Merge master.kernel.org:/home/rmk/linux-2.6-arm
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
new file mode 100644
index 0000000..a7e4c4e
--- /dev/null
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -0,0 +1,168 @@
+README for MIPS AU1XXX IDE driver - Released 2005-07-15
+
+ABOUT
+-----
+This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
+services they provide.
+
+If you are short in patience and just want to know how to add your hard disc to
+the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
+section.
+
+
+LICENSE
+-------
+
+Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+675 Mass Ave, Cambridge, MA 02139, USA.
+
+Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ Interface and Linux Device Driver" Application Note.
+
+
+FILES, CONFIGS AND COMPATABILITY
+--------------------------------
+
+Two files are introduced:
+
+ a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+ containes : struct _auide_hwif
+ struct drive_list_entry dma_white_list
+ struct drive_list_entry dma_black_list
+ timing parameters for PIO mode 0/1/2/3/4
+ timing parameters for MWDMA 0/1/2
+
+ b) 'drivers/ide/mips/au1xxx-ide.c'
+ contains the functionality of the AU1XXX IDE driver
+
+Four configs variables are introduced:
+
+ CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
+ controler
+ CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
+ per descriptor
+
+If MWDMA is enabled and the connected hard disc is not on the white list, the
+kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
+performance is substantial slower then in full speed mwdma. In this case
+please add your hard disc to the white list (follow instruction from 'ADD NEW
+HARD DISC TO WHITE OR BLACK LIST' section).
+
+
+SUPPORTED IDE MODES
+-------------------
+
+The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
+MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
+
+To change the PIO mode use the program hdparm with option -p, e.g.
+'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
+-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
+
+
+PERFORMANCE CONFIGURATIONS
+--------------------------
+
+If the used system doesn't need USB support enable the following kernel configs:
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+If the used system need the USB support enable the following kernel configs for
+high IDE to USB throughput.
+
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+
+ADD NEW HARD DISC TO WHITE OR BLACK LIST
+----------------------------------------
+
+Step 1 : detect the model name of your hard disc
+
+ a) connect your hard disc to the AU1XXX
+
+ b) boot your kernel and get the hard disc model.
+
+ Example boot log:
+
+ --snipped--
+ Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
+ ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
+ Au1xxx IDE(builtin) configured for MWDMA2
+ Probing IDE interface ide0...
+ hda: Maxtor 6E040L0, ATA DISK drive
+ ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
+ hda: max request size: 64KiB
+ hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
+ --snipped--
+
+ In this example 'Maxtor 6E040L0'.
+
+Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+
+ Add your hard disc to the dma_white_list or dma_black_list structur.
+
+Step 3 : Recompile the kernel
+
+ Enable MWDMA support in the kernel configuration. Recompile the kernel and
+ reboot.
+
+Step 4 : Tests
+
+ If you have add a hard disc to the white list, please run some stress tests
+ for verification.
+
+
+ACKNOWLEDGMENTS
+---------------
+
+These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
+IDE driver from AMD.
+
+Additional input also from:
+Matthias Lenk <matthias.lenk@amd.com>
+
+Happy hacking!
+Enrico Walther <enrico.walther@amd.com>
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index b433c8a..65895bb 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -309,7 +309,7 @@
can be consumed by a single TSO frame.
The setting of this parameter is a choice between burstiness and
building larger TSO frames.
- Default: 8
+ Default: 3
tcp_frto - BOOLEAN
Enables F-RTO, an enhanced recovery algorithm for TCP retransmission
diff --git a/MAINTAINERS b/MAINTAINERS
index 770155a..e88d193 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1643,7 +1643,7 @@
MIPS
P: Ralf Baechle
M: ralf@linux-mips.org
-W: http://oss.sgi.com/mips/mips-howto.html
+W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
S: Maintained
@@ -1945,6 +1945,14 @@
L: netdev@vger.kernel.org
S: Supported
+POWERPC 4xx EMAC DRIVER
+P: Eugene Surovegin
+M: ebs@ebshome.net
+W: http://kernel.ebshome.net/emac/
+L: linuxppc-embedded@ozlabs.org
+L: netdev@vger.kernel.org
+S: Maintained
+
PNP SUPPORT
P: Adam Belay
M: ambx1@neo.rr.com
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 23434b5..50f13ee 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -30,7 +30,7 @@
#define putstr icedcc_putstr
#define putc icedcc_putc
-extern void idedcc_putc(int ch);
+extern void icedcc_putc(int ch);
static void
icedcc_putstr(const char *ptr)
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index 8d6558b..f43b734 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -221,6 +221,7 @@
clock_was_set();
return 0;
}
+EXPORT_SYMBOL(do_settimeofday);
/*
* Scheduler clock - returns current time in nanosec units.
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cd724c..0097a0d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,15 +4,1318 @@
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
-# shouldn't it be per-subarchitecture?
-config ARCH_MAY_HAVE_PC_FDC
- bool
- default y
-
mainmenu "Linux/MIPS Kernel Configuration"
source "init/Kconfig"
+menu "Machine selection"
+
+choice
+ prompt "System type"
+ default SGI_IP22
+
+config MIPS_MTX1
+ bool "Support for 4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SOC_AU1500
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_BOSPORUS
+ bool "AMD Alchemy Bosporus board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1000
+ bool "AMD Alchemy PB1000 board"
+ select SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1100
+ bool "AMD Alchemy PB1100 board"
+ select SOC_AU1100
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1500
+ bool "AMD Alchemy PB1500 board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1550
+ bool "AMD Alchemy PB1550 board"
+ select SOC_AU1550
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1200
+ bool "AMD Alchemy PB1200 board"
+ select SOC_AU1200
+ select DMA_NONCOHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1000
+ bool "AMD Alchemy DB1000 board"
+ select SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1100
+ bool "AMD Alchemy DB1100 board"
+ select SOC_AU1100
+ select DMA_NONCOHERENT
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1500
+ bool "AMD Alchemy DB1500 board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1550
+ bool "AMD Alchemy DB1550 board"
+ select SOC_AU1550
+ select HW_HAS_PCI
+ select DMA_NONCOHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1200
+ bool "AMD Alchemy DB1200 board"
+ select SOC_AU1200
+ select DMA_COHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_MIRAGE
+ bool "AMD Alchemy Mirage board"
+ select DMA_NONCOHERENT
+ select SOC_AU1500
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_COBALT
+ bool "Support for Cobalt Server"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select I8259
+ select IRQ_CPU
+ select MIPS_GT64111
+ select SYS_HAS_CPU_NEVADA
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MACH_DECSTATION
+ bool "Support for DECstations"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select EARLY_PRINTK
+ select IRQ_CPU
+ select SYS_HAS_CPU_R3000
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for DEC's MIPS based workstations. For details
+ see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
+ DECstation porting pages on <http://decstation.unix-ag.org/>.
+
+ If you have one of the following DECstation Models you definitely
+ want to choose R4xx0 for the CPU Type:
+
+ DECstation 5000/50
+ DECstation 5000/150
+ DECstation 5000/260
+ DECsystem 5900/260
+
+ otherwise choose R3000.
+
+config MIPS_EV64120
+ bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_GT64120
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This is an evaluation board based on the Galileo GT-64120
+ single-chip system controller that contains a MIPS R5000 compatible
+ core running at 75/100MHz. Their website is located at
+ <http://www.marvell.com/>. Say Y here if you wish to build a
+ kernel for this platform.
+
+config MIPS_EV96100
+ bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select MIPS_GT96100
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R5000
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This is an evaluation board based on the Galileo GT-96100 LAN/WAN
+ communications controllers containing a MIPS R5000 compatible core
+ running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
+ here if you wish to build a kernel for this platform.
+
+config MIPS_IVR
+ bool "Support for Globespan IVR board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select ITE_BOARD_GEN
+ select SYS_HAS_CPU_NEVADA
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is an evaluation board built by Globespan to showcase thir
+ iVR (Internet Video Recorder) design. It utilizes a QED RM5231
+ R5000 MIPS core. More information can be found out their website
+ located at <http://www.globespan.net/>. Say Y here if you wish to
+ build a kernel for this platform.
+
+config MIPS_ITE8172
+ bool "Support for ITE 8172G board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select ITE_BOARD_GEN
+ select SYS_HAS_CPU_R5432
+ select SYS_HAS_CPU_NEVADA
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
+ with ATX form factor that utilizes a MIPS R5000 to work with its
+ ITE8172G companion internet appliance chip. The MIPS core can be
+ either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
+ a kernel for this platform.
+
+config MACH_JAZZ
+ bool "Support for the Jazz family of machines"
+ select ARC
+ select ARC32
+ select ARCH_MAY_HAVE_PC_FDC
+ select GENERIC_ISA_DMA
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ help
+ This a family of machines based on the MIPS R4030 chipset which was
+ used by several vendors to build RISC/os and Windows NT workstations.
+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+ Olivetti M700-10 workstations.
+
+config LASAT
+ bool "Support for LASAT Networks platforms"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_GT64120
+ select MIPS_NILE4
+ select R5000_CPU_SCACHE
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_ATLAS
+ bool "Support for MIPS Atlas board"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+ select MIPS_BOARDS_GEN
+ select MIPS_BONITO64
+ select MIPS_GT64120
+ select MIPS_MSC
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the MIPS Technologies Atlas evaluation
+ board.
+
+config MIPS_MALTA
+ bool "Support for MIPS Malta board"
+ select ARCH_MAY_HAVE_PC_FDC
+ select BOOT_ELF32
+ select HAVE_STD_PC_SERIAL_PORT
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select GENERIC_ISA_DMA
+ select HW_HAS_PCI
+ select I8259
+ select MIPS_BOARDS_GEN
+ select MIPS_BONITO64
+ select MIPS_GT64120
+ select MIPS_MSC
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the MIPS Technologies Malta evaluation
+ board.
+
+config MIPS_SEAD
+ bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select IRQ_CPU
+ select DMA_NONCOHERENT
+ select MIPS_BOARDS_GEN
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the MIPS Technologies SEAD evaluation
+ board.
+
+config MIPS_SIM
+ bool 'Support for MIPS simulator (MIPSsim)'
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This option enables support for MIPS Technologies MIPSsim software
+ emulator.
+
+config MOMENCO_JAGUAR_ATX
+ bool "Support for Momentum Jaguar board"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_MV64340
+ select LIMITED_DMA
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT
+ bool "Support for Momentum Ocelot board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select MIPS_GT64120
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_3
+ bool "Support for Momentum Ocelot-3 board"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_MV64340
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot-3 is based off Discovery III System Controller and
+ PMC-Sierra Rm79000 core.
+
+config MOMENCO_OCELOT_C
+ bool "Support for Momentum Ocelot-C board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_MV64340
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_G
+ bool "Support for Momentum Ocelot-G board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MIPS_XXS1500
+ bool "Support for MyCable XXS1500 board"
+ select DMA_NONCOHERENT
+ select SOC_AU1500
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_V2PCI
+ bool "Support for Philips PNX8550 based Viper2-PCI board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_JBS
+ bool "Support for Philips PNX8550 based JBS board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config DDB5074
+ bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DDB5XXX_COMMON
+ select DMA_NONCOHERENT
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the VR5000-based NEC DDB Vrc-5074
+ evaluation board.
+
+config DDB5476
+ bool "Support for NEC DDB Vrc-5476"
+ select DDB5XXX_COMMON
+ select DMA_NONCOHERENT
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R5432
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the R5432-based NEC DDB Vrc-5476
+ evaluation board.
+
+ Features : kernel debugging, serial terminal, NFS root fs, on-board
+ ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
+ IDE controller, PS2 keyboard, PS2 mouse, etc.
+
+config DDB5477
+ bool "Support for NEC DDB Vrc-5477"
+ select DDB5XXX_COMMON
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select I8259
+ select IRQ_CPU
+ select SYS_HAS_CPU_R5432
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the R5432-based NEC DDB Vrc-5477,
+ or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
+
+ Features : kernel debugging, serial terminal, NFS root fs, on-board
+ ether port USB, AC97, PCI, etc.
+
+config MACH_VR41XX
+ bool "Support for NEC VR4100 series based machines"
+ select SYS_HAS_CPU_VR41XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+
+config PMC_YOSEMITE
+ bool "Support for PMC-Sierra Yosemite eval board"
+ select DMA_COHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_CPU_RM9K
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ help
+ Yosemite is an evaluation board for the RM9000x2 processor
+ manufactured by PMC-Sierra.
+
+config QEMU
+ bool "Support for Qemu"
+ select DMA_COHERENT
+ select GENERIC_ISA_DMA
+ select HAVE_STD_PC_SERIAL_PORT
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ Qemu is a software emulator which among other architectures also
+ can simulate a MIPS32 4Kc system. This patch adds support for the
+ system architecture that currently is being simulated by Qemu. It
+ will eventually be removed again when Qemu has the capability to
+ simulate actual MIPS hardware platforms. More information on Qemu
+ can be found at http://www.linux-mips.org/wiki/Qemu.
+
+config SGI_IP22
+ bool "Support for SGI IP22 (Indy/Indigo2)"
+ select ARC
+ select ARC32
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_EISA
+ select IP22_CPU_SCACHE
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R4X00
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This are the SGI Indy, Challenge S and Indigo2, as well as certain
+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel
+ that runs on these, say Y here.
+
+config SGI_IP27
+ bool "Support for SGI IP27 (Origin200/2000)"
+ select ARC
+ select ARC64
+ select BOOT_ELF64
+ select DMA_IP27
+ select HW_HAS_PCI
+ select PCI_DOMAINS
+ select SYS_HAS_CPU_R10000
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
+ workstations. To compile a Linux kernel that runs on these, say Y
+ here.
+
+config SGI_IP32
+ bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select ARC
+ select ARC32
+ select BOOT_ELF32
+ select OWN_DMA
+ select DMA_IP32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select R5000_CPU_SCACHE
+ select RM7000_CPU_SCACHE
+ select SYS_HAS_CPU_R5000
+ select SYS_HAS_CPU_R10000 if BROKEN
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ If you want this kernel to run on SGI O2 workstation, say Y here.
+
+config SIBYTE_BIGSUR
+ bool "Support for Sibyte BigSur"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select PCI_DOMAINS
+ select SIBYTE_BCM1x80
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_SWARM
+ bool "Support for Sibyte BCM91250A-SWARM"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_SENTOSA
+ bool "Support for Sibyte BCM91250E-Sentosa"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_RHONE
+ bool "Support for Sibyte BCM91125E-Rhone"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1125H
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_CARMEL
+ bool "Support for Sibyte BCM91120x-Carmel"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1120
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_PTSWARM
+ bool "Support for Sibyte BCM91250PT-PTSWARM"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_LITTLESUR
+ bool "Support for Sibyte BCM91250C2-LittleSur"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_CRHINE
+ bool "Support for Sibyte BCM91120C-CRhine"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1120
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_CRHONE
+ bool "Support for Sibyte BCM91125C-CRhone"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1125
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SNI_RM200_PCI
+ bool "Support for SNI RM200 PCI"
+ select ARC
+ select ARC32
+ select ARCH_MAY_HAVE_PC_FDC
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select GENERIC_ISA_DMA
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_EISA
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
+ Nixdorf Informationssysteme (SNI), parent company of Pyramid
+ Technology and now in turn merged with Fujitsu. Say Y here to
+ support this machine type.
+
+config TOSHIBA_JMR3927
+ bool "Support for Toshiba JMR-TX3927 board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_TX3927
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX39XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select TOSHIBA_BOARDS
+
+config TOSHIBA_RBTX4927
+ bool "Support for Toshiba TBTX49[23]7 board"
+ select DMA_NONCOHERENT
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select TOSHIBA_BOARDS
+ help
+ This Toshiba board is based on the TX4927 processor. Say Y here to
+ support this machine type
+
+config TOSHIBA_RBTX4938
+ bool "Support for Toshiba RBTX4938 board"
+ select HAVE_STD_PC_SERIAL_PORT
+ select DMA_NONCOHERENT
+ select GENERIC_ISA_DMA
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select TOSHIBA_BOARDS
+ help
+ This Toshiba board is based on the TX4938 processor. Say Y here to
+ support this machine type
+
+endchoice
+
+source "arch/mips/ddb5xxx/Kconfig"
+source "arch/mips/gt64120/ev64120/Kconfig"
+source "arch/mips/jazz/Kconfig"
+source "arch/mips/ite-boards/Kconfig"
+source "arch/mips/lasat/Kconfig"
+source "arch/mips/momentum/Kconfig"
+source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/sgi-ip27/Kconfig"
+source "arch/mips/sibyte/Kconfig"
+source "arch/mips/tx4927/Kconfig"
+source "arch/mips/tx4938/Kconfig"
+source "arch/mips/vr41xx/Kconfig"
+source "arch/mips/philips/pnx8550/common/Kconfig"
+
+endmenu
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+#
+# Select some configuration options automatically based on user selections.
+#
+config ARC
+ bool
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+
+config DMA_COHERENT
+ bool
+
+config DMA_IP27
+ bool
+
+config DMA_IP32
+ bool
+ select DMA_NEED_PCI_MAP_STATE
+
+config DMA_NONCOHERENT
+ bool
+ select DMA_NEED_PCI_MAP_STATE
+
+config DMA_NEED_PCI_MAP_STATE
+ bool
+
+config OWN_DMA
+ bool
+
+config EARLY_PRINTK
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+config I8259
+ bool
+
+config LIMITED_DMA
+ bool
+ select HIGHMEM
+ select SYS_SUPPORTS_HIGHMEM
+
+config MIPS_BONITO64
+ bool
+
+config MIPS_MSC
+ bool
+
+config MIPS_NILE4
+ bool
+
+config MIPS_DISABLE_OBSOLETE_IDE
+ bool
+
+#
+# Endianess selection. Suffiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices. Also the use of a
+# choice statement should be more obvious to the user.
+#
+choice
+ prompt "Endianess selection"
+ help
+ Some MIPS machines can be configured for either little or big endian
+ byte order. These modes require different kernels and a different
+ Linux distribution. In general there is one prefered byteorder for a
+ particular system but some systems are just as commonly used in the
+ one or the other endianess.
+
+config CPU_BIG_ENDIAN
+ bool "Big endian"
+ depends on SYS_SUPPORTS_BIG_ENDIAN
+
+config CPU_LITTLE_ENDIAN
+ bool "Little endian"
+ depends on SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+
+endchoice
+
+config SYS_SUPPORTS_BIG_ENDIAN
+ bool
+
+config SYS_SUPPORTS_LITTLE_ENDIAN
+ bool
+
+config IRQ_CPU
+ bool
+
+config IRQ_CPU_RM7K
+ bool
+
+config IRQ_CPU_RM9K
+ bool
+
+config IRQ_MV64340
+ bool
+
+config DDB5XXX_COMMON
+ bool
+
+config MIPS_BOARDS_GEN
+ bool
+
+config MIPS_GT64111
+ bool
+
+config MIPS_GT64120
+ bool
+
+config MIPS_TX3927
+ bool
+ select HAS_TXX9_SERIAL
+
+config PCI_MARVELL
+ bool
+
+config ITE_BOARD_GEN
+ bool
+
+config SOC_AU1000
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1100
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1500
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1550
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1200
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1X00
+ bool
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+
+config PNX8550
+ bool
+ select SOC_PNX8550
+
+config SOC_PNX8550
+ bool
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+
+config SWAP_IO_SPACE
+ bool
+
+#
+# Unfortunately not all GT64120 systems run the chip at the same clock.
+# As the user for the clock rate and try to minimize the available options.
+#
+choice
+ prompt "Galileo Chip Clock"
+ #default SYSCLK_83 if MIPS_EV64120
+ depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+ default SYSCLK_83 if MIPS_EV64120
+ default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
+
+config SYSCLK_75
+ bool "75" if MIPS_EV64120
+
+config SYSCLK_83
+ bool "83.3" if MIPS_EV64120
+
+config SYSCLK_100
+ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+
+endchoice
+
+config ARC32
+ bool
+
+config AU1X00_USB_DEVICE
+ bool
+ depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
+ default n
+
+config MIPS_GT96100
+ bool
+ select MIPS_GT64120
+
+config IT8172_CIR
+ bool
+ depends on MIPS_ITE8172 || MIPS_IVR
+ default y
+
+config IT8712
+ bool
+ depends on MIPS_ITE8172
+ default y
+
+config BOOT_ELF32
+ bool
+
+config MIPS_L1_CACHE_SHIFT
+ int
+ default "4" if MACH_DECSTATION
+ default "7" if SGI_IP27
+ default "5"
+
+config HAVE_STD_PC_SERIAL_PORT
+ bool
+
+config ARC_CONSOLE
+ bool "ARC console support"
+ depends on SGI_IP22 || SNI_RM200_PCI
+
+config ARC_MEMORY
+ bool
+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
+ default y
+
+config ARC_PROMLIB
+ bool
+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
+ default y
+
+config ARC64
+ bool
+
+config BOOT_ELF64
+ bool
+
+config TOSHIBA_BOARDS
+ bool
+
+menu "CPU selection"
+
+choice
+ prompt "CPU type"
+ default CPU_R4X00
+
+config CPU_MIPS32_R1
+ bool "MIPS32 Release 1"
+ depends on SYS_HAS_CPU_MIPS32_R1
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 1 or later of the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ Release 2 of the MIPS32 architecture is available since several
+ years so chances are you even have a MIPS32 Release 2 processor
+ in which case you should choose CPU_MIPS32_R2 instead for better
+ performance.
+
+config CPU_MIPS32_R2
+ bool "MIPS32 Release 2"
+ depends on SYS_HAS_CPU_MIPS32_R2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 2 or later of the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+
+config CPU_MIPS64_R1
+ bool "MIPS64 Release 1"
+ depends on SYS_HAS_CPU_MIPS64_R1
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 1 or later of the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ Release 2 of the MIPS64 architecture is available since several
+ years so chances are you even have a MIPS64 Release 2 processor
+ in which case you should choose CPU_MIPS64_R2 instead for better
+ performance.
+
+config CPU_MIPS64_R2
+ bool "MIPS64 Release 2"
+ depends on SYS_HAS_CPU_MIPS64_R2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 2 or later of the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+
+config CPU_R3000
+ bool "R3000"
+ depends on SYS_HAS_CPU_R3000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ help
+ Please make sure to pick the right CPU type. Linux/MIPS is not
+ designed to be generic, i.e. Kernels compiled for R3000 CPUs will
+ *not* work on R4000 machines and vice versa. However, since most
+ of the supported machines have an R4000 (or similar) CPU, R4x00
+ might be a safe bet. If the resulting kernel does not work,
+ try to recompile with R3000.
+
+config CPU_TX39XX
+ bool "R39XX"
+ depends on SYS_HAS_CPU_TX39XX
+ select CPU_SUPPORTS_32BIT_KERNEL
+
+config CPU_VR41XX
+ bool "R41xx"
+ depends on SYS_HAS_CPU_VR41XX
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ The options selects support for the NEC VR4100 series of processors.
+ Only choose this option if you have one of these processors as a
+ kernel built with this option will not run on any other type of
+ processor or vice versa.
+
+config CPU_R4300
+ bool "R4300"
+ depends on SYS_HAS_CPU_R4300
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R4300-series processors.
+
+config CPU_R4X00
+ bool "R4x00"
+ depends on SYS_HAS_CPU_R4X00
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R4000-series processors other than 4300, including
+ the R4000, R4400, R4600, and 4700.
+
+config CPU_TX49XX
+ bool "R49XX"
+ depends on SYS_HAS_CPU_TX49XX
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+
+config CPU_R5000
+ bool "R5000"
+ depends on SYS_HAS_CPU_R5000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R5000-series processors other than the Nevada.
+
+config CPU_R5432
+ bool "R5432"
+ depends on SYS_HAS_CPU_R5432
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+
+config CPU_R6000
+ bool "R6000"
+ depends on EXPERIMENTAL
+ depends on SYS_HAS_CPU_R6000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ help
+ MIPS Technologies R6000 and R6000A series processors. Note these
+ processors are extremly rare and the support for them is incomplete.
+
+config CPU_NEVADA
+ bool "RM52xx"
+ depends on SYS_HAS_CPU_NEVADA
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ QED / PMC-Sierra RM52xx-series ("Nevada") processors.
+
+config CPU_R8000
+ bool "R8000"
+ depends on EXPERIMENTAL
+ depends on SYS_HAS_CPU_R8000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R8000 processors. Note these processors are
+ uncommon and the support for them is incomplete.
+
+config CPU_R10000
+ bool "R10000"
+ depends on SYS_HAS_CPU_R10000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ help
+ MIPS Technologies R10000-series processors.
+
+config CPU_RM7000
+ bool "RM7000"
+ depends on SYS_HAS_CPU_RM7000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+config CPU_RM9000
+ bool "RM9000"
+ depends on SYS_HAS_CPU_RM9000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+config CPU_SB1
+ bool "SB1"
+ depends on SYS_HAS_CPU_SB1
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+endchoice
+
+config SYS_HAS_CPU_MIPS32_R1
+ bool
+
+config SYS_HAS_CPU_MIPS32_R2
+ bool
+
+config SYS_HAS_CPU_MIPS64_R1
+ bool
+
+config SYS_HAS_CPU_MIPS64_R2
+ bool
+
+config SYS_HAS_CPU_R3000
+ bool
+
+config SYS_HAS_CPU_TX39XX
+ bool
+
+config SYS_HAS_CPU_VR41XX
+ bool
+
+config SYS_HAS_CPU_R4300
+ bool
+
+config SYS_HAS_CPU_R4X00
+ bool
+
+config SYS_HAS_CPU_TX49XX
+ bool
+
+config SYS_HAS_CPU_R5000
+ bool
+
+config SYS_HAS_CPU_R5432
+ bool
+
+config SYS_HAS_CPU_R6000
+ bool
+
+config SYS_HAS_CPU_NEVADA
+ bool
+
+config SYS_HAS_CPU_R8000
+ bool
+
+config SYS_HAS_CPU_R10000
+ bool
+
+config SYS_HAS_CPU_RM7000
+ bool
+
+config SYS_HAS_CPU_RM9000
+ bool
+
+config SYS_HAS_CPU_SB1
+ bool
+
+endmenu
+
+#
+# These two indicate any levelof the MIPS32 and MIPS64 architecture
+#
+config CPU_MIPS32
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+
+config CPU_MIPS64
+ bool
+ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+
+#
+# These two indicate the revision of the architecture, either 32 bot 64 bit.
+#
+config CPU_MIPSR1
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
+
+config CPU_MIPSR2
+ bool
+ default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+
config SYS_SUPPORTS_32BIT_KERNEL
bool
config SYS_SUPPORTS_64BIT_KERNEL
@@ -39,7 +1342,6 @@
select TRAD_SIGNALS
help
Select this option if you want to build a 32-bit kernel.
-
config 64BIT
bool "64-bit kernel"
depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
@@ -48,1306 +1350,6 @@
endchoice
-endmenu
-
-menu "Machine selection"
-
-config MACH_JAZZ
- bool "Support for the Jazz family of machines"
- select ARC
- select ARC32
- select GENERIC_ISA_DMA
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This a family of machines based on the MIPS R4030 chipset which was
- used by several vendors to build RISC/os and Windows NT workstations.
- Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
- Olivetti M700-10 workstations.
-
-config ACER_PICA_61
- bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
- depends on MACH_JAZZ && EXPERIMENTAL
- select DMA_NONCOHERENT
- help
- This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
- kernel that runs on these, say Y here. For details about Linux on
- the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
- <http://www.linux-mips.org/>.
-
-config MIPS_MAGNUM_4000
- bool "Support for MIPS Magnum 4000"
- depends on MACH_JAZZ
- select DMA_NONCOHERENT
- help
- This is a machine with a R4000 100 MHz CPU. To compile a Linux
- kernel that runs on these, say Y here. For details about Linux on
- the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
- <http://www.linux-mips.org/>.
-
-config OLIVETTI_M700
- bool "Support for Olivetti M700-10"
- depends on MACH_JAZZ
- select DMA_NONCOHERENT
- help
- This is a machine with a R4000 100 MHz CPU. To compile a Linux
- kernel that runs on these, say Y here. For details about Linux on
- the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
- <http://www.linux-mips.org/>.
-
-config MACH_VR41XX
- bool "Support for NEC VR4100 series based machines"
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config NEC_CMBVR4133
- bool "Support for NEC CMB-VR4133"
- depends on MACH_VR41XX
- select CPU_VR41XX
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
-
-config ROCKHOPPER
- bool "Support for Rockhopper baseboard"
- depends on NEC_CMBVR4133
- select I8259
- select HAVE_STD_PC_SERIAL_PORT
-
-config CASIO_E55
- bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ISA
-
-config IBM_WORKPAD
- bool "Support for IBM WorkPad z50"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ISA
-
-config TANBAC_TB022X
- bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
- help
- The TANBAC VR4131 multichip module(TB0225) and
- the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
- manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/>
- about VR4131 multichip module and VR4131DIMM.
-
-config TANBAC_TB0226
- bool "Support for TANBAC Mbase(TB0226)"
- depends on TANBAC_TB022X
- select GPIO_VR41XX
- help
- The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about Mbase.
-
-config TANBAC_TB0287
- bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
- depends on TANBAC_TB022X
- help
- The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
-
-config VICTOR_MPC30X
- bool "Support for Victor MP-C303/304"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
-
-config ZAO_CAPCELLA
- bool "Support for ZAO Networks Capcella"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
-
-config PCI_VR41XX
- bool "Add PCI control unit support of NEC VR4100 series"
- depends on MACH_VR41XX && HW_HAS_PCI
- default y
- select PCI
-
-config VRC4173
- tristate "Add NEC VRC4173 companion chip support"
- depends on MACH_VR41XX && PCI_VR41XX
- ---help---
- The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
-
-config TOSHIBA_JMR3927
- bool "Support for Toshiba JMR-TX3927 board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
-
-config MIPS_COBALT
- bool "Support for Cobalt Server"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select I8259
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config MACH_DECSTATION
- bool "Support for DECstations"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- ---help---
- This enables support for DEC's MIPS based workstations. For details
- see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
- DECstation porting pages on <http://decstation.unix-ag.org/>.
-
- If you have one of the following DECstation Models you definitely
- want to choose R4xx0 for the CPU Type:
-
- DECstation 5000/50
- DECstation 5000/150
- DECstation 5000/260
- DECsystem 5900/260
-
- otherwise choose R3000.
-
-config MIPS_EV64120
- bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_GT64120
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This is an evaluation board based on the Galileo GT-64120
- single-chip system controller that contains a MIPS R5000 compatible
- core running at 75/100MHz. Their website is located at
- <http://www.marvell.com/>. Say Y here if you wish to build a
- kernel for this platform.
-
-config EVB_PCI1
- bool "Enable Second PCI (PCI1)"
- depends on MIPS_EV64120
-
-config MIPS_EV96100
- bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select MIPS_GT96100
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This is an evaluation board based on the Galileo GT-96100 LAN/WAN
- communications controllers containing a MIPS R5000 compatible core
- running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
- here if you wish to build a kernel for this platform.
-
-config MIPS_IVR
- bool "Support for Globespan IVR board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This is an evaluation board built by Globespan to showcase thir
- iVR (Internet Video Recorder) design. It utilizes a QED RM5231
- R5000 MIPS core. More information can be found out their website
- located at <http://www.globespan.net/>. Say Y here if you wish to
- build a kernel for this platform.
-
-config LASAT
- bool "Support for LASAT Networks platforms"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_GT64120
- select R5000_CPU_SCACHE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config PICVUE
- tristate "PICVUE LCD display driver"
- depends on LASAT
-
-config PICVUE_PROC
- tristate "PICVUE LCD display driver /proc interface"
- depends on PICVUE
-
-config DS1603
- bool "DS1603 RTC driver"
- depends on LASAT
-
-config LASAT_SYSCTL
- bool "LASAT sysctl interface"
- depends on LASAT
-
-config MIPS_ITE8172
- bool "Support for ITE 8172G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
- with ATX form factor that utilizes a MIPS R5000 to work with its
- ITE8172G companion internet appliance chip. The MIPS core can be
- either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
- a kernel for this platform.
-
-config IT8172_REVC
- bool "Support for older IT8172 (Rev C)"
- depends on MIPS_ITE8172
- help
- Say Y here to support the older, Revision C version of the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
-config MIPS_ATLAS
- bool "Support for MIPS Atlas board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_GT64120
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This enables support for the QED R5231-based MIPS Atlas evaluation
- board.
-
-config MIPS_MALTA
- bool "Support for MIPS Malta board"
- select BOOT_ELF32
- select HAVE_STD_PC_SERIAL_PORT
- select DMA_NONCOHERENT
- select GENERIC_ISA_DMA
- select HW_HAS_PCI
- select I8259
- select MIPS_GT64120
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This enables support for the VR5000-based MIPS Malta evaluation
- board.
-
-config MIPS_SEAD
- bool "Support for MIPS SEAD board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select IRQ_CPU
- select DMA_NONCOHERENT
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-config MOMENCO_OCELOT
- bool "Support for Momentum Ocelot board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select MIPS_GT64120
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MOMENCO_OCELOT_G
- bool "Support for Momentum Ocelot-G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MOMENCO_OCELOT_C
- bool "Support for Momentum Ocelot-C board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_MV64340
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MOMENCO_OCELOT_3
- bool "Support for Momentum Ocelot-3 board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_MV64340
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot-3 is based off Discovery III System Controller and
- PMC-Sierra Rm79000 core.
-
-config MOMENCO_JAGUAR_ATX
- bool "Support for Momentum Jaguar board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_MV64340
- select LIMITED_DMA
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config JAGUAR_DMALOW
- bool "Low DMA Mode"
- depends on MOMENCO_JAGUAR_ATX
- help
- Select to Y if jump JP5 is set on your board, N otherwise. Normally
- the jumper is set, so if you feel unsafe, just say Y.
-
-config PMC_YOSEMITE
- bool "Support for PMC-Sierra Yosemite eval board"
- select DMA_COHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_CPU_RM9K
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- Yosemite is an evaluation board for the RM9000x2 processor
- manufactured by PMC-Sierra
-
-config HYPERTRANSPORT
- bool "Hypertransport Support for PMC-Sierra Yosemite"
- depends on PMC_YOSEMITE
-
-config DDB5074
- bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This enables support for the VR5000-based NEC DDB Vrc-5074
- evaluation board.
-
-config DDB5476
- bool "Support for NEC DDB Vrc-5476"
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This enables support for the R5432-based NEC DDB Vrc-5476
- evaluation board.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
- IDE controller, PS2 keyboard, PS2 mouse, etc.
-
-config DDB5477
- bool "Support for NEC DDB Vrc-5477"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select I8259
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This enables support for the R5432-based NEC DDB Vrc-5477,
- or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, etc.
-
-config DDB5477_BUS_FREQUENCY
- int "bus frequency (in kHZ, 0 for auto-detect)"
- depends on DDB5477
- default 0
-
-config QEMU
- bool "Support for Qemu"
- select DMA_COHERENT
- select GENERIC_ISA_DMA
- select HAVE_STD_PC_SERIAL_PORT
- select I8259
- select ISA
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- Qemu is a software emulator which among other architectures also
- can simulate a MIPS32 4Kc system. This patch adds support for the
- system architecture that currently is being simulated by Qemu. It
- will eventually be removed again when Qemu has the capability to
- simulate actual MIPS hardware platforms. More information on Qemu
- can be found at http://www.linux-mips.org/wiki/Qemu.
-
-config SGI_IP22
- bool "Support for SGI IP22 (Indy/Indigo2)"
- select ARC
- select ARC32
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select IP22_CPU_SCACHE
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This are the SGI Indy, Challenge S and Indigo2, as well as certain
- OEM variants like the Tandem CMN B006S. To compile a Linux kernel
- that runs on these, say Y here.
-
-config SGI_IP27
- bool "Support for SGI IP27 (Origin200/2000)"
- select ARC
- select ARC64
- select DMA_IP27
- select HW_HAS_PCI
- select PCI_DOMAINS
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
- workstations. To compile a Linux kernel that runs on these, say Y
- here.
-
-#config SGI_SN0_XXL
-# bool "IP27 XXL"
-# depends on SGI_IP27
-# This options adds support for userspace processes upto 16TB size.
-# Normally the limit is just .5TB.
-
-config SGI_SN0_N_MODE
- bool "IP27 N-Mode"
- depends on SGI_IP27
- help
- The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
- configured in either N-Modes which allows for more nodes or M-Mode
- which allows for more memory. Your system is most probably
- running in M-Mode, so you should say N here.
-
-config ARCH_DISCONTIGMEM_ENABLE
- bool
- default y if SGI_IP27
- help
- Say Y to upport efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
-
-config NUMA
- bool "NUMA Support"
- depends on SGI_IP27
- help
- Say Y to compile the kernel to support NUMA (Non-Uniform Memory
- Access). This option is for configuring high-end multiprocessor
- server machines. If in doubt, say N.
-
-config MAPPED_KERNEL
- bool "Mapped kernel support"
- depends on SGI_IP27
- help
- Change the way a Linux kernel is loaded into memory on a MIPS64
- machine. This is required in order to support text replication and
- NUMA. If you need to understand it, read the source code.
-
-config REPLICATE_KTEXT
- bool "Kernel text replication support"
- depends on SGI_IP27
- help
- Say Y here to enable replicating the kernel text across multiple
- nodes in a NUMA cluster. This trades memory for speed.
-
-config REPLICATE_EXHANDLERS
- bool "Exception handler replication support"
- depends on SGI_IP27
- help
- Say Y here to enable replicating the kernel exception handlers
- across multiple nodes in a NUMA cluster. This trades memory for
- speed.
-
-config SGI_IP32
- bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select ARC
- select ARC32
- select BOOT_ELF32
- select OWN_DMA
- select DMA_IP32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select R5000_CPU_SCACHE
- select RM7000_CPU_SCACHE
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- If you want this kernel to run on SGI O2 workstation, say Y here.
-
-config SOC_AU1X00
- bool "Support for AMD/Alchemy Au1X00 SOCs"
- select SYS_SUPPORTS_32BIT_KERNEL
-
-choice
- prompt "Au1X00 SOC Type"
- depends on SOC_AU1X00
- help
- Say Y here to enable support for one of three AMD/Alchemy
- SOCs. For additional documentation see www.amd.com.
-
-config SOC_AU1000
- bool "SOC_AU1000"
-config SOC_AU1100
- bool "SOC_AU1100"
-config SOC_AU1500
- bool "SOC_AU1500"
-config SOC_AU1550
- bool "SOC_AU1550"
-
-endchoice
-
-choice
- prompt "AMD/Alchemy Au1x00 board support"
- depends on SOC_AU1X00
- help
- These are evaluation boards built by AMD/Alchemy to
- showcase their Au1X00 Internet Edge Processors. The SOC design
- is based on the MIPS32 architecture running at 266/400/500MHz
- with many integrated peripherals. Further information can be
- found at their website, <http://www.amd.com/>. Say Y here if you
- wish to build a kernel for this platform.
-
-config MIPS_PB1000
- bool "PB1000 board"
- depends on SOC_AU1000
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SWAP_IO_SPACE
-
-config MIPS_PB1100
- bool "PB1100 board"
- depends on SOC_AU1100
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SWAP_IO_SPACE
-
-config MIPS_PB1500
- bool "PB1500 board"
- depends on SOC_AU1500
- select DMA_COHERENT
- select HW_HAS_PCI
-
-config MIPS_PB1550
- bool "PB1550 board"
- depends on SOC_AU1550
- select DMA_COHERENT
- select HW_HAS_PCI
- select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1000
- bool "DB1000 board"
- depends on SOC_AU1000
- select DMA_NONCOHERENT
- select HW_HAS_PCI
-
-config MIPS_DB1100
- bool "DB1100 board"
- depends on SOC_AU1100
- select DMA_NONCOHERENT
-
-config MIPS_DB1500
- bool "DB1500 board"
- depends on SOC_AU1500
- select DMA_COHERENT
- select HW_HAS_PCI
- select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1550
- bool "DB1550 board"
- depends on SOC_AU1550
- select HW_HAS_PCI
- select DMA_COHERENT
- select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_BOSPORUS
- bool "Bosporus board"
- depends on SOC_AU1500
- select DMA_NONCOHERENT
-
-config MIPS_MIRAGE
- bool "Mirage board"
- depends on SOC_AU1500
- select DMA_NONCOHERENT
-
-config MIPS_XXS1500
- bool "MyCable XXS1500 board"
- depends on SOC_AU1500
- select DMA_NONCOHERENT
-
-config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- depends on SOC_AU1500
- select HW_HAS_PCI
- select DMA_NONCOHERENT
-
-endchoice
-
-config SIBYTE_SB1xxx_SOC
- bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-choice
- prompt "BCM1xxx SOC-based board"
- depends on SIBYTE_SB1xxx_SOC
- default SIBYTE_SWARM
- help
- Enable support for boards based on the SiByte line of SOCs
- from Broadcom. There are configurations for the known
- evaluation boards, or you can choose "Other" and add your
- own board support code.
-
-config SIBYTE_SWARM
- bool "BCM91250A-SWARM"
- select SIBYTE_SB1250
-
-config SIBYTE_SENTOSA
- bool "BCM91250E-Sentosa"
- select SIBYTE_SB1250
-
-config SIBYTE_RHONE
- bool "BCM91125E-Rhone"
- select SIBYTE_BCM1125H
-
-config SIBYTE_CARMEL
- bool "BCM91120x-Carmel"
- select SIBYTE_BCM1120
-
-config SIBYTE_PTSWARM
- bool "BCM91250PT-PTSWARM"
- select SIBYTE_SB1250
-
-config SIBYTE_LITTLESUR
- bool "BCM91250C2-LittleSur"
- select SIBYTE_SB1250
-
-config SIBYTE_CRHINE
- bool "BCM91120C-CRhine"
- select SIBYTE_BCM1120
-
-config SIBYTE_CRHONE
- bool "BCM91125C-CRhone"
- select SIBYTE_BCM1125
-
-config SIBYTE_UNKNOWN
- bool "Other"
-
-endchoice
-
-config SIBYTE_BOARD
- bool
- depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
- default y
-
-choice
- prompt "BCM1xxx SOC Type"
- depends on SIBYTE_UNKNOWN
- default SIBYTE_UNK_BCM1250
- help
- Since you haven't chosen a known evaluation board from
- Broadcom, you must explicitly pick the SOC this kernel is
- targetted for.
-
-config SIBYTE_UNK_BCM1250
- bool "BCM1250"
- select SIBYTE_SB1250
-
-config SIBYTE_UNK_BCM1120
- bool "BCM1120"
- select SIBYTE_BCM1120
-
-config SIBYTE_UNK_BCM1125
- bool "BCM1125"
- select SIBYTE_BCM1125
-
-config SIBYTE_UNK_BCM1125H
- bool "BCM1125H"
- select SIBYTE_BCM1125H
-
-endchoice
-
-config SIBYTE_SB1250
- bool
- select HW_HAS_PCI
-
-config SIBYTE_BCM1120
- bool
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125
- bool
- select HW_HAS_PCI
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125H
- bool
- select HW_HAS_PCI
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM112X
- bool
-
-choice
- prompt "SiByte SOC Stepping"
- depends on SIBYTE_SB1xxx_SOC
-
-config CPU_SB1_PASS_1
- bool "1250 Pass1"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
-
-config CPU_SB1_PASS_2_1250
- bool "1250 An"
- depends on SIBYTE_SB1250
- select CPU_SB1_PASS_2
- help
- Also called BCM1250 Pass 2
-
-config CPU_SB1_PASS_2_2
- bool "1250 Bn"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
- help
- Also called BCM1250 Pass 2.2
-
-config CPU_SB1_PASS_4
- bool "1250 Cn"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
- help
- Also called BCM1250 Pass 3
-
-config CPU_SB1_PASS_2_112x
- bool "112x Hybrid"
- depends on SIBYTE_BCM112X
- select CPU_SB1_PASS_2
-
-config CPU_SB1_PASS_3
- bool "112x An"
- depends on SIBYTE_BCM112X
- select CPU_HAS_PREFETCH
-
-endchoice
-
-config CPU_SB1_PASS_2
- bool
-
-config SIBYTE_HAS_LDT
- bool
- depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
- default y
-
-config SIMULATION
- bool "Running under simulation"
- depends on SIBYTE_SB1xxx_SOC
- help
- Build a kernel suitable for running under the GDB simulator.
- Primarily adjusts the kernel's notion of time.
-
-config SIBYTE_CFE
- bool "Booting from CFE"
- depends on SIBYTE_SB1xxx_SOC
- help
- Make use of the CFE API for enumerating available memory,
- controlling secondary CPUs, and possibly console output.
-
-config SIBYTE_CFE_CONSOLE
- bool "Use firmware console"
- depends on SIBYTE_CFE
- help
- Use the CFE API's console write routines during boot. Other console
- options (VT console, sb1250 duart console, etc.) should not be
- configured.
-
-config SIBYTE_STANDALONE
- bool
- depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
- default y
-
-config SIBYTE_STANDALONE_RAM_SIZE
- int "Memory size (in megabytes)"
- depends on SIBYTE_STANDALONE
- default "32"
-
-config SIBYTE_BUS_WATCHER
- bool "Support for Bus Watcher statistics"
- depends on SIBYTE_SB1xxx_SOC
- help
- Handle and keep statistics on the bus error interrupts (COR_ECC,
- BAD_ECC, IO_BUS).
-
-config SIBYTE_BW_TRACE
- bool "Capture bus trace before bus error"
- depends on SIBYTE_BUS_WATCHER
- help
- Run a continuous bus trace, dumping the raw data as soon as
- a ZBbus error is detected. Cannot work if ZBbus profiling
- is turned on, and also will interfere with JTAG-based trace
- buffer activity. Raw buffer data is dumped to console, and
- must be processed off-line.
-
-config SIBYTE_SB1250_PROF
- bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
- depends on SIBYTE_SB1xxx_SOC
-
-config SIBYTE_TBPROF
- bool "Support for ZBbus profiling"
- depends on SIBYTE_SB1xxx_SOC
-
-config SNI_RM200_PCI
- bool "Support for SNI RM200 PCI"
- select ARC
- select ARC32
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select GENERIC_ISA_DMA
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
- Nixdorf Informationssysteme (SNI), parent company of Pyramid
- Technology and now in turn merged with Fujitsu. Say Y here to
- support this machine type.
-
-config TOSHIBA_RBTX4927
- bool "Support for Toshiba TBTX49[23]7 board"
- select DMA_NONCOHERENT
- select HAS_TXX9_SERIAL
- select HW_HAS_PCI
- select I8259
- select ISA
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This Toshiba board is based on the TX4927 processor. Say Y here to
- support this machine type
-
-config TOSHIBA_FPCIB0
- bool "FPCIB0 Backplane Support"
- depends on TOSHIBA_RBTX4927
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-#
-# Select some configuration options automatically based on user selections.
-#
-config ARC
- bool
- depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
- default y
-
-config DMA_COHERENT
- bool
-
-config DMA_IP27
- bool
-
-config DMA_IP32
- bool
- select DMA_NEED_PCI_MAP_STATE
-
-config DMA_NONCOHERENT
- bool
- select DMA_NEED_PCI_MAP_STATE
-
-config DMA_NEED_PCI_MAP_STATE
- bool
-
-config EARLY_PRINTK
- bool
- depends on MACH_DECSTATION
- default y
-
-config GENERIC_ISA_DMA
- bool
- depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
- default y
-
-config I8259
- bool
- depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
- default y
-
-config LIMITED_DMA
- bool
- select HIGHMEM
-
-config MIPS_BONITO64
- bool
- depends on MIPS_ATLAS || MIPS_MALTA
- default y
-
-config MIPS_MSC
- bool
- depends on MIPS_ATLAS || MIPS_MALTA
- default y
-
-config MIPS_NILE4
- bool
- depends on LASAT
- default y
-
-config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-config CPU_LITTLE_ENDIAN
- bool "Generate little endian code"
- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
- default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
- help
- Some MIPS machines can be configured for either little or big endian
- byte order. These modes require different kernels. Say Y if your
- machine is little endian, N if it's a big endian machine.
-
-config IRQ_CPU
- bool
-
-config IRQ_CPU_RM7K
- bool
-
-config IRQ_MV64340
- bool
-
-config DDB5XXX_COMMON
- bool
- depends on DDB5074 || DDB5476 || DDB5477
- default y
-
-config MIPS_BOARDS_GEN
- bool
- depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
- default y
-
-config MIPS_GT64111
- bool
- depends on MIPS_COBALT
- default y
-
-config MIPS_GT64120
- bool
- depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
- default y
-
-config MIPS_TX3927
- bool
- depends on TOSHIBA_JMR3927
- select HAS_TXX9_SERIAL
- default y
-
-config PCI_MARVELL
- bool
-
-config ITE_BOARD_GEN
- bool
- depends on MIPS_IVR || MIPS_ITE8172
- default y
-
-config SWAP_IO_SPACE
- bool
-
-#
-# Unfortunately not all GT64120 systems run the chip at the same clock.
-# As the user for the clock rate and try to minimize the available options.
-#
-choice
- prompt "Galileo Chip Clock"
- #default SYSCLK_83 if MIPS_EV64120
- depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
- default SYSCLK_83 if MIPS_EV64120
- default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
-
-config SYSCLK_75
- bool "75" if MIPS_EV64120
-
-config SYSCLK_83
- bool "83.3" if MIPS_EV64120
-
-config SYSCLK_100
- bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
-
-endchoice
-
-config AU1X00_USB_DEVICE
- bool
- depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
- default n
-
-config MIPS_GT96100
- bool
- depends on MIPS_EV96100
- default y
- help
- Say Y here to support the Galileo Technology GT96100 communications
- controller card. There is a web page at <http://www.galileot.com/>.
-
-config IT8172_CIR
- bool
- depends on MIPS_ITE8172 || MIPS_IVR
- default y
-
-config IT8712
- bool
- depends on MIPS_ITE8172
- default y
-
-config BOOT_ELF32
- bool
- depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
- default y
-
-config MIPS_L1_CACHE_SHIFT
- int
- default "4" if MACH_DECSTATION
- default "7" if SGI_IP27
- default "5"
-
-config ARC32
- bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
- default y
-
-config HAVE_STD_PC_SERIAL_PORT
- bool
-
-config ARC_CONSOLE
- bool "ARC console support"
- depends on SGI_IP22 || SNI_RM200_PCI
-
-config ARC_MEMORY
- bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
- default y
-
-config ARC_PROMLIB
- bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
- default y
-
-config ARC64
- bool
- depends on SGI_IP27
- default y
-
-config BOOT_ELF64
- bool
- depends on SGI_IP27
- default y
-
-#config MAPPED_PCI_IO y
-# bool
-# depends on SGI_IP27
-# default y
-
-config QL_ISP_A64
- bool
- depends on SGI_IP27
- default y
-
-config TOSHIBA_BOARDS
- bool
- depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
- default y
-
-endmenu
-
-menu "CPU selection"
-
-choice
- prompt "CPU type"
- default CPU_R4X00
-
-config CPU_MIPS32
- bool "MIPS32"
- select CPU_SUPPORTS_32BIT_KERNEL
-
-config CPU_MIPS64
- bool "MIPS64"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_R3000
- bool "R3000"
- select CPU_SUPPORTS_32BIT_KERNEL
- help
- Please make sure to pick the right CPU type. Linux/MIPS is not
- designed to be generic, i.e. Kernels compiled for R3000 CPUs will
- *not* work on R4000 machines and vice versa. However, since most
- of the supported machines have an R4000 (or similar) CPU, R4x00
- might be a safe bet. If the resulting kernel does not work,
- try to recompile with R3000.
-
-config CPU_TX39XX
- bool "R39XX"
- select CPU_SUPPORTS_32BIT_KERNEL
-
-config CPU_VR41XX
- bool "R41xx"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- The options selects support for the NEC VR41xx series of processors.
- Only choose this option if you have one of these processors as a
- kernel built with this option will not run on any other type of
- processor or vice versa.
-
-config CPU_R4300
- bool "R4300"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R4300-series processors.
-
-config CPU_R4X00
- bool "R4x00"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R4000-series processors other than 4300, including
- the R4000, R4400, R4600, and 4700.
-
-config CPU_TX49XX
- bool "R49XX"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_R5000
- bool "R5000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R5000-series processors other than the Nevada.
-
-config CPU_R5432
- bool "R5432"
-
-config CPU_R6000
- bool "R6000"
- depends on EXPERIMENTAL
- select CPU_SUPPORTS_32BIT_KERNEL
- help
- MIPS Technologies R6000 and R6000A series processors. Note these
- processors are extremly rare and the support for them is incomplete.
-
-config CPU_NEVADA
- bool "RM52xx"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- QED / PMC-Sierra RM52xx-series ("Nevada") processors.
-
-config CPU_R8000
- bool "R8000"
- depends on EXPERIMENTAL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R8000 processors. Note these processors are
- uncommon and the support for them is incomplete.
-
-config CPU_R10000
- bool "R10000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R10000-series processors.
-
-config CPU_RM7000
- bool "RM7000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_RM9000
- bool "RM9000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_SB1
- bool "SB1"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-endchoice
-
choice
prompt "Kernel page size"
default PAGE_SIZE_4KB
@@ -1416,12 +1418,43 @@
SiByte Linux port. Seems to give a small performance benefit.
config CPU_HAS_PREFETCH
- bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
- default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
+ bool
-config VTAG_ICACHE
- bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
- default y if CPU_SB1
+config MIPS_MT
+ bool "Enable MIPS MT"
+
+choice
+ prompt "MIPS MT options"
+ depends on MIPS_MT
+
+config MIPS_MT_SMP
+ bool "Use 1 TC on each available VPE for SMP"
+ select SMP
+
+config MIPS_VPE_LOADER
+ bool "VPE loader support."
+ depends on MIPS_MT
+ help
+ Includes a loader for loading an elf relocatable object
+ onto another VPE and running it.
+
+endchoice
+
+config MIPS_VPE_LOADER_TOM
+ bool "Load VPE program into memory hidden from linux"
+ depends on MIPS_VPE_LOADER
+ default y
+ help
+ The loader can use memory that is present but has been hidden from
+ Linux using the kernel command line option "mem=xxMB". It's up to
+ you to ensure the amount you put in the option and the space your
+ program requires is less or equal to the amount physically present.
+
+# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
+config MIPS_VPE_APSP_API
+ bool "Enable support for AP/SP API (RTLX)"
+ depends on MIPS_VPE_LOADER
+ help
config SB1_PASS_1_WORKAROUNDS
bool
@@ -1440,7 +1473,7 @@
config 64BIT_PHYS_ADDR
bool "Support for 64-bit physical address space"
- depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32_R1 || CPU_MIPS64_R1) && 32BIT
config CPU_ADVANCED
bool "Override CPU Options"
@@ -1463,7 +1496,7 @@
config CPU_HAS_LLDSCD
bool "lld/scd Instructions available" if CPU_ADVANCED
- default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32_R1
help
Say Y here if your CPU has the lld and scd instructions, the 64-bit
equivalents of ll and sc. Say Y here for better performance, N if
@@ -1477,12 +1510,52 @@
machines which require flushing of write buffers in software. Saying
Y is the safe option; N may result in kernel malfunction and crashes.
+menu "MIPSR2 Interrupt handling"
+ depends on CPU_MIPSR2 && CPU_ADVANCED
+
+config CPU_MIPSR2_IRQ_VI
+ bool "Vectored interrupt mode"
+ help
+ Vectored interrupt mode allowing faster dispatching of interrupts.
+ The board support code needs to be written to take advantage of this
+ mode. Compatibility code is included to allow the kernel to run on
+ a CPU that does not support vectored interrupts. It's safe to
+ say Y here.
+
+config CPU_MIPSR2_IRQ_EI
+ bool "External interrupt controller mode"
+ help
+ Extended interrupt mode takes advantage of an external interrupt
+ controller to allow fast dispatching from many possible interrupt
+ sources. Say N unless you know that external interrupt support is
+ required.
+
+config CPU_MIPSR2_SRS
+ bool "Make shadow set registers available for interrupt handlers"
+ depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
+ help
+ Allow the kernel to use shadow register sets for fast interrupts.
+ Interrupt handlers must be specially written to use shadow sets.
+ Say N unless you know that shadow register set upport is needed.
+endmenu
+
config CPU_HAS_SYNC
bool
depends on !CPU_R3000
default y
#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
# caches such as R3000, SB1, R7000 or those that look like they're virtually
@@ -1491,14 +1564,19 @@
# where it's known to be safe. This will not offer highmem on a few systems
# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
# indexed CPUs but we're playing safe.
-# - We should not offer highmem for system of which we already know that they
-# don't have memory configurations that could gain from highmem support in
-# the kernel because they don't support configurations with RAM at physical
-# addresses > 0x20000000.
+# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
+# know they might have memory configurations that could make use of highmem
+# support.
#
config HIGHMEM
bool "High Memory Support"
- depends on 32BIT && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
+ depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM
+
+config CPU_SUPPORTS_HIGHMEM
+ bool
+
+config SYS_SUPPORTS_HIGHMEM
+ bool
config ARCH_FLATMEM_ENABLE
def_bool y
@@ -1508,7 +1586,7 @@
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
+ depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1543,14 +1621,7 @@
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
+source "kernel/Kconfig.preempt"
config RTC_DS1742
bool "DS1742 BRAM/RTC support"
@@ -1566,14 +1637,16 @@
This will result in additional memory usage, so it is not
recommended for normal users.
+endmenu
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
-endmenu
-
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
+config HW_HAS_EISA
+ bool
config HW_HAS_PCI
bool
@@ -1607,7 +1680,7 @@
config EISA
bool "EISA support"
- depends on SGI_IP22 || SNI_RM200_PCI
+ depends on HW_HAS_EISA
select ISA
---help---
The Extended Industry Standard Architecture (EISA) bus was
@@ -1641,12 +1714,6 @@
bool
default y
-config MCA
- bool
-
-config SBUS
- bool
-
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
@@ -1659,7 +1726,6 @@
config TRAD_SIGNALS
bool
- default y if 32BIT
config BUILD_ELF64
bool "Use 64-bit ELF format for building"
@@ -1678,7 +1744,7 @@
config BINFMT_IRIX
bool "Include IRIX binary compatibility"
- depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN
+ depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
config MIPS32_COMPAT
bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
@@ -1718,9 +1784,26 @@
bool
default y if MIPS32_O32 || MIPS32_N32
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS && BROKEN
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
config PM
bool "Power Management support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MACH_AU1X00
+ depends on EXPERIMENTAL && SOC_AU1X00
endmenu
@@ -1730,6 +1813,8 @@
source "fs/Kconfig"
+source "arch/mips/oprofile/Kconfig"
+
source "arch/mips/Kconfig.debug"
source "security/Kconfig"
@@ -1737,18 +1822,3 @@
source "crypto/Kconfig"
source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config ISA_DMA_API
- bool
- default y
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 346e803..0269202 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -52,6 +52,21 @@
CROSS_COMPILE := $(tool-prefix)
endif
+CHECKFLAGS-y += -D__linux__ -D__mips__ \
+ -D_ABIO32=1 \
+ -D_ABIN32=2 \
+ -D_ABI64=3
+CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
+ -D_MIPS_SZLONG=32 \
+ -D__PTRDIFF_TYPE__=int
+CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
+ -D_MIPS_SZLONG=64 \
+ -D__PTRDIFF_TYPE__="long int"
+CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
+CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
+
+CHECKFLAGS = $(CHECKFLAGS-y)
+
ifdef CONFIG_BUILD_ELF64
gas-abi = 64
ld-emul = $(64bit-emul)
@@ -79,9 +94,18 @@
cflags-y += -I $(TOPDIR)/include/asm/gcc
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += $(call cc-option, -finline-limit=100000)
-LDFLAGS_vmlinux += -G 0 -static -n
+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
+#
+# We explicitly add the endianness specifier if needed, this allows
+# to compile kernels with a toolchain for the other endianness. We
+# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
+# when fed the toolchain default!
+#
+cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+
cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
#
@@ -167,14 +191,22 @@
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32) += \
+cflags-$(CONFIG_CPU_MIPS32_R1) += \
$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64) += \
+cflags-$(CONFIG_CPU_MIPS32_R2) += \
+ $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
+ -Wa,--trap
+
+cflags-$(CONFIG_CPU_MIPS64_R1) += \
$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R2) += \
+ $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
+ -Wa,--trap
+
cflags-$(CONFIG_CPU_R5000) += \
$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
-Wa,--trap
@@ -196,6 +228,7 @@
$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+
cflags-$(CONFIG_CPU_SB1) += \
$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
-Wa,--trap
@@ -266,6 +299,13 @@
load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
#
+# AMD Alchemy Pb1200 eval board
+#
+libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00
+load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
+
+#
# AMD Alchemy Db1000 eval board
#
libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/
@@ -294,6 +334,13 @@
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
#
+# AMD Alchemy Db1200 eval board
+#
+libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00
+load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
+
+#
# AMD Alchemy Bosporus eval board
#
libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/
@@ -323,6 +370,7 @@
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
+cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#
@@ -389,6 +437,13 @@
load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
#
+# MIPS SIM
+#
+core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/
+cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim
+load-$(CONFIG_MIPS_SIM) += 0x80100000
+
+#
# Momentum Ocelot board
#
# The Ocelot setup.o must be linked early - it does the ioremap() for the
@@ -514,6 +569,19 @@
load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000
#
+# Common Philips PNX8550
+#
+core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/
+cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550
+
+#
+# Philips PNX8550 JBS board
+#
+libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
+#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
+load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
+
+#
# SGI IP22 (Indy/Indigo2)
#
# Set the load address to >= 0xffffffff88069000 if you want to leave space for
@@ -582,10 +650,20 @@
# removed (as happens, even if they have __initcall/module_init)
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
# Sibyte BCM91120x (Carmel) board
@@ -593,6 +671,7 @@
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
#
libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
@@ -606,6 +685,8 @@
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
+libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
+load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
# SNI RM200 PCI
@@ -629,6 +710,13 @@
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/
load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000
+#
+# Toshiba RBTX4938 board
+#
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+
cflags-y += -Iinclude/asm-mips/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
@@ -701,10 +789,29 @@
all: $(vmlinux-64)
endif
+ifdef CONFIG_MIPS_ATLAS
+all: vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_MALTA
+all: vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_SEAD
+all: vmlinux.srec
+endif
+
+ifdef CONFIG_QEMU
+all: vmlinux.bin
+endif
+
ifdef CONFIG_SNI_RM200_PCI
all: vmlinux.ecoff
endif
+vmlinux.bin: $(vmlinux-32)
+ +@$(call makeboot,$@)
+
vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
+@$(call makeboot,$@)
@@ -720,7 +827,6 @@
@$(MAKE) $(clean)=arch/mips/boot
@$(MAKE) $(clean)=arch/mips/lasat
-
CLEAN_FILES += vmlinux.32 \
vmlinux.64 \
vmlinux.ecoff
diff --git a/arch/mips/arc/Makefile b/arch/mips/arc/Makefile
index e842493..4f349ec 100644
--- a/arch/mips/arc/Makefile
+++ b/arch/mips/arc/Makefile
@@ -3,7 +3,7 @@
#
lib-y += cmdline.o env.o file.o identify.o init.o \
- misc.o time.o tree.o
+ misc.o salone.o time.o tree.o
lib-$(CONFIG_ARC_MEMORY) += memory.o
lib-$(CONFIG_ARC_CONSOLE) += arc_con.o
diff --git a/arch/mips/arc/identify.c b/arch/mips/arc/identify.c
index 0dd7a34..1bd6199 100644
--- a/arch/mips/arc/identify.c
+++ b/arch/mips/arc/identify.c
@@ -44,6 +44,11 @@
MACH_GROUP_SGI,
MACH_SGI_IP28,
PROM_FLAG_ARCS
+ }, { "SGI-IP30",
+ "SGI Octane",
+ MACH_GROUP_SGI,
+ MACH_SGI_IP30,
+ PROM_FLAG_ARCS
}, { "SGI-IP32",
"SGI O2",
MACH_GROUP_SGI,
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 594b75e..a1edfd1 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -8,7 +8,7 @@
obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
- sleeper.o cputable.o dma.o dbdma.o
+ sleeper.o cputable.o dma.o dbdma.o gpio.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 8a0f39f..0b2c03c 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -173,14 +173,14 @@
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@@ -201,14 +201,14 @@
{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index f5521df..4dbde82 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -37,7 +37,8 @@
{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
};
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index adfc317..d00e824 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -29,6 +29,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -38,10 +39,12 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/system.h>
+
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
/*
@@ -61,37 +64,10 @@
*/
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
-static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized;
+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static int dbdma_initialized=0;
static void au1xxx_dbdma_init(void);
-typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
-} dbdev_tab_t;
-
-typedef struct dbdma_chan_config {
- u32 chan_flags;
- u32 chan_index;
- dbdev_tab_t *chan_src;
- dbdev_tab_t *chan_dest;
- au1x_dma_chan_t *chan_ptr;
- au1x_ddma_desc_t *chan_desc_base;
- au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
- void *chan_callparam;
- void (*chan_callback)(int, void *, struct pt_regs *);
-} chan_tab_t;
-
-#define DEV_FLAGS_INUSE (1 << 0)
-#define DEV_FLAGS_ANYUSE (1 << 1)
-#define DEV_FLAGS_OUT (1 << 2)
-#define DEV_FLAGS_IN (1 << 3)
-
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
/* UARTS */
@@ -157,25 +133,25 @@
{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+ { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+ { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
- { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+ { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+ { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
{ DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
+ { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+ { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+ { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+ { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@@ -184,6 +160,24 @@
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ /* Provide 16 user definable device types */
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
};
#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@@ -203,6 +197,36 @@
return NULL;
}
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
+u32
+au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+ u32 ret = 0;
+ dbdev_tab_t *p=NULL;
+ static u16 new_id=0x1000;
+
+ p = find_dbdev_id(0);
+ if ( NULL != p )
+ {
+ memcpy(p, dev, sizeof(dbdev_tab_t));
+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+ ret = p->dev_id;
+ new_id++;
+#if 0
+ printk("add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr );
+#endif
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
/* Allocate a channel and return a non-zero descriptor if successful.
*/
u32
@@ -215,7 +239,7 @@
int i;
dbdev_tab_t *stp, *dtp;
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
/* We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
@@ -225,9 +249,6 @@
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
- return 0;
-
if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
@@ -271,7 +292,6 @@
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
chan_tab_ptr[i] = ctp;
- ctp->chan_index = chan = i;
break;
}
}
@@ -279,10 +299,11 @@
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
+ ctp->chan_index = chan = i;
dcp = DDMA_CHANNEL_BASE;
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
- cp = (volatile au1x_dma_chan_t *)dcp;
+ cp = (au1x_dma_chan_t *)dcp;
ctp->chan_src = stp;
ctp->chan_dest = dtp;
ctp->chan_callback = callback;
@@ -299,6 +320,9 @@
i |= DDMA_CFG_DED;
if (dtp->dev_intpolarity)
i |= DDMA_CFG_DP;
+ if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+ (dtp->dev_flags & DEV_FLAGS_SYNC))
+ i |= DDMA_CFG_SYNC;
cp->ddma_cfg = i;
au_sync();
@@ -309,14 +333,14 @@
rv = (u32)(&chan_tab_ptr[chan]);
}
else {
- /* Release devices.
- */
+ /* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
}
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
/* Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
@@ -344,6 +368,7 @@
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
/* Allocate a descriptor ring, initializing as much as possible.
*/
@@ -370,7 +395,8 @@
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
- desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
+ desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
@@ -381,7 +407,7 @@
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
+ if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@@ -403,7 +429,13 @@
cmd0 |= DSCR_CMD0_SID(srcid);
cmd0 |= DSCR_CMD0_DID(destid);
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
- cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_CURRENT);
+ cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
+
+ /* is it mem to mem transfer? */
+ if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+ ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
+ cmd0 |= DSCR_CMD0_MEM;
+ }
switch (stp->dev_devwidth) {
case 8:
@@ -461,9 +493,14 @@
/* If source input is fifo, set static address.
*/
if (stp->dev_flags & DEV_FLAGS_IN) {
- src0 = stp->dev_physaddr;
+ if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+ else
src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+
}
+ if (stp->dev_physaddr)
+ src0 = stp->dev_physaddr;
/* Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
@@ -487,10 +524,18 @@
/* If destination output is fifo, set static address.
*/
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- dest0 = dtp->dev_physaddr;
+ if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+ if (dtp->dev_physaddr)
+ dest0 = dtp->dev_physaddr;
+#if 0
+ printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+#endif
for (i=0; i<entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
@@ -499,6 +544,8 @@
dp->dscr_dest0 = dest0;
dp->dscr_dest1 = dest1;
dp->dscr_stat = 0;
+ dp->sw_context = 0;
+ dp->sw_status = 0;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
dp++;
}
@@ -511,13 +558,14 @@
return (u32)(ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
/* Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
u32
-au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -544,8 +592,24 @@
*/
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
- ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result
+ * in "stale" data being DMA'd. It has to do with the snoop logic on
+ * the dache eviction buffer. NONCOHERENT_IO is on by default for
+ * these parts. If it is fixedin the future, these dma_cache_inv will
+ * just be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_wback_inv((unsigned long)buf, nbytes);
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@@ -555,13 +619,14 @@
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
u32
-au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -583,11 +648,33 @@
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count */
+
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
+#if 0
+ printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+#endif
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result in
+ * "stale" data being DMA'd. It has to do with the snoop logic on the
+ * dache eviction buffer. NONCOHERENT_IO is on by default for these
+ * parts. If it is fixedin the future, these dma_cache_inv will just
+ * be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_inv((unsigned long)buf,nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@@ -597,6 +684,7 @@
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
/* Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
@@ -646,7 +734,7 @@
au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
int halt_timeout = 0;
ctp = *((chan_tab_t **)chanid);
@@ -666,6 +754,7 @@
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
/* Start using the current descriptor pointer. If the dbdma encounters
* a not valid descriptor, it will stop. In this case, we can just
@@ -675,17 +764,17 @@
au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
ctp = *((chan_tab_t **)chanid);
-
cp = ctp->chan_ptr;
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
au_sync();
- cp->ddma_dbell = 0xffffffff; /* Make it go */
+ cp->ddma_dbell = 0;
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_start);
void
au1xxx_dbdma_reset(u32 chanid)
@@ -704,15 +793,21 @@
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+ /* reset our SW status -- this is used to determine
+ * if a descriptor is in use by upper level SW. Since
+ * posting can reset 'V' bit.
+ */
+ dp->sw_status = 0;
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
u32
au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
u32 rv;
ctp = *((chan_tab_t **)chanid);
@@ -738,8 +833,7 @@
au1xxx_dbdma_stop(chanid);
- if (ctp->chan_desc_base != NULL)
- kfree(ctp->chan_desc_base);
+ kfree((void *)ctp->chan_desc_base);
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -747,15 +841,16 @@
kfree(ctp);
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
static irqreturn_t
dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- u32 intstat;
- u32 chan_index;
+ u32 intstat;
+ u32 chan_index;
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
intstat = dbdma_gptr->ddma_intstat;
au_sync();
@@ -774,19 +869,27 @@
(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-
- return IRQ_HANDLED;
+ return IRQ_RETVAL(1);
}
-static void
-au1xxx_dbdma_init(void)
+static void au1xxx_dbdma_init(void)
{
+ int irq_nr;
+
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
- if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
+#if defined(CONFIG_SOC_AU1550)
+ irq_nr = AU1550_DDMA_INT;
+#elif defined(CONFIG_SOC_AU1200)
+ irq_nr = AU1200_DDMA_INT;
+#else
+ #error Unknown Au1x00 SOC
+#endif
+
+ if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk("Can't get 1550 dbdma irq");
}
@@ -797,7 +900,8 @@
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
dbdev_tab_t *stp, *dtp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
@@ -822,15 +926,64 @@
dp = ctp->chan_desc_base;
do {
- printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
- (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
- printk("dest1 %08x, stat %08x, nxtptr %08x\n",
- dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
+ printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+ printk("stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32
+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+{
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ u32 nbytes=0;
+
+ /* I guess we could check this to be within the
+ * range of the table......
+ */
+ ctp = *((chan_tab_t **)chanid);
+
+ /* We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
+ dp = ctp->put_ptr;
+
+ /* If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
+ return 0;
+
+ /* Load up buffer addresses and byte count.
+ */
+ dp->dscr_dest0 = dscr->dscr_dest0;
+ dp->dscr_source0 = dscr->dscr_source0;
+ dp->dscr_dest1 = dscr->dscr_dest1;
+ dp->dscr_source1 = dscr->dscr_source1;
+ dp->dscr_cmd1 = dscr->dscr_cmd1;
+ nbytes = dscr->dscr_cmd1;
+ /* Allow the caller to specifiy if an interrupt is generated */
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+ dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+ ctp->chan_ptr->ddma_dbell = 0;
+
+ /* Get next descriptor pointer.
+ */
+ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+ /* return something not zero.
+ */
+ return nbytes;
+}
+
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 372c33f..1905c6b 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -39,7 +39,6 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
new file mode 100644
index 0000000..5f5915b
--- /dev/null
+++ b/arch/mips/au1000/common/gpio.c
@@ -0,0 +1,119 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <au1000.h>
+#include <au1xxx_gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+
+int au1xxx_gpio2_read(int signal)
+{
+ signal -= 200;
+/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */
+ return ((gpio2->pinstate >> signal) & 0x01);
+}
+
+void au1xxx_gpio2_write(int signal, int value)
+{
+ signal -= 200;
+
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+ (value << signal);
+}
+
+void au1xxx_gpio2_tristate(int signal)
+{
+ signal -= 200;
+ gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */
+}
+#endif
+
+int au1xxx_gpio1_read(int signal)
+{
+/* gpio1->trioutclr |= (0x01 << signal); */
+ return ((gpio1->pinstaterd >> signal) & 0x01);
+}
+
+void au1xxx_gpio1_write(int signal, int value)
+{
+ if(value)
+ gpio1->outputset = (0x01 << signal);
+ else
+ gpio1->outputclr = (0x01 << signal); /* Output a Zero */
+}
+
+void au1xxx_gpio1_tristate(int signal)
+{
+ gpio1->trioutclr = (0x01 << signal); /* Tristate signal */
+}
+
+
+int au1xxx_gpio_read(int signal)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ return 0;
+#else
+ return au1xxx_gpio2_read(signal);
+#endif
+ else
+ return au1xxx_gpio1_read(signal);
+}
+
+void au1xxx_gpio_write(int signal, int value)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ au1xxx_gpio2_write(signal, value);
+#endif
+ else
+ au1xxx_gpio1_write(signal, value);
+}
+
+void au1xxx_gpio_tristate(int signal)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ au1xxx_gpio2_tristate(signal);
+#endif
+ else
+ au1xxx_gpio1_tristate(signal);
+}
+
+void au1xxx_gpio1_set_inputs(void)
+{
+ gpio1->pininputen = 0;
+}
+
+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+EXPORT_SYMBOL(au1xxx_gpio_tristate);
+EXPORT_SYMBOL(au1xxx_gpio_write);
+EXPORT_SYMBOL(au1xxx_gpio_read);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index d1eb5a4..1339a09 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -83,7 +83,7 @@
void (*board_init_irq)(void);
#ifdef CONFIG_PM
-extern void counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
#endif
static DEFINE_SPINLOCK(irq_lock);
@@ -253,52 +253,72 @@
static struct hw_interrupt_type rise_edge_irq_type = {
- "Au1000 Rise Edge",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_rise_edge_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Rise Edge",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_rise_edge_irq,
+ .end = end_irq,
};
static struct hw_interrupt_type fall_edge_irq_type = {
- "Au1000 Fall Edge",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_fall_edge_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Fall Edge",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_fall_edge_irq,
+ .end = end_irq,
};
static struct hw_interrupt_type either_edge_irq_type = {
- "Au1000 Rise or Fall Edge",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_either_edge_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Rise or Fall Edge",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_either_edge_irq,
+ .end = end_irq,
};
static struct hw_interrupt_type level_irq_type = {
- "Au1000 Level",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_level_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Level",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_level_irq,
+ .end = end_irq,
};
#ifdef CONFIG_PM
-void startup_match20_interrupt(void)
+void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *))
{
+ struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT];
+
+ static struct irqaction action;
+ memset(&action, 0, sizeof(struct irqaction));
+
+ /* This is a big problem.... since we didn't use request_irq
+ * when kernel/irq.c calls probe_irq_xxx this interrupt will
+ * be probed for usage. This will end up disabling the device :(
+ * Give it a bogus "action" pointer -- this will keep it from
+ * getting auto-probed!
+ *
+ * By setting the status to match that of request_irq() we
+ * can avoid it. --cgray
+ */
+ action.dev_id = handler;
+ action.flags = SA_INTERRUPT;
+ cpus_clear(action.mask);
+ action.name = "Au1xxx TOY";
+ action.handler = handler;
+ action.next = NULL;
+
+ desc->action = &action;
+ desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
+
local_enable_irq(AU1000_TOY_MATCH2_INT);
}
#endif
@@ -426,7 +446,6 @@
extern int au1xxx_ic0_nr_irqs;
cp0_status = read_c0_status();
- memset(irq_desc, 0, sizeof(irq_desc));
set_except_vector(0, au1000_IRQ);
/* Initialize interrupt controllers to a safe state.
@@ -492,7 +511,7 @@
intc0_req0 |= au_readl(IC0_REQ0INT);
if (!intc0_req0) return;
-
+#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
@@ -503,7 +522,7 @@
do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
return;
}
-
+#endif
irq = au_ffs(intc0_req0) - 1;
intc0_req0 &= ~(1<<irq);
do_IRQ(irq, regs);
@@ -521,17 +540,7 @@
irq = au_ffs(intc0_req1) - 1;
intc0_req1 &= ~(1<<irq);
-#ifdef CONFIG_PM
- if (irq == AU1000_TOY_MATCH2_INT) {
- mask_and_ack_rise_edge_irq(irq);
- counter0_irq(irq, NULL, regs);
- local_enable_irq(irq);
- }
- else
-#endif
- {
- do_IRQ(irq, regs);
- }
+ do_IRQ(irq, regs);
}
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 0776b2d..1f7b465 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -7,13 +7,15 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
+#include <linux/config.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/resource.h>
-#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx.h>
+/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
.start = USB_OHCI_BASE,
@@ -41,8 +43,252 @@
.resource = au1xxx_usb_ohci_resources,
};
+/*** AU1100 LCD controller ***/
+
+#ifdef CONFIG_FB_AU1100
+static struct resource au1100_lcd_resources[] = {
+ [0] = {
+ .start = LCD_PHYS_ADDR,
+ .end = LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1100_LCD_INT,
+ .end = AU1100_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1100_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1100_lcd_device = {
+ .name = "au1100-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1100_lcd_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1100_lcd_resources),
+ .resource = au1100_lcd_resources,
+};
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+/* EHCI (USB high speed host controller) */
+static struct resource au1xxx_usb_ehci_resources[] = {
+ [0] = {
+ .start = USB_EHCI_BASE,
+ .end = USB_EHCI_BASE + USB_EHCI_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1000_USB_HOST_INT,
+ .end = AU1000_USB_HOST_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_ehci_device = {
+ .name = "au1xxx-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources),
+ .resource = au1xxx_usb_ehci_resources,
+};
+
+/* Au1200 UDC (USB gadget controller) */
+static struct resource au1xxx_usb_gdt_resources[] = {
+ [0] = {
+ .start = USB_UDC_BASE,
+ .end = USB_UDC_BASE + USB_UDC_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_USB_INT,
+ .end = AU1200_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource au1xxx_mmc_resources[] = {
+ [0] = {
+ .start = SD0_PHYS_ADDR,
+ .end = SD0_PHYS_ADDR + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SD1_PHYS_ADDR,
+ .end = SD1_PHYS_ADDR + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_gdt_device = {
+ .name = "au1xxx-udc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &udc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources),
+ .resource = au1xxx_usb_gdt_resources,
+};
+
+/* Au1200 UOC (USB OTG controller) */
+static struct resource au1xxx_usb_otg_resources[] = {
+ [0] = {
+ .start = USB_UOC_BASE,
+ .end = USB_UOC_BASE + USB_UOC_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_USB_INT,
+ .end = AU1200_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 uoc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_otg_device = {
+ .name = "au1xxx-uoc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &uoc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources),
+ .resource = au1xxx_usb_otg_resources,
+};
+
+static struct resource au1200_lcd_resources[] = {
+ [0] = {
+ .start = LCD_PHYS_ADDR,
+ .end = LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_LCD_INT,
+ .end = AU1200_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource au1200_ide0_resources[] = {
+ [0] = {
+ .start = AU1XXX_ATA_PHYS_ADDR,
+ .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1XXX_ATA_INT,
+ .end = AU1XXX_ATA_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1200_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1200_lcd_device = {
+ .name = "au1200-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1200_lcd_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1200_lcd_resources),
+ .resource = au1200_lcd_resources,
+};
+
+
+static u64 ide0_dmamask = ~(u32)0;
+
+static struct platform_device au1200_ide0_device = {
+ .name = "au1200-ide",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ide0_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1200_ide0_resources),
+ .resource = au1200_ide0_resources,
+};
+
+static u64 au1xxx_mmc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_mmc_device = {
+ .name = "au1xxx-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_mmc_resources),
+ .resource = au1xxx_mmc_resources,
+};
+#endif /* #ifdef CONFIG_SOC_AU1200 */
+
+static struct platform_device au1x00_pcmcia_device = {
+ .name = "au1x00-pcmcia",
+ .id = 0,
+};
+
+#ifdef CONFIG_MIPS_DB1200
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = AU1XXX_SMC91111_PHYS_ADDR,
+ .end = AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1XXX_SMC91111_IRQ,
+ .end = AU1XXX_SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#endif
+
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_usb_ohci_device,
+ &au1x00_pcmcia_device,
+#ifdef CONFIG_FB_AU1100
+ &au1100_lcd_device,
+#endif
+#ifdef CONFIG_SOC_AU1200
+#if 0 /* fixme */
+ &au1xxx_usb_ehci_device,
+#endif
+ &au1xxx_usb_gdt_device,
+ &au1xxx_usb_otg_device,
+ &au1200_lcd_device,
+ &au1200_ide0_device,
+ &au1xxx_mmc_device,
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ &smc91x_device,
+#endif
};
int au1xxx_platform_init(void)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index c40dacc..f85093b 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -34,11 +34,13 @@
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
+#include <linux/jiffies.h>
#include <asm/string.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
+#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_PM
@@ -50,7 +52,7 @@
# define DPRINTK(fmt, args...)
#endif
-static void calibrate_delay(void);
+static void au1000_calibrate_delay(void);
extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
@@ -260,7 +262,7 @@
}
static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
+ void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0;
#ifdef SLEEP_TEST_TIMEOUT
@@ -294,10 +296,9 @@
}
static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
+ void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0;
- void au1k_wait(void);
if (!write) {
*len = 0;
@@ -306,7 +307,7 @@
if (retval)
return retval;
suspend_mode = 1;
- au1k_wait();
+
retval = pm_send_all(PM_RESUME, (void *) 0);
}
return retval;
@@ -314,7 +315,7 @@
static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
+ void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
@@ -409,14 +410,14 @@
/* We don't want _any_ interrupts other than
- * match20. Otherwise our calibrate_delay()
+ * match20. Otherwise our au1000_calibrate_delay()
* calculation will be off, potentially a lot.
*/
intc0_mask = save_local_and_disable(0);
intc1_mask = save_local_and_disable(1);
local_enable_irq(AU1000_TOY_MATCH2_INT);
spin_unlock_irqrestore(&pm_lock, flags);
- calibrate_delay();
+ au1000_calibrate_delay();
restore_local_and_enable(0, intc0_mask);
restore_local_and_enable(1, intc1_mask);
return retval;
@@ -456,7 +457,7 @@
better than 1% */
#define LPS_PREC 8
-static void calibrate_delay(void)
+static void au1000_calibrate_delay(void)
{
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index 22e5a85..9c171af 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -75,7 +75,8 @@
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
- *cp = '\0';
+ if (prom_argc > 1)
+ *cp = '\0';
}
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index c2ae462..2705829 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -39,7 +39,6 @@
#define TIMEOUT 0xffffff
#define SLOW_DOWN
-static const char digits[16] = "0123456789abcdef";
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
@@ -54,7 +53,7 @@
#endif
void
-putch(const unsigned char c)
+prom_putchar(const unsigned char c)
{
unsigned char ch;
int i = 0;
@@ -69,77 +68,3 @@
} while (0 == (ch & TX_BUSY));
com1[SER_DATA] = c;
}
-
-void
-puts(unsigned char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = *cp++;
- }
- putch('\r');
- putch('\n');
-}
-
-void
-fputs(const char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
-
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = *cp++;
- }
-}
-
-
-void
-put64(uint64_t ul)
-{
- int cnt;
- unsigned ch;
-
- cnt = 16; /* 16 nibbles in a 64 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
- int cnt;
- unsigned ch;
-
- cnt = 8; /* 8 nibbles in a 32 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char)(u >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index eff89e1..1ef15d5 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -32,6 +32,7 @@
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@@ -57,7 +58,7 @@
extern void au1xxx_timer_setup(struct irqaction *irq);
extern void set_cpuspec(void);
-static int __init au1x00_setup(void)
+void __init plat_setup(void)
{
struct cpu_spec *sp;
char *argptr;
@@ -106,8 +107,6 @@
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
#ifdef CONFIG_MIPS_HYDROGEN3
strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
-#else
- strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
#endif
}
#endif
@@ -153,15 +152,11 @@
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
au_writel(0, SYS_TOYTRIM);
-
- return 0;
}
-early_initcall(au1x00_setup);
-
#if defined(CONFIG_64BIT_PHYS_ADDR)
/* This routine should be valid for all Au1x based boards */
-phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
u32 start, end;
@@ -192,4 +187,5 @@
/* default nop */
return phys_addr;
}
+EXPORT_SYMBOL(__fixup_bigphys_addr);
#endif
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index 57675b4..883d3f3 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -50,7 +50,6 @@
#include <linux/mc146818rtc.h>
#include <linux/timex.h>
-extern void startup_match20_interrupt(void);
extern void do_softirq(void);
extern volatile unsigned long wall_jiffies;
unsigned long missed_heart_beats = 0;
@@ -58,14 +57,17 @@
static unsigned long r4k_offset; /* Amount to increment compare reg each time */
static unsigned long r4k_cur; /* What counter should be at next timer irq */
int no_au1xxx_32khz;
-void (*au1k_wait_ptr)(void);
+extern int allow_au1k_wait; /* default off for CP0 Counter */
/* Cycle counter value at the previous timer interrupt.. */
static unsigned int timerhi = 0, timerlo = 0;
#ifdef CONFIG_PM
-#define MATCH20_INC 328
-extern void startup_match20_interrupt(void);
+#if HZ < 100 || HZ > 1000
+#error "unsupported HZ value! Must be in [100,1000]"
+#endif
+#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
+extern void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *));
static unsigned long last_pc0, last_match20;
#endif
@@ -117,17 +119,16 @@
}
#ifdef CONFIG_PM
-void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long pc0;
int time_elapsed;
static int jiffie_drift = 0;
- kstat.irqs[0][irq]++;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
- printk(KERN_WARNING "counter 0 w status eror\n");
- return;
+ printk(KERN_WARNING "counter 0 w status error\n");
+ return IRQ_NONE;
}
pc0 = au_readl(SYS_TOYREAD);
@@ -164,6 +165,8 @@
update_process_times(user_mode(regs));
#endif
}
+
+ return IRQ_HANDLED;
}
/* When we wakeup from sleep, we have to "catch up" on all of the
@@ -388,7 +391,6 @@
{
unsigned int est_freq;
extern unsigned long (*do_gettimeoffset)(void);
- extern void au1k_wait(void);
printk("calculating r4koff... ");
r4k_offset = cal_r4koff();
@@ -441,18 +443,18 @@
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- /* setup match20 to interrupt once every 10ms */
+ /* setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- startup_match20_interrupt();
+ startup_match20_interrupt(counter0_irq);
do_gettimeoffset = do_fast_pm_gettimeoffset;
/* We can use the real 'wait' instruction.
*/
- au1k_wait_ptr = au1k_wait;
+ allow_au1k_wait = 1;
}
#else
diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c
index 447a9a4..0b21bed 100644
--- a/arch/mips/au1000/common/usbdev.c
+++ b/arch/mips/au1000/common/usbdev.c
@@ -1005,11 +1005,11 @@
#endif
dev->ep0_stage = SETUP_STAGE;
break;
- }
+ }
spin_unlock(&ep0->lock);
- // we're done processing the packet, free it
- kfree(pkt);
+ // we're done processing the packet, free it
+ kfree(pkt);
}
@@ -1072,8 +1072,7 @@
clear_dma_done1(ep0->indma);
pkt = send_packet_complete(ep0);
- if (pkt)
- kfree(pkt);
+ kfree(pkt);
}
/*
@@ -1302,8 +1301,7 @@
endpoint_flush(ep);
}
- if (usbdev.full_conf_desc)
- kfree(usbdev.full_conf_desc);
+ kfree(usbdev.full_conf_desc);
}
int
diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c
index bd99733..a4898b1 100644
--- a/arch/mips/au1000/csb250/init.c
+++ b/arch/mips/au1000/csb250/init.c
@@ -35,7 +35,6 @@
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index 8f6ef0d..f63024a 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -48,6 +48,38 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+};
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
index ade35e4..c29852c 100644
--- a/arch/mips/au1000/db1x00/mirage_ts.c
+++ b/arch/mips/au1000/db1x00/mirage_ts.c
@@ -102,15 +102,15 @@
} mirage_ts_cal =
{
#if 0
- xscale: 84,
- xtrans: -157,
- yscale: 66,
- ytrans: -150,
+ .xscale = 84,
+ .xtrans = -157,
+ .yscale = 66,
+ .ytrans = -150,
#else
- xscale: 84,
- xtrans: -150,
- yscale: 66,
- ytrans: -146,
+ .xscale = 84,
+ .xtrans = -150,
+ .yscale = 66,
+ .ytrans = -146,
#endif
};
diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c
index 8cc9879..01ab284 100644
--- a/arch/mips/au1000/hydrogen3/init.c
+++ b/arch/mips/au1000/hydrogen3/init.c
@@ -37,7 +37,6 @@
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 02e7dbc..88f2b6d 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -33,7 +33,6 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index ddcb9d0..f9a0a8b 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -47,6 +47,17 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 34713c5..e9fa1ba 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -65,5 +65,4 @@
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
- return 0;
}
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
new file mode 100644
index 0000000..22b673c
--- /dev/null
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Alchemy Semiconductor PB1200 board.
+#
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
new file mode 100644
index 0000000..a45b175
--- /dev/null
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Alchemy Pb1200/Db1200 board setup.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_ETH_INT DB1200_ETH_INT
+#define PB1200_IDE_INT DB1200_IDE_INT
+#endif
+
+extern void _board_init_irq(void);
+extern void (*board_init_irq)(void);
+
+void board_reset (void)
+{
+ bcsr->resets = 0;
+ bcsr->system = 0;
+}
+
+void __init board_setup(void)
+{
+ char *argptr = NULL;
+ u32 pin_func;
+
+#if 0
+ /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_sync();
+#endif
+
+#if defined(CONFIG_I2C_AU1550)
+ {
+ u32 freq0, clksrc;
+
+ /* Select SMBUS in CPLD */
+ bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(3<<17 | 1<<4);
+ /* Set GPIOs correctly */
+ pin_func |= 2<<17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The i2c driver depends on 50Mhz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+ /* 396Mhz / (3+1)*2 == 49.5Mhz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~0x01f00000;
+ /* bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= (0x3 << 22);
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1200
+ argptr = prom_getcmdline();
+#ifdef CONFIG_MIPS_PB1200
+ strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#endif
+
+ /* The Pb1200 development board uses external MUX for PSC0 to
+ support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
+#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
+ #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+ Refer to Pb1200/Db1200 documentation.
+#elif defined( CONFIG_AU1XXX_PSC_SPI )
+ bcsr->resets |= BCSR_RESETS_PCS0MUX;
+ /*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
+ bcsr->resets =0x900f;
+#elif defined( CONFIG_I2C_AU1550 )
+ bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+ au_sync();
+
+#ifdef CONFIG_MIPS_PB1200
+ printk("AMD Alchemy Pb1200 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ printk("AMD Alchemy Db1200 Board\n");
+#endif
+
+ /* Setup Pb1200 External Interrupt Controller */
+ {
+ extern void (*board_init_irq)(void);
+ extern void _board_init_irq(void);
+ board_init_irq = _board_init_irq;
+ }
+}
+
+int
+board_au1200fb_panel (void)
+{
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ int p;
+
+ p = bcsr->switches;
+ p >>= 8;
+ p &= 0x0F;
+ return p;
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+ /* Apply power */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+ /*printk("board_au1200fb_panel_init()\n"); */
+ return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+ /* Remove power */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+ /*printk("board_au1200fb_panel_shutdown()\n"); */
+ return 0;
+}
+
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
new file mode 100644
index 0000000..27f09e3
--- /dev/null
+++ b/arch/mips/au1000/pb1200/init.c
@@ -0,0 +1,69 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PB1200 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1200";
+}
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = (int) fw_arg0;
+ prom_argv = (char **) fw_arg1;
+ prom_envp = (char **) fw_arg2;
+
+ mips_machgroup = MACH_GROUP_ALCHEMY;
+ mips_machtype = MACH_PB1200;
+
+ prom_init_cmdline();
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ memsize = 0x08000000;
+ } else {
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
new file mode 100644
index 0000000..59e70e5
--- /dev/null
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -0,0 +1,182 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1xxx irq map table
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
+/*
+ * Support for External interrupts on the PbAu1200 Development platform.
+ */
+static volatile int pb1200_cascade_en=0;
+
+irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned short bisr = bcsr->int_status;
+ int extirq_nr = 0;
+
+ /* Clear all the edge interrupts. This has no effect on level */
+ bcsr->int_status = bisr;
+ for( ; bisr; bisr &= (bisr-1) )
+ {
+ extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+ /* Ack and dispatch IRQ */
+ do_IRQ(extirq_nr,regs);
+ }
+ return IRQ_RETVAL(1);
+}
+
+inline void pb1200_enable_irq(unsigned int irq_nr)
+{
+ bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+inline void pb1200_disable_irq(unsigned int irq_nr)
+{
+ bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+{
+ if (++pb1200_cascade_en == 1)
+ {
+ request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
+#ifdef CONFIG_MIPS_PB1200
+ /* We have a problem with CPLD rev3. Enable a workaround */
+ if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
+ {
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+ printk("updated to latest revision. This software will not\n");
+ printk("work on anything less than CPLD rev4\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ while(1);
+ }
+#endif
+ }
+ pb1200_enable_irq(irq_nr);
+ return 0;
+}
+
+static void pb1200_shutdown_irq( unsigned int irq_nr )
+{
+ pb1200_disable_irq(irq_nr);
+ if (--pb1200_cascade_en == 0)
+ {
+ free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+ }
+ return;
+}
+
+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
+{
+ pb1200_disable_irq( irq_nr );
+}
+
+static void pb1200_end_irq(unsigned int irq_nr)
+{
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+ pb1200_enable_irq(irq_nr);
+ }
+}
+
+static struct hw_interrupt_type external_irq_type =
+{
+#ifdef CONFIG_MIPS_PB1200
+ "Pb1200 Ext",
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ "Db1200 Ext",
+#endif
+ pb1200_startup_irq,
+ pb1200_shutdown_irq,
+ pb1200_enable_irq,
+ pb1200_disable_irq,
+ pb1200_mask_and_ack_irq,
+ pb1200_end_irq,
+ NULL
+};
+
+void _board_init_irq(void)
+{
+ int irq_nr;
+
+ for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
+ {
+ irq_desc[irq_nr].handler = &external_irq_type;
+ pb1200_disable_irq(irq_nr);
+ }
+
+ /* GPIO_7 can not be hooked here, so it is hooked upon first
+ request of any source attached to the cascade */
+}
+
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 476e250..8cb76c2 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -47,6 +47,11 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+};
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index 889d494..47c7a1c 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -47,6 +47,11 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+};
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index efbeac3..0dc8441 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -33,6 +33,9 @@
$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
$(HOSTCC) -o $@ $^
+vmlinux.bin: $(VMLINUX)
+ $(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
+
vmlinux.srec: $(VMLINUX)
$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
@@ -45,5 +48,6 @@
clean-files += addinitrd \
elf2ecoff \
+ vmlinux.bin \
vmlinux.ecoff \
vmlinux.srec
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index a5e6554..3b6b757 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,6 +2,6 @@
# Makefile for the Cobalt micro systems family specific parts of the kernel
#
-obj-y := irq.o int-handler.o reset.o setup.o promcon.o
+obj-y := irq.o int-handler.o reset.o setup.o
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S
index 1a21dec..f92608e 100644
--- a/arch/mips/cobalt/int-handler.S
+++ b/arch/mips/cobalt/int-handler.S
@@ -18,8 +18,8 @@
SAVE_ALL
CLI
- la ra, ret_from_irq
- move a1, sp
+ PTR_LA ra, ret_from_irq
+ move a0, sp
j cobalt_irq
END(cobalt_handle_int)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index 6d2a815..0d90851 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -10,6 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
#include <asm/i8259.h>
#include <asm/irq_cpu.h>
@@ -25,8 +27,8 @@
* the CPU interrupt lines, and ones that come in on the via chip. The CPU
* mappings are:
*
- * 16, - Software interrupt 0 (unused) IE_SW0
- * 17 - Software interrupt 1 (unused) IE_SW0
+ * 16 - Software interrupt 0 (unused) IE_SW0
+ * 17 - Software interrupt 1 (unused) IE_SW1
* 18 - Galileo chip (timer) IE_IRQ0
* 19 - Tulip 0 + NCR SCSI IE_IRQ1
* 20 - Tulip 1 IE_IRQ2
@@ -42,61 +44,94 @@
* 15 - IDE1
*/
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+static inline void galileo_irq(struct pt_regs *regs)
{
- unsigned int pending = read_c0_status() & read_c0_cause();
+ unsigned int mask, pending, devfn;
- if (pending & CAUSEF_IP2) { /* int 18 */
- unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS);
+ mask = GALILEO_INL(GT_INTRMASK_OFS);
+ pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask;
- /* Check for timer irq ... */
- if (irq_src & GALILEO_T0EXP) {
- /* Clear the int line */
- GALILEO_OUTL(0, GT_INTRCAUSE_OFS);
- do_IRQ(COBALT_TIMER_IRQ, regs);
- }
- return;
- }
+ if (pending & GALILEO_INTR_T0EXP) {
- if (pending & CAUSEF_IP6) { /* int 22 */
- int irq = i8259_irq();
+ GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS);
+ do_IRQ(COBALT_GALILEO_IRQ, regs);
- if (irq >= 0)
- do_IRQ(irq, regs);
- return;
- }
+ } else if (pending & GALILEO_INTR_RETRY_CTR) {
- if (pending & CAUSEF_IP3) { /* int 19 */
- do_IRQ(COBALT_ETH0_IRQ, regs);
- return;
- }
+ devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8;
+ GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS);
+ printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n",
+ PCI_SLOT(devfn), PCI_FUNC(devfn));
- if (pending & CAUSEF_IP4) { /* int 20 */
- do_IRQ(COBALT_ETH1_IRQ, regs);
- return;
- }
+ } else {
- if (pending & CAUSEF_IP5) { /* int 21 */
- do_IRQ(COBALT_SERIAL_IRQ, regs);
- return;
- }
-
- if (pending & CAUSEF_IP7) { /* int 23 */
- do_IRQ(COBALT_QUBE_SLOT_IRQ, regs);
- return;
+ GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS);
+ printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending);
}
}
+static inline void via_pic_irq(struct pt_regs *regs)
+{
+ int irq;
+
+ irq = i8259_irq();
+ if (irq >= 0)
+ do_IRQ(irq, regs);
+}
+
+asmlinkage void cobalt_irq(struct pt_regs *regs)
+{
+ unsigned pending;
+
+ pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP2) /* COBALT_GALILEO_IRQ (18) */
+
+ galileo_irq(regs);
+
+ else if (pending & CAUSEF_IP6) /* COBALT_VIA_IRQ (22) */
+
+ via_pic_irq(regs);
+
+ else if (pending & CAUSEF_IP3) /* COBALT_ETH0_IRQ (19) */
+
+ do_IRQ(COBALT_CPU_IRQ + 3, regs);
+
+ else if (pending & CAUSEF_IP4) /* COBALT_ETH1_IRQ (20) */
+
+ do_IRQ(COBALT_CPU_IRQ + 4, regs);
+
+ else if (pending & CAUSEF_IP5) /* COBALT_SERIAL_IRQ (21) */
+
+ do_IRQ(COBALT_CPU_IRQ + 5, regs);
+
+ else if (pending & CAUSEF_IP7) /* IRQ 23 */
+
+ do_IRQ(COBALT_CPU_IRQ + 7, regs);
+}
+
+static struct irqaction irq_via = {
+ no_action, 0, { { 0, } }, "cascade", NULL, NULL
+};
+
void __init arch_init_irq(void)
{
+ /*
+ * Mask all Galileo interrupts. The Galileo
+ * handler is set in cobalt_timer_setup()
+ */
+ GALILEO_OUTL(0, GT_INTRMASK_OFS);
+
set_except_vector(0, cobalt_handle_int);
init_i8259_irqs(); /* 0 ... 15 */
- mips_cpu_irq_init(16); /* 16 ... 23 */
+ mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */
/*
* Mask all cpu interrupts
* (except IE4, we already masked those at VIA level)
*/
change_c0_status(ST0_IM, IE_IRQ4);
+
+ setup_irq(COBALT_VIA_IRQ, &irq_via);
}
diff --git a/arch/mips/cobalt/promcon.c b/arch/mips/cobalt/promcon.c
deleted file mode 100644
index f03df76..0000000
--- a/arch/mips/cobalt/promcon.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * PROM console for Cobalt Raq2
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
- * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
- *
- */
-
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/serial_reg.h>
-
-#include <asm/delay.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static unsigned long port = 0xc800000;
-
-static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr)
-{
- char lsr;
-
- do {
- lsr = inb(ioaddr + UART_LSR);
- } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
- outb(ch, ioaddr + UART_TX);
-}
-
-static __inline__ char ns16550_cons_get_char(unsigned long ioaddr)
-{
- while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0)
- udelay(1);
- return inb(ioaddr + UART_RX);
-}
-
-void ns16550_console_write(struct console *co, const char *s, unsigned count)
-{
- char lsr, ier;
- unsigned i;
-
- ier = inb(port + UART_IER);
- outb(0x00, port + UART_IER);
- for (i=0; i < count; i++, s++) {
-
- if(*s == '\n')
- ns16550_cons_put_char('\r', port);
- ns16550_cons_put_char(*s, port);
- }
-
- do {
- lsr = inb(port + UART_LSR);
- } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-
- outb(ier, port + UART_IER);
-}
-
-char getDebugChar(void)
-{
- return ns16550_cons_get_char(port);
-}
-
-void putDebugChar(char kgdb_char)
-{
- ns16550_cons_put_char(kgdb_char, port);
-}
-
-static struct console ns16550_console = {
- .name = "prom",
- .setup = NULL,
- .write = ns16550_console_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init ns16550_setup_console(void)
-{
- register_console(&ns16550_console);
-
- return 0;
-}
-
-console_initcall(ns16550_setup_console);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 084c8e5..805a0e8 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -16,48 +16,45 @@
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
-
-void cobalt_machine_restart(char *command)
-{
- *(volatile char *)0xbc000000 = 0x0f;
-
- /*
- * Ouch, we're still alive ... This time we take the silver bullet ...
- * ... and find that we leave the hardware in a state in which the
- * kernel in the flush locks up somewhen during of after the PCI
- * detection stuff.
- */
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__(
- "jr\t%0"
- :
- : "r" (0xbfc00000));
-}
-
-extern int led_state;
-#define kLED 0xBC000000
-#define LEDSet(x) (*(volatile unsigned char *) kLED) = (( unsigned char)x)
+#include <asm/cobalt/cobalt.h>
void cobalt_machine_halt(void)
{
- int mark;
+ int state, last, diff;
+ unsigned long mark;
- /* Blink our cute? little LED (number 3)... */
- while (1) {
- led_state = led_state | ( 1 << 3 );
- LEDSet(led_state);
- mark = jiffies;
- while (jiffies<(mark+HZ));
- led_state = led_state & ~( 1 << 3 );
- LEDSet(led_state);
- mark = jiffies;
- while (jiffies<(mark+HZ));
+ /*
+ * turn off bar on Qube, flash power off LED on RaQ (0.5Hz)
+ *
+ * restart if ENTER and SELECT are pressed
+ */
+
+ last = COBALT_KEY_PORT;
+
+ for (state = 0;;) {
+
+ state ^= COBALT_LED_POWER_OFF;
+ COBALT_LED_PORT = state;
+
+ diff = COBALT_KEY_PORT ^ last;
+ last ^= diff;
+
+ if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)))
+ COBALT_LED_PORT = COBALT_LED_RESET;
+
+ for (mark = jiffies; jiffies - mark < HZ;)
+ ;
}
}
+void cobalt_machine_restart(char *command)
+{
+ COBALT_LED_PORT = COBALT_LED_RESET;
+
+ /* we should never get here */
+ cobalt_machine_halt();
+}
+
/*
* This triggers the luser mode device driver for the power switch ;-)
*/
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 6b4737e..d358a11 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -13,6 +13,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
@@ -21,6 +23,7 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
+#include <asm/serial.h>
#include <asm/cobalt/cobalt.h>
@@ -30,45 +33,44 @@
int cobalt_board_id;
-static char my_cmdline[CL_SIZE] = {
- "console=ttyS0,115200 "
-#ifdef CONFIG_IP_PNP
- "ip=on "
-#endif
-#ifdef CONFIG_ROOT_NFS
- "root=/dev/nfs "
-#else
- "root=/dev/hda1 "
-#endif
- };
-
const char *get_system_type(void)
{
+ switch (cobalt_board_id) {
+ case COBALT_BRD_ID_QUBE1:
+ return "Cobalt Qube";
+ case COBALT_BRD_ID_RAQ1:
+ return "Cobalt RaQ";
+ case COBALT_BRD_ID_QUBE2:
+ return "Cobalt Qube2";
+ case COBALT_BRD_ID_RAQ2:
+ return "Cobalt RaQ2";
+ }
return "MIPS Cobalt";
}
static void __init cobalt_timer_setup(struct irqaction *irq)
{
- /* Load timer value for 150 Hz */
- GALILEO_OUTL(500000, GT_TC0_OFS);
+ /* Load timer value for 1KHz (TCLK is 50MHz) */
+ GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
- /* Register our timer interrupt */
- setup_irq(COBALT_TIMER_IRQ, irq);
+ /* Enable timer */
+ GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS);
- /* Enable timer ints */
- GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
- /* Unmask timer int */
- GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
+ /* Register interrupt */
+ setup_irq(COBALT_GALILEO_IRQ, irq);
+
+ /* Enable interrupt */
+ GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
}
extern struct pci_ops gt64111_pci_ops;
static struct resource cobalt_mem_resource = {
- "GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
+ "PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM
};
static struct resource cobalt_io_resource = {
- "GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
+ "PCI I/O", 0x1000, 0xffff, IORESOURCE_IO
};
static struct resource cobalt_io_resources[] = {
@@ -86,11 +88,12 @@
.mem_resource = &cobalt_mem_resource,
.mem_offset = 0,
.io_resource = &cobalt_io_resource,
- .io_offset = 0x00001000UL - GT64111_IO_BASE
+ .io_offset = 0 - GT64111_IO_BASE
};
-static void __init cobalt_setup(void)
+void __init plat_setup(void)
{
+ static struct uart_port uart;
unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
int i;
@@ -100,7 +103,10 @@
board_timer_setup = cobalt_timer_setup;
- set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
+ set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
+
+ /* I/O port resource must include UART and LCD/buttons */
+ ioport_resource.end = 0x0fffffff;
/*
* This is a prom style console. We just poke at the
@@ -120,27 +126,61 @@
cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
+ printk("Cobalt board ID: %d\n", cobalt_board_id);
+
#ifdef CONFIG_PCI
register_pci_controller(&cobalt_pci_controller);
#endif
-}
-early_initcall(cobalt_setup);
+#ifdef CONFIG_SERIAL_8250
+ if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+
+ uart.line = 0;
+ uart.type = PORT_UNKNOWN;
+ uart.uartclk = 18432000;
+ uart.irq = COBALT_SERIAL_IRQ;
+ uart.flags = STD_COM_FLAGS;
+ uart.iobase = 0xc800000;
+ uart.iotype = UPIO_PORT;
+
+ early_serial_setup(&uart);
+ }
+#endif
+}
/*
* Prom init. We read our one and only communication with the firmware.
- * Grab the amount of installed memory
+ * Grab the amount of installed memory.
