[PATCH] myri10ge: use netif_msg_link
Add msg_enable and use netif_msg_link to enable/disable reporting
of link status changes since some Ethernet switches seem to generate
a lot of status changes under some circumstances and some people
want to avoid useless flooding in the logs.
Also add a counter for link status changes to statistics.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c0c41ca..a79afe2 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -192,6 +192,8 @@
u32 read_dma;
u32 write_dma;
u32 read_write_dma;
+ u32 link_changes;
+ u32 msg_enable;
};
static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
@@ -257,6 +259,12 @@
MODULE_PARM_DESC(myri10ge_max_irq_loops,
"Set stuck legacy IRQ detection threshold\n");
+#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
+
+static int myri10ge_debug = -1; /* defaults above */
+module_param(myri10ge_debug, int, 0);
+MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -764,6 +772,7 @@
mgp->rx_small.cnt = 0;
mgp->rx_done.idx = 0;
mgp->rx_done.cnt = 0;
+ mgp->link_changes = 0;
status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
myri10ge_change_promisc(mgp, 0, 0);
myri10ge_change_pause(mgp, mgp->pause);
@@ -1085,13 +1094,19 @@
if (mgp->link_state != stats->link_up) {
mgp->link_state = stats->link_up;
if (mgp->link_state) {
- printk(KERN_INFO "myri10ge: %s: link up\n",
- mgp->dev->name);
+ if (netif_msg_link(mgp))
+ printk(KERN_INFO
+ "myri10ge: %s: link up\n",
+ mgp->dev->name);
netif_carrier_on(mgp->dev);
+ mgp->link_changes++;
} else {
- printk(KERN_INFO "myri10ge: %s: link down\n",
- mgp->dev->name);
+ if (netif_msg_link(mgp))
+ printk(KERN_INFO
+ "myri10ge: %s: link down\n",
+ mgp->dev->name);
netif_carrier_off(mgp->dev);
+ mgp->link_changes++;
}
}
if (mgp->rdma_tags_available !=
@@ -1293,8 +1308,9 @@
"serial_number", "tx_pkt_start", "tx_pkt_done",
"tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
"wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
- "link_up", "dropped_link_overflow", "dropped_link_error_or_filtered",
- "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
+ "link_changes", "link_up", "dropped_link_overflow",
+ "dropped_link_error_or_filtered", "dropped_runt",
+ "dropped_overrun", "dropped_no_small_buffer",
"dropped_no_big_buffer"
};
@@ -1345,6 +1361,7 @@
data[i++] = (unsigned int)mgp->stop_queue;
data[i++] = (unsigned int)mgp->watchdog_resets;
data[i++] = (unsigned int)mgp->tx_linearized;
+ data[i++] = (unsigned int)mgp->link_changes;
data[i++] = (unsigned int)ntohl(mgp->fw_stats->link_up);
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow);
data[i++] =
@@ -1355,6 +1372,18 @@
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_big_buffer);
}
+static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ mgp->msg_enable = value;
+}
+
+static u32 myri10ge_get_msglevel(struct net_device *netdev)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ return mgp->msg_enable;
+}
+
static struct ethtool_ops myri10ge_ethtool_ops = {
.get_settings = myri10ge_get_settings,
.get_drvinfo = myri10ge_get_drvinfo,
@@ -1375,7 +1404,9 @@
#endif
.get_strings = myri10ge_get_strings,
.get_stats_count = myri10ge_get_stats_count,
- .get_ethtool_stats = myri10ge_get_ethtool_stats
+ .get_ethtool_stats = myri10ge_get_ethtool_stats,
+ .set_msglevel = myri10ge_set_msglevel,
+ .get_msglevel = myri10ge_get_msglevel
};
static int myri10ge_allocate_rings(struct net_device *dev)
@@ -2587,6 +2618,7 @@
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
mgp->pause = myri10ge_flow_control;
mgp->intr_coal_delay = myri10ge_intr_coal_delay;
+ mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
init_waitqueue_head(&mgp->down_wq);
if (pci_enable_device(pdev)) {
