diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 3e49ae0..b85794d 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,10 +9,10 @@
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
 obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
 
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o
+obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
new file mode 100644
index 0000000..865daf0
--- /dev/null
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX25_OTG_SIC_SHIFT	29
+#define MX25_OTG_SIC_MASK	(0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT		(1 << 24)
+
+#define MX25_H1_SIC_SHIFT	21
+#define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PM_BIT		(1 << 8)
+#define MX25_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX25_H1_TLL_BIT		(1 << 5)
+#define MX25_H1_USBTE_BIT	(1 << 4)
+
+int mx25_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX25_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
+			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX25_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX25_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX25_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX25_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX25_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
new file mode 100644
index 0000000..fa69419
--- /dev/null
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX27_OTG_SIC_SHIFT	29
+#define MX27_OTG_SIC_MASK	(0x3 << MX27_OTG_SIC_SHIFT)
+#define MX27_OTG_PM_BIT		(1 << 24)
+
+#define MX27_H2_SIC_SHIFT	21
+#define MX27_H2_SIC_MASK	(0x3 << MX27_H2_SIC_SHIFT)
+#define MX27_H2_PM_BIT		(1 << 16)
+#define MX27_H2_DT_BIT		(1 << 5)
+
+#define MX27_H1_SIC_SHIFT	13
+#define MX27_H1_SIC_MASK	(0x3 << MX27_H1_SIC_SHIFT)
+#define MX27_H1_PM_BIT		(1 << 8)
+#define MX27_H1_DT_BIT		(1 << 4)
+
+int mx27_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_OTG_PM_BIT;
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX27_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX27_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index bc7294f..224d07a 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,8 +5,8 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o
+obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c
new file mode 100644
index 0000000..314a983
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx31.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mx31_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c
new file mode 100644
index 0000000..33983a4
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx35.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
+int mx35_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX35_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX35_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX35_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX35_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0d43be9..dc27288 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
new file mode 100644
index 0000000..7ce12c8
--- /dev/null
+++ b/arch/arm/mach-mx5/ehci.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define MXC_OTG_OFFSET			0
+#define MXC_H1_OFFSET			0x200
+#define MXC_H2_OFFSET			0x400
+
+/* USB_CTRL */
+#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
+#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
+
+/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
+
+/* USBH2CTRL */
+#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
+
+#define MXC_USBCMD_OFFSET		0x140
+
+/* USBCMD */
+#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
+
+int mx51_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+	void __iomem *usb_base;
+	void __iomem *usbotg_base;
+	void __iomem *usbother_base;
+	int ret = 0;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base) {
+		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	switch (port) {
+	case 0:	/* OTG port */
+		usbotg_base = usb_base + MXC_OTG_OFFSET;
+		break;
+	case 1:	/* Host 1 port */
+		usbotg_base = usb_base + MXC_H1_OFFSET;
+		break;
+	case 2: /* Host 2 port */
+		usbotg_base = usb_base + MXC_H2_OFFSET;
+		break;
+	default:
+		printk(KERN_ERR"%s no such port %d\n", __func__, port);
+		ret = -ENOENT;
+		goto error;
+	}
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	switch (port) {
+	case 0:	/*OTG port */
+		if (flags & MXC_EHCI_INTERNAL_PHY) {
+			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
+				/* OC/USBPWR is not used */
+				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			} else {
+				/* OC/USBPWR is used */
+				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			}
+			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+			if (flags & MXC_EHCI_WAKEUP_ENABLED)
+				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
+			else
+				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MXC_OTG_UCTRL_OPM_BIT;
+			else
+				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+		}
+		break;
+	case 1:	/* Host 1 */
+		/*Host ULPI */
+		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+			/* HOST1 wakeup/ULPI intr enable */
+			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+		} else {
+			/* HOST1 wakeup/ULPI intr disable */
+			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+		}
+
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+		else
+			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+
+		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
+		else
+			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
+		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
+		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
+			/* Interrupt Threshold Control:Immediate (no threshold) */
+			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
+		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
+		break;
+	case 2: /* Host 2 ULPI */
+		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+			/* HOST1 wakeup/ULPI intr enable */
+			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+		} else {
+			/* HOST1 wakeup/ULPI intr disable */
+			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+		}
+
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+		else
+			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
+		break;
+	}
+
+error:
+	iounmap(usb_base);
+	return ret;
+}
+
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 8772ce3..06fb3a4 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -14,352 +14,29 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <mach/mxc_ehci.h>
 
