qd65xx: remove pointless qd_{read,write}_reg() (take 2)
These functions are atomic so locking is pointless (noticed by Sergei).
v2:
We can now just use local_irq_save/restore() in qd_testreg() (noticed by Jeff).
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index ffd9c05..912e738 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -89,28 +89,6 @@
static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */
-static DEFINE_SPINLOCK(qd65xx_lock);
-
-static void qd_write_reg (u8 content, unsigned long reg)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&qd65xx_lock, flags);
- outb(content,reg);
- spin_unlock_irqrestore(&qd65xx_lock, flags);
-}
-
-static u8 __init qd_read_reg (unsigned long reg)
-{
- unsigned long flags;
- u8 read;
-
- spin_lock_irqsave(&qd65xx_lock, flags);
- read = inb(reg);
- spin_unlock_irqrestore(&qd65xx_lock, flags);
- return read;
-}
-
/*
* qd_select:
*
@@ -123,7 +101,7 @@
(QD_TIMREG(drive) & 0x02);
if (timings[index] != QD_TIMING(drive))
- qd_write_reg(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
+ outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
}
/*
@@ -286,7 +264,7 @@
}
if (!HWIF(drive)->channel && drive->media != ide_disk) {
- qd_write_reg(0x5f, QD_CONTROL_PORT);
+ outb(0x5f, QD_CONTROL_PORT);
printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO "
"and post-write buffer on %s.\n",
drive->name, HWIF(drive)->name);
@@ -306,12 +284,12 @@
unsigned long flags;
u8 savereg, readreg;
- spin_lock_irqsave(&qd65xx_lock, flags);
+ local_irq_save(flags);
savereg = inb_p(port);
outb_p(QD_TESTVAL, port); /* safe value */
readreg = inb_p(port);
outb(savereg, port);
- spin_unlock_irqrestore(&qd65xx_lock, flags);
+ local_irq_restore(flags);
if (savereg == QD_TESTVAL) {
printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n");
@@ -365,13 +343,13 @@
if (set_pio_mode == (void *)qd6500_set_pio_mode) {
// will do it for both
- qd_write_reg(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
+ outb(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
} else if (set_pio_mode == (void *)qd6580_set_pio_mode) {
if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
- qd_write_reg(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
- qd_write_reg(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
+ outb(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
+ outb(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
} else {
- qd_write_reg(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
+ outb(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
}
} else {
printk(KERN_WARNING "Unknown qd65xx tuning fonction !\n");
@@ -394,7 +372,7 @@
u8 config;
u8 unit;
- config = qd_read_reg(QD_CONFIG_PORT);
+ config = inb(QD_CONFIG_PORT);
if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) )
return 1;
@@ -438,7 +416,7 @@
/* qd6580 found */
- control = qd_read_reg(QD_CONTROL_PORT);
+ control = inb(QD_CONTROL_PORT);
printk(KERN_NOTICE "qd6580 at %#x\n", base);
printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
@@ -459,7 +437,7 @@
ide_device_add(idx);
- qd_write_reg(QD_DEF_CONTR, QD_CONTROL_PORT);
+ outb(QD_DEF_CONTR, QD_CONTROL_PORT);
return 1;
} else {
@@ -486,7 +464,7 @@
ide_device_add(idx);
- qd_write_reg(QD_DEF_CONTR, QD_CONTROL_PORT);
+ outb(QD_DEF_CONTR, QD_CONTROL_PORT);
return 0; /* no other qd65xx possible */
}
