Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Fix EV64120 and Ocelot builds by providing a plat_timer_setup().
[MIPS] EV64120: Fix PCI interrupt allocation.
[MIPS] Make irq number allocator generally available for fixing EV64120.
[MIPS] EV64120: Fix timer initialization for HZ != 100.
[MIPS] Ocelot 3: Fix MAC address detection after platform_device conversion.
[MIPS] Ocelot C: Fix MAC address detection after platform_device conversion.
[MIPS] SB1: On bootup only flush cache on local CPU.
[MIPS] Ocelot 3: Fix large number of warnings.
[MIPS] Ocelot C: Fix mapping of ioport address range.
[MIPS] Ocelot C: Fix warning about missmatching format string.
[MIPS] Ocelot C: fix eth registration after conversion to platform_device
[MIPS] Ocelot C: Fix large number of warnings.
diff --git a/arch/mips/gt64120/common/time.c b/arch/mips/gt64120/common/time.c
index c83ae6a..c47eeb7 100644
--- a/arch/mips/gt64120/common/time.c
+++ b/arch/mips/gt64120/common/time.c
@@ -64,14 +64,14 @@
* as *irq (=irq0 in ../kernel/time.c). We will do our own timer interrupt
* handling.
*/
-void gt64120_time_init(void)
+void __init plat_timer_setup(struct irqaction *irq)
{
static struct irqaction timer;
/* Disable timer first */
GT_WRITE(GT_TC_CONTROL_OFS, 0);
/* Load timer value for 100 Hz */
- GT_WRITE(GT_TC3_OFS, Sys_clock / 100);
+ GT_WRITE(GT_TC3_OFS, Sys_clock / HZ);
/*
* Create the IRQ structure entry for the timer. Since we're too early
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index 91c2d3f..99c8d42 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -68,7 +68,6 @@
* Initializes basic routines and structures pointers, memory size (as
* given by the bios and saves the command line.
*/
-extern void gt64120_time_init(void);
void __init plat_mem_setup(void)
{
@@ -76,7 +75,6 @@
_machine_halt = galileo_machine_halt;
pm_power_off = galileo_machine_power_off;
- board_time_init = gt64120_time_init;
set_io_port_base(KSEG1);
}
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 0e5bbee..94f94eb 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -70,7 +70,6 @@
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
-extern void gt64120_time_init(void);
extern void momenco_ocelot_irq_setup(void);
static char reset_reason;
@@ -156,8 +155,6 @@
void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
unsigned int tmpword;
- board_time_init = gt64120_time_init;
-
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
pm_power_off = momenco_ocelot_power_off;
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index dd24434..9b0e49d 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -26,6 +26,48 @@
#include <asm/system.h>
#include <asm/uaccess.h>
+static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
+
+int __devinit allocate_irqno(void)
+{
+ int irq;
+
+again:
+ irq = find_first_zero_bit(irq_map, NR_IRQS);
+
+ if (irq >= NR_IRQS)
+ return -ENOSPC;
+
+ if (test_and_set_bit(irq, irq_map))
+ goto again;
+
+ return irq;
+}
+
+EXPORT_SYMBOL_GPL(allocate_irqno);
+
+/*
+ * Allocate the 16 legacy interrupts for i8259 devices. This happens early
+ * in the kernel initialization so treating allocation failure as BUG() is
+ * ok.
