops = {
.owner = THIS_MODULE,
- .open = file_open,
+ .open = file_open,
.release = file_release,
.write = file_write,
- .read = file_read,
- .poll = file_poll,
+ .read = file_read,
+ .poll = file_poll,
.llseek = noop_llseek,
};
-static struct irqaction rtlx_irq = {
- .handler = rtlx_interrupt,
- .name = "RTLX",
-};
-
-static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
-
-static char register_chrdev_failed[] __initdata =
- KERN_ERR "rtlx_module_init: unable to register device\n";
-
-static int __init rtlx_module_init(void)
-{
- struct device *dev;
- int i, err;
-
- if (!cpu_has_mipsmt) {
- printk("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-
- if (tclimit == 0) {
- printk(KERN_WARNING "No TCs reserved for AP/SP, not "
- "initializing RTLX.\nPass maxtcs=<n> argument as kernel "
- "argument\n");
-
- return -ENODEV;
- }
-
- major = register_chrdev(0, module_name, &rtlx_fops);
- if (major < 0) {
- printk(register_chrdev_failed);
- return major;
- }
-
- /* initialise the wait queues */
- for (i = 0; i < RTLX_CHANNELS; i++) {
- init_waitqueue_head(&channel_wqs[i].rt_queue);
- init_waitqueue_head(&channel_wqs[i].lx_queue);
- atomic_set(&channel_wqs[i].in_open, 0);
- mutex_init(&channel_wqs[i].mutex);
-
- dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
- "%s%d", module_name, i);
- if (IS_ERR(dev)) {
- err = PTR_ERR(dev);
- goto out_chrdev;
- }
- }
-
- /* set up notifiers */
- notify.start = starting;
- notify.stop = stopping;
- vpe_notify(tclimit, ¬ify);
-
- if (cpu_has_vint)
- set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
- else {
- pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
- err = -ENODEV;
- goto out_chrdev;
- }
-
- rtlx_irq.dev_id = rtlx;
- setup_irq(rtlx_irq_num, &rtlx_irq);
-
- return 0;
-
-out_chrdev:
- for (i = 0; i < RTLX_CHANNELS; i++)
- device_destroy(mt_class, MKDEV(major, i));
-
- return err;
-}
-
-static void __exit rtlx_module_exit(void)
-{
- int i;
-
- for (i = 0; i < RTLX_CHANNELS; i++)
- device_destroy(mt_class, MKDEV(major, i));
-
- unregister_chrdev(major, module_name);
-}
-
module_init(rtlx_module_init);
module_exit(rtlx_module_exit);
diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c
new file mode 100644
index 0000000..076ead2
--- /dev/null
+++ b/arch/mips/kernel/segment.c
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+static void build_segment_config(char *str, unsigned int cfg)
+{
+ unsigned int am;
+ static const char * const am_str[] = {
+ "UK", "MK", "MSK", "MUSK", "MUSUK", "USK",
+ "RSRVD", "UUSK"};
+
+ /* Segment access mode. */
+ am = (cfg & MIPS_SEGCFG_AM) >> MIPS_SEGCFG_AM_SHIFT;
+ str += sprintf(str, "%-5s", am_str[am]);
+
+ /*
+ * Access modes MK, MSK and MUSK are mapped segments. Therefore
+ * there is no direct physical address mapping.
+ */
+ if ((am == 0) || (am > 3)) {
+ str += sprintf(str, " %03lx",
+ ((cfg & MIPS_SEGCFG_PA) >> MIPS_SEGCFG_PA_SHIFT));
+ str += sprintf(str, " %01ld",
+ ((cfg & MIPS_SEGCFG_C) >> MIPS_SEGCFG_C_SHIFT));
+ } else {
+ str += sprintf(str, " UND");
+ str += sprintf(str, " U");
+ }
+
+ /* Exception configuration. */
+ str += sprintf(str, " %01ld\n",
+ ((cfg & MIPS_SEGCFG_EU) >> MIPS_SEGCFG_EU_SHIFT));
+}
+
+static int show_segments(struct seq_file *m, void *v)
+{
+ unsigned int segcfg;
+ char str[42];
+
+ seq_puts(m, "Segment Virtual Size Access Mode Physical Caching EU\n");
+ seq_puts(m, "------- ------- ---- ----------- -------- ------- --\n");
+
+ segcfg = read_c0_segctl0();
+ build_segment_config(str, segcfg);
+ seq_printf(m, " 0 e0000000 512M %s", str);
+
+ segcfg >>= 16;
+ build_segment_config(str, segcfg);
+ seq_printf(m, " 1 c0000000 512M %s", str);
+
+ segcfg = read_c0_segctl1();
+ build_segment_config(str, segcfg);
+ seq_printf(m, " 2 a0000000 512M %s", str);
+
+ segcfg >>= 16;
+ build_segment_config(str, segcfg);
+ seq_printf(m, " 3 80000000 512M %s", str);
+
+ segcfg = read_c0_segctl2();
+ build_segment_config(str, segcfg);
+ seq_printf(m, " 4 40000000 1G %s", str);
+
+ segcfg >>= 16;
+ build_segment_config(str, segcfg);
+ seq_printf(m, " 5 00000000 1G %s\n", str);
+
+ return 0;
+}
+
+static int segments_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_segments, NULL);
+}
+
+static const struct file_operations segments_fops = {
+ .open = segments_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init segments_info(void)
+{
+ extern struct dentry *mips_debugfs_dir;
+ struct dentry *segments;
+
+ if (cpu_has_segments) {
+ if (!mips_debugfs_dir)
+ return -ENODEV;
+
+ segments = debugfs_create_file("segments", S_IRUGO,
+ mips_debugfs_dir, NULL,
+ &segments_fops);
+ if (!segments)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+device_initcall(segments_info);
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 2f285ab..5199563 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -71,8 +71,9 @@
int err;
while (1) {
lock_fpu_owner();
- own_fpu_inatomic(1);
- err = save_fp_context(sc); /* this might fail */
+ err = own_fpu_inatomic(1);
+ if (!err)
+ err = save_fp_context(sc); /* this might fail */
unlock_fpu_owner();
if (likely(!err))
break;
@@ -91,8 +92,9 @@
int err, tmp __maybe_unused;
while (1) {
lock_fpu_owner();
- own_fpu_inatomic(0);
- err = restore_fp_context(sc); /* this might fail */
+ err = own_fpu_inatomic(0);
+ if (!err)
+ err = restore_fp_context(sc); /* this might fail */
unlock_fpu_owner();
if (likely(!err))
break;
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 1905a41..3d60f77 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -85,8 +85,9 @@
int err;
while (1) {
lock_fpu_owner();
- own_fpu_inatomic(1);
- err = save_fp_context32(sc); /* this might fail */
+ err = own_fpu_inatomic(1);
+ if (!err)
+ err = save_fp_context32(sc); /* this might fail */
unlock_fpu_owner();
if (likely(!err))
break;
@@ -105,8 +106,9 @@
int err, tmp __maybe_unused;
while (1) {
lock_fpu_owner();
- own_fpu_inatomic(0);
- err = restore_fp_context32(sc); /* this might fail */
+ err = own_fpu_inatomic(0);
+ if (!err)
+ err = restore_fp_context32(sc); /* this might fail */
unlock_fpu_owner();
if (likely(!err))
break;
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 2362665..ea4c2dc 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -49,8 +49,10 @@
unsigned long bmips_smp_boot_sp;
unsigned long bmips_smp_boot_gp;
-static void bmips_send_ipi_single(int cpu, unsigned int action);
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
+static void bmips5000_send_ipi_single(int cpu, unsigned int action);
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
/* SW interrupts 0,1 are used for interprocessor signaling */
#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0)
@@ -64,49 +66,58 @@
static void __init bmips_smp_setup(void)
{
int i, cpu = 1, boot_cpu = 0;
-
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
int cpu_hw_intr;
- /* arbitration priority */
- clear_c0_brcm_cmt_ctrl(0x30);
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ /* arbitration priority */
+ clear_c0_brcm_cmt_ctrl(0x30);
- /* NBK and weak order flags */
- set_c0_brcm_config_0(0x30000);
+ /* NBK and weak order flags */
+ set_c0_brcm_config_0(0x30000);
- /* Find out if we are running on TP0 or TP1 */
- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+ /* Find out if we are running on TP0 or TP1 */
+ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
- /*
- * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
- * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
- * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
- */
- if (boot_cpu == 0)
- cpu_hw_intr = 0x02;
- else
- cpu_hw_intr = 0x1d;
+ /*
+ * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
+ * thread
+ * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
+ * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
+ */
+ if (boot_cpu == 0)
+ cpu_hw_intr = 0x02;
+ else
+ cpu_hw_intr = 0x1d;
- change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
+ change_c0_brcm_cmt_intr(0xf8018000,
+ (cpu_hw_intr << 27) | (0x03 << 15));
- /* single core, 2 threads (2 pipelines) */
- max_cpus = 2;
-#elif defined(CONFIG_CPU_BMIPS5000)
- /* enable raceless SW interrupts */
- set_c0_brcm_config(0x03 << 22);
+ /* single core, 2 threads (2 pipelines) */
+ max_cpus = 2;
- /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
- change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
+ break;
+ case CPU_BMIPS5000:
+ /* enable raceless SW interrupts */
+ set_c0_brcm_config(0x03 << 22);
- /* N cores, 2 threads per core */
- max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
+ /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
+ change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
- /* clear any pending SW interrupts */
- for (i = 0; i < max_cpus; i++) {
- write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
- write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
+ /* N cores, 2 threads per core */
+ max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
+
+ /* clear any pending SW interrupts */
+ for (i = 0; i < max_cpus; i++) {
+ write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
+ write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
+ }
+
+ break;
+ default:
+ max_cpus = 1;
}
-#endif
if (!bmips_smp_enabled)
max_cpus = 1;
@@ -134,6 +145,20 @@
*/
static void bmips_prepare_cpus(unsigned int max_cpus)
{
+ irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
+
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
+ break;
+ case CPU_BMIPS5000:
+ bmips_ipi_interrupt = bmips5000_ipi_interrupt;
+ break;
+ default:
+ return;
+ }
+
if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
"smp_ipi0", NULL))
panic("Can't request IPI0 interrupt");
@@ -168,26 +193,39 @@
pr_info("SMP: Booting CPU%d...\n", cpu);
- if (cpumask_test_cpu(cpu, &bmips_booted_mask))
- bmips_send_ipi_single(cpu, 0);
- else {
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
- /* Reset slave TP1 if booting from TP0 */
- if (cpu_logical_map(cpu) == 1)
- set_c0_brcm_cmt_ctrl(0x01);
-#elif defined(CONFIG_CPU_BMIPS5000)
- if (cpu & 0x01)
- write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
- else {
- /*
- * core N thread 0 was already booted; just
- * pulse the NMI line
- */
- bmips_write_zscm_reg(0x210, 0xc0000000);
- udelay(10);
- bmips_write_zscm_reg(0x210, 0x00);
+ if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ bmips43xx_send_ipi_single(cpu, 0);
+ break;
+ case CPU_BMIPS5000:
+ bmips5000_send_ipi_single(cpu, 0);
+ break;
}
-#endif
+ }
+ else {
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ /* Reset slave TP1 if booting from TP0 */
+ if (cpu_logical_map(cpu) == 1)
+ set_c0_brcm_cmt_ctrl(0x01);
+ break;
+ case CPU_BMIPS5000:
+ if (cpu & 0x01)
+ write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
+ else {
+ /*
+ * core N thread 0 was already booted; just
+ * pulse the NMI line
+ */
+ bmips_write_zscm_reg(0x210, 0xc0000000);
+ udelay(10);
+ bmips_write_zscm_reg(0x210, 0x00);
+ }
+ break;
+ }
cpumask_set_cpu(cpu, &bmips_booted_mask);
}
}
@@ -199,26 +237,32 @@
{
/* move NMI vector to kseg0, in case XKS01 is enabled */
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
- void __iomem *cbr = BMIPS_GET_CBR();
+ void __iomem *cbr;
unsigned long old_vec;
unsigned long relo_vector;
int boot_cpu;
- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
- relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
- BMIPS_RELO_VECTOR_CONTROL_1;
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ cbr = BMIPS_GET_CBR();
- old_vec = __raw_readl(cbr + relo_vector);
- __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
+ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+ relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
+ BMIPS_RELO_VECTOR_CONTROL_1;
- clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
-#elif defined(CONFIG_CPU_BMIPS5000)
- write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
- (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
+ old_vec = __raw_readl(cbr + relo_vector);
+ __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
- write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
-#endif
+ clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
+ break;
+ case CPU_BMIPS5000:
+ write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
+ (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
+
+ write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
+ break;
+ }
}
/*
@@ -243,8 +287,6 @@
{
}
-#if defined(CONFIG_CPU_BMIPS5000)
-
/*
* BMIPS5000 raceless IPIs
*
@@ -253,12 +295,12 @@
* IPI1 is used for SMP_CALL_FUNCTION
*/
-static void bmips_send_ipi_single(int cpu, unsigned int action)
+static void bmips5000_send_ipi_single(int cpu, unsigned int action)
{
write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
}
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
{
int action = irq - IPI0_IRQ;
@@ -272,7 +314,14 @@
return IRQ_HANDLED;
}
-#else
+static void bmips5000_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu(i, mask)
+ bmips5000_send_ipi_single(i, action);
+}
/*
* BMIPS43xx racey IPIs
@@ -287,7 +336,7 @@
static DEFINE_SPINLOCK(ipi_lock);
static DEFINE_PER_CPU(int, ipi_action_mask);
-static void bmips_send_ipi_single(int cpu, unsigned int action)
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
{
unsigned long flags;
@@ -298,7 +347,7 @@
spin_unlock_irqrestore(&ipi_lock, flags);
}
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
{
unsigned long flags;
int action, cpu = irq - IPI0_IRQ;
@@ -317,15 +366,13 @@
return IRQ_HANDLED;
}
-#endif /* BMIPS type */
-
-static void bmips_send_ipi_mask(const struct cpumask *mask,
+static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
unsigned int action)
{
unsigned int i;
for_each_cpu(i, mask)
- bmips_send_ipi_single(i, action);
+ bmips43xx_send_ipi_single(i, action);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -381,15 +428,30 @@
#endif /* CONFIG_HOTPLUG_CPU */
-struct plat_smp_ops bmips_smp_ops = {
+struct plat_smp_ops bmips43xx_smp_ops = {
.smp_setup = bmips_smp_setup,
.prepare_cpus = bmips_prepare_cpus,
.boot_secondary = bmips_boot_secondary,
.smp_finish = bmips_smp_finish,
.init_secondary = bmips_init_secondary,
.cpus_done = bmips_cpus_done,
- .send_ipi_single = bmips_send_ipi_single,
- .send_ipi_mask = bmips_send_ipi_mask,
+ .send_ipi_single = bmips43xx_send_ipi_single,
+ .send_ipi_mask = bmips43xx_send_ipi_mask,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = bmips_cpu_disable,
+ .cpu_die = bmips_cpu_die,
+#endif
+};
+
+struct plat_smp_ops bmips5000_smp_ops = {
+ .smp_setup = bmips_smp_setup,
+ .prepare_cpus = bmips_prepare_cpus,
+ .boot_secondary = bmips_boot_secondary,
+ .smp_finish = bmips_smp_finish,
+ .init_secondary = bmips_init_secondary,
+ .cpus_done = bmips_cpus_done,
+ .send_ipi_single = bmips5000_send_ipi_single,
+ .send_ipi_mask = bmips5000_send_ipi_mask,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_disable = bmips_cpu_disable,
.cpu_die = bmips_cpu_die,
@@ -427,43 +489,47 @@
BUG_ON(ebase != CKSEG0);
-#if defined(CONFIG_CPU_BMIPS4350)
- /*
- * BMIPS4350 cannot relocate the normal vectors, but it
- * can relocate the BEV=1 vectors. So CPU1 starts up at
- * the relocated BEV=1, IV=0 general exception vector @
- * 0xa000_0380.
- *
- * set_uncached_handler() is used here because:
- * - CPU1 will run this from uncached space
- * - None of the cacheflush functions are set up yet
- */
- set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
- &bmips_smp_int_vec, 0x80);
- __sync();
- return;
-#elif defined(CONFIG_CPU_BMIPS4380)
- /*
- * 0x8000_0000: reset/NMI (initially in kseg1)
- * 0x8000_0400: normal vectors
- */
- new_ebase = 0x80000400;
- cbr = BMIPS_GET_CBR();
- __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
- __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
-#elif defined(CONFIG_CPU_BMIPS5000)
- /*
- * 0x8000_0000: reset/NMI (initially in kseg1)
- * 0x8000_1000: normal vectors
- */
- new_ebase = 0x80001000;
- write_c0_brcm_bootvec(0xa0088008);
- write_c0_ebase(new_ebase);
- if (max_cpus > 2)
- bmips_write_zscm_reg(0xa0, 0xa008a008);
-#else
- return;
-#endif
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ /*
+ * BMIPS4350 cannot relocate the normal vectors, but it
+ * can relocate the BEV=1 vectors. So CPU1 starts up at
+ * the relocated BEV=1, IV=0 general exception vector @
+ * 0xa000_0380.
+ *
+ * set_uncached_handler() is used here because:
+ * - CPU1 will run this from uncached space
+ * - None of the cacheflush functions are set up yet
+ */
+ set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
+ &bmips_smp_int_vec, 0x80);
+ __sync();
+ return;
+ case CPU_BMIPS4380:
+ /*
+ * 0x8000_0000: reset/NMI (initially in kseg1)
+ * 0x8000_0400: normal vectors
+ */
+ new_ebase = 0x80000400;
+ cbr = BMIPS_GET_CBR();
+ __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
+ __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+ break;
+ case CPU_BMIPS5000:
+ /*
+ * 0x8000_0000: reset/NMI (initially in kseg1)
+ * 0x8000_1000: normal vectors
+ */
+ new_ebase = 0x80001000;
+ write_c0_brcm_bootvec(0xa0088008);
+ write_c0_ebase(new_ebase);
+ if (max_cpus > 2)
+ bmips_write_zscm_reg(0xa0, 0xa008a008);
+ break;
+ default:
+ return;
+ }
+
board_nmi_handler_setup = &bmips_nmi_handler_setup;
ebase = new_ebase;
}
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 5969f1e..1b925d8 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -199,11 +199,14 @@
pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
smp_processor_id(), __func__, max_cpus);
+#ifdef CONFIG_MIPS_MT
/*
* FIXME: some of these options are per-system, some per-core and
* some per-cpu
*/
mips_mt_set_cpuoptions();
+#endif
+
}
struct plat_smp_ops cmp_smp_ops = {
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 57a3f7a..0fb8cef 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -71,6 +71,7 @@
/* Record this as available CPU */
set_cpu_possible(tc, true);
+ set_cpu_present(tc, true);
__cpu_number_map[tc] = ++ncpu;
__cpu_logical_map[ncpu] = tc;
}
@@ -112,12 +113,39 @@
write_tc_c0_tchalt(TCHALT_H);
}
+#ifdef CONFIG_IRQ_GIC
+static void mp_send_ipi_single(int cpu, unsigned int action)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ switch (action) {
+ case SMP_CALL_FUNCTION:
+ gic_send_ipi(plat_ipi_call_int_xlate(cpu));
+ break;
+
+ case SMP_RESCHEDULE_YOURSELF:
+ gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
+ break;
+ }
+
+ local_irq_restore(flags);
+}
+#endif
+
static void vsmp_send_ipi_single(int cpu, unsigned int action)
{
int i;
unsigned long flags;
int vpflags;
+#ifdef CONFIG_IRQ_GIC
+ if (gic_present) {
+ mp_send_ipi_single(cpu, action);
+ return;
+ }
+#endif
local_irq_save(flags);
vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */
diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c
index 93f8681..b242e2c 100644
--- a/arch/mips/kernel/spram.c
+++ b/arch/mips/kernel/spram.c
@@ -8,7 +8,6 @@
*
* Copyright (C) 2007, 2008 MIPS Technologies, Inc.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/stddef.h>
@@ -206,6 +205,8 @@
case CPU_34K:
case CPU_74K:
case CPU_1004K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
config0 = read_c0_config();
/* FIXME: addresses are Malta specific */
if (config0 & (1<<24)) {
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 84536bf..c24ad5f 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -11,7 +11,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/irqflags.h>
#include <linux/cpumask.h>
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index f9c8746..e0b4996 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -78,6 +78,7 @@
extern asmlinkage void handle_ov(void);
extern asmlinkage void handle_tr(void);
extern asmlinkage void handle_fpe(void);
+extern asmlinkage void handle_ftlb(void);
extern asmlinkage void handle_mdmx(void);
extern asmlinkage void handle_watch(void);
extern asmlinkage void handle_mt(void);
@@ -1080,7 +1081,7 @@
unsigned long old_epc, old31;
unsigned int opcode;
unsigned int cpid;
- int status;
+ int status, err;
unsigned long __maybe_unused flags;
prev_state = exception_enter();
@@ -1153,19 +1154,19 @@
case 1:
if (used_math()) /* Using the FPU again. */
- own_fpu(1);
+ err = own_fpu(1);
else { /* First time FPU user. */
- init_fpu();
+ err = init_fpu();
set_used_math();
}
- if (!raw_cpu_has_fpu) {
+ if (!raw_cpu_has_fpu || err) {
int sig;
void __user *fault_addr = NULL;
sig = fpu_emulator_cop1Handler(regs,
¤t->thread.fpu,
0, &fault_addr);
- if (!process_fpemu_return(sig, fault_addr))
+ if (!process_fpemu_return(sig, fault_addr) && !err)
mt_ase_fp_affinity();
}
@@ -1336,6 +1337,8 @@
case CPU_34K:
case CPU_74K:
case CPU_1004K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
{
#define ERRCTL_PE 0x80000000
#define ERRCTL_L2P 0x00800000
@@ -1425,14 +1428,27 @@
printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
reg_val & (1<<30) ? "secondary" : "primary",
reg_val & (1<<31) ? "data" : "insn");
- printk("Error bits: %s%s%s%s%s%s%s\n",
- reg_val & (1<<29) ? "ED " : "",
- reg_val & (1<<28) ? "ET " : "",
- reg_val & (1<<26) ? "EE " : "",
- reg_val & (1<<25) ? "EB " : "",
- reg_val & (1<<24) ? "EI " : "",
- reg_val & (1<<23) ? "E1 " : "",
- reg_val & (1<<22) ? "E0 " : "");
+ if (cpu_has_mips_r2 &&
+ ((current_cpu_data.processor_id && 0xff0000) == PRID_COMP_MIPS)) {
+ pr_err("Error bits: %s%s%s%s%s%s%s%s\n",
+ reg_val & (1<<29) ? "ED " : "",
+ reg_val & (1<<28) ? "ET " : "",
+ reg_val & (1<<27) ? "ES " : "",
+ reg_val & (1<<26) ? "EE " : "",
+ reg_val & (1<<25) ? "EB " : "",
+ reg_val & (1<<24) ? "EI " : "",
+ reg_val & (1<<23) ? "E1 " : "",
+ reg_val & (1<<22) ? "E0 " : "");
+ } else {
+ pr_err("Error bits: %s%s%s%s%s%s%s\n",
+ reg_val & (1<<29) ? "ED " : "",
+ reg_val & (1<<28) ? "ET " : "",
+ reg_val & (1<<26) ? "EE " : "",
+ reg_val & (1<<25) ? "EB " : "",
+ reg_val & (1<<24) ? "EI " : "",
+ reg_val & (1<<23) ? "E1 " : "",
+ reg_val & (1<<22) ? "E0 " : "");
+ }
printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
@@ -1446,6 +1462,34 @@
panic("Can't handle the cache error!");
}
+asmlinkage void do_ftlb(void)
+{
+ const int field = 2 * sizeof(unsigned long);
+ unsigned int reg_val;
+
+ /* For the moment, report the problem and hang. */
+ if (cpu_has_mips_r2 &&
+ ((current_cpu_data.processor_id && 0xff0000) == PRID_COMP_MIPS)) {
+ pr_err("FTLB error exception, cp0_ecc=0x%08x:\n",
+ read_c0_ecc());
+ pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
+ reg_val = read_c0_cacheerr();
+ pr_err("c0_cacheerr == %08x\n", reg_val);
+
+ if ((reg_val & 0xc0000000) == 0xc0000000) {
+ pr_err("Decoded c0_cacheerr: FTLB parity error\n");
+ } else {
+ pr_err("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
+ reg_val & (1<<30) ? "secondary" : "primary",
+ reg_val & (1<<31) ? "data" : "insn");
+ }
+ } else {
+ pr_err("FTLB error exception\n");
+ }
+ /* Just print the cacheerr bits for now */
+ cache_parity_error();
+}
+
/*
* SDBBP EJTAG debug exception handler.
* We skip the instruction and return to the next instruction.
@@ -1995,6 +2039,7 @@
if (cpu_has_fpu && !cpu_has_nofpuex)
set_except_vector(15, handle_fpe);
+ set_except_vector(16, handle_ftlb);
set_except_vector(22, handle_mdmx);
if (cpu_has_mcheck)
diff --git a/arch/mips/kernel/vpe-cmp.c b/arch/mips/kernel/vpe-cmp.c
new file mode 100644
index 0000000..9268ebc
--- /dev/null
+++ b/arch/mips/kernel/vpe-cmp.c
@@ -0,0 +1,180 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/vpe.h>
+
+static int major;
+
+void cleanup_tc(struct tc *tc)
+{
+
+}
+
+static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct vpe *vpe = get_vpe(aprp_cpu_index());
+ struct vpe_notifications *notifier;
+
+ list_for_each_entry(notifier, &vpe->notify, list)
+ notifier->stop(aprp_cpu_index());
+
+ release_progmem(vpe->load_addr);
+ vpe->state = VPE_STATE_UNUSED;
+
+ return len;
+}
+static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
+
+static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
+ char *buf)
+{
+ struct vpe *vpe = get_vpe(aprp_cpu_index());
+
+ return sprintf(buf, "%d\n", vpe->ntcs);
+}
+
+static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct vpe *vpe = get_vpe(aprp_cpu_index());
+ unsigned long new;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &new);
+ if (ret < 0)
+ return ret;
+
+ /* APRP can only reserve one TC in a VPE and no more. */
+ if (new != 1)
+ return -EINVAL;
+
+ vpe->ntcs = new;
+
+ return len;
+}
+static DEVICE_ATTR_RW(ntcs);
+
+static struct attribute *vpe_attrs[] = {
+ &dev_attr_kill.attr,
+ &dev_attr_ntcs.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(vpe);
+
+static void vpe_device_release(struct device *cd)
+{
+ kfree(cd);
+}
+
+static struct class vpe_class = {
+ .name = "vpe",
+ .owner = THIS_MODULE,
+ .dev_release = vpe_device_release,
+ .dev_groups = vpe_groups,
+};
+
+static struct device vpe_device;
+
+int __init vpe_module_init(void)
+{
+ struct vpe *v = NULL;
+ struct tc *t;
+ int err;
+
+ if (!cpu_has_mipsmt) {
+ pr_warn("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if (num_possible_cpus() - aprp_cpu_index() < 1) {
+ pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
+ "Pass maxcpus=<n> argument as kernel argument\n");
+ return -ENODEV;
+ }
+
+ major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
+ if (major < 0) {
+ pr_warn("VPE loader: unable to register character device\n");
+ return major;
+ }
+
+ err = class_register(&vpe_class);
+ if (err) {
+ pr_err("vpe_class registration failed\n");
+ goto out_chrdev;
+ }
+
+ device_initialize(&vpe_device);
+ vpe_device.class = &vpe_class,
+ vpe_device.parent = NULL,
+ dev_set_name(&vpe_device, "vpe_sp");
+ vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
+ err = device_add(&vpe_device);
+ if (err) {
+ pr_err("Adding vpe_device failed\n");
+ goto out_class;
+ }
+
+ t = alloc_tc(aprp_cpu_index());
+ if (!t) {
+ pr_warn("VPE: unable to allocate TC\n");
+ err = -ENOMEM;
+ goto out_dev;
+ }
+
+ /* VPE */
+ v = alloc_vpe(aprp_cpu_index());
+ if (v == NULL) {
+ pr_warn("VPE: unable to allocate VPE\n");
+ kfree(t);
+ err = -ENOMEM;
+ goto out_dev;
+ }
+
+ v->ntcs = 1;
+
+ /* add the tc to the list of this vpe's tc's. */
+ list_add(&t->tc, &v->tc);
+
+ /* TC */
+ t->pvpe = v; /* set the parent vpe */
+
+ return 0;
+
+out_dev:
+ device_del(&vpe_device);
+
+out_class:
+ class_unregister(&vpe_class);
+
+out_chrdev:
+ unregister_chrdev(major, VPE_MODULE_NAME);
+
+ return err;
+}
+
+void __exit vpe_module_exit(void)
+{
+ struct vpe *v, *n;
+
+ device_del(&vpe_device);
+ class_unregister(&vpe_class);
+ unregister_chrdev(major, VPE_MODULE_NAME);
+
+ /* No locking needed here */
+ list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list)
+ if (v->state != VPE_STATE_UNUSED)
+ release_vpe(v);
+}
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
new file mode 100644
index 0000000..949ae0e
--- /dev/null
+++ b/arch/mips/kernel/vpe-mt.c
@@ -0,0 +1,523 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/mips_mt.h>
+#include <asm/vpe.h>
+
+static int major;
+
+/* The number of TCs and VPEs physically available on the core */
+static int hw_tcs, hw_vpes;
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(struct vpe *v)
+{
+ unsigned long flags, val, dmt_flag;
+ struct vpe_notifications *notifier;
+ unsigned int vpeflags;
+ struct tc *t;
+
+ /* check we are the Master VPE */
+ local_irq_save(flags);
+ val = read_c0_vpeconf0();
+ if (!(val & VPECONF0_MVP)) {
+ pr_warn("VPE loader: only Master VPE's are able to config MT\n");
+ local_irq_restore(flags);
+
+ return -1;
+ }
+
+ dmt_flag = dmt();
+ vpeflags = dvpe();
+
+ if (list_empty(&v->tc)) {
+ evpe(vpeflags);
+ emt(dmt_flag);
+ local_irq_restore(flags);
+
+ pr_warn("VPE loader: No TC's associated with VPE %d\n",
+ v->minor);
+
+ return -ENOEXEC;
+ }
+
+ t = list_first_entry(&v->tc, struct tc, tc);
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(t->index);
+
+ /* should check it is halted, and not activated */
+ if ((read_tc_c0_tcstatus() & TCSTATUS_A) ||
+ !(read_tc_c0_tchalt() & TCHALT_H)) {
+ evpe(vpeflags);
+ emt(dmt_flag);
+ local_irq_restore(flags);
+
+ pr_warn("VPE loader: TC %d is already active!\n",
+ t->index);
+
+ return -ENOEXEC;
+ }
+
+ /*
+ * Write the address we want it to start running from in the TCPC
+ * register.
+ */
+ write_tc_c0_tcrestart((unsigned long)v->__start);
+ write_tc_c0_tccontext((unsigned long)0);
+
+ /*
+ * Mark the TC as activated, not interrupt exempt and not dynamically
+ * allocatable
+ */
+ val = read_tc_c0_tcstatus();
+ val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+ write_tc_c0_tcstatus(val);
+
+ write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+ /*
+ * The sde-kit passes 'memsize' to __start in $a3, so set something
+ * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
+ * DFLT_HEAP_SIZE when you compile your program
+ */
+ mttgpr(6, v->ntcs);
+ mttgpr(7, physical_memsize);
+
+ /* set up VPE1 */
+ /*
+ * bind the TC to VPE 1 as late as possible so we only have the final
+ * VPE registers to set up, and so an EJTAG probe can trigger on it
+ */
+ write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
+
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
+
+ back_to_back_c0_hazard();
+
+ /* Set up the XTC bit in vpeconf0 to point at our tc */
+ write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
+ | (t->index << VPECONF0_XTC_SHIFT));
+
+ back_to_back_c0_hazard();
+
+ /* enable this VPE */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+ /* clear out any left overs from a previous program */
+ write_vpe_c0_status(0);
+ write_vpe_c0_cause(0);
+
+ /* take system out of configuration state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /*
+ * SMTC/SMVP kernels manage VPE enable independently,
+ * but uniprocessor kernels need to turn it on, even
+ * if that wasn't the pre-dvpe() state.
+ */
+#ifdef CONFIG_SMP
+ evpe(vpeflags);
+#else
+ evpe(EVPE_ENABLE);
+#endif
+ emt(dmt_flag);
+ local_irq_restore(flags);
+
+ list_for_each_entry(notifier, &v->notify, list)
+ notifier->start(VPE_MODULE_MINOR);
+
+ return 0;
+}
+
+void cleanup_tc(struct tc *tc)
+{
+ unsigned long flags;
+ unsigned int mtflags, vpflags;
+ int tmp;
+
+ local_irq_save(flags);
+ mtflags = dmt();
+ vpflags = dvpe();
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(tc->index);
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
+}
+
+/* module wrapper entry points */
+/* give me a vpe */
+void *vpe_alloc(void)
+{
+ int i;
+ struct vpe *v;
+
+ /* find a vpe */
+ for (i = 1; i < MAX_VPES; i++) {
+ v = get_vpe(i);
+ if (v != NULL) {
+ v->state = VPE_STATE_INUSE;
+ return v;
+ }
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(void *vpe, unsigned long start)
+{
+ struct vpe *v = vpe;
+
+ v->__start = start;
+ return vpe_run(v);
+}
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(void *vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ evpe_flags = dvpe();
+
+ t = list_entry(v->tc.next, struct tc, tc);
+ if (t != NULL) {
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+ }
+
+ evpe(evpe_flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(void *vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ t = list_entry(v->tc.next, struct tc, tc);
+ if (t == NULL)
+ return -ENOEXEC;
+
+ evpe_flags = dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+ /* halt the TC */
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+
+ /* mark the TC unallocated */
+ write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+
+ v->state = VPE_STATE_UNUSED;
+
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(evpe_flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(vpe_free);
+
+static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct vpe *vpe = get_vpe(aprp_cpu_index());
+ struct vpe_notifications *notifier;
+
+ list_for_each_entry(notifier, &vpe->notify, list)
+ notifier->stop(aprp_cpu_index());
+
+ release_progmem(vpe->load_addr);
+ cleanup_tc(get_tc(aprp_cpu_index()));
+ vpe_stop(vpe);
+ vpe_free(vpe);
+
+ return len;
+}
+static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
+
+static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
+ char *buf)
+{
+ struct vpe *vpe = get_vpe(aprp_cpu_index());
+
+ return sprintf(buf, "%d\n", vpe->ntcs);
+}
+
+static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct vpe *vpe = get_vpe(aprp_cpu_index());
+ unsigned long new;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &new);
+ if (ret < 0)
+ return ret;
+
+ if (new == 0 || new > (hw_tcs - aprp_cpu_index()))
+ return -EINVAL;
+
+ vpe->ntcs = new;
+
+ return len;
+}
+static DEVICE_ATTR_RW(ntcs);
+
+static struct attribute *vpe_attrs[] = {
+ &dev_attr_kill.attr,
+ &dev_attr_ntcs.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(vpe);
+
+static void vpe_device_release(struct device *cd)
+{
+ kfree(cd);
+}
+
+static struct class vpe_class = {
+ .name = "vpe",
+ .owner = THIS_MODULE,
+ .dev_release = vpe_device_release,
+ .dev_groups = vpe_groups,
+};
+
+static struct device vpe_device;
+
+int __init vpe_module_init(void)
+{
+ unsigned int mtflags, vpflags;
+ unsigned long flags, val;
+ struct vpe *v = NULL;
+ struct tc *t;
+ int tc, err;
+
+ if (!cpu_has_mipsmt) {
+ pr_warn("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if (vpelimit == 0) {
+ pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
+ "Pass maxvpes=<n> argument as kernel argument\n");
+
+ return -ENODEV;
+ }
+
+ if (aprp_cpu_index() == 0) {
+ pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n"
+ "Pass maxtcs=<n> argument as kernel argument\n");
+
+ return -ENODEV;
+ }
+
+ major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
+ if (major < 0) {
+ pr_warn("VPE loader: unable to register character device\n");
+ return major;
+ }
+
+ err = class_register(&vpe_class);
+ if (err) {
+ pr_err("vpe_class registration failed\n");
+ goto out_chrdev;
+ }
+
+ device_initialize(&vpe_device);
+ vpe_device.class = &vpe_class,
+ vpe_device.parent = NULL,
+ dev_set_name(&vpe_device, "vpe1");
+ vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
+ err = device_add(&vpe_device);
+ if (err) {
+ pr_err("Adding vpe_device failed\n");
+ goto out_class;
+ }
+
+ local_irq_save(flags);
+ mtflags = dmt();
+ vpflags = dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ val = read_c0_mvpconf0();
+ hw_tcs = (val & MVPCONF0_PTC) + 1;
+ hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+ for (tc = aprp_cpu_index(); tc < hw_tcs; tc++) {
+ /*
+ * Must re-enable multithreading temporarily or in case we
+ * reschedule send IPIs or similar we might hang.
+ */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
+ t = alloc_tc(tc);
+ if (!t) {
+ err = -ENOMEM;
+ goto out_dev;
+ }
+
+ local_irq_save(flags);
+ mtflags = dmt();
+ vpflags = dvpe();
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* VPE's */
+ if (tc < hw_tcs) {
+ settc(tc);
+
+ v = alloc_vpe(tc);
+ if (v == NULL) {
+ pr_warn("VPE: unable to allocate VPE\n");
+ goto out_reenable;
+ }
+
+ v->ntcs = hw_tcs - aprp_cpu_index();
+
+ /* add the tc to the list of this vpe's tc's. */
+ list_add(&t->tc, &v->tc);
+
+ /* deactivate all but vpe0 */
+ if (tc >= aprp_cpu_index()) {
+ unsigned long tmp = read_vpe_c0_vpeconf0();
+
+ tmp &= ~VPECONF0_VPA;
+
+ /* master VPE */
+ tmp |= VPECONF0_MVP;
+ write_vpe_c0_vpeconf0(tmp);
+ }
+
+ /* disable multi-threading with TC's */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() &
+ ~VPECONTROL_TE);
+
+ if (tc >= vpelimit) {
+ /*
+ * Set config to be the same as vpe0,
+ * particularly kseg0 coherency alg
+ */
+ write_vpe_c0_config(read_c0_config());
+ }
+ }
+
+ /* TC's */
+ t->pvpe = v; /* set the parent vpe */
+
+ if (tc >= aprp_cpu_index()) {
+ unsigned long tmp;
+
+ settc(tc);
+
+ /* Any TC that is bound to VPE0 gets left as is - in
+ * case we are running SMTC on VPE0. A TC that is bound
+ * to any other VPE gets bound to VPE0, ideally I'd like
+ * to make it homeless but it doesn't appear to let me
+ * bind a TC to a non-existent VPE. Which is perfectly
+ * reasonable.
+ *
+ * The (un)bound state is visible to an EJTAG probe so
+ * may notify GDB...
+ */
+ tmp = read_tc_c0_tcbind();
+ if (tmp & TCBIND_CURVPE) {
+ /* tc is bound >vpe0 */
+ write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
+
+ t->pvpe = get_vpe(0); /* set the parent vpe */
+ }
+
+ /* halt the TC */
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not activated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+ }
+ }
+
+out_reenable:
+ /* release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
+
+ return 0;
+
+out_dev:
+ device_del(&vpe_device);
+
+out_class:
+ class_unregister(&vpe_class);
+
+out_chrdev:
+ unregister_chrdev(major, VPE_MODULE_NAME);
+
+ return err;
+}
+
+void __exit vpe_module_exit(void)
+{
+ struct vpe *v, *n;
+
+ device_del(&vpe_device);
+ class_unregister(&vpe_class);
+ unregister_chrdev(major, VPE_MODULE_NAME);
+
+ /* No locking needed here */
+ list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+ if (v->state != VPE_STATE_UNUSED)
+ release_vpe(v);
+ }
+}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 2d5c142..11da314 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1,37 +1,22 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-/*
- * VPE support module
- *
- * Provides support for loading a MIPS SP program on VPE1.
- * The SP environment is rather simple, no tlb's. It needs to be relocatable
- * (or partially linked). You should initialise your stack in the startup
- * code. This loader looks for the symbol __start and sets up
- * execution to resume from there. The MIPS SDE kit contains suitable examples.
- *
- * To load and run, simply cat a SP 'program file' to /dev/vpe1.
- * i.e cat spapp >/dev/vpe1.
+ * VPE spport module for loading a MIPS SP program into VPE1. The SP
+ * environment is rather simple since there are no TLBs. It needs
+ * to be relocatable (or partiall linked). Initialize your stack in
+ * the startup-code. The loader looks for the symbol __start and sets
+ * up the execution to resume from there. To load and run, simply do
+ * a cat SP 'binary' to the /dev/vpe1 device.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
@@ -46,13 +31,10 @@
#include <asm/mipsmtregs.h>
#include <asm/cacheflush.h>
#include <linux/atomic.h>
-#include <asm/cpu.h>
#include <asm/mips_mt.h>
#include <asm/processor.h>
#include <asm/vpe.h>
-typedef void *vpe_handle;
-
#ifndef ARCH_SHF_SMALL
#define ARCH_SHF_SMALL 0
#endif
@@ -60,95 +42,15 @@
/* If this is set, the section belongs in the init part of the module */
#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
-/*
- * The number of TCs and VPEs physically available on the core
- */
-static int hw_tcs, hw_vpes;
-static char module_name[] = "vpe";
-static int major;
-static const int minor = 1; /* fixed for now */
-
-/* grab the likely amount of memory we will need. */
-#ifdef CONFIG_MIPS_VPE_LOADER_TOM
-#define P_SIZE (2 * 1024 * 1024)
-#else
-/* add an overhead to the max kmalloc size for non-striped symbols/etc */
-#define P_SIZE (256 * 1024)
-#endif
-
-extern unsigned long physical_memsize;
-
-#define MAX_VPES 16
-#define VPE_PATH_MAX 256
-
-enum vpe_state {
- VPE_STATE_UNUSED = 0,
- VPE_STATE_INUSE,
- VPE_STATE_RUNNING
-};
-
-enum tc_state {
- TC_STATE_UNUSED = 0,
- TC_STATE_INUSE,
- TC_STATE_RUNNING,
- TC_STATE_DYNAMIC
-};
-
-struct vpe {
- enum vpe_state state;
-
- /* (device) minor associated with this vpe */
- int minor;
-
- /* elfloader stuff */
- void *load_addr;
- unsigned long len;
- char *pbuffer;
- unsigned long plen;
- char cwd[VPE_PATH_MAX];
-
- unsigned long __start;
-
- /* tc's associated with this vpe */
- struct list_head tc;
-
- /* The list of vpe's */
- struct list_head list;
-
- /* shared symbol address */
- void *shared_ptr;
-
- /* the list of who wants to know when something major happens */
- struct list_head notify;
-
- unsigned int ntcs;
-};
-
-struct tc {
- enum tc_state state;
- int index;
-
- struct vpe *pvpe; /* parent VPE */
- struct list_head tc; /* The list of TC's with this VPE */
- struct list_head list; /* The global list of tc's */
-};
-
-struct {
- spinlock_t vpe_list_lock;
- struct list_head vpe_list; /* Virtual processing elements */
- spinlock_t tc_list_lock;
- struct list_head tc_list; /* Thread contexts */
-} vpecontrol = {
+struct vpe_control vpecontrol = {
.vpe_list_lock = __SPIN_LOCK_UNLOCKED(vpe_list_lock),
.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
.tc_list_lock = __SPIN_LOCK_UNLOCKED(tc_list_lock),
.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
};
-static void release_progmem(void *ptr);
-
/* get the vpe associated with this minor */
-static struct vpe *get_vpe(int minor)
+struct vpe *get_vpe(int minor)
{
struct vpe *res, *v;
@@ -158,7 +60,7 @@
res = NULL;
spin_lock(&vpecontrol.vpe_list_lock);
list_for_each_entry(v, &vpecontrol.vpe_list, list) {
- if (v->minor == minor) {
+ if (v->minor == VPE_MODULE_MINOR) {
res = v;
break;
}
@@ -169,7 +71,7 @@
}
/* get the vpe associated with this minor */
-static struct tc *get_tc(int index)
+struct tc *get_tc(int index)
{
struct tc *res, *t;
@@ -187,12 +89,13 @@
}
/* allocate a vpe and associate it with this minor (or index) */
-static struct vpe *alloc_vpe(int minor)
+struct vpe *alloc_vpe(int minor)
{
struct vpe *v;
- if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
- return NULL;
+ v = kzalloc(sizeof(struct vpe), GFP_KERNEL);
+ if (v == NULL)
+ goto out;
INIT_LIST_HEAD(&v->tc);
spin_lock(&vpecontrol.vpe_list_lock);
@@ -200,17 +103,19 @@
spin_unlock(&vpecontrol.vpe_list_lock);
INIT_LIST_HEAD(&v->notify);
- v->minor = minor;
+ v->minor = VPE_MODULE_MINOR;
+out:
return v;
}
/* allocate a tc. At startup only tc0 is running, all other can be halted. */
-static struct tc *alloc_tc(int index)
+struct tc *alloc_tc(int index)
{
struct tc *tc;
- if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
+ tc = kzalloc(sizeof(struct tc), GFP_KERNEL);
+ if (tc == NULL)
goto out;
INIT_LIST_HEAD(&tc->tc);
@@ -225,7 +130,7 @@
}
/* clean up and free everything */
-static void release_vpe(struct vpe *v)
+void release_vpe(struct vpe *v)
{
list_del(&v->list);
if (v->load_addr)
@@ -233,28 +138,8 @@
kfree(v);
}
-static void __maybe_unused dump_mtregs(void)
-{
- unsigned long val;
-
- val = read_c0_config3();
- printk("config3 0x%lx MT %ld\n", val,
- (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
-
- val = read_c0_mvpcontrol();
- printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
- (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
- (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
- (val & MVPCONTROL_EVP));
-
- val = read_c0_mvpconf0();
- printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
- (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
- val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
-}
-
-/* Find some VPE program space */
-static void *alloc_progmem(unsigned long len)
+/* Find some VPE program space */
+void *alloc_progmem(unsigned long len)
{
void *addr;
@@ -273,7 +158,7 @@
return addr;
}
-static void release_progmem(void *ptr)
+void release_progmem(void *ptr)
{
#ifndef CONFIG_MIPS_VPE_LOADER_TOM
kfree(ptr);
@@ -281,7 +166,7 @@
}
/* Update size with this section: return offset. */
-static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
+static long get_offset(unsigned long *size, Elf_Shdr *sechdr)
{
long ret;
@@ -294,8 +179,8 @@
might -- code, read-only data, read-write data, small data. Tally
sizes, and place the offsets into sh_entsize fields: high bit means it
belongs in init. */
-static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
- Elf_Shdr * sechdrs, const char *secstrings)
+static void layout_sections(struct module *mod, const Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs, const char *secstrings)
{
static unsigned long const masks[][2] = {
/* NOTE: all executable code must be the first section
@@ -315,7 +200,6 @@
for (i = 0; i < hdr->e_shnum; ++i) {
Elf_Shdr *s = &sechdrs[i];
- // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
if ((s->sh_flags & masks[m][0]) != masks[m][0]
|| (s->sh_flags & masks[m][1])
|| s->sh_entsize != ~0UL)
@@ -330,7 +214,6 @@
}
}
-
/* from module-elf32.c, but subverted a little */
struct mips_hi16 {
@@ -353,20 +236,18 @@
{
int rel;
- if( !(*location & 0xffff) ) {
+ if (!(*location & 0xffff)) {
rel = (int)v - gp_addr;
- }
- else {
+ } else {
/* .sbss + gp(relative) + offset */
/* kludge! */
rel = (int)(short)((int)v + gp_offs +
(int)(short)(*location & 0xffff) - gp_addr);
}
- if( (rel > 32768) || (rel < -32768) ) {
- printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
- "relative address 0x%x out of range of gp register\n",
- rel);
+ if ((rel > 32768) || (rel < -32768)) {
+ pr_debug("VPE loader: apply_r_mips_gprel16: relative address 0x%x out of range of gp register\n",
+ rel);
return -ENOEXEC;
}
@@ -380,12 +261,12 @@
{
int rel;
rel = (((unsigned int)v - (unsigned int)location));
- rel >>= 2; // because the offset is in _instructions_ not bytes.
- rel -= 1; // and one instruction less due to the branch delay slot.
+ rel >>= 2; /* because the offset is in _instructions_ not bytes. */
+ rel -= 1; /* and one instruction less due to the branch delay slot. */
- if( (rel > 32768) || (rel < -32768) ) {
- printk(KERN_DEBUG "VPE loader: "
- "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+ if ((rel > 32768) || (rel < -32768)) {
+ pr_debug("VPE loader: apply_r_mips_pc16: relative address out of range 0x%x\n",
+ rel);
return -ENOEXEC;
}
@@ -406,8 +287,7 @@
Elf32_Addr v)
{
if (v % 4) {
- printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
- " unaligned relocation\n");
+ pr_debug("VPE loader: apply_r_mips_26: unaligned relocation\n");
return -ENOEXEC;
}
@@ -438,7 +318,7 @@
* the carry we need to add. Save the information, and let LO16 do the
* actual relocation.
*/
- n = kmalloc(sizeof *n, GFP_KERNEL);
+ n = kmalloc(sizeof(*n), GFP_KERNEL);
if (!n)
return -ENOMEM;
@@ -470,9 +350,7 @@
* The value for the HI16 had best be the same.
*/
if (v != l->value) {
- printk(KERN_DEBUG "VPE loader: "
- "apply_r_mips_lo16/hi16: \t"
- "inconsistent value information\n");
+ pr_debug("VPE loader: apply_r_mips_lo16/hi16: inconsistent value information\n");
goto out_free;
}
@@ -568,20 +446,19 @@
+ ELF32_R_SYM(r_info);
if (!sym->st_value) {
- printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
- me->name, strtab + sym->st_name);
+ pr_debug("%s: undefined weak symbol %s\n",
+ me->name, strtab + sym->st_name);
/* just print the warning, dont barf */
}
v = sym->st_value;
res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
- if( res ) {
+ if (res) {
char *r = rstrs[ELF32_R_TYPE(r_info)];
- printk(KERN_WARNING "VPE loader: .text+0x%x "
- "relocation type %s for symbol \"%s\" failed\n",
- rel[i].r_offset, r ? r : "UNKNOWN",
- strtab + sym->st_name);
+ pr_warn("VPE loader: .text+0x%x relocation type %s for symbol \"%s\" failed\n",
+ rel[i].r_offset, r ? r : "UNKNOWN",
+ strtab + sym->st_name);
return res;
}
}
@@ -596,10 +473,8 @@
}
/* end module-elf32.c */
-
-
/* Change all symbols so that sh_value encodes the pointer directly. */
-static void simplify_symbols(Elf_Shdr * sechdrs,
+static void simplify_symbols(Elf_Shdr *sechdrs,
unsigned int symindex,
const char *strtab,
const char *secstrings,
@@ -640,18 +515,16 @@
break;
case SHN_MIPS_SCOMMON:
- printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
- "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
- sym[i].st_shndx);
- // .sbss section
+ pr_debug("simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+ strtab + sym[i].st_name, sym[i].st_shndx);
+ /* .sbss section */
break;
default:
secbase = sechdrs[sym[i].st_shndx].sh_addr;
- if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
+ if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0)
save_gp_address(secbase, sym[i].st_value);
- }
sym[i].st_value += secbase;
break;
@@ -660,142 +533,21 @@
}
#ifdef DEBUG_ELFLOADER
-static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
+static void dump_elfsymbols(Elf_Shdr *sechdrs, unsigned int symindex,
const char *strtab, struct module *mod)
{
Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
- printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
+ pr_debug("dump_elfsymbols: n %d\n", n);
for (i = 1; i < n; i++) {
- printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
- strtab + sym[i].st_name, sym[i].st_value);
+ pr_debug(" i %d name <%s> 0x%x\n", i, strtab + sym[i].st_name,
+ sym[i].st_value);
}
}
#endif
-/* We are prepared so configure and start the VPE... */
-static int vpe_run(struct vpe * v)
-{
- unsigned long flags, val, dmt_flag;
- struct vpe_notifications *n;
- unsigned int vpeflags;
- struct tc *t;
-
- /* check we are the Master VPE */
- local_irq_save(flags);
- val = read_c0_vpeconf0();
- if (!(val & VPECONF0_MVP)) {
- printk(KERN_WARNING
- "VPE loader: only Master VPE's are allowed to configure MT\n");
- local_irq_restore(flags);
-
- return -1;
- }
-
- dmt_flag = dmt();
- vpeflags = dvpe();
-
- if (list_empty(&v->tc)) {
- evpe(vpeflags);
- emt(dmt_flag);
- local_irq_restore(flags);
-
- printk(KERN_WARNING
- "VPE loader: No TC's associated with VPE %d\n",
- v->minor);
-
- return -ENOEXEC;
- }
-
- t = list_first_entry(&v->tc, struct tc, tc);
-
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
- settc(t->index);
-
- /* should check it is halted, and not activated */
- if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
- evpe(vpeflags);
- emt(dmt_flag);
- local_irq_restore(flags);
-
- printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
- t->index);
-
- return -ENOEXEC;
- }
-
- /* Write the address we want it to start running from in the TCPC register. */
- write_tc_c0_tcrestart((unsigned long)v->__start);
- write_tc_c0_tccontext((unsigned long)0);
-
- /*
- * Mark the TC as activated, not interrupt exempt and not dynamically
- * allocatable
- */
- val = read_tc_c0_tcstatus();
- val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
- write_tc_c0_tcstatus(val);
-
- write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
-
- /*
- * The sde-kit passes 'memsize' to __start in $a3, so set something
- * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
- * DFLT_HEAP_SIZE when you compile your program
- */
- mttgpr(6, v->ntcs);
- mttgpr(7, physical_memsize);
-
- /* set up VPE1 */
- /*
- * bind the TC to VPE 1 as late as possible so we only have the final
- * VPE registers to set up, and so an EJTAG probe can trigger on it
- */
- write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
-
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
-
- back_to_back_c0_hazard();
-
- /* Set up the XTC bit in vpeconf0 to point at our tc */
- write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
- | (t->index << VPECONF0_XTC_SHIFT));
-
- back_to_back_c0_hazard();
-
- /* enable this VPE */
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
-
- /* clear out any left overs from a previous program */
- write_vpe_c0_status(0);
- write_vpe_c0_cause(0);
-
- /* take system out of configuration state */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
-
- /*
- * SMTC/SMVP kernels manage VPE enable independently,
- * but uniprocessor kernels need to turn it on, even
- * if that wasn't the pre-dvpe() state.
- */
-#ifdef CONFIG_SMP
- evpe(vpeflags);
-#else
- evpe(EVPE_ENABLE);
-#endif
- emt(dmt_flag);
- local_irq_restore(flags);
-
- list_for_each_entry(n, &v->notify, list)
- n->start(minor);
-
- return 0;
-}
-
-static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
+static int find_vpe_symbols(struct vpe *v, Elf_Shdr *sechdrs,
unsigned int symindex, const char *strtab,
struct module *mod)
{
@@ -803,16 +555,14 @@
unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
for (i = 1; i < n; i++) {
- if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
+ if (strcmp(strtab + sym[i].st_name, "__start") == 0)
v->__start = sym[i].st_value;
- }
- if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
+ if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0)
v->shared_ptr = (void *)sym[i].st_value;
- }
}
- if ( (v->__start == 0) || (v->shared_ptr == NULL))
+ if ((v->__start == 0) || (v->shared_ptr == NULL))
return -1;
return 0;
@@ -823,14 +573,14 @@
* contents of the program (p)buffer performing relocatations/etc, free's it
* when finished.
*/
-static int vpe_elfload(struct vpe * v)
+static int vpe_elfload(struct vpe *v)
{
Elf_Ehdr *hdr;
Elf_Shdr *sechdrs;
long err = 0;
char *secstrings, *strtab = NULL;
unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
- struct module mod; // so we can re-use the relocations code
+ struct module mod; /* so we can re-use the relocations code */
memset(&mod, 0, sizeof(struct module));
strcpy(mod.name, "VPE loader");
@@ -844,8 +594,7 @@
|| (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
- printk(KERN_WARNING
- "VPE loader: program wrong arch or weird elf version\n");
+ pr_warn("VPE loader: program wrong arch or weird elf version\n");
return -ENOEXEC;
}
@@ -854,8 +603,7 @@
relocate = 1;
if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
- printk(KERN_ERR "VPE loader: program length %u truncated\n",
- len);
+ pr_err("VPE loader: program length %u truncated\n", len);
return -ENOEXEC;
}
@@ -870,22 +618,24 @@
if (relocate) {
for (i = 1; i < hdr->e_shnum; i++) {
- if (sechdrs[i].sh_type != SHT_NOBITS
- && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
- printk(KERN_ERR "VPE program length %u truncated\n",
+ if ((sechdrs[i].sh_type != SHT_NOBITS) &&
+ (len < sechdrs[i].sh_offset + sechdrs[i].sh_size)) {
+ pr_err("VPE program length %u truncated\n",
len);
return -ENOEXEC;
}
/* Mark all sections sh_addr with their address in the
temporary image. */
- sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+ sechdrs[i].sh_addr = (size_t) hdr +
+ sechdrs[i].sh_offset;
/* Internal symbols and strings. */
if (sechdrs[i].sh_type == SHT_SYMTAB) {
symindex = i;
strindex = sechdrs[i].sh_link;
- strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+ strtab = (char *)hdr +
+ sechdrs[strindex].sh_offset;
}
}
layout_sections(&mod, hdr, sechdrs, secstrings);
@@ -912,8 +662,9 @@
/* Update sh_addr to point to copy in image. */
sechdrs[i].sh_addr = (unsigned long)dest;
- printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
- secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
+ pr_debug(" section sh_name %s sh_addr 0x%x\n",
+ secstrings + sechdrs[i].sh_name,
+ sechdrs[i].sh_addr);
}
/* Fix up syms, so that st_value is a pointer to location. */
@@ -934,17 +685,18 @@
continue;
if (sechdrs[i].sh_type == SHT_REL)
- err = apply_relocations(sechdrs, strtab, symindex, i,
- &mod);
+ err = apply_relocations(sechdrs, strtab,
+ symindex, i, &mod);
else if (sechdrs[i].sh_type == SHT_RELA)
- err = apply_relocate_add(sechdrs, strtab, symindex, i,
- &mod);
+ err = apply_relocate_add(sechdrs, strtab,
+ symindex, i, &mod);
if (err < 0)
return err;
}
} else {
- struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
+ struct elf_phdr *phdr = (struct elf_phdr *)
+ ((char *)hdr + hdr->e_phoff);
for (i = 0; i < hdr->e_phnum; i++) {
if (phdr->p_type == PT_LOAD) {
@@ -962,11 +714,15 @@
if (sechdrs[i].sh_type == SHT_SYMTAB) {
symindex = i;
strindex = sechdrs[i].sh_link;
- strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+ strtab = (char *)hdr +
+ sechdrs[strindex].sh_offset;
- /* mark the symtab's address for when we try to find the
- magic symbols */
- sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+ /*
+ * mark symtab's address for when we try
+ * to find the magic symbols
+ */
+ sechdrs[i].sh_addr = (size_t) hdr +
+ sechdrs[i].sh_offset;
}
}
}
@@ -977,53 +733,19 @@
if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
if (v->__start == 0) {
- printk(KERN_WARNING "VPE loader: program does not contain "
- "a __start symbol\n");
+ pr_warn("VPE loader: program does not contain a __start symbol\n");
return -ENOEXEC;
}
if (v->shared_ptr == NULL)
- printk(KERN_WARNING "VPE loader: "
- "program does not contain vpe_shared symbol.\n"
- " Unable to use AMVP (AP/SP) facilities.\n");
+ pr_warn("VPE loader: program does not contain vpe_shared symbol.\n"
+ " Unable to use AMVP (AP/SP) facilities.\n");
}
- printk(" elf loaded\n");
+ pr_info(" elf loaded\n");
return 0;
}
-static void cleanup_tc(struct tc *tc)
-{
- unsigned long flags;
- unsigned int mtflags, vpflags;
- int tmp;
-
- local_irq_save(flags);
- mtflags = dmt();
- vpflags = dvpe();
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
- settc(tc->index);
- tmp = read_tc_c0_tcstatus();
-
- /* mark not allocated and not dynamically allocatable */
- tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
- tmp |= TCSTATUS_IXMT; /* interrupt exempt */
- write_tc_c0_tcstatus(tmp);
-
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
-
- /* bind it to anything other than VPE1 */
-// write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
-
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
- evpe(vpflags);
- emt(mtflags);
- local_irq_restore(flags);
-}
-
static int getcwd(char *buff, int size)
{
mm_segment_t old_fs;
@@ -1043,39 +765,39 @@
static int vpe_open(struct inode *inode, struct file *filp)
{
enum vpe_state state;
- struct vpe_notifications *not;
+ struct vpe_notifications *notifier;
struct vpe *v;
int ret;
- if (minor != iminor(inode)) {
+ if (VPE_MODULE_MINOR != iminor(inode)) {
/* assume only 1 device at the moment. */
- pr_warning("VPE loader: only vpe1 is supported\n");
+ pr_warn("VPE loader: only vpe1 is supported\n");
return -ENODEV;
}
- if ((v = get_vpe(tclimit)) == NULL) {
- pr_warning("VPE loader: unable to get vpe\n");
+ v = get_vpe(aprp_cpu_index());
+ if (v == NULL) {
+ pr_warn("VPE loader: unable to get vpe\n");
return -ENODEV;
}
state = xchg(&v->state, VPE_STATE_INUSE);
if (state != VPE_STATE_UNUSED) {
- printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
+ pr_debug("VPE loader: tc in use dumping regs\n");
- list_for_each_entry(not, &v->notify, list) {
- not->stop(tclimit);
- }
+ list_for_each_entry(notifier, &v->notify, list)
+ notifier->stop(aprp_cpu_index());
release_progmem(v->load_addr);
- cleanup_tc(get_tc(tclimit));
+ cleanup_tc(get_tc(aprp_cpu_index()));
}
/* this of-course trashes what was there before... */
v->pbuffer = vmalloc(P_SIZE);
if (!v->pbuffer) {
- pr_warning("VPE loader: unable to allocate memory\n");
+ pr_warn("VPE loader: unable to allocate memory\n");
return -ENOMEM;
}
v->plen = P_SIZE;
@@ -1085,7 +807,7 @@
v->cwd[0] = 0;
ret = getcwd(v->cwd, VPE_PATH_MAX);
if (ret < 0)
- printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
+ pr_warn("VPE loader: open, getcwd returned %d\n", ret);
v->shared_ptr = NULL;
v->__start = 0;
@@ -1099,20 +821,20 @@
Elf_Ehdr *hdr;
int ret = 0;
- v = get_vpe(tclimit);
+ v = get_vpe(aprp_cpu_index());
if (v == NULL)
return -ENODEV;
hdr = (Elf_Ehdr *) v->pbuffer;
if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
- if (vpe_elfload(v) >= 0) {
+ if ((vpe_elfload(v) >= 0) && vpe_run) {
vpe_run(v);
} else {
- printk(KERN_WARNING "VPE loader: ELF load failed.\n");
+ pr_warn("VPE loader: ELF load failed.\n");
ret = -ENOEXEC;
}
} else {
- printk(KERN_WARNING "VPE loader: only elf files are supported\n");
+ pr_warn("VPE loader: only elf files are supported\n");
ret = -ENOEXEC;
}
@@ -1130,22 +852,22 @@
return ret;
}
-static ssize_t vpe_write(struct file *file, const char __user * buffer,
- size_t count, loff_t * ppos)
+static ssize_t vpe_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
size_t ret = count;
struct vpe *v;
- if (iminor(file_inode(file)) != minor)
+ if (iminor(file_inode(file)) != VPE_MODULE_MINOR)
return -ENODEV;
- v = get_vpe(tclimit);
+ v = get_vpe(aprp_cpu_index());
+
if (v == NULL)
return -ENODEV;
if ((count + v->len) > v->plen) {
- printk(KERN_WARNING
- "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
+ pr_warn("VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
return -ENOMEM;
}
@@ -1157,7 +879,7 @@
return ret;
}
-static const struct file_operations vpe_fops = {
+const struct file_operations vpe_fops = {
.owner = THIS_MODULE,
.open = vpe_open,
.release = vpe_release,
@@ -1165,396 +887,40 @@
.llseek = noop_llseek,
};
-/* module wrapper entry points */
-/* give me a vpe */
-vpe_handle vpe_alloc(void)
-{
- int i;
- struct vpe *v;
-
- /* find a vpe */
- for (i = 1; i < MAX_VPES; i++) {
- if ((v = get_vpe(i)) != NULL) {
- v->state = VPE_STATE_INUSE;
- return v;
- }
- }
- return NULL;
-}
-
-EXPORT_SYMBOL(vpe_alloc);
-
-/* start running from here */
-int vpe_start(vpe_handle vpe, unsigned long start)
-{
- struct vpe *v = vpe;
-
- v->__start = start;
- return vpe_run(v);
-}
-
-EXPORT_SYMBOL(vpe_start);
-
-/* halt it for now */
-int vpe_stop(vpe_handle vpe)
-{
- struct vpe *v = vpe;
- struct tc *t;
- unsigned int evpe_flags;
-
- evpe_flags = dvpe();
-
- if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
-
- settc(t->index);
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
- }
-
- evpe(evpe_flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(vpe_stop);
-
-/* I've done with it thank you */
-int vpe_free(vpe_handle vpe)
-{
- struct vpe *v = vpe;
- struct tc *t;
- unsigned int evpe_flags;
-
- if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
- return -ENOEXEC;
- }
-
- evpe_flags = dvpe();
-
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
- settc(t->index);
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
-
- /* halt the TC */
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
-
- /* mark the TC unallocated */
- write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
-
- v->state = VPE_STATE_UNUSED;
-
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
- evpe(evpe_flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(vpe_free);
-
void *vpe_get_shared(int index)
{
- struct vpe *v;
+ struct vpe *v = get_vpe(index);
- if ((v = get_vpe(index)) == NULL)
+ if (v == NULL)
return NULL;
return v->shared_ptr;
}
-
EXPORT_SYMBOL(vpe_get_shared);
int vpe_notify(int index, struct vpe_notifications *notify)
{
- struct vpe *v;
+ struct vpe *v = get_vpe(index);
- if ((v = get_vpe(index)) == NULL)
+ if (v == NULL)
return -1;
list_add(¬ify->list, &v->notify);
return 0;
}
-
EXPORT_SYMBOL(vpe_notify);
char *vpe_getcwd(int index)
{
- struct vpe *v;
+ struct vpe *v = get_vpe(index);
- if ((v = get_vpe(index)) == NULL)
+ if (v == NULL)
return NULL;
return v->cwd;
}
-
EXPORT_SYMBOL(vpe_getcwd);
-static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct vpe *vpe = get_vpe(tclimit);
- struct vpe_notifications *not;
-
- list_for_each_entry(not, &vpe->notify, list) {
- not->stop(tclimit);
- }
-
- release_progmem(vpe->load_addr);
- cleanup_tc(get_tc(tclimit));
- vpe_stop(vpe);
- vpe_free(vpe);
-
- return len;
-}
-static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
-
-static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
- char *buf)
-{
- struct vpe *vpe = get_vpe(tclimit);
-
- return sprintf(buf, "%d\n", vpe->ntcs);
-}
-
-static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct vpe *vpe = get_vpe(tclimit);
- unsigned long new;
- char *endp;
-
- new = simple_strtoul(buf, &endp, 0);
- if (endp == buf)
- goto out_einval;
-
- if (new == 0 || new > (hw_tcs - tclimit))
- goto out_einval;
-
- vpe->ntcs = new;
-
- return len;
-
-out_einval:
- return -EINVAL;
-}
-static DEVICE_ATTR_RW(ntcs);
-
-static struct attribute *vpe_attrs[] = {
- &dev_attr_kill.attr,
- &dev_attr_ntcs.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(vpe);
-
-static void vpe_device_release(struct device *cd)
-{
- kfree(cd);
-}
-
-struct class vpe_class = {
- .name = "vpe",
- .owner = THIS_MODULE,
- .dev_release = vpe_device_release,
- .dev_groups = vpe_groups,
-};
-
-struct device vpe_device;
-
-static int __init vpe_module_init(void)
-{
- unsigned int mtflags, vpflags;
- unsigned long flags, val;
- struct vpe *v = NULL;
- struct tc *t;
- int tc, err;
-
- if (!cpu_has_mipsmt) {
- printk("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-
- if (vpelimit == 0) {
- printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
- "initializing VPE loader.\nPass maxvpes=<n> argument as "
- "kernel argument\n");
-
- return -ENODEV;
- }
-
- if (tclimit == 0) {
- printk(KERN_WARNING "No TCs reserved for AP/SP, not "
- "initializing VPE loader.\nPass maxtcs=<n> argument as "
- "kernel argument\n");
-
- return -ENODEV;
- }
-
- major = register_chrdev(0, module_name, &vpe_fops);
- if (major < 0) {
- printk("VPE loader: unable to register character device\n");
- return major;
- }
-
- err = class_register(&vpe_class);
- if (err) {
- printk(KERN_ERR "vpe_class registration failed\n");
- goto out_chrdev;
- }
-
- device_initialize(&vpe_device);
- vpe_device.class = &vpe_class,
- vpe_device.parent = NULL,
- dev_set_name(&vpe_device, "vpe1");
- vpe_device.devt = MKDEV(major, minor);
- err = device_add(&vpe_device);
- if (err) {
- printk(KERN_ERR "Adding vpe_device failed\n");
- goto out_class;
- }
-
- local_irq_save(flags);
- mtflags = dmt();
- vpflags = dvpe();
-
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
- /* dump_mtregs(); */
-
- val = read_c0_mvpconf0();
- hw_tcs = (val & MVPCONF0_PTC) + 1;
- hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-
- for (tc = tclimit; tc < hw_tcs; tc++) {
- /*
- * Must re-enable multithreading temporarily or in case we
- * reschedule send IPIs or similar we might hang.
- */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
- evpe(vpflags);
- emt(mtflags);
- local_irq_restore(flags);
- t = alloc_tc(tc);
- if (!t) {
- err = -ENOMEM;
- goto out;
- }
-
- local_irq_save(flags);
- mtflags = dmt();
- vpflags = dvpe();
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
- /* VPE's */
- if (tc < hw_tcs) {
- settc(tc);
-
- if ((v = alloc_vpe(tc)) == NULL) {
- printk(KERN_WARNING "VPE: unable to allocate VPE\n");
-
- goto out_reenable;
- }
-
- v->ntcs = hw_tcs - tclimit;
-
- /* add the tc to the list of this vpe's tc's. */
- list_add(&t->tc, &v->tc);
-
- /* deactivate all but vpe0 */
- if (tc >= tclimit) {
- unsigned long tmp = read_vpe_c0_vpeconf0();
-
- tmp &= ~VPECONF0_VPA;
-
- /* master VPE */
- tmp |= VPECONF0_MVP;
- write_vpe_c0_vpeconf0(tmp);
- }
-
- /* disable multi-threading with TC's */
- write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
-
- if (tc >= vpelimit) {
- /*
- * Set config to be the same as vpe0,
- * particularly kseg0 coherency alg
- */
- write_vpe_c0_config(read_c0_config());
- }
- }
-
- /* TC's */
- t->pvpe = v; /* set the parent vpe */
-
- if (tc >= tclimit) {
- unsigned long tmp;
-
- settc(tc);
-
- /* Any TC that is bound to VPE0 gets left as is - in case
- we are running SMTC on VPE0. A TC that is bound to any
- other VPE gets bound to VPE0, ideally I'd like to make
- it homeless but it doesn't appear to let me bind a TC
- to a non-existent VPE. Which is perfectly reasonable.
-
- The (un)bound state is visible to an EJTAG probe so may
- notify GDB...
- */
-
- if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
- /* tc is bound >vpe0 */
- write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
-
- t->pvpe = get_vpe(0); /* set the parent vpe */
- }
-
- /* halt the TC */
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
-
- tmp = read_tc_c0_tcstatus();
-
- /* mark not activated and not dynamically allocatable */
- tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
- tmp |= TCSTATUS_IXMT; /* interrupt exempt */
- write_tc_c0_tcstatus(tmp);
- }
- }
-
-out_reenable:
- /* release config state */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
-
- evpe(vpflags);
- emt(mtflags);
- local_irq_restore(flags);
-
- return 0;
-
-out_class:
- class_unregister(&vpe_class);
-out_chrdev:
- unregister_chrdev(major, module_name);
-
-out:
- return err;
-}
-
-static void __exit vpe_module_exit(void)
-{
- struct vpe *v, *n;
-
- device_del(&vpe_device);
- unregister_chrdev(major, module_name);
-
- /* No locking needed here */
- list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
- if (v->state != VPE_STATE_UNUSED)
- release_vpe(v);
- }
-}
-
module_init(vpe_module_init);
module_exit(vpe_module_exit);
MODULE_DESCRIPTION("MIPS VPE Loader");
diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c
index 73b3482..da5186f 100644
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -1001,7 +1001,6 @@
hrtimer_init(&vcpu->arch.comparecount_timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
vcpu->arch.comparecount_timer.function = kvm_mips_comparecount_wakeup;
- kvm_mips_init_shadow_tlb(vcpu);
return 0;
}
diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index c777dd3..50ab9c4 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -10,7 +10,6 @@
* Authors: Sanjay Lal <sanjayl@kymasys.com>
*/
-#include <linux/init.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
@@ -25,6 +24,7 @@
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#include <asm/tlb.h>
#undef CONFIG_MIPS_MT
#include <asm/r4kcache.h>
@@ -35,9 +35,6 @@
#define PRIx64 "llx"
-/* Use VZ EntryHi.EHINV to invalidate TLB entries */
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
atomic_t kvm_mips_instance;
EXPORT_SYMBOL(kvm_mips_instance);
@@ -147,30 +144,6 @@
}
}
-void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu)
-{
- int i;
- volatile struct kvm_mips_tlb tlb;
-
- printk("Shadow TLBs:\n");
- for (i = 0; i < KVM_MIPS_GUEST_TLB_SIZE; i++) {
- tlb = vcpu->arch.shadow_tlb[smp_processor_id()][i];
- printk("TLB%c%3d Hi 0x%08lx ",
- (tlb.tlb_lo0 | tlb.tlb_lo1) & MIPS3_PG_V ? ' ' : '*',
- i, tlb.tlb_hi);
- printk("Lo0=0x%09" PRIx64 " %c%c attr %lx ",
- (uint64_t) mips3_tlbpfn_to_paddr(tlb.tlb_lo0),
- (tlb.tlb_lo0 & MIPS3_PG_D) ? 'D' : ' ',
- (tlb.tlb_lo0 & MIPS3_PG_G) ? 'G' : ' ',
- (tlb.tlb_lo0 >> 3) & 7);
- printk("Lo1=0x%09" PRIx64 " %c%c attr %lx sz=%lx\n",
- (uint64_t) mips3_tlbpfn_to_paddr(tlb.tlb_lo1),
- (tlb.tlb_lo1 & MIPS3_PG_D) ? 'D' : ' ',
- (tlb.tlb_lo1 & MIPS3_PG_G) ? 'G' : ' ',
- (tlb.tlb_lo1 >> 3) & 7, tlb.tlb_mask);
- }
-}
-
static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
{
int srcu_idx, err = 0;
@@ -657,70 +630,6 @@
cpu_context(cpu, mm) = asid_cache(cpu) = asid;
}
-void kvm_shadow_tlb_put(struct kvm_vcpu *vcpu)
-{
- unsigned long flags;
- unsigned long old_entryhi;
- unsigned long old_pagemask;
- int entry = 0;
- int cpu = smp_processor_id();
-
- local_irq_save(flags);
-
- old_entryhi = read_c0_entryhi();
- old_pagemask = read_c0_pagemask();
-
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- write_c0_index(entry);
- mtc0_tlbw_hazard();
- tlb_read();
- tlbw_use_hazard();
-
- vcpu->arch.shadow_tlb[cpu][entry].tlb_hi = read_c0_entryhi();
- vcpu->arch.shadow_tlb[cpu][entry].tlb_lo0 = read_c0_entrylo0();
- vcpu->arch.shadow_tlb[cpu][entry].tlb_lo1 = read_c0_entrylo1();
- vcpu->arch.shadow_tlb[cpu][entry].tlb_mask = read_c0_pagemask();
- }
-
- write_c0_entryhi(old_entryhi);
- write_c0_pagemask(old_pagemask);
- mtc0_tlbw_hazard();
-
- local_irq_restore(flags);
-
-}
-
-void kvm_shadow_tlb_load(struct kvm_vcpu *vcpu)
-{
- unsigned long flags;
- unsigned long old_ctx;
- int entry;
- int cpu = smp_processor_id();
-
- local_irq_save(flags);
-
- old_ctx = read_c0_entryhi();
-
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- write_c0_entryhi(vcpu->arch.shadow_tlb[cpu][entry].tlb_hi);
- mtc0_tlbw_hazard();
- write_c0_entrylo0(vcpu->arch.shadow_tlb[cpu][entry].tlb_lo0);
- write_c0_entrylo1(vcpu->arch.shadow_tlb[cpu][entry].tlb_lo1);
-
- write_c0_index(entry);
- mtc0_tlbw_hazard();
-
- tlb_write_indexed();
- tlbw_use_hazard();
- }
-
- tlbw_use_hazard();
- write_c0_entryhi(old_ctx);
- mtc0_tlbw_hazard();
- local_irq_restore(flags);
-}
-
-
void kvm_local_flush_tlb_all(void)
{
unsigned long flags;
@@ -749,30 +658,6 @@
local_irq_restore(flags);
}
-void kvm_mips_init_shadow_tlb(struct kvm_vcpu *vcpu)
-{
- int cpu, entry;
-
- for_each_possible_cpu(cpu) {
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- vcpu->arch.shadow_tlb[cpu][entry].tlb_hi =
- UNIQUE_ENTRYHI(entry);
- vcpu->arch.shadow_tlb[cpu][entry].tlb_lo0 = 0x0;
- vcpu->arch.shadow_tlb[cpu][entry].tlb_lo1 = 0x0;
- vcpu->arch.shadow_tlb[cpu][entry].tlb_mask =
- read_c0_pagemask();
-#ifdef DEBUG
- kvm_debug
- ("shadow_tlb[%d][%d]: tlb_hi: %#lx, lo0: %#lx, lo1: %#lx\n",
- cpu, entry,
- vcpu->arch.shadow_tlb[cpu][entry].tlb_hi,
- vcpu->arch.shadow_tlb[cpu][entry].tlb_lo0,
- vcpu->arch.shadow_tlb[cpu][entry].tlb_lo1);
-#endif
- }
- }
-}
-
/* Restore ASID once we are scheduled back after preemption */
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
@@ -810,14 +695,6 @@
vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id);
}
- /* Only reload shadow host TLB if new ASIDs haven't been allocated */
-#if 0
- if ((atomic_read(&kvm_mips_instance) > 1) && !newasid) {
- kvm_mips_flush_host_tlb(0);
- kvm_shadow_tlb_load(vcpu);
- }
-#endif
-
if (!newasid) {
/* If we preempted while the guest was executing, then reload the pre-empted ASID */
if (current->flags & PF_VCPU) {
@@ -863,12 +740,6 @@
vcpu->arch.preempt_entryhi = read_c0_entryhi();
vcpu->arch.last_sched_cpu = cpu;
-#if 0
- if ((atomic_read(&kvm_mips_instance) > 1)) {
- kvm_shadow_tlb_put(vcpu);
- }
-#endif
-
if (((cpu_context(cpu, current->mm) ^ asid_cache(cpu)) &
ASID_VERSION_MASK)) {
kvm_debug("%s: Dropping MMU Context: %#lx\n", __func__,
@@ -930,10 +801,8 @@
}
EXPORT_SYMBOL(kvm_local_flush_tlb_all);
-EXPORT_SYMBOL(kvm_shadow_tlb_put);
EXPORT_SYMBOL(kvm_mips_handle_mapped_seg_tlb_fault);
EXPORT_SYMBOL(kvm_mips_handle_commpage_tlb_fault);
-EXPORT_SYMBOL(kvm_mips_init_shadow_tlb);
EXPORT_SYMBOL(kvm_mips_dump_host_tlbs);
EXPORT_SYMBOL(kvm_mips_handle_kseg0_tlb_fault);
EXPORT_SYMBOL(kvm_mips_host_tlb_lookup);
@@ -941,8 +810,6 @@
EXPORT_SYMBOL(kvm_mips_guest_tlb_lookup);
EXPORT_SYMBOL(kvm_mips_host_tlb_inv);
EXPORT_SYMBOL(kvm_mips_translate_guest_kseg0_to_hpa);
-EXPORT_SYMBOL(kvm_shadow_tlb_load);
-EXPORT_SYMBOL(kvm_mips_dump_shadow_tlbs);
EXPORT_SYMBOL(kvm_mips_dump_guest_tlbs);
EXPORT_SYMBOL(kvm_get_inst);
EXPORT_SYMBOL(kvm_arch_vcpu_load);
diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
index 1ab576d..8750dc0 100644
--- a/arch/mips/lantiq/xway/clk.c
+++ b/arch/mips/lantiq/xway/clk.c
@@ -8,7 +8,6 @@
#include <linux/io.h>
#include <linux/export.h>
-#include <linux/init.h>
#include <linux/clk.h>
#include <asm/time.h>
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 08f7ebd..78a91fa 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -220,10 +220,6 @@
int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- panic("Failed to get dma resource");
-
- /* remap dma register range */
ltq_dma_membase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ltq_dma_membase))
panic("Failed to remap dma resource");
diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c
index 793e234..942f32b 100644
--- a/arch/mips/lasat/at93c.c
+++ b/arch/mips/lasat/at93c.c
@@ -8,7 +8,6 @@
#include <linux/delay.h>
#include <asm/lasat/lasat.h>
#include <linux/module.h>
-#include <linux/init.h>
#include "at93c.h"
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
index 7eb3348..d613b97 100644
--- a/arch/mips/lasat/picvue.c
+++ b/arch/mips/lasat/picvue.c
@@ -9,7 +9,6 @@
#include <asm/bootinfo.h>
#include <asm/lasat/lasat.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
index d8522f8..09d5dee 100644
--- a/arch/mips/lib/uncached.c
+++ b/arch/mips/lib/uncached.c
@@ -8,7 +8,6 @@
* Author: Maciej W. Rozycki <macro@mips.com>
*/
-#include <linux/init.h>
#include <asm/addrspace.h>
#include <asm/bug.h>
diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c
index 4dc2f5f..aed32b8 100644
--- a/arch/mips/loongson/lemote-2f/clock.c
+++ b/arch/mips/loongson/lemote-2f/clock.c
@@ -10,7 +10,6 @@
#include <linux/cpufreq.h>
#include <linux/errno.h>
#include <linux/export.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index efe0088..506925b 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -417,14 +417,20 @@
case mm_mtc1_op:
case mm_cfc1_op:
case mm_ctc1_op:
+ case mm_mfhc1_op:
+ case mm_mthc1_op:
if (insn.mm_fp1_format.op == mm_mfc1_op)
op = mfc_op;
else if (insn.mm_fp1_format.op == mm_mtc1_op)
op = mtc_op;
else if (insn.mm_fp1_format.op == mm_cfc1_op)
op = cfc_op;
- else
+ else if (insn.mm_fp1_format.op == mm_ctc1_op)
op = ctc_op;
+ else if (insn.mm_fp1_format.op == mm_mfhc1_op)
+ op = mfhc_op;
+ else
+ op = mthc_op;
mips32_insn.fp1_format.opcode = cop1_op;
mips32_insn.fp1_format.op = op;
mips32_insn.fp1_format.rt =
@@ -853,20 +859,20 @@
* In the Linux kernel, we support selection of FPR format on the
* basis of the Status.FR bit. If an FPU is not present, the FR bit
* is hardwired to zero, which would imply a 32-bit FPU even for
- * 64-bit CPUs so we rather look at TIF_32BIT_REGS.
+ * 64-bit CPUs so we rather look at TIF_32BIT_FPREGS.
* FPU emu is slow and bulky and optimizing this function offers fairly
* sizeable benefits so we try to be clever and make this function return
* a constant whenever possible, that is on 64-bit kernels without O32
- * compatibility enabled and on 32-bit kernels.
+ * compatibility enabled and on 32-bit without 64-bit FPU support.
*/
static inline int cop1_64bit(struct pt_regs *xcp)
{
#if defined(CONFIG_64BIT) && !defined(CONFIG_MIPS32_O32)
return 1;
-#elif defined(CONFIG_64BIT) && defined(CONFIG_MIPS32_O32)
- return !test_thread_flag(TIF_32BIT_REGS);
-#else
+#elif defined(CONFIG_32BIT) && !defined(CONFIG_MIPS_O32_FP64_SUPPORT)
return 0;
+#else
+ return !test_thread_flag(TIF_32BIT_FPREGS);
#endif
}
@@ -878,6 +884,10 @@
ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \
ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32)
+#define SIFROMHREG(si, x) ((si) = (int)(ctx->fpr[x] >> 32))
+#define SITOHREG(si, x) (ctx->fpr[x] = \
+ ctx->fpr[x] << 32 >> 32 | (u64)(si) << 32)
+
#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)])
#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di))
@@ -1055,6 +1065,25 @@
break;
#endif
+ case mfhc_op:
+ if (!cpu_has_mips_r2)
+ goto sigill;
+
+ /* copregister rd -> gpr[rt] */
+ if (MIPSInst_RT(ir) != 0) {
+ SIFROMHREG(xcp->regs[MIPSInst_RT(ir)],
+ MIPSInst_RD(ir));
+ }
+ break;
+
+ case mthc_op:
+ if (!cpu_has_mips_r2)
+ goto sigill;
+
+ /* copregister rd <- gpr[rt] */
+ SITOHREG(xcp->regs[MIPSInst_RT(ir)], MIPSInst_RD(ir));
+ break;
+
case mfc_op:
/* copregister rd -> gpr[rt] */
if (MIPSInst_RT(ir) != 0) {
@@ -1263,6 +1292,7 @@
#endif
default:
+sigill:
return SIGILL;
}
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 1c58657..3aeae07 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -89,8 +89,9 @@
{
int i;
int err = 0;
+ int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1;
- for (i = 0; i < 32; i+=2) {
+ for (i = 0; i < 32; i += inc) {
err |=
__put_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
}
@@ -103,8 +104,9 @@
{
int i;
int err = 0;
+ int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1;
- for (i = 0; i < 32; i+=2) {
+ for (i = 0; i < 32; i += inc) {
err |=
__get_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
}
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index c8efdb5..f41a5c5 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -6,7 +6,6 @@
* Copyright (C) 2005-2007 Cavium Networks
*/
#include <linux/export.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 2fcde0c..135ec31 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -9,7 +9,6 @@
* Copyright (C) 1998 Gleb Raiko & Vladimir Roganov
* Copyright (C) 2001, 2004, 2007 Maciej W. Rozycki
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 49e572d..c14259e 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1020,10 +1020,14 @@
*/
config1 = read_c0_config1();
- if ((lsize = ((config1 >> 19) & 7)))
- c->icache.linesz = 2 << lsize;
- else
- c->icache.linesz = lsize;
+ lsize = (config1 >> 19) & 7;
+
+ /* IL == 7 is reserved */
+ if (lsize == 7)
+ panic("Invalid icache line size");
+
+ c->icache.linesz = lsize ? 2 << lsize : 0;
+
c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
@@ -1040,10 +1044,14 @@
*/
c->dcache.flags = 0;
- if ((lsize = ((config1 >> 10) & 7)))
- c->dcache.linesz = 2 << lsize;
- else
- c->dcache.linesz= lsize;
+ lsize = (config1 >> 10) & 7;
+
+ /* DL == 7 is reserved */
+ if (lsize == 7)
+ panic("Invalid dcache line size");
+
+ c->dcache.linesz = lsize ? 2 << lsize : 0;
+
c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
c->dcache.ways = 1 + ((config1 >> 7) & 7);
@@ -1105,6 +1113,8 @@
case CPU_34K:
case CPU_74K:
case CPU_1004K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
if (current_cpu_type() == CPU_74K)
alias_74k_erratum(c);
if ((read_c0_config7() & (1 << 16))) {
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 15f813c..fde7e56 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -8,7 +8,6 @@
*/
#include <linux/fs.h>
#include <linux/fcntl.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
#include <linux/module.h>
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 191cf6e..5d5f296 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -15,7 +15,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/init.h>
#include <asm/asm.h>
#include <asm/regdef.h>
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 2e94185..44b6dff 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -23,6 +23,7 @@
#include <dma-coherence.h>
+#ifdef CONFIG_DMA_MAYBE_COHERENT
int coherentio = 0; /* User defined DMA coherency from command line. */
EXPORT_SYMBOL_GPL(coherentio);
int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
@@ -42,6 +43,7 @@
return 0;
}
early_param("nocoherentio", setnocoherentio);
+#endif
static inline struct page *dma_addr_to_page(struct device *dev,
dma_addr_t dma_addr)
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 01fda44..77e0ae0 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -11,7 +11,6 @@
* Copyright (C) 2008, 2009 Cavium Networks, Inc.
*/
-#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 1215617..6b59617 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -171,8 +171,6 @@
return (void*) vaddr;
}
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
void kunmap_coherent(void)
{
#ifndef CONFIG_MIPS_MT_SMTC
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index cbd81d1..58033c4 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -8,7 +8,6 @@
* Copyright (C) 2008 Thiemo Seufer
* Copyright (C) 2012 MIPS Technologies, Inc.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 08d05ae..7a56aee 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -76,6 +76,8 @@
case CPU_34K:
case CPU_74K:
case CPU_1004K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
case CPU_BMIPS5000:
if (config2 & (1 << 12))
return 0;
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index aaffbba..9ac1efc 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -6,7 +6,6 @@
#undef DEBUG
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/bitops.h>
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 9aca109..d657493 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -10,7 +10,6 @@
* Copyright (C) 2002 Ralf Baechle
* Copyright (C) 2002 Maciej W. Rozycki
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index da3b0b9..ae4ca24 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -20,16 +20,11 @@
#include <asm/bootinfo.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
+#include <asm/tlb.h>
#include <asm/tlbmisc.h>
extern void build_tlb_refill_handler(void);
-/*
- * Make sure all entries differ. If they're not different
- * MIPS32 will take revenge ...
- */
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
/* Atomicity and interruptability */
#ifdef CONFIG_MIPS_MT_SMTC
@@ -77,7 +72,7 @@
{
unsigned long flags;
unsigned long old_ctx;
- int entry;
+ int entry, ftlbhighset;
ENTER_CRITICAL(flags);
/* Save old context and create impossible VPN2 value */
@@ -88,13 +83,30 @@
entry = read_c0_wired();
/* Blast 'em all away. */
- while (entry < current_cpu_data.tlbsize) {
- /* Make sure all entries differ. */
- write_c0_entryhi(UNIQUE_ENTRYHI(entry));
- write_c0_index(entry);
- mtc0_tlbw_hazard();
- tlb_write_indexed();
- entry++;
+ if (cpu_has_tlbinv) {
+ if (current_cpu_data.tlbsizevtlb) {
+ write_c0_index(0);
+ mtc0_tlbw_hazard();
+ tlbinvf(); /* invalidate VTLB */
+ }
+ ftlbhighset = current_cpu_data.tlbsizevtlb +
+ current_cpu_data.tlbsizeftlbsets;
+ for (entry = current_cpu_data.tlbsizevtlb;
+ entry < ftlbhighset;
+ entry++) {
+ write_c0_index(entry);
+ mtc0_tlbw_hazard();
+ tlbinvf(); /* invalidate one FTLB set */
+ }
+ } else {
+ while (entry < current_cpu_data.tlbsize) {
+ /* Make sure all entries differ. */
+ write_c0_entryhi(UNIQUE_ENTRYHI(entry));
+ write_c0_index(entry);
+ mtc0_tlbw_hazard();
+ tlb_write_indexed();
+ entry++;
+ }
}
tlbw_use_hazard();
write_c0_entryhi(old_ctx);
@@ -133,7 +145,9 @@
start = round_down(start, PAGE_SIZE << 1);
end = round_up(end, PAGE_SIZE << 1);
size = (end - start) >> (PAGE_SHIFT + 1);
- if (size <= current_cpu_data.tlbsize/2) {
+ if (size <= (current_cpu_data.tlbsizeftlbsets ?
+ current_cpu_data.tlbsize / 8 :
+ current_cpu_data.tlbsize / 2)) {
int oldpid = read_c0_entryhi();
int newpid = cpu_asid(cpu, mm);
@@ -172,7 +186,9 @@
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
- if (size <= current_cpu_data.tlbsize / 2) {
+ if (size <= (current_cpu_data.tlbsizeftlbsets ?
+ current_cpu_data.tlbsize / 8 :
+ current_cpu_data.tlbsize / 2)) {
int pid = read_c0_entryhi();
start &= (PAGE_MASK << 1);
diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c
index 6a99733..138a2ec 100644
--- a/arch/mips/mm/tlb-r8k.c
+++ b/arch/mips/mm/tlb-r8k.c
@@ -8,7 +8,6 @@
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/init.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 183f2b5..b234b1b 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -26,7 +26,6 @@
#include <linux/types.h>
#include <linux/smp.h>
#include <linux/string.h>
-#include <linux/init.h>
#include <linux/cache.h>
#include <asm/cacheflush.h>
@@ -510,6 +509,7 @@
switch (current_cpu_type()) {
case CPU_M14KC:
case CPU_74K:
+ case CPU_PROAPTIV:
break;
default:
diff --git a/arch/mips/mm/uasm-micromips.c b/arch/mips/mm/uasm-micromips.c
index 060000f..b8d580c 100644
--- a/arch/mips/mm/uasm-micromips.c
+++ b/arch/mips/mm/uasm-micromips.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/init.h>
#include <asm/inst.h>
#include <asm/elf.h>
diff --git a/arch/mips/mm/uasm-mips.c b/arch/mips/mm/uasm-mips.c
index 0c72458..3abd609 100644
--- a/arch/mips/mm/uasm-mips.c
+++ b/arch/mips/mm/uasm-mips.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/init.h>
#include <asm/inst.h>
#include <asm/elf.h>
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 72fdedb..eae0ba3 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -9,7 +9,5 @@
malta-int.o malta-memory.o malta-platform.o \
malta-reset.o malta-setup.o malta-time.o
-obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
-
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o
diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c
index 1e47844..592ac04 100644
--- a/arch/mips/mti-malta/malta-amon.c
+++ b/arch/mips/mti-malta/malta-amon.c
@@ -1,30 +1,20 @@
/*
- * Copyright (C) 2007 MIPS Technologies, Inc.
- * All rights reserved.
-
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
+ * Copyright (C) 2007 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Arbitrary Monitor interface
+ * Arbitrary Monitor Interface
*/
-
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/smp.h>
#include <asm/addrspace.h>
-#include <asm/mips-boards/launch.h>
#include <asm/mipsmtregs.h>
+#include <asm/mips-boards/launch.h>
+#include <asm/vpe.h>
int amon_cpu_avail(int cpu)
{
@@ -48,7 +38,7 @@
return 1;
}
-void amon_cpu_start(int cpu,
+int amon_cpu_start(int cpu,
unsigned long pc, unsigned long sp,
unsigned long gp, unsigned long a0)
{
@@ -56,10 +46,10 @@
(struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (!amon_cpu_avail(cpu))
- return;
+ return -1;
if (cpu == smp_processor_id()) {
pr_debug("launch: I am cpu%d!\n", cpu);
- return;
+ return -1;
}
launch += cpu;
@@ -78,4 +68,21 @@
;
smp_rmb(); /* Target will be updating flags soon */
pr_debug("launch: cpu%d gone!\n", cpu);
+
+ return 0;
}
+
+#ifdef CONFIG_MIPS_VPE_LOADER
+int vpe_run(struct vpe *v)
+{
+ struct vpe_notifications *n;
+
+ if (amon_cpu_start(aprp_cpu_index(), v->__start, 0, 0, 0) < 0)
+ return -1;
+
+ list_for_each_entry(n, &v->notify, list)
+ n->start(VPE_MODULE_MINOR);
+
+ return 0;
+}
+#endif
diff --git a/arch/mips/mti-malta/malta-console.c b/arch/mips/mti-malta/malta-console.c
deleted file mode 100644
index 43bcfb4..0000000
--- a/arch/mips/mti-malta/malta-console.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Putting things on the screen/serial line using YAMONs facilities.
- */
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/serial_reg.h>
-#include <asm/io.h>
-
-
-#define PORT(offset) (0x3f8 + (offset))
-
-
-static inline unsigned int serial_in(int offset)
-{
- return inb(PORT(offset));
-}
-
-static inline void serial_out(int offset, int value)
-{
- outb(value, PORT(offset));
-}
-
-int prom_putchar(char c)
-{
- while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
- ;
-
- serial_out(UART_TX, c);
-
- return 1;
-}
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index ff8caff..fcebfce 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/serial_8250.h>
#include <asm/cacheflush.h>
#include <asm/smp-ops.h>
@@ -44,32 +45,39 @@
char parity = '\0', bits = '\0', flow = '\0';
char *s;
- if ((strstr(fw_getcmdline(), "console=")) == NULL) {
- s = fw_getenv("modetty0");
- if (s) {
- while (*s >= '0' && *s <= '9')
- baud = baud*10 + *s++ - '0';
- if (*s == ',')
- s++;
- if (*s)
- parity = *s++;
- if (*s == ',')
- s++;
- if (*s)
- bits = *s++;
- if (*s == ',')
- s++;
- if (*s == 'h')
- flow = 'r';
- }
- if (baud == 0)
- baud = 38400;
- if (parity != 'n' && parity != 'o' && parity != 'e')
- parity = 'n';
- if (bits != '7' && bits != '8')
- bits = '8';
- if (flow == '\0')
+ s = fw_getenv("modetty0");
+ if (s) {
+ while (*s >= '0' && *s <= '9')
+ baud = baud*10 + *s++ - '0';
+ if (*s == ',')
+ s++;
+ if (*s)
+ parity = *s++;
+ if (*s == ',')
+ s++;
+ if (*s)
+ bits = *s++;
+ if (*s == ',')
+ s++;
+ if (*s == 'h')
flow = 'r';
+ }
+ if (baud == 0)
+ baud = 38400;
+ if (parity != 'n' && parity != 'o' && parity != 'e')
+ parity = 'n';
+ if (bits != '7' && bits != '8')
+ bits = '8';
+ if (flow == '\0')
+ flow = 'r';
+
+ if ((strstr(fw_getcmdline(), "earlycon=")) == NULL) {
+ sprintf(console_string, "uart8250,io,0x3f8,%d%c%c", baud,
+ parity, bits);
+ setup_early_serial8250_console(console_string);
+ }
+
+ if ((strstr(fw_getcmdline(), "console=")) == NULL) {
sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
parity, bits, flow);
strcat(fw_getcmdline(), console_string);
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 0892575..ca3e3a4 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -1,25 +1,16 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2001 Ralf Baechle
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*
* Routines for generic manipulation of the interrupts found on the MIPS
- * Malta board.
- * The interrupt controller is located in the South Bridge a PIIX4 device
- * with two internal 82C95 interrupt controllers.
+ * Malta board. The interrupt controller is located in the South Bridge
+ * a PIIX4 device with two internal 82C95 interrupt controllers.
*/
#include <linux/init.h>
#include <linux/irq.h>
@@ -44,6 +35,7 @@
#include <asm/gic.h>
#include <asm/gcmpregs.h>
#include <asm/setup.h>
+#include <asm/rtlx.h>
int gcmp_present = -1;
static unsigned long _msc01_biu_base;
@@ -90,7 +82,7 @@
BONITO_PCIMAP_CFG = 0;
break;
default:
- printk(KERN_WARNING "Unknown system controller.\n");
+ pr_emerg("Unknown system controller.\n");
return -1;
}
return irq;
@@ -126,6 +118,11 @@
}
do_IRQ(MALTA_INT_BASE + irq);
+
+#ifdef MIPS_VPE_APSP_API
+ if (aprp_hook)
+ aprp_hook();
+#endif
}
static void malta_ipi_irqdispatch(void)
@@ -149,11 +146,11 @@
unsigned int intrcause, datalo, datahi;
struct pt_regs *regs = get_irq_regs();
- printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n");
- printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n"
- "Cause : %08lx\nbadVaddr : %08lx\n",
- regs->cp0_epc, regs->cp0_status,
- regs->cp0_cause, regs->cp0_badvaddr);
+ pr_emerg("CoreHI interrupt, shouldn't happen, we die here!\n");
+ pr_emerg("epc : %08lx\nStatus: %08lx\n"
+ "Cause : %08lx\nbadVaddr : %08lx\n",
+ regs->cp0_epc, regs->cp0_status,
+ regs->cp0_cause, regs->cp0_badvaddr);
/* Read all the registers and then print them as there is a
problem with interspersed printk's upsetting the Bonito controller.
@@ -171,8 +168,8 @@
intrcause = GT_READ(GT_INTRCAUSE_OFS);
datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
- printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause);
- printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n",
+ pr_emerg("GT_INTRCAUSE = %08x\n", intrcause);
+ pr_emerg("GT_CPUERR_ADDR = %02x%08x\n",
datahi, datalo);
break;
case MIPS_REVISION_SCON_BONITO:
@@ -184,14 +181,14 @@
intedge = BONITO_INTEDGE;
intsteer = BONITO_INTSTEER;
pcicmd = BONITO_PCICMD;
- printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr);
- printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten);
- printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol);
- printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge);
- printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer);
- printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd);
- printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr);
- printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat);
+ pr_emerg("BONITO_INTISR = %08x\n", intisr);
+ pr_emerg("BONITO_INTEN = %08x\n", inten);
+ pr_emerg("BONITO_INTPOL = %08x\n", intpol);
+ pr_emerg("BONITO_INTEDGE = %08x\n", intedge);
+ pr_emerg("BONITO_INTSTEER = %08x\n", intsteer);
+ pr_emerg("BONITO_PCICMD = %08x\n", pcicmd);
+ pr_emerg("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+ pr_emerg("BONITO_PCIMSTAT = %08x\n", pcimstat);
break;
}
@@ -313,6 +310,11 @@
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
+#ifdef MIPS_VPE_APSP_API
+ if (aprp_hook)
+ aprp_hook();
+#endif
+
scheduler_ipi();
return IRQ_HANDLED;
@@ -365,13 +367,13 @@
.flags = IRQF_NO_THREAD,
};
-static msc_irqmap_t __initdata msc_irqmap[] = {
+static msc_irqmap_t msc_irqmap[] __initdata = {
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
};
-static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
+static int msc_nr_irqs __initdata = ARRAY_SIZE(msc_irqmap);
-static msc_irqmap_t __initdata msc_eicirqmap[] = {
+static msc_irqmap_t msc_eicirqmap[] __initdata = {
{MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0},
@@ -384,7 +386,7 @@
{MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
};
-static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
+static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
/*
* This GIC specific tabular array defines the association between External
@@ -431,9 +433,12 @@
if (gcmp_present >= 0)
return gcmp_present;
- _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
- _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
- gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR;
+ _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR,
+ GCMP_ADDRSPACE_SZ);
+ _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE,
+ MSC01_BIU_ADDRSPACE_SZ);
+ gcmp_present = ((GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) ==
+ GCMP_BASE_ADDR);
if (gcmp_present)
pr_debug("GCMP present\n");
@@ -443,9 +448,8 @@
/* Return the number of IOCU's present */
int __init gcmp_niocu(void)
{
- return gcmp_present ?
- (GCMPGCB(GC) & GCMP_GCB_GC_NUMIOCU_MSK) >> GCMP_GCB_GC_NUMIOCU_SHF :
- 0;
+ return gcmp_present ? ((GCMPGCB(GC) & GCMP_GCB_GC_NUMIOCU_MSK) >>
+ GCMP_GCB_GC_NUMIOCU_SHF) : 0;
}
/* Set GCMP region attributes */
@@ -594,11 +598,14 @@
set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
}
/* Argh.. this really needs sorting out.. */
- printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status());
+ pr_info("CPU%d: status register was %08x\n",
+ smp_processor_id(), read_c0_status());
write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
- printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
+ pr_info("CPU%d: status register now %08x\n",
+ smp_processor_id(), read_c0_status());
write_c0_status(0x1100dc00);
- printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
+ pr_info("CPU%d: status register frc %08x\n",
+ smp_processor_id(), read_c0_status());
for (i = 0; i < nr_cpu_ids; i++) {
arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
GIC_RESCHED_INT(i), &irq_resched);
@@ -616,11 +623,15 @@
cpu_ipi_call_irq = MSC01E_INT_SW1;
} else {
if (cpu_has_vint) {
- set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
- set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+ set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ,
+ ipi_resched_dispatch);
+ set_vi_handler (MIPS_CPU_IPI_CALL_IRQ,
+ ipi_call_dispatch);
}
- cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+ cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
+ MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
+ MIPS_CPU_IPI_CALL_IRQ;
}
arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
@@ -630,9 +641,7 @@
void malta_be_init(void)
{
- if (gcmp_present) {
- /* Could change CM error mask register */
- }
+ /* Could change CM error mask register. */
}
@@ -712,14 +721,14 @@
if (cause < 16) {
unsigned long cca_bits = (cm_error >> 15) & 7;
unsigned long tr_bits = (cm_error >> 12) & 7;
- unsigned long mcmd_bits = (cm_error >> 7) & 0x1f;
+ unsigned long cmd_bits = (cm_error >> 7) & 0x1f;
unsigned long stag_bits = (cm_error >> 3) & 15;
unsigned long sport_bits = (cm_error >> 0) & 7;
snprintf(buf, sizeof(buf),
"CCA=%lu TR=%s MCmd=%s STag=%lu "
"SPort=%lu\n",
- cca_bits, tr[tr_bits], mcmd[mcmd_bits],
+ cca_bits, tr[tr_bits], mcmd[cmd_bits],
stag_bits, sport_bits);
} else {
/* glob state & sresp together */
@@ -728,7 +737,7 @@
unsigned long c1_bits = (cm_error >> 12) & 7;
unsigned long c0_bits = (cm_error >> 9) & 7;
unsigned long sc_bit = (cm_error >> 8) & 1;
- unsigned long mcmd_bits = (cm_error >> 3) & 0x1f;
+ unsigned long cmd_bits = (cm_error >> 3) & 0x1f;
unsigned long sport_bits = (cm_error >> 0) & 7;
snprintf(buf, sizeof(buf),
"C3=%s C2=%s C1=%s C0=%s SC=%s "
@@ -736,16 +745,16 @@
core[c3_bits], core[c2_bits],
core[c1_bits], core[c0_bits],
sc_bit ? "True" : "False",
- mcmd[mcmd_bits], sport_bits);
+ mcmd[cmd_bits], sport_bits);
}
ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >>
GCMP_GCB_GMEO_ERROR_2ND_SHF;
- printk("CM_ERROR=%08lx %s <%s>\n", cm_error,
+ pr_err("CM_ERROR=%08lx %s <%s>\n", cm_error,
causes[cause], buf);
- printk("CM_ADDR =%08lx\n", cm_addr);
- printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]);
+ pr_err("CM_ADDR =%08lx\n", cm_addr);
+ pr_err("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]);
/* reprime cause register */
GCMPGCB(GCMEC) = 0;
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 132f866..e1dd1c1 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -47,6 +47,7 @@
static struct plat_serial8250_port uart8250_data[] = {
SMC_PORT(0x3F8, 4),
SMC_PORT(0x2F8, 3),
+#ifndef CONFIG_MIPS_CMP
{
.mapbase = 0x1f000900, /* The CBUS UART */
.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
@@ -55,6 +56,7 @@
.flags = CBUS_UART_FLAGS,
.regshift = 3,
},
+#endif
{ },
};
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index a18af5f..3190099 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -42,8 +42,6 @@
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/maltaint.h>
-unsigned long cpu_khz;
-
static int mips_cpu_timer_irq;
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
@@ -168,11 +166,24 @@
return mips_cpu_timer_irq;
}
+static void __init init_rtc(void)
+{
+ /* stop the clock whilst setting it up */
+ CMOS_WRITE(RTC_SET | RTC_24H, RTC_CONTROL);
+
+ /* 32KHz time base */
+ CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_FREQ_SELECT);
+
+ /* start the clock */
+ CMOS_WRITE(RTC_24H, RTC_CONTROL);
+}
+
void __init plat_time_init(void)
{
unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
unsigned int freq;
+ init_rtc();
estimate_frequencies();
freq = mips_hpt_frequency;
@@ -182,7 +193,6 @@
freq = freqround(freq, 5000);
printk("CPU frequency %d.%02d MHz\n", freq/1000000,
(freq%1000000)*100/1000000);
- cpu_khz = freq / 1000;
mips_scroll_message();
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index be11420..071786f 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -21,5 +21,7 @@
obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o
obj-$(CONFIG_OF) += sead3.dtb.o
+CFLAGS_sead3-setup.o = -I$(src)/../../../scripts/dtc/libfdt
+
$(obj)/%.dtb: $(obj)/%.dts
$(call if_changed,dtc)
diff --git a/arch/mips/mti-sead3/sead3-pic32-bus.c b/arch/mips/mti-sead3/sead3-pic32-bus.c
index eb2bf93..3b12aa5 100644
--- a/arch/mips/mti-sead3/sead3-pic32-bus.c
+++ b/arch/mips/mti-sead3/sead3-pic32-bus.c
@@ -8,7 +8,6 @@
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/errno.h>
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index 928ba84..bf7fe48 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -4,13 +4,15 @@
* for more details.
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
*/
#include <linux/init.h>
+#include <linux/libfdt.h>
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/bootmem.h>
#include <asm/prom.h>
+#include <asm/fw/fw.h>
#include <asm/mips-boards/generic.h>
@@ -19,8 +21,73 @@
return "MIPS SEAD3";
}
+static uint32_t get_memsize_from_cmdline(void)
+{
+ int memsize = 0;
+ char *p = arcs_cmdline;
+ char *s = "memsize=";
+
+ p = strstr(p, s);
+ if (p) {
+ p += strlen(s);
+ memsize = memparse(p, NULL);
+ }
+
+ return memsize;
+}
+
+static uint32_t get_memsize_from_env(void)
+{
+ int memsize = 0;
+ char *p;
+
+ p = fw_getenv("memsize");
+ if (p)
+ memsize = memparse(p, NULL);
+
+ return memsize;
+}
+
+static uint32_t get_memsize(void)
+{
+ uint32_t memsize;
+
+ memsize = get_memsize_from_cmdline();
+ if (memsize)
+ return memsize;
+
+ return get_memsize_from_env();
+}
+
+static void __init parse_memsize_param(void)
+{
+ int offset;
+ const uint64_t *prop_value;
+ int prop_len;
+ uint32_t memsize = get_memsize();
+
+ if (!memsize)
+ return;
+
+ offset = fdt_path_offset(&__dtb_start, "/memory");
+ if (offset > 0) {
+ uint64_t new_value;
+ /*
+ * reg contains 2 32-bits BE values, offset and size. We just
+ * want to replace the size value without affecting the offset
+ */
+ prop_value = fdt_getprop(&__dtb_start, offset, "reg", &prop_len);
+ new_value = be64_to_cpu(*prop_value);
+ new_value = (new_value & ~0xffffffffllu) | memsize;
+ fdt_setprop_inplace_u64(&__dtb_start, offset, "reg", new_value);
+ }
+}
+
void __init plat_mem_setup(void)
{
+ /* allow command line/bootloader env to override memory size in DT */
+ parse_memsize_param();
+
/*
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
@@ -30,16 +97,15 @@
void __init device_tree_init(void)
{
- unsigned long base, size;
-
if (!initial_boot_params)
return;
- base = virt_to_phys((void *)initial_boot_params);
- size = be32_to_cpu(initial_boot_params->totalsize);
-
- /* Before we do anything, lets reserve the dt blob */
- reserve_bootmem(base, size, BOOTMEM_DEFAULT);
-
- unflatten_device_tree();
+ unflatten_and_copy_device_tree();
}
+
+static int __init customize_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ return 0;
+}
+arch_initcall(customize_machine);
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
index 552d26c..678d03d 100644
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -13,8 +13,6 @@
#include <asm/irq.h>
#include <asm/mips-boards/generic.h>
-unsigned long cpu_khz;
-
static int mips_cpu_timer_irq;
static int mips_cpu_perf_irq;
@@ -109,8 +107,6 @@
pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000),
(est_freq % 1000000) * 100 / 1000000);
- cpu_khz = est_freq / 1000;
-
mips_scroll_message();
plat_perf_setup();
diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/mti-sead3/sead3.dts
index 658f437..e4b317d 100644
--- a/arch/mips/mti-sead3/sead3.dts
+++ b/arch/mips/mti-sead3/sead3.dts
@@ -15,10 +15,6 @@
};
};
- chosen {
- bootargs = "console=ttyS1,38400 rootdelay=10 root=/dev/sda3";
- };
-
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 852a4ee..4eb683a 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -28,6 +28,15 @@
pointer to the kernel. The corresponding DTS file is at
arch/mips/netlogic/dts/xlp_fvp.dts
+config DT_XLP_GVP
+ bool "Built-in device tree for XLP GVP boards"
+ default y
+ help
+ Add an FDT blob for XLP GVP board into the kernel.
+ This DTB will be used if the firmware does not pass in a DTB
+ pointer to the kernel. The corresponding DTS file is at
+ arch/mips/netlogic/dts/xlp_gvp.dts
+
config NLM_MULTINODE
bool "Support for multi-chip boards"
depends on NLM_XLP_BOARD
diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c
index 1902fa2..769f930 100644
--- a/arch/mips/netlogic/common/earlycons.c
+++ b/arch/mips/netlogic/common/earlycons.c
@@ -37,9 +37,11 @@
#include <asm/mipsregs.h>
#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
#if defined(CONFIG_CPU_XLP)
#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
#include <asm/netlogic/xlp-hal/uart.h>
#elif defined(CONFIG_CPU_XLR)
#include <asm/netlogic/xlr/iomap.h>
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 1c7e3a1..5afc4b7 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -180,6 +180,7 @@
#endif
}
+
void nlm_setup_pic_irq(int node, int picirq, int irq, int irt)
{
struct nlm_pic_irq *pic_data;
@@ -207,32 +208,32 @@
static void nlm_init_node_irqs(int node)
{
- int i, irt;
- uint64_t irqmask;
struct nlm_soc_info *nodep;
+ int i, irt;
pr_info("Init IRQ for node %d\n", node);
nodep = nlm_get_node(node);
- irqmask = PERCPU_IRQ_MASK;
+ nodep->irqmask = PERCPU_IRQ_MASK;
for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) {
irt = nlm_irq_to_irt(i);
- if (irt == -1)
+ if (irt == -1) /* unused irq */
continue;
- nlm_setup_pic_irq(node, i, i, irt);
- /* set interrupts to first cpu in node */
+ nodep->irqmask |= 1ull << i;
+ if (irt == -2) /* not a direct PIC irq */
+ continue;
+
nlm_pic_init_irt(nodep->picbase, irt, i,
- node * NLM_CPUS_PER_NODE, 0);
- irqmask |= (1ull << i);
+ node * nlm_threads_per_node(), 0);
+ nlm_setup_pic_irq(node, i, i, irt);
}
- nodep->irqmask = irqmask;
}
void nlm_smp_irq_init(int hwcpuid)
{
int node, cpu;
- node = hwcpuid / NLM_CPUS_PER_NODE;
- cpu = hwcpuid % NLM_CPUS_PER_NODE;
+ node = nlm_cpuid_to_node(hwcpuid);
+ cpu = hwcpuid % nlm_threads_per_node();
if (cpu == 0 && node != 0)
nlm_init_node_irqs(node);
@@ -256,13 +257,23 @@
return;
}
+#if defined(CONFIG_PCI_MSI) && defined(CONFIG_CPU_XLP)
+ /* PCI interrupts need a second level dispatch for MSI bits */
+ if (i >= PIC_PCIE_LINK_MSI_IRQ(0) && i <= PIC_PCIE_LINK_MSI_IRQ(3)) {
+ nlm_dispatch_msi(node, i);
+ return;
+ }
+ if (i >= PIC_PCIE_MSIX_IRQ(0) && i <= PIC_PCIE_MSIX_IRQ(3)) {
+ nlm_dispatch_msix(node, i);
+ return;
+ }
+
+#endif
/* top level irq handling */
do_IRQ(nlm_irq_to_xirq(node, i));
}
#ifdef CONFIG_OF
-static struct irq_domain *xlp_pic_domain;
-
static const struct irq_domain_ops xlp_pic_irq_domain_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
@@ -271,8 +282,9 @@
struct device_node *parent)
{
const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1;
+ struct irq_domain *xlp_pic_domain;
struct resource res;
- int socid, ret;
+ int socid, ret, bus;
/* we need a hack to get the PIC's SoC chip id */
ret = of_address_to_resource(node, 0, &res);
@@ -280,7 +292,34 @@
pr_err("PIC %s: reg property not found!\n", node->name);
return -EINVAL;
}
- socid = (res.start >> 18) & 0x3;
+
+ if (cpu_is_xlp9xx()) {
+ bus = (res.start >> 20) & 0xf;
+ for (socid = 0; socid < NLM_NR_NODES; socid++) {
+ if (!nlm_node_present(socid))
+ continue;
+ if (nlm_get_node(socid)->socbus == bus)
+ break;
+ }
+ if (socid == NLM_NR_NODES) {
+ pr_err("PIC %s: Node mapping for bus %d not found!\n",
+ node->name, bus);
+ return -EINVAL;
+ }
+ } else {
+ socid = (res.start >> 18) & 0x3;
+ if (!nlm_node_present(socid)) {
+ pr_err("PIC %s: node %d does not exist!\n",
+ node->name, socid);
+ return -EINVAL;
+ }
+ }
+
+ if (!nlm_node_present(socid)) {
+ pr_err("PIC %s: node %d does not exist!\n", node->name, socid);
+ return -EINVAL;
+ }
+
xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs,
nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE,
&xlp_pic_irq_domain_ops, NULL);
@@ -288,8 +327,7 @@
pr_err("PIC %s: Creating legacy domain failed!\n", node->name);
return -EINVAL;
}
- pr_info("Node %d: IRQ domain created for PIC@%pa\n", socid,
- &res.start);
+ pr_info("Node %d: IRQ domain created for PIC@%pR\n", socid, &res);
return 0;
}
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S
index adb1828..b231fe1 100644
--- a/arch/mips/netlogic/common/reset.S
+++ b/arch/mips/netlogic/common/reset.S
@@ -32,10 +32,10 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
+#include <asm/cacheops.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
@@ -50,8 +50,8 @@
#include <asm/netlogic/xlp-hal/cpucontrol.h>
#define CP0_EBASE $15
-#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
- XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
+#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
+ XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \
SYS_CPU_NONCOHERENT_MODE * 4
/* Enable XLP features and workarounds in the LSU */
@@ -74,35 +74,55 @@
.endm
/*
- * Low level flush for L1D cache on XLP, the normal cache ops does
- * not do the complete and correct cache flush.
+ * L1D cache has to be flushed before enabling threads in XLP.
+ * On XLP8xx/XLP3xx, we do a low level flush using processor control
+ * registers. On XLPII CPUs, usual cache instructions work.
