/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called COPYING.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/
#include <net/mac80211.h>

#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-fw.h"
#include "iwl-debug.h"
#include "iwl-csr.h" /* for iwl_mvm_rx_card_state_notif */
#include "iwl-io.h" /* for iwl_mvm_rx_card_state_notif */
#include "iwl-eeprom-parse.h"

#include "mvm.h"
#include "iwl-phy-db.h"

#define MVM_UCODE_ALIVE_TIMEOUT	HZ
#define MVM_UCODE_CALIB_TIMEOUT	(2*HZ)

#define UCODE_VALID_OK	cpu_to_le32(0x1)

struct iwl_mvm_alive_data {
	bool valid;
	u32 scd_base_addr;
};

static inline const struct fw_img *
iwl_get_ucode_image(struct iwl_mvm *mvm, enum iwl_ucode_type ucode_type)
{
	if (ucode_type >= IWL_UCODE_TYPE_MAX)
		return NULL;

	return &mvm->fw->img[ucode_type];
}

static int iwl_send_tx_ant_cfg(struct iwl_mvm *mvm, u8 valid_tx_ant)
{
	struct iwl_tx_ant_cfg_cmd tx_ant_cmd = {
		.valid = cpu_to_le32(valid_tx_ant),
	};

	IWL_DEBUG_FW(mvm, "select valid tx ant: %u\n", valid_tx_ant);
	return iwl_mvm_send_cmd_pdu(mvm, TX_ANT_CONFIGURATION_CMD, CMD_SYNC,
				    sizeof(tx_ant_cmd), &tx_ant_cmd);
}

static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
			 struct iwl_rx_packet *pkt, void *data)
{
	struct iwl_mvm *mvm =
		container_of(notif_wait, struct iwl_mvm, notif_wait);
	struct iwl_mvm_alive_data *alive_data = data;
	struct mvm_alive_resp *palive;
	struct mvm_alive_resp_ver2 *palive2;

	if (iwl_rx_packet_payload_len(pkt) == sizeof(*palive)) {
		palive = (void *)pkt->data;

		mvm->support_umac_log = false;
		mvm->error_event_table =
			le32_to_cpu(palive->error_event_table_ptr);
		mvm->log_event_table = le32_to_cpu(palive->log_event_table_ptr);
		alive_data->scd_base_addr = le32_to_cpu(palive->scd_base_ptr);

		alive_data->valid = le16_to_cpu(palive->status) ==
				    IWL_ALIVE_STATUS_OK;
		IWL_DEBUG_FW(mvm,
			     "Alive VER1 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n",
			     le16_to_cpu(palive->status), palive->ver_type,
			     palive->ver_subtype, palive->flags);
	} else {
		palive2 = (void *)pkt->data;

		mvm->error_event_table =
			le32_to_cpu(palive2->error_event_table_ptr);
		mvm->log_event_table =
			le32_to_cpu(palive2->log_event_table_ptr);
		alive_data->scd_base_addr = le32_to_cpu(palive2->scd_base_ptr);
		mvm->umac_error_event_table =
			le32_to_cpu(palive2->error_info_addr);

		alive_data->valid = le16_to_cpu(palive2->status) ==
				    IWL_ALIVE_STATUS_OK;
		if (mvm->umac_error_event_table)
			mvm->support_umac_log = true;

		IWL_DEBUG_FW(mvm,
			     "Alive VER2 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n",
			     le16_to_cpu(palive2->status), palive2->ver_type,
			     palive2->ver_subtype, palive2->flags);

		IWL_DEBUG_FW(mvm,
			     "UMAC version: Major - 0x%x, Minor - 0x%x\n",
			     palive2->umac_major, palive2->umac_minor);
	}

	return true;
}

static bool iwl_wait_phy_db_entry(struct iwl_notif_wait_data *notif_wait,
				  struct iwl_rx_packet *pkt, void *data)
{
	struct iwl_phy_db *phy_db = data;

	if (pkt->hdr.cmd != CALIB_RES_NOTIF_PHY_DB) {
		WARN_ON(pkt->hdr.cmd != INIT_COMPLETE_NOTIF);
		return true;
	}

	WARN_ON(iwl_phy_db_set_section(phy_db, pkt, GFP_ATOMIC));

	return false;
}

static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
					 enum iwl_ucode_type ucode_type)
{
	struct iwl_notification_wait alive_wait;
	struct iwl_mvm_alive_data alive_data;
	const struct fw_img *fw;
	int ret, i;
	enum iwl_ucode_type old_type = mvm->cur_ucode;
	static const u8 alive_cmd[] = { MVM_ALIVE };

	fw = iwl_get_ucode_image(mvm, ucode_type);
	if (WARN_ON(!fw))
		return -EINVAL;
	mvm->cur_ucode = ucode_type;
	mvm->ucode_loaded = false;

	iwl_init_notification_wait(&mvm->notif_wait, &alive_wait,
				   alive_cmd, ARRAY_SIZE(alive_cmd),
				   iwl_alive_fn, &alive_data);

	ret = iwl_trans_start_fw(mvm->trans, fw, ucode_type == IWL_UCODE_INIT);
	if (ret) {
		mvm->cur_ucode = old_type;
		iwl_remove_notification(&mvm->notif_wait, &alive_wait);
		return ret;
	}

	/*
	 * Some things may run in the background now, but we
	 * just wait for the ALIVE notification here.
	 */
	ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait,
				    MVM_UCODE_ALIVE_TIMEOUT);
	if (ret) {
		mvm->cur_ucode = old_type;
		return ret;
	}

	if (!alive_data.valid) {
		IWL_ERR(mvm, "Loaded ucode is not valid!\n");
		mvm->cur_ucode = old_type;
		return -EIO;
	}

	iwl_trans_fw_alive(mvm->trans, alive_data.scd_base_addr);

	/*
	 * Note: all the queues are enabled as part of the interface
	 * initialization, but in firmware restart scenarios they
	 * could be stopped, so wake them up. In firmware restart,
	 * mac80211 will have the queues stopped as well until the
	 * reconfiguration completes. During normal startup, they
	 * will be empty.
	 */

	for (i = 0; i < IWL_MAX_HW_QUEUES; i++) {
		if (i < mvm->first_agg_queue && i != IWL_MVM_CMD_QUEUE)
			mvm->queue_to_mac80211[i] = i;
		else
			mvm->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
		atomic_set(&mvm->queue_stop_count[i], 0);
	}

	mvm->transport_queue_stop = 0;

	mvm->ucode_loaded = true;

	return 0;
}

static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
{
	struct iwl_phy_cfg_cmd phy_cfg_cmd;
	enum iwl_ucode_type ucode_type = mvm->cur_ucode;

	/* Set parameters */
	phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config);
	phy_cfg_cmd.calib_control.event_trigger =
		mvm->fw->default_calib[ucode_type].event_trigger;
	phy_cfg_cmd.calib_control.flow_trigger =
		mvm->fw->default_calib[ucode_type].flow_trigger;

	IWL_DEBUG_INFO(mvm, "Sending Phy CFG command: 0x%x\n",
		       phy_cfg_cmd.phy_cfg);

	return iwl_mvm_send_cmd_pdu(mvm, PHY_CONFIGURATION_CMD, CMD_SYNC,
				    sizeof(phy_cfg_cmd), &phy_cfg_cmd);
}

int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
{
	struct iwl_notification_wait calib_wait;
	static const u8 init_complete[] = {
		INIT_COMPLETE_NOTIF,
		CALIB_RES_NOTIF_PHY_DB
	};
	int ret;

	lockdep_assert_held(&mvm->mutex);

	if (WARN_ON_ONCE(mvm->init_ucode_complete))
		return 0;

	iwl_init_notification_wait(&mvm->notif_wait,
				   &calib_wait,
				   init_complete,
				   ARRAY_SIZE(init_complete),
				   iwl_wait_phy_db_entry,
				   mvm->phy_db);