+ * Better boot loaders (CoLo) pass a command line too :-)
*/
void __init prom_init(void)
{
- int argc = fw_arg0;
-
- strcpy(arcs_cmdline, my_cmdline);
+ int narg, indx, posn, nchr;
+ unsigned long memsz;
+ char **argv;
mips_machgroup = MACH_GROUP_COBALT;
- add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
+ memsz = fw_arg0 & 0x7fff0000;
+ narg = fw_arg0 & 0x0000ffff;
+
+ if (narg) {
+ arcs_cmdline[0] = '\0';
+ argv = (char **) fw_arg1;
+ posn = 0;
+ for (indx = 1; indx < narg; ++indx) {
+ nchr = strlen(argv[indx]);
+ if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
+ break;
+ if (posn)
+ arcs_cmdline[posn++] = ' ';
+ strcpy(arcs_cmdline + posn, argv[indx]);
+ posn += nchr;
+ }
+ }
+
+ add_memory_region(0x0, memsz, BOOT_MEM_RAM);
}
unsigned long __init prom_free_prom_memory(void)
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 3120a02..132ec3d 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:13 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,42 +59,72 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
CONFIG_MIPS_ATLAS=y
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
@@ -101,8 +134,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -118,15 +153,46 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -135,7 +201,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -144,10 +209,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -160,6 +221,305 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -171,6 +531,11 @@
CONFIG_FW_LOADER=y
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -187,7 +552,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -201,7 +565,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -247,6 +610,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -259,6 +623,7 @@
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -273,6 +638,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -288,12 +654,8 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -303,7 +665,6 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -312,6 +673,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -335,11 +698,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -352,284 +719,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -637,6 +733,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -681,13 +792,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -700,6 +815,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -712,6 +829,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -741,19 +860,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -766,6 +872,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -786,6 +903,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -812,6 +930,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -822,10 +945,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -845,7 +978,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -855,13 +987,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -879,10 +1007,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -903,12 +1036,14 @@
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -916,6 +1051,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -943,12 +1079,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -974,16 +1108,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -992,6 +1129,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1051,7 +1189,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -1073,6 +1213,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -1097,9 +1238,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
new file mode 100644
index 0000000..25e8a08
--- /dev/null
+++ b/arch/mips/configs/bigsur_defconfig
@@ -0,0 +1,881 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:17 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+CONFIG_SIBYTE_BIGSUR=y
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SIBYTE_BCM1x80=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_CPU_SB1_PASS_1 is not set
+# CONFIG_CPU_SB1_PASS_2_1250 is not set
+# CONFIG_CPU_SB1_PASS_2_2 is not set
+# CONFIG_CPU_SB1_PASS_4 is not set
+# CONFIG_CPU_SB1_PASS_2_112x is not set
+# CONFIG_CPU_SB1_PASS_3 is not set
+# CONFIG_SIMULATION is not set
+# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_CONFIG_SB1_CERR_STALL is not set
+CONFIG_SIBYTE_CFE=y
+# CONFIG_SIBYTE_CFE_CONSOLE is not set
+# CONFIG_SIBYTE_BUS_WATCHER is not set
+# CONFIG_SIBYTE_SB1250_PROF is not set
+# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_SIBYTE_DMA_PAGEOPS is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_DEBUG=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDE_SWARM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SIBYTE_SB1250_DUART=y
+CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGO_SIBYTE=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+CONFIG_SENSORS_DS1374=y
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=y
+CONFIG_SENSORS_PCA9539=y
+CONFIG_SENSORS_PCF8591=y
+CONFIG_SENSORS_RTC8564=y
+CONFIG_SENSORS_MAX6875=y
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_SB1XXX_CORELIS is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_TEA=m
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 158e716..bfbaa08 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:20 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,57 +59,86 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-CONFIG_ZAO_CAPCELLA=y
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+CONFIG_ZAO_CAPCELLA=y
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -122,12 +154,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -136,7 +192,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -145,10 +200,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -161,6 +212,81 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -169,7 +295,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -188,7 +319,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -199,11 +329,8 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -244,6 +371,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -254,6 +382,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -266,79 +395,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -346,10 +409,25 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
@@ -359,7 +437,30 @@
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
#
# Ethernet (1000 Mbit)
@@ -371,12 +472,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -389,6 +495,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -400,6 +508,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -419,29 +529,13 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -451,6 +545,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -461,16 +561,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -483,19 +583,7 @@
#
# Watchdog Cards
#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
@@ -506,9 +594,15 @@
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -519,10 +613,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -542,7 +646,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -552,13 +655,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -576,21 +675,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -611,12 +718,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -648,6 +753,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -656,6 +762,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -676,9 +783,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
#
# Security options
@@ -690,7 +799,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -700,7 +833,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 4302c6f..4b4d1dd 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:23 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,41 +53,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_GT64111=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +123,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -109,14 +142,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -125,7 +182,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -134,10 +190,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -150,6 +202,77 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -161,6 +284,11 @@
CONFIG_FW_LOADER=y
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -177,7 +305,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -189,7 +316,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -234,6 +360,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -244,6 +371,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -256,75 +384,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -332,6 +398,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -357,12 +438,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -375,6 +460,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -386,6 +473,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -415,19 +504,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +513,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -457,6 +544,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -483,6 +571,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -493,10 +586,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -516,7 +619,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -526,13 +628,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -550,12 +648,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -565,10 +668,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -589,12 +694,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -622,7 +725,7 @@
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +734,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -651,7 +755,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -665,7 +771,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -675,7 +805,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 962fc14..6501144 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:26 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,79 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_DB1000=y
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-CONFIG_SOC_AU1000=y
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1000=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +147,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -152,6 +195,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
@@ -169,6 +214,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -179,12 +318,86 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -198,14 +411,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -228,6 +439,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -238,6 +450,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -248,94 +461,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -389,6 +536,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -418,18 +567,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -439,6 +576,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -473,14 +620,14 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -489,6 +636,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -499,10 +650,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -522,7 +683,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -532,12 +692,9 @@
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -552,7 +709,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -561,6 +721,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -579,10 +740,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -603,13 +766,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -621,6 +781,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -641,6 +803,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -650,6 +813,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -709,7 +873,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -725,26 +891,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -756,9 +923,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 6a528d4..b8cd2cd 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:29 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,79 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+CONFIG_MIPS_DB1100=y
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +147,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -147,15 +190,7 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
-# CONFIG_PCMCIA_AU1X00 is not set
+# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
@@ -167,6 +202,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -180,9 +309,83 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -196,14 +399,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -226,6 +427,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -236,6 +438,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -246,101 +449,35 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_MIPS_AU1X00_ENET=y
#
# Ethernet (1000 Mbit)
@@ -360,19 +497,6 @@
# CONFIG_NET_RADIO is not set
#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
# Wan interfaces
#
# CONFIG_WAN is not set
@@ -387,6 +511,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -416,18 +542,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +551,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=m
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -454,7 +578,10 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_AU1X00=y
+CONFIG_SERIAL_AU1X00_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -468,20 +595,19 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
#
-# PCMCIA character devices
+# TPM devices
#
-CONFIG_SYNCLINK_CS=m
-# CONFIG_RAW_DRIVER is not set
#
# I2C support
@@ -494,10 +620,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -510,13 +646,43 @@
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_AU1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -527,12 +693,9 @@
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -547,7 +710,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -556,6 +722,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -574,10 +741,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -598,13 +767,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -616,6 +782,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -636,6 +804,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -645,6 +814,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -704,7 +874,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -720,26 +892,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -751,9 +924,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
new file mode 100644
index 0000000..530b6c2
--- /dev/null
+++ b/arch/mips/configs/db1200_defconfig
@@ -0,0 +1,987 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:32 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_AU1X00=m
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+# CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON is not set
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_MIPS_AU1X00_ENET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_AU1X00_GPIO is not set
+# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AU1X00=y
+CONFIG_SERIAL_AU1X00_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AU1X=y
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+CONFIG_JFS_FS=y
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="mem=48M"
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index fed6f2f..1c2784d 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:36 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,81 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+CONFIG_MIPS_DB1500=y
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +149,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +190,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +198,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -176,6 +222,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -186,15 +326,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -232,16 +377,14 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1X00=y
-CONFIG_MTD_DB1X00_BOOT=y
-CONFIG_MTD_DB1X00_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -277,7 +420,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -290,7 +432,6 @@
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -336,6 +477,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -346,6 +488,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -358,94 +501,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -453,6 +515,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -479,12 +556,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -497,6 +578,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -520,6 +603,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -549,19 +634,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -571,6 +643,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -590,6 +673,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -603,7 +687,8 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -620,6 +705,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -630,10 +720,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -647,7 +747,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -680,7 +779,6 @@
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
@@ -689,6 +787,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -699,23 +799,23 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -733,12 +833,17 @@
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -762,6 +867,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -786,9 +892,10 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_LD=m
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -807,12 +914,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -831,10 +943,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -855,13 +969,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -895,6 +1006,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -904,6 +1016,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -963,7 +1076,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -979,26 +1094,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -1010,9 +1126,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 178c0ad..64248e2 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:39 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,80 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+CONFIG_MIPS_DB1550=y
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -176,6 +221,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -186,15 +325,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -238,9 +382,8 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1550=y
-CONFIG_MTD_DB1550_BOOT=y
-CONFIG_MTD_DB1550_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -281,7 +424,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -293,7 +435,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -350,6 +491,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -367,6 +509,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -377,6 +520,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -389,94 +533,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -484,6 +547,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -510,12 +588,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -528,6 +610,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -559,6 +643,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -588,19 +674,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -610,6 +683,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -629,6 +713,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -660,6 +745,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -670,10 +760,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -687,7 +787,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -697,13 +796,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -721,12 +816,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -745,10 +845,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -769,13 +871,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -809,6 +908,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -818,6 +918,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -877,7 +978,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -893,26 +996,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -924,9 +1028,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig
index 70addc7..b260e51 100644
--- a/arch/mips/configs/ddb5476_defconfig
+++ b/arch/mips/configs/ddb5476_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:42 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,41 +53,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
CONFIG_DDB5476=y
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DDB5XXX_COMMON=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +124,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -110,14 +143,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -126,7 +183,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_MMU=y
@@ -136,11 +192,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -153,6 +204,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -161,7 +286,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -181,8 +311,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -193,7 +321,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -239,6 +366,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -254,6 +382,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -266,78 +395,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -345,6 +409,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -352,7 +431,6 @@
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -377,12 +455,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -395,6 +477,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -406,6 +490,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -435,19 +521,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -457,6 +530,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -477,6 +561,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -503,6 +588,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -513,10 +603,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -530,6 +630,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -537,6 +642,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -549,8 +655,11 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -575,13 +684,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -599,21 +704,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -634,12 +747,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -668,7 +779,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -677,6 +788,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -697,7 +809,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="ip=any"
@@ -711,7 +825,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -721,7 +859,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index 6029280..c2a01df 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:45 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,42 +53,70 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
CONFIG_DDB5477=y
-CONFIG_DDB5477_BUS_FREQUENCY=0
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_DDB5477_BUS_FREQUENCY=0
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DDB5XXX_COMMON=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +124,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -110,14 +143,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -126,7 +183,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -135,10 +191,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -151,6 +203,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -159,7 +285,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -178,7 +309,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -189,7 +319,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -212,6 +341,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -222,6 +352,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -234,78 +365,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -313,6 +379,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -357,13 +438,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -376,6 +461,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -387,6 +474,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -416,19 +505,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -438,6 +514,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -458,6 +545,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -484,6 +572,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -494,10 +587,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -517,7 +620,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -527,13 +629,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -551,21 +649,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -586,12 +692,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -623,6 +727,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +736,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -651,7 +757,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="ip=any"
@@ -665,7 +773,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -675,7 +807,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 66ec1f4..5bc885b 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:48 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,48 +53,76 @@
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=4
@@ -98,8 +130,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_R3000=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -115,12 +149,37 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R3000=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_WB=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -135,10 +194,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -150,6 +205,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -159,6 +288,12 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -177,17 +312,14 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -196,7 +328,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -206,6 +338,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -213,10 +346,12 @@
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -228,9 +363,10 @@
#
# SCSI Transport Attributes
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -248,6 +384,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -258,78 +395,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -363,6 +450,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -377,48 +466,22 @@
#
# Input device support
#
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_SERIAL_DEC=y
+CONFIG_SERIAL_DEC_CONSOLE=y
+CONFIG_ZS=y
#
# Serial drivers
@@ -445,18 +508,20 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -467,10 +532,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -483,13 +558,29 @@
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_PMAG_AA is not set
+CONFIG_FB_PMAG_BA=y
+CONFIG_FB_PMAGB_B=y
+# CONFIG_FB_MAXINE is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
-# Console display driver support
+# Logo configuration
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DEC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -504,10 +595,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -520,7 +607,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -529,6 +619,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -538,10 +629,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -562,12 +655,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -584,19 +675,31 @@
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=y
+CONFIG_UFS_FS_WRITE=y
#
# Network File Systems
#
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -631,9 +734,24 @@
#
# Kernel hacking
#
-# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
#
# Security options
@@ -645,7 +763,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -655,7 +797,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index ba2ec01..c0d06ea 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:51 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,56 +59,84 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_CASIO_E55=y
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_VRC4171 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_CASIO_E55=y
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -121,12 +152,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -141,11 +196,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
@@ -157,6 +207,78 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -168,6 +290,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -185,18 +312,13 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -205,7 +327,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -237,6 +359,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -252,6 +375,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -262,76 +386,13 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -339,12 +400,26 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
@@ -380,6 +455,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -401,26 +478,14 @@
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +495,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -440,16 +515,15 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -484,10 +558,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -498,10 +576,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -522,7 +610,6 @@
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -536,10 +623,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -552,24 +635,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -590,12 +680,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -617,16 +705,17 @@
#
# Network File Systems
#
-CONFIG_NFS_FS=y
+CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
+CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -634,6 +723,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -654,9 +744,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M"
#
# Security options
@@ -668,7 +760,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -678,7 +794,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index 17e87f7..f1309d8 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:54 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,41 +59,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
CONFIG_MIPS_EV64120=y
-# CONFIG_EVB_PCI1 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_EVB_PCI1 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_MIPS_GT64120=y
# CONFIG_SYSCLK_75 is not set
# CONFIG_SYSCLK_83 is not set
@@ -100,8 +131,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -117,15 +150,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -134,7 +191,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -143,10 +199,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +211,79 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -167,7 +292,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -186,7 +316,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -197,7 +326,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -220,6 +348,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -230,6 +359,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -242,77 +372,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -320,6 +386,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -345,12 +426,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -363,6 +448,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -381,6 +468,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -410,19 +499,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -432,6 +508,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -452,6 +539,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -478,6 +566,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -488,10 +581,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -511,7 +614,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -521,13 +623,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -545,21 +643,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -580,12 +686,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -614,7 +718,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -623,6 +727,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -643,7 +748,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
@@ -657,7 +764,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -667,7 +798,8 @@
# Library routines
#
CONFIG_CRC_CCITT=y
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
index 9da4140..8ac55b7 100644
--- a/arch/mips/configs/ev96100_defconfig
+++ b/arch/mips/configs/ev96100_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:57 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,40 +59,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_EV96100=y
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
@@ -99,8 +130,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -116,6 +149,18 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -123,11 +168,25 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -143,10 +202,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -158,6 +213,79 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -169,6 +297,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -185,13 +318,11 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -214,6 +345,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -224,6 +356,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -234,77 +367,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -338,6 +422,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -367,18 +453,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -388,6 +462,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -429,10 +513,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -443,10 +530,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -466,7 +563,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -480,10 +576,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -496,24 +588,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -534,12 +633,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -568,7 +665,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -577,6 +674,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -597,7 +695,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -611,7 +711,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -621,7 +745,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 17fa5c4..3ae3838 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:01 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,41 +60,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_ARC32=y
@@ -103,8 +134,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -120,22 +153,48 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+CONFIG_HW_HAS_EISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
@@ -145,10 +204,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -160,115 +215,7 @@
CONFIG_TRAD_SIGNALS=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -277,12 +224,14 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +245,10 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -341,6 +292,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
@@ -348,11 +302,15 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,9 +334,12 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -395,12 +356,14 @@
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -410,7 +373,7 @@
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +392,16 @@
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -456,10 +424,6 @@
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
@@ -479,6 +443,7 @@
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
@@ -489,6 +454,7 @@
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
@@ -496,17 +462,153 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -540,6 +642,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -569,18 +673,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +690,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -644,11 +746,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -659,10 +764,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -693,7 +808,6 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -707,10 +821,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -723,13 +833,17 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +855,14 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
@@ -754,6 +870,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -781,12 +898,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -811,15 +926,20 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +955,7 @@
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -908,7 +1029,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -931,6 +1054,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1066,10 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -955,9 +1079,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index b2a67da..d962f61 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:04 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,25 +11,31 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +45,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,55 +62,85 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SGI_SN0_N_MODE is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_NUMA=y
# CONFIG_MAPPED_KERNEL is not set
# CONFIG_REPLICATE_KTEXT is not set
# CONFIG_REPLICATE_EXHANDLERS is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_IP27=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC64=y
CONFIG_BOOT_ELF64=y
-CONFIG_QL_ISP_A64=y
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -121,17 +156,42 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R10000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=64
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
# CONFIG_MIPS_INSANE_LARGE is not set
#
@@ -141,7 +201,6 @@
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -150,10 +209,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -163,7 +218,7 @@
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
+CONFIG_BUILD_ELF64=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -171,6 +226,111 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -179,7 +339,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -198,7 +363,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -210,7 +374,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -232,6 +395,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -241,8 +405,10 @@
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -256,7 +422,8 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -271,26 +438,24 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_ISP=y
# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLOGIC_1280_1040=y
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -313,11 +478,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -330,107 +499,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -438,13 +513,25 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_SGI_IOC3_ETH=y
-CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
-CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
@@ -466,12 +553,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -484,6 +575,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -496,6 +589,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -513,25 +608,15 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -549,7 +634,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -557,6 +641,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -584,6 +669,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -594,10 +684,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -611,7 +711,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -621,13 +720,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -645,12 +740,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,17 +762,19 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -693,12 +795,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -722,13 +822,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -738,6 +839,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -772,7 +874,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -788,28 +892,29 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -819,9 +924,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index b26e117..bf8fb95 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:07 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -25,13 +25,16 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,42 +54,71 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_IP32=y
-CONFIG_OWN_DMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_OWN_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -95,8 +128,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -112,6 +147,17 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -119,9 +165,22 @@
CONFIG_BOARD_SCACHE=y
CONFIG_R5000_CPU_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
@@ -130,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -139,10 +197,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -160,6 +214,80 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -168,7 +296,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -187,7 +320,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -199,7 +331,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -221,6 +352,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -233,6 +365,7 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -244,9 +377,10 @@
#
# SCSI Transport Attributes
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
#
# SCSI low-level drivers
@@ -266,18 +400,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -286,6 +415,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -299,6 +430,8 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -311,78 +444,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -390,6 +458,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -416,12 +499,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -434,6 +521,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -446,6 +535,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -475,20 +566,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -498,6 +575,18 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_MACEPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -518,6 +607,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -544,6 +634,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -554,10 +649,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -577,7 +682,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -587,13 +691,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -611,21 +711,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -646,13 +754,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -676,13 +781,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +797,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -721,7 +828,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -735,7 +844,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -745,7 +878,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index 08bd3ad..0940771 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:09 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -26,13 +25,16 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,41 +60,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
CONFIG_MIPS_ITE8172=y
-# CONFIG_IT8172_REVC is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_IT8172_REVC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ITE_BOARD_GEN=y
CONFIG_IT8172_CIR=y
CONFIG_IT8712=y
@@ -100,8 +131,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -117,14 +150,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -140,10 +198,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -155,6 +209,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -166,12 +294,17 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
@@ -207,7 +340,6 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
@@ -217,6 +349,7 @@
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -251,14 +384,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -302,6 +433,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -312,6 +444,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -322,78 +455,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -426,6 +509,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -455,18 +540,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -476,6 +549,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -521,10 +604,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -535,10 +621,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -558,7 +654,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -574,15 +669,9 @@
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
CONFIG_SOUND_IT8172=y
-# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_AD1980 is not set
#
@@ -592,10 +681,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -608,24 +693,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -646,12 +738,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -682,7 +772,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +781,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -711,7 +802,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -725,7 +818,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -735,7 +852,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index 583ef5c..9ba61dfc 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:12 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -26,13 +25,16 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,40 +60,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
CONFIG_MIPS_IVR=y
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ITE_BOARD_GEN=y
CONFIG_IT8172_CIR=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -98,8 +129,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -115,14 +148,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -131,7 +188,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -140,10 +196,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +208,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -164,7 +290,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -183,7 +314,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -194,7 +324,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -239,6 +368,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -249,6 +379,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -261,78 +392,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -340,6 +406,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -365,12 +446,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -383,6 +468,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -394,6 +481,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -423,19 +512,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -445,6 +521,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -467,6 +554,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -492,6 +580,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -502,10 +595,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -525,7 +628,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -535,13 +637,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -559,21 +657,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -594,12 +700,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -628,7 +732,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -637,6 +741,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -657,7 +762,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -671,7 +778,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -681,7 +812,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 8abb5a0..21b2b80 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:14 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -54,36 +57,70 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
CONFIG_MOMENCO_JAGUAR_ATX=y
-CONFIG_JAGUAR_DMALOW=y
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_JAGUAR_DMALOW=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_LIMITED_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_MV64340=y
@@ -95,8 +132,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -112,6 +151,17 @@
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -119,13 +169,24 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -134,7 +195,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -143,10 +203,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -158,6 +214,68 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -166,7 +284,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -185,7 +308,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -195,7 +317,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -218,6 +339,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -228,6 +350,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -240,58 +363,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -304,6 +377,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -343,9 +431,11 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
CONFIG_MV643XX_ETH_0=y
CONFIG_MV643XX_ETH_1=y
@@ -354,6 +444,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -366,6 +457,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -374,6 +467,8 @@
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -391,20 +486,10 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -425,6 +510,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -451,6 +537,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -461,10 +551,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -478,7 +578,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -488,13 +587,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -512,6 +607,10 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -519,13 +618,16 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -546,10 +648,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -570,7 +672,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -591,7 +693,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -605,7 +709,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -615,7 +743,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index da5d9ee..9a728c2 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:17 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,40 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_TOSHIBA_JMR3927=y
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+CONFIG_TOSHIBA_JMR3927=y
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_MIPS_TX3927=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +123,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
CONFIG_CPU_TX39XX=y
# CONFIG_CPU_VR41XX is not set
@@ -109,12 +142,34 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX39XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RTC_DS1742=y
@@ -124,7 +179,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -133,10 +187,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -149,6 +199,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -157,7 +281,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -176,7 +305,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -187,7 +315,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -210,6 +337,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -220,6 +348,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -232,78 +361,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -311,6 +375,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -336,12 +415,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -354,6 +437,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -365,6 +450,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -394,19 +481,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -416,6 +490,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -426,11 +511,9 @@
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
@@ -438,10 +521,6 @@
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
-# CONFIG_SERIAL_TX3912 is not set
-CONFIG_TXX927_SERIAL=y
-CONFIG_TXX927_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_TXX9 is not set
#
# Serial drivers
@@ -451,6 +530,8 @@
#
# Non-8250 serial port support
#
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -477,6 +558,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -487,10 +573,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -504,6 +600,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -511,6 +612,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -523,8 +625,11 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -548,13 +653,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -572,6 +673,10 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -579,13 +684,16 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -606,10 +714,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -638,7 +746,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -647,6 +755,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -667,7 +776,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -681,7 +792,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -691,7 +826,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 8d600ae..03cd0ca 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:19 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,53 +59,83 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
CONFIG_LASAT=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_PICVUE=y
CONFIG_PICVUE_PROC=y
CONFIG_DS1603=y
CONFIG_LASAT_SYSCTL=y
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_NILE4=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_MIPS_GT64120=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -118,17 +151,41 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_R5000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -137,7 +194,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
CONFIG_MMU=y
#
@@ -146,10 +202,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +214,76 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -170,15 +292,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -223,6 +350,7 @@
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_LASAT=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -258,7 +386,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -269,7 +396,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -326,6 +452,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -343,6 +470,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -353,6 +481,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -365,68 +494,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -439,6 +508,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -464,12 +548,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -482,6 +570,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -493,6 +583,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -522,19 +614,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -544,6 +623,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -564,6 +654,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -590,6 +681,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -600,10 +696,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -623,7 +729,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -633,13 +738,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -657,10 +758,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -670,13 +776,16 @@
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -697,12 +806,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -728,12 +835,13 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -742,6 +850,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -762,7 +871,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -776,7 +887,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -786,7 +921,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 79519ac..2acdec9 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:53:14 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:22 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,44 +59,75 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
CONFIG_MIPS_MALTA=y
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
@@ -104,8 +138,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -121,14 +157,48 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -137,7 +207,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -146,10 +215,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +227,305 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -173,6 +537,11 @@
CONFIG_FW_LOADER=y
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -203,7 +572,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -261,6 +629,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -278,6 +647,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
@@ -290,6 +660,7 @@
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -304,6 +675,7 @@
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -324,18 +696,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
@@ -344,6 +711,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -367,11 +736,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -384,284 +757,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -669,6 +771,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -713,13 +830,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -732,6 +853,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -744,6 +867,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -773,19 +898,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -795,6 +907,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -815,6 +938,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -840,6 +964,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -850,10 +979,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -873,7 +1012,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -883,13 +1021,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -907,10 +1041,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -931,12 +1070,14 @@
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -944,6 +1085,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -971,12 +1113,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -1002,16 +1142,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1020,6 +1163,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1079,7 +1223,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -1101,6 +1247,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -1125,9 +1272,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
new file mode 100644
index 0000000..fb9bdd9
--- /dev/null
+++ b/arch/mips/configs/mipssim_defconfig
@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:25 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+CONFIG_MIPS_SIM=y
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_MIPS_SIM_NET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 0fea57e..e2c0821 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:28 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,57 +59,86 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-CONFIG_VICTOR_MPC30X=y
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+CONFIG_VICTOR_MPC30X=y
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+CONFIG_VRC4173=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -122,12 +154,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -136,17 +192,26 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_VRC4173=y
#
# PCI Hotplug Support
@@ -161,6 +226,78 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -169,7 +306,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -188,7 +330,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -197,13 +338,11 @@
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -217,11 +356,35 @@
#
# ATA/ATAPI/MFM/RLL support
#
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -232,6 +395,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -244,79 +408,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -324,20 +422,14 @@
# CONFIG_ARCNET is not set
#
-# Ethernet (10 or 100Mbit)
+# PHY device support
#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
#
-# Tulip family network device support
+# Ethernet (10 or 100Mbit)
#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
#
# Ethernet (1000 Mbit)
@@ -349,12 +441,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -366,7 +462,59 @@
#
# Wireless LAN (non-hamradio)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
@@ -378,6 +526,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -407,19 +557,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -429,6 +566,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -439,16 +587,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -472,9 +620,20 @@
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -485,10 +644,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -508,7 +677,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -518,13 +686,120 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -542,21 +817,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -577,12 +860,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -609,9 +890,8 @@
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -620,6 +900,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -640,9 +921,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,19200"
#
# Security options
@@ -656,26 +939,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -687,9 +971,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index b4cf97a..ffb23fc 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:30 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,40 +60,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-CONFIG_MOMENCO_OCELOT_3=y
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+CONFIG_MOMENCO_OCELOT_3=y
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_MV64340=y
@@ -102,8 +133,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -119,6 +152,17 @@
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -126,13 +170,26 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -141,7 +198,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -150,10 +206,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -166,6 +218,110 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -174,7 +330,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -193,7 +354,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -205,7 +365,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -226,6 +385,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
@@ -237,6 +397,7 @@
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -251,6 +412,7 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -266,18 +428,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
@@ -286,6 +443,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -300,6 +459,8 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -312,105 +473,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -418,6 +487,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -440,7 +524,6 @@
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -463,9 +546,12 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
CONFIG_MV643XX_ETH_0=y
CONFIG_MV643XX_ETH_1=y
@@ -474,6 +560,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -486,6 +573,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -505,6 +594,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -531,19 +622,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -553,6 +631,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -573,6 +662,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -598,6 +688,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -608,10 +703,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -625,6 +730,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -632,6 +742,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -644,8 +755,11 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -675,13 +789,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -699,10 +809,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -715,17 +830,21 @@
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -746,15 +865,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -778,16 +892,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -797,6 +914,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -856,7 +974,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="ip=any root=nfs"
@@ -869,7 +989,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -879,9 +1023,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index a38903d..d3a5fee 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:33 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -40,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,39 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-CONFIG_MOMENCO_OCELOT_C=y
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+CONFIG_MOMENCO_OCELOT_C=y
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_MV64340=y
CONFIG_PCI_MARVELL=y
@@ -91,8 +124,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -108,6 +143,17 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -115,9 +161,23 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -126,7 +186,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -135,10 +194,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +211,79 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -164,7 +292,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -183,7 +316,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -194,7 +326,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -216,6 +347,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -226,6 +358,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -238,77 +371,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -316,6 +385,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -341,13 +425,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -360,6 +448,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -371,6 +461,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -400,19 +492,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -422,6 +501,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -442,6 +532,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -468,6 +559,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -478,10 +574,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -501,7 +607,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -511,13 +616,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -535,21 +636,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -570,12 +679,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -607,6 +714,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -615,6 +723,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -635,7 +744,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -649,7 +760,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -659,7 +794,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 920d59b..1edde12 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:35 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,40 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+CONFIG_MOMENCO_OCELOT=y
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_MIPS_GT64120=y
@@ -96,8 +127,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -113,6 +146,17 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -120,11 +164,25 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -140,10 +198,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -155,6 +209,79 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -166,6 +293,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -182,13 +314,11 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -211,6 +341,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -221,6 +352,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -231,77 +363,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
#
# Ethernet (10 or 100Mbit)
@@ -334,6 +417,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -363,18 +448,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -384,6 +457,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -425,10 +508,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -439,10 +525,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -462,7 +558,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -476,10 +571,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -492,24 +583,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -530,12 +628,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -567,6 +663,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -575,6 +672,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -595,7 +693,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -609,7 +709,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -619,7 +743,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index ef5ea50..e2d5188 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:38 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -40,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,39 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-CONFIG_MOMENCO_OCELOT_G=y
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+CONFIG_MOMENCO_OCELOT_G=y
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_PCI_MARVELL=y
@@ -94,8 +127,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -111,6 +146,17 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -118,9 +164,23 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -129,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -138,10 +197,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +214,79 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -167,7 +295,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -186,7 +319,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -197,7 +329,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -219,6 +350,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -229,6 +361,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -241,77 +374,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -319,6 +388,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -345,12 +429,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -363,6 +451,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -374,6 +464,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -403,19 +495,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -425,6 +504,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -445,6 +535,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -471,6 +562,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -481,10 +577,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -504,7 +610,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -514,13 +619,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -538,21 +639,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -573,12 +682,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -610,6 +717,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -618,6 +726,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -638,7 +747,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -652,7 +763,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -662,7 +797,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 813e3a8..47247ad 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:41 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,56 +59,70 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+CONFIG_MIPS_PB1100=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
CONFIG_SWAP_IO_SPACE=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -113,8 +130,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -130,15 +149,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
@@ -171,6 +216,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -181,15 +320,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -233,9 +377,8 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PB1100=y
-CONFIG_MTD_PB1500_BOOT=y
-CONFIG_MTD_PB1500_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -270,14 +413,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -300,6 +441,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -310,6 +452,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -320,94 +463,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -453,6 +530,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -482,18 +561,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -503,6 +570,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -534,14 +611,14 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -550,6 +627,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -560,10 +641,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -583,7 +674,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -593,12 +683,9 @@
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -613,7 +700,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -622,6 +712,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -640,10 +731,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -664,13 +757,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -704,6 +794,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -713,6 +804,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -772,7 +864,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -788,26 +882,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -819,9 +914,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 49e52834..f91a4ea 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:44 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,80 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -177,6 +222,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -187,12 +326,87 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -206,7 +420,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -218,7 +431,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -275,6 +487,7 @@
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +505,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -302,6 +516,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -314,94 +529,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -409,6 +543,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -435,12 +584,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -453,6 +606,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -484,6 +639,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -513,19 +670,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -535,6 +679,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -554,6 +709,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -585,6 +741,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -595,10 +756,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -612,7 +783,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -622,13 +792,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -646,12 +812,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -670,10 +841,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -694,13 +867,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -712,6 +882,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -732,6 +904,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -741,6 +914,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -800,7 +974,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -816,27 +992,28 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
@@ -847,9 +1024,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 8e42677..bbad27c 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:47 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,80 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -177,6 +222,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -187,12 +326,87 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -206,7 +420,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -218,7 +431,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -275,6 +487,7 @@
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +505,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -302,6 +516,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -314,94 +529,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -409,6 +543,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -435,12 +584,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -453,6 +606,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -476,6 +631,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -505,19 +662,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -527,6 +671,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -546,6 +701,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -577,6 +733,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -587,10 +748,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -604,7 +775,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -614,13 +784,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -638,12 +804,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,10 +833,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -686,13 +859,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -704,6 +874,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -724,6 +896,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -733,6 +906,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -792,7 +966,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -808,26 +984,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -839,9 +1016,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
new file mode 100644
index 0000000..95f84d7
--- /dev/null
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -0,0 +1,1069 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:50 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+CONFIG_PNX8550_JBS=y
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+CONFIG_CPU_R4X00=y
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
new file mode 100644
index 0000000..deb24c2
--- /dev/null
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -0,0 +1,1251 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:53 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_PNX8550_V2PCI=y
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+CONFIG_CPU_R4X00=y
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index b6568e42..741a9a9 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug 8 11:49:54 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:56 2005
#
CONFIG_MIPS=y
@@ -17,6 +17,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -25,6 +26,7 @@
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -74,6 +76,7 @@
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
@@ -91,6 +94,7 @@
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
@@ -105,7 +109,6 @@
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
@@ -119,7 +122,7 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
@@ -127,7 +130,7 @@
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
+# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
@@ -138,9 +141,11 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
@@ -151,15 +156,18 @@
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -214,8 +222,8 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
@@ -232,9 +240,15 @@
#
# Network testing
#
+# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -248,6 +262,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -265,13 +284,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -291,6 +309,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -331,6 +350,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -470,7 +504,6 @@
# I2C support
#
# CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
@@ -481,12 +514,17 @@
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -532,7 +570,6 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
#
# SN Devices
@@ -547,10 +584,6 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -559,6 +592,7 @@
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -576,11 +610,13 @@
#
# Pseudo filesystems
#
-# CONFIG_PROC_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -634,12 +670,35 @@
# Security options
#
# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -649,7 +708,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
new file mode 100644
index 0000000..2bc61ca
--- /dev/null
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -0,0 +1,1259 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:59 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+# CONFIG_KOBJECT_UEVENT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+CONFIG_TOSHIBA_RBTX4938=y
+
+#
+# Multiplex Pin Select
+#
+CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+CONFIG_TOSHIBA_BOARDS=y
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_TX49XX=y
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX49XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+# CONFIG_FB_ATY_XL_INIT is not set
+# CONFIG_FB_ATY_GX is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 17d4fce..988a058 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:03 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -26,14 +25,17 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -43,6 +45,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -58,43 +61,73 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
CONFIG_SNI_RM200_PCI=y
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -106,8 +139,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -123,24 +158,49 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+CONFIG_HW_HAS_EISA=y
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
@@ -151,11 +211,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -168,6 +223,281 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_YAM is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -176,7 +506,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -188,11 +523,11 @@
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
@@ -204,7 +539,6 @@
# Block devices
#
CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
@@ -249,7 +583,6 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -272,6 +605,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -284,6 +618,7 @@
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -297,17 +632,16 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -318,13 +652,9 @@
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
@@ -344,7 +674,6 @@
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -353,11 +682,12 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
@@ -384,11 +714,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -401,266 +735,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
-CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-CONFIG_AX25_DAMA_SLAVE=y
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
#
# ARCnet devices
@@ -668,6 +749,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -675,7 +771,6 @@
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -696,7 +791,6 @@
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
-# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
@@ -733,13 +827,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -752,6 +850,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -765,6 +865,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -794,20 +896,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PARKBD=m
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -828,6 +916,18 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_PARKBD=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -844,13 +944,13 @@
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -881,6 +981,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -891,15 +996,26 @@
CONFIG_W1=m
CONFIG_W1_MATROX=m
CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
+# CONFIG_W1_DS9490_BRIDGE is not set
CONFIG_W1_THERM=m
CONFIG_W1_SMEM=m
+# CONFIG_W1_DS2433 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -920,7 +1036,6 @@
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -930,6 +1045,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@@ -940,8 +1057,6 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -949,7 +1064,10 @@
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
@@ -965,11 +1083,10 @@
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -992,12 +1109,17 @@
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
+CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -1022,30 +1144,15 @@
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -1057,9 +1164,11 @@
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1088,6 +1197,7 @@
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_TI is not set
@@ -1110,10 +1220,13 @@
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -1132,10 +1245,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1152,17 +1270,20 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -1192,12 +1313,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -1224,15 +1343,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1256,6 +1378,7 @@
CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1329,7 +1452,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -1352,6 +1477,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -1360,13 +1486,13 @@
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -1376,9 +1502,12 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1dc935f3..4365d9c 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:05 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,32 +61,49 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
CONFIG_SIBYTE_SWARM=y
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
@@ -91,9 +112,12 @@
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_UNKNOWN is not set
-CONFIG_SIBYTE_BOARD=y
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_SIBYTE_SB1250=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
CONFIG_CPU_SB1_PASS_1=y
# CONFIG_CPU_SB1_PASS_2_1250 is not set
# CONFIG_CPU_SB1_PASS_2_2 is not set
@@ -102,18 +126,20 @@
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_LDT=y
# CONFIG_SIMULATION is not set
+# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_CONFIG_SB1_CERR_STALL is not set
CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_SB1250_PROF is not set
# CONFIG_SIBYTE_TBPROF is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -121,8 +147,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -138,22 +166,46 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_SB1_PASS_1_WORKAROUNDS=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -161,7 +213,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -170,10 +221,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -183,7 +230,86 @@
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -194,7 +320,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -213,7 +344,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -226,8 +356,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=9220
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -263,7 +391,7 @@
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
-CONFIG_BLK_DEV_IDE_SWARM=y
+# CONFIG_BLK_DEV_IDE_SWARM is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
@@ -272,6 +400,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -282,6 +411,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -294,78 +424,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -373,6 +438,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -399,12 +479,16 @@
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -417,6 +501,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -428,6 +514,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -445,25 +533,15 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -472,11 +550,13 @@
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
# CONFIG_STALDRV is not set
CONFIG_SIBYTE_SB1250_DUART=y
CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
@@ -489,6 +569,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -515,6 +596,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -525,10 +611,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -542,7 +638,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -552,13 +647,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -576,12 +667,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -591,10 +687,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -615,11 +713,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -643,13 +740,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -658,6 +756,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -678,7 +777,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_SB1XXX_CORELIS is not set
@@ -695,27 +796,28 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
@@ -726,9 +828,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index dd07e86..d835f6d 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:07 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,22 +11,26 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -39,6 +40,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -48,40 +50,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_SEAD=y
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -89,8 +120,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -106,15 +139,42 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -128,10 +188,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -143,6 +199,11 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
# Device Drivers
#
@@ -154,6 +215,10 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -170,7 +235,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -178,11 +242,8 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=18432
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -200,6 +261,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -210,6 +272,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -220,9 +283,8 @@
#
#
-# Networking support
+# Network device support
#
-# CONFIG_NET is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -238,47 +300,18 @@
#
# Input device support
#
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -294,7 +327,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
+CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -315,10 +348,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -329,10 +365,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -347,13 +393,6 @@
# CONFIG_FB is not set
#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
# Sound
#
# CONFIG_SOUND is not set
@@ -365,10 +404,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -381,28 +416,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -423,10 +461,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -448,8 +486,18 @@
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
@@ -464,15 +512,16 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
#
# Security options
#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -488,7 +537,6 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index c9d3f83..bf60a17 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:10 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,55 +59,87 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-CONFIG_TANBAC_TB0226=y
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+CONFIG_TANBAC_TB0226=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -120,19 +155,44 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_MMU=y
#
@@ -141,12 +201,9 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
+# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
@@ -156,6 +213,87 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -167,6 +305,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -183,19 +326,21 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -209,33 +354,12 @@
#
# ATA/ATAPI/MFM/RLL support
#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -245,15 +369,15 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
@@ -262,11 +386,42 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
@@ -277,131 +432,132 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_IEEE1394 is not set
#
# I2O device support
#
+# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
#
# Ethernet (1000 Mbit)
#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
#
# Token Ring devices
#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW2200 is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -421,28 +577,13 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -452,6 +593,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -462,16 +609,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -489,14 +636,22 @@
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_TANBAC_TB0219 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -507,10 +662,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -523,48 +688,147 @@
#
# Graphics support
#
-CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -582,39 +846,41 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -623,13 +889,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -653,16 +916,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -673,6 +939,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -732,9 +999,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
#
# Security options
@@ -746,7 +1015,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -756,9 +1049,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index 2cb6691..ac8b64e 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:13 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,58 +59,87 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0229=y
-CONFIG_TANBAC_TB0219=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -123,12 +155,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -136,8 +192,7 @@
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_MMU=y
#
@@ -146,10 +201,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +213,88 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -170,7 +303,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -189,7 +327,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -199,11 +336,11 @@
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -226,6 +363,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -236,6 +374,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -248,83 +387,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -332,6 +401,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -346,7 +430,7 @@
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
+# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -358,7 +442,11 @@
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -375,14 +463,19 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -395,6 +488,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -416,6 +511,8 @@
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -435,29 +532,13 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -467,6 +548,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -477,16 +564,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -505,14 +592,21 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
+CONFIG_TANBAC_TB0219=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -523,10 +617,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -546,7 +650,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -556,13 +659,122 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -580,10 +792,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -597,18 +814,22 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -635,13 +856,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -665,16 +883,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -685,6 +906,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -744,9 +966,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,38400 ip=bootp root=/dev/nfs"
+CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
@@ -758,7 +982,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -768,9 +1016,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 17b9f2f..9534483 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep 1 22:58:34 2005
+# Linux kernel version: 2.6.14-rc5-mm1
+# Tue Oct 25 00:20:22 2005
#
CONFIG_MIPS=y
@@ -19,6 +19,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -55,25 +56,67 @@
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
#
# Machine selection
#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
CONFIG_TANBAC_TB022X=y
# CONFIG_TANBAC_TB0226 is not set
CONFIG_TANBAC_TB0287=y
@@ -81,48 +124,23 @@
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -138,12 +156,25 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -152,6 +183,9 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -262,7 +296,6 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -280,6 +313,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -296,7 +334,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -312,6 +349,7 @@
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -321,6 +359,11 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ATA_OVER_ETH is not set
#
@@ -410,13 +453,20 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI Transport Layers
+#
+# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -425,12 +475,10 @@
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -462,6 +510,7 @@
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -529,6 +578,7 @@
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -572,6 +622,7 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
#
# Wan interfaces
@@ -682,6 +733,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -770,12 +822,15 @@
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -891,6 +946,11 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+
+#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
@@ -901,20 +961,22 @@
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
@@ -948,8 +1010,8 @@
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1004,6 +1066,11 @@
# CONFIG_NLS is not set
#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
@@ -1036,6 +1103,3 @@
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ISA_DMA_API=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 16e07fc..ab13621 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:16 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,56 +59,84 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-CONFIG_IBM_WORKPAD=y
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_VRC4171=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+CONFIG_IBM_WORKPAD=y
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -121,12 +152,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -138,11 +193,17 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
@@ -157,6 +218,78 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -165,7 +298,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -185,18 +323,13 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -219,6 +352,7 @@
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -237,6 +371,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -252,6 +387,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -262,76 +398,13 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -339,12 +412,26 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
@@ -373,6 +460,19 @@
# CONFIG_NET_RADIO is not set
#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+
+#
# Wan interfaces
#
# CONFIG_WAN is not set
@@ -380,6 +480,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -409,18 +511,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +520,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -440,16 +540,15 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -484,10 +583,19 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_GPIO_VR41XX is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -498,10 +606,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -522,7 +640,6 @@
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -536,10 +653,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -552,7 +665,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -561,6 +677,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -570,10 +687,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -594,12 +713,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -630,6 +747,7 @@
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -638,6 +756,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -658,9 +777,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M"
#
# Security options
@@ -672,7 +793,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -682,7 +827,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 6d22907..5b0b7f3 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:13 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:18 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,31 @@
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +45,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,34 +60,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-CONFIG_PMC_YOSEMITE=y
-# CONFIG_HYPERTRANSPORT is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_PMC_YOSEMITE=y
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_HYPERTRANSPORT is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_CPU_RM9K=y
@@ -93,8 +131,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -110,20 +150,43 @@
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -131,7 +194,7 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_MMU=y
#
@@ -140,10 +203,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -155,6 +214,69 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -163,10 +285,15 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -183,7 +310,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -193,7 +319,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -216,6 +341,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -226,6 +352,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -238,59 +365,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -303,6 +379,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -327,13 +418,16 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_TITAN_GE=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -346,6 +440,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -354,6 +450,8 @@
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -371,20 +469,10 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -405,6 +493,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -432,6 +521,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -442,10 +535,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -459,7 +562,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -469,13 +571,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -493,6 +591,10 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -500,13 +602,16 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -527,11 +632,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -552,7 +656,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -573,8 +677,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -599,7 +706,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -609,7 +740,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig
new file mode 100644
index 0000000..e9b5de4
--- /dev/null
+++ b/arch/mips/ddb5xxx/Kconfig
@@ -0,0 +1,4 @@
+config DDB5477_BUS_FREQUENCY
+ int "bus frequency (in kHZ, 0 for auto-detect)"
+ depends on DDB5477
+ default 0
diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
index 68c127c..8743ffc 100644
--- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
+++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
@@ -209,14 +209,13 @@
#define nile4_irq_shutdown nile4_disable_irq
static hw_irq_controller nile4_irq_controller = {
- "nile4",
- nile4_irq_startup,
- nile4_irq_shutdown,
- nile4_enable_irq,
- nile4_disable_irq,
- nile4_ack_irq,
- nile4_irq_end,
- NULL
+ .typename = "nile4",
+ .startup = nile4_irq_startup,
+ .shutdown = nile4_irq_shutdown,
+ .enable = nile4_enable_irq,
+ .disable = nile4_disable_irq,
+ .ack = nile4_ack_irq,
+ .end = nile4_irq_end,
};
void nile4_irq_setup(u32 base) {
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
index a73a597..11535be 100644
--- a/arch/mips/ddb5xxx/ddb5074/setup.c
+++ b/arch/mips/ddb5xxx/ddb5074/setup.c
@@ -85,7 +85,7 @@
-static void __init ddb5074_setup(void)
+void __init plat_setup(void)
{
set_io_port_base(NILE4_PCI_IO_BASE);
isa_slot_offset = NILE4_PCI_MEM_BASE;
@@ -106,8 +106,6 @@
panic_timeout = 180;
}
-early_initcall(ddb5074_setup);
-
#define USE_NILE4_SERIAL 0
#if USE_NILE4_SERIAL
diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
index 71531f8..f4e480a 100644
--- a/arch/mips/ddb5xxx/ddb5476/setup.c
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c
@@ -124,7 +124,7 @@
static void ddb5476_board_init(void);
-static void __init ddb5476_setup(void)
+void __init plat_setup(void)
{
set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
@@ -158,8 +158,6 @@
ddb5476_board_init();
}
-early_initcall(ddb5476_setup);
-
/*
* We don't trust bios. We essentially does hardware re-initialization
* as complete as possible, as far as we know we can safely do.
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
index a77682b..f66fe5b 100644
--- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
+++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
@@ -53,14 +53,13 @@
}
static hw_irq_controller vrc5476_irq_controller = {
- "vrc5476",
- vrc5476_irq_startup,
- vrc5476_irq_shutdown,
- vrc5476_irq_enable,
- vrc5476_irq_disable,
- vrc5476_irq_ack,
- vrc5476_irq_end,
- NULL /* no affinity stuff for UP */
+ .typename = "vrc5476",
+ .startup = vrc5476_irq_startup,
+ .shutdown = vrc5476_irq_shutdown,
+ .enable = vrc5476_irq_enable,
+ .disable = vrc5476_irq_disable,
+ .ack = vrc5476_irq_ack,
+ .end = vrc5476_irq_end
};
void __init
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
index 0d5e706..5fcd5f0 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
@@ -90,14 +90,13 @@
}
hw_irq_controller vrc5477_irq_controller = {
- "vrc5477_irq",
- vrc5477_irq_startup,
- vrc5477_irq_shutdown,
- vrc5477_irq_enable,
- vrc5477_irq_disable,
- vrc5477_irq_ack,
- vrc5477_irq_end,
- NULL /* no affinity stuff for UP */
+ .typename = "vrc5477_irq",
+ .startup = vrc5477_irq_startup,
+ .shutdown = vrc5477_irq_shutdown,
+ .enable = vrc5477_irq_enable,
+ .disable = vrc5477_irq_disable,
+ .ack = vrc5477_irq_ack,
+ .end = vrc5477_irq_end
};
void __init vrc5477_irq_init(u32 irq_base)
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index d62f5a7..8116335 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -170,7 +170,7 @@
extern struct pci_controller ddb5477_ext_controller;
extern struct pci_controller ddb5477_io_controller;
-static int ddb5477_setup(void)
+void __init plat_setup(void)
{
/* initialize board - we don't trust the loader */
ddb5477_board_init();
@@ -193,12 +193,8 @@
register_pci_controller (&ddb5477_ext_controller);
register_pci_controller (&ddb5477_io_controller);
-
- return 0;
}
-early_initcall(ddb5477_setup);
-
static void __init ddb5477_board_init(void)
{
/* ----------- setup PDARs ------------ */
diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index 688757a..ed181fd 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -2,8 +2,8 @@
# Makefile for the DECstation family specific parts of the kernel
#
-obj-y := ecc-berr.o int-handler.o ioasic-irq.o kn02-irq.o reset.o \
- setup.o time.o
+obj-y := ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
+ kn02-irq.o kn02xa-berr.o reset.o setup.o time.o
obj-$(CONFIG_PROM_CONSOLE) += promcon.o
obj-$(CONFIG_CPU_HAS_WB) += wbflush.o
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6dbce92..cc24c5e 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -6,7 +6,7 @@
* 5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
* 5900/260 (KN05) systems.
*
- * Copyright (c) 2003 Maciej W. Rozycki
+ * Copyright (c) 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -15,6 +15,7 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
@@ -57,7 +58,7 @@
const char *kind, *agent, *cycle, *event;
const char *status = "", *xbit = "", *fmt = "";
- dma_addr_t address;
+ unsigned long address;
u16 syn = 0, sngl;
int i = 0;
@@ -66,7 +67,7 @@
u32 chksyn = *kn0x_chksyn;
int action = MIPS_BE_FATAL;
- /* For non-ECC ack ASAP, so any subsequent errors get caught. */
+ /* For non-ECC ack ASAP, so that any subsequent errors get caught. */
if ((erraddr & (KN0X_EAR_VALID | KN0X_EAR_ECCERR)) == KN0X_EAR_VALID)
dec_ecc_be_ack();
@@ -74,7 +75,7 @@
if (!(erraddr & KN0X_EAR_VALID)) {
/* No idea what happened. */
- printk(KERN_ALERT "Unidentified bus error %s.\n", kind);
+ printk(KERN_ALERT "Unidentified bus error %s\n", kind);
return action;
}
@@ -126,7 +127,7 @@
/* Ack now, no rewrite will happen. */
dec_ecc_be_ack();
- fmt = KERN_ALERT "%s" "invalid.\n";
+ fmt = KERN_ALERT "%s" "invalid\n";
} else {
sngl = syn & KN0X_ESR_SNGLO;
syn &= KN0X_ESR_SYNLO;
@@ -144,7 +145,8 @@
} else if (!sngl) {
status = dbestr;
} else {
- volatile u32 *ptr = (void *)KSEG1ADDR(address);
+ volatile u32 *ptr =
+ (void *)CKSEG1ADDR(address);
*ptr = *ptr; /* Rewrite. */
iob();
@@ -160,12 +162,12 @@
if (syn == 0x01) {
fmt = KERN_ALERT "%s"
"%#04x -- %s bit error "
- "at check bit C%s.\n";
+ "at check bit C%s\n";
xbit = "X";
} else {
fmt = KERN_ALERT "%s"
"%#04x -- %s bit error "
- "at check bit C%s%u.\n";
+ "at check bit C%s%u\n";
}
i = syn >> 2;
} else {
@@ -175,16 +177,16 @@
if (i < 32)
fmt = KERN_ALERT "%s"
"%#04x -- %s bit error "
- "at data bit D%s%u.\n";
+ "at data bit D%s%u\n";
else
fmt = KERN_ALERT "%s"
- "%#04x -- %s bit error.\n";
+ "%#04x -- %s bit error\n";
}
}
}
if (action != MIPS_BE_FIXUP)
- printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx.\n",
+ printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
kind, agent, cycle, event, address);
if (action != MIPS_BE_FIXUP && erraddr & KN0X_EAR_ECCERR)
@@ -203,11 +205,11 @@
int action = dec_ecc_be_backend(regs, 0, 1);
if (action == MIPS_BE_DISCARD)
- return IRQ_NONE;
+ return IRQ_HANDLED;
/*
- * FIXME: Find affected processes and kill them, otherwise we
- * must die.
+ * FIXME: Find the affected processes and kill them, otherwise
+ * we must die.
*
* The interrupt is asynchronously delivered thus EPC and RA
* may be irrelevant, but are printed for a reference.
@@ -225,16 +227,16 @@
*/
static inline void dec_kn02_be_init(void)
{
- volatile u32 *csr = (void *)KN02_CSR_BASE;
+ volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
unsigned long flags;
- kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
- kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+ kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR);
+ kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN);
spin_lock_irqsave(&kn02_lock, flags);
/* Preset write-only bits of the Control Register cache. */
- cached_kn02_csr = *csr | KN03_CSR_LEDS;
+ cached_kn02_csr = *csr | KN02_CSR_LEDS;
/* Set normal ECC detection and generation. */
cached_kn02_csr &= ~(KN02_CSR_DIAGCHK | KN02_CSR_DIAGGEN);
@@ -248,11 +250,11 @@
static inline void dec_kn03_be_init(void)
{
- volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
- volatile u32 *mbcs = (void *)(KN03_SLOT_BASE + KN05_MB_CSR);
+ volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+ volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
- kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
- kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+ kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR);
+ kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN);
/*
* Set normal ECC detection and generation, enable ECC correction.
@@ -264,7 +266,7 @@
*mcr = (*mcr & ~(KN03_MCR_DIAGCHK | KN03_MCR_DIAGGEN)) |
KN03_MCR_CORRECT;
if (current_cpu_data.cputype == CPU_R4400SC)
- *mbcs |= KN05_MB_CSR_EE;
+ *mbcs |= KN4K_MB_CSR_EE;
fast_iob();
}
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index c89768d..41fa372 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -2,9 +2,9 @@
* arch/mips/dec/int-handler.S
*
* Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*
- * Written by Ralf Baechle and Andreas Busse, modified for DECStation
+ * Written by Ralf Baechle and Andreas Busse, modified for DECstation
* support by Paul Antoine and Harald Koerfgen.
*
* completly rewritten:
@@ -14,11 +14,12 @@
* by Maciej W. Rozycki.
*/
#include <linux/config.h>
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
+
#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic_addrs.h>
@@ -28,11 +29,14 @@
#include <asm/dec/kn02xa.h>
#include <asm/dec/kn03.h>
+#define KN02_CSR_BASE CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
+#define KN02XA_IOASIC_BASE CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
+#define KN03_IOASIC_BASE CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
.text
.set noreorder
/*
- * decstation_handle_int: Interrupt handler for DECStations
+ * decstation_handle_int: Interrupt handler for DECstations
*
* We follow the model in the Indy interrupt code by David Miller, where he
* says: a lot of complication here is taken away because:
@@ -48,7 +52,7 @@
* 3) Linux only thinks in terms of all IRQs on or all IRQs
* off, nothing in between like BSD spl() brain-damage.
*
- * Furthermore, the IRQs on the DECStations look basically (barring
+ * Furthermore, the IRQs on the DECstations look basically (barring
* software IRQs which we don't use at all) like...
*
* DS2100/3100's, aka kn01, aka Pmax:
@@ -61,7 +65,7 @@
* 3 Lance Ethernet
* 4 DZ11 serial
* 5 RTC
- * 6 Memory Controller
+ * 6 Memory Controller & Video
* 7 FPU
*
* DS5000/200, aka kn02, aka 3max:
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
index 0000000..b9271db
--- /dev/null
+++ b/arch/mips/dec/kn01-berr.c
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/mips/dec/kn01-berr.c
+ *
+ * Bus error event handling code for DECstation/DECsystem 3100
+ * and 2100 (KN01) systems equipped with parity error detection
+ * logic.
+ *
+ * Copyright (c) 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/inst.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+
+#include <asm/dec/kn01.h>
+
+
+/* CP0 hazard avoidance. */
+#define BARRIER \
+ __asm__ __volatile__( \
+ ".set push\n\t" \
+ ".set noreorder\n\t" \
+ "nop\n\t" \
+ ".set pop\n\t")
+
+/*
+ * Bits 7:0 of the Control Register are write-only -- the
+ * corresponding bits of the Status Register have a different
+ * meaning. Hence we use a cache. It speeds up things a bit
+ * as well.
+ *
+ * There is no default value -- it has to be initialized.
+ */
+u16 cached_kn01_csr;
+DEFINE_SPINLOCK(kn01_lock);
+
+
+static inline void dec_kn01_be_ack(void)
+{
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+ unsigned long flags;
+
+ spin_lock_irqsave(&kn01_lock, flags);
+
+ *csr = cached_kn01_csr | KN01_CSR_MEMERR; /* Clear bus IRQ. */
+ iob();
+
+ spin_unlock_irqrestore(&kn01_lock, flags);
+}
+
+static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
+{
+ volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE +
+ KN01_ERRADDR);
+
+ static const char excstr[] = "exception";
+ static const char intstr[] = "interrupt";
+ static const char cpustr[] = "CPU";
+ static const char mreadstr[] = "memory read";
+ static const char readstr[] = "read";
+ static const char writestr[] = "write";
+ static const char timestr[] = "timeout";
+ static const char paritystr[] = "parity error";
+
+ int data = regs->cp0_cause & 4;
+ unsigned int __user *pc = (unsigned int __user *)regs->cp0_epc +
+ ((regs->cp0_cause & CAUSEF_BD) != 0);
+ union mips_instruction insn;
+ unsigned long entrylo, offset;
+ long asid, entryhi, vaddr;
+
+ const char *kind, *agent, *cycle, *event;
+ unsigned long address;
+
+ u32 erraddr = *kn01_erraddr;
+ int action = MIPS_BE_FATAL;
+
+ /* Ack ASAP, so that any subsequent errors get caught. */
+ dec_kn01_be_ack();
+
+ kind = invoker ? intstr : excstr;
+
+ agent = cpustr;
+
+ if (invoker)
+ address = erraddr;
+ else {
+ /* Bloody hardware doesn't record the address for reads... */
+ if (data) {
+ /* This never faults. */
+ __get_user(insn.word, pc);
+ vaddr = regs->regs[insn.i_format.rs] +
+ insn.i_format.simmediate;
+ } else
+ vaddr = (long)pc;
+ if (KSEGX(vaddr) == CKSEG0 || KSEGX(vaddr) == CKSEG1)
+ address = CPHYSADDR(vaddr);
+ else {
+ /* Peek at what physical address the CPU used. */
+ asid = read_c0_entryhi();
+ entryhi = asid & (PAGE_SIZE - 1);
+ entryhi |= vaddr & ~(PAGE_SIZE - 1);
+ write_c0_entryhi(entryhi);
+ BARRIER;
+ tlb_probe();
+ /* No need to check for presence. */
+ tlb_read();
+ entrylo = read_c0_entrylo0();
+ write_c0_entryhi(asid);
+ offset = vaddr & (PAGE_SIZE - 1);
+ address = (entrylo & ~(PAGE_SIZE - 1)) | offset;
+ }
+ }
+
+ /* Treat low 256MB as memory, high -- as I/O. */
+ if (address < 0x10000000) {
+ cycle = mreadstr;
+ event = paritystr;
+ } else {
+ cycle = invoker ? writestr : readstr;
+ event = timestr;
+ }
+
+ if (is_fixup)
+ action = MIPS_BE_FIXUP;
+
+ if (action != MIPS_BE_FIXUP)
+ printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+ kind, agent, cycle, event, address);
+
+ return action;
+}
+
+int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ return dec_kn01_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+ int action;
+
+ if (!(*csr & KN01_CSR_MEMERR))
+ return IRQ_NONE; /* Must have been video. */
+
+ action = dec_kn01_be_backend(regs, 0, 1);
+
+ if (action == MIPS_BE_DISCARD)
+ return IRQ_HANDLED;
+
+ /*
+ * FIXME: Find the affected processes and kill them, otherwise
+ * we must die.
+ *
+ * The interrupt is asynchronously delivered thus EPC and RA
+ * may be irrelevant, but are printed for a reference.
+ */
+ printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+ regs->cp0_epc, regs->regs[31]);
+ die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn01_be_init(void)
+{
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+ unsigned long flags;
+
+ spin_lock_irqsave(&kn01_lock, flags);
+
+ /* Preset write-only bits of the Control Register cache. */
+ cached_kn01_csr = *csr;
+ cached_kn01_csr &= KN01_CSR_STATUS | KN01_CSR_PARDIS | KN01_CSR_TXDIS;
+ cached_kn01_csr |= KN01_CSR_LEDS;
+
+ /* Enable parity error detection. */
+ cached_kn01_csr &= ~KN01_CSR_PARDIS;
+ *csr = cached_kn01_csr;
+ iob();
+
+ spin_unlock_irqrestore(&kn01_lock, flags);
+
+ /* Clear any leftover errors from the firmware. */
+ dec_kn01_be_ack();
+}
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index e0bfcd1..898bed5 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -4,7 +4,7 @@
* DECstation 5000/200 (KN02) Control and Status Register
* interrupts.
*
- * Copyright (c) 2002, 2003 Maciej W. Rozycki
+ * Copyright (c) 2002, 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -37,7 +37,8 @@
static inline void unmask_kn02_irq(unsigned int irq)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16));
*csr = cached_kn02_csr;
@@ -45,7 +46,8 @@
static inline void mask_kn02_irq(unsigned int irq)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16));
*csr = cached_kn02_csr;
@@ -105,13 +107,14 @@
void __init init_kn02_irqs(int base)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
unsigned long flags;
int i;
/* Mask interrupts. */
spin_lock_irqsave(&kn02_lock, flags);
- cached_kn02_csr &= ~KN03_CSR_IOINTEN;
+ cached_kn02_csr &= ~KN02_CSR_IOINTEN;
*csr = cached_kn02_csr;
iob();
spin_unlock_irqrestore(&kn02_lock, flags);
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
new file mode 100644
index 0000000..6cd3f94
--- /dev/null
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/mips/dec/kn02xa-berr.c
+ *
+ * Bus error event handling code for 5000-series systems equipped
+ * with parity error detection logic, i.e. DECstation/DECsystem
+ * 5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
+ * DECstation/DECsystem 5000/20, /25, /33 (KN02-CA), 5000/50
+ * (KN04-CA) systems.
+ *
+ * Copyright (c) 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+#include <asm/dec/kn02ca.h>
+#include <asm/dec/kn02xa.h>
+#include <asm/dec/kn05.h>
+
+static inline void dec_kn02xa_be_ack(void)
+{
+ volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
+ volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
+
+ *mer = KN02CA_MER_INTR; /* Clear errors; keep the ARC IRQ. */
+ *mem_intr = 0; /* Any write clears the bus IRQ. */
+ iob();
+}
+
+static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
+ int invoker)
+{
+ volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
+ volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
+
+ static const char excstr[] = "exception";
+ static const char intstr[] = "interrupt";
+ static const char cpustr[] = "CPU";
+ static const char mreadstr[] = "memory read";
+ static const char readstr[] = "read";
+ static const char writestr[] = "write";
+ static const char timestr[] = "timeout";
+ static const char paritystr[] = "parity error";
+ static const char lanestat[][4] = { " OK", "BAD" };
+
+ const char *kind, *agent, *cycle, *event;
+ unsigned long address;
+
+ u32 mer = *kn02xa_mer;
+ u32 ear = *kn02xa_ear;
+ int action = MIPS_BE_FATAL;
+
+ /* Ack ASAP, so that any subsequent errors get caught. */
+ dec_kn02xa_be_ack();
+
+ kind = invoker ? intstr : excstr;
+
+ /* No DMA errors? */
+ agent = cpustr;
+
+ address = ear & KN02XA_EAR_ADDRESS;
+
+ /* Low 256MB is decoded as memory, high -- as TC. */
+ if (address < 0x10000000) {
+ cycle = mreadstr;
+ event = paritystr;
+ } else {
+ cycle = invoker ? writestr : readstr;
+ event = timestr;
+ }
+
+ if (is_fixup)
+ action = MIPS_BE_FIXUP;
+
+ if (action != MIPS_BE_FIXUP)
+ printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+ kind, agent, cycle, event, address);
+
+ if (action != MIPS_BE_FIXUP && address < 0x10000000)
+ printk(KERN_ALERT " Byte lane status %#3x -- "
+ "#3: %s, #2: %s, #1: %s, #0: %s\n",
+ (mer & KN02XA_MER_BYTERR) >> 8,
+ lanestat[(mer & KN02XA_MER_BYTERR_3) != 0],
+ lanestat[(mer & KN02XA_MER_BYTERR_2) != 0],
+ lanestat[(mer & KN02XA_MER_BYTERR_1) != 0],
+ lanestat[(mer & KN02XA_MER_BYTERR_0) != 0]);
+
+ return action;
+}
+
+int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ return dec_kn02xa_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ int action = dec_kn02xa_be_backend(regs, 0, 1);
+
+ if (action == MIPS_BE_DISCARD)
+ return IRQ_HANDLED;
+
+ /*
+ * FIXME: Find the affected processes and kill them, otherwise
+ * we must die.
+ *
+ * The interrupt is asynchronously delivered thus EPC and RA
+ * may be irrelevant, but are printed for a reference.
+ */
+ printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+ regs->cp0_epc, regs->regs[31]);
+ die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn02xa_be_init(void)
+{
+ volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
+
+ /* For KN04 we need to make sure EE (?) is enabled in the MB. */
+ if (current_cpu_data.cputype == CPU_R4000SC)
+ *mbcs |= KN4K_MB_CSR_EE;
+ fast_iob();
+
+ /* Clear any leftover errors from the firmware. */
+ dec_kn02xa_be_ack();
+}
diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c
index 9380588..81d5e87 100644
--- a/arch/mips/dec/prom/identify.c
+++ b/arch/mips/dec/prom/identify.c
@@ -2,7 +2,7 @@
* identify.c: machine identification code.
*
* Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine
- * Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005 Maciej W. Rozycki
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <asm/bootinfo.h>
+
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
@@ -21,6 +22,7 @@
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
#include <asm/dec/prom.h>
+#include <asm/dec/system.h>
#include "dectypes.h"
@@ -68,34 +70,44 @@
static inline void prom_init_kn01(void)
{
- dec_rtc_base = (void *)KN01_RTC_BASE;
+ dec_kn_slot_base = KN01_SLOT_BASE;
dec_kn_slot_size = KN01_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
}
static inline void prom_init_kn230(void)
{
- dec_rtc_base = (void *)KN01_RTC_BASE;
+ dec_kn_slot_base = KN01_SLOT_BASE;
dec_kn_slot_size = KN01_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
}
static inline void prom_init_kn02(void)
{
- dec_rtc_base = (void *)KN02_RTC_BASE;
+ dec_kn_slot_base = KN02_SLOT_BASE;
dec_kn_slot_size = KN02_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC);
}
static inline void prom_init_kn02xa(void)
{
- ioasic_base = (void *)KN02XA_IOASIC_BASE;
- dec_rtc_base = (void *)KN02XA_RTC_BASE;
+ dec_kn_slot_base = KN02XA_SLOT_BASE;
dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+ ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
}
static inline void prom_init_kn03(void)
{
- ioasic_base = (void *)KN03_IOASIC_BASE;
- dec_rtc_base = (void *)KN03_RTC_BASE;
+ dec_kn_slot_base = KN03_SLOT_BASE;
dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+ ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
}
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 60f7425..32a7cc7 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -6,6 +6,8 @@
*/
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
#include <linux/smp.h>
#include <linux/string.h>
#include <linux/types.h>
@@ -85,17 +87,13 @@
void __init prom_init(void)
{
- extern void dec_machine_halt(void);
+ extern void ATTRIB_NORET dec_machine_halt(void);
static char cpu_msg[] __initdata =
"Sorry, this kernel is compiled for a wrong CPU type!\n";
- static char r3k_msg[] __initdata =
- "Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
- static char r4k_msg[] __initdata =
- "Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
s32 argc = fw_arg0;
- s32 argv = fw_arg1;
+ s32 *argv = (void *)fw_arg1;
u32 magic = fw_arg2;
- s32 prom_vec = fw_arg3;
+ s32 *prom_vec = (void *)fw_arg3;
/*
* Determine which PROM we have
@@ -113,6 +111,8 @@
#if defined(CONFIG_CPU_R3000)
if ((current_cpu_data.cputype == CPU_R4000SC) ||
(current_cpu_data.cputype == CPU_R4400SC)) {
+ static char r4k_msg[] __initdata =
+ "Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
printk(cpu_msg);
printk(r4k_msg);
dec_machine_halt();
@@ -122,6 +122,8 @@
#if defined(CONFIG_CPU_R4X00)
if ((current_cpu_data.cputype == CPU_R3000) ||
(current_cpu_data.cputype == CPU_R3000A)) {
+ static char r3k_msg[] __initdata =
+ "Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
printk(cpu_msg);
printk(r3k_msg);
dec_machine_halt();
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index e4f6f26..83d4556 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -35,22 +35,22 @@
extern char genexcept_early;
/* Install exception handler */
- memcpy(&old_handler, (void *)(KSEG0 + 0x80), 0x80);
- memcpy((void *)(KSEG0 + 0x80), &genexcept_early, 0x80);
+ memcpy(&old_handler, (void *)(CKSEG0 + 0x80), 0x80);
+ memcpy((void *)(CKSEG0 + 0x80), &genexcept_early, 0x80);
/* read unmapped and uncached (KSEG1)
* DECstations have at least 4MB RAM
* Assume less than 480MB of RAM, as this is max for 5000/2xx
* FIXME this should be replaced by the first free page!
*/
- for (memory_page = (unsigned char *) KSEG1 + CHUNK_SIZE;
- (mem_err== 0) && (memory_page < ((unsigned char *) KSEG1+0x1E000000));
+ for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
+ mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
memory_page += CHUNK_SIZE) {
dummy = *memory_page;
}
- memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80);
+ memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
- add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE,
+ add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
BOOT_MEM_RAM);
}
@@ -65,7 +65,7 @@
memmap *bm;
/* some free 64k */
- bm = (memmap *)KSEG0ADDR(0x28000);
+ bm = (memmap *)CKSEG0ADDR(0x28000);
bitmap_size = rex_getbitmap(bm);
diff --git a/arch/mips/dec/reset.c b/arch/mips/dec/reset.c
index 7e4d34d..f78c6da 100644
--- a/arch/mips/dec/reset.c
+++ b/arch/mips/dec/reset.c
@@ -14,7 +14,7 @@
static inline void ATTRIB_NORET back_to_prom(void)
{
- noret_func_t func = (void *) KSEG1ADDR(0x1fc00000);
+ noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
func();
}
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 6a69309..9ef54fe 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -1,19 +1,20 @@
/*
- * Setup the interrupt stuff.
+ * System-specific setup, especially interrupts.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1998 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*/
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/param.h>
#include <linux/console.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
@@ -38,6 +39,7 @@
#include <asm/dec/kn02ca.h>
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
+#include <asm/dec/system.h>
extern void dec_machine_restart(char *command);
@@ -47,10 +49,16 @@
extern asmlinkage void decstation_handle_int(void);
+unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+EXPORT_SYMBOL(dec_kn_slot_base);
+EXPORT_SYMBOL(dec_kn_slot_size);
+
spinlock_t ioasic_ssr_lock;
volatile u32 *ioasic_base;
-unsigned long dec_kn_slot_size;
+
+EXPORT_SYMBOL(ioasic_base);
/*
* IRQ routing and priority tables. Priorites are set as follows:
@@ -77,6 +85,9 @@
int dec_interrupt[DEC_NR_INTS] = {
[0 ... DEC_NR_INTS - 1] = -1
};
+
+EXPORT_SYMBOL(dec_interrupt);
+
int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
};
@@ -108,11 +119,20 @@
/*
* Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
*/
-void __init dec_be_init(void)
+static void __init dec_be_init(void)
{
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
+ board_be_handler = dec_kn01_be_handler;
+ busirq.handler = dec_kn01_be_interrupt;
busirq.flags |= SA_SHIRQ;
+ dec_kn01_be_init();
+ break;
+ case MACH_DS5000_1XX: /* DS5000/1xx 3min */
+ case MACH_DS5000_XX: /* DS5000/xx Maxine */
+ board_be_handler = dec_kn02xa_be_handler;
+ busirq.handler = dec_kn02xa_be_interrupt;
+ dec_kn02xa_be_init();
break;
case MACH_DS5000_200: /* DS5000/200 3max */
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
@@ -128,7 +148,7 @@
extern void dec_time_init(void);
extern void dec_timer_setup(struct irqaction *);
-static void __init decstation_setup(void)
+void __init plat_setup(void)
{
board_be_init = dec_be_init;
board_time_init = dec_time_init;
@@ -139,9 +159,10 @@
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
_machine_power_off = dec_machine_power_off;
-}
-early_initcall(decstation_setup);
+ ioport_resource.start = ~0UL;
+ ioport_resource.end = 0UL;
+}
/*
* Machine-specific initialisation for KN01, aka DS2100 (aka Pmin)
@@ -206,7 +227,7 @@
{ .p = cpu_all_int } },
};
-void __init dec_init_kn01(void)
+static void __init dec_init_kn01(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn01_interrupt,
@@ -281,7 +302,7 @@
{ .p = cpu_all_int } },
};
-void __init dec_init_kn230(void)
+static void __init dec_init_kn230(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn230_interrupt,
@@ -371,7 +392,7 @@
{ .p = kn02_all_int } },
};
-void __init dec_init_kn02(void)
+static void __init dec_init_kn02(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02_interrupt,
@@ -472,7 +493,7 @@
{ .p = asic_all_int } },
};
-void __init dec_init_kn02ba(void)
+static void __init dec_init_kn02ba(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02ba_interrupt,
@@ -569,7 +590,7 @@
{ .p = asic_all_int } },
};
-void __init dec_init_kn02ca(void)
+static void __init dec_init_kn02ca(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02ca_interrupt,
@@ -670,7 +691,7 @@
{ .p = asic_all_int } },
};
-void __init dec_init_kn03(void)
+static void __init dec_init_kn03(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn03_interrupt,
@@ -744,7 +765,3 @@
if (dec_interrupt[DEC_IRQ_HALT] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
}
-
-EXPORT_SYMBOL(ioasic_base);
-EXPORT_SYMBOL(dec_kn_slot_size);
-EXPORT_SYMBOL(dec_interrupt);
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 20f84b1..4b585e6 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:48:59 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:09 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,41 +60,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_ARC32=y
@@ -103,8 +134,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -120,22 +153,48 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+CONFIG_HW_HAS_EISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
@@ -145,10 +204,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -160,115 +215,7 @@
CONFIG_TRAD_SIGNALS=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -277,12 +224,14 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +245,10 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -341,6 +292,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
@@ -348,11 +302,15 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,9 +334,12 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -395,12 +356,14 @@
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -410,7 +373,7 @@
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +392,16 @@
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -456,10 +424,6 @@
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
@@ -479,6 +443,7 @@
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
@@ -489,6 +454,7 @@
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
@@ -496,17 +462,153 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -540,6 +642,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -569,18 +673,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +690,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -644,11 +746,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -659,10 +764,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -693,7 +808,6 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -707,10 +821,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -723,13 +833,17 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +855,14 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
@@ -754,6 +870,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -781,12 +898,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -811,15 +926,20 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +955,7 @@
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -908,7 +1029,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -931,6 +1054,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1066,10 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -955,9 +1079,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c
index 28bd908..78dbb18 100644
--- a/arch/mips/galileo-boards/ev96100/setup.c
+++ b/arch/mips/galileo-boards/ev96100/setup.c
@@ -55,7 +55,7 @@
unsigned char mac_0_1[12];
-static void __init ev96100_setup(void)
+void __init plat_setup(void)
{
unsigned int config = read_c0_config();
unsigned int status = read_c0_status();
@@ -142,8 +142,6 @@
tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
}
-early_initcall(ev96100_setup);
-
unsigned short get_gt_devid(void)
{
u32 gt_devid;
diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig
new file mode 100644
index 0000000..d691762
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/Kconfig
@@ -0,0 +1,3 @@
+config EVB_PCI1
+ bool "Enable Second PCI (PCI1)"
+ depends on MIPS_EV64120
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index dba0961..98b5a96 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -69,7 +69,7 @@
*/
extern void gt64120_time_init(void);
-static void __init ev64120_setup(void)
+void __init plat_setup(void)
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
@@ -79,8 +79,6 @@
set_io_port_base(KSEG1);
}
-early_initcall(ev64120_setup);
-
const char *get_system_type(void)
{
return "Galileo EV64120A";
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index d610f8c..0d07c33 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -150,7 +150,7 @@
gt64120_base = 0xe0000000;
}
-static void __init momenco_ocelot_setup(void)
+void __init plat_setup(void)
{
void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
unsigned int tmpword;
@@ -307,8 +307,6 @@
GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
}
-early_initcall(momenco_ocelot_setup);
-
extern int rm7k_tcache_enabled;
/*
* This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig
new file mode 100644
index 0000000..a6d59ad
--- /dev/null
+++ b/arch/mips/ite-boards/Kconfig
@@ -0,0 +1,8 @@
+config IT8172_REVC
+ bool "Support for older IT8172 (Rev C)"
+ depends on MIPS_ITE8172
+ help
+ Say Y here to support the older, Revision C version of the Integrated
+ Technology Express, Inc. ITE8172 SBC. Vendor page at
+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
index cb71b90..e67f961 100644
--- a/arch/mips/ite-boards/generic/irq.c
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -138,14 +138,13 @@
}
static struct hw_interrupt_type it8172_irq_type = {
- "ITE8172",
- startup_ite_irq,
- shutdown_ite_irq,
- enable_it8172_irq,
- disable_it8172_irq,
- mask_and_ack_ite_irq,
- end_ite_irq,
- NULL
+ .typename = "ITE8172",
+ .startup = startup_ite_irq,
+ .shutdown = shutdown_ite_irq,
+ .enable = enable_it8172_irq,
+ .disable = disable_it8172_irq,
+ .ack = mask_and_ack_ite_irq,
+ .end = end_ite_irq,
};
@@ -159,13 +158,13 @@
#define end_none enable_none
static struct hw_interrupt_type cp0_irq_type = {
- "CP0 Count",
- startup_none,
- shutdown_none,
- enable_none,
- disable_none,
- ack_none,
- end_none
+ .typename = "CP0 Count",
+ .startup = startup_none,
+ .shutdown = shutdown_none,
+ .enable = enable_none,
+ .disable = disable_none,
+ .ack = ack_none,
+ .end = end_none
};
void enable_cpu_timer(void)
@@ -182,7 +181,6 @@
int i;
unsigned long flags;
- memset(irq_desc, 0, sizeof(irq_desc));
set_except_vector(0, it8172_IRQ);
/* mask all interrupts */
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
index a5f6d84..062429d 100644
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -105,7 +105,7 @@
it8172_resources.ram.end = memsize;
}
-static void __init it8172_setup(void)
+void __init plat_setup(void)
{
unsigned short dsr;
char *argptr;
@@ -251,8 +251,6 @@
#endif /* CONFIG_IT8172_SCR1 */
}
-early_initcall(it8172_setup);
-
#ifdef CONFIG_SERIO_I8042
/*
* According to the ITE Special BIOS Note for waking up the
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
new file mode 100644
index 0000000..1f372b0
--- /dev/null
+++ b/arch/mips/jazz/Kconfig
@@ -0,0 +1,33 @@
+config ACER_PICA_61
+ bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
+ depends on MACH_JAZZ && EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+ kernel that runs on these, say Y here. For details about Linux on
+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+ <http://www.linux-mips.org/>.
+
+config MIPS_MAGNUM_4000
+ bool "Support for MIPS Magnum 4000"
+ depends on MACH_JAZZ
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
+ kernel that runs on these, say Y here. For details about Linux on
+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+ <http://www.linux-mips.org/>.
+
+config OLIVETTI_M700
+ bool "Support for Olivetti M700-10"
+ depends on MACH_JAZZ
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
+ kernel that runs on these, say Y here. For details about Linux on
+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+ <http://www.linux-mips.org/>.
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 0b608fa..b309b1b 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -58,14 +58,13 @@
}
static struct hw_interrupt_type r4030_irq_type = {
- "R4030",
- startup_r4030_irq,
- shutdown_r4030_irq,
- enable_r4030_irq,
- disable_r4030_irq,
- mask_and_ack_r4030_irq,
- end_r4030_irq,
- NULL
+ .typename = "R4030",
+ .startup = startup_r4030_irq,
+ .shutdown = shutdown_r4030_irq,
+ .enable = enable_r4030_irq,
+ .disable = disable_r4030_irq,
+ .ack = mask_and_ack_r4030_irq,
+ .end = end_r4030_irq,
};
void __init init_r4030_ints(void)
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index fccb06f..044df9d 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -50,7 +50,7 @@
{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
};
-static void __init jazz_setup(void)
+void __init plat_setup(void)
{
int i;
@@ -97,5 +97,3 @@
vdma_init();
}
-
-early_initcall(jazz_setup);
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index b9799b8..7cbe144 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -412,13 +412,13 @@
}
static hw_irq_controller jmr3927_irq_controller = {
- "jmr3927_irq",
- jmr3927_irq_startup,
- jmr3927_irq_shutdown,
- jmr3927_irq_enable,
- jmr3927_irq_disable,
- jmr3927_irq_ack,
- jmr3927_irq_end,
+ .typename = "jmr3927_irq",
+ .startup = jmr3927_irq_startup,
+ .shutdown = jmr3927_irq_shutdown,
+ .enable = jmr3927_irq_enable,
+ .disable = jmr3927_irq_disable,
+ .ack = jmr3927_irq_ack,
+ .end = jmr3927_irq_end,
};
void jmr3927_irq_init(u32 irq_base)
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 32039bb..3e2fbdc 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -44,6 +44,11 @@
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
#include <asm/addrspace.h>
#include <asm/time.h>
@@ -193,7 +198,7 @@
extern struct resource pci_io_resource;
extern struct resource pci_mem_resource;
-static void __init jmr3927_setup(void)
+void __init plat_setup(void)
{
char *argptr;
@@ -211,8 +216,8 @@
*/
ioport_resource.start = pci_io_resource.start;
ioport_resource.end = pci_io_resource.end;
- iomem_resource.start = pci_mem_resource.start;
- iomem_resource.end = pci_mem_resource.end;
+ iomem_resource.start = 0;
+ iomem_resource.end = 0xffffffff;
/* Reboot on panic */
panic_timeout = 180;
@@ -265,18 +270,35 @@
strcat(argptr, " ip=bootp");
}
-#ifdef CONFIG_TXX927_SERIAL_CONSOLE
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (char *)TX3927_SIO_REG(i);
+ req.mapbase = TX3927_SIO_REG(i);
+ req.irq = i == 0 ?
+ JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
+ if (i == 0)
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = JMR3927_IMCLK;
+ early_serial_txx9_setup(&req);
+ }
+ }
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "console=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS1,115200");
}
#endif
+#endif
}
-early_initcall(jmr3927_setup);
-
-
static void tx3927_setup(void);
#ifdef CONFIG_PCI
@@ -335,7 +357,7 @@
jmr3927_io_dipsw());
}
-static void __init tx3927_setup(void)
+void __init plat_setup(void)
{
int i;
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d330358..72f2126 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,11 +11,7 @@
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
-ifdef CONFIG_MODULES
-obj-y += mips_ksyms.o module.o
-obj-$(CONFIG_32BIT) += module-elf32.o
-obj-$(CONFIG_64BIT) += module-elf64.o
-endif
+obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o
@@ -38,12 +34,18 @@
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o
+
+obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
+obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+
obj-$(CONFIG_NO_ISA) += dma-no-isa.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o
obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o
+obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o
obj-$(CONFIG_32BIT) += scall32-o32.o
obj-$(CONFIG_64BIT) += scall64-64.o
@@ -57,8 +59,6 @@
obj-$(CONFIG_64BIT) += cpu-bugs64.o
-obj-$(CONFIG_GEN_RTC) += genrtc.o
-
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
CFLAGS_ioctl32.o += -Ifs/
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 2c11abb..ca6b03c 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -95,6 +95,7 @@
offset("#define TI_PRE_COUNT ", struct thread_info, preempt_count);
offset("#define TI_ADDR_LIMIT ", struct thread_info, addr_limit);
offset("#define TI_RESTART_BLOCK ", struct thread_info, restart_block);
+ offset("#define TI_TP_VALUE ", struct thread_info, tp_value);
constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
constant("#define _THREAD_SIZE ", THREAD_SIZE);
constant("#define _THREAD_MASK ", THREAD_MASK);
@@ -240,6 +241,7 @@
linefeed;
}
+#ifdef CONFIG_32BIT
void output_sc_defines(void)
{
text("/* Linux sigcontext offsets. */");
@@ -251,10 +253,29 @@
offset("#define SC_STATUS ", struct sigcontext, sc_status);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
offset("#define SC_FPC_EIR ", struct sigcontext, sc_fpc_eir);
- offset("#define SC_CAUSE ", struct sigcontext, sc_cause);
- offset("#define SC_BADVADDR ", struct sigcontext, sc_badvaddr);
+ offset("#define SC_HI1 ", struct sigcontext, sc_hi1);
+ offset("#define SC_LO1 ", struct sigcontext, sc_lo1);
+ offset("#define SC_HI2 ", struct sigcontext, sc_hi2);
+ offset("#define SC_LO2 ", struct sigcontext, sc_lo2);
+ offset("#define SC_HI3 ", struct sigcontext, sc_hi3);
+ offset("#define SC_LO3 ", struct sigcontext, sc_lo3);
linefeed;
}
+#endif
+
+#ifdef CONFIG_64BIT
+void output_sc_defines(void)
+{
+ text("/* Linux sigcontext offsets. */");
+ offset("#define SC_REGS ", struct sigcontext, sc_regs);
+ offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
+ offset("#define SC_MDHI ", struct sigcontext, sc_hi);
+ offset("#define SC_MDLO ", struct sigcontext, sc_lo);
+ offset("#define SC_PC ", struct sigcontext, sc_pc);
+ offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
+ linefeed;
+}
+#endif
#ifdef CONFIG_MIPS32_COMPAT
void output_sc32_defines(void)
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 6b645fb..d8e2674a1 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -52,7 +52,6 @@
#include <asm/processor.h>
#include <linux/module.h>
-#include <linux/config.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -116,4 +115,7 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
#include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index b4075e9..cec5f32 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -54,7 +54,6 @@
#include <asm/processor.h>
#include <linux/module.h>
-#include <linux/config.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -98,7 +97,7 @@
#define init_elf_binfmt init_elf32_binfmt
#define jiffies_to_timeval jiffies_to_compat_timeval
-static __inline__ void
+static inline void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
@@ -113,21 +112,26 @@
#undef ELF_CORE_COPY_REGS
#define ELF_CORE_COPY_REGS(_dest,_regs) elf32_core_copy_regs(_dest,_regs);
-void elf32_core_copy_regs(elf_gregset_t _dest, struct pt_regs *_regs)
+void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
{
int i;
- memset(_dest, 0, sizeof(elf_gregset_t));
-
- /* XXXKW the 6 is from EF_REG0 in gdb/gdb/mips-linux-tdep.c, include/asm-mips/reg.h */
- for (i=6; i<38; i++)
- _dest[i] = (elf_greg_t) _regs->regs[i-6];
- _dest[i++] = (elf_greg_t) _regs->lo;
- _dest[i++] = (elf_greg_t) _regs->hi;
- _dest[i++] = (elf_greg_t) _regs->cp0_epc;
- _dest[i++] = (elf_greg_t) _regs->cp0_badvaddr;
- _dest[i++] = (elf_greg_t) _regs->cp0_status;
- _dest[i++] = (elf_greg_t) _regs->cp0_cause;
+ for (i = 0; i < EF_R0; i++)
+ grp[i] = 0;
+ grp[EF_R0] = 0;
+ for (i = 1; i <= 31; i++)
+ grp[EF_R0 + i] = (elf_greg_t) regs->regs[i];
+ grp[EF_R26] = 0;
+ grp[EF_R27] = 0;
+ grp[EF_LO] = (elf_greg_t) regs->lo;
+ grp[EF_HI] = (elf_greg_t) regs->hi;
+ grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
+ grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
+ grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
+ grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
+#ifdef EF_UNUSED0
+ grp[EF_UNUSED0] = 0;
+#endif
}
MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
@@ -136,4 +140,7 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
#include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 01117e9..374de83 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -12,6 +12,7 @@
#include <asm/branch.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
+#include <asm/fpu.h>
#include <asm/inst.h>
#include <asm/ptrace.h>
#include <asm/uaccess.h>
@@ -21,7 +22,7 @@
*/
int __compute_return_epc(struct pt_regs *regs)
{
- unsigned int *addr, bit, fcr31;
+ unsigned int *addr, bit, fcr31, dspcontrol;
long epc;
union mips_instruction insn;
@@ -98,6 +99,18 @@
epc += 8;
regs->cp0_epc = epc;
break;
+ case bposge32_op:
+ if (!cpu_has_dsp)
+ goto sigill;
+
+ dspcontrol = rddsp(0x01);
+
+ if (dspcontrol >= 32) {
+ epc = epc + 4 + (insn.i_format.simmediate << 2);
+ } else
+ epc += 8;
+ regs->cp0_epc = epc;
+ break;
}
break;
@@ -161,10 +174,13 @@
* And now the FPA/cp1 branch instructions.
*/
case cop1_op:
- if (!cpu_has_fpu)
- fcr31 = current->thread.fpu.soft.fcr31;
- else
+ preempt_disable();
+ if (is_fpu_owner())
asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+ else
+ fcr31 = current->thread.fpu.hard.fcr31;
+ preempt_enable();
+
bit = (insn.i_format.rt >> 2);
bit += (bit != 0);
bit += 23;
@@ -196,4 +212,9 @@
printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
force_sig(SIGBUS, current);
return -EFAULT;
+
+sigill:
+ printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
+ force_sig(SIGBUS, current);
+ return -EFAULT;
}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7685f8b..a263fb7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -2,9 +2,9 @@
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
* Copyright (C) 1994 - 2003 Ralf Baechle
- * Copyright (C) 2001 MIPS Inc.
+ * Copyright (C) 2001, 2004 MIPS Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/stddef.h>
-#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
@@ -51,36 +50,48 @@
".set\tmips0");
}
-/*
- * The Au1xxx wait is available only if we run CONFIG_PM and
- * the timer setup found we had a 32KHz counter available.
- * There are still problems with functions that may call au1k_wait
- * directly, but that will be discovered pretty quickly.
- */
-extern void (*au1k_wait_ptr)(void);
+/* The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter. */
+int allow_au1k_wait;
-void au1k_wait(void)
+static void au1k_wait(void)
{
-#ifdef CONFIG_PM
/* using the wait instruction makes CP0 counter unusable */
- __asm__(".set\tmips3\n\t"
+ __asm__(".set mips3\n\t"
+ "cache 0x14, 0(%0)\n\t"
+ "cache 0x14, 32(%0)\n\t"
+ "sync\n\t"
+ "nop\n\t"
"wait\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
- ".set\tmips0");
-#else
- __asm__("nop\n\t"
- "nop");
-#endif
+ ".set mips0\n\t"
+ : : "r" (au1k_wait));
}
+static int __initdata nowait = 0;
+
+int __init wait_disable(char *s)
+{
+ nowait = 1;
+
+ return 1;
+}
+
+__setup("nowait", wait_disable);
+
static inline void check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
printk("Checking for 'wait' instruction... ");
+ if (nowait) {
+ printk (" disabled.\n");
+ return;
+ }
+
switch (c->cputype) {
case CPU_R3081:
case CPU_R3081E:
@@ -109,22 +120,22 @@
/* case CPU_20KC:*/
case CPU_24K:
case CPU_25KF:
+ case CPU_34K:
+ case CPU_PR4450:
cpu_wait = r4k_wait;
printk(" available.\n");
break;
-#ifdef CONFIG_PM
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
- if (au1k_wait_ptr != NULL) {
- cpu_wait = au1k_wait_ptr;
+ case CPU_AU1550:
+ case CPU_AU1200:
+ if (allow_au1k_wait) {
+ cpu_wait = au1k_wait;
printk(" available.\n");
- }
- else {
+ } else
printk(" unavailable.\n");
- }
break;
-#endif
default:
printk(" unavailable.\n");
break;
@@ -180,7 +191,7 @@
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
}
-#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4KTLB \
+#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
@@ -189,7 +200,8 @@
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
@@ -203,7 +215,8 @@
else
c->cputype = CPU_R3000;
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
@@ -266,7 +279,8 @@
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
c->isa_level = MIPS_CPU_ISA_III;
- c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
+ c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
#if 0
@@ -285,7 +299,7 @@
#endif
case PRID_IMP_TX39:
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
c->cputype = CPU_TX3927;
@@ -421,74 +435,147 @@
}
}
-static inline void decode_config1(struct cpuinfo_mips *c)
+static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
- unsigned long config0 = read_c0_config();
- unsigned long config1;
+ unsigned int config0;
+ int isa;
- if ((config0 & (1 << 31)) == 0)
- return; /* actually wort a panic() */
+ config0 = read_c0_config();
- /* MIPS32 or MIPS64 compliant CPU. Read Config 1 register. */
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_4KTLB | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
- MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+ if (((config0 & MIPS_CONF_MT) >> 7) == 1)
+ c->options |= MIPS_CPU_TLB;
+ isa = (config0 & MIPS_CONF_AT) >> 13;
+ switch (isa) {
+ case 0:
+ c->isa_level = MIPS_CPU_ISA_M32;
+ break;
+ case 2:
+ c->isa_level = MIPS_CPU_ISA_M64;
+ break;
+ default:
+ panic("Unsupported ISA type, cp0.config0.at: %d.", isa);
+ }
+
+ return config0 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config1(struct cpuinfo_mips *c)
+{
+ unsigned int config1;
+
config1 = read_c0_config1();
- if (config1 & (1 << 3))
+
+ if (config1 & MIPS_CONF1_MD)
+ c->ases |= MIPS_ASE_MDMX;
+ if (config1 & MIPS_CONF1_WR)
c->options |= MIPS_CPU_WATCH;
- if (config1 & (1 << 2))
- c->options |= MIPS_CPU_MIPS16;
- if (config1 & (1 << 1))
+ if (config1 & MIPS_CONF1_CA)
+ c->ases |= MIPS_ASE_MIPS16;
+ if (config1 & MIPS_CONF1_EP)
c->options |= MIPS_CPU_EJTAG;
- if (config1 & 1) {
+ if (config1 & MIPS_CONF1_FP) {
c->options |= MIPS_CPU_FPU;
c->options |= MIPS_CPU_32FPR;
}
+ if (cpu_has_tlb)
+ c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+
+ return config1 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config2(struct cpuinfo_mips *c)
+{
+ unsigned int config2;
+
+ config2 = read_c0_config2();
+
+ if (config2 & MIPS_CONF2_SL)
+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+ return config2 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config3(struct cpuinfo_mips *c)
+{
+ unsigned int config3;
+
+ config3 = read_c0_config3();
+
+ if (config3 & MIPS_CONF3_SM)
+ c->ases |= MIPS_ASE_SMARTMIPS;
+ if (config3 & MIPS_CONF3_DSP)
+ c->ases |= MIPS_ASE_DSP;
+ if (config3 & MIPS_CONF3_VINT)
+ c->options |= MIPS_CPU_VINT;
+ if (config3 & MIPS_CONF3_VEIC)
+ c->options |= MIPS_CPU_VEIC;
+ if (config3 & MIPS_CONF3_MT)
+ c->ases |= MIPS_ASE_MIPSMT;
+
+ return config3 & MIPS_CONF_M;
+}
+
+static inline void decode_configs(struct cpuinfo_mips *c)
+{
+ /* MIPS32 or MIPS64 compliant CPU. */
+ c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+ MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
+ /* Read Config registers. */
+ if (!decode_config0(c))
+ return; /* actually worth a panic() */
+ if (!decode_config1(c))
+ return;
+ if (!decode_config2(c))
+ return;
+ if (!decode_config3(c))
+ return;
}
static inline void cpu_probe_mips(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
- c->isa_level = MIPS_CPU_ISA_M32;
break;
case PRID_IMP_4KEC:
c->cputype = CPU_4KEC;
- c->isa_level = MIPS_CPU_ISA_M32;
+ break;
+ case PRID_IMP_4KECR2:
+ c->cputype = CPU_4KEC;
break;
case PRID_IMP_4KSC:
+ case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
- c->isa_level = MIPS_CPU_ISA_M32;
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
- c->isa_level = MIPS_CPU_ISA_M64;
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
- c->isa_level = MIPS_CPU_ISA_M64;
break;
case PRID_IMP_24K:
+ case PRID_IMP_24KE:
c->cputype = CPU_24K;
- c->isa_level = MIPS_CPU_ISA_M32;
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
- c->isa_level = MIPS_CPU_ISA_M64;
/* Probe for L2 cache */
c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
break;
+ case PRID_IMP_34K:
+ c->cputype = CPU_34K;
+ c->isa_level = MIPS_CPU_ISA_M32;
+ break;
}
}
static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_AU1_REV1:
case PRID_IMP_AU1_REV2:
@@ -505,50 +592,70 @@
case 3:
c->cputype = CPU_AU1550;
break;
+ case 4:
+ c->cputype = CPU_AU1200;
+ break;
default:
panic("Unknown Au Core!");
break;
}
- c->isa_level = MIPS_CPU_ISA_M32;
break;
}
}
static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
+
+ /*
+ * For historical reasons the SB1 comes with it's own variant of
+ * cache code which eventually will be folded into c-r4k.c. Until
+ * then we pretend it's got it's own cache architecture.
+ */
+ c->options &= ~MIPS_CPU_4K_CACHE;
+ c->options |= MIPS_CPU_SB1_CACHE;
+
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
- c->isa_level = MIPS_CPU_ISA_M64;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
- MIPS_CPU_MCHECK | MIPS_CPU_EJTAG |
- MIPS_CPU_WATCH | MIPS_CPU_LLSC;
-#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
+#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
/* FPU in pass1 is known to have issues. */
- c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
+ c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
#endif
break;
+ case PRID_IMP_SB1A:
+ c->cputype = CPU_SB1A;
+ break;
}
}
static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
- c->isa_level = MIPS_CPU_ISA_M64;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_4KTLB | MIPS_CPU_FPU |
- MIPS_CPU_COUNTER | MIPS_CPU_MCHECK;
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
+static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_PR4450:
+ c->cputype = CPU_PR4450;
+ c->isa_level = MIPS_CPU_ISA_M32;
+ break;
+ default:
+ panic("Unknown Philips Core!"); /* REVISIT: die? */
+ break;
+ }
+}
+
+
__init void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
@@ -571,15 +678,24 @@
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c);
break;
-
case PRID_COMP_SANDCRAFT:
cpu_probe_sandcraft(c);
break;
+ case PRID_COMP_PHILIPS:
+ cpu_probe_philips(c);
+ break;
default:
c->cputype = CPU_UNKNOWN;
}
- if (c->options & MIPS_CPU_FPU)
+ if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
+
+ if (c->isa_level == MIPS_CPU_ISA_M32 ||
+ c->isa_level == MIPS_CPU_ISA_M64) {
+ if (c->fpu_id & MIPS_FPIR_3D)
+ c->ases |= MIPS_ASE_MIPS3D;
+ }
+ }
}
__init void cpu_report(void)
diff --git a/arch/mips/kernel/dma-no-isa.c b/arch/mips/kernel/dma-no-isa.c
new file mode 100644
index 0000000..6df8b07
--- /dev/null
+++ b/arch/mips/kernel/dma-no-isa.c
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * Dummy ISA DMA functions for systems that don't have ISA but share drivers
+ * with ISA such as legacy free PCI.
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(dma_spin_lock);
+
+int request_dma(unsigned int dmanr, const char * device_id)
+{
+ return -EINVAL;
+}
+
+void free_dma(unsigned int dmanr)
+{
+}
+
+EXPORT_SYMBOL(dma_spin_lock);
+EXPORT_SYMBOL(request_dma);
+EXPORT_SYMBOL(free_dma);
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 5eb4291..83c87fe 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -19,11 +19,11 @@
#include <asm/war.h>
#ifdef CONFIG_PREEMPT
- .macro preempt_stop reg=t0
+ .macro preempt_stop
.endm
#else
- .macro preempt_stop reg=t0
- local_irq_disable \reg
+ .macro preempt_stop
+ local_irq_disable
.endm
#define resume_kernel restore_all
#endif
@@ -37,17 +37,18 @@
andi t0, t0, KU_USER
beqz t0, resume_kernel
-FEXPORT(resume_userspace)
- local_irq_disable t0 # make sure we dont miss an
+resume_userspace:
+ local_irq_disable # make sure we dont miss an
# interrupt setting need_resched
# between sampling and return
LONG_L a2, TI_FLAGS($28) # current->work
- andi a2, _TIF_WORK_MASK # (ignoring syscall_trace)
- bnez a2, work_pending
+ andi t0, a2, _TIF_WORK_MASK # (ignoring syscall_trace)
+ bnez t0, work_pending
j restore_all
#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
+resume_kernel:
+ local_irq_disable
lw t0, TI_PRE_COUNT($28)
bnez t0, restore_all
need_resched:
@@ -57,12 +58,7 @@
LONG_L t0, PT_STATUS(sp) # Interrupts off?
andi t0, 1
beqz t0, restore_all
- li t0, PREEMPT_ACTIVE
- sw t0, TI_PRE_COUNT($28)
- local_irq_enable t0
- jal schedule
- sw zero, TI_PRE_COUNT($28)
- local_irq_disable t0
+ jal preempt_schedule_irq
b need_resched
#endif
@@ -88,13 +84,13 @@
RESTORE_SP_AND_RET
.set at
-FEXPORT(work_pending)
- andi t0, a2, _TIF_NEED_RESCHED
+work_pending:
+ andi t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
beqz t0, work_notifysig
work_resched:
jal schedule
- local_irq_disable t0 # make sure need_resched and
+ local_irq_disable # make sure need_resched and
# signals dont change between
# sampling and return
LONG_L a2, TI_FLAGS($28)
@@ -109,15 +105,14 @@
move a0, sp
li a1, 0
jal do_notify_resume # a2 already loaded
- j restore_all
+ j resume_userspace
FEXPORT(syscall_exit_work_partial)
SAVE_STATIC
-FEXPORT(syscall_exit_work)
- LONG_L t0, TI_FLAGS($28)
- li t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
- and t0, t1
- beqz t0, work_pending # trace bit is set
+syscall_exit_work:
+ li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+ and t0, a2 # a2 is preloaded with TI_FLAGS
+ beqz t0, work_pending # trace bit set?
local_irq_enable # could let do_syscall_trace()
# call schedule() instead
move a0, sp
@@ -128,28 +123,25 @@
/*
* Common spurious interrupt handler.
*/
- .text
- .align 5
LEAF(spurious_interrupt)
/*
* Someone tried to fool us by sending an interrupt but we
* couldn't find a cause for it.
*/
+ PTR_LA t1, irq_err_count
#ifdef CONFIG_SMP
- lui t1, %hi(irq_err_count)
-1: ll t0, %lo(irq_err_count)(t1)
+1: ll t0, (t1)
addiu t0, 1
- sc t0, %lo(irq_err_count)(t1)
+ sc t0, (t1)
#if R10000_LLSC_WAR
beqzl t0, 1b
#else
beqz t0, 1b
#endif
#else
- lui t1, %hi(irq_err_count)
- lw t0, %lo(irq_err_count)(t1)
+ lw t0, (t1)
addiu t0, 1
- sw t0, %lo(irq_err_count)(t1)
+ sw t0, (t1)
#endif
j ret_from_irq
END(spurious_interrupt)
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 512bedb..83b8986 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -52,16 +52,15 @@
/*
* Called from user mode, go somewhere else.
*/
- lui k1, %hi(saved_vectors)
mfc0 k0, CP0_CAUSE
andi k0, k0, 0x7c
add k1, k1, k0
- lw k0, %lo(saved_vectors)(k1)
+ PTR_L k0, saved_vectors(k1)
jr k0
nop
1:
move k0, sp
- subu sp, k1, GDB_FR_SIZE*2 # see comment above
+ PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above
LONG_S k0, GDB_FR_REG29(sp)
LONG_S $2, GDB_FR_REG2(sp)
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index d3fd1ab..96d18c4 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -176,8 +176,10 @@
/*
* spin locks for smp case
*/
-static spinlock_t kgdb_lock = SPIN_LOCK_UNLOCKED;
-static spinlock_t kgdb_cpulock[NR_CPUS] = { [0 ... NR_CPUS-1] = SPIN_LOCK_UNLOCKED};
+static DEFINE_SPINLOCK(kgdb_lock);
+static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
+ [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED;
+};
/*
* BUFMAX defines the maximum number of characters in inbound/outbound buffers
@@ -637,29 +639,32 @@
* and only one can be active at a time.
*/
extern spinlock_t smp_call_lock;
+
void set_async_breakpoint(unsigned long *epc)
{
/* skip breaking into userland */
if ((*epc & 0x80000000) == 0)
return;
+#ifdef CONFIG_SMP
/* avoid deadlock if someone is make IPC */
if (spin_is_locked(&smp_call_lock))
return;
+#endif
async_bp.addr = *epc;
*epc = (unsigned long)async_breakpoint;
}
-void kgdb_wait(void *arg)
+static void kgdb_wait(void *arg)
{
unsigned flags;
int cpu = smp_processor_id();
local_irq_save(flags);
- spin_lock(&kgdb_cpulock[cpu]);
- spin_unlock(&kgdb_cpulock[cpu]);
+ __raw_spin_lock(&kgdb_cpulock[cpu]);
+ __raw_spin_unlock(&kgdb_cpulock[cpu]);
local_irq_restore(flags);
}
@@ -707,7 +712,7 @@
* acquire the CPU spinlocks
*/
for (i = num_online_cpus()-1; i >= 0; i--)
- if (spin_trylock(&kgdb_cpulock[i]) == 0)
+ if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
panic("kgdb: couldn't get cpulock %d\n", i);
/*
@@ -982,7 +987,7 @@
exit_kgdb_exception:
/* release locks so other CPUs can go */
for (i = num_online_cpus()-1; i >= 0; i--)
- spin_unlock(&kgdb_cpulock[i]);
+ __raw_spin_unlock(&kgdb_cpulock[i]);
spin_unlock(&kgdb_lock);
__flush_cache_all();
@@ -1036,12 +1041,12 @@
* malloc is needed by gdb client in "call func()", even a private one
* will make gdb happy
*/
-static void *malloc(size_t size)
+static void * __attribute_used__ malloc(size_t size)
{
return kmalloc(size, GFP_ATOMIC);
}
-static void free(void *where)
+static void __attribute_used__ free (void *where)
{
kfree(where);
}
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index e7f6c1b..aa18a8b 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -82,7 +82,7 @@
li k0, 14<<2
beq k1, k0, handle_vcei
#ifdef CONFIG_64BIT
- dsll k1, k1, 1
+ dsll k1, k1, 1
#endif
.set pop
PTR_L k0, exception_handlers(k1)
@@ -90,17 +90,17 @@
/*
* Big shit, we now may have two dirty primary cache lines for the same
- * physical address. We can savely invalidate the line pointed to by
+ * physical address. We can safely invalidate the line pointed to by
* c0_badvaddr because after return from this exception handler the
* load / store will be re-executed.
*/
handle_vced:
- DMFC0 k0, CP0_BADVADDR
+ MFC0 k0, CP0_BADVADDR
li k1, -4 # Is this ...
and k0, k1 # ... really needed?
mtc0 zero, CP0_TAGLO
- cache Index_Store_Tag_D,(k0)
- cache Hit_Writeback_Inv_SD,(k0)
+ cache Index_Store_Tag_D, (k0)
+ cache Hit_Writeback_Inv_SD, (k0)
#ifdef CONFIG_PROC_FS
PTR_LA k0, vced_count
lw k1, (k0)
@@ -148,6 +148,38 @@
__FINIT
/*
+ * Vectored interrupt handler.
+ * This prototype is copied to ebase + n*IntCtl.VS and patched
+ * to invoke the handler
+ */
+NESTED(except_vec_vi, 0, sp)
+ SAVE_SOME
+ SAVE_AT
+ .set push
+ .set noreorder
+EXPORT(except_vec_vi_lui)
+ lui v0, 0 /* Patched */
+ j except_vec_vi_handler
+EXPORT(except_vec_vi_ori)
+ ori v0, 0 /* Patched */
+ .set pop
+ END(except_vec_vi)
+EXPORT(except_vec_vi_end)
+
+/*
+ * Common Vectored Interrupt code
+ * Complete the register saves and invoke the handler which is passed in $v0
+ */
+NESTED(except_vec_vi_handler, 0, sp)
+ SAVE_TEMP
+ SAVE_STATIC
+ CLI
+ move a0, sp
+ jalr v0
+ j ret_from_irq
+ END(except_vec_vi_handler)
+
+/*
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
@@ -291,6 +323,8 @@
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
BUILD_HANDLER watch watch sti verbose /* #23 */
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
+ BUILD_HANDLER mt mt sti verbose /* #25 */
+ BUILD_HANDLER dsp dsp sti silent /* #26 */
BUILD_HANDLER reserved reserved sti verbose /* others */
#ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/genrtc.c b/arch/mips/kernel/genrtc.c
deleted file mode 100644
index 71416e7..0000000
--- a/arch/mips/kernel/genrtc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * A glue layer that provides RTC read/write to drivers/char/genrtc.c driver
- * based on MIPS internal RTC routines. It does take care locking
- * issues so that we are SMP/Preemption safe.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Please read the COPYING file for all license details.
- */
-
-#include <linux/spinlock.h>
-
-#include <asm/rtc.h>
-#include <asm/time.h>
-
-static DEFINE_SPINLOCK(mips_rtc_lock);
-
-unsigned int get_rtc_time(struct rtc_time *time)
-{
- unsigned long nowtime;
-
- spin_lock(&mips_rtc_lock);
- nowtime = rtc_get_time();
- to_tm(nowtime, time);
- time->tm_year -= 1900;
- spin_unlock(&mips_rtc_lock);
-
- return RTC_24H;
-}
-
-int set_rtc_time(struct rtc_time *time)
-{
- unsigned long nowtime;
- int ret;
-
- spin_lock(&mips_rtc_lock);
- nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
- time->tm_mday, time->tm_hour, time->tm_min,
- time->tm_sec);
- ret = rtc_set_time(nowtime);
- spin_unlock(&mips_rtc_lock);
-
- return ret;
-}
-
-unsigned int get_rtc_ss(void)
-{
- struct rtc_time h;
-
- get_rtc_time(&h);
- return h.tm_sec;
-}
-
-int get_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
-int set_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 2a1b45d..2e9122a 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,11 +22,8 @@
#include <asm/page.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
-#ifdef CONFIG_SGI_IP27
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/klkernvars.h>
-#endif
+
+#include <kernel-entry-init.h>
.macro ARC64_TWIDDLE_PC
#if defined(CONFIG_ARC64) || defined(CONFIG_MAPPED_KERNEL)
@@ -38,18 +35,6 @@
#endif
.endm
-#ifdef CONFIG_SGI_IP27
- /*
- * outputs the local nasid into res. IP27 stuff.
- */
- .macro GET_NASID_ASM res
- dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
- ld \res, (\res)
- and \res, NSRI_NODEID_MASK
- dsrl \res, NSRI_NODEID_SHFT
- .endm
-#endif /* CONFIG_SGI_IP27 */
-
/*
* inputs are the text nasid in t1, data nasid in t2.
*/
@@ -131,16 +116,21 @@
EXPORT(stext) # used for profiling
EXPORT(_stext)
+#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM)
+ /*
+ * Give us a fighting chance of running if execution beings at the
+ * kernel load address. This is needed because this platform does
+ * not have a ELF loader yet.
+ */
+ j kernel_entry
+#endif
__INIT
NESTED(kernel_entry, 16, sp) # kernel entry point
- setup_c0_status_pri
-#ifdef CONFIG_SGI_IP27
- GET_NASID_ASM t1
- move t2, t1 # text and data are here
- MAPPED_KERNEL_SETUP_TLB
-#endif /* IP27 */
+ kernel_entry_setup # cpu specific setup
+
+ setup_c0_status_pri
ARC64_TWIDDLE_PC
@@ -157,6 +147,7 @@
LONG_S a2, fw_arg2
LONG_S a3, fw_arg3
+ MTC0 zero, CP0_CONTEXT # clear context register
PTR_LA $28, init_thread_union
PTR_ADDIU sp, $28, _THREAD_SIZE - 32
set_saved_sp sp, t0, t1
@@ -165,6 +156,10 @@
j start_kernel
END(kernel_entry)
+#ifdef CONFIG_QEMU
+ __INIT
+#endif
+
#ifdef CONFIG_SMP
/*
* SMP slave cpus entry point. Board specific code for bootstrap calls this
@@ -172,20 +167,7 @@
*/
NESTED(smp_bootstrap, 16, sp)
setup_c0_status_sec
-
-#ifdef CONFIG_SGI_IP27
- GET_NASID_ASM t1
- dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
- KLDIR_OFF_POINTER + CAC_BASE
- dsll t1, NASID_SHFT
- or t0, t0, t1
- ld t0, 0(t0) # t0 points to kern_vars struct
- lh t1, KV_RO_NASID_OFFSET(t0)
- lh t2, KV_RW_NASID_OFFSET(t0)
- MAPPED_KERNEL_SETUP_TLB
- ARC64_TWIDDLE_PC
-#endif /* CONFIG_SGI_IP27 */
-
+ smp_slave_setup
j start_secondary
END(smp_bootstrap)
#endif /* CONFIG_SMP */
@@ -200,19 +182,13 @@
.comm fw_arg2, SZREG, SZREG
.comm fw_arg3, SZREG, SZREG
- .macro page name, order=0
- .globl \name
-\name: .size \name, (_PAGE_SIZE << \order)
- .org . + (_PAGE_SIZE << \order)
- .type \name, @object
+ .macro page name, order
+ .comm \name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order)
.endm
- .data
- .align PAGE_SHIFT
-
/*
- * ... but on 64-bit we've got three-level pagetables with a
- * slightly different layout ...
+ * On 64-bit we've got three-level pagetables with a slightly
+ * different layout ...
*/
page swapper_pg_dir, _PGD_ORDER
#ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 4477592..b974ac9 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -31,7 +31,7 @@
* moves to arch independent land
*/
-spinlock_t DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_SPINLOCK(i8259A_lock);
static void end_8259A_irq (unsigned int irq)
{
@@ -52,14 +52,13 @@
}
static struct hw_interrupt_type i8259A_irq_type = {
- "XT-PIC",
- startup_8259A_irq,
- shutdown_8259A_irq,
- enable_8259A_irq,
- disable_8259A_irq,
- mask_and_ack_8259A,
- end_8259A_irq,
- NULL
+ .typename = "XT-PIC",
+ .startup = startup_8259A_irq,
+ .shutdown = shutdown_8259A_irq,
+ .enable = enable_8259A_irq,
+ .disable = disable_8259A_irq,
+ .ack = mask_and_ack_8259A,
+ .end = end_8259A_irq,
};
/*
@@ -308,7 +307,7 @@
/*
* On systems with i8259-style interrupt controllers we assume for
- * driver compatibility reasons interrupts 0 - 15 to be the i8295
+ * driver compatibility reasons interrupts 0 - 15 to be the i8259
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init init_i8259_irqs (void)
@@ -322,7 +321,7 @@
for (i = 0; i < 16; i++) {
irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
+ irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].handler = &i8259A_irq_type;
}
diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c
index c069719..ed9b2da 100644
--- a/arch/mips/kernel/ioctl32.c
+++ b/arch/mips/kernel/ioctl32.c
@@ -41,12 +41,6 @@
#define DECLARES
#include "compat_ioctl.c"
-#ifdef CONFIG_SIBYTE_TBPROF
-COMPATIBLE_IOCTL(SBPROF_ZBSTART)
-COMPATIBLE_IOCTL(SBPROF_ZBSTOP)
-COMPATIBLE_IOCTL(SBPROF_ZBWAITFULL)
-#endif /* CONFIG_SIBYTE_TBPROF */
-
/*HANDLE_IOCTL(RTC_IRQP_READ, w_long)
COMPATIBLE_IOCTL(RTC_IRQP_SET)
HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 4af20cd..99262fe 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -8,7 +8,7 @@
*
* Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
* Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
+ * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
*/
#include <linux/module.h>
#include <linux/fs.h>
@@ -31,15 +31,16 @@
#include <linux/elfcore.h>
#include <linux/smp_lock.h>
-#include <asm/uaccess.h>
#include <asm/mipsregs.h>
+#include <asm/namei.h>
#include <asm/prctl.h>
+#include <asm/uaccess.h>
#define DLINFO_ITEMS 12
#include <linux/elf.h>
-#undef DEBUG_ELF
+#undef DEBUG
static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
static int load_irix_library(struct file *);
@@ -55,7 +56,7 @@
#define elf_addr_t unsigned long
#endif
-#ifdef DEBUG_ELF
+#ifdef DEBUG
/* Debugging routines. */
static char *get_elf_p_type(Elf32_Word p_type)
{
@@ -120,7 +121,7 @@
print_phdr(i, ep);
}
}
-#endif /* (DEBUG_ELF) */
+#endif /* DEBUG */
static void set_brk(unsigned long start, unsigned long end)
{
@@ -146,20 +147,20 @@
nbyte = elf_bss & (PAGE_SIZE-1);
if (nbyte) {
nbyte = PAGE_SIZE - nbyte;
- clear_user((void *) elf_bss, nbyte);
+ clear_user((void __user *) elf_bss, nbyte);
}
}
-unsigned long * create_irix_tables(char * p, int argc, int envc,
- struct elfhdr * exec, unsigned int load_addr,
- unsigned int interp_load_addr,
- struct pt_regs *regs, struct elf_phdr *ephdr)
+static unsigned long * create_irix_tables(char * p, int argc, int envc,
+ struct elfhdr * exec, unsigned int load_addr,
+ unsigned int interp_load_addr, struct pt_regs *regs,
+ struct elf_phdr *ephdr)
{
elf_addr_t *argv;
elf_addr_t *envp;
elf_addr_t *sp, *csp;
-#ifdef DEBUG_ELF
+#ifdef DEBUG
printk("create_irix_tables: p[%p] argc[%d] envc[%d] "
"load_addr[%08x] interp_load_addr[%08x]\n",
p, argc, envc, load_addr, interp_load_addr);
@@ -248,14 +249,13 @@
last_bss = 0;
error = load_addr = 0;
-#ifdef DEBUG_ELF
+#ifdef DEBUG
print_elfhdr(interp_elf_ex);
#endif
/* First of all, some simple consistency checks */
if ((interp_elf_ex->e_type != ET_EXEC &&
interp_elf_ex->e_type != ET_DYN) ||
- !irix_elf_check_arch(interp_elf_ex) ||
!interpreter->f_op->mmap) {
printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
return 0xffffffff;
@@ -290,7 +290,7 @@
(char *) elf_phdata,
sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
-#ifdef DEBUG_ELF
+#ifdef DEBUG
dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
#endif
@@ -306,13 +306,11 @@
elf_type |= MAP_FIXED;
vaddr = eppnt->p_vaddr;
-#ifdef DEBUG_ELF
- printk("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
+ pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
interpreter, vaddr,
(unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
(unsigned long) elf_prot, (unsigned long) elf_type,
(unsigned long) (eppnt->p_offset & 0xfffff000));
-#endif
down_write(¤t->mm->mmap_sem);
error = do_mmap(interpreter, vaddr,
eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
@@ -324,14 +322,10 @@
printk("Aieee IRIX interp mmap error=%d\n", error);
break; /* Real error */
}
-#ifdef DEBUG_ELF
- printk("error=%08lx ", (unsigned long) error);
-#endif
+ pr_debug("error=%08lx ", (unsigned long) error);
if(!load_addr && interp_elf_ex->e_type == ET_DYN) {
load_addr = error;
-#ifdef DEBUG_ELF
- printk("load_addr = error ");
-#endif
+ pr_debug("load_addr = error ");
}
/* Find the end of the file mapping for this phdr, and keep
@@ -345,17 +339,13 @@
*/
k = eppnt->p_memsz + eppnt->p_vaddr;
if(k > last_bss) last_bss = k;
-#ifdef DEBUG_ELF
- printk("\n");
-#endif
+ pr_debug("\n");
}
}
/* Now use mmap to map the library into memory. */
if(error < 0 && error > -1024) {
-#ifdef DEBUG_ELF
- printk("got error %d\n", error);
-#endif
+ pr_debug("got error %d\n", error);
kfree(elf_phdata);
return 0xffffffff;
}
@@ -365,16 +355,12 @@
* that there are zero-mapped pages up to and including the
* last bss page.
*/
-#ifdef DEBUG_ELF
- printk("padzero(%08lx) ", (unsigned long) (elf_bss));
-#endif
+ pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
padzero(elf_bss);
len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
-#ifdef DEBUG_ELF
- printk("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
- (unsigned long) len);
-#endif
+ pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
+ (unsigned long) len);
/* Map the last of the bss segment */
if (last_bss > len) {
@@ -396,12 +382,7 @@
/* First of all, some simple consistency checks */
if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
- !irix_elf_check_arch(ehp) || !bprm->file->f_op->mmap) {
- return -ENOEXEC;
- }
-
- /* Only support MIPS ARCH2 or greater IRIX binaries for now. */
- if(!(ehp->e_flags & EF_MIPS_ARCH) && !(ehp->e_flags & 0x04)) {
+ !bprm->file->f_op->mmap) {
return -ENOEXEC;
}
@@ -411,16 +392,17 @@
* XXX all registers as 64bits on cpu's capable of this at
* XXX exception time plus frob the XTLB exception vector.
*/
- if((ehp->e_flags & 0x20)) {
+ if((ehp->e_flags & EF_MIPS_ABI2))
return -ENOEXEC;
- }
- return 0; /* It's ok. */
+ return 0;
}
-#define IRIX_INTERP_PREFIX "/usr/gnemul/irix"
-
-/* Look for an IRIX ELF interpreter. */
+/*
+ * This is where the detailed check is performed. Irix binaries
+ * use interpreters with 'libc.so' in the name, so this function
+ * can differentiate between Linux and Irix binaries.
+ */
static inline int look_for_irix_interpreter(char **name,
struct file **interpreter,
struct elfhdr *interp_elf_ex,
@@ -440,12 +422,11 @@
if (*name != NULL)
goto out;
- *name = kmalloc((epp->p_filesz + strlen(IRIX_INTERP_PREFIX)),
- GFP_KERNEL);
+ *name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
if (!*name)
return -ENOMEM;
- strcpy(*name, IRIX_INTERP_PREFIX);
+ strcpy(*name, IRIX_EMUL);
retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
epp->p_filesz);
if (retval < 0)
@@ -562,7 +543,7 @@
* process and the system, here we map the page and fill the
* structure
*/
-void irix_map_prda_page (void)
+static void irix_map_prda_page(void)
{
unsigned long v;
struct prda *pp;
@@ -601,14 +582,33 @@
load_addr = 0;
has_interp = has_ephdr = 0;
- elf_ihdr = elf_ephdr = 0;
+ elf_ihdr = elf_ephdr = NULL;
elf_ex = *((struct elfhdr *) bprm->buf);
retval = -ENOEXEC;
if (verify_binary(&elf_ex, bprm))
goto out;
-#ifdef DEBUG_ELF
+ /*
+ * Telling -o32 static binaries from Linux and Irix apart from each
+ * other is difficult. There are 2 differences to be noted for static
+ * binaries from the 2 operating systems:
+ *
+ * 1) Irix binaries have their .text section before their .init
+ * section. Linux binaries are just the opposite.
+ *
+ * 2) Irix binaries usually have <= 12 sections and Linux
+ * binaries have > 20.
+ *
+ * We will use Method #2 since Method #1 would require us to read in
+ * the section headers which is way too much overhead. This appears
+ * to work for everything we have ran into so far. If anyone has a
+ * better method to tell the binaries apart, I'm listening.
+ */
+ if (elf_ex.e_shnum > 20)
+ goto out;
+
+#ifdef DEBUG
print_elfhdr(&elf_ex);
#endif
@@ -623,11 +623,10 @@
}
retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-
if (retval < 0)
goto out_free_ph;
-#ifdef DEBUG_ELF
+#ifdef DEBUG
dump_phdrs(elf_phdata, elf_ex.e_phnum);
#endif
@@ -644,9 +643,8 @@
break;
};
}
-#ifdef DEBUG_ELF
- printk("\n");
-#endif
+
+ pr_debug("\n");
elf_bss = 0;
elf_brk = 0;
@@ -657,12 +655,19 @@
end_code = 0;
end_data = 0;
- retval = look_for_irix_interpreter(&elf_interpreter,
- &interpreter,
+ /*
+ * If we get a return value, we change the value to be ENOEXEC
+ * so that we can exit gracefully and the main binary format
+ * search loop in 'fs/exec.c' will move onto the next handler
+ * which should be the normal ELF binary handler.
+ */
+ retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
&interp_elf_ex, elf_phdata, bprm,
elf_ex.e_phnum);
- if (retval)
+ if (retval) {
+ retval = -ENOEXEC;
goto out_free_file;
+ }
if (elf_interpreter) {
retval = verify_irix_interpreter(&interp_elf_ex);
@@ -746,18 +751,16 @@
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
- irix_map_prda_page ();
+ irix_map_prda_page();
padzero(elf_bss);
-#ifdef DEBUG_ELF
- printk("(start_brk) %lx\n" , (long) current->mm->start_brk);
- printk("(end_code) %lx\n" , (long) current->mm->end_code);
- printk("(start_code) %lx\n" , (long) current->mm->start_code);
- printk("(end_data) %lx\n" , (long) current->mm->end_data);
- printk("(start_stack) %lx\n" , (long) current->mm->start_stack);
- printk("(brk) %lx\n" , (long) current->mm->brk);
-#endif
+ pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
+ pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
+ pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
+ pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
+ pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
+ pr_debug("(brk) %lx\n" , (long) current->mm->brk);
#if 0 /* XXX No fucking way dude... */
/* Why this, you ask??? Well SVr4 maps page 0 as read-only,
@@ -782,8 +785,7 @@
allow_write_access(interpreter);
fput(interpreter);
out_free_interp:
- if (elf_interpreter)
- kfree(elf_interpreter);
+ kfree(elf_interpreter);
out_free_file:
out_free_ph:
kfree (elf_phdata);
@@ -813,7 +815,7 @@
/* First of all, some simple consistency checks. */
if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
- !irix_elf_check_arch(&elf_ex) || !file->f_op->mmap)
+ !file->f_op->mmap)
return -ENOEXEC;
/* Now read in all of the header information. */
@@ -874,35 +876,36 @@
* phdrs there are in the USER_PHDRP array. We return the vaddr the
* first phdr was successfully mapped to.
*/
-unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
+unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
{
- struct elf_phdr *hp;
+ unsigned long type, vaddr, filesz, offset, flags;
+ struct elf_phdr __user *hp;
struct file *filp;
int i, retval;
-#ifdef DEBUG_ELF
- printk("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
- fd, user_phdrp, cnt);
-#endif
+ pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
+ fd, user_phdrp, cnt);
/* First get the verification out of the way. */
hp = user_phdrp;
if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-#ifdef DEBUG_ELF
- printk("irix_mapelf: access_ok fails!\n");
-#endif
+ pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
+
return -EFAULT;
}
-#ifdef DEBUG_ELF
+#ifdef DEBUG
dump_phdrs(user_phdrp, cnt);
#endif
- for(i = 0; i < cnt; i++, hp++)
- if(hp->p_type != PT_LOAD) {
+ for (i = 0; i < cnt; i++, hp++) {
+ if (__get_user(type, &hp->p_type))
+ return -EFAULT;
+ if (type != PT_LOAD) {
printk("irix_mapelf: One section is not PT_LOAD!\n");
return -ENOEXEC;
}
+ }
filp = fget(fd);
if (!filp)
@@ -917,29 +920,40 @@
for(i = 0; i < cnt; i++, hp++) {
int prot;
- prot = (hp->p_flags & PF_R) ? PROT_READ : 0;
- prot |= (hp->p_flags & PF_W) ? PROT_WRITE : 0;
- prot |= (hp->p_flags & PF_X) ? PROT_EXEC : 0;
+ retval = __get_user(vaddr, &hp->p_vaddr);
+ retval |= __get_user(filesz, &hp->p_filesz);
+ retval |= __get_user(offset, &hp->p_offset);
+ retval |= __get_user(flags, &hp->p_flags);
+ if (retval)
+ return retval;
+
+ prot = (flags & PF_R) ? PROT_READ : 0;
+ prot |= (flags & PF_W) ? PROT_WRITE : 0;
+ prot |= (flags & PF_X) ? PROT_EXEC : 0;
+
down_write(¤t->mm->mmap_sem);
- retval = do_mmap(filp, (hp->p_vaddr & 0xfffff000),
- (hp->p_filesz + (hp->p_vaddr & 0xfff)),
+ retval = do_mmap(filp, (vaddr & 0xfffff000),
+ (filesz + (vaddr & 0xfff)),
prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
- (hp->p_offset & 0xfffff000));
+ (offset & 0xfffff000));
up_write(¤t->mm->mmap_sem);
- if(retval != (hp->p_vaddr & 0xfffff000)) {
+ if (retval != (vaddr & 0xfffff000)) {
printk("irix_mapelf: do_mmap fails with %d!\n", retval);
fput(filp);
return retval;
}
}
-#ifdef DEBUG_ELF
- printk("irix_mapelf: Success, returning %08lx\n",
- (unsigned long) user_phdrp->p_vaddr);
-#endif
+ pr_debug("irix_mapelf: Success, returning %08lx\n",
+ (unsigned long) user_phdrp->p_vaddr);
+
fput(filp);
- return user_phdrp->p_vaddr;
+
+ if (__get_user(vaddr, &user_phdrp->p_vaddr))
+ return -EFAULT;
+
+ return vaddr;
}
/*
@@ -952,9 +966,9 @@
/* These are the only things you should do on a core-file: use only these
* functions to write out all the necessary info.
*/
-static int dump_write(struct file *file, const void *addr, int nr)
+static int dump_write(struct file *file, const void __user *addr, int nr)
{
- return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+ return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
}
static int dump_seek(struct file *file, off_t off)
@@ -1073,7 +1087,7 @@
/* Count what's needed to dump, up to the limit of coredump size. */
segs = 0;
size = 0;
- for(vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
+ for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
if (maydump(vma))
{
int sz = vma->vm_end-vma->vm_start;
@@ -1187,9 +1201,9 @@
len = current->mm->arg_end - current->mm->arg_start;
len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
- copy_from_user(&psinfo.pr_psargs,
- (const char *)current->mm->arg_start, len);
- for(i = 0; i < len; i++)
+ (void *) copy_from_user(&psinfo.pr_psargs,
+ (const char __user *)current->mm->arg_start, len);
+ for (i = 0; i < len; i++)
if (psinfo.pr_psargs[i] == 0)
psinfo.pr_psargs[i] = ' ';
psinfo.pr_psargs[len] = 0;
@@ -1256,8 +1270,10 @@
phdr.p_memsz = sz;
offset += phdr.p_filesz;
phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
- if (vma->vm_flags & VM_WRITE) phdr.p_flags |= PF_W;
- if (vma->vm_flags & VM_EXEC) phdr.p_flags |= PF_X;
+ if (vma->vm_flags & VM_WRITE)
+ phdr.p_flags |= PF_W;
+ if (vma->vm_flags & VM_EXEC)
+ phdr.p_flags |= PF_X;
phdr.p_align = PAGE_SIZE;
DUMP_WRITE(&phdr, sizeof(phdr));
@@ -1283,7 +1299,7 @@
#ifdef DEBUG
printk("elf_core_dump: writing %08lx %lx\n", addr, len);
#endif
- DUMP_WRITE((void *)addr, len);
+ DUMP_WRITE((void __user *)addr, len);
}
if ((off_t) file->f_pos != offset) {
@@ -1299,7 +1315,7 @@
static int __init init_irix_binfmt(void)
{
- int init_inventory(void);
+ extern int init_inventory(void);
extern asmlinkage unsigned long sys_call_table;
extern asmlinkage unsigned long sys_call_table_irix5;
@@ -1318,7 +1334,9 @@
static void __exit exit_irix_binfmt(void)
{
- /* Remove the IRIX ELF loaders. */
+ /*
+ * Remove the Irix ELF loader.
+ */
unregister_binfmt(&irix_format);
}
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
index 60aa98c..de8584f6 100644
--- a/arch/mips/kernel/irixinv.c
+++ b/arch/mips/kernel/irixinv.c
@@ -30,10 +30,10 @@
inventory_items++;
}
-int dump_inventory_to_user (void *userbuf, int size)
+int dump_inventory_to_user (void __user *userbuf, int size)
{
inventory_t *inv = &inventory [0];
- inventory_t *user = userbuf;
+ inventory_t __user *user = userbuf;
int v;
if (!access_ok(VERIFY_WRITE, userbuf, size))
@@ -41,7 +41,8 @@
for (v = 0; v < inventory_items; v++){
inv = &inventory [v];
- copy_to_user (user, inv, sizeof (inventory_t));
+ if (copy_to_user (user, inv, sizeof (inventory_t)))
+ return -EFAULT;
user++;
}
return inventory_items * sizeof (inventory_t);
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
index 3cdc223..e286382 100644
--- a/arch/mips/kernel/irixioctl.c
+++ b/arch/mips/kernel/irixioctl.c
@@ -59,7 +59,7 @@
{
struct tty_struct *tp, *rtp;
mm_segment_t old_fs;
- int error = 0;
+ int i, error = 0;
#ifdef DEBUG_IOCTLS
printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
@@ -74,12 +74,13 @@
case 0x0000540d: {
struct termios kt;
- struct irix_termios *it = (struct irix_termios *) arg;
+ struct irix_termios __user *it =
+ (struct irix_termios __user *) arg;
#ifdef DEBUG_IOCTLS
printk("TCGETS, %08lx) ", arg);
#endif
- if(!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
+ if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
error = -EFAULT;
break;
}
@@ -88,13 +89,14 @@
set_fs(old_fs);
if (error)
break;
- __put_user(kt.c_iflag, &it->c_iflag);
- __put_user(kt.c_oflag, &it->c_oflag);
- __put_user(kt.c_cflag, &it->c_cflag);
- __put_user(kt.c_lflag, &it->c_lflag);
- for(error = 0; error < NCCS; error++)
- __put_user(kt.c_cc[error], &it->c_cc[error]);
- error = 0;
+
+ error = __put_user(kt.c_iflag, &it->c_iflag);
+ error |= __put_user(kt.c_oflag, &it->c_oflag);
+ error |= __put_user(kt.c_cflag, &it->c_cflag);
+ error |= __put_user(kt.c_lflag, &it->c_lflag);
+
+ for (i = 0; i < NCCS; i++)
+ error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
break;
}
@@ -112,14 +114,19 @@
old_fs = get_fs(); set_fs(get_ds());
error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
set_fs(old_fs);
- if(error)
+ if (error)
break;
- __get_user(kt.c_iflag, &it->c_iflag);
- __get_user(kt.c_oflag, &it->c_oflag);
- __get_user(kt.c_cflag, &it->c_cflag);
- __get_user(kt.c_lflag, &it->c_lflag);
- for(error = 0; error < NCCS; error++)
- __get_user(kt.c_cc[error], &it->c_cc[error]);
+
+ error = __get_user(kt.c_iflag, &it->c_iflag);
+ error |= __get_user(kt.c_oflag, &it->c_oflag);
+ error |= __get_user(kt.c_cflag, &it->c_cflag);
+ error |= __get_user(kt.c_lflag, &it->c_lflag);
+
+ for (i = 0; i < NCCS; i++)
+ error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
+
+ if (error)
+ break;
old_fs = get_fs(); set_fs(get_ds());
error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
set_fs(old_fs);
@@ -153,7 +160,7 @@
#ifdef DEBUG_IOCTLS
printk("rtp->session=%d ", rtp->session);
#endif
- error = put_user(rtp->session, (unsigned long *) arg);
+ error = put_user(rtp->session, (unsigned long __user *) arg);
break;
case 0x746e:
@@ -195,50 +202,32 @@
break;
case 0x8004667e:
-#ifdef DEBUG_IOCTLS
- printk("FIONBIO, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, FIONBIO, arg);
break;
case 0x80047476:
-#ifdef DEBUG_IOCTLS
- printk("TIOCSPGRP, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, TIOCSPGRP, arg);
break;
case 0x8020690c:
-#ifdef DEBUG_IOCTLS
- printk("SIOCSIFADDR, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCSIFADDR, arg);
break;
case 0x80206910:
-#ifdef DEBUG_IOCTLS
- printk("SIOCSIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
break;
case 0xc0206911:
-#ifdef DEBUG_IOCTLS
- printk("SIOCGIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
break;
case 0xc020691b:
-#ifdef DEBUG_IOCTLS
- printk("SIOCGIFMETRIC, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
break;
default: {
#ifdef DEBUG_MISSING_IOCTL
- char *msg = "Unimplemented IOCTL cmd tell linux@engr.sgi.com\n";
+ char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
#ifdef DEBUG_IOCTLS
printk("UNIMP_IOCTL, %08lx)\n", arg);
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index eff8932..908e636 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -76,36 +76,39 @@
}
#endif
-static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
- int signr, sigset_t *oldmask)
+static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
+ int signr, sigset_t *oldmask)
{
+ struct sigctx_irix5 __user *ctx;
unsigned long sp;
- struct sigctx_irix5 *ctx;
- int i;
+ int error, i;
sp = regs->regs[29];
sp -= sizeof(struct sigctx_irix5);
sp &= ~(0xf);
- ctx = (struct sigctx_irix5 *) sp;
+ ctx = (struct sigctx_irix5 __user *) sp;
if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
goto segv_and_exit;
- __put_user(0, &ctx->weird_fpu_thing);
- __put_user(~(0x00000001), &ctx->rmask);
- __put_user(0, &ctx->regs[0]);
+ error = __put_user(0, &ctx->weird_fpu_thing);
+ error |= __put_user(~(0x00000001), &ctx->rmask);
+ error |= __put_user(0, &ctx->regs[0]);
for(i = 1; i < 32; i++)
- __put_user((u64) regs->regs[i], &ctx->regs[i]);
+ error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
- __put_user((u64) regs->hi, &ctx->hi);
- __put_user((u64) regs->lo, &ctx->lo);
- __put_user((u64) regs->cp0_epc, &ctx->pc);
- __put_user(!!used_math(), &ctx->usedfp);
- __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
- __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
+ error |= __put_user((u64) regs->hi, &ctx->hi);
+ error |= __put_user((u64) regs->lo, &ctx->lo);
+ error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
+ error |= __put_user(!!used_math(), &ctx->usedfp);
+ error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
+ error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
- __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
+ error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
- __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t));
+ error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
+
+ if (error)
+ goto segv_and_exit;
#ifdef DEBUG_SIG
dump_irix5_sigctx(ctx);
@@ -117,13 +120,14 @@
regs->regs[7] = (unsigned long) ka->sa.sa_handler;
regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
- return;
+ return 1;
segv_and_exit:
force_sigsegv(signr, current);
+ return 0;
}
-static void inline
+static int inline
setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *oldmask, siginfo_t *info)
{
@@ -131,9 +135,11 @@
do_exit(SIGSEGV);
}
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
{
+ int ret;
+
switch(regs->regs[0]) {
case ERESTARTNOHAND:
regs->regs[2] = EINTR;
@@ -151,9 +157,9 @@
regs->regs[0] = 0; /* Don't deal with this again. */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_irix_rt_frame(ka, regs, sig, oldset, info);
+ ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
else
- setup_irix_frame(ka, regs, sig, oldset);
+ ret = setup_irix_frame(ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
@@ -161,6 +167,8 @@
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ return ret;
}
asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
@@ -184,10 +192,8 @@
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
+ if (signr > 0)
+ return handle_signal(signr, &info, &ka, oldset, regs);
no_signal:
/*
@@ -208,10 +214,11 @@
asmlinkage void
irix_sigreturn(struct pt_regs *regs)
{
- struct sigctx_irix5 *context, *magic;
+ struct sigctx_irix5 __user *context, *magic;
unsigned long umask, mask;
u64 *fregs;
- int sig, i, base = 0;
+ u32 usedfp;
+ int error, sig, i, base = 0;
sigset_t blocked;
/* Always make any pending restarted system calls return -EINTR */
@@ -220,8 +227,8 @@
if (regs->regs[2] == 1000)
base = 1;
- context = (struct sigctx_irix5 *) regs->regs[base + 4];
- magic = (struct sigctx_irix5 *) regs->regs[base + 5];
+ context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
+ magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
sig = (int) regs->regs[base + 6];
#ifdef DEBUG_SIG
printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
@@ -236,25 +243,31 @@
dump_irix5_sigctx(context);
#endif
- __get_user(regs->cp0_epc, &context->pc);
- umask = context->rmask; mask = 2;
- for (i = 1; i < 32; i++, mask <<= 1) {
- if(umask & mask)
- __get_user(regs->regs[i], &context->regs[i]);
- }
- __get_user(regs->hi, &context->hi);
- __get_user(regs->lo, &context->lo);
+ error = __get_user(regs->cp0_epc, &context->pc);
+ error |= __get_user(umask, &context->rmask);
- if ((umask & 1) && context->usedfp) {
+ mask = 2;
+ for (i = 1; i < 32; i++, mask <<= 1) {
+ if (umask & mask)
+ error |= __get_user(regs->regs[i], &context->regs[i]);
+ }
+ error |= __get_user(regs->hi, &context->hi);
+ error |= __get_user(regs->lo, &context->lo);
+
+ error |= __get_user(usedfp, &context->usedfp);
+ if ((umask & 1) && usedfp) {
fregs = (u64 *) ¤t->thread.fpu;
+
for(i = 0; i < 32; i++)
- fregs[i] = (u64) context->fpregs[i];
- __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
+ error |= __get_user(fregs[i], &context->fpregs[i]);
+ error |= __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
}
/* XXX do sigstack crapola here... XXX */
- if (__copy_from_user(&blocked, &context->sigset, sizeof(blocked)))
+ error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
+
+ if (error)
goto badframe;
sigdelsetmask(&blocked, ~_BLOCKABLE);
@@ -296,8 +309,8 @@
#endif
asmlinkage int
-irix_sigaction(int sig, const struct sigaction *act,
- struct sigaction *oact, void *trampoline)
+irix_sigaction(int sig, const struct sigaction __user *act,
+ struct sigaction __user *oact, void __user *trampoline)
{
struct k_sigaction new_ka, old_ka;
int ret;
@@ -311,12 +324,16 @@
#endif
if (act) {
sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_flags, &act->sa_flags))
- return -EFAULT;
+ int err;
- __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t));
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)))
+ return -EFAULT;
+ err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
+ err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+
+ err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
+ if (err)
+ return err;
/*
* Hmmm... methinks IRIX libc always passes a valid trampoline
@@ -330,30 +347,37 @@
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+ int err;
+
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
return -EFAULT;
- __copy_to_user(&old_ka.sa.sa_mask, &oact->sa_mask,
- sizeof(sigset_t));
+
+ err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
+ err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
+ sizeof(sigset_t)) ? -EFAULT : 0;
+ if (err)
+ return -EFAULT;
}
return ret;
}
-asmlinkage int irix_sigpending(irix_sigset_t *set)
+asmlinkage int irix_sigpending(irix_sigset_t __user *set)
{
return do_sigpending(set, sizeof(*set));
}
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old)
+asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
+ irix_sigset_t __user *old)
{
sigset_t oldbits, newbits;
if (new) {
if (!access_ok(VERIFY_READ, new, sizeof(*new)))
return -EFAULT;
- __copy_from_user(&newbits, new, sizeof(unsigned long)*4);
+ if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
+ return -EFAULT;
sigdelsetmask(&newbits, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
@@ -381,20 +405,19 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
}
- if(old) {
- if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
- return -EFAULT;
- __copy_to_user(old, ¤t->blocked, sizeof(unsigned long)*4);
- }
+ if (old)
+ return copy_to_user(old, ¤t->blocked,
+ sizeof(unsigned long)*4) ? -EFAULT : 0;
return 0;
}
asmlinkage int irix_sigsuspend(struct pt_regs *regs)
{
- sigset_t *uset, saveset, newset;
+ sigset_t saveset, newset;
+ sigset_t __user *uset;
- uset = (sigset_t *) regs->regs[4];
+ uset = (sigset_t __user *) regs->regs[4];
if (copy_from_user(&newset, uset, sizeof(sigset_t)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -440,12 +463,13 @@
} stuff;
};
-asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
- struct timespec *tp)
+asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
+ struct irix5_siginfo __user *info, struct timespec __user *tp)
{
long expire = MAX_SCHEDULE_TIMEOUT;
sigset_t kset;
int i, sig, error, timeo = 0;
+ struct timespec ktp;
#ifdef DEBUG_SIG
printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
@@ -456,14 +480,8 @@
if (!set)
return -EINVAL;
- if (!access_ok(VERIFY_READ, set, sizeof(kset))) {
- error = -EFAULT;
- goto out;
- }
-
- __copy_from_user(&kset, set, sizeof(set));
- if (error)
- goto out;
+ if (copy_from_user(&kset, set, sizeof(set)))
+ return -EFAULT;
if (info && clear_user(info, sizeof(*info))) {
error = -EFAULT;
@@ -471,19 +489,21 @@
}
if (tp) {
- if (!access_ok(VERIFY_READ, tp, sizeof(*tp)))
+ if (copy_from_user(&ktp, tp, sizeof(*tp)))
return -EFAULT;
- if (!tp->tv_sec && !tp->tv_nsec) {
- error = -EINVAL;
- goto out;
- }
- expire = timespec_to_jiffies(tp) + (tp->tv_sec||tp->tv_nsec);
+
+ if (!ktp.tv_sec && !ktp.tv_nsec)
+ return -EINVAL;
+
+ expire = timespec_to_jiffies(&ktp) +
+ (ktp.tv_sec || ktp.tv_nsec);
}
while(1) {
long tmp = 0;
- expire = schedule_timeout_interruptible(expire);
+ current->state = TASK_INTERRUPTIBLE;
+ expire = schedule_timeout(expire);
for (i=0; i<=4; i++)
tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
@@ -500,15 +520,14 @@
if (timeo)
return -EAGAIN;
- for(sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
+ for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
if (sigismember (&kset, sig))
continue;
if (sigismember (¤t->pending.signal, sig)) {
/* XXX need more than this... */
if (info)
- info->sig = sig;
- error = 0;
- goto out;
+ return copy_to_user(&info->sig, &sig, sizeof(sig));
+ return 0;
}
}
@@ -534,8 +553,9 @@
#define W_MASK (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
-asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info,
- int options, struct rusage *ru)
+asmlinkage int irix_waitsys(int type, int pid,
+ struct irix5_siginfo __user *info, int options,
+ struct rusage __user *ru)
{
int flag, retval;
DECLARE_WAITQUEUE(wait, current);
@@ -543,28 +563,22 @@
struct task_struct *p;
struct list_head *_p;
- if (!info) {
- retval = -EINVAL;
- goto out;
- }
- if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) {
- retval = -EFAULT;
- goto out;
- }
- if (ru) {
- if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) {
- retval = -EFAULT;
- goto out;
- }
- }
- if (options & ~(W_MASK)) {
- retval = -EINVAL;
- goto out;
- }
- if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) {
- retval = -EINVAL;
- goto out;
- }
+ if (!info)
+ return -EINVAL;
+
+ if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
+ return -EFAULT;
+
+ if (ru)
+ if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
+ return -EFAULT;
+
+ if (options & ~W_MASK)
+ return -EINVAL;
+
+ if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
+ return -EINVAL;
+
add_wait_queue(¤t->signal->wait_chldexit, &wait);
repeat:
flag = 0;
@@ -595,18 +609,20 @@
add_parent(p, p->parent);
write_unlock_irq(&tasklist_lock);
retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
- if (!retval && ru) {
- retval |= __put_user(SIGCHLD, &info->sig);
- retval |= __put_user(0, &info->code);
- retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
- retval |= __put_user((p->exit_code >> 8) & 0xff,
- &info->stuff.procinfo.procdata.child.status);
- retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
- retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
- }
- if (!retval) {
- p->exit_code = 0;
- }
+ if (retval)
+ goto end_waitsys;
+
+ retval = __put_user(SIGCHLD, &info->sig);
+ retval |= __put_user(0, &info->code);
+ retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+ retval |= __put_user((p->exit_code >> 8) & 0xff,
+ &info->stuff.procinfo.procdata.child.status);
+ retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
+ retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
+ if (retval)
+ goto end_waitsys;
+
+ p->exit_code = 0;
goto end_waitsys;
case EXIT_ZOMBIE:
@@ -614,16 +630,18 @@
current->signal->cstime += p->stime + p->signal->cstime;
if (ru != NULL)
getrusage(p, RUSAGE_BOTH, ru);
- __put_user(SIGCHLD, &info->sig);
- __put_user(1, &info->code); /* CLD_EXITED */
- __put_user(p->pid, &info->stuff.procinfo.pid);
- __put_user((p->exit_code >> 8) & 0xff,
+ retval = __put_user(SIGCHLD, &info->sig);
+ retval |= __put_user(1, &info->code); /* CLD_EXITED */
+ retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+ retval |= __put_user((p->exit_code >> 8) & 0xff,
&info->stuff.procinfo.procdata.child.status);
- __put_user(p->utime,
+ retval |= __put_user(p->utime,
&info->stuff.procinfo.procdata.child.utime);
- __put_user(p->stime,
+ retval |= __put_user(p->stime,
&info->stuff.procinfo.procdata.child.stime);
- retval = 0;
+ if (retval)
+ return retval;
+
if (p->real_parent != p->parent) {
write_lock_irq(&tasklist_lock);
remove_parent(p);
@@ -656,7 +674,6 @@
current->state = TASK_RUNNING;
remove_wait_queue(¤t->signal->wait_chldexit, &wait);
-out:
return retval;
}
@@ -675,39 +692,39 @@
asmlinkage int irix_getcontext(struct pt_regs *regs)
{
- int i, base = 0;
- struct irix5_context *ctx;
+ int error, i, base = 0;
+ struct irix5_context __user *ctx;
unsigned long flags;
if (regs->regs[2] == 1000)
base = 1;
- ctx = (struct irix5_context *) regs->regs[base + 4];
+ ctx = (struct irix5_context __user *) regs->regs[base + 4];
#ifdef DEBUG_SIG
printk("[%s:%d] irix_getcontext(%p)\n",
current->comm, current->pid, ctx);
#endif
- if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
+ if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)));
return -EFAULT;
- __put_user(current->thread.irix_oldctx, &ctx->link);
+ error = __put_user(current->thread.irix_oldctx, &ctx->link);
- __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t));
+ error |= __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
/* XXX Do sigstack stuff someday... */
- __put_user(0, &ctx->stack.sp);
- __put_user(0, &ctx->stack.size);
- __put_user(0, &ctx->stack.flags);
+ error |= __put_user(0, &ctx->stack.sp);
+ error |= __put_user(0, &ctx->stack.size);
+ error |= __put_user(0, &ctx->stack.flags);
- __put_user(0, &ctx->weird_graphics_thing);
- __put_user(0, &ctx->regs[0]);
+ error |= __put_user(0, &ctx->weird_graphics_thing);
+ error |= __put_user(0, &ctx->regs[0]);
for (i = 1; i < 32; i++)
- __put_user(regs->regs[i], &ctx->regs[i]);
- __put_user(regs->lo, &ctx->regs[32]);
- __put_user(regs->hi, &ctx->regs[33]);
- __put_user(regs->cp0_cause, &ctx->regs[34]);
- __put_user(regs->cp0_epc, &ctx->regs[35]);
+ error |= __put_user(regs->regs[i], &ctx->regs[i]);
+ error |= __put_user(regs->lo, &ctx->regs[32]);
+ error |= __put_user(regs->hi, &ctx->regs[33]);
+ error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
+ error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
flags = 0x0f;
if (!used_math()) {
@@ -716,119 +733,124 @@
/* XXX wheee... */
printk("Wheee, no code for saving IRIX FPU context yet.\n");
}
- __put_user(flags, &ctx->flags);
+ error |= __put_user(flags, &ctx->flags);
- return 0;
+ return error;
}
-asmlinkage unsigned long irix_setcontext(struct pt_regs *regs)
+asmlinkage void irix_setcontext(struct pt_regs *regs)
{
- int error, base = 0;
- struct irix5_context *ctx;
+ struct irix5_context __user *ctx;
+ int err, base = 0;
+ u32 flags;
- if(regs->regs[2] == 1000)
+ if (regs->regs[2] == 1000)
base = 1;
- ctx = (struct irix5_context *) regs->regs[base + 4];
+ ctx = (struct irix5_context __user *) regs->regs[base + 4];
#ifdef DEBUG_SIG
printk("[%s:%d] irix_setcontext(%p)\n",
current->comm, current->pid, ctx);
#endif
- if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
+ goto segv_and_exit;
- if (ctx->flags & 0x02) {
+ err = __get_user(flags, &ctx->flags);
+ if (flags & 0x02) {
/* XXX sigstack garbage, todo... */
printk("Wheee, cannot do sigstack stuff in setcontext\n");
}
- if (ctx->flags & 0x04) {
+ if (flags & 0x04) {
int i;
/* XXX extra control block stuff... todo... */
- for(i = 1; i < 32; i++)
- regs->regs[i] = ctx->regs[i];
- regs->lo = ctx->regs[32];
- regs->hi = ctx->regs[33];
- regs->cp0_epc = ctx->regs[35];
+ for (i = 1; i < 32; i++)
+ err |= __get_user(regs->regs[i], &ctx->regs[i]);
+ err |= __get_user(regs->lo, &ctx->regs[32]);
+ err |= __get_user(regs->hi, &ctx->regs[33]);
+ err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
}
- if (ctx->flags & 0x08) {
+ if (flags & 0x08)
/* XXX fpu context, blah... */
- printk("Wheee, cannot restore FPU context yet...\n");
- }
- current->thread.irix_oldctx = ctx->link;
- error = regs->regs[2];
+ printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
-out:
- return error;
+ err |= __get_user(current->thread.irix_oldctx, &ctx->link);
+ if (err)
+ goto segv_and_exit;
+
+ /*
+ * Don't let your children do this ...
+ */
+ if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
+ do_syscall_trace(regs, 1);
+ __asm__ __volatile__(
+ "move\t$29,%0\n\t"
+ "j\tsyscall_exit"
+ :/* no outputs */
+ :"r" (®s));
+ /* Unreached */
+
+segv_and_exit:
+ force_sigsegv(SIGSEGV, current);
}
-struct irix_sigstack { unsigned long sp; int status; };
+struct irix_sigstack {
+ unsigned long sp;
+ int status;
+};
-asmlinkage int irix_sigstack(struct irix_sigstack *new, struct irix_sigstack *old)
+asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
+ struct irix_sigstack __user *old)
{
- int error = -EFAULT;
-
#ifdef DEBUG_SIG
printk("[%s:%d] irix_sigstack(%p,%p)\n",
current->comm, current->pid, new, old);
#endif
- if(new) {
- if (!access_ok(VERIFY_READ, new, sizeof(*new)))
- goto out;
- }
-
- if(old) {
- if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
- goto out;
- }
- error = 0;
-
-out:
- return error;
-}
-
-struct irix_sigaltstack { unsigned long sp; int size; int status; };
-
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack *new,
- struct irix_sigaltstack *old)
-{
- int error = -EFAULT;
-
-#ifdef DEBUG_SIG
- printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
- current->comm, current->pid, new, old);
-#endif
if (new) {
if (!access_ok(VERIFY_READ, new, sizeof(*new)))
- goto out;
+ return -EFAULT;
}
if (old) {
if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
- goto out;
+ return -EFAULT;
}
- error = 0;
-out:
- error = 0;
+ return 0;
+}
- return error;
+struct irix_sigaltstack { unsigned long sp; int size; int status; };
+
+asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
+ struct irix_sigaltstack __user *old)
+{
+#ifdef DEBUG_SIG
+ printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
+ current->comm, current->pid, new, old);
+#endif
+ if (new)
+ if (!access_ok(VERIFY_READ, new, sizeof(*new)))
+ return -EFAULT;
+
+ if (old) {
+ if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
+ return -EFAULT;
+ }
+
+ return 0;
}
struct irix_procset {
int cmd, ltype, lid, rtype, rid;
};
-asmlinkage int irix_sigsendset(struct irix_procset *pset, int sig)
+asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
{
if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
return -EFAULT;
-
#ifdef DEBUG_SIG
printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
current->comm, current->pid,
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 43c00ac..3f653c7 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -74,7 +74,7 @@
static void level_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
- if (!cpu_has_ei)
+ if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
}
@@ -84,7 +84,7 @@
static void edge_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
- if (!cpu_has_ei)
+ if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
else {
u32 r;
@@ -129,25 +129,23 @@
#define shutdown_msc_irq disable_msc_irq
struct hw_interrupt_type msc_levelirq_type = {
- "SOC-it-Level",
- startup_msc_irq,
- shutdown_msc_irq,
- enable_msc_irq,
- disable_msc_irq,
- level_mask_and_ack_msc_irq,
- end_msc_irq,
- NULL
+ .typename = "SOC-it-Level",
+ .startup = startup_msc_irq,
+ .shutdown = shutdown_msc_irq,
+ .enable = enable_msc_irq,
+ .disable = disable_msc_irq,
+ .ack = level_mask_and_ack_msc_irq,
+ .end = end_msc_irq,
};
struct hw_interrupt_type msc_edgeirq_type = {
- "SOC-it-Edge",
- startup_msc_irq,
- shutdown_msc_irq,
- enable_msc_irq,
- disable_msc_irq,
- edge_mask_and_ack_msc_irq,
- end_msc_irq,
- NULL
+ .typename = "SOC-it-Edge",
+ .startup =startup_msc_irq,
+ .shutdown = shutdown_msc_irq,
+ .enable = enable_msc_irq,
+ .disable = disable_msc_irq,
+ .ack = edge_mask_and_ack_msc_irq,
+ .end = end_msc_irq,
};
@@ -168,14 +166,14 @@
switch (imp->im_type) {
case MSC01_IRQ_EDGE:
irq_desc[base+n].handler = &msc_edgeirq_type;
- if (cpu_has_ei)
+ if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
break;
case MSC01_IRQ_LEVEL:
irq_desc[base+n].handler = &msc_levelirq_type;
- if (cpu_has_ei)
+ if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c
index 088bbbc..0ac067f 100644
--- a/arch/mips/kernel/irq-mv6434x.c
+++ b/arch/mips/kernel/irq-mv6434x.c
@@ -135,14 +135,13 @@
#define shutdown_mv64340_irq disable_mv64340_irq
struct hw_interrupt_type mv64340_irq_type = {
- "MV-64340",
- startup_mv64340_irq,
- shutdown_mv64340_irq,
- enable_mv64340_irq,
- disable_mv64340_irq,
- mask_and_ack_mv64340_irq,
- end_mv64340_irq,
- NULL
+ .typename = "MV-64340",
+ .startup = startup_mv64340_irq,
+ .shutdown = shutdown_mv64340_irq,
+ .enable = enable_mv64340_irq,
+ .disable = disable_mv64340_irq,
+ .ack = mask_and_ack_mv64340_irq,
+ .end = end_mv64340_irq,
};
void __init mv64340_irq_init(unsigned int base)
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
index f5d779f..0b130c5 100644
--- a/arch/mips/kernel/irq-rm7000.c
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -72,13 +72,13 @@
}
static hw_irq_controller rm7k_irq_controller = {
- "RM7000",
- rm7k_cpu_irq_startup,
- rm7k_cpu_irq_shutdown,
- rm7k_cpu_irq_enable,
- rm7k_cpu_irq_disable,
- rm7k_cpu_irq_ack,
- rm7k_cpu_irq_end,
+ .typename = "RM7000",
+ .startup = rm7k_cpu_irq_startup,
+ .shutdown = rm7k_cpu_irq_shutdown,
+ .enable = rm7k_cpu_irq_enable,
+ .disable = rm7k_cpu_irq_disable,
+ .ack = rm7k_cpu_irq_ack,
+ .end = rm7k_cpu_irq_end,
};
void __init rm7k_cpu_irq_init(int base)
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index bdd1302..9b5f20c 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -106,23 +106,23 @@
}
static hw_irq_controller rm9k_irq_controller = {
- "RM9000",
- rm9k_cpu_irq_startup,
- rm9k_cpu_irq_shutdown,
- rm9k_cpu_irq_enable,
- rm9k_cpu_irq_disable,
- rm9k_cpu_irq_ack,
- rm9k_cpu_irq_end,
+ .typename = "RM9000",
+ .startup = rm9k_cpu_irq_startup,
+ .shutdown = rm9k_cpu_irq_shutdown,
+ .enable = rm9k_cpu_irq_enable,
+ .disable = rm9k_cpu_irq_disable,
+ .ack = rm9k_cpu_irq_ack,
+ .end = rm9k_cpu_irq_end,
};
static hw_irq_controller rm9k_perfcounter_irq = {
- "RM9000",
- rm9k_perfcounter_irq_startup,
- rm9k_perfcounter_irq_shutdown,
- rm9k_cpu_irq_enable,
- rm9k_cpu_irq_disable,
- rm9k_cpu_irq_ack,
- rm9k_cpu_irq_end,
+ .typename = "RM9000",
+ .startup = rm9k_perfcounter_irq_startup,
+ .shutdown = rm9k_perfcounter_irq_shutdown,
+ .enable = rm9k_cpu_irq_enable,
+ .disable = rm9k_cpu_irq_disable,
+ .ack = rm9k_cpu_irq_ack,
+ .end = rm9k_cpu_irq_end,
};
unsigned int rm9000_perfcount_irq;
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 2b936cf..5db67e3 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -3,6 +3,8 @@
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
*
* This file define the irq handler for MIPS CPU interrupts.
*
@@ -31,19 +33,21 @@
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/system.h>
static int mips_cpu_irq_base;
static inline void unmask_mips_irq(unsigned int irq)
{
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ irq_enable_hazard();
}
static inline void mask_mips_irq(unsigned int irq)
{
clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ irq_disable_hazard();
}
static inline void mips_cpu_irq_enable(unsigned int irq)
@@ -52,6 +56,7 @@
local_irq_save(flags);
unmask_mips_irq(irq);
+ back_to_back_c0_hazard();
local_irq_restore(flags);
}
@@ -61,6 +66,7 @@
local_irq_save(flags);
mask_mips_irq(irq);
+ back_to_back_c0_hazard();
local_irq_restore(flags);
}
@@ -71,7 +77,7 @@
return 0;
}
-#define mips_cpu_irq_shutdown mips_cpu_irq_disable
+#define mips_cpu_irq_shutdown mips_cpu_irq_disable
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
@@ -79,9 +85,6 @@
*/
static void mips_cpu_irq_ack(unsigned int irq)
{
- /* Only necessary for soft interrupts */
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
-
mask_mips_irq(irq);
}
@@ -92,22 +95,82 @@
}
static hw_irq_controller mips_cpu_irq_controller = {
- "MIPS",
- mips_cpu_irq_startup,
- mips_cpu_irq_shutdown,
- mips_cpu_irq_enable,
- mips_cpu_irq_disable,
- mips_cpu_irq_ack,
- mips_cpu_irq_end,
- NULL /* no affinity stuff for UP */
+ .typename = "MIPS",
+ .startup = mips_cpu_irq_startup,
+ .shutdown = mips_cpu_irq_shutdown,
+ .enable = mips_cpu_irq_enable,
+ .disable = mips_cpu_irq_disable,
+ .ack = mips_cpu_irq_ack,
+ .end = mips_cpu_irq_end,
};
+/*
+ * Basically the same as above but taking care of all the MT stuff
+ */
+
+#define unmask_mips_mt_irq unmask_mips_irq
+#define mask_mips_mt_irq mask_mips_irq
+#define mips_mt_cpu_irq_enable mips_cpu_irq_enable
+#define mips_mt_cpu_irq_disable mips_cpu_irq_disable
+
+static unsigned int mips_mt_cpu_irq_startup(unsigned int irq)
+{
+ unsigned int vpflags = dvpe();
+
+ clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ evpe(vpflags);
+ mips_mt_cpu_irq_enable(irq);
+
+ return 0;
+}
+
+#define mips_mt_cpu_irq_shutdown mips_mt_cpu_irq_disable
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues. Same for mips_cpu_irq_end.
+ */
+static void mips_mt_cpu_irq_ack(unsigned int irq)
+{
+ unsigned int vpflags = dvpe();
+ clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ evpe(vpflags);
+ mask_mips_mt_irq(irq);
+}
+
+#define mips_mt_cpu_irq_end mips_cpu_irq_end
+
+static hw_irq_controller mips_mt_cpu_irq_controller = {
+ .typename = "MIPS",
+ .startup = mips_mt_cpu_irq_startup,
+ .shutdown = mips_mt_cpu_irq_shutdown,
+ .enable = mips_mt_cpu_irq_enable,
+ .disable = mips_mt_cpu_irq_disable,
+ .ack = mips_mt_cpu_irq_ack,
+ .end = mips_mt_cpu_irq_end,
+};
void __init mips_cpu_irq_init(int irq_base)
{
int i;
- for (i = irq_base; i < irq_base + 8; i++) {
+ /* Mask interrupts. */
+ clear_c0_status(ST0_IM);
+ clear_c0_cause(CAUSEF_IP);
+
+ /*
+ * Only MT is using the software interrupts currently, so we just
+ * leave them uninitialized for other processors.
+ */
+ if (cpu_has_mipsmt)
+ for (i = irq_base; i < irq_base + 2; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &mips_mt_cpu_irq_controller;
+ }
+
+ for (i = irq_base + 2; i < irq_base + 8; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index ece4564..330cf84 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -215,81 +215,32 @@
return(n);
}
-struct rusage32 {
- struct compat_timeval ru_utime;
- struct compat_timeval ru_stime;
- int ru_maxrss;
- int ru_ixrss;
- int ru_idrss;
- int ru_isrss;
- int ru_minflt;
- int ru_majflt;
- int ru_nswap;
- int ru_inblock;
- int ru_oublock;
- int ru_msgsnd;
- int ru_msgrcv;
- int ru_nsignals;
- int ru_nvcsw;
- int ru_nivcsw;
-};
-
-static int
-put_rusage (struct rusage32 *ru, struct rusage *r)
-{
- int err;
-
- if (!access_ok(VERIFY_WRITE, ru, sizeof *ru))
- return -EFAULT;
-
- err = __put_user (r->ru_utime.tv_sec, &ru->ru_utime.tv_sec);
- err |= __put_user (r->ru_utime.tv_usec, &ru->ru_utime.tv_usec);
- err |= __put_user (r->ru_stime.tv_sec, &ru->ru_stime.tv_sec);
- err |= __put_user (r->ru_stime.tv_usec, &ru->ru_stime.tv_usec);
- err |= __put_user (r->ru_maxrss, &ru->ru_maxrss);
- err |= __put_user (r->ru_ixrss, &ru->ru_ixrss);
- err |= __put_user (r->ru_idrss, &ru->ru_idrss);
- err |= __put_user (r->ru_isrss, &ru->ru_isrss);
- err |= __put_user (r->ru_minflt, &ru->ru_minflt);
- err |= __put_user (r->ru_majflt, &ru->ru_majflt);
- err |= __put_user (r->ru_nswap, &ru->ru_nswap);
- err |= __put_user (r->ru_inblock, &ru->ru_inblock);
- err |= __put_user (r->ru_oublock, &ru->ru_oublock);
- err |= __put_user (r->ru_msgsnd, &ru->ru_msgsnd);
- err |= __put_user (r->ru_msgrcv, &ru->ru_msgrcv);
- err |= __put_user (r->ru_nsignals, &ru->ru_nsignals);
- err |= __put_user (r->ru_nvcsw, &ru->ru_nvcsw);
- err |= __put_user (r->ru_nivcsw, &ru->ru_nivcsw);
-
- return err;
-}
-
-asmlinkage int
-sys32_wait4(compat_pid_t pid, unsigned int * stat_addr, int options,
- struct rusage32 * ru)
-{
- if (!ru)
- return sys_wait4(pid, stat_addr, options, NULL);
- else {
- struct rusage r;
- int ret;
- unsigned int status;
- mm_segment_t old_fs = get_fs();
-
- set_fs(KERNEL_DS);
- ret = sys_wait4(pid, stat_addr ? &status : NULL, options, &r);
- set_fs(old_fs);
- if (put_rusage (ru, &r)) return -EFAULT;
- if (stat_addr && put_user (status, stat_addr))
- return -EFAULT;
- return ret;
- }
-}
-
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{
- return sys32_wait4(pid, stat_addr, options, NULL);
+ return compat_sys_wait4(pid, stat_addr, options, NULL);
+}
+
+asmlinkage long
+sysn32_waitid(int which, compat_pid_t pid,
+ siginfo_t __user *uinfo, int options,
+ struct compat_rusage __user *uru)
+{
+ struct rusage ru;
+ long ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs (KERNEL_DS);
+ ret = sys_waitid(which, pid, uinfo, options,
+ uru ? (struct rusage __user *) &ru : NULL);
+ set_fs (old_fs);
+
+ if (ret < 0 || uinfo->si_signo == 0)
+ return ret;
+
+ if (uru)
+ ret = put_compat_rusage(&ru, uru);
+ return ret;
}
struct sysinfo32 {
@@ -1467,3 +1418,80 @@
}
return err;
}
+
+struct sigevent32 {
+ u32 sigev_value;
+ u32 sigev_signo;
+ u32 sigev_notify;
+ u32 payload[(64 / 4) - 3];
+};
+
+extern asmlinkage long
+sys_timer_create(clockid_t which_clock,
+ struct sigevent __user *timer_event_spec,
+ timer_t __user * created_timer_id);
+
+long
+sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *timer_id)
+{
+ struct sigevent __user *p = NULL;
+ if (se32) {
+ struct sigevent se;
+ p = compat_alloc_user_space(sizeof(struct sigevent));
+ memset(&se, 0, sizeof(struct sigevent));
+ if (get_user(se.sigev_value.sival_int, &se32->sigev_value) ||
+ __get_user(se.sigev_signo, &se32->sigev_signo) ||
+ __get_user(se.sigev_notify, &se32->sigev_notify) ||
+ __copy_from_user(&se._sigev_un._pad, &se32->payload,
+ sizeof(se32->payload)) ||
+ copy_to_user(p, &se, sizeof(se)))
+ return -EFAULT;
+ }
+ return sys_timer_create(clock, p, timer_id);
+}
+
+asmlinkage long
+sysn32_rt_sigtimedwait(const sigset_t __user *uthese,
+ siginfo_t __user *uinfo,
+ const struct compat_timespec __user *uts32,
+ size_t sigsetsize)
+{
+ struct timespec __user *uts = NULL;
+
+ if (uts32) {
+ struct timespec ts;
+ uts = compat_alloc_user_space(sizeof(struct timespec));
+ if (get_user(ts.tv_sec, &uts32->tv_sec) ||
+ get_user(ts.tv_nsec, &uts32->tv_nsec) ||
+ copy_to_user (uts, &ts, sizeof (ts)))
+ return -EFAULT;
+ }
+ return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize);
+}
+
+save_static_function(sys32_clone);
+__attribute_used__ noinline static int
+_sys32_clone(nabi_no_regargs struct pt_regs regs)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+ int __user *parent_tidptr, *child_tidptr;
+
+ clone_flags = regs.regs[4];
+ newsp = regs.regs[5];
+ if (!newsp)
+ newsp = regs.regs[29];
+ parent_tidptr = (int *) regs.regs[6];
+
+ /* Use __dummy4 instead of getting it off the stack, so that
+ syscall() works. */
+ child_tidptr = (int __user *) __dummy4;
+ return do_fork(clone_flags, newsp, ®s, 0,
+ parent_tidptr, child_tidptr);
+}
+
+extern asmlinkage void sys_set_thread_area(u32 addr);
+asmlinkage void sys32_set_thread_area(u32 addr)
+{
+ sys_set_thread_area(AA(addr));
+}
diff --git a/arch/mips/kernel/module-elf32.c b/arch/mips/kernel/module-elf32.c
deleted file mode 100644
index ffd216d..0000000
--- a/arch/mips/kernel/module-elf32.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2001 Rusty Russell.
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
- struct mips_hi16 *next;
- Elf32_Addr *addr;
- Elf32_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
- if (size == 0)
- return NULL;
- return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
- vfree(module_region);
- /* FIXME: If module_region == mod->init_region, trim exception
- table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
- Elf_Shdr *sechdrs,
- char *secstrings,
- struct module *mod)
-{
- return 0;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- *location += v;
-
- return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
- return -ENOEXEC;
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
- "module %s: relocation overflow\n",
- me->name);
- return -ENOEXEC;
- }
-
- *location = (*location & ~0x03ffffff) |
- ((*location + (v >> 2)) & 0x03ffffff);
-
- return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- struct mips_hi16 *n;
-
- /*
- * We cannot relocate this one now because we don't know the value of
- * the carry we need to add. Save the information, and let LO16 do the
- * actual relocation.
- */
- n = kmalloc(sizeof *n, GFP_KERNEL);
- if (!n)
- return -ENOMEM;
-
- n->addr = location;
- n->value = v;
- n->next = mips_hi16_list;
- mips_hi16_list = n;
-
- return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- unsigned long insnlo = *location;
- Elf32_Addr val, vallo;
-
- /* Sign extend the addend we extract from the lo insn. */
- vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
- if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
-
- l = mips_hi16_list;
- while (l != NULL) {
- struct mips_hi16 *next;
- unsigned long insn;
-
- /*
- * The value for the HI16 had best be the same.
- */
- if (v != l->value)
- goto out_danger;
-
- /*
- * Do the HI16 relocation. Note that we actually don't
- * need to know anything about the LO16 itself, except
- * where to find the low 16 bits of the addend needed
- * by the LO16.
- */
- insn = *l->addr;
- val = ((insn & 0xffff) << 16) + vallo;
- val += v;
-
- /*
- * Account for the sign extension that will happen in
- * the low bits.
- */
- val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
- insn = (insn & ~0xffff) | val;
- *l->addr = insn;
-
- next = l->next;
- kfree(l);
- l = next;
- }
-
- mips_hi16_list = NULL;
- }
-
- /*
- * Ok, we're done with the HI16 relocs. Now deal with the LO16.
- */
- val = v + vallo;
- insnlo = (insnlo & ~0xffff) | (val & 0xffff);
- *location = insnlo;
-
- return 0;
-
-out_danger:
- printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
- return -ENOEXEC;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
- Elf32_Addr v) = {
- [R_MIPS_NONE] = apply_r_mips_none,
- [R_MIPS_32] = apply_r_mips_32,
- [R_MIPS_26] = apply_r_mips_26,
- [R_MIPS_HI16] = apply_r_mips_hi16,
- [R_MIPS_LO16] = apply_r_mips_lo16
-};
-
-int apply_relocate(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
- Elf32_Sym *sym;
- uint32_t *location;
- unsigned int i;
- Elf32_Addr v;
- int res;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
-
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- Elf32_Word r_info = rel[i].r_info;
-
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to */
- sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(r_info);
- if (!sym->st_value) {
- printk(KERN_WARNING "%s: Unknown symbol %s\n",
- me->name, strtab + sym->st_name);
- return -ENOENT;
- }
-
- v = sym->st_value;
-
- res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
- if (res)
- return res;
- }
-
- return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- /*
- * Current binutils always generate .rela relocations. Keep smiling
- * if it's empty, abort otherwise.
- */
- if (!sechdrs[relsec].sh_size)
- return 0;
-
- printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
- me->name);
- return -ENOEXEC;
-}
diff --git a/arch/mips/kernel/module-elf64.c b/arch/mips/kernel/module-elf64.c
deleted file mode 100644
index e804792..0000000
--- a/arch/mips/kernel/module-elf64.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2001 Rusty Russell.
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
- struct mips_hi16 *next;
- Elf32_Addr *addr;
- Elf64_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
- if (size == 0)
- return NULL;
- return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
- vfree(module_region);
- /* FIXME: If module_region == mod->init_region, trim exception
- table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
- Elf_Shdr *sechdrs,
- char *secstrings,
- struct module *mod)
-{
- return 0;
-}
-
-int apply_relocate(Elf64_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- /*
- * We don't want to deal with REL relocations - RELA is so much saner.
- */
- if (!sechdrs[relsec].sh_size)
- return 0;
-
- printk(KERN_ERR "module %s: REL relocation unsupported\n",
- me->name);
- return -ENOEXEC;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *location = v;
-
- return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
- return -ENOEXEC;
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
- "module %s: relocation overflow\n",
- me->name);
- return -ENOEXEC;
- }
-
- *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
-
- return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- struct mips_hi16 *n;
-
- /*
- * We cannot relocate this one now because we don't know the value of
- * the carry we need to add. Save the information, and let LO16 do the
- * actual relocation.
- */
- n = kmalloc(sizeof *n, GFP_KERNEL);
- if (!n)
- return -ENOMEM;
-
- n->addr = location;
- n->value = v;
- n->next = mips_hi16_list;
- mips_hi16_list = n;
-
- return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- unsigned long insnlo = *location;
- Elf32_Addr val, vallo;
-
- /* Sign extend the addend we extract from the lo insn. */
- vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
- if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
-
- l = mips_hi16_list;
- while (l != NULL) {
- struct mips_hi16 *next;
- unsigned long insn;
-
- /*
- * The value for the HI16 had best be the same.
- */
- if (v != l->value)
- goto out_danger;
-
- /*
- * Do the HI16 relocation. Note that we actually don't
- * need to know anything about the LO16 itself, except
- * where to find the low 16 bits of the addend needed
- * by the LO16.
- */
- insn = *l->addr;
- val = ((insn & 0xffff) << 16) + vallo;
- val += v;
-
- /*
- * Account for the sign extension that will happen in
- * the low bits.
- */
- val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
- insn = (insn & ~0xffff) | val;
- *l->addr = insn;
-
- next = l->next;
- kfree(l);
- l = next;
- }
-
- mips_hi16_list = NULL;
- }
-
- /*
- * Ok, we're done with the HI16 relocs. Now deal with the LO16.
- */
- insnlo = (insnlo & ~0xffff) | (v & 0xffff);
- *location = insnlo;
-
- return 0;
-
-out_danger:
- printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
- return -ENOEXEC;
-}
-
-static int apply_r_mips_64(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *(uint64_t *) location = v;
-
- return 0;
-}
-
-
-static int apply_r_mips_higher(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
-
- return 0;
-}
-
-static int apply_r_mips_highest(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
-
- return 0;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
- Elf64_Addr v) = {
- [R_MIPS_NONE] = apply_r_mips_none,
- [R_MIPS_32] = apply_r_mips_32,
- [R_MIPS_26] = apply_r_mips_26,
- [R_MIPS_HI16] = apply_r_mips_hi16,
- [R_MIPS_LO16] = apply_r_mips_lo16,
- [R_MIPS_64] = apply_r_mips_64,
- [R_MIPS_HIGHER] = apply_r_mips_higher,
- [R_MIPS_HIGHEST] = apply_r_mips_highest
-};
-
-int apply_relocate_add(Elf64_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- Elf64_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
- Elf64_Sym *sym;
- uint32_t *location;
- unsigned int i;
- Elf64_Addr v;
- int res;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
-
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to */
- sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + rel[i].r_sym;
- if (!sym->st_value) {
- printk(KERN_WARNING "%s: Unknown symbol %s\n",
- me->name, strtab + sym->st_name);
- return -ENOENT;
- }
-
- v = sym->st_value;
-
- res = reloc_handlers[rel[i].r_type](me, location, v);
- if (res)
- return res;
- }
-
- return 0;
-}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 458af3c..e54a7f4 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -1,9 +1,345 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2001 Rusty Russell.
+ * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 Thiemo Seufer
+ */
+
+#undef DEBUG
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+struct mips_hi16 {
+ struct mips_hi16 *next;
+ Elf_Addr *addr;
+ Elf_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+
static LIST_HEAD(dbe_list);
static DEFINE_SPINLOCK(dbe_lock);
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ char *secstrings, struct module *mod)
+{
+ return 0;
+}
+
+static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+{
+ return 0;
+}
+
+static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location += v;
+
+ return 0;
+}
+
+static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location = v;
+
+ return 0;
+}
+
+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ return -ENOEXEC;
+ }
+
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & ~0x03ffffff) |
+ ((*location + (v >> 2)) & 0x03ffffff);
+
+ return 0;
+}
+
+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ return -ENOEXEC;
+ }
+
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
+
+ return 0;
+}
+
+static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ struct mips_hi16 *n;
+
+ /*
+ * We cannot relocate this one now because we don't know the value of
+ * the carry we need to add. Save the information, and let LO16 do the
+ * actual relocation.
+ */
+ n = kmalloc(sizeof *n, GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+
+ n->addr = (Elf_Addr *)location;
+ n->value = v;
+ n->next = mips_hi16_list;
+ mips_hi16_list = n;
+
+ return 0;
+}
+
+static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ unsigned long insnlo = *location;
+ Elf_Addr val, vallo;
+
+ /* Sign extend the addend we extract from the lo insn. */
+ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+ if (mips_hi16_list != NULL) {
+ struct mips_hi16 *l;
+
+ l = mips_hi16_list;
+ while (l != NULL) {
+ struct mips_hi16 *next;
+ unsigned long insn;
+
+ /*
+ * The value for the HI16 had best be the same.
+ */
+ if (v != l->value)
+ goto out_danger;
+
+ /*
+ * Do the HI16 relocation. Note that we actually don't
+ * need to know anything about the LO16 itself, except
+ * where to find the low 16 bits of the addend needed
+ * by the LO16.
+ */
+ insn = *l->addr;
+ val = ((insn & 0xffff) << 16) + vallo;
+ val += v;
+
+ /*
+ * Account for the sign extension that will happen in
+ * the low bits.
+ */
+ val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+ insn = (insn & ~0xffff) | val;
+ *l->addr = insn;
+
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+
+ mips_hi16_list = NULL;
+ }
+
+ /*
+ * Ok, we're done with the HI16 relocs. Now deal with the LO16.
+ */
+ val = v + vallo;
+ insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+ *location = insnlo;
+
+ return 0;
+
+out_danger:
+ printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+ return -ENOEXEC;
+}
+
+static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) | (v & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *(Elf_Addr *)location = v;
+
+ return 0;
+}
+
+static int apply_r_mips_higher_rela(struct module *me, u32 *location,
+ Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_highest_rela(struct module *me, u32 *location,
+ Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
+
+ return 0;
+}
+
+static int (*reloc_handlers_rel[]) (struct module *me, u32 *location,
+ Elf_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32_rel,
+ [R_MIPS_26] = apply_r_mips_26_rel,
+ [R_MIPS_HI16] = apply_r_mips_hi16_rel,
+ [R_MIPS_LO16] = apply_r_mips_lo16_rel
+};
+
+static int (*reloc_handlers_rela[]) (struct module *me, u32 *location,
+ Elf_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32_rela,
+ [R_MIPS_26] = apply_r_mips_26_rela,
+ [R_MIPS_HI16] = apply_r_mips_hi16_rela,
+ [R_MIPS_LO16] = apply_r_mips_lo16_rela,
+ [R_MIPS_64] = apply_r_mips_64_rela,
+ [R_MIPS_HIGHER] = apply_r_mips_higher_rela,
+ [R_MIPS_HIGHEST] = apply_r_mips_highest_rela
+};
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me)
+{
+ Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf_Sym *sym;
+ u32 *location;
+ unsigned int i;
+ Elf_Addr v;
+ int res;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ + ELF_MIPS_R_SYM(rel[i]);
+ if (!sym->st_value) {
+ printk(KERN_WARNING "%s: Unknown symbol %s\n",
+ me->name, strtab + sym->st_name);
+ return -ENOENT;
+ }
+
+ v = sym->st_value;
+
+ res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me)
+{
+ Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf_Sym *sym;
+ u32 *location;
+ unsigned int i;
+ Elf_Addr v;
+ int res;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ + ELF_MIPS_R_SYM(rel[i]);
+ if (!sym->st_value) {
+ printk(KERN_WARNING "%s: Unknown symbol %s\n",
+ me->name, strtab + sym->st_name);
+ return -ENOENT;
+ }
+
+ v = sym->st_value + rel[i].r_addend;
+
+ res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
/* Given an address, look for it in the module exception tables. */
const struct exception_table_entry *search_module_dbetables(unsigned long addr)
{
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 0f159f3..86fe15b 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -2,7 +2,8 @@
* linux/arch/mips/kernel/proc.c
*
* Copyright (C) 1995, 1996, 2001 Ralf Baechle
- * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#include <linux/config.h>
#include <linux/delay.h>
@@ -19,63 +20,69 @@
unsigned int vced_count, vcei_count;
static const char *cpu_name[] = {
- [CPU_UNKNOWN] "unknown",
- [CPU_R2000] "R2000",
- [CPU_R3000] "R3000",
- [CPU_R3000A] "R3000A",
- [CPU_R3041] "R3041",
- [CPU_R3051] "R3051",
- [CPU_R3052] "R3052",
- [CPU_R3081] "R3081",
- [CPU_R3081E] "R3081E",
- [CPU_R4000PC] "R4000PC",
- [CPU_R4000SC] "R4000SC",
- [CPU_R4000MC] "R4000MC",
- [CPU_R4200] "R4200",
- [CPU_R4400PC] "R4400PC",
- [CPU_R4400SC] "R4400SC",
- [CPU_R4400MC] "R4400MC",
- [CPU_R4600] "R4600",
- [CPU_R6000] "R6000",
- [CPU_R6000A] "R6000A",
- [CPU_R8000] "R8000",
- [CPU_R10000] "R10000",
- [CPU_R12000] "R12000",
- [CPU_R4300] "R4300",
- [CPU_R4650] "R4650",
- [CPU_R4700] "R4700",
- [CPU_R5000] "R5000",
- [CPU_R5000A] "R5000A",
- [CPU_R4640] "R4640",
- [CPU_NEVADA] "Nevada",
- [CPU_RM7000] "RM7000",
- [CPU_RM9000] "RM9000",
- [CPU_R5432] "R5432",
- [CPU_4KC] "MIPS 4Kc",
- [CPU_5KC] "MIPS 5Kc",
- [CPU_R4310] "R4310",
- [CPU_SB1] "SiByte SB1",
- [CPU_TX3912] "TX3912",
- [CPU_TX3922] "TX3922",
- [CPU_TX3927] "TX3927",
- [CPU_AU1000] "Au1000",
- [CPU_AU1500] "Au1500",
- [CPU_4KEC] "MIPS 4KEc",
- [CPU_4KSC] "MIPS 4KSc",
- [CPU_VR41XX] "NEC Vr41xx",
- [CPU_R5500] "R5500",
- [CPU_TX49XX] "TX49xx",
- [CPU_20KC] "MIPS 20Kc",
- [CPU_24K] "MIPS 24K",
- [CPU_25KF] "MIPS 25Kf",
- [CPU_VR4111] "NEC VR4111",
- [CPU_VR4121] "NEC VR4121",
- [CPU_VR4122] "NEC VR4122",
- [CPU_VR4131] "NEC VR4131",
- [CPU_VR4133] "NEC VR4133",
- [CPU_VR4181] "NEC VR4181",
- [CPU_VR4181A] "NEC VR4181A",
- [CPU_SR71000] "Sandcraft SR71000"
+ [CPU_UNKNOWN] = "unknown",
+ [CPU_R2000] = "R2000",
+ [CPU_R3000] = "R3000",
+ [CPU_R3000A] = "R3000A",
+ [CPU_R3041] = "R3041",
+ [CPU_R3051] = "R3051",
+ [CPU_R3052] = "R3052",
+ [CPU_R3081] = "R3081",
+ [CPU_R3081E] = "R3081E",
+ [CPU_R4000PC] = "R4000PC",
+ [CPU_R4000SC] = "R4000SC",
+ [CPU_R4000MC] = "R4000MC",
+ [CPU_R4200] = "R4200",
+ [CPU_R4400PC] = "R4400PC",
+ [CPU_R4400SC] = "R4400SC",
+ [CPU_R4400MC] = "R4400MC",
+ [CPU_R4600] = "R4600",
+ [CPU_R6000] = "R6000",
+ [CPU_R6000A] = "R6000A",
+ [CPU_R8000] = "R8000",
+ [CPU_R10000] = "R10000",
+ [CPU_R12000] = "R12000",
+ [CPU_R4300] = "R4300",
+ [CPU_R4650] = "R4650",
+ [CPU_R4700] = "R4700",
+ [CPU_R5000] = "R5000",
+ [CPU_R5000A] = "R5000A",
+ [CPU_R4640] = "R4640",
+ [CPU_NEVADA] = "Nevada",
+ [CPU_RM7000] = "RM7000",
+ [CPU_RM9000] = "RM9000",
+ [CPU_R5432] = "R5432",
+ [CPU_4KC] = "MIPS 4Kc",
+ [CPU_5KC] = "MIPS 5Kc",
+ [CPU_R4310] = "R4310",
+ [CPU_SB1] = "SiByte SB1",
+ [CPU_SB1A] = "SiByte SB1A",
+ [CPU_TX3912] = "TX3912",
+ [CPU_TX3922] = "TX3922",
+ [CPU_TX3927] = "TX3927",
+ [CPU_AU1000] = "Au1000",
+ [CPU_AU1500] = "Au1500",
+ [CPU_AU1100] = "Au1100",
+ [CPU_AU1550] = "Au1550",
+ [CPU_AU1200] = "Au1200",
+ [CPU_4KEC] = "MIPS 4KEc",
+ [CPU_4KSC] = "MIPS 4KSc",
+ [CPU_VR41XX] = "NEC Vr41xx",
+ [CPU_R5500] = "R5500",
+ [CPU_TX49XX] = "TX49xx",
+ [CPU_20KC] = "MIPS 20Kc",
+ [CPU_24K] = "MIPS 24K",
+ [CPU_25KF] = "MIPS 25Kf",
+ [CPU_34K] = "MIPS 34K",
+ [CPU_VR4111] = "NEC VR4111",
+ [CPU_VR4121] = "NEC VR4121",
+ [CPU_VR4122] = "NEC VR4122",
+ [CPU_VR4131] = "NEC VR4131",
+ [CPU_VR4133] = "NEC VR4133",
+ [CPU_VR4181] = "NEC VR4181",
+ [CPU_VR4181A] = "NEC VR4181A",
+ [CPU_SR71000] = "Sandcraft SR71000",
+ [CPU_PR4450] = "Philips PR4450",
};
@@ -105,8 +112,8 @@
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
- loops_per_jiffy / (500000/HZ),
- (loops_per_jiffy / (5000/HZ)) % 100);
+ cpu_data[n].udelay_val / (500000/HZ),
+ (cpu_data[n].udelay_val / (5000/HZ)) % 100);
seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
seq_printf(m, "microsecond timers\t: %s\n",
cpu_has_counter ? "yes" : "no");
@@ -115,6 +122,14 @@
cpu_has_divec ? "yes" : "no");
seq_printf(m, "hardware watchpoint\t: %s\n",
cpu_has_watch ? "yes" : "no");
+ seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
+ cpu_has_mips16 ? " mips16" : "",
+ cpu_has_mdmx ? " mdmx" : "",
+ cpu_has_mips3d ? " mips3d" : "",
+ cpu_has_smartmips ? " smartmips" : "",
+ cpu_has_dsp ? " dsp" : "",
+ cpu_has_mipsmt ? " mt" : ""
+ );
sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
cpu_has_vce ? "%u" : "not available");
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index e4f2f80..4fe3d57 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -25,8 +25,10 @@
#include <linux/init.h>
#include <linux/completion.h>
+#include <asm/abi.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -39,14 +41,6 @@
#include <asm/inst.h>
/*
- * We use this if we don't have any better idle routine..
- * (This to kill: kernel/platform.c.
- */
-void default_idle (void)
-{
-}
-
-/*
* The idle thread. There's no useful work to be done, so just try to conserve
* power and have a low exit latency (ie sit in a loop waiting for somebody to
* say that they'd like to reschedule)
@@ -62,6 +56,54 @@
}
}
+extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Native o32 and N64 ABI without DSP ASE
+ */
+extern int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set);
+extern int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi = {
+ .do_signal = do_signal,
+#ifdef CONFIG_TRAD_SIGNALS
+ .setup_frame = setup_frame,
+#endif
+ .setup_rt_frame = setup_rt_frame
+};
+
+#ifdef CONFIG_MIPS32_O32
+/*
+ * o32 compatibility on 64-bit kernels, without DSP ASE
+ */
+extern int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set);
+extern int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_32 = {
+ .do_signal = do_signal32,
+ .setup_frame = setup_frame_32,
+ .setup_rt_frame = setup_rt_frame_32
+};
+#endif /* CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_MIPS32_N32
+/*
+ * N32 on 64-bit kernels, without DSP ASE
+ */
+extern int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_n32 = {
+ .do_signal = do_signal,
+ .setup_rt_frame = setup_rt_frame_n32
+};
+#endif /* CONFIG_MIPS32_N32 */
+
asmlinkage void ret_from_fork(void);
void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
@@ -78,6 +120,8 @@
regs->cp0_status = status;
clear_used_math();
lose_fpu();
+ if (cpu_has_dsp)
+ __init_dsp();
regs->cp0_epc = pc;
regs->regs[29] = sp;
current_thread_info()->addr_limit = USER_DS;
@@ -97,14 +141,17 @@
struct thread_info *ti = p->thread_info;
struct pt_regs *childregs;
long childksp;
+ p->set_child_tid = p->clear_child_tid = NULL;
childksp = (unsigned long)ti + THREAD_SIZE - 32;
preempt_disable();
- if (is_fpu_owner()) {
+ if (is_fpu_owner())
save_fp(p);
- }
+
+ if (cpu_has_dsp)
+ save_dsp(p);
preempt_enable();
@@ -142,6 +189,9 @@
childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
clear_tsk_thread_flag(p, TIF_USEDFPU);
+ if (clone_flags & CLONE_SETTLS)
+ ti->tp_value = regs->regs[7];
+
return 0;
}
@@ -175,6 +225,14 @@
#endif
}
+int dump_task_regs (struct task_struct *tsk, elf_gregset_t *regs)
+{
+ struct thread_info *ti = tsk->thread_info;
+ long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+ dump_regs(&(*regs)[0], (struct pt_regs *) ksp - 1);
+ return 1;
+}
+
int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr)
{
memcpy(fpr, &t->thread.fpu, sizeof(current->thread.fpu));
@@ -211,22 +269,48 @@
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
}
-struct mips_frame_info {
+static struct mips_frame_info {
+ void *func;
+ int omit_fp; /* compiled without fno-omit-frame-pointer */
int frame_offset;
int pc_offset;
+} schedule_frame, mfinfo[] = {
+ { schedule, 0 }, /* must be first */
+ /* arch/mips/kernel/semaphore.c */
+ { __down, 1 },
+ { __down_interruptible, 1 },
+ /* kernel/sched.c */
+#ifdef CONFIG_PREEMPT
+ { preempt_schedule, 0 },
+#endif
+ { wait_for_completion, 0 },
+ { interruptible_sleep_on, 0 },
+ { interruptible_sleep_on_timeout, 0 },
+ { sleep_on, 0 },
+ { sleep_on_timeout, 0 },
+ { yield, 0 },
+ { io_schedule, 0 },
+ { io_schedule_timeout, 0 },
+#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT)
+ { __preempt_spin_lock, 0 },
+ { __preempt_write_lock, 0 },
+#endif
+ /* kernel/timer.c */
+ { schedule_timeout, 1 },
+/* { nanosleep_restart, 1 }, */
+ /* lib/rwsem-spinlock.c */
+ { __down_read, 1 },
+ { __down_write, 1 },
};
-static struct mips_frame_info schedule_frame;
-static struct mips_frame_info schedule_timeout_frame;
-static struct mips_frame_info sleep_on_frame;
-static struct mips_frame_info sleep_on_timeout_frame;
-static struct mips_frame_info wait_for_completion_frame;
+
static int mips_frame_info_initialized;
-static int __init get_frame_info(struct mips_frame_info *info, void *func)
+static int __init get_frame_info(struct mips_frame_info *info)
{
int i;
+ void *func = info->func;
union mips_instruction *ip = (union mips_instruction *)func;
info->pc_offset = -1;
- info->frame_offset = -1;
+ info->frame_offset = info->omit_fp ? 0 : -1;
for (i = 0; i < 128; i++, ip++) {
/* if jal, jalr, jr, stop. */
if (ip->j_format.opcode == jal_op ||
@@ -247,14 +331,16 @@
/* sw / sd $ra, offset($sp) */
if (ip->i_format.rt == 31) {
if (info->pc_offset != -1)
- break;
+ continue;
info->pc_offset =
ip->i_format.simmediate / sizeof(long);
}
/* sw / sd $s8, offset($sp) */
if (ip->i_format.rt == 30) {
+//#if 0 /* gcc 3.4 does aggressive optimization... */
if (info->frame_offset != -1)
- break;
+ continue;
+//#endif
info->frame_offset =
ip->i_format.simmediate / sizeof(long);
}
@@ -272,13 +358,25 @@
static int __init frame_info_init(void)
{
- mips_frame_info_initialized =
- !get_frame_info(&schedule_frame, schedule) &&
- !get_frame_info(&schedule_timeout_frame, schedule_timeout) &&
- !get_frame_info(&sleep_on_frame, sleep_on) &&
- !get_frame_info(&sleep_on_timeout_frame, sleep_on_timeout) &&
- !get_frame_info(&wait_for_completion_frame, wait_for_completion);
-
+ int i, found;
+ for (i = 0; i < ARRAY_SIZE(mfinfo); i++)
+ if (get_frame_info(&mfinfo[i]))
+ return -1;
+ schedule_frame = mfinfo[0];
+ /* bubble sort */
+ do {
+ struct mips_frame_info tmp;
+ found = 0;
+ for (i = 1; i < ARRAY_SIZE(mfinfo); i++) {
+ if (mfinfo[i-1].func > mfinfo[i].func) {
+ tmp = mfinfo[i];
+ mfinfo[i] = mfinfo[i-1];
+ mfinfo[i-1] = tmp;
+ found = 1;
+ }
+ }
+ } while (found);
+ mips_frame_info_initialized = 1;
return 0;
}
@@ -303,60 +401,39 @@
/* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */
unsigned long get_wchan(struct task_struct *p)
{
+ unsigned long stack_page;
unsigned long frame, pc;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
- if (!mips_frame_info_initialized)
+ stack_page = (unsigned long)p->thread_info;
+ if (!stack_page || !mips_frame_info_initialized)
return 0;
+
pc = thread_saved_pc(p);
if (!in_sched_functions(pc))
- goto out;
+ return pc;
- if (pc >= (unsigned long) sleep_on_timeout)
- goto schedule_timeout_caller;
- if (pc >= (unsigned long) sleep_on)
- goto schedule_caller;
- if (pc >= (unsigned long) interruptible_sleep_on_timeout)
- goto schedule_timeout_caller;
- if (pc >= (unsigned long)interruptible_sleep_on)
- goto schedule_caller;
- if (pc >= (unsigned long)wait_for_completion)
- goto schedule_caller;
- goto schedule_timeout_caller;
-
-schedule_caller:
frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
- if (pc >= (unsigned long) sleep_on)
- pc = ((unsigned long *)frame)[sleep_on_frame.pc_offset];
- else
- pc = ((unsigned long *)frame)[wait_for_completion_frame.pc_offset];
- goto out;
+ do {
+ int i;
-schedule_timeout_caller:
- /*
- * The schedule_timeout frame
- */
- frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
+ if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
+ return 0;
- /*
- * frame now points to sleep_on_timeout's frame
- */
- pc = ((unsigned long *)frame)[schedule_timeout_frame.pc_offset];
+ for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) {
+ if (pc >= (unsigned long) mfinfo[i].func)
+ break;
+ }
+ if (i < 0)
+ break;
- if (in_sched_functions(pc)) {
- /* schedule_timeout called by [interruptible_]sleep_on_timeout */
- frame = ((unsigned long *)frame)[schedule_timeout_frame.frame_offset];
- pc = ((unsigned long *)frame)[sleep_on_timeout_frame.pc_offset];
- }
-
-out:
-
-#ifdef CONFIG_64BIT
- if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps */
- pc &= 0xffffffffUL;
-#endif
+ if (mfinfo[i].omit_fp)
+ break;
+ pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
+ frame = ((unsigned long *)frame)[mfinfo[i].frame_offset];
+ } while (in_sched_functions(pc));
return pc;
}
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 0b571a5..fcceab8 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -28,14 +28,18 @@
#include <linux/security.h>
#include <linux/signal.h>
+#include <asm/byteorder.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
+#include <asm/reg.h>
/*
* Called by kernel/ptrace.c when detaching..
@@ -47,6 +51,129 @@
/* Nothing to do.. */
}
+/*
+ * Read a general register set. We always use the 64-bit format, even
+ * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
+ * Registers are sign extended to fill the available space.
+ */
+int ptrace_getregs (struct task_struct *child, __s64 __user *data)
+{
+ struct pt_regs *regs;
+ int i;
+
+ if (!access_ok(VERIFY_WRITE, data, 38 * 8))
+ return -EIO;
+
+ regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+ THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+ for (i = 0; i < 32; i++)
+ __put_user (regs->regs[i], data + i);
+ __put_user (regs->lo, data + EF_LO - EF_R0);
+ __put_user (regs->hi, data + EF_HI - EF_R0);
+ __put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+ __put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
+ __put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
+ __put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+
+ return 0;
+}
+
+/*
+ * Write a general register set. As for PTRACE_GETREGS, we always use
+ * the 64-bit format. On a 32-bit kernel only the lower order half
+ * (according to endianness) will be used.
+ */
+int ptrace_setregs (struct task_struct *child, __s64 __user *data)
+{
+ struct pt_regs *regs;
+ int i;
+
+ if (!access_ok(VERIFY_READ, data, 38 * 8))
+ return -EIO;
+
+ regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+ THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+ for (i = 0; i < 32; i++)
+ __get_user (regs->regs[i], data + i);
+ __get_user (regs->lo, data + EF_LO - EF_R0);
+ __get_user (regs->hi, data + EF_HI - EF_R0);
+ __get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+
+ /* badvaddr, status, and cause may not be written. */
+
+ return 0;
+}
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
+{
+ int i;
+
+ if (!access_ok(VERIFY_WRITE, data, 33 * 8))
+ return -EIO;
+
+ if (tsk_used_math(child)) {
+ fpureg_t *fregs = get_fpu_regs(child);
+ for (i = 0; i < 32; i++)
+ __put_user (fregs[i], i + (__u64 __user *) data);
+ } else {
+ for (i = 0; i < 32; i++)
+ __put_user ((__u64) -1, i + (__u64 __user *) data);
+ }
+
+ if (cpu_has_fpu) {
+ unsigned int flags, tmp;
+
+ __put_user (child->thread.fpu.hard.fcr31, data + 64);
+
+ preempt_disable();
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+ write_c0_status(flags);
+ evpe(vpflags);
+ } else {
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+ write_c0_status(flags);
+ }
+ preempt_enable();
+ __put_user (tmp, data + 65);
+ } else {
+ __put_user (child->thread.fpu.soft.fcr31, data + 64);
+ __put_user ((__u32) 0, data + 65);
+ }
+
+ return 0;
+}
+
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
+{
+ fpureg_t *fregs;
+ int i;
+
+ if (!access_ok(VERIFY_READ, data, 33 * 8))
+ return -EIO;
+
+ fregs = get_fpu_regs(child);
+
+ for (i = 0; i < 32; i++)
+ __get_user (fregs[i], i + (__u64 __user *) data);
+
+ if (cpu_has_fpu)
+ __get_user (child->thread.fpu.hard.fcr31, data + 64);
+ else
+ __get_user (child->thread.fpu.soft.fcr31, data + 64);
+
+ /* FIR may not be written. */
+
+ return 0;
+}
+
asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
@@ -103,7 +230,7 @@
ret = -EIO;
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp,(unsigned long *) data);
+ ret = put_user(tmp,(unsigned long __user *) data);
break;
}
@@ -169,18 +296,53 @@
if (!cpu_has_fpu)
break;
- flags = read_c0_status();
- __enable_fpu();
- __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
- write_c0_status(flags);
+ preempt_disable();
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ evpe(vpflags);
+ } else {
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ }
+ preempt_enable();
break;
}
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ if (child->thread.dsp.used_dsp) {
+ dregs = __get_dsp_regs(child);
+ tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+ } else {
+ tmp = -1; /* DSP registers yet used */
+ }
+ break;
+ }
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ tmp = child->thread.dsp.dspcontrol;
+ break;
default:
tmp = 0;
ret = -EIO;
goto out_tsk;
}
- ret = put_user(tmp, (unsigned long *) data);
+ ret = put_user(tmp, (unsigned long __user *) data);
break;
}
@@ -247,6 +409,25 @@
else
child->thread.fpu.soft.fcr31 = data;
break;
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+
+ dregs = __get_dsp_regs(child);
+ dregs[addr - DSP_BASE] = data;
+ break;
+ }
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+ child->thread.dsp.dspcontrol = data;
+ break;
default:
/* The rest are not allowed. */
ret = -EIO;
@@ -255,6 +436,22 @@
break;
}
+ case PTRACE_GETREGS:
+ ret = ptrace_getregs (child, (__u64 __user *) data);
+ break;
+
+ case PTRACE_SETREGS:
+ ret = ptrace_setregs (child, (__u64 __user *) data);
+ break;
+
+ case PTRACE_GETFPREGS:
+ ret = ptrace_getfpregs (child, (__u32 __user *) data);
+ break;
+
+ case PTRACE_SETFPREGS:
+ ret = ptrace_setfpregs (child, (__u32 __user *) data);
+ break;
+
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
case PTRACE_CONT: { /* restart after signal. */
ret = -EIO;
@@ -289,6 +486,11 @@
ret = ptrace_detach(child, data);
break;
+ case PTRACE_GET_THREAD_AREA:
+ ret = put_user(child->thread_info->tp_value,
+ (unsigned long __user *) data);
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
@@ -303,21 +505,14 @@
static inline int audit_arch(void)
{
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ int arch = EM_MIPS;
#ifdef CONFIG_64BIT
- if (!(current->thread.mflags & MF_32BIT_REGS))
- return AUDIT_ARCH_MIPSEL64;
-#endif /* MIPS64 */
- return AUDIT_ARCH_MIPSEL;
-
-#else /* big endian... */
-#ifdef CONFIG_64BIT
- if (!(current->thread.mflags & MF_32BIT_REGS))
- return AUDIT_ARCH_MIPS64;
-#endif /* MIPS64 */
- return AUDIT_ARCH_MIPS;
-
-#endif /* endian */
+ arch |= __AUDIT_ARCH_64BIT;
+#endif
+#if defined(__LITTLE_ENDIAN)
+ arch |= __AUDIT_ARCH_LE;
+#endif
+ return arch;
}
/*
@@ -327,12 +522,13 @@
asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
{
if (unlikely(current->audit_context) && entryexit)
- audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]), regs->regs[2]);
+ audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+ regs->regs[2]);
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- goto out;
if (!(current->ptrace & PT_PTRACED))
goto out;
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ goto out;
/* The 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index eee2079..9a9b049 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -24,17 +24,24 @@
#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
-#include <linux/signal.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
+int ptrace_getregs (struct task_struct *child, __s64 __user *data);
+int ptrace_setregs (struct task_struct *child, __s64 __user *data);
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data);
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data);
+
/*
* Tracing a 32-bit process with a 64-bit strace and vice versa will not
* work. I don't know how to fix this.
@@ -99,6 +106,35 @@
break;
}
+ /*
+ * Read 4 bytes of the other process' storage
+ * data is a pointer specifying where the user wants the
+ * 4 bytes copied into
+ * addr is a pointer in the user's storage that contains an 8 byte
+ * address in the other process of the 4 bytes that is to be read
+ * (this is run in a 32-bit process looking at a 64-bit process)
+ * when I and D space are separate, these will need to be fixed.
+ */
+ case PTRACE_PEEKTEXT_3264:
+ case PTRACE_PEEKDATA_3264: {
+ u32 tmp;
+ int copied;
+ u32 __user * addrOthers;
+
+ ret = -EIO;
+
+ /* Get the addr in the other process that we want to read */
+ if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+ break;
+
+ copied = access_process_vm(child, (u64)addrOthers, &tmp,
+ sizeof(tmp), 0);
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (u32 __user *) (unsigned long) data);
+ break;
+ }
+
/* Read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
struct pt_regs *regs;
@@ -156,12 +192,44 @@
if (!cpu_has_fpu)
break;
- flags = read_c0_status();
- __enable_fpu();
- __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
- write_c0_status(flags);
+ preempt_disable();
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ evpe(vpflags);
+ } else {
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ }
+ preempt_enable();
break;
}
+ case DSP_BASE ... DSP_BASE + 5:
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ if (child->thread.dsp.used_dsp) {
+ dspreg_t *dregs = __get_dsp_regs(child);
+ tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+ } else {
+ tmp = -1; /* DSP registers yet used */
+ }
+ break;
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ tmp = child->thread.dsp.dspcontrol;
+ break;
default:
tmp = 0;
ret = -EIO;
@@ -181,6 +249,31 @@
ret = -EIO;
break;
+ /*
+ * Write 4 bytes into the other process' storage
+ * data is the 4 bytes that the user wants written
+ * addr is a pointer in the user's storage that contains an
+ * 8 byte address in the other process where the 4 bytes
+ * that is to be written
+ * (this is run in a 32-bit process looking at a 64-bit process)
+ * when I and D space are separate, these will need to be fixed.
+ */
+ case PTRACE_POKETEXT_3264:
+ case PTRACE_POKEDATA_3264: {
+ u32 __user * addrOthers;
+
+ /* Get the addr in the other process that we want to write into */
+ ret = -EIO;
+ if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+ break;
+ ret = 0;
+ if (access_process_vm(child, (u64)addrOthers, &data,
+ sizeof(data), 1) == sizeof(data))
+ break;
+ ret = -EIO;
+ break;
+ }
+
case PTRACE_POKEUSR: {
struct pt_regs *regs;
ret = 0;
@@ -231,6 +324,22 @@
else
child->thread.fpu.soft.fcr31 = data;
break;
+ case DSP_BASE ... DSP_BASE + 5:
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+
+ dspreg_t *dregs = __get_dsp_regs(child);
+ dregs[addr - DSP_BASE] = data;
+ break;
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+ child->thread.dsp.dspcontrol = data;
+ break;
default:
/* The rest are not allowed. */
ret = -EIO;
@@ -239,6 +348,22 @@
break;
}
+ case PTRACE_GETREGS:
+ ret = ptrace_getregs (child, (__u64 __user *) (__u64) data);
+ break;
+
+ case PTRACE_SETREGS:
+ ret = ptrace_setregs (child, (__u64 __user *) (__u64) data);
+ break;
+
+ case PTRACE_GETFPREGS:
+ ret = ptrace_getfpregs (child, (__u32 __user *) (__u64) data);
+ break;
+
+ case PTRACE_SETFPREGS:
+ ret = ptrace_setfpregs (child, (__u32 __user *) (__u64) data);
+ break;
+
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
case PTRACE_CONT: { /* restart after signal. */
ret = -EIO;
@@ -269,10 +394,25 @@
wake_up_process(child);
break;
+ case PTRACE_GET_THREAD_AREA:
+ ret = put_user(child->thread_info->tp_value,
+ (unsigned int __user *) (unsigned long) data);
+ break;
+
case PTRACE_DETACH: /* detach a process that was attached. */
ret = ptrace_detach(child, data);
break;
+ case PTRACE_GETEVENTMSG:
+ ret = put_user(child->ptrace_message,
+ (unsigned int __user *) (unsigned long) data);
+ break;
+
+ case PTRACE_GET_THREAD_AREA_3264:
+ ret = put_user(child->thread_info->tp_value,
+ (unsigned long __user *) (unsigned long) data);
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 1a14c6b..283a985 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -32,7 +32,7 @@
.set noreorder
.set mips3
- /* Save floating point context */
+
LEAF(_save_fp_context)
cfc1 t1, fcr31
@@ -74,9 +74,6 @@
EX sdc1 $f28, SC_FPREGS+224(a0)
EX sdc1 $f30, SC_FPREGS+240(a0)
EX sw t1, SC_FPC_CSR(a0)
- cfc1 t0, $0 # implementation/version
- EX sw t0, SC_FPC_EIR(a0)
-
jr ra
li v0, 0 # success
END(_save_fp_context)
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
new file mode 100644
index 0000000..8c81f3c
--- /dev/null
+++ b/arch/mips/kernel/rtlx.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/rtlx.h>
+
+#define RTLX_MAJOR 64
+#define RTLX_TARG_VPE 1
+
+struct rtlx_info *rtlx;
+static int major;
+static char module_name[] = "rtlx";
+static inline int spacefree(int read, int write, int size);
+
+static struct chan_waitqueues {
+ wait_queue_head_t rt_queue;
+ wait_queue_head_t lx_queue;
+} channel_wqs[RTLX_CHANNELS];
+
+static struct irqaction irq;
+static int irq_num;
+
+extern void *vpe_get_shared(int index);
+
+static void rtlx_dispatch(struct pt_regs *regs)
+{
+ do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs);
+}
+
+irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ irqreturn_t r = IRQ_HANDLED;
+ int i;
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ struct rtlx_channel *chan = &rtlx->channel[i];
+
+ if (chan->lx_read != chan->lx_write)
+ wake_up_interruptible(&channel_wqs[i].lx_queue);
+ }
+
+ return r;
+}
+
+void dump_rtlx(void)
+{
+ int i;
+
+ printk("id 0x%lx state %d\n", rtlx->id, rtlx->state);
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ struct rtlx_channel *chan = &rtlx->channel[i];
+
+ printk(" rt_state %d lx_state %d buffer_size %d\n",
+ chan->rt_state, chan->lx_state, chan->buffer_size);
+
+ printk(" rt_read %d rt_write %d\n",
+ chan->rt_read, chan->rt_write);
+
+ printk(" lx_read %d lx_write %d\n",
+ chan->lx_read, chan->lx_write);
+
+ printk(" rt_buffer <%s>\n", chan->rt_buffer);
+ printk(" lx_buffer <%s>\n", chan->lx_buffer);
+ }
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+ int i;
+
+ if (rtlxi->id != RTLX_ID) {
+ printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi);
+ return (-ENOEXEC);
+ }
+
+ /* initialise the wait queues */
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ init_waitqueue_head(&channel_wqs[i].rt_queue);
+ init_waitqueue_head(&channel_wqs[i].lx_queue);
+ }
+
+ /* set up for interrupt handling */
+ memset(&irq, 0, sizeof(struct irqaction));
+
+ if (cpu_has_vint) {
+ set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ }
+
+ irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+ irq.handler = rtlx_interrupt;
+ irq.flags = SA_INTERRUPT;
+ irq.name = "RTLX";
+ irq.dev_id = rtlx;
+ setup_irq(irq_num, &irq);
+
+ rtlx = rtlxi;
+ return (0);
+}
+
+/* only allow one open process at a time to open each channel */
+static int rtlx_open(struct inode *inode, struct file *filp)
+{
+ int minor, ret;
+ struct rtlx_channel *chan;
+
+ /* assume only 1 device at the mo. */
+ minor = MINOR(inode->i_rdev);
+
+ if (rtlx == NULL) {
+ struct rtlx_info **p;
+ if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+ printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n");
+ return (-EFAULT);
+ }
+
+ if (*p == NULL) {
+ printk(" vpe_shared %p %p\n", p, *p);
+ return (-EFAULT);
+ }
+
+ if ((ret = rtlx_init(*p)) < 0)
+ return (ret);
+ }
+
+ chan = &rtlx->channel[minor];
+
+ /* already open? */
+ if (chan->lx_state == RTLX_STATE_OPENED)
+ return (-EBUSY);
+
+ chan->lx_state = RTLX_STATE_OPENED;
+ return (0);
+}
+
+static int rtlx_release(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED;
+ return (0);
+}
+
+static unsigned int rtlx_poll(struct file *file, poll_table * wait)
+{
+ int minor;
+ unsigned int mask = 0;
+ struct rtlx_channel *chan;
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ chan = &rtlx->channel[minor];
+
+ poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+ poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+ /* data available to read? */
+ if (chan->lx_read != chan->lx_write)
+ mask |= POLLIN | POLLRDNORM;
+
+ /* space to write */
+ if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size))
+ mask |= POLLOUT | POLLWRNORM;
+
+ return (mask);
+}
+
+static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count,
+ loff_t * ppos)
+{
+ size_t fl = 0L;
+ int minor;
+ struct rtlx_channel *lx;
+ DECLARE_WAITQUEUE(wait, current);
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ lx = &rtlx->channel[minor];
+
+ /* data available? */
+ if (lx->lx_write == lx->lx_read) {
+ if (file->f_flags & O_NONBLOCK)
+ return (0); // -EAGAIN makes cat whinge
+
+ /* go to sleep */
+ add_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (lx->lx_write == lx->lx_read)
+ schedule();
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+
+ /* back running */
+ }
+
+ /* find out how much in total */
+ count = min( count,
+ (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size);
+
+ /* then how much from the read pointer onwards */
+ fl = min( count, (size_t)lx->buffer_size - lx->lx_read);
+
+ copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl);
+
+ /* and if there is anything left at the beginning of the buffer */
+ if ( count - fl )
+ copy_to_user (buffer + fl, lx->lx_buffer, count - fl);
+
+ /* update the index */
+ lx->lx_read += count;
+ lx->lx_read %= lx->buffer_size;
+
+ return (count);
+}
+
+static inline int spacefree(int read, int write, int size)
+{
+ if (read == write) {
+ /* never fill the buffer completely, so indexes are always equal if empty
+ and only empty, or !equal if data available */
+ return (size - 1);
+ }
+
+ return ((read + size - write) % size) - 1;
+}
+
+static ssize_t rtlx_write(struct file *file, const char __user * buffer,
+ size_t count, loff_t * ppos)
+{
+ int minor;
+ struct rtlx_channel *rt;
+ size_t fl;
+ DECLARE_WAITQUEUE(wait, current);
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ rt = &rtlx->channel[minor];
+
+ /* any space left... */
+ if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) {
+
+ if (file->f_flags & O_NONBLOCK)
+ return (-EAGAIN);
+
+ add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size))
+ schedule();
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+ }
+
+ /* total number of bytes to copy */
+ count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) );
+
+ /* first bit from write pointer to the end of the buffer, or count */
+ fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+ copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl);
+
+ /* if there's any left copy to the beginning of the buffer */
+ if( count - fl )
+ copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+
+ rt->rt_write += count;
+ rt->rt_write %= rt->buffer_size;
+
+ return(count);
+}
+
+static struct file_operations rtlx_fops = {
+ .owner = THIS_MODULE,
+ .open = rtlx_open,
+ .release = rtlx_release,
+ .write = rtlx_write,
+ .read = rtlx_read,
+ .poll = rtlx_poll
+};
+
+static int rtlx_module_init(void)
+{
+ if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) {
+ printk("rtlx_module_init: unable to register device\n");
+ return (-EBUSY);
+ }
+
+ if (major == 0)
+ major = RTLX_MAJOR;
+
+ return (0);
+}
+
+static void rtlx_module_exit(void)
+{
+ unregister_chrdev(major, module_name);
+}
+
+module_init(rtlx_module_init);
+module_exit(rtlx_module_exit);
+MODULE_DESCRIPTION("MIPS RTLX");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 17b5030..4dd8e8b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -578,7 +578,7 @@
sys sys_fremovexattr 2 /* 4235 */
sys sys_tkill 2
sys sys_sendfile64 5
- sys sys_futex 2
+ sys sys_futex 6
sys sys_sched_setaffinity 3
sys sys_sched_getaffinity 3 /* 4240 */
sys sys_io_setup 2
@@ -587,7 +587,7 @@
sys sys_io_submit 3
sys sys_io_cancel 3 /* 4245 */
sys sys_exit_group 1
- sys sys_lookup_dcookie 3
+ sys sys_lookup_dcookie 4
sys sys_epoll_create 1
sys sys_epoll_ctl 4
sys sys_epoll_wait 3 /* 4250 */
@@ -618,12 +618,15 @@
sys sys_mq_notify 2 /* 4275 */
sys sys_mq_getsetattr 3
sys sys_ni_syscall 0 /* sys_vserver */
- sys sys_waitid 4
+ sys sys_waitid 5
sys sys_ni_syscall 0 /* available, was setaltroot */
- sys sys_add_key 5
+ sys sys_add_key 5 /* 4280 */
sys sys_request_key 4
sys sys_keyctl 5
-
+ sys sys_set_thread_area 1
+ sys sys_inotify_init 0
+ sys sys_inotify_add_watch 3 /* 4285 */
+ sys sys_inotify_rm_watch 2
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index ffb22a2..9085838 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -449,3 +449,7 @@
PTR sys_add_key
PTR sys_request_key /* 5240 */
PTR sys_keyctl
+ PTR sys_set_thread_area
+ PTR sys_inotify_init
+ PTR sys_inotify_add_watch
+ PTR sys_inotify_rm_watch /* 5245 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e52049c..7e66eb8 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -176,7 +176,7 @@
PTR sys_fork
PTR sys32_execve
PTR sys_exit
- PTR sys32_wait4
+ PTR compat_sys_wait4
PTR sys_kill /* 6060 */
PTR sys32_newuname
PTR sys_semget
@@ -216,7 +216,7 @@
PTR compat_sys_getrusage
PTR sys32_sysinfo
PTR compat_sys_times
- PTR sys_ptrace
+ PTR sys32_ptrace
PTR sys_getuid /* 6100 */
PTR sys_syslog
PTR sys_getgid
@@ -243,14 +243,14 @@
PTR sys_capget
PTR sys_capset
PTR sys32_rt_sigpending /* 6125 */
- PTR compat_sys_rt_sigtimedwait
- PTR sys32_rt_sigqueueinfo
+ PTR sysn32_rt_sigtimedwait
+ PTR sys_rt_sigqueueinfo
PTR sys32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
PTR sys_mknod
PTR sys32_personality
- PTR sys_ustat
+ PTR sys32_ustat
PTR compat_sys_statfs
PTR compat_sys_fstatfs /* 6135 */
PTR sys_sysfs
@@ -329,7 +329,7 @@
PTR sys_epoll_wait
PTR sys_remap_file_pages /* 6210 */
PTR sysn32_rt_sigreturn
- PTR sys_fcntl
+ PTR compat_sys_fcntl64
PTR sys_set_tid_address
PTR sys_restart_syscall
PTR sys_semtimedop /* 6215 */
@@ -337,15 +337,15 @@
PTR compat_sys_statfs64
PTR compat_sys_fstatfs64
PTR sys_sendfile64
- PTR sys_timer_create /* 6220 */
- PTR sys_timer_settime
- PTR sys_timer_gettime
+ PTR sys32_timer_create /* 6220 */
+ PTR compat_sys_timer_settime
+ PTR compat_sys_timer_gettime
PTR sys_timer_getoverrun
PTR sys_timer_delete
- PTR sys_clock_settime /* 6225 */
- PTR sys_clock_gettime
- PTR sys_clock_getres
- PTR sys_clock_nanosleep
+ PTR compat_sys_clock_settime /* 6225 */
+ PTR compat_sys_clock_gettime
+ PTR compat_sys_clock_getres
+ PTR compat_sys_clock_nanosleep
PTR sys_tgkill
PTR compat_sys_utimes /* 6230 */
PTR sys_ni_syscall /* sys_mbind */
@@ -358,8 +358,12 @@
PTR compat_sys_mq_notify
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* 6240, sys_vserver */
- PTR sys_waitid
+ PTR sysn32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key
PTR sys_request_key
PTR sys_keyctl /* 6245 */
+ PTR sys_set_thread_area
+ PTR sys_inotify_init
+ PTR sys_inotify_add_watch
+ PTR sys_inotify_rm_watch
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 739f399..5a16401 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -316,13 +316,13 @@
PTR sys_vhangup
PTR sys_ni_syscall /* was sys_idle */
PTR sys_ni_syscall /* sys_vm86 */
- PTR sys32_wait4
+ PTR compat_sys_wait4
PTR sys_swapoff /* 4115 */
PTR sys32_sysinfo
PTR sys32_ipc
PTR sys_fsync
PTR sys32_sigreturn
- PTR sys_clone /* 4120 */
+ PTR sys32_clone /* 4120 */
PTR sys_setdomainname
PTR sys32_newuname
PTR sys_ni_syscall /* sys_modify_ldt */
@@ -391,7 +391,7 @@
PTR sys_getresuid
PTR sys_ni_syscall /* was query_module */
PTR sys_poll
- PTR sys_nfsservctl
+ PTR compat_sys_nfsservctl
PTR sys_setresgid /* 4190 */
PTR sys_getresgid
PTR sys_prctl
@@ -459,7 +459,7 @@
PTR sys_fadvise64_64
PTR compat_sys_statfs64 /* 4255 */
PTR compat_sys_fstatfs64
- PTR sys_timer_create
+ PTR sys32_timer_create
PTR compat_sys_timer_settime
PTR compat_sys_timer_gettime
PTR sys_timer_getoverrun /* 4260 */
@@ -480,9 +480,13 @@
PTR compat_sys_mq_notify /* 4275 */
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* sys_vserver */
- PTR sys_waitid
+ PTR sys32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key /* 4280 */
PTR sys_request_key
PTR sys_keyctl
+ PTR sys_set_thread_area
+ PTR sys_inotify_init
+ PTR sys_inotify_add_watch /* 4285 */
+ PTR sys_inotify_rm_watch
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
index 9c40fe5..1265358 100644
--- a/arch/mips/kernel/semaphore.c
+++ b/arch/mips/kernel/semaphore.c
@@ -42,24 +42,28 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
- "1: ll %0, %2 \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 # __sem_update_count \n"
" sra %1, %0, 31 \n"
" not %1 \n"
" and %1, %0, %1 \n"
- " add %1, %1, %3 \n"
+ " addu %1, %1, %3 \n"
" sc %1, %2 \n"
" beqzl %1, 1b \n"
+ " .set mips0 \n"
: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
: "r" (incr), "m" (sem->count));
} else if (cpu_has_llsc) {
__asm__ __volatile__(
- "1: ll %0, %2 \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 # __sem_update_count \n"
" sra %1, %0, 31 \n"
" not %1 \n"
" and %1, %0, %1 \n"
- " add %1, %1, %3 \n"
+ " addu %1, %1, %3 \n"
" sc %1, %2 \n"
" beqz %1, 1b \n"
+ " .set mips0 \n"
: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
: "r" (incr), "m" (sem->count));
} else {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 12b531c..d86affa 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -37,12 +37,13 @@
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
+#include <asm/cache.h>
#include <asm/cpu.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/system.h>
-struct cpuinfo_mips cpu_data[NR_CPUS];
+struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_data);
@@ -62,8 +63,8 @@
*
* These are initialized so they are in the .data section
*/
-unsigned long mips_machtype = MACH_UNKNOWN;
-unsigned long mips_machgroup = MACH_GROUP_UNKNOWN;
+unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
+unsigned long mips_machgroup __read_mostly = MACH_GROUP_UNKNOWN;
EXPORT_SYMBOL(mips_machtype);
EXPORT_SYMBOL(mips_machgroup);
@@ -77,7 +78,7 @@
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
*/
-const unsigned long mips_io_port_base = -1;
+const unsigned long mips_io_port_base __read_mostly = -1;
EXPORT_SYMBOL(mips_io_port_base);
/*
@@ -510,31 +511,7 @@
#undef MAXMEM
#undef MAXMEM_PFN
-static int __initdata earlyinit_debug;
-
-static int __init earlyinit_debug_setup(char *str)
-{
- earlyinit_debug = 1;
- return 1;
-}
-__setup("earlyinit_debug", earlyinit_debug_setup);
-
-extern initcall_t __earlyinitcall_start, __earlyinitcall_end;
-
-static void __init do_earlyinitcalls(void)
-{
- initcall_t *call, *start, *end;
-
- start = &__earlyinitcall_start;
- end = &__earlyinitcall_end;
-
- for (call = start; call < end; call++) {
- if (earlyinit_debug)
- printk("calling earlyinitcall 0x%p\n", *call);
-
- (*call)();
- }
-}
+extern void plat_setup(void);
void __init setup_arch(char **cmdline_p)
{
@@ -551,7 +528,7 @@
#endif
/* call board setup routine */
- do_earlyinitcalls();
+ plat_setup();
strlcpy(command_line, arcs_cmdline, sizeof(command_line));
strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
@@ -573,3 +550,12 @@
}
__setup("nofpu", fpu_disable);
+
+int __init dsp_disable(char *s)
+{
+ cpu_data[0].ases &= ~MIPS_ASE_DSP;
+
+ return 1;
+}
+
+__setup("nodsp", dsp_disable);
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index f9234df..0f66ae58 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -8,13 +8,14 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
+#include <linux/config.h>
+
static inline int
setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
{
int err = 0;
err |= __put_user(regs->cp0_epc, &sc->sc_pc);
- err |= __put_user(regs->cp0_status, &sc->sc_status);
#define save_gp_reg(i) do { \
err |= __put_user(regs->regs[i], &sc->sc_regs[i]); \
@@ -30,10 +31,32 @@
save_gp_reg(31);
#undef save_gp_reg
+#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
- err |= __put_user(regs->cp0_cause, &sc->sc_cause);
- err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+ if (cpu_has_dsp) {
+ err |= __put_user(mfhi1(), &sc->sc_hi1);
+ err |= __put_user(mflo1(), &sc->sc_lo1);
+ err |= __put_user(mfhi2(), &sc->sc_hi2);
+ err |= __put_user(mflo2(), &sc->sc_lo2);
+ err |= __put_user(mfhi3(), &sc->sc_hi3);
+ err |= __put_user(mflo3(), &sc->sc_lo3);
+ err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+ }
+#endif
+#ifdef CONFIG_64BIT
+ err |= __put_user(regs->hi, &sc->sc_hi[0]);
+ err |= __put_user(regs->lo, &sc->sc_lo[0]);
+ if (cpu_has_dsp) {
+ err |= __put_user(mfhi1(), &sc->sc_hi[1]);
+ err |= __put_user(mflo1(), &sc->sc_lo[1]);
+ err |= __put_user(mfhi2(), &sc->sc_hi[2]);
+ err |= __put_user(mflo2(), &sc->sc_lo[2]);
+ err |= __put_user(mfhi3(), &sc->sc_hi[3]);
+ err |= __put_user(mflo3(), &sc->sc_lo[3]);
+ err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+ }
+#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
@@ -61,15 +84,40 @@
static inline int
restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
{
- int err = 0;
unsigned int used_math;
+ unsigned long treg;
+ int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
+ if (cpu_has_dsp) {
+ err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+ err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+ err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+ err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+ }
+#endif
+#ifdef CONFIG_64BIT
+ err |= __get_user(regs->hi, &sc->sc_hi[0]);
+ err |= __get_user(regs->lo, &sc->sc_lo[0]);
+ if (cpu_has_dsp) {
+ err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+ }
+#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
@@ -112,7 +160,7 @@
static inline void *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
- unsigned long sp, almask;
+ unsigned long sp;
/* Default to using normal stack */
sp = regs->regs[29];
@@ -128,10 +176,32 @@
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- almask = ~(PLAT_TRAMPOLINE_STUFF_LINE - 1);
- else
- almask = ALMASK;
+ return (void *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+}
- return (void *)((sp - frame_size) & almask);
+static inline int install_sigtramp(unsigned int __user *tramp,
+ unsigned int syscall)
+{
+ int err;
+
+ /*
+ * Set up the return code ...
+ *
+ * li v0, __NR__foo_sigreturn
+ * syscall
+ */
+
+ err = __put_user(0x24020000 + syscall, tramp + 0);
+ err |= __put_user(0x0000000c , tramp + 1);
+ if (ICACHE_REFILLS_WORKAROUND_WAR) {
+ err |= __put_user(0, tramp + 2);
+ err |= __put_user(0, tramp + 3);
+ err |= __put_user(0, tramp + 4);
+ err |= __put_user(0, tramp + 5);
+ err |= __put_user(0, tramp + 6);
+ err |= __put_user(0, tramp + 7);
+ }
+ flush_cache_sigtramp((unsigned long) tramp);
+
+ return err;
}
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 0209c1d..9202a17 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -8,6 +8,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/config.h>
+#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/personality.h>
@@ -21,6 +22,7 @@
#include <linux/unistd.h>
#include <linux/compiler.h>
+#include <asm/abi.h>
#include <asm/asm.h>
#include <linux/bitops.h>
#include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
+#include <asm/war.h>
#include "signal-common.h"
@@ -36,7 +39,7 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-static int do_signal(sigset_t *oldset, struct pt_regs *regs);
+int do_signal(sigset_t *oldset, struct pt_regs *regs);
/*
* Atomically swap in the new signal mask, and wait for a signal.
@@ -47,9 +50,10 @@
__attribute_used__ noinline static int
_sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t *uset, saveset, newset;
+ sigset_t saveset, newset;
+ sigset_t __user *uset;
- uset = (sigset_t *) regs.regs[4];
+ uset = (sigset_t __user *) regs.regs[4];
if (copy_from_user(&newset, uset, sizeof(sigset_t)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -75,7 +79,8 @@
__attribute_used__ noinline static int
_sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t *unewset, saveset, newset;
+ sigset_t saveset, newset;
+ sigset_t __user *unewset;
size_t sigsetsize;
/* XXX Don't preclude handling different sized sigset_t's. */
@@ -83,7 +88,7 @@
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
- unewset = (sigset_t *) regs.regs[4];
+ unewset = (sigset_t __user *) regs.regs[4];
if (copy_from_user(&newset, unewset, sizeof(newset)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -147,33 +152,46 @@
asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs)
{
- const stack_t *uss = (const stack_t *) regs.regs[4];
- stack_t *uoss = (stack_t *) regs.regs[5];
+ const stack_t __user *uss = (const stack_t __user *) regs.regs[4];
+ stack_t __user *uoss = (stack_t __user *) regs.regs[5];
unsigned long usp = regs.regs[29];
return do_sigaltstack(uss, uoss, usp);
}
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
+/*
+ * Horribly complicated - with the bloody RM9000 workarounds enabled
+ * the signal trampolines is moving to the end of the structure so we can
+ * increase the alignment without breaking software compatibility.
+ */
#ifdef CONFIG_TRAD_SIGNALS
struct sigframe {
u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_code[2] __tramp; /* signal trampoline */
- struct sigcontext sf_sc __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_pad[2];
+#else
+ u32 sf_code[2]; /* signal trampoline */
+#endif
+ struct sigcontext sf_sc;
sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
#endif
struct rt_sigframe {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2] __tramp; /* signal trampoline */
- struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_pad[2];
+#else
+ u32 rs_code[2]; /* signal trampoline */
+#endif
+ struct siginfo rs_info;
struct ucontext rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
#ifdef CONFIG_TRAD_SIGNALS
@@ -214,7 +232,7 @@
badframe:
force_sig(SIGSEGV, current);
}
-#endif
+#endif /* CONFIG_TRAD_SIGNALS */
save_static_function(sys_rt_sigreturn);
__attribute_used__ noinline static void
@@ -260,7 +278,7 @@
}
#ifdef CONFIG_TRAD_SIGNALS
-static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
struct sigframe *frame;
@@ -270,17 +288,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- /*
- * Set up the return code ...
- *
- * li v0, __NR_sigreturn
- * syscall
- */
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- __clear_user(frame->sf_code, PLAT_TRAMPOLINE_STUFF_LINE);
- err |= __put_user(0x24020000 + __NR_sigreturn, frame->sf_code + 0);
- err |= __put_user(0x0000000c , frame->sf_code + 1);
- flush_cache_sigtramp((unsigned long) frame->sf_code);
+ install_sigtramp(frame->sf_code, __NR_sigreturn);
err |= setup_sigcontext(regs, &frame->sf_sc);
err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
@@ -309,14 +317,15 @@
current->comm, current->pid,
frame, regs->cp0_epc, frame->regs[31]);
#endif
- return;
+ return 1;
give_sigsegv:
force_sigsegv(signr, current);
+ return 0;
}
#endif
-static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe *frame;
@@ -326,17 +335,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- /*
- * Set up the return code ...
- *
- * li v0, __NR_rt_sigreturn
- * syscall
- */
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- __clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
- err |= __put_user(0x24020000 + __NR_rt_sigreturn, frame->rs_code + 0);
- err |= __put_user(0x0000000c , frame->rs_code + 1);
- flush_cache_sigtramp((unsigned long) frame->rs_code);
+ install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -378,18 +377,21 @@
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return;
+ return 1;
give_sigsegv:
force_sigsegv(signr, current);
+ return 0;
}
extern void setup_rt_frame_n32(struct k_sigaction * ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info);
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
{
+ int ret;
+
switch(regs->regs[0]) {
case ERESTART_RESTARTBLOCK:
case ERESTARTNOHAND:
@@ -408,22 +410,10 @@
regs->regs[0] = 0; /* Don't deal with this again. */
-#ifdef CONFIG_TRAD_SIGNALS
- if (ka->sa.sa_flags & SA_SIGINFO) {
-#else
- if (1) {
-#endif
-#ifdef CONFIG_MIPS32_N32
- if ((current->thread.mflags & MF_ABI_MASK) == MF_N32)
- setup_rt_frame_n32 (ka, regs, sig, oldset, info);
- else
-#endif
- setup_rt_frame(ka, regs, sig, oldset, info);
- }
-#ifdef CONFIG_TRAD_SIGNALS
+ if (sig_uses_siginfo(ka))
+ ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
else
- setup_frame(ka, regs, sig, oldset);
-#endif
+ ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
@@ -431,23 +421,16 @@
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ return ret;
}
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-extern int do_irix_signal(sigset_t *oldset, struct pt_regs *regs);
-
-static int do_signal(sigset_t *oldset, struct pt_regs *regs)
+int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
-#ifdef CONFIG_BINFMT_ELF32
- if ((current->thread.mflags & MF_ABI_MASK) == MF_O32) {
- return do_signal32(oldset, regs);
- }
-#endif
-
/*
* We want the common case to go fast, which is why we may in certain
* cases get here from kernel mode. Just return without doing anything
@@ -463,10 +446,8 @@
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
+ if (signr > 0)
+ return handle_signal(signr, &info, &ka, oldset, regs);
no_signal:
/*
@@ -499,18 +480,6 @@
{
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING) {
-#ifdef CONFIG_BINFMT_ELF32
- if (likely((current->thread.mflags & MF_ABI_MASK) == MF_O32)) {
- do_signal32(oldset, regs);
- return;
- }
-#endif
-#ifdef CONFIG_BINFMT_IRIX
- if (unlikely(current->personality != PER_LINUX)) {
- do_irix_signal(oldset, regs);
- return;
- }
-#endif
- do_signal(oldset, regs);
+ current->thread.abi->do_signal(oldset, regs);
}
}
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 8ddfbd8..dbe8213 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -7,6 +7,7 @@
* Copyright (C) 1994 - 2000 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
+#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -21,6 +22,7 @@
#include <linux/suspend.h>
#include <linux/compiler.h>
+#include <asm/abi.h>
#include <asm/asm.h>
#include <linux/bitops.h>
#include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
#include <asm/ucontext.h>
#include <asm/system.h>
#include <asm/fpu.h>
+#include <asm/war.h>
#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3)
@@ -76,8 +79,10 @@
/* POSIX.1b timers */
struct {
- unsigned int _timer1;
- unsigned int _timer2;
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ compat_sigval_t _sigval;/* same as below */
+ int _sys_private; /* not to be passed to user */
} _timer;
/* POSIX.1b signals */
@@ -259,11 +264,12 @@
if (act) {
old_sigset_t mask;
+ s32 handler;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
- err |= __get_user((u32)(u64)new_ka.sa.sa_handler,
- &act->sa_handler);
+ err |= __get_user(handler, &act->sa_handler);
+ new_ka.sa.sa_handler = (void*)(s64)handler;
err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
err |= __get_user(mask, &act->sa_mask.sig[0]);
if (err)
@@ -331,8 +337,9 @@
static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
{
+ u32 used_math;
int err = 0;
- __u32 used_math;
+ s32 treg;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
@@ -340,6 +347,15 @@
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
+ if (cpu_has_dsp) {
+ err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+ err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+ err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+ err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+ }
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
@@ -378,16 +394,30 @@
struct sigframe {
u32 sf_ass[4]; /* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_pad[2];
+#else
u32 sf_code[2]; /* signal trampoline */
+#endif
struct sigcontext32 sf_sc;
sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
struct rt_sigframe32 {
u32 rs_ass[4]; /* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_pad[2];
+#else
u32 rs_code[2]; /* signal trampoline */
+#endif
compat_siginfo_t rs_info;
struct ucontext32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */
+#endif
};
int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
@@ -411,6 +441,11 @@
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
switch (from->si_code >> 16) {
+ case __SI_TIMER >> 16:
+ err |= __put_user(from->si_tid, &to->si_tid);
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
case __SI_CHLD >> 16:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
@@ -480,6 +515,7 @@
_sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
struct rt_sigframe32 *frame;
+ mm_segment_t old_fs;
sigset_t set;
stack_t st;
s32 sp;
@@ -510,7 +546,10 @@
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
+ old_fs = get_fs();
+ set_fs (KERNEL_DS);
do_sigaltstack(&st, NULL, regs.regs[29]);
+ set_fs (old_fs);
/*
* Don't let your children do this ...
@@ -550,8 +589,15 @@
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
- err |= __put_user(regs->cp0_cause, &sc->sc_cause);
- err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+ if (cpu_has_dsp) {
+ err |= __put_user(rddsp(DSP_MASK), &sc->sc_hi1);
+ err |= __put_user(mfhi1(), &sc->sc_hi1);
+ err |= __put_user(mflo1(), &sc->sc_lo1);
+ err |= __put_user(mfhi2(), &sc->sc_hi2);
+ err |= __put_user(mflo2(), &sc->sc_lo2);
+ err |= __put_user(mfhi3(), &sc->sc_hi3);
+ err |= __put_user(mflo3(), &sc->sc_lo3);
+ }
err |= __put_user(!!used_math(), &sc->sc_used_math);
@@ -601,7 +647,7 @@
return (void *)((sp - frame_size) & ALMASK);
}
-static inline void setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
struct sigframe *frame;
@@ -654,9 +700,7 @@
force_sigsegv(signr, current);
}
-static inline void setup_rt_frame(struct k_sigaction * ka,
- struct pt_regs *regs, int signr,
- sigset_t *set, siginfo_t *info)
+void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe32 *frame;
int err = 0;
@@ -725,9 +769,11 @@
force_sigsegv(signr, current);
}
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
{
+ int ret;
+
switch (regs->regs[0]) {
case ERESTART_RESTARTBLOCK:
case ERESTARTNOHAND:
@@ -747,9 +793,9 @@
regs->regs[0] = 0; /* Don't deal with this again. */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(ka, regs, sig, oldset, info);
+ ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
else
- setup_frame(ka, regs, sig, oldset);
+ ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
@@ -757,6 +803,8 @@
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ return ret;
}
int do_signal32(sigset_t *oldset, struct pt_regs *regs)
@@ -780,10 +828,8 @@
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
+ if (signr > 0)
+ return handle_signal(signr, &info, &ka, oldset, regs);
no_signal:
/*
@@ -819,12 +865,13 @@
goto out;
if (act) {
+ s32 handler;
int err = 0;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
- err |= __get_user((u32)(u64)new_sa.sa.sa_handler,
- &act->sa_handler);
+ err |= __get_user(handler, &act->sa_handler);
+ new_sa.sa.sa_handler = (void*)(s64)handler;
err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags);
err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask);
if (err)
@@ -902,3 +949,30 @@
set_fs (old_fs);
return ret;
}
+
+asmlinkage long
+sys32_waitid(int which, compat_pid_t pid,
+ compat_siginfo_t __user *uinfo, int options,
+ struct compat_rusage __user *uru)
+{
+ siginfo_t info;
+ struct rusage ru;
+ long ret;
+ mm_segment_t old_fs = get_fs();
+
+ info.si_signo = 0;
+ set_fs (KERNEL_DS);
+ ret = sys_waitid(which, pid, (siginfo_t __user *) &info, options,
+ uru ? (struct rusage __user *) &ru : NULL);
+ set_fs (old_fs);
+
+ if (ret < 0 || info.si_signo == 0)
+ return ret;
+
+ if (uru && (ret = put_compat_rusage(&ru, uru)))
+ return ret;
+
+ BUG_ON(info.si_code & __SI_MASK);
+ info.si_code |= __SI_CHLD;
+ return copy_siginfo_to_user32(uinfo, &info);
+}
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 3544208..ec61b26 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -15,6 +15,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/cache.h>
+#include <linux/sched.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -36,6 +38,7 @@
#include <asm/system.h>
#include <asm/fpu.h>
#include <asm/cpu-features.h>
+#include <asm/war.h>
#include "signal-common.h"
@@ -62,17 +65,18 @@
sigset_t uc_sigmask; /* mask last for extensibility */
};
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
struct rt_sigframe_n32 {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2] __tramp; /* signal trampoline */
- struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_pad[2];
+#else
+ u32 rs_code[2]; /* signal trampoline */
+#endif
+ struct siginfo rs_info;
struct ucontextn32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
save_static_function(sysn32_rt_sigreturn);
@@ -126,7 +130,7 @@
force_sig(SIGSEGV, current);
}
-void setup_rt_frame_n32(struct k_sigaction * ka,
+int setup_rt_frame_n32(struct k_sigaction * ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe_n32 *frame;
@@ -137,17 +141,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- /*
- * Set up the return code ...
- *
- * li v0, __NR_rt_sigreturn
- * syscall
- */
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- __clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
- err |= __put_user(0x24020000 + __NR_N32_rt_sigreturn, frame->rs_code + 0);
- err |= __put_user(0x0000000c , frame->rs_code + 1);
- flush_cache_sigtramp((unsigned long) frame->rs_code);
+ install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -190,8 +184,9 @@
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return;
+ return 1;
give_sigsegv:
force_sigsegv(signr, current);
+ return 0;
}
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index af5cd3b..fcacf1a 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -50,7 +50,6 @@
{
struct cache_desc *cd = ¤t_cpu_data.scache;
unsigned long cachesize; /* kB */
- unsigned long bandwidth = 350; /* MB/s */
unsigned long cpu_khz;
/*
@@ -121,7 +120,19 @@
* or are or have executed.
*
* You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
+ * hardware interrupt handler or from a bottom half handler:
+ *
+ * CPU A CPU B
+ * Disable interrupts
+ * smp_call_function()
+ * Take call_lock
+ * Send IPIs
+ * Wait for all cpus to acknowledge IPI
+ * CPU A has not responded, spin waiting
+ * for cpu A to respond, holding call_lock
+ * smp_call_function()
+ * Spin waiting for call_lock
+ * Deadlock Deadlock
*/
int smp_call_function (void (*func) (void *info), void *info, int retry,
int wait)
@@ -130,6 +141,11 @@
int i, cpus = num_online_cpus() - 1;
int cpu = smp_processor_id();
+ /*
+ * Can die spectacularly if this CPU isn't yet marked online
+ */
+ BUG_ON(!cpu_online(cpu));
+
if (!cpus)
return 0;
@@ -214,7 +230,6 @@
/* called from main before smp_init() */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
- cpu_data[0].udelay_val = loops_per_jiffy;
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
@@ -236,44 +251,32 @@
}
/*
- * Startup the CPU with this logical number
- */
-static int __init do_boot_cpu(int cpu)
-{
- struct task_struct *idle;
-
- /*
- * The following code is purely to make sure
- * Linux can schedule processes on this slave.
- */
- idle = fork_idle(cpu);
- if (IS_ERR(idle))
- panic("failed fork for CPU %d\n", cpu);
-
- prom_boot_secondary(cpu, idle);
-
- /* XXXKW timeout */
- while (!cpu_isset(cpu, cpu_callin_map))
- udelay(100);
-
- cpu_set(cpu, cpu_online_map);
-
- return 0;
-}
-
-/*
* Called once for each "cpu_possible(cpu)". Needs to spin up the cpu
* and keep control until "cpu_online(cpu)" is set. Note: cpu is
* physical, not logical.
*/
int __devinit __cpu_up(unsigned int cpu)
{
- int ret;
+ struct task_struct *idle;
- /* Processor goes to start_secondary(), sets online flag */
- ret = do_boot_cpu(cpu);
- if (ret < 0)
- return ret;
+ /*
+ * Processor goes to start_secondary(), sets online flag
+ * The following code is purely to make sure
+ * Linux can schedule processes on this slave.
+ */
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle))
+ panic(KERN_ERR "Fork failed for CPU %d", cpu);
+
+ prom_boot_secondary(cpu, idle);
+
+ /*
+ * Trust is futile. We should really have timeouts ...
+ */
+ while (!cpu_isset(cpu, cpu_callin_map))
+ udelay(100);
+
+ cpu_set(cpu, cpu_online_map);
return 0;
}
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c
new file mode 100644
index 0000000..d429544
--- /dev/null
+++ b/arch/mips/kernel/smp_mt.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * Elizabeth Clarke (beth@mips.com)
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/mips-boards/maltaint.h>
+
+#define MIPS_CPU_IPI_RESCHED_IRQ 0
+#define MIPS_CPU_IPI_CALL_IRQ 1
+
+static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
+
+#if 0
+static void dump_mtregisters(int vpe, int tc)
+{
+ printk("vpe %d tc %d\n", vpe, tc);
+
+ settc(tc);
+
+ printk(" c0 status 0x%lx\n", read_vpe_c0_status());
+ printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol());
+ printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0());
+ printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus());
+ printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+ printk(" tcbind 0x%lx\n", read_tc_c0_tcbind());
+ printk(" tchalt 0x%lx\n", read_tc_c0_tchalt());
+}
+#endif
+
+void __init sanitize_tlb_entries(void)
+{
+ int i, tlbsiz;
+ unsigned long mvpconf0, ncpu;
+
+ if (!cpu_has_mipsmt)
+ return;
+
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* Disable TLB sharing */
+ clear_c0_mvpcontrol(MVPCONTROL_STLB);
+
+ mvpconf0 = read_c0_mvpconf0();
+
+ printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0,
+ (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT,
+ (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT);
+
+ tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT;
+ ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+ printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu);
+
+ if (tlbsiz > 0) {
+ /* share them out across the vpe's */
+ tlbsiz /= ncpu;
+
+ printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz);
+
+ for (i = 0; i < ncpu; i++) {
+ settc(i);
+
+ if (i == 0)
+ write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25));
+ else
+ write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) |
+ (tlbsiz << 25));
+ }
+ }
+
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+}
+
+#if 0
+/*
+ * Use c0_MVPConf0 to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ */
+void __init prom_build_cpu_map(void)
+{
+ int i, num, ncpus;
+
+ cpus_clear(phys_cpu_present_map);
+
+ /* assume we boot on cpu 0.... */
+ cpu_set(0, phys_cpu_present_map);
+ __cpu_number_map[0] = 0;
+ __cpu_logical_map[0] = 0;
+
+ if (cpu_has_mipsmt) {
+ ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1;
+ for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+
+ printk(KERN_INFO "%i available secondary CPU(s)\n", num);
+ }
+}
+#endif
+
+static void ipi_resched_dispatch (struct pt_regs *regs)
+{
+ do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+}
+
+static void ipi_call_dispatch (struct pt_regs *regs)
+{
+ do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+}
+
+irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ return IRQ_HANDLED;
+}
+
+irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ smp_call_function_interrupt();
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+ .handler = ipi_resched_interrupt,
+ .flags = SA_INTERRUPT,
+ .name = "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+ .handler = ipi_call_interrupt,
+ .flags = SA_INTERRUPT,
+ .name = "IPI_call"
+};
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned long val;
+ int i, num;
+
+ if (!cpu_has_mipsmt)
+ return;
+
+ /* disable MT so we can configure */
+ dvpe();
+ dmt();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ val = read_c0_mvpconf0();
+
+ /* we'll always have more TC's than VPE's, so loop setting everything
+ to a sensible state */
+ for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) {
+ settc(i);
+
+ /* VPE's */
+ if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) {
+
+ /* deactivate all but vpe0 */
+ if (i != 0) {
+ unsigned long tmp = read_vpe_c0_vpeconf0();
+
+ tmp &= ~VPECONF0_VPA;
+
+ /* master VPE */
+ tmp |= VPECONF0_MVP;
+ write_vpe_c0_vpeconf0(tmp);
+
+ /* Record this as available CPU */
+ if (i < max_cpus) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+ }
+
+ /* disable multi-threading with TC's */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+ if (i != 0) {
+ write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
+ write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config( read_c0_config());
+ }
+
+ }
+
+ /* TC's */
+
+ if (i != 0) {
+ unsigned long tmp;
+
+ /* bind a TC to each VPE, May as well put all excess TC's
+ on the last VPE */
+ if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) )
+ write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) );
+ else {
+ write_tc_c0_tcbind( read_tc_c0_tcbind() | i);
+
+ /* and set XTC */
+ write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT));
+ }
+
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+ }
+ }
+
+ /* Release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* We'll wait until starting the secondaries before starting MVPE */
+
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+
+ /* set up ipi interrupts */
+ if (cpu_has_vint) {
+ set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+ set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+ }
+
+ cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
+
+ setup_irq(cpu_ipi_resched_irq, &irq_resched);
+ setup_irq(cpu_ipi_call_irq, &irq_call);
+
+ /* need to mark IPI's as IRQ_PER_CPU */
+ irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU;
+ irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ * assumes a 1:1 mapping of TC => VPE
+ */
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+ dvpe();
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(cpu);
+
+ /* restart */
+ write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+ /* enable the tc this vpe/cpu will be running */
+ write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A);
+
+ write_tc_c0_tchalt(0);
+
+ /* enable the VPE */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+ /* stack pointer */
+ write_tc_gpr_sp( __KSTK_TOS(idle));
+
+ /* global pointer */
+ write_tc_gpr_gp((unsigned long)idle->thread_info);
+
+ flush_icache_range((unsigned long)idle->thread_info,
+ (unsigned long)idle->thread_info +
+ sizeof(struct thread_info));
+
+ /* finally out of configuration and into chaos */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ evpe(EVPE_ENABLE);
+}
+
+void prom_init_secondary(void)
+{
+ write_c0_status((read_c0_status() & ~ST0_IM ) |
+ (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7));
+}
+
+void prom_smp_finish(void)
+{
+ write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+
+ local_irq_enable();
+}
+
+void prom_cpus_done(void)
+{
+}
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+ int i;
+ unsigned long flags;
+ int vpflags;
+
+ local_irq_save (flags);
+
+ vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */
+
+ switch (action) {
+ case SMP_CALL_FUNCTION:
+ i = C_SW1;
+ break;
+
+ case SMP_RESCHEDULE_YOURSELF:
+ default:
+ i = C_SW0;
+ break;
+ }
+
+ /* 1:1 mapping of vpe and tc... */
+ settc(cpu);
+ write_vpe_c0_cause(read_vpe_c0_cause() | i);
+ evpe(vpflags);
+
+ local_irq_restore(flags);
+}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 21e3e13..ee98eeb 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -7,6 +7,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
+#include <linux/config.h>
#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/linkage.h>
@@ -26,6 +27,7 @@
#include <linux/msg.h>
#include <linux/shm.h>
#include <linux/compiler.h>
+#include <linux/module.h>
#include <asm/branch.h>
#include <asm/cachectl.h>
@@ -56,6 +58,8 @@
unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
+EXPORT_SYMBOL(shm_align_mask);
+
#define COLOUR_ALIGN(addr,pgoff) \
((((addr) + shm_align_mask) & ~shm_align_mask) + \
(((pgoff) << PAGE_SHIFT) & shm_align_mask))
@@ -173,14 +177,28 @@
{
unsigned long clone_flags;
unsigned long newsp;
- int *parent_tidptr, *child_tidptr;
+ int __user *parent_tidptr, *child_tidptr;
clone_flags = regs.regs[4];
newsp = regs.regs[5];
if (!newsp)
newsp = regs.regs[29];
- parent_tidptr = (int *) regs.regs[6];
- child_tidptr = (int *) regs.regs[7];
+ parent_tidptr = (int __user *) regs.regs[6];
+#ifdef CONFIG_32BIT
+ /* We need to fetch the fifth argument off the stack. */
+ child_tidptr = NULL;
+ if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) {
+ int __user *__user *usp = (int __user *__user *) regs.regs[29];
+ if (regs.regs[2] == __NR_syscall) {
+ if (get_user (child_tidptr, &usp[5]))
+ return -EFAULT;
+ }
+ else if (get_user (child_tidptr, &usp[4]))
+ return -EFAULT;
+ }
+#else
+ child_tidptr = (int __user *) regs.regs[8];
+#endif
return do_fork(clone_flags, newsp, ®s, 0,
parent_tidptr, child_tidptr);
}
@@ -242,6 +260,16 @@
return error;
}
+void sys_set_thread_area(unsigned long addr)
+{
+ struct thread_info *ti = current->thread_info;
+
+ ti->tp_value = addr;
+
+ /* If some future MIPS implementation has this register in hardware,
+ * we will need to update it here (and in context switches). */
+}
+
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
{
int tmp, len;
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
index 7ae4af4..52924f8 100644
--- a/arch/mips/kernel/sysirix.c
+++ b/arch/mips/kernel/sysirix.c
@@ -73,32 +73,30 @@
}
/* The prctl commands. */
-#define PR_MAXPROCS 1 /* Tasks/user. */
-#define PR_ISBLOCKED 2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */
-#define PR_MAXPPROCS 5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG 8 /* When task exit's, set signal. */
-#define PR_RESIDENT 9 /* Make task unswappable. */
-#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD 12 /* When parent sleeps with fishes, kill child. */
-#define PR_GETSHMASK 13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE 14 /* Number of share group members. */
-#define PR_COREPID 15 /* Add task pid to name when it core. */
-#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT 17 /* Kill a pthread without prejudice. */
+#define PR_MAXPROCS 1 /* Tasks/user. */
+#define PR_ISBLOCKED 2 /* If blocked, return 1. */
+#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */
+#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */
+#define PR_MAXPPROCS 5 /* Num parallel tasks. */
+#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */
+#define PR_SETEXITSIG 8 /* When task exit's, set signal. */
+#define PR_RESIDENT 9 /* Make task unswappable. */
+#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */
+#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */
+#define PR_TERMCHILD 12 /* Kill child if the parent dies. */
+#define PR_GETSHMASK 13 /* Get the sproc() share mask. */
+#define PR_GETNSHARE 14 /* Number of share group members. */
+#define PR_COREPID 15 /* Add task pid to name when it core. */
+#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */
+#define PR_PTHREADEXIT 17 /* Kill a pthread, only for IRIX 6.[234] */
-asmlinkage int irix_prctl(struct pt_regs *regs)
+asmlinkage int irix_prctl(unsigned option, ...)
{
- unsigned long cmd;
- int error = 0, base = 0;
+ va_list args;
+ int error = 0;
- if (regs->regs[2] == 1000)
- base = 1;
- cmd = regs->regs[base + 4];
- switch (cmd) {
+ va_start(args, option);
+ switch (option) {
case PR_MAXPROCS:
printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
current->comm, current->pid);
@@ -111,7 +109,7 @@
printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
current->comm, current->pid);
read_lock(&tasklist_lock);
- task = find_task_by_pid(regs->regs[base + 5]);
+ task = find_task_by_pid(va_arg(args, pid_t));
error = -ESRCH;
if (error)
error = (task->run_list.next != NULL);
@@ -121,7 +119,7 @@
}
case PR_SETSTACKSIZE: {
- long value = regs->regs[base + 5];
+ long value = va_arg(args, long);
printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
current->comm, current->pid, (unsigned long) value);
@@ -222,24 +220,20 @@
error = -EINVAL;
break;
- case PR_PTHREADEXIT:
- printk("irix_prctl[%s:%d]: Wants PR_PTHREADEXIT\n",
- current->comm, current->pid);
- do_exit(regs->regs[base + 5]);
-
default:
printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
- current->comm, current->pid, (int)cmd);
+ current->comm, current->pid, option);
error = -EINVAL;
break;
}
+ va_end(args);
return error;
}
#undef DEBUG_PROCGRPS
-extern unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt);
+extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
extern int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
extern char *prom_getenv(char *name);
extern long prom_setenv(char *name, char *value);
@@ -276,23 +270,19 @@
cmd = regs->regs[base + 4];
switch(cmd) {
case SGI_SYSID: {
- char *buf = (char *) regs->regs[base + 5];
+ char __user *buf = (char __user *) regs->regs[base + 5];
/* XXX Use ethernet addr.... */
- retval = clear_user(buf, 64);
+ retval = clear_user(buf, 64) ? -EFAULT : 0;
break;
}
#if 0
case SGI_RDNAME: {
int pid = (int) regs->regs[base + 5];
- char *buf = (char *) regs->regs[base + 6];
+ char __user *buf = (char __user *) regs->regs[base + 6];
struct task_struct *p;
char tcomm[sizeof(current->comm)];
- if (!access_ok(VERIFY_WRITE, buf, sizeof(tcomm))) {
- retval = -EFAULT;
- break;
- }
read_lock(&tasklist_lock);
p = find_task_by_pid(pid);
if (!p) {
@@ -304,34 +294,28 @@
read_unlock(&tasklist_lock);
/* XXX Need to check sizes. */
- copy_to_user(buf, tcomm, sizeof(tcomm));
- retval = 0;
+ retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
break;
}
case SGI_GETNVRAM: {
- char *name = (char *) regs->regs[base+5];
- char *buf = (char *) regs->regs[base+6];
+ char __user *name = (char __user *) regs->regs[base+5];
+ char __user *buf = (char __user *) regs->regs[base+6];
char *value;
return -EINVAL; /* til I fix it */
- if (!access_ok(VERIFY_WRITE, buf, 128)) {
- retval = -EFAULT;
- break;
- }
value = prom_getenv(name); /* PROM lock? */
if (!value) {
retval = -EINVAL;
break;
}
/* Do I strlen() for the length? */
- copy_to_user(buf, value, 128);
- retval = 0;
+ retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
break;
}
case SGI_SETNVRAM: {
- char *name = (char *) regs->regs[base+5];
- char *value = (char *) regs->regs[base+6];
+ char __user *name = (char __user *) regs->regs[base+5];
+ char __user *value = (char __user *) regs->regs[base+6];
return -EINVAL; /* til I fix it */
retval = prom_setenv(name, value);
/* XXX make sure retval conforms to syssgi(2) */
@@ -407,16 +391,16 @@
case SGI_SETGROUPS:
retval = sys_setgroups((int) regs->regs[base + 5],
- (gid_t *) regs->regs[base + 6]);
+ (gid_t __user *) regs->regs[base + 6]);
break;
case SGI_GETGROUPS:
retval = sys_getgroups((int) regs->regs[base + 5],
- (gid_t *) regs->regs[base + 6]);
+ (gid_t __user *) regs->regs[base + 6]);
break;
case SGI_RUSAGE: {
- struct rusage *ru = (struct rusage *) regs->regs[base + 6];
+ struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
switch((int) regs->regs[base + 5]) {
case 0:
@@ -453,7 +437,7 @@
case SGI_ELFMAP:
retval = irix_mapelf((int) regs->regs[base + 5],
- (struct elf_phdr *) regs->regs[base + 6],
+ (struct elf_phdr __user *) regs->regs[base + 6],
(int) regs->regs[base + 7]);
break;
@@ -468,24 +452,24 @@
case SGI_PHYSP: {
unsigned long addr = regs->regs[base + 5];
- int *pageno = (int *) (regs->regs[base + 6]);
+ int __user *pageno = (int __user *) (regs->regs[base + 6]);
struct mm_struct *mm = current->mm;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- if (!access_ok(VERIFY_WRITE, pageno, sizeof(int)))
- return -EFAULT;
-
down_read(&mm->mmap_sem);
pgdp = pgd_offset(mm, addr);
- pmdp = pmd_offset(pgdp, addr);
+ pudp = pud_offset(pgdp, addr);
+ pmdp = pmd_offset(pudp, addr);
ptep = pte_offset(pmdp, addr);
retval = -EINVAL;
if (ptep) {
pte_t pte = *ptep;
if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
+ /* b0rked on 64-bit */
retval = put_user((pte_val(pte) & PAGE_MASK) >>
PAGE_SHIFT, pageno);
}
@@ -496,7 +480,7 @@
case SGI_INVENT: {
int arg1 = (int) regs->regs [base + 5];
- void *buffer = (void *) regs->regs [base + 6];
+ void __user *buffer = (void __user *) regs->regs [base + 6];
int count = (int) regs->regs [base + 7];
switch (arg1) {
@@ -692,8 +676,8 @@
}
/* XXX need more than this... */
-asmlinkage int irix_mount(char *dev_name, char *dir_name, unsigned long flags,
- char *type, void *data, int datalen)
+asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
+ unsigned long flags, char __user *type, void __user *data, int datalen)
{
printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
current->comm, current->pid,
@@ -708,8 +692,8 @@
char f_fname[6], f_fpack[6];
};
-asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
- int len, int fs_type)
+asmlinkage int irix_statfs(const char __user *path,
+ struct irix_statfs __user *buf, int len, int fs_type)
{
struct nameidata nd;
struct kstatfs kbuf;
@@ -724,6 +708,7 @@
error = -EFAULT;
goto out;
}
+
error = user_path_walk(path, &nd);
if (error)
goto out;
@@ -732,18 +717,17 @@
if (error)
goto dput_and_out;
- __put_user(kbuf.f_type, &buf->f_type);
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error = __put_user(kbuf.f_type, &buf->f_type);
+ error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
for (i = 0; i < 6; i++) {
- __put_user(0, &buf->f_fname[i]);
- __put_user(0, &buf->f_fpack[i]);
+ error |= __put_user(0, &buf->f_fname[i]);
+ error |= __put_user(0, &buf->f_fpack[i]);
}
- error = 0;
dput_and_out:
path_release(&nd);
@@ -751,7 +735,7 @@
return error;
}
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
+asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
{
struct kstatfs kbuf;
struct file *file;
@@ -761,6 +745,7 @@
error = -EFAULT;
goto out;
}
+
if (!(file = fget(fd))) {
error = -EBADF;
goto out;
@@ -770,16 +755,17 @@
if (error)
goto out_f;
- __put_user(kbuf.f_type, &buf->f_type);
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- for(i = 0; i < 6; i++) {
- __put_user(0, &buf->f_fname[i]);
- __put_user(0, &buf->f_fpack[i]);
+ error = __put_user(kbuf.f_type, &buf->f_type);
+ error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+
+ for (i = 0; i < 6; i++) {
+ error |= __put_user(0, &buf->f_fname[i]);
+ error |= __put_user(0, &buf->f_fpack[i]);
}
out_f:
@@ -806,14 +792,15 @@
return error;
}
-asmlinkage int irix_times(struct tms * tbuf)
+asmlinkage int irix_times(struct tms __user *tbuf)
{
int err = 0;
if (tbuf) {
if (!access_ok(VERIFY_WRITE,tbuf,sizeof *tbuf))
return -EFAULT;
- err |= __put_user(current->utime, &tbuf->tms_utime);
+
+ err = __put_user(current->utime, &tbuf->tms_utime);
err |= __put_user(current->stime, &tbuf->tms_stime);
err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
@@ -829,13 +816,13 @@
if(regs->regs[2] == 1000)
base = 1;
- filename = getname((char *) (long)regs->regs[base + 4]);
+ filename = getname((char __user *) (long)regs->regs[base + 4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
- error = do_execve(filename, (char **) (long)regs->regs[base + 5],
- (char **) 0, regs);
+ error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+ NULL, regs);
putname(filename);
return error;
@@ -848,12 +835,12 @@
if (regs->regs[2] == 1000)
base = 1;
- filename = getname((char *) (long)regs->regs[base + 4]);
+ filename = getname((char __user *) (long)regs->regs[base + 4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
- error = do_execve(filename, (char **) (long)regs->regs[base + 5],
- (char **) (long)regs->regs[base + 6], regs);
+ error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+ (char __user * __user *) (long)regs->regs[base + 6], regs);
putname(filename);
return error;
@@ -909,22 +896,17 @@
return sys_socket(family, type, protocol);
}
-asmlinkage int irix_getdomainname(char *name, int len)
+asmlinkage int irix_getdomainname(char __user *name, int len)
{
- int error;
-
- if (!access_ok(VERIFY_WRITE, name, len))
- return -EFAULT;
+ int err;
down_read(&uts_sem);
if (len > __NEW_UTS_LEN)
len = __NEW_UTS_LEN;
- error = 0;
- if (copy_to_user(name, system_utsname.domainname, len))
- error = -EFAULT;
+ err = copy_to_user(name, system_utsname.domainname, len) ? -EFAULT : 0;
up_read(&uts_sem);
- return error;
+ return err;
}
asmlinkage unsigned long irix_getpagesize(void)
@@ -940,12 +922,13 @@
case 0:
return sys_msgget((key_t) arg0, (int) arg1);
case 1:
- return sys_msgctl((int) arg0, (int) arg1, (struct msqid_ds *)arg2);
+ return sys_msgctl((int) arg0, (int) arg1,
+ (struct msqid_ds __user *)arg2);
case 2:
- return sys_msgrcv((int) arg0, (struct msgbuf *) arg1,
+ return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
(size_t) arg2, (long) arg3, (int) arg4);
case 3:
- return sys_msgsnd((int) arg0, (struct msgbuf *) arg1,
+ return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
(size_t) arg2, (int) arg3);
default:
return -EINVAL;
@@ -957,12 +940,13 @@
{
switch (opcode) {
case 0:
- return do_shmat((int) arg0, (char *)arg1, (int) arg2,
+ return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
(unsigned long *) arg3);
case 1:
- return sys_shmctl((int)arg0, (int)arg1, (struct shmid_ds *)arg2);
+ return sys_shmctl((int)arg0, (int)arg1,
+ (struct shmid_ds __user *)arg2);
case 2:
- return sys_shmdt((char *)arg0);
+ return sys_shmdt((char __user *)arg0);
case 3:
return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
default:
@@ -980,7 +964,7 @@
case 1:
return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
case 2:
- return sys_semop((int) arg0, (struct sembuf *)arg1,
+ return sys_semop((int) arg0, (struct sembuf __user *)arg1,
(unsigned int) arg2);
default:
return -EINVAL;
@@ -998,15 +982,16 @@
lock_kernel();
retval = fn(file, offset, origin);
unlock_kernel();
+
return retval;
}
asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
int origin)
{
- int retval;
struct file * file;
loff_t offset;
+ int retval;
retval = -EBADF;
file = fget(fd);
@@ -1031,12 +1016,12 @@
return 0;
}
-asmlinkage int irix_sgikopt(char *istring, char *ostring, int len)
+asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
{
return -EINVAL;
}
-asmlinkage int irix_gettimeofday(struct timeval *tv)
+asmlinkage int irix_gettimeofday(struct timeval __user *tv)
{
time_t sec;
long nsec, seq;
@@ -1077,7 +1062,7 @@
if (max_size > file->f_dentry->d_inode->i_size) {
old_pos = sys_lseek (fd, max_size - 1, 0);
- sys_write (fd, "", 1);
+ sys_write (fd, (void __user *) "", 1);
sys_lseek (fd, old_pos, 0);
}
}
@@ -1102,7 +1087,7 @@
return -EINVAL;
}
-asmlinkage int irix_pagelock(char *addr, int len, int op)
+asmlinkage int irix_pagelock(char __user *addr, int len, int op)
{
printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
current->comm, current->pid, addr, len, op);
@@ -1142,7 +1127,7 @@
return error;
}
-asmlinkage int irix_systeminfo(int cmd, char *buf, int cnt)
+asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
{
printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
current->comm, current->pid, cmd, buf, cnt);
@@ -1158,14 +1143,14 @@
char _unused3[257], _unused4[257], _unused5[257];
};
-asmlinkage int irix_uname(struct iuname *buf)
+asmlinkage int irix_uname(struct iuname __user *buf)
{
down_read(&uts_sem);
- if (copy_to_user(system_utsname.sysname, buf->sysname, 65)
- || copy_to_user(system_utsname.nodename, buf->nodename, 65)
- || copy_to_user(system_utsname.release, buf->release, 65)
- || copy_to_user(system_utsname.version, buf->version, 65)
- || copy_to_user(system_utsname.machine, buf->machine, 65)) {
+ if (copy_from_user(system_utsname.sysname, buf->sysname, 65)
+ || copy_from_user(system_utsname.nodename, buf->nodename, 65)
+ || copy_from_user(system_utsname.release, buf->release, 65)
+ || copy_from_user(system_utsname.version, buf->version, 65)
+ || copy_from_user(system_utsname.machine, buf->machine, 65)) {
return -EFAULT;
}
up_read(&uts_sem);
@@ -1175,7 +1160,7 @@
#undef DEBUG_XSTAT
-static int irix_xstat32_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
{
struct xstat32 {
u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
@@ -1215,7 +1200,7 @@
return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
}
-static int irix_xstat64_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
{
struct xstat64 {
u32 st_dev; s32 st_pad1[3];
@@ -1265,7 +1250,7 @@
return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
}
-asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
{
int retval;
struct kstat stat;
@@ -1291,7 +1276,7 @@
return retval;
}
-asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
{
int error;
struct kstat stat;
@@ -1318,7 +1303,7 @@
return error;
}
-asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf)
+asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
{
int error;
struct kstat stat;
@@ -1344,7 +1329,7 @@
return error;
}
-asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev)
+asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
{
int retval;
printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
@@ -1364,7 +1349,7 @@
return retval;
}
-asmlinkage int irix_swapctl(int cmd, char *arg)
+asmlinkage int irix_swapctl(int cmd, char __user *arg)
{
printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
current->comm, current->pid, cmd, arg);
@@ -1380,7 +1365,7 @@
char f_fstr[32]; u32 f_filler[16];
};
-asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
+asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
{
struct nameidata nd;
struct kstatfs kbuf;
@@ -1388,10 +1373,9 @@
printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
current->comm, current->pid, fname, buf);
- if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+ return -EFAULT;
+
error = user_path_walk(fname, &nd);
if (error)
goto out;
@@ -1399,27 +1383,25 @@
if (error)
goto dput_and_out;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for (i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
for (i = 0; i < 32; i++)
- __put_user(0, &buf->f_fstr[i]);
-
- error = 0;
+ error |= __put_user(0, &buf->f_fstr[i]);
dput_and_out:
path_release(&nd);
@@ -1427,7 +1409,7 @@
return error;
}
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
{
struct kstatfs kbuf;
struct file *file;
@@ -1436,10 +1418,9 @@
printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
current->comm, current->pid, fd, buf);
- if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+ return -EFAULT;
+
if (!(file = fget(fd))) {
error = -EBADF;
goto out;
@@ -1448,24 +1429,24 @@
if (error)
goto out_f;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for(i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
- __clear_user(&buf->f_fstr, sizeof(buf->f_fstr));
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
out_f:
fput(file);
@@ -1489,7 +1470,7 @@
return -EINVAL;
}
-asmlinkage int irix_truncate64(char *name, int pad, int size1, int size2)
+asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
{
int retval;
@@ -1522,6 +1503,7 @@
int len, prot, flags, fd, off1, off2, error, base = 0;
unsigned long addr, pgoff, *sp;
struct file *file = NULL;
+ int err;
if (regs->regs[2] == 1000)
base = 1;
@@ -1531,36 +1513,31 @@
prot = regs->regs[base + 6];
if (!base) {
flags = regs->regs[base + 7];
- if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
+ return -EFAULT;
fd = sp[0];
- __get_user(off1, &sp[1]);
- __get_user(off2, &sp[2]);
+ err = __get_user(off1, &sp[1]);
+ err |= __get_user(off2, &sp[2]);
} else {
- if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) {
- error = -EFAULT;
- goto out;
- }
- __get_user(flags, &sp[0]);
- __get_user(fd, &sp[1]);
- __get_user(off1, &sp[2]);
- __get_user(off2, &sp[3]);
+ if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
+ return -EFAULT;
+ err = __get_user(flags, &sp[0]);
+ err |= __get_user(fd, &sp[1]);
+ err |= __get_user(off1, &sp[2]);
+ err |= __get_user(off2, &sp[3]);
}
- if (off1 & PAGE_MASK) {
- error = -EOVERFLOW;
- goto out;
- }
+ if (err)
+ return err;
+
+ if (off1 & PAGE_MASK)
+ return -EOVERFLOW;
pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
if (!(flags & MAP_ANONYMOUS)) {
- if (!(file = fget(fd))) {
- error = -EBADF;
- goto out;
- }
+ if (!(file = fget(fd)))
+ return -EBADF;
/* Ok, bad taste hack follows, try to think in something else
when reading this */
@@ -1570,7 +1547,7 @@
if (max_size > file->f_dentry->d_inode->i_size) {
old_pos = sys_lseek (fd, max_size - 1, 0);
- sys_write (fd, "", 1);
+ sys_write (fd, (void __user *) "", 1);
sys_lseek (fd, old_pos, 0);
}
}
@@ -1585,7 +1562,6 @@
if (file)
fput(file);
-out:
return error;
}
@@ -1597,7 +1573,7 @@
return -EINVAL;
}
-asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
int off1, int off2)
{
printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
@@ -1606,7 +1582,7 @@
return -EINVAL;
}
-asmlinkage int irix_pwrite(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
int off1, int off2)
{
printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
@@ -1638,7 +1614,7 @@
u32 f_filler[16];
};
-asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
+asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
{
struct nameidata nd;
struct kstatfs kbuf;
@@ -1650,6 +1626,7 @@
error = -EFAULT;
goto out;
}
+
error = user_path_walk(fname, &nd);
if (error)
goto out;
@@ -1657,27 +1634,25 @@
if (error)
goto dput_and_out;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for(i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
for(i = 0; i < 32; i++)
- __put_user(0, &buf->f_fstr[i]);
-
- error = 0;
+ error |= __put_user(0, &buf->f_fstr[i]);
dput_and_out:
path_release(&nd);
@@ -1685,7 +1660,7 @@
return error;
}
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
{
struct kstatfs kbuf;
struct file *file;
@@ -1706,24 +1681,24 @@
if (error)
goto out_f;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for(i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
- __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i]));
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
out_f:
fput(file);
@@ -1731,9 +1706,9 @@
return error;
}
-asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf)
+asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
{
- int err = 0;
+ int err;
printk("[%s:%d] irix_getmountid(%s, %p)\n",
current->comm, current->pid, fname, midbuf);
@@ -1746,7 +1721,7 @@
* fsid of the filesystem to try and make the right decision, but
* we don't have this so for now. XXX
*/
- err |= __put_user(0, &midbuf[0]);
+ err = __put_user(0, &midbuf[0]);
err |= __put_user(0, &midbuf[1]);
err |= __put_user(0, &midbuf[2]);
err |= __put_user(0, &midbuf[3]);
@@ -1773,8 +1748,8 @@
};
struct irix_dirent32_callback {
- struct irix_dirent32 *current_dir;
- struct irix_dirent32 *previous;
+ struct irix_dirent32 __user *current_dir;
+ struct irix_dirent32 __user *previous;
int count;
int error;
};
@@ -1782,13 +1757,13 @@
#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
-static int irix_filldir32(void *__buf, const char *name, int namlen,
- loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir32(void *__buf, const char *name,
+ int namlen, loff_t offset, ino_t ino, unsigned int d_type)
{
- struct irix_dirent32 *dirent;
- struct irix_dirent32_callback *buf =
- (struct irix_dirent32_callback *)__buf;
+ struct irix_dirent32 __user *dirent;
+ struct irix_dirent32_callback *buf = __buf;
unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
+ int err = 0;
#ifdef DEBUG_GETDENTS
printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
@@ -1799,25 +1774,26 @@
return -EINVAL;
dirent = buf->previous;
if (dirent)
- __put_user(offset, &dirent->d_off);
+ err = __put_user(offset, &dirent->d_off);
dirent = buf->current_dir;
- buf->previous = dirent;
- __put_user(ino, &dirent->d_ino);
- __put_user(reclen, &dirent->d_reclen);
- copy_to_user(dirent->d_name, name, namlen);
- __put_user(0, &dirent->d_name[namlen]);
- ((char *) dirent) += reclen;
+ err |= __put_user(dirent, &buf->previous);
+ err |= __put_user(ino, &dirent->d_ino);
+ err |= __put_user(reclen, &dirent->d_reclen);
+ err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
+ err |= __put_user(0, &dirent->d_name[namlen]);
+ dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
+
buf->current_dir = dirent;
buf->count -= reclen;
- return 0;
+ return err;
}
-asmlinkage int irix_ngetdents(unsigned int fd, void * dirent,
- unsigned int count, int *eob)
+asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
+ unsigned int count, int __user *eob)
{
struct file *file;
- struct irix_dirent32 *lastdirent;
+ struct irix_dirent32 __user *lastdirent;
struct irix_dirent32_callback buf;
int error;
@@ -1830,7 +1806,7 @@
if (!file)
goto out;
- buf.current_dir = (struct irix_dirent32 *) dirent;
+ buf.current_dir = (struct irix_dirent32 __user *) dirent;
buf.previous = NULL;
buf.count = count;
buf.error = 0;
@@ -1870,8 +1846,8 @@
};
struct irix_dirent64_callback {
- struct irix_dirent64 *curr;
- struct irix_dirent64 *previous;
+ struct irix_dirent64 __user *curr;
+ struct irix_dirent64 __user *previous;
int count;
int error;
};
@@ -1879,37 +1855,44 @@
#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
-static int irix_filldir64(void * __buf, const char * name, int namlen,
- loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir64(void *__buf, const char *name,
+ int namlen, loff_t offset, ino_t ino, unsigned int d_type)
{
- struct irix_dirent64 *dirent;
- struct irix_dirent64_callback * buf =
- (struct irix_dirent64_callback *) __buf;
+ struct irix_dirent64 __user *dirent;
+ struct irix_dirent64_callback * buf = __buf;
unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
+ int err = 0;
- buf->error = -EINVAL; /* only used if we fail.. */
+ if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
+ return -EFAULT;
+
+ if (__put_user(-EINVAL, &buf->error)) /* only used if we fail.. */
+ return -EFAULT;
if (reclen > buf->count)
return -EINVAL;
dirent = buf->previous;
if (dirent)
- __put_user(offset, &dirent->d_off);
+ err = __put_user(offset, &dirent->d_off);
dirent = buf->curr;
buf->previous = dirent;
- __put_user(ino, &dirent->d_ino);
- __put_user(reclen, &dirent->d_reclen);
- __copy_to_user(dirent->d_name, name, namlen);
- __put_user(0, &dirent->d_name[namlen]);
- ((char *) dirent) += reclen;
+ err |= __put_user(ino, &dirent->d_ino);
+ err |= __put_user(reclen, &dirent->d_reclen);
+ err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
+ ? -EFAULT : 0;
+ err |= __put_user(0, &dirent->d_name[namlen]);
+
+ dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
+
buf->curr = dirent;
buf->count -= reclen;
- return 0;
+ return err;
}
-asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
+asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
{
struct file *file;
- struct irix_dirent64 *lastdirent;
+ struct irix_dirent64 __user *lastdirent;
struct irix_dirent64_callback buf;
int error;
@@ -1929,7 +1912,7 @@
if (cnt < (sizeof(struct irix_dirent64) + 255))
goto out_f;
- buf.curr = (struct irix_dirent64 *) dirent;
+ buf.curr = (struct irix_dirent64 __user *) dirent;
buf.previous = NULL;
buf.count = cnt;
buf.error = 0;
@@ -1941,7 +1924,8 @@
error = buf.error;
goto out_f;
}
- lastdirent->d_off = (u64) file->f_pos;
+ if (put_user(file->f_pos, &lastdirent->d_off))
+ return -EFAULT;
#ifdef DEBUG_GETDENTS
printk("returning %d\n", cnt - buf.count);
#endif
@@ -1953,10 +1937,10 @@
return error;
}
-asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
+asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
{
struct file *file;
- struct irix_dirent64 *lastdirent;
+ struct irix_dirent64 __user *lastdirent;
struct irix_dirent64_callback buf;
int error;
@@ -1978,7 +1962,7 @@
goto out_f;
*eob = 0;
- buf.curr = (struct irix_dirent64 *) dirent;
+ buf.curr = (struct irix_dirent64 __user *) dirent;
buf.previous = NULL;
buf.count = cnt;
buf.error = 0;
@@ -1990,7 +1974,8 @@
error = buf.error;
goto out_f;
}
- lastdirent->d_off = (u64) file->f_pos;
+ if (put_user(file->f_pos, &lastdirent->d_off))
+ return -EFAULT;
#ifdef DEBUG_GETDENTS
printk("eob=%d returning %d\n", *eob, cnt - buf.count);
#endif
@@ -2053,14 +2038,14 @@
return retval;
}
-asmlinkage int irix_utssys(char *inbuf, int arg, int type, char *outbuf)
+asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
{
int retval;
switch(type) {
case 0:
/* uname() */
- retval = irix_uname((struct iuname *)inbuf);
+ retval = irix_uname((struct iuname __user *)inbuf);
goto out;
case 2:
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 0dd0df7a..a24651d 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -11,6 +11,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -25,6 +26,7 @@
#include <linux/module.h>
#include <asm/bootinfo.h>
+#include <asm/cache.h>
#include <asm/compiler.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -76,7 +78,7 @@
static unsigned int sll32_usecs_per_cycle;
/* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy;
+static unsigned long cycles_per_jiffy __read_mostly;
/* Cycle counter value at the previous timer interrupt.. */
static unsigned int timerhi, timerlo;
@@ -98,7 +100,10 @@
return 0;
}
-static void null_hpt_init(unsigned int count) { /* nothing */ }
+static void null_hpt_init(unsigned int count)
+{
+ /* nothing */
+}
/*
@@ -108,8 +113,10 @@
{
unsigned int count;
+#ifndef CONFIG_SOC_PNX8550 /* pnx8550 resets to zero */
/* Ack this timer interrupt and set the next one. */
expirelo += cycles_per_jiffy;
+#endif
write_c0_compare(expirelo);
/* Check to see if we have missed any timer interrupts. */
@@ -224,7 +231,6 @@
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
ntp_clear();
-
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index a53b1ed..6f3ff96 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -9,7 +9,7 @@
* Copyright (C) 1999 Silicon Graphics, Inc.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 01 MIPS Technologies, Inc.
- * Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005 Maciej W. Rozycki
*/
#include <linux/config.h>
#include <linux/init.h>
@@ -20,12 +20,16 @@
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
+#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
#include <asm/break.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/module.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -54,14 +58,19 @@
extern asmlinkage void handle_fpe(void);
extern asmlinkage void handle_mdmx(void);
extern asmlinkage void handle_watch(void);
+extern asmlinkage void handle_mt(void);
+extern asmlinkage void handle_dsp(void);
extern asmlinkage void handle_mcheck(void);
extern asmlinkage void handle_reserved(void);
-extern int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_soft_struct *ctx);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
/*
* These constant is for searching for possible module text segments.
@@ -201,32 +210,47 @@
printk("Status: %08x ", (uint32_t) regs->cp0_status);
- if (regs->cp0_status & ST0_KX)
- printk("KX ");
- if (regs->cp0_status & ST0_SX)
- printk("SX ");
- if (regs->cp0_status & ST0_UX)
- printk("UX ");
- switch (regs->cp0_status & ST0_KSU) {
- case KSU_USER:
- printk("USER ");
- break;
- case KSU_SUPERVISOR:
- printk("SUPERVISOR ");
- break;
- case KSU_KERNEL:
- printk("KERNEL ");
- break;
- default:
- printk("BAD_MODE ");
- break;
+ if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
+ if (regs->cp0_status & ST0_KUO)
+ printk("KUo ");
+ if (regs->cp0_status & ST0_IEO)
+ printk("IEo ");
+ if (regs->cp0_status & ST0_KUP)
+ printk("KUp ");
+ if (regs->cp0_status & ST0_IEP)
+ printk("IEp ");
+ if (regs->cp0_status & ST0_KUC)
+ printk("KUc ");
+ if (regs->cp0_status & ST0_IEC)
+ printk("IEc ");
+ } else {
+ if (regs->cp0_status & ST0_KX)
+ printk("KX ");
+ if (regs->cp0_status & ST0_SX)
+ printk("SX ");
+ if (regs->cp0_status & ST0_UX)
+ printk("UX ");
+ switch (regs->cp0_status & ST0_KSU) {
+ case KSU_USER:
+ printk("USER ");
+ break;
+ case KSU_SUPERVISOR:
+ printk("SUPERVISOR ");
+ break;
+ case KSU_KERNEL:
+ printk("KERNEL ");
+ break;
+ default:
+ printk("BAD_MODE ");
+ break;
+ }
+ if (regs->cp0_status & ST0_ERL)
+ printk("ERL ");
+ if (regs->cp0_status & ST0_EXL)
+ printk("EXL ");
+ if (regs->cp0_status & ST0_IE)
+ printk("IE ");
}
- if (regs->cp0_status & ST0_ERL)
- printk("ERL ");
- if (regs->cp0_status & ST0_EXL)
- printk("EXL ");
- if (regs->cp0_status & ST0_IE)
- printk("IE ");
printk("\n");
printk("Cause : %08x\n", cause);
@@ -252,29 +276,18 @@
static DEFINE_SPINLOCK(die_lock);
-NORET_TYPE void __die(const char * str, struct pt_regs * regs,
- const char * file, const char * func, unsigned long line)
+NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
{
static int die_counter;
console_verbose();
spin_lock_irq(&die_lock);
- printk("%s", str);
- if (file && func)
- printk(" in %s:%s, line %ld", file, func, line);
- printk("[#%d]:\n", ++die_counter);
+ printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
spin_unlock_irq(&die_lock);
do_exit(SIGSEGV);
}
-void __die_if_kernel(const char * str, struct pt_regs * regs,
- const char * file, const char * func, unsigned long line)
-{
- if (!user_mode(regs))
- __die(str, regs, file, func, line);
-}
-
extern const struct exception_table_entry __start___dbe_table[];
extern const struct exception_table_entry __stop___dbe_table[];
@@ -339,9 +352,9 @@
static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode)
{
- unsigned int *epc;
+ unsigned int __user *epc;
- epc = (unsigned int *) regs->cp0_epc +
+ epc = (unsigned int __user *) regs->cp0_epc +
((regs->cp0_cause & CAUSEF_BD) != 0);
if (!get_user(*opcode, epc))
return 0;
@@ -360,6 +373,10 @@
#define OFFSET 0x0000ffff
#define LL 0xc0000000
#define SC 0xe0000000
+#define SPEC3 0x7c000000
+#define RD 0x0000f800
+#define FUNC 0x0000003f
+#define RDHWR 0x0000003b
/*
* The ll_bit is cleared by r*_switch.S
@@ -371,7 +388,7 @@
static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
{
- unsigned long value, *vaddr;
+ unsigned long value, __user *vaddr;
long offset;
int signal = 0;
@@ -385,7 +402,8 @@
offset <<= 16;
offset >>= 16;
- vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+ vaddr = (unsigned long __user *)
+ ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
if ((unsigned long)vaddr & 3) {
signal = SIGBUS;
@@ -407,9 +425,10 @@
preempt_enable();
+ compute_return_epc(regs);
+
regs->regs[(opcode & RT) >> 16] = value;
- compute_return_epc(regs);
return;
sig:
@@ -418,7 +437,8 @@
static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
{
- unsigned long *vaddr, reg;
+ unsigned long __user *vaddr;
+ unsigned long reg;
long offset;
int signal = 0;
@@ -432,7 +452,8 @@
offset <<= 16;
offset >>= 16;
- vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+ vaddr = (unsigned long __user *)
+ ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
reg = (opcode & RT) >> 16;
if ((unsigned long)vaddr & 3) {
@@ -443,9 +464,9 @@
preempt_disable();
if (ll_bit == 0 || ll_task != current) {
+ compute_return_epc(regs);
regs->regs[reg] = 0;
preempt_enable();
- compute_return_epc(regs);
return;
}
@@ -456,9 +477,9 @@
goto sig;
}
+ compute_return_epc(regs);
regs->regs[reg] = 1;
- compute_return_epc(regs);
return;
sig:
@@ -491,6 +512,37 @@
return -EFAULT; /* Strange things going on ... */
}
+/*
+ * Simulate trapping 'rdhwr' instructions to provide user accessible
+ * registers not implemented in hardware. The only current use of this
+ * is the thread area pointer.
+ */
+static inline int simulate_rdhwr(struct pt_regs *regs)
+{
+ struct thread_info *ti = current->thread_info;
+ unsigned int opcode;
+
+ if (unlikely(get_insn_opcode(regs, &opcode)))
+ return -EFAULT;
+
+ if (unlikely(compute_return_epc(regs)))
+ return -EFAULT;
+
+ if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
+ int rd = (opcode & RD) >> 11;
+ int rt = (opcode & RT) >> 16;
+ switch (rd) {
+ case 29:
+ regs->regs[rt] = ti->tp_value;
+ break;
+ default:
+ return -EFAULT;
+ }
+ }
+
+ return 0;
+}
+
asmlinkage void do_ov(struct pt_regs *regs)
{
siginfo_t info;
@@ -498,7 +550,7 @@
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
- info.si_addr = (void *)regs->cp0_epc;
+ info.si_addr = (void __user *) regs->cp0_epc;
force_sig_info(SIGFPE, &info, current);
}
@@ -512,6 +564,14 @@
preempt_disable();
+#ifdef CONFIG_PREEMPT
+ if (!is_fpu_owner()) {
+ /* We might lose fpu before disabling preempt... */
+ own_fpu();
+ BUG_ON(!used_math());
+ restore_fp(current);
+ }
+#endif
/*
* Unimplemented operation exception. If we've got the full
* software emulator on-board, let's use it...
@@ -523,11 +583,18 @@
* a bit extreme for what should be an infrequent event.
*/
save_fp(current);
+ /* Ensure 'resume' not overwrite saved fp context again. */
+ lose_fpu();
+
+ preempt_enable();
/* Run the emulator */
- sig = fpu_emulator_cop1Handler (0, regs,
+ sig = fpu_emulator_cop1Handler (regs,
¤t->thread.fpu.soft);
+ preempt_disable();
+
+ own_fpu(); /* Using the FPU again. */
/*
* We can't allow the emulated instruction to leave any of
* the cause bit set in $fcr31.
@@ -584,7 +651,7 @@
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
- info.si_addr = (void *)regs->cp0_epc;
+ info.si_addr = (void __user *) regs->cp0_epc;
force_sig_info(SIGFPE, &info, current);
break;
default:
@@ -621,7 +688,7 @@
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
- info.si_addr = (void *)regs->cp0_epc;
+ info.si_addr = (void __user *) regs->cp0_epc;
force_sig_info(SIGFPE, &info, current);
break;
default:
@@ -637,6 +704,9 @@
if (!simulate_llsc(regs))
return;
+ if (!simulate_rdhwr(regs))
+ return;
+
force_sig(SIGILL, current);
}
@@ -650,11 +720,13 @@
switch (cpid) {
case 0:
- if (cpu_has_llsc)
- break;
+ if (!cpu_has_llsc)
+ if (!simulate_llsc(regs))
+ return;
- if (!simulate_llsc(regs))
+ if (!simulate_rdhwr(regs))
return;
+
break;
case 1:
@@ -668,15 +740,15 @@
set_used_math();
}
+ preempt_enable();
+
if (!cpu_has_fpu) {
- int sig = fpu_emulator_cop1Handler(0, regs,
+ int sig = fpu_emulator_cop1Handler(regs,
¤t->thread.fpu.soft);
if (sig)
force_sig(sig, current);
}
- preempt_enable();
-
return;
case 2:
@@ -716,6 +788,22 @@
(regs->cp0_status & ST0_TS) ? "" : "not ");
}
+asmlinkage void do_mt(struct pt_regs *regs)
+{
+ die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+ force_sig(SIGILL, current);
+}
+
+
+asmlinkage void do_dsp(struct pt_regs *regs)
+{
+ if (cpu_has_dsp)
+ panic("Unexpected DSP exception\n");
+
+ force_sig(SIGILL, current);
+}
+
asmlinkage void do_reserved(struct pt_regs *regs)
{
/*
@@ -728,6 +816,12 @@
(regs->cp0_cause & 0x7f) >> 2);
}
+asmlinkage void do_default_vi(struct pt_regs *regs)
+{
+ show_regs(regs);
+ panic("Caught unexpected vectored interrupt.");
+}
+
/*
* Some MIPS CPUs can enable/disable for cache parity detection, but do
* it different ways.
@@ -736,16 +830,12 @@
{
switch (current_cpu_data.cputype) {
case CPU_24K:
- /* 24K cache parity not currently implemented in FPGA */
- printk(KERN_INFO "Disable cache parity protection for "
- "MIPS 24K CPU.\n");
- write_c0_ecc(read_c0_ecc() & ~0x80000000);
- break;
case CPU_5KC:
- /* Set the PE bit (bit 31) in the c0_ecc register. */
- printk(KERN_INFO "Enable cache parity protection for "
- "MIPS 5KC/24K CPUs.\n");
- write_c0_ecc(read_c0_ecc() | 0x80000000);
+ write_c0_ecc(0x80000000);
+ back_to_back_c0_hazard();
+ /* Set the PE bit (bit 31) in the c0_errctl register. */
+ printk(KERN_INFO "Cache parity protection %sabled\n",
+ (read_c0_ecc() & 0x80000000) ? "en" : "dis");
break;
case CPU_20KC:
case CPU_25KF:
@@ -783,7 +873,7 @@
reg_val & (1<<22) ? "E0 " : "");
printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
-#if defined(CONFIG_CPU_MIPS32) || defined (CONFIG_CPU_MIPS64)
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
if (reg_val & (1<<22))
printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
@@ -840,7 +930,11 @@
while(1) ;
}
+#define VECTORSPACING 0x100 /* for EI/VI mode */
+
+unsigned long ebase;
unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
/*
* As a side effect of the way this is implemented we're limited
@@ -854,13 +948,156 @@
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
- *(volatile u32 *)(CAC_BASE + 0x200) = 0x08000000 |
+ *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(CAC_BASE + 0x200, CAC_BASE + 0x204);
+ flush_icache_range(ebase + 0x200, ebase + 0x204);
}
return (void *)old_handler;
}
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Shadow register allocation
+ * FIXME: SMP...
+ */
+
+/* MIPSR2 shadow register sets */
+struct shadow_registers {
+ spinlock_t sr_lock; /* */
+ int sr_supported; /* Number of shadow register sets supported */
+ int sr_allocated; /* Bitmap of allocated shadow registers */
+} shadow_registers;
+
+void mips_srs_init(void)
+{
+#ifdef CONFIG_CPU_MIPSR2_SRS
+ shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+ printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported);
+#else
+ shadow_registers.sr_supported = 1;
+#endif
+ shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */
+ spin_lock_init(&shadow_registers.sr_lock);
+}
+
+int mips_srs_max(void)
+{
+ return shadow_registers.sr_supported;
+}
+
+int mips_srs_alloc (void)
+{
+ struct shadow_registers *sr = &shadow_registers;
+ unsigned long flags;
+ int set;
+
+ spin_lock_irqsave(&sr->sr_lock, flags);
+
+ for (set = 0; set < sr->sr_supported; set++) {
+ if ((sr->sr_allocated & (1 << set)) == 0) {
+ sr->sr_allocated |= 1 << set;
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+ return set;
+ }
+ }
+
+ /* None available */
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+ return -1;
+}
+
+void mips_srs_free (int set)
+{
+ struct shadow_registers *sr = &shadow_registers;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sr->sr_lock, flags);
+ sr->sr_allocated &= ~(1 << set);
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+}
+
+void *set_vi_srs_handler (int n, void *addr, int srs)
+{
+ unsigned long handler;
+ unsigned long old_handler = vi_handlers[n];
+ u32 *w;
+ unsigned char *b;
+
+ if (!cpu_has_veic && !cpu_has_vint)
+ BUG();
+
+ if (addr == NULL) {
+ handler = (unsigned long) do_default_vi;
+ srs = 0;
+ }
+ else
+ handler = (unsigned long) addr;
+ vi_handlers[n] = (unsigned long) addr;
+
+ b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+ if (srs >= mips_srs_max())
+ panic("Shadow register set %d not supported", srs);
+
+ if (cpu_has_veic) {
+ if (board_bind_eic_interrupt)
+ board_bind_eic_interrupt (n, srs);
+ }
+ else if (cpu_has_vint) {
+ /* SRSMap is only defined if shadow sets are implemented */
+ if (mips_srs_max() > 1)
+ change_c0_srsmap (0xf << n*4, srs << n*4);
+ }
+
+ if (srs == 0) {
+ /*
+ * If no shadow set is selected then use the default handler
+ * that does normal register saving and a standard interrupt exit
+ */
+
+ extern char except_vec_vi, except_vec_vi_lui;
+ extern char except_vec_vi_ori, except_vec_vi_end;
+ const int handler_len = &except_vec_vi_end - &except_vec_vi;
+ const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
+ const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+
+ if (handler_len > VECTORSPACING) {
+ /*
+ * Sigh... panicing won't help as the console
+ * is probably not configured :(
+ */
+ panic ("VECTORSPACING too small");
+ }
+
+ memcpy (b, &except_vec_vi, handler_len);
+ w = (u32 *)(b + lui_offset);
+ *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
+ w = (u32 *)(b + ori_offset);
+ *w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
+ flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+ }
+ else {
+ /*
+ * In other cases jump directly to the interrupt handler
+ *
+ * It is the handlers responsibility to save registers if required
+ * (eg hi/lo) and return from the exception using "eret"
+ */
+ w = (u32 *)b;
+ *w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
+ *w = 0;
+ flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+ }
+
+ return (void *)old_handler;
+}
+
+void *set_vi_handler (int n, void *addr)
+{
+ return set_vi_srs_handler (n, addr, 0);
+}
+#endif
+
/*
* This is used by native signal handling
*/
@@ -912,6 +1149,7 @@
extern void cpu_cache_init(void);
extern void tlb_init(void);
+extern void flush_tlb_handlers(void);
void __init per_cpu_trap_init(void)
{
@@ -929,15 +1167,32 @@
#endif
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
- change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+ change_c0_status(ST0_CU|ST0_MX|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
+ if (cpu_has_dsp)
+ set_c0_status(ST0_MX);
+
+#ifdef CONFIG_CPU_MIPSR2
+ write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
+#endif
+
/*
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
+ * Interrupt handling.
*/
- if (cpu_has_divec)
- set_c0_cause(CAUSEF_IV);
+ if (cpu_has_veic || cpu_has_vint) {
+ write_c0_ebase (ebase);
+ /* Setting vector spacing enables EI/VI mode */
+ change_c0_intctl (0x3e0, VECTORSPACING);
+ }
+ if (cpu_has_divec) {
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ set_c0_cause(CAUSEF_IV);
+ evpe(vpflags);
+ } else
+ set_c0_cause(CAUSEF_IV);
+ }
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
TLBMISS_HANDLER_SETUP();
@@ -951,13 +1206,41 @@
tlb_init();
}
+/* Install CPU exception handler */
+void __init set_handler (unsigned long offset, void *addr, unsigned long size)
+{
+ memcpy((void *)(ebase + offset), addr, size);
+ flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+/* Install uncached CPU exception handler */
+void __init set_uncached_handler (unsigned long offset, void *addr, unsigned long size)
+{
+#ifdef CONFIG_32BIT
+ unsigned long uncached_ebase = KSEG1ADDR(ebase);
+#endif
+#ifdef CONFIG_64BIT
+ unsigned long uncached_ebase = TO_UNCAC(ebase);
+#endif
+
+ memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
void __init trap_init(void)
{
extern char except_vec3_generic, except_vec3_r4000;
- extern char except_vec_ejtag_debug;
extern char except_vec4;
unsigned long i;
+ if (cpu_has_veic || cpu_has_vint)
+ ebase = (unsigned long) alloc_bootmem_low_pages (0x200 + VECTORSPACING*64);
+ else
+ ebase = CAC_BASE;
+
+#ifdef CONFIG_CPU_MIPSR2
+ mips_srs_init();
+#endif
+
per_cpu_trap_init();
/*
@@ -965,7 +1248,7 @@
* This will be overriden later as suitable for a particular
* configuration.
*/
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ set_handler(0x180, &except_vec3_generic, 0x80);
/*
* Setup default vectors
@@ -977,8 +1260,8 @@
* Copy the EJTAG debug exception vector handler code to it's final
* destination.
*/
- if (cpu_has_ejtag)
- memcpy((void *)(CAC_BASE + 0x300), &except_vec_ejtag_debug, 0x80);
+ if (cpu_has_ejtag && board_ejtag_handler_setup)
+ board_ejtag_handler_setup ();
/*
* Only some CPUs have the watch exceptions.
@@ -987,11 +1270,15 @@
set_except_vector(23, handle_watch);
/*
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
+ * Initialise interrupt handlers
*/
- if (cpu_has_divec)
- memcpy((void *)(CAC_BASE + 0x200), &except_vec4, 0x8);
+ if (cpu_has_veic || cpu_has_vint) {
+ int nvec = cpu_has_veic ? 64 : 8;
+ for (i = 0; i < nvec; i++)
+ set_vi_handler (i, NULL);
+ }
+ else if (cpu_has_divec)
+ set_handler(0x200, &except_vec4, 0x8);
/*
* Some CPUs can enable/disable for cache parity detection, but does
@@ -1023,21 +1310,6 @@
set_except_vector(11, handle_cpu);
set_except_vector(12, handle_ov);
set_except_vector(13, handle_tr);
- set_except_vector(22, handle_mdmx);
-
- if (cpu_has_fpu && !cpu_has_nofpuex)
- set_except_vector(15, handle_fpe);
-
- if (cpu_has_mcheck)
- set_except_vector(24, handle_mcheck);
-
- if (cpu_has_vce)
- /* Special exception: R4[04]00 uses also the divec space. */
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
- else if (cpu_has_4kex)
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
- else
- memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
if (current_cpu_data.cputype == CPU_R6000 ||
current_cpu_data.cputype == CPU_R6000A) {
@@ -1053,10 +1325,37 @@
//set_except_vector(15, handle_ndc);
}
+
+ if (board_nmi_handler_setup)
+ board_nmi_handler_setup();
+
+ if (cpu_has_fpu && !cpu_has_nofpuex)
+ set_except_vector(15, handle_fpe);
+
+ set_except_vector(22, handle_mdmx);
+
+ if (cpu_has_mcheck)
+ set_except_vector(24, handle_mcheck);
+
+ if (cpu_has_mipsmt)
+ set_except_vector(25, handle_mt);
+
+ if (cpu_has_dsp)
+ set_except_vector(26, handle_dsp);
+
+ if (cpu_has_vce)
+ /* Special exception: R4[04]00 uses also the divec space. */
+ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
+ else if (cpu_has_4kex)
+ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ else
+ memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
+
signal_init();
#ifdef CONFIG_MIPS32_COMPAT
signal32_init();
#endif
- flush_icache_range(CAC_BASE, CAC_BASE + 0x400);
+ flush_icache_range(ebase, ebase + 0x400);
+ flush_tlb_handlers();
}
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 36c5212..5b5a373 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -94,7 +94,7 @@
#endif
static inline int emulate_load_store_insn(struct pt_regs *regs,
- void *addr, unsigned long pc,
+ void __user *addr, unsigned int __user *pc,
unsigned long **regptr, unsigned long *newvalue)
{
union mips_instruction insn;
@@ -107,7 +107,7 @@
/*
* This load never faults.
*/
- __get_user(insn.word, (unsigned int *)pc);
+ __get_user(insn.word, pc);
switch (insn.i_format.opcode) {
/*
@@ -494,8 +494,8 @@
{
unsigned long *regptr, newval;
extern int do_dsemulret(struct pt_regs *);
+ unsigned int __user *pc;
mm_segment_t seg;
- unsigned long pc;
/*
* Address errors may be deliberately induced by the FPU emulator to
@@ -515,7 +515,7 @@
if ((regs->cp0_badvaddr == regs->cp0_epc) || (regs->cp0_epc & 0x1))
goto sigbus;
- pc = exception_epc(regs);
+ pc = (unsigned int __user *) exception_epc(regs);
if ((current->thread.mflags & MF_FIXADE) == 0)
goto sigbus;
@@ -526,7 +526,7 @@
seg = get_fs();
if (!user_mode(regs))
set_fs(KERNEL_DS);
- if (!emulate_load_store_insn(regs, (void *)regs->cp0_badvaddr, pc,
+ if (!emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc,
®ptr, &newval)) {
compute_return_epc(regs);
/*
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 482ac31..25cc856 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -54,13 +54,6 @@
*(.data)
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(4096);
- __rd_start = .;
- *(.initrd)
- . = ALIGN(4096);
- __rd_end = .;
-
CONSTRUCTORS
}
_gp = . + 0x8000;
@@ -96,12 +89,6 @@
.init.setup : { *(.init.setup) }
__setup_end = .;
- .early_initcall.init : {
- __earlyinitcall_start = .;
- *(.initcall.early1.init)
- }
- __earlyinitcall_end = .;
-
__initcall_start = .;
.initcall.init : {
*(.initcall1.init)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
new file mode 100644
index 0000000..97fefcc
--- /dev/null
+++ b/arch/mips/kernel/vpe.c
@@ -0,0 +1,1296 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * VPE support module
+ *
+ * Provides support for loading a MIPS SP program on VPE1.
+ * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
+ * (or partially linked). You should initialise your stack in the startup
+ * code. This loader looks for the symbol __start and sets up
+ * execution to resume from there. The MIPS SDE kit contains suitable examples.
+ *
+ * To load and run, simply cat a SP 'program file' to /dev/vpe1.
+ * i.e cat spapp >/dev/vpe1.
+ *
+ * You'll need to have the following device files.
+ * mknod /dev/vpe0 c 63 0
+ * mknod /dev/vpe1 c 63 1
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/bootmem.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+typedef void *vpe_handle;
+
+// defined here because the kernel module loader doesn't have
+// anything to do with it.
+#define SHN_MIPS_SCOMMON 0xff03
+
+#ifndef ARCH_SHF_SMALL
+#define ARCH_SHF_SMALL 0
+#endif
+
+/* If this is set, the section belongs in the init part of the module */
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
+
+// temp number,
+#define VPE_MAJOR 63
+
+static char module_name[] = "vpe";
+static int major = 0;
+
+/* grab the likely amount of memory we will need. */
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+#define P_SIZE (2 * 1024 * 1024)
+#else
+/* add an overhead to the max kmalloc size for non-striped symbols/etc */
+#define P_SIZE (256 * 1024)
+#endif
+
+#define MAX_VPES 16
+
+enum vpe_state {
+ VPE_STATE_UNUSED = 0,
+ VPE_STATE_INUSE,
+ VPE_STATE_RUNNING
+};
+
+enum tc_state {
+ TC_STATE_UNUSED = 0,
+ TC_STATE_INUSE,
+ TC_STATE_RUNNING,
+ TC_STATE_DYNAMIC
+};
+
+struct vpe;
+typedef struct tc {
+ enum tc_state state;
+ int index;
+
+ /* parent VPE */
+ struct vpe *pvpe;
+
+ /* The list of TC's with this VPE */
+ struct list_head tc;
+
+ /* The global list of tc's */
+ struct list_head list;
+} tc_t;
+
+typedef struct vpe {
+ enum vpe_state state;
+
+ /* (device) minor associated with this vpe */
+ int minor;
+
+ /* elfloader stuff */
+ void *load_addr;
+ u32 len;
+ char *pbuffer;
+ u32 plen;
+
+ unsigned long __start;
+
+ /* tc's associated with this vpe */
+ struct list_head tc;
+
+ /* The list of vpe's */
+ struct list_head list;
+
+ /* shared symbol address */
+ void *shared_ptr;
+} vpe_t;
+
+struct vpecontrol_ {
+ /* Virtual processing elements */
+ struct list_head vpe_list;
+
+ /* Thread contexts */
+ struct list_head tc_list;
+} vpecontrol;
+
+static void release_progmem(void *ptr);
+static void dump_vpe(vpe_t * v);
+extern void save_gp_address(unsigned int secbase, unsigned int rel);
+
+/* get the vpe associated with this minor */
+struct vpe *get_vpe(int minor)
+{
+ struct vpe *v;
+
+ list_for_each_entry(v, &vpecontrol.vpe_list, list) {
+ if (v->minor == minor)
+ return v;
+ }
+
+ printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
+ return NULL;
+}
+
+/* get the vpe associated with this minor */
+struct tc *get_tc(int index)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ if (t->index == index)
+ return t;
+ }
+
+ printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
+
+ return NULL;
+}
+
+struct tc *get_tc_unused(void)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ if (t->state == TC_STATE_UNUSED)
+ return t;
+ }
+
+ printk(KERN_DEBUG "VPE: All TC's are in use\n");
+
+ return NULL;
+}
+
+/* allocate a vpe and associate it with this minor (or index) */
+struct vpe *alloc_vpe(int minor)
+{
+ struct vpe *v;
+
+ if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
+ return NULL;
+ }
+
+ memset(v, 0, sizeof(struct vpe));
+
+ INIT_LIST_HEAD(&v->tc);
+ list_add_tail(&v->list, &vpecontrol.vpe_list);
+
+ v->minor = minor;
+ return v;
+}
+
+/* allocate a tc. At startup only tc0 is running, all other can be halted. */
+struct tc *alloc_tc(int index)
+{
+ struct tc *t;
+
+ if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "VPE: alloc_tc no mem\n");
+ return NULL;
+ }
+
+ memset(t, 0, sizeof(struct tc));
+
+ INIT_LIST_HEAD(&t->tc);
+ list_add_tail(&t->list, &vpecontrol.tc_list);
+
+ t->index = index;
+
+ return t;
+}
+
+/* clean up and free everything */
+void release_vpe(struct vpe *v)
+{
+ list_del(&v->list);
+ if (v->load_addr)
+ release_progmem(v);
+ kfree(v);
+}
+
+void dump_mtregs(void)
+{
+ unsigned long val;
+
+ val = read_c0_config3();
+ printk("config3 0x%lx MT %ld\n", val,
+ (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
+
+ val = read_c0_mvpconf0();
+ printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
+ (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
+ val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
+
+ val = read_c0_mvpcontrol();
+ printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
+ (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
+ (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
+ (val & MVPCONTROL_EVP));
+
+ val = read_c0_vpeconf0();
+ printk("VPEConf0 0x%lx MVP %ld\n", val,
+ (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+}
+
+/* Find some VPE program space */
+static void *alloc_progmem(u32 len)
+{
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ /* this means you must tell linux to use less memory than you physically have */
+ return (void *)((max_pfn * PAGE_SIZE) + KSEG0);
+#else
+ // simple grab some mem for now
+ return kmalloc(len, GFP_KERNEL);
+#endif
+}
+
+static void release_progmem(void *ptr)
+{
+#ifndef CONFIG_MIPS_VPE_LOADER_TOM
+ kfree(ptr);
+#endif
+}
+
+/* Update size with this section: return offset. */
+static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
+{
+ long ret;
+
+ ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
+ *size = ret + sechdr->sh_size;
+ return ret;
+}
+
+/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
+ might -- code, read-only data, read-write data, small data. Tally
+ sizes, and place the offsets into sh_entsize fields: high bit means it
+ belongs in init. */
+static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
+ Elf_Shdr * sechdrs, const char *secstrings)
+{
+ static unsigned long const masks[][2] = {
+ /* NOTE: all executable code must be the first section
+ * in this array; otherwise modify the text_size
+ * finder in the two loops below */
+ {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
+ {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
+ {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
+ {ARCH_SHF_SMALL | SHF_ALLOC, 0}
+ };
+ unsigned int m, i;
+
+ for (i = 0; i < hdr->e_shnum; i++)
+ sechdrs[i].sh_entsize = ~0UL;
+
+ for (m = 0; m < ARRAY_SIZE(masks); ++m) {
+ for (i = 0; i < hdr->e_shnum; ++i) {
+ Elf_Shdr *s = &sechdrs[i];
+
+ // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
+ if ((s->sh_flags & masks[m][0]) != masks[m][0]
+ || (s->sh_flags & masks[m][1])
+ || s->sh_entsize != ~0UL)
+ continue;
+ s->sh_entsize = get_offset(&mod->core_size, s);
+ }
+
+ if (m == 0)
+ mod->core_text_size = mod->core_size;
+
+ }
+}
+
+
+/* from module-elf32.c, but subverted a little */
+
+struct mips_hi16 {
+ struct mips_hi16 *next;
+ Elf32_Addr *addr;
+ Elf32_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+static unsigned int gp_offs, gp_addr;
+
+static int apply_r_mips_none(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ return 0;
+}
+
+static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ int rel;
+
+ if( !(*location & 0xffff) ) {
+ rel = (int)v - gp_addr;
+ }
+ else {
+ /* .sbss + gp(relative) + offset */
+ /* kludge! */
+ rel = (int)(short)((int)v + gp_offs +
+ (int)(short)(*location & 0xffff) - gp_addr);
+ }
+
+ if( (rel > 32768) || (rel < -32768) ) {
+ printk(KERN_ERR
+ "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
+ rel, rel);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & 0xffff0000) | (rel & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_pc16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ int rel;
+ rel = (((unsigned int)v - (unsigned int)location));
+ rel >>= 2; // because the offset is in _instructions_ not bytes.
+ rel -= 1; // and one instruction less due to the branch delay slot.
+
+ if( (rel > 32768) || (rel < -32768) ) {
+ printk(KERN_ERR
+ "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & 0xffff0000) | (rel & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_32(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ *location += v;
+
+ return 0;
+}
+
+static int apply_r_mips_26(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
+ return -ENOEXEC;
+ }
+
+/* Not desperately convinced this is a good check of an overflow condition
+ anyway. But it gets in the way of handling undefined weak symbols which
+ we want to set to zero.
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+*/
+
+ *location = (*location & ~0x03ffffff) |
+ ((*location + (v >> 2)) & 0x03ffffff);
+ return 0;
+}
+
+static int apply_r_mips_hi16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ struct mips_hi16 *n;
+
+ /*
+ * We cannot relocate this one now because we don't know the value of
+ * the carry we need to add. Save the information, and let LO16 do the
+ * actual relocation.
+ */
+ n = kmalloc(sizeof *n, GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+
+ n->addr = location;
+ n->value = v;
+ n->next = mips_hi16_list;
+ mips_hi16_list = n;
+
+ return 0;
+}
+
+static int apply_r_mips_lo16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ unsigned long insnlo = *location;
+ Elf32_Addr val, vallo;
+
+ /* Sign extend the addend we extract from the lo insn. */
+ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+ if (mips_hi16_list != NULL) {
+ struct mips_hi16 *l;
+
+ l = mips_hi16_list;
+ while (l != NULL) {
+ struct mips_hi16 *next;
+ unsigned long insn;
+
+ /*
+ * The value for the HI16 had best be the same.
+ */
+ if (v != l->value) {
+ printk("%d != %d\n", v, l->value);
+ goto out_danger;
+ }
+
+
+ /*
+ * Do the HI16 relocation. Note that we actually don't
+ * need to know anything about the LO16 itself, except
+ * where to find the low 16 bits of the addend needed
+ * by the LO16.
+ */
+ insn = *l->addr;
+ val = ((insn & 0xffff) << 16) + vallo;
+ val += v;
+
+ /*
+ * Account for the sign extension that will happen in
+ * the low bits.
+ */
+ val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+ insn = (insn & ~0xffff) | val;
+ *l->addr = insn;
+
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+
+ mips_hi16_list = NULL;
+ }
+
+ /*
+ * Ok, we're done with the HI16 relocs. Now deal with the LO16.
+ */
+ val = v + vallo;
+ insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+ *location = insnlo;
+
+ return 0;
+
+out_danger:
+ printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+ return -ENOEXEC;
+}
+
+static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
+ Elf32_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32,
+ [R_MIPS_26] = apply_r_mips_26,
+ [R_MIPS_HI16] = apply_r_mips_hi16,
+ [R_MIPS_LO16] = apply_r_mips_lo16,
+ [R_MIPS_GPREL16] = apply_r_mips_gprel16,
+ [R_MIPS_PC16] = apply_r_mips_pc16
+};
+
+
+int apply_relocations(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ unsigned int i;
+ Elf32_Addr v;
+ int res;
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ Elf32_Word r_info = rel[i].r_info;
+
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(r_info);
+
+ if (!sym->st_value) {
+ printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
+ me->name, strtab + sym->st_name);
+ /* just print the warning, dont barf */
+ }
+
+ v = sym->st_value;
+
+ res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
+ if( res ) {
+ printk(KERN_DEBUG
+ "relocation error 0x%x sym refer <%s> value 0x%x "
+ "type 0x%x r_info 0x%x\n",
+ (unsigned int)location, strtab + sym->st_name, v,
+ r_info, ELF32_R_TYPE(r_info));
+ }
+
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+void save_gp_address(unsigned int secbase, unsigned int rel)
+{
+ gp_addr = secbase + rel;
+ gp_offs = gp_addr - (secbase & 0xffff0000);
+}
+/* end module-elf32.c */
+
+
+
+/* Change all symbols so that sh_value encodes the pointer directly. */
+static int simplify_symbols(Elf_Shdr * sechdrs,
+ unsigned int symindex,
+ const char *strtab,
+ const char *secstrings,
+ unsigned int nsecs, struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned long secbase, bssbase = 0;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+ int ret = 0, size;
+
+ /* find the .bss section for COMMON symbols */
+ for (i = 0; i < nsecs; i++) {
+ if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
+ bssbase = sechdrs[i].sh_addr;
+ }
+
+ for (i = 1; i < n; i++) {
+ switch (sym[i].st_shndx) {
+ case SHN_COMMON:
+ /* Allocate space for the symbol in the .bss section. st_value is currently size.
+ We want it to have the address of the symbol. */
+
+ size = sym[i].st_value;
+ sym[i].st_value = bssbase;
+
+ bssbase += size;
+ break;
+
+ case SHN_ABS:
+ /* Don't need to do anything */
+ break;
+
+ case SHN_UNDEF:
+ /* ret = -ENOENT; */
+ break;
+
+ case SHN_MIPS_SCOMMON:
+
+ printk(KERN_DEBUG
+ "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+ strtab + sym[i].st_name, sym[i].st_shndx);
+
+ // .sbss section
+ break;
+
+ default:
+ secbase = sechdrs[sym[i].st_shndx].sh_addr;
+
+ if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
+ save_gp_address(secbase, sym[i].st_value);
+ }
+
+ sym[i].st_value += secbase;
+ break;
+ }
+
+ }
+
+ return ret;
+}
+
+#ifdef DEBUG_ELFLOADER
+static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
+ const char *strtab, struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+ printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
+ for (i = 1; i < n; i++) {
+ printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
+ strtab + sym[i].st_name, sym[i].st_value);
+ }
+}
+#endif
+
+static void dump_tc(struct tc *t)
+{
+ printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
+ t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
+ printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+}
+
+static void dump_tclist(void)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ dump_tc(t);
+ }
+}
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(vpe_t * v)
+{
+ unsigned long val;
+ struct tc *t;
+
+ /* check we are the Master VPE */
+ val = read_c0_vpeconf0();
+ if (!(val & VPECONF0_MVP)) {
+ printk(KERN_WARNING
+ "VPE: only Master VPE's are allowed to configure MT\n");
+ return -1;
+ }
+
+ /* disable MT (using dvpe) */
+ dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ if (!list_empty(&v->tc)) {
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ printk(KERN_WARNING "VPE: TC %d is already in use.\n",
+ t->index);
+ return -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
+ v->minor);
+ return -ENOEXEC;
+ }
+
+ settc(t->index);
+
+ val = read_vpe_c0_vpeconf0();
+
+ /* should check it is halted, and not activated */
+ if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
+ printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
+ t->index);
+
+ dump_tclist();
+ return -ENOEXEC;
+ }
+
+ /* Write the address we want it to start running from in the TCPC register. */
+ write_tc_c0_tcrestart((unsigned long)v->__start);
+
+ /* write the sivc_info address to tccontext */
+ write_tc_c0_tccontext((unsigned long)0);
+
+ /* Set up the XTC bit in vpeconf0 to point at our tc */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
+
+ /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
+ val = read_tc_c0_tcstatus();
+ val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+ write_tc_c0_tcstatus(val);
+
+ write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+ /* set up VPE1 */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE
+
+ /*
+ * The sde-kit passes 'memsize' to __start in $a3, so set something
+ * here...
+ * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
+ * DFLT_HEAP_SIZE when you compile your program
+ */
+
+ mttgpr(7, 0);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config(read_c0_config());
+
+ /* clear out any left overs from a previous program */
+ write_vpe_c0_cause(0);
+
+ /* take system out of configuration state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
+ write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
+
+ /* set it running */
+ evpe(EVPE_ENABLE);
+
+ return 0;
+}
+
+static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs,
+ unsigned int symindex, const char *strtab,
+ struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+ for (i = 1; i < n; i++) {
+ if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
+ v->__start = sym[i].st_value;
+ }
+
+ if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
+ v->shared_ptr = (void *)sym[i].st_value;
+ }
+ }
+
+ return 0;
+}
+
+/* Allocates a VPE with some program code space(the load address), copies the contents
+ of the program (p)buffer performing relocatations/etc, free's it when finished.
+*/
+int vpe_elfload(vpe_t * v)
+{
+ Elf_Ehdr *hdr;
+ Elf_Shdr *sechdrs;
+ long err = 0;
+ char *secstrings, *strtab = NULL;
+ unsigned int len, i, symindex = 0, strindex = 0;
+
+ struct module mod; // so we can re-use the relocations code
+
+ memset(&mod, 0, sizeof(struct module));
+ strcpy(mod.name, "VPE dummy prog module");
+
+ hdr = (Elf_Ehdr *) v->pbuffer;
+ len = v->plen;
+
+ /* Sanity checks against insmoding binaries or wrong arch,
+ weird elf version */
+ if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ || hdr->e_type != ET_REL || !elf_check_arch(hdr)
+ || hdr->e_shentsize != sizeof(*sechdrs)) {
+ printk(KERN_WARNING
+ "VPE program, wrong arch or weird elf version\n");
+
+ return -ENOEXEC;
+ }
+
+ if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+ printk(KERN_ERR "VPE program length %u truncated\n", len);
+ return -ENOEXEC;
+ }
+
+ /* Convenience variables */
+ sechdrs = (void *)hdr + hdr->e_shoff;
+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+ sechdrs[0].sh_addr = 0;
+
+ /* And these should exist, but gcc whinges if we don't init them */
+ symindex = strindex = 0;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+
+ if (sechdrs[i].sh_type != SHT_NOBITS
+ && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
+ printk(KERN_ERR "VPE program length %u truncated\n",
+ len);
+ return -ENOEXEC;
+ }
+
+ /* Mark all sections sh_addr with their address in the
+ temporary image. */
+ sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+
+ /* Internal symbols and strings. */
+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ symindex = i;
+ strindex = sechdrs[i].sh_link;
+ strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+ }
+ }
+
+ layout_sections(&mod, hdr, sechdrs, secstrings);
+
+ v->load_addr = alloc_progmem(mod.core_size);
+ memset(v->load_addr, 0, mod.core_size);
+
+ printk("VPE elf_loader: loading to %p\n", v->load_addr);
+
+ for (i = 0; i < hdr->e_shnum; i++) {
+ void *dest;
+
+ if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+ continue;
+
+ dest = v->load_addr + sechdrs[i].sh_entsize;
+
+ if (sechdrs[i].sh_type != SHT_NOBITS)
+ memcpy(dest, (void *)sechdrs[i].sh_addr,
+ sechdrs[i].sh_size);
+ /* Update sh_addr to point to copy in image. */
+ sechdrs[i].sh_addr = (unsigned long)dest;
+ }
+
+ /* Fix up syms, so that st_value is a pointer to location. */
+ err =
+ simplify_symbols(sechdrs, symindex, strtab, secstrings,
+ hdr->e_shnum, &mod);
+ if (err < 0) {
+ printk(KERN_WARNING "VPE: unable to simplify symbols\n");
+ goto cleanup;
+ }
+
+ /* Now do relocations. */
+ for (i = 1; i < hdr->e_shnum; i++) {
+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ unsigned int info = sechdrs[i].sh_info;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ /* Don't bother with non-allocated sections */
+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+ continue;
+
+ if (sechdrs[i].sh_type == SHT_REL)
+ err =
+ apply_relocations(sechdrs, strtab, symindex, i, &mod);
+ else if (sechdrs[i].sh_type == SHT_RELA)
+ err = apply_relocate_add(sechdrs, strtab, symindex, i,
+ &mod);
+ if (err < 0) {
+ printk(KERN_WARNING
+ "vpe_elfload: error in relocations err %ld\n",
+ err);
+ goto cleanup;
+ }
+ }
+
+ /* make sure it's physically written out */
+ flush_icache_range((unsigned long)v->load_addr,
+ (unsigned long)v->load_addr + v->len);
+
+ if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+
+ printk(KERN_WARNING
+ "VPE: program doesn't contain __start or vpe_shared symbols\n");
+ err = -ENOEXEC;
+ }
+
+ printk(" elf loaded\n");
+
+cleanup:
+ return err;
+}
+
+static void dump_vpe(vpe_t * v)
+{
+ struct tc *t;
+
+ printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
+ printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ dump_tc(t);
+ }
+}
+
+/* checks for VPE is unused and gets ready to load program */
+static int vpe_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+ vpe_t *v;
+
+ /* assume only 1 device at the mo. */
+ if ((minor = MINOR(inode->i_rdev)) != 1) {
+ printk(KERN_WARNING "VPE: only vpe1 is supported\n");
+ return -ENODEV;
+ }
+
+ if ((v = get_vpe(minor)) == NULL) {
+ printk(KERN_WARNING "VPE: unable to get vpe\n");
+ return -ENODEV;
+ }
+
+ if (v->state != VPE_STATE_UNUSED) {
+ unsigned long tmp;
+ struct tc *t;
+
+ printk(KERN_WARNING "VPE: device %d already in use\n", minor);
+
+ dvpe();
+ dump_vpe(v);
+
+ printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
+
+ release_progmem(v->load_addr);
+
+ t = get_tc(minor);
+ settc(minor);
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+
+ }
+
+ // allocate it so when we get write ops we know it's expected.
+ v->state = VPE_STATE_INUSE;
+
+ /* this of-course trashes what was there before... */
+ v->pbuffer = vmalloc(P_SIZE);
+ v->plen = P_SIZE;
+ v->load_addr = NULL;
+ v->len = 0;
+
+ return 0;
+}
+
+static int vpe_release(struct inode *inode, struct file *filp)
+{
+ int minor, ret = 0;
+ vpe_t *v;
+ Elf_Ehdr *hdr;
+
+ minor = MINOR(inode->i_rdev);
+ if ((v = get_vpe(minor)) == NULL)
+ return -ENODEV;
+
+ // simple case of fire and forget, so tell the VPE to run...
+
+ hdr = (Elf_Ehdr *) v->pbuffer;
+ if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (vpe_elfload(v) >= 0)
+ vpe_run(v);
+ else {
+ printk(KERN_WARNING "VPE: ELF load failed.\n");
+ ret = -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE: only elf files are supported\n");
+ ret = -ENOEXEC;
+ }
+
+ // cleanup any temp buffers
+ if (v->pbuffer)
+ vfree(v->pbuffer);
+ v->plen = 0;
+ return ret;
+}
+
+static ssize_t vpe_write(struct file *file, const char __user * buffer,
+ size_t count, loff_t * ppos)
+{
+ int minor;
+ size_t ret = count;
+ vpe_t *v;
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ if ((v = get_vpe(minor)) == NULL)
+ return -ENODEV;
+
+ if (v->pbuffer == NULL) {
+ printk(KERN_ERR "vpe_write: no pbuffer\n");
+ return -ENOMEM;
+ }
+
+ if ((count + v->len) > v->plen) {
+ printk(KERN_WARNING
+ "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
+ return -ENOMEM;
+ }
+
+ count -= copy_from_user(v->pbuffer + v->len, buffer, count);
+ if (!count) {
+ printk("vpe_write: copy_to_user failed\n");
+ return -EFAULT;
+ }
+
+ v->len += count;
+ return ret;
+}
+
+static struct file_operations vpe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpe_open,
+ .release = vpe_release,
+ .write = vpe_write
+};
+
+/* module wrapper entry points */
+/* give me a vpe */
+vpe_handle vpe_alloc(void)
+{
+ int i;
+ struct vpe *v;
+
+ /* find a vpe */
+ for (i = 1; i < MAX_VPES; i++) {
+ if ((v = get_vpe(i)) != NULL) {
+ v->state = VPE_STATE_INUSE;
+ return v;
+ }
+ }
+ return NULL;
+}
+
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(vpe_handle vpe, unsigned long start)
+{
+ struct vpe *v = vpe;
+
+ v->__start = start;
+ return vpe_run(v);
+}
+
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(vpe_handle vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ evpe_flags = dvpe();
+
+ if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+ }
+
+ evpe(evpe_flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(vpe_handle vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ return -ENOEXEC;
+ }
+
+ evpe_flags = dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+ /* mark the TC unallocated and halt'ed */
+ write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+ write_tc_c0_tchalt(TCHALT_H);
+
+ v->state = VPE_STATE_UNUSED;
+
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(evpe_flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(vpe_free);
+
+void *vpe_get_shared(int index)
+{
+ struct vpe *v;
+
+ if ((v = get_vpe(index)) == NULL) {
+ printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
+ return NULL;
+ }
+
+ return v->shared_ptr;
+}
+
+EXPORT_SYMBOL(vpe_get_shared);
+
+static int __init vpe_module_init(void)
+{
+ struct vpe *v = NULL;
+ struct tc *t;
+ unsigned long val;
+ int i;
+
+ if (!cpu_has_mipsmt) {
+ printk("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) {
+ printk("VPE loader: unable to register character device\n");
+ return -EBUSY;
+ }
+
+ if (major == 0)
+ major = VPE_MAJOR;
+
+ dmt();
+ dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* dump_mtregs(); */
+
+ INIT_LIST_HEAD(&vpecontrol.vpe_list);
+ INIT_LIST_HEAD(&vpecontrol.tc_list);
+
+ val = read_c0_mvpconf0();
+ for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
+ t = alloc_tc(i);
+
+ /* VPE's */
+ if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
+ settc(i);
+
+ if ((v = alloc_vpe(i)) == NULL) {
+ printk(KERN_WARNING "VPE: unable to allocate VPE\n");
+ return -ENODEV;
+ }
+
+ list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */
+
+ /* deactivate all but vpe0 */
+ if (i != 0) {
+ unsigned long tmp = read_vpe_c0_vpeconf0();
+
+ tmp &= ~VPECONF0_VPA;
+
+ /* master VPE */
+ tmp |= VPECONF0_MVP;
+ write_vpe_c0_vpeconf0(tmp);
+ }
+
+ /* disable multi-threading with TC's */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+ if (i != 0) {
+ write_vpe_c0_status((read_c0_status() &
+ ~(ST0_IM | ST0_IE | ST0_KSU))
+ | ST0_CU0);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config(read_c0_config());
+ }
+
+ }
+
+ /* TC's */
+ t->pvpe = v; /* set the parent vpe */
+
+ if (i != 0) {
+ unsigned long tmp;
+
+ /* tc 0 will of course be running.... */
+ if (i == 0)
+ t->state = TC_STATE_RUNNING;
+
+ settc(i);
+
+ /* bind a TC to each VPE, May as well put all excess TC's
+ on the last VPE */
+ if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
+ write_tc_c0_tcbind(read_tc_c0_tcbind() |
+ ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
+ else
+ write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
+
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+ }
+ }
+
+ /* release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ return 0;
+}
+
+static void __exit vpe_module_exit(void)
+{
+ struct vpe *v, *n;
+
+ list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+ if (v->state != VPE_STATE_UNUSED) {
+ release_vpe(v);
+ }
+ }
+
+ unregister_chrdev(major, module_name);
+}
+
+module_init(vpe_module_init);
+module_exit(vpe_module_exit);
+MODULE_DESCRIPTION("MIPS VPE Loader");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
new file mode 100644
index 0000000..1d2ee8a
--- /dev/null
+++ b/arch/mips/lasat/Kconfig
@@ -0,0 +1,15 @@
+config PICVUE
+ tristate "PICVUE LCD display driver"
+ depends on LASAT
+
+config PICVUE_PROC
+ tristate "PICVUE LCD display driver /proc interface"
+ depends on PICVUE
+
+config DS1603
+ bool "DS1603 RTC driver"
+ depends on LASAT
+
+config LASAT_SYSCTL
+ bool "LASAT sysctl interface"
+ depends on LASAT
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index c90da16..852a419 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -71,14 +71,13 @@
}
static struct hw_interrupt_type lasat_irq_type = {
- "Lasat",
- startup_lasat_irq,
- shutdown_lasat_irq,
- enable_lasat_irq,
- disable_lasat_irq,
- mask_and_ack_lasat_irq,
- end_lasat_irq,
- NULL
+ .typename = "Lasat",
+ .startup = startup_lasat_irq,
+ .shutdown = shutdown_lasat_irq,
+ .enable = enable_lasat_irq,
+ .disable = disable_lasat_irq,
+ .ack = mask_and_ack_lasat_irq,
+ .end = end_lasat_irq,
};
static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index f2604fa..dcd819d 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -155,7 +155,7 @@
}
#endif
-static int __init lasat_setup(void)
+void __init plat_setup(void)
{
int i;
lasat_misc = &lasat_misc_info[mips_machtype];
@@ -185,8 +185,4 @@
change_c0_status(ST0_BEV,0);
prom_printf("Lasat specific initialization complete\n");
-
- return 0;
}
-
-early_initcall(lasat_setup);
diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c
index 019ac8f..46519f4 100644
--- a/arch/mips/lib-32/dump_tlb.c
+++ b/arch/mips/lib-32/dump_tlb.c
@@ -20,16 +20,25 @@
static inline const char *msk2str(unsigned int mask)
{
switch (mask) {
- case PM_4K: return "4kb";
- case PM_16K: return "16kb";
- case PM_64K: return "64kb";
- case PM_256K: return "256kb";
+ case PM_4K:
+ return "4kb";
+ case PM_16K:
+ return "16kb";
+ case PM_64K:
+ return "64kb";
+ case PM_256K:
+ return "256kb";
#ifndef CONFIG_CPU_VR41XX
- case PM_1M: return "1Mb";
- case PM_4M: return "4Mb";
- case PM_16M: return "16Mb";
- case PM_64M: return "64Mb";
- case PM_256M: return "256Mb";
+ case PM_1M:
+ return "1Mb";
+ case PM_4M:
+ return "4Mb";
+ case PM_16M:
+ return "16Mb";
+ case PM_64M:
+ return "64Mb";
+ case PM_256M:
+ return "256Mb";
#endif
}
@@ -47,7 +56,7 @@
unsigned int pagemask, c0, c1, asid;
unsigned long long entrylo0, entrylo1;
unsigned long entryhi;
- int i;
+ int i;
asid = read_c0_entryhi() & 0xff;
@@ -58,7 +67,7 @@
tlb_read();
BARRIER();
pagemask = read_c0_pagemask();
- entryhi = read_c0_entryhi();
+ entryhi = read_c0_entryhi();
entrylo0 = read_c0_entrylo0();
entrylo1 = read_c0_entrylo1();
@@ -78,13 +87,11 @@
printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
(entrylo0 << 6) & PAGE_MASK, c0,
(entrylo0 & 4) ? 1 : 0,
- (entrylo0 & 2) ? 1 : 0,
- (entrylo0 & 1));
+ (entrylo0 & 2) ? 1 : 0, (entrylo0 & 1));
printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
(entrylo1 << 6) & PAGE_MASK, c1,
(entrylo1 & 4) ? 1 : 0,
- (entrylo1 & 2) ? 1 : 0,
- (entrylo1 & 1));
+ (entrylo1 & 2) ? 1 : 0, (entrylo1 & 1));
printk("\n");
}
}
@@ -99,7 +106,7 @@
void dump_tlb_wired(void)
{
- int wired;
+ int wired;
wired = read_c0_wired();
printk("Wired: %d", wired);
@@ -138,9 +145,10 @@
void dump_list_process(struct task_struct *t, void *address)
{
- pgd_t *page_dir, *pgd;
- pmd_t *pmd;
- pte_t *pte, page;
+ pgd_t *page_dir, *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte, page;
unsigned long addr, val;
addr = (unsigned long) address;
@@ -152,21 +160,27 @@
if (addr > KSEG0)
page_dir = pgd_offset_k(0);
- else
+ else if (t->mm) {
page_dir = pgd_offset(t->mm, 0);
- printk("page_dir == %08x\n", (unsigned int) page_dir);
+ printk("page_dir == %08x\n", (unsigned int) page_dir);
+ } else
+ printk("Current thread has no mm\n");
if (addr > KSEG0)
pgd = pgd_offset_k(addr);
- else
+ else if (t->mm) {
pgd = pgd_offset(t->mm, addr);
- printk("pgd == %08x, ", (unsigned int) pgd);
+ printk("pgd == %08x, ", (unsigned int) pgd);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %08x, ", (unsigned int) pud);
- pmd = pmd_offset(pgd, addr);
- printk("pmd == %08x, ", (unsigned int) pmd);
+ pmd = pmd_offset(pud, addr);
+ printk("pmd == %08x, ", (unsigned int) pmd);
- pte = pte_offset(pmd, addr);
- printk("pte == %08x, ", (unsigned int) pte);
+ pte = pte_offset(pmd, addr);
+ printk("pte == %08x, ", (unsigned int) pte);
+ } else
+ printk("Current thread has no mm\n");
page = *pte;
#ifdef CONFIG_64BIT_PHYS_ADDR
@@ -176,14 +190,22 @@
#endif
val = pte_val(page);
- if (val & _PAGE_PRESENT) printk("present ");
- if (val & _PAGE_READ) printk("read ");
- if (val & _PAGE_WRITE) printk("write ");
- if (val & _PAGE_ACCESSED) printk("accessed ");
- if (val & _PAGE_MODIFIED) printk("modified ");
- if (val & _PAGE_R4KBUG) printk("r4kbug ");
- if (val & _PAGE_GLOBAL) printk("global ");
- if (val & _PAGE_VALID) printk("valid ");
+ if (val & _PAGE_PRESENT)
+ printk("present ");
+ if (val & _PAGE_READ)
+ printk("read ");
+ if (val & _PAGE_WRITE)
+ printk("write ");
+ if (val & _PAGE_ACCESSED)
+ printk("accessed ");
+ if (val & _PAGE_MODIFIED)
+ printk("modified ");
+ if (val & _PAGE_R4KBUG)
+ printk("r4kbug ");
+ if (val & _PAGE_GLOBAL)
+ printk("global ");
+ if (val & _PAGE_VALID)
+ printk("valid ");
printk("\n");
}
@@ -194,14 +216,16 @@
unsigned int vtop(void *address)
{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
unsigned int addr, paddr;
addr = (unsigned long) address;
pgd = pgd_offset(current->mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
paddr |= (addr & ~PAGE_MASK);
@@ -214,9 +238,9 @@
int i;
for (i = 0; i < 8; i++) {
- printk("*%08lx == %08lx, ", (unsigned long)p, *p);
+ printk("*%08lx == %08lx, ", (unsigned long) p, *p);
p++;
- printk("*%08lx == %08lx\n", (unsigned long)p, *p);
+ printk("*%08lx == %08lx\n", (unsigned long) p, *p);
p++;
}
}
diff --git a/arch/mips/lib-32/r3k_dump_tlb.c b/arch/mips/lib-32/r3k_dump_tlb.c
index a878224..4f2cb74 100644
--- a/arch/mips/lib-32/r3k_dump_tlb.c
+++ b/arch/mips/lib-32/r3k_dump_tlb.c
@@ -105,6 +105,7 @@
void dump_list_process(struct task_struct *t, void *address)
{
pgd_t *page_dir, *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte, page;
unsigned int addr;
@@ -121,7 +122,10 @@
pgd = pgd_offset(t->mm, addr);
printk("pgd == %08x, ", (unsigned int) pgd);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %08x, ", (unsigned int) pud);
+
+ pmd = pmd_offset(pud, addr);
printk("pmd == %08x, ", (unsigned int) pmd);
pte = pte_offset(pmd, addr);
@@ -149,13 +153,15 @@
unsigned int vtop(void *address)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
unsigned int addr, paddr;
addr = (unsigned long) address;
pgd = pgd_offset(current->mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c
index 42f88e0..11a5f01 100644
--- a/arch/mips/lib-64/dump_tlb.c
+++ b/arch/mips/lib-64/dump_tlb.c
@@ -140,6 +140,7 @@
void dump_list_process(struct task_struct *t, void *address)
{
pgd_t *page_dir, *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte, page;
unsigned long addr, val;
@@ -155,7 +156,10 @@
pgd = pgd_offset(t->mm, addr);
printk("pgd == %016lx\n", (unsigned long) pgd);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %016lx\n", (unsigned long) pud);
+
+ pmd = pmd_offset(pud, addr);
printk("pmd == %016lx\n", (unsigned long) pmd);
pte = pte_offset(pmd, addr);
@@ -184,13 +188,15 @@
unsigned int vtop(void *address)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
unsigned int addr, paddr;
addr = (unsigned long) address;
pgd = pgd_offset(current->mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
paddr = (CKSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 0373034..cf12caf 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,8 @@
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial_copy.o memcpy.o promlib.o \
- strlen_user.o strncpy_user.o strnlen_user.o
+lib-y += csum_partial_copy.o memcpy.o promlib.o strlen_user.o strncpy_user.o \
+ strnlen_user.o uncached.o
obj-y += iomap.o
diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c
index ffed0a6..6e9f366 100644
--- a/arch/mips/lib/csum_partial_copy.c
+++ b/arch/mips/lib/csum_partial_copy.c
@@ -16,8 +16,8 @@
/*
* copy while checksumming, otherwise like csum_partial
*/
-unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst,
- int len, unsigned int sum)
+unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+ unsigned char *dst, int len, unsigned int sum)
{
/*
* It's 2:30 am and I don't feel like doing it real ...
@@ -33,8 +33,8 @@
* Copy from userspace and compute checksum. If we catch an exception
* then zero the rest of the buffer.
*/
-unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst,
- int len, unsigned int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user (const unsigned char __user *src,
+ unsigned char *dst, int len, unsigned int sum, int *err_ptr)
{
int missing;
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index a78865f..7f9aafa 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -13,6 +13,21 @@
* Mnemonic names for arguments to memcpy/__copy_user
*/
#include <linux/config.h>
+
+/*
+ * Hack to resolve longstanding prefetch issue
+ *
+ * Prefetching may be fatal on some systems if we're prefetching beyond the
+ * end of memory on some systems. It's also a seriously bad idea on non
+ * dma-coherent systems.
+ */
+#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
new file mode 100644
index 0000000..98ce89f
--- /dev/null
+++ b/arch/mips/lib/uncached.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Thiemo Seufer
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ */
+
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/bug.h>
+
+#ifndef CKSEG2
+#define CKSEG2 CKSSEG
+#endif
+#ifndef TO_PHYS_MASK
+#define TO_PHYS_MASK -1
+#endif
+
+/*
+ * FUNC is executed in one of the uncached segments, depending on its
+ * original address as follows:
+ *
+ * 1. If the original address is in CKSEG0 or CKSEG1, then the uncached
+ * segment used is CKSEG1.
+ * 2. If the original address is in XKPHYS, then the uncached segment
+ * used is XKPHYS(2).
+ * 3. Otherwise it's a bug.
+ *
+ * The same remapping is done with the stack pointer. Stack handling
+ * works because we don't handle stack arguments or more complex return
+ * values, so we can avoid sharing the same stack area between a cached
+ * and the uncached mode.
+ */
+unsigned long __init run_uncached(void *func)
+{
+ register long sp __asm__("$sp");
+ register long ret __asm__("$2");
+ long lfunc = (long)func, ufunc;
+ long usp;
+
+ if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
+ usp = CKSEG1ADDR(sp);
+ else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+ (long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0))
+ usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+ XKPHYS_TO_PHYS((long long)sp));
+ else {
+ BUG();
+ usp = sp;
+ }
+ if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2)
+ ufunc = CKSEG1ADDR(lfunc);
+ else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+ (long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0))
+ ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+ XKPHYS_TO_PHYS((long long)lfunc));
+ else {
+ BUG();
+ ufunc = lfunc;
+ }
+
+ __asm__ __volatile__ (
+ " move $16, $sp\n"
+ " move $sp, %1\n"
+ " jalr %2\n"
+ " move $sp, $16"
+ : "=r" (ret)
+ : "r" (usp), "r" (ufunc)
+ : "$16", "$31");
+
+ return ret;
+}
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 99c5506..aa5818a 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -70,7 +70,7 @@
/* Further private data for which no space exists in mips_fpu_soft_struct */
-struct mips_fpu_emulator_private fpuemuprivate;
+struct mips_fpu_emulator_stats fpuemustats;
/* Control registers */
@@ -79,7 +79,17 @@
/* Convert Mips rounding mode (0..3) to IEEE library modes. */
static const unsigned char ieee_rm[4] = {
- IEEE754_RN, IEEE754_RZ, IEEE754_RU, IEEE754_RD
+ [FPU_CSR_RN] = IEEE754_RN,
+ [FPU_CSR_RZ] = IEEE754_RZ,
+ [FPU_CSR_RU] = IEEE754_RU,
+ [FPU_CSR_RD] = IEEE754_RD,
+};
+/* Convert IEEE library modes to Mips rounding mode (0..3). */
+static const unsigned char mips_rm[4] = {
+ [IEEE754_RN] = FPU_CSR_RN,
+ [IEEE754_RZ] = FPU_CSR_RZ,
+ [IEEE754_RD] = FPU_CSR_RD,
+ [IEEE754_RU] = FPU_CSR_RU,
};
#if __mips >= 4
@@ -196,11 +206,11 @@
static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
{
mips_instruction ir;
- vaddr_t emulpc, contpc;
+ void * emulpc, *contpc;
unsigned int cond;
- if (get_user(ir, (mips_instruction *) xcp->cp0_epc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
@@ -221,41 +231,39 @@
* Linux MIPS branch emulator operates on context, updating the
* cp0_epc.
*/
- emulpc = REG_TO_VA(xcp->cp0_epc + 4); /* Snapshot emulation target */
+ emulpc = (void *) (xcp->cp0_epc + 4); /* Snapshot emulation target */
if (__compute_return_epc(xcp)) {
#ifdef CP1DBG
printk("failed to emulate branch at %p\n",
- REG_TO_VA(xcp->cp0_epc));
+ (void *) (xcp->cp0_epc));
#endif
return SIGILL;
}
- if (get_user(ir, (mips_instruction *) emulpc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(ir, (mips_instruction __user *) emulpc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
/* __compute_return_epc() will have updated cp0_epc */
- contpc = REG_TO_VA xcp->cp0_epc;
+ contpc = (void *) xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
- xcp->cp0_epc = VA_TO_REG emulpc - 4;
- }
- else {
- emulpc = REG_TO_VA xcp->cp0_epc;
- contpc = REG_TO_VA(xcp->cp0_epc + 4);
+ xcp->cp0_epc = (unsigned long) emulpc - 4;
+ } else {
+ emulpc = (void *) xcp->cp0_epc;
+ contpc = (void *) (xcp->cp0_epc + 4);
}
emul:
- fpuemuprivate.stats.emulated++;
+ fpuemustats.emulated++;
switch (MIPSInst_OPCODE(ir)) {
-#ifndef SINGLE_ONLY_FPU
case ldc1_op:{
- u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u64 val;
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
DITOREG(val, MIPSInst_RT(ir));
@@ -263,55 +271,42 @@
}
case sdc1_op:{
- u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u64 val;
- fpuemuprivate.stats.stores++;
+ fpuemustats.stores++;
DIFROMREG(val, MIPSInst_RT(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
}
-#endif
case lwc1_op:{
- u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u32 val;
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RT(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
SITOREG(val, MIPSInst_RT(ir));
break;
}
case swc1_op:{
- u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u32 val;
- fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RT(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
+ fpuemustats.stores++;
SIFROMREG(val, MIPSInst_RT(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
@@ -320,7 +315,7 @@
case cop1_op:
switch (MIPSInst_RS(ir)) {
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case dmfc_op:
/* copregister fs -> gpr[rt] */
if (MIPSInst_RT(ir) != 0) {
@@ -337,12 +332,6 @@
case mfc_op:
/* copregister rd -> gpr[rt] */
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RD(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
if (MIPSInst_RT(ir) != 0) {
SIFROMREG(xcp->regs[MIPSInst_RT(ir)],
MIPSInst_RD(ir));
@@ -351,12 +340,6 @@
case mtc_op:
/* copregister rd <- rt */
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RD(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
SITOREG(xcp->regs[MIPSInst_RT(ir)], MIPSInst_RD(ir));
break;
@@ -369,9 +352,10 @@
}
if (MIPSInst_RD(ir) == FPCREG_CSR) {
value = ctx->fcr31;
+ value = (value & ~0x3) | mips_rm[value & 0x3];
#ifdef CSRTRACE
printk("%p gpr[%d]<-csr=%08x\n",
- REG_TO_VA(xcp->cp0_epc),
+ (void *) (xcp->cp0_epc),
MIPSInst_RT(ir), value);
#endif
}
@@ -398,14 +382,13 @@
if (MIPSInst_RD(ir) == FPCREG_CSR) {
#ifdef CSRTRACE
printk("%p gpr[%d]->csr=%08x\n",
- REG_TO_VA(xcp->cp0_epc),
+ (void *) (xcp->cp0_epc),
MIPSInst_RT(ir), value);
#endif
- ctx->fcr31 = value;
- /* copy new rounding mode and
- flush bit to ieee library state! */
- ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
- ieee754_csr.rm = ieee_rm[value & 0x3];
+ value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+ ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+ /* convert to ieee library modes */
+ ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
}
if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
return SIGFPE;
@@ -445,20 +428,20 @@
* instruction
*/
xcp->cp0_epc += 4;
- contpc = REG_TO_VA
+ contpc = (void *)
(xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
- if (get_user(ir, (mips_instruction *)
- REG_TO_VA xcp->cp0_epc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(ir,
+ (mips_instruction __user *) xcp->cp0_epc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
switch (MIPSInst_OPCODE(ir)) {
case lwc1_op:
case swc1_op:
-#if (__mips >= 2 || __mips64) && !defined(SINGLE_ONLY_FPU)
+#if (__mips >= 2 || defined(__mips64))
case ldc1_op:
case sdc1_op:
#endif
@@ -480,7 +463,7 @@
* Single step the non-cp1
* instruction in the dslot
*/
- return mips_dsemul(xcp, ir, VA_TO_REG contpc);
+ return mips_dsemul(xcp, ir, (unsigned long) contpc);
}
else {
/* branch not taken */
@@ -539,8 +522,9 @@
}
/* we did it !! */
- xcp->cp0_epc = VA_TO_REG(contpc);
+ xcp->cp0_epc = (unsigned long) contpc;
xcp->cp0_cause &= ~CAUSEF_BD;
+
return 0;
}
@@ -570,7 +554,7 @@
static ieee754##p fpemu_##p##_##name (ieee754##p r, ieee754##p s, \
ieee754##p t) \
{ \
- struct ieee754_csr ieee754_csr_save; \
+ struct _ieee754_csr ieee754_csr_save; \
s = f1 (s, t); \
ieee754_csr_save = ieee754_csr; \
s = f2 (s, r); \
@@ -616,54 +600,38 @@
{
unsigned rcsr = 0; /* resulting csr */
- fpuemuprivate.stats.cp1xops++;
+ fpuemustats.cp1xops++;
switch (MIPSInst_FMA_FFMT(ir)) {
case s_fmt:{ /* 0 */
ieee754sp(*handler) (ieee754sp, ieee754sp, ieee754sp);
ieee754sp fd, fr, fs, ft;
- u32 *va;
+ u32 __user *va;
u32 val;
switch (MIPSInst_FUNC(ir)) {
case lwxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_FD(ir) & 1) {
- /* illegal register in single-float
- * mode
- */
- return SIGILL;
- }
-#endif
SITOREG(val, MIPSInst_FD(ir));
break;
case swxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_FS(ir) & 1) {
- /* illegal register in single-float
- * mode
- */
- return SIGILL;
- }
-#endif
+ fpuemustats.stores++;
SIFROMREG(val, MIPSInst_FS(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
@@ -699,8 +667,6 @@
rcsr |= FPU_CSR_INV_X | FPU_CSR_INV_S;
ctx->fcr31 = (ctx->fcr31 & ~FPU_CSR_ALL_X) | rcsr;
- if (ieee754_csr.nod)
- ctx->fcr31 |= 0x1000000;
if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
/*printk ("SIGFPE: fpu csr = %08x\n",
ctx->fcr31); */
@@ -715,34 +681,33 @@
break;
}
-#ifndef SINGLE_ONLY_FPU
case d_fmt:{ /* 1 */
ieee754dp(*handler) (ieee754dp, ieee754dp, ieee754dp);
ieee754dp fd, fr, fs, ft;
- u64 *va;
+ u64 __user *va;
u64 val;
switch (MIPSInst_FUNC(ir)) {
case ldxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
DITOREG(val, MIPSInst_FD(ir));
break;
case sdxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.stores++;
+ fpuemustats.stores++;
DIFROMREG(val, MIPSInst_FS(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
@@ -773,7 +738,6 @@
}
break;
}
-#endif
case 0x7: /* 7 */
if (MIPSInst_FUNC(ir) != pfetch_op) {
@@ -810,7 +774,7 @@
#endif
} rv; /* resulting value */
- fpuemuprivate.stats.cp1ops++;
+ fpuemustats.cp1ops++;
switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) {
case s_fmt:{ /* 0 */
union {
@@ -834,7 +798,7 @@
goto scopbop;
/* unary ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fsqrt_op:
handler.u = ieee754sp_sqrt;
goto scopuop;
@@ -913,9 +877,6 @@
case fcvts_op:
return SIGILL; /* not defined */
case fcvtd_op:{
-#ifdef SINGLE_ONLY_FPU
- return SIGILL; /* not defined */
-#else
ieee754sp fs;
SPFROMREG(fs, MIPSInst_FS(ir));
@@ -923,7 +884,6 @@
rfmt = d_fmt;
goto copcsr;
}
-#endif
case fcvtw_op:{
ieee754sp fs;
@@ -933,7 +893,7 @@
goto copcsr;
}
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fround_op:
case ftrunc_op:
case fceil_op:
@@ -950,7 +910,7 @@
}
#endif /* __mips >= 2 */
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case fcvtl_op:{
ieee754sp fs;
@@ -974,7 +934,7 @@
rfmt = l_fmt;
goto copcsr;
}
-#endif /* __mips64 && !fpu(single) */
+#endif /* defined(__mips64) */
default:
if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1001,7 +961,6 @@
break;
}
-#ifndef SINGLE_ONLY_FPU
case d_fmt:{
union {
ieee754dp(*b) (ieee754dp, ieee754dp);
@@ -1024,7 +983,7 @@
goto dcopbop;
/* unary ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fsqrt_op:
handler.u = ieee754dp_sqrt;
goto dcopuop;
@@ -1108,7 +1067,7 @@
goto copcsr;
}
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fround_op:
case ftrunc_op:
case fceil_op:
@@ -1125,7 +1084,7 @@
}
#endif
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case fcvtl_op:{
ieee754dp fs;
@@ -1149,7 +1108,7 @@
rfmt = l_fmt;
goto copcsr;
}
-#endif /* __mips >= 3 && !fpu(single) */
+#endif /* __mips >= 3 */
default:
if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1177,7 +1136,6 @@
}
break;
}
-#endif /* ifndef SINGLE_ONLY_FPU */
case w_fmt:{
ieee754sp fs;
@@ -1189,21 +1147,19 @@
rv.s = ieee754sp_fint(fs.bits);
rfmt = s_fmt;
goto copcsr;
-#ifndef SINGLE_ONLY_FPU
case fcvtd_op:
/* convert word to double precision real */
SPFROMREG(fs, MIPSInst_FS(ir));
rv.d = ieee754dp_fint(fs.bits);
rfmt = d_fmt;
goto copcsr;
-#endif
default:
return SIGILL;
}
break;
}
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case l_fmt:{
switch (MIPSInst_FUNC(ir)) {
case fcvts_op:
@@ -1256,18 +1212,16 @@
ctx->fcr31 &= ~cond;
break;
}
-#ifndef SINGLE_ONLY_FPU
case d_fmt:
DPTOREG(rv.d, MIPSInst_FD(ir));
break;
-#endif
case s_fmt:
SPTOREG(rv.s, MIPSInst_FD(ir));
break;
case w_fmt:
SITOREG(rv.w, MIPSInst_FD(ir));
break;
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case l_fmt:
DITOREG(rv.l, MIPSInst_FD(ir));
break;
@@ -1279,10 +1233,10 @@
return 0;
}
-int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_soft_struct *ctx)
{
- gpreg_t oldepc, prevepc;
+ unsigned long oldepc, prevepc;
mips_instruction insn;
int sig = 0;
@@ -1290,19 +1244,24 @@
do {
prevepc = xcp->cp0_epc;
- if (get_user(insn, (mips_instruction *) xcp->cp0_epc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
if (insn == 0)
xcp->cp0_epc += 4; /* skip nops */
else {
- /* Update ieee754_csr. Only relevant if we have a
- h/w FPU */
- ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
- ieee754_csr.rm = ieee_rm[ctx->fcr31 & 0x3];
- ieee754_csr.cx = (ctx->fcr31 >> 12) & 0x1f;
+ /*
+ * The 'ieee754_csr' is an alias of
+ * ctx->fcr31. No need to copy ctx->fcr31 to
+ * ieee754_csr. But ieee754_csr.rm is ieee
+ * library modes. (not mips rounding mode)
+ */
+ /* convert to ieee library modes */
+ ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
sig = cop1Emulate(xcp, ctx);
+ /* revert to mips rounding mode */
+ ieee754_csr.rm = mips_rm[ieee754_csr.rm];
}
if (cpu_has_fpu)
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index c35e871..032328c 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -37,7 +37,7 @@
ieee754dp ieee754dp_sqrt(ieee754dp x)
{
- struct ieee754_csr oldcsr;
+ struct _ieee754_csr oldcsr;
ieee754dp y, z, t;
unsigned scalx, yh;
COMPXDP;
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index aa989c2..8079f3d 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -28,9 +28,6 @@
#endif
#define __mips 4
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
-
/*
* Emulate the arbritrary instruction ir at xcp->cp0_epc. Required when
* we have to emulate the instruction in a COP1 branch delay slot. Do
@@ -52,10 +49,10 @@
mips_instruction emul;
mips_instruction badinst;
mips_instruction cookie;
- gpreg_t epc;
+ unsigned long epc;
};
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
+int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
{
extern asmlinkage void handle_dsemulret(void);
mips_instruction *dsemul_insns;
@@ -91,7 +88,7 @@
*/
/* Ensure that the two instructions are in the same cache line */
- dsemul_insns = (mips_instruction *) REG_TO_VA ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
+ dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
fr = (struct emuframe *) dsemul_insns;
/* Verify that the stack pointer is not competely insane */
@@ -104,11 +101,11 @@
err |= __put_user(cpc, &fr->epc);
if (unlikely(err)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
- regs->cp0_epc = VA_TO_REG & fr->emul;
+ regs->cp0_epc = (unsigned long) &fr->emul;
flush_cache_sigtramp((unsigned long)&fr->badinst);
@@ -118,7 +115,7 @@
int do_dsemulret(struct pt_regs *xcp)
{
struct emuframe *fr;
- gpreg_t epc;
+ unsigned long epc;
u32 insn, cookie;
int err = 0;
@@ -141,7 +138,7 @@
err |= __get_user(cookie, &fr->cookie);
if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return 0;
}
diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h
index dbd85f9..091f0e7 100644
--- a/arch/mips/math-emu/dsemul.h
+++ b/arch/mips/math-emu/dsemul.h
@@ -1,11 +1,5 @@
-typedef long gpreg_t;
-typedef void *vaddr_t;
-
-#define REG_TO_VA (vaddr_t)
-#define VA_TO_REG (gpreg_t)
-
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc);
-int do_dsemulret(struct pt_regs *xcp);
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
/* Instruction which will always cause an address error */
#define AdELOAD 0x8c000001 /* lw $0,1($0) */
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index f0a364a..a93c45d 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -31,6 +31,8 @@
#include "ieee754int.h"
+#include "ieee754sp.h"
+#include "ieee754dp.h"
#define DP_EBIAS 1023
#define DP_EMIN (-1022)
@@ -40,20 +42,6 @@
#define SP_EMIN (-126)
#define SP_EMAX 127
-/* indexed by class */
-const char *const ieee754_cname[] = {
- "Normal",
- "Zero",
- "Denormal",
- "Infinity",
- "QNaN",
- "SNaN",
-};
-
-/* the control status register
-*/
-struct ieee754_csr ieee754_csr;
-
/* special constants
*/
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index b8772f4..171f177 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -1,13 +1,8 @@
-/* single and double precision fp ops
- * missing extended precision.
-*/
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
* http://www.algor.co.uk
*
- * ########################################################################
- *
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
@@ -21,20 +16,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
- * ########################################################################
- */
-
-/**************************************************************************
* Nov 7, 2000
* Modification to allow integration with Linux kernel
*
* Kevin D. Kissell, kevink@mips.com and Carsten Langgard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *************************************************************************/
+ */
+#ifndef __ARCH_MIPS_MATH_EMU_IEEE754_H
+#define __ARCH_MIPS_MATH_EMU_IEEE754_H
-#ifdef __KERNEL__
-/* Going from Algorithmics to Linux native environment, add this */
+#include <asm/byteorder.h>
#include <linux/types.h>
+#include <linux/sched.h>
/*
* Not very pretty, but the Linux kernel's normal va_list definition
@@ -44,18 +37,7 @@
#include <stdarg.h>
#endif
-#else
-
-/* Note that __KERNEL__ is taken to mean Linux kernel */
-
-#if #system(OpenBSD)
-#include <machine/types.h>
-#endif
-#include <machine/endian.h>
-
-#endif /* __KERNEL__ */
-
-#if (defined(BYTE_ORDER) && BYTE_ORDER == LITTLE_ENDIAN) || defined(__MIPSEL__)
+#ifdef __LITTLE_ENDIAN
struct ieee754dp_konst {
unsigned mantlo:32;
unsigned manthi:20;
@@ -86,13 +68,14 @@
} ieee754sp;
#endif
-#if (defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN) || defined(__MIPSEB__)
+#ifdef __BIG_ENDIAN
struct ieee754dp_konst {
unsigned sign:1;
unsigned bexp:11;
unsigned manthi:20;
unsigned mantlo:32;
};
+
typedef union _ieee754dp {
struct ieee754dp_konst oparts;
struct {
@@ -222,7 +205,6 @@
#define IEEE754_CLASS_INF 0x03
#define IEEE754_CLASS_SNAN 0x04
#define IEEE754_CLASS_QNAN 0x05
-extern const char *const ieee754_cname[];
/* exception numbers */
#define IEEE754_INEXACT 0x01
@@ -251,93 +233,109 @@
/* "normal" comparisons
*/
-static __inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CEQ, 0);
}
-static __inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y,
IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
}
-static __inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CLT, 0);
}
-static __inline int ieee754sp_le(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_le(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
}
-static __inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CGT, 0);
}
-static __inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
}
-static __inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CEQ, 0);
}
-static __inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y,
IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
}
-static __inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CLT, 0);
}
-static __inline int ieee754dp_le(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_le(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
}
-static __inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CGT, 0);
}
-static __inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
}
-/* like strtod
-*/
+/*
+ * Like strtod
+ */
ieee754dp ieee754dp_fstr(const char *s, char **endp);
char *ieee754dp_tstr(ieee754dp x, int prec, int fmt, int af);
-/* the control status register
-*/
-struct ieee754_csr {
- unsigned pad:13;
+/*
+ * The control status register
+ */
+struct _ieee754_csr {
+#ifdef __BIG_ENDIAN
+ unsigned pad0:7;
unsigned nod:1; /* set 1 for no denormalised numbers */
- unsigned cx:5; /* exceptions this operation */
+ unsigned c:1; /* condition */
+ unsigned pad1:5;
+ unsigned cx:6; /* exceptions this operation */
unsigned mx:5; /* exception enable mask */
unsigned sx:5; /* exceptions total */
unsigned rm:2; /* current rounding mode */
+#endif
+#ifdef __LITTLE_ENDIAN
+ unsigned rm:2; /* current rounding mode */
+ unsigned sx:5; /* exceptions total */
+ unsigned mx:5; /* exception enable mask */
+ unsigned cx:6; /* exceptions this operation */
+ unsigned pad1:5;
+ unsigned c:1; /* condition */
+ unsigned nod:1; /* set 1 for no denormalised numbers */
+ unsigned pad0:7;
+#endif
};
-extern struct ieee754_csr ieee754_csr;
+#define ieee754_csr (*(struct _ieee754_csr *)(¤t->thread.fpu.soft.fcr31))
-static __inline unsigned ieee754_getrm(void)
+static inline unsigned ieee754_getrm(void)
{
return (ieee754_csr.rm);
}
-static __inline unsigned ieee754_setrm(unsigned rm)
+static inline unsigned ieee754_setrm(unsigned rm)
{
return (ieee754_csr.rm = rm);
}
@@ -345,14 +343,14 @@
/*
* get current exceptions
*/
-static __inline unsigned ieee754_getcx(void)
+static inline unsigned ieee754_getcx(void)
{
return (ieee754_csr.cx);
}
/* test for current exception condition
*/
-static __inline int ieee754_cxtest(unsigned n)
+static inline int ieee754_cxtest(unsigned n)
{
return (ieee754_csr.cx & n);
}
@@ -360,21 +358,21 @@
/*
* get sticky exceptions
*/
-static __inline unsigned ieee754_getsx(void)
+static inline unsigned ieee754_getsx(void)
{
return (ieee754_csr.sx);
}
/* clear sticky conditions
*/
-static __inline unsigned ieee754_clrsx(void)
+static inline unsigned ieee754_clrsx(void)
{
return (ieee754_csr.sx = 0);
}
/* test for sticky exception condition
*/
-static __inline int ieee754_sxtest(unsigned n)
+static inline int ieee754_sxtest(unsigned n)
{
return (ieee754_csr.sx & n);
}
@@ -406,52 +404,34 @@
#define ieee754dp_spcvals ((const ieee754dp *)__ieee754dp_spcvals)
#define ieee754sp_spcvals ((const ieee754sp *)__ieee754sp_spcvals)
-/* return infinity with given sign
-*/
-#define ieee754dp_inf(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754dp_zero(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754dp_one(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754dp_ten(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754dp_indef() \
- (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754dp_max(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754dp_min(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754dp_mind(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754dp_1e31() \
- (ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754dp_1e63() \
- (ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
+/*
+ * Return infinity with given sign
+ */
+#define ieee754dp_inf(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754dp_zero(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754dp_one(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754dp_ten(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754dp_indef() (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754dp_max(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754dp_min(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754dp_mind(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754dp_1e31() (ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754dp_1e63() (ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
-#define ieee754sp_inf(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754sp_zero(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754sp_one(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754sp_ten(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754sp_indef() \
- (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754sp_max(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754sp_min(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754sp_mind(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754sp_1e31() \
- (ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754sp_1e63() \
- (ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
+#define ieee754sp_inf(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754sp_zero(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754sp_one(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754sp_ten(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754sp_indef() (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754sp_max(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754sp_min(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754sp_mind(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754sp_1e31() (ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754sp_1e63() (ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
-/* indefinite integer value
-*/
+/*
+ * Indefinite integer value
+ */
#define ieee754si_indef() INT_MAX
#ifdef LONG_LONG_MAX
#define ieee754di_indef() LONG_LONG_MAX
@@ -487,3 +467,5 @@
/* compat */
#define ieee754dp_fix(x) ieee754dp_tint(x)
#define ieee754sp_fix(x) ieee754sp_tint(x)
+
+#endif /* __ARCH_MIPS_MATH_EMU_IEEE754_H */
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 4002f0c..d187ab7 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -27,8 +27,6 @@
#include <asm/fpu_emulator.h>
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
#define SIGNALLING_NAN 0x7ff800007ff80000LL
void fpu_emulator_init_fpu(void)
@@ -65,7 +63,6 @@
&sc->sc_fpregs[i]);
}
err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
@@ -81,7 +78,6 @@
&sc->sc_fpregs[i]);
}
err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
@@ -102,7 +98,6 @@
&sc->sc_fpregs[i]);
}
err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
@@ -118,7 +113,6 @@
&sc->sc_fpregs[i]);
}
err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index 19d4b07..bc0ebc6 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -76,14 +76,13 @@
}
static struct hw_interrupt_type atlas_irq_type = {
- "Atlas",
- startup_atlas_irq,
- shutdown_atlas_irq,
- enable_atlas_irq,
- disable_atlas_irq,
- mask_and_ack_atlas_irq,
- end_atlas_irq,
- NULL
+ .typename = "Atlas",
+ .startup = startup_atlas_irq,
+ .shutdown = shutdown_atlas_irq,
+ .enable = enable_atlas_irq,
+ .disable = disable_atlas_irq,
+ .ack = mask_and_ack_atlas_irq,
+ .end = end_atlas_irq,
};
static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 0a1dd9b..625843b 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -50,8 +50,10 @@
return "MIPS Atlas";
}
-static int __init atlas_setup(void)
+void __init plat_setup(void)
{
+ mips_pcibios_init();
+
ioport_resource.end = 0x7fffffff;
serial_init ();
@@ -64,12 +66,8 @@
board_time_init = mips_time_init;
board_timer_setup = mips_timer_setup;
rtc_get_time = mips_rtc_get_time;
-
- return 0;
}
-early_initcall(atlas_setup);
-
static void __init serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 311155d..eab5a70 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -22,18 +24,19 @@
#include <linux/string.h>
#include <linux/kernel.h>
-#include <asm/io.h>
#include <asm/bootinfo.h>
+#include <asm/gt64120.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
-#ifdef CONFIG_MIPS_GT64120
-#include <asm/gt64120.h>
-#endif
-#include <asm/mips-boards/msc01_pci.h>
#include <asm/mips-boards/bonito64.h>
-#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/msc01_pci.h>
+
#include <asm/mips-boards/malta.h>
-#endif
#ifdef CONFIG_KGDB
extern int rs_kgdb_hook(int, int);
@@ -223,8 +226,34 @@
}
#endif
+void __init mips_nmi_setup (void)
+{
+ void *base;
+ extern char except_vec_nmi;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa80) :
+ (void *)(CAC_BASE + 0x380);
+ memcpy(base, &except_vec_nmi, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void __init mips_ejtag_setup (void)
+{
+ void *base;
+ extern char except_vec_ejtag_debug;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa00) :
+ (void *)(CAC_BASE + 0x300);
+ memcpy(base, &except_vec_ejtag_debug, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
void __init prom_init(void)
{
+ u32 start, map, mask, data;
+
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
@@ -266,12 +295,15 @@
#else
GT_WRITE(GT_PCI0_CMD_OFS, 0);
#endif
+ /* Fix up PCI I/O mapping if necessary (for Atlas). */
+ start = GT_READ(GT_PCI0IOLD_OFS);
+ map = GT_READ(GT_PCI0IOREMAP_OFS);
+ if ((start & map) != 0) {
+ map &= ~start;
+ GT_WRITE(GT_PCI0IOREMAP_OFS, map);
+ }
-#ifdef CONFIG_MIPS_MALTA
set_io_port_base(MALTA_GT_PORT_BASE);
-#else
- set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
break;
case MIPS_REVISION_CORID_CORE_EMUL_BON:
@@ -300,18 +332,21 @@
BONITO_BONGENCFG_BYTESWAP;
#endif
-#ifdef CONFIG_MIPS_MALTA
set_io_port_base(MALTA_BONITO_PORT_BASE);
-#else
- set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
break;
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
+ mb();
+ MSC_READ(MSC01_PCI_CFG, data);
+ MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
+ wmb();
+
+ /* Fix up lane swapping. */
#ifdef CONFIG_CPU_LITTLE_ENDIAN
MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
#else
@@ -320,12 +355,23 @@
MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
#endif
+ /* Fix up target memory mapping. */
+ MSC_READ(MSC01_PCI_BAR0, mask);
+ MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
-#ifdef CONFIG_MIPS_MALTA
+ /* Don't handle target retries indefinitely. */
+ if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
+ MSC01_PCI_CFG_MAXRTRY_MSK)
+ data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
+ MSC01_PCI_CFG_MAXRTRY_SHF)) |
+ ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
+ MSC01_PCI_CFG_MAXRTRY_SHF);
+
+ wmb();
+ MSC_WRITE(MSC01_PCI_CFG, data);
+ mb();
+
set_io_port_base(MALTA_MSC_PORT_BASE);
-#else
- set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
break;
default:
@@ -334,6 +380,9 @@
while(1); /* We die here... */
}
#endif
+ board_nmi_handler_setup = mips_nmi_setup;
+ board_ejtag_handler_setup = mips_ejtag_setup;
+
prom_printf("\nLINUX started...\n");
prom_init_cmdline();
prom_meminit();
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 5ae2b43..2c8afd7 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
+#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@@ -55,18 +56,30 @@
{
char *memsize_str;
unsigned int memsize;
+ char cmdline[CL_SIZE], *ptr;
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
- memsize = 0x02000000;
- } else {
-#ifdef DEBUG
- prom_printf("prom_memsize = %s\n", memsize_str);
-#endif
- memsize = simple_strtol(memsize_str, NULL, 0);
+ /* Check the command line first for a memsize directive */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr) {
+ memsize = memparse(ptr + 8, &ptr);
}
-
+ else {
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+ memsize = 0x02000000;
+ } else {
+#ifdef DEBUG
+ prom_printf("prom_memsize = %s\n", memsize_str);
+#endif
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+ }
memset(mdesc, 0, sizeof(mdesc));
mdesc[0].type = yamon_dontuse;
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 131f49b..a397ecb 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -29,6 +29,20 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#define CASCADE_IRQ MIPSCPU_INT_ATLAS
+#define CASCADE_DISPATCH atlas_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/maltaint.h>
+#define CASCADE_IRQ MIPSCPU_INT_I8259A
+#define CASCADE_DISPATCH malta_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
+
/* A lot of complication here is taken away because:
*
* 1) We handle one interrupt and return, sitting in a loop and moving across
@@ -80,74 +94,62 @@
mfc0 s0, CP0_CAUSE # get irq bits
mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
and s0, s1
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
-
- /* Wheee, a timer interrupt. */
- move a0, sp
- jal mips_timer_interrupt
- nop
-
- j ret_from_irq
- nop
-
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
#else
- beq a0, zero, 1f # delay slot, check hw3 interrupt
- andi a0, s0, CAUSEF_IP5
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
#endif
- /* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
- jal atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
- jal malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
- jal sead_hw0_irqdispatch
+#ifdef CASCADE_IRQ
+ li a1, CASCADE_IRQ
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
+
+ jal CASCADE_DISPATCH
+ move a0, sp
+
+ j ret_from_irq
+ nop
+1:
#else
-#error "MIPS board not supported\n"
+ addu a0, MIPSCPU_INT_BASE
#endif
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
+ jal do_IRQ
+ move a1, sp
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
- jal sead_hw1_irqdispatch
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
- beq a0, zero, 1f # check hw3 (coreHI) interrupt
- nop
- jal corehi_irqdispatch
- move a0, sp
j ret_from_irq
nop
-1:
-#endif
- /*
- * Here by mistake? This is possible, what can happen is that by the
- * time we take the exception the IRQ pin goes low, so just leave if
- * this is the case.
- */
- move a1,s0
- PRINT("Got interrupt: c0_cause = %08x\n")
- mfc0 a1, CP0_EPC
- PRINT("c0_epc = %08x\n")
- j ret_from_irq
+
+spurious:
+ j spurious_interrupt
nop
END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 92c34bd..1f6f9df 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
@@ -19,65 +21,46 @@
*
* MIPS boards specific PCI support.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/mips-boards/generic.h>
#include <asm/gt64120.h>
+
+#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/bonito64.h>
#include <asm/mips-boards/msc01_pci.h>
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/malta.h>
-#endif
static struct resource bonito64_mem_resource = {
.name = "Bonito PCI MEM",
- .start = 0x10000000UL,
- .end = 0x1bffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource bonito64_io_resource = {
- .name = "Bonito IO MEM",
- .start = 0x00002000UL, /* avoid conflicts with YAMON allocated I/O addresses */
+ .name = "Bonito PCI I/O",
+ .start = 0x00000000UL,
.end = 0x000fffffUL,
.flags = IORESOURCE_IO,
};
static struct resource gt64120_mem_resource = {
- .name = "GT64120 PCI MEM",
- .start = 0x10000000UL,
- .end = 0x1bdfffffUL,
+ .name = "GT-64120 PCI MEM",
.flags = IORESOURCE_MEM,
};
static struct resource gt64120_io_resource = {
- .name = "GT64120 IO MEM",
-#ifdef CONFIG_MIPS_ATLAS
- .start = 0x18000000UL,
- .end = 0x181fffffUL,
-#endif
-#ifdef CONFIG_MIPS_MALTA
- .start = 0x00002000UL,
- .end = 0x001fffffUL,
-#endif
+ .name = "GT-64120 PCI I/O",
.flags = IORESOURCE_IO,
};
static struct resource msc_mem_resource = {
.name = "MSC PCI MEM",
- .start = 0x10000000UL,
- .end = 0x1fffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource msc_io_resource = {
- .name = "MSC IO MEM",
- .start = 0x00002000UL,
- .end = 0x007fffffUL,
+ .name = "MSC PCI I/O",
.flags = IORESOURCE_IO,
};
@@ -89,7 +72,6 @@
.pci_ops = &bonito64_pci_ops,
.io_resource = &bonito64_io_resource,
.mem_resource = &bonito64_mem_resource,
- .mem_offset = 0x10000000UL,
.io_offset = 0x00000000UL,
};
@@ -97,21 +79,18 @@
.pci_ops = >64120_pci_ops,
.io_resource = >64120_io_resource,
.mem_resource = >64120_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_offset = 0x00000000UL,
};
-static struct pci_controller msc_controller = {
+static struct pci_controller msc_controller = {
.pci_ops = &msc_pci_ops,
.io_resource = &msc_io_resource,
.mem_resource = &msc_mem_resource,
- .mem_offset = 0x10000000UL,
- .io_offset = 0x00000000UL,
};
-static int __init pcibios_init(void)
+void __init mips_pcibios_init(void)
{
struct pci_controller *controller;
+ unsigned long start, end, map, start1, end1, map1, map2, map3, mask;
switch (mips_revision_corid) {
case MIPS_REVISION_CORID_QED_RM5261:
@@ -130,34 +109,140 @@
(0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */
(0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/
((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/
- GT_PCI0_CFGADDR_CONFIGEN_BIT );
+ GT_PCI0_CFGADDR_CONFIGEN_BIT);
/* Perform the write */
GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE));
+ /* Set up resource ranges from the controller's registers. */
+ start = GT_READ(GT_PCI0M0LD_OFS);
+ end = GT_READ(GT_PCI0M0HD_OFS);
+ map = GT_READ(GT_PCI0M0REMAP_OFS);
+ end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+ start1 = GT_READ(GT_PCI0M1LD_OFS);
+ end1 = GT_READ(GT_PCI0M1HD_OFS);
+ map1 = GT_READ(GT_PCI0M1REMAP_OFS);
+ end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK);
+ /* Cannot support multiple windows, use the wider. */
+ if (end1 - start1 > end - start) {
+ start = start1;
+ end = end1;
+ map = map1;
+ }
+ mask = ~(start ^ end);
+ /* We don't support remapping with a discontiguous mask. */
+ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+ mask != ~((mask & -mask) - 1));
+ gt64120_mem_resource.start = start;
+ gt64120_mem_resource.end = end;
+ gt64120_controller.mem_offset = (start & mask) - (map & mask);
+ /* Addresses are 36-bit, so do shifts in the destinations. */
+ gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF;
+ gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF;
+ gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+ gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF;
+
+ start = GT_READ(GT_PCI0IOLD_OFS);
+ end = GT_READ(GT_PCI0IOHD_OFS);
+ map = GT_READ(GT_PCI0IOREMAP_OFS);
+ end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+ mask = ~(start ^ end);
+ /* We don't support remapping with a discontiguous mask. */
+ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+ mask != ~((mask & -mask) - 1));
+ gt64120_io_resource.start = map & mask;
+ gt64120_io_resource.end = (map & mask) | ~mask;
+ gt64120_controller.io_offset = 0;
+ /* Addresses are 36-bit, so do shifts in the destinations. */
+ gt64120_io_resource.start <<= GT_PCI_DCRM_SHF;
+ gt64120_io_resource.end <<= GT_PCI_DCRM_SHF;
+ gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+
controller = >64120_controller;
break;
case MIPS_REVISION_CORID_BONITO64:
case MIPS_REVISION_CORID_CORE_20K:
case MIPS_REVISION_CORID_CORE_EMUL_BON:
+ /* Set up resource ranges from the controller's registers. */
+ map = BONITO_PCIMAP;
+ map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >>
+ BONITO_PCIMAP_PCIMAP_LO0_SHIFT;
+ map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >>
+ BONITO_PCIMAP_PCIMAP_LO1_SHIFT;
+ map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >>
+ BONITO_PCIMAP_PCIMAP_LO2_SHIFT;
+ /* Combine as many adjacent windows as possible. */
+ map = map1;
+ start = BONITO_PCILO0_BASE;
+ end = 1;
+ if (map3 == map2 + 1) {
+ map = map2;
+ start = BONITO_PCILO1_BASE;
+ end++;
+ }
+ if (map2 == map1 + 1) {
+ map = map1;
+ start = BONITO_PCILO0_BASE;
+ end++;
+ }
+ bonito64_mem_resource.start = start;
+ bonito64_mem_resource.end = start +
+ BONITO_PCIMAP_WINBASE(end) - 1;
+ bonito64_controller.mem_offset = start -
+ BONITO_PCIMAP_WINBASE(map);
+
controller = &bonito64_controller;
break;
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ /* Set up resource ranges from the controller's registers. */
+ MSC_READ(MSC01_PCI_SC2PMBASL, start);
+ MSC_READ(MSC01_PCI_SC2PMMSKL, mask);
+ MSC_READ(MSC01_PCI_SC2PMMAPL, map);
+ msc_mem_resource.start = start & mask;
+ msc_mem_resource.end = (start & mask) | ~mask;
+ msc_controller.mem_offset = (start & mask) - (map & mask);
+
+ MSC_READ(MSC01_PCI_SC2PIOBASL, start);
+ MSC_READ(MSC01_PCI_SC2PIOMSKL, mask);
+ MSC_READ(MSC01_PCI_SC2PIOMAPL, map);
+ msc_io_resource.start = map & mask;
+ msc_io_resource.end = (map & mask) | ~mask;
+ msc_controller.io_offset = 0;
+ ioport_resource.end = ~mask;
+
+ /* If ranges overlap I/O takes precedence. */
+ start = start & mask;
+ end = start | ~mask;
+ if ((start >= msc_mem_resource.start &&
+ start <= msc_mem_resource.end) ||
+ (end >= msc_mem_resource.start &&
+ end <= msc_mem_resource.end)) {
+ /* Use the larger space. */
+ start = max(start, msc_mem_resource.start);
+ end = min(end, msc_mem_resource.end);
+ if (start - msc_mem_resource.start >=
+ msc_mem_resource.end - end)
+ msc_mem_resource.end = start - 1;
+ else
+ msc_mem_resource.start = end + 1;
+ }
+
controller = &msc_controller;
break;
default:
- return 1;
+ return;
}
+ if (controller->io_resource->start < 0x00001000UL) /* FIXME */
+ controller->io_resource->start = 0x00001000UL;
+
+ iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
register_pci_controller (controller);
-
- return 0;
}
-
-early_initcall(pcibios_init);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 1631544..72a12d9 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -31,22 +31,21 @@
#include <asm/mipsregs.h>
#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/cpu.h>
#include <asm/time.h>
#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/mc146818-time.h>
unsigned long cpu_khz;
-#if defined(CONFIG_MIPS_SEAD)
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5)
-#else
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-#endif
-
#if defined(CONFIG_MIPS_ATLAS)
static char display_string[] = " LINUX ON ATLAS ";
#endif
@@ -59,20 +58,61 @@
static unsigned int display_count = 0;
#define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
-#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1)
-
static unsigned int timer_tick_count=0;
+static int mips_cpu_timer_irq;
-void mips_timer_interrupt(struct pt_regs *regs)
+static inline void scroll_display_message(void)
{
if ((timer_tick_count++ % HZ) == 0) {
mips_display_message(&display_string[display_count++]);
if (display_count == MAX_DISPLAY_COUNT)
- display_count = 0;
+ display_count = 0;
+ }
+}
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+ do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+
+ if (cpu == 0) {
+ /*
+ * CPU 0 handles the global timer interrupt job and process accounting
+ * resets count/compare registers to trigger next timer int.
+ */
+ (void) timer_interrupt(irq, dev_id, regs);
+ scroll_display_message();
+ }
+ else {
+ /* Everyone else needs to reset the timer int here as
+ ll_local_timer_interrupt doesn't */
+ /*
+ * FIXME: need to cope with counter underflow.
+ * More support needs to be added to kernel/time for
+ * counter/timer interrupts on multiple CPU's
+ */
+ write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ));
+ /*
+ * other CPUs should do profiling and process accounting
+ */
+ local_timer_interrupt (irq, dev_id, regs);
}
- ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
+ return IRQ_HANDLED;
+#else
+ irqreturn_t r;
+
+ r = timer_interrupt(irq, dev_id, regs);
+
+ scroll_display_message();
+
+ return r;
+#endif
}
/*
@@ -140,10 +180,8 @@
local_irq_save(flags);
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
/* Set Data mode - binary. */
CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-#endif
est_freq = estimate_cpu_frequency ();
@@ -157,11 +195,29 @@
void __init mips_timer_setup(struct irqaction *irq)
{
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ }
+ else {
+ if (cpu_has_vint)
+ set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+ }
+
+
/* we are using the cpu counter for timer interrupts */
- irq->handler = no_action; /* we use our own handler */
- setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+ irq->handler = mips_timer_interrupt; /* we use our own handler */
+ setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+ /* irq_desc(riptor) is a global resource, when the interrupt overlaps
+ on seperate cpu's the first one tries to handle the second interrupt.
+ The effect is that the int remains disabled on the second cpu.
+ Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+ irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
/* to generate the first timer interrupt */
write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
- set_c0_status(ALLINTS);
}
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index dd2db35..d06dc5ad 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -30,6 +30,7 @@
#include <linux/random.h>
#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
#include <asm/io.h>
#include <asm/mips-boards/malta.h>
#include <asm/mips-boards/maltaint.h>
@@ -37,8 +38,10 @@
#include <asm/gt64120.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/msc01_pci.h>
+#include <asm/msc01_ic.h>
extern asmlinkage void mipsIRQ(void);
+extern void mips_timer_interrupt(void);
static DEFINE_SPINLOCK(mips_irq_lock);
@@ -54,6 +57,7 @@
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
MSC_READ(MSC01_PCI_IACK, irq);
irq &= 0xff;
@@ -91,88 +95,86 @@
return irq;
}
-static inline int get_int(int *irq)
+static inline int get_int(void)
{
unsigned long flags;
-
+ int irq;
spin_lock_irqsave(&mips_irq_lock, flags);
- *irq = mips_pcibios_iack();
+ irq = mips_pcibios_iack();
/*
- * IRQ7 is used to detect spurious interrupts.
- * The interrupt acknowledge cycle returns IRQ7, if no
- * interrupts is requested.
- * We can differentiate between this situation and a
- * "Normal" IRQ7 by reading the ISR.
+ * The only way we can decide if an interrupt is spurious
+ * is by checking the 8259 registers. This needs a spinlock
+ * on an SMP system, so leave it up to the generic code...
*/
- if (*irq == 7)
- {
- outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR,
- PIIX4_ICTLR1_OCW3);
- if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) {
- spin_unlock_irqrestore(&mips_irq_lock, flags);
- printk("We got a spurious interrupt from PIIX4.\n");
- atomic_inc(&irq_err_count);
- return -1; /* Spurious interrupt. */
- }
- }
spin_unlock_irqrestore(&mips_irq_lock, flags);
- return 0;
+ return irq;
}
void malta_hw0_irqdispatch(struct pt_regs *regs)
{
int irq;
- if (get_int(&irq))
- return; /* interrupt has already been cleared */
+ irq = get_int();
+ if (irq < 0)
+ return; /* interrupt has already been cleared */
- do_IRQ(irq, regs);
+ do_IRQ(MALTA_INT_BASE+irq, regs);
}
void corehi_irqdispatch(struct pt_regs *regs)
{
- unsigned int data,datahi;
-
- /* Mask out corehi interrupt. */
- clear_c0_status(IE_IRQ3);
+ unsigned int intrcause,datalo,datahi;
+ unsigned int pcimstat, intisr, inten, intpol, intedge, intsteer, pcicmd, pcibadaddr;
printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
, regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
+
+ /* Read all the registers and then print them as there is a
+ problem with interspersed printk's upsetting the Bonito controller.
+ Do it for the others too.