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
-
-#define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT		(1 << 16)
-#define MX31_H2_DT_BIT		(1 << 5)
-
-#define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT		(1 << 8)
-#define MX31_H1_DT_BIT		(1 << 4)
-
-#define MX35_OTG_SIC_SHIFT	29
-#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT		(1 << 24)
-
-#define MX35_H1_SIC_SHIFT	21
-#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PM_BIT		(1 << 8)
-#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX35_H1_TLL_BIT		(1 << 5)
-#define MX35_H1_USBTE_BIT	(1 << 4)
-
-#define MXC_OTG_OFFSET		0
-#define MXC_H1_OFFSET		0x200
-#define MXC_H2_OFFSET		0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT			(1 << 5)	/* UH1 Disable Overcurrent Event */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET			0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
 int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
-	unsigned int v;
 #if defined(CONFIG_SOC_IMX25)
-	if (cpu_is_mx25()) {
-		v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX35_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX35_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX35_H1_TLL_BIT;
-
-			if (flags & MXC_EHCI_INTERNAL_PHY)
-				v |= MX35_H1_USBTE_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_DOWN)
-				v |= MX35_H1_IPPUE_DOWN_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_UP)
-				v |= MX35_H1_IPPUE_UP_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
+	if (cpu_is_mx25())
+		return mx25_initialize_usb_hw(port, flags);
 #endif /* if defined(CONFIG_SOC_IMX25) */
 #if defined(CONFIG_ARCH_MX3)
-	if (cpu_is_mx31()) {
-		v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H1_DT_BIT;
-
-			break;
-		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H2_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H2_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H2_DT_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
-
-	if (cpu_is_mx35()) {
-		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX35_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX35_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX35_H1_TLL_BIT;
-
-			if (flags & MXC_EHCI_INTERNAL_PHY)
-				v |= MX35_H1_USBTE_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_DOWN)
-				v |= MX35_H1_IPPUE_DOWN_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_UP)
-				v |= MX35_H1_IPPUE_UP_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
+	if (cpu_is_mx31())
+		return mx31_initialize_usb_hw(port, flags);
+	if (cpu_is_mx35())
+		return mx35_initialize_usb_hw(port, flags);
 #endif /* CONFIG_ARCH_MX3 */
 #ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27()) {
-		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
-		 * are identical
-		 */
-		v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H1_DT_BIT;
-
-			break;
-		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H2_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H2_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H2_DT_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-		writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
+	if (cpu_is_mx27())
+		return mx27_initialize_usb_hw(port, flags);
 #endif /* CONFIG_MACH_MX27 */
 #ifdef CONFIG_SOC_IMX51
-	if (cpu_is_mx51()) {
-		void __iomem *usb_base;
-		void __iomem *usbotg_base;
-		void __iomem *usbother_base;
-		int ret = 0;
-
-		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
-		if (!usb_base) {
-			printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-			return -ENOMEM;
-		}
-
-		switch (port) {
-		case 0:	/* OTG port */
-			usbotg_base = usb_base + MXC_OTG_OFFSET;
-			break;
-		case 1:	/* Host 1 port */
-			usbotg_base = usb_base + MXC_H1_OFFSET;
-			break;
-		case 2: /* Host 2 port */
-			usbotg_base = usb_base + MXC_H2_OFFSET;
-			break;
-		default:
-			printk(KERN_ERR"%s no such port %d\n", __func__, port);
-			ret = -ENOENT;
-			goto error;
-		}
-		usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-		switch (port) {
-		case 0:	/*OTG port */
-			if (flags & MXC_EHCI_INTERNAL_PHY) {
-				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-					/* OC/USBPWR is not used */
-					v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-				} else {
-					/* OC/USBPWR is used */
-					v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-				}
-				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-				if (flags & MXC_EHCI_WAKEUP_ENABLED)
-					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-				else
-					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-					v |= MXC_OTG_UCTRL_OPM_BIT;
-				else
-					v &= ~MXC_OTG_UCTRL_OPM_BIT;
-				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-			}
-			break;
-		case 1:	/* Host 1 */
-			/*Host ULPI */
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-				/* HOST1 wakeup/ULPI intr enable */
-				v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-			} else {
-				/* HOST1 wakeup/ULPI intr disable */
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-			}
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-			else
-				v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-			else
-				v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-			if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-				/* Interrupt Threshold Control:Immediate (no threshold) */
-				v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-			__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-			break;
-		case 2: /* Host 2 ULPI */
-			v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-				/* HOST1 wakeup/ULPI intr enable */
-				v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-			} else {
-				/* HOST1 wakeup/ULPI intr disable */
-				v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-			}
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-			else
-				v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-			__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-			break;
-		}
-
-error:
-		iounmap(usb_base);
-		return ret;
-	}
+	if (cpu_is_mx51())
+		return mx51_initialize_usb_hw(port, flags);
 #endif
 	printk(KERN_WARNING
 		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index a523a40..7e555a1 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -50,5 +50,11 @@
 
 int mxc_initialize_usb_hw(int port, unsigned int flags);
 
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */