ide: add ->cable_detect method to ide_hwif_t
* Add ->cable_detect method to ide_hwif_t.
* Call the new method in ide_init_port() if:
- the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
- DMA initialization was successful (if hwif->dma_base is not set
ide_init_port() sets hwif->ultra_mask to zero)
- "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')
* Convert PCI host drivers to use ->cable_detect method.
While at it:
* Factor out cable detection to separate functions (if not already done).
* hpt366.c/it8213.c/slc90e66.c:
- don't check cable type if "idex=ata66" is used
* pdc202xx_new.c:
- add __devinit tag to pdcnew_cable_detect()
* pdc202xx_old.c:
- rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
- add __devinit tag to pdc2026x_old_cable_detect()
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 824df78..ca302fc 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -166,6 +166,16 @@
return dev->irq;
}
+static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x49, &ata66);
+
+ return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -174,21 +184,10 @@
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->set_dma_mode = &aec6210_set_mode;
- else
+ else {
hwif->set_dma_mode = &aec6260_set_mode;
- if (hwif->dma_base == 0)
- return;
-
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x49, &ata66);
-
- hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = atp86x_cable_detect;
}
}