+ */
+void __init alloc_legacy_irqno(void)
+{
+ int i;
+
+ for (i = 0; i <= 16; i++)
+ BUG_ON(test_and_set_bit(i, irq_map));
+}
+
+void __devinit free_irqno(unsigned int irq)
+{
+ smp_mb__before_clear_bit();
+ clear_bit(irq, irq_map);
+ smp_mb__after_clear_bit();
+}
+
+EXPORT_SYMBOL_GPL(free_irqno);
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index ea49a77..d0ddb4a 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -505,5 +505,5 @@
:
: "memory");
- flush_cache_all();
+ local_sb1___flush_cache_all();
}
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile
index 8bcea64d..d5a090a 100644
--- a/arch/mips/momentum/ocelot_3/Makefile
+++ b/arch/mips/momentum/ocelot_3/Makefile
@@ -5,4 +5,4 @@
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
-obj-y += irq.o prom.o reset.o setup.o
+obj-y += irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
index 227e429..5710a90 100644
--- a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
+++ b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
@@ -51,7 +51,9 @@
extern unsigned long ocelot_fpga_base;
-#define OCELOT_FPGA_WRITE(x, y) writeb(x, ocelot_fpga_base + OCELOT_3_REG_##y)
-#define OCELOT_FPGA_READ(x) readb(ocelot_fpga_base + OCELOT_3_REG_##x)
+#define __FPGA_REG_TO_ADDR(reg) \
+ ((void *) ocelot_fpga_base + OCELOT_3_REG_##reg)
+#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
+#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
#endif
diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c
new file mode 100644
index 0000000..eefe584
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/platform.c
@@ -0,0 +1,235 @@
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "ocelot_3_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE 0xfe000000UL
+#define MV_SRAM_SIZE (256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+#define MV64x60_IRQ_ETH_2 50
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+ [0] = {
+ .name = "eth0 irq",
+ .start = MV64x60_IRQ_ETH_0,
+ .end = MV64x60_IRQ_ETH_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+ .mac_addr = eth0_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH0,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
+ .resource = mv64x60_eth0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+ [0] = {
+ .name = "eth1 irq",
+ .start = MV64x60_IRQ_ETH_1,
+ .end = MV64x60_IRQ_ETH_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+ .mac_addr = eth1_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH1,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
+ .resource = mv64x60_eth1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+#ifdef CONFIG_MV643XX_ETH_2
+
+static struct resource mv64x60_eth2_resources[] = {
+ [0] = {
+ .name = "eth2 irq",
+ .start = MV64x60_IRQ_ETH_2,
+ .end = MV64x60_IRQ_ETH_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth2_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth2_pd = {
+ .mac_addr = eth2_mac_addr,
+};
+
+static struct platform_device eth2_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth2_resources),
+ .resource = mv64x60_eth2_resources,
+ .dev = {
+ .platform_data = ð2_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_2 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+ ð0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ ð1_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+ ð2_device,
+#endif
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+ unsigned int add)
+{
+ int i;
+
+ BUG_ON(add >= 256);
+
+ for (i = ETH_ALEN; i >= 0; i--) {
+ dst[i] = src[i] + add;
+ add = dst[i] < src[i]; /* compute carry */
+ }
+
+ WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+ unsigned char mac[ETH_ALEN];
+ int ret;
+
+ get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+ eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+ eth_mac_add(eth2_mac_addr, mac, 2);
+#endif
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index 296d945..6ce9b7f 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -34,64 +34,11 @@
extern unsigned long marvell_base;
extern unsigned long cpu_clock;
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
-
const char *get_system_type(void)
{
return "Momentum Ocelot-3";
}
-#ifdef CONFIG_MV643XX_ETH
-void burn_clocks(void)
-{
- int i;
-
- /* this loop should burn at least 1us -- this should be plenty */
- for (i = 0; i < 0x10000; i++)
- ;
-}
-
-u8 exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock on */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock off and read-strobe */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-#endif
-
-
#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
@@ -228,11 +175,6 @@
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_3;
-#ifdef CONFIG_MV643XX_ETH
- /* get the base MAC address for on-board ethernet ports */
- get_mac(prom_mac_addr_base);
-#endif
-
#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index 7d74f8c..ff0829f 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -4,7 +4,7 @@
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot-3 board dependent boot routines