+ */
+
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
- case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ ll_msc_irq(regs);
break;
case MIPS_REVISION_CORID_QED_RM5261:
case MIPS_REVISION_CORID_CORE_LV:
case MIPS_REVISION_CORID_CORE_FPGA:
case MIPS_REVISION_CORID_CORE_FPGAR2:
- data = GT_READ(GT_INTRCAUSE_OFS);
- printk("GT_INTRCAUSE = %08x\n", data);
- data = GT_READ(GT_CPUERR_ADDRLO_OFS);
+ intrcause = GT_READ(GT_INTRCAUSE_OFS);
+ datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
- printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data);
+ printk("GT_INTRCAUSE = %08x\n", intrcause);
+ printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo);
break;
case MIPS_REVISION_CORID_BONITO64:
case MIPS_REVISION_CORID_CORE_20K:
case MIPS_REVISION_CORID_CORE_EMUL_BON:
- data = BONITO_INTISR;
- printk("BONITO_INTISR = %08x\n", data);
- data = BONITO_INTEN;
- printk("BONITO_INTEN = %08x\n", data);
- data = BONITO_INTPOL;
- printk("BONITO_INTPOL = %08x\n", data);
- data = BONITO_INTEDGE;
- printk("BONITO_INTEDGE = %08x\n", data);
- data = BONITO_INTSTEER;
- printk("BONITO_INTSTEER = %08x\n", data);
- data = BONITO_PCICMD;
- printk("BONITO_PCICMD = %08x\n", data);
+ pcibadaddr = BONITO_PCIBADADDR;
+ pcimstat = BONITO_PCIMSTAT;
+ intisr = BONITO_INTISR;
+ inten = BONITO_INTEN;
+ intpol = BONITO_INTPOL;
+ intedge = BONITO_INTEDGE;
+ intsteer = BONITO_INTSTEER;
+ pcicmd = BONITO_PCICMD;
+ printk("BONITO_INTISR = %08x\n", intisr);
+ printk("BONITO_INTEN = %08x\n", inten);
+ printk("BONITO_INTPOL = %08x\n", intpol);
+ printk("BONITO_INTEDGE = %08x\n", intedge);
+ printk("BONITO_INTSTEER = %08x\n", intsteer);
+ printk("BONITO_PCICMD = %08x\n", pcicmd);
+ printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+ printk("BONITO_PCIMSTAT = %08x\n", pcimstat);
break;
}
@@ -180,8 +182,71 @@
die("CoreHi interrupt", regs);
}
+static struct irqaction i8259irq = {
+ .handler = no_action,
+ .name = "XT-PIC cascade"
+};
+
+static struct irqaction corehi_irqaction = {
+ .handler = no_action,
+ .name = "CoreHi"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+ {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+ {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
+
void __init arch_init_irq(void)
{
set_except_vector(0, mipsIRQ);
init_i8259_irqs();
+
+ if (!cpu_has_veic)
+ mips_cpu_irq_init (MIPSCPU_INT_BASE);
+
+ switch(mips_revision_corid) {
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ if (cpu_has_veic)
+ init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+ else
+ init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+ }
+
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
+ set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
+ setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
+ setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
+ }
+ else if (cpu_has_vint) {
+ set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
+ set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
+
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+ }
+ else {
+ set_except_vector(0, mipsIRQ);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+ }
}
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index df6db64..2209e8a 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -111,10 +111,12 @@
}
#endif
-static int __init malta_setup(void)
+void __init plat_setup(void)
{
unsigned int i;
+ mips_pcibios_init();
+
/* Request I/O space for devices used on the Malta board. */
for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
request_resource(&ioport_resource, standard_io_resources+i);
@@ -224,8 +226,4 @@
board_time_init = mips_time_init;
board_timer_setup = mips_timer_setup;
rtc_get_time = mips_rtc_get_time;
-
- return 0;
}
-
-early_initcall(malta_setup);
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index e510965..e1dd7e0 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -2,6 +2,7 @@
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004 Maciej W. Rozycki
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -21,7 +22,9 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
-#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/system.h>
#include <asm/mips-boards/seadint.h>
@@ -39,13 +42,8 @@
void __init arch_init_irq(void)
{
- /*
- * Mask out all interrupt
- */
- clear_c0_status(0x0000ff00);
+ mips_cpu_irq_init(0);
/* Now safe to set the exception vector. */
set_except_vector(0, mipsIRQ);
-
- mips_cpu_irq_init(0);
}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index 29892b8..de90bec 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -57,8 +57,6 @@
mips_reboot_setup();
}
-early_initcall(sead_setup);
-
static void __init serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mips-boards/sim/Makefile
new file mode 100644
index 0000000..5b977de
--- /dev/null
+++ b/arch/mips/mips-boards/sim/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+
+obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \
+ sim_cmdline.o
+obj-$(CONFIG_SMP) += sim_smp.o
diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c
new file mode 100644
index 0000000..fef9fbd
--- /dev/null
+++ b/arch/mips/mips-boards/sim/cmdline.c
@@ -0,0 +1,59 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern int *_prom_argv;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
+
+char arcs_cmdline[CL_SIZE];
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+
+void __init prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while(actr < prom_argc) {
+ strcpy(cp, prom_argv(actr));
+ cp += strlen(prom_argv(actr));
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+}
diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c
new file mode 100644
index 0000000..9987a85
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_IRQ.c
@@ -0,0 +1,148 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ * common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ * would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ * between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware (ignored)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ * wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ and s0, s1
+
+ /* First we check for r4k counter/timer IRQ. */
+ andi a0, s0, CAUSEF_IP7
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
+
+ /* Wheee, a timer interrupt. */
+ move a0, sp
+ jal mips_timer_interrupt
+ nop
+
+ j ret_from_irq
+ nop
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
+#else
+ beq a0, zero, 1f # delay slot, check hw3 interrupt
+ andi a0, s0, CAUSEF_IP5
+#endif
+
+ /* Wheee, combined hardware level zero interrupt. */
+#if defined(CONFIG_MIPS_ATLAS)
+ jal atlas_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_MALTA)
+ jal malta_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_SEAD)
+ jal sead_hw0_irqdispatch
+#else
+#error "MIPS board not supported\n"
+#endif
+ move a0, sp # delay slot
+
+ j ret_from_irq
+ nop # delay slot
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
+ jal sead_hw1_irqdispatch
+ move a0, sp # delay slot
+ j ret_from_irq
+ nop # delay slot
+1:
+#endif
+#if defined(CONFIG_MIPS_MALTA)
+ beq a0, zero, 1f # check hw3 (coreHI) interrupt
+ nop
+ jal corehi_irqdispatch
+ move a0, sp
+ j ret_from_irq
+ nop
+1:
+#endif
+ /*
+ * Here by mistake? This is possible, what can happen is that by the
+ * time we take the exception the IRQ pin goes low, so just leave if
+ * this is the case.
+ */
+ move a1,s0
+ PRINT("Got interrupt: c0_cause = %08x\n")
+ mfc0 a1, CP0_EPC
+ PRINT("c0_epc = %08x\n")
+
+ j ret_from_irq
+ nop
+ END(mipsIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c
new file mode 100644
index 0000000..9df37c6
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_cmdline.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/bootinfo.h>
+
+extern char arcs_cmdline[];
+
+char * __init prom_getcmdline(void)
+{
+ return arcs_cmdline;
+}
+
+
+void __init prom_init_cmdline(void)
+{
+ /* nothing to do */
+}
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c
new file mode 100644
index 0000000..a4d0a2c
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_int.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void mips_cpu_irq_init(int);
+
+extern asmlinkage void simIRQ(void);
+
+asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs)
+{
+ do_IRQ(2, regs);
+}
+
+void __init arch_init_irq(void)
+{
+ /* Now safe to set the exception vector. */
+ set_except_vector(0, simIRQ);
+
+ mips_cpu_irq_init(MIPSCPU_INT_BASE);
+}
diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S
new file mode 100644
index 0000000..835f038
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_irq.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#include <asm/mips-boards/simint.h>
+
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(simIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
+ and s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
+#endif
+
+#ifdef CASCADE_IRQ
+ li a1, CASCADE_IRQ
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
+
+ jal CASCADE_DISPATCH
+ move a0, sp
+
+ j ret_from_irq
+ nop
+1:
+#else
+ addu a0, MIPSCPU_INT_BASE
+#endif
+
+ jal do_IRQ
+ move a1, sp
+
+ j ret_from_irq
+ nop
+
+
+spurious:
+ j spurious_interrupt
+ nop
+ END(simIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c
new file mode 100644
index 0000000..0dbd743
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_mem.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+
+#include <asm/mips-boards/prom.h>
+
+/*#define DEBUG*/
+
+enum simmem_memtypes {
+ simmem_reserved = 0,
+ simmem_free,
+};
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+#ifdef DEBUG
+static char *mtypes[3] = {
+ "SIM reserved memory",
+ "SIM free memory",
+};
+#endif
+
+/* References to section boundaries */
+extern char _end;
+
+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+ unsigned int memsize;
+
+ memsize = 0x02000000;
+ prom_printf("Setting default memory size 0x%08x\n", memsize);
+
+ memset(mdesc, 0, sizeof(mdesc));
+
+ mdesc[0].type = simmem_reserved;
+ mdesc[0].base = 0x00000000;
+ mdesc[0].size = 0x00001000;
+
+ mdesc[1].type = simmem_free;
+ mdesc[1].base = 0x00001000;
+ mdesc[1].size = 0x000ff000;
+
+ mdesc[2].type = simmem_reserved;
+ mdesc[2].base = 0x00100000;
+ mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base;
+
+ mdesc[3].type = simmem_free;
+ mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end));
+ mdesc[3].size = memsize - mdesc[3].base;
+
+ return &mdesc[0];
+}
+
+static int __init prom_memtype_classify (unsigned int type)
+{
+ switch (type) {
+ case simmem_free:
+ return BOOT_MEM_RAM;
+ case simmem_reserved:
+ default:
+ return BOOT_MEM_RESERVED;
+ }
+}
+
+void __init prom_meminit(void)
+{
+ struct prom_pmemblock *p;
+
+ p = prom_getmdesc();
+
+ while (p->size) {
+ long type;
+ unsigned long base, size;
+
+ type = prom_memtype_classify (p->type);
+ base = p->base;
+ size = p->size;
+
+ add_memory_region(base, size, type);
+ p++;
+ }
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ int i;
+ unsigned long freed = 0;
+ unsigned long addr;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+ continue;
+
+ addr = boot_mem_map.map[i].addr;
+ while (addr < boot_mem_map.map[i].addr
+ + boot_mem_map.map[i].size) {
+ ClearPageReserved(virt_to_page(__va(addr)));
+ set_page_count(virt_to_page(__va(addr)), 1);
+ free_page((unsigned long)__va(addr));
+ addr += PAGE_SIZE;
+ freed += PAGE_SIZE;
+ }
+ }
+ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
+
+ return freed;
+}
diff --git a/arch/mips/mips-boards/sim/sim_printf.c b/arch/mips/mips-boards/sim/sim_printf.c
new file mode 100644
index 0000000..3ee5a0b
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_printf.c
@@ -0,0 +1,74 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+static inline unsigned int serial_in(int offset)
+{
+ return inb(0x3f8 + offset);
+}
+
+static inline void serial_out(int offset, int value)
+{
+ outb(value, 0x3f8 + offset);
+}
+
+int putPromChar(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+ ;
+
+ serial_out(UART_TX, c);
+
+ return 1;
+}
+
+char getPromChar(void)
+{
+ while (!(serial_in(UART_LSR) & 1))
+ ;
+
+ return serial_in(UART_RX);
+}
+
+void prom_printf(char *fmt, ...)
+{
+ va_list args;
+ int l;
+ char *p, *buf_end;
+ char buf[1024];
+
+ va_start(args, fmt);
+ l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+ va_end(args);
+
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++) {
+ /* Crude cr/nl handling is better than none */
+ if (*p == '\n')
+ putPromChar('\r');
+ putPromChar(*p);
+ }
+}
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
new file mode 100644
index 0000000..485d5a5
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mips-boards/sim.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void sim_time_init(void);
+extern void sim_timer_setup(struct irqaction *irq);
+static void __init serial_init(void);
+unsigned int _isbonito = 0;
+
+extern void __init sanitize_tlb_entries(void);
+
+
+const char *get_system_type(void)
+{
+ return "MIPSsim";
+}
+
+void __init plat_setup(void)
+{
+ set_io_port_base(0xbfd00000);
+
+ serial_init();
+
+ board_time_init = sim_time_init;
+ board_timer_setup = sim_timer_setup;
+ prom_printf("Linux started...\n");
+
+#ifdef CONFIG_MT_SMP
+ sanitize_tlb_entries();
+#endif
+}
+
+void prom_init(void)
+{
+ set_io_port_base(0xbfd00000);
+
+ prom_printf("\nLINUX started...\n");
+ prom_init_cmdline();
+ prom_meminit();
+}
+
+
+static void __init serial_init(void)
+{
+#ifdef CONFIG_SERIAL_8250
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.iobase = 0x3f8;
+
+ /* hardware int 4 - the serial int, is CPU int 6
+ but poll for now */
+ s.irq = 0;
+ s.uartclk = BASE_BAUD * 16;
+ s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+ s.regshift = 0;
+ s.timeout = 4;
+
+ if (early_serial_setup(&s) != 0) {
+ prom_printf(KERN_ERR "Serial setup failed!\n");
+ }
+
+#endif
+}
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
new file mode 100644
index 0000000..1982435
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+/*
+ * Simulator Platform-specific hooks for SMP operation
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_send_ipi(int, int, unsigned int);
+
+ smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern int mipsmt_build_cpu_map(int startslot);
+ int nextslot;
+
+ cpus_clear(phys_cpu_present_map);
+
+ /* Register the boot CPU */
+
+ smp_prepare_boot_cpu();
+
+ /*
+ * As of November, 2004, MIPSsim only simulates one core
+ * at a time. However, that core may be a MIPS MT core
+ * with multiple virtual processors and thread contexts.
+ */
+
+ if (read_c0_config3() & (1<<2)) {
+ nextslot = mipsmt_build_cpu_map(1);
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+
+ smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_init_secondary(void);
+
+ smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ */
+
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void mipsmt_prepare_cpus(int c);
+ /*
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+ if (read_c0_config3() & (1<<2)) {
+ mipsmt_prepare_cpus(max_cpus);
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_smp_finish(void);
+
+ smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
new file mode 100644
index 0000000..18b968c
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -0,0 +1,215 @@
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/timex.h>
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/simint.h>
+#include <asm/mc146818-time.h>
+#include <asm/smp.h>
+
+
+unsigned long cpu_khz;
+
+extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
+
+irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+
+ /*
+ * CPU 0 handles the global timer interrupt job
+ * resets count/compare registers to trigger next timer int.
+ */
+#ifndef CONFIG_MIPS_MT_SMTC
+ if (cpu == 0) {
+ timer_interrupt(irq, dev_id, regs);
+ }
+ else {
+ /* Everyone else needs to reset the timer int here as
+ ll_local_timer_interrupt doesn't */
+ /*
+ * FIXME: need to cope with counter underflow.
+ * More support needs to be added to kernel/time for
+ * counter/timer interrupts on multiple CPU's
+ */
+ write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+ }
+#else /* SMTC */
+ /*
+ * In SMTC system, one Count/Compare set exists per VPE.
+ * Which TC within a VPE gets the interrupt is essentially
+ * random - we only know that it shouldn't be one with
+ * IXMT set. Whichever TC gets the interrupt needs to
+ * send special interprocessor interrupts to the other
+ * TCs to make sure that they schedule, etc.
+ *
+ * That code is specific to the SMTC kernel, not to
+ * the simulation platform, so it's invoked from
+ * the general MIPS timer_interrupt routine.
+ *
+ * We have a problem in that the interrupt vector code
+ * had to turn off the timer IM bit to avoid redundant
+ * entries, but we may never get to mips_cpu_irq_end
+ * to turn it back on again if the scheduler gets
+ * involved. So we clear the pending timer here,
+ * and re-enable the mask...
+ */
+
+ int vpflags = dvpe();
+ write_c0_compare (read_c0_count() - 1);
+ clear_c0_cause(0x100 << MIPSCPU_INT_CPUCTR);
+ set_c0_status(0x100 << MIPSCPU_INT_CPUCTR);
+ irq_enable_hazard();
+ evpe(vpflags);
+
+ if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id, regs);
+ else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+ smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+ /*
+ * every CPU should do profiling and process accounting
+ */
+ local_timer_interrupt (irq, dev_id, regs);
+ return IRQ_HANDLED;
+#else
+ return timer_interrupt (irq, dev_id, regs);
+#endif
+}
+
+
+
+/*
+ * Estimate CPU frequency. Sets mips_counter_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+ unsigned int prid = read_c0_prid() & 0xffff00;
+ unsigned int count;
+
+#if 1
+ /*
+ * hardwire the board frequency to 12MHz.
+ */
+
+ if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
+ (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
+ count = 12000000;
+ else
+ count = 6000000;
+#else
+ unsigned int flags;
+
+ local_irq_save(flags);
+
+ /* Start counter exactly on falling edge of update flag */
+ while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+ while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+ /* Start r4k counter. */
+ write_c0_count(0);
+
+ /* Read counter exactly on falling edge of update flag */
+ while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+ while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+ count = read_c0_count();
+
+ /* restore interrupts */
+ local_irq_restore(flags);
+#endif
+
+ mips_hpt_frequency = count;
+
+ if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+ (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+ count *= 2;
+
+ count += 5000; /* round */
+ count -= count%10000;
+
+ return count;
+}
+
+void __init sim_time_init(void)
+{
+ unsigned int est_freq, flags;
+
+ local_irq_save(flags);
+
+
+ /* Set Data mode - binary. */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+
+ est_freq = estimate_cpu_frequency ();
+
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ (est_freq%1000000)*100/1000000);
+
+ cpu_khz = est_freq / 1000;
+
+ local_irq_restore(flags);
+}
+
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+ do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+
+void __init sim_timer_setup(struct irqaction *irq)
+{
+ if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ }
+ else {
+ if (cpu_has_vint)
+ set_vi_handler(MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+ }
+
+ /* we are using the cpu counter for timer interrupts */
+ irq->handler = sim_timer_interrupt;
+ setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+ /* irq_desc(riptor) is a global resource, when the interrupt overlaps
+ on seperate cpu's the first one tries to handle the second interrupt.
+ The effect is that the int remains disabled on the second cpu.
+ Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+ irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
+
+ /* to generate the first timer interrupt */
+ write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b56a0ab..b0178da 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -22,7 +22,7 @@
obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_SB1) += c-sb1.o cerr-sb1.o cex-sb1.o pg-sb1.o \
- tlb-sb1.o
+ tlb-r4k.o
obj-$(CONFIG_CPU_TX39XX) += c-tx39.o pg-r4k.o tlb-r3k.o
obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index c659f99..27f4fa2 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -221,12 +221,14 @@
struct mm_struct *mm)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
unsigned long physpage;
pgd = pgd_offset(mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
if ((physpage = pte_val(*pte)) & _PAGE_VALID)
@@ -317,7 +319,7 @@
r3k_flush_dcache_range(start, start + size);
}
-void __init ld_mmu_r23000(void)
+void __init r3k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5ea84bc..38223b4 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -16,6 +16,7 @@
#include <asm/bcache.h>
#include <asm/bootinfo.h>
+#include <asm/cache.h>
#include <asm/cacheops.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -26,8 +27,14 @@
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/war.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
-static unsigned long icache_size, dcache_size, scache_size;
+/*
+ * Must die.
+ */
+static unsigned long icache_size __read_mostly;
+static unsigned long dcache_size __read_mostly;
+static unsigned long scache_size __read_mostly;
/*
* Dummy cache handling routines for machines without boardcaches
@@ -43,8 +50,8 @@
struct bcache_ops *bcops = &no_sc_ops;
-#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x2010)
-#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x2020)
+#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
#define R4600_HIT_CACHEOP_WAR_IMPL \
do { \
@@ -190,12 +197,12 @@
if (ic_lsize == 16)
r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
else if (ic_lsize == 32) {
- if (TX49XX_ICACHE_INDEX_INV_WAR)
- r4k_blast_icache_page_indexed =
- tx49_blast_icache32_page_indexed;
- else if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
+ if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
r4k_blast_icache_page_indexed =
blast_icache32_r4600_v1_page_indexed;
+ else if (TX49XX_ICACHE_INDEX_INV_WAR)
+ r4k_blast_icache_page_indexed =
+ tx49_blast_icache32_page_indexed;
else
r4k_blast_icache_page_indexed =
blast_icache32_page_indexed;
@@ -361,24 +368,33 @@
struct flush_cache_page_args {
struct vm_area_struct *vma;
- unsigned long page;
+ unsigned long addr;
};
static inline void local_r4k_flush_cache_page(void *args)
{
struct flush_cache_page_args *fcp_args = args;
struct vm_area_struct *vma = fcp_args->vma;
- unsigned long page = fcp_args->page;
+ unsigned long addr = fcp_args->addr;
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- page &= PAGE_MASK;
- pgdp = pgd_offset(mm, page);
- pmdp = pmd_offset(pgdp, page);
- ptep = pte_offset(pmdp, page);
+ /*
+ * If ownes no valid ASID yet, cannot possibly have gotten
+ * this page into the cache.
+ */
+ if (cpu_context(smp_processor_id(), mm) == 0)
+ return;
+
+ addr &= PAGE_MASK;
+ pgdp = pgd_offset(mm, addr);
+ pudp = pud_offset(pgdp, addr);
+ pmdp = pmd_offset(pudp, addr);
+ ptep = pte_offset(pmdp, addr);
/*
* If the page isn't marked valid, the page cannot possibly be
@@ -395,12 +411,12 @@
*/
if ((mm == current->active_mm) && (pte_val(*ptep) & _PAGE_VALID)) {
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- r4k_blast_dcache_page(page);
+ r4k_blast_dcache_page(addr);
if (exec && !cpu_icache_snoops_remote_store)
- r4k_blast_scache_page(page);
+ r4k_blast_scache_page(addr);
}
if (exec)
- r4k_blast_icache_page(page);
+ r4k_blast_icache_page(addr);
return;
}
@@ -409,36 +425,30 @@
* Do indexed flush, too much work to get the (possible) TLB refills
* to work correctly.
*/
- page = INDEX_BASE + (page & (dcache_size - 1));
+ addr = INDEX_BASE + (addr & (dcache_size - 1));
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- r4k_blast_dcache_page_indexed(page);
+ r4k_blast_dcache_page_indexed(addr);
if (exec && !cpu_icache_snoops_remote_store)
- r4k_blast_scache_page_indexed(page);
+ r4k_blast_scache_page_indexed(addr);
}
if (exec) {
if (cpu_has_vtag_icache) {
int cpu = smp_processor_id();
- if (cpu_context(cpu, vma->vm_mm) != 0)
- drop_mmu_context(vma->vm_mm, cpu);
+ if (cpu_context(cpu, mm) != 0)
+ drop_mmu_context(mm, cpu);
} else
- r4k_blast_icache_page_indexed(page);
+ r4k_blast_icache_page_indexed(addr);
}
}
-static void r4k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
+static void r4k_flush_cache_page(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn)
{
struct flush_cache_page_args args;
- /*
- * If ownes no valid ASID yet, cannot possibly have gotten
- * this page into the cache.
- */
- if (cpu_context(smp_processor_id(), vma->vm_mm) == 0)
- return;
-
args.vma = vma;
- args.page = page;
+ args.addr = addr;
on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
@@ -454,16 +464,16 @@
}
struct flush_icache_range_args {
- unsigned long start;
- unsigned long end;
+ unsigned long __user start;
+ unsigned long __user end;
};
static inline void local_r4k_flush_icache_range(void *args)
{
struct flush_icache_range_args *fir_args = args;
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- unsigned long ic_lsize = current_cpu_data.icache.linesz;
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long dc_lsize = cpu_dcache_line_size();
+ unsigned long ic_lsize = cpu_icache_line_size();
+ unsigned long sc_lsize = cpu_scache_line_size();
unsigned long start = fir_args->start;
unsigned long end = fir_args->end;
unsigned long addr, aend;
@@ -472,6 +482,7 @@
if (end - start > dcache_size) {
r4k_blast_dcache();
} else {
+ R4600_HIT_CACHEOP_WAR_IMPL;
addr = start & ~(dc_lsize - 1);
aend = (end - 1) & ~(dc_lsize - 1);
@@ -492,7 +503,7 @@
aend = (end - 1) & ~(sc_lsize - 1);
while (1) {
- /* Hit_Writeback_Inv_D */
+ /* Hit_Writeback_Inv_SD */
protected_writeback_scache_line(addr);
if (addr == aend)
break;
@@ -517,7 +528,8 @@
}
}
-static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+static void r4k_flush_icache_range(unsigned long __user start,
+ unsigned long __user end)
{
struct flush_icache_range_args args;
@@ -525,6 +537,7 @@
args.end = end;
on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+ instruction_hazard();
}
/*
@@ -613,7 +626,7 @@
BUG_ON(size == 0);
if (cpu_has_subset_pcaches) {
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long sc_lsize = cpu_scache_line_size();
if (size >= scache_size) {
r4k_blast_scache();
@@ -639,7 +652,7 @@
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+ unsigned long dc_lsize = cpu_dcache_line_size();
R4600_HIT_CACHEOP_WAR_IMPL;
a = addr & ~(dc_lsize - 1);
@@ -663,7 +676,7 @@
BUG_ON(size == 0);
if (cpu_has_subset_pcaches) {
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long sc_lsize = cpu_scache_line_size();
if (size >= scache_size) {
r4k_blast_scache();
@@ -684,7 +697,7 @@
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+ unsigned long dc_lsize = cpu_dcache_line_size();
R4600_HIT_CACHEOP_WAR_IMPL;
a = addr & ~(dc_lsize - 1);
@@ -708,9 +721,9 @@
*/
static void local_r4k_flush_cache_sigtramp(void * arg)
{
- unsigned long ic_lsize = current_cpu_data.icache.linesz;
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long ic_lsize = cpu_icache_line_size();
+ unsigned long dc_lsize = cpu_dcache_line_size();
+ unsigned long sc_lsize = cpu_scache_line_size();
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
@@ -762,6 +775,7 @@
for (addr = INDEX_BASE; addr <= INDEX_BASE + 4096; addr += ic_lsize) {
__asm__ __volatile__ (
+ ".set push\n\t"
".set noreorder\n\t"
".set mips3\n\t"
"cache\t%1, 0(%0)\n\t"
@@ -776,8 +790,7 @@
"cache\t%1, 0x1000(%0)\n\t"
"cache\t%1, 0x2000(%0)\n\t"
"cache\t%1, 0x3000(%0)\n\t"
- ".set\tmips0\n\t"
- ".set\treorder\n\t"
+ ".set pop\n"
:
: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
}
@@ -1011,9 +1024,19 @@
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
*/
- if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
- if (c->dcache.waysize > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
+ switch (c->cputype) {
+ case CPU_20KC:
+ case CPU_25KF:
+ case CPU_R10000:
+ case CPU_R12000:
+ case CPU_SB1:
+ break;
+ case CPU_24K:
+ if (!(read_c0_config7() & (1 << 16)))
+ default:
+ if (c->dcache.waysize > PAGE_SIZE)
+ c->dcache.flags |= MIPS_CACHE_ALIASES;
+ }
switch (c->cputype) {
case CPU_20KC:
@@ -1024,7 +1047,11 @@
c->icache.flags |= MIPS_CACHE_VTAG;
break;
+ case CPU_AU1000:
case CPU_AU1500:
+ case CPU_AU1100:
+ case CPU_AU1550:
+ case CPU_AU1200:
c->icache.flags |= MIPS_CACHE_IC_F_DC;
break;
}
@@ -1102,7 +1129,6 @@
return 1;
}
-typedef int (*probe_func_t)(unsigned long);
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
@@ -1110,7 +1136,6 @@
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config = read_c0_config();
- probe_func_t probe_scache_kseg1;
int sc_present = 0;
/*
@@ -1123,8 +1148,7 @@
case CPU_R4000MC:
case CPU_R4400SC:
case CPU_R4400MC:
- probe_scache_kseg1 = (probe_func_t) (CKSEG1ADDR(&probe_scache));
- sc_present = probe_scache_kseg1(config);
+ sc_present = run_uncached(probe_scache);
if (sc_present)
c->options |= MIPS_CPU_CACHE_CDEX_S;
break;
@@ -1198,7 +1222,7 @@
}
}
-void __init ld_mmu_r4xx0(void)
+void __init r4k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -1206,15 +1230,11 @@
struct cpuinfo_mips *c = ¤t_cpu_data;
/* Default cache error handler for R4000 and R5000 family */
- memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x80);
- memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_generic, 0x80);
+ set_uncached_handler (0x100, &except_vec2_generic, 0x80);
probe_pcache();
setup_scache();
- if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
-
r4k_blast_dcache_page_setup();
r4k_blast_dcache_page_indexed_setup();
r4k_blast_dcache_setup();
@@ -1252,9 +1272,8 @@
_dma_cache_inv = r4k_dma_cache_inv;
#endif
- __flush_cache_all();
- coherency_setup();
-
build_clear_page();
build_copy_page();
+ local_r4k___flush_cache_all(NULL);
+ coherency_setup();
}
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 502f68c..2f08b53 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -235,7 +235,7 @@
/*
* Invalidate all caches on this CPU
*/
-static void local_sb1___flush_cache_all(void)
+static void __attribute_used__ local_sb1___flush_cache_all(void)
{
__sb1_writeback_inv_dcache_all();
__sb1_flush_icache_all();
@@ -492,19 +492,17 @@
}
/*
- * This is called from loadmmu.c. We have to set up all the
+ * This is called from cache.c. We have to set up all the
* memory management function pointers, as well as initialize
* the caches and tlbs
*/
-void ld_mmu_sb1(void)
+void sb1_cache_init(void)
{
extern char except_vec2_sb1;
extern char handle_vec2_sb1;
/* Special cache error handler for SB1 */
- memcpy((void *)(CAC_BASE + 0x100), &except_vec2_sb1, 0x80);
- memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80);
- memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80);
+ set_uncached_handler (0x100, &except_vec2_sb1, 0x80);
probe_cache_sizes();
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index ff5afab..0a97a94 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -167,15 +167,16 @@
static void tx39_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- struct mm_struct *mm = vma->vm_mm;
+ int exec;
- if (!cpu_has_dc_aliases)
+ if (!(cpu_context(smp_processor_id(), vma->vm_mm)))
return;
- if (cpu_context(smp_processor_id(), mm) != 0) {
+ exec = vma->vm_flags & VM_EXEC;
+ if (cpu_has_dc_aliases || exec)
tx39_blast_dcache();
+ if (exec)
tx39_blast_icache();
- }
}
static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
@@ -183,6 +184,7 @@
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
@@ -195,7 +197,8 @@
page &= PAGE_MASK;
pgdp = pgd_offset(mm, page);
- pmdp = pmd_offset(pgdp, page);
+ pudp = pud_offset(pgdp, page);
+ pmdp = pmd_offset(pudp, page);
ptep = pte_offset(pmdp, page);
/*
@@ -407,7 +410,7 @@
}
}
-void __init ld_mmu_tx39(void)
+void __init tx39_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -490,4 +493,5 @@
build_clear_page();
build_copy_page();
+ tx39h_flush_icache_all();
}
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 1d95cdb..314701a 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -23,8 +23,10 @@
void (*flush_cache_mm)(struct mm_struct *mm);
void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
-void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
-void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
+ unsigned long pfn);
+void (*flush_icache_range)(unsigned long __user start,
+ unsigned long __user end);
void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
/* MIPS specific cache operations */
@@ -32,6 +34,8 @@
void (*flush_data_cache_page)(unsigned long addr);
void (*flush_icache_all)(void);
+EXPORT_SYMBOL(flush_data_cache_page);
+
#ifdef CONFIG_DMA_NONCOHERENT
/* DMA cache operations. */
@@ -49,10 +53,12 @@
* We could optimize the case where the cache argument is not BCACHE but
* that seems very atypical use ...
*/
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long int bytes,
- unsigned int cache)
+asmlinkage int sys_cacheflush(unsigned long __user addr,
+ unsigned long bytes, unsigned int cache)
{
- if (!access_ok(VERIFY_WRITE, (void *) addr, bytes))
+ if (bytes == 0)
+ return 0;
+ if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes))
return -EFAULT;
flush_icache_range(addr, addr + bytes);
@@ -100,58 +106,48 @@
}
}
-extern void ld_mmu_r23000(void);
-extern void ld_mmu_r4xx0(void);
-extern void ld_mmu_tx39(void);
-extern void ld_mmu_r6000(void);
-extern void ld_mmu_tfp(void);
-extern void ld_mmu_andes(void);
-extern void ld_mmu_sb1(void);
+#define __weak __attribute__((weak))
+
+static char cache_panic[] __initdata = "Yeee, unsupported cache architecture.";
void __init cpu_cache_init(void)
{
- if (cpu_has_4ktlb) {
-#if defined(CONFIG_CPU_R4X00) || defined(CONFIG_CPU_VR41XX) || \
- defined(CONFIG_CPU_R4300) || defined(CONFIG_CPU_R5000) || \
- defined(CONFIG_CPU_NEVADA) || defined(CONFIG_CPU_R5432) || \
- defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_MIPS32) || \
- defined(CONFIG_CPU_MIPS64) || defined(CONFIG_CPU_TX49XX) || \
- defined(CONFIG_CPU_RM7000) || defined(CONFIG_CPU_RM9000)
- ld_mmu_r4xx0();
-#endif
- } else switch (current_cpu_data.cputype) {
-#ifdef CONFIG_CPU_R3000
- case CPU_R2000:
- case CPU_R3000:
- case CPU_R3000A:
- case CPU_R3081E:
- ld_mmu_r23000();
- break;
-#endif
-#ifdef CONFIG_CPU_TX39XX
- case CPU_TX3912:
- case CPU_TX3922:
- case CPU_TX3927:
- ld_mmu_tx39();
- break;
-#endif
-#ifdef CONFIG_CPU_R10000
- case CPU_R10000:
- case CPU_R12000:
- ld_mmu_r4xx0();
- break;
-#endif
-#ifdef CONFIG_CPU_SB1
- case CPU_SB1:
- ld_mmu_sb1();
- break;
-#endif
+ if (cpu_has_3k_cache) {
+ extern void __weak r3k_cache_init(void);
- case CPU_R8000:
- panic("R8000 is unsupported");
- break;
-
- default:
- panic("Yeee, unsupported cache architecture.");
+ r3k_cache_init();
+ return;
}
+ if (cpu_has_6k_cache) {
+ extern void __weak r6k_cache_init(void);
+
+ r6k_cache_init();
+ return;
+ }
+ if (cpu_has_4k_cache) {
+ extern void __weak r4k_cache_init(void);
+
+ r4k_cache_init();
+ return;
+ }
+ if (cpu_has_8k_cache) {
+ extern void __weak r8k_cache_init(void);
+
+ r8k_cache_init();
+ return;
+ }
+ if (cpu_has_tx39_cache) {
+ extern void __weak tx39_cache_init(void);
+
+ tx39_cache_init();
+ return;
+ }
+ if (cpu_has_sb1_cache) {
+ extern void __weak sb1_cache_init(void);
+
+ sb1_cache_init();
+ return;
+ }
+
+ panic(cache_panic);
}
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 7166ffe..1cf3c60 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -19,13 +19,19 @@
#include <linux/sched.h>
#include <asm/mipsregs.h>
#include <asm/sibyte/sb1250.h>
-
-#ifndef CONFIG_SIBYTE_BUS_WATCHER
-#include <asm/io.h>
#include <asm/sibyte/sb1250_regs.h>
+
+#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE)
+#include <asm/io.h>
#include <asm/sibyte/sb1250_scd.h>
#endif
+/*
+ * We'd like to dump the L2_ECC_TAG register on errors, but errata make
+ * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.)
+ */
+#undef DUMP_L2_ECC_TAG_ON_ERROR
+
/* SB1 definitions */
/* XXX should come from config1 XXX */
@@ -139,12 +145,18 @@
static void check_bus_watcher(void)
{
uint32_t status, l2_err, memio_err;
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ uint64_t l2_tag;
+#endif
/* Destructive read, clears register and interrupt */
status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
/* Bit 31 is always on, but there's no #define for that */
if (status & ~(1UL << 31)) {
l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+#endif
memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
prom_printf("\nLast recorded signature:\n");
@@ -153,6 +165,9 @@
(int)(G_SCD_BERR_TID(status) >> 6),
(int)G_SCD_BERR_RID(status),
(int)G_SCD_BERR_DCODE(status));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+#endif
} else {
prom_printf("Bus watcher indicates no error\n");
}
@@ -166,6 +181,16 @@
uint64_t cerr_dpa;
uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
+#ifdef CONFIG_SIBYTE_BW_TRACE
+ /* Freeze the trace buffer now */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#else
+ csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#endif
+ prom_printf("Trace buffer frozen\n");
+#endif
+
prom_printf("Cache error exception on CPU %x:\n",
(read_c0_prid() >> 25) & 0x7);
@@ -229,11 +254,19 @@
check_bus_watcher();
- while (1);
/*
- * This tends to make things get really ugly; let's just stall instead.
- * panic("Can't handle the cache error!");
+ * Calling panic() when a fatal cache error occurs scrambles the
+ * state of the system (and the cache), making it difficult to
+ * investigate after the fact. However, if you just stall the CPU,
+ * the other CPU may keep on running, which is typically very
+ * undesirable.
*/
+#ifdef CONFIG_SB1_CERR_STALL
+ while (1)
+ ;
+#else
+ panic("unhandled cache error");
+#endif
}
@@ -434,7 +467,8 @@
};
#define DC_TAG_VALID(state) \
- (((state) == 0xf) || ((state) == 0x13) || ((state) == 0x19) || ((state == 0x16)) || ((state) == 0x1c))
+ (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \
+ ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c))
static char *dc_state_str(unsigned char state)
{
@@ -505,6 +539,7 @@
uint64_t datalo;
uint32_t datalohi, datalolo, datahi;
int offset;
+ char bad_ecc = 0;
for (offset = 0; offset < 4; offset++) {
/* Index-load-data-D */
@@ -525,8 +560,7 @@
ecc = dc_ecc(datalo);
if (ecc != datahi) {
int bits = 0;
- prom_printf(" ** bad ECC (%02x %02x) ->",
- datahi, ecc);
+ bad_ecc |= 1 << (3-offset);
ecc ^= datahi;
while (ecc) {
if (ecc & 1) bits++;
@@ -537,6 +571,10 @@
prom_printf(" %02X-%016llX", datahi, datalo);
}
prom_printf("\n");
+ if (bad_ecc)
+ prom_printf(" dwords w/ bad ECC: %d %d %d %d\n",
+ !!(bad_ecc & 8), !!(bad_ecc & 4),
+ !!(bad_ecc & 2), !!(bad_ecc & 1));
}
}
return res;
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 2c3a23a..0e71580 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -64,6 +64,10 @@
sd k0,0x170($0)
sd k1,0x178($0)
+#if CONFIG_SB1_CEX_ALWAYS_FATAL
+ j handle_vec2_sb1
+ nop
+#else
/*
* M_ERRCTL_RECOVERABLE is bit 31, which makes it easy to tell
* if we can fast-path out of here for a h/w-recovered error.
@@ -134,6 +138,7 @@
/* Unrecoverable Icache or Dcache error; log it and/or fail */
j handle_vec2_sb1
nop
+#endif
END(except_vec2_sb1)
diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c
index a617f8c..f6b3c72 100644
--- a/arch/mips/mm/dma-coherent.c
+++ b/arch/mips/mm/dma-coherent.c
@@ -9,10 +9,10 @@
*/
#include <linux/config.h>
#include <linux/types.h>
+#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <linux/pci.h>
#include <asm/cache.h>
#include <asm/io.h>
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 4ce0202..cd4ea84 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -105,22 +105,7 @@
{
unsigned long addr = (unsigned long) ptr;
- switch (direction) {
- case DMA_TO_DEVICE:
- dma_cache_wback(addr, size);
- break;
-
- case DMA_FROM_DEVICE:
- dma_cache_inv(addr, size);
- break;
-
- case DMA_BIDIRECTIONAL:
- dma_cache_wback_inv(addr, size);
- break;
-
- default:
- BUG();
- }
+ __dma_sync(addr, size, direction);
return virt_to_phys(ptr);
}
@@ -133,22 +118,7 @@
unsigned long addr;
addr = dma_addr + PAGE_OFFSET;
- switch (direction) {
- case DMA_TO_DEVICE:
- //dma_cache_wback(addr, size);
- break;
-
- case DMA_FROM_DEVICE:
- //dma_cache_inv(addr, size);
- break;
-
- case DMA_BIDIRECTIONAL:
- //dma_cache_wback_inv(addr, size);
- break;
-
- default:
- BUG();
- }
+ //__dma_sync(addr, size, direction);
}
EXPORT_SYMBOL(dma_unmap_single);
@@ -164,10 +134,11 @@
unsigned long addr;
addr = (unsigned long) page_address(sg->page);
- if (addr)
+ if (addr) {
__dma_sync(addr + sg->offset, sg->length, direction);
- sg->dma_address = (dma_addr_t)
- (page_to_phys(sg->page) + sg->offset);
+ sg->dma_address = (dma_addr_t)page_to_phys(sg->page)
+ + sg->offset;
+ }
}
return nents;
@@ -218,9 +189,8 @@
for (i = 0; i < nhwentries; i++, sg++) {
addr = (unsigned long) page_address(sg->page);
- if (!addr)
- continue;
- dma_cache_wback_inv(addr + sg->offset, sg->length);
+ if (addr)
+ __dma_sync(addr + sg->offset, sg->length, direction);
}
}
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index ec8077c..2d9624f 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -25,6 +25,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
+#include <asm/highmem.h> /* For VMALLOC_END */
/*
* This routine handles page faults. It determines the address,
@@ -57,7 +58,7 @@
* only copy the information from the master page table,
* nothing more.
*/
- if (unlikely(address >= VMALLOC_START))
+ if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
goto vmalloc_fault;
/*
@@ -140,7 +141,7 @@
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
- info.si_addr = (void *) address;
+ info.si_addr = (void __user *) address;
force_sig_info(SIGSEGV, &info, tsk);
return;
}
@@ -196,7 +197,7 @@
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRERR;
- info.si_addr = (void *) address;
+ info.si_addr = (void __user *) address;
force_sig_info(SIGBUS, &info, tsk);
return;
@@ -212,6 +213,7 @@
*/
int offset = __pgd_offset(address);
pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
@@ -222,8 +224,13 @@
goto no_context;
set_pgd(pgd, *pgd_k);
- pmd = pmd_offset(pgd, address);
- pmd_k = pmd_offset(pgd_k, address);
+ pud = pud_offset(pgd, address);
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto no_context;
set_pmd(pmd, *pmd_k);
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index dd5e2e3..1f7b37b 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -83,6 +83,25 @@
preempt_check_resched();
}
+/*
+ * This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ inc_preempt_count();
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ flush_tlb_one(vaddr);
+
+ return (void*) vaddr;
+}
+
struct page *__kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long)ptr;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index dc6830b..f75ab74 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -83,7 +83,7 @@
pgprot_t kmap_prot;
#define kmap_get_fixmap_pte(vaddr) \
- pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr))
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
static void __init kmap_init(void)
{
@@ -96,36 +96,42 @@
kmap_prot = PAGE_KERNEL;
}
-#ifdef CONFIG_64BIT
-static void __init fixrange_init(unsigned long start, unsigned long end,
+#ifdef CONFIG_32BIT
+void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
- int i, j;
+ int i, j, k;
unsigned long vaddr;
vaddr = start;
i = __pgd_offset(vaddr);
- j = __pmd_offset(vaddr);
+ j = __pud_offset(vaddr);
+ k = __pmd_offset(vaddr);
pgd = pgd_base + i;
for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pmd = (pmd_t *)pgd;
- for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
- if (pmd_none(*pmd)) {
- pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
- set_pmd(pmd, __pmd(pte));
- if (pte != pte_offset_kernel(pmd, 0))
- BUG();
+ pud = (pud_t *)pgd;
+ for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+ pmd = (pmd_t *)pud;
+ for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+ if (pmd_none(*pmd)) {
+ pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ set_pmd(pmd, __pmd(pte));
+ if (pte != pte_offset_kernel(pmd, 0))
+ BUG();
+ }
+ vaddr += PMD_SIZE;
}
- vaddr += PMD_SIZE;
+ k = 0;
}
j = 0;
}
}
-#endif /* CONFIG_64BIT */
+#endif /* CONFIG_32BIT */
#endif /* CONFIG_HIGHMEM */
#ifndef CONFIG_NEED_MULTIPLE_NODES
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index adf3522..9c44ca70 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -79,9 +79,14 @@
BUG();
spin_lock(&init_mm.page_table_lock);
do {
+ pud_t *pud;
pmd_t *pmd;
- pmd = pmd_alloc(&init_mm, dir, address);
+
error = -ENOMEM;
+ pud = pud_alloc(&init_mm, dir, address);
+ if (!pud)
+ break;
+ pmd = pmd_alloc(&init_mm, pud, address);
if (!pmd)
break;
if (remap_area_pmd(pmd, address, end - address,
@@ -97,15 +102,6 @@
}
/*
- * Allow physical addresses to be fixed up to help 36 bit peripherals.
- */
-phys_t __attribute__ ((weak))
-fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
- return phys_addr;
-}
-
-/*
* Generic mapping function (not visible outside):
*/
@@ -121,7 +117,7 @@
#define IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
-void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
+void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
{
struct vm_struct * area;
unsigned long offset;
@@ -141,7 +137,7 @@
*/
if (IS_LOW512(phys_addr) && IS_LOW512(last_addr) &&
flags == _CACHE_UNCACHED)
- return (void *) KSEG1ADDR(phys_addr);
+ return (void __iomem *) CKSEG1ADDR(phys_addr);
/*
* Don't allow anybody to remap normal RAM that we're using..
@@ -177,10 +173,10 @@
return NULL;
}
- return (void *) (offset + (char *)addr);
+ return (void __iomem *) (offset + (char *)addr);
}
-#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1)
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
void __iounmap(volatile void __iomem *addr)
{
@@ -190,10 +186,8 @@
return;
p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
- if (!p) {
+ if (!p)
printk(KERN_ERR "iounmap: bad address %p\n", addr);
- return;
- }
kfree(p);
}
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index 9f8b165..f51e180 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -25,7 +25,10 @@
#include <asm/cpu.h>
#include <asm/war.h>
-#define half_scache_line_size() (cpu_scache_line_size() >> 1)
+#define half_scache_line_size() (cpu_scache_line_size() >> 1)
+#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
+
/*
* Maximum sizes:
@@ -198,15 +201,15 @@
if (store_offset & (cpu_dcache_line_size() - 1))
return;
- if (R4600_V1_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2010)) {
+ if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
build_nop();
build_nop();
build_nop();
build_nop();
}
- if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
- build_insn_word(0x8c200000); /* lw $zero, ($at) */
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
mi.c_format.opcode = cache_op;
mi.c_format.rs = 4; /* $a0 */
@@ -361,7 +364,7 @@
build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_clear : 0));
- if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
dest = label();
@@ -404,9 +407,6 @@
build_jr_ra();
- flush_icache_range((unsigned long)&clear_page_array,
- (unsigned long) epc);
-
BUG_ON(epc > clear_page_array + ARRAY_SIZE(clear_page_array));
}
@@ -420,7 +420,7 @@
build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_copy : 0));
- if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
dest = label();
@@ -482,8 +482,5 @@
build_jr_ra();
- flush_icache_range((unsigned long)©_page_array,
- (unsigned long) epc);
-
BUG_ON(epc > copy_page_array + ARRAY_SIZE(copy_page_array));
}
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index 1b6df71..148c65b 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -60,7 +60,8 @@
" .set noreorder \n"
#ifdef CONFIG_CPU_HAS_PREFETCH
" daddiu %0, %0, 128 \n"
- " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%0) \n" /* Prefetch the first 4 lines */
+ " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%0) \n"
+ /* Prefetch the first 4 lines */
" pref " SB1_PREF_STORE_STREAMED_HINT ", -96(%0) \n"
" pref " SB1_PREF_STORE_STREAMED_HINT ", -64(%0) \n"
" pref " SB1_PREF_STORE_STREAMED_HINT ", -32(%0) \n"
@@ -106,7 +107,8 @@
#ifdef CONFIG_CPU_HAS_PREFETCH
" daddiu %0, %0, 128 \n"
" daddiu %1, %1, 128 \n"
- " pref " SB1_PREF_LOAD_STREAMED_HINT ", -128(%0)\n" /* Prefetch the first 4 lines */
+ " pref " SB1_PREF_LOAD_STREAMED_HINT ", -128(%0)\n"
+ /* Prefetch the first 4 lines */
" pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%1)\n"
" pref " SB1_PREF_LOAD_STREAMED_HINT ", -96(%0)\n"
" pref " SB1_PREF_STORE_STREAMED_HINT ", -96(%1)\n"
@@ -207,66 +209,73 @@
u64 pad_b;
} dmadscr_t;
-static dmadscr_t page_descr[NR_CPUS] __attribute__((aligned(SMP_CACHE_BYTES)));
+static dmadscr_t page_descr[DM_NUM_CHANNELS]
+ __attribute__((aligned(SMP_CACHE_BYTES)));
void sb1_dma_init(void)
{
- int cpu = smp_processor_id();
- u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
+ int i;
- bus_writeq(base_val,
- (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
- bus_writeq(base_val | M_DM_DSCR_BASE_RESET,
- (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
- bus_writeq(base_val | M_DM_DSCR_BASE_ENABL,
- (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+ for (i = 0; i < DM_NUM_CHANNELS; i++) {
+ const u64 base_val = CPHYSADDR(&page_descr[i]) |
+ V_DM_DSCR_BASE_RINGSZ(1);
+ volatile void *base_reg =
+ IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+
+ __raw_writeq(base_val, base_reg);
+ __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
+ __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg);
+ }
}
void clear_page(void *page)
{
- int cpu = smp_processor_id();
+ u64 to_phys = CPHYSADDR(page);
+ unsigned int cpu = smp_processor_id();
- /* if the page is above Kseg0, use old way */
+ /* if the page is not in KSEG0, use old way */
if ((long)KSEGX(page) != (long)CKSEG0)
return clear_page_cpu(page);
- page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+ page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM |
+ M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
- bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+ __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
/*
* Don't really want to do it this way, but there's no
* reliable way to delay completion detection.
*/
- while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
- M_DM_DSCR_BASE_INTERRUPT))))
+ while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+ & M_DM_DSCR_BASE_INTERRUPT))
;
- bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+ __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
}
void copy_page(void *to, void *from)
{
- unsigned long from_phys = CPHYSADDR(from);
- unsigned long to_phys = CPHYSADDR(to);
- int cpu = smp_processor_id();
+ u64 from_phys = CPHYSADDR(from);
+ u64 to_phys = CPHYSADDR(to);
+ unsigned int cpu = smp_processor_id();
- /* if either page is above Kseg0, use old way */
+ /* if any page is not in KSEG0, use old way */
if ((long)KSEGX(to) != (long)CKSEG0
|| (long)KSEGX(from) != (long)CKSEG0)
return copy_page_cpu(to, from);
- page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
- page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
- bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+ page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST |
+ M_DM_DSCRA_INTERRUPT;
+ page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+ __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
/*
* Don't really want to do it this way, but there's no
* reliable way to delay completion detection.
*/
- while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
- M_DM_DSCR_BASE_INTERRUPT))))
+ while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+ & M_DM_DSCR_BASE_INTERRUPT))
;
- bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+ __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
}
#else /* !CONFIG_SIBYTE_DMA_PAGEOPS */
diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index 4f07f81..4a3c491 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
+#include <asm/fixmap.h>
#include <asm/pgtable.h>
void pgd_init(unsigned long page)
@@ -29,42 +30,12 @@
}
}
-#ifdef CONFIG_HIGHMEM
-static void __init fixrange_init (unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte;
- int i, j;
- unsigned long vaddr;
-
- vaddr = start;
- i = __pgd_offset(vaddr);
- j = __pmd_offset(vaddr);
- pgd = pgd_base + i;
-
- for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pmd = (pmd_t *)pgd;
- for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
- if (pmd_none(*pmd)) {
- pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
- set_pmd(pmd, __pmd((unsigned long)pte));
- if (pte != pte_offset_kernel(pmd, 0))
- BUG();
- }
- vaddr += PMD_SIZE;
- }
- j = 0;
- }
-}
-#endif
-
void __init pagetable_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long vaddr;
pgd_t *pgd, *pgd_base;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
#endif
@@ -90,7 +61,8 @@
fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
pgd = swapper_pg_dir + __pgd_offset(vaddr);
- pmd = pmd_offset(pgd, vaddr);
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
pte = pte_offset_kernel(pmd, vaddr);
pkmap_page_table = pte;
#endif
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 4e92f93..9e8ff8b 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -15,6 +15,7 @@
#include <asm/cacheops.h>
#include <asm/mipsregs.h>
#include <asm/processor.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
/* Primary cache parameters. */
#define sc_lsize 32
@@ -96,25 +97,13 @@
}
/*
- * This function is executed in the uncached segment CKSEG1.
- * It must not touch the stack, because the stack pointer still points
- * into CKSEG0.
- *
- * Three options:
- * - Write it in assembly and guarantee that we don't use the stack.
- * - Disable caching for CKSEG0 before calling it.
- * - Pray that GCC doesn't randomly start using the stack.
- *
- * This being Linux, we obviously take the least sane of those options -
- * following DaveM's lead in c-r4k.c
- *
- * It seems we get our kicks from relying on unguaranteed behaviour in GCC
+ * This function is executed in uncached address space.
*/
static __init void __rm7k_sc_enable(void)
{
int i;
- set_c0_config(1 << 3); /* CONF_SE */
+ set_c0_config(RM7K_CONF_SE);
write_c0_taglo(0);
write_c0_taghi(0);
@@ -127,24 +116,22 @@
".set mips0\n\t"
".set reorder"
:
- : "r" (KSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
+ : "r" (CKSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
}
}
static __init void rm7k_sc_enable(void)
{
- void (*func)(void) = (void *) KSEG1ADDR(&__rm7k_sc_enable);
-
- if (read_c0_config() & 0x08) /* CONF_SE */
+ if (read_c0_config() & RM7K_CONF_SE)
return;
- printk(KERN_INFO "Enabling secondary cache...");
- func();
+ printk(KERN_INFO "Enabling secondary cache...\n");
+ run_uncached(__rm7k_sc_enable);
}
static void rm7k_sc_disable(void)
{
- clear_c0_config(1<<3); /* CONF_SE */
+ clear_c0_config(RM7K_CONF_SE);
}
struct bcache_ops rm7k_sc_ops = {
@@ -158,19 +145,19 @@
{
unsigned int config = read_c0_config();
- if ((config >> 31) & 1) /* Bit 31 set -> no S-Cache */
+ if ((config & RM7K_CONF_SC))
return;
printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
(scache_size >> 10), sc_lsize);
- if (!((config >> 3) & 1)) /* CONF_SE */
+ if (!(config & RM7K_CONF_SE))
rm7k_sc_enable();
/*
* While we're at it let's deal with the tertiary cache.
*/
- if (!((config >> 17) & 1)) {
+ if (!(config & RM7K_CONF_TC)) {
/*
* We can't enable the L3 cache yet. There may be board-specific
@@ -183,9 +170,9 @@
* to probe it.
*/
printk(KERN_INFO "Tertiary cache present, %s enabled\n",
- config&(1<<12) ? "already" : "not (yet)");
+ (config & RM7K_CONF_TE) ? "already" : "not (yet)");
- if ((config >> 12) & 1)
+ if ((config & RM7K_CONF_TE))
rm7k_tcache_enabled = 1;
}
diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c
index 167e08e..3f422a8 100644
--- a/arch/mips/mm/tlb-andes.c
+++ b/arch/mips/mm/tlb-andes.c
@@ -195,6 +195,7 @@
{
unsigned long flags;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
int idx, pid;
@@ -220,7 +221,8 @@
write_c0_entryhi(address | (pid));
pgdp = pgd_offset(vma->vm_mm, address);
tlb_probe();
- pmdp = pmd_offset(pgdp, address);
+ pudp = pud_offset(pgdp, address);
+ pmdp = pmd_offset(pudp, address);
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
write_c0_entrylo0(pte_val(*ptep++) >> 6);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 59d38bc..8297970 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -21,6 +21,12 @@
extern void build_tlb_refill_handler(void);
+/*
+ * Make sure all entries differ. If they're not different
+ * MIPS32 will take revenge ...
+ */
+#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
+
/* CP0 hazard avoidance. */
#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
"nop; nop; nop; nop; nop; nop;\n\t" \
@@ -42,11 +48,8 @@
/* Blast 'em all away. */
while (entry < current_cpu_data.tlbsize) {
- /*
- * Make sure all entries differ. If they're not different
- * MIPS32 will take revenge ...
- */
- write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
+ /* Make sure all entries differ. */
+ write_c0_entryhi(UNIQUE_ENTRYHI(entry));
write_c0_index(entry);
mtc0_tlbw_hazard();
tlb_write_indexed();
@@ -57,12 +60,21 @@
local_irq_restore(flags);
}
+/* All entries common to a mm share an asid. To effectively flush
+ these entries, we just bump the asid. */
void local_flush_tlb_mm(struct mm_struct *mm)
{
- int cpu = smp_processor_id();
+ int cpu;
- if (cpu_context(cpu, mm) != 0)
- drop_mmu_context(mm,cpu);
+ preempt_disable();
+
+ cpu = smp_processor_id();
+
+ if (cpu_context(cpu, mm) != 0) {
+ drop_mmu_context(mm, cpu);
+ }
+
+ preempt_enable();
}
void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -75,9 +87,9 @@
unsigned long flags;
int size;
- local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
+ local_irq_save(flags);
if (size <= current_cpu_data.tlbsize/2) {
int oldpid = read_c0_entryhi();
int newpid = cpu_asid(cpu, mm);
@@ -99,8 +111,7 @@
if (idx < 0)
continue;
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 +
- (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
}
@@ -118,9 +129,9 @@
unsigned long flags;
int size;
- local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
+ local_irq_save(flags);
if (size <= current_cpu_data.tlbsize / 2) {
int pid = read_c0_entryhi();
@@ -142,7 +153,7 @@
if (idx < 0)
continue;
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
}
@@ -176,7 +187,7 @@
if (idx < 0)
goto finish;
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
tlbw_use_hazard();
@@ -197,8 +208,8 @@
int oldpid, idx;
local_irq_save(flags);
- page &= (PAGE_MASK << 1);
oldpid = read_c0_entryhi();
+ page &= (PAGE_MASK << 1);
write_c0_entryhi(page);
mtc0_tlbw_hazard();
tlb_probe();
@@ -208,7 +219,7 @@
write_c0_entrylo1(0);
if (idx >= 0) {
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
tlbw_use_hazard();
@@ -227,6 +238,7 @@
{
unsigned long flags;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
int idx, pid;
@@ -237,35 +249,34 @@
if (current->active_mm != vma->vm_mm)
return;
- pid = read_c0_entryhi() & ASID_MASK;
-
local_irq_save(flags);
+
+ pid = read_c0_entryhi() & ASID_MASK;
address &= (PAGE_MASK << 1);
write_c0_entryhi(address | pid);
pgdp = pgd_offset(vma->vm_mm, address);
mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
- pmdp = pmd_offset(pgdp, address);
+ pudp = pud_offset(pgdp, address);
+ pmdp = pmd_offset(pudp, address);
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
- #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
- write_c0_entrylo0(ptep->pte_high);
- ptep++;
- write_c0_entrylo1(ptep->pte_high);
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+ write_c0_entrylo0(ptep->pte_high);
+ ptep++;
+ write_c0_entrylo1(ptep->pte_high);
#else
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
+ write_c0_entrylo0(pte_val(*ptep++) >> 6);
+ write_c0_entrylo1(pte_val(*ptep) >> 6);
#endif
- write_c0_entryhi(address | pid);
mtc0_tlbw_hazard();
if (idx < 0)
tlb_write_random();
else
tlb_write_indexed();
tlbw_use_hazard();
- write_c0_entryhi(pid);
local_irq_restore(flags);
}
@@ -357,7 +368,8 @@
old_pagemask = read_c0_pagemask();
wired = read_c0_wired();
if (--temp_tlb_entry < wired) {
- printk(KERN_WARNING "No TLB space left for add_temporary_entry\n");
+ printk(KERN_WARNING
+ "No TLB space left for add_temporary_entry\n");
ret = -ENOSPC;
goto out;
}
@@ -388,7 +400,7 @@
* is not supported, we assume R4k style. Cpu probing already figured
* out the number of tlb entries.
*/
- if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
+ if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
return;
reg = read_c0_config1();
diff --git a/arch/mips/mm/tlb-sb1.c b/arch/mips/mm/tlb-sb1.c
deleted file mode 100644
index 6256caf..0000000
--- a/arch/mips/mm/tlb-sb1.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997, 2001 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-
-extern void build_tlb_refill_handler(void);
-
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
-/* Dump the current entry* and pagemask registers */
-static inline void dump_cur_tlb_regs(void)
-{
- unsigned int entryhihi, entryhilo, entrylo0hi, entrylo0lo, entrylo1hi;
- unsigned int entrylo1lo, pagemask;
-
- __asm__ __volatile__ (
- ".set push \n"
- ".set noreorder \n"
- ".set mips64 \n"
- ".set noat \n"
- " tlbr \n"
- " dmfc0 $1, $10 \n"
- " dsrl32 %0, $1, 0 \n"
- " sll %1, $1, 0 \n"
- " dmfc0 $1, $2 \n"
- " dsrl32 %2, $1, 0 \n"
- " sll %3, $1, 0 \n"
- " dmfc0 $1, $3 \n"
- " dsrl32 %4, $1, 0 \n"
- " sll %5, $1, 0 \n"
- " mfc0 %6, $5 \n"
- ".set pop \n"
- : "=r" (entryhihi), "=r" (entryhilo),
- "=r" (entrylo0hi), "=r" (entrylo0lo),
- "=r" (entrylo1hi), "=r" (entrylo1lo),
- "=r" (pagemask));
-
- printk("%08X%08X %08X%08X %08X%08X %08X",
- entryhihi, entryhilo,
- entrylo0hi, entrylo0lo,
- entrylo1hi, entrylo1lo,
- pagemask);
-}
-
-void sb1_dump_tlb(void)
-{
- unsigned long old_ctx;
- unsigned long flags;
- int entry;
- local_irq_save(flags);
- old_ctx = read_c0_entryhi();
- printk("Current TLB registers state:\n"
- " EntryHi EntryLo0 EntryLo1 PageMask Index\n"
- "--------------------------------------------------------------------\n");
- dump_cur_tlb_regs();
- printk(" %08X\n", read_c0_index());
- printk("\n\nFull TLB Dump:\n"
- "Idx EntryHi EntryLo0 EntryLo1 PageMask\n"
- "--------------------------------------------------------------\n");
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- write_c0_index(entry);
- printk("\n%02i ", entry);
- dump_cur_tlb_regs();
- }
- printk("\n");
- write_c0_entryhi(old_ctx);
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags;
- unsigned long old_ctx;
- int entry;
-
- local_irq_save(flags);
- /* Save old context and create impossible VPN2 value */
- old_ctx = read_c0_entryhi() & ASID_MASK;
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
-
- entry = read_c0_wired();
- while (entry < current_cpu_data.tlbsize) {
- write_c0_entryhi(UNIQUE_ENTRYHI(entry));
- write_c0_index(entry);
- tlb_write_indexed();
- entry++;
- }
- write_c0_entryhi(old_ctx);
- local_irq_restore(flags);
-}
-
-
-/*
- * Use a bogus region of memory (starting at 0) to sanitize the TLB's.
- * Use increments of the maximum page size (16MB), and check for duplicate
- * entries before doing a given write. Then, when we're safe from collisions
- * with the firmware, go back and give all the entries invalid addresses with
- * the normal flush routine. Wired entries will be killed as well!
- */
-static void __init sb1_sanitize_tlb(void)
-{
- int entry;
- long addr = 0;
-
- long inc = 1<<24; /* 16MB */
- /* Save old context and create impossible VPN2 value */
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- do {
- addr += inc;
- write_c0_entryhi(addr);
- tlb_probe();
- } while ((int)(read_c0_index()) >= 0);
- write_c0_index(entry);
- tlb_write_indexed();
- }
- /* Now that we know we're safe from collisions, we can safely flush
- the TLB with the "normal" routine. */
- local_flush_tlb_all();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned long flags;
- int cpu;
-
- local_irq_save(flags);
- cpu = smp_processor_id();
- if (cpu_context(cpu, mm) != 0) {
- int size;
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- size = (size + 1) >> 1;
- if (size <= (current_cpu_data.tlbsize/2)) {
- int oldpid = read_c0_entryhi() & ASID_MASK;
- int newpid = cpu_asid(cpu, mm);
-
- start &= (PAGE_MASK << 1);
- end += ((PAGE_SIZE << 1) - 1);
- end &= (PAGE_MASK << 1);
- while (start < end) {
- int idx;
-
- write_c0_entryhi(start | newpid);
- start += (PAGE_SIZE << 1);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- if (idx < 0)
- continue;
- tlb_write_indexed();
- }
- write_c0_entryhi(oldpid);
- } else {
- drop_mmu_context(mm, cpu);
- }
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned long flags;
- int size;
-
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- size = (size + 1) >> 1;
-
- local_irq_save(flags);
- if (size <= (current_cpu_data.tlbsize/2)) {
- int pid = read_c0_entryhi();
-
- start &= (PAGE_MASK << 1);
- end += ((PAGE_SIZE << 1) - 1);
- end &= (PAGE_MASK << 1);
-
- while (start < end) {
- int idx;
-
- write_c0_entryhi(start);
- start += (PAGE_SIZE << 1);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- if (idx < 0)
- continue;
- tlb_write_indexed();
- }
- write_c0_entryhi(pid);
- } else {
- local_flush_tlb_all();
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned long flags;
- int cpu = smp_processor_id();
-
- local_irq_save(flags);
- if (cpu_context(cpu, vma->vm_mm) != 0) {
- int oldpid, newpid, idx;
- newpid = cpu_asid(cpu, vma->vm_mm);
- page &= (PAGE_MASK << 1);
- oldpid = read_c0_entryhi() & ASID_MASK;
- write_c0_entryhi(page | newpid);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- if (idx < 0)
- goto finish;
- /* Make sure all entries differ. */
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- tlb_write_indexed();
- finish:
- write_c0_entryhi(oldpid);
- }
- local_irq_restore(flags);
-}
-
-/*
- * Remove one kernel space TLB entry. This entry is assumed to be marked
- * global so we don't do the ASID thing.
- */
-void local_flush_tlb_one(unsigned long page)
-{
- unsigned long flags;
- int oldpid, idx;
-
- page &= (PAGE_MASK << 1);
- oldpid = read_c0_entryhi() & ASID_MASK;
-
- local_irq_save(flags);
- write_c0_entryhi(page);
- tlb_probe();
- idx = read_c0_index();
- if (idx >= 0) {
- /* Make sure all entries differ. */
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- tlb_write_indexed();
- }
-
- write_c0_entryhi(oldpid);
- local_irq_restore(flags);
-}
-
-/* All entries common to a mm share an asid. To effectively flush
- these entries, we just bump the asid. */
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- int cpu;
-
- preempt_disable();
-
- cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) != 0) {
- drop_mmu_context(mm, cpu);
- }
-
- preempt_enable();
-}
-
-/* Stolen from mips32 routines */
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags;
- pgd_t *pgdp;
- pmd_t *pmdp;
- pte_t *ptep;
- int idx, pid;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- pid = read_c0_entryhi() & ASID_MASK;
- address &= (PAGE_MASK << 1);
- write_c0_entryhi(address | (pid));
- pgdp = pgd_offset(vma->vm_mm, address);
- tlb_probe();
- pmdp = pmd_offset(pgdp, address);
- idx = read_c0_index();
- ptep = pte_offset_map(pmdp, address);
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
- if (idx < 0) {
- tlb_write_random();
- } else {
- tlb_write_indexed();
- }
- local_irq_restore(flags);
-}
-
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
-{
- unsigned long flags;
- unsigned long wired;
- unsigned long old_pagemask;
- unsigned long old_ctx;
-
- local_irq_save(flags);
- old_ctx = read_c0_entryhi() & 0xff;
- old_pagemask = read_c0_pagemask();
- wired = read_c0_wired();
- write_c0_wired(wired + 1);
- write_c0_index(wired);
-
- write_c0_pagemask(pagemask);
- write_c0_entryhi(entryhi);
- write_c0_entrylo0(entrylo0);
- write_c0_entrylo1(entrylo1);
- tlb_write_indexed();
-
- write_c0_entryhi(old_ctx);
- write_c0_pagemask(old_pagemask);
-
- local_flush_tlb_all();
- local_irq_restore(flags);
-}
-
-/*
- * This is called from loadmmu.c. We have to set up all the
- * memory management function pointers, as well as initialize
- * the caches and tlbs
- */
-void tlb_init(void)
-{
- write_c0_pagemask(PM_DEFAULT_MASK);
- write_c0_wired(0);
-
- /*
- * We don't know what state the firmware left the TLB's in, so this is
- * the ultra-conservative way to flush the TLB's and avoid machine
- * check exceptions due to duplicate TLB entries
- */
- sb1_sanitize_tlb();
-
- build_tlb_refill_handler();
-}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 6569be3..0f94858 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -6,6 +6,7 @@
* Synthesize TLB refill handlers at runtime.
*
* Copyright (C) 2004,2005 by Thiemo Seufer
+ * Copyright (C) 2005 Maciej W. Rozycki
*/
#include <stdarg.h>
@@ -91,7 +92,7 @@
insn_addu, insn_addiu, insn_and, insn_andi, insn_beq,
insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0,
- insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32,
+ insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld,
insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0,
insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
@@ -134,7 +135,6 @@
{ insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE },
{ insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE },
{ insn_dsrl, M(spec_op,0,0,0,0,dsrl_op), RT | RD | RE },
- { insn_dsrl32, M(spec_op,0,0,0,0,dsrl32_op), RT | RD | RE },
{ insn_dsubu, M(spec_op,0,0,0,0,dsubu_op), RS | RT | RD },
{ insn_eret, M(cop0_op,cop_op,0,0,0,eret_op), 0 },
{ insn_j, M(j_op,0,0,0,0,0), JIMM },
@@ -366,7 +366,6 @@
I_u2u1u3(_dsll32);
I_u2u1u3(_dsra);
I_u2u1u3(_dsrl);
-I_u2u1u3(_dsrl32);
I_u3u1u2(_dsubu);
I_0(_eret);
I_u1(_j);
@@ -412,7 +411,6 @@
label_nopage_tlbm,
label_smp_pgtable_change,
label_r3000_write_probe_fail,
- label_r3000_write_probe_ok
};
struct label {
@@ -445,7 +443,6 @@
L_LA(_nopage_tlbm)
L_LA(_smp_pgtable_change)
L_LA(_r3000_write_probe_fail)
-L_LA(_r3000_write_probe_ok)
/* convenience macros for instructions */
#ifdef CONFIG_64BIT
@@ -490,7 +487,7 @@
static __init int __attribute__((unused)) in_compat_space_p(long addr)
{
/* Is this address in 32bit compat space? */
- return (((addr) & 0xffffffff00000000) == 0xffffffff00000000);
+ return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L);
}
static __init int __attribute__((unused)) rel_highest(long val)
@@ -734,7 +731,7 @@
if (p > tlb_handler + 32)
panic("TLB refill handler space exceeded");
- printk("Synthesized TLB handler (%u instructions).\n",
+ printk("Synthesized TLB refill handler (%u instructions).\n",
(unsigned int)(p - tlb_handler));
#ifdef DEBUG_TLB
{
@@ -746,7 +743,6 @@
#endif
memcpy((void *)CAC_BASE, tlb_handler, 0x80);
- flush_icache_range(CAC_BASE, CAC_BASE + 0x80);
}
/*
@@ -783,6 +779,8 @@
static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_data.cputype) {
+ /* Found by experiment: R4600 v2.0 needs this, too. */
+ case CPU_R4600:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
@@ -834,12 +832,20 @@
case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
+ i_nop(p);
+ tlbw(p);
+ i_nop(p);
+ break;
+
+ case CPU_R4300:
case CPU_5KC:
case CPU_TX49XX:
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
case CPU_AU1550:
+ case CPU_AU1200:
+ case CPU_PR4450:
i_nop(p);
tlbw(p);
break;
@@ -848,6 +854,7 @@
case CPU_R12000:
case CPU_4KC:
case CPU_SB1:
+ case CPU_SB1A:
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
@@ -875,6 +882,7 @@
case CPU_4KEC:
case CPU_24K:
+ case CPU_34K:
i_ehb(p);
tlbw(p);
break;
@@ -911,6 +919,7 @@
case CPU_VR4131:
case CPU_VR4133:
+ case CPU_R5432:
i_nop(p);
i_nop(p);
tlbw(p);
@@ -942,34 +951,29 @@
/* No i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
+# ifdef CONFIG_BUILD_ELF64
/*
- * 64 bit SMP has the lower part of &pgd_current[smp_processor_id()]
+ * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
- if (in_compat_space_p(pgdc)) {
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_dsra(p, ptr, ptr, 23);
- i_ld(p, ptr, 0, ptr);
- } else {
-#ifdef CONFIG_BUILD_ELF64
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_dsrl(p, ptr, ptr, 23);
- i_dsll(p, ptr, ptr, 3);
- i_LA_mostly(p, tmp, pgdc);
- i_daddu(p, ptr, ptr, tmp);
- i_dmfc0(p, tmp, C0_BADVADDR);
- i_ld(p, ptr, rel_lo(pgdc), ptr);
-#else
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_lui(p, tmp, rel_highest(pgdc));
- i_dsll(p, ptr, ptr, 9);
- i_daddiu(p, tmp, tmp, rel_higher(pgdc));
- i_dsrl32(p, ptr, ptr, 0);
- i_and(p, ptr, ptr, tmp);
- i_dmfc0(p, tmp, C0_BADVADDR);
- i_ld(p, ptr, 0, ptr);
-#endif
- }
+ i_dmfc0(p, ptr, C0_CONTEXT);
+ i_dsrl(p, ptr, ptr, 23);
+ i_LA_mostly(p, tmp, pgdc);
+ i_daddu(p, ptr, ptr, tmp);
+ i_dmfc0(p, tmp, C0_BADVADDR);
+ i_ld(p, ptr, rel_lo(pgdc), ptr);
+# else
+ /*
+ * 64 bit SMP running in compat space has the lower part of
+ * &pgd_current[smp_processor_id()] stored in CONTEXT.
+ */
+ if (!in_compat_space_p(pgdc))
+ panic("Invalid page directory address!");
+
+ i_dmfc0(p, ptr, C0_CONTEXT);
+ i_dsra(p, ptr, ptr, 23);
+ i_ld(p, ptr, 0, ptr);
+# endif
#else
i_LA_mostly(p, ptr, pgdc);
i_ld(p, ptr, rel_lo(pgdc), ptr);
@@ -1026,7 +1030,6 @@
i_mfc0(p, ptr, C0_CONTEXT);
i_LA_mostly(p, tmp, pgdc);
i_srl(p, ptr, ptr, 23);
- i_sll(p, ptr, ptr, 2);
i_addu(p, ptr, tmp, ptr);
#else
i_LA_mostly(p, ptr, pgdc);
@@ -1245,13 +1248,19 @@
{
int i;
- for (i = 0; i < 64; i++)
- printk("%08x\n", final_handler[i]);
+ f = final_handler;
+#ifdef CONFIG_64BIT
+ if (final_len > 32)
+ final_len = 64;
+ else
+ f = final_handler + 32;
+#endif /* CONFIG_64BIT */
+ for (i = 0; i < final_len; i++)
+ printk("%08x\n", f[i]);
}
#endif
memcpy((void *)CAC_BASE, final_handler, 0x100);
- flush_icache_range(CAC_BASE, CAC_BASE + 0x100);
}
/*
@@ -1277,37 +1286,41 @@
u32 __tlb_handler_align handle_tlbm[FASTPATH_SIZE];
static void __init
-iPTE_LW(u32 **p, struct label **l, unsigned int pte, int offset,
- unsigned int ptr)
+iPTE_LW(u32 **p, struct label **l, unsigned int pte, unsigned int ptr)
{
#ifdef CONFIG_SMP
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_lld(p, pte, offset, ptr);
+ i_lld(p, pte, 0, ptr);
else
# endif
- i_LL(p, pte, offset, ptr);
+ i_LL(p, pte, 0, ptr);
#else
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_ld(p, pte, offset, ptr);
+ i_ld(p, pte, 0, ptr);
else
# endif
- i_LW(p, pte, offset, ptr);
+ i_LW(p, pte, 0, ptr);
#endif
}
static void __init
-iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
- unsigned int ptr)
+iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, unsigned int ptr,
+ unsigned int mode)
{
+#ifdef CONFIG_64BIT_PHYS_ADDR
+ unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
+#endif
+
+ i_ori(p, pte, pte, mode);
#ifdef CONFIG_SMP
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_scd(p, pte, offset, ptr);
+ i_scd(p, pte, 0, ptr);
else
# endif
- i_SC(p, pte, offset, ptr);
+ i_SC(p, pte, 0, ptr);
if (r10000_llsc_war())
il_beqzl(p, r, pte, label_smp_pgtable_change);
@@ -1318,7 +1331,7 @@
if (!cpu_has_64bits) {
/* no i_nop needed */
i_ll(p, pte, sizeof(pte_t) / 2, ptr);
- i_ori(p, pte, pte, _PAGE_VALID);
+ i_ori(p, pte, pte, hwmode);
i_sc(p, pte, sizeof(pte_t) / 2, ptr);
il_beqz(p, r, pte, label_smp_pgtable_change);
/* no i_nop needed */
@@ -1331,15 +1344,15 @@
#else
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_sd(p, pte, offset, ptr);
+ i_sd(p, pte, 0, ptr);
else
# endif
- i_SW(p, pte, offset, ptr);
+ i_SW(p, pte, 0, ptr);
# ifdef CONFIG_64BIT_PHYS_ADDR
if (!cpu_has_64bits) {
i_lw(p, pte, sizeof(pte_t) / 2, ptr);
- i_ori(p, pte, pte, _PAGE_VALID);
+ i_ori(p, pte, pte, hwmode);
i_sw(p, pte, sizeof(pte_t) / 2, ptr);
i_lw(p, pte, 0, ptr);
}
@@ -1359,7 +1372,7 @@
i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
il_bnez(p, r, pte, lid);
- iPTE_LW(p, l, pte, 0, ptr);
+ iPTE_LW(p, l, pte, ptr);
}
/* Make PTE valid, store result in PTR. */
@@ -1367,8 +1380,9 @@
build_make_valid(u32 **p, struct reloc **r, unsigned int pte,
unsigned int ptr)
{
- i_ori(p, pte, pte, _PAGE_VALID | _PAGE_ACCESSED);
- iPTE_SW(p, r, pte, 0, ptr);
+ unsigned int mode = _PAGE_VALID | _PAGE_ACCESSED;
+
+ iPTE_SW(p, r, pte, ptr, mode);
}
/*
@@ -1382,7 +1396,7 @@
i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
il_bnez(p, r, pte, lid);
- iPTE_LW(p, l, pte, 0, ptr);
+ iPTE_LW(p, l, pte, ptr);
}
/* Make PTE writable, update software status bits as well, then store
@@ -1392,9 +1406,10 @@
build_make_write(u32 **p, struct reloc **r, unsigned int pte,
unsigned int ptr)
{
- i_ori(p, pte, pte,
- _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
- iPTE_SW(p, r, pte, 0, ptr);
+ unsigned int mode = (_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID
+ | _PAGE_DIRTY);
+
+ iPTE_SW(p, r, pte, ptr, mode);
}
/*
@@ -1407,41 +1422,48 @@
{
i_andi(p, pte, pte, _PAGE_WRITE);
il_beqz(p, r, pte, lid);
- iPTE_LW(p, l, pte, 0, ptr);
+ iPTE_LW(p, l, pte, ptr);
}
/*
* R3000 style TLB load/store/modify handlers.
*/
-/* This places the pte in the page table at PTR into ENTRYLO0. */
+/*
+ * This places the pte into ENTRYLO0 and writes it with tlbwi.
+ * Then it returns.
+ */
static void __init
-build_r3000_pte_reload(u32 **p, unsigned int ptr)
+build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
{
- i_lw(p, ptr, 0, ptr);
- i_nop(p); /* load delay */
- i_mtc0(p, ptr, C0_ENTRYLO0);
- i_nop(p); /* cp0 delay */
+ i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+ i_mfc0(p, tmp, C0_EPC); /* cp0 delay */
+ i_tlbwi(p);
+ i_jr(p, tmp);
+ i_rfe(p); /* branch delay */
}
/*
- * The index register may have the probe fail bit set,
- * because we would trap on access kseg2, i.e. without refill.
+ * This places the pte into ENTRYLO0 and writes it with tlbwi
+ * or tlbwr as appropriate. This is because the index register
+ * may have the probe fail bit set as a result of a trap on a
+ * kseg2 access, i.e. without refill. Then it returns.
*/
static void __init
-build_r3000_tlb_write(u32 **p, struct label **l, struct reloc **r,
- unsigned int tmp)
+build_r3000_tlb_reload_write(u32 **p, struct label **l, struct reloc **r,
+ unsigned int pte, unsigned int tmp)
{
i_mfc0(p, tmp, C0_INDEX);
- i_nop(p); /* cp0 delay */
- il_bltz(p, r, tmp, label_r3000_write_probe_fail);
- i_nop(p); /* branch delay */
- i_tlbwi(p);
- il_b(p, r, label_r3000_write_probe_ok);
- i_nop(p); /* branch delay */
+ i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+ il_bltz(p, r, tmp, label_r3000_write_probe_fail); /* cp0 delay */
+ i_mfc0(p, tmp, C0_EPC); /* branch delay */
+ i_tlbwi(p); /* cp0 delay */
+ i_jr(p, tmp);
+ i_rfe(p); /* branch delay */
l_r3000_write_probe_fail(l, *p);
- i_tlbwr(p);
- l_r3000_write_probe_ok(l, *p);
+ i_tlbwr(p); /* cp0 delay */
+ i_jr(p, tmp);
+ i_rfe(p); /* branch delay */
}
static void __init
@@ -1461,17 +1483,7 @@
i_andi(p, pte, pte, 0xffc); /* load delay */
i_addu(p, ptr, ptr, pte);
i_lw(p, pte, 0, ptr);
- i_nop(p); /* load delay */
- i_tlbp(p);
-}
-
-static void __init
-build_r3000_tlbchange_handler_tail(u32 **p, unsigned int tmp)
-{
- i_mfc0(p, tmp, C0_EPC);
- i_nop(p); /* cp0 delay */
- i_jr(p, tmp);
- i_rfe(p); /* branch delay */
+ i_tlbp(p); /* load delay */
}
static void __init build_r3000_tlb_load_handler(void)
@@ -1486,10 +1498,9 @@
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
+ i_nop(&p); /* load delay */
build_make_valid(&p, &r, K0, K1);
- build_r3000_pte_reload(&p, K1);
- build_r3000_tlb_write(&p, &l, &r, K0);
- build_r3000_tlbchange_handler_tail(&p, K0);
+ build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
l_nopage_tlbl(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff);
@@ -1506,13 +1517,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbl); i++)
printk("%08x\n", handle_tlbl[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbl,
- (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r3000_tlb_store_handler(void)
@@ -1527,10 +1535,9 @@
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
+ i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
- build_r3000_pte_reload(&p, K1);
- build_r3000_tlb_write(&p, &l, &r, K0);
- build_r3000_tlbchange_handler_tail(&p, K0);
+ build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
l_nopage_tlbs(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1547,13 +1554,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbs); i++)
printk("%08x\n", handle_tlbs[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbs,
- (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r3000_tlb_modify_handler(void)
@@ -1568,10 +1572,9 @@
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
+ i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
- build_r3000_pte_reload(&p, K1);
- i_tlbwi(&p);
- build_r3000_tlbchange_handler_tail(&p, K0);
+ build_r3000_pte_reload_tlbwi(&p, K0, K1);
l_nopage_tlbm(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1588,13 +1591,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbm); i++)
printk("%08x\n", handle_tlbm[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbm,
- (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
}
/*
@@ -1620,7 +1620,7 @@
#ifdef CONFIG_SMP
l_smp_pgtable_change(l, *p);
# endif
- iPTE_LW(p, l, pte, 0, ptr); /* get even pte */
+ iPTE_LW(p, l, pte, ptr); /* get even pte */
build_tlb_probe_entry(p);
}
@@ -1680,13 +1680,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbl); i++)
printk("%08x\n", handle_tlbl[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbl,
- (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r4000_tlb_store_handler(void)
@@ -1719,13 +1716,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbs); i++)
printk("%08x\n", handle_tlbs[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbs,
- (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r4000_tlb_modify_handler(void)
@@ -1759,13 +1753,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbm); i++)
printk("%08x\n", handle_tlbm[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbm,
- (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
}
void __init build_tlb_refill_handler(void)
@@ -1813,3 +1804,13 @@
}
}
}
+
+void __init flush_tlb_handlers(void)
+{
+ flush_icache_range((unsigned long)handle_tlbl,
+ (unsigned long)handle_tlbl + sizeof(handle_tlbl));
+ flush_icache_range((unsigned long)handle_tlbs,
+ (unsigned long)handle_tlbs + sizeof(handle_tlbs));
+ flush_icache_range((unsigned long)handle_tlbm,
+ (unsigned long)handle_tlbm + sizeof(handle_tlbm));
+}
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
new file mode 100644
index 0000000..70a61cf
--- /dev/null
+++ b/arch/mips/momentum/Kconfig
@@ -0,0 +1,6 @@
+config JAGUAR_DMALOW
+ bool "Low DMA Mode"
+ depends on MOMENCO_JAGUAR_ATX
+ help
+ Select to Y if jump JP5 is set on your board, N otherwise. Normally
+ the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
index 14ae2e7..aae7a80 100644
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -236,8 +236,9 @@
#endif
}
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
{
+ return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 90288cf..768bf44 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -351,7 +351,7 @@
arch_initcall(ja_pci_init);
-static int __init momenco_jaguar_atx_setup(void)
+void __init plat_setup(void)
{
unsigned int tmpword;
@@ -467,8 +467,4 @@
}
#endif
-
- return 0;
}
-
-early_initcall(momenco_jaguar_atx_setup);
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index c4fa9c5..9803daa 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -239,8 +239,9 @@
#endif
}
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
{
+ return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index ce2efcb..a7803e0 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -307,7 +307,7 @@
arch_initcall(ja_pci_init);
-static int __init momenco_ocelot_3_setup(void)
+void __init plat_setup(void)
{
unsigned int tmpword;
@@ -391,8 +391,4 @@
/* Support for 128 MB memory */
add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
-
- return 0;
}
-
-early_initcall(momenco_ocelot_3_setup);
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
index dea48b3..bd88578 100644
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ b/arch/mips/momentum/ocelot_c/cpci-irq.c
@@ -129,14 +129,13 @@
#define shutdown_cpci_irq disable_cpci_irq
struct hw_interrupt_type cpci_irq_type = {
- "CPCI/FPGA",
- startup_cpci_irq,
- shutdown_cpci_irq,
- enable_cpci_irq,
- disable_cpci_irq,
- mask_and_ack_cpci_irq,
- end_cpci_irq,
- NULL
+ .typename = "CPCI/FPGA",
+ .startup = startup_cpci_irq,
+ .shutdown = shutdown_cpci_irq,
+ .enable = enable_cpci_irq,
+ .disable = disable_cpci_irq,
+ .ack = mask_and_ack_cpci_irq,
+ .end = end_cpci_irq,
};
void cpci_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 844ddd0..ce70fc9 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -222,7 +222,7 @@
rtc_set_time = m48t37y_set_time;
}
-static void __init momenco_ocelot_c_setup(void)
+void __init plat_setup(void)
{
unsigned int tmpword;
@@ -340,8 +340,6 @@
}
}
-early_initcall(momenco_ocelot_c_setup);
-
#ifndef CONFIG_64BIT
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
index ebe1507..755bde5 100644
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ b/arch/mips/momentum/ocelot_c/uart-irq.c
@@ -122,14 +122,13 @@
#define shutdown_uart_irq disable_uart_irq
struct hw_interrupt_type uart_irq_type = {
- "UART/FPGA",
- startup_uart_irq,
- shutdown_uart_irq,
- enable_uart_irq,
- disable_uart_irq,
- mask_and_ack_uart_irq,
- end_uart_irq,
- NULL
+ .typename = "UART/FPGA",
+ .startup = startup_uart_irq,
+ .shutdown = shutdown_uart_irq,
+ .enable = enable_uart_irq,
+ .disable = disable_uart_irq,
+ .ack = mask_and_ack_uart_irq,
+ .end = end_uart_irq,
};
void uart_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 38a78ab..6336751 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -160,7 +160,7 @@
printk("Done\n");
}
-static int __init momenco_ocelot_g_setup(void)
+void __init plat_setup(void)
{
void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
unsigned int tmpword;
@@ -240,12 +240,8 @@
/* FIXME: Fix up the DiskOnChip mapping */
MV_WRITE(0x468, 0xfef73);
-
- return 0;
}
-early_initcall(momenco_ocelot_g_setup);
-
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig
index 19d3773..55feaf7 100644
--- a/arch/mips/oprofile/Kconfig
+++ b/arch/mips/oprofile/Kconfig
@@ -11,7 +11,7 @@
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING
+ depends on PROFILING && EXPERIMENTAL
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index ab65ce3..dd2cc42 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -3,7 +3,8 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004 by Ralf Baechle
+ * Copyright (C) 2004, 2005 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
*/
#include <linux/errno.h>
#include <linux/init.h>
@@ -45,10 +46,10 @@
oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- /* Dummies. */
oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
oprofilefs_create_ulong(sb, dir, "exl", &ctr[i].exl);
+ /* Dummy. */
oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
}
@@ -68,9 +69,10 @@
on_each_cpu(model->cpu_stop, NULL, 0, 1);
}
-void __init oprofile_arch_init(struct oprofile_operations *ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
struct op_mips_model *lmodel = NULL;
+ int res;
switch (current_cpu_data.cputype) {
case CPU_24K:
@@ -83,21 +85,25 @@
};
if (!lmodel)
- return;
+ return -ENODEV;
- if (lmodel->init())
- return;
+ res = lmodel->init();
+ if (res)
+ return res;
model = lmodel;
- ops->create_files = op_mips_create_files;
- ops->setup = op_mips_setup;
- ops->start = op_mips_start;
- ops->stop = op_mips_stop;
- ops->cpu_type = lmodel->cpu_type;
+ ops->create_files = op_mips_create_files;
+ ops->setup = op_mips_setup;
+ //ops->shutdown = op_mips_shutdown;
+ ops->start = op_mips_start;
+ ops->stop = op_mips_stop;
+ ops->cpu_type = lmodel->cpu_type;
printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
lmodel->cpu_type);
+
+ return 0;
}
void oprofile_arch_exit(void)
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 9f5cdff..f012155 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -10,6 +10,11 @@
#ifndef OP_IMPL_H
#define OP_IMPL_H 1
+struct pt_regs;
+
+extern void null_perf_irq(struct pt_regs *regs);
+extern void (*perf_irq)(struct pt_regs *regs);
+
/* Per-counter configuration as set via oprofilefs. */
struct op_counter_config {
unsigned long enabled;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
new file mode 100644
index 0000000..d36b64d
--- /dev/null
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -0,0 +1,215 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 by Ralf Baechle
+ * Copyright (C) 2005 by MIPS Technologies, Inc.
+ */
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include "op_impl.h"
+
+#define M_PERFCTL_EXL (1UL << 0)
+#define M_PERFCTL_KERNEL (1UL << 1)
+#define M_PERFCTL_SUPERVISOR (1UL << 2)
+#define M_PERFCTL_USER (1UL << 3)
+#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
+#define M_PERFCTL_EVENT(event) ((event) << 5)
+#define M_PERFCTL_WIDE (1UL << 30)
+#define M_PERFCTL_MORE (1UL << 31)
+
+#define M_COUNTER_OVERFLOW (1UL << 31)
+
+struct op_mips_model op_model_mipsxx;
+
+static struct mipsxx_register_config {
+ unsigned int control[4];
+ unsigned int counter[4];
+} reg;
+
+/* Compute all of the registers in preparation for enabling profiling. */
+
+static void mipsxx_reg_setup(struct op_counter_config *ctr)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+ int i;
+
+ /* Compute the performance counter control word. */
+ /* For now count kernel and user mode */
+ for (i = 0; i < counters; i++) {
+ reg.control[i] = 0;
+ reg.counter[i] = 0;
+
+ if (!ctr[i].enabled)
+ continue;
+
+ reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
+ M_PERFCTL_INTERRUPT_ENABLE;
+ if (ctr[i].kernel)
+ reg.control[i] |= M_PERFCTL_KERNEL;
+ if (ctr[i].user)
+ reg.control[i] |= M_PERFCTL_USER;
+ if (ctr[i].exl)
+ reg.control[i] |= M_PERFCTL_EXL;
+ reg.counter[i] = 0x80000000 - ctr[i].count;
+ }
+}
+
+/* Program all of the registers in preparation for enabling profiling. */
+
+static void mipsxx_cpu_setup (void *args)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(0);
+ write_c0_perfcntr3(reg.counter[3]);
+ case 3:
+ write_c0_perfctrl2(0);
+ write_c0_perfcntr2(reg.counter[2]);
+ case 2:
+ write_c0_perfctrl1(0);
+ write_c0_perfcntr1(reg.counter[1]);
+ case 1:
+ write_c0_perfctrl0(0);
+ write_c0_perfcntr0(reg.counter[0]);
+ }
+}
+
+/* Start all counters on current CPU */
+static void mipsxx_cpu_start(void *args)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(reg.control[3]);
+ case 3:
+ write_c0_perfctrl2(reg.control[2]);
+ case 2:
+ write_c0_perfctrl1(reg.control[1]);
+ case 1:
+ write_c0_perfctrl0(reg.control[0]);
+ }
+}
+
+/* Stop all counters on current CPU */
+static void mipsxx_cpu_stop(void *args)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(0);
+ case 3:
+ write_c0_perfctrl2(0);
+ case 2:
+ write_c0_perfctrl1(0);
+ case 1:
+ write_c0_perfctrl0(0);
+ }
+}
+
+static void mipsxx_perfcount_handler(struct pt_regs *regs)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int control;
+ unsigned int counter;
+
+ switch (counters) {
+#define HANDLE_COUNTER(n) \
+ case n + 1: \
+ control = read_c0_perfctrl ## n(); \
+ counter = read_c0_perfcntr ## n(); \
+ if ((control & M_PERFCTL_INTERRUPT_ENABLE) && \
+ (counter & M_COUNTER_OVERFLOW)) { \
+ oprofile_add_sample(regs, n); \
+ write_c0_perfcntr ## n(reg.counter[n]); \
+ }
+ HANDLE_COUNTER(3)
+ HANDLE_COUNTER(2)
+ HANDLE_COUNTER(1)
+ HANDLE_COUNTER(0)
+ }
+}
+
+#define M_CONFIG1_PC (1 << 4)
+
+static inline int n_counters(void)
+{
+ if (!(read_c0_config1() & M_CONFIG1_PC))
+ return 0;
+ if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+ return 1;
+ if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+ return 2;
+ if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+ return 3;
+
+ return 4;
+}
+
+static inline void reset_counters(int counters)
+{
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(0);
+ write_c0_perfcntr3(0);
+ case 3:
+ write_c0_perfctrl2(0);
+ write_c0_perfcntr2(0);
+ case 2:
+ write_c0_perfctrl1(0);
+ write_c0_perfcntr1(0);
+ case 1:
+ write_c0_perfctrl0(0);
+ write_c0_perfcntr0(0);
+ }
+}
+
+static int __init mipsxx_init(void)
+{
+ int counters;
+
+ counters = n_counters();
+ if (counters == 0)
+ return -ENODEV;
+
+ reset_counters(counters);
+
+ op_model_mipsxx.num_counters = counters;
+ switch (current_cpu_data.cputype) {
+ case CPU_24K:
+ op_model_mipsxx.cpu_type = "mips/24K";
+ break;
+
+ default:
+ printk(KERN_ERR "Profiling unsupported for this CPU\n");
+
+ return -ENODEV;
+ }
+
+ perf_irq = mipsxx_perfcount_handler;
+
+ return 0;
+}
+
+static void mipsxx_exit(void)
+{
+ reset_counters(op_model_mipsxx.num_counters);
+
+ perf_irq = null_perf_irq;
+}
+
+struct op_mips_model op_model_mipsxx = {
+ .reg_setup = mipsxx_reg_setup,
+ .cpu_setup = mipsxx_cpu_setup,
+ .init = mipsxx_init,
+ .exit = mipsxx_exit,
+ .cpu_start = mipsxx_cpu_start,
+ .cpu_stop = mipsxx_cpu_stop,
+};
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index bee4779..9b75e41 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2004 by Ralf Baechle
*/
+#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
@@ -114,7 +115,7 @@
return IRQ_HANDLED;
}
-static int rm9000_init(void)
+static int __init rm9000_init(void)
{
return request_irq(rm9000_perfcount_irq, rm9000_perfcount_handler,
0, "Perfcounter", NULL);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 83d81c9..7b74683 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -34,6 +34,7 @@
obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
+obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
@@ -45,11 +46,13 @@
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 2406835..87920b2 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -1,14 +1,37 @@
+/*
+ * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
+
#include <asm/mips-boards/atlasint.h>
-#define INTD ATLASINT_INTD
-#define INTC ATLASINT_INTC
-#define INTB ATLASINT_INTB
+#define PCIA ATLASINT_PCIA
+#define PCIB ATLASINT_PCIB
+#define PCIC ATLASINT_PCIC
+#define PCID ATLASINT_PCID
#define INTA ATLASINT_INTA
-#define SCSI ATLASINT_SCSI
+#define INTB ATLASINT_INTB
#define ETH ATLASINT_ETH
+#define INTC ATLASINT_INTC
+#define SCSI ATLASINT_SCSI
+#define INTD ATLASINT_INTD
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
@@ -27,13 +50,13 @@
{0, 0, 0, 0, 0 }, /* 12: Unused */
{0, 0, 0, 0, 0 }, /* 13: Unused */
{0, 0, 0, 0, 0 }, /* 14: Unused */
- {0, 0, 0, 0, 0 }, /* 15: Unused */
+ {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */
{0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */
{0, 0, 0, 0, 0 }, /* 17: Core */
- {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot 1 */
- {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Ethernet */
- {0, 0, 0, 0, 0 }, /* 20: PCI Slot 3 */
- {0, 0, 0, 0, 0 } /* 21: PCI Slot 4 */
+ {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */
+ {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */
+ {0, 0, 0, 0, 0 }, /* 20: Unused */
+ {0, 0, 0, 0, 0 } /* 21: Unused */
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 39fe2b1..c2f8304 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -26,7 +26,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -34,82 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
-/*
- * Shortcut
- */
-#ifdef CONFIG_SOC_AU1500
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
-#endif
-
-#ifdef CONFIG_SOC_AU1550
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-#endif
-
-#define INTX 0xFF /* not valid */
-
-#ifdef CONFIG_MIPS_DB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MTX1
-static char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-#endif
+extern char irq_tab_alchemy[][5];
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 57e1ca2..909292f 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -21,6 +21,20 @@
extern int cobalt_board_id;
+static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn == PCI_DEVFN(0, 0) &&
+ (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
+
+ dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
+
+ printk(KERN_INFO "Galileo: fixed bridge class\n");
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
+ qube_raq_galileo_early_fixup);
+
static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
{
unsigned short cfgword;
@@ -48,6 +62,9 @@
{
unsigned short galileo_id;
+ if (dev->devfn != PCI_DEVFN(0, 0))
+ return;
+
/* Fix PCI latency-timer and cache-line-size values in Galileo
* host bridge.
*/
@@ -55,6 +72,13 @@
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
/*
+ * The code described by the comment below has been removed
+ * as it causes bus mastering by the Ethernet controllers
+ * to break under any kind of network load. We always set
+ * the retry timeouts to their maximum.
+ *
+ * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
+ *
* On all machines prior to Q2, we had the STOP line disconnected
* from Galileo to VIA on PCI. The new Galileo does not function
* correctly unless we have it connected.
@@ -64,21 +88,43 @@
*/
pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
galileo_id &= 0xff; /* mask off class info */
+
+ printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+
+#if 0
if (galileo_id >= 0x10) {
/* New Galileo, assumes PCI stop line to VIA is connected. */
GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS);
- } else if (galileo_id == 0x1 || galileo_id == 0x2) {
+ } else if (galileo_id == 0x1 || galileo_id == 0x2)
+#endif
+ {
signed int timeo;
/* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
timeo = GALILEO_INL(GT_PCI0_TOR_OFS);
/* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
- GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS);
+ GALILEO_OUTL(
+ (0xff << 16) | /* retry count */
+ (0xff << 8) | /* timeout 1 */
+ 0xff, /* timeout 0 */
+ GT_PCI0_TOR_OFS);
+
+ /* enable PCI retry exceeded interrupt */
+ GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID,
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_fixup);
+static char irq_tab_qube1[] __initdata = {
+ [COBALT_PCICONF_CPU] = 0,
+ [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ,
+ [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
+ [COBALT_PCICONF_VIA] = 0,
+ [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
+ [COBALT_PCICONF_ETH1] = 0
+};
+
static char irq_tab_cobalt[] __initdata = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ,
@@ -99,6 +145,9 @@
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
+ return irq_tab_qube1[slot];
+
if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
return irq_tab_raq2[slot];
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
new file mode 100644
index 0000000..4256b3b
--- /dev/null
+++ b/arch/mips/pci/fixup-pnx8550.c
@@ -0,0 +1,57 @@
+/*
+ * Philips PNX8550 pci fixups.
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddealley.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/int.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern char irq_tab_jbs[][5];
+
+void __init pcibios_fixup_resources(struct pci_dev *dev)
+{
+ /* no need to fixup IO resources */
+}
+
+void __init pcibios_fixup(void)
+{
+ /* nothing to do here */
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return irq_tab_jbs[slot][pin];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
new file mode 100644
index 0000000..f455520
--- /dev/null
+++ b/arch/mips/pci/fixup-tx4938.c
@@ -0,0 +1,92 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct pci_controller tx4938_pci_controller[];
+
+int pci_get_irq(struct pci_dev *dev, int pin)
+{
+ int irq = pin;
+ u8 slot = PCI_SLOT(dev->devfn);
+ struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
+
+ if (controller == &tx4938_pci_controller[1]) {
+ /* TX4938 PCIC1 */
+ switch (slot) {
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
+ return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
+ break;
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
+ return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
+ break;
+ }
+ return 0;
+ }
+
+ /* IRQ rotation */
+ irq--; /* 0-3 */
+ if (dev->bus->parent == NULL &&
+ (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
+ /* PCI CardSlot (IDSEL=A23) */
+ /* PCIA => PCIA (IDSEL=A23) */
+ irq = (irq + 0 + slot) % 4;
+ } else {
+ /* PCI Backplane */
+ irq = (irq + 33 - slot) % 4;
+ }
+ irq++; /* 1-4 */
+
+ switch (irq) {
+ case 1:
+ irq = RBTX4938_IRQ_IOC_PCIA;
+ break;
+ case 2:
+ irq = RBTX4938_IRQ_IOC_PCIB;
+ break;
+ case 3:
+ irq = RBTX4938_IRQ_IOC_PCIC;
+ break;
+ case 4:
+ irq = RBTX4938_IRQ_IOC_PCID;
+ break;
+ }
+ return irq;
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ unsigned char irq = 0;
+
+ irq = pci_get_irq(dev, pin);
+
+ printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
+ dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
+ PCI_FUNC(dev->devfn), irq);
+
+ return irq;
+}
+
+/*
+ * Do platform specific device initialization at pci_enable_device() time
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index c1c91ca..be14201 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -50,11 +50,6 @@
int (*board_pci_idsel)(unsigned int devsel, int assert);
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
- "nop; nop; nop; nop;\t" \
- ".set reorder\n\t")
-
void mod_wired_entry(int entry, unsigned long entrylo0,
unsigned long entrylo1, unsigned long entryhi,
unsigned long pagemask)
@@ -66,16 +61,12 @@
old_ctx = read_c0_entryhi() & 0xff;
old_pagemask = read_c0_pagemask();
write_c0_index(entry);
- BARRIER;
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
write_c0_entrylo1(entrylo1);
- BARRIER;
tlb_write_indexed();
- BARRIER;
write_c0_entryhi(old_ctx);
- BARRIER;
write_c0_pagemask(old_pagemask);
}
@@ -128,9 +119,8 @@
last_entryLo0 = last_entryLo1 = 0xffffffff;
}
- /* Since the Au1xxx doesn't do the idsel timing exactly to spec,
- * many board vendors implement their own off-chip idsel, so call
- * it now. If it doesn't succeed, may as well bail out at this point.
+ /* Allow board vendors to implement their own off-chip idsel.
+ * If it doesn't succeed, may as well bail out at this point.
*/
if (board_pci_idsel) {
if (board_pci_idsel(device, 1) == 0) {
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 4b4e086..dc35270 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -17,7 +19,6 @@
*
* MIPS boards specific PCI support.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -57,13 +58,6 @@
return -1;
}
-#ifdef CONFIG_MIPS_BOARDS_GEN
- if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
- /* MIPS Core boards have Bonito connected as device 17 */
- return -1;
- }
-#endif
-
/* Clear cause register bits */
BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR |
BONITO_PCICMD_MTABORT_CLR);
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
index c5b0fc1..c180793 100644
--- a/arch/mips/pci/ops-gt64111.c
+++ b/arch/mips/pci/ops-gt64111.c
@@ -18,15 +18,15 @@
#include <asm/cobalt/cobalt.h>
/*
- * Accessing device 31 hangs the GT64120. Not sure if this will also hang
- * the GT64111, let's be paranoid for now.
+ * Device 31 on the GT64111 is used to generate PCI special
+ * cycles, so we shouldn't expected to find a device there ...
*/
static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
{
- if (bus->number == 0 && devfn == PCI_DEVFN(31, 0))
- return -1;
+ if (bus->number == 0 && PCI_SLOT(devfn) < 31)
+ return 0;
- return 0;
+ return -1;
}
static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c
index 7b99dfa..6335844 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64120.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -43,10 +45,6 @@
unsigned char busnum = bus->number;
u32 intr;
- if ((busnum == 0) && (PCI_SLOT(devfn) == 0))
- /* Galileo itself is devfn 0, don't move it around */
- return -1;
-
if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0)))
return -1; /* Because of a bug in the galileo (for slot 31). */
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 7bc0996..5d9fbb0 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -21,7 +21,6 @@
* MIPS boards specific PCI support.
*
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -49,34 +48,17 @@
struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
{
unsigned char busnum = bus->number;
- unsigned char type;
u32 intr;
-#ifdef CONFIG_MIPS_BOARDS_GEN
- if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
- /* MIPS Core boards have SOCit connected as device 17 */
- return -1;
- }
-#endif
-
/* Clear status register bits. */
MSC_WRITE(MSC01_PCI_INTSTAT,
(MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
- /* Setup address */
- if (busnum == 0)
- type = 0; /* Type 0 */
- else
- type = 1; /* Type 1 */
-
MSC_WRITE(MSC01_PCI_CFGADDR,
((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) |
- (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF)
- | (PCI_FUNC(devfn) <<
- MSC01_PCI_CFGADDR_FNUM_SHF) | ((where /
- 4) <<
- MSC01_PCI_CFGADDR_RNUM_SHF)
- | (type)));
+ (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) |
+ (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) |
+ ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF)));
/* Perform access */
if (access_type == PCI_ACCESS_WRITE)
@@ -86,15 +68,12 @@
/* Detect Master/Target abort */
MSC_READ(MSC01_PCI_INTSTAT, intr);
- if (intr & (MSC01_PCI_INTCFG_MA_BIT |
- MSC01_PCI_INTCFG_TA_BIT)) {
+ if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) {
/* Error occurred */
/* Clear bits */
- MSC_READ(MSC01_PCI_INTSTAT, intr);
MSC_WRITE(MSC01_PCI_INTSTAT,
- (MSC01_PCI_INTCFG_MA_BIT |
- MSC01_PCI_INTCFG_TA_BIT));
+ (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
return -1;
}
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index a716992..a8d38dc 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -15,7 +15,7 @@
volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-static spinlock_t nile4_pci_lock;
+static DEFINE_SPINLOCK(nile4_pci_lock);
static int nile4_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
new file mode 100644
index 0000000..454b65c
--- /dev/null
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -0,0 +1,284 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ * Based on:
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/glb.h>
+#include <asm/debug.h>
+
+
+static inline void clear_status(void)
+{
+ unsigned long pci_stat;
+
+ pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
+ outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
+}
+
+static inline unsigned int
+calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+ unsigned int addr;
+
+ addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
+ addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
+
+ return addr;
+}
+
+static int
+config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
+{
+ unsigned int flags;
+ unsigned long loops = 0;
+ unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
+
+ local_irq_save(flags);
+ /*Clear pending interrupt status */
+ if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
+ clear_status();
+ while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
+ }
+
+ outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
+
+ if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
+ outl(*val, PCI_BASE | PCI_GPPM_WDAT);
+
+ outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
+ PCI_BASE | PCI_GPPM_CTRL);
+
+ loops =
+ ((loops_per_jiffy *
+ PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
+ while (1) {
+ if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
+ if ((pci_cmd == PCI_CMD_IOR) ||
+ (pci_cmd == PCI_CMD_CONFIG_READ))
+ *val = inl(PCI_BASE | PCI_GPPM_RDAT);
+ clear_status();
+ local_irq_restore(flags);
+ return PCIBIOS_SUCCESSFUL;
+ } else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
+ break;
+ }
+
+ loops--;
+ if (loops == 0) {
+ printk("%s : Arbiter Locked.\n", __FUNCTION__);
+ }
+ }
+
+ clear_status();
+ if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
+ printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
+ __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+ pci_cmd);
+ }
+
+ if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
+ *val = 0xffffffff;
+ local_irq_restore(flags);
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+ unsigned int data = 0;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+ switch (where & 0x03) {
+ case 0:
+ *val = (unsigned char)(data & 0x000000ff);
+ break;
+ case 1:
+ *val = (unsigned char)((data & 0x0000ff00) >> 8);
+ break;
+ case 2:
+ *val = (unsigned char)((data & 0x00ff0000) >> 16);
+ break;
+ case 3:
+ *val = (unsigned char)((data & 0xff000000) >> 24);
+ break;
+ }
+
+ return err;
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+ unsigned int data = 0;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x01)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
+ switch (where & 0x02) {
+ case 0:
+ *val = (unsigned short)(data & 0x0000ffff);
+ break;
+ case 2:
+ *val = (unsigned short)((data & 0xffff0000) >> 16);
+ break;
+ }
+
+ return err;
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+ int err;
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x03)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
+
+ return err;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+ unsigned int data = (unsigned int)val;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ switch (where & 0x03) {
+ case 1:
+ data = (data << 8);
+ break;
+ case 2:
+ data = (data << 16);
+ break;
+ case 3:
+ data = (data << 24);
+ break;
+ default:
+ break;
+ }
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+
+ return err;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+ unsigned int data = (unsigned int)val;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x01)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ switch (where & 0x02) {
+ case 2:
+ data = (data << 16);
+ break;
+ default:
+ break;
+ }
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
+
+ return err;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+ int err;
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x03)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
+
+ return err;
+}
+
+static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+ switch (size) {
+ case 1: {
+ u8 _val;
+ int rc = read_config_byte(bus, devfn, where, &_val);
+ *val = _val;
+ return rc;
+ }
+ case 2: {
+ u16 _val;
+ int rc = read_config_word(bus, devfn, where, &_val);
+ *val = _val;
+ return rc;
+ }
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+struct pci_ops pnx8550_pci_ops = {
+ config_read,
+ config_write
+};
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
new file mode 100644
index 0000000..4c0dcfc
--- /dev/null
+++ b/arch/mips/pci/ops-tx4938.c
@@ -0,0 +1,198 @@
+/*
+ * Define the pci_ops for the Toshiba rbtx4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/* initialize in setup */
+struct resource pci_io_resource = {
+ .name = "pci IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
+};
+
+/* initialize in setup */
+struct resource pci_mem_resource = {
+ .name = "pci memory space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+};
+
+struct resource tx4938_pcic1_pci_io_resource = {
+ .name = "PCI1 IO",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
+};
+struct resource tx4938_pcic1_pci_mem_resource = {
+ .name = "PCI1 mem",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+};
+
+static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+{
+ if (bus > 0) {
+ /* Type 1 configuration */
+ tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+ ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
+ } else {
+ if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
+ return -1;
+
+ /* Type 0 configuration */
+ tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+ ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+ }
+ /* clear M_ABORT and Disable M_ABORT Int. */
+ tx4938_pcicptr->pcistatus =
+ (tx4938_pcicptr->pcistatus & 0x0000ffff) |
+ (PCI_STATUS_REC_MASTER_ABORT << 16);
+ tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+
+ return 0;
+}
+
+static int check_abort(int flags)
+{
+ int code = PCIBIOS_SUCCESSFUL;
+ /* wait write cycle completion before checking error status */
+ while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
+ ;
+ if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+ tx4938_pcicptr->pcistatus =
+ (tx4938_pcicptr->
+ pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
+ << 16);
+ tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+ code = PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ return code;
+}
+
+static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ int flags, retval, dev, busno, func;
+
+ dev = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+
+ /* check if the bus is top-level */
+ if (bus->parent != NULL)
+ busno = bus->number;
+ else {
+ busno = 0;
+ }
+
+ if (mkaddr(busno, devfn, where, &flags))
+ return -1;
+
+ switch (size) {
+ case 1:
+ *val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 3));
+#else
+ (where & 3));
+#endif
+ break;
+ case 2:
+ *val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 2));
+#else
+ (where & 3));
+#endif
+ break;
+ case 4:
+ *val = tx4938_pcicptr->g2pcfgdata;
+ break;
+ }
+
+ retval = check_abort(flags);
+ if (retval == PCIBIOS_DEVICE_NOT_FOUND)
+ *val = 0xffffffff;
+
+ return retval;
+}
+
+static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ int flags, dev, busno, func;
+
+ busno = bus->number;
+ dev = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+
+ /* check if the bus is top-level */
+ if (bus->parent != NULL) {
+ busno = bus->number;
+ } else {
+ busno = 0;
+ }
+
+ if (mkaddr(busno, devfn, where, &flags))
+ return -1;
+
+ switch (size) {
+ case 1:
+ *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 3)) = val;
+#else
+ (where & 3)) = val;
+#endif
+ break;
+ case 2:
+ *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 0x3) ^ 0x2)) = val;
+#else
+ (where & 3)) = val;
+#endif
+ break;
+ case 4:
+ tx4938_pcicptr->g2pcfgdata = val;
+ break;
+ }
+
+ return check_abort(flags);
+}
+
+struct pci_ops tx4938_pci_ops = {
+ tx4938_pcibios_read_config,
+ tx4938_pcibios_write_config
+};
+
+struct pci_controller tx4938_pci_controller[] = {
+ /* h/w only supports devices 0x00 to 0x14 */
+ {
+ .pci_ops = &tx4938_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+ },
+ /* h/w only supports devices 0x00 to 0x14 */
+ {
+ .pci_ops = &tx4938_pci_ops,
+ .io_resource = &tx4938_pcic1_pci_io_resource,
+ .mem_resource = &tx4938_pcic1_pci_mem_resource,
+ }
+};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
new file mode 100644
index 0000000..f194b4e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ else
+ return 1;
+ } else
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480_pci_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480_pci_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+ bcm1480_pcibios_read,
+ bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+ .name = "BCM1480 PCI MEM",
+ .start = 0x30000000UL,
+ .end = 0x3fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+ .name = "BCM1480 PCI I/O",
+ .start = 0x2c000000UL,
+ .end = 0x2dffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+ .pci_ops = &bcm1480_pci_ops,
+ .mem_resource = &bcm1480_mem_resource,
+ .io_resource = &bcm1480_io_resource,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+ uint32_t cmdreg;
+ uint64_t reg;
+ extern int pci_probe_only;
+
+ /* CFE will assign PCI resources */
+ pci_probe_only = 1;
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00008000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ /* Set I/O resource limits. - unlimited for now to accomodate HT */
+ ioport_resource.end = 0xffffffffUL;
+ iomem_resource.end = 0xffffffffUL;
+
+ cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+ bcm1480_bus_status |= PCI_DEVICE_MODE;
+ } else {
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk
+ ("PCI: Skipping PCI probe. Bus is not initialized.\n");
+ iounmap(cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480_bus_status |= PCI_BUS_ENABLED;
+ }
+
+ /* turn on ExpMemEn */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+ WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+ cmdreg | 0x10);
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+
+ /*
+ * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+ * space. Use "match bytes" policy to make everything look
+ * little-endian. So, you need to also set
+ * CONFIG_SWAP_IO_SPACE, but this is the combination that
+ * works correctly with most of Linux's drivers.
+ * XXX ehs: Should this happen in PCI Device mode?
+ */
+
+ set_io_port_base((unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+ isa_slot_offset = (unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
+
+ register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+ take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1);
+#endif
+ return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 0000000..aca4a2e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+#define HT_BRIDGE_DEVICE 1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480ht_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480ht_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+ return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+ .read = bcm1480ht_pcibios_read,
+ .write = bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+ .name = "BCM1480 HT MEM",
+ .start = 0x40000000UL,
+ .end = 0x5fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+ .name = "BCM1480 HT I/O",
+ .start = 0x00000000UL,
+ .end = 0x01ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+ .pci_ops = &bcm1480ht_pci_ops,
+ .mem_resource = &bcm1480ht_mem_resource,
+ .io_resource = &bcm1480ht_io_resource,
+ .index = 1,
+ .get_busno = bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+ uint32_t cmdreg;
+
+ ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk("HT: Skipping HT probe. Bus is not initialized.\n");
+ iounmap(ht_cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+ ht_eoi_space = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+ 4 * 1024 * 1024);
+
+ register_pci_controller(&bcm1480ht_controller);
+
+ return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 068e0e5..efc96ce 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -485,5 +485,12 @@
pci_disable_swapping(d);
}
+int pcibus_to_node(struct pci_bus *bus)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+ return bc->nasid;
+}
+
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 000dc6a..180af89 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -136,7 +136,9 @@
BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
"MACE PCI error", NULL));
- ioport_resource.end = mace_pci_io_resource.end;
+ iomem_resource = mace_pci_mem_resource;
+ ioport_resource = mace_pci_io_resource;
+
register_pci_controller(&mace_pci_controller);
return 0;
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index ae3cc4b..88fb191 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -7,12 +7,8 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
#include <asm/bootinfo.h>
extern struct pci_ops nile4_pci_ops;
@@ -20,14 +16,14 @@
static struct resource lasat_pci_mem_resource = {
.name = "LASAT PCI MEM",
.start = 0x18000000,
- .end = 0x19FFFFFF,
+ .end = 0x19ffffff,
.flags = IORESOURCE_MEM,
};
static struct resource lasat_pci_io_resource = {
.name = "LASAT PCI IO",
.start = 0x1a000000,
- .end = 0x1bFFFFFF,
+ .end = 0x1bffffff,
.flags = IORESOURCE_IO,
};
@@ -38,23 +34,25 @@
static int __init lasat_pci_setup(void)
{
- printk("PCI: starting\n");
+ printk("PCI: starting\n");
- switch (mips_machtype) {
- case MACH_LASAT_100:
+ switch (mips_machtype) {
+ case MACH_LASAT_100:
lasat_pci_controller.pci_ops = >64120_pci_ops;
break;
- case MACH_LASAT_200:
+ case MACH_LASAT_200:
lasat_pci_controller.pci_ops = &nile4_pci_ops;
break;
- default:
+ default:
panic("pcibios_init: mips_machtype incorrect");
}
register_pci_controller(&lasat_pci_controller);
- return 0;
+
+ return 0;
}
-early_initcall(lasat_pci_setup);
+
+arch_initcall(lasat_pci_setup);
#define LASATINT_ETH1 0
#define LASATINT_ETH0 1
@@ -68,24 +66,22 @@
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
- switch (slot) {
- case 1:
- return LASATINT_PCIA; /* Expansion Module 0 */
- case 2:
- return LASATINT_PCIB; /* Expansion Module 1 */
- case 3:
- return LASATINT_PCIC; /* Expansion Module 2 */
- case 4:
- return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */
- case 5:
- return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */
- case 6:
- return LASATINT_HDC; /* IDE controller */
- default:
- return 0xff; /* Illegal */
- }
+ switch (slot) {
+ case 1:
+ case 2:
+ case 3:
+ return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+ case 4:
+ return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */
+ case 5:
+ return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */
+ case 6:
+ return LASATINT_HDC; /* IDE controller */
+ default:
+ return 0xff; /* Illegal */
+ }
- return -1;
+ return -1;
}
/* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a8d499b..21402ff 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
hose->need_domain_info = need_domain_info;
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
}
continue;
@@ -164,7 +169,7 @@
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
/* Only set up the requested stuff */
if (!(mask & (1<<idx)))
continue;
diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig
new file mode 100644
index 0000000..072572d
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Kconfig
@@ -0,0 +1 @@
+# Place holder
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile
new file mode 100644
index 0000000..6e38f3b
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Makefile
@@ -0,0 +1,27 @@
+#
+# Per Hallsmark, per.hallsmark@mvista.com
+#
+# ########################################################################
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# #######################################################################
+#
+# Makefile for the PNX8550 specific kernel interface routines
+# under Linux.
+#
+
+obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += gdb_hook.o
diff --git a/arch/mips/philips/pnx8550/common/gdb_hook.c b/arch/mips/philips/pnx8550/common/gdb_hook.c
new file mode 100644
index 0000000..ad4624f
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/gdb_hook.c
@@ -0,0 +1,109 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * This is the interface to the remote debugger stub.
+ *
+ */
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#include <uart.h>
+
+static struct serial_state rs_table[IP3106_NR_PORTS] = {
+};
+static struct async_struct kdb_port_info = {0};
+
+void rs_kgdb_hook(int tty_no)
+{
+ struct serial_state *ser = &rs_table[tty_no];
+
+ kdb_port_info.state = ser;
+ kdb_port_info.magic = SERIAL_MAGIC;
+ kdb_port_info.port = tty_no;
+ kdb_port_info.flags = ser->flags;
+
+ /*
+ * Clear all interrupts
+ */
+ /* Clear all the transmitter FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
+ /* Clear all the receiver FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
+ /* Clear all interrupts */
+ ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
+ IP3106_UART_INT_ALLTX;
+
+ /*
+ * Now, initialize the UART
+ */
+ ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
+ ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
+}
+
+int putDebugChar(char c)
+{
+ /* Wait until FIFO not full */
+ while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+ ;
+ /* Send one char */
+ ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
+
+ return 1;
+}
+
+char getDebugChar(void)
+{
+ char ch;
+
+ /* Wait until there is a char in the FIFO */
+ while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
+ IP3106_UART_FIFO_RXFIFO) >> 8))
+ ;
+ /* Read one char */
+ ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
+ IP3106_UART_FIFO_RBRTHR;
+ /* Advance the RX FIFO read pointer */
+ ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
+ return (ch);
+}
+
+void rs_disable_debug_interrupts(void)
+{
+ ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
+}
+
+void rs_enable_debug_interrupts(void)
+{
+ /* Clear all the transmitter FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
+ /* Clear all the receiver FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
+ /* Clear all interrupts */
+ ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
+ IP3106_UART_INT_ALLTX;
+ ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
+}
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
new file mode 100644
index 0000000..5461449
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Ported to 2.6.
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+extern asmlinkage void cp0_irqdispatch(void);
+
+static DEFINE_SPINLOCK(irq_lock);
+
+/* default prio for interrupts */
+/* first one is a no-no so therefore always prio 0 (disabled) */
+static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
+ 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69
+ 1 // 70
+};
+
+void hw0_irqdispatch(int irq, struct pt_regs *regs)
+{
+ /* find out which interrupt */
+ irq = PNX8550_GIC_VECTOR_0 >> 3;
+
+ if (irq == 0) {
+ printk("hw0_irqdispatch: irq 0, spurious interrupt?\n");
+ return;
+ }
+ do_IRQ(PNX8550_INT_GIC_MIN + irq, regs);
+}
+
+
+void timer_irqdispatch(int irq, struct pt_regs *regs)
+{
+ irq = (0x01c0 & read_c0_config7()) >> 6;
+
+ if (irq == 0) {
+ printk("timer_irqdispatch: irq 0, spurious interrupt?\n");
+ return;
+ }
+
+ if (irq & 0x1) {
+ do_IRQ(PNX8550_INT_TIMER1, regs);
+ }
+ if (irq & 0x2) {
+ do_IRQ(PNX8550_INT_TIMER2, regs);
+ }
+ if (irq & 0x4) {
+ do_IRQ(PNX8550_INT_TIMER3, regs);
+ }
+}
+
+static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
+{
+ unsigned long status = read_c0_status();
+
+ status &= ~((clr_mask & 0xFF) << 8);
+ status |= (set_mask & 0xFF) << 8;
+
+ write_c0_status(status);
+}
+
+static inline void mask_gic_int(unsigned int irq_nr)
+{
+ /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */
+ PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */
+}
+
+static inline void unmask_gic_int(unsigned int irq_nr)
+{
+ /* set prio mask to lower four bits and enable interrupt */
+ PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr];
+}
+
+static inline void mask_irq(unsigned int irq_nr)
+{
+ if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+ modify_cp0_intmask(1 << irq_nr, 0);
+ } else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_GIC_MAX)) {
+ mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+ } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_TIMER_MAX)) {
+ modify_cp0_intmask(1 << 7, 0);
+ } else {
+ printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+ }
+}
+
+static inline void unmask_irq(unsigned int irq_nr)
+{
+ if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+ modify_cp0_intmask(0, 1 << irq_nr);
+ } else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_GIC_MAX)) {
+ unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+ } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_TIMER_MAX)) {
+ modify_cp0_intmask(0, 1 << 7);
+ } else {
+ printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+ }
+}
+
+#define pnx8550_disable pnx8550_ack
+static void pnx8550_ack(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ mask_irq(irq);
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+#define pnx8550_enable pnx8550_unmask
+static void pnx8550_unmask(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ unmask_irq(irq);
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static unsigned int startup_irq(unsigned int irq_nr)
+{
+ pnx8550_unmask(irq_nr);
+ return 0;
+}
+
+static void shutdown_irq(unsigned int irq_nr)
+{
+ pnx8550_ack(irq_nr);
+ return;
+}
+
+int pnx8550_set_gic_priority(int irq, int priority)
+{
+ int gic_irq = irq-PNX8550_INT_GIC_MIN;
+ int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf;
+
+ gic_prio[gic_irq] = priority;
+ PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]);
+
+ return prev_priority;
+}
+
+static inline void mask_and_ack_level_irq(unsigned int irq)
+{
+ pnx8550_disable(irq);
+ return;
+}
+
+static void end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+ pnx8550_enable(irq);
+ }
+}
+
+static struct hw_interrupt_type level_irq_type = {
+ .typename = "PNX Level IRQ",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = pnx8550_enable,
+ .disable = pnx8550_disable,
+ .ack = mask_and_ack_level_irq,
+ .end = end_irq,
+};
+
+static struct irqaction gic_action = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "GIC",
+};
+
+static struct irqaction timer_action = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "Timer",
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+ int configPR;
+
+ /* init of cp0 interrupts */
+ set_except_vector(0, cp0_irqdispatch);
+
+ for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
+ irq_desc[i].handler = &level_irq_type;
+ pnx8550_ack(i); /* mask the irq just in case */
+ }
+
+ /* init of GIC/IPC interrupts */
+ /* should be done before cp0 since cp0 init enables the GIC int */
+ for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) {
+ int gic_int_line = i - PNX8550_INT_GIC_MIN;
+ if (gic_int_line == 0 )
+ continue; // don't fiddle with int 0
+ /*
+ * enable change of TARGET, ENABLE and ACTIVE_LOW bits
+ * set TARGET 0 to route through hw0 interrupt
+ * set ACTIVE_LOW 0 active high (correct?)
+ *
+ * We really should setup an interrupt description table
+ * to do this nicely.
+ * Note, PCI INTA is active low on the bus, but inverted
+ * in the GIC, so to us it's active high.
+ */
+#ifdef CONFIG_PNX8550_V2PCI
+ if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
+ /* PCI INT through gpio 8, which is setup in
+ * pnx8550_setup.c and routed to GPIO
+ * Interrupt Level 0 (GPIO Connection 58).
+ * Set it active low. */
+
+ PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
+ } else
+#endif
+ {
+ PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
+ }
+
+ /* mask/priority is still 0 so we will not get any
+ * interrupts until it is unmasked */
+
+ irq_desc[i].handler = &level_irq_type;
+ }
+
+ /* Priority level 0 */
+ PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0;
+
+ /* Set int vector table address */
+ PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0;
+
+ irq_desc[MIPS_CPU_GIC_IRQ].handler = &level_irq_type;
+ setup_irq(MIPS_CPU_GIC_IRQ, &gic_action);
+
+ /* init of Timer interrupts */
+ for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) {
+ irq_desc[i].handler = &level_irq_type;
+ }
+
+ /* Stop Timer 1-3 */
+ configPR = read_c0_config7();
+ configPR |= 0x00000038;
+ write_c0_config7(configPR);
+
+ irq_desc[MIPS_CPU_TIMER_IRQ].handler = &level_irq_type;
+ setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action);
+}
+
+EXPORT_SYMBOL(pnx8550_set_gic_priority);
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S
new file mode 100644
index 0000000..338bffd
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/mipsIRQ.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2002 Philips, Inc. All rights.