	/* Will also start the device */
	ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_INIT);
	if (ret) {
		IWL_ERR(mvm, "Failed to start INIT ucode: %d\n", ret);
		goto error;
	}

	ret = iwl_send_bt_prio_tbl(mvm);
	if (ret)
		goto error;

	/* Read the NVM only at driver load time, no need to do this twice */
	if (read_nvm) {
		/* Read nvm */
		ret = iwl_nvm_init(mvm);
		if (ret) {
			IWL_ERR(mvm, "Failed to read NVM: %d\n", ret);
			goto error;
		}
	}

	/* In case we read the NVM from external file, load it to the NIC */
	if (iwlwifi_mod_params.nvm_file)
		iwl_mvm_load_nvm_to_nic(mvm);

	ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans);
	WARN_ON(ret);

	/*
	 * abort after reading the nvm in case RF Kill is on, we will complete
	 * the init seq later when RF kill will switch to off
	 */
	if (iwl_mvm_is_radio_killed(mvm)) {
		IWL_DEBUG_RF_KILL(mvm,
				  "jump over all phy activities due to RF kill\n");
		iwl_remove_notification(&mvm->notif_wait, &calib_wait);
		ret = 1;
		goto out;
	}

	/* Send TX valid antennas before triggering calibrations */
	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
	if (ret)
		goto error;

	/*
	 * Send phy configurations command to init uCode
	 * to start the 16.0 uCode init image internal calibrations.
	 */
	ret = iwl_send_phy_cfg_cmd(mvm);
	if (ret) {
		IWL_ERR(mvm, "Failed to run INIT calibrations: %d\n",
			ret);
		goto error;
	}

	/*
	 * Some things may run in the background now, but we
	 * just wait for the calibration complete notification.
	 */
	ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait,
			MVM_UCODE_CALIB_TIMEOUT);
	if (!ret)
		mvm->init_ucode_complete = true;
	goto out;

error:
	iwl_remove_notification(&mvm->notif_wait, &calib_wait);
out:
	if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
		/* we want to debug INIT and we have no NVM - fake */
		mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +
					sizeof(struct ieee80211_channel) +
					sizeof(struct ieee80211_rate),
					GFP_KERNEL);
		if (!mvm->nvm_data)
			return -ENOMEM;
		mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
		mvm->nvm_data->bands[0].n_channels = 1;
		mvm->nvm_data->bands[0].n_bitrates = 1;
		mvm->nvm_data->bands[0].bitrates =
			(void *)mvm->nvm_data->channels + 1;
		mvm->nvm_data->bands[0].bitrates->hw_value = 10;
	}

	return ret;
}

int iwl_mvm_up(struct iwl_mvm *mvm)
{
	int ret, i;
	struct ieee80211_channel *chan;
	struct cfg80211_chan_def chandef;

	lockdep_assert_held(&mvm->mutex);

	ret = iwl_trans_start_hw(mvm->trans);
	if (ret)
		return ret;

	/*
	 * If we haven't completed the run of the init ucode during
	 * module loading, load init ucode now
	 * (for example, if we were in RFKILL)
	 */
	if (!mvm->init_ucode_complete) {
		ret = iwl_run_init_mvm_ucode(mvm, false);
		if (ret && !iwlmvm_mod_params.init_dbg) {
			IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret);
			/* this can't happen */
			if (WARN_ON(ret > 0))
				ret = -ERFKILL;
			goto error;
		}
		if (!iwlmvm_mod_params.init_dbg) {
			/*
			 * should stop and start HW since that INIT
			 * image just loaded
			 */
			iwl_trans_stop_device(mvm->trans);
			ret = iwl_trans_start_hw(mvm->trans);
			if (ret)
				return ret;
		}
	}

	if (iwlmvm_mod_params.init_dbg)
		return 0;

	ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_REGULAR);
	if (ret) {
		IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret);
		goto error;
	}

	ret = iwl_mvm_sf_update(mvm, NULL, false);
	if (ret)
		IWL_ERR(mvm, "Failed to initialize Smart Fifo\n");

	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
	if (ret)
		goto error;

	ret = iwl_send_bt_prio_tbl(mvm);
	if (ret)
		goto error;

	ret = iwl_send_bt_init_conf(mvm);
	if (ret)
		goto error;