*
- * Copyright (C) 1996, 1997, 01, 05 Ralf Baechle
+ * Copyright (C) 1996, 1997, 01, 05 - 06 Ralf Baechle
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
index 94802b4..d69161a 100644
--- a/arch/mips/momentum/ocelot_c/Makefile
+++ b/arch/mips/momentum/ocelot_c/Makefile
@@ -2,7 +2,7 @@
# Makefile for Momentum Computer's Ocelot-C and -CS boards.
#
-obj-y += cpci-irq.o irq.o prom.o reset.o \
+obj-y += cpci-irq.o irq.o platform.o prom.o reset.o \
setup.o uart-irq.o
obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
index 7228cd1..f0f5581 100644
--- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
+++ b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
@@ -53,7 +53,9 @@
#define OCELOT_C_REG_INTSET 0xe
#define OCELOT_C_REG_INTCLR 0xf
-#define OCELOT_FPGA_WRITE(x, y) writeb(x, OCELOT_C_CS0_ADDR + OCELOT_C_REG_##y)
-#define OCELOT_FPGA_READ(x) readb(OCELOT_C_CS0_ADDR + OCELOT_C_REG_##x)
+#define __FPGA_REG_TO_ADDR(reg) \
+ ((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg)
+#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
+#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
#endif
diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c
new file mode 100644
index 0000000..6c495b2
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/platform.c
@@ -0,0 +1,201 @@
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "ocelot_c_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE 0xfe000000UL
+#define MV_SRAM_SIZE (256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+ [0] = {
+ .name = "eth0 irq",
+ .start = MV64x60_IRQ_ETH_0,
+ .end = MV64x60_IRQ_ETH_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+ .mac_addr = eth0_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH0,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
+ .resource = mv64x60_eth0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+ [0] = {
+ .name = "eth1 irq",
+ .start = MV64x60_IRQ_ETH_1,
+ .end = MV64x60_IRQ_ETH_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+ .mac_addr = eth1_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH1,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
+ .resource = mv64x60_eth1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+ ð0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ ð1_device,
+#endif
+ /* The third port is not wired up on the Ocelot C */
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+ unsigned int add)
+{
+ int i;
+
+ BUG_ON(add >= 256);
+
+ for (i = ETH_ALEN; i >= 0; i--) {
+ dst[i] = src[i] + add;
+ add = dst[i] < src[i]; /* compute carry */
+ }
+
+ WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+ unsigned char mac[ETH_ALEN];
+ int ret;
+
+ get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+ eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
index 4c50a14..d0b77e1 100644
--- a/arch/mips/momentum/ocelot_c/prom.c
+++ b/arch/mips/momentum/ocelot_c/prom.c
@@ -29,11 +29,7 @@
struct callvectors* debug_vectors;
extern unsigned long marvell_base;
-extern unsigned long cpu_clock;
-
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
+extern unsigned int cpu_clock;
const char *get_system_type(void)
{
@@ -44,55 +40,6 @@
#endif
}
-#ifdef CONFIG_MV643XX_ETH
-static void burn_clocks(void)
-{
- int i;
-
- /* this loop should burn at least 1us -- this should be plenty */
- for (i = 0; i < 0x10000; i++)
- ;
-}
-
-static u8 exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock on */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock off and read-strobe */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-#endif
-
-
#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
@@ -226,11 +173,6 @@
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_C;
-#ifdef CONFIG_MV643XX_ETH
- /* get the base MAC address for on-board ethernet ports */
- get_mac(prom_mac_addr_base);
-#endif
-
#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 9c0c462..0b6b233 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -69,8 +69,7 @@
#include "ocelot_c_fpga.h"
unsigned long marvell_base;
-extern unsigned long mv64340_sram_base;
-unsigned long cpu_clock;
+unsigned int cpu_clock;
/* These functions are used for rebooting or halting the machine*/
