/*
 * AMD Alchemy PB1200 Referrence Board
 * Board Registers defines.
 *
 * ########################################################################
 *
 *  This program is free software; you can distribute it and/or modify it
 *  under the terms of the GNU General Public License (Version 2) as
 *  published by the Free Software Foundation.
 *
 *  This program is distributed in the hope it will be useful, but WITHOUT
 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 *  for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 *
 * ########################################################################
 *
 *
 */
#ifndef __ASM_PB1200_H
#define __ASM_PB1200_H

#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>

// This is defined in au1000.h with bogus value
#undef AU1X00_EXTERNAL_INT

#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX

/* SPI and SMB are muxed on the Pb1200 board.
   Refer to board documentation.
 */
#define SPI_PSC_BASE        PSC0_BASE_ADDR
#define SMBUS_PSC_BASE      PSC0_BASE_ADDR
/* AC97 and I2S are muxed on the Pb1200 board.
   Refer to board documentation.
 */
#define AC97_PSC_BASE       PSC1_BASE_ADDR
#define I2S_PSC_BASE		PSC1_BASE_ADDR

#define BCSR_KSEG1_ADDR 0xAD800000

typedef volatile struct
{
	/*00*/	u16 whoami;
		u16 reserved0;
	/*04*/	u16 status;
		u16 reserved1;
	/*08*/	u16 switches;
		u16 reserved2;
	/*0C*/	u16 resets;
		u16 reserved3;

	/*10*/	u16 pcmcia;
		u16 reserved4;
	/*14*/	u16 board;
		u16 reserved5;
	/*18*/	u16 disk_leds;
		u16 reserved6;
	/*1C*/	u16 system;
		u16 reserved7;

	/*20*/	u16 intclr;
		u16 reserved8;
	/*24*/	u16 intset;
		u16 reserved9;
	/*28*/	u16 intclr_mask;
		u16 reserved10;
	/*2C*/	u16 intset_mask;
		u16 reserved11;

	/*30*/	u16 sig_status;
		u16 reserved12;
	/*34*/	u16 int_status;
		u16 reserved13;
	/*38*/	u16 reserved14;
		u16 reserved15;
	/*3C*/	u16 reserved16;
		u16 reserved17;

} BCSR;

static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;

/*
 * Register bit definitions for the BCSRs
 */
#define BCSR_WHOAMI_DCID	0x000F
#define BCSR_WHOAMI_CPLD	0x00F0
#define BCSR_WHOAMI_BOARD	0x0F00

#define BCSR_STATUS_PCMCIA0VS	0x0003
#define BCSR_STATUS_PCMCIA1VS	0x000C
#define BCSR_STATUS_SWAPBOOT	0x0040
#define BCSR_STATUS_FLASHBUSY	0x0100
#define BCSR_STATUS_IDECBLID	0x0200
#define BCSR_STATUS_SD0WP		0x0400
#define BCSR_STATUS_SD1WP		0x0800
#define BCSR_STATUS_U0RXD		0x1000
#define BCSR_STATUS_U1RXD		0x2000

#define BCSR_SWITCHES_OCTAL	0x00FF
#define BCSR_SWITCHES_DIP_1	0x0080
#define BCSR_SWITCHES_DIP_2	0x0040
#define BCSR_SWITCHES_DIP_3	0x0020
#define BCSR_SWITCHES_DIP_4	0x0010
#define BCSR_SWITCHES_DIP_5	0x0008
#define BCSR_SWITCHES_DIP_6	0x0004
#define BCSR_SWITCHES_DIP_7	0x0002
#define BCSR_SWITCHES_DIP_8	0x0001
#define BCSR_SWITCHES_ROTARY	0x0F00

#define BCSR_RESETS_ETH		0x0001
#define BCSR_RESETS_CAMERA	0x0002
#define BCSR_RESETS_DC		0x0004
#define BCSR_RESETS_IDE		0x0008
/* not resets but in the same register */
#define BCSR_RESETS_WSCFSM  0x0800
#define BCSR_RESETS_PCS0MUX	0x1000
#define BCSR_RESETS_PCS1MUX	0x2000
#define BCSR_RESETS_SPISEL	0x4000
#define BCSR_RESETS_SD1MUX  0x8000

#define BCSR_PCMCIA_PC0VPP	0x0003
#define BCSR_PCMCIA_PC0VCC	0x000C
#define BCSR_PCMCIA_PC0DRVEN	0x0010
#define BCSR_PCMCIA_PC0RST	0x0080
#define BCSR_PCMCIA_PC1VPP	0x0300
#define BCSR_PCMCIA_PC1VCC	0x0C00
#define BCSR_PCMCIA_PC1DRVEN	0x1000
#define BCSR_PCMCIA_PC1RST	0x8000

#define BCSR_BOARD_LCDVEE	0x0001
#define BCSR_BOARD_LCDVDD	0x0002
#define BCSR_BOARD_LCDBL	0x0004
#define BCSR_BOARD_CAMSNAP	0x0010
#define BCSR_BOARD_CAMPWR	0x0020
#define BCSR_BOARD_SD0PWR	0x0040
#define BCSR_BOARD_SD1PWR	0x0080

#define BCSR_LEDS_DECIMALS	0x00FF
#define BCSR_LEDS_LED0		0x0100
#define BCSR_LEDS_LED1		0x0200
#define BCSR_LEDS_LED2		0x0400
#define BCSR_LEDS_LED3		0x0800

#define BCSR_SYSTEM_VDDI	0x001F
#define BCSR_SYSTEM_POWEROFF	0x4000
#define BCSR_SYSTEM_RESET	0x8000

/* Bit positions for the different interrupt sources */
#define BCSR_INT_IDE		0x0001
#define BCSR_INT_ETH		0x0002
#define BCSR_INT_PC0		0x0004
#define BCSR_INT_PC0STSCHG	0x0008
#define BCSR_INT_PC1		0x0010
#define BCSR_INT_PC1STSCHG	0x0020
#define BCSR_INT_DC			0x0040
#define BCSR_INT_FLASHBUSY	0x0080
#define BCSR_INT_PC0INSERT	0x0100
#define BCSR_INT_PC0EJECT	0x0200
#define BCSR_INT_PC1INSERT	0x0400
#define BCSR_INT_PC1EJECT	0x0800
#define BCSR_INT_SD0INSERT	0x1000
#define BCSR_INT_SD0EJECT	0x2000
#define BCSR_INT_SD1INSERT	0x4000
#define BCSR_INT_SD1EJECT	0x8000

/* PCMCIA Db1x00 specific defines */
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)

/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))

#define AU1XXX_SMC91111_PHYS_ADDR	(0x0D000300)
#define AU1XXX_SMC91111_IRQ			PB1200_ETH_INT

#define AU1XXX_ATA_PHYS_ADDR		(0x0C800000)
#define AU1XXX_ATA_REG_OFFSET		(5)
#define AU1XXX_ATA_PHYS_LEN		(16 << AU1XXX_ATA_REG_OFFSET)
#define AU1XXX_ATA_INT			PB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ		DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE		128

#define NAND_PHYS_ADDR   0x1C000000

/* Timing values as described in databook, * ns value stripped of
 * lower 2 bits.
 * These defines are here rather than an SOC1200 generic file because
 * the parts chosen on another board may be different and may require
 * different timings.
 */
#define NAND_T_H			(18 >> 2)
#define NAND_T_PUL			(30 >> 2)
#define NAND_T_SU			(30 >> 2)
#define NAND_T_WH			(30 >> 2)

/* Bitfield shift amounts */
#define NAND_T_H_SHIFT		0
#define NAND_T_PUL_SHIFT	4
#define NAND_T_SU_SHIFT		8
#define NAND_T_WH_SHIFT		12

#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)


/*
 * External Interrupts for Pb1200 as of 8/6/2004.
 * Bit positions in the CPLD registers can be calculated by taking
 * the interrupt define and subtracting the PB1200_INT_BEGIN value.
 *
 *   Example: IDE bis pos is  = 64 - 64
 *            ETH bit pos is  = 65 - 64
 */
enum external_pb1200_ints {
	PB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,

	PB1200_IDE_INT		= PB1200_INT_BEGIN,
	PB1200_ETH_INT,
	PB1200_PC0_INT,
	PB1200_PC0_STSCHG_INT,
	PB1200_PC1_INT,
	PB1200_PC1_STSCHG_INT,
	PB1200_DC_INT,
	PB1200_FLASHBUSY_INT,
	PB1200_PC0_INSERT_INT,
	PB1200_PC0_EJECT_INT,
	PB1200_PC1_INSERT_INT,
	PB1200_PC1_EJECT_INT,
	PB1200_SD0_INSERT_INT,
	PB1200_SD0_EJECT_INT,
	PB1200_SD1_INSERT_INT,
	PB1200_SD1_EJECT_INT,

	PB1200_INT_END		= PB1200_INT_BEGIN + 15
};

/* For drivers/pcmcia/au1000_db1x00.c */
#define BOARD_PC0_INT PB1200_PC0_INT
#define BOARD_PC1_INT PB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))

/* Nand chip select */
#define NAND_CS 1

#endif /* __ASM_PB1200_H */