+ * Copyright (c) 2002 Red Hat, Inc. All rights.
+ *
+ * This software may be freely redistributed under the terms of the
+ * GNU General Public License.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
+ *
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * cp0_irqdispatch
+ *
+ * Code to handle in-core interrupt exception.
+ */
+
+ .align 5
+ .set reorder
+ .set noat
+ NESTED(cp0_irqdispatch, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 t0,CP0_CAUSE
+ mfc0 t2,CP0_STATUS
+
+ and t0,t2
+
+ andi t1,t0,STATUSF_IP2 /* int0 hardware line */
+ bnez t1,ll_hw0_irq
+ nop
+
+ andi t1,t0,STATUSF_IP7 /* int5 hardware line */
+ bnez t1,ll_timer_irq
+ nop
+
+ /* wrong alarm or masked ... */
+
+ j spurious_interrupt
+ nop
+ END(cp0_irqdispatch)
+
+ .align 5
+ .set reorder
+ll_hw0_irq:
+ li a0,2
+ move a1,sp
+ jal hw0_irqdispatch
+ nop
+ j ret_from_irq
+ nop
+
+ .align 5
+ .set reorder
+ll_timer_irq:
+ mfc0 t3,CP0_CONFIG,7
+ andi t4,t3,0x01c0
+ beqz t4,ll_timer_out
+ nop
+ li a0,7
+ move a1,sp
+ jal timer_irqdispatch
+ nop
+
+ll_timer_out: j ret_from_irq
+ nop
diff --git a/arch/mips/philips/pnx8550/common/pci.c b/arch/mips/philips/pnx8550/common/pci.c
new file mode 100644
index 0000000..baa6905
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/pci.c
@@ -0,0 +1,133 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <pci.h>
+#include <glb.h>
+#include <nand.h>
+
+static struct resource pci_io_resource = {
+ "pci IO space",
+ (u32)(PNX8550_PCIIO + 0x1000), /* reserve regacy I/O space */
+ (u32)(PNX8550_PCIIO + PNX8550_PCIIO_SIZE),
+ IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ "pci memory space",
+ (u32)(PNX8550_PCIMEM),
+ (u32)(PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1),
+ IORESOURCE_MEM
+};
+
+extern struct pci_ops pnx8550_pci_ops;
+
+static struct pci_controller pnx8550_controller = {
+ .pci_ops = &pnx8550_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+};
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+static inline unsigned long get_system_mem_size(void)
+{
+ /* Read IP2031_RANK0_ADDR_LO */
+ unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+ /* Read IP2031_RANK1_ADDR_HI */
+ unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+ return dram_r1_hi - dram_r0_lo + 1;
+}
+
+static int __init pnx8550_pci_setup(void)
+{
+ int pci_mem_code;
+ int mem_size = get_system_mem_size() >> 20;
+
+ /* Clear the Global 2 Register, PCI Inta Output Enable Registers
+ Bit 1:Enable DAC Powerdown
+ -> 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+ Bit 0:Enable of PCI inta output
+ -> 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+ */
+ PNX8550_GLB2_ENAB_INTA_O = 0;
+
+ /* Calc the PCI mem size code */
+ if (mem_size >= 128)
+ pci_mem_code = SIZE_128M;
+ else if (mem_size >= 64)
+ pci_mem_code = SIZE_64M;
+ else if (mem_size >= 32)
+ pci_mem_code = SIZE_32M;
+ else
+ pci_mem_code = SIZE_16M;
+
+ /* Set PCI_XIO registers */
+ outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
+ outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
+ outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
+ outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
+
+ /* Send memory transaction via PCI_BASE2 */
+ outl(0x00000001, PCI_BASE | PCI_IO);
+
+ /* Unlock the setup register */
+ outl(0xca, PCI_BASE | PCI_UNLOCKREG);
+
+ /*
+ * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
+ * to work, and in order for bus_to_baddr to work without any
+ * hacks.
+ */
+ outl(0x00000000, PCI_BASE | PCI_BASE10);
+
+ /*
+ *These two bars are set by default or the boot code.
+ * However, it's safer to set them here so we're not boot
+ * code dependent.
+ */
+ outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
+ outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
+
+ outl(PCI_EN_TA |
+ PCI_EN_PCI2MMI |
+ PCI_EN_XIO |
+ PCI_SETUP_BASE18_SIZE(SIZE_32M) |
+ PCI_SETUP_BASE18_EN |
+ PCI_SETUP_BASE14_EN |
+ PCI_SETUP_BASE10_PREF |
+ PCI_SETUP_BASE10_SIZE(pci_mem_code) |
+ PCI_SETUP_CFGMANAGE_EN |
+ PCI_SETUP_PCIARB_EN,
+ PCI_BASE |
+ PCI_SETUP); /* PCI_SETUP */
+ outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
+
+ register_pci_controller(&pnx8550_controller);
+
+ return 0;
+}
+
+arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
new file mode 100644
index 0000000..8aa9bd6
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -0,0 +1,135 @@
+/*
+ * Platform device support for Philips PNX8550 SoCs
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * Based on arch/mips/au1000/common/platform.c
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_ip3106.h>
+
+#include <int.h>
+#include <usb.h>
+#include <uart.h>
+
+extern struct uart_ops ip3106_pops;
+
+static struct resource pnx8550_usb_ohci_resources[] = {
+ [0] = {
+ .start = PNX8550_USB_OHCI_OP_BASE,
+ .end = PNX8550_USB_OHCI_OP_BASE +
+ PNX8550_USB_OHCI_OP_LEN,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX8550_INT_USB,
+ .end = PNX8550_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource pnx8550_uart_resources[] = {
+ [0] = {
+ .start = PNX8550_UART_PORT0,
+ .end = PNX8550_UART_PORT0 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX8550_UART_INT(0),
+ .end = PNX8550_UART_INT(0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = PNX8550_UART_PORT1,
+ .end = PNX8550_UART_PORT1 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = PNX8550_UART_INT(1),
+ .end = PNX8550_UART_INT(1),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct ip3106_port ip3106_ports[] = {
+ [0] = {
+ .port = {
+ .type = PORT_IP3106,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void __iomem *)PNX8550_UART_PORT0,
+ .mapbase = PNX8550_UART_PORT0,
+ .irq = PNX8550_UART_INT(0),
+ .uartclk = 3692300,
+ .fifosize = 16,
+ .ops = &ip3106_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ },
+ [1] = {
+ .port = {
+ .type = PORT_IP3106,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void __iomem *)PNX8550_UART_PORT1,
+ .mapbase = PNX8550_UART_PORT1,
+ .irq = PNX8550_UART_INT(1),
+ .uartclk = 3692300,
+ .fifosize = 16,
+ .ops = &ip3106_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ },
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static u64 uart_dmamask = ~(u32)0;
+
+static struct platform_device pnx8550_usb_ohci_device = {
+ .name = "pnx8550-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources),
+ .resource = pnx8550_usb_ohci_resources,
+};
+
+static struct platform_device pnx8550_uart_device = {
+ .name = "ip3106-uart",
+ .id = -1,
+ .dev = {
+ .dma_mask = &uart_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ip3106_ports,
+ },
+ .num_resources = ARRAY_SIZE(pnx8550_uart_resources),
+ .resource = pnx8550_uart_resources,
+};
+
+static struct platform_device *pnx8550_platform_devices[] __initdata = {
+ &pnx8550_usb_ohci_device,
+ &pnx8550_uart_device,
+};
+
+int pnx8550_platform_init(void)
+{
+ return platform_add_devices(pnx8550_platform_devices,
+ ARRAY_SIZE(pnx8550_platform_devices));
+}
+
+arch_initcall(pnx8550_platform_init);
diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c
new file mode 100644
index 0000000..72a0167
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/proc.c
@@ -0,0 +1,113 @@
+/*
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+
+static int pnx8550_timers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+ int len = 0;
+ int configPR = read_c0_config7();
+
+ if (offset==0) {
+ len += sprintf(&page[len],"Timer: count, compare, tc, status\n");
+ len += sprintf(&page[len]," 1: %11i, %8i, %1i, %s\n",
+ read_c0_count(), read_c0_compare(),
+ (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on");
+ len += sprintf(&page[len]," 2: %11i, %8i, %1i, %s\n",
+ read_c0_count2(), read_c0_compare2(),
+ (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on");
+ len += sprintf(&page[len]," 3: %11i, %8i, %1i, %s\n",
+ read_c0_count3(), read_c0_compare3(),
+ (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on");
+ }
+
+ return len;
+}
+
+static int pnx8550_registers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+ int len = 0;
+
+ if (offset==0) {
+ len += sprintf(&page[len],"config1: %#10.8x\n",read_c0_config1());
+ len += sprintf(&page[len],"config2: %#10.8x\n",read_c0_config2());
+ len += sprintf(&page[len],"config3: %#10.8x\n",read_c0_config3());
+ len += sprintf(&page[len],"configPR: %#10.8x\n",read_c0_config7());
+ len += sprintf(&page[len],"status: %#10.8x\n",read_c0_status());
+ len += sprintf(&page[len],"cause: %#10.8x\n",read_c0_cause());
+ len += sprintf(&page[len],"count: %#10.8x\n",read_c0_count());
+ len += sprintf(&page[len],"count_2: %#10.8x\n",read_c0_count2());
+ len += sprintf(&page[len],"count_3: %#10.8x\n",read_c0_count3());
+ len += sprintf(&page[len],"compare: %#10.8x\n",read_c0_compare());
+ len += sprintf(&page[len],"compare_2: %#10.8x\n",read_c0_compare2());
+ len += sprintf(&page[len],"compare_3: %#10.8x\n",read_c0_compare3());
+ }
+
+ return len;
+}
+
+static struct proc_dir_entry* pnx8550_dir = NULL;
+static struct proc_dir_entry* pnx8550_timers = NULL;
+static struct proc_dir_entry* pnx8550_registers = NULL;
+
+static int pnx8550_proc_init( void )
+{
+
+ // Create /proc/pnx8550
+ pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL);
+ if (pnx8550_dir){
+ pnx8550_dir->nlink = 1;
+ }
+ else {
+ printk(KERN_ERR "Can't create pnx8550 proc dir\n");
+ return -1;
+ }
+
+ // Create /proc/pnx8550/timers
+ pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir );
+ if (pnx8550_timers){
+ pnx8550_timers->nlink = 1;
+ pnx8550_timers->read_proc = pnx8550_timers_read;
+ }
+ else {
+ printk(KERN_ERR "Can't create pnx8550 timers proc file\n");
+ }
+
+ // Create /proc/pnx8550/registers
+ pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir );
+ if (pnx8550_registers){
+ pnx8550_registers->nlink = 1;
+ pnx8550_registers->read_proc = pnx8550_registers_read;
+ }
+ else {
+ printk(KERN_ERR "Can't create pnx8550 registers proc file\n");
+ }
+
+ return 0;
+}
+
+__initcall(pnx8550_proc_init);
diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c
new file mode 100644
index 0000000..70aac97
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/prom.c
@@ -0,0 +1,138 @@
+/*
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * Based on jmr3927/common/prom.c
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/bootinfo.h>
+#include <uart.h>
+
+/* #define DEBUG_CMDLINE */
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+ char *name;
+/* char *val; */
+}t_env_var;
+
+
+char * prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+void prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while(actr < prom_argc) {
+ strcpy(cp, prom_argv[actr]);
+ cp += strlen(prom_argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+}
+
+char *prom_getenv(char *envname)
+{
+ /*
+ * Return a pointer to the given environment variable.
+ * Environment variables are stored in the form of "memsize=64".
+ */
+
+ t_env_var *env = (t_env_var *)prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while(env->name) {
+ if(strncmp(envname, env->name, i) == 0) {
+ return(env->name + strlen(envname) + 1);
+ }
+ env++;
+ }
+ return(NULL);
+}
+
+inline unsigned char str2hexnum(unsigned char c)
+{
+ if(c >= '0' && c <= '9')
+ return c - '0';
+ if(c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ if(c >= 'A' && c <= 'F')
+ return c - 'A' + 10;
+ return 0; /* foo */
+}
+
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+ int i;
+
+ for(i = 0; i < 6; i++) {
+ unsigned char num;
+
+ if((*str == '.') || (*str == ':'))
+ str++;
+ num = str2hexnum(*str++) << 4;
+ num |= (str2hexnum(*str++));
+ ea[i] = num;
+ }
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+ char *ethaddr_str;
+
+ ethaddr_str = prom_getenv("ethaddr");
+ if (!ethaddr_str) {
+ printk("ethaddr not set in boot prom\n");
+ return -1;
+ }
+ str2eaddr(ethernet_addr, ethaddr_str);
+ return 0;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
+
+extern int pnx8550_console_port;
+
+/* used by prom_printf */
+void prom_putchar(char c)
+{
+ if (pnx8550_console_port != -1) {
+ /* Wait until FIFO not full */
+ while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+ ;
+ /* Send one char */
+ ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
+ }
+}
+
+EXPORT_SYMBOL(prom_getcmdline);
+EXPORT_SYMBOL(get_ethernet_addr);
+EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/philips/pnx8550/common/reset.c b/arch/mips/philips/pnx8550/common/reset.c
new file mode 100644
index 0000000..7b2cbc5
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/reset.c
@@ -0,0 +1,49 @@
+/*.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the PNX8550 board.
+ *
+ */
+#include <linux/slab.h>
+#include <asm/reboot.h>
+#include <glb.h>
+
+void pnx8550_machine_restart(char *command)
+{
+ char head[] = "************* Machine restart *************";
+ char foot[] = "*******************************************";
+
+ printk("\n\n");
+ printk("%s\n", head);
+ if (command != NULL)
+ printk("* %s\n", command);
+ printk("%s\n", foot);
+
+ PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
+}
+
+void pnx8550_machine_halt(void)
+{
+ printk("*** Machine halt. (Not implemented) ***\n");
+}
+
+void pnx8550_machine_power_off(void)
+{
+ printk("*** Machine power off. (Not implemented) ***\n");
+}
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
new file mode 100644
index 0000000..ee6bf72
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -0,0 +1,149 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ * Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void prom_printf(char *fmt, ...);
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern void (*board_time_init)(void);
+extern void pnx8550_time_init(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void pnx8550_timer_setup(struct irqaction *irq);
+extern void rs_kgdb_hook(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+ {"dma1", 0x00, 0x1f, IORESOURCE_BUSY},
+ {"timer", 0x40, 0x5f, IORESOURCE_BUSY},
+ {"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY},
+ {"dma2", 0xc0, 0xdf, IORESOURCE_BUSY},
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+ /* Read IP2031_RANK0_ADDR_LO */
+ unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+ /* Read IP2031_RANK1_ADDR_HI */
+ unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+ return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_setup(void)
+{
+ int i;
+ char* argptr;
+
+ board_setup(); /* board specific setup */
+
+ _machine_restart = pnx8550_machine_restart;
+ _machine_halt = pnx8550_machine_halt;
+ _machine_power_off = pnx8550_machine_power_off;
+
+ board_time_init = pnx8550_time_init;
+ board_timer_setup = pnx8550_timer_setup;
+
+ /* Clear the Global 2 Register, PCI Inta Output Enable Registers
+ Bit 1:Enable DAC Powerdown
+ -> 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+ Bit 0:Enable of PCI inta output
+ -> 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+ */
+ PNX8550_GLB2_ENAB_INTA_O = 0;
+
+ /* IO/MEM resources. */
+ set_io_port_base(KSEG1);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+ iomem_resource.start = 0;
+ iomem_resource.end = ~0;
+
+ /* Request I/O space for devices on this board */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources + i);
+
+ /* Place the Mode Control bit for GPIO pin 16 in primary function */
+ /* Pin 16 is used by UART1, UA1_TX */
+ outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+ (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+ PNX8550_GPIO_MC1);
+
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+ argptr += strlen("console=ttyS");
+ pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+ /* We must initialize the UART (console) before prom_printf */
+ /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
+ ip3106_lcr(UART_BASE, pnx8550_console_port) =
+ IP3106_UART_LCR_8BIT;
+ ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+ }
+
+#ifdef CONFIG_KGDB
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
+ int line;
+ argptr += strlen("kgdb=ttyS");
+ line = *argptr == '0' ? 0 : 1;
+ rs_kgdb_hook(line);
+ prom_printf("KGDB: Using ttyS%i for session, "
+ "please connect your debugger\n", line ? 1 : 0);
+ }
+#endif
+ return;
+}
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
new file mode 100644
index 0000000..70664ea
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2001, 2002, 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Common time service routines for MIPS machines. See
+ * Documents/MIPS/README.txt.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/debug.h>
+
+#include <int.h>
+#include <cm.h>
+
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * pnx8550_time_init() - it does the following things:
+ *
+ * 1) board_time_init() -
+ * a) (optional) set up RTC routines,
+ * b) (optional) calibrate and set the mips_hpt_frequency
+ * (only needed if you intended to use fixed_rate_gettimeoffset
+ * or use cpu counter as timer interrupt source)
+ */
+
+void pnx8550_time_init(void)
+{
+ unsigned int n;
+ unsigned int m;
+ unsigned int p;
+ unsigned int pow2p;
+
+ /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
+ /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */
+
+ n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
+ m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
+ p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
+ pow2p = (1 << p);
+
+ db_assert(m != 0 && pow2p != 0);
+
+ /*
+ * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
+ * (a.k.a. 8-10). Divide by HZ for a timer offset that results in
+ * HZ timer interrupts per second.
+ */
+ mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+}
+
+/*
+ * pnx8550_timer_setup() - it does the following things:
+ *
+ * 5) board_timer_setup() -
+ * a) (optional) over-write any choices made above by time_init().
+ * b) machine specific code should setup the timer irqaction.
+ * c) enable the timer interrupt
+ */
+
+void __init pnx8550_timer_setup(struct irqaction *irq)
+{
+ int configPR;
+
+ setup_irq(PNX8550_INT_TIMER1, irq);
+
+ /* Start timer1 */
+ configPR = read_c0_config7();
+ configPR &= ~0x00000008;
+ write_c0_config7(configPR);
+
+ /* Timer 2 stop */
+ configPR = read_c0_config7();
+ configPR |= 0x00000010;
+ write_c0_config7(configPR);
+
+ write_c0_count2(0);
+ write_c0_compare2(0xffffffff);
+
+ /* Timer 3 stop */
+ configPR = read_c0_config7();
+ configPR |= 0x00000020;
+ write_c0_config7(configPR);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/Makefile b/arch/mips/philips/pnx8550/jbs/Makefile
new file mode 100644
index 0000000..e8228db
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the Philips JBS Board.
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c
new file mode 100644
index 0000000..f92826e
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/board_setup.c
@@ -0,0 +1,65 @@
+/*
+ * JBS Specific board startup routines.
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+
+#include <glb.h>
+
+/* CP0 hazard avoidance. */
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+void __init board_setup(void)
+{
+ unsigned long config0, configpr;
+
+ config0 = read_c0_config();
+
+ /* clear all three cache coherency fields */
+ config0 &= ~(0x7 | (7<<25) | (7<<28));
+ config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
+ (CONF_CM_DEFAULT<<28));
+ write_c0_config(config0);
+ BARRIER;
+
+ configpr = read_c0_config7();
+ configpr |= (1<<19); /* enable tlb */
+ write_c0_config7(configpr);
+ BARRIER;
+}
diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c
new file mode 100644
index 0000000..85f4491
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/init.c
@@ -0,0 +1,57 @@
+/*
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddedalley.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "Philips PNX8550/JBS";
+}
+
+void __init prom_init(void)
+{
+
+ unsigned long memsize;
+
+ mips_machgroup = MACH_GROUP_PHILIPS;
+ mips_machtype = MACH_PHILIPS_JBS;
+
+ //memsize = 0x02800000; /* Trimedia uses memory above */
+ memsize = 0x08000000; /* Trimedia uses memory above */
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/irqmap.c b/arch/mips/philips/pnx8550/jbs/irqmap.c
new file mode 100644
index 0000000..f78e042
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/irqmap.c
@@ -0,0 +1,36 @@
+/*
+ * Philips JBS board irqmap.
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddealley.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <int.h>
+
+char irq_tab_jbs[][5] __initdata = {
+ [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+};
+
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
new file mode 100644
index 0000000..24d514c
--- /dev/null
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -0,0 +1,3 @@
+config HYPERTRANSPORT
+ bool "Hypertransport Support for PMC-Sierra Yosemite"
+ depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index c19f01a..a312883 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -34,7 +34,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <asm/pci.h>
#include <asm/io.h>
#include <linux/init.h>
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index d22c9ff..5aec405 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -26,7 +26,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <asm/pci.h>
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index dad228d..54b65a8 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -28,7 +28,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <asm/pci.h>
#include <asm/io.h>
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 1fb3e69..555bfacf 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -132,8 +132,9 @@
prom_grab_secondary();
}
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
{
+ return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 7225bbf..bdc2ab5 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -212,7 +212,7 @@
py_rtc_setup();
}
-static int __init pmc_yosemite_setup(void)
+void __init plat_setup(void)
{
board_time_init = yosemite_time_init;
late_time_init = py_late_time_init;
@@ -228,8 +228,4 @@
OCD_WRITE(RM9000x2_OCD_HTBAR0, HYPERTRANSPORT_BAR0_ADDR);
OCD_WRITE(RM9000x2_OCD_HTMASK0, HYPERTRANSPORT_SIZE0);
#endif
-
- return 0;
}
-
-early_initcall(pmc_yosemite_setup);
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 1d3b073..0527170 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -9,7 +9,7 @@
#define LAUNCHSTACK_SIZE 256
-static spinlock_t launch_lock __initdata;
+static __initdata DEFINE_SPINLOCK(launch_lock);
static unsigned long secondary_sp __initdata;
static unsigned long secondary_gp __initdata;
diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c
index 1a80eee..022eb1a 100644
--- a/arch/mips/qemu/q-setup.c
+++ b/arch/mips/qemu/q-setup.c
@@ -4,6 +4,11 @@
#define QEMU_PORT_BASE 0xb4000000
+const char *get_system_type(void)
+{
+ return "Qemu";
+}
+
static void __init qemu_timer_setup(struct irqaction *irq)
{
/* set the clock to 100 Hz */
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index fa0e719..b198201 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -29,6 +29,7 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
@@ -37,42 +38,29 @@
#include <asm/sgi/mc.h>
#include <asm/sgi/ip22.h>
-#define EISA_MAX_SLOTS 4
+/* I2 has four EISA slots. */
+#define IP22_EISA_MAX_SLOTS 4
#define EISA_MAX_IRQ 16
-#define EISA_TO_PHYS(x) (0x00080000 | (x))
-#define EISA_TO_KSEG1(x) ((void *) KSEG1ADDR(EISA_TO_PHYS((x))))
+#define EIU_MODE_REG 0x0001ffc0
+#define EIU_STAT_REG 0x0001ffc4
+#define EIU_PREMPT_REG 0x0001ffc8
+#define EIU_QUIET_REG 0x0001ffcc
+#define EIU_INTRPT_ACK 0x00010004
-#define EIU_MODE_REG 0x0009ffc0
-#define EIU_STAT_REG 0x0009ffc4
-#define EIU_PREMPT_REG 0x0009ffc8
-#define EIU_QUIET_REG 0x0009ffcc
-#define EIU_INTRPT_ACK 0x00090004
-
-#define EISA_DMA1_STATUS 8
-#define EISA_INT1_CTRL 0x20
-#define EISA_INT1_MASK 0x21
-#define EISA_INT2_CTRL 0xA0
-#define EISA_INT2_MASK 0xA1
-#define EISA_DMA2_STATUS 0xD0
-#define EISA_DMA2_WRITE_SINGLE 0xD4
-#define EISA_EXT_NMI_RESET_CTRL 0x461
-#define EISA_INT1_EDGE_LEVEL 0x4D0
-#define EISA_INT2_EDGE_LEVEL 0x4D1
-#define EISA_VENDOR_ID_OFFSET 0xC80
-
-#define EIU_WRITE_32(x,y) { *((u32 *) KSEG1ADDR(x)) = (u32) (y); mb(); }
-#define EIU_READ_8(x) *((u8 *) KSEG1ADDR(x))
-#define EISA_WRITE_8(x,y) { *((u8 *) EISA_TO_KSEG1(x)) = (u8) (y); mb(); }
-#define EISA_READ_8(x) *((u8 *) EISA_TO_KSEG1(x))
-
-static char *decode_eisa_sig(u8 * sig)
+static char __init *decode_eisa_sig(unsigned long addr)
{
- static char sig_str[8];
- u16 rev;
+ static char sig_str[EISA_SIG_LEN];
+ u8 sig[4];
+ u16 rev;
+ int i;
- if (sig[0] & 0x80)
- return NULL;
+ for (i = 0; i < 4; i++) {
+ sig[i] = inb (addr + i);
+
+ if (!i && (sig[0] & 0x80))
+ return NULL;
+ }
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
@@ -83,23 +71,26 @@
return sig_str;
}
-static void ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
{
u8 eisa_irq;
u8 dma1, dma2;
- eisa_irq = EIU_READ_8(EIU_INTRPT_ACK);
- dma1 = EISA_READ_8(EISA_DMA1_STATUS);
- dma2 = EISA_READ_8(EISA_DMA2_STATUS);
+ eisa_irq = inb(EIU_INTRPT_ACK);
+ dma1 = inb(EISA_DMA1_STATUS);
+ dma2 = inb(EISA_DMA2_STATUS);
- if (eisa_irq >= EISA_MAX_IRQ) {
- /* Oops, Bad Stuff Happened... */
- printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
-
- EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
- } else
+ if (eisa_irq < EISA_MAX_IRQ) {
do_IRQ(eisa_irq, regs);
+ return IRQ_HANDLED;
+ }
+
+ /* Oops, Bad Stuff Happened... */
+ printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+
+ outb(0x20, EISA_INT2_CTRL);
+ outb(0x20, EISA_INT1_CTRL);
+ return IRQ_NONE;
}
static void enable_eisa1_irq(unsigned int irq)
@@ -109,9 +100,9 @@
local_irq_save(flags);
- mask = EISA_READ_8(EISA_INT1_MASK);
+ mask = inb(EISA_INT1_MASK);
mask &= ~((u8) (1 << irq));
- EISA_WRITE_8(EISA_INT1_MASK, mask);
+ outb(mask, EISA_INT1_MASK);
local_irq_restore(flags);
}
@@ -122,9 +113,9 @@
/* Only use edge interrupts for EISA */
- edge = EISA_READ_8(EISA_INT1_EDGE_LEVEL);
+ edge = inb(EISA_INT1_EDGE_LEVEL);
edge &= ~((u8) (1 << irq));
- EISA_WRITE_8(EISA_INT1_EDGE_LEVEL, edge);
+ outb(edge, EISA_INT1_EDGE_LEVEL);
enable_eisa1_irq(irq);
return 0;
@@ -134,9 +125,9 @@
{
u8 mask;
- mask = EISA_READ_8(EISA_INT1_MASK);
+ mask = inb(EISA_INT1_MASK);
mask |= ((u8) (1 << irq));
- EISA_WRITE_8(EISA_INT1_MASK, mask);
+ outb(mask, EISA_INT1_MASK);
}
#define shutdown_eisa1_irq disable_eisa1_irq
@@ -145,7 +136,7 @@
{
disable_eisa1_irq(irq);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+ outb(0x20, EISA_INT1_CTRL);
}
static void end_eisa1_irq(unsigned int irq)
@@ -171,9 +162,9 @@
local_irq_save(flags);
- mask = EISA_READ_8(EISA_INT2_MASK);
+ mask = inb(EISA_INT2_MASK);
mask &= ~((u8) (1 << (irq - 8)));
- EISA_WRITE_8(EISA_INT2_MASK, mask);
+ outb(mask, EISA_INT2_MASK);
local_irq_restore(flags);
}
@@ -184,9 +175,9 @@
/* Only use edge interrupts for EISA */
- edge = EISA_READ_8(EISA_INT2_EDGE_LEVEL);
+ edge = inb(EISA_INT2_EDGE_LEVEL);
edge &= ~((u8) (1 << (irq - 8)));
- EISA_WRITE_8(EISA_INT2_EDGE_LEVEL, edge);
+ outb(edge, EISA_INT2_EDGE_LEVEL);
enable_eisa2_irq(irq);
return 0;
@@ -196,9 +187,9 @@
{
u8 mask;
- mask = EISA_READ_8(EISA_INT2_MASK);
+ mask = inb(EISA_INT2_MASK);
mask |= ((u8) (1 << (irq - 8)));
- EISA_WRITE_8(EISA_INT2_MASK, mask);
+ outb(mask, EISA_INT2_MASK);
}
#define shutdown_eisa2_irq disable_eisa2_irq
@@ -207,8 +198,7 @@
{
disable_eisa2_irq(irq);
- EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+ outb(0x20, EISA_INT2_CTRL);
}
static void end_eisa2_irq(unsigned int irq)
@@ -241,7 +231,6 @@
{
int i, c;
char *str;
- u8 *slot_addr;
if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
printk(KERN_INFO "EISA: bus not present.\n");
@@ -249,11 +238,8 @@
}
printk(KERN_INFO "EISA: Probing bus...\n");
- for (c = 0, i = 1; i <= EISA_MAX_SLOTS; i++) {
- slot_addr =
- (u8 *) EISA_TO_KSEG1((0x1000 * i) +
- EISA_VENDOR_ID_OFFSET);
- if ((str = decode_eisa_sig(slot_addr))) {
+ for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) {
+ if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) {
printk(KERN_INFO "EISA: slot %d : %s detected.\n",
i, str);
c++;
@@ -268,25 +254,25 @@
Please wave your favorite dead chicken over the busses */
/* First say hello to the EIU */
- EIU_WRITE_32(EIU_PREMPT_REG, 0x0000FFFF);
- EIU_WRITE_32(EIU_QUIET_REG, 1);
- EIU_WRITE_32(EIU_MODE_REG, 0x40f3c07F);
+ outl(0x0000FFFF, EIU_PREMPT_REG);
+ outl(1, EIU_QUIET_REG);
+ outl(0x40f3c07F, EIU_MODE_REG);
/* Now be nice to the EISA chipset */
- EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 1);
- for (i = 0; i < 10000; i++); /* Wait long enough for the dust to settle */
- EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 0);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x11);
- EISA_WRITE_8(EISA_INT2_CTRL, 0x11);
- EISA_WRITE_8(EISA_INT1_MASK, 0);
- EISA_WRITE_8(EISA_INT2_MASK, 8);
- EISA_WRITE_8(EISA_INT1_MASK, 4);
- EISA_WRITE_8(EISA_INT2_MASK, 2);
- EISA_WRITE_8(EISA_INT1_MASK, 1);
- EISA_WRITE_8(EISA_INT2_MASK, 1);
- EISA_WRITE_8(EISA_INT1_MASK, 0xfb);
- EISA_WRITE_8(EISA_INT2_MASK, 0xff);
- EISA_WRITE_8(EISA_DMA2_WRITE_SINGLE, 0);
+ outb(1, EISA_EXT_NMI_RESET_CTRL);
+ udelay(50); /* Wait long enough for the dust to settle */
+ outb(0, EISA_EXT_NMI_RESET_CTRL);
+ outb(0x11, EISA_INT1_CTRL);
+ outb(0x11, EISA_INT2_CTRL);
+ outb(0, EISA_INT1_MASK);
+ outb(8, EISA_INT2_MASK);
+ outb(4, EISA_INT1_MASK);
+ outb(2, EISA_INT2_MASK);
+ outb(1, EISA_INT1_MASK);
+ outb(1, EISA_INT2_MASK);
+ outb(0xfb, EISA_INT1_MASK);
+ outb(0xff, EISA_INT2_MASK);
+ outb(0, EISA_DMA2_WRITE_SINGLE);
for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
irq_desc[i].status = IRQ_DISABLED;
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 0e96a5d..5e59b4c 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -53,7 +53,7 @@
extern void ip22_be_init(void) __init;
extern void ip22_time_init(void) __init;
-static int __init ip22_setup(void)
+void __init plat_setup(void)
{
char *ctype;
@@ -137,8 +137,4 @@
}
}
#endif
-
- return 0;
}
-
-early_initcall(ip22_setup);
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
new file mode 100644
index 0000000..7b0bc44
--- /dev/null
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -0,0 +1,54 @@
+#config SGI_SN0_XXL
+# bool "IP27 XXL"
+# depends on SGI_IP27
+# This options adds support for userspace processes upto 16TB size.
+# Normally the limit is just .5TB.
+
+config SGI_SN0_N_MODE
+ bool "IP27 N-Mode"
+ depends on SGI_IP27
+ help
+ The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
+ configured in either N-Modes which allows for more nodes or M-Mode
+ which allows for more memory. Your system is most probably
+ running in M-Mode, so you should say N here.
+
+config ARCH_DISCONTIGMEM_ENABLE
+ bool
+ default y if SGI_IP27
+ help
+ Say Y to upport efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config NUMA
+ bool "NUMA Support"
+ depends on SGI_IP27
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server machines. If in doubt, say N.
+
+config MAPPED_KERNEL
+ bool "Mapped kernel support"
+ depends on SGI_IP27
+ help
+ Change the way a Linux kernel is loaded into memory on a MIPS64
+ machine. This is required in order to support text replication and
+ NUMA. If you need to understand it, read the source code.
+
+config REPLICATE_KTEXT
+ bool "Kernel text replication support"
+ depends on SGI_IP27
+ help
+ Say Y here to enable replicating the kernel text across multiple
+ nodes in a NUMA cluster. This trades memory for speed.
+
+config REPLICATE_EXHANDLERS
+ bool "Exception handler replication support"
+ depends on SGI_IP27
+ help
+ Say Y here to enable replicating the kernel exception handlers
+ across multiple nodes in a NUMA cluster. This trades memory for
+ speed.
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index d97f5b5..3e1ac29 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -30,8 +30,10 @@
static inline struct ioc3_uartregs *console_uart(void)
{
struct ioc3 *ioc3;
+ nasid_t nasid;
- ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
+ nasid = (master_nasid == INVALID_NASID) ? get_nasid() : master_nasid;
+ ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(nasid)->memory_base;
return &ioc3->sregs.uarta;
}
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 6dcee5c..8651a0e 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -56,12 +56,12 @@
{
struct hub_data *hub = hub_data(cnode);
nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
+ int i;
cpu_set(smp_processor_id(), hub->h_cpus);
if (test_and_set_bit(cnode, hub_init_mask))
return;
-
/*
* Set CRB timeout at 5ms, (< PI timeout of 10ms)
*/
@@ -88,6 +88,24 @@
__flush_cache_all();
}
#endif
+
+ /*
+ * Some interrupts are reserved by hardware or by software convention.
+ * Mark these as reserved right away so they won't be used accidently
+ * later.
+ */
+ for (i = 0; i <= BASE_PCI_IRQ; i++) {
+ __set_bit(i, hub->irq_alloc_mask);
+ LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i);
+ }
+
+ __set_bit(IP_PEND0_6_63, hub->irq_alloc_mask);
+ LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
+
+ for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
+ __set_bit(i, hub->irq_alloc_mask);
+ LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i);
+ }
}
void __init per_cpu_init(void)
@@ -104,30 +122,12 @@
clear_c0_status(ST0_IM);
+ per_hub_init(cnode);
+
for (i = 0; i < LEVELS_PER_SLICE; i++)
si->level_to_irq[i] = -1;
/*
- * Some interrupts are reserved by hardware or by software convention.
- * Mark these as reserved right away so they won't be used accidently
- * later.
- */
- for (i = 0; i <= BASE_PCI_IRQ; i++) {
- __set_bit(i, si->irq_alloc_mask);
- LOCAL_HUB_S(PI_INT_PEND_MOD, i);
- }
-
- __set_bit(IP_PEND0_6_63, si->irq_alloc_mask);
- LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
-
- for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
- __set_bit(i, si->irq_alloc_mask + 1);
- LOCAL_HUB_S(PI_INT_PEND_MOD, i);
- }
-
- LOCAL_HUB_L(PI_INT_PEND0);
-
- /*
* We use this so we can find the local hub's data as fast as only
* possible.
*/
@@ -140,8 +140,6 @@
install_cpu_nmi_handler(cputoslice(cpu));
set_c0_status(SRB_DEV0 | SRB_DEV1);
-
- per_hub_init(cnode);
}
/*
@@ -198,7 +196,7 @@
extern void ip27_time_init(void);
extern void ip27_reboot_setup(void);
-static int __init ip27_setup(void)
+void __init plat_setup(void)
{
hubreg_t p, e, n_mode;
nasid_t nid;
@@ -245,8 +243,4 @@
set_io_port_base(IO_BASE);
board_time_init = ip27_time_init;
-
- return 0;
}
-
-early_initcall(ip27_setup);
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 61817a1..73e5e52 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -5,6 +5,9 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 1999 - 2001 Kanoj Sarcar
*/
+
+#undef DEBUG
+
#include <linux/config.h>
#include <linux/init.h>
#include <linux/irq.h>
@@ -14,11 +17,11 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/smp_lock.h>
+#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/delay.h>
#include <linux/bitops.h>
@@ -37,13 +40,6 @@
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
-#undef DEBUG_IRQ
-#ifdef DEBUG_IRQ
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
/*
* Linux has a controller-independent x86 interrupt architecture.
* every controller has a 'controller-template', that is used
@@ -74,14 +70,15 @@
static inline int alloc_level(int cpu, int irq)
{
+ struct hub_data *hub = hub_data(cpu_to_node(cpu));
struct slice_data *si = cpu_data[cpu].data;
- int level; /* pre-allocated entries */
+ int level;
- level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE);
+ level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
if (level >= LEVELS_PER_SLICE)
panic("Cpu %d flooded with devices\n", cpu);
- __set_bit(level, si->irq_alloc_mask);
+ __set_bit(level, hub->irq_alloc_mask);
si->level_to_irq[level] = irq;
return level;
@@ -216,9 +213,11 @@
{
nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
struct slice_data *si = cpu_data[cpu].data;
+ unsigned long flags;
- __set_bit(bit, si->irq_enable_mask);
+ set_bit(bit, si->irq_enable_mask);
+ local_irq_save(flags);
if (!cputoslice(cpu)) {
REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
@@ -226,6 +225,7 @@
REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
}
+ local_irq_restore(flags);
return 0;
}
@@ -235,7 +235,7 @@
nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
struct slice_data *si = cpu_data[cpu].data;
- __clear_bit(bit, si->irq_enable_mask);
+ clear_bit(bit, si->irq_enable_mask);
if (!cputoslice(cpu)) {
REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
@@ -261,7 +261,7 @@
bc = IRQ_TO_BRIDGE(irq);
bridge = bc->base;
- DBG("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin);
+ pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin);
/*
* "map" irq to a swlevel greater than 6 since the first 6 bits
* of INT_PEND0 are taken
@@ -298,12 +298,13 @@
static void shutdown_bridge_irq(unsigned int irq)
{
struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+ struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
bridge_t *bridge = bc->base;
struct slice_data *si = cpu_data[bc->irq_cpu].data;
int pin, swlevel;
cpuid_t cpu;
- DBG("bridge_shutdown: irq 0x%x\n", irq);
+ pr_debug("bridge_shutdown: irq 0x%x\n", irq);
pin = SLOT_FROM_PCI_IRQ(irq);
/*
@@ -313,7 +314,7 @@
swlevel = find_level(&cpu, irq);
intr_disconnect_level(cpu, swlevel);
- __clear_bit(swlevel, si->irq_alloc_mask);
+ __clear_bit(swlevel, hub->irq_alloc_mask);
si->level_to_irq[swlevel] = -1;
bridge->b_int_enable &= ~(1 << pin);
@@ -433,25 +434,24 @@
int slice = LOCAL_HUB_L(PI_CPU_NUM);
int cpu = smp_processor_id();
struct slice_data *si = cpu_data[cpu].data;
- hubreg_t mask, set;
+ struct hub_data *hub = hub_data(cpu_to_node(cpu));
+ int resched, call;
+
+ resched = CPU_RESCHED_A_IRQ + slice;
+ __set_bit(resched, hub->irq_alloc_mask);
+ __set_bit(resched, si->irq_enable_mask);
+ LOCAL_HUB_CLR_INTR(resched);
+
+ call = CPU_CALL_A_IRQ + slice;
+ __set_bit(call, hub->irq_alloc_mask);
+ __set_bit(call, si->irq_enable_mask);
+ LOCAL_HUB_CLR_INTR(call);
if (slice == 0) {
- LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
- LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
- mask = LOCAL_HUB_L(PI_INT_MASK0_A); /* Slice A */
- set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ);
- mask |= set;
- si->irq_enable_mask[0] |= set;
- si->irq_alloc_mask[0] |= set;
- LOCAL_HUB_S(PI_INT_MASK0_A, mask);
+ LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
+ LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
} else {
- LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
- LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
- mask = LOCAL_HUB_L(PI_INT_MASK0_B); /* Slice B */
- set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ);
- mask |= set;
- si->irq_enable_mask[1] |= set;
- si->irq_alloc_mask[1] |= set;
- LOCAL_HUB_S(PI_INT_MASK0_B, mask);
+ LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
+ LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
}
}
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 17f768c..3a8291b 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -127,37 +127,28 @@
printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
}
-static void intr_clear_bits(nasid_t nasid, volatile hubreg_t *pend,
- int base_level)
+static __init void intr_clear_all(nasid_t nasid)
{
- volatile hubreg_t bits;
int i;
- /* Check pending interrupts */
- if ((bits = HUB_L(pend)) != 0)
- for (i = 0; i < N_INTPEND_BITS; i++)
- if (bits & (1 << i))
- LOCAL_HUB_CLR_INTR(base_level + i);
-}
-
-static void intr_clear_all(nasid_t nasid)
-{
REMOTE_HUB_S(nasid, PI_INT_MASK0_A, 0);
REMOTE_HUB_S(nasid, PI_INT_MASK0_B, 0);
REMOTE_HUB_S(nasid, PI_INT_MASK1_A, 0);
REMOTE_HUB_S(nasid, PI_INT_MASK1_B, 0);
- intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND0),
- INT_PEND0_BASELVL);
- intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND1),
- INT_PEND1_BASELVL);
+
+ for (i = 0; i < 128; i++)
+ REMOTE_HUB_CLR_INTR(nasid, i);
}
void __init prom_prepare_cpus(unsigned int max_cpus)
{
cnodeid_t cnode;
- for_each_online_node(cnode)
+ for_each_online_node(cnode) {
+ if (cnode == 0)
+ continue;
intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
+ }
replicate_kernel_text();
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index fc3a8e9..2eb22d69 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -163,14 +163,13 @@
#define mask_and_ack_cpu_irq disable_cpu_irq
static struct hw_interrupt_type ip32_cpu_interrupt = {
- "IP32 CPU",
- startup_cpu_irq,
- shutdown_cpu_irq,
- enable_cpu_irq,
- disable_cpu_irq,
- mask_and_ack_cpu_irq,
- end_cpu_irq,
- NULL
+ .typename = "IP32 CPU",
+ .startup = startup_cpu_irq,
+ .shutdown = shutdown_cpu_irq,
+ .enable = enable_cpu_irq,
+ .disable = disable_cpu_irq,
+ .ack = mask_and_ack_cpu_irq,
+ .end = end_cpu_irq,
};
/*
@@ -234,14 +233,13 @@
#define shutdown_crime_irq disable_crime_irq
static struct hw_interrupt_type ip32_crime_interrupt = {
- "IP32 CRIME",
- startup_crime_irq,
- shutdown_crime_irq,
- enable_crime_irq,
- disable_crime_irq,
- mask_and_ack_crime_irq,
- end_crime_irq,
- NULL
+ .typename = "IP32 CRIME",
+ .startup = startup_crime_irq,
+ .shutdown = shutdown_crime_irq,
+ .enable = enable_crime_irq,
+ .disable = disable_crime_irq,
+ .ack = mask_and_ack_crime_irq,
+ .end = end_crime_irq,
};
/*
@@ -294,14 +292,13 @@
#define mask_and_ack_macepci_irq disable_macepci_irq
static struct hw_interrupt_type ip32_macepci_interrupt = {
- "IP32 MACE PCI",
- startup_macepci_irq,
- shutdown_macepci_irq,
- enable_macepci_irq,
- disable_macepci_irq,
- mask_and_ack_macepci_irq,
- end_macepci_irq,
- NULL
+ .typename = "IP32 MACE PCI",
+ .startup = startup_macepci_irq,
+ .shutdown = shutdown_macepci_irq,
+ .enable = enable_macepci_irq,
+ .disable = disable_macepci_irq,
+ .ack = mask_and_ack_macepci_irq,
+ .end = end_macepci_irq,
};
/* This is used for MACE ISA interrupts. That means bits 4-6 in the
@@ -425,14 +422,13 @@
#define shutdown_maceisa_irq disable_maceisa_irq
static struct hw_interrupt_type ip32_maceisa_interrupt = {
- "IP32 MACE ISA",
- startup_maceisa_irq,
- shutdown_maceisa_irq,
- enable_maceisa_irq,
- disable_maceisa_irq,
- mask_and_ack_maceisa_irq,
- end_maceisa_irq,
- NULL
+ .typename = "IP32 MACE ISA",
+ .startup = startup_maceisa_irq,
+ .shutdown = shutdown_maceisa_irq,
+ .enable = enable_maceisa_irq,
+ .disable = disable_maceisa_irq,
+ .ack = mask_and_ack_maceisa_irq,
+ .end = end_maceisa_irq,
};
/* This is used for regular non-ISA, non-PCI MACE interrupts. That means
@@ -476,14 +472,13 @@
#define mask_and_ack_mace_irq disable_mace_irq
static struct hw_interrupt_type ip32_mace_interrupt = {
- "IP32 MACE",
- startup_mace_irq,
- shutdown_mace_irq,
- enable_mace_irq,
- disable_mace_irq,
- mask_and_ack_mace_irq,
- end_mace_irq,
- NULL
+ .typename = "IP32 MACE",
+ .startup = startup_mace_irq,
+ .shutdown = shutdown_mace_irq,
+ .enable = enable_mace_irq,
+ .disable = disable_mace_irq,
+ .ack = mask_and_ack_mace_irq,
+ .end = end_mace_irq,
};
static void ip32_unknown_interrupt(struct pt_regs *regs)
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
index fc76ca9..d37d40a 100644
--- a/arch/mips/sgi-ip32/ip32-memory.c
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -36,8 +36,8 @@
if (base + size > (256 << 20))
base += CRIME_HI_MEM_BASE;
- printk("CRIME MC: bank %u base 0x%016lx size %luMB\n",
- bank, base, size);
+ printk("CRIME MC: bank %u base 0x%016lx size %luMiB\n",
+ bank, base, size >> 20);
add_memory_region (base, size, BOOT_MEM_RAM);
}
}
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 8d270be..d10a269 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -92,7 +92,7 @@
setup_irq(IP32_R4K_TIMER_IRQ, irq);
}
-static int __init ip32_setup(void)
+void __init plat_setup(void)
{
board_be_init = ip32_be_init;
@@ -152,8 +152,4 @@
}
}
#endif
-
- return 0;
}
-
-early_initcall(ip32_setup);
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
new file mode 100644
index 0000000..de46f62
--- /dev/null
+++ b/arch/mips/sibyte/Kconfig
@@ -0,0 +1,161 @@
+config SIBYTE_SB1250
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_HAS_LDT
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1120
+ bool
+ select SIBYTE_BCM112X
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_BCM112X
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125H
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_BCM112X
+ select SIBYTE_HAS_LDT
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM112X
+ bool
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x80
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x55
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_SB1xxx_SOC
+ bool
+ depends on EXPERIMENTAL
+ select DMA_COHERENT
+ select SIBYTE_CFE
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+
+choice
+ prompt "SiByte SOC Stepping"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_1
+ bool "1250 Pass1"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+
+config CPU_SB1_PASS_2_1250
+ bool "1250 An"
+ depends on SIBYTE_SB1250
+ select CPU_SB1_PASS_2
+ help
+ Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+ bool "1250 Bn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+ bool "1250 Cn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+ bool "112x Hybrid"
+ depends on SIBYTE_BCM112X
+ select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+ bool "112x An"
+ depends on SIBYTE_BCM112X
+ select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+ bool
+
+config SIBYTE_HAS_LDT
+ bool
+ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+ default y
+
+config SIMULATION
+ bool "Running under simulation"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Build a kernel suitable for running under the GDB simulator.
+ Primarily adjusts the kernel's notion of time.
+
+config CONFIG_SB1_CEX_ALWAYS_FATAL
+ bool "All cache exceptions considered fatal (no recovery attempted)"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CONFIG_SB1_CERR_STALL
+ bool "Stall (rather than panic) on fatal cache error"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_CFE
+ bool "Booting from CFE"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Make use of the CFE API for enumerating available memory,
+ controlling secondary CPUs, and possibly console output.
+
+config SIBYTE_CFE_CONSOLE
+ bool "Use firmware console"
+ depends on SIBYTE_CFE
+ help
+ Use the CFE API's console write routines during boot. Other console
+ options (VT console, sb1250 duart console, etc.) should not be
+ configured.
+
+config SIBYTE_STANDALONE
+ bool
+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+ default y
+
+config SIBYTE_STANDALONE_RAM_SIZE
+ int "Memory size (in megabytes)"
+ depends on SIBYTE_STANDALONE
+ default "32"
+
+config SIBYTE_BUS_WATCHER
+ bool "Support for Bus Watcher statistics"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Handle and keep statistics on the bus error interrupts (COR_ECC,
+ BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+ bool "Capture bus trace before bus error"
+ depends on SIBYTE_BUS_WATCHER
+ help
+ Run a continuous bus trace, dumping the raw data as soon as
+ a ZBbus error is detected. Cannot work if ZBbus profiling
+ is turned on, and also will interfere with JTAG-based trace
+ buffer activity. Raw buffer data is dumped to console, and
+ must be processed off-line.
+
+config SIBYTE_SB1250_PROF
+ bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_TBPROF
+ bool "Support for ZBbus profiling"
+ depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
new file mode 100644
index 0000000..538d5a5
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -0,0 +1,5 @@
+obj-y := setup.o irq.o irq_handler.o time.o
+
+obj-$(CONFIG_SMP) += smp.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
new file mode 100644
index 0000000..b2a1ba5
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+
+#define shutdown_bcm1480_irq disable_bcm1480_irq
+static void end_bcm1480_irq(unsigned int irq);
+static void enable_bcm1480_irq(unsigned int irq);
+static void disable_bcm1480_irq(unsigned int irq);
+static unsigned int startup_bcm1480_irq(unsigned int irq);
+static void ack_bcm1480_irq(unsigned int irq);
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
+#endif
+
+#ifdef CONFIG_PCI
+extern unsigned long ht_eoi_space;
+#endif
+
+#ifdef CONFIG_KGDB
+#include <asm/gdb-stub.h>
+extern void breakpoint(void);
+static int kgdb_irq;
+#ifdef CONFIG_GDB_CONSOLE
+extern void register_gdb_console(void);
+#endif
+
+/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
+static int kgdb_flag = 1;
+static int __init nokgdb(char *str)
+{
+ kgdb_flag = 0;
+ return 1;
+}
+__setup("nokgdb", nokgdb);
+
+/* Default to UART1 */
+int kgdb_port = 1;
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+extern char sb1250_duart_present[];
+#endif
+#endif
+
+static struct hw_interrupt_type bcm1480_irq_type = {
+ .typename = "BCM1480-IMR",
+ .startup = startup_bcm1480_irq,
+ .shutdown = shutdown_bcm1480_irq,
+ .enable = enable_bcm1480_irq,
+ .disable = disable_bcm1480_irq,
+ .ack = ack_bcm1480_irq,
+ .end = end_bcm1480_irq,
+#ifdef CONFIG_SMP
+ .set_affinity = bcm1480_set_affinity
+#endif
+};
+
+/* Store the CPU id (not the logical number) */
+int bcm1480_irq_owner[BCM1480_NR_IRQS];
+
+DEFINE_SPINLOCK(bcm1480_imr_lock);
+
+void bcm1480_mask_irq(int cpu, int irq)
+{
+ unsigned long flags;
+ u64 cur_ints,hl_spacing;
+
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ hl_spacing = 0;
+ if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+ hl_spacing = BCM1480_IMR_HL_SPACING;
+ irq -= BCM1480_NR_IRQS_HALF;
+ }
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ cur_ints |= (((u64) 1) << irq);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+void bcm1480_unmask_irq(int cpu, int irq)
+{
+ unsigned long flags;
+ u64 cur_ints,hl_spacing;
+
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ hl_spacing = 0;
+ if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+ hl_spacing = BCM1480_IMR_HL_SPACING;
+ irq -= BCM1480_NR_IRQS_HALF;
+ }
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ cur_ints &= ~(((u64) 1) << irq);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
+{
+ int i = 0, old_cpu, cpu, int_on;
+ u64 cur_ints;
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+ unsigned int irq_dirty;
+
+ i = first_cpu(mask);
+ if (next_cpu(i, mask) <= NR_CPUS) {
+ printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
+ return;
+ }
+
+ /* Convert logical CPU to physical CPU */
+ cpu = cpu_logical_map(i);
+
+ /* Protect against other affinity changers and IMR manipulation */
+ spin_lock_irqsave(&desc->lock, flags);
+ spin_lock(&bcm1480_imr_lock);
+
+ /* Swizzle each CPU's IMR (but leave the IP selection alone) */
+ old_cpu = bcm1480_irq_owner[irq];
+ irq_dirty = irq;
+ if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+ irq_dirty -= BCM1480_NR_IRQS_HALF;
+ }
+
+ int k;
+ for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ int_on = !(cur_ints & (((u64) 1) << irq_dirty));
+ if (int_on) {
+ /* If it was on, mask it */
+ cur_ints |= (((u64) 1) << irq_dirty);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ }
+ bcm1480_irq_owner[irq] = cpu;
+ if (int_on) {
+ /* unmask for the new CPU */
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ cur_ints &= ~(((u64) 1) << irq_dirty);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ }
+ }
+ spin_unlock(&bcm1480_imr_lock);
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+#endif
+
+
+/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
+extern void bcm1480_irq_handler(void);
+
+/*****************************************************************************/
+
+static unsigned int startup_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+
+ return 0; /* never anything pending */
+}
+
+
+static void disable_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static void enable_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void ack_bcm1480_irq(unsigned int irq)
+{
+ u64 pending;
+ unsigned int irq_dirty;
+
+ /*
+ * If the interrupt was an HT interrupt, now is the time to
+ * clear it. NOTE: we assume the HT bridge was set up to
+ * deliver the interrupts to all CPUs (which makes affinity
+ * changing easier for us)
+ */
+ irq_dirty = irq;
+ if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+ irq_dirty -= BCM1480_NR_IRQS_HALF;
+ }
+ int k;
+ for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
+ pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
+ R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
+ pending &= ((u64)1 << (irq_dirty));
+ if (pending) {
+#ifdef CONFIG_SMP
+ int i;
+ for (i=0; i<NR_CPUS; i++) {
+ /*
+ * Clear for all CPUs so an affinity switch
+ * doesn't find an old status
+ */
+ __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
+ R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+ }
+#else
+ __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+#endif
+
+ /*
+ * Generate EOI. For Pass 1 parts, EOI is a nop. For
+ * Pass 2, the LDT world may be edge-triggered, but
+ * this EOI shouldn't hurt. If they are
+ * level-sensitive, the EOI is required.
+ */
+#ifdef CONFIG_PCI
+ if (ht_eoi_space)
+ *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
+#endif
+ }
+ }
+ bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void end_bcm1480_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+ }
+}
+
+
+void __init init_bcm1480_irqs(void)
+{
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ if (i < BCM1480_NR_IRQS) {
+ irq_desc[i].handler = &bcm1480_irq_type;
+ bcm1480_irq_owner[i] = 0;
+ } else {
+ irq_desc[i].handler = &no_irq_type;
+ }
+ }
+}
+
+
+static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ return IRQ_NONE;
+}
+
+static struct irqaction bcm1480_dummy_action = {
+ .handler = bcm1480_dummy_handler,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = "bcm1480-private",
+ .next = NULL,
+ .dev_id = 0
+};
+
+int bcm1480_steal_irq(int irq)
+{
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+ int retval = 0;
+
+ if (irq >= BCM1480_NR_IRQS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&desc->lock,flags);
+ /* Don't allow sharing at all for these */
+ if (desc->action != NULL)
+ retval = -EBUSY;
+ else {
+ desc->action = &bcm1480_dummy_action;
+ desc->depth = 0;
+ }
+ spin_unlock_irqrestore(&desc->lock,flags);
+ return 0;
+}
+
+/*
+ * init_IRQ is called early in the boot sequence from init/main.c. It
+ * is responsible for setting up the interrupt mapper and installing the
+ * handler that will be responsible for dispatching interrupts to the
+ * "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2]. We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup. We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt. That one is
+ * set to IP[2] so it is handled. This is needed so we
+ * can do cross-cpu function calls, as requred by SMP
+ */
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+#define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
+#define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+
+ unsigned int i, cpu;
+ u64 tmp;
+ unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+ STATUSF_IP1 | STATUSF_IP0;
+
+ /* Default everything to IP2 */
+ /* Start with _high registers which has no bit 0 interrupt source */
+ for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
+ }
+ }
+
+ /* Now do _low registers */
+ for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
+ }
+ }
+
+ init_bcm1480_irqs();
+
+ /*
+ * Map the high 16 bits of mailbox_0 registers to IP[3], for
+ * inter-cpu messages
+ */
+ /* Was I1 */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+ (K_BCM1480_INT_MBOX_0_0 << 3)));
+ }
+
+
+ /* Clear the mailboxes. The firmware may leave them dirty */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
+ }
+
+
+ /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
+ tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
+ }
+ tmp = ~((u64) 0);
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
+ }
+
+ bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
+
+ /*
+ * Note that the timer interrupts are also mapped, but this is
+ * done in bcm1480_time_init(). Also, the profiling driver
+ * does its own management of IP7.
+ */
+
+#ifdef CONFIG_KGDB
+ imask |= STATUSF_IP6;
+#endif
+ /* Enable necessary IPs, disable the rest */
+ change_c0_status(ST0_IM, imask);
+ set_except_vector(0, bcm1480_irq_handler);
+
+#ifdef CONFIG_KGDB
+ if (kgdb_flag) {
+ kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
+
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+ sb1250_duart_present[kgdb_port] = 0;
+#endif
+ /* Setup uart 1 settings, mapper */
+ /* QQQ FIXME */
+ __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+
+ bcm1480_steal_irq(kgdb_irq);
+ __raw_writeq(IMR_IP6_VAL,
+ IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+ (kgdb_irq<<3));
+ bcm1480_unmask_irq(0, kgdb_irq);
+
+#ifdef CONFIG_GDB_CONSOLE
+ register_gdb_console();
+#endif
+ prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
+ set_debug_traps();
+ breakpoint();
+ }
+#endif
+}
+
+#ifdef CONFIG_KGDB
+
+#include <linux/delay.h>
+
+#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void bcm1480_kgdb_interrupt(struct pt_regs *regs)
+{
+ /*
+ * Clear break-change status (allow some time for the remote
+ * host to stop the break, since we would see another
+ * interrupt on the end-of-break too)
+ */
+ kstat.irqs[smp_processor_id()][kgdb_irq]++;
+ mdelay(500);
+ duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
+ M_DUART_RX_EN | M_DUART_TX_EN);
+ set_async_breakpoint(®s->cp0_epc);
+}
+
+#endif /* CONFIG_KGDB */
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
new file mode 100644
index 0000000..408db88
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq_handler.S
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * bcm1480_irq_handler() is the routine that is actually called when an
+ * interrupt occurs. It is installed as the exception vector handler in
+ * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that
+ * to call the dispatcher, which will take care of actually calling
+ * registered handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call. Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+ .text
+ .set push
+ .set noreorder
+ .set noat
+ .set mips64
+ #.set mips4
+ .align 5
+ NESTED(bcm1480_irq_handler, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Set compare to count to silence count/compare timer interrupts */
+ mfc0 t1, CP0_COUNT
+ mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+ /* Read cause */
+ mfc0 s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Cpu performance counter interrupt is routed to IP[7] */
+ andi t1, s0, CAUSEF_IP7
+ beqz t1, 0f
+ srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
+ and t1, t1, 0x4 /* mask to get just BD bit */
+#ifdef CONFIG_MIPS64
+ dmfc0 a0, CP0_EPC
+ daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#else
+ mfc0 a0, CP0_EPC
+ addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#endif
+ jal sbprof_cpu_intr
+ nop
+ j ret_from_irq
+ nop
+0:
+#endif
+
+ /* Timer interrupt is routed to IP[4] */
+ andi t1, s0, CAUSEF_IP4
+ beqz t1, 1f
+ nop
+ jal bcm1480_timer_interrupt
+ move a0, sp /* Pass the registers along */
+ j ret_from_irq
+ nop /* delay slot */
+1:
+
+#ifdef CONFIG_SMP
+ /* Mailbox interrupt is routed to IP[3] */
+ andi t1, s0, CAUSEF_IP3
+ beqz t1, 2f
+ nop
+ jal bcm1480_mailbox_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+ /* KGDB (uart 1) interrupt is routed to IP[6] */
+ andi t1, s0, CAUSEF_IP6
+ beqz t1, 3f
+ nop /* delay slot */
+ jal bcm1480_kgdb_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+3:
+#endif
+
+ and t1, s0, CAUSEF_IP2
+ beqz t1, 9f
+ nop
+
+ /*
+ * Default...we've hit an IP[2] interrupt, which means we've got
+ * to check the 1480 interrupt registers to figure out what to do
+ * Need to detect which CPU we're on, now that smp_affinity is
+ * supported.
+ */
+ PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+ lw t1, TI_CPU($28)
+ sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
+ addu v0, v0, t1
+#endif
+
+ /* Read IP[2] status (get both high and low halves of status) */
+ ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
+ ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
+
+ move s2, zero /* intr number */
+ li s3, 64
+
+ beqz s0, 9f /* No interrupts. Return. */
+ move a1, sp
+
+ xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */
+ movz s2, s3, s4 /* start the intr number at 64, and */
+ movz s0, s1, s4 /* look at the low status value. */
+
+ dclz s1, s0 /* Find the next interrupt. */
+ dsubu a0, zero, s1
+ daddiu a0, a0, 63
+ jal do_IRQ
+ daddu a0, a0, s2
+
+9: j ret_from_irq
+ nop
+
+ .set pop
+ END(bcm1480_irq_handler)
diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c
new file mode 100644
index 0000000..d90a0b8
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/setup.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+unsigned int sb1_pass;
+unsigned int soc_pass;
+unsigned int soc_type;
+unsigned int periph_rev;
+unsigned int zbbus_mhz;
+
+static unsigned int part_type;
+
+static char *soc_str;
+static char *pass_str;
+
+static inline int setup_bcm1x80_bcm1x55(void);
+
+/* Setup code likely to be common to all SiByte platforms */
+
+static inline int sys_rev_decode(void)
+{
+ int ret = 0;
+
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1x80:
+ if (part_type == K_SYS_PART_BCM1480)
+ soc_str = "BCM1480";
+ else if (part_type == K_SYS_PART_BCM1280)
+ soc_str = "BCM1280";
+ else
+ soc_str = "BCM1x80";
+ ret = setup_bcm1x80_bcm1x55();
+ break;
+
+ case K_SYS_SOC_TYPE_BCM1x55:
+ if (part_type == K_SYS_PART_BCM1455)
+ soc_str = "BCM1455";
+ else if (part_type == K_SYS_PART_BCM1255)
+ soc_str = "BCM1255";
+ else
+ soc_str = "BCM1x55";
+ ret = setup_bcm1x80_bcm1x55();
+ break;
+
+ default:
+ prom_printf("Unknown part type %x\n", part_type);
+ ret = 1;
+ break;
+ }
+ return ret;
+}
+
+static inline int setup_bcm1x80_bcm1x55(void)
+{
+ int ret = 0;
+
+ switch (soc_pass) {
+ case K_SYS_REVISION_BCM1480_S0:
+ periph_rev = 1;
+ pass_str = "S0 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A1:
+ periph_rev = 1;
+ pass_str = "A1 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A2:
+ periph_rev = 1;
+ pass_str = "A2 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A3:
+ periph_rev = 1;
+ pass_str = "A3 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_B0:
+ periph_rev = 1;
+ pass_str = "B0 (pass2)";
+ break;
+ default:
+ prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+ periph_rev = 1;
+ pass_str = "Unknown Revision";
+ break;
+ }
+ return ret;
+}
+
+void bcm1480_setup(void)
+{
+ uint64_t sys_rev;
+ int plldiv;
+
+ sb1_pass = read_c0_prid() & 0xff;
+ sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+ soc_type = SYS_SOC_TYPE(sys_rev);
+ part_type = G_SYS_PART(sys_rev);
+ soc_pass = G_SYS_REVISION(sys_rev);
+
+ if (sys_rev_decode()) {
+ prom_printf("Restart after failure to identify SiByte chip\n");
+ machine_restart(NULL);
+ }
+
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
+
+ prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
+ soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
+ prom_printf("Board type: %s\n", get_system_type());
+}
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
new file mode 100644
index 0000000..584a4b3
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001,2002,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+extern void smp_call_function_interrupt(void);
+
+/*
+ * These are routines for dealing with the bcm1480 smp capabilities
+ * independent of board/firmware
+ */
+
+static void *mailbox_0_set_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+};
+
+static void *mailbox_0_clear_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+};
+
+static void *mailbox_0_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+};
+
+/*
+ * SMP init and finish on secondary CPUs
+ */
+void bcm1480_smp_init(void)
+{
+ unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+ STATUSF_IP1 | STATUSF_IP0;
+
+ /* Set interrupt mask, but don't enable */
+ change_c0_status(ST0_IM, imask);
+}
+
+void bcm1480_smp_finish(void)
+{
+ extern void bcm1480_time_init(void);
+ bcm1480_time_init();
+ local_irq_enable();
+}
+
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+ __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+void bcm1480_mailbox_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ unsigned int action;
+
+ kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
+ /* Load the mailbox register to figure out what we're supposed to do */
+ action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
+
+ /* Clear the mailbox to clear the interrupt */
+ __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
+
+ /*
+ * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
+ * interrupt will do the reschedule for us
+ */
+
+ if (action & SMP_CALL_FUNCTION)
+ smp_call_function_interrupt();
+}
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
new file mode 100644
index 0000000..e545752
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * These are routines to set up and handle interrupts from the
+ * bcm1480 general purpose timer 0. We're using the timer as a
+ * system clock, so we set it up to run at 100 Hz. On every
+ * interrupt, we update our idea of what the time of day is,
+ * then call do_timer() in the architecture-independent kernel
+ * code to do general bookkeeping (e.g. update jiffies, run
+ * bottom halves, etc.)
+ */
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+
+extern int bcm1480_steal_irq(int irq);
+
+void bcm1480_time_init(void)
+{
+ int cpu = smp_processor_id();
+ int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+ /* Only have 4 general purpose timers */
+ if (cpu > 3) {
+ BUG();
+ }
+
+ if (!cpu) {
+ /* Use our own gettimeoffset() routine */
+ do_gettimeoffset = bcm1480_gettimeoffset;
+ }
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /* Map the timer interrupt to ip[4] of this cpu */
+ __raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+ + (irq<<3)));
+
+ /* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
+ /* Disable the timer and set up the count */
+ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(
+#ifndef CONFIG_SIMULATION
+ 1000000/HZ
+#else
+ 50000/HZ
+#endif
+ , IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+
+ /* Set the timer running */
+ __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+ bcm1480_unmask_irq(cpu, irq);
+ bcm1480_steal_irq(irq);
+ /*
+ * This interrupt is "special" in that it doesn't use the request_irq
+ * way to hook the irq line. The timer interrupt is initialized early
+ * enough to make this a major pain, and it's also firing enough to
+ * warrant a bit of special case code. bcm1480_timer_interrupt is
+ * called directly from irq_handler.S when IP[4] is set during an
+ * interrupt
+ */
+}
+
+#include <asm/sibyte/sb1250.h>
+
+void bcm1480_timer_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+ /* Reset the timer */
+ __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+ /*
+ * CPU 0 handles the global timer interrupt job
+ */
+ if (cpu == 0) {
+ ll_timer_interrupt(irq, regs);
+ }
+
+ /*
+ * every CPU should do profiling and process accouting
+ */
+ ll_local_timer_interrupt(irq, regs);
+}
+
+/*
+ * We use our own do_gettimeoffset() instead of the generic one,
+ * because the generic one does not work for SMP case.
+ * In addition, since we use general timer 0 for system time,
+ * we can get accurate intra-jiffy offset without calibration.
+ */
+unsigned long bcm1480_gettimeoffset(void)
+{
+ unsigned long count =
+ __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+
+ return 1000000/HZ - count;
+}
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index e44ce1a..e848512 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -70,8 +70,15 @@
*/
void prom_init_secondary(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ extern void bcm1480_smp_init(void);
+ bcm1480_smp_init();
+#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_init(void);
sb1250_smp_init();
+#else
+#error invalid SMP configuration
+#endif
}
/*
@@ -80,8 +87,15 @@
*/
void prom_smp_finish(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ extern void bcm1480_smp_finish(void);
+ bcm1480_smp_finish();
+#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_finish(void);
sb1250_smp_finish();
+#else
+#error invalid SMP configuration
+#endif
}
/*
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
index 7f813ae..992e0d8 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -28,6 +28,8 @@
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/wait.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
@@ -64,24 +66,25 @@
u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
trigger start of trace. XXX vary sampling period */
- bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
- scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+ __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Unfortunately, in Pass 2 we must clear all counters to knock down
a previous interrupt request. This means that bus profiling
requires ALL of the SCD perf counters. */
- bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is
- M_SPC_CFG_ENABLE | // enable counting
- M_SPC_CFG_CLEAR | // clear all counters
- V_SPC_CFG_SRC1(1), // counter 1 counts cycles
- IOADDR(A_SCD_PERF_CNT_CFG));
- bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+ __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+ // keep counters 0,2,3 as is
+ M_SPC_CFG_ENABLE | // enable counting
+ M_SPC_CFG_CLEAR | // clear all counters
+ V_SPC_CFG_SRC1(1), // counter 1 counts cycles
+ IOADDR(A_SCD_PERF_CNT_CFG));
+ __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
/* Reset the trace buffer */
- bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
/* XXXKW may want to expose control to the data-collector */
tb_options |= M_SCD_TRACE_CFG_FORCECNT;
#endif
- bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 1;
}
@@ -93,23 +96,30 @@
/* XXX should use XKPHYS to make writes bypass L2 */
u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
/* Read out trace */
- bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_START_READ,
+ IOADDR(A_SCD_TRACE_CFG));
__asm__ __volatile__ ("sync" : : : "memory");
/* Loop runs backwards because bundles are read out in reverse order */
for (i = 256 * 6; i > 0; i -= 6) {
// Subscripts decrease to put bundle in the order
// t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
- p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi
- p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo
- p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi
- p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo
- p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi
- p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo
+ p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t2 hi
+ p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t2 lo
+ p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t1 hi
+ p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t1 lo
+ p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t0 hi
+ p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t0 lo
}
if (!sbp.tb_enable) {
DBG(printk(DEVNAME ": tb_intr shutdown\n"));
- bus_writeq(M_SCD_TRACE_CFG_RESET,
- IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_RESET,
+ IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
wake_up(&sbp.tb_sync);
} else {
@@ -118,7 +128,7 @@
} else {
/* No more trace buffer samples */
DBG(printk(DEVNAME ": tb_intr full\n"));
- bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
if (!sbp.tb_enable) {
wake_up(&sbp.tb_sync);
@@ -152,13 +162,11 @@
return -EBUSY;
}
/* Make sure there isn't a perf-cnt interrupt waiting */
- scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Disable and clear counters, override SRC_1 */
- bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
- M_SPC_CFG_ENABLE |
- M_SPC_CFG_CLEAR |
- V_SPC_CFG_SRC1(1),
- IOADDR(A_SCD_PERF_CNT_CFG));
+ __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+ M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
+ IOADDR(A_SCD_PERF_CNT_CFG));
/* We grab this interrupt to prevent others from trying to use
it, even though we don't want to service the interrupts
@@ -172,55 +180,55 @@
/* I need the core to mask these, but the interrupt mapper to
pass them through. I am exploiting my knowledge that
cp0_status masks out IP[5]. krw */
- bus_writeq(K_INT_MAP_I3,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (K_INT_PERF_CNT << 3)));
+ __raw_writeq(K_INT_MAP_I3,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_PERF_CNT << 3)));
/* Initialize address traps */
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
/* Initialize Trace Event 0-7 */
// when interrupt
- bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+ __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
/* Initialize Trace Sequence 0-7 */
// Start on event 0 (interrupt)
- bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
- IOADDR(A_SCD_TRACE_SEQUENCE_0));
+ __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+ IOADDR(A_SCD_TRACE_SEQUENCE_0));
// dsamp when d used | asamp when a used
- bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
- K_SCD_TRSEQ_TRIGGER_ALL,
- IOADDR(A_SCD_TRACE_SEQUENCE_1));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+ __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+ K_SCD_TRSEQ_TRIGGER_ALL,
+ IOADDR(A_SCD_TRACE_SEQUENCE_1));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
- bus_writeq((1ULL << K_INT_PERF_CNT),
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+ __raw_writeq(1ULL << K_INT_PERF_CNT,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
arm_tb();
@@ -231,6 +239,7 @@
int sbprof_zbprof_stop(void)
{
+ DEFINE_WAIT(wait);
DBG(printk(DEVNAME ": stopping\n"));
if (sbp.tb_enable) {
@@ -240,7 +249,9 @@
this sleep happens. */
if (sbp.tb_armed) {
DBG(printk(DEVNAME ": wait for disarm\n"));
- interruptible_sleep_on(&sbp.tb_sync);
+ prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&sbp.tb_sync, &wait);
DBG(printk(DEVNAME ": disarm complete\n"));
}
free_irq(K_INT_TRACE_FREEZE, &sbp);
@@ -333,13 +344,13 @@
return count;
}
-static int sbprof_tb_ioctl(struct inode *inode,
- struct file *filp,
- unsigned int command,
- unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp,
+ unsigned int command,
+ unsigned long arg)
{
int error = 0;
+ lock_kernel();
switch (command) {
case SBPROF_ZBSTART:
error = sbprof_zbprof_start(filp);
@@ -348,13 +359,17 @@
error = sbprof_zbprof_stop();
break;
case SBPROF_ZBWAITFULL:
- interruptible_sleep_on(&sbp.tb_read);
+ DEFINE_WAIT(wait);
+ prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&sbp.tb_read, &wait);
/* XXXKW check if interrupted? */
return put_user(TB_FULL, (int *) arg);
default:
error = -EINVAL;
break;
}
+ unlock_kernel();
return error;
}
@@ -364,7 +379,8 @@
.open = sbprof_tb_open,
.release = sbprof_tb_release,
.read = sbprof_tb_read,
- .ioctl = sbprof_tb_ioctl,
+ .unlocked_ioctl = sbprof_tb_ioctl,
+ .compat_ioctl = sbprof_tb_ioctl,
.mmap = NULL,
};
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 1a97e31..482dee0 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -189,7 +189,7 @@
for (i=0; i<256*6; i++)
printk("%016llx\n",
- (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));
+ (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ)));
csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 2725b26..589537b 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -53,7 +53,7 @@
static unsigned int startup_sb1250_irq(unsigned int irq);
static void ack_sb1250_irq(unsigned int irq);
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask);
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
#endif
#ifdef CONFIG_SIBYTE_HAS_LDT
@@ -71,17 +71,15 @@
#endif
static struct hw_interrupt_type sb1250_irq_type = {
- "SB1250-IMR",
- startup_sb1250_irq,
- shutdown_sb1250_irq,
- enable_sb1250_irq,
- disable_sb1250_irq,
- ack_sb1250_irq,
- end_sb1250_irq,
+ .typename = "SB1250-IMR",
+ .startup = startup_sb1250_irq,
+ .shutdown = shutdown_sb1250_irq,
+ .enable = enable_sb1250_irq,
+ .disable = disable_sb1250_irq,
+ .ack = ack_sb1250_irq,
+ .end = end_sb1250_irq,
#ifdef CONFIG_SMP
- sb1250_set_affinity
-#else
- NULL
+ .set_affinity = sb1250_set_affinity
#endif
};
@@ -96,11 +94,11 @@
u64 cur_ints;
spin_lock_irqsave(&sb1250_imr_lock, flags);
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
cur_ints |= (((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
@@ -110,32 +108,25 @@
u64 cur_ints;
spin_lock_irqsave(&sb1250_imr_lock, flags);
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
cur_ints &= ~(((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
- while (mask) {
- if (mask & 1) {
- mask >>= 1;
- break;
- }
- mask >>= 1;
- i++;
- }
+ i = first_cpu(mask);
- if (mask) {
+ if (cpus_weight(mask) > 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
return;
}
@@ -149,23 +140,23 @@
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = sb1250_irq_owner[irq];
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
+ R_IMR_INTERRUPT_MASK));
int_on = !(cur_ints & (((u64) 1) << irq));
if (int_on) {
/* If it was on, mask it */
cur_ints |= (((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
+ R_IMR_INTERRUPT_MASK));
}
sb1250_irq_owner[irq] = cpu;
if (int_on) {
/* unmask for the new CPU */
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
cur_ints &= ~(((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
}
spin_unlock(&sb1250_imr_lock);
spin_unlock_irqrestore(&desc->lock, flags);
@@ -208,8 +199,8 @@
* deliver the interrupts to all CPUs (which makes affinity
* changing easier for us)
*/
- pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
- R_IMR_LDT_INTERRUPT)));
+ pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
+ R_IMR_LDT_INTERRUPT)));
pending &= ((u64)1 << (irq));
if (pending) {
int i;
@@ -224,8 +215,8 @@
* Clear for all CPUs so an affinity switch
* doesn't find an old status
*/
- bus_writeq(pending,
- IOADDR(A_IMR_REGISTER(cpu,
+ __raw_writeq(pending,
+ IOADDR(A_IMR_REGISTER(cpu,
R_IMR_LDT_INTERRUPT_CLR)));
}
@@ -340,12 +331,14 @@
/* Default everything to IP2 */
for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */
- bus_writeq(IMR_IP2_VAL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (i << 3)));
- bus_writeq(IMR_IP2_VAL,
- IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
- (i << 3)));
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_IMR_REGISTER(0,
+ R_IMR_INTERRUPT_MAP_BASE) +
+ (i << 3)));
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_IMR_REGISTER(1,
+ R_IMR_INTERRUPT_MAP_BASE) +
+ (i << 3)));
}
init_sb1250_irqs();
@@ -355,23 +348,23 @@
* inter-cpu messages
*/
/* Was I1 */
- bus_writeq(IMR_IP3_VAL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (K_INT_MBOX_0 << 3)));
- bus_writeq(IMR_IP3_VAL,
- IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
- (K_INT_MBOX_0 << 3)));
+ __raw_writeq(IMR_IP3_VAL,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_MBOX_0 << 3)));
+ __raw_writeq(IMR_IP3_VAL,
+ IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_MBOX_0 << 3)));
/* Clear the mailboxes. The firmware may leave them dirty */
- bus_writeq(0xffffffffffffffffULL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
- bus_writeq(0xffffffffffffffffULL,
- IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
/* Mask everything except the mailbox registers for both cpus */
tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
- bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
- bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
+ __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
+ __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
sb1250_steal_irq(K_INT_MBOX_0);
@@ -396,12 +389,14 @@
sb1250_duart_present[kgdb_port] = 0;
#endif
/* Setup uart 1 settings, mapper */
- bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
+ __raw_writeq(M_DUART_IMR_BRK,
+ IOADDR(A_DUART_IMRREG(kgdb_port)));
sb1250_steal_irq(kgdb_irq);
- bus_writeq(IMR_IP6_VAL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (kgdb_irq<<3)));
+ __raw_writeq(IMR_IP6_VAL,
+ IOADDR(A_IMR_REGISTER(0,
+ R_IMR_INTERRUPT_MAP_BASE) +
+ (kgdb_irq << 3)));
sb1250_unmask_irq(0, kgdb_irq);
}
#endif
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index f8c605b..df2e266 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -153,7 +153,7 @@
int bad_config = 0;
sb1_pass = read_c0_prid() & 0xff;
- sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+ sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
soc_type = SYS_SOC_TYPE(sys_rev);
soc_pass = G_SYS_REVISION(sys_rev);
@@ -162,7 +162,7 @@
machine_restart(NULL);
}
- plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index be91b39..f859db0 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -29,18 +29,18 @@
#include <asm/sibyte/sb1250_int.h>
static void *mailbox_set_regs[] = {
- (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
- (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
+ IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
+ IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
};
static void *mailbox_clear_regs[] = {
- (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
- (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
+ IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
+ IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
};
static void *mailbox_regs[] = {
- (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
- (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
+ IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
+ IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
};
/*
@@ -73,7 +73,7 @@
*/
void core_send_ipi(int cpu, unsigned int action)
{
- bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+ __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
}
void sb1250_mailbox_interrupt(struct pt_regs *regs)
@@ -83,10 +83,10 @@
kstat_this_cpu.irqs[K_INT_MBOX_0]++;
/* Load the mailbox register to figure out what we're supposed to do */
- action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
+ action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
/* Clear the mailbox to clear the interrupt */
- __bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
+ ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
/*
* Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 8b4c848..511c89d 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -67,24 +67,24 @@
sb1250_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
- bus_writeq(IMR_IP4_VAL,
- IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
- (irq << 3)));
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+ (irq << 3)));
/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
/* Disable the timer and set up the count */
- bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
#ifdef CONFIG_SIMULATION
- bus_writeq(50000 / HZ,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+ __raw_writeq(50000 / HZ,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#else
- bus_writeq(1000000/HZ,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+ __raw_writeq(1000000 / HZ,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#endif
/* Set the timer running */
- bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
sb1250_unmask_irq(cpu, irq);
sb1250_steal_irq(irq);
@@ -100,25 +100,25 @@
void sb1250_timer_interrupt(struct pt_regs *regs)
{
- extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0 + cpu;
/* Reset the timer */
- __bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
- /*
- * CPU 0 handles the global timer interrupt job
- */
if (cpu == 0) {
+ /*
+ * CPU 0 handles the global timer interrupt job
+ */
ll_timer_interrupt(irq, regs);
}
-
- /*
- * every CPU should do profiling and process accouting
- */
- ll_local_timer_interrupt(irq, regs);
+ else {
+ /*
+ * other CPUs should just do profiling and process accounting
+ */
+ ll_local_timer_interrupt(irq, regs);
+ }
}
/*
@@ -130,7 +130,7 @@
unsigned long sb1250_gettimeoffset(void)
{
unsigned long count =
- bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+ __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
return 1000000/HZ - count;
}
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index a686bb7..5b4fc26 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -82,59 +82,60 @@
#define M41T81REG_SQW 0x13 /* square wave register */
#define M41T81_CCR_ADDRESS 0x68
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg))
static int m41t81_read(uint8_t addr)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
- bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
- return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
}
static int m41t81_write(uint8_t addr, int b)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
- bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
- bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
/* read the same byte again to make sure it is written */
- bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
return 0;
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 981d21f..d9ff932 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -57,52 +57,52 @@
#define X1241_CCR_ADDRESS 0x6F
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg))
static int xicor_read(uint8_t addr)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
- return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
}
static int xicor_write(uint8_t addr, int b)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq(addr, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
- bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+ __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
} else {
return 0;
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 4daeaa41..b614ca0 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or
@@ -39,11 +39,23 @@
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/sibyte/sb1250.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
+#else
+#error invalid SiByte board configuation
+#endif
#include <asm/sibyte/sb1250_genbus.h>
#include <asm/sibyte/board.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+extern void bcm1480_setup(void);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
extern void sb1250_setup(void);
+#else
+#error invalid SiByte board configuation
+#endif
extern int xicor_probe(void);
extern int xicor_set_time(unsigned long);
@@ -66,27 +78,34 @@
*/
/* We only need to setup the generic timer */
- sb1250_time_init();
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ bcm1480_time_init();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+ sb1250_time_init();
+#else
+#error invalid SiByte board configuation
+#endif
}
int swarm_be_handler(struct pt_regs *regs, int is_fixup)
{
if (!is_fixup && (regs->cp0_cause & 4)) {
/* Data bus error - print PA */
-#ifdef CONFIG_64BIT
- printk("DBE physical address: %010lx\n",
+ printk("DBE physical address: %010Lx\n",
__read_64bit_c0_register($26, 1));
-#else
- printk("DBE physical address: %010llx\n",
- __read_64bit_c0_split($26, 1));
-#endif
}
return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
}
-static int __init swarm_setup(void)
+void __init plat_setup(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ bcm1480_setup();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_setup();
+#else
+#error invalid SiByte board configuation
+#endif
panic_timeout = 5; /* For debug. */
@@ -133,12 +152,8 @@
};
/* XXXKW for CFE, get lines/cols from environment */
#endif
-
- return 0;
}
-early_initcall(swarm_setup);
-
#ifdef LEDS_PHYS
#ifdef CONFIG_SIBYTE_CARMEL
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
index c1f1a9de..97c73c7 100644
--- a/arch/mips/sibyte/swarm/time.c
+++ b/arch/mips/sibyte/swarm/time.c
@@ -79,48 +79,48 @@
static int xicor_read(uint8_t addr)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
- return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
}
static int xicor_write(uint8_t addr, int b)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq(addr, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
- bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+ __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
} else {
return 0;
@@ -228,8 +228,8 @@
/* Establish communication with the Xicor 1241 RTC */
/* XXXKW how do I share the SMBus with the I2C subsystem? */
- bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
- bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+ __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+ __raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
printk("x1241: couldn't detect on SWARM SMBus 1\n");
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 141a310..952038a 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -58,14 +58,13 @@
}
static struct hw_interrupt_type pciasic_irq_type = {
- "ASIC-PCI",
- startup_pciasic_irq,
- shutdown_pciasic_irq,
- enable_pciasic_irq,
- disable_pciasic_irq,
- mask_and_ack_pciasic_irq,
- end_pciasic_irq,
- NULL
+ .typename = "ASIC-PCI",
+ .startup = startup_pciasic_irq,
+ .shutdown = shutdown_pciasic_irq,
+ .enable = enable_pciasic_irq,
+ .disable = disable_pciasic_irq,
+ .ack = mask_and_ack_pciasic_irq,
+ .end = end_pciasic_irq,
};
/*
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 1b3f8a0..262c856 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -167,7 +167,7 @@
rtc_set_time = mc146818_set_rtc_mmss;
}
-static int __init sni_rm200_pci_setup(void)
+void __init plat_setup(void)
{
sni_pcimt_detect();
sni_pcimt_sc_init();
@@ -196,8 +196,4 @@
#ifdef CONFIG_PCI
register_pci_controller(&sni_controller);
#endif
-
- return 0;
}
-
-early_initcall(sni_rm200_pci_setup);
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
new file mode 100644
index 0000000..5fbbe12
--- /dev/null
+++ b/arch/mips/tx4927/Kconfig
@@ -0,0 +1,3 @@
+config TOSHIBA_FPCIB0
+ bool "FPCIB0 Backplane Support"
+ depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 26d7c53..77c3b66 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -64,7 +64,7 @@
}
-static void __init tx4927_setup(void)
+void __init plat_setup(void)
{
board_time_init = tx4927_time_init;
board_timer_setup = tx4927_timer_setup;
@@ -76,12 +76,8 @@
toshiba_rbtx4927_setup();
}
#endif
-
- return;
}
-early_initcall(tx4927_setup);
-
void __init tx4927_time_init(void)
{
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index fc07205..990fcb2 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -77,6 +77,11 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#endif
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
#undef TOSHIBA_RBTX4927_SETUP_DEBUG
@@ -920,12 +925,30 @@
#endif /* CONFIG_PCI */
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (char *)(0xff1ff300 + i * 0x100);
+ req.mapbase = 0xff1ff300 + i * 0x100;
+ req.irq = 32 + i;
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = 50000000;
+ early_serial_txx9_setup(&req);
+ }
+ }
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if (strstr(argptr, "console=") == NULL) {
strcat(argptr, " console=ttyS0,38400");
}
#endif
+#endif
#ifdef CONFIG_ROOT_NFS
argptr = prom_getcmdline();
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
new file mode 100644
index 0000000..d90e9cd
--- /dev/null
+++ b/arch/mips/tx4938/Kconfig
@@ -0,0 +1,24 @@
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+ prompt "PIO[58:61]"
+ default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+ bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+ bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+ bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+ depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+ bool "NAND Boot Support (EXPERIMENTAL)"
+ help
+ This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+ Select this option if you need to use NAND boot.
+
+endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
new file mode 100644
index 0000000..74c95c5
--- /dev/null
+++ b/arch/mips/tx4938/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y += prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o
+obj-$(CONFIG_KGDB) += dbgio.o
+
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c
new file mode 100644
index 0000000..bea59ff
--- /dev/null
+++ b/arch/mips/tx4938/common/dbgio.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/mips/tx4938/common/dbgio.c
+ *
+ * kgdb interface for gdb
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
+ */
+
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/tx4938_mips.h>
+
+extern u8 txx9_sio_kdbg_rd(void);
+extern int txx9_sio_kdbg_wr( u8 ch );
+
+u8 getDebugChar(void)
+{
+ return (txx9_sio_kdbg_rd());
+}
+
+int putDebugChar(u8 byte)
+{
+ return (txx9_sio_kdbg_wr(byte));
+}
+
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
new file mode 100644
index 0000000..4f90d7f
--- /dev/null
+++ b/arch/mips/tx4938/common/irq.c
@@ -0,0 +1,424 @@
+/*
+ * linux/arch/mps/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/**********************************************************************************/
+/* Forwad definitions for all pic's */
+/**********************************************************************************/
+
+static unsigned int tx4938_irq_cp0_startup(unsigned int irq);
+static void tx4938_irq_cp0_shutdown(unsigned int irq);
+static void tx4938_irq_cp0_enable(unsigned int irq);
+static void tx4938_irq_cp0_disable(unsigned int irq);
+static void tx4938_irq_cp0_mask_and_ack(unsigned int irq);
+static void tx4938_irq_cp0_end(unsigned int irq);
+
+static unsigned int tx4938_irq_pic_startup(unsigned int irq);
+static void tx4938_irq_pic_shutdown(unsigned int irq);
+static void tx4938_irq_pic_enable(unsigned int irq);
+static void tx4938_irq_pic_disable(unsigned int irq);
+static void tx4938_irq_pic_mask_and_ack(unsigned int irq);
+static void tx4938_irq_pic_end(unsigned int irq);
+
+/**********************************************************************************/
+/* Kernel structs for all pic's */
+/**********************************************************************************/
+DEFINE_SPINLOCK(tx4938_cp0_lock);
+DEFINE_SPINLOCK(tx4938_pic_lock);
+
+#define TX4938_CP0_NAME "TX4938-CP0"
+static struct hw_interrupt_type tx4938_irq_cp0_type = {
+ .typename = TX4938_CP0_NAME,
+ .startup = tx4938_irq_cp0_startup,
+ .shutdown = tx4938_irq_cp0_shutdown,
+ .enable = tx4938_irq_cp0_enable,
+ .disable = tx4938_irq_cp0_disable,
+ .ack = tx4938_irq_cp0_mask_and_ack,
+ .end = tx4938_irq_cp0_end,
+ .set_affinity = NULL
+};
+
+#define TX4938_PIC_NAME "TX4938-PIC"
+static struct hw_interrupt_type tx4938_irq_pic_type = {
+ .typename = TX4938_PIC_NAME,
+ .startup = tx4938_irq_pic_startup,
+ .shutdown = tx4938_irq_pic_shutdown,
+ .enable = tx4938_irq_pic_enable,
+ .disable = tx4938_irq_pic_disable,
+ .ack = tx4938_irq_pic_mask_and_ack,
+ .end = tx4938_irq_pic_end,
+ .set_affinity = NULL
+};
+
+static struct irqaction tx4938_irq_pic_action = {
+ .handler = no_action,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = TX4938_PIC_NAME
+};
+
+/**********************************************************************************/
+/* Functions for cp0 */
+/**********************************************************************************/
+
+#define tx4938_irq_cp0_mask(irq) ( 1 << ( irq-TX4938_IRQ_CP0_BEG+8 ) )
+
+static void __init
+tx4938_irq_cp0_init(void)
+{
+ int i;
+
+ for (i = TX4938_IRQ_CP0_BEG; i <= TX4938_IRQ_CP0_END; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &tx4938_irq_cp0_type;
+ }
+
+ return;
+}
+
+static unsigned int
+tx4938_irq_cp0_startup(unsigned int irq)
+{
+ tx4938_irq_cp0_enable(irq);
+
+ return (0);
+}
+
+static void
+tx4938_irq_cp0_shutdown(unsigned int irq)
+{
+ tx4938_irq_cp0_disable(irq);
+}
+
+static void
+tx4938_irq_cp0_enable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+ set_c0_status(tx4938_irq_cp0_mask(irq));
+
+ spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+}
+
+static void
+tx4938_irq_cp0_disable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+ clear_c0_status(tx4938_irq_cp0_mask(irq));
+
+ spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+
+ return;
+}
+
+static void
+tx4938_irq_cp0_mask_and_ack(unsigned int irq)
+{
+ tx4938_irq_cp0_disable(irq);
+
+ return;
+}
+
+static void
+tx4938_irq_cp0_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ tx4938_irq_cp0_enable(irq);
+ }
+
+ return;
+}
+
+/**********************************************************************************/
+/* Functions for pic */
+/**********************************************************************************/
+
+u32
+tx4938_irq_pic_addr(int irq)
+{
+ /* MVMCP -- need to formulize this */
+ irq -= TX4938_IRQ_PIC_BEG;
+
+ switch (irq) {
+ case 17:
+ case 16:
+ case 1:
+ case 0:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL0));
+ }
+ case 19:
+ case 18:
+ case 3:
+ case 2:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL1));
+ }
+ case 21:
+ case 20:
+ case 5:
+ case 4:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL2));
+ }
+ case 23:
+ case 22:
+ case 7:
+ case 6:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL3));
+ }
+ case 25:
+ case 24:
+ case 9:
+ case 8:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL4));
+ }
+ case 27:
+ case 26:
+ case 11:
+ case 10:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL5));
+ }
+ case 29:
+ case 28:
+ case 13:
+ case 12:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL6));
+ }
+ case 31:
+ case 30:
+ case 15:
+ case 14:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL7));
+ }
+ }
+
+ return (0);
+}
+
+u32
+tx4938_irq_pic_mask(int irq)
+{
+ /* MVMCP -- need to formulize this */
+ irq -= TX4938_IRQ_PIC_BEG;
+
+ switch (irq) {
+ case 31:
+ case 29:
+ case 27:
+ case 25:
+ case 23:
+ case 21:
+ case 19:
+ case 17:{
+ return (0x07000000);
+ }
+ case 30:
+ case 28:
+ case 26:
+ case 24:
+ case 22:
+ case 20:
+ case 18:
+ case 16:{
+ return (0x00070000);
+ }
+ case 15:
+ case 13:
+ case 11:
+ case 9:
+ case 7:
+ case 5:
+ case 3:
+ case 1:{
+ return (0x00000700);
+ }
+ case 14:
+ case 12:
+ case 10:
+ case 8:
+ case 6:
+ case 4:
+ case 2:
+ case 0:{
+ return (0x00000007);
+ }
+ }
+ return (0x00000000);
+}
+
+static void
+tx4938_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, unsigned set_bits)
+{
+ unsigned long val = 0;
+
+ val = TX4938_RD(pic_reg);
+ val &= (~clr_bits);
+ val |= (set_bits);
+ TX4938_WR(pic_reg, val);
+ mmiowb();
+ TX4938_RD(pic_reg);
+
+ return;
+}
+
+static void __init
+tx4938_irq_pic_init(void)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = TX4938_IRQ_PIC_BEG; i <= TX4938_IRQ_PIC_END; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 2;
+ irq_desc[i].handler = &tx4938_irq_pic_type;
+ }
+
+ setup_irq(TX4938_IRQ_NEST_PIC_ON_CP0, &tx4938_irq_pic_action);
+
+ spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+ TX4938_WR(0xff1ff640, 0x6); /* irq level mask -- only accept hightest */
+ TX4938_WR(0xff1ff600, TX4938_RD(0xff1ff600) | 0x1); /* irq enable */
+
+ spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+ return;
+}
+
+static unsigned int
+tx4938_irq_pic_startup(unsigned int irq)
+{
+ tx4938_irq_pic_enable(irq);
+
+ return (0);
+}
+
+static void
+tx4938_irq_pic_shutdown(unsigned int irq)
+{
+ tx4938_irq_pic_disable(irq);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_enable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+ tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), 0,
+ tx4938_irq_pic_mask(irq));
+
+ spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_disable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+ tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq),
+ tx4938_irq_pic_mask(irq), 0);
+
+ spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_mask_and_ack(unsigned int irq)
+{
+ tx4938_irq_pic_disable(irq);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ tx4938_irq_pic_enable(irq);
+ }
+
+ return;
+}
+
+/**********************************************************************************/
+/* Main init functions */
+/**********************************************************************************/
+
+void __init
+tx4938_irq_init(void)
+{
+ extern asmlinkage void tx4938_irq_handler(void);
+
+ tx4938_irq_cp0_init();
+ tx4938_irq_pic_init();
+ set_except_vector(0, tx4938_irq_handler);
+
+ return;
+}
+
+int
+tx4938_irq_nested(void)
+{
+ int sw_irq = 0;
+ u32 level2;
+
+ level2 = TX4938_RD(0xff1ff6a0);
+ if ((level2 & 0x10000) == 0) {
+ level2 &= 0x1f;
+ sw_irq = TX4938_IRQ_PIC_BEG + level2;
+ if (sw_irq == 26) {
+ {
+ extern int toshiba_rbtx4938_irq_nested(int sw_irq);
+ sw_irq = toshiba_rbtx4938_irq_nested(sw_irq);
+ }
+ }
+ }
+
+ wbflush();
+ return (sw_irq);
+}
diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S
new file mode 100644
index 0000000..1b2f72b
--- /dev/null
+++ b/arch/mips/tx4938/common/irq_handler.S
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/mips/tx4938/common/handler.S
+ *
+ * Primary interrupt handler for tx4938 based systems
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/tx4938/rbtx4938.h>
+
+
+ .align 5
+ NESTED(tx4938_irq_handler, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 t0, CP0_CAUSE
+ mfc0 t1, CP0_STATUS
+ and t0, t1
+
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_ip7
+
+ /* IP6..IP3 multiplexed -- do not use */
+
+ andi t1, t0, STATUSF_IP2 /* tx4938 pic */
+ bnez t1, ll_ip2
+
+ andi t1, t0, STATUSF_IP1 /* user line 1 */
+ bnez t1, ll_ip1
+
+ andi t1, t0, STATUSF_IP0 /* user line 0 */
+ bnez t1, ll_ip0
+
+ .set reorder
+
+ nop
+ END(tx4938_irq_handler)
+
+ .align 5
+
+
+ll_ip7:
+ li a0, TX4938_IRQ_CPU_TIMER
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+
+ll_ip2:
+ jal tx4938_irq_nested
+ nop
+ beqz v0, goto_spurious_interrupt
+ nop
+ move a0, v0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+goto_spurious_interrupt:
+ j ret_from_irq
+
+ll_ip1:
+ li a0, TX4938_IRQ_USER1
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_ip0:
+ li a0, TX4938_IRQ_USER0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
new file mode 100644
index 0000000..3189a65
--- /dev/null
+++ b/arch/mips/tx4938/common/prom.c
@@ -0,0 +1,129 @@
+/*
+ * linux/arch/mips/tx4938/common/prom.c
+ *
+ * common tx4938 memory interface
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+static unsigned int __init
+tx4938_process_sdccr(u64 * addr)
+{
+ u64 val;
+ unsigned int sdccr_ce;
+ unsigned int sdccr_rs;
+ unsigned int sdccr_cs;
+ unsigned int sdccr_mw;
+ unsigned int rs = 0;
+ unsigned int cs = 0;
+ unsigned int mw = 0;
+ unsigned int bc = 4;
+ unsigned int msize = 0;
+
+ val = (*((vu64 *) (addr)));
+
+ /* MVMCP -- need #defs for these bits masks */
+ sdccr_ce = ((val & (1 << 10)) >> 10);
+ sdccr_rs = ((val & (3 << 5)) >> 5);
+ sdccr_cs = ((val & (7 << 2)) >> 2);
+ sdccr_mw = ((val & (1 << 0)) >> 0);
+
+ if (sdccr_ce) {
+ switch (sdccr_rs) {
+ case 0:{
+ rs = 2048;
+ break;
+ }
+ case 1:{
+ rs = 4096;
+ break;
+ }
+ case 2:{
+ rs = 8192;
+ break;
+ }
+ default:{
+ rs = 0;
+ break;
+ }
+ }
+ switch (sdccr_cs) {
+ case 0:{
+ cs = 256;
+ break;
+ }
+ case 1:{
+ cs = 512;
+ break;
+ }
+ case 2:{
+ cs = 1024;
+ break;
+ }
+ case 3:{
+ cs = 2048;
+ break;
+ }
+ case 4:{
+ cs = 4096;
+ break;
+ }
+ default:{
+ cs = 0;
+ break;
+ }
+ }
+ switch (sdccr_mw) {
+ case 0:{
+ mw = 8;
+ break;
+ } /* 8 bytes = 64 bits */
+ case 1:{
+ mw = 4;
+ break;
+ } /* 4 bytes = 32 bits */
+ }
+ }
+
+ /* bytes per chip MB per chip bank count */
+ msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
+
+ /* MVMCP -- bc hard coded to 4 from table 9.3.1 */
+ /* boad supports bc=2 but no way to detect */
+
+ return (msize);
+}
+
+unsigned int __init
+tx4938_get_mem_size(void)
+{
+ unsigned int c0;
+ unsigned int c1;
+ unsigned int c2;
+ unsigned int c3;
+ unsigned int total;
+
+ /* MVMCP -- need #defs for these registers */
+ c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
+ c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
+ c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
+ c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
+ total = c0 + c1 + c2 + c3;
+
+ return (total);
+}
diff --git a/arch/mips/tx4938/common/rtc_rx5c348.c b/arch/mips/tx4938/common/rtc_rx5c348.c
new file mode 100644
index 0000000..d249edb
--- /dev/null
+++ b/arch/mips/tx4938/common/rtc_rx5c348.c
@@ -0,0 +1,202 @@
+/*
+ * RTC routines for RICOH Rx5C348 SPI chip.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/rtc.h>
+#include <linux/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/spi.h>
+
+#define EPOCH 2000
+
+/* registers */
+#define Rx5C348_REG_SECOND 0
+#define Rx5C348_REG_MINUTE 1
+#define Rx5C348_REG_HOUR 2
+#define Rx5C348_REG_WEEK 3
+#define Rx5C348_REG_DAY 4
+#define Rx5C348_REG_MONTH 5
+#define Rx5C348_REG_YEAR 6
+#define Rx5C348_REG_ADJUST 7
+#define Rx5C348_REG_ALARM_W_MIN 8
+#define Rx5C348_REG_ALARM_W_HOUR 9
+#define Rx5C348_REG_ALARM_W_WEEK 10
+#define Rx5C348_REG_ALARM_D_MIN 11
+#define Rx5C348_REG_ALARM_D_HOUR 12
+#define Rx5C348_REG_CTL1 14
+#define Rx5C348_REG_CTL2 15
+
+/* register bits */
+#define Rx5C348_BIT_PM 0x20 /* REG_HOUR */
+#define Rx5C348_BIT_Y2K 0x80 /* REG_MONTH */
+#define Rx5C348_BIT_24H 0x20 /* REG_CTL1 */
+#define Rx5C348_BIT_XSTP 0x10 /* REG_CTL2 */
+
+/* commands */
+#define Rx5C348_CMD_W(addr) (((addr) << 4) | 0x08) /* single write */
+#define Rx5C348_CMD_R(addr) (((addr) << 4) | 0x0c) /* single read */
+#define Rx5C348_CMD_MW(addr) (((addr) << 4) | 0x00) /* burst write */
+#define Rx5C348_CMD_MR(addr) (((addr) << 4) | 0x04) /* burst read */
+
+static struct spi_dev_desc srtc_dev_desc = {
+ .baud = 1000000, /* 1.0Mbps @ Vdd 2.0V */
+ .tcss = 31,
+ .tcsh = 1,
+ .tcsr = 62,
+ /* 31us for Tcss (62us for Tcsr) is required for carry operation) */
+ .byteorder = 1, /* MSB-First */
+ .polarity = 0, /* High-Active */
+ .phase = 1, /* Shift-Then-Sample */
+
+};
+static int srtc_chipid;
+static int srtc_24h;
+
+static inline int
+spi_rtc_io(unsigned char *inbuf, unsigned char *outbuf, unsigned int count)
+{
+ unsigned char *inbufs[1], *outbufs[1];
+ unsigned int incounts[2], outcounts[2];
+ inbufs[0] = inbuf;
+ incounts[0] = count;
+ incounts[1] = 0;
+ outbufs[0] = outbuf;
+ outcounts[0] = count;
+ outcounts[1] = 0;
+ return txx9_spi_io(srtc_chipid, &srtc_dev_desc,
+ inbufs, incounts, outbufs, outcounts, 0);
+}
+
+/*
+ * Conversion between binary and BCD.