	/* Send phy db control command and then phy db calibration*/
	ret = iwl_send_phy_db_data(mvm->phy_db);
	if (ret)
		goto error;

	ret = iwl_send_phy_cfg_cmd(mvm);
	if (ret)
		goto error;

	/* init the fw <-> mac80211 STA mapping */
	for (i = 0; i < IWL_MVM_STATION_COUNT; i++)
		RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL);

	/* Add auxiliary station for scanning */
	ret = iwl_mvm_add_aux_sta(mvm);
	if (ret)
		goto error;

	/* Add all the PHY contexts */
	chan = &mvm->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels[0];
	cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT);
	for (i = 0; i < NUM_PHY_CTX; i++) {
		/*
		 * The channel used here isn't relevant as it's
		 * going to be overwritten in the other flows.
		 * For now use the first channel we have.
		 */
		ret = iwl_mvm_phy_ctxt_add(mvm, &mvm->phy_ctxts[i],
					   &chandef, 1, 1);
		if (ret)
			goto error;
	}

	/* Initialize tx backoffs to the minimal possible */
	iwl_mvm_tt_tx_backoff(mvm, 0);

	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT)) {
		ret = iwl_power_legacy_set_cam_mode(mvm);
		if (ret)
			goto error;
	}

	ret = iwl_mvm_power_update_device(mvm);
	if (ret)
		goto error;

	/* allow FW/transport low power modes if not during restart */
	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
		iwl_mvm_unref(mvm, IWL_MVM_REF_UCODE_DOWN);

	IWL_DEBUG_INFO(mvm, "RT uCode started.\n");
	return 0;
 error:
	iwl_trans_stop_device(mvm->trans);
	return ret;
}

int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm)
{
	int ret, i;

	lockdep_assert_held(&mvm->mutex);

	ret = iwl_trans_start_hw(mvm->trans);
	if (ret)
		return ret;

	ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_WOWLAN);
	if (ret) {
		IWL_ERR(mvm, "Failed to start WoWLAN firmware: %d\n", ret);
		goto error;
	}

	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
	if (ret)
		goto error;

	/* Send phy db control command and then phy db calibration*/
	ret = iwl_send_phy_db_data(mvm->phy_db);
	if (ret)
		goto error;

	ret = iwl_send_phy_cfg_cmd(mvm);
	if (ret)
		goto error;

	/* init the fw <-> mac80211 STA mapping */
	for (i = 0; i < IWL_MVM_STATION_COUNT; i++)
		RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL);

	/* Add auxiliary station for scanning */
	ret = iwl_mvm_add_aux_sta(mvm);
	if (ret)
		goto error;

	return 0;
 error:
	iwl_trans_stop_device(mvm->trans);
	return ret;
}

int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm,
				    struct iwl_rx_cmd_buffer *rxb,
				    struct iwl_device_cmd *cmd)
{
	struct iwl_rx_packet *pkt = rxb_addr(rxb);
	struct iwl_card_state_notif *card_state_notif = (void *)pkt->data;
	u32 flags = le32_to_cpu(card_state_notif->flags);

	IWL_DEBUG_RF_KILL(mvm, "Card state received: HW:%s SW:%s CT:%s\n",
			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
			  (flags & SW_CARD_DISABLED) ? "Kill" : "On",
			  (flags & CT_KILL_CARD_DISABLED) ?
			  "Reached" : "Not reached");

	return 0;
}

int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
			 struct iwl_device_cmd *cmd)
{
	struct iwl_rx_packet *pkt = rxb_addr(rxb);
	struct iwl_radio_version_notif *radio_version = (void *)pkt->data;

	/* TODO: what to do with that? */
	IWL_DEBUG_INFO(mvm,
		       "Radio version: flavor: 0x%08x, step 0x%08x, dash 0x%08x\n",
		       le32_to_cpu(radio_version->radio_flavor),
		       le32_to_cpu(radio_version->radio_step),
		       le32_to_cpu(radio_version->radio_dash));
	return 0;
}