*/
.macro xlp_flush_l1_dcache
+ mfc0 t0, CP0_EBASE, 0
+ andi t0, t0, 0xff00
+ slt t1, t0, 0x1200
+ beqz t1, 15f
+ nop
+
+ /* XLP8xx low level cache flush */
li t0, LSU_DEBUG_DATA0
li t1, LSU_DEBUG_ADDR
li t2, 0 /* index */
li t3, 0x1000 /* loop count */
-1:
+11:
sll v0, t2, 5
mtcr zero, t0
ori v1, v0, 0x3 /* way0 | write_enable | write_active */
mtcr v1, t1
-2:
+12:
mfcr v1, t1
andi v1, 0x1 /* wait for write_active == 0 */
- bnez v1, 2b
+ bnez v1, 12b
nop
mtcr zero, t0
ori v1, v0, 0x7 /* way1 | write_enable | write_active */
mtcr v1, t1
-3:
+13:
mfcr v1, t1
andi v1, 0x1 /* wait for write_active == 0 */
- bnez v1, 3b
+ bnez v1, 13b
nop
addi t2, 1
- bne t3, t2, 1b
+ bne t3, t2, 11b
nop
+ b 17f
+ nop
+
+ /* XLPII CPUs, Invalidate all 64k of L1 D-cache */
+15:
+ li t0, 0x80000000
+ li t1, 0x80010000
+16: cache Index_Writeback_Inv_D, 0(t0)
+ addiu t0, t0, 32
+ bne t0, t1, 16b
+ nop
+17:
.endm
/*
@@ -138,6 +158,13 @@
nop
1: /* Entry point on core wakeup */
+ mfc0 t0, CP0_EBASE, 0 /* processor ID */
+ andi t0, 0xff00
+ li t1, 0x1500 /* XLP 9xx */
+ beq t0, t1, 2f /* does not need to set coherent */
+ nop
+
+ /* set bit in SYS coherent register for the core */
mfc0 t0, CP0_EBASE, 1
mfc0 t1, CP0_EBASE, 1
srl t1, 5
@@ -149,7 +176,7 @@
li t1, 0x1
sll t0, t1, t0
nor t0, t0, zero /* t0 <- ~(1 << core) */
- li t2, SYS_CPU_COHERENT_BASE(0)
+ li t2, SYS_CPU_COHERENT_BASE
add t2, t2, t3 /* t2 <- SYS offset for node */
lw t1, 0(t2)
and t1, t1, t0
@@ -159,13 +186,13 @@
lw t1, 0(t2)
sync
+2:
/* Configure LSU on Non-0 Cores. */
xlp_config_lsu
/* FALL THROUGH */
/*
- * Wake up sibling threads from the initial thread in
- * a core.
+ * Wake up sibling threads from the initial thread in a core.
*/
EXPORT(nlm_boot_siblings)
/* core L1D flush before enable threads */
@@ -181,8 +208,10 @@
/*
* The new hardware thread starts at the next instruction
* For all the cases other than core 0 thread 0, we will
- * jump to the secondary wait function.
- */
+ * jump to the secondary wait function.
+
+ * NOTE: All GPR contents are lost after the mtcr above!
+ */
mfc0 v0, CP0_EBASE, 1
andi v0, 0x3ff /* v0 <- node/core */
@@ -196,7 +225,7 @@
#endif
mtc0 t1, CP0_STATUS
- /* mark CPU ready, careful here, previous mtcr trashed registers */
+ /* mark CPU ready */
li t3, CKSEG1ADDR(RESET_DATA_PHYS)
ADDIU t1, t3, BOOT_CPU_READY
sll v1, v0, 2
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index c0eded0..6baae15 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -63,7 +63,7 @@
uint64_t picbase;
cpu = cpu_logical_map(logical_cpu);
- node = cpu / NLM_CPUS_PER_NODE;
+ node = nlm_cpuid_to_node(cpu);
picbase = nlm_get_node(node)->picbase;
if (action & SMP_CALL_FUNCTION)
@@ -152,7 +152,7 @@
int cpu, node;
cpu = cpu_logical_map(logical_cpu);
- node = cpu / NLM_CPUS_PER_NODE;
+ node = nlm_cpuid_to_node(logical_cpu);
nlm_next_sp = (unsigned long)__KSTK_TOS(idle);
nlm_next_gp = (unsigned long)task_thread_info(idle);
@@ -164,7 +164,7 @@
void __init nlm_smp_setup(void)
{
unsigned int boot_cpu;
- int num_cpus, i, ncore;
+ int num_cpus, i, ncore, node;
volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
char buf[64];
@@ -187,6 +187,8 @@
__cpu_number_map[i] = num_cpus;
__cpu_logical_map[num_cpus] = i;
set_cpu_possible(num_cpus, true);
+ node = nlm_cpuid_to_node(i);
+ cpumask_set_cpu(num_cpus, &nlm_get_node(node)->cpumask);
++num_cpus;
}
}
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index aa6cff0..8597657 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -32,7 +32,6 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
@@ -98,7 +97,7 @@
* In case of RMIboot bootloader which is used on XLR boards, the CPUs
* be already woken up and waiting in bootloader code.
* This will get them out of the bootloader code and into linux. Needed
- * because the bootloader area will be taken and initialized by linux.
+ * because the bootloader area will be taken and initialized by linux.
*/
NESTED(nlm_rmiboot_preboot, 16, sp)
mfc0 t0, $15, 1 /* read ebase */
@@ -133,6 +132,7 @@
or t1, t2, v1 /* put in new value */
mtcr t1, t0 /* update core control */
+ /* wait for NMI to hit */
1: wait
b 1b
nop
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index 0b9be5f..25c8e87 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o
obj-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb.o
+obj-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb.o
diff --git a/arch/mips/netlogic/dts/xlp_gvp.dts b/arch/mips/netlogic/dts/xlp_gvp.dts
new file mode 100644
index 0000000..047d27f
--- /dev/null
+++ b/arch/mips/netlogic/dts/xlp_gvp.dts
@@ -0,0 +1,76 @@
+/*
+ * XLP9XX Device Tree Source for GVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-GVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x112100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <125000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ pic: pic@4000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x110000 0x200>;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index 8316d54..5754097 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -42,13 +42,18 @@
#include <asm/prom.h>
extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
- __dtb_xlp_fvp_begin[], __dtb_start[];
+ __dtb_xlp_fvp_begin[], __dtb_xlp_gvp_begin[], __dtb_start[];
static void *xlp_fdt_blob;
void __init *xlp_dt_init(void *fdtp)
{
if (!fdtp) {
switch (current_cpu_data.processor_id & 0xff00) {
+#ifdef CONFIG_DT_XLP_GVP
+ case PRID_IMP_NETLOGIC_XLP9XX:
+ fdtp = __dtb_xlp_gvp_begin;
+ break;
+#endif
#ifdef CONFIG_DT_XLP_FVP
case PRID_IMP_NETLOGIC_XLP2XX:
fdtp = __dtb_xlp_fvp_begin;
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 56c50ba..997cd9e 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -57,6 +57,10 @@
nodep->sysbase = nlm_get_sys_regbase(node);
nodep->picbase = nlm_get_pic_regbase(node);
nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+ if (cpu_is_xlp9xx())
+ nodep->socbus = xlp9xx_get_socbus(node);
+ else
+ nodep->socbus = 0;
spin_lock_init(&nodep->piclock);
}
@@ -65,6 +69,26 @@
uint64_t pcibase;
int devoff, irt;
+ /* bypass for 9xx */
+ if (cpu_is_xlp9xx()) {
+ switch (irq) {
+ case PIC_9XX_XHCI_0_IRQ:
+ return 114;
+ case PIC_9XX_XHCI_1_IRQ:
+ return 115;
+ case PIC_UART_0_IRQ:
+ return 133;
+ case PIC_UART_1_IRQ:
+ return 134;
+ case PIC_PCIE_LINK_LEGACY_IRQ(0):
+ case PIC_PCIE_LINK_LEGACY_IRQ(1):
+ case PIC_PCIE_LINK_LEGACY_IRQ(2):
+ case PIC_PCIE_LINK_LEGACY_IRQ(3):
+ return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
+ }
+ return -1;
+ }
+
devoff = 0;
switch (irq) {
case PIC_UART_0_IRQ:
@@ -135,9 +159,17 @@
case PIC_I2C_3_IRQ:
irt = irt + 3; break;
}
- } else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
+ } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
+ irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
/* HW bug, PCI IRT entries are bad on early silicon, fix */
- irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
+ irt = PIC_IRT_PCIE_LINK_INDEX(irq -
+ PIC_PCIE_LINK_LEGACY_IRQ_BASE);
+ } else if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) &&
+ irq <= PIC_PCIE_LINK_MSI_IRQ(3)) {
+ irt = -2;
+ } else if (irq >= PIC_PCIE_MSIX_IRQ(0) &&
+ irq <= PIC_PCIE_MSIX_IRQ(3)) {
+ irt = -2;
} else {
irt = -1;
}
@@ -151,7 +183,10 @@
uint64_t num, sysbase;
sysbase = nlm_get_node(node)->sysbase;
- rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+ if (cpu_is_xlp9xx())
+ rstval = nlm_read_sys_reg(sysbase, SYS_9XX_POWER_ON_RESET_CFG);
+ else
+ rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
if (cpu_is_xlpii()) {
num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
denom = 3;
@@ -265,6 +300,10 @@
unsigned int nlm_get_pic_frequency(int node)
{
+ /* TODO Has to calculate freq as like 2xx */
+ if (cpu_is_xlp9xx())
+ return 250000000;
+
if (cpu_is_xlpii())
return nlm_2xx_get_pic_frequency(node);
else
@@ -284,21 +323,33 @@
{
uint64_t bridgebase, base, lim;
uint32_t val;
+ unsigned int barreg, limreg, xlatreg;
int i, node, rv;
/* Look only at mapping on Node 0, we don't handle crazy configs */
bridgebase = nlm_get_bridge_regbase(0);
rv = 0;
for (i = 0; i < 8; i++) {
- val = nlm_read_bridge_reg(bridgebase,
- BRIDGE_DRAM_NODE_TRANSLN(i));
- node = (val >> 1) & 0x3;
- if (n >= 0 && n != node)
- continue;
- val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i));
+ if (cpu_is_xlp9xx()) {
+ barreg = BRIDGE_9XX_DRAM_BAR(i);
+ limreg = BRIDGE_9XX_DRAM_LIMIT(i);
+ xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i);
+ } else {
+ barreg = BRIDGE_DRAM_BAR(i);
+ limreg = BRIDGE_DRAM_LIMIT(i);
+ xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i);
+ }
+ if (n >= 0) {
+ /* node specified, get node mapping of BAR */
+ val = nlm_read_bridge_reg(bridgebase, xlatreg);
+ node = (val >> 1) & 0x3;
+ if (n != node)
+ continue;
+ }
+ val = nlm_read_bridge_reg(bridgebase, barreg);
val = (val >> 12) & 0xfffff;
base = (uint64_t) val << 20;
- val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i));
+ val = nlm_read_bridge_reg(bridgebase, limreg);
val = (val >> 12) & 0xfffff;
if (val == 0) /* BAR not used */
continue;
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 54e75c7..8c60a2d 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -51,12 +51,16 @@
struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
cpumask_t nlm_cpumask = CPU_MASK_CPU0;
unsigned int nlm_threads_per_core;
+unsigned int xlp_cores_per_node;
static void nlm_linux_exit(void)
{
uint64_t sysbase = nlm_get_node(0)->sysbase;
- nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
+ if (cpu_is_xlp9xx())
+ nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1);
+ else
+ nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
for ( ; ; )
cpu_wait();
}
@@ -92,6 +96,14 @@
void __init plat_mem_setup(void)
{
+#ifdef CONFIG_SMP
+ nlm_wakeup_secondary_cpus();
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ register_smp_ops(&nlm_smp_ops);
+#endif
_machine_restart = (void (*)(char *))nlm_linux_exit;
_machine_halt = nlm_linux_exit;
pm_power_off = nlm_linux_exit;
@@ -110,6 +122,7 @@
const char *get_system_type(void)
{
switch (read_c0_prid() & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLP9XX:
case PRID_IMP_NETLOGIC_XLP2XX:
return "Broadcom XLPII Series";
default:
@@ -149,6 +162,10 @@
void *reset_vec;
nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
+ if (cpu_is_xlp9xx())
+ xlp_cores_per_node = 32;
+ else
+ xlp_cores_per_node = 8;
nlm_init_boot_cpu();
xlp_mmu_init();
nlm_node_init(0);
@@ -162,11 +179,5 @@
#ifdef CONFIG_SMP
cpumask_setall(&nlm_cpumask);
- nlm_wakeup_secondary_cpus();
-
- /* update TLB size after waking up threads */
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
-
- register_smp_ops(&nlm_smp_ops);
#endif
}
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
index 36e9c22..17ade1c 100644
--- a/arch/mips/netlogic/xlp/usb-init-xlp2.c
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -37,6 +37,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pci_ids.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
@@ -83,12 +84,14 @@
#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_xlpii_get_usb_pcibase(node, inst) \
- nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_pcibase(node, inst) \
+ nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_USB_OFFSET(node, inst) : \
+ XLP2XX_IO_USB_OFFSET(node, inst))
#define nlm_xlpii_get_usb_regbase(node, inst) \
(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-static void xlpii_usb_ack(struct irq_data *data)
+static void xlp2xx_usb_ack(struct irq_data *data)
{
u64 port_addr;
@@ -109,6 +112,29 @@
nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
}
+static void xlp9xx_usb_ack(struct irq_data *data)
+{
+ u64 port_addr;
+ int node, irq;
+
+ /* Find the node and irq on the node */
+ irq = data->irq % NLM_IRQS_PER_NODE;
+ node = data->irq / NLM_IRQS_PER_NODE;
+
+ switch (irq) {
+ case PIC_9XX_XHCI_0_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 1);
+ break;
+ case PIC_9XX_XHCI_1_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 2);
+ break;
+ default:
+ pr_err("No matching USB irq %d node %d!\n", irq, node);
+ return;
+ }
+ nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
static void nlm_xlpii_usb_hw_reset(int node, int port)
{
u64 port_addr, xhci_base, pci_base;
@@ -178,17 +204,33 @@
static int __init nlm_platform_xlpii_usb_init(void)
{
+ int node;
+
if (!cpu_is_xlpii())
return 0;
- pr_info("Initializing 2XX USB Interface\n");
- nlm_xlpii_usb_hw_reset(0, 1);
- nlm_xlpii_usb_hw_reset(0, 2);
- nlm_xlpii_usb_hw_reset(0, 3);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack);
+ if (!cpu_is_xlp9xx()) {
+ /* XLP 2XX single node */
+ pr_info("Initializing 2XX USB Interface\n");
+ nlm_xlpii_usb_hw_reset(0, 1);
+ nlm_xlpii_usb_hw_reset(0, 2);
+ nlm_xlpii_usb_hw_reset(0, 3);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack);
+ return 0;
+ }
+ /* XLP 9XX, multi-node */
+ pr_info("Initializing 9XX USB Interface\n");
+ for (node = 0; node < NLM_NR_NODES; node++) {
+ if (!nlm_node_present(node))
+ continue;
+ nlm_xlpii_usb_hw_reset(node, 1);
+ nlm_xlpii_usb_hw_reset(node, 2);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
+ }
return 0;
}
@@ -196,8 +238,26 @@
static u64 xlp_usb_dmamask = ~(u32)0;
-/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */
-static void nlm_usb_fixup_final(struct pci_dev *dev)
+/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */
+static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
+{
+ int node;
+
+ node = xlp_socdev_to_node(dev);
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ switch (dev->devfn) {
+ case 0x21:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ);
+ break;
+ case 0x22:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
+ break;
+ }
+}
+
+/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */
+static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev)
{
dev->dev.dma_mask = &xlp_usb_dmamask;
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -214,5 +274,7 @@
}
}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI,
+ nlm_xlp9xx_usb_fixup_final);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
- nlm_usb_fixup_final);
+ nlm_xlp2xx_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index 682d563..9a92617 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -32,7 +32,6 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/threads.h>
@@ -47,14 +46,14 @@
#include <asm/netlogic/mips-extns.h>
#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/sys.h>
static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
{
uint32_t coremask, value;
- int count;
+ int count, resetreg;
coremask = (1 << core);
@@ -65,12 +64,24 @@
nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
}
- /* Remove CPU Reset */
- value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET);
- value &= ~coremask;
- nlm_write_sys_reg(sysbase, SYS_CPU_RESET, value);
+ /* On 9XX, mark coherent first */
+ if (cpu_is_xlp9xx()) {
+ value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE);
+ value &= ~coremask;
+ nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value);
+ }
- /* Poll for CPU to mark itself coherent */
+ /* Remove CPU Reset */
+ resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET;
+ value = nlm_read_sys_reg(sysbase, resetreg);
+ value &= ~coremask;
+ nlm_write_sys_reg(sysbase, resetreg, value);
+
+ /* We are done on 9XX */
+ if (cpu_is_xlp9xx())
+ return 1;
+
+ /* Poll for CPU to mark itself coherent on other type of XLP */
count = 100000;
do {
value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
@@ -84,7 +95,7 @@
volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
int i, count, notready;
- count = 0x20000000;
+ count = 0x800000;
do {
notready = nlm_threads_per_core;
for (i = 0; i < nlm_threads_per_core; i++)
@@ -98,27 +109,62 @@
static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
{
struct nlm_soc_info *nodep;
- uint64_t syspcibase;
- uint32_t syscoremask;
+ uint64_t syspcibase, fusebase;
+ uint32_t syscoremask, mask, fusemask;
int core, n, cpu;
for (n = 0; n < NLM_NR_NODES; n++) {
- syspcibase = nlm_get_sys_pcibase(n);
- if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
- break;
-
- /* read cores in reset from SYS */
- if (n != 0)
+ if (n != 0) {
+ /* check if node exists and is online */
+ if (cpu_is_xlp9xx()) {
+ int b = xlp9xx_get_socbus(n);
+ pr_info("Node %d SoC PCI bus %d.\n", n, b);
+ if (b == 0)
+ break;
+ } else {
+ syspcibase = nlm_get_sys_pcibase(n);
+ if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
+ break;
+ }
nlm_node_init(n);
- nodep = nlm_get_node(n);
- syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET);
- /* The boot cpu */
- if (n == 0) {
- syscoremask |= 1;
- nodep->coremask = 1;
}
- for (core = 0; core < NLM_CORES_PER_NODE; core++) {
+ /* read cores in reset from SYS */
+ nodep = nlm_get_node(n);
+
+ if (cpu_is_xlp9xx()) {
+ fusebase = nlm_get_fuse_regbase(n);
+ fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
+ mask = 0xfffff;
+ } else {
+ fusemask = nlm_read_sys_reg(nodep->sysbase,
+ SYS_EFUSE_DEVICE_CFG_STATUS0);
+ switch (read_c0_prid() & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLP3XX:
+ mask = 0xf;
+ break;
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ mask = 0x3;
+ break;
+ case PRID_IMP_NETLOGIC_XLP8XX:
+ default:
+ mask = 0xff;
+ break;
+ }
+ }
+
+ /*
+ * Fused out cores are set in the fusemask, and the remaining
+ * cores are renumbered to range 0 .. nactive-1
+ */
+ syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
+
+ /* The boot cpu */
+ if (n == 0)
+ nodep->coremask = 1;
+
+ pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
+ for (core = 0; core < nlm_cores_per_node(); core++) {
/* we will be on node 0 core 0 */
if (n == 0 && core == 0)
continue;
@@ -128,7 +174,7 @@
continue;
/* see if at least the first hw thread is enabled */
- cpu = (n * NLM_CORES_PER_NODE + core)
+ cpu = (n * nlm_cores_per_node() + core)
* NLM_THREADS_PER_CORE;
if (!cpumask_test_cpu(cpu, wakeup_mask))
continue;
@@ -141,7 +187,8 @@
nodep->coremask |= 1u << core;
/* spin until the hw threads sets their ready */
- wait_for_cpus(cpu, 0);
+ if (!wait_for_cpus(cpu, 0))
+ pr_err("Node %d : timeout core %d\n", n, core);
}
}
}
@@ -153,7 +200,8 @@
* first wakeup core 0 threads
*/
xlp_boot_core0_siblings();
- wait_for_cpus(0, 0);
+ if (!wait_for_cpus(0, 0))
+ pr_err("Node 0 : timeout core 0\n");
/* now get other cores out of reset */
xlp_enable_secondary_cores(&nlm_cpumask);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 7b96a91..4785932 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -23,7 +23,7 @@
#include <asm/netlogic/xlr/pic.h>
#include <asm/netlogic/xlr/xlr.h>
-unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
{
uint64_t uartbase;
unsigned int value;
@@ -41,7 +41,7 @@
return value;
}
-void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
{
uint64_t uartbase;
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 921be5f..d118b9a 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -60,25 +60,6 @@
struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
cpumask_t nlm_cpumask = CPU_MASK_CPU0;
-static void __init nlm_early_serial_setup(void)
-{
- struct uart_port s;
- unsigned long uart_base;
-
- uart_base = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
- memset(&s, 0, sizeof(s));
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
- s.iotype = UPIO_MEM32;
- s.regshift = 2;
- s.irq = PIC_UART_0_IRQ;
- s.uartclk = PIC_CLK_HZ;
- s.serial_in = nlm_xlr_uart_in;
- s.serial_out = nlm_xlr_uart_out;
- s.mapbase = uart_base;
- s.membase = (unsigned char __iomem *)uart_base;
- early_serial_setup(&s);
-}
-
static void nlm_linux_exit(void)
{
uint64_t gpiobase;
@@ -214,7 +195,6 @@
memcpy(reset_vec, (void *)nlm_reset_entry,
(nlm_reset_entry_end - nlm_reset_entry));
- nlm_early_serial_setup();
build_arcs_cmdline(argv);
prom_add_memory();
diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c
index 9fb81fa..d61cba1 100644
--- a/arch/mips/netlogic/xlr/wakeup.c
+++ b/arch/mips/netlogic/xlr/wakeup.c
@@ -32,7 +32,6 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/threads.h>
@@ -70,7 +69,7 @@
/* Fill up the coremask early */
nodep->coremask = 1;
- for (i = 1; i < NLM_CORES_PER_NODE; i++) {
+ for (i = 1; i < nlm_cores_per_node(); i++) {
for (j = 1000000; j > 0; j--) {
if (cpu_ready[i * NLM_THREADS_PER_CORE])
break;
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 4d1736f..2a86e38 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -86,6 +86,8 @@
case CPU_34K:
case CPU_1004K:
case CPU_74K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
case CPU_LOONGSON1:
case CPU_SB1:
case CPU_SB1A:
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 3a2b6e9..4d94d75 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -376,6 +376,14 @@
op_model_mipsxx_ops.cpu_type = "mips/74K";
break;
+ case CPU_INTERAPTIV:
+ op_model_mipsxx_ops.cpu_type = "mips/interAptiv";
+ break;
+
+ case CPU_PROAPTIV:
+ op_model_mipsxx_ops.cpu_type = "mips/proAptiv";
+ break;
+
case CPU_5KC:
op_model_mipsxx_ops.cpu_type = "mips/5K";
break;
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 719e455..137f2a6 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -60,4 +60,5 @@
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CAVIUM_OCTEON_SOC) += msi-octeon.o
+obj-$(CONFIG_CPU_XLP) += msi-xlp.o
endif
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index df36e23..7a0eda7 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -54,6 +54,7 @@
static void malta_piix_func0_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
+ u32 reg_val32;
/* PIIX PIRQC[A:D] irq mappings */
static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
0, 0, 0, 3,
@@ -83,6 +84,16 @@
pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val |
PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK);
}
+
+ /* Mux SERIRQ to its pin */
+ pci_read_config_dword(pdev, PIIX4_FUNC0_GENCFG, ®_val32);
+ pci_write_config_dword(pdev, PIIX4_FUNC0_GENCFG,
+ reg_val32 | PIIX4_FUNC0_GENCFG_SERIRQ);
+
+ /* Enable SERIRQ */
+ pci_read_config_byte(pdev, PIIX4_FUNC0_SERIRQC, ®_val);
+ reg_val |= PIIX4_FUNC0_SERIRQC_EN | PIIX4_FUNC0_SERIRQC_CONT;
+ pci_write_config_byte(pdev, PIIX4_FUNC0_SERIRQC, reg_val);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
index d0f6ecb..7fcafd5 100644
--- a/arch/mips/pci/fixup-rc32434.c
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -27,7 +27,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/irq.h>
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index 1441bec..8feae91 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -8,7 +8,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/init.h>
#include <linux/pci.h>
/*
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
new file mode 100644
index 0000000..afd8405
--- /dev/null
+++ b/arch/mips/pci/msi-xlp.c
@@ -0,0 +1,494 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/msi.h>
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/pcibus.h>
+#include <asm/netlogic/xlp-hal/bridge.h>
+
+#define XLP_MSIVEC_PER_LINK 32
+#define XLP_MSIXVEC_TOTAL 32
+#define XLP_MSIXVEC_PER_LINK 8
+
+/* 128 MSI irqs per node, mapped starting at NLM_MSI_VEC_BASE */
+static inline int nlm_link_msiirq(int link, int msivec)
+{
+ return NLM_MSI_VEC_BASE + link * XLP_MSIVEC_PER_LINK + msivec;
+}
+
+static inline int nlm_irq_msivec(int irq)
+{
+ return irq % XLP_MSIVEC_PER_LINK;
+}
+
+static inline int nlm_irq_msilink(int irq)
+{
+ return (irq % (XLP_MSIVEC_PER_LINK * PCIE_NLINKS)) /
+ XLP_MSIVEC_PER_LINK;
+}
+
+/*
+ * Only 32 MSI-X vectors are possible because there are only 32 PIC
+ * interrupts for MSI. We split them statically and use 8 MSI-X vectors
+ * per link - this keeps the allocation and lookup simple.
+ */
+static inline int nlm_link_msixirq(int link, int bit)
+{
+ return NLM_MSIX_VEC_BASE + link * XLP_MSIXVEC_PER_LINK + bit;
+}
+
+static inline int nlm_irq_msixvec(int irq)
+{
+ return irq % XLP_MSIXVEC_TOTAL; /* works when given xirq */
+}
+
+static inline int nlm_irq_msixlink(int irq)
+{
+ return nlm_irq_msixvec(irq) / XLP_MSIXVEC_PER_LINK;
+}
+
+/*
+ * Per link MSI and MSI-X information, set as IRQ handler data for
+ * MSI and MSI-X interrupts.
+ */
+struct xlp_msi_data {
+ struct nlm_soc_info *node;
+ uint64_t lnkbase;
+ uint32_t msi_enabled_mask;
+ uint32_t msi_alloc_mask;
+ uint32_t msix_alloc_mask;
+ spinlock_t msi_lock;
+};
+
+/*
+ * MSI Chip definitions
+ *
+ * On XLP, there is a PIC interrupt associated with each PCIe link on the
+ * chip (which appears as a PCI bridge to us). This gives us 32 MSI irqa
+ * per link and 128 overall.
+ *
+ * When a device connected to the link raises a MSI interrupt, we get a
+ * link interrupt and we then have to look at PCIE_MSI_STATUS register at
+ * the bridge to map it to the IRQ
+ */
+static void xlp_msi_enable(struct irq_data *d)
+{
+ struct xlp_msi_data *md = irq_data_get_irq_handler_data(d);
+ unsigned long flags;
+ int vec;
+
+ vec = nlm_irq_msivec(d->irq);
+ spin_lock_irqsave(&md->msi_lock, flags);
+ md->msi_enabled_mask |= 1u << vec;
+ nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
+ spin_unlock_irqrestore(&md->msi_lock, flags);
+}
+
+static void xlp_msi_disable(struct irq_data *d)
+{
+ struct xlp_msi_data *md = irq_data_get_irq_handler_data(d);
+ unsigned long flags;
+ int vec;
+
+ vec = nlm_irq_msivec(d->irq);
+ spin_lock_irqsave(&md->msi_lock, flags);
+ md->msi_enabled_mask &= ~(1u << vec);
+ nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
+ spin_unlock_irqrestore(&md->msi_lock, flags);
+}
+
+static void xlp_msi_mask_ack(struct irq_data *d)
+{
+ struct xlp_msi_data *md = irq_data_get_irq_handler_data(d);
+ int link, vec;
+
+ link = nlm_irq_msilink(d->irq);
+ vec = nlm_irq_msivec(d->irq);
+ xlp_msi_disable(d);
+
+ /* Ack MSI on bridge */
+ nlm_write_reg(md->lnkbase, PCIE_MSI_STATUS, 1u << vec);
+
+ /* Ack at eirr and PIC */
+ ack_c0_eirr(PIC_PCIE_LINK_MSI_IRQ(link));
+ nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link));
+}
+
+static struct irq_chip xlp_msi_chip = {
+ .name = "XLP-MSI",
+ .irq_enable = xlp_msi_enable,
+ .irq_disable = xlp_msi_disable,
+ .irq_mask_ack = xlp_msi_mask_ack,
+ .irq_unmask = xlp_msi_enable,
+};
+
+/*
+ * The MSI-X interrupt handling is different from MSI, there are 32
+ * MSI-X interrupts generated by the PIC and each of these correspond
+ * to a MSI-X vector (0-31) that can be assigned.
+ *
+ * We divide the MSI-X vectors to 8 per link and do a per-link
+ * allocation
+ *
+ * Enable and disable done using standard MSI functions.
+ */
+static void xlp_msix_mask_ack(struct irq_data *d)
+{
+ struct xlp_msi_data *md = irq_data_get_irq_handler_data(d);
+ int link, msixvec;
+
+ msixvec = nlm_irq_msixvec(d->irq);
+ link = nlm_irq_msixlink(d->irq);
+ mask_msi_irq(d);
+
+ /* Ack MSI on bridge */
+ nlm_write_reg(md->lnkbase, PCIE_MSIX_STATUS, 1u << msixvec);
+
+ /* Ack at eirr and PIC */
+ ack_c0_eirr(PIC_PCIE_MSIX_IRQ(link));
+ nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_MSIX_INDEX(msixvec));
+}
+
+static struct irq_chip xlp_msix_chip = {
+ .name = "XLP-MSIX",
+ .irq_enable = unmask_msi_irq,
+ .irq_disable = mask_msi_irq,
+ .irq_mask_ack = xlp_msix_mask_ack,
+ .irq_unmask = unmask_msi_irq,
+};
+
+void destroy_irq(unsigned int irq)
+{
+ /* nothing to do yet */
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ destroy_irq(irq);
+}
+
+/*
+ * Setup a PCIe link for MSI. By default, the links are in
+ * legacy interrupt mode. We will switch them to MSI mode
+ * at the first MSI request.
+ */
+static void xlp_config_link_msi(uint64_t lnkbase, int lirq, uint64_t msiaddr)
+{
+ u32 val;
+
+ val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
+ if ((val & 0x200) == 0) {
+ val |= 0x200; /* MSI Interrupt enable */
+ nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
+ }
+
+ val = nlm_read_reg(lnkbase, 0x1); /* CMD */
+ if ((val & 0x0400) == 0) {
+ val |= 0x0400;
+ nlm_write_reg(lnkbase, 0x1, val);
+ }
+
+ /* Update IRQ in the PCI irq reg */
+ val = nlm_read_pci_reg(lnkbase, 0xf);
+ val &= ~0x1fu;
+ val |= (1 << 8) | lirq;
+ nlm_write_pci_reg(lnkbase, 0xf, val);
+
+ /* MSI addr */
+ nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_ADDRH, msiaddr >> 32);
+ nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_ADDRL, msiaddr & 0xffffffff);
+
+ /* MSI cap for bridge */
+ val = nlm_read_reg(lnkbase, PCIE_BRIDGE_MSI_CAP);
+ if ((val & (1 << 16)) == 0) {
+ val |= 0xb << 16; /* mmc32, msi enable */
+ nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_CAP, val);
+ }
+}
+
+/*
+ * Allocate a MSI vector on a link
+ */
+static int xlp_setup_msi(uint64_t lnkbase, int node, int link,
+ struct msi_desc *desc)
+{
+ struct xlp_msi_data *md;
+ struct msi_msg msg;
+ unsigned long flags;
+ int msivec, irt, lirq, xirq, ret;
+ uint64_t msiaddr;
+
+ /* Get MSI data for the link */
+ lirq = PIC_PCIE_LINK_MSI_IRQ(link);
+ xirq = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
+ md = irq_get_handler_data(xirq);
+ msiaddr = MSI_LINK_ADDR(node, link);
+
+ spin_lock_irqsave(&md->msi_lock, flags);
+ if (md->msi_alloc_mask == 0) {
+ /* switch the link IRQ to MSI range */
+ xlp_config_link_msi(lnkbase, lirq, msiaddr);
+ irt = PIC_IRT_PCIE_LINK_INDEX(link);
+ nlm_setup_pic_irq(node, lirq, lirq, irt);
+ nlm_pic_init_irt(nlm_get_node(node)->picbase, irt, lirq,
+ node * nlm_threads_per_node(), 1 /*en */);
+ }
+
+ /* allocate a MSI vec, and tell the bridge about it */
+ msivec = fls(md->msi_alloc_mask);
+ if (msivec == XLP_MSIVEC_PER_LINK) {
+ spin_unlock_irqrestore(&md->msi_lock, flags);
+ return -ENOMEM;
+ }
+ md->msi_alloc_mask |= (1u << msivec);
+ spin_unlock_irqrestore(&md->msi_lock, flags);
+
+ msg.address_hi = msiaddr >> 32;
+ msg.address_lo = msiaddr & 0xffffffff;
+ msg.data = 0xc00 | msivec;
+
+ xirq = xirq + msivec; /* msi mapped to global irq space */
+ ret = irq_set_msi_desc(xirq, desc);
+ if (ret < 0) {
+ destroy_irq(xirq);
+ return ret;
+ }
+
+ write_msi_msg(xirq, &msg);
+ return 0;
+}
+
+/*
+ * Switch a link to MSI-X mode
+ */
+static void xlp_config_link_msix(uint64_t lnkbase, int lirq, uint64_t msixaddr)
+{
+ u32 val;
+
+ val = nlm_read_reg(lnkbase, 0x2C);
+ if ((val & 0x80000000U) == 0) {
+ val |= 0x80000000U;
+ nlm_write_reg(lnkbase, 0x2C, val);
+ }
+ val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
+ if ((val & 0x200) == 0) {
+ val |= 0x200; /* MSI Interrupt enable */
+ nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
+ }
+
+ val = nlm_read_reg(lnkbase, 0x1); /* CMD */
+ if ((val & 0x0400) == 0) {
+ val |= 0x0400;
+ nlm_write_reg(lnkbase, 0x1, val);
+ }
+
+ /* Update IRQ in the PCI irq reg */
+ val = nlm_read_pci_reg(lnkbase, 0xf);
+ val &= ~0x1fu;
+ val |= (1 << 8) | lirq;
+ nlm_write_pci_reg(lnkbase, 0xf, val);
+
+ /* MSI-X addresses */
+ nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_BASE, msixaddr >> 8);
+ nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_LIMIT,
+ (msixaddr + MSI_ADDR_SZ) >> 8);
+}
+
+/*
+ * Allocate a MSI-X vector
+ */
+static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
+ struct msi_desc *desc)
+{
+ struct xlp_msi_data *md;
+ struct msi_msg msg;
+ unsigned long flags;
+ int t, msixvec, lirq, xirq, ret;
+ uint64_t msixaddr;
+
+ /* Get MSI data for the link */
+ lirq = PIC_PCIE_MSIX_IRQ(link);
+ xirq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0));
+ md = irq_get_handler_data(xirq);
+ msixaddr = MSIX_LINK_ADDR(node, link);
+
+ spin_lock_irqsave(&md->msi_lock, flags);
+ /* switch the PCIe link to MSI-X mode at the first alloc */
+ if (md->msix_alloc_mask == 0)
+ xlp_config_link_msix(lnkbase, lirq, msixaddr);
+
+ /* allocate a MSI-X vec, and tell the bridge about it */
+ t = fls(md->msix_alloc_mask);
+ if (t == XLP_MSIXVEC_PER_LINK) {
+ spin_unlock_irqrestore(&md->msi_lock, flags);
+ return -ENOMEM;
+ }
+ md->msix_alloc_mask |= (1u << t);
+ spin_unlock_irqrestore(&md->msi_lock, flags);
+
+ xirq += t;
+ msixvec = nlm_irq_msixvec(xirq);
+ msg.address_hi = msixaddr >> 32;
+ msg.address_lo = msixaddr & 0xffffffff;
+ msg.data = 0xc00 | msixvec;
+
+ ret = irq_set_msi_desc(xirq, desc);
+ if (ret < 0) {
+ destroy_irq(xirq);
+ return ret;
+ }
+
+ write_msi_msg(xirq, &msg);
+ return 0;
+}
+
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
+ struct pci_dev *lnkdev;
+ uint64_t lnkbase;
+ int node, link, slot;
+
+ lnkdev = xlp_get_pcie_link(dev);
+ if (lnkdev == NULL) {
+ dev_err(&dev->dev, "Could not find bridge\n");
+ return 1;
+ }
+ slot = PCI_SLOT(lnkdev->devfn);
+ link = PCI_FUNC(lnkdev->devfn);
+ node = slot / 8;
+ lnkbase = nlm_get_pcie_base(node, link);
+
+ if (desc->msi_attrib.is_msix)
+ return xlp_setup_msix(lnkbase, node, link, desc);
+ else
+ return xlp_setup_msi(lnkbase, node, link, desc);
+}
+
+void __init xlp_init_node_msi_irqs(int node, int link)
+{
+ struct nlm_soc_info *nodep;
+ struct xlp_msi_data *md;
+ int irq, i, irt, msixvec;
+
+ pr_info("[%d %d] Init node PCI IRT\n", node, link);
+ nodep = nlm_get_node(node);
+
+ /* Alloc an MSI block for the link */
+ md = kzalloc(sizeof(*md), GFP_KERNEL);
+ spin_lock_init(&md->msi_lock);
+ md->msi_enabled_mask = 0;
+ md->msi_alloc_mask = 0;
+ md->msix_alloc_mask = 0;
+ md->node = nodep;
+ md->lnkbase = nlm_get_pcie_base(node, link);
+
+ /* extended space for MSI interrupts */
+ irq = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
+ for (i = irq; i < irq + XLP_MSIVEC_PER_LINK; i++) {
+ irq_set_chip_and_handler(i, &xlp_msi_chip, handle_level_irq);
+ irq_set_handler_data(i, md);
+ }
+
+ for (i = 0; i < XLP_MSIXVEC_PER_LINK; i++) {
+ /* Initialize MSI-X irts to generate one interrupt per link */
+ msixvec = link * XLP_MSIXVEC_PER_LINK + i;
+ irt = PIC_IRT_PCIE_MSIX_INDEX(msixvec);
+ nlm_pic_init_irt(nodep->picbase, irt, PIC_PCIE_MSIX_IRQ(link),
+ node * nlm_threads_per_node(), 1 /* enable */);
+
+ /* Initialize MSI-X extended irq space for the link */
+ irq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, i));
+ irq_set_chip_and_handler(irq, &xlp_msix_chip, handle_level_irq);
+ irq_set_handler_data(irq, md);
+ }
+
+}
+
+void nlm_dispatch_msi(int node, int lirq)
+{
+ struct xlp_msi_data *md;
+ int link, i, irqbase;
+ u32 status;
+
+ link = lirq - PIC_PCIE_LINK_MSI_IRQ_BASE;
+ irqbase = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
+ md = irq_get_handler_data(irqbase);
+ status = nlm_read_reg(md->lnkbase, PCIE_MSI_STATUS) &
+ md->msi_enabled_mask;
+ while (status) {
+ i = __ffs(status);
+ do_IRQ(irqbase + i);
+ status &= status - 1;
+ }
+}
+
+void nlm_dispatch_msix(int node, int lirq)
+{
+ struct xlp_msi_data *md;
+ int link, i, irqbase;
+ u32 status;
+
+ link = lirq - PIC_PCIE_MSIX_IRQ_BASE;
+ irqbase = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0));
+ md = irq_get_handler_data(irqbase);
+ status = nlm_read_reg(md->lnkbase, PCIE_MSIX_STATUS);
+
+ /* narrow it down to the MSI-x vectors for our link */
+ status = (status >> (link * XLP_MSIXVEC_PER_LINK)) &
+ ((1 << XLP_MSIXVEC_PER_LINK) - 1);
+
+ while (status) {
+ i = __ffs(status);
+ do_IRQ(irqbase + i);
+ status &= status - 1;
+ }
+}
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index 6144bb3..13eea69 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -9,7 +9,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/io.h>
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 830352e..c06205a 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -22,7 +22,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <asm/mips-boards/bonito64.h>
diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
index 16e7c25..e5738ee 100644
--- a/arch/mips/pci/ops-lantiq.c
+++ b/arch/mips/pci/ops-lantiq.c
@@ -9,7 +9,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <asm/addrspace.h>
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
index 98254af..24138bb 100644
--- a/arch/mips/pci/ops-loongson2.c
+++ b/arch/mips/pci/ops-loongson2.c
@@ -14,7 +14,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/export.h>
#include <loongson.h>
diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c
index 1cfb558..6b5821f 100644
--- a/arch/mips/pci/ops-mace.c
+++ b/arch/mips/pci/ops-mace.c
@@ -6,7 +6,6 @@
* Copyright (C) 2000, 2001 Keith M Wesolowski
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <asm/pci.h>
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 92a8543..dbbf365 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -24,7 +24,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <asm/mips-boards/msc01_pci.h>
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index 499e35c..a1a7c9f 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -1,5 +1,4 @@
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/pci.h>
#include <asm/bootinfo.h>
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
index 7c7182e..874ed6d 100644
--- a/arch/mips/pci/ops-rc32434.c
+++ b/arch/mips/pci/ops-rc32434.c
@@ -26,7 +26,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/pci.h>
#include <linux/types.h>
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 162b4cb..0f09eaf 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,7 +7,6 @@
* Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/pci.h>
diff --git a/arch/mips/pci/pci-malta.c b/arch/mips/pci/pci-malta.c
index 37134dd..f1a7389 100644
--- a/arch/mips/pci/pci-malta.c
+++ b/arch/mips/pci/pci-malta.c
@@ -241,9 +241,9 @@
return;
}
- /* Change start address to avoid conflicts with ACPI and SMB devices */
- if (controller->io_resource->start < 0x00002000UL)
- controller->io_resource->start = 0x00002000UL;
+ /* PIIX4 ACPI starts at 0x1000 */
+ if (controller->io_resource->start < 0x00001000UL)
+ controller->io_resource->start = 0x00001000UL;
iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index adeff2b..72919ae 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -436,9 +436,6 @@
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -EINVAL;
-
rpc->base = devm_ioremap_resource(dev, res);
if (IS_ERR(rpc->base))
return PTR_ERR(rpc->base);
diff --git a/arch/mips/pci/pci-xlp.c b/arch/mips/pci/pci-xlp.c
index 653d2db..7babf01 100644
--- a/arch/mips/pci/pci-xlp.c
+++ b/arch/mips/pci/pci-xlp.c
@@ -47,10 +47,11 @@
#include <asm/netlogic/interrupt.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/pcibus.h>
#include <asm/netlogic/xlp-hal/bridge.h>
@@ -66,9 +67,22 @@
u32 *cfgaddr;
where &= ~3;
- if (bus->number == 0 && PCI_SLOT(devfn) == 1 && where == 0x954)
+ if (cpu_is_xlp9xx()) {
+ /* be very careful on SoC buses */
+ if (bus->number == 0) {
+ /* Scan only existing nodes - uboot bug? */
+ if (PCI_SLOT(devfn) != 0 ||
+ !nlm_node_present(PCI_FUNC(devfn)))
+ return 0xffffffff;
+ } else if (bus->parent->number == 0) { /* SoC bus */
+ if (PCI_SLOT(devfn) == 0) /* b.0.0 hangs */
+ return 0xffffffff;
+ if (devfn == 44) /* b.5.4 hangs */
+ return 0xffffffff;
+ }
+ } else if (bus->number == 0 && PCI_SLOT(devfn) == 1 && where == 0x954) {
return 0xffffffff;
-
+ }
cfgaddr = (u32 *)(pci_config_base +
pci_cfg_addr(bus->number, devfn, where));
data = *cfgaddr;
@@ -162,27 +176,39 @@
.io_offset = 0x00000000UL,
};
-static struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev)
+struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev)
{
struct pci_bus *bus, *p;
- /* Find the bridge on bus 0 */
bus = dev->bus;
- for (p = bus->parent; p && p->number != 0; p = p->parent)
- bus = p;
- return p ? bus->self : NULL;
+ if (cpu_is_xlp9xx()) {
+ /* find bus with grand parent number == 0 */
+ for (p = bus->parent; p && p->parent && p->parent->number != 0;
+ p = p->parent)
+ bus = p;
+ return (p && p->parent) ? bus->self : NULL;
+ } else {
+ /* Find the bridge on bus 0 */
+ for (p = bus->parent; p && p->number != 0; p = p->parent)
+ bus = p;
+
+ return p ? bus->self : NULL;
+ }
}
-static inline int nlm_pci_link_to_irq(int link)
+int xlp_socdev_to_node(const struct pci_dev *lnkdev)
{
- return PIC_PCIE_LINK_0_IRQ + link;
+ if (cpu_is_xlp9xx())
+ return PCI_FUNC(lnkdev->bus->self->devfn);
+ else
+ return PCI_SLOT(lnkdev->devfn) / 8;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pci_dev *lnkdev;
- int lnkslot, lnkfunc;
+ int lnkfunc, node;
/*
* For XLP PCIe, there is an IRQ per Link, find out which
@@ -191,9 +217,11 @@
lnkdev = xlp_get_pcie_link(dev);
if (lnkdev == NULL)
return 0;
+
lnkfunc = PCI_FUNC(lnkdev->devfn);
- lnkslot = PCI_SLOT(lnkdev->devfn);
- return nlm_irq_to_xirq(lnkslot / 8, nlm_pci_link_to_irq(lnkfunc));
+ node = xlp_socdev_to_node(lnkdev);
+
+ return nlm_irq_to_xirq(node, PIC_PCIE_LINK_LEGACY_IRQ(lnkfunc));
}
/* Do platform specific device initialization at pci_enable_device() time */
@@ -220,17 +248,38 @@
* Enable byte swap in hardware. Program each link's PCIe SWAP regions
* from the link's address ranges.
*/
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_BASE0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_BASE, reg);
+ if (cpu_is_xlp9xx()) {
+ reg = nlm_read_bridge_reg(nbubase,
+ BRIDGE_9XX_PCIEMEM_BASE0 + link);
+ nlm_write_pci_reg(lnkbase, PCIE_9XX_BYTE_SWAP_MEM_BASE, reg);
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_LIMIT0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_LIM, reg | 0xfff);
+ reg = nlm_read_bridge_reg(nbubase,
+ BRIDGE_9XX_PCIEMEM_LIMIT0 + link);
+ nlm_write_pci_reg(lnkbase,
+ PCIE_9XX_BYTE_SWAP_MEM_LIM, reg | 0xfff);
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_BASE0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_BASE, reg);
+ reg = nlm_read_bridge_reg(nbubase,
+ BRIDGE_9XX_PCIEIO_BASE0 + link);
+ nlm_write_pci_reg(lnkbase, PCIE_9XX_BYTE_SWAP_IO_BASE, reg);
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_LIMIT0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
+ reg = nlm_read_bridge_reg(nbubase,
+ BRIDGE_9XX_PCIEIO_LIMIT0 + link);
+ nlm_write_pci_reg(lnkbase,
+ PCIE_9XX_BYTE_SWAP_IO_LIM, reg | 0xfff);
+ } else {
+ reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_BASE0 + link);
+ nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_BASE, reg);
+
+ reg = nlm_read_bridge_reg(nbubase,
+ BRIDGE_PCIEMEM_LIMIT0 + link);
+ nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_LIM, reg | 0xfff);
+
+ reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_BASE0 + link);
+ nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_BASE, reg);
+
+ reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_LIMIT0 + link);
+ nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
+ }
}
#else
/* Swap configuration not needed in little-endian mode */
@@ -239,7 +288,6 @@
static int __init pcibios_init(void)
{
- struct nlm_soc_info *nodep;
uint64_t pciebase;
int link, n;
u32 reg;
@@ -253,20 +301,20 @@
ioport_resource.end = ~0;
for (n = 0; n < NLM_NR_NODES; n++) {
- nodep = nlm_get_node(n);
- if (!nodep->coremask)
- continue; /* node does not exist */
+ if (!nlm_node_present(n))
+ continue;
- for (link = 0; link < 4; link++) {
+ for (link = 0; link < PCIE_NLINKS; link++) {
pciebase = nlm_get_pcie_base(n, link);
if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
continue;
xlp_config_pci_bswap(n, link);
+ xlp_init_node_msi_irqs(n, link);
/* put in intpin and irq - u-boot does not */
reg = nlm_read_pci_reg(pciebase, 0xf);
- reg &= ~0x1fu;
- reg |= (1 << 8) | nlm_pci_link_to_irq(link);
+ reg &= ~0x1ffu;
+ reg |= (1 << 8) | PIC_PCIE_LINK_LEGACY_IRQ(link);
nlm_write_pci_reg(pciebase, 0xf, reg);
pr_info("XLP PCIe: Link %d-%d initialized.\n", n, link);
}
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index 3482b8c..6073ca4 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,6 +6,7 @@
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
select HW_HAS_PCI
+ select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 424f034..1bfd1c1 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,7 @@
config SOC_RT288X
bool "RT288x"
+ select MIPS_L1_CACHE_SHIFT_4
config SOC_RT305X
bool "RT305x"
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index b952d5b..45fdfbc 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -5,7 +5,6 @@
*
* Copyright (C) 2001, 2002 Ralf Baechle
*/
-#include <linux/init.h>
#include <asm/page.h>
#include <asm/sn/addrs.h>
diff --git a/arch/mips/sgi-ip27/ip27-irq-pci.c b/arch/mips/sgi-ip27/ip27-irq-pci.c
index ec22ec5..2a1c407 100644
--- a/arch/mips/sgi-ip27/ip27-irq-pci.c
+++ b/arch/mips/sgi-ip27/ip27-irq-pci.c
@@ -8,7 +8,6 @@
#undef DEBUG
-#include <linux/init.h>
#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/signal.h>
diff --git a/arch/mips/sgi-ip27/ip27-klconfig.c b/arch/mips/sgi-ip27/ip27-klconfig.c
index 7afe146..c873d62 100644
--- a/arch/mips/sgi-ip27/ip27-klconfig.c
+++ b/arch/mips/sgi-ip27/ip27-klconfig.c
@@ -2,7 +2,6 @@
* Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index d59b820..20f582a 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -7,7 +7,6 @@
* Generic XTALK initialization code
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/smp.h>
#include <asm/sn/types.h>
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index 7c081b3..0ee48be 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -75,6 +75,7 @@
config BCMA_DRIVER_GPIO
bool "BCMA GPIO driver"
depends on BCMA && GPIOLIB
+ select IRQ_DOMAIN if BCMA_HOST_SOC
help
Driver to provide access to the GPIO pins of the bcma bus.
diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c
index 45f0996..25f9887 100644
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -9,6 +9,9 @@
*/
#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
@@ -73,19 +76,136 @@
bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
}
+#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC)
static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
- return bcma_core_irq(cc->core);
+ return irq_find_mapping(cc->irq_domain, gpio);
else
return -EINVAL;
}
+static void bcma_gpio_irq_unmask(struct irq_data *d)
+{
+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
+ u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
+
+ bcma_chipco_gpio_polarity(cc, BIT(gpio), val);
+ bcma_chipco_gpio_intmask(cc, BIT(gpio), BIT(gpio));
+}
+
+static void bcma_gpio_irq_mask(struct irq_data *d)
+{
+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
+
+ bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
+}
+
+static struct irq_chip bcma_gpio_irq_chip = {
+ .name = "BCMA-GPIO",
+ .irq_mask = bcma_gpio_irq_mask,
+ .irq_unmask = bcma_gpio_irq_unmask,
+};
+
+static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
+{
+ struct bcma_drv_cc *cc = dev_id;
+ u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
+ u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
+ u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
+ unsigned long irqs = (val ^ pol) & mask;
+ int gpio;
+
+ if (!irqs)
+ return IRQ_NONE;
+
+ for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
+ generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
+ bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
+
+ return IRQ_HANDLED;
+}
+
+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ int gpio, hwirq, err;
+
+ if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
+ return 0;
+
+ cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
+ &irq_domain_simple_ops, cc);
+ if (!cc->irq_domain) {
+ err = -ENODEV;
+ goto err_irq_domain;
+ }
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_create_mapping(cc->irq_domain, gpio);
+
+ irq_set_chip_data(irq, cc);
+ irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
+ handle_simple_irq);
+ }
+
+ hwirq = bcma_core_irq(cc->core);
+ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ cc);
+ if (err)
+ goto err_req_irq;
+
+ bcma_chipco_gpio_intmask(cc, ~0, 0);
+ bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
+
+ return 0;
+
+err_req_irq:
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(cc->irq_domain);
+err_irq_domain:
+ return err;
+}
+
+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ int gpio;
+
+ if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
+ return;
+
+ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+ free_irq(bcma_core_irq(cc->core), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(cc->irq_domain);
+}
+#else
+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
+{
+ return 0;
+}
+
+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
+{
+}
+#endif
+
int bcma_gpio_init(struct bcma_drv_cc *cc)
{
struct gpio_chip *chip = &cc->gpio;
+ int err;
chip->label = "bcma_gpio";
chip->owner = THIS_MODULE;
@@ -95,7 +215,9 @@
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
chip->direction_output = bcma_gpio_direction_output;
+#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC)
chip->to_irq = bcma_gpio_to_irq;
+#endif
chip->ngpio = 16;
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
@@ -105,10 +227,21 @@
else
chip->base = -1;
- return gpiochip_add(chip);
+ err = bcma_gpio_irq_domain_init(cc);
+ if (err)
+ return err;
+
+ err = gpiochip_add(chip);
+ if (err) {
+ bcma_gpio_irq_domain_exit(cc);
+ return err;
+ }
+
+ return 0;
}
int bcma_gpio_unregister(struct bcma_drv_cc *cc)
{
+ bcma_gpio_irq_domain_exit(cc);
return gpiochip_remove(&cc->gpio);
}
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 2cd9b0e..75b3603 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -168,6 +168,7 @@
config SSB_DRIVER_GPIO
bool "SSB GPIO driver"
depends on SSB && GPIOLIB
+ select IRQ_DOMAIN if SSB_EMBEDDED
help
Driver to provide access to the GPIO pins on the bus.
diff --git a/drivers/ssb/driver_gpio.c b/drivers/ssb/driver_gpio.c
index dc109de..ba350d2 100644
--- a/drivers/ssb/driver_gpio.c
+++ b/drivers/ssb/driver_gpio.c
@@ -9,16 +9,40 @@
*/
#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/ssb/ssb.h>
#include "ssb_private.h"
+
+/**************************************************
+ * Shared
+ **************************************************/
+
static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip)
{
return container_of(chip, struct ssb_bus, gpio);
}
+#if IS_ENABLED(CONFIG_SSB_EMBEDDED)
+static int ssb_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ return irq_find_mapping(bus->irq_domain, gpio);
+ else
+ return -EINVAL;
+}
+#endif
+
+/**************************************************
+ * ChipCommon
+ **************************************************/
+
static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
{
struct ssb_bus *bus = ssb_gpio_get_bus(chip);
@@ -74,19 +98,129 @@
ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
}
-static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
+#if IS_ENABLED(CONFIG_SSB_EMBEDDED)
+static void ssb_gpio_irq_chipco_mask(struct irq_data *d)
{
- struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+ struct ssb_bus *bus = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
- if (bus->bustype == SSB_BUSTYPE_SSB)
- return ssb_mips_irq(bus->chipco.dev) + 2;
- else
- return -EINVAL;
+ ssb_chipco_gpio_intmask(&bus->chipco, BIT(gpio), 0);
}
+static void ssb_gpio_irq_chipco_unmask(struct irq_data *d)
+{
+ struct ssb_bus *bus = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
+ u32 val = ssb_chipco_gpio_in(&bus->chipco, BIT(gpio));
+
+ ssb_chipco_gpio_polarity(&bus->chipco, BIT(gpio), val);
+ ssb_chipco_gpio_intmask(&bus->chipco, BIT(gpio), BIT(gpio));
+}
+
+static struct irq_chip ssb_gpio_irq_chipco_chip = {
+ .name = "SSB-GPIO-CC",
+ .irq_mask = ssb_gpio_irq_chipco_mask,
+ .irq_unmask = ssb_gpio_irq_chipco_unmask,
+};
+
+static irqreturn_t ssb_gpio_irq_chipco_handler(int irq, void *dev_id)
+{
+ struct ssb_bus *bus = dev_id;
+ struct ssb_chipcommon *chipco = &bus->chipco;
+ u32 val = chipco_read32(chipco, SSB_CHIPCO_GPIOIN);
+ u32 mask = chipco_read32(chipco, SSB_CHIPCO_GPIOIRQ);
+ u32 pol = chipco_read32(chipco, SSB_CHIPCO_GPIOPOL);
+ unsigned long irqs = (val ^ pol) & mask;
+ int gpio;
+
+ if (!irqs)
+ return IRQ_NONE;
+
+ for_each_set_bit(gpio, &irqs, bus->gpio.ngpio)
+ generic_handle_irq(ssb_gpio_to_irq(&bus->gpio, gpio));
+ ssb_chipco_gpio_polarity(chipco, irqs, val & irqs);
+
+ return IRQ_HANDLED;
+}
+
+static int ssb_gpio_irq_chipco_domain_init(struct ssb_bus *bus)
+{
+ struct ssb_chipcommon *chipco = &bus->chipco;
+ struct gpio_chip *chip = &bus->gpio;
+ int gpio, hwirq, err;
+
+ if (bus->bustype != SSB_BUSTYPE_SSB)
+ return 0;
+
+ bus->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
+ &irq_domain_simple_ops, chipco);
+ if (!bus->irq_domain) {
+ err = -ENODEV;
+ goto err_irq_domain;
+ }
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_create_mapping(bus->irq_domain, gpio);
+
+ irq_set_chip_data(irq, bus);
+ irq_set_chip_and_handler(irq, &ssb_gpio_irq_chipco_chip,
+ handle_simple_irq);
+ }
+
+ hwirq = ssb_mips_irq(bus->chipco.dev) + 2;
+ err = request_irq(hwirq, ssb_gpio_irq_chipco_handler, IRQF_SHARED,
+ "gpio", bus);
+ if (err)
+ goto err_req_irq;
+
+ ssb_chipco_gpio_intmask(&bus->chipco, ~0, 0);
+ chipco_set32(chipco, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO);
+
+ return 0;
+
+err_req_irq:
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(bus->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(bus->irq_domain);
+err_irq_domain:
+ return err;
+}
+
+static void ssb_gpio_irq_chipco_domain_exit(struct ssb_bus *bus)
+{
+ struct ssb_chipcommon *chipco = &bus->chipco;
+ struct gpio_chip *chip = &bus->gpio;
+ int gpio;
+
+ if (bus->bustype != SSB_BUSTYPE_SSB)
+ return;
+
+ chipco_mask32(chipco, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO);
+ free_irq(ssb_mips_irq(bus->chipco.dev) + 2, chipco);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(bus->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(bus->irq_domain);
+}
+#else
+static int ssb_gpio_irq_chipco_domain_init(struct ssb_bus *bus)
+{
+ return 0;
+}
+
+static void ssb_gpio_irq_chipco_domain_exit(struct ssb_bus *bus)
+{
+}
+#endif
+
static int ssb_gpio_chipco_init(struct ssb_bus *bus)
{
struct gpio_chip *chip = &bus->gpio;
+ int err;
chip->label = "ssb_chipco_gpio";
chip->owner = THIS_MODULE;
@@ -96,7 +230,9 @@
chip->set = ssb_gpio_chipco_set_value;
chip->direction_input = ssb_gpio_chipco_direction_input;
chip->direction_output = ssb_gpio_chipco_direction_output;
- chip->to_irq = ssb_gpio_chipco_to_irq;
+#if IS_ENABLED(CONFIG_SSB_EMBEDDED)
+ chip->to_irq = ssb_gpio_to_irq;
+#endif
chip->ngpio = 16;
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
@@ -106,9 +242,23 @@
else
chip->base = -1;
- return gpiochip_add(chip);
+ err = ssb_gpio_irq_chipco_domain_init(bus);
+ if (err)
+ return err;
+
+ err = gpiochip_add(chip);
+ if (err) {
+ ssb_gpio_irq_chipco_domain_exit(bus);
+ return err;
+ }
+
+ return 0;
}
+/**************************************************
+ * EXTIF
+ **************************************************/
+
#ifdef CONFIG_SSB_DRIVER_EXTIF
static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio)
@@ -145,19 +295,127 @@
return 0;
}
-static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
+#if IS_ENABLED(CONFIG_SSB_EMBEDDED)
+static void ssb_gpio_irq_extif_mask(struct irq_data *d)
{
- struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+ struct ssb_bus *bus = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
- if (bus->bustype == SSB_BUSTYPE_SSB)
- return ssb_mips_irq(bus->extif.dev) + 2;
- else
- return -EINVAL;
+ ssb_extif_gpio_intmask(&bus->extif, BIT(gpio), 0);
}
+static void ssb_gpio_irq_extif_unmask(struct irq_data *d)
+{
+ struct ssb_bus *bus = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
+ u32 val = ssb_extif_gpio_in(&bus->extif, BIT(gpio));
+
+ ssb_extif_gpio_polarity(&bus->extif, BIT(gpio), val);
+ ssb_extif_gpio_intmask(&bus->extif, BIT(gpio), BIT(gpio));
+}
+
+static struct irq_chip ssb_gpio_irq_extif_chip = {
+ .name = "SSB-GPIO-EXTIF",
+ .irq_mask = ssb_gpio_irq_extif_mask,
+ .irq_unmask = ssb_gpio_irq_extif_unmask,
+};
+
+static irqreturn_t ssb_gpio_irq_extif_handler(int irq, void *dev_id)
+{
+ struct ssb_bus *bus = dev_id;
+ struct ssb_extif *extif = &bus->extif;
+ u32 val = ssb_read32(extif->dev, SSB_EXTIF_GPIO_IN);
+ u32 mask = ssb_read32(extif->dev, SSB_EXTIF_GPIO_INTMASK);
+ u32 pol = ssb_read32(extif->dev, SSB_EXTIF_GPIO_INTPOL);
+ unsigned long irqs = (val ^ pol) & mask;
+ int gpio;
+
+ if (!irqs)
+ return IRQ_NONE;
+
+ for_each_set_bit(gpio, &irqs, bus->gpio.ngpio)
+ generic_handle_irq(ssb_gpio_to_irq(&bus->gpio, gpio));
+ ssb_extif_gpio_polarity(extif, irqs, val & irqs);
+
+ return IRQ_HANDLED;
+}
+
+static int ssb_gpio_irq_extif_domain_init(struct ssb_bus *bus)
+{
+ struct ssb_extif *extif = &bus->extif;
+ struct gpio_chip *chip = &bus->gpio;
+ int gpio, hwirq, err;
+
+ if (bus->bustype != SSB_BUSTYPE_SSB)
+ return 0;
+
+ bus->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
+ &irq_domain_simple_ops, extif);
+ if (!bus->irq_domain) {
+ err = -ENODEV;
+ goto err_irq_domain;
+ }
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_create_mapping(bus->irq_domain, gpio);
+
+ irq_set_chip_data(irq, bus);
+ irq_set_chip_and_handler(irq, &ssb_gpio_irq_extif_chip,
+ handle_simple_irq);
+ }
+
+ hwirq = ssb_mips_irq(bus->extif.dev) + 2;
+ err = request_irq(hwirq, ssb_gpio_irq_extif_handler, IRQF_SHARED,
+ "gpio", bus);
+ if (err)
+ goto err_req_irq;
+
+ ssb_extif_gpio_intmask(&bus->extif, ~0, 0);
+
+ return 0;
+
+err_req_irq:
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(bus->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(bus->irq_domain);
+err_irq_domain:
+ return err;
+}
+
+static void ssb_gpio_irq_extif_domain_exit(struct ssb_bus *bus)
+{
+ struct ssb_extif *extif = &bus->extif;
+ struct gpio_chip *chip = &bus->gpio;
+ int gpio;
+
+ if (bus->bustype != SSB_BUSTYPE_SSB)
+ return;
+
+ free_irq(ssb_mips_irq(bus->extif.dev) + 2, extif);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(bus->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(bus->irq_domain);
+}
+#else
+static int ssb_gpio_irq_extif_domain_init(struct ssb_bus *bus)
+{
+ return 0;
+}
+
+static void ssb_gpio_irq_extif_domain_exit(struct ssb_bus *bus)
+{
+}
+#endif
+
static int ssb_gpio_extif_init(struct ssb_bus *bus)
{
struct gpio_chip *chip = &bus->gpio;
+ int err;
chip->label = "ssb_extif_gpio";
chip->owner = THIS_MODULE;
@@ -165,7 +423,9 @@
chip->set = ssb_gpio_extif_set_value;
chip->direction_input = ssb_gpio_extif_direction_input;
chip->direction_output = ssb_gpio_extif_direction_output;
- chip->to_irq = ssb_gpio_extif_to_irq;
+#if IS_ENABLED(CONFIG_SSB_EMBEDDED)
+ chip->to_irq = ssb_gpio_to_irq;
+#endif
chip->ngpio = 5;
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
@@ -175,7 +435,17 @@
else
chip->base = -1;
- return gpiochip_add(chip);
+ err = ssb_gpio_irq_extif_domain_init(bus);
+ if (err)
+ return err;
+
+ err = gpiochip_add(chip);
+ if (err) {
+ ssb_gpio_irq_extif_domain_exit(bus);
+ return err;
+ }
+
+ return 0;
}
#else
@@ -185,6 +455,10 @@
}
#endif
+/**************************************************
+ * Init
+ **************************************************/
+
int ssb_gpio_init(struct ssb_bus *bus)
{
if (ssb_chipco_available(&bus->chipco))
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 32a811d..2fead38 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -593,6 +593,13 @@
ssb_pcicore_init(&bus->pcicore);
if (bus->bustype == SSB_BUSTYPE_SSB)
ssb_watchdog_register(bus);
+
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
+ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
+ ssb_dbg("Error registering GPIO driver: %i\n", err);
+
ssb_bus_may_powerdown(bus);
err = ssb_devices_register(bus);
@@ -830,11 +837,6 @@
ssb_chipcommon_init(&bus->chipco);
ssb_extif_init(&bus->extif);
ssb_mipscore_init(&bus->mipscore);
- err = ssb_gpio_init(bus);
- if (err == -ENOTSUPP)
- ssb_dbg("GPIO driver not activated\n");
- else if (err)
- ssb_dbg("Error registering GPIO driver: %i\n", err);
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 649d512..78e82b0 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -29,10 +29,7 @@
#include <linux/sysrq.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
-
-#include <bcm63xx_irq.h>
-#include <bcm63xx_regs.h>
-#include <bcm63xx_io.h>
+#include <linux/serial_bcm63xx.h>
#define BCM63XX_NR_UARTS 2
@@ -81,13 +78,13 @@
static inline unsigned int bcm_uart_readl(struct uart_port *port,
unsigned int offset)
{
- return bcm_readl(port->membase + offset);
+ return __raw_readl(port->membase + offset);
}
static inline void bcm_uart_writel(struct uart_port *port,
unsigned int value, unsigned int offset)
{
- bcm_writel(value, port->membase + offset);
+ __raw_writel(value, port->membase + offset);
}
/*
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index c49e1a1..63d105c 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -640,6 +640,7 @@
spinlock_t gpio_lock;
#ifdef CONFIG_BCMA_DRIVER_GPIO
struct gpio_chip gpio;
+ struct irq_domain *irq_domain;
#endif
};
diff --git a/include/linux/serial_bcm63xx.h b/include/linux/serial_bcm63xx.h
new file mode 100644
index 0000000..570e964
--- /dev/null
+++ b/include/linux/serial_bcm63xx.h
@@ -0,0 +1,119 @@
+#ifndef _LINUX_SERIAL_BCM63XX_H
+#define _LINUX_SERIAL_BCM63XX_H
+
+/* UART Control Register */
+#define UART_CTL_REG 0x0
+#define UART_CTL_RXTMOUTCNT_SHIFT 0
+#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
+#define UART_CTL_RSTTXDN_SHIFT 5
+#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT)
+#define UART_CTL_RSTRXFIFO_SHIFT 6
+#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT)
+#define UART_CTL_RSTTXFIFO_SHIFT 7
+#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT)
+#define UART_CTL_STOPBITS_SHIFT 8
+#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_BITSPERSYM_SHIFT 12
+#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT)
+#define UART_CTL_XMITBRK_SHIFT 14
+#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT)
+#define UART_CTL_RSVD_SHIFT 15
+#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT)
+#define UART_CTL_RXPAREVEN_SHIFT 16
+#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT)
+#define UART_CTL_RXPAREN_SHIFT 17
+#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT)
+#define UART_CTL_TXPAREVEN_SHIFT 18
+#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT)
+#define UART_CTL_TXPAREN_SHIFT 18
+#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT)
+#define UART_CTL_LOOPBACK_SHIFT 20
+#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT)
+#define UART_CTL_RXEN_SHIFT 21
+#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT)
+#define UART_CTL_TXEN_SHIFT 22
+#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT)
+#define UART_CTL_BRGEN_SHIFT 23
+#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT)
+
+/* UART Baudword register */
+#define UART_BAUD_REG 0x4
+
+/* UART Misc Control register */
+#define UART_MCTL_REG 0x8
+#define UART_MCTL_DTR_SHIFT 0
+#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT)
+#define UART_MCTL_RTS_SHIFT 1
+#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT)
+#define UART_MCTL_RXFIFOTHRESH_SHIFT 8
+#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
+#define UART_MCTL_TXFIFOTHRESH_SHIFT 12
+#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
+#define UART_MCTL_RXFIFOFILL_SHIFT 16
+#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
+#define UART_MCTL_TXFIFOFILL_SHIFT 24
+#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
+
+/* UART External Input Configuration register */
+#define UART_EXTINP_REG 0xc
+#define UART_EXTINP_RI_SHIFT 0
+#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT)
+#define UART_EXTINP_CTS_SHIFT 1
+#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT)
+#define UART_EXTINP_DCD_SHIFT 2
+#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT)
+#define UART_EXTINP_DSR_SHIFT 3
+#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT)
+#define UART_EXTINP_IRSTAT(x) (1 << (x + 4))
+#define UART_EXTINP_IRMASK(x) (1 << (x + 8))
+#define UART_EXTINP_IR_RI 0
+#define UART_EXTINP_IR_CTS 1
+#define UART_EXTINP_IR_DCD 2
+#define UART_EXTINP_IR_DSR 3
+#define UART_EXTINP_RI_NOSENSE_SHIFT 16
+#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT)
+#define UART_EXTINP_CTS_NOSENSE_SHIFT 17
+#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
+#define UART_EXTINP_DCD_NOSENSE_SHIFT 18
+#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
+#define UART_EXTINP_DSR_NOSENSE_SHIFT 19
+#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
+
+/* UART Interrupt register */
+#define UART_IR_REG 0x10
+#define UART_IR_MASK(x) (1 << (x + 16))
+#define UART_IR_STAT(x) (1 << (x))
+#define UART_IR_EXTIP 0
+#define UART_IR_TXUNDER 1
+#define UART_IR_TXOVER 2
+#define UART_IR_TXTRESH 3
+#define UART_IR_TXRDLATCH 4
+#define UART_IR_TXEMPTY 5
+#define UART_IR_RXUNDER 6
+#define UART_IR_RXOVER 7
+#define UART_IR_RXTIMEOUT 8
+#define UART_IR_RXFULL 9
+#define UART_IR_RXTHRESH 10
+#define UART_IR_RXNOTEMPTY 11
+#define UART_IR_RXFRAMEERR 12
+#define UART_IR_RXPARERR 13
+#define UART_IR_RXBRK 14
+#define UART_IR_TXDONE 15
+
+/* UART Fifo register */
+#define UART_FIFO_REG 0x14
+#define UART_FIFO_VALID_SHIFT 0
+#define UART_FIFO_VALID_MASK 0xff
+#define UART_FIFO_FRAMEERR_SHIFT 8
+#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT)
+#define UART_FIFO_PARERR_SHIFT 9
+#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT)
+#define UART_FIFO_BRKDET_SHIFT 10
+#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT)
+#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \
+ UART_FIFO_PARERR_MASK | \
+ UART_FIFO_BRKDET_MASK)
+
+#endif /* _LINUX_SERIAL_BCM63XX_H */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index c64999f..07ef9b8 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -486,6 +486,7 @@
#endif /* EMBEDDED */
#ifdef CONFIG_SSB_DRIVER_GPIO
struct gpio_chip gpio;
+ struct irq_domain *irq_domain;
#endif /* DRIVER_GPIO */
/* Internal-only stuff follows. Do not touch. */