extern void momenco_ocelot_restart(char *command);
@@ -119,7 +118,6 @@
add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
marvell_base = 0xfffffffff4000000;
- mv64340_sram_base = 0xfffffffffe000000;
#else
/* marvell and extra space */
add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K);
@@ -129,7 +127,6 @@
add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
marvell_base = 0xf4000000;
- mv64340_sram_base = 0xfe000000;
#endif
}
@@ -346,22 +343,20 @@
}
}
-#ifndef CONFIG_64BIT
-/* This needs to be one of the first initcalls, because no I/O port access
- can work before this */
+/*
+ * This needs to be one of the first initcalls, because no I/O port access
+ * can work before this
+ */
static int io_base_ioremap(void)
{
- /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
- void *io_remap_range = ioremap(0xc0000000, 0x30000000);
+ void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000);
- if (!io_remap_range) {
+ if (!io_remap_range)
panic("Could not ioremap I/O port range");
- }
- printk("io_remap_range set at 0x%08x\n", (uint32_t)io_remap_range);
- set_io_port_base(io_remap_range - 0xc0000000);
+
+ set_io_port_base((unsigned long) io_remap_range);
return 0;
}
module_init(io_base_ioremap);
-#endif
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 3cf0dd4..70cb55b 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,7 +26,7 @@
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
-obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o
+obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
diff --git a/arch/mips/pci/fixup-ev64120.c b/arch/mips/pci/fixup-ev64120.c
deleted file mode 100644
index 8dbb90d..0000000
--- a/arch/mips/pci/fixup-ev64120.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/pci.h>
-#include <linux/init.h>
-
-int pci_range_ck(unsigned char bus, unsigned char dev)
-{
- if (((bus == 0) || (bus == 1)) && (dev >= 6) && (dev <= 8))
- return 0;
-
- return -1;
-}
-
-/*
- * After detecting all agents over the PCI , this function is called
- * in order to give an interrupt number for each PCI device starting
- * from IRQ 20. It does also enables master for each device.
- */
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
- unsigned int irq = 20;
- struct pci_bus *current_bus = bus;
- struct pci_dev *dev;
- struct list_head *devices_link;
-
- list_for_each(devices_link, &(current_bus->devices)) {
- dev = pci_dev_b(devices_link);
- if (dev != NULL) {
- dev->irq = irq++;
-
- /* Assign an interrupt number for the device */
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
- pcibios_set_master(dev);
- }
- }
-}
diff --git a/arch/mips/pci/pci-ev64120.c b/arch/mips/pci/pci-ev64120.c
new file mode 100644
index 0000000..9cd859e
--- /dev/null
+++ b/arch/mips/pci/pci-ev64120.c
@@ -0,0 +1,21 @@
+#include <linux/pci.h>
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (!pin)
+ return 0;
+
+ irq = allocate_irqno();
+ if (irq < 0)
+ return 0;
+
+ return irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index f01ba1f..270ecd3 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -354,29 +354,6 @@
.end = end_bridge_irq,
};
-static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
-
-int allocate_irqno(void)
-{
- int irq;
-
-again:
- irq = find_first_zero_bit(irq_map, NR_IRQS);
-
- if (irq >= NR_IRQS)
- return -ENOSPC;
-
- if (test_and_set_bit(irq, irq_map))
- goto again;
-
- return irq;
-}
-
-void free_irqno(unsigned int irq)
-{
- clear_bit(irq, irq_map);
-}
-
void __devinit register_bridge_irq(unsigned int irq)
{
irq_desc[irq].status = IRQ_DISABLED;
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index c965705..5e82a26 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -214,8 +214,6 @@
.name = "timer"
};
-extern int allocate_irqno(void);
-
void __init plat_timer_setup(struct irqaction *irq)
{
int irqno = allocate_irqno();
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 0ce2a80..35a05ca 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -74,4 +74,8 @@
unsigned long hwmask);
#endif /* CONFIG_MIPS_MT_SMTC */
+extern int allocate_irqno(void);
+extern void alloc_legacy_irqno(void);
+extern void free_irqno(unsigned int irq);
+
#endif /* _ASM_IRQ_H */