+ */
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+/* RTC-dependent code for time.c */
+
+static int
+rtc_rx5c348_set_time(unsigned long t)
+{
+ unsigned char inbuf[8];
+ struct rtc_time tm;
+ u8 year, month, day, hour, minute, second, century;
+
+ /* convert */
+ to_tm(t, &tm);
+
+ year = tm.tm_year % 100;
+ month = tm.tm_mon+1; /* tm_mon starts from 0 to 11 */
+ day = tm.tm_mday;
+ hour = tm.tm_hour;
+ minute = tm.tm_min;
+ second = tm.tm_sec;
+ century = tm.tm_year / 100;
+
+ inbuf[0] = Rx5C348_CMD_MW(Rx5C348_REG_SECOND);
+ BIN_TO_BCD(second);
+ inbuf[1] = second;
+ BIN_TO_BCD(minute);
+ inbuf[2] = minute;
+
+ if (srtc_24h) {
+ BIN_TO_BCD(hour);
+ inbuf[3] = hour;
+ } else {
+ /* hour 0 is AM12, noon is PM12 */
+ inbuf[3] = 0;
+ if (hour >= 12)
+ inbuf[3] = Rx5C348_BIT_PM;
+ hour = (hour + 11) % 12 + 1;
+ BIN_TO_BCD(hour);
+ inbuf[3] |= hour;
+ }
+ inbuf[4] = 0; /* ignore week */
+ BIN_TO_BCD(day);
+ inbuf[5] = day;
+ BIN_TO_BCD(month);
+ inbuf[6] = month;
+ if (century >= 20)
+ inbuf[6] |= Rx5C348_BIT_Y2K;
+ BIN_TO_BCD(year);
+ inbuf[7] = year;
+ /* write in one transfer to avoid data inconsistency */
+ return spi_rtc_io(inbuf, NULL, 8);
+}
+
+static unsigned long
+rtc_rx5c348_get_time(void)
+{
+ unsigned char inbuf[8], outbuf[8];
+ unsigned int year, month, day, hour, minute, second;
+
+ inbuf[0] = Rx5C348_CMD_MR(Rx5C348_REG_SECOND);
+ memset(inbuf + 1, 0, 7);
+ /* read in one transfer to avoid data inconsistency */
+ if (spi_rtc_io(inbuf, outbuf, 8))
+ return 0;
+ second = outbuf[1];
+ BCD_TO_BIN(second);
+ minute = outbuf[2];
+ BCD_TO_BIN(minute);
+ if (srtc_24h) {
+ hour = outbuf[3];
+ BCD_TO_BIN(hour);
+ } else {
+ hour = outbuf[3] & ~Rx5C348_BIT_PM;
+ BCD_TO_BIN(hour);
+ hour %= 12;
+ if (outbuf[3] & Rx5C348_BIT_PM)
+ hour += 12;
+ }
+ day = outbuf[5];
+ BCD_TO_BIN(day);
+ month = outbuf[6] & ~Rx5C348_BIT_Y2K;
+ BCD_TO_BIN(month);
+ year = outbuf[7];
+ BCD_TO_BIN(year);
+ year += EPOCH;
+
+ return mktime(year, month, day, hour, minute, second);
+}
+
+void __init
+rtc_rx5c348_init(int chipid)
+{
+ unsigned char inbuf[2], outbuf[2];
+ srtc_chipid = chipid;
+ /* turn on RTC if it is not on */
+ inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL2);
+ inbuf[1] = 0;
+ spi_rtc_io(inbuf, outbuf, 2);
+ if (outbuf[1] & Rx5C348_BIT_XSTP) {
+ inbuf[0] = Rx5C348_CMD_W(Rx5C348_REG_CTL2);
+ inbuf[1] = 0;
+ spi_rtc_io(inbuf, NULL, 2);
+ }
+
+ inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL1);
+ inbuf[1] = 0;
+ spi_rtc_io(inbuf, outbuf, 2);
+ if (outbuf[1] & Rx5C348_BIT_24H)
+ srtc_24h = 1;
+
+ /* set the function pointers */
+ rtc_get_time = rtc_rx5c348_get_time;
+ rtc_set_time = rtc_rx5c348_set_time;
+}
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
new file mode 100644
index 0000000..fc99295
--- /dev/null
+++ b/arch/mips/tx4938/common/setup.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/mips/tx4938/common/setup.c
+ *
+ * common tx4938 setup routines
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/rbtx4938.h>
+
+extern void toshiba_rbtx4938_setup(void);
+extern void rbtx4938_time_init(void);
+
+void __init tx4938_setup(void);
+void __init tx4938_time_init(void);
+void __init tx4938_timer_setup(struct irqaction *irq);
+void dump_cp0(char *key);
+
+void (*__wbflush) (void);
+
+static void
+tx4938_write_buffer_flush(void)
+{
+ mmiowb();
+
+ __asm__ __volatile__(
+ ".set push\n\t"
+ ".set noreorder\n\t"
+ "lw $0,%0\n\t"
+ "nop\n\t"
+ ".set pop"
+ : /* no output */
+ : "m" (*(int *)KSEG1)
+ : "memory");
+}
+
+void __init
+plat_setup(void)
+{
+ board_time_init = tx4938_time_init;
+ board_timer_setup = tx4938_timer_setup;
+ __wbflush = tx4938_write_buffer_flush;
+ toshiba_rbtx4938_setup();
+}
+
+void __init
+tx4938_time_init(void)
+{
+ rbtx4938_time_init();
+}
+
+void __init
+tx4938_timer_setup(struct irqaction *irq)
+{
+ u32 count;
+ u32 c1;
+ u32 c2;
+
+ setup_irq(TX4938_IRQ_CPU_TIMER, irq);
+
+ c1 = read_c0_count();
+ count = c1 + (mips_hpt_frequency / HZ);
+ write_c0_compare(count);
+ c2 = read_c0_count();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
new file mode 100644
index 0000000..2269412
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y += prom.o setup.o irq.o spi_eeprom.o spi_txx9.o
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
new file mode 100644
index 0000000..230f5a9
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
@@ -0,0 +1,244 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+ *
+ * Toshiba RBTX4938 specific interrupt handlers
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+/*
+IRQ Device
+
+16 TX4938-CP0/00 Software 0
+17 TX4938-CP0/01 Software 1
+18 TX4938-CP0/02 Cascade TX4938-CP0
+19 TX4938-CP0/03 Multiplexed -- do not use
+20 TX4938-CP0/04 Multiplexed -- do not use
+21 TX4938-CP0/05 Multiplexed -- do not use
+22 TX4938-CP0/06 Multiplexed -- do not use
+23 TX4938-CP0/07 CPU TIMER
+
+24 TX4938-PIC/00
+25 TX4938-PIC/01
+26 TX4938-PIC/02 Cascade RBTX4938-IOC
+27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
+28 TX4938-PIC/04
+29 TX4938-PIC/05 TX4938 ETH1
+30 TX4938-PIC/06 TX4938 ETH0
+31 TX4938-PIC/07
+32 TX4938-PIC/08 TX4938 SIO 0
+33 TX4938-PIC/09 TX4938 SIO 1
+34 TX4938-PIC/10 TX4938 DMA0
+35 TX4938-PIC/11 TX4938 DMA1
+36 TX4938-PIC/12 TX4938 DMA2
+37 TX4938-PIC/13 TX4938 DMA3
+38 TX4938-PIC/14
+39 TX4938-PIC/15
+40 TX4938-PIC/16 TX4938 PCIC
+41 TX4938-PIC/17 TX4938 TMR0
+42 TX4938-PIC/18 TX4938 TMR1
+43 TX4938-PIC/19 TX4938 TMR2
+44 TX4938-PIC/20
+45 TX4938-PIC/21
+46 TX4938-PIC/22 TX4938 PCIERR
+47 TX4938-PIC/23
+48 TX4938-PIC/24
+49 TX4938-PIC/25
+50 TX4938-PIC/26
+51 TX4938-PIC/27
+52 TX4938-PIC/28
+53 TX4938-PIC/29
+54 TX4938-PIC/30
+55 TX4938-PIC/31 TX4938 SPI
+
+56 RBTX4938-IOC/00 PCI-D
+57 RBTX4938-IOC/01 PCI-C
+58 RBTX4938-IOC/02 PCI-B
+59 RBTX4938-IOC/03 PCI-A
+60 RBTX4938-IOC/04 RTC
+61 RBTX4938-IOC/05 ATA
+62 RBTX4938-IOC/06 MODEM
+63 RBTX4938-IOC/07 SWINT
+*/
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/version.h>
+#include <linux/bootmem.h>
+#include <asm/tx4938/rbtx4938.h>
+
+static unsigned int toshiba_rbtx4938_irq_ioc_startup(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_end(unsigned int irq);
+
+DEFINE_SPINLOCK(toshiba_rbtx4938_ioc_lock);
+
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct hw_interrupt_type toshiba_rbtx4938_irq_ioc_type = {
+ .typename = TOSHIBA_RBTX4938_IOC_NAME,
+ .startup = toshiba_rbtx4938_irq_ioc_startup,
+ .shutdown = toshiba_rbtx4938_irq_ioc_shutdown,
+ .enable = toshiba_rbtx4938_irq_ioc_enable,
+ .disable = toshiba_rbtx4938_irq_ioc_disable,
+ .ack = toshiba_rbtx4938_irq_ioc_mask_and_ack,
+ .end = toshiba_rbtx4938_irq_ioc_end,
+ .set_affinity = NULL
+};
+
+#define TOSHIBA_RBTX4938_IOC_INTR_ENAB 0xb7f02000
+#define TOSHIBA_RBTX4938_IOC_INTR_STAT 0xb7f0200a
+
+int
+toshiba_rbtx4938_irq_nested(int sw_irq)
+{
+ u8 level3;
+
+ level3 = reg_rd08(TOSHIBA_RBTX4938_IOC_INTR_STAT) & 0xff;
+ if (level3) {
+ /* must use fls so onboard ATA has priority */
+ sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
+ }
+
+ wbflush();
+ return sw_irq;
+}
+
+static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
+ .handler = no_action,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = TOSHIBA_RBTX4938_IOC_NAME,
+};
+
+/**********************************************************************************/
+/* Functions for ioc */
+/**********************************************************************************/
+static void __init
+toshiba_rbtx4938_irq_ioc_init(void)
+{
+ int i;
+
+ for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
+ i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 3;
+ irq_desc[i].handler = &toshiba_rbtx4938_irq_ioc_type;
+ }
+
+ setup_irq(RBTX4938_IRQ_IOCINT,
+ &toshiba_rbtx4938_irq_ioc_action);
+}
+
+static unsigned int
+toshiba_rbtx4938_irq_ioc_startup(unsigned int irq)
+{
+ toshiba_rbtx4938_irq_ioc_enable(irq);
+
+ return 0;
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq)
+{
+ toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+{
+ unsigned long flags;
+ volatile unsigned char v;
+
+ spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+ v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+ v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+ TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+ mmiowb();
+ TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+ spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+{
+ unsigned long flags;
+ volatile unsigned char v;
+
+ spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+ v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+ v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+ TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+ mmiowb();
+ TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+ spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq)
+{
+ toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ toshiba_rbtx4938_irq_ioc_enable(irq);
+ }
+}
+
+extern void __init txx9_spi_irqinit(int irc_irq);
+
+void __init arch_init_irq(void)
+{
+ extern void tx4938_irq_init(void);
+
+ /* Now, interrupt control disabled, */
+ /* all IRC interrupts are masked, */
+ /* all IRC interrupt mode are Low Active. */
+
+ /* mask all IOC interrupts */
+ *rbtx4938_imask_ptr = 0;
+
+ /* clear SoftInt interrupts */
+ *rbtx4938_softint_ptr = 0;
+ tx4938_irq_init();
+ toshiba_rbtx4938_irq_ioc_init();
+ /* Onboard 10M Ether: High Active */
+ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040);
+
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_SPI_SEL) {
+ txx9_spi_irqinit(RBTX4938_IRQ_IRC_SPI);
+ }
+
+ wbflush();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
new file mode 100644
index 0000000..7df8b32
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+ *
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+void __init prom_init_cmdline(void)
+{
+ int argc = (int) fw_arg0;
+ char **argv = (char **) fw_arg1;
+ int i;
+
+ /* ignore all built-in args if any f/w args given */
+ if (argc > 1) {
+ *arcs_cmdline = '\0';
+ }
+
+ for (i = 1; i < argc; i++) {
+ if (i != 1) {
+ strcat(arcs_cmdline, " ");
+ }
+ strcat(arcs_cmdline, argv[i]);
+ }
+}
+
+void __init prom_init(void)
+{
+ extern int tx4938_get_mem_size(void);
+ int msize;
+#ifndef CONFIG_TX4938_NAND_BOOT
+ prom_init_cmdline();
+#endif
+ mips_machgroup = MACH_GROUP_TOSHIBA;
+ mips_machtype = MACH_TOSHIBA_RBTX4938;
+
+ msize = tx4938_get_mem_size();
+ add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+
+ return;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+ return;
+}
+
+const char *get_system_type(void)
+{
+ return "Toshiba RBTX4938";
+}
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
new file mode 100644
index 0000000..9f1dcc8
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -0,0 +1,1035 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ *
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <asm/wbflush.h>
+#include <asm/reboot.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/rbtx4938.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
+
+extern void rbtx4938_time_init(void) __init;
+extern char * __init prom_getcmdline(void);
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
+
+/* These functions are used for rebooting or halting the machine*/
+extern void rbtx4938_machine_restart(char *command);
+extern void rbtx4938_machine_halt(void);
+extern void rbtx4938_machine_power_off(void);
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+unsigned long rbtx4938_ce_base[8];
+unsigned long rbtx4938_ce_size[8];
+int txboard_pci66_mode;
+static int tx4938_pcic_trdyto; /* default: disabled */
+static int tx4938_pcic_retryto; /* default: disabled */
+static int tx4938_ccfg_toeon = 1;
+
+struct tx4938_pcic_reg *pcicptrs[4] = {
+ tx4938_pcicptr /* default setting for TX4938 */
+};
+
+static struct {
+ unsigned long base;
+ unsigned long size;
+} phys_regions[16] __initdata;
+static int num_phys_regions __initdata;
+
+#define PHYS_REGION_MINSIZE 0x10000
+
+void rbtx4938_machine_halt(void)
+{
+ printk(KERN_NOTICE "System Halted\n");
+ local_irq_disable();
+
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void rbtx4938_machine_power_off(void)
+{
+ rbtx4938_machine_halt();
+ /* no return */
+}
+
+void rbtx4938_machine_restart(char *command)
+{
+ local_irq_disable();
+
+ printk("Rebooting...");
+ *rbtx4938_softresetlock_ptr = 1;
+ *rbtx4938_sfvol_ptr = 1;
+ *rbtx4938_softreset_ptr = 1;
+ wbflush();
+
+ while(1);
+}
+
+void __init
+txboard_add_phys_region(unsigned long base, unsigned long size)
+{
+ if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
+ printk("phys_region overflow\n");
+ return;
+ }
+ phys_regions[num_phys_regions].base = base;
+ phys_regions[num_phys_regions].size = size;
+ num_phys_regions++;
+}
+unsigned long __init
+txboard_find_free_phys_region(unsigned long begin, unsigned long end,
+ unsigned long size)
+{
+ unsigned long base;
+ int i;
+
+ for (base = begin / size * size; base < end; base += size) {
+ for (i = 0; i < num_phys_regions; i++) {
+ if (phys_regions[i].size &&
+ base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
+ base + (size - 1) >= phys_regions[i].base)
+ break;
+ }
+ if (i == num_phys_regions)
+ return base;
+ }
+ return 0;
+}
+unsigned long __init
+txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
+ unsigned long *size)
+{
+ unsigned long sz, base;
+ for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
+ base = txboard_find_free_phys_region(begin, end, sz);
+ if (base) {
+ *size = sz;
+ return base;
+ }
+ }
+ return 0;
+}
+unsigned long __init
+txboard_request_phys_region_range(unsigned long begin, unsigned long end,
+ unsigned long size)
+{
+ unsigned long base;
+ base = txboard_find_free_phys_region(begin, end, size);
+ if (base)
+ txboard_add_phys_region(base, size);
+ return base;
+}
+unsigned long __init
+txboard_request_phys_region(unsigned long size)
+{
+ unsigned long base;
+ unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
+ base = txboard_find_free_phys_region(begin, end, size);
+ if (base)
+ txboard_add_phys_region(base, size);
+ return base;
+}
+unsigned long __init
+txboard_request_phys_region_shrink(unsigned long *size)
+{
+ unsigned long base;
+ unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
+ base = txboard_find_free_phys_region_shrink(begin, end, size);
+ if (base)
+ txboard_add_phys_region(base, *size);
+ return base;
+}
+
+#ifdef CONFIG_PCI
+void __init
+tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
+ struct pci_controller *channel,
+ unsigned long pci_io_base,
+ int extarb)
+{
+ int i;
+
+ /* Disable All Initiator Space */
+ pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
+ TX4938_PCIC_PCICCFG_G2PMEN(1)|
+ TX4938_PCIC_PCICCFG_G2PMEN(2)|
+ TX4938_PCIC_PCICCFG_G2PIOEN);
+
+ /* GB->PCI mappings */
+ pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
+ pcicptr->g2piogbase = pci_io_base |
+#ifdef __BIG_ENDIAN
+ TX4938_PCIC_G2PIOGBASE_ECHG
+#else
+ TX4938_PCIC_G2PIOGBASE_BSDIS
+#endif
+ ;
+ pcicptr->g2piopbase = 0;
+ for (i = 0; i < 3; i++) {
+ pcicptr->g2pmmask[i] = 0;
+ pcicptr->g2pmgbase[i] = 0;
+ pcicptr->g2pmpbase[i] = 0;
+ }
+ if (channel->mem_resource->end) {
+ pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
+ pcicptr->g2pmgbase[0] = channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+ TX4938_PCIC_G2PMnGBASE_ECHG
+#else
+ TX4938_PCIC_G2PMnGBASE_BSDIS
+#endif
+ ;
+ pcicptr->g2pmpbase[0] = channel->mem_resource->start;
+ }
+ /* PCI->GB mappings (I/O 256B) */
+ pcicptr->p2giopbase = 0; /* 256B */
+ pcicptr->p2giogbase = 0;
+ /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+ pcicptr->p2gm0plbase = 0;
+ pcicptr->p2gm0pubase = 0;
+ pcicptr->p2gmgbase[0] = 0 |
+ TX4938_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+ TX4938_PCIC_P2GMnGBASE_TECHG
+#else
+ TX4938_PCIC_P2GMnGBASE_TBSDIS
+#endif
+ ;
+ /* PCI->GB mappings (MEM 16MB) */
+ pcicptr->p2gm1plbase = 0xffffffff;
+ pcicptr->p2gm1pubase = 0xffffffff;
+ pcicptr->p2gmgbase[1] = 0;
+ /* PCI->GB mappings (MEM 1MB) */
+ pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
+ pcicptr->p2gmgbase[2] = 0;
+
+ pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
+ /* Enable Initiator Memory Space */
+ if (channel->mem_resource->end)
+ pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
+ /* Enable Initiator I/O Space */
+ if (channel->io_resource->end)
+ pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
+ /* Enable Initiator Config */
+ pcicptr->pciccfg |=
+ TX4938_PCIC_PCICCFG_ICAEN |
+ TX4938_PCIC_PCICCFG_TCAR;
+
+ /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+ pcicptr->pcicfg1 = 0;
+
+ pcicptr->g2ptocnt &= ~0xffff;
+
+ if (tx4938_pcic_trdyto >= 0) {
+ pcicptr->g2ptocnt &= ~0xff;
+ pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
+ }
+
+ if (tx4938_pcic_retryto >= 0) {
+ pcicptr->g2ptocnt &= ~0xff00;
+ pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
+ }
+
+ /* Clear All Local Bus Status */
+ pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
+ /* Enable All Local Bus Interrupts */
+ pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
+ /* Clear All Initiator Status */
+ pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
+ /* Enable All Initiator Interrupts */
+ pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
+ /* Clear All PCI Status Error */
+ pcicptr->pcistatus =
+ (pcicptr->pcistatus & 0x0000ffff) |
+ (TX4938_PCIC_PCISTATUS_ALL << 16);
+ /* Enable All PCI Status Error Interrupts */
+ pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
+
+ if (!extarb) {
+ /* Reset Bus Arbiter */
+ pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
+ pcicptr->pbabm = 0;
+ /* Enable Bus Arbiter */
+ pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
+ }
+
+ /* PCIC Int => IRC IRQ16 */
+ pcicptr->pcicfg2 =
+ (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
+
+ pcicptr->pcistatus = PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+}
+
+int __init
+tx4938_report_pciclk(void)
+{
+ unsigned long pcode = TX4938_REV_PCODE();
+ int pciclk = 0;
+ printk("TX%lx PCIC --%s PCICLK:",
+ pcode,
+ (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+
+ switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
+ case TX4938_CCFG_PCIDIVMODE_4:
+ pciclk = txx9_cpu_clock / 4; break;
+ case TX4938_CCFG_PCIDIVMODE_4_5:
+ pciclk = txx9_cpu_clock * 2 / 9; break;
+ case TX4938_CCFG_PCIDIVMODE_5:
+ pciclk = txx9_cpu_clock / 5; break;
+ case TX4938_CCFG_PCIDIVMODE_5_5:
+ pciclk = txx9_cpu_clock * 2 / 11; break;
+ case TX4938_CCFG_PCIDIVMODE_8:
+ pciclk = txx9_cpu_clock / 8; break;
+ case TX4938_CCFG_PCIDIVMODE_9:
+ pciclk = txx9_cpu_clock / 9; break;
+ case TX4938_CCFG_PCIDIVMODE_10:
+ pciclk = txx9_cpu_clock / 10; break;
+ case TX4938_CCFG_PCIDIVMODE_11:
+ pciclk = txx9_cpu_clock / 11; break;
+ }
+ printk("Internal(%dMHz)", pciclk / 1000000);
+ } else {
+ printk("External");
+ pciclk = -1;
+ }
+ printk("\n");
+ return pciclk;
+}
+
+void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
+{
+ pcicptrs[ch] = pcicptr;
+}
+
+struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
+{
+ return pcicptrs[ch];
+}
+
+static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
+ int top_bus, int busnr, int devfn)
+{
+ static struct pci_dev dev;
+ static struct pci_bus bus;
+
+ dev.sysdata = (void *)hose;
+ dev.devfn = devfn;
+ bus.number = busnr;
+ bus.ops = hose->pci_ops;
+ bus.parent = NULL;
+ dev.bus = &bus;
+
+ return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+static int early_##rw##_config_##size(struct pci_controller *hose, \
+ int top_bus, int bus, int devfn, int offset, type value) \
+{ \
+ return pci_##rw##_config_##size( \
+ fake_pci_dev(hose, top_bus, bus, devfn), \
+ offset, value); \
+}
+
+EARLY_PCI_OP(read, word, u16 *)
+
+int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
+{
+ u32 pci_devfn;
+ unsigned short vid;
+ int devfn_start = 0;
+ int devfn_stop = 0xff;
+ int cap66 = -1;
+ u16 stat;
+
+ printk("PCI: Checking 66MHz capabilities...\n");
+
+ for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
+ early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+ PCI_VENDOR_ID, &vid);
+
+ if (vid == 0xffff) continue;
+
+ /* check 66MHz capability */
+ if (cap66 < 0)
+ cap66 = 1;
+ if (cap66) {
+ early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+ PCI_STATUS, &stat);
+ if (!(stat & PCI_STATUS_66MHZ)) {
+ printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
+ current_bus, pci_devfn);
+ cap66 = 0;
+ break;
+ }
+ }
+ }
+ return cap66 > 0;
+}
+
+int __init
+tx4938_pciclk66_setup(void)
+{
+ int pciclk;
+
+ /* Assert M66EN */
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
+ /* Double PCICLK (if possible) */
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+ unsigned int pcidivmode =
+ tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
+ switch (pcidivmode) {
+ case TX4938_CCFG_PCIDIVMODE_8:
+ case TX4938_CCFG_PCIDIVMODE_4:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+ pciclk = txx9_cpu_clock / 4;
+ break;
+ case TX4938_CCFG_PCIDIVMODE_9:
+ case TX4938_CCFG_PCIDIVMODE_4_5:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+ pciclk = txx9_cpu_clock * 2 / 9;
+ break;
+ case TX4938_CCFG_PCIDIVMODE_10:
+ case TX4938_CCFG_PCIDIVMODE_5:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+ pciclk = txx9_cpu_clock / 5;
+ break;
+ case TX4938_CCFG_PCIDIVMODE_11:
+ case TX4938_CCFG_PCIDIVMODE_5_5:
+ default:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+ pciclk = txx9_cpu_clock * 2 / 11;
+ break;
+ }
+ tx4938_ccfgptr->ccfg =
+ (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
+ | pcidivmode;
+ printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+ (unsigned long)tx4938_ccfgptr->ccfg);
+ } else {
+ pciclk = -1;
+ }
+ return pciclk;
+}
+
+extern struct pci_controller tx4938_pci_controller[];
+static int __init tx4938_pcibios_init(void)
+{
+ unsigned long mem_base[2];
+ unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0,TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
+ unsigned long io_base[2];
+ unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0,TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
+ /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
+ int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
+
+ PCIBIOS_MIN_IO = 0x00001000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
+ io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
+
+ printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+ (unsigned short)(tx4938_pcicptr->pciid >> 16),
+ (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
+ (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
+ extarb ? "External" : "Internal");
+
+ /* setup PCI area */
+ tx4938_pci_controller[0].io_resource->start = io_base[0];
+ tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
+ tx4938_pci_controller[0].mem_resource->start = mem_base[0];
+ tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
+
+ set_tx4938_pcicptr(0, tx4938_pcicptr);
+
+ register_pci_controller(&tx4938_pci_controller[0]);
+
+ if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
+ printk("TX4938_CCFG_PCI66 already configured\n");
+ txboard_pci66_mode = -1; /* already configured */
+ }
+
+ /* Reset PCI Bus */
+ *rbtx4938_pcireset_ptr = 0;
+ /* Reset PCIC */
+ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+ if (txboard_pci66_mode > 0)
+ tx4938_pciclk66_setup();
+ mdelay(10);
+ /* clear PCIC reset */
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+ *rbtx4938_pcireset_ptr = 1;
+ wbflush();
+ tx4938_report_pcic_status1(tx4938_pcicptr);
+
+ tx4938_report_pciclk();
+ tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+ if (txboard_pci66_mode == 0 &&
+ txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
+ /* Reset PCI Bus */
+ *rbtx4938_pcireset_ptr = 0;
+ /* Reset PCIC */
+ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+ tx4938_pciclk66_setup();
+ mdelay(10);
+ /* clear PCIC reset */
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+ *rbtx4938_pcireset_ptr = 1;
+ wbflush();
+ /* Reinitialize PCIC */
+ tx4938_report_pciclk();
+ tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+ }
+
+ mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
+ io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
+ /* Reset PCIC1 */
+ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
+ /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+ if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
+ else
+ tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
+ mdelay(10);
+ /* clear PCIC1 reset */
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+ tx4938_report_pcic_status1(tx4938_pcic1ptr);
+
+ printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
+ (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
+ (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
+ (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
+ printk("%s PCICLK:%dMHz\n",
+ (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
+ txx9_gbus_clock /
+ ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
+ 1000000);
+
+ /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
+ tx4938_pci_controller[1].io_resource->start =
+ io_base[1] - io_base[0];
+ tx4938_pci_controller[1].io_resource->end =
+ io_base[1] - io_base[0] + io_size[1] - 1;
+ tx4938_pci_controller[1].mem_resource->start = mem_base[1];
+ tx4938_pci_controller[1].mem_resource->end =
+ mem_base[1] + mem_size[1] - 1;
+ set_tx4938_pcicptr(1, tx4938_pcic1ptr);
+
+ register_pci_controller(&tx4938_pci_controller[1]);
+
+ tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
+
+ /* map ioport 0 to PCI I/O space address 0 */
+ set_io_port_base(KSEG1 + io_base[0]);
+
+ return 0;
+}
+
+arch_initcall(tx4938_pcibios_init);
+
+#endif /* CONFIG_PCI */
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define SEEPROM1_CS 7 /* PIO7 */
+#define SEEPROM2_CS 0 /* IOC */
+#define SEEPROM3_CS 1 /* IOC */
+#define SRTC_CS 2 /* IOC */
+
+static int rbtx4938_spi_cs_func(int chipid, int on)
+{
+ unsigned char bit;
+ switch (chipid) {
+ case RBTX4938_SEEPROM1_CHIPID:
+ if (on)
+ tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS);
+ else
+ tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+ return 0;
+ break;
+ case RBTX4938_SEEPROM2_CHIPID:
+ bit = (1 << SEEPROM2_CS);
+ break;
+ case RBTX4938_SEEPROM3_CHIPID:
+ bit = (1 << SEEPROM3_CS);
+ break;
+ case RBTX4938_SRTC_CHIPID:
+ bit = (1 << SRTC_CS);
+ break;
+ default:
+ return -ENODEV;
+ }
+ /* bit1,2,4 are low active, bit3 is high active */
+ *rbtx4938_spics_ptr =
+ (*rbtx4938_spics_ptr & ~bit) |
+ ((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit);
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
+
+int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr)
+{
+ struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata;
+ static unsigned char dat[17];
+ static int read_dat = 0;
+ int ch = 0;
+
+ if (channel != &tx4938_pci_controller[1])
+ return -ENODEV;
+ /* TX4938 PCIC1 */
+ switch (PCI_SLOT(dev->devfn)) {
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+ ch = 0;
+ break;
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+ ch = 1;
+ break;
+ default:
+ return -ENODEV;
+ }
+ if (!read_dat) {
+ unsigned char sum;
+ int i;
+ read_dat = 1;
+ /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+ if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID,
+ 0, dat, sizeof(dat))) {
+ printk(KERN_ERR "seeprom: read error.\n");
+ } else {
+ if (strcmp(dat, "MAC") != 0)
+ printk(KERN_WARNING "seeprom: bad signature.\n");
+ for (i = 0, sum = 0; i < sizeof(dat); i++)
+ sum += dat[i];
+ if (sum)
+ printk(KERN_WARNING "seeprom: bad checksum.\n");
+ }
+ }
+ memcpy(addr, &dat[4 + 6 * ch], 6);
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on));
+static void __init rbtx4938_spi_setup(void)
+{
+ /* set SPI_SEL */
+ tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
+ /* chip selects for SPI devices */
+ tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+ tx4938_pioptr->dir |= (1 << SEEPROM1_CS);
+ txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func);
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static char pcode_str[8];
+static struct resource tx4938_reg_resource = {
+ pcode_str, TX4938_REG_BASE, TX4938_REG_BASE+TX4938_REG_SIZE, IORESOURCE_MEM
+};
+
+void __init tx4938_board_setup(void)
+{
+ int i;
+ unsigned long divmode;
+ int cpuclk = 0;
+ unsigned long pcode = TX4938_REV_PCODE();
+
+ ioport_resource.start = 0x1000;
+ ioport_resource.end = 0xffffffff;
+ iomem_resource.start = 0x1000;
+ iomem_resource.end = 0xffffffff; /* expand to 4GB */
+
+ sprintf(pcode_str, "TX%lx", pcode);
+ /* SDRAMC,EBUSC are configured by PROM */
+ for (i = 0; i < 8; i++) {
+ if (!(tx4938_ebuscptr->cr[i] & 0x8))
+ continue; /* disabled */
+ rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
+ txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
+ }
+
+ /* clocks */
+ if (txx9_master_clock) {
+ /* calculate gbus_clock and cpu_clock from master_clock */
+ divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_8:
+ case TX4938_CCFG_DIVMODE_10:
+ case TX4938_CCFG_DIVMODE_12:
+ case TX4938_CCFG_DIVMODE_16:
+ case TX4938_CCFG_DIVMODE_18:
+ txx9_gbus_clock = txx9_master_clock * 4; break;
+ default:
+ txx9_gbus_clock = txx9_master_clock;
+ }
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_2:
+ case TX4938_CCFG_DIVMODE_8:
+ cpuclk = txx9_gbus_clock * 2; break;
+ case TX4938_CCFG_DIVMODE_2_5:
+ case TX4938_CCFG_DIVMODE_10:
+ cpuclk = txx9_gbus_clock * 5 / 2; break;
+ case TX4938_CCFG_DIVMODE_3:
+ case TX4938_CCFG_DIVMODE_12:
+ cpuclk = txx9_gbus_clock * 3; break;
+ case TX4938_CCFG_DIVMODE_4:
+ case TX4938_CCFG_DIVMODE_16:
+ cpuclk = txx9_gbus_clock * 4; break;
+ case TX4938_CCFG_DIVMODE_4_5:
+ case TX4938_CCFG_DIVMODE_18:
+ cpuclk = txx9_gbus_clock * 9 / 2; break;
+ }
+ txx9_cpu_clock = cpuclk;
+ } else {
+ if (txx9_cpu_clock == 0) {
+ txx9_cpu_clock = 300000000; /* 300MHz */
+ }
+ /* calculate gbus_clock and master_clock from cpu_clock */
+ cpuclk = txx9_cpu_clock;
+ divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_2:
+ case TX4938_CCFG_DIVMODE_8:
+ txx9_gbus_clock = cpuclk / 2; break;
+ case TX4938_CCFG_DIVMODE_2_5:
+ case TX4938_CCFG_DIVMODE_10:
+ txx9_gbus_clock = cpuclk * 2 / 5; break;
+ case TX4938_CCFG_DIVMODE_3:
+ case TX4938_CCFG_DIVMODE_12:
+ txx9_gbus_clock = cpuclk / 3; break;
+ case TX4938_CCFG_DIVMODE_4:
+ case TX4938_CCFG_DIVMODE_16:
+ txx9_gbus_clock = cpuclk / 4; break;
+ case TX4938_CCFG_DIVMODE_4_5:
+ case TX4938_CCFG_DIVMODE_18:
+ txx9_gbus_clock = cpuclk * 2 / 9; break;
+ }
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_8:
+ case TX4938_CCFG_DIVMODE_10:
+ case TX4938_CCFG_DIVMODE_12:
+ case TX4938_CCFG_DIVMODE_16:
+ case TX4938_CCFG_DIVMODE_18:
+ txx9_master_clock = txx9_gbus_clock / 4; break;
+ default:
+ txx9_master_clock = txx9_gbus_clock;
+ }
+ }
+ /* change default value to udelay/mdelay take reasonable time */
+ loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+ /* CCFG */
+ /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
+ /* clear PCIC1 reset */
+ if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+
+ /* enable Timeout BusError */
+ if (tx4938_ccfg_toeon)
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
+
+ /* DMA selection */
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
+
+ /* Use external clock for external arbiter */
+ if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
+
+ printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
+ pcode_str,
+ cpuclk / 1000000, txx9_master_clock / 1000000,
+ (unsigned long)tx4938_ccfgptr->crir,
+ tx4938_ccfgptr->ccfg,
+ tx4938_ccfgptr->pcfg);
+
+ printk("%s SDRAMC --", pcode_str);
+ for (i = 0; i < 4; i++) {
+ unsigned long long cr = tx4938_sdramcptr->cr[i];
+ unsigned long ram_base, ram_size;
+ if (!((unsigned long)cr & 0x00000400))
+ continue; /* disabled */
+ ram_base = (unsigned long)(cr >> 49) << 21;
+ ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
+ if (ram_base >= 0x20000000)
+ continue; /* high memory (ignore) */
+ printk(" CR%d:%016Lx", i, cr);
+ txboard_add_phys_region(ram_base, ram_size);
+ }
+ printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
+
+ /* SRAM */
+ if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
+ unsigned int size = 0x800;
+ unsigned long base =
+ (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
+ txboard_add_phys_region(base, size);
+ }
+
+ /* IRC */
+ /* disable interrupt control */
+ tx4938_ircptr->cer = 0;
+
+ /* TMR */
+ /* disable all timers */
+ for (i = 0; i < TX4938_NR_TMR; i++) {
+ tx4938_tmrptr(i)->tcr = 0x00000020;
+ tx4938_tmrptr(i)->tisr = 0;
+ tx4938_tmrptr(i)->cpra = 0xffffffff;
+ tx4938_tmrptr(i)->itmr = 0;
+ tx4938_tmrptr(i)->ccdr = 0;
+ tx4938_tmrptr(i)->pgmr = 0;
+ }
+
+ /* enable DMA */
+ TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
+ TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN);
+
+ /* PIO */
+ tx4938_pioptr->maskcpu = 0;
+ tx4938_pioptr->maskext = 0;
+
+ /* TX4938 internal registers */
+ if (request_resource(&iomem_resource, &tx4938_reg_resource))
+ printk("request resource for internal registers failed\n");
+}
+
+#ifdef CONFIG_PCI
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
+{
+ unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
+ unsigned long g2pstatus = pcicptr->g2pstatus;
+ unsigned long pcicstatus = pcicptr->pcicstatus;
+ static struct {
+ unsigned long flag;
+ const char *str;
+ } pcistat_tbl[] = {
+ { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" },
+ { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" },
+ { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" },
+ { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" },
+ { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" },
+ { PCI_STATUS_PARITY, "MasterParityError" },
+ }, g2pstat_tbl[] = {
+ { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" },
+ { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" },
+ }, pcicstat_tbl[] = {
+ { TX4938_PCIC_PCICSTATUS_PME, "PME" },
+ { TX4938_PCIC_PCICSTATUS_TLB, "TLB" },
+ { TX4938_PCIC_PCICSTATUS_NIB, "NIB" },
+ { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" },
+ { TX4938_PCIC_PCICSTATUS_PERR, "PERR" },
+ { TX4938_PCIC_PCICSTATUS_SERR, "SERR" },
+ { TX4938_PCIC_PCICSTATUS_GBE, "GBE" },
+ { TX4938_PCIC_PCICSTATUS_IWB, "IWB" },
+ };
+ int i;
+
+ printk("pcistat:%04x(", pcistatus);
+ for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+ if (pcistatus & pcistat_tbl[i].flag)
+ printk("%s ", pcistat_tbl[i].str);
+ printk("), g2pstatus:%08lx(", g2pstatus);
+ for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+ if (g2pstatus & g2pstat_tbl[i].flag)
+ printk("%s ", g2pstat_tbl[i].str);
+ printk("), pcicstatus:%08lx(", pcicstatus);
+ for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+ if (pcicstatus & pcicstat_tbl[i].flag)
+ printk("%s ", pcicstat_tbl[i].str);
+ printk(")\n");
+}
+
+void tx4938_report_pcic_status(void)
+{
+ int i;
+ struct tx4938_pcic_reg *pcicptr;
+ for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
+ tx4938_report_pcic_status1(pcicptr);
+}
+
+#endif /* CONFIG_PCI */
+
+/* We use onchip r4k counter or TMR timer as our system wide timer
+ * interrupt running at 100HZ. */
+
+extern void __init rtc_rx5c348_init(int chipid);
+void __init rbtx4938_time_init(void)
+{
+ rtc_rx5c348_init(RBTX4938_SRTC_CHIPID);
+ mips_hpt_frequency = txx9_cpu_clock / 2;
+}
+
+void __init toshiba_rbtx4938_setup(void)
+{
+ unsigned long long pcfg;
+ char *argptr;
+
+ iomem_resource.end = 0xffffffff; /* 4GB */
+
+ if (txx9_master_clock == 0)
+ txx9_master_clock = 25000000; /* 25MHz */
+ tx4938_board_setup();
+ /* setup irq stuff */
+ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000); /* irq trigger */
+ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000); /* irq trigger */
+ /* setup serial stuff */
+ TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */
+ TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */
+
+#ifndef CONFIG_PCI
+ set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (char *)(0xff1ff300 + i * 0x100);
+ req.mapbase = 0xff1ff300 + i * 0x100;
+ req.irq = 32 + i;
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = 50000000;
+ early_serial_txx9_setup(&req);
+ }
+ }
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+ argptr = prom_getcmdline();
+ if (strstr(argptr, "console=") == NULL) {
+ strcat(argptr, " console=ttyS0,38400");
+ }
+#endif
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+ printk("PIOSEL: disabling both ata and nand selection\n");
+ local_irq_disable();
+ tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+ printk("PIOSEL: enabling nand selection\n");
+ tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+ printk("PIOSEL: enabling ata selection\n");
+ tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
+#endif
+
+#ifdef CONFIG_IP_PNP
+ argptr = prom_getcmdline();
+ if (strstr(argptr, "ip=") == NULL) {
+ strcat(argptr, " ip=any");
+ }
+#endif
+
+
+#ifdef CONFIG_FB
+ {
+ conswitchp = &dummy_con;
+ }
+#endif
+
+ rbtx4938_spi_setup();
+ pcfg = tx4938_ccfgptr->pcfg; /* updated */
+ /* fixup piosel */
+ if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+ TX4938_PCFG_ATA_SEL) {
+ *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04;
+ }
+ else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+ TX4938_PCFG_NDF_SEL) {
+ *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08;
+ }
+ else {
+ *rbtx4938_piosel_ptr &= ~(0x08 | 0x04);
+ }
+
+ rbtx4938_fpga_resource.name = "FPGA Registers";
+ rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+ rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+ rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+ printk("request resource for fpga failed\n");
+
+ /* disable all OnBoard I/O interrupts */
+ *rbtx4938_imask_ptr = 0;
+
+ _machine_restart = rbtx4938_machine_restart;
+ _machine_halt = rbtx4938_machine_halt;
+ _machine_power_off = rbtx4938_machine_power_off;
+
+ *rbtx4938_led_ptr = 0xff;
+ printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
+ printk(" DIPSW:%02x,%02x\n",
+ *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr);
+}
+
+#ifdef CONFIG_PROC_FS
+extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid);
+static int __init tx4938_spi_proc_setup(void)
+{
+ struct proc_dir_entry *tx4938_spi_eeprom_dir;
+
+ tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0);
+
+ if (!tx4938_spi_eeprom_dir)
+ return -ENOMEM;
+
+ /* don't allow user access to RBTX4938_SEEPROM1_CHIPID
+ * as it contains eth0 and eth1 MAC addresses
+ */
+ spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID);
+ spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID);
+
+ return 0;
+}
+
+__initcall(tx4938_spi_proc_setup);
+#endif
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
new file mode 100644
index 0000000..951a208
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+/* ATMEL 250x0 instructions */
+#define ATMEL_WREN 0x06
+#define ATMEL_WRDI 0x04
+#define ATMEL_RDSR 0x05
+#define ATMEL_WRSR 0x01
+#define ATMEL_READ 0x03
+#define ATMEL_WRITE 0x02
+
+#define ATMEL_SR_BSY 0x01
+#define ATMEL_SR_WEN 0x02
+#define ATMEL_SR_BP0 0x04
+#define ATMEL_SR_BP1 0x08
+
+DEFINE_SPINLOCK(spi_eeprom_lock);
+
+static struct spi_dev_desc seeprom_dev_desc = {
+ .baud = 1500000, /* 1.5Mbps */
+ .tcss = 1,
+ .tcsh = 1,
+ .tcsr = 1,
+ .byteorder = 1, /* MSB-First */
+ .polarity = 0, /* High-Active */
+ .phase = 0, /* Sample-Then-Shift */
+
+};
+static inline int
+spi_eeprom_io(int chipid,
+ unsigned char **inbufs, unsigned int *incounts,
+ unsigned char **outbufs, unsigned int *outcounts)
+{
+ return txx9_spi_io(chipid, &seeprom_dev_desc,
+ inbufs, incounts, outbufs, outcounts, 0);
+}
+
+int spi_eeprom_write_enable(int chipid, int enable)
+{
+ unsigned char inbuf[1];
+ unsigned char *inbufs[1];
+ unsigned int incounts[2];
+ unsigned long flags;
+ int stat;
+ inbuf[0] = enable ? ATMEL_WREN : ATMEL_WRDI;
+ inbufs[0] = inbuf;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = 0;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+static int spi_eeprom_read_status_nolock(int chipid)
+{
+ unsigned char inbuf[2], outbuf[2];
+ unsigned char *inbufs[1], *outbufs[1];
+ unsigned int incounts[2], outcounts[2];
+ int stat;
+ inbuf[0] = ATMEL_RDSR;
+ inbuf[1] = 0;
+ inbufs[0] = inbuf;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = 0;
+ outbufs[0] = outbuf;
+ outcounts[0] = sizeof(outbuf);
+ outcounts[1] = 0;
+ stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+ if (stat < 0)
+ return stat;
+ return outbuf[1];
+}
+
+int spi_eeprom_read_status(int chipid)
+{
+ unsigned long flags;
+ int stat;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_read_status_nolock(chipid);
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len)
+{
+ unsigned char inbuf[2];
+ unsigned char *inbufs[2], *outbufs[2];
+ unsigned int incounts[2], outcounts[3];
+ unsigned long flags;
+ int stat;
+ inbuf[0] = ATMEL_READ;
+ inbuf[1] = address;
+ inbufs[0] = inbuf;
+ inbufs[1] = NULL;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = 0;
+ outbufs[0] = NULL;
+ outbufs[1] = buf;
+ outcounts[0] = 2;
+ outcounts[1] = len;
+ outcounts[2] = 0;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len)
+{
+ unsigned char inbuf[2];
+ unsigned char *inbufs[2];
+ unsigned int incounts[3];
+ unsigned long flags;
+ int i, stat;
+
+ if (address / 8 != (address + len - 1) / 8)
+ return -EINVAL;
+ stat = spi_eeprom_write_enable(chipid, 1);
+ if (stat < 0)
+ return stat;
+ stat = spi_eeprom_read_status(chipid);
+ if (stat < 0)
+ return stat;
+ if (!(stat & ATMEL_SR_WEN))
+ return -EPERM;
+
+ inbuf[0] = ATMEL_WRITE;
+ inbuf[1] = address;
+ inbufs[0] = inbuf;
+ inbufs[1] = buf;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = len;
+ incounts[2] = 0;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+ if (stat < 0)
+ goto unlock_return;
+
+ /* write start. max 10ms */
+ for (i = 10; i > 0; i--) {
+ int stat = spi_eeprom_read_status_nolock(chipid);
+ if (stat < 0)
+ goto unlock_return;
+ if (!(stat & ATMEL_SR_BSY))
+ break;
+ mdelay(1);
+ }
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ if (i == 0)
+ return -EIO;
+ return len;
+ unlock_return:
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+#ifdef CONFIG_PROC_FS
+#define MAX_SIZE 0x80 /* for ATMEL 25010 */
+static int spi_eeprom_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ unsigned int size = MAX_SIZE;
+ if (spi_eeprom_read((int)data, 0, (unsigned char *)page, size) < 0)
+ size = 0;
+ return size;
+}
+
+static int spi_eeprom_write_proc(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+{
+ unsigned int size = MAX_SIZE;
+ int i;
+ if (file->f_pos >= size)
+ return -EIO;
+ if (file->f_pos + count > size)
+ count = size - file->f_pos;
+ for (i = 0; i < count; i += 8) {
+ int len = count - i < 8 ? count - i : 8;
+ if (spi_eeprom_write((int)data, file->f_pos,
+ (unsigned char *)buffer, len) < 0) {
+ count = -EIO;
+ break;
+ }
+ buffer += len;
+ file->f_pos += len;
+ }
+ return count;
+}
+
+__init void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid)
+{
+ struct proc_dir_entry *entry;
+ char name[128];
+ sprintf(name, "seeprom-%d", chipid);
+ entry = create_proc_entry(name, 0600, dir);
+ if (entry) {
+ entry->read_proc = spi_eeprom_read_proc;
+ entry->write_proc = spi_eeprom_write_proc;
+ entry->data = (void *)chipid;
+ }
+}
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
new file mode 100644
index 0000000..fae3136
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
@@ -0,0 +1,159 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+static int (*txx9_spi_cs_func)(int chipid, int on);
+static DEFINE_SPINLOCK(txx9_spi_lock);
+
+extern unsigned int txx9_gbus_clock;
+
+#define SPI_FIFO_SIZE 4
+
+void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on))
+{
+ txx9_spi_cs_func = cs_func;
+ /* enter config mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(txx9_spi_wait);
+static void txx9_spi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* disable rx intr */
+ tx4938_spiptr->cr0 &= ~TXx9_SPCR0_RBSIE;
+ wake_up(&txx9_spi_wait);
+}
+static struct irqaction txx9_spi_action = {
+ txx9_spi_interrupt, 0, 0, "spi", NULL, NULL,
+};
+
+void __init txx9_spi_irqinit(int irc_irq)
+{
+ setup_irq(irc_irq, &txx9_spi_action);
+}
+
+int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
+ unsigned char **inbufs, unsigned int *incounts,
+ unsigned char **outbufs, unsigned int *outcounts,
+ int cansleep)
+{
+ unsigned int incount, outcount;
+ unsigned char *inp, *outp;
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&txx9_spi_lock, flags);
+ if ((tx4938_spiptr->mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE) {
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+ return -EBUSY;
+ }
+ /* enter config mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+ tx4938_spiptr->cr0 =
+ (desc->byteorder ? TXx9_SPCR0_SBOS : 0) |
+ (desc->polarity ? TXx9_SPCR0_SPOL : 0) |
+ (desc->phase ? TXx9_SPCR0_SPHA : 0) |
+ 0x08;
+ tx4938_spiptr->cr1 =
+ (((TXX9_IMCLK + desc->baud) / (2 * desc->baud) - 1) << 8) |
+ 0x08 /* 8 bit only */;
+ /* enter active mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_ACTIVE;
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+ /* CS ON */
+ if ((ret = txx9_spi_cs_func(chipid, 1)) < 0) {
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+ return ret;
+ }
+ udelay(desc->tcss);
+
+ /* do scatter IO */
+ inp = inbufs ? *inbufs : NULL;
+ outp = outbufs ? *outbufs : NULL;
+ incount = 0;
+ outcount = 0;
+ while (1) {
+ unsigned char data;
+ unsigned int count;
+ int i;
+ if (!incount) {
+ incount = incounts ? *incounts++ : 0;
+ inp = (incount && inbufs) ? *inbufs++ : NULL;
+ }
+ if (!outcount) {
+ outcount = outcounts ? *outcounts++ : 0;
+ outp = (outcount && outbufs) ? *outbufs++ : NULL;
+ }
+ if (!inp && !outp)
+ break;
+ count = SPI_FIFO_SIZE;
+ if (incount)
+ count = min(count, incount);
+ if (outcount)
+ count = min(count, outcount);
+
+ /* now tx must be idle... */
+ while (!(tx4938_spiptr->sr & TXx9_SPSR_SIDLE))
+ ;
+
+ tx4938_spiptr->cr0 =
+ (tx4938_spiptr->cr0 & ~TXx9_SPCR0_RXIFL_MASK) |
+ ((count - 1) << 12);
+ if (cansleep) {
+ /* enable rx intr */
+ tx4938_spiptr->cr0 |= TXx9_SPCR0_RBSIE;
+ }
+ /* send */
+ for (i = 0; i < count; i++)
+ tx4938_spiptr->dr = inp ? *inp++ : 0;
+ /* wait all rx data */
+ if (cansleep) {
+ wait_event(txx9_spi_wait,
+ tx4938_spiptr->sr & TXx9_SPSR_SRRDY);
+ } else {
+ while (!(tx4938_spiptr->sr & TXx9_SPSR_RBSI))
+ ;
+ }
+ /* receive */
+ for (i = 0; i < count; i++) {
+ data = tx4938_spiptr->dr;
+ if (outp)
+ *outp++ = data;
+ }
+ if (incount)
+ incount -= count;
+ if (outcount)
+ outcount -= count;
+ }
+
+ /* CS OFF */
+ udelay(desc->tcsh);
+ txx9_spi_cs_func(chipid, 0);
+ udelay(desc->tcsr);
+
+ spin_lock_irqsave(&txx9_spi_lock, flags);
+ /* enter config mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+ return 0;
+}
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
new file mode 100644
index 0000000..a7add16
--- /dev/null
+++ b/arch/mips/vr41xx/Kconfig
@@ -0,0 +1,88 @@
+config CASIO_E55
+ bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select ISA
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config IBM_WORKPAD
+ bool "Support for IBM WorkPad z50"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select ISA
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config NEC_CMBVR4133
+ bool "Support for NEC CMB-VR4133"
+ depends on MACH_VR41XX
+ select CPU_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+
+config ROCKHOPPER
+ bool "Support for Rockhopper baseboard"
+ depends on NEC_CMBVR4133
+ select I8259
+ select HAVE_STD_PC_SERIAL_PORT
+
+config TANBAC_TB022X
+ bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ The TANBAC VR4131 multichip module(TB0225) and
+ the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/>
+ about VR4131 multichip module and VR4131DIMM.
+
+config TANBAC_TB0226
+ bool "Support for TANBAC Mbase(TB0226)"
+ depends on TANBAC_TB022X
+ select GPIO_VR41XX
+ help
+ The TANBAC Mbase(TB0226) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mbase.
+
+config TANBAC_TB0287
+ bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
+ depends on TANBAC_TB022X
+ help
+ The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
+
+config VICTOR_MPC30X
+ bool "Support for Victor MP-C303/304"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config ZAO_CAPCELLA
+ bool "Support for ZAO Networks Capcella"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PCI_VR41XX
+ bool "Add PCI control unit support of NEC VR4100 series"
+ depends on MACH_VR41XX && HW_HAS_PCI
+ default y
+ select PCI
+
+config VRC4173
+ tristate "Add NEC VRC4173 companion chip support"
+ depends on MACH_VR41XX && PCI_VR41XX
+ help
+ The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index fcd3cb8..d758e43 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -69,7 +69,7 @@
static void __iomem *cmu_base;
static uint16_t cmuclkmsk, cmuclkmsk2;
-static spinlock_t cmu_lock;
+static DEFINE_SPINLOCK(cmu_lock);
#define cmu_read(offset) readw(cmu_base + (offset))
#define cmu_write(offset, value) writew((value), cmu_base + (offset))
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index e03be89..578f649 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -58,6 +58,14 @@
board_timer_setup = setup_timer_irq;
}
+void __init plat_setup(void)
+{
+ vr41xx_calculate_clock_frequency();
+
+ timer_init();
+ iomem_resource_init();
+}
+
void __init prom_init(void)
{
int argc, i;
@@ -71,12 +79,6 @@
if (i < (argc - 1))
strcat(arcs_cmdline, " ");
}
-
- vr41xx_calculate_clock_frequency();
-
- timer_init();
-
- iomem_resource_init();
}
unsigned long __init prom_free_prom_memory (void)
diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c
index ba58764..462a9af 100644
--- a/arch/mips/vr41xx/common/vrc4173.c
+++ b/arch/mips/vr41xx/common/vrc4173.c
@@ -81,8 +81,8 @@
static int vrc4173_initialized;
static uint16_t vrc4173_cmuclkmsk;
static uint16_t vrc4173_selectreg;
-static spinlock_t vrc4173_cmu_lock;
-static spinlock_t vrc4173_giu_lock;
+static DEFINE_SPINLOCK(vrc4173_cmu_lock);
+static DEFINE_SPINLOCK(vrc4173_giu_lock);
static inline void set_cmusrst(uint16_t val)
{
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
index db686ce..53272a5 100644
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
@@ -56,7 +56,7 @@
extern void i8259_init(void);
-static int __init nec_cmbvr4133_setup(void)
+static void __init nec_cmbvr4133_setup(void)
{
#ifdef CONFIG_ROCKHOPPER
extern void disable_pcnet(void);
@@ -90,7 +90,4 @@
#ifdef CONFIG_ROCKHOPPER
i8259_init();
#endif
- return 0;
}
-
-early_initcall(nec_cmbvr4133_setup);
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index f4a62a1..43e395a 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -253,6 +253,7 @@
return 0;
}
+EXPORT_SYMBOL(do_settimeofday);
static int set_rtc_time(unsigned long nowtime)
{
diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c
index 4081c36..5641722 100644
--- a/drivers/block/as-iosched.c
+++ b/drivers/block/as-iosched.c
@@ -1344,6 +1344,7 @@
* Don't want to have to handle merges.
*/
as_del_arq_hash(arq);
+ arq->request->flags |= REQ_NOMERGE;
}
/*
diff --git a/drivers/char/lcd.c b/drivers/char/lcd.c
index b771611..29963d8 100644
--- a/drivers/char/lcd.c
+++ b/drivers/char/lcd.c
@@ -575,8 +575,8 @@
static int lcd_waiters = 0;
-static long lcd_read(struct inode *inode, struct file *file, char *buf,
- unsigned long count)
+static ssize_t lcd_read(struct file *file, char *buf,
+ size_t count, loff_t *ofs)
{
long buttons_now;
diff --git a/drivers/char/lcd.h b/drivers/char/lcd.h
index 878a952..a8d4ae7 100644
--- a/drivers/char/lcd.h
+++ b/drivers/char/lcd.h
@@ -22,7 +22,7 @@
#define MAX_IDLE_TIME 120
struct lcd_display {
- unsigned long buttons;
+ unsigned buttons;
int size1;
int size2;
unsigned char line1[LCD_CHARS_PER_LINE];
diff --git a/drivers/char/qtronix.c b/drivers/char/qtronix.c
index 40a3cf6..601d09b 100644
--- a/drivers/char/qtronix.c
+++ b/drivers/char/qtronix.c
@@ -591,6 +591,11 @@
return retval;
queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
+ if (!queue) {
+ misc_deregister(&psaux_mouse);
+ return -ENOMEM;
+ }
+
memset(queue, 0, sizeof(*queue));
queue->head = queue->tail = 0;
init_waitqueue_head(&queue->proc_list);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1cadd2c..a737886 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -778,6 +778,35 @@
This option enables the use of the sleep LED as a hard drive
activity LED.
+config BLK_DEV_IDE_AU1XXX
+ bool "IDE for AMD Alchemy Au1200"
+ depends on SOC_AU1200
+choice
+ prompt "IDE Mode for AMD Alchemy Au1200"
+ default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+
+config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
+
+config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
+ depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+endchoice
+
+config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ bool "Enable burstable Mode on DbDMA"
+ default false
+ depends BLK_DEV_IDE_AU1XXX
+ help
+ This option enable the burstable Flag on DbDMA controller
+ (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY").
+
+config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
+ int "Maximum transfer size (KB) per request (up to 128)"
+ default "128"
+ depends BLK_DEV_IDE_AU1XXX
+
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
@@ -1013,7 +1042,7 @@
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
+ def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
config IDEDMA_IVB
bool "IGNORE word93 Validation BITS"
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 4063d2c..84665e2 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -64,6 +64,7 @@
case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
+ case ide_au1xxx: name = "au1xxx"; break;
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
new file mode 100644
index 0000000..2b6327c
--- /dev/null
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -0,0 +1,1250 @@
+/*
+ * linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+
+#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/sysdev.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#if CONFIG_PM
+#include <asm/mach-au1x00/au1xxx_pm.h>
+#endif
+
+#include <asm/mach-au1x00/au1xxx_ide.h>
+
+#define DRV_NAME "au1200-ide"
+#define DRV_VERSION "1.0"
+#define DRV_AUTHOR "AMD PCS / Pete Popov <ppopov@embeddedalley.com>"
+#define DRV_DESC "Au1200 IDE"
+
+static _auide_hwif auide_hwif;
+static spinlock_t ide_tune_drive_spin_lock = SPIN_LOCK_UNLOCKED;
+static spinlock_t ide_tune_chipset_spin_lock = SPIN_LOCK_UNLOCKED;
+static int dbdma_init_done = 0;
+
+/*
+ * local I/O functions
+ */
+u8 auide_inb(unsigned long port)
+{
+ return (au_readb(port));
+}
+
+u16 auide_inw(unsigned long port)
+{
+ return (au_readw(port));
+}
+
+u32 auide_inl(unsigned long port)
+{
+ return (au_readl(port));
+}
+
+void auide_insw(unsigned long port, void *addr, u32 count)
+{
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+
+ _auide_hwif *ahwif = &auide_hwif;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+
+ if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1,
+ DDMA_FLAGS_NOIE)) {
+ printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
+ return;
+ }
+ ctp = *((chan_tab_t **)ahwif->rx_chan);
+ dp = ctp->cur_ptr;
+ while (dp->dscr_cmd0 & DSCR_CMD0_V)
+ ;
+ ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+#else
+ while (count--)
+ {
+ *(u16 *)addr = au_readw(port);
+ addr +=2 ;
+ }
+#endif
+}
+
+void auide_insl(unsigned long port, void *addr, u32 count)
+{
+ while (count--)
+ {
+ *(u32 *)addr = au_readl(port);
+ /* NOTE: For IDE interfaces over PCMCIA,
+ * 32-bit access does not work
+ */
+ addr += 4;
+ }
+}
+
+void auide_outb(u8 addr, unsigned long port)
+{
+ return (au_writeb(addr, port));
+}
+
+void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port)
+{
+ return (au_writeb(addr, port));
+}
+
+void auide_outw(u16 addr, unsigned long port)
+{
+ return (au_writew(addr, port));
+}
+
+void auide_outl(u32 addr, unsigned long port)
+{
+ return (au_writel(addr, port));
+}
+
+void auide_outsw(unsigned long port, void *addr, u32 count)
+{
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+ _auide_hwif *ahwif = &auide_hwif;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+
+ if(!put_source_flags(ahwif->tx_chan, (void*)addr,
+ count << 1, DDMA_FLAGS_NOIE)) {
+ printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
+ return;
+ }
+ ctp = *((chan_tab_t **)ahwif->tx_chan);
+ dp = ctp->cur_ptr;
+ while (dp->dscr_cmd0 & DSCR_CMD0_V)
+ ;
+ ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+#else
+ while (count--)
+ {
+ au_writew(*(u16 *)addr, port);
+ addr += 2;
+ }
+#endif
+}
+
+void auide_outsl(unsigned long port, void *addr, u32 count)
+{
+ while (count--)
+ {
+ au_writel(*(u32 *)addr, port);
+ /* NOTE: For IDE interfaces over PCMCIA,
+ * 32-bit access does not work
+ */
+ addr += 4;
+ }
+}
+
+static void auide_tune_drive(ide_drive_t *drive, byte pio)
+{
+ int mem_sttime;
+ int mem_stcfg;
+ unsigned long flags;
+ u8 speed;
+
+ /* get the best pio mode for the drive */
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+
+ printk("%s: setting Au1XXX IDE to PIO mode%d\n",
+ drive->name, pio);
+
+ spin_lock_irqsave(&ide_tune_drive_spin_lock, flags);
+
+ mem_sttime = 0;
+ mem_stcfg = au_readl(MEM_STCFG2);
+
+ /* set pio mode! */
+ switch(pio) {
+ case 0:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO0_TWCS
+ | SBC_IDE_PIO0_TCSH
+ | SBC_IDE_PIO0_TCSOFF
+ | SBC_IDE_PIO0_TWP
+ | SBC_IDE_PIO0_TCSW
+ | SBC_IDE_PIO0_TPM
+ | SBC_IDE_PIO0_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+ break;
+
+ case 1:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO1_TWCS
+ | SBC_IDE_PIO1_TCSH
+ | SBC_IDE_PIO1_TCSOFF
+ | SBC_IDE_PIO1_TWP
+ | SBC_IDE_PIO1_TCSW
+ | SBC_IDE_PIO1_TPM
+ | SBC_IDE_PIO1_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
+ break;
+
+ case 2:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO2_TWCS
+ | SBC_IDE_PIO2_TCSH
+ | SBC_IDE_PIO2_TCSOFF
+ | SBC_IDE_PIO2_TWP
+ | SBC_IDE_PIO2_TCSW
+ | SBC_IDE_PIO2_TPM
+ | SBC_IDE_PIO2_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
+ break;
+
+ case 3:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO3_TWCS
+ | SBC_IDE_PIO3_TCSH
+ | SBC_IDE_PIO3_TCSOFF
+ | SBC_IDE_PIO3_TWP
+ | SBC_IDE_PIO3_TCSW
+ | SBC_IDE_PIO3_TPM
+ | SBC_IDE_PIO3_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;
+
+ break;
+
+ case 4:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO4_TWCS
+ | SBC_IDE_PIO4_TCSH
+ | SBC_IDE_PIO4_TCSOFF
+ | SBC_IDE_PIO4_TWP
+ | SBC_IDE_PIO4_TCSW
+ | SBC_IDE_PIO4_TPM
+ | SBC_IDE_PIO4_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
+ break;
+ }
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+
+ spin_unlock_irqrestore(&ide_tune_drive_spin_lock, flags);
+
+ speed = pio + XFER_PIO_0;
+ ide_config_drive_speed(drive, speed);
+}
+
+static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
+{
+ u8 mode = 0;
+ int mem_sttime;
+ int mem_stcfg;
+ unsigned long flags;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ struct hd_driveid *id = drive->id;
+
+ /*
+ * Now see what the current drive is capable of,
+ * selecting UDMA only if the mate said it was ok.
+ */
+ if (id && (id->capability & 1) && drive->autodma &&
+ !__ide_dma_bad_drive(drive)) {
+ if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
+ if (id->dma_mword & 4)
+ mode = XFER_MW_DMA_2;
+ else if (id->dma_mword & 2)
+ mode = XFER_MW_DMA_1;
+ else if (id->dma_mword & 1)
+ mode = XFER_MW_DMA_0;
+ }
+ }
+#endif
+
+ spin_lock_irqsave(&ide_tune_chipset_spin_lock, flags);
+
+ mem_sttime = 0;
+ mem_stcfg = au_readl(MEM_STCFG2);
+
+ switch(speed) {
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ auide_tune_drive(drive, (speed - XFER_PIO_0));
+ break;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ case XFER_MW_DMA_2:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA2_TWCS
+ | SBC_IDE_MDMA2_TCSH
+ | SBC_IDE_MDMA2_TCSOFF
+ | SBC_IDE_MDMA2_TWP
+ | SBC_IDE_MDMA2_TCSW
+ | SBC_IDE_MDMA2_TPM
+ | SBC_IDE_MDMA2_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
+
+ mode = XFER_MW_DMA_2;
+ break;
+ case XFER_MW_DMA_1:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA1_TWCS
+ | SBC_IDE_MDMA1_TCSH
+ | SBC_IDE_MDMA1_TCSOFF
+ | SBC_IDE_MDMA1_TWP
+ | SBC_IDE_MDMA1_TCSW
+ | SBC_IDE_MDMA1_TPM
+ | SBC_IDE_MDMA1_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
+
+ mode = XFER_MW_DMA_1;
+ break;
+ case XFER_MW_DMA_0:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA0_TWCS
+ | SBC_IDE_MDMA0_TCSH
+ | SBC_IDE_MDMA0_TCSOFF
+ | SBC_IDE_MDMA0_TWP
+ | SBC_IDE_MDMA0_TCSW
+ | SBC_IDE_MDMA0_TPM
+ | SBC_IDE_MDMA0_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
+
+ mode = XFER_MW_DMA_0;
+ break;
+#endif
+ default:
+ return 1;
+ }
+
+ /*
+ * Tell the drive to switch to the new mode; abort on failure.
+ */
+ if (!mode || ide_config_drive_speed(drive, mode))
+ {
+ return 1; /* failure */
+ }
+
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+
+ spin_unlock_irqrestore(&ide_tune_chipset_spin_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+
+static int in_drive_list(struct hd_driveid *id,
+ const struct drive_list_entry *drive_table)
+{
+ for ( ; drive_table->id_model ; drive_table++){
+ if ((!strcmp(drive_table->id_model, id->model)) &&
+ ((strstr(drive_table->id_firmware, id->fw_rev)) ||
+ (!strcmp(drive_table->id_firmware, "ALL")))
+ )
+ return 1;
+ }
+ return 0;
+}
+
+static int auide_build_sglist(ide_drive_t *drive, struct request *rq)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+ struct scatterlist *sg = hwif->sg_table;
+
+ ide_map_sg(drive, rq);
+
+ if (rq_data_dir(rq) == READ)
+ hwif->sg_dma_direction = DMA_FROM_DEVICE;
+ else
+ hwif->sg_dma_direction = DMA_TO_DEVICE;
+
+ return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
+ hwif->sg_dma_direction);
+}
+
+static int auide_build_dmatable(ide_drive_t *drive)
+{
+ int i, iswrite, count = 0;
+ ide_hwif_t *hwif = HWIF(drive);
+
+ struct request *rq = HWGROUP(drive)->rq;
+
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+ struct scatterlist *sg;
+
+ iswrite = (rq_data_dir(rq) == WRITE);
+ /* Save for interrupt context */
+ ahwif->drive = drive;
+
+ /* Build sglist */
+ hwif->sg_nents = i = auide_build_sglist(drive, rq);
+
+ if (!i)
+ return 0;
+
+ /* fill the descriptors */
+ sg = hwif->sg_table;
+ while (i && sg_dma_len(sg)) {
+ u32 cur_addr;
+ u32 cur_len;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ while (cur_len) {
+ u32 flags = DDMA_FLAGS_NOIE;
+ unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
+
+ if (++count >= PRD_ENTRIES) {
+ printk(KERN_WARNING "%s: DMA table too small\n",
+ drive->name);
+ goto use_pio_instead;
+ }
+
+ /* Lets enable intr for the last descriptor only */
+ if (1==i)
+ flags = DDMA_FLAGS_IE;
+ else
+ flags = DDMA_FLAGS_NOIE;
+
+ if (iswrite) {
+ if(!put_source_flags(ahwif->tx_chan,
+ (void*)(page_address(sg->page)
+ + sg->offset),
+ tc, flags)) {
+ printk(KERN_ERR "%s failed %d\n",
+ __FUNCTION__, __LINE__);
+ }
+ } else
+ {
+ if(!put_dest_flags(ahwif->rx_chan,
+ (void*)(page_address(sg->page)
+ + sg->offset),
+ tc, flags)) {
+ printk(KERN_ERR "%s failed %d\n",
+ __FUNCTION__, __LINE__);
+ }
+ }
+
+ cur_addr += tc;
+ cur_len -= tc;
+ }
+ sg++;
+ i--;
+ }
+
+ if (count)
+ return 1;
+
+use_pio_instead:
+ dma_unmap_sg(ahwif->dev,
+ hwif->sg_table,
+ hwif->sg_nents,
+ hwif->sg_dma_direction);
+
+ return 0; /* revert to PIO for this request */
+}
+
+static int auide_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+
+ if (hwif->sg_nents) {
+ dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
+ hwif->sg_dma_direction);
+ hwif->sg_nents = 0;
+ }
+
+ return 0;
+}
+
+static void auide_dma_start(ide_drive_t *drive )
+{
+// printk("%s\n", __FUNCTION__);
+}
+
+ide_startstop_t auide_dma_intr(ide_drive_t *drive)
+{
+ //printk("%s\n", __FUNCTION__);
+
+ u8 stat = 0, dma_stat = 0;
+
+ dma_stat = HWIF(drive)->ide_dma_end(drive);
+ stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */
+ if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
+ if (!dma_stat) {
+ struct request *rq = HWGROUP(drive)->rq;
+
+ ide_end_request(drive, 1, rq->nr_sectors);
+ return ide_stopped;
+ }
+ printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
+ drive->name, dma_stat);
+ }
+ return ide_error(drive, "dma_intr", stat);
+}
+
+static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ //printk("%s\n", __FUNCTION__);
+
+ /* issue cmd to drive */
+ ide_execute_command(drive, command, &auide_dma_intr,
+ (2*WAIT_CMD), NULL);
+}
+
+static int auide_dma_setup(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ if (drive->media != ide_disk)
+ return 1;
+
+ if (!auide_build_dmatable(drive))
+ /* try PIO instead of DMA */
+ return 1;
+
+ drive->waiting_for_dma = 1;
+
+ return 0;
+}
+
+static int auide_dma_check(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ if( !dbdma_init_done ){
+ auide_hwif.white_list = in_drive_list(drive->id,
+ dma_white_list);
+ auide_hwif.black_list = in_drive_list(drive->id,
+ dma_black_list);
+ auide_hwif.drive = drive;
+ auide_ddma_init(&auide_hwif);
+ dbdma_init_done = 1;
+ }
+#endif
+
+ /* Is the drive in our DMA black list? */
+ if ( auide_hwif.black_list ) {
+ drive->using_dma = 0;
+ printk("%s found in dma_blacklist[]! Disabling DMA.\n",
+ drive->id->model);
+ }
+ else
+ drive->using_dma = 1;
+
+ return HWIF(drive)->ide_dma_host_on(drive);
+}
+
+static int auide_dma_test_irq(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ if (!drive->waiting_for_dma)
+ printk(KERN_WARNING "%s: ide_dma_test_irq \
+ called while not waiting\n", drive->name);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set
+ */
+ drive->waiting_for_dma++;
+ if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
+ printk(KERN_WARNING "%s: timeout waiting for ddma to \
+ complete\n", drive->name);
+ return 1;
+ }
+ udelay(10);
+ return 0;
+}
+
+static int auide_dma_host_on(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ return 0;
+}
+
+static int auide_dma_on(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ drive->using_dma = 1;
+ return auide_dma_host_on(drive);
+}
+
+
+static int auide_dma_host_off(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ return 0;
+}
+
+static int auide_dma_off_quietly(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ drive->using_dma = 0;
+ return auide_dma_host_off(drive);
+}
+
+static int auide_dma_lostirq(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ printk(KERN_ERR "%s: IRQ lost\n", drive->name);
+ return 0;
+}
+
+static void auide_ddma_tx_callback(int irq, void *param, struct pt_regs *regs)
+{
+// printk("%s\n", __FUNCTION__);
+
+ _auide_hwif *ahwif = (_auide_hwif*)param;
+ ahwif->drive->waiting_for_dma = 0;
+ return;
+}
+
+static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs)
+{
+// printk("%s\n", __FUNCTION__);
+
+ _auide_hwif *ahwif = (_auide_hwif*)param;
+ ahwif->drive->waiting_for_dma = 0;
+ return;
+}
+
+static int auide_dma_timeout(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
+
+ if (HWIF(drive)->ide_dma_test_irq(drive))
+ return 0;
+
+ return HWIF(drive)->ide_dma_end(drive);
+}
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+
+static int auide_ddma_init( _auide_hwif *auide )
+{
+// printk("%s\n", __FUNCTION__);
+
+ dbdev_tab_t source_dev_tab;
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ dbdev_tab_t target_dev_tab;
+ ide_hwif_t *hwif = auide->hwif;
+ char warning_output [2][80];
+ int i;
+#endif
+
+ /* Add our custom device to DDMA device table */
+ /* Create our new device entries in the table */
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ source_dev_tab.dev_id = AU1XXX_ATA_DDMA_REQ;
+
+ if( auide->white_list || auide->black_list ){
+ source_dev_tab.dev_tsize = 8;
+ source_dev_tab.dev_devwidth = 32;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+
+ /* init device table for target - static bus controller - */
+ target_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ target_dev_tab.dev_tsize = 8;
+ target_dev_tab.dev_devwidth = 32;
+ target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ target_dev_tab.dev_intlevel = 0;
+ target_dev_tab.dev_intpolarity = 0;
+ target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE;
+ }
+ else{
+ source_dev_tab.dev_tsize = 1;
+ source_dev_tab.dev_devwidth = 16;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+
+ /* init device table for target - static bus controller - */
+ target_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ target_dev_tab.dev_tsize = 1;
+ target_dev_tab.dev_devwidth = 16;
+ target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ target_dev_tab.dev_intlevel = 0;
+ target_dev_tab.dev_intpolarity = 0;
+ target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE;
+
+ sprintf(&warning_output[0][0],
+ "%s is not on ide driver white list.",
+ auide_hwif.drive->id->model);
+ for ( i=strlen(&warning_output[0][0]) ; i<76; i++ ){
+ sprintf(&warning_output[0][i]," ");
+ }
+
+ sprintf(&warning_output[1][0],
+ "To add %s please read 'Documentation/mips/AU1xxx_IDE.README'.",
+ auide_hwif.drive->id->model);
+ for ( i=strlen(&warning_output[1][0]) ; i<76; i++ ){
+ sprintf(&warning_output[1][i]," ");
+ }
+
+ printk("\n****************************************");
+ printk("****************************************\n");
+ printk("* %s *\n",&warning_output[0][0]);
+ printk("* Switch to safe MWDMA Mode! ");
+ printk(" *\n");
+ printk("* %s *\n",&warning_output[1][0]);
+ printk("****************************************");
+ printk("****************************************\n\n");
+ }
+#else
+ source_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ source_dev_tab.dev_tsize = 8;
+ source_dev_tab.dev_devwidth = 32;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+#endif
+
+#if CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ /* set flags for tx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_OUT
+ | DEV_FLAGS_SYNC
+ | DEV_FLAGS_BURSTABLE;
+ auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+ /* set flags for rx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_IN
+ | DEV_FLAGS_SYNC
+ | DEV_FLAGS_BURSTABLE;
+ auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+#else
+ /* set flags for tx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_OUT | DEV_FLAGS_SYNC;
+ auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+ /* set flags for rx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_IN | DEV_FLAGS_SYNC;
+ auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+
+ auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
+
+ /* Get a channel for TX */
+ auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
+ auide->tx_dev_id,
+ auide_ddma_tx_callback,
+ (void*)auide);
+ /* Get a channel for RX */
+ auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+ auide->target_dev_id,
+ auide_ddma_rx_callback,
+ (void*)auide);
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+ /*
+ * Note: if call back is not enabled, update ctp->cur_ptr manually
+ */
+ auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
+ auide->tx_dev_id,
+ NULL,
+ (void*)auide);
+ auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+ DSCR_CMD0_ALWAYS,
+ NULL,
+ (void*)auide);
+#endif
+ auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
+ NUM_DESCRIPTORS);
+ auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
+ NUM_DESCRIPTORS);
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
+ PRD_ENTRIES * PRD_BYTES, /* 1 Page */
+ &hwif->dmatable_dma, GFP_KERNEL);
+
+ auide->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES,
+ GFP_KERNEL|GFP_DMA);
+ if (auide->sg_table == NULL) {
+ return -ENOMEM;
+ }
+#endif
+ au1xxx_dbdma_start( auide->tx_chan );
+ au1xxx_dbdma_start( auide->rx_chan );
+ return 0;
+}
+
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+{
+ int i;
+#define ide_ioreg_t unsigned long
+ ide_ioreg_t *ata_regs = hw->io_ports;
+
+ /* fixme */
+ for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
+ *ata_regs++ = (ide_ioreg_t) ahwif->regbase
+ + (ide_ioreg_t)(i << AU1XXX_ATA_REG_OFFSET);
+ }
+
+ /* set the Alternative Status register */
+ *ata_regs = (ide_ioreg_t) ahwif->regbase
+ + (ide_ioreg_t)(14 << AU1XXX_ATA_REG_OFFSET);
+}
+
+static int au_ide_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ _auide_hwif *ahwif = &auide_hwif;
+ ide_hwif_t *hwif;
+ struct resource *res;
+ int ret = 0;
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ char *mode = "MWDMA2";
+#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+ char *mode = "PIO+DDMA(offload)";
+#endif
+
+ memset(&auide_hwif, 0, sizeof(_auide_hwif));
+ auide_hwif.dev = 0;
+
+ ahwif->dev = dev;
+ ahwif->irq = platform_get_irq(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res == NULL) {
+ pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
+ pr_debug("%s: request_mem_region failed\n", DRV_NAME);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
+ if (ahwif->regbase == 0) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ hwif = &ide_hwifs[pdev->id];
+ hw_regs_t *hw = &hwif->hw;
+ hwif->irq = hw->irq = ahwif->irq;
+ hwif->chipset = ide_au1xxx;
+
+ auide_setup_ports(hw, ahwif);
+ memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
+ hwif->rqsize = CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ;
+ hwif->rqsize = ((hwif->rqsize > AU1XXX_ATA_RQSIZE)
+ || (hwif->rqsize < 32)) ? AU1XXX_ATA_RQSIZE : hwif->rqsize;
+#else /* if kernel config is not set */
+ hwif->rqsize = AU1XXX_ATA_RQSIZE;
+#endif
+
+ hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */
+ hwif->swdma_mask = 0x07;
+#else
+ hwif->mwdma_mask = 0x0;
+ hwif->swdma_mask = 0x0;
+#endif
+ //hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
+ hwif->noprobe = 0;
+ hwif->drives[0].unmask = 1;
+ hwif->drives[1].unmask = 1;
+
+ /* hold should be on in all cases */
+ hwif->hold = 1;
+ hwif->mmio = 2;
+
+ /* set up local I/O function entry points */
+ hwif->INB = auide_inb;
+ hwif->INW = auide_inw;
+ hwif->INL = auide_inl;
+ hwif->INSW = auide_insw;
+ hwif->INSL = auide_insl;
+ hwif->OUTB = auide_outb;
+ hwif->OUTBSYNC = auide_outbsync;
+ hwif->OUTW = auide_outw;
+ hwif->OUTL = auide_outl;
+ hwif->OUTSW = auide_outsw;
+ hwif->OUTSL = auide_outsl;
+
+ hwif->tuneproc = &auide_tune_drive;
+ hwif->speedproc = &auide_tune_chipset;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ hwif->ide_dma_off_quietly = &auide_dma_off_quietly;
+ hwif->ide_dma_timeout = &auide_dma_timeout;
+
+ hwif->ide_dma_check = &auide_dma_check;
+ hwif->dma_exec_cmd = &auide_dma_exec_cmd;
+ hwif->dma_start = &auide_dma_start;
+ hwif->ide_dma_end = &auide_dma_end;
+ hwif->dma_setup = &auide_dma_setup;
+ hwif->ide_dma_test_irq = &auide_dma_test_irq;
+ hwif->ide_dma_host_off = &auide_dma_host_off;
+ hwif->ide_dma_host_on = &auide_dma_host_on;
+ hwif->ide_dma_lostirq = &auide_dma_lostirq;
+ hwif->ide_dma_on = &auide_dma_on;
+
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+ hwif->atapi_dma = 1;
+ hwif->drives[0].using_dma = 1;
+ hwif->drives[1].using_dma = 1;
+#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+ hwif->autodma = 0;
+ hwif->channel = 0;
+ hwif->hold = 1;
+ hwif->select_data = 0; /* no chipset-specific code */
+ hwif->config_data = 0; /* no chipset-specific code */
+
+ hwif->drives[0].autodma = 0;
+ hwif->drives[0].drive_data = 0; /* no drive data */
+ hwif->drives[0].using_dma = 0;
+ hwif->drives[0].waiting_for_dma = 0;
+ hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */
+ /* secondary hdd not supported */
+ hwif->drives[1].autodma = 0;
+
+ hwif->drives[1].drive_data = 0;
+ hwif->drives[1].using_dma = 0;
+ hwif->drives[1].waiting_for_dma = 0;
+ hwif->drives[1].autotune = 2; /* 1=autotune, 2=noautotune, 0=default */
+#endif
+ hwif->drives[0].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+ hwif->drives[1].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+
+ /*Register Driver with PM Framework*/
+#ifdef CONFIG_PM
+ auide_hwif.pm.lock = SPIN_LOCK_UNLOCKED;
+ auide_hwif.pm.stopped = 0;
+
+ auide_hwif.pm.dev = new_au1xxx_power_device( "ide",
+ &au1200ide_pm_callback,
+ NULL);
+ if ( auide_hwif.pm.dev == NULL )
+ printk(KERN_INFO "Unable to create a power management \
+ device entry for the au1200-IDE.\n");
+ else
+ printk(KERN_INFO "Power management device entry for the \
+ au1200-IDE loaded.\n");
+#endif
+
+ auide_hwif.hwif = hwif;
+ hwif->hwif_data = &auide_hwif;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ auide_ddma_init(&auide_hwif);
+ dbdma_init_done = 1;
+#endif
+
+ probe_hwif_init(hwif);
+ dev_set_drvdata(dev, hwif);
+
+ printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
+
+out:
+ return ret;
+}
+
+static int au_ide_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ ide_hwif_t *hwif = dev_get_drvdata(dev);
+ _auide_hwif *ahwif = &auide_hwif;
+
+ ide_unregister(hwif - ide_hwifs);
+
+ iounmap((void *)ahwif->regbase);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start);
+
+ return 0;
+}
+
+static struct device_driver au1200_ide_driver = {
+ .name = "au1200-ide",
+ .bus = &platform_bus_type,
+ .probe = au_ide_probe,
+ .remove = au_ide_remove,
+};
+
+static int __init au_ide_init(void)
+{
+ return driver_register(&au1200_ide_driver);
+}
+
+static void __init au_ide_exit(void)
+{
+ driver_unregister(&au1200_ide_driver);
+}
+
+#ifdef CONFIG_PM
+int au1200ide_pm_callback( au1xxx_power_dev_t *dev,\
+ au1xxx_request_t request, void *data) {
+
+ unsigned int d, err = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(auide_hwif.pm.lock, flags);
+
+ switch (request){
+ case AU1XXX_PM_SLEEP:
+ err = au1xxxide_pm_sleep(dev);
+ break;
+ case AU1XXX_PM_WAKEUP:
+ d = *((unsigned int*)data);
+ if ( d > 0 && d <= 99) {
+ err = au1xxxide_pm_standby(dev);
+ }
+ else {
+ err = au1xxxide_pm_resume(dev);
+ }
+ break;
+ case AU1XXX_PM_GETSTATUS:
+ err = au1xxxide_pm_getstatus(dev);
+ break;
+ case AU1XXX_PM_ACCESS:
+ err = au1xxxide_pm_access(dev);
+ break;
+ case AU1XXX_PM_IDLE:
+ err = au1xxxide_pm_idle(dev);
+ break;
+ case AU1XXX_PM_CLEANUP:
+ err = au1xxxide_pm_cleanup(dev);
+ break;
+ default:
+ err = -1;
+ break;
+ }
+
+ spin_unlock_irqrestore(auide_hwif.pm.lock, flags);
+
+ return err;
+}
+
+static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+
+static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ) {
+
+ int retval;
+ ide_hwif_t *hwif = auide_hwif.hwif;
+ struct request rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+
+ if(auide_hwif.pm.stopped)
+ return -1;
+
+ /*
+ * wait until hard disc is ready
+ */
+ if ( wait_for_ready(&hwif->drives[0], 35000) ) {
+ printk("Wait for drive sleep timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * sequenz to tell the high level ide driver that pm is resuming
+ */
+ memset(&rq, 0, sizeof(rq));
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq.flags = REQ_PM_SUSPEND;
+ rq.special = &args;
+ rq.pm = &rqpm;
+ rqpm.pm_step = ide_pm_state_start_suspend;
+ rqpm.pm_state = PMSG_SUSPEND;
+
+ retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_wait);
+
+ if (wait_for_ready (&hwif->drives[0], 35000)) {
+ printk("Wait for drive sleep timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * stop dbdma channels
+ */
+ au1xxx_dbdma_reset(auide_hwif.tx_chan);
+ au1xxx_dbdma_reset(auide_hwif.rx_chan);
+
+ auide_hwif.pm.stopped = 1;
+
+ return retval;
+}
+
+static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ) {
+
+ int retval;
+ ide_hwif_t *hwif = auide_hwif.hwif;
+ struct request rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+
+ if(!auide_hwif.pm.stopped)
+ return -1;
+
+ /*
+ * start dbdma channels
+ */
+ au1xxx_dbdma_start(auide_hwif.tx_chan);
+ au1xxx_dbdma_start(auide_hwif.rx_chan);
+
+ /*
+ * wait until hard disc is ready
+ */
+ if (wait_for_ready ( &hwif->drives[0], 35000)) {
+ printk("Wait for drive wake up timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * sequenz to tell the high level ide driver that pm is resuming
+ */
+ memset(&rq, 0, sizeof(rq));
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq.flags = REQ_PM_RESUME;
+ rq.special = &args;
+ rq.pm = &rqpm;
+ rqpm.pm_step = ide_pm_state_start_resume;
+ rqpm.pm_state = PMSG_ON;
+
+ retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_head_wait);
+
+ /*
+ * wait for hard disc
+ */
+ if ( wait_for_ready(&hwif->drives[0], 35000) ) {
+ printk("Wait for drive wake up timeout!\n");
+ retval = -1;
+ }
+
+ auide_hwif.pm.stopped = 0;
+
+ return retval;
+}
+
+static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ) {
+ return dev->cur_state;
+}
+
+static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ) {
+ if (dev->cur_state != AWAKE_STATE)
+ return 0;
+ else
+ return -1;
+}
+
+static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+
+static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AU1200 IDE driver");
+
+module_init(au_ide_init);
+module_exit(au_ide_exit);
diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h
index c5f3cfe..86d72fa 100644
--- a/drivers/infiniband/core/agent.h
+++ b/drivers/infiniband/core/agent.h
@@ -39,6 +39,7 @@
#ifndef __AGENT_H_
#define __AGENT_H_
+#include <linux/err.h>
#include <rdma/ib_mad.h>
extern int ib_agent_port_open(struct ib_device *device, int port_num);
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 3d63bc1..4c8fb1f 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -199,7 +199,7 @@
if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
return -EBUSY;
- amikbd_dev = input_dev_allocate();
+ amikbd_dev = input_allocate_device();
if (!amikbd_dev) {
printk(KERN_ERR "amikbd: not enough memory for input device\n");
release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index 5778220..29d97b1 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -143,7 +143,7 @@
sparcspkr_dev->name = "Sparc ISA Speaker";
sparcspkr_dev->event = isa_spkr_event;
- input_register_device(&sparcspkr_dev);
+ input_register_device(sparcspkr_dev);
return 0;
}
diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c
index b2b0384..26dd06e 100644
--- a/drivers/media/video/indycam.c
+++ b/drivers/media/video/indycam.c
@@ -9,16 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/major.h>
-#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/videodev.h>
/* IndyCam decodes stream of photons into digital image representation ;-) */
@@ -44,8 +44,6 @@
#define indycam_regdump(client)
#endif
-#define VINO_ADAPTER (I2C_ALGO_SGI | I2C_HW_SGI_VINO)
-
struct indycam {
struct i2c_client *client;
int version;
@@ -300,7 +298,7 @@
static int indycam_probe(struct i2c_adapter *adap)
{
/* Indy specific crap */
- if (adap->id == VINO_ADAPTER)
+ if (adap->id == I2C_HW_SGI_VINO)
return indycam_attach(adap, INDYCAM_ADDR, 0);
/* Feel free to add probe here :-) */
return -ENODEV;
diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c
index 454f5c1..3ddbb62 100644
--- a/drivers/media/video/saa7191.c
+++ b/drivers/media/video/saa7191.c
@@ -9,16 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/major.h>
-#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/videodev.h>
#include <linux/video_decoder.h>
@@ -33,8 +33,6 @@
MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>");
MODULE_LICENSE("GPL");
-#define VINO_ADAPTER (I2C_ALGO_SGI | I2C_HW_SGI_VINO)
-
struct saa7191 {
struct i2c_client *client;
@@ -337,7 +335,7 @@
static int saa7191_probe(struct i2c_adapter *adap)
{
/* Always connected to VINO */
- if (adap->id == VINO_ADAPTER)
+ if (adap->id == I2C_HW_SGI_VINO)
return saa7191_attach(adap, SAA7191_ADDR, 0);
/* Feel free to add probe here :-) */
return -ENODEV;
@@ -364,7 +362,7 @@
cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC |
VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO;
- cap->inputs = (client->adapter->id == VINO_ADAPTER) ? 2 : 1;
+ cap->inputs = (client->adapter->id == I2C_HW_SGI_VINO) ? 2 : 1;
cap->outputs = 1;
break;
}
@@ -422,7 +420,7 @@
int *iarg = arg;
switch (client->adapter->id) {
- case VINO_ADAPTER:
+ case I2C_HW_SGI_VINO:
return saa7191_set_input(client, *iarg);
default:
if (*iarg != 0)
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index d8a0f76..ed4394e 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -26,14 +26,15 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/time.h>
#include <linux/moduleparam.h>
+#include <linux/time.h>
+#include <linux/version.h>
#ifdef CONFIG_KMOD
#include <linux/kmod.h>
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 4991bbd..c483a86 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -60,4 +60,13 @@
If unsure, say N.
+config MMC_AU1X
+ tristate "Alchemy AU1XX0 MMC Card Interface support"
+ depends on SOC_AU1X00 && MMC
+ help
+ This selects the AMD Alchemy(R) Multimedia card interface.
+ iIf you have a Alchemy platform with a MMC slot, say Y or M here.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 89510c2..e351e71 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -18,5 +18,6 @@
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
+obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
new file mode 100644
index 0000000..aaf0463
--- /dev/null
+++ b/drivers/mmc/au1xmmc.c
@@ -0,0 +1,1026 @@
+/*
+ * linux/drivers/mmc/au1xmmc.c - AU1XX0 MMC driver
+ *
+ * Copyright (c) 2005, Advanced Micro Devices, Inc.
+ *
+ * Developed with help from the 2.4.30 MMC AU1XXX controller including
+ * the following copyright notices:
+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
+ * Portions Copyright (C) 2002 Embedix, Inc
+ * Copyright 2002 Hewlett-Packard Company
+
+ * 2.6 version of this driver inspired by:
+ * (drivers/mmc/wbsd.c) Copyright (C) 2004-2005 Pierre Ossman,
+ * All Rights Reserved.
+ * (drivers/mmc/pxa.c) Copyright (C) 2003 Russell King,
+ * All Rights Reserved.
+ *
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Why is a timer used to detect insert events?
+ *
+ * From the AU1100 MMC application guide:
+ * If the Au1100-based design is intended to support both MultiMediaCards
+ * and 1- or 4-data bit SecureDigital cards, then the solution is to
+ * connect a weak (560KOhm) pull-up resistor to connector pin 1.
+ * In doing so, a MMC card never enters SPI-mode communications,
+ * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
+ * (the low to high transition will not occur).
+ *
+ * So we use the timer to check the status manually.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/protocol.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/scatterlist.h>
+
+#include <au1xxx.h>
+#include "au1xmmc.h"
+
+#define DRIVER_NAME "au1xxx-mmc"
+
+/* Set this to enable special debugging macros */
+/* #define MMC_DEBUG */
+
+#ifdef MMC_DEBUG
+#define DEBUG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
+#else
+#define DEBUG(fmt, idx, args...)
+#endif
+
+const struct {
+ u32 iobase;
+ u32 tx_devid, rx_devid;
+ u16 bcsrpwr;
+ u16 bcsrstatus;
+ u16 wpstatus;
+} au1xmmc_card_table[] = {
+ { SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0,
+ BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP },
+#ifndef CONFIG_MIPS_DB1200
+ { SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1,
+ BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP }
+#endif
+};
+
+#define AU1XMMC_CONTROLLER_COUNT \
+ (sizeof(au1xmmc_card_table) / sizeof(au1xmmc_card_table[0]))
+
+/* This array stores pointers for the hosts (used by the IRQ handler) */
+struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];
+static int dma = 1;
+
+#ifdef MODULE
+MODULE_PARM(dma, "i");
+MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)");
+#endif
+
+static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
+{
+ u32 val = au_readl(HOST_CONFIG(host));
+ val |= mask;
+ au_writel(val, HOST_CONFIG(host));
+ au_sync();
+}
+
+static inline void FLUSH_FIFO(struct au1xmmc_host *host)
+{
+ u32 val = au_readl(HOST_CONFIG2(host));
+
+ au_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
+ au_sync_delay(1);
+
+ /* SEND_STOP will turn off clock control - this re-enables it */
+ val &= ~SD_CONFIG2_DF;
+
+ au_writel(val, HOST_CONFIG2(host));
+ au_sync();
+}
+
+static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
+{
+ u32 val = au_readl(HOST_CONFIG(host));
+ val &= ~mask;
+ au_writel(val, HOST_CONFIG(host));
+ au_sync();
+}
+
+static inline void SEND_STOP(struct au1xmmc_host *host)
+{
+
+ /* We know the value of CONFIG2, so avoid a read we don't need */
+ u32 mask = SD_CONFIG2_EN;
+
+ WARN_ON(host->status != HOST_S_DATA);
+ host->status = HOST_S_STOP;
+
+ au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host));
+ au_sync();
+
+ /* Send the stop commmand */
+ au_writel(STOP_CMD, HOST_CMD(host));
+}
+
+static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
+{
+
+ u32 val = au1xmmc_card_table[host->id].bcsrpwr;
+
+ bcsr->board &= ~val;
+ if (state) bcsr->board |= val;
+
+ au_sync_delay(1);
+}
+
+static inline int au1xmmc_card_inserted(struct au1xmmc_host *host)
+{
+ return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus)
+ ? 1 : 0;
+}
+
+static inline int au1xmmc_card_readonly(struct au1xmmc_host *host)
+{
+ return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
+ ? 1 : 0;
+}
+
+static void au1xmmc_finish_request(struct au1xmmc_host *host)
+{
+
+ struct mmc_request *mrq = host->mrq;
+
+ host->mrq = NULL;
+ host->flags &= HOST_F_ACTIVE;
+
+ host->dma.len = 0;
+ host->dma.dir = 0;
+
+ host->pio.index = 0;
+ host->pio.offset = 0;
+ host->pio.len = 0;
+
+ host->status = HOST_S_IDLE;
+
+ bcsr->disk_leds |= (1 << 8);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void au1xmmc_tasklet_finish(unsigned long param)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+ au1xmmc_finish_request(host);
+}
+
+static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
+ struct mmc_command *cmd)
+{
+
+ u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
+
+ switch(cmd->flags) {
+ case MMC_RSP_R1:
+ mmccmd |= SD_CMD_RT_1;
+ break;
+ case MMC_RSP_R1B:
+ mmccmd |= SD_CMD_RT_1B;
+ break;
+ case MMC_RSP_R2:
+ mmccmd |= SD_CMD_RT_2;
+ break;
+ case MMC_RSP_R3:
+ mmccmd |= SD_CMD_RT_3;
+ break;
+ }
+
+ switch(cmd->opcode) {
+ case MMC_READ_SINGLE_BLOCK:
+ case SD_APP_SEND_SCR:
+ mmccmd |= SD_CMD_CT_2;
+ break;
+ case MMC_READ_MULTIPLE_BLOCK:
+ mmccmd |= SD_CMD_CT_4;
+ break;
+ case MMC_WRITE_BLOCK:
+ mmccmd |= SD_CMD_CT_1;
+ break;
+
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ mmccmd |= SD_CMD_CT_3;
+ break;
+ case MMC_STOP_TRANSMISSION:
+ mmccmd |= SD_CMD_CT_7;
+ break;
+ }
+
+ au_writel(cmd->arg, HOST_CMDARG(host));
+ au_sync();
+
+ if (wait)
+ IRQ_OFF(host, SD_CONFIG_CR);
+
+ au_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
+ au_sync();
+
+ /* Wait for the command to go on the line */
+
+ while(1) {
+ if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO))
+ break;
+ }
+
+ /* Wait for the command to come back */
+
+ if (wait) {
+ u32 status = au_readl(HOST_STATUS(host));
+
+ while(!(status & SD_STATUS_CR))
+ status = au_readl(HOST_STATUS(host));
+
+ /* Clear the CR status */
+ au_writel(SD_STATUS_CR, HOST_STATUS(host));
+
+ IRQ_ON(host, SD_CONFIG_CR);
+ }
+
+ return MMC_ERR_NONE;
+}
+
+static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
+{
+
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_data *data;
+ u32 crc;
+
+ WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP);
+
+ if (host->mrq == NULL)
+ return;
+
+ data = mrq->cmd->data;
+
+ if (status == 0)
+ status = au_readl(HOST_STATUS(host));
+
+ /* The transaction is really over when the SD_STATUS_DB bit is clear */
+
+ while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
+ status = au_readl(HOST_STATUS(host));
+
+ data->error = MMC_ERR_NONE;
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
+
+ /* Process any errors */
+
+ crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
+ if (host->flags & HOST_F_XMIT)
+ crc |= ((status & 0x07) == 0x02) ? 0 : 1;
+
+ if (crc)
+ data->error = MMC_ERR_BADCRC;
+
+ /* Clear the CRC bits */
+ au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
+
+ data->bytes_xfered = 0;
+
+ if (data->error == MMC_ERR_NONE) {
+ if (host->flags & HOST_F_DMA) {
+ u32 chan = DMA_CHANNEL(host);
+
+ chan_tab_t *c = *((chan_tab_t **) chan);
+ au1x_dma_chan_t *cp = c->chan_ptr;
+ data->bytes_xfered = cp->ddma_bytecnt;
+ }
+ else
+ data->bytes_xfered =
+ (data->blocks * (1 << data->blksz_bits)) -
+ host->pio.len;
+ }
+
+ au1xmmc_finish_request(host);
+}
+
+static void au1xmmc_tasklet_data(unsigned long param)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+
+ u32 status = au_readl(HOST_STATUS(host));
+ au1xmmc_data_complete(host, status);
+}
+
+#define AU1XMMC_MAX_TRANSFER 8
+
+static void au1xmmc_send_pio(struct au1xmmc_host *host)
+{
+
+ struct mmc_data *data = 0;
+ int sg_len, max, count = 0;
+ unsigned char *sg_ptr;
+ u32 status = 0;
+ struct scatterlist *sg;
+
+ data = host->mrq->data;
+
+ if (!(host->flags & HOST_F_XMIT))
+ return;
+
+ /* This is the pointer to the data buffer */
+ sg = &data->sg[host->pio.index];
+ sg_ptr = page_address(sg->page) + sg->offset + host->pio.offset;
+
+ /* This is the space left inside the buffer */
+ sg_len = data->sg[host->pio.index].length - host->pio.offset;
+
+ /* Check to if we need less then the size of the sg_buffer */
+
+ max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
+ if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER;
+
+ for(count = 0; count < max; count++ ) {
+ unsigned char val;
+
+ status = au_readl(HOST_STATUS(host));
+
+ if (!(status & SD_STATUS_TH))
+ break;
+
+ val = *sg_ptr++;
+
+ au_writel((unsigned long) val, HOST_TXPORT(host));
+ au_sync();
+ }
+
+ host->pio.len -= count;
+ host->pio.offset += count;
+
+ if (count == sg_len) {
+ host->pio.index++;
+ host->pio.offset = 0;
+ }
+
+ if (host->pio.len == 0) {
+ IRQ_OFF(host, SD_CONFIG_TH);
+
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
+
+ tasklet_schedule(&host->data_task);
+ }
+}
+
+static void au1xmmc_receive_pio(struct au1xmmc_host *host)
+{
+
+ struct mmc_data *data = 0;
+ int sg_len = 0, max = 0, count = 0;
+ unsigned char *sg_ptr = 0;
+ u32 status = 0;
+ struct scatterlist *sg;
+
+ data = host->mrq->data;
+
+ if (!(host->flags & HOST_F_RECV))
+ return;
+
+ max = host->pio.len;
+
+ if (host->pio.index < host->dma.len) {
+ sg = &data->sg[host->pio.index];
+ sg_ptr = page_address(sg->page) + sg->offset + host->pio.offset;
+
+ /* This is the space left inside the buffer */
+ sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
+
+ /* Check to if we need less then the size of the sg_buffer */
+ if (sg_len < max) max = sg_len;
+ }
+
+ if (max > AU1XMMC_MAX_TRANSFER)
+ max = AU1XMMC_MAX_TRANSFER;
+
+ for(count = 0; count < max; count++ ) {
+ u32 val;
+ status = au_readl(HOST_STATUS(host));
+
+ if (!(status & SD_STATUS_NE))
+ break;
+
+ if (status & SD_STATUS_RC) {
+ DEBUG("RX CRC Error [%d + %d].\n", host->id,
+ host->pio.len, count);
+ break;
+ }
+
+ if (status & SD_STATUS_RO) {
+ DEBUG("RX Overrun [%d + %d]\n", host->id,
+ host->pio.len, count);
+ break;
+ }
+ else if (status & SD_STATUS_RU) {
+ DEBUG("RX Underrun [%d + %d]\n", host->id,
+ host->pio.len, count);
+ break;
+ }
+
+ val = au_readl(HOST_RXPORT(host));
+
+ if (sg_ptr)
+ *sg_ptr++ = (unsigned char) (val & 0xFF);
+ }
+
+ host->pio.len -= count;
+ host->pio.offset += count;
+
+ if (sg_len && count == sg_len) {
+ host->pio.index++;
+ host->pio.offset = 0;
+ }
+
+ if (host->pio.len == 0) {
+ //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF);
+ IRQ_OFF(host, SD_CONFIG_NE);
+
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
+
+ tasklet_schedule(&host->data_task);
+ }
+}
+
+/* static void au1xmmc_cmd_complete
+ This is called when a command has been completed - grab the response
+ and check for errors. Then start the data transfer if it is indicated.
+*/
+
+static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
+{
+
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_command *cmd;
+ int trans;
+
+ if (!host->mrq)
+ return;
+
+ cmd = mrq->cmd;
+ cmd->error = MMC_ERR_NONE;
+
+ if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) {
+
+ /* Techincally, we should be getting all 48 bits of the response
+ * (SD_RESP1 + SD_RESP2), but because our response omits the CRC,
+ * our data ends up being shifted 8 bits to the right. In this case,
+ * that means that the OSR data starts at bit 31, so we can just
+ * read RESP0 and return that
+ */
+
+ cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
+ }
+ else if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_LONG) {
+ u32 r[4];
+ int i;
+
+ r[0] = au_readl(host->iobase + SD_RESP3);
+ r[1] = au_readl(host->iobase + SD_RESP2);
+ r[2] = au_readl(host->iobase + SD_RESP1);
+ r[3] = au_readl(host->iobase + SD_RESP0);
+
+ /* The CRC is omitted from the response, so really we only got
+ * 120 bytes, but the engine expects 128 bits, so we have to shift
+ * things up
+ */
+
+ for(i = 0; i < 4; i++) {
+ cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
+ if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+ }
+ }
+
+ /* Figure out errors */
+
+ if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
+ cmd->error = MMC_ERR_BADCRC;
+
+ trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
+
+ if (!trans || cmd->error != MMC_ERR_NONE) {
+
+ IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
+ tasklet_schedule(&host->finish_task);
+ return;
+ }
+
+ host->status = HOST_S_DATA;
+
+ if (host->flags & HOST_F_DMA) {
+ u32 channel = DMA_CHANNEL(host);
+
+ /* Start the DMA as soon as the buffer gets something in it */
+
+ if (host->flags & HOST_F_RECV) {
+ u32 mask = SD_STATUS_DB | SD_STATUS_NE;
+
+ while((status & mask) != mask)
+ status = au_readl(HOST_STATUS(host));
+ }
+
+ au1xxx_dbdma_start(channel);
+ }
+}
+
+static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
+{
+
+ unsigned int pbus = get_au1x00_speed();
+ unsigned int divisor;
+ u32 config;
+
+ /* From databook:
+ divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
+ */
+
+ pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
+ pbus /= 2;
+
+ divisor = ((pbus / rate) / 2) - 1;
+
+ config = au_readl(HOST_CONFIG(host));
+
+ config &= ~(SD_CONFIG_DIV);
+ config |= (divisor & SD_CONFIG_DIV) | SD_CONFIG_DE;
+
+ au_writel(config, HOST_CONFIG(host));
+ au_sync();
+}
+
+static int
+au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
+{
+
+ int datalen = data->blocks * (1 << data->blksz_bits);
+
+ if (dma != 0)
+ host->flags |= HOST_F_DMA;
+
+ if (data->flags & MMC_DATA_READ)
+ host->flags |= HOST_F_RECV;
+ else
+ host->flags |= HOST_F_XMIT;
+
+ if (host->mrq->stop)
+ host->flags |= HOST_F_STOP;
+
+ host->dma.dir = DMA_BIDIRECTIONAL;
+
+ host->dma.len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, host->dma.dir);
+
+ if (host->dma.len == 0)
+ return MMC_ERR_TIMEOUT;
+
+ au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+
+ if (host->flags & HOST_F_DMA) {
+ int i;
+ u32 channel = DMA_CHANNEL(host);
+
+ au1xxx_dbdma_stop(channel);
+
+ for(i = 0; i < host->dma.len; i++) {
+ u32 ret = 0, flags = DDMA_FLAGS_NOIE;
+ struct scatterlist *sg = &data->sg[i];
+ int sg_len = sg->length;
+
+ int len = (datalen > sg_len) ? sg_len : datalen;
+
+ if (i == host->dma.len - 1)
+ flags = DDMA_FLAGS_IE;
+
+ if (host->flags & HOST_F_XMIT){
+ ret = au1xxx_dbdma_put_source_flags(channel,
+ (void *) (page_address(sg->page) +
+ sg->offset),
+ len, flags);
+ }
+ else {
+ ret = au1xxx_dbdma_put_dest_flags(channel,
+ (void *) (page_address(sg->page) +
+ sg->offset),
+ len, flags);
+ }
+
+ if (!ret)
+ goto dataerr;
+
+ datalen -= len;
+ }
+ }
+ else {
+ host->pio.index = 0;
+ host->pio.offset = 0;
+ host->pio.len = datalen;
+
+ if (host->flags & HOST_F_XMIT)
+ IRQ_ON(host, SD_CONFIG_TH);
+ else
+ IRQ_ON(host, SD_CONFIG_NE);
+ //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
+ }
+
+ return MMC_ERR_NONE;
+
+ dataerr:
+ dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
+ return MMC_ERR_TIMEOUT;
+}
+
+/* static void au1xmmc_request
+ This actually starts a command or data transaction
+*/
+
+static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
+{
+
+ struct au1xmmc_host *host = mmc_priv(mmc);
+ int ret = MMC_ERR_NONE;
+
+ WARN_ON(irqs_disabled());
+ WARN_ON(host->status != HOST_S_IDLE);
+
+ host->mrq = mrq;
+ host->status = HOST_S_CMD;
+
+ bcsr->disk_leds &= ~(1 << 8);
+
+ if (mrq->data) {
+ FLUSH_FIFO(host);
+ ret = au1xmmc_prepare_data(host, mrq->data);
+ }
+
+ if (ret == MMC_ERR_NONE)
+ ret = au1xmmc_send_command(host, 0, mrq->cmd);
+
+ if (ret != MMC_ERR_NONE) {
+ mrq->cmd->error = ret;
+ au1xmmc_finish_request(host);
+ }
+}
+
+static void au1xmmc_reset_controller(struct au1xmmc_host *host)
+{
+
+ /* Apply the clock */
+ au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
+ au_sync_delay(1);
+
+ au_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
+ au_sync_delay(5);
+
+ au_writel(~0, HOST_STATUS(host));
+ au_sync();
+
+ au_writel(0, HOST_BLKSIZE(host));
+ au_writel(0x001fffff, HOST_TIMEOUT(host));
+ au_sync();
+
+ au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
+ au_sync();
+
+ au_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
+ au_sync_delay(1);
+
+ au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
+ au_sync();
+
+ /* Configure interrupts */
+ au_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
+ au_sync();
+}
+
+
+static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
+{
+ struct au1xmmc_host *host = mmc_priv(mmc);
+
+ DEBUG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
+ host->id, ios->power_mode, ios->clock, ios->vdd,
+ ios->bus_mode);
+
+ if (ios->power_mode == MMC_POWER_OFF)
+ au1xmmc_set_power(host, 0);
+ else if (ios->power_mode == MMC_POWER_ON) {
+ au1xmmc_set_power(host, 1);
+ }
+
+ if (ios->clock && ios->clock != host->clock) {
+ au1xmmc_set_clock(host, ios->clock);
+ host->clock = ios->clock;
+ }
+}
+
+static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
+ u32 status;
+
+ /* Avoid spurious interrupts */
+
+ if (!host->mrq)
+ return;
+
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
+
+ tasklet_schedule(&host->data_task);
+}
+
+#define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
+#define STATUS_DATA_IN (SD_STATUS_NE)
+#define STATUS_DATA_OUT (SD_STATUS_TH)
+
+static irqreturn_t au1xmmc_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+
+ u32 status;
+ int i, ret = 0;
+
+ disable_irq(AU1100_SD_IRQ);
+
+ for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
+ struct au1xmmc_host * host = au1xmmc_hosts[i];
+ u32 handled = 1;
+
+ status = au_readl(HOST_STATUS(host));
+
+ if (host->mrq && (status & STATUS_TIMEOUT)) {
+ if (status & SD_STATUS_RAT)
+ host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+
+ else if (status & SD_STATUS_DT)
+ host->mrq->data->error = MMC_ERR_TIMEOUT;
+
+ /* In PIO mode, interrupts might still be enabled */
+ IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
+
+ //IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF);
+ tasklet_schedule(&host->finish_task);
+ }
+#if 0
+ else if (status & SD_STATUS_DD) {
+
+ /* Sometimes we get a DD before a NE in PIO mode */
+
+ if (!(host->flags & HOST_F_DMA) &&
+ (status & SD_STATUS_NE))
+ au1xmmc_receive_pio(host);
+ else {
+ au1xmmc_data_complete(host, status);
+ //tasklet_schedule(&host->data_task);
+ }
+ }
+#endif
+ else if (status & (SD_STATUS_CR)) {
+ if (host->status == HOST_S_CMD)
+ au1xmmc_cmd_complete(host,status);
+ }
+ else if (!(host->flags & HOST_F_DMA)) {
+ if ((host->flags & HOST_F_XMIT) &&
+ (status & STATUS_DATA_OUT))
+ au1xmmc_send_pio(host);
+ else if ((host->flags & HOST_F_RECV) &&
+ (status & STATUS_DATA_IN))
+ au1xmmc_receive_pio(host);
+ }
+ else if (status & 0x203FBC70) {
+ DEBUG("Unhandled status %8.8x\n", host->id, status);
+ handled = 0;
+ }
+
+ au_writel(status, HOST_STATUS(host));
+ au_sync();
+
+ ret |= handled;
+ }
+
+ enable_irq(AU1100_SD_IRQ);
+ return ret;
+}
+
+static void au1xmmc_poll_event(unsigned long arg)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) arg;
+
+ int card = au1xmmc_card_inserted(host);
+ int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0;
+
+ if (card != controller) {
+ host->flags &= ~HOST_F_ACTIVE;
+ if (card) host->flags |= HOST_F_ACTIVE;
+ mmc_detect_change(host->mmc, 0);
+ }
+
+ if (host->mrq != NULL) {
+ u32 status = au_readl(HOST_STATUS(host));
+ DEBUG("PENDING - %8.8x\n", host->id, status);
+ }
+
+ mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
+}
+
+static dbdev_tab_t au1xmmc_mem_dbdev =
+{
+ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0
+};
+
+static void au1xmmc_init_dma(struct au1xmmc_host *host)
+{
+
+ u32 rxchan, txchan;
+
+ int txid = au1xmmc_card_table[host->id].tx_devid;
+ int rxid = au1xmmc_card_table[host->id].rx_devid;
+
+ /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+ of 8 bits. And since devices are shared, we need to create
+ our own to avoid freaking out other devices
+ */
+
+ int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+
+ txchan = au1xxx_dbdma_chan_alloc(memid, txid,
+ au1xmmc_dma_callback, (void *) host);
+
+ rxchan = au1xxx_dbdma_chan_alloc(rxid, memid,
+ au1xmmc_dma_callback, (void *) host);
+
+ au1xxx_dbdma_set_devwidth(txchan, 8);
+ au1xxx_dbdma_set_devwidth(rxchan, 8);
+
+ au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT);
+ au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT);
+
+ host->tx_chan = txchan;
+ host->rx_chan = rxchan;
+}
+
+struct mmc_host_ops au1xmmc_ops = {
+ .request = au1xmmc_request,
+ .set_ios = au1xmmc_set_ios,
+};
+
+static int au1xmmc_probe(struct device *dev)
+{
+
+ int i, ret = 0;
+
+ /* THe interrupt is shared among all controllers */
+ ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, SA_INTERRUPT, "MMC", 0);
+
+ if (ret) {
+ printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n",
+ AU1100_SD_IRQ, ret);
+ return -ENXIO;
+ }
+
+ disable_irq(AU1100_SD_IRQ);
+
+ for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
+ struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev);
+ struct au1xmmc_host *host = 0;
+
+ if (!mmc) {
+ printk(DRIVER_NAME "ERROR: no mem for host %d\n", i);
+ au1xmmc_hosts[i] = 0;
+ continue;
+ }
+
+ mmc->ops = &au1xmmc_ops;
+
+ mmc->f_min = 450000;
+ mmc->f_max = 24000000;
+
+ mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
+ mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
+
+ mmc->ocr_avail = AU1XMMC_OCR;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->id = i;
+ host->iobase = au1xmmc_card_table[host->id].iobase;
+ host->clock = 0;
+ host->power_mode = MMC_POWER_OFF;
+
+ host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0;
+ host->status = HOST_S_IDLE;
+
+ init_timer(&host->timer);
+
+ host->timer.function = au1xmmc_poll_event;
+ host->timer.data = (unsigned long) host;
+ host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT;
+
+ tasklet_init(&host->data_task, au1xmmc_tasklet_data,
+ (unsigned long) host);
+
+ tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
+ (unsigned long) host);
+
+ spin_lock_init(&host->lock);
+
+ if (dma != 0)
+ au1xmmc_init_dma(host);
+
+ au1xmmc_reset_controller(host);
+
+ mmc_add_host(mmc);
+ au1xmmc_hosts[i] = host;
+
+ add_timer(&host->timer);
+
+ printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n",
+ host->id, host->iobase, dma ? "dma" : "pio");
+ }
+
+ enable_irq(AU1100_SD_IRQ);
+
+ return 0;
+}
+
+static int au1xmmc_remove(struct device *dev)
+{
+
+ int i;
+
+ disable_irq(AU1100_SD_IRQ);
+
+ for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
+ struct au1xmmc_host *host = au1xmmc_hosts[i];
+ if (!host) continue;
+
+ tasklet_kill(&host->data_task);
+ tasklet_kill(&host->finish_task);
+
+ del_timer_sync(&host->timer);
+ au1xmmc_set_power(host, 0);
+
+ mmc_remove_host(host->mmc);
+
+ au1xxx_dbdma_chan_free(host->tx_chan);
+ au1xxx_dbdma_chan_free(host->rx_chan);
+
+ au_writel(0x0, HOST_ENABLE(host));
+ au_sync();
+ }
+
+ free_irq(AU1100_SD_IRQ, 0);
+ return 0;
+}
+
+static struct device_driver au1xmmc_driver = {
+ .name = DRIVER_NAME,
+ .bus = &platform_bus_type,
+ .probe = au1xmmc_probe,
+ .remove = au1xmmc_remove,
+ .suspend = NULL,
+ .resume = NULL
+};
+
+static int __init au1xmmc_init(void)
+{
+ return driver_register(&au1xmmc_driver);
+}
+
+static void __exit au1xmmc_exit(void)
+{
+ driver_unregister(&au1xmmc_driver);
+}
+
+module_init(au1xmmc_init);
+module_exit(au1xmmc_exit);
+
+#ifdef MODULE
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
+MODULE_LICENSE("GPL");
+#endif
+
diff --git a/drivers/mmc/au1xmmc.h b/drivers/mmc/au1xmmc.h
new file mode 100644
index 0000000..341cbdf
--- /dev/null
+++ b/drivers/mmc/au1xmmc.h
@@ -0,0 +1,96 @@
+#ifndef _AU1XMMC_H_
+#define _AU1XMMC_H_
+
+/* Hardware definitions */
+
+#define AU1XMMC_DESCRIPTOR_COUNT 1
+#define AU1XMMC_DESCRIPTOR_SIZE 2048
+
+#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
+ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
+
+/* Easy access macros */
+
+#define HOST_STATUS(h) ((h)->iobase + SD_STATUS)
+#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG)
+#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE)
+#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT)
+#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT)
+#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG)
+#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
+#define HOST_CMD(h) ((h)->iobase + SD_CMD)
+#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
+#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
+#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG)
+
+#define DMA_CHANNEL(h) \
+ ( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
+
+/* This gives us a hard value for the stop command that we can write directly
+ * to the command register
+ */
+
+#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO)
+
+/* This is the set of interrupts that we configure by default */
+
+#if 0
+#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \
+ SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
+#endif
+
+#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \
+ SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
+/* The poll event (looking for insert/remove events runs twice a second */
+#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
+
+struct au1xmmc_host {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+
+ u32 id;
+
+ u32 flags;
+ u32 iobase;
+ u32 clock;
+ u32 bus_width;
+ u32 power_mode;
+
+ int status;
+
+ struct {
+ int len;
+ int dir;
+ } dma;
+
+ struct {
+ int index;
+ int offset;
+ int len;
+ } pio;
+
+ u32 tx_chan;
+ u32 rx_chan;
+
+ struct timer_list timer;
+ struct tasklet_struct finish_task;
+ struct tasklet_struct data_task;
+
+ spinlock_t lock;
+};
+
+/* Status flags used by the host structure */
+
+#define HOST_F_XMIT 0x0001
+#define HOST_F_RECV 0x0002
+#define HOST_F_DMA 0x0010
+#define HOST_F_ACTIVE 0x0100
+#define HOST_F_STOP 0x1000
+
+#define HOST_S_IDLE 0x0001
+#define HOST_S_CMD 0x0002
+#define HOST_S_DATA 0x0003
+#define HOST_S_STOP 0x0004
+
+#endif
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fee8c5c..6d4f9ce 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1163,38 +1163,74 @@
be called ibmveth.
config IBM_EMAC
- bool "IBM PPC4xx EMAC driver support"
+ tristate "PowerPC 4xx on-chip Ethernet support"
depends on 4xx
- select CRC32
- ---help---
- This driver supports the IBM PPC4xx EMAC family of on-chip
- Ethernet controllers.
-
-config IBM_EMAC_ERRMSG
- bool "Verbose error messages"
- depends on IBM_EMAC && BROKEN
+ help
+ This driver supports the PowerPC 4xx EMAC family of on-chip
+ Ethernet controllers.
config IBM_EMAC_RXB
int "Number of receive buffers"
depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "64"
+ default "128"
config IBM_EMAC_TXB
int "Number of transmit buffers"
depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "8"
+ default "64"
-config IBM_EMAC_FGAP
- int "Frame gap"
+config IBM_EMAC_POLL_WEIGHT
+ int "MAL NAPI polling weight"
depends on IBM_EMAC
- default "8"
+ default "32"
-config IBM_EMAC_SKBRES
- int "Skb reserve amount"
+config IBM_EMAC_RX_COPY_THRESHOLD
+ int "RX skb copy threshold (bytes)"
+ depends on IBM_EMAC
+ default "256"
+
+config IBM_EMAC_RX_SKB_HEADROOM
+ int "Additional RX skb headroom (bytes)"
depends on IBM_EMAC
default "0"
+ help
+ Additional receive skb headroom. Note, that driver
+ will always reserve at least 2 bytes to make IP header
+ aligned, so usualy there is no need to add any additional
+ headroom.
+
+ If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+ bool "PHY Rx clock workaround"
+ depends on IBM_EMAC && (405EP || 440GX || 440EP)
+ help
+ Enable this if EMAC attached to a PHY which doesn't generate
+ RX clock if there is no link, if this is the case, you will
+ see "TX disable timeout" or "RX disable timeout" in the system
+ log.
+
+ If unsure, say N.
+
+config IBM_EMAC_DEBUG
+ bool "Debugging"
+ depends on IBM_EMAC
+ default n
+
+config IBM_EMAC_ZMII
+ bool
+ depends on IBM_EMAC && (NP405H || NP405L || 44x)
+ default y
+
+config IBM_EMAC_RGMII
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
+
+config IBM_EMAC_TAH
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
@@ -1775,6 +1811,7 @@
controller on the Renesas H8/300 processor.
source "drivers/net/fec_8xx/Kconfig"
+source "drivers/net/fs_enet/Kconfig"
endmenu
@@ -2201,8 +2238,8 @@
depends on PCI
---help---
This driver supports the 10Gbe XFrame NIC of S2IO.
- For help regarding driver compilation, installation and
- tuning please look into ~/drivers/net/s2io/README.txt.
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/s2io.txt>.
config S2IO_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1a84e04..7c313cb 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -203,3 +203,6 @@
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+obj-$(CONFIG_FS_ENET) += fs_enet/
+
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index dbecc6b..b8953de 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -871,10 +871,8 @@
if (ap->info)
pci_free_consistent(ap->pdev, sizeof(struct ace_info),
ap->info, ap->info_dma);
- if (ap->skb)
- kfree(ap->skb);
- if (ap->trace_buf)
- kfree(ap->trace_buf);
+ kfree(ap->skb);
+ kfree(ap->trace_buf);
if (dev->irq)
free_irq(dev->irq, dev);
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
old mode 100755
new mode 100644
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
old mode 100755
new mode 100644
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 7850691..332e995 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1606,8 +1606,7 @@
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
reset_mac(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (i = 0; i < NUM_RX_DMA; i++) {
if (aup->rx_db_inuse[i])
ReleaseDB(aup, aup->rx_db_inuse[i]);
@@ -1806,8 +1805,7 @@
if (dev) {
aup = (struct au1000_private *) dev->priv;
unregister_netdev(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (j = 0; j < NUM_RX_DMA; j++) {
if (aup->rx_db_inuse[j])
ReleaseDB(aup, aup->rx_db_inuse[j]);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 282ebd1..0ee3e27 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/version.h>
+#include <linux/dma-mapping.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -1130,14 +1131,10 @@
*/
static void b44_free_consistent(struct b44 *bp)
{
- if (bp->rx_buffers) {
- kfree(bp->rx_buffers);
- bp->rx_buffers = NULL;
- }
- if (bp->tx_buffers) {
- kfree(bp->tx_buffers);
- bp->tx_buffers = NULL;
- }
+ kfree(bp->rx_buffers);
+ bp->rx_buffers = NULL;
+ kfree(bp->tx_buffers);
+ bp->tx_buffers = NULL;
if (bp->rx_ring) {
if (bp->flags & B44_FLAG_RX_RING_HACK) {
dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma,
@@ -1619,14 +1616,14 @@
cmd->advertising = 0;
if (bp->flags & B44_FLAG_ADV_10HALF)
- cmd->advertising |= ADVERTISE_10HALF;
+ cmd->advertising |= ADVERTISED_10baseT_Half;
if (bp->flags & B44_FLAG_ADV_10FULL)
- cmd->advertising |= ADVERTISE_10FULL;
+ cmd->advertising |= ADVERTISED_10baseT_Full;
if (bp->flags & B44_FLAG_ADV_100HALF)
- cmd->advertising |= ADVERTISE_100HALF;
+ cmd->advertising |= ADVERTISED_100baseT_Half;
if (bp->flags & B44_FLAG_ADV_100FULL)
- cmd->advertising |= ADVERTISE_100FULL;
- cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ cmd->advertising |= ADVERTISED_100baseT_Full;
+ cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
SPEED_100 : SPEED_10;
cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
@@ -2044,6 +2041,8 @@
b44_free_rings(bp);
spin_unlock_irq(&bp->lock);
+
+ free_irq(dev->irq, dev);
pci_disable_device(pdev);
return 0;
}
@@ -2060,6 +2059,9 @@
if (!netif_running(dev))
return 0;
+ if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev))
+ printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+
spin_lock_irq(&bp->lock);
b44_init_rings(bp);
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 60dba4a..73f2fcf 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1689,10 +1689,8 @@
{
macio_unregister_driver(&bmac_driver);
- if (bmac_emergency_rxbuf != NULL) {
- kfree(bmac_emergency_rxbuf);
- bmac_emergency_rxbuf = NULL;
- }
+ kfree(bmac_emergency_rxbuf);
+ bmac_emergency_rxbuf = NULL;
}
MODULE_AUTHOR("Randy Gobbel/Paul Mackerras");
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 3a2ace0..11d2523 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -314,20 +314,16 @@
bp->tx_desc_ring, bp->tx_desc_mapping);
bp->tx_desc_ring = NULL;
}
- if (bp->tx_buf_ring) {
- kfree(bp->tx_buf_ring);
- bp->tx_buf_ring = NULL;
- }
+ kfree(bp->tx_buf_ring);
+ bp->tx_buf_ring = NULL;
if (bp->rx_desc_ring) {
pci_free_consistent(bp->pdev,
sizeof(struct rx_bd) * RX_DESC_CNT,
bp->rx_desc_ring, bp->rx_desc_mapping);
bp->rx_desc_ring = NULL;
}
- if (bp->rx_buf_ring) {
- kfree(bp->rx_buf_ring);
- bp->rx_buf_ring = NULL;
- }
+ kfree(bp->rx_buf_ring);
+ bp->rx_buf_ring = NULL;
}
static int
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6b9acc7..9c7feae 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -965,11 +965,8 @@
if(rxdr->desc)
pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
- if(txdr->buffer_info)
- kfree(txdr->buffer_info);
- if(rxdr->buffer_info)
- kfree(rxdr->buffer_info);
-
+ kfree(txdr->buffer_info);
+ kfree(rxdr->buffer_info);
return;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 6b72f6a..efbbda7 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -191,8 +191,8 @@
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
static int e1000_resume(struct pci_dev *pdev);
#endif
@@ -1149,7 +1149,8 @@
int size;
size = sizeof(struct e1000_buffer) * txdr->count;
- txdr->buffer_info = vmalloc(size);
+
+ txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
if(!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the transmit descriptor ring\n");
@@ -1366,7 +1367,7 @@
int size, desc_len;
size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vmalloc(size);
+ rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
if (!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
@@ -4193,6 +4194,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int
e1000_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -4289,7 +4291,6 @@
return 0;
}
-#ifdef CONFIG_PM
static int
e1000_resume(struct pci_dev *pdev)
{
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index dcb3028..1ce2c67 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1797,10 +1797,9 @@
MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
MODULE_LICENSE("GPL");
-static int num_params;
-module_param_array(io, int, &num_params, 0);
-module_param_array(irq, int, &num_params, 0);
-module_param_array(mem, int, &num_params, 0);
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
new file mode 100644
index 0000000..6aaee67
--- /dev/null
+++ b/drivers/net/fs_enet/Kconfig
@@ -0,0 +1,20 @@
+config FS_ENET
+ tristate "Freescale Ethernet Driver"
+ depends on NET_ETHERNET && (CPM1 || CPM2)
+ select MII
+
+config FS_ENET_HAS_SCC
+ bool "Chip has an SCC usable for ethernet"
+ depends on FS_ENET && (CPM1 || CPM2)
+ default y
+
+config FS_ENET_HAS_FCC
+ bool "Chip has an FCC usable for ethernet"
+ depends on FS_ENET && CPM2
+ default y
+
+config FS_ENET_HAS_FEC
+ bool "Chip has an FEC usable for ethernet"
+ depends on FS_ENET && CPM1
+ default y
+
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
new file mode 100644
index 0000000..d6dd3f2
--- /dev/null
+++ b/drivers/net/fs_enet/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Freescale Ethernet controllers
+#
+
+obj-$(CONFIG_FS_ENET) += fs_enet.o
+
+obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o
+obj-$(CONFIG_8260) += mac-fcc.o
+
+fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
new file mode 100644
index 0000000..44fac73
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -0,0 +1,1226 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
+ * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <linux/vmalloc.h>
+#include <asm/pgtable.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+static char version[] __devinitdata =
+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n";
+
+MODULE_AUTHOR("Pantelis Antoniou <panto@intracom.gr>");
+MODULE_DESCRIPTION("Freescale Ethernet Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+MODULE_PARM(fs_enet_debug, "i");
+MODULE_PARM_DESC(fs_enet_debug,
+ "Freescale bitmapped debugging message enable value");
+
+int fs_enet_debug = -1; /* -1 == use FS_ENET_DEF_MSG_ENABLE as value */
+
+static void fs_set_multicast_list(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ (*fep->ops->set_multicast_list)(dev);
+}
+
+/* NAPI receive function */
+static int fs_enet_rx_napi(struct net_device *dev, int *budget)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ cbd_t *bdp;
+ struct sk_buff *skb, *skbn, *skbt;
+ int received = 0;
+ u16 pkt_len, sc;
+ int curidx;
+ int rx_work_limit = 0; /* pacify gcc */
+
+ rx_work_limit = min(dev->quota, *budget);
+
+ if (!netif_running(dev))
+ return 0;
+
+ /*
+ * First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ /* clear RX status bits for napi*/
+ (*fep->ops->napi_clear_rx_event)(dev);
+
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
+
+ curidx = bdp - fep->rx_bd_base;
+
+ /*
+ * Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((sc & BD_ENET_RX_LAST) == 0)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s rcv is not +last\n",
+ dev->name);
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
+ BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ /* Frame too long or too short. */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ fep->stats.rx_length_errors++;
+ /* Frame alignment */
+ if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
+ fep->stats.rx_frame_errors++;
+ /* CRC Error */
+ if (sc & BD_ENET_RX_CR)
+ fep->stats.rx_crc_errors++;
+ /* FIFO overrun */
+ if (sc & BD_ENET_RX_OV)
+ fep->stats.rx_crc_errors++;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ skbn = skb;
+
+ } else {
+
+ /* napi, got packet but no quota */
+ if (--rx_work_limit < 0)
+ break;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ /*
+ * Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
+ fep->stats.rx_bytes += pkt_len + 4;
+
+ if (pkt_len <= fpi->rx_copybreak) {
+ /* +2 to make IP header L1 cache aligned */
+ skbn = dev_alloc_skb(pkt_len + 2);
+ if (skbn != NULL) {
+ skb_reserve(skbn, 2); /* align IP header */
+ memcpy(skbn->data, skb->data, pkt_len);
+ /* swap */
+ skbt = skb;
+ skb = skbn;
+ skbn = skbt;
+ }
+ } else
+ skbn = dev_alloc_skb(ENET_RX_FRSIZE);
+
+ if (skbn != NULL) {
+ skb->dev = dev;
+ skb_put(skb, pkt_len); /* Make room */
+ skb->protocol = eth_type_trans(skb, dev);
+ received++;
+ netif_receive_skb(skb);
+ } else {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, dropping packet.\n",
+ dev->name);
+ fep->stats.rx_dropped++;
+ skbn = skb;
+ }
+ }
+
+ fep->rx_skbuff[curidx] = skbn;
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
+
+ /*
+ * Update BD pointer to next entry.
+ */
+ if ((sc & BD_ENET_RX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->rx_bd_base;
+
+ (*fep->ops->rx_bd_done)(dev);
+ }
+
+ fep->cur_rx = bdp;
+
+ dev->quota -= received;
+ *budget -= received;
+
+ if (rx_work_limit < 0)
+ return 1; /* not done */
+
+ /* done */
+ netif_rx_complete(dev);
+
+ (*fep->ops->napi_enable_rx)(dev);
+
+ return 0;
+}
+
+/* non NAPI receive function */
+static int fs_enet_rx_non_napi(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ cbd_t *bdp;
+ struct sk_buff *skb, *skbn, *skbt;
+ int received = 0;
+ u16 pkt_len, sc;
+ int curidx;
+ /*
+ * First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
+
+ curidx = bdp - fep->rx_bd_base;
+
+ /*
+ * Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((sc & BD_ENET_RX_LAST) == 0)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s rcv is not +last\n",
+ dev->name);
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
+ BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ /* Frame too long or too short. */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ fep->stats.rx_length_errors++;
+ /* Frame alignment */
+ if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
+ fep->stats.rx_frame_errors++;
+ /* CRC Error */
+ if (sc & BD_ENET_RX_CR)
+ fep->stats.rx_crc_errors++;
+ /* FIFO overrun */
+ if (sc & BD_ENET_RX_OV)
+ fep->stats.rx_crc_errors++;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ skbn = skb;
+
+ } else {
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ /*
+ * Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
+ fep->stats.rx_bytes += pkt_len + 4;
+
+ if (pkt_len <= fpi->rx_copybreak) {
+ /* +2 to make IP header L1 cache aligned */
+ skbn = dev_alloc_skb(pkt_len + 2);
+ if (skbn != NULL) {
+ skb_reserve(skbn, 2); /* align IP header */
+ memcpy(skbn->data, skb->data, pkt_len);
+ /* swap */
+ skbt = skb;
+ skb = skbn;
+ skbn = skbt;
+ }
+ } else
+ skbn = dev_alloc_skb(ENET_RX_FRSIZE);
+
+ if (skbn != NULL) {
+ skb->dev = dev;
+ skb_put(skb, pkt_len); /* Make room */
+ skb->protocol = eth_type_trans(skb, dev);
+ received++;
+ netif_rx(skb);
+ } else {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, dropping packet.\n",
+ dev->name);
+ fep->stats.rx_dropped++;
+ skbn = skb;
+ }
+ }
+
+ fep->rx_skbuff[curidx] = skbn;
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
+
+ /*
+ * Update BD pointer to next entry.
+ */
+ if ((sc & BD_ENET_RX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->rx_bd_base;
+
+ (*fep->ops->rx_bd_done)(dev);
+ }
+
+ fep->cur_rx = bdp;
+
+ return 0;
+}
+
+static void fs_enet_tx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int dirtyidx, do_wake, do_restart;
+ u16 sc;
+
+ spin_lock(&fep->lock);
+ bdp = fep->dirty_tx;
+
+ do_wake = do_restart = 0;
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) {
+
+ dirtyidx = bdp - fep->tx_bd_base;
+
+ if (fep->tx_free == fep->tx_ring)
+ break;
+
+ skb = fep->tx_skbuff[dirtyidx];
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) {
+
+ if (sc & BD_ENET_TX_HB) /* No heartbeat */
+ fep->stats.tx_heartbeat_errors++;
+ if (sc & BD_ENET_TX_LC) /* Late collision */
+ fep->stats.tx_window_errors++;
+ if (sc & BD_ENET_TX_RL) /* Retrans limit */
+ fep->stats.tx_aborted_errors++;
+ if (sc & BD_ENET_TX_UN) /* Underrun */
+ fep->stats.tx_fifo_errors++;
+ if (sc & BD_ENET_TX_CSL) /* Carrier lost */
+ fep->stats.tx_carrier_errors++;
+
+ if (sc & (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
+ fep->stats.tx_errors++;
+ do_restart = 1;
+ }
+ } else
+ fep->stats.tx_packets++;
+
+ if (sc & BD_ENET_TX_READY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s HEY! Enet xmit interrupt and TX_READY.\n",
+ dev->name);
+
+ /*
+ * Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (sc & BD_ENET_TX_DEF)
+ fep->stats.collisions++;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ /*
+ * Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_irq(skb);
+ fep->tx_skbuff[dirtyidx] = NULL;
+
+ /*
+ * Update pointer to next buffer descriptor to be transmitted.
+ */
+ if ((sc & BD_ENET_TX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->tx_bd_base;
+
+ /*
+ * Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (!fep->tx_free++)
+ do_wake = 1;
+ }
+
+ fep->dirty_tx = bdp;
+
+ if (do_restart)
+ (*fep->ops->tx_restart)(dev);
+
+ spin_unlock(&fep->lock);
+
+ if (do_wake)
+ netif_wake_queue(dev);
+}
+
+/*
+ * The interrupt handler.
+ * This is called from the MPC core interrupt.
+ */
+static irqreturn_t
+fs_enet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+ u32 int_events;
+ u32 int_clr_events;
+ int nr, napi_ok;
+ int handled;
+
+ fep = netdev_priv(dev);
+ fpi = fep->fpi;
+
+ nr = 0;
+ while ((int_events = (*fep->ops->get_int_events)(dev)) != 0) {
+
+ nr++;
+
+ int_clr_events = int_events;
+ if (fpi->use_napi)
+ int_clr_events &= ~fep->ev_napi_rx;
+
+ (*fep->ops->clear_int_events)(dev, int_clr_events);
+
+ if (int_events & fep->ev_err)
+ (*fep->ops->ev_error)(dev, int_events);
+
+ if (int_events & fep->ev_rx) {
+ if (!fpi->use_napi)
+ fs_enet_rx_non_napi(dev);
+ else {
+ napi_ok = netif_rx_schedule_prep(dev);
+
+ (*fep->ops->napi_disable_rx)(dev);
+ (*fep->ops->clear_int_events)(dev, fep->ev_napi_rx);
+
+ /* NOTE: it is possible for FCCs in NAPI mode */
+ /* to submit a spurious interrupt while in poll */
+ if (napi_ok)
+ __netif_rx_schedule(dev);
+ }
+ }
+
+ if (int_events & fep->ev_tx)
+ fs_enet_tx(dev);
+ }
+
+ handled = nr > 0;
+ return IRQ_RETVAL(handled);
+}
+
+void fs_init_bds(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int i;
+
+ fs_cleanup_bds(dev);
+
+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ fep->tx_free = fep->tx_ring;
+ fep->cur_rx = fep->rx_bd_base;
+
+ /*
+ * Initialize the receive buffer descriptors.
+ */
+ for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
+ skb = dev_alloc_skb(ENET_RX_FRSIZE);
+ if (skb == NULL) {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, unable to allocate skb\n",
+ dev->name);
+ break;
+ }
+ fep->rx_skbuff[i] = skb;
+ skb->dev = dev;
+ CBDW_BUFADDR(bdp,
+ dma_map_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0); /* zero */
+ CBDW_SC(bdp, BD_ENET_RX_EMPTY |
+ ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP));
+ }
+ /*
+ * if we failed, fillup remainder
+ */
+ for (; i < fep->rx_ring; i++, bdp++) {
+ fep->rx_skbuff[i] = NULL;
+ CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP);
+ }
+
+ /*
+ * ...and the same for transmit.
+ */
+ for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) {
+ fep->tx_skbuff[i] = NULL;
+ CBDW_BUFADDR(bdp, 0);
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP);
+ }
+}
+
+void fs_cleanup_bds(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct sk_buff *skb;
+ int i;
+
+ /*
+ * Reset SKB transmit buffers.
+ */
+ for (i = 0; i < fep->tx_ring; i++) {
+ if ((skb = fep->tx_skbuff[i]) == NULL)
+ continue;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ fep->tx_skbuff[i] = NULL;
+ dev_kfree_skb(skb);
+ }
+
+ /*
+ * Reset SKB receive buffers
+ */
+ for (i = 0; i < fep->rx_ring; i++) {
+ if ((skb = fep->rx_skbuff[i]) == NULL)
+ continue;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ fep->rx_skbuff[i] = NULL;
+
+ dev_kfree_skb(skb);
+ }
+}
+
+/**********************************************************************************/
+
+static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ int curidx;
+ u16 sc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fep->tx_lock, flags);
+
+ /*
+ * Fill in a Tx ring entry
+ */
+ bdp = fep->cur_tx;
+
+ if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) {
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&fep->tx_lock, flags);
+
+ /*
+ * Ooops. All transmit buffers are full. Bail out.
+ * This should not happen, since the tx queue should be stopped.
+ */
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s tx queue full!.\n", dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ curidx = bdp - fep->tx_bd_base;
+ /*
+ * Clear all of the status flags.
+ */
+ CBDC_SC(bdp, BD_ENET_TX_STATS);
+
+ /*
+ * Save skb pointer.
+ */
+ fep->tx_skbuff[curidx] = skb;
+
+ fep->stats.tx_bytes += skb->len;
+
+ /*
+ * Push the data cache so the CPM does not get stale memory data.
+ */
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev,
+ skb->data, skb->len, DMA_TO_DEVICE));
+ CBDW_DATLEN(bdp, skb->len);
+
+ dev->trans_start = jiffies;
+
+ /*
+ * If this was the last BD in the ring, start at the beginning again.
+ */
+ if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0)
+ fep->cur_tx++;
+ else
+ fep->cur_tx = fep->tx_bd_base;
+
+ if (!--fep->tx_free)
+ netif_stop_queue(dev);
+
+ /* Trigger transmission start */
+ sc = BD_ENET_TX_READY | BD_ENET_TX_INTR |
+ BD_ENET_TX_LAST | BD_ENET_TX_TC;
+
+ /* note that while FEC does not have this bit
+ * it marks it as available for software use
+ * yay for hw reuse :) */
+ if (skb->len <= 60)
+ sc |= BD_ENET_TX_PAD;
+ CBDS_SC(bdp, sc);
+
+ (*fep->ops->tx_kickstart)(dev);
+
+ spin_unlock_irqrestore(&fep->tx_lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static int fs_request_irq(struct net_device *dev, int irq, const char *name,
+ irqreturn_t (*irqf)(int irq, void *dev_id, struct pt_regs *regs))
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ (*fep->ops->pre_request_irq)(dev, irq);
+ return request_irq(irq, irqf, SA_SHIRQ, name, dev);
+}
+
+static void fs_free_irq(struct net_device *dev, int irq)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ free_irq(irq, dev);
+ (*fep->ops->post_free_irq)(dev, irq);
+}
+
+/**********************************************************************************/
+
+/* This interrupt occurs when the PHY detects a link change. */
+static irqreturn_t
+fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+
+ fep = netdev_priv(dev);
+ fpi = fep->fpi;
+
+ /*
+ * Acknowledge the interrupt if possible. If we have not
+ * found the PHY yet we can't process or acknowledge the
+ * interrupt now. Instead we ignore this interrupt for now,
+ * which we can do since it is edge triggered. It will be
+ * acknowledged later by fs_enet_open().
+ */
+ if (!fep->phy)
+ return IRQ_NONE;
+
+ fs_mii_ack_int(dev);
+ fs_mii_link_status_change_check(dev, 0);
+
+ return IRQ_HANDLED;
+}
+
+static void fs_timeout(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int wake = 0;
+
+ fep->stats.tx_errors++;
+
+ spin_lock_irqsave(&fep->lock, flags);
+
+ if (dev->flags & IFF_UP) {
+ (*fep->ops->stop)(dev);
+ (*fep->ops->restart)(dev);
+ }
+
+ wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ if (wake)
+ netif_wake_queue(dev);
+}
+
+static int fs_enet_open(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ int r;
+
+ /* Install our interrupt handler. */
+ r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Could not allocate FEC IRQ!", dev->name);
+ return -EINVAL;
+ }
+
+ /* Install our phy interrupt handler */
+ if (fpi->phy_irq != -1) {
+
+ r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Could not allocate PHY IRQ!", dev->name);
+ fs_free_irq(dev, fep->interrupt);
+ return -EINVAL;
+ }
+ }
+
+ fs_mii_startup(dev);
+ netif_carrier_off(dev);
+ fs_mii_link_status_change_check(dev, 1);
+
+ return 0;
+}
+
+static int fs_enet_close(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+ fs_mii_shutdown(dev);
+
+ spin_lock_irqsave(&fep->lock, flags);
+ (*fep->ops->stop)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ /* release any irqs */
+ if (fpi->phy_irq != -1)
+ fs_free_irq(dev, fpi->phy_irq);
+ fs_free_irq(dev, fep->interrupt);
+
+ return 0;
+}
+
+static struct net_device_stats *fs_enet_get_stats(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return &fep->stats;
+}
+
+/*************************************************************************/
+
+static void fs_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int fs_get_regs_len(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ return (*fep->ops->get_regs_len)(dev);
+}
+
+static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int r, len;
+
+ len = regs->len;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ r = (*fep->ops->get_regs)(dev, p, &len);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ if (r == 0)
+ regs->version = 0;
+}
+
+static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = mii_ethtool_gset(&fep->mii_if, cmd);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return rc;
+}
+
+static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = mii_ethtool_sset(&fep->mii_if, cmd);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return rc;
+}
+
+static int fs_nway_reset(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return mii_nway_restart(&fep->mii_if);
+}
+
+static u32 fs_get_msglevel(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return fep->msg_enable;
+}
+
+static void fs_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fep->msg_enable = value;
+}
+
+static struct ethtool_ops fs_ethtool_ops = {
+ .get_drvinfo = fs_get_drvinfo,
+ .get_regs_len = fs_get_regs_len,
+ .get_settings = fs_get_settings,
+ .set_settings = fs_set_settings,
+ .nway_reset = fs_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = fs_get_msglevel,
+ .set_msglevel = fs_set_msglevel,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum, /* local! */
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_regs = fs_get_regs,
+};
+
+static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
+ unsigned long flags;
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL);
+ spin_unlock_irqrestore(&fep->lock, flags);
+ return rc;
+}
+
+extern int fs_mii_connect(struct net_device *dev);
+extern void fs_mii_disconnect(struct net_device *dev);
+
+static struct net_device *fs_init_instance(struct device *dev,
+ const struct fs_platform_info *fpi)
+{
+ struct net_device *ndev = NULL;
+ struct fs_enet_private *fep = NULL;
+ int privsize, i, r, err = 0, registered = 0;
+
+ /* guard */
+ if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX)
+ return ERR_PTR(-EINVAL);
+
+ privsize = sizeof(*fep) + (sizeof(struct sk_buff **) *
+ (fpi->rx_ring + fpi->tx_ring));
+
+ ndev = alloc_etherdev(privsize);
+ if (!ndev) {
+ err = -ENOMEM;
+ goto err;
+ }
+ SET_MODULE_OWNER(ndev);
+
+ fep = netdev_priv(ndev);
+ memset(fep, 0, privsize); /* clear everything */
+
+ fep->dev = dev;
+ dev_set_drvdata(dev, ndev);
+ fep->fpi = fpi;
+ if (fpi->init_ioports)
+ fpi->init_ioports();
+
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ if (fs_get_fec_index(fpi->fs_no) >= 0)
+ fep->ops = &fs_fec_ops;
+#endif
+
+#ifdef CONFIG_FS_ENET_HAS_SCC
+ if (fs_get_scc_index(fpi->fs_no) >=0 )
+ fep->ops = &fs_scc_ops;
+#endif
+
+#ifdef CONFIG_FS_ENET_HAS_FCC
+ if (fs_get_fcc_index(fpi->fs_no) >= 0)
+ fep->ops = &fs_fcc_ops;
+#endif
+
+ if (fep->ops == NULL) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s No matching ops found (%d).\n",
+ ndev->name, fpi->fs_no);
+ err = -EINVAL;
+ goto err;
+ }
+
+ r = (*fep->ops->setup_data)(ndev);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s setup_data failed\n",
+ ndev->name);
+ err = r;
+ goto err;
+ }
+
+ /* point rx_skbuff, tx_skbuff */
+ fep->rx_skbuff = (struct sk_buff **)&fep[1];
+ fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring;
+
+ /* init locks */
+ spin_lock_init(&fep->lock);
+ spin_lock_init(&fep->tx_lock);
+
+ /*
+ * Set the Ethernet address.
+ */
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = fpi->macaddr[i];
+
+ r = (*fep->ops->allocate_bd)(ndev);
+
+ if (fep->ring_base == NULL) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r);
+ err = r;
+ goto err;
+ }
+
+ /*
+ * Set receive and transmit descriptor base.
+ */
+ fep->rx_bd_base = fep->ring_base;
+ fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring;
+
+ /* initialize ring size variables */
+ fep->tx_ring = fpi->tx_ring;
+ fep->rx_ring = fpi->rx_ring;
+
+ /*
+ * The FEC Ethernet specific entries in the device structure.
+ */
+ ndev->open = fs_enet_open;
+ ndev->hard_start_xmit = fs_enet_start_xmit;
+ ndev->tx_timeout = fs_timeout;
+ ndev->watchdog_timeo = 2 * HZ;
+ ndev->stop = fs_enet_close;
+ ndev->get_stats = fs_enet_get_stats;
+ ndev->set_multicast_list = fs_set_multicast_list;
+ if (fpi->use_napi) {
+ ndev->poll = fs_enet_rx_napi;
+ ndev->weight = fpi->napi_weight;
+ }
+ ndev->ethtool_ops = &fs_ethtool_ops;
+ ndev->do_ioctl = fs_ioctl;
+
+ init_timer(&fep->phy_timer_list);
+
+ netif_carrier_off(ndev);
+
+ err = register_netdev(ndev);
+ if (err != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s register_netdev failed.\n", ndev->name);
+ goto err;
+ }
+ registered = 1;
+
+ err = fs_mii_connect(ndev);
+ if (err != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s fs_mii_connect failed.\n", ndev->name);
+ goto err;
+ }
+
+ return ndev;
+
+ err:
+ if (ndev != NULL) {
+
+ if (registered)
+ unregister_netdev(ndev);
+
+ if (fep != NULL) {
+ (*fep->ops->free_bd)(ndev);
+ (*fep->ops->cleanup_data)(ndev);
+ }
+
+ free_netdev(ndev);
+ }
+
+ dev_set_drvdata(dev, NULL);
+
+ return ERR_PTR(err);
+}
+
+static int fs_cleanup_instance(struct net_device *ndev)
+{
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+ struct device *dev;
+
+ if (ndev == NULL)
+ return -EINVAL;
+
+ fep = netdev_priv(ndev);
+ if (fep == NULL)
+ return -EINVAL;
+
+ fpi = fep->fpi;
+
+ fs_mii_disconnect(ndev);
+
+ unregister_netdev(ndev);
+
+ dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
+ fep->ring_base, fep->ring_mem_addr);
+
+ /* reset it */
+ (*fep->ops->cleanup_data)(ndev);
+
+ dev = fep->dev;
+ if (dev != NULL) {
+ dev_set_drvdata(dev, NULL);
+ fep->dev = NULL;
+ }
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+/**************************************************************************************/
+
+/* handy pointer to the immap */
+void *fs_enet_immap = NULL;
+
+static int setup_immap(void)
+{
+ phys_addr_t paddr = 0;
+ unsigned long size = 0;
+
+#ifdef CONFIG_CPM1
+ paddr = IMAP_ADDR;
+ size = 0x10000; /* map 64K */
+#endif
+
+#ifdef CONFIG_CPM2
+ paddr = CPM_MAP_ADDR;
+ size = 0x40000; /* map 256 K */
+#endif
+ fs_enet_immap = ioremap(paddr, size);
+ if (fs_enet_immap == NULL)
+ return -EBADF; /* XXX ahem; maybe just BUG_ON? */
+
+ return 0;
+}
+
+static void cleanup_immap(void)
+{
+ if (fs_enet_immap != NULL) {
+ iounmap(fs_enet_immap);
+ fs_enet_immap = NULL;
+ }
+}
+
+/**************************************************************************************/
+
+static int __devinit fs_enet_probe(struct device *dev)
+{
+ struct net_device *ndev;
+
+ /* no fixup - no device */
+ if (dev->platform_data == NULL) {
+ printk(KERN_INFO "fs_enet: "
+ "probe called with no platform data; "
+ "remove unused devices\n");
+ return -ENODEV;
+ }
+
+ ndev = fs_init_instance(dev, dev->platform_data);
+ if (IS_ERR(ndev))
+ return PTR_ERR(ndev);
+ return 0;
+}
+
+static int fs_enet_remove(struct device *dev)
+{
+ return fs_cleanup_instance(dev_get_drvdata(dev));
+}
+
+static struct device_driver fs_enet_fec_driver = {
+ .name = "fsl-cpm-fec",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static struct device_driver fs_enet_scc_driver = {
+ .name = "fsl-cpm-scc",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static struct device_driver fs_enet_fcc_driver = {
+ .name = "fsl-cpm-fcc",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static int __init fs_init(void)
+{
+ int r;
+
+ printk(KERN_INFO
+ "%s", version);
+
+ r = setup_immap();
+ if (r != 0)
+ return r;
+ r = driver_register(&fs_enet_fec_driver);
+ if (r != 0)
+ goto err;
+
+ r = driver_register(&fs_enet_fcc_driver);
+ if (r != 0)
+ goto err;
+
+ r = driver_register(&fs_enet_scc_driver);
+ if (r != 0)
+ goto err;
+
+ return 0;
+err:
+ cleanup_immap();
+ return r;
+
+}
+
+static void __exit fs_cleanup(void)
+{
+ driver_unregister(&fs_enet_fec_driver);
+ driver_unregister(&fs_enet_fcc_driver);
+ driver_unregister(&fs_enet_scc_driver);
+ cleanup_immap();
+}
+
+/**************************************************************************************/
+
+module_init(fs_init);
+module_exit(fs_cleanup);
diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c
new file mode 100644
index 0000000..c677037
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet-mii.c
@@ -0,0 +1,507 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
+ * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+/*
+ * Generic PHY support.
+ * Should work for all PHYs, but link change is detected by polling
+ */
+
+static void generic_timer_callback(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->phy_timer_list.expires = jiffies + HZ / 2;
+
+ add_timer(&fep->phy_timer_list);
+
+ fs_mii_link_status_change_check(dev, 0);
+}
+
+static void generic_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */
+ fep->phy_timer_list.data = (unsigned long)dev;
+ fep->phy_timer_list.function = generic_timer_callback;
+ add_timer(&fep->phy_timer_list);
+}
+
+static void generic_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ del_timer_sync(&fep->phy_timer_list);
+}
+
+/* ------------------------------------------------------------------------- */
+/* The Davicom DM9161 is used on the NETTA board */
+
+/* register definitions */
+
+#define MII_DM9161_ANAR 4 /* Aux. Config Register */
+#define MII_DM9161_ACR 16 /* Aux. Config Register */
+#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */
+#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */
+#define MII_DM9161_INTR 21 /* Interrupt Register */
+#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */
+#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */
+
+static void dm9161_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000);
+ /* Start autonegotiation */
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200);
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ*8);
+}
+
+static void dm9161_ack_int(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR);
+}
+
+static void dm9161_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00);
+}
+
+/**********************************************************************************/
+
+static const struct phy_info phy_info[] = {
+ {
+ .id = 0x00181b88,
+ .name = "DM9161",
+ .startup = dm9161_startup,
+ .ack_int = dm9161_ack_int,
+ .shutdown = dm9161_shutdown,
+ }, {
+ .id = 0,
+ .name = "GENERIC",
+ .startup = generic_startup,
+ .shutdown = generic_shutdown,
+ },
+};
+
+/**********************************************************************************/
+
+static int phy_id_detect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ int i, r, start, end, phytype, physubtype;
+ const struct phy_info *phy;
+ int phy_hwid, phy_id;
+
+ phy_hwid = -1;
+ fep->phy = NULL;
+
+ /* auto-detect? */
+ if (fpi->phy_addr == -1) {
+ start = 1;
+ end = 32;
+ } else { /* direct */
+ start = fpi->phy_addr;
+ end = start + 1;
+ }
+
+ for (phy_id = start; phy_id < end; phy_id++) {
+ /* skip already used phy addresses on this bus */
+ if (bus->usage_map & (1 << phy_id))
+ continue;
+ r = fs_mii_read(dev, phy_id, MII_PHYSID1);
+ if (r == -1 || (phytype = (r & 0xffff)) == 0xffff)
+ continue;
+ r = fs_mii_read(dev, phy_id, MII_PHYSID2);
+ if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff)
+ continue;
+ phy_hwid = (phytype << 16) | physubtype;
+ if (phy_hwid != -1)
+ break;
+ }
+
+ if (phy_hwid == -1) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s No PHY detected! range=0x%02x-0x%02x\n",
+ dev->name, start, end);
+ return -1;
+ }
+
+ for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++)
+ if (phy->id == (phy_hwid >> 4) || phy->id == 0)
+ break;
+
+ if (i >= ARRAY_SIZE(phy_info)) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s PHY id 0x%08x is not supported!\n",
+ dev->name, phy_hwid);
+ return -1;
+ }
+
+ fep->phy = phy;
+
+ /* mark this address as used */
+ bus->usage_map |= (1 << phy_id);
+
+ printk(KERN_INFO DRV_MODULE_NAME
+ ": %s Phy @ 0x%x, type %s (0x%08x)%s\n",
+ dev->name, phy_id, fep->phy->name, phy_hwid,
+ fpi->phy_addr == -1 ? " (auto-detected)" : "");
+
+ return phy_id;
+}
+
+void fs_mii_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->startup)
+ (*fep->phy->startup) (dev);
+}
+
+void fs_mii_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->shutdown)
+ (*fep->phy->shutdown) (dev);
+}
+
+void fs_mii_ack_int(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->ack_int)
+ (*fep->phy->ack_int) (dev);
+}
+
+#define MII_LINK 0x0001
+#define MII_HALF 0x0002
+#define MII_FULL 0x0004
+#define MII_BASE4 0x0008
+#define MII_10M 0x0010
+#define MII_100M 0x0020
+#define MII_1G 0x0040
+#define MII_10G 0x0080
+
+/* return full mii info at one gulp, with a usable form */
+static unsigned int mii_full_status(struct mii_if_info *mii)
+{
+ unsigned int status;
+ int bmsr, adv, lpa, neg;
+ struct fs_enet_private* fep = netdev_priv(mii->dev);
+
+ /* first, a dummy read, needed to latch some MII phys */
+ (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+
+ /* no link */
+ if ((bmsr & BMSR_LSTATUS) == 0)
+ return 0;
+
+ status = MII_LINK;
+
+ /* Lets look what ANEG says if it's supported - otherwize we shall
+ take the right values from the platform info*/
+ if(!mii->force_media) {
+ /* autoneg not completed; don't bother */
+ if ((bmsr & BMSR_ANEGCOMPLETE) == 0)
+ return 0;
+
+ adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE);
+ lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA);
+
+ neg = lpa & adv;
+ } else {
+ neg = fep->fpi->bus_info->lpa;
+ }
+
+ if (neg & LPA_100FULL)
+ status |= MII_FULL | MII_100M;
+ else if (neg & LPA_100BASE4)
+ status |= MII_FULL | MII_BASE4 | MII_100M;
+ else if (neg & LPA_100HALF)
+ status |= MII_HALF | MII_100M;
+ else if (neg & LPA_10FULL)
+ status |= MII_FULL | MII_10M;
+ else
+ status |= MII_HALF | MII_10M;
+
+ return status;
+}
+
+void fs_mii_link_status_change_check(struct net_device *dev, int init_media)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct mii_if_info *mii = &fep->mii_if;
+ unsigned int mii_status;
+ int ok_to_print, link, duplex, speed;
+ unsigned long flags;
+
+ ok_to_print = netif_msg_link(fep);
+
+ mii_status = mii_full_status(mii);
+
+ if (!init_media && mii_status == fep->last_mii_status)
+ return;
+
+ fep->last_mii_status = mii_status;
+
+ link = !!(mii_status & MII_LINK);
+ duplex = !!(mii_status & MII_FULL);
+ speed = (mii_status & MII_100M) ? 100 : 10;
+
+ if (link == 0) {
+ netif_carrier_off(mii->dev);
+ netif_stop_queue(dev);
+ if (!init_media) {
+ spin_lock_irqsave(&fep->lock, flags);
+ (*fep->ops->stop)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+ }
+
+ if (ok_to_print)
+ printk(KERN_INFO "%s: link down\n", mii->dev->name);
+
+ } else {
+
+ mii->full_duplex = duplex;
+
+ netif_carrier_on(mii->dev);
+
+ spin_lock_irqsave(&fep->lock, flags);
+ fep->duplex = duplex;
+ fep->speed = speed;
+ (*fep->ops->restart)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ netif_start_queue(dev);
+
+ if (ok_to_print)
+ printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n",
+ dev->name, speed, duplex ? "full" : "half");
+ }
+}
+
+/**********************************************************************************/
+
+int fs_mii_read(struct net_device *dev, int phy_id, int location)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&bus->mii_lock, flags);
+ ret = (*bus->mii_read)(bus, phy_id, location);
+ spin_unlock_irqrestore(&bus->mii_lock, flags);
+
+ return ret;
+}
+
+void fs_mii_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bus->mii_lock, flags);
+ (*bus->mii_write)(bus, phy_id, location, value);
+ spin_unlock_irqrestore(&bus->mii_lock, flags);
+}
+
+/*****************************************************************************/
+
+/* list of all registered mii buses */
+static LIST_HEAD(fs_mii_bus_list);
+
+static struct fs_enet_mii_bus *lookup_bus(int method, int id)
+{
+ struct list_head *ptr;
+ struct fs_enet_mii_bus *bus;
+
+ list_for_each(ptr, &fs_mii_bus_list) {
+ bus = list_entry(ptr, struct fs_enet_mii_bus, list);
+ if (bus->bus_info->method == method &&
+ bus->bus_info->id == id)
+ return bus;
+ }
+ return NULL;
+}
+
+static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi)
+{
+ struct fs_enet_mii_bus *bus;
+ int ret = 0;
+
+ bus = kmalloc(sizeof(*bus), GFP_KERNEL);
+ if (bus == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ memset(bus, 0, sizeof(*bus));
+ spin_lock_init(&bus->mii_lock);
+ bus->bus_info = bi;
+ bus->refs = 0;
+ bus->usage_map = 0;
+
+ /* perform initialization */
+ switch (bi->method) {
+
+ case fsmii_fixed:
+ ret = fs_mii_fixed_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+
+ case fsmii_bitbang:
+ ret = fs_mii_bitbang_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ case fsmii_fec:
+ ret = fs_mii_fec_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+#endif
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+
+ list_add(&bus->list, &fs_mii_bus_list);
+
+ return bus;
+
+err:
+ if (bus)
+ kfree(bus);
+ return ERR_PTR(ret);
+}
+
+static void destroy_bus(struct fs_enet_mii_bus *bus)
+{
+ /* remove from bus list */
+ list_del(&bus->list);
+
+ /* nothing more needed */
+ kfree(bus);
+}
+
+int fs_mii_connect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ struct fs_enet_mii_bus *bus = NULL;
+
+ /* check method validity */
+ switch (fpi->bus_info->method) {
+ case fsmii_fixed:
+ case fsmii_bitbang:
+ break;
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ case fsmii_fec:
+ break;
+#endif
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Unknown MII bus method (%d)!\n",
+ dev->name, fpi->bus_info->method);
+ return -EINVAL;
+ }
+
+ bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id);
+
+ /* if not found create new bus */
+ if (bus == NULL) {
+ bus = create_bus(fpi->bus_info);
+ if (IS_ERR(bus)) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s MII bus creation failure!\n", dev->name);
+ return PTR_ERR(bus);
+ }
+ }
+
+ bus->refs++;
+
+ fep->mii_bus = bus;
+
+ fep->mii_if.dev = dev;
+ fep->mii_if.phy_id_mask = 0x1f;
+ fep->mii_if.reg_num_mask = 0x1f;
+ fep->mii_if.mdio_read = fs_mii_read;
+ fep->mii_if.mdio_write = fs_mii_write;
+ fep->mii_if.force_media = fpi->bus_info->disable_aneg;
+ fep->mii_if.phy_id = phy_id_detect(dev);
+
+ return 0;
+}
+
+void fs_mii_disconnect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = NULL;
+
+ bus = fep->mii_bus;
+ fep->mii_bus = NULL;
+
+ if (--bus->refs <= 0)
+ destroy_bus(bus);
+}
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
new file mode 100644
index 0000000..1105543
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -0,0 +1,245 @@
+#ifndef FS_ENET_H
+#define FS_ENET_H
+
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/list.h>
+
+#include <linux/fs_enet_pd.h>
+
+#include <asm/dma-mapping.h>
+
+#ifdef CONFIG_CPM1
+#include <asm/commproc.h>
+#endif
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+#endif
+
+/* hw driver ops */
+struct fs_ops {
+ int (*setup_data)(struct net_device *dev);
+ int (*allocate_bd)(struct net_device *dev);
+ void (*free_bd)(struct net_device *dev);
+ void (*cleanup_data)(struct net_device *dev);
+ void (*set_multicast_list)(struct net_device *dev);
+ void (*restart)(struct net_device *dev);
+ void (*stop)(struct net_device *dev);
+ void (*pre_request_irq)(struct net_device *dev, int irq);
+ void (*post_free_irq)(struct net_device *dev, int irq);
+ void (*napi_clear_rx_event)(struct net_device *dev);
+ void (*napi_enable_rx)(struct net_device *dev);
+ void (*napi_disable_rx)(struct net_device *dev);
+ void (*rx_bd_done)(struct net_device *dev);
+ void (*tx_kickstart)(struct net_device *dev);
+ u32 (*get_int_events)(struct net_device *dev);
+ void (*clear_int_events)(struct net_device *dev, u32 int_events);
+ void (*ev_error)(struct net_device *dev, u32 int_events);
+ int (*get_regs)(struct net_device *dev, void *p, int *sizep);
+ int (*get_regs_len)(struct net_device *dev);
+ void (*tx_restart)(struct net_device *dev);
+};
+
+struct phy_info {
+ unsigned int id;
+ const char *name;
+ void (*startup) (struct net_device * dev);
+ void (*shutdown) (struct net_device * dev);
+ void (*ack_int) (struct net_device * dev);
+};
+
+/* The FEC stores dest/src/type, data, and checksum for receive packets.
+ */
+#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */
+#define MIN_MTU 46 /* this is data size */
+#define CRC_LEN 4
+
+#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN)
+#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN)
+
+/* Must be a multiple of 32 (to cover both FEC & FCC) */
+#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE + 31) & ~31)
+/* This is needed so that invalidate_xxx wont invalidate too much */
+#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE)
+
+struct fs_enet_mii_bus {
+ struct list_head list;
+ spinlock_t mii_lock;
+ const struct fs_mii_bus_info *bus_info;
+ int refs;
+ u32 usage_map;
+
+ int (*mii_read)(struct fs_enet_mii_bus *bus,
+ int phy_id, int location);
+
+ void (*mii_write)(struct fs_enet_mii_bus *bus,
+ int phy_id, int location, int value);
+
+ union {
+ struct {
+ unsigned int mii_speed;
+ void *fecp;
+ } fec;
+
+ struct {
+ /* note that the actual port size may */
+ /* be different; cpm(s) handle it OK */
+ u8 mdio_msk;
+ u8 *mdio_dir;
+ u8 *mdio_dat;
+ u8 mdc_msk;
+ u8 *mdc_dir;
+ u8 *mdc_dat;
+ } bitbang;
+
+ struct {
+ u16 lpa;
+ } fixed;
+ };
+};
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus);
+int fs_mii_fixed_init(struct fs_enet_mii_bus *bus);
+int fs_mii_fec_init(struct fs_enet_mii_bus *bus);
+
+struct fs_enet_private {
+ struct device *dev; /* pointer back to the device (must be initialized first) */
+ spinlock_t lock; /* during all ops except TX pckt processing */
+ spinlock_t tx_lock; /* during fs_start_xmit and fs_tx */
+ const struct fs_platform_info *fpi;
+ const struct fs_ops *ops;
+ int rx_ring, tx_ring;
+ dma_addr_t ring_mem_addr;
+ void *ring_base;
+ struct sk_buff **rx_skbuff;
+ struct sk_buff **tx_skbuff;
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *dirty_tx; /* ring entries to be free()ed. */
+ cbd_t *cur_rx;
+ cbd_t *cur_tx;
+ int tx_free;
+ struct net_device_stats stats;
+ struct timer_list phy_timer_list;
+ const struct phy_info *phy;
+ u32 msg_enable;
+ struct mii_if_info mii_if;
+ unsigned int last_mii_status;
+ struct fs_enet_mii_bus *mii_bus;
+ int interrupt;
+
+ int duplex, speed; /* current settings */
+
+ /* event masks */
+ u32 ev_napi_rx; /* mask of NAPI rx events */
+ u32 ev_rx; /* rx event mask */
+ u32 ev_tx; /* tx event mask */
+ u32 ev_err; /* error event mask */
+
+ u16 bd_rx_empty; /* mask of BD rx empty */
+ u16 bd_rx_err; /* mask of BD rx errors */
+
+ union {
+ struct {
+ int idx; /* FEC1 = 0, FEC2 = 1 */
+ void *fecp; /* hw registers */
+ u32 hthi, htlo; /* state for multicast */
+ } fec;
+
+ struct {
+ int idx; /* FCC1-3 = 0-2 */
+ void *fccp; /* hw registers */
+ void *ep; /* parameter ram */
+ void *fcccp; /* hw registers cont. */
+ void *mem; /* FCC DPRAM */
+ u32 gaddrh, gaddrl; /* group address */
+ } fcc;
+
+ struct {
+ int idx; /* FEC1 = 0, FEC2 = 1 */
+ void *sccp; /* hw registers */
+ void *ep; /* parameter ram */
+ u32 hthi, htlo; /* state for multicast */
+ } scc;
+
+ };
+};
+
+/***************************************************************************/
+
+int fs_mii_read(struct net_device *dev, int phy_id, int location);
+void fs_mii_write(struct net_device *dev, int phy_id, int location, int value);
+
+void fs_mii_startup(struct net_device *dev);
+void fs_mii_shutdown(struct net_device *dev);
+void fs_mii_ack_int(struct net_device *dev);
+
+void fs_mii_link_status_change_check(struct net_device *dev, int init_media);
+
+void fs_init_bds(struct net_device *dev);
+void fs_cleanup_bds(struct net_device *dev);
+
+/***************************************************************************/
+
+#define DRV_MODULE_NAME "fs_enet"
+#define PFX DRV_MODULE_NAME ": "
+#define DRV_MODULE_VERSION "1.0"
+#define DRV_MODULE_RELDATE "Aug 8, 2005"
+
+/***************************************************************************/
+
+int fs_enet_platform_init(void);
+void fs_enet_platform_cleanup(void);
+
+/***************************************************************************/
+
+/* buffer descriptor access macros */
+
+/* access macros */
+#if defined(CONFIG_CPM1)
+/* for a a CPM1 __raw_xxx's are sufficient */
+#define __cbd_out32(addr, x) __raw_writel(x, addr)
+#define __cbd_out16(addr, x) __raw_writew(x, addr)
+#define __cbd_in32(addr) __raw_readl(addr)
+#define __cbd_in16(addr) __raw_readw(addr)
+#else
+/* for others play it safe */
+#define __cbd_out32(addr, x) out_be32(addr, x)
+#define __cbd_out16(addr, x) out_be16(addr, x)
+#define __cbd_in32(addr) in_be32(addr)
+#define __cbd_in16(addr) in_be16(addr)
+#endif
+
+/* write */
+#define CBDW_SC(_cbd, _sc) __cbd_out16(&(_cbd)->cbd_sc, (_sc))
+#define CBDW_DATLEN(_cbd, _datlen) __cbd_out16(&(_cbd)->cbd_datlen, (_datlen))
+#define CBDW_BUFADDR(_cbd, _bufaddr) __cbd_out32(&(_cbd)->cbd_bufaddr, (_bufaddr))
+
+/* read */
+#define CBDR_SC(_cbd) __cbd_in16(&(_cbd)->cbd_sc)
+#define CBDR_DATLEN(_cbd) __cbd_in16(&(_cbd)->cbd_datlen)
+#define CBDR_BUFADDR(_cbd) __cbd_in32(&(_cbd)->cbd_bufaddr)
+
+/* set bits */
+#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc))
+
+/* clear bits */
+#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc))
+
+/*******************************************************************/
+
+extern const struct fs_ops fs_fec_ops;
+extern const struct fs_ops fs_fcc_ops;
+extern const struct fs_ops fs_scc_ops;
+
+/*******************************************************************/
+
+/* handy pointer to the immap */
+extern void *fs_enet_immap;
+
+/*******************************************************************/
+
+#endif
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
new file mode 100644
index 0000000..a940b96
--- /dev/null
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -0,0 +1,578 @@
+/*
+ * FCC driver for Motorola MPC82xx (PQ2).
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+/* FCC access macros */
+
+#define __fcc_out32(addr, x) out_be32((unsigned *)addr, x)
+#define __fcc_out16(addr, x) out_be16((unsigned short *)addr, x)
+#define __fcc_out8(addr, x) out_8((unsigned char *)addr, x)
+#define __fcc_in32(addr) in_be32((unsigned *)addr)
+#define __fcc_in16(addr) in_be16((unsigned short *)addr)
+#define __fcc_in8(addr) in_8((unsigned char *)addr)
+
+/* parameter space */
+
+/* write, read, set bits, clear bits */
+#define W32(_p, _m, _v) __fcc_out32(&(_p)->_m, (_v))
+#define R32(_p, _m) __fcc_in32(&(_p)->_m)
+#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v))
+#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v))
+
+#define W16(_p, _m, _v) __fcc_out16(&(_p)->_m, (_v))
+#define R16(_p, _m) __fcc_in16(&(_p)->_m)
+#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v))
+#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v))
+
+#define W8(_p, _m, _v) __fcc_out8(&(_p)->_m, (_v))
+#define R8(_p, _m) __fcc_in8(&(_p)->_m)
+#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v))
+#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v))
+
+/*************************************************/
+
+#define FCC_MAX_MULTICAST_ADDRS 64
+
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
+#define mk_mii_end 0
+
+#define MAX_CR_CMD_LOOPS 10000
+
+static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 mcn, u32 op)
+{
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ cpm2_map_t *immap = fs_enet_immap;
+ cpm_cpm2_t *cpmp = &immap->im_cpm;
+ u32 v;
+ int i;
+
+ /* Currently I don't know what feature call will look like. But
+ I guess there'd be something like do_cpm_cmd() which will require page & sblock */
+ v = mk_cr_cmd(fpi->cp_page, fpi->cp_block, mcn, op);
+ W32(cpmp, cp_cpcr, v | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
+ break;
+
+ if (i >= MAX_CR_CMD_LOOPS) {
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq(pdev, 0);
+
+ /* Attach the memory for the FCC Parameter RAM */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram");
+ fep->fcc.ep = (void *)r->start;
+
+ if (fep->fcc.ep == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs");
+ fep->fcc.fccp = (void *)r->start;
+
+ if (fep->fcc.fccp == NULL)
+ return -EINVAL;
+
+ fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c;
+
+ if (fep->fcc.fcccp == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB)
+#define FCC_RX_EVENT (FCC_ENET_RXF)
+#define FCC_TX_EVENT (FCC_ENET_TXB)
+#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->fcc.idx = fs_get_fcc_index(fpi->fs_no);
+ if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */
+ return -EINVAL;
+
+ fep->fcc.mem = (void *)fpi->mem_offset;
+
+ if (do_pd_setup(fep) != 0)
+ return -EINVAL;
+
+ fep->ev_napi_rx = FCC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = FCC_RX_EVENT;
+ fep->ev_tx = FCC_TX_EVENT;
+ fep->ev_err = FCC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_base = dma_alloc_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), &fep->ring_mem_addr,
+ GFP_KERNEL);
+ if (fep->ring_base == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ if (fep->ring_base)
+ dma_free_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
+ fep->ring_base, fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ S32(fccp, fcc_fpsmr, FCC_PSMR_PRO);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_enet_t *ep = fep->fcc.ep;
+
+ W32(ep, fen_gaddrh, 0);
+ W32(ep, fen_gaddrl, 0);
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 *mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_enet_t *ep = fep->fcc.ep;
+ u16 taddrh, taddrm, taddrl;
+
+ taddrh = ((u16)mac[5] << 8) | mac[4];
+ taddrm = ((u16)mac[3] << 8) | mac[2];
+ taddrl = ((u16)mac[1] << 8) | mac[0];
+
+ W16(ep, fen_taddrh, taddrh);
+ W16(ep, fen_taddrm, taddrm);
+ W16(ep, fen_taddrl, taddrl);
+ fcc_cr_cmd(fep, 0x0C, CPM_CR_SET_GADDR);
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+ fcc_enet_t *ep = fep->fcc.ep;
+
+ /* clear promiscuous always */
+ C32(fccp, fcc_fpsmr, FCC_PSMR_PRO);
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > FCC_MAX_MULTICAST_ADDRS) {
+
+ W32(ep, fen_gaddrh, 0xffffffff);
+ W32(ep, fen_gaddrl, 0xffffffff);
+ }
+
+ /* read back */
+ fep->fcc.gaddrh = R32(ep, fen_gaddrh);
+ fep->fcc.gaddrl = R32(ep, fen_gaddrl);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+static void restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ fcc_t *fccp = fep->fcc.fccp;
+ fcc_c_t *fcccp = fep->fcc.fcccp;
+ fcc_enet_t *ep = fep->fcc.ep;
+ dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
+ u16 paddrh, paddrm, paddrl;
+ u16 mem_addr;
+ const unsigned char *mac;
+ int i;
+
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+
+ /* clear everything (slow & steady does it) */
+ for (i = 0; i < sizeof(*ep); i++)
+ __fcc_out8((char *)ep + i, 0);
+
+ /* get physical address */
+ rx_bd_base_phys = fep->ring_mem_addr;
+ tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring;
+
+ /* point to bds */
+ W32(ep, fen_genfcc.fcc_rbase, rx_bd_base_phys);
+ W32(ep, fen_genfcc.fcc_tbase, tx_bd_base_phys);
+
+ /* Set maximum bytes per receive buffer.
+ * It must be a multiple of 32.
+ */
+ W16(ep, fen_genfcc.fcc_mrblr, PKT_MAXBLR_SIZE);
+
+ W32(ep, fen_genfcc.fcc_rstate, (CPMFCR_GBL | CPMFCR_EB) << 24);
+ W32(ep, fen_genfcc.fcc_tstate, (CPMFCR_GBL | CPMFCR_EB) << 24);
+
+ /* Allocate space in the reserved FCC area of DPRAM for the
+ * internal buffers. No one uses this space (yet), so we
+ * can do this. Later, we will add resource management for
+ * this area.
+ */
+
+ mem_addr = (u32) fep->fcc.mem; /* de-fixup dpram offset */
+
+ W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff));
+ W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff));
+ W16(ep, fen_padptr, mem_addr + 64);
+
+ /* fill with special symbol... */
+ memset(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32);
+
+ W32(ep, fen_genfcc.fcc_rbptr, 0);
+ W32(ep, fen_genfcc.fcc_tbptr, 0);
+ W32(ep, fen_genfcc.fcc_rcrc, 0);
+ W32(ep, fen_genfcc.fcc_tcrc, 0);
+ W16(ep, fen_genfcc.fcc_res1, 0);
+ W32(ep, fen_genfcc.fcc_res2, 0);
+
+ /* no CAM */
+ W32(ep, fen_camptr, 0);
+
+ /* Set CRC preset and mask */
+ W32(ep, fen_cmask, 0xdebb20e3);
+ W32(ep, fen_cpres, 0xffffffff);
+
+ W32(ep, fen_crcec, 0); /* CRC Error counter */
+ W32(ep, fen_alec, 0); /* alignment error counter */
+ W32(ep, fen_disfc, 0); /* discard frame counter */
+ W16(ep, fen_retlim, 15); /* Retry limit threshold */
+ W16(ep, fen_pper, 0); /* Normal persistence */
+
+ /* set group address */
+ W32(ep, fen_gaddrh, fep->fcc.gaddrh);
+ W32(ep, fen_gaddrl, fep->fcc.gaddrh);
+
+ /* Clear hash filter tables */
+ W32(ep, fen_iaddrh, 0);
+ W32(ep, fen_iaddrl, 0);
+
+ /* Clear the Out-of-sequence TxBD */
+ W16(ep, fen_tfcstat, 0);
+ W16(ep, fen_tfclen, 0);
+ W32(ep, fen_tfcptr, 0);
+
+ W16(ep, fen_mflr, PKT_MAXBUF_SIZE); /* maximum frame length register */
+ W16(ep, fen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */
+
+ /* set address */
+ mac = dev->dev_addr;
+ paddrh = ((u16)mac[5] << 8) | mac[4];
+ paddrm = ((u16)mac[3] << 8) | mac[2];
+ paddrl = ((u16)mac[1] << 8) | mac[0];
+
+ W16(ep, fen_paddrh, paddrh);
+ W16(ep, fen_paddrm, paddrm);
+ W16(ep, fen_paddrl, paddrl);
+
+ W16(ep, fen_taddrh, 0);
+ W16(ep, fen_taddrm, 0);
+ W16(ep, fen_taddrl, 0);
+
+ W16(ep, fen_maxd1, 1520); /* maximum DMA1 length */
+ W16(ep, fen_maxd2, 1520); /* maximum DMA2 length */
+
+ /* Clear stat counters, in case we ever enable RMON */
+ W32(ep, fen_octc, 0);
+ W32(ep, fen_colc, 0);
+ W32(ep, fen_broc, 0);
+ W32(ep, fen_mulc, 0);
+ W32(ep, fen_uspc, 0);
+ W32(ep, fen_frgc, 0);
+ W32(ep, fen_ospc, 0);
+ W32(ep, fen_jbrc, 0);
+ W32(ep, fen_p64c, 0);
+ W32(ep, fen_p65c, 0);
+ W32(ep, fen_p128c, 0);
+ W32(ep, fen_p256c, 0);
+ W32(ep, fen_p512c, 0);
+ W32(ep, fen_p1024c, 0);
+
+ W16(ep, fen_rfthr, 0); /* Suggested by manual */
+ W16(ep, fen_rfcnt, 0);
+ W16(ep, fen_cftype, 0);
+
+ fs_init_bds(dev);
+
+ /* adjust to speed (for RMII mode) */
+ if (fpi->use_rmii) {
+ if (fep->speed == 100)
+ C8(fcccp, fcc_gfemr, 0x20);
+ else
+ S8(fcccp, fcc_gfemr, 0x20);
+ }
+
+ fcc_cr_cmd(fep, 0x0c, CPM_CR_INIT_TRX);
+
+ /* clear events */
+ W16(fccp, fcc_fcce, 0xffff);
+
+ /* Enable interrupts we wish to service */
+ W16(fccp, fcc_fccm, FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
+
+ /* Set GFMR to enable Ethernet operating mode */
+ W32(fccp, fcc_gfmr, FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
+
+ /* set sync/delimiters */
+ W16(fccp, fcc_fdsr, 0xd555);
+
+ W32(fccp, fcc_fpsmr, FCC_PSMR_ENCRC);
+
+ if (fpi->use_rmii)
+ S32(fccp, fcc_fpsmr, FCC_PSMR_RMII);
+
+ /* adjust to duplex mode */
+ if (fep->duplex)
+ S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+ else
+ C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+
+ S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ /* stop ethernet */
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+
+ /* clear events */
+ W16(fccp, fcc_fcce, 0xffff);
+
+ /* clear interrupt mask */
+ W16(fccp, fcc_fccm, 0);
+
+ fs_cleanup_bds(dev);
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ W16(fccp, fcc_fcce, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ S16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ C16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ return (u32)R16(fccp, fcc_fcce);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ W16(fccp, fcc_fcce, int_events & 0xffff);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FS_ENET ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->fcc.fccp, sizeof(fcc_t));
+ p = (char *)p + sizeof(fcc_t);
+
+ memcpy_fromio(p, fep->fcc.fcccp, sizeof(fcc_c_t));
+ p = (char *)p + sizeof(fcc_c_t);
+
+ memcpy_fromio(p, fep->fcc.ep, sizeof(fcc_enet_t));
+
+ return 0;
+}
+
+int get_regs_len(struct net_device *dev)
+{
+ return sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t);
+}
+
+/* Some transmit errors cause the transmitter to shut
+ * down. We now issue a restart transmit. Since the
+ * errors close the BD and update the pointers, the restart
+ * _should_ pick up without having to reset any of our
+ * pointers either. Also, To workaround 8260 device erratum
+ * CPM37, we must disable and then re-enable the transmitter
+ * following a Late Collision, Underrun, or Retry Limit error.
+ */
+void tx_restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENT);
+ udelay(10);
+ S32(fccp, fcc_gfmr, FCC_GFMR_ENT);
+
+ fcc_cr_cmd(fep, 0x0C, CPM_CR_RESTART_TX);
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_fcc_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
new file mode 100644
index 0000000..5ef4e84
--- /dev/null
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -0,0 +1,653 @@
+/*
+ * Freescale Ethernet controllers
+ *
+ * Copyright (c) 2005 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#endif
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+#if defined(CONFIG_CPM1)
+/* for a CPM1 __raw_xxx's are sufficient */
+#define __fs_out32(addr, x) __raw_writel(x, addr)
+#define __fs_out16(addr, x) __raw_writew(x, addr)
+#define __fs_in32(addr) __raw_readl(addr)
+#define __fs_in16(addr) __raw_readw(addr)
+#else
+/* for others play it safe */
+#define __fs_out32(addr, x) out_be32(addr, x)
+#define __fs_out16(addr, x) out_be16(addr, x)
+#define __fs_in32(addr) in_be32(addr)
+#define __fs_in16(addr) in_be16(addr)
+#endif
+
+/* write */
+#define FW(_fecp, _reg, _v) __fs_out32(&(_fecp)->fec_ ## _reg, (_v))
+
+/* read */
+#define FR(_fecp, _reg) __fs_in32(&(_fecp)->fec_ ## _reg)
+
+/* set bits */
+#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v))
+
+/* clear bits */
+#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v))
+
+
+/* CRC polynomium used by the FEC for the multicast group filtering */
+#define FEC_CRC_POLY 0x04C11DB7
+
+#define FEC_MAX_MULTICAST_ADDRS 64
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */
+#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */
+#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */
+#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */
+#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */
+#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */
+#define FEC_ENET_RXF 0x02000000U /* Full frame received */
+#define FEC_ENET_RXB 0x01000000U /* A buffer was received */
+#define FEC_ENET_MII 0x00800000U /* MII interrupt */
+#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */
+
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+
+/* Make MII read/write commands for the FEC.
+*/
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
+#define mk_mii_end 0
+
+#define FEC_MII_LOOPS 10000
+
+/*
+ * Delay to wait for FEC reset command to complete (in us)
+ */
+#define FEC_RESET_DELAY 50
+
+static int whack_reset(fec_t * fecp)
+{
+ int i;
+
+ FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
+ for (i = 0; i < FEC_RESET_DELAY; i++) {
+ if ((FR(fecp, ecntrl) & FEC_ECNTRL_RESET) == 0)
+ return 0; /* OK */
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq_byname(pdev,"interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ fep->fec.fecp =(void*)r->start;
+
+ if(fep->fec.fecp == NULL)
+ return -EINVAL;
+
+ return 0;
+
+}
+
+#define FEC_NAPI_RX_EVENT_MSK (FEC_ENET_RXF | FEC_ENET_RXB)
+#define FEC_RX_EVENT (FEC_ENET_RXF)
+#define FEC_TX_EVENT (FEC_ENET_TXF)
+#define FEC_ERR_EVENT_MSK (FEC_ENET_HBERR | FEC_ENET_BABR | \
+ FEC_ENET_BABT | FEC_ENET_EBERR)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (do_pd_setup(fep) != 0)
+ return -EINVAL;
+
+ fep->fec.hthi = 0;
+ fep->fec.htlo = 0;
+
+ fep->ev_napi_rx = FEC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = FEC_RX_EVENT;
+ fep->ev_tx = FEC_TX_EVENT;
+ fep->ev_err = FEC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_base = dma_alloc_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), &fep->ring_mem_addr,
+ GFP_KERNEL);
+ if (fep->ring_base == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ if(fep->ring_base)
+ dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring)
+ * sizeof(cbd_t),
+ fep->ring_base,
+ fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FS(fecp, r_cntrl, FEC_RCNTRL_PROM);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->fec.hthi = 0;
+ fep->fec.htlo = 0;
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 *mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ int temp, hash_index, i, j;
+ u32 crc, csrVal;
+ u8 byte, msb;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ byte = mac[i];
+ for (j = 0; j < 8; j++) {
+ msb = crc >> 31;
+ crc <<= 1;
+ if (msb ^ (byte & 0x1))
+ crc ^= FEC_CRC_POLY;
+ byte >>= 1;
+ }
+ }
+
+ temp = (crc & 0x3f) >> 1;
+ hash_index = ((temp & 0x01) << 4) |
+ ((temp & 0x02) << 2) |
+ ((temp & 0x04)) |
+ ((temp & 0x08) >> 2) |
+ ((temp & 0x10) >> 4);
+ csrVal = 1 << hash_index;
+ if (crc & 1)
+ fep->fec.hthi |= csrVal;
+ else
+ fep->fec.htlo |= csrVal;
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > FEC_MAX_MULTICAST_ADDRS) {
+ fep->fec.hthi = 0xffffffffU;
+ fep->fec.htlo = 0xffffffffU;
+ }
+
+ FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
+ FW(fecp, hash_table_high, fep->fec.hthi);
+ FW(fecp, hash_table_low, fep->fec.htlo);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+static void restart(struct net_device *dev)
+{
+#ifdef CONFIG_DUET
+ immap_t *immap = fs_enet_immap;
+ u32 cptr;
+#endif
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+ const struct fs_platform_info *fpi = fep->fpi;
+ dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
+ int r;
+ u32 addrhi, addrlo;
+
+ r = whack_reset(fep->fec.fecp);
+ if (r != 0)
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s FEC Reset FAILED!\n", dev->name);
+
+ /*
+ * Set station address.
+ */
+ addrhi = ((u32) dev->dev_addr[0] << 24) |
+ ((u32) dev->dev_addr[1] << 16) |
+ ((u32) dev->dev_addr[2] << 8) |
+ (u32) dev->dev_addr[3];
+ addrlo = ((u32) dev->dev_addr[4] << 24) |
+ ((u32) dev->dev_addr[5] << 16);
+ FW(fecp, addr_low, addrhi);
+ FW(fecp, addr_high, addrlo);
+
+ /*
+ * Reset all multicast.
+ */
+ FW(fecp, hash_table_high, fep->fec.hthi);
+ FW(fecp, hash_table_low, fep->fec.htlo);
+
+ /*
+ * Set maximum receive buffer size.
+ */
+ FW(fecp, r_buff_size, PKT_MAXBLR_SIZE);
+ FW(fecp, r_hash, PKT_MAXBUF_SIZE);
+
+ /* get physical address */
+ rx_bd_base_phys = fep->ring_mem_addr;
+ tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring;
+
+ /*
+ * Set receive and transmit descriptor base.
+ */
+ FW(fecp, r_des_start, rx_bd_base_phys);
+ FW(fecp, x_des_start, tx_bd_base_phys);
+
+ fs_init_bds(dev);
+
+ /*
+ * Enable big endian and don't care about SDMA FC.
+ */
+ FW(fecp, fun_code, 0x78000000);
+
+ /*
+ * Set MII speed.
+ */
+ FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed);
+
+ /*
+ * Clear any outstanding interrupt.
+ */
+ FW(fecp, ievent, 0xffc0);
+ FW(fecp, ivec, (fep->interrupt / 2) << 29);
+
+
+ /*
+ * adjust to speed (only for DUET & RMII)
+ */
+#ifdef CONFIG_DUET
+ if (fpi->use_rmii) {
+ cptr = in_be32(&immap->im_cpm.cp_cptr);
+ switch (fs_get_fec_index(fpi->fs_no)) {
+ case 0:
+ cptr |= 0x100;
+ if (fep->speed == 10)
+ cptr |= 0x0000010;
+ else if (fep->speed == 100)
+ cptr &= ~0x0000010;
+ break;
+ case 1:
+ cptr |= 0x80;
+ if (fep->speed == 10)
+ cptr |= 0x0000008;
+ else if (fep->speed == 100)
+ cptr &= ~0x0000008;
+ break;
+ default:
+ BUG(); /* should never happen */
+ break;
+ }
+ out_be32(&immap->im_cpm.cp_cptr, cptr);
+ }
+#endif
+
+ FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ /*
+ * adjust to duplex mode
+ */
+ if (fep->duplex) {
+ FC(fecp, r_cntrl, FEC_RCNTRL_DRT);
+ FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
+ } else {
+ FS(fecp, r_cntrl, FEC_RCNTRL_DRT);
+ FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
+ }
+
+ /*
+ * Enable interrupts we wish to service.
+ */
+ FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB);
+
+ /*
+ * And last, enable the transmit and receive processing.
+ */
+ FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, r_des_active, 0x01000000);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int i;
+
+ if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0)
+ return; /* already down */
+
+ FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */
+ for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) &&
+ i < FEC_RESET_DELAY; i++)
+ udelay(1);
+
+ if (i == FEC_RESET_DELAY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FEC timeout on graceful transmit stop\n",
+ dev->name);
+ /*
+ * Disable FEC. Let only MII interrupts.
+ */
+ FW(fecp, imask, 0);
+ FC(fecp, ecntrl, FEC_ECNTRL_ETHER_EN);
+
+ fs_cleanup_bds(dev);
+
+ /* shut down FEC1? that's where the mii bus is */
+ if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) {
+ FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, ievent, FEC_ENET_MII);
+ FW(fecp, mii_speed, bus->fec.mii_speed);
+ }
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ immap_t *immap = fs_enet_immap;
+ u32 siel;
+
+ /* SIU interrupt */
+ if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
+
+ siel = in_be32(&immap->im_siu_conf.sc_siel);
+ if ((irq & 1) == 0)
+ siel |= (0x80000000 >> irq);
+ else
+ siel &= ~(0x80000000 >> (irq & ~1));
+ out_be32(&immap->im_siu_conf.sc_siel, siel);
+ }
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, ievent, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FS(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FC(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, r_des_active, 0x01000000);
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, x_des_active, 0x01000000);
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ return FR(fecp, ievent) & FR(fecp, imask);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, ievent, int_events);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FEC ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(fec_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->fec.fecp, sizeof(fec_t));
+
+ return 0;
+}
+
+int get_regs_len(struct net_device *dev)
+{
+ return sizeof(fec_t);
+}
+
+void tx_restart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_fec_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
+
+/***********************************************************************/
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ fec_t *fecp = bus->fec.fecp;
+ int i, ret = -1;
+
+ if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
+ BUG();
+
+ /* Add PHY address to register command. */
+ FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location));
+
+ for (i = 0; i < FEC_MII_LOOPS; i++)
+ if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
+ break;
+
+ if (i < FEC_MII_LOOPS) {
+ FW(fecp, ievent, FEC_ENET_MII);
+ ret = FR(fecp, mii_data) & 0xffff;
+ }
+
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value)
+{
+ fec_t *fecp = bus->fec.fecp;
+ int i;
+
+ /* this must never happen */
+ if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
+ BUG();
+
+ /* Add PHY address to register command. */
+ FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value));
+
+ for (i = 0; i < FEC_MII_LOOPS; i++)
+ if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
+ break;
+
+ if (i < FEC_MII_LOOPS)
+ FW(fecp, ievent, FEC_ENET_MII);
+}
+
+int fs_mii_fec_init(struct fs_enet_mii_bus *bus)
+{
+ bd_t *bd = (bd_t *)__res;
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ fec_t *fecp;
+
+ if (bi->id != 0)
+ return -1;
+
+ bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec;
+ bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2)
+ & 0x3F) << 1;
+
+ fecp = bus->fec.fecp;
+
+ FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, ievent, FEC_ENET_MII);
+ FW(fecp, mii_speed, bus->fec.mii_speed);
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
new file mode 100644
index 0000000..d8c6e9c
--- /dev/null
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -0,0 +1,524 @@
+/*
+ * Ethernet on Serial Communications Controller (SCC) driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#endif
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+#if defined(CONFIG_CPM1)
+/* for a 8xx __raw_xxx's are sufficient */
+#define __fs_out32(addr, x) __raw_writel(x, addr)
+#define __fs_out16(addr, x) __raw_writew(x, addr)
+#define __fs_out8(addr, x) __raw_writeb(x, addr)
+#define __fs_in32(addr) __raw_readl(addr)
+#define __fs_in16(addr) __raw_readw(addr)
+#define __fs_in8(addr) __raw_readb(addr)
+#else
+/* for others play it safe */
+#define __fs_out32(addr, x) out_be32(addr, x)
+#define __fs_out16(addr, x) out_be16(addr, x)
+#define __fs_in32(addr) in_be32(addr)
+#define __fs_in16(addr) in_be16(addr)
+#endif
+
+/* write, read, set bits, clear bits */
+#define W32(_p, _m, _v) __fs_out32(&(_p)->_m, (_v))
+#define R32(_p, _m) __fs_in32(&(_p)->_m)
+#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v))
+#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v))
+
+#define W16(_p, _m, _v) __fs_out16(&(_p)->_m, (_v))
+#define R16(_p, _m) __fs_in16(&(_p)->_m)
+#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v))
+#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v))
+
+#define W8(_p, _m, _v) __fs_out8(&(_p)->_m, (_v))
+#define R8(_p, _m) __fs_in8(&(_p)->_m)
+#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v))
+#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v))
+
+#define SCC_MAX_MULTICAST_ADDRS 64
+
+/*
+ * Delay to wait for SCC reset command to complete (in us)
+ */
+#define SCC_RESET_DELAY 50
+#define MAX_CR_CMD_LOOPS 10000
+
+static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
+{
+ cpm8xx_t *cpmp = &((immap_t *)fs_enet_immap)->im_cpm;
+ u32 v, ch;
+ int i = 0;
+
+ ch = fep->scc.idx << 2;
+ v = mk_cr_cmd(ch, op);
+ W16(cpmp, cp_cpcr, v | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
+ break;
+
+ if (i >= MAX_CR_CMD_LOOPS) {
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return 1;
+ }
+ return 0;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq_byname(pdev, "interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ fep->scc.sccp = (void *)r->start;
+
+ if (fep->scc.sccp == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
+ fep->scc.ep = (void *)r->start;
+
+ if (fep->scc.ep == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define SCC_NAPI_RX_EVENT_MSK (SCCE_ENET_RXF | SCCE_ENET_RXB)
+#define SCC_RX_EVENT (SCCE_ENET_RXF)
+#define SCC_TX_EVENT (SCCE_ENET_TXB)
+#define SCC_ERR_EVENT_MSK (SCCE_ENET_TXE | SCCE_ENET_BSY)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->scc.idx = fs_get_scc_index(fpi->fs_no);
+ if ((unsigned int)fep->fcc.idx > 4) /* max 4 SCCs */
+ return -EINVAL;
+
+ do_pd_setup(fep);
+
+ fep->scc.hthi = 0;
+ fep->scc.htlo = 0;
+
+ fep->ev_napi_rx = SCC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = SCC_RX_EVENT;
+ fep->ev_tx = SCC_TX_EVENT;
+ fep->ev_err = SCC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_mem_addr = cpm_dpalloc((fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), 8);
+ if (IS_DPERR(fep->ring_mem_addr))
+ return -ENOMEM;
+
+ fep->ring_base = cpm_dpram_addr(fep->ring_mem_addr);
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->ring_base)
+ cpm_dpfree(fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ S16(sccp, scc_psmr, SCC_PSMR_PRO);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_enet_t *ep = fep->scc.ep;
+
+ W16(ep, sen_gaddr1, 0);
+ W16(ep, sen_gaddr2, 0);
+ W16(ep, sen_gaddr3, 0);
+ W16(ep, sen_gaddr4, 0);
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 * mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_enet_t *ep = fep->scc.ep;
+ u16 taddrh, taddrm, taddrl;
+
+ taddrh = ((u16) mac[5] << 8) | mac[4];
+ taddrm = ((u16) mac[3] << 8) | mac[2];
+ taddrl = ((u16) mac[1] << 8) | mac[0];
+
+ W16(ep, sen_taddrh, taddrh);
+ W16(ep, sen_taddrm, taddrm);
+ W16(ep, sen_taddrl, taddrl);
+ scc_cr_cmd(fep, CPM_CR_SET_GADDR);
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ scc_enet_t *ep = fep->scc.ep;
+
+ /* clear promiscuous always */
+ C16(sccp, scc_psmr, SCC_PSMR_PRO);
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > SCC_MAX_MULTICAST_ADDRS) {
+
+ W16(ep, sen_gaddr1, 0xffff);
+ W16(ep, sen_gaddr2, 0xffff);
+ W16(ep, sen_gaddr3, 0xffff);
+ W16(ep, sen_gaddr4, 0xffff);
+ }
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+/*
+ * This function is called to start or restart the FEC during a link
+ * change. This only happens when switching between half and full
+ * duplex.
+ */
+static void restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ scc_enet_t *ep = fep->scc.ep;
+ const struct fs_platform_info *fpi = fep->fpi;
+ u16 paddrh, paddrm, paddrl;
+ const unsigned char *mac;
+ int i;
+
+ C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* clear everything (slow & steady does it) */
+ for (i = 0; i < sizeof(*ep); i++)
+ __fs_out8((char *)ep + i, 0);
+
+ /* point to bds */
+ W16(ep, sen_genscc.scc_rbase, fep->ring_mem_addr);
+ W16(ep, sen_genscc.scc_tbase,
+ fep->ring_mem_addr + sizeof(cbd_t) * fpi->rx_ring);
+
+ /* Initialize function code registers for big-endian.
+ */
+ W8(ep, sen_genscc.scc_rfcr, SCC_EB);
+ W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+
+ /* Set maximum bytes per receive buffer.
+ * This appears to be an Ethernet frame size, not the buffer
+ * fragment size. It must be a multiple of four.
+ */
+ W16(ep, sen_genscc.scc_mrblr, 0x5f0);
+
+ /* Set CRC preset and mask.
+ */
+ W32(ep, sen_cpres, 0xffffffff);
+ W32(ep, sen_cmask, 0xdebb20e3);
+
+ W32(ep, sen_crcec, 0); /* CRC Error counter */
+ W32(ep, sen_alec, 0); /* alignment error counter */
+ W32(ep, sen_disfc, 0); /* discard frame counter */
+
+ W16(ep, sen_pads, 0x8888); /* Tx short frame pad character */
+ W16(ep, sen_retlim, 15); /* Retry limit threshold */
+
+ W16(ep, sen_maxflr, 0x5ee); /* maximum frame length register */
+
+ W16(ep, sen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */
+
+ W16(ep, sen_maxd1, 0x000005f0); /* maximum DMA1 length */
+ W16(ep, sen_maxd2, 0x000005f0); /* maximum DMA2 length */
+
+ /* Clear hash tables.
+ */
+ W16(ep, sen_gaddr1, 0);
+ W16(ep, sen_gaddr2, 0);
+ W16(ep, sen_gaddr3, 0);
+ W16(ep, sen_gaddr4, 0);
+ W16(ep, sen_iaddr1, 0);
+ W16(ep, sen_iaddr2, 0);
+ W16(ep, sen_iaddr3, 0);
+ W16(ep, sen_iaddr4, 0);
+
+ /* set address
+ */
+ mac = dev->dev_addr;
+ paddrh = ((u16) mac[5] << 8) | mac[4];
+ paddrm = ((u16) mac[3] << 8) | mac[2];
+ paddrl = ((u16) mac[1] << 8) | mac[0];
+
+ W16(ep, sen_paddrh, paddrh);
+ W16(ep, sen_paddrm, paddrm);
+ W16(ep, sen_paddrl, paddrl);
+
+ W16(ep, sen_pper, 0);
+ W16(ep, sen_taddrl, 0);
+ W16(ep, sen_taddrm, 0);
+ W16(ep, sen_taddrh, 0);
+
+ fs_init_bds(dev);
+
+ scc_cr_cmd(fep, CPM_CR_INIT_TRX);
+
+ W16(sccp, scc_scce, 0xffff);
+
+ /* Enable interrupts we wish to service.
+ */
+ W16(sccp, scc_sccm, SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
+
+ /* Set GSMR_H to enable all normal operating modes.
+ * Set GSMR_L to enable Ethernet to MC68160.
+ */
+ W32(sccp, scc_gsmrh, 0);
+ W32(sccp, scc_gsmrl,
+ SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_MODE_ENET);
+
+ /* Set sync/delimiters.
+ */
+ W16(sccp, scc_dsr, 0xd555);
+
+ /* Set processing mode. Use Ethernet CRC, catch broadcast, and
+ * start frame search 22 bit times after RENA.
+ */
+ W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
+
+ /* Set full duplex mode if needed */
+ if (fep->duplex)
+ S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);
+
+ S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ int i;
+
+ for (i = 0; (R16(sccp, scc_sccm) == 0) && i < SCC_RESET_DELAY; i++)
+ udelay(1);
+
+ if (i == SCC_RESET_DELAY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s SCC timeout on graceful transmit stop\n",
+ dev->name);
+
+ W16(sccp, scc_sccm, 0);
+ C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ fs_cleanup_bds(dev);
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ immap_t *immap = fs_enet_immap;
+ u32 siel;
+
+ /* SIU interrupt */
+ if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
+
+ siel = in_be32(&immap->im_siu_conf.sc_siel);
+ if ((irq & 1) == 0)
+ siel |= (0x80000000 >> irq);
+ else
+ siel &= ~(0x80000000 >> (irq & ~1));
+ out_be32(&immap->im_siu_conf.sc_siel, siel);
+ }
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ W16(sccp, scc_scce, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ S16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ C16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ return (u32) R16(sccp, scc_scce);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ W16(sccp, scc_scce, int_events & 0xffff);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s SCC ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+static int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(scc_t) + sizeof(scc_enet_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->scc.sccp, sizeof(scc_t));
+ p = (char *)p + sizeof(scc_t);
+
+ memcpy_fromio(p, fep->scc.ep, sizeof(scc_enet_t));
+
+ return 0;
+}
+
+static int get_regs_len(struct net_device *dev)
+{
+ return sizeof(scc_t) + sizeof(scc_enet_t);
+}
+
+static void tx_restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ scc_cr_cmd(fep, CPM_CR_RESTART_TX);
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_scc_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
new file mode 100644
index 0000000..24a5e2e
--- /dev/null
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -0,0 +1,405 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+#ifdef CONFIG_8xx
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ immap_t *im = (immap_t *)fs_enet_immap;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &im->im_ioport.iop_padir;
+ dat = &im->im_ioport.iop_padat;
+ ppar = &im->im_ioport.iop_papar;
+ break;
+
+ case fsiop_portb:
+ dir = &im->im_cpm.cp_pbdir;
+ dat = &im->im_cpm.cp_pbdat;
+ ppar = &im->im_cpm.cp_pbpar;
+ break;
+
+ case fsiop_portc:
+ dir = &im->im_ioport.iop_pcdir;
+ dat = &im->im_ioport.iop_pcdat;
+ ppar = &im->im_ioport.iop_pcpar;
+ break;
+
+ case fsiop_portd:
+ dir = &im->im_ioport.iop_pddir;
+ dat = &im->im_ioport.iop_pddat;
+ ppar = &im->im_ioport.iop_pdpar;
+ break;
+
+ case fsiop_porte:
+ dir = &im->im_cpm.cp_pedir;
+ dat = &im->im_cpm.cp_pedat;
+ ppar = &im->im_cpm.cp_pepar;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_8260
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &io->iop_pdira;
+ dat = &io->iop_pdata;
+ ppar = &io->iop_ppara;
+ break;
+
+ case fsiop_portb:
+ dir = &io->iop_pdirb;
+ dat = &io->iop_pdatb;
+ ppar = &io->iop_pparb;
+ break;
+
+ case fsiop_portc:
+ dir = &io->iop_pdirc;
+ dat = &io->iop_pdatc;
+ ppar = &io->iop_pparc;
+ break;
+
+ case fsiop_portd:
+ dir = &io->iop_pdird;
+ dat = &io->iop_pdatd;
+ ppar = &io->iop_ppard;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+static inline void bb_set(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) | m);
+}
+
+static inline void bb_clr(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) & ~m);
+}
+
+static inline int bb_read(u8 *p, u8 m)
+{
+ return (in_8(p) & m) != 0;
+}
+
+static inline void mdio_active(struct fs_enet_mii_bus *bus)
+{
+ bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
+{
+ bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline int mdio_read(struct fs_enet_mii_bus *bus)
+{
+ return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+ else
+ bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdc(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+ else
+ bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+}
+
+static inline void mii_delay(struct fs_enet_mii_bus *bus)
+{
+ udelay(bus->bus_info->i.bitbang.delay);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
+{
+ int j;
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+ * The IEEE spec says this is a PHY optional requirement. The AMD
+ * 79C874 requires one after power up and one after a MII communications
+ * error. This means that we are doing more preambles than we need,
+ * but it is safer and will be much more robust.
+ */
+
+ mdio_active(bus);
+ mdio(bus, 1);
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, !read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* send the PHY address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (addr & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (reg & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ reg <<= 1;
+ }
+}
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ u16 rdreg;
+ int ret, j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+
+ bitbang_pre(bus, 1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ mdc(bus, 0);
+ mdio_tristate(bus);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if (mdio_read(bus) != 0) {
+ /* PHY didn't drive TA low */
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+ ret = -1;
+ goto out;
+ }
+
+ mdc(bus, 0);
+ mii_delay(bus);
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 1);
+ mii_delay(bus);
+ rdreg <<= 1;
+ rdreg |= mdio_read(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ }
+
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ ret = rdreg;
+out:
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ int j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+ u16 value = val & 0xffff;
+
+ bitbang_pre(bus, 0, addr, reg);
+
+ /* send the turnaround (10) */
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* write 16 bits of register data, MSB first */
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 0);
+ mdio(bus, (value & 0x8000) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ mdio_tristate(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+}
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
+ &bus->bitbang.mdio_dat,
+ &bus->bitbang.mdio_msk,
+ bi->i.bitbang.mdio_port,
+ bi->i.bitbang.mdio_bit);
+ if (r != 0)
+ return r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
+ &bus->bitbang.mdc_dat,
+ &bus->bitbang.mdc_msk,
+ bi->i.bitbang.mdc_port,
+ bi->i.bitbang.mdc_bit);
+ if (r != 0)
+ return r;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c
new file mode 100644
index 0000000..b3e192d
--- /dev/null
+++ b/drivers/net/fs_enet/mii-fixed.c
@@ -0,0 +1,92 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+static const u16 mii_regs[7] = {
+ 0x3100,
+ 0x786d,
+ 0x0fff,
+ 0x0fff,
+ 0x01e1,
+ 0x45e1,
+ 0x0003,
+};
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ int ret = 0;
+
+ if ((unsigned int)location >= ARRAY_SIZE(mii_regs))
+ return -1;
+
+ if (location != 5)
+ ret = mii_regs[location];
+ else
+ ret = bus->fixed.lpa;
+
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ /* do nothing */
+}
+
+int fs_mii_fixed_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+
+ bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */
+
+ /* if speed is fixed at 10Mb, remove 100Mb modes */
+ if (bi->i.fixed.speed == 10)
+ bus->fixed.lpa &= ~LPA_100;
+
+ /* if duplex is half, remove full duplex modes */
+ if (bi->i.fixed.duplex == 0)
+ bus->fixed.lpa &= ~LPA_DUPLEX;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 85d6dc0..3e9accf 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -390,10 +390,8 @@
"MTU change cancelled.\n",
ax->dev->name);
dev->mtu = ax->mtu;
- if (xbuff != NULL)
- kfree(xbuff);
- if (rbuff != NULL)
- kfree(rbuff);
+ kfree(xbuff);
+ kfree(rbuff);
return;
}
diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
index 7f583a3..f98ddf0 100644
--- a/drivers/net/ibm_emac/Makefile
+++ b/drivers/net/ibm_emac/Makefile
@@ -1,12 +1,11 @@
#
-# Makefile for the IBM PPC4xx EMAC controllers
+# Makefile for the PowerPC 4xx on-chip ethernet driver
#
obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
-
-# Only need this if you want to see additional debug messages
-ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
-ibm_emac-objs += ibm_emac_debug.o
-endif
+ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
+ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
+ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 15d5a0e..28c476f 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,110 +1,142 @@
/*
- * ibm_emac.h
+ * drivers/net/ibm_emac/ibm_emac.h
*
+ * Register definitions for PowerPC 4xx on-chip ethernet contoller
*
- * Armin Kuster akuster@mvista.com
- * June, 2002
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002-2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
+#ifndef __IBM_EMAC_H_
+#define __IBM_EMAC_H_
-#ifndef _IBM_EMAC_H_
-#define _IBM_EMAC_H_
-/* General defines needed for the driver */
+#include <linux/config.h>
+#include <linux/types.h>
-/* Emac */
-typedef struct emac_regs {
- u32 em0mr0;
- u32 em0mr1;
- u32 em0tmr0;
- u32 em0tmr1;
- u32 em0rmr;
- u32 em0isr;
- u32 em0iser;
- u32 em0iahr;
- u32 em0ialr;
- u32 em0vtpid;
- u32 em0vtci;
- u32 em0ptr;
- u32 em0iaht1;
- u32 em0iaht2;
- u32 em0iaht3;
- u32 em0iaht4;
- u32 em0gaht1;
- u32 em0gaht2;
- u32 em0gaht3;
- u32 em0gaht4;
- u32 em0lsah;
- u32 em0lsal;
- u32 em0ipgvr;
- u32 em0stacr;
- u32 em0trtr;
- u32 em0rwmr;
-} emac_t;
+/* This is a simple check to prevent use of this driver on non-tested SoCs */
+#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
+ !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
+ !defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
+#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
+#endif
-/* MODE REG 0 */
-#define EMAC_M0_RXI 0x80000000
-#define EMAC_M0_TXI 0x40000000
-#define EMAC_M0_SRST 0x20000000
-#define EMAC_M0_TXE 0x10000000
-#define EMAC_M0_RXE 0x08000000
-#define EMAC_M0_WKE 0x04000000
+/* EMAC registers Write Access rules */
+struct emac_regs {
+ u32 mr0; /* special */
+ u32 mr1; /* Reset */
+ u32 tmr0; /* special */
+ u32 tmr1; /* special */
+ u32 rmr; /* Reset */
+ u32 isr; /* Always */
+ u32 iser; /* Reset */
+ u32 iahr; /* Reset, R, T */
+ u32 ialr; /* Reset, R, T */
+ u32 vtpid; /* Reset, R, T */
+ u32 vtci; /* Reset, R, T */
+ u32 ptr; /* Reset, T */
+ u32 iaht1; /* Reset, R */
+ u32 iaht2; /* Reset, R */
+ u32 iaht3; /* Reset, R */
+ u32 iaht4; /* Reset, R */
+ u32 gaht1; /* Reset, R */
+ u32 gaht2; /* Reset, R */
+ u32 gaht3; /* Reset, R */
+ u32 gaht4; /* Reset, R */
+ u32 lsah;
+ u32 lsal;
+ u32 ipgvr; /* Reset, T */
+ u32 stacr; /* special */
+ u32 trtr; /* special */
+ u32 rwmr; /* Reset */
+ u32 octx;
+ u32 ocrx;
+ u32 ipcr;
+};
-/* MODE Reg 1 */
-#define EMAC_M1_FDE 0x80000000
-#define EMAC_M1_ILE 0x40000000
-#define EMAC_M1_VLE 0x20000000
-#define EMAC_M1_EIFC 0x10000000
-#define EMAC_M1_APP 0x08000000
-#define EMAC_M1_AEMI 0x02000000
-#define EMAC_M1_IST 0x01000000
-#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */
-#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */
-#define EMAC_M1_MF_100MBPS 0x00400000
-#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */
-#define EMAC_M1_TR 0x00008000
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_RFS_8K 0x00200000
-#define EMAC_M1_RFS_4K 0x00180000
-#define EMAC_M1_RFS_2K 0x00100000
-#define EMAC_M1_RFS_1K 0x00080000
-#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_8K 0x00040000
-#define EMAC_M1_TX_FIFO_4K 0x00030000
-#define EMAC_M1_TX_FIFO_2K 0x00020000
-#define EMAC_M1_TX_FIFO_1K 0x00010000
-#define EMAC_M1_TX_TR 0x00008000
-#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */
-#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */
-#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */
-#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */
-#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */
-#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */
-#else /* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K 0x00200000
-#define EMAC_M1_RFS_1K 0x00100000
-#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_1K 0x00040000
-#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */
-#define EMAC_M1_TR1_DEPEND 0x00004000
-#define EMAC_M1_TR1_MULTI 0x00002000
-#define EMAC_M1_JUMBO_ENABLE 0x00001000
-#endif /* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \
- EMAC_M1_APP | \
- EMAC_M1_TR | EMAC_M1_VLE)
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ETHTOOL_REGS_VER 0
+#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32))
+#else
+#define EMAC_ETHTOOL_REGS_VER 1
+#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs)
+#endif
-/* Transmit Mode Register 0 */
-#define EMAC_TMR0_GNP0 0x80000000
-#define EMAC_TMR0_GNP1 0x40000000
-#define EMAC_TMR0_GNPD 0x20000000
-#define EMAC_TMR0_FC 0x10000000
+/* EMACx_MR0 */
+#define EMAC_MR0_RXI 0x80000000
+#define EMAC_MR0_TXI 0x40000000
+#define EMAC_MR0_SRST 0x20000000
+#define EMAC_MR0_TXE 0x10000000
+#define EMAC_MR0_RXE 0x08000000
+#define EMAC_MR0_WKE 0x04000000
+
+/* EMACx_MR1 */
+#define EMAC_MR1_FDE 0x80000000
+#define EMAC_MR1_ILE 0x40000000
+#define EMAC_MR1_VLE 0x20000000
+#define EMAC_MR1_EIFC 0x10000000
+#define EMAC_MR1_APP 0x08000000
+#define EMAC_MR1_IST 0x01000000
+
+#define EMAC_MR1_MF_MASK 0x00c00000
+#define EMAC_MR1_MF_10 0x00000000
+#define EMAC_MR1_MF_100 0x00400000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_MF_1000 0x00000000
+#define EMAC_MR1_MF_1000GPCS 0x00000000
+#define EMAC_MR1_MF_IPPA(id) 0x00000000
+#else
+#define EMAC_MR1_MF_1000 0x00800000
+#define EMAC_MR1_MF_1000GPCS 0x00c00000
+#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6)
+#endif
+
+#define EMAC_TX_FIFO_SIZE 2048
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_RFS_4K 0x00300000
+#define EMAC_MR1_RFS_16K 0x00000000
+#define EMAC_RX_FIFO_SIZE(gige) 4096
+#define EMAC_MR1_TFS_2K 0x00080000
+#define EMAC_MR1_TR0_MULT 0x00008000
+#define EMAC_MR1_JPSM 0x00000000
+#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
+#else
+#define EMAC_MR1_RFS_4K 0x00180000
+#define EMAC_MR1_RFS_16K 0x00280000
+#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096)
+#define EMAC_MR1_TFS_2K 0x00020000
+#define EMAC_MR1_TR 0x00008000
+#define EMAC_MR1_MWSW_001 0x00001000
+#define EMAC_MR1_JPSM 0x00000800
+#define EMAC_MR1_OBCI_MASK 0x00000038
+#define EMAC_MR1_OBCI_50 0x00000000
+#define EMAC_MR1_OBCI_66 0x00000008
+#define EMAC_MR1_OBCI_83 0x00000010
+#define EMAC_MR1_OBCI_100 0x00000018
+#define EMAC_MR1_OBCI_100P 0x00000020
+#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \
+ (freq) <= 66 ? EMAC_MR1_OBCI_66 : \
+ (freq) <= 83 ? EMAC_MR1_OBCI_83 : \
+ (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
+#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
+ EMAC_MR1_MWSW_001 | EMAC_MR1_OBCI(opb))
+#endif
+
+/* EMACx_TMR0 */
+#define EMAC_TMR0_GNP 0x80000000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR0_DEFAULT 0x00000000
+#else
#define EMAC_TMR0_TFAE_2_32 0x00000001
#define EMAC_TMR0_TFAE_4_64 0x00000002
#define EMAC_TMR0_TFAE_8_128 0x00000003
@@ -112,14 +144,36 @@
#define EMAC_TMR0_TFAE_32_512 0x00000005
#define EMAC_TMR0_TFAE_64_1024 0x00000006
#define EMAC_TMR0_TFAE_128_2048 0x00000007
+#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
+#endif
+#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
-/* Receive Mode Register */
+/* EMACx_TMR1 */
+
+/* IBM manuals are not very clear here.
+ * This is my interpretation of how things are. --ebs
+ */
+#if defined(CONFIG_40x)
+#define EMAC_FIFO_ENTRY_SIZE 8
+#define EMAC_MAL_BURST_SIZE (16 * 4)
+#else
+#define EMAC_FIFO_ENTRY_SIZE 16
+#define EMAC_MAL_BURST_SIZE (64 * 4)
+#endif
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16))
+#else
+#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14))
+#endif
+
+/* EMACx_RMR */
#define EMAC_RMR_SP 0x80000000
#define EMAC_RMR_SFCS 0x40000000
-#define EMAC_RMR_ARRP 0x20000000
-#define EMAC_RMR_ARP 0x10000000
-#define EMAC_RMR_AROP 0x08000000
-#define EMAC_RMR_ARPI 0x04000000
+#define EMAC_RMR_RRP 0x20000000
+#define EMAC_RMR_RFP 0x10000000
+#define EMAC_RMR_ROP 0x08000000
+#define EMAC_RMR_RPIR 0x04000000
#define EMAC_RMR_PPP 0x02000000
#define EMAC_RMR_PME 0x01000000
#define EMAC_RMR_PMME 0x00800000
@@ -127,6 +181,9 @@
#define EMAC_RMR_MIAE 0x00200000
#define EMAC_RMR_BAE 0x00100000
#define EMAC_RMR_MAE 0x00080000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RMR_BASE 0x00000000
+#else
#define EMAC_RMR_RFAF_2_32 0x00000001
#define EMAC_RMR_RFAF_4_64 0x00000002
#define EMAC_RMR_RFAF_8_128 0x00000003
@@ -134,9 +191,21 @@
#define EMAC_RMR_RFAF_32_512 0x00000005
#define EMAC_RMR_RFAF_64_1024 0x00000006
#define EMAC_RMR_RFAF_128_2048 0x00000007
-#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE)
+#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048
+#endif
-/* Interrupt Status & enable Regs */
+/* EMACx_ISR & EMACx_ISER */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ISR_TXPE 0x00000000
+#define EMAC_ISR_RXPE 0x00000000
+#define EMAC_ISR_TXUE 0x00000000
+#define EMAC_ISR_RXOE 0x00000000
+#else
+#define EMAC_ISR_TXPE 0x20000000
+#define EMAC_ISR_RXPE 0x10000000
+#define EMAC_ISR_TXUE 0x08000000
+#define EMAC_ISR_RXOE 0x04000000
+#endif
#define EMAC_ISR_OVR 0x02000000
#define EMAC_ISR_PP 0x01000000
#define EMAC_ISR_BP 0x00800000
@@ -147,53 +216,62 @@
#define EMAC_ISR_PTLE 0x00040000
#define EMAC_ISR_ORE 0x00020000
#define EMAC_ISR_IRE 0x00010000
-#define EMAC_ISR_DBDM 0x00000200
-#define EMAC_ISR_DB0 0x00000100
-#define EMAC_ISR_SE0 0x00000080
-#define EMAC_ISR_TE0 0x00000040
-#define EMAC_ISR_DB1 0x00000020
-#define EMAC_ISR_SE1 0x00000010
-#define EMAC_ISR_TE1 0x00000008
+#define EMAC_ISR_SQE 0x00000080
+#define EMAC_ISR_TE 0x00000040
#define EMAC_ISR_MOS 0x00000002
#define EMAC_ISR_MOF 0x00000001
-/* STA CONTROL REG */
+/* EMACx_STACR */
+#define EMAC_STACR_PHYD_MASK 0xffff
+#define EMAC_STACR_PHYD_SHIFT 16
#define EMAC_STACR_OC 0x00008000
#define EMAC_STACR_PHYE 0x00004000
-#define EMAC_STACR_WRITE 0x00002000
-#define EMAC_STACR_READ 0x00001000
-#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */
-#define EMAC_STACR_CLK_66MHZ 0x00000400
-#define EMAC_STACR_CLK_100MHZ 0x00000C00
+#define EMAC_STACR_STAC_MASK 0x00003000
+#define EMAC_STACR_STAC_READ 0x00001000
+#define EMAC_STACR_STAC_WRITE 0x00002000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_STACR_OPBC_MASK 0x00000C00
+#define EMAC_STACR_OPBC_50 0x00000000
+#define EMAC_STACR_OPBC_66 0x00000400
+#define EMAC_STACR_OPBC_83 0x00000800
+#define EMAC_STACR_OPBC_100 0x00000C00
+#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
+ (freq) <= 66 ? EMAC_STACR_OPBC_66 : \
+ (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
+#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb)
+#else
+#define EMAC_STACR_BASE(opb) 0x00000000
+#endif
+#define EMAC_STACR_PCDA_MASK 0x1f
+#define EMAC_STACR_PCDA_SHIFT 5
+#define EMAC_STACR_PRA_MASK 0x1f
-/* Transmit Request Threshold Register */
-#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */
-#define EMAC_TRTR_1024 0x0f000000
-#define EMAC_TRTR_512 0x07000000
-#define EMAC_TRTR_256 0x03000000
-#define EMAC_TRTR_192 0x10000000
-#define EMAC_TRTR_128 0x01000000
+/* EMACx_TRTR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TRTR_SHIFT 27
+#else
+#define EMAC_TRTR_SHIFT 24
+#endif
+#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
+/* EMACx_RWMR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7))
+#else
+#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6))
+#endif
+
+/* EMAC specific TX descriptor control fields (write access) */
#define EMAC_TX_CTRL_GFCS 0x0200
#define EMAC_TX_CTRL_GP 0x0100
#define EMAC_TX_CTRL_ISA 0x0080
#define EMAC_TX_CTRL_RSA 0x0040
#define EMAC_TX_CTRL_IVT 0x0020
#define EMAC_TX_CTRL_RVT 0x0010
-#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */
-#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */
+#define EMAC_TX_CTRL_TAH_CSUM 0x000e
-#define EMAC_TX_CTRL_DFLT ( \
- MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP )
-
-/* madmal transmit status / Control bits */
+/* EMAC specific TX descriptor status fields (read access) */
#define EMAC_TX_ST_BFCS 0x0200
-#define EMAC_TX_ST_BPP 0x0100
#define EMAC_TX_ST_LCS 0x0080
#define EMAC_TX_ST_ED 0x0040
#define EMAC_TX_ST_EC 0x0020
@@ -202,8 +280,16 @@
#define EMAC_TX_ST_SC 0x0004
#define EMAC_TX_ST_UR 0x0002
#define EMAC_TX_ST_SQE 0x0001
+#if !defined(CONFIG_IBM_EMAC_TAH)
+#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+ EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
+ EMAC_TX_ST_MC | EMAC_TX_ST_UR))
+#else
+#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+ EMAC_TX_ST_EC | EMAC_TX_ST_LC))
+#endif
-/* madmal receive status / Control bits */
+/* EMAC specific RX descriptor status fields (read access) */
#define EMAC_RX_ST_OE 0x0200
#define EMAC_RX_ST_PP 0x0100
#define EMAC_RX_ST_BP 0x0080
@@ -214,54 +300,10 @@
#define EMAC_RX_ST_PTL 0x0004
#define EMAC_RX_ST_ORE 0x0002
#define EMAC_RX_ST_IRE 0x0001
-#define EMAC_BAD_RX_PACKET 0x02ff
-#define EMAC_CSUM_VER_ERROR 0x0003
-
-/* identify a bad rx packet dependent on emac features */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_IS_BAD_RX_PACKET(desc) \
- (((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \
- ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \
- ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE)))
-#else
-#define EMAC_IS_BAD_RX_PACKET(desc) \
- (desc & EMAC_BAD_RX_PACKET)
-#endif
-
-/* SoC implementation specific EMAC register defaults */
-#if defined(CONFIG_440GP)
-#define EMAC_RWMR_DEFAULT 0x80009000
-#define EMAC_TMR0_DEFAULT 0x00000000
-#define EMAC_TMR1_DEFAULT 0xf8640000
-#elif defined(CONFIG_440GX)
-#define EMAC_RWMR_DEFAULT 0x1000a200
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
-#define EMAC_TMR1_DEFAULT 0xa00f0000
-#elif defined(CONFIG_440SP)
-#define EMAC_RWMR_DEFAULT 0x08002000
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048
-#define EMAC_TMR1_DEFAULT 0xf8200000
-#else
-#define EMAC_RWMR_DEFAULT 0x0f002000
-#define EMAC_TMR0_DEFAULT 0x00000000
-#define EMAC_TMR1_DEFAULT 0x380f0000
-#endif /* CONFIG_440GP */
-
-/* Revision specific EMAC register defaults */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \
- EMAC_M1_OPB_CLK_83 | \
- EMAC_M1_TX_MWSW)
-#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \
- EMAC_RMR_RFAF_128_2048)
-#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \
- EMAC_TMR0_DEFAULT)
-#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024
-#else /* !CONFIG_IBM_EMAC4 */
-#define EMAC_M1_DEFAULT EMAC_M1_BASE
-#define EMAC_RMR_DEFAULT EMAC_RMR_BASE
-#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0
-#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600
-#endif /* CONFIG_IBM_EMAC4 */
-
-#endif
+#define EMAC_RX_TAH_BAD_CSUM 0x0003
+#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
+ EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
+ EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
+ EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
+ EMAC_RX_ST_IRE )
+#endif /* __IBM_EMAC_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 14e9b631..943fbd1 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1,13 +1,14 @@
/*
- * ibm_emac_core.c
+ * drivers/net/ibm_emac/ibm_emac_core.c
*
- * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
- * processors.
- *
- * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Driver for PowerPC 4xx on-chip ethernet controller.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
- *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
*
@@ -15,29 +16,24 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- * TODO
- * - Check for races in the "remove" code path
- * - Add some Power Management to the MAC and the PHY
- * - Audit remaining of non-rewritten code (--BenH)
- * - Cleanup message display using msglevel mecanism
- * - Address all errata
- * - Audit all register update paths to ensure they
- * are being written post soft reset if required.
+ *
*/
+
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/crc32.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/bitops.h>
@@ -45,1691 +41,1893 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/crc32.h>
-
#include "ibm_emac_core.h"
-
-//#define MDIO_DEBUG(fmt) printk fmt
-#define MDIO_DEBUG(fmt)
-
-//#define LINK_DEBUG(fmt) printk fmt
-#define LINK_DEBUG(fmt)
-
-//#define PKT_DEBUG(fmt) printk fmt
-#define PKT_DEBUG(fmt)
-
-#define DRV_NAME "emac"
-#define DRV_VERSION "2.0"
-#define DRV_AUTHOR "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
-#define DRV_DESC "IBM EMAC Ethernet driver"
+#include "ibm_emac_debug.h"
/*
- * When mdio_idx >= 0, contains a list of emac ocp_devs
- * that have had their initialization deferred until the
- * common MDIO controller has been initialized.
+ * Lack of dma_unmap_???? calls is intentional.
+ *
+ * API-correct usage requires additional support state information to be
+ * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
+ * EMAC design (e.g. TX buffer passed from network stack can be split into
+ * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
+ * maintaining such information will add additional overhead.
+ * Current DMA API implementation for 4xx processors only ensures cache coherency
+ * and dma_unmap_???? routines are empty and are likely to stay this way.
+ * I decided to omit dma_unmap_??? calls because I don't want to add additional
+ * complexity just for the sake of following some abstract API, when it doesn't
+ * add any real benefit to the driver. I understand that this decision maybe
+ * controversial, but I really tried to make code API-correct and efficient
+ * at the same time and didn't come up with code I liked :(. --ebs
*/
-LIST_HEAD(emac_init_list);
-MODULE_AUTHOR(DRV_AUTHOR);
+#define DRV_NAME "emac"
+#define DRV_VERSION "3.53"
+#define DRV_DESC "PPC 4xx OCP EMAC driver"
+
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR
+ ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
MODULE_LICENSE("GPL");
-static int skb_res = SKB_RES;
-module_param(skb_res, int, 0444);
-MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
- "The 405 handles a misaligned IP header fine but\n"
- "this can help if you are routing to a tunnel or a\n"
- "device that needs aligned data. 0..2");
+/* minimum number of free TX descriptors required to wake up TX process */
+#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
-#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
-
-static unsigned int rgmii_enable[] = {
- RGMII_RTBI,
- RGMII_RGMII,
- RGMII_TBI,
- RGMII_GMII
-};
-
-static unsigned int rgmii_speed_mask[] = {
- RGMII_MII2_SPDMASK,
- RGMII_MII3_SPDMASK
-};
-
-static unsigned int rgmii_speed100[] = {
- RGMII_MII2_100MB,
- RGMII_MII3_100MB
-};
-
-static unsigned int rgmii_speed1000[] = {
- RGMII_MII2_1000MB,
- RGMII_MII3_1000MB
-};
-
-#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
-
-static unsigned int zmii_enable[][4] = {
- {ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
- ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
- {ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
- ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
- {ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
- ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
- {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
-};
-
-static unsigned int mdi_enable[] = {
- ZMII_MDI0,
- ZMII_MDI1,
- ZMII_MDI2,
- ZMII_MDI3
-};
-
-static unsigned int zmii_speed = 0x0;
-static unsigned int zmii_speed100[] = {
- ZMII_MII0_100MB,
- ZMII_MII1_100MB,
- ZMII_MII2_100MB,
- ZMII_MII3_100MB
-};
+/* If packet size is less than this number, we allocate small skb and copy packet
+ * contents into it instead of just sending original big skb up
+ */
+#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
/* Since multiple EMACs share MDIO lines in various ways, we need
* to avoid re-using the same PHY ID in cases where the arch didn't
* setup precise phy_map entries
*/
-static u32 busy_phy_map = 0;
+static u32 busy_phy_map;
-/* If EMACs share a common MDIO device, this points to it */
-static struct net_device *mdio_ndev = NULL;
-
-struct emac_def_dev {
- struct list_head link;
- struct ocp_device *ocpdev;
- struct ibm_ocp_mal *mal;
-};
-
-static struct net_device_stats *emac_stats(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- return &fep->stats;
-};
-
-static int
-emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
- const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
- int mode = -1;
-
- if (!rgmii) {
- rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
-
- if (rgmii == NULL) {
- printk(KERN_ERR
- "rgmii%d: Out of memory allocating RGMII structure!\n",
- rgmii_dev->def->index);
- return -ENOMEM;
- }
-
- memset(rgmii, 0, sizeof(*rgmii));
-
- rgmii->base =
- (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
- sizeof(*rgmii->base));
- if (rgmii->base == NULL) {
- printk(KERN_ERR
- "rgmii%d: Cannot ioremap bridge registers!\n",
- rgmii_dev->def->index);
-
- kfree(rgmii);
- return -ENOMEM;
- }
- ocp_set_drvdata(rgmii_dev, rgmii);
- }
-
- if (phy_mode) {
- switch (phy_mode) {
- case PHY_MODE_GMII:
- mode = GMII;
- break;
- case PHY_MODE_TBI:
- mode = TBI;
- break;
- case PHY_MODE_RTBI:
- mode = RTBI;
- break;
- case PHY_MODE_RGMII:
- default:
- mode = RGMII;
- }
- rgmii->base->fer &= ~RGMII_FER_MASK(input);
- rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
- } else {
- switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
- input)) {
- case RGMII_RTBI:
- mode = RTBI;
- break;
- case RGMII_RGMII:
- mode = RGMII;
- break;
- case RGMII_TBI:
- mode = TBI;
- break;
- case RGMII_GMII:
- mode = GMII;
- }
- }
-
- /* Set mode to RGMII if nothing valid is detected */
- if (mode < 0)
- mode = RGMII;
-
- printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
- rgmii_dev->def->index, input, mode_name[mode]);
-
- rgmii->mode[input] = mode;
- rgmii->users++;
-
- return 0;
-}
-
-static void
-emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
- unsigned int rgmii_speed;
-
- rgmii_speed = in_be32(&rgmii->base->ssr);
-
- rgmii_speed &= ~rgmii_speed_mask[input];
-
- if (speed == 1000)
- rgmii_speed |= rgmii_speed1000[input];
- else if (speed == 100)
- rgmii_speed |= rgmii_speed100[input];
-
- out_be32(&rgmii->base->ssr, rgmii_speed);
-}
-
-static void emac_close_rgmii(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
- BUG_ON(!rgmii || rgmii->users == 0);
-
- if (!--rgmii->users) {
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)rgmii->base);
- kfree(rgmii);
- }
-}
-
-static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
- const char *mode_name[] = { "SMII", "RMII", "MII" };
- int mode = -1;
-
- if (!zmii) {
- zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
- if (zmii == NULL) {
- printk(KERN_ERR
- "zmii%d: Out of memory allocating ZMII structure!\n",
- zmii_dev->def->index);
- return -ENOMEM;
- }
- memset(zmii, 0, sizeof(*zmii));
-
- zmii->base =
- (struct zmii_regs *)ioremap(zmii_dev->def->paddr,
- sizeof(*zmii->base));
- if (zmii->base == NULL) {
- printk(KERN_ERR
- "zmii%d: Cannot ioremap bridge registers!\n",
- zmii_dev->def->index);
-
- kfree(zmii);
- return -ENOMEM;
- }
- ocp_set_drvdata(zmii_dev, zmii);
- }
-
- if (phy_mode) {
- switch (phy_mode) {
- case PHY_MODE_MII:
- mode = MII;
- break;
- case PHY_MODE_RMII:
- mode = RMII;
- break;
- case PHY_MODE_SMII:
- default:
- mode = SMII;
- }
- zmii->base->fer &= ~ZMII_FER_MASK(input);
- zmii->base->fer |= zmii_enable[input][mode];
- } else {
- switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
- case ZMII_MII0:
- mode = MII;
- break;
- case ZMII_RMII0:
- mode = RMII;
- break;
- case ZMII_SMII0:
- mode = SMII;
- }
- }
-
- /* Set mode to SMII if nothing valid is detected */
- if (mode < 0)
- mode = SMII;
-
- printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
- zmii_dev->def->index, input, mode_name[mode]);
-
- zmii->mode[input] = mode;
- zmii->users++;
-
- return 0;
-}
-
-static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
-{
- u32 mask;
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
- mask = in_be32(&zmii->base->fer);
- mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */
- mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
- out_be32(&zmii->base->fer, mask);
-}
-
-static void
-emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
- if (speed == 100)
- zmii_speed |= zmii_speed100[input];
- else
- zmii_speed &= ~zmii_speed100[input];
-
- out_be32(&zmii->base->ssr, zmii_speed);
-}
-
-static void emac_close_zmii(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
- BUG_ON(!zmii || zmii->users == 0);
-
- if (!--zmii->users) {
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)zmii->base);
- kfree(zmii);
- }
-}
-
-int emac_phy_read(struct net_device *dev, int mii_id, int reg)
-{
- int count;
- uint32_t stacr;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
- reg));
-
- /* Enable proper ZMII port */
- if (fep->zmii_dev)
- emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
-
- /* Use the EMAC that has the MDIO port */
- if (fep->mdio_dev) {
- dev = fep->mdio_dev;
- fep = dev->priv;
- emacp = fep->emacp;
- }
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
- return -1;
- }
-
- /* Clear the speed bits and make a read request to the PHY */
- stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
- stacr |= ((mii_id & 0x1F) << 5);
-
- out_be32(&emacp->em0stacr, stacr);
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
- return -1;
- }
-
- /* Check for a read error */
- if (stacr & EMAC_STACR_PHYE) {
- MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
- return -1;
- }
-
- MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
-
- return (stacr >> 16);
-}
-
-void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
-{
- int count;
- uint32_t stacr;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
- dev->name, mii_id, reg, data));
-
- /* Enable proper ZMII port */
- if (fep->zmii_dev)
- emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
-
- /* Use the EMAC that has the MDIO port */
- if (fep->mdio_dev) {
- dev = fep->mdio_dev;
- fep = dev->priv;
- emacp = fep->emacp;
- }
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
- return;
- }
-
- /* Clear the speed bits and make a read request to the PHY */
-
- stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
- stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
-
- out_be32(&emacp->em0stacr, stacr);
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0)
- printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
-
- /* Check for a write error */
- if ((stacr & EMAC_STACR_PHYE) != 0) {
- MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
- }
-}
-
-static void emac_txeob_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
- unsigned long flags;
-
- spin_lock_irqsave(&fep->lock, flags);
-
- PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
-
- while (fep->tx_cnt &&
- !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
-
- if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
- /* Tell the system the transmit completed. */
- dma_unmap_single(&fep->ocpdev->dev,
- fep->tx_desc[fep->ack_slot].data_ptr,
- fep->tx_desc[fep->ack_slot].data_len,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
-
- if (fep->tx_desc[fep->ack_slot].ctrl &
- (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
- fep->stats.collisions++;
- }
-
- fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
- if (++fep->ack_slot == NUM_TX_BUFF)
- fep->ack_slot = 0;
-
- fep->tx_cnt--;
- }
- if (fep->tx_cnt < NUM_TX_BUFF)
- netif_wake_queue(dev);
-
- PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
-
- spin_unlock_irqrestore(&fep->lock, flags);
-}
-
-/*
- Fill/Re-fill the rx chain with valid ctrl/ptrs.
- This function will fill from rx_slot up to the parm end.
- So to completely fill the chain pre-set rx_slot to 0 and
- pass in an end of 0.
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
+/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
+ * with PHY RX clock problem.
+ * 440EP has more sane SDR0_MFR register implementation than 440GX, which
+ * also allows controlling each EMAC clock
*/
-static void emac_rx_fill(struct net_device *dev, int end)
+static inline void EMAC_RX_CLK_TX(int idx)
{
- int i;
- struct ocp_enet_private *fep = dev->priv;
-
- i = fep->rx_slot;
- do {
- /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
- * it breaks our cache line alignement. However, we still allocate
- * +16 so that we end up allocating the exact same size as
- * dev_alloc_skb() would do.
- * Also, because of the skb_res, the max DMA size we give to EMAC
- * is slighly wrong, causing it to potentially DMA 2 more bytes
- * from a broken/oversized packet. These 16 bytes will take care
- * that we don't walk on somebody else toes with that.
- */
- fep->rx_skb[i] =
- alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
-
- if (fep->rx_skb[i] == NULL) {
- /* Keep rx_slot here, the next time clean/fill is called
- * we will try again before the MAL wraps back here
- * If the MAL tries to use this descriptor with
- * the EMPTY bit off it will cause the
- * rxde interrupt. That is where we will
- * try again to allocate an sk_buff.
- */
- break;
-
- }
-
- if (skb_res)
- skb_reserve(fep->rx_skb[i], skb_res);
-
- /* We must NOT dma_map_single the cache line right after the
- * buffer, so we must crop our sync size to account for the
- * reserved space
- */
- fep->rx_desc[i].data_ptr =
- (unsigned char *)dma_map_single(&fep->ocpdev->dev,
- (void *)fep->rx_skb[i]->
- data,
- fep->rx_buffer_size -
- skb_res, DMA_FROM_DEVICE);
-
- /*
- * Some 4xx implementations use the previously
- * reserved bits in data_len to encode the MS
- * 4-bits of a 36-bit physical address (ERPN)
- * This must be initialized.
- */
- fep->rx_desc[i].data_len = 0;
- fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
- (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-
- } while ((i = (i + 1) % NUM_RX_BUFF) != end);
-
- fep->rx_slot = i;
-}
-
-static void
-emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
-{
- struct ocp_enet_private *fep = dev->priv;
-
- /* Exit if interface has no TAH engine */
- if (!fep->tah_dev) {
- skb->ip_summed = CHECKSUM_NONE;
- return;
- }
-
- /* Check for TCP/UDP/IP csum error */
- if (ctrl & EMAC_CSUM_VER_ERROR) {
- /* Let the stack verify checksum errors */
- skb->ip_summed = CHECKSUM_NONE;
-/* adapter->hw_csum_err++; */
- } else {
- /* Csum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-/* adapter->hw_csum_good++; */
- }
-}
-
-static int emac_rx_clean(struct net_device *dev)
-{
- int i, b, bnum = 0, buf[6];
- int error, frame_length;
- struct ocp_enet_private *fep = dev->priv;
- unsigned short ctrl;
-
- i = fep->rx_slot;
-
- PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
-
- do {
- if (fep->rx_skb[i] == NULL)
- continue; /*we have already handled the packet but haved failed to alloc */
- /*
- since rx_desc is in uncached mem we don't keep reading it directly
- we pull out a local copy of ctrl and do the checks on the copy.
- */
- ctrl = fep->rx_desc[i].ctrl;
- if (ctrl & MAL_RX_CTRL_EMPTY)
- break; /*we don't have any more ready packets */
-
- if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
- fep->stats.rx_errors++;
- fep->stats.rx_dropped++;
-
- if (ctrl & EMAC_RX_ST_OE)
- fep->stats.rx_fifo_errors++;
- if (ctrl & EMAC_RX_ST_AE)
- fep->stats.rx_frame_errors++;
- if (ctrl & EMAC_RX_ST_BFCS)
- fep->stats.rx_crc_errors++;
- if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
- EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
- fep->stats.rx_length_errors++;
- } else {
- if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
- (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
- /* Single descriptor packet */
- emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
- /* Send the skb up the chain. */
- frame_length = fep->rx_desc[i].data_len - 4;
- skb_put(fep->rx_skb[i], frame_length);
- fep->rx_skb[i]->dev = dev;
- fep->rx_skb[i]->protocol =
- eth_type_trans(fep->rx_skb[i], dev);
- error = netif_rx(fep->rx_skb[i]);
-
- if ((error == NET_RX_DROP) ||
- (error == NET_RX_BAD)) {
- fep->stats.rx_dropped++;
- } else {
- fep->stats.rx_packets++;
- fep->stats.rx_bytes += frame_length;
- }
- fep->rx_skb[i] = NULL;
- } else {
- /* Multiple descriptor packet */
- if (ctrl & MAL_RX_CTRL_FIRST) {
- if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
- ctrl & MAL_RX_CTRL_EMPTY)
- break;
- bnum = 0;
- buf[bnum] = i;
- ++bnum;
- continue;
- }
- if (((ctrl & MAL_RX_CTRL_FIRST) !=
- MAL_RX_CTRL_FIRST) &&
- ((ctrl & MAL_RX_CTRL_LAST) !=
- MAL_RX_CTRL_LAST)) {
- if (fep->rx_desc[(i + 1) %
- NUM_RX_BUFF].ctrl &
- MAL_RX_CTRL_EMPTY) {
- i = buf[0];
- break;
- }
- buf[bnum] = i;
- ++bnum;
- continue;
- }
- if (ctrl & MAL_RX_CTRL_LAST) {
- buf[bnum] = i;
- ++bnum;
- skb_put(fep->rx_skb[buf[0]],
- fep->rx_desc[buf[0]].data_len);
- for (b = 1; b < bnum; b++) {
- /*
- * MAL is braindead, we need
- * to copy the remainder
- * of the packet from the
- * latter descriptor buffers
- * to the first skb. Then
- * dispose of the source
- * skbs.
- *
- * Once the stack is fixed
- * to handle frags on most
- * protocols we can generate
- * a fragmented skb with
- * no copies.
- */
- memcpy(fep->rx_skb[buf[0]]->
- data +
- fep->rx_skb[buf[0]]->len,
- fep->rx_skb[buf[b]]->
- data,
- fep->rx_desc[buf[b]].
- data_len);
- skb_put(fep->rx_skb[buf[0]],
- fep->rx_desc[buf[b]].
- data_len);
- dma_unmap_single(&fep->ocpdev->
- dev,
- fep->
- rx_desc[buf
- [b]].
- data_ptr,
- fep->
- rx_desc[buf
- [b]].
- data_len,
- DMA_FROM_DEVICE);
- dev_kfree_skb(fep->
- rx_skb[buf[b]]);
- }
- emac_rx_csum(dev, ctrl,
- fep->rx_skb[buf[0]]);
-
- fep->rx_skb[buf[0]]->dev = dev;
- fep->rx_skb[buf[0]]->protocol =
- eth_type_trans(fep->rx_skb[buf[0]],
- dev);
- error = netif_rx(fep->rx_skb[buf[0]]);
-
- if ((error == NET_RX_DROP)
- || (error == NET_RX_BAD)) {
- fep->stats.rx_dropped++;
- } else {
- fep->stats.rx_packets++;
- fep->stats.rx_bytes +=
- fep->rx_skb[buf[0]]->len;
- }
- for (b = 0; b < bnum; b++)
- fep->rx_skb[buf[b]] = NULL;
- }
- }
- }
- } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
-
- PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
-
- return i;
-}
-
-static void emac_rxeob_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
+ local_irq_save(flags);
+
+#if defined(CONFIG_405EP)
+ mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
+#else /* CONFIG_440EP */
+ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
+#endif
+
+ local_irq_restore(flags);
+}
+
+static inline void EMAC_RX_CLK_DEFAULT(int idx)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+
+#if defined(CONFIG_405EP)
+ mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
+#else /* CONFIG_440EP */
+ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
+#endif
+
+ local_irq_restore(flags);
+}
+#else
+#define EMAC_RX_CLK_TX(idx) ((void)0)
+#define EMAC_RX_CLK_DEFAULT(idx) ((void)0)
+#endif
+
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
+/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
+ * unfortunately this is less flexible than 440EP case, because it's a global
+ * setting for all EMACs, therefore we do this clock trick only during probe.
+ */
+#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \
+ SDR_READ(DCRN_SDR_MFR) | 0x08000000)
+#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \
+ SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
+#else
+#define EMAC_CLK_INTERNAL ((void)0)
+#define EMAC_CLK_EXTERNAL ((void)0)
+#endif
+
+/* I don't want to litter system log with timeout errors
+ * when we have brain-damaged PHY.
+ */
+static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
+ const char *error)
+{
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+ DBG("%d: %s" NL, dev->def->index, error);
+#else
+ if (net_ratelimit())
+ printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
+#endif
+}
+
+/* PHY polling intervals */
+#define PHY_POLL_LINK_ON HZ
+#define PHY_POLL_LINK_OFF (HZ / 5)
+
+/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
+static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
+ "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
+ "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
+ "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
+ "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
+ "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
+ "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
+ "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
+ "rx_bad_packet", "rx_runt_packet", "rx_short_event",
+ "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
+ "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
+ "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
+ "tx_bd_excessive_collisions", "tx_bd_late_collision",
+ "tx_bd_multple_collisions", "tx_bd_single_collision",
+ "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
+ "tx_errors"
+};
+
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs);
+static void emac_clean_tx_ring(struct ocp_enet_private *dev);
+
+static inline int emac_phy_supports_gige(int phy_mode)
+{
+ return phy_mode == PHY_MODE_GMII ||
+ phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline int emac_phy_gpcs(int phy_mode)
+{
+ return phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline void emac_tx_enable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: tx_enable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (!(r & EMAC_MR0_TXE))
+ out_be32(&p->mr0, r | EMAC_MR0_TXE);
+ local_irq_restore(flags);
+}
+
+static void emac_tx_disable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: tx_disable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_TXE) {
+ int n = 300;
+ out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
+ while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev, "TX disable timeout");
+ }
+ local_irq_restore(flags);
+}
+
+static void emac_rx_enable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+ if (unlikely(dev->commac.rx_stopped))
+ goto out;
+
+ DBG("%d: rx_enable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (!(r & EMAC_MR0_RXE)) {
+ if (unlikely(!(r & EMAC_MR0_RXI))) {
+ /* Wait if previous async disable is still in progress */
+ int n = 100;
+ while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev,
+ "RX disable timeout");
+ }
+ out_be32(&p->mr0, r | EMAC_MR0_RXE);
+ }
+ out:
+ local_irq_restore(flags);
+}
+
+static void emac_rx_disable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: rx_disable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_RXE) {
+ int n = 300;
+ out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+ while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev, "RX disable timeout");
+ }
+ local_irq_restore(flags);
+}
+
+static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: rx_disable_async" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_RXE)
+ out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+ local_irq_restore(flags);
+}
+
+static int emac_reset(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ int n = 20;
+
+ DBG("%d: reset" NL, dev->def->index);
+
+ local_irq_save(flags);
+
+ if (!dev->reset_failed) {
+ /* 40x erratum suggests stopping RX channel before reset,
+ * we stop TX as well
+ */
+ emac_rx_disable(dev);
+ emac_tx_disable(dev);
+ }
+
+ out_be32(&p->mr0, EMAC_MR0_SRST);
+ while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
+ --n;
+ local_irq_restore(flags);
+
+ if (n) {
+ dev->reset_failed = 0;
+ return 0;
+ } else {
+ emac_report_timeout_error(dev, "reset timeout");
+ dev->reset_failed = 1;
+ return -ETIMEDOUT;
+ }
+}
+
+static void emac_hash_mc(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ u16 gaht[4] = { 0 };
+ struct dev_mc_list *dmi;
+
+ DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
+
+ for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
+ int bit;
+ DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL,
+ dev->def->index,
+ dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2],
+ dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]);
+
+ bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
+ gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
+ }
+ out_be32(&p->gaht1, gaht[0]);
+ out_be32(&p->gaht2, gaht[1]);
+ out_be32(&p->gaht3, gaht[2]);
+ out_be32(&p->gaht4, gaht[3]);
+}
+
+static inline u32 emac_iff2rmr(struct net_device *ndev)
+{
+ u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
+ EMAC_RMR_BASE;
+
+ if (ndev->flags & IFF_PROMISC)
+ r |= EMAC_RMR_PME;
+ else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
+ r |= EMAC_RMR_PMME;
+ else if (ndev->mc_count > 0)
+ r |= EMAC_RMR_MAE;
+
+ return r;
+}
+
+static inline int emac_opb_mhz(void)
+{
+ return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
+}
+
+/* BHs disabled */
+static int emac_configure(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ struct net_device *ndev = dev->ndev;
+ int gige;
+ u32 r;
+
+ DBG("%d: configure" NL, dev->def->index);
+
+ if (emac_reset(dev) < 0)
+ return -ETIMEDOUT;
+
+ tah_reset(dev->tah_dev);
+
+ /* Mode register */
+ r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
+ if (dev->phy.duplex == DUPLEX_FULL)
+ r |= EMAC_MR1_FDE;
+ switch (dev->phy.speed) {
+ case SPEED_1000:
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ r |= EMAC_MR1_MF_1000GPCS |
+ EMAC_MR1_MF_IPPA(dev->phy.address);
+
+ /* Put some arbitrary OUI, Manuf & Rev IDs so we can
+ * identify this GPCS PHY later.
+ */
+ out_be32(&p->ipcr, 0xdeadbeef);
+ } else
+ r |= EMAC_MR1_MF_1000;
+ r |= EMAC_MR1_RFS_16K;
+ gige = 1;
+
+ if (dev->ndev->mtu > ETH_DATA_LEN)
+ r |= EMAC_MR1_JPSM;
+ break;
+ case SPEED_100:
+ r |= EMAC_MR1_MF_100;
+ /* Fall through */
+ default:
+ r |= EMAC_MR1_RFS_4K;
+ gige = 0;
+ break;
+ }
+
+ if (dev->rgmii_dev)
+ rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
+ dev->phy.speed);
+ else
+ zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
+
+#if !defined(CONFIG_40x)
+ /* on 40x erratum forces us to NOT use integrated flow control,
+ * let's hope it works on 44x ;)
+ */
+ if (dev->phy.duplex == DUPLEX_FULL) {
+ if (dev->phy.pause)
+ r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
+ else if (dev->phy.asym_pause)
+ r |= EMAC_MR1_APP;
+ }
+#endif
+ out_be32(&p->mr1, r);
+
+ /* Set individual MAC address */
+ out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
+ out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
+ (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
+ ndev->dev_addr[5]);
+
+ /* VLAN Tag Protocol ID */
+ out_be32(&p->vtpid, 0x8100);
+
+ /* Receive mode register */
+ r = emac_iff2rmr(ndev);
+ if (r & EMAC_RMR_MAE)
+ emac_hash_mc(dev);
+ out_be32(&p->rmr, r);
+
+ /* FIFOs thresholds */
+ r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
+ EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
+ out_be32(&p->tmr1, r);
+ out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
+
+ /* PAUSE frame is sent when RX FIFO reaches its high-water mark,
+ there should be still enough space in FIFO to allow the our link
+ partner time to process this frame and also time to send PAUSE
+ frame itself.
+
+ Here is the worst case scenario for the RX FIFO "headroom"
+ (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
+
+ 1) One maximum-length frame on TX 1522 bytes
+ 2) One PAUSE frame time 64 bytes
+ 3) PAUSE frame decode time allowance 64 bytes
+ 4) One maximum-length frame on RX 1522 bytes
+ 5) Round-trip propagation delay of the link (100Mb) 15 bytes
+ ----------
+ 3187 bytes
+
+ I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
+ low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
+ */
+ r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
+ EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
+ out_be32(&p->rwmr, r);
+
+ /* Set PAUSE timer to the maximum */
+ out_be32(&p->ptr, 0xffff);
+
+ /* IRQ sources */
+ out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
+ EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
+ EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
+ EMAC_ISR_IRE | EMAC_ISR_TE);
+
+ /* We need to take GPCS PHY out of isolate mode after EMAC reset */
+ if (emac_phy_gpcs(dev->phy.mode))
+ mii_reset_phy(&dev->phy);
+
+ return 0;
+}
+
+/* BHs disabled */
+static void emac_reinitialize(struct ocp_enet_private *dev)
+{
+ DBG("%d: reinitialize" NL, dev->def->index);
+
+ if (!emac_configure(dev)) {
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+ }
+}
+
+/* BHs disabled */
+static void emac_full_tx_reset(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ DBG("%d: full_tx_reset" NL, dev->def->index);
+
+ emac_tx_disable(dev);
+ mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ emac_clean_tx_ring(dev);
+ dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
+
+ emac_configure(dev);
+
+ mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+
+ netif_wake_queue(ndev);
+}
+
+static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
+{
+ struct emac_regs *p = dev->emacp;
+ u32 r;
int n;
- spin_lock_irqsave(&fep->lock, flags);
- if ((n = emac_rx_clean(dev)) != fep->rx_slot)
- emac_rx_fill(dev, n);
- spin_unlock_irqrestore(&fep->lock, flags);
-}
+ DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
-/*
- * This interrupt should never occurr, we don't program
- * the MAL for contiunous mode.
- */
-static void emac_txde_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
+ /* Enable proper MDIO port */
+ zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
- printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
-
- emac_mac_dump(dev);
- emac_mal_dump(dev);
-
- /* Reenable the transmit channel */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-}
-
-/*
- * This interrupt should be very rare at best. This occurs when
- * the hardware has a problem with the receive descriptors. The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set. The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way. At that point the driver
- * will be restarted.
- */
-static void emac_rxde_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
- unsigned long flags;
-
- if (net_ratelimit()) {
- printk(KERN_WARNING "%s: receive descriptor error\n",
- fep->ndev->name);
-
- emac_mac_dump(dev);
- emac_mal_dump(dev);
- emac_desc_dump(dev);
+ /* Wait for management interface to become idle */
+ n = 10;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
}
- /* Disable RX channel */
- spin_lock_irqsave(&fep->lock, flags);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
+ /* Issue read command */
+ out_be32(&p->stacr,
+ EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
+ (reg & EMAC_STACR_PRA_MASK)
+ | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
- /* For now, charge the error against all emacs */
- fep->stats.rx_errors++;
+ /* Wait for read to complete */
+ n = 100;
+ while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
- /* so do we have any good packets still? */
- emac_rx_clean(dev);
+ if (unlikely(r & EMAC_STACR_PHYE)) {
+ DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
+ id, reg);
+ return -EREMOTEIO;
+ }
- /* When the interface is restarted it resets processing to the
- * first descriptor in the table.
+ r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
+ DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
+ return r;
+ to:
+ DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
+ return -ETIMEDOUT;
+}
+
+static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
+ u16 val)
+{
+ struct emac_regs *p = dev->emacp;
+ int n;
+
+ DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
+ val);
+
+ /* Enable proper MDIO port */
+ zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
+
+ /* Wait for management interface to be idle */
+ n = 10;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
+
+ /* Issue write command */
+ out_be32(&p->stacr,
+ EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
+ (reg & EMAC_STACR_PRA_MASK) |
+ ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
+ (val << EMAC_STACR_PHYD_SHIFT));
+
+ /* Wait for write to complete */
+ n = 100;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
+ return;
+ to:
+ DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
+}
+
+static int emac_mdio_read(struct net_device *ndev, int id, int reg)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int res;
+
+ local_bh_disable();
+ res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+ (u8) reg);
+ local_bh_enable();
+ return res;
+}
+
+static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ local_bh_disable();
+ __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+ (u8) reg, (u16) val);
+ local_bh_enable();
+}
+
+/* BHs disabled */
+static void emac_set_multicast_list(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct emac_regs *p = dev->emacp;
+ u32 rmr = emac_iff2rmr(ndev);
+
+ DBG("%d: multicast %08x" NL, dev->def->index, rmr);
+ BUG_ON(!netif_running(dev->ndev));
+
+ /* I decided to relax register access rules here to avoid
+ * full EMAC reset.
+ *
+ * There is a real problem with EMAC4 core if we use MWSW_001 bit
+ * in MR1 register and do a full EMAC reset.
+ * One TX BD status update is delayed and, after EMAC reset, it
+ * never happens, resulting in TX hung (it'll be recovered by TX
+ * timeout handler eventually, but this is just gross).
+ * So we either have to do full TX reset or try to cheat here :)
+ *
+ * The only required change is to RX mode register, so I *think* all
+ * we need is just to stop RX channel. This seems to work on all
+ * tested SoCs. --ebs
*/
-
- fep->rx_slot = 0;
- emac_rx_fill(dev, 0);
-
- set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
- set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
-
- /* Reenable the receive channels */
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- spin_unlock_irqrestore(&fep->lock, flags);
+ emac_rx_disable(dev);
+ if (rmr & EMAC_RMR_MAE)
+ emac_hash_mc(dev);
+ out_be32(&p->rmr, rmr);
+ emac_rx_enable(dev);
}
-static irqreturn_t
-emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+/* BHs disabled */
+static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
{
- struct net_device *dev = dev_instance;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- unsigned long tmp_em0isr;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+ int rx_sync_size = emac_rx_sync_size(new_mtu);
+ int rx_skb_size = emac_rx_skb_size(new_mtu);
+ int i, ret = 0;
- /* EMAC interrupt */
- tmp_em0isr = in_be32(&emacp->em0isr);
- if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
- /* This error is a hard transmit error - could retransmit */
- fep->stats.tx_errors++;
+ emac_rx_disable(dev);
+ mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- /* Reenable the transmit channel */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-
- } else {
- fep->stats.rx_errors++;
+ if (dev->rx_sg_skb) {
+ ++dev->estats.rx_dropped_resize;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
}
- if (tmp_em0isr & EMAC_ISR_RP)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_ALE)
- fep->stats.rx_frame_errors++;
- if (tmp_em0isr & EMAC_ISR_BFCS)
- fep->stats.rx_crc_errors++;
- if (tmp_em0isr & EMAC_ISR_PTLE)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_ORE)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_TE0)
- fep->stats.tx_aborted_errors++;
+ /* Make a first pass over RX ring and mark BDs ready, dropping
+ * non-processed packets on the way. We need this as a separate pass
+ * to simplify error recovery in the case of allocation failure later.
+ */
+ for (i = 0; i < NUM_RX_BUFF; ++i) {
+ if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
+ ++dev->estats.rx_dropped_resize;
- emac_err_dump(dev, tmp_em0isr);
+ dev->rx_desc[i].data_len = 0;
+ dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
+ (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+ }
- out_be32(&emacp->em0isr, tmp_em0isr);
+ /* Reallocate RX ring only if bigger skb buffers are required */
+ if (rx_skb_size <= dev->rx_skb_size)
+ goto skip;
+
+ /* Second pass, allocate new skbs */
+ for (i = 0; i < NUM_RX_BUFF; ++i) {
+ struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
+ if (!skb) {
+ ret = -ENOMEM;
+ goto oom;
+ }
+
+ BUG_ON(!dev->rx_skb[i]);
+ dev_kfree_skb(dev->rx_skb[i]);
+
+ skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+ dev->rx_desc[i].data_ptr =
+ dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
+ DMA_FROM_DEVICE) + 2;
+ dev->rx_skb[i] = skb;
+ }
+ skip:
+ /* Check if we need to change "Jumbo" bit in MR1 */
+ if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
+ /* This is to prevent starting RX channel in emac_rx_enable() */
+ dev->commac.rx_stopped = 1;
+
+ dev->ndev->mtu = new_mtu;
+ emac_full_tx_reset(dev->ndev);
+ }
+
+ mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
+ oom:
+ /* Restart RX */
+ dev->commac.rx_stopped = dev->rx_slot = 0;
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_rx_enable(dev);
+
+ return ret;
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_change_mtu(struct net_device *ndev, int new_mtu)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int ret = 0;
+
+ if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
+ return -EINVAL;
+
+ DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
+
+ local_bh_disable();
+ if (netif_running(ndev)) {
+ /* Check if we really need to reinitalize RX ring */
+ if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
+ ret = emac_resize_rx_ring(dev, new_mtu);
+ }
+
+ if (!ret) {
+ ndev->mtu = new_mtu;
+ dev->rx_skb_size = emac_rx_skb_size(new_mtu);
+ dev->rx_sync_size = emac_rx_sync_size(new_mtu);
+ }
+ local_bh_enable();
+
+ return ret;
+}
+
+static void emac_clean_tx_ring(struct ocp_enet_private *dev)
+{
+ int i;
+ for (i = 0; i < NUM_TX_BUFF; ++i) {
+ if (dev->tx_skb[i]) {
+ dev_kfree_skb(dev->tx_skb[i]);
+ dev->tx_skb[i] = NULL;
+ if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
+ ++dev->estats.tx_dropped;
+ }
+ dev->tx_desc[i].ctrl = 0;
+ dev->tx_desc[i].data_ptr = 0;
+ }
+}
+
+static void emac_clean_rx_ring(struct ocp_enet_private *dev)
+{
+ int i;
+ for (i = 0; i < NUM_RX_BUFF; ++i)
+ if (dev->rx_skb[i]) {
+ dev->rx_desc[i].ctrl = 0;
+ dev_kfree_skb(dev->rx_skb[i]);
+ dev->rx_skb[i] = NULL;
+ dev->rx_desc[i].data_ptr = 0;
+ }
+
+ if (dev->rx_sg_skb) {
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ }
+}
+
+static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
+ int flags)
+{
+ struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ dev->rx_skb[slot] = skb;
+ dev->rx_desc[slot].data_len = 0;
+
+ skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+ dev->rx_desc[slot].data_ptr =
+ dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size,
+ DMA_FROM_DEVICE) + 2;
+ barrier();
+ dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+ (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+
+ return 0;
+}
+
+static void emac_print_link_status(struct ocp_enet_private *dev)
+{
+ if (netif_carrier_ok(dev->ndev))
+ printk(KERN_INFO "%s: link is up, %d %s%s\n",
+ dev->ndev->name, dev->phy.speed,
+ dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
+ dev->phy.pause ? ", pause enabled" :
+ dev->phy.asym_pause ? ", assymetric pause enabled" : "");
+ else
+ printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_open(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+ int err, i;
+
+ DBG("%d: open" NL, dev->def->index);
+
+ /* Setup error IRQ handler */
+ err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to request IRQ %d\n",
+ ndev->name, dev->def->irq);
+ return err;
+ }
+
+ /* Allocate RX ring */
+ for (i = 0; i < NUM_RX_BUFF; ++i)
+ if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
+ printk(KERN_ERR "%s: failed to allocate RX ring\n",
+ ndev->name);
+ goto oom;
+ }
+
+ local_bh_disable();
+ dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
+ dev->commac.rx_stopped = 0;
+ dev->rx_sg_skb = NULL;
+
+ if (dev->phy.address >= 0) {
+ int link_poll_interval;
+ if (dev->phy.def->ops->poll_link(&dev->phy)) {
+ dev->phy.def->ops->read_link(&dev->phy);
+ EMAC_RX_CLK_DEFAULT(dev->def->index);
+ netif_carrier_on(dev->ndev);
+ link_poll_interval = PHY_POLL_LINK_ON;
+ } else {
+ EMAC_RX_CLK_TX(dev->def->index);
+ netif_carrier_off(dev->ndev);
+ link_poll_interval = PHY_POLL_LINK_OFF;
+ }
+ mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+ emac_print_link_status(dev);
+ } else
+ netif_carrier_on(dev->ndev);
+
+ emac_configure(dev);
+ mal_poll_add(dev->mal, &dev->commac);
+ mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+ netif_start_queue(ndev);
+ local_bh_enable();
+
+ return 0;
+ oom:
+ emac_clean_rx_ring(dev);
+ free_irq(dev->def->irq, dev);
+ return -ENOMEM;
+}
+
+/* BHs disabled */
+static int emac_link_differs(struct ocp_enet_private *dev)
+{
+ u32 r = in_be32(&dev->emacp->mr1);
+
+ int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
+ int speed, pause, asym_pause;
+
+ if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS))
+ speed = SPEED_1000;
+ else if (r & EMAC_MR1_MF_100)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
+ case (EMAC_MR1_EIFC | EMAC_MR1_APP):
+ pause = 1;
+ asym_pause = 0;
+ break;
+ case EMAC_MR1_APP:
+ pause = 0;
+ asym_pause = 1;
+ break;
+ default:
+ pause = asym_pause = 0;
+ }
+ return speed != dev->phy.speed || duplex != dev->phy.duplex ||
+ pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
+}
+
+/* BHs disabled */
+static void emac_link_timer(unsigned long data)
+{
+ struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
+ int link_poll_interval;
+
+ DBG2("%d: link timer" NL, dev->def->index);
+
+ if (dev->phy.def->ops->poll_link(&dev->phy)) {
+ if (!netif_carrier_ok(dev->ndev)) {
+ EMAC_RX_CLK_DEFAULT(dev->def->index);
+
+ /* Get new link parameters */
+ dev->phy.def->ops->read_link(&dev->phy);
+
+ if (dev->tah_dev || emac_link_differs(dev))
+ emac_full_tx_reset(dev->ndev);
+
+ netif_carrier_on(dev->ndev);
+ emac_print_link_status(dev);
+ }
+ link_poll_interval = PHY_POLL_LINK_ON;
+ } else {
+ if (netif_carrier_ok(dev->ndev)) {
+ EMAC_RX_CLK_TX(dev->def->index);
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+ emac_reinitialize(dev);
+#endif
+ netif_carrier_off(dev->ndev);
+ emac_print_link_status(dev);
+ }
+
+ /* Retry reset if the previous attempt failed.
+ * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
+ * case, but I left it here because it shouldn't trigger for
+ * sane PHYs anyway.
+ */
+ if (unlikely(dev->reset_failed))
+ emac_reinitialize(dev);
+
+ link_poll_interval = PHY_POLL_LINK_OFF;
+ }
+ mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+}
+
+/* BHs disabled */
+static void emac_force_link_update(struct ocp_enet_private *dev)
+{
+ netif_carrier_off(dev->ndev);
+ if (timer_pending(&dev->link_timer))
+ mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_close(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ DBG("%d: close" NL, dev->def->index);
+
+ local_bh_disable();
+
+ if (dev->phy.address >= 0)
+ del_timer_sync(&dev->link_timer);
+
+ netif_stop_queue(ndev);
+ emac_rx_disable(dev);
+ emac_tx_disable(dev);
+ mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ mal_poll_del(dev->mal, &dev->commac);
+ local_bh_enable();
+
+ emac_clean_tx_ring(dev);
+ emac_clean_rx_ring(dev);
+ free_irq(dev->def->irq, dev);
+
+ return 0;
+}
+
+static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
+ struct sk_buff *skb)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+ if (skb->ip_summed == CHECKSUM_HW) {
+ ++dev->stats.tx_packets_csum;
+ return EMAC_TX_CTRL_TAH_CSUM;
+ }
+#endif
+ return 0;
+}
+
+static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
+{
+ struct emac_regs *p = dev->emacp;
+ struct net_device *ndev = dev->ndev;
+
+ /* Send the packet out */
+ out_be32(&p->tmr0, EMAC_TMR0_XMIT);
+
+ if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
+ netif_stop_queue(ndev);
+ DBG2("%d: stopped TX queue" NL, dev->def->index);
+ }
+
+ ndev->trans_start = jiffies;
+ ++dev->stats.tx_packets;
+ dev->stats.tx_bytes += len;
+
+ return 0;
+}
+
+/* BHs disabled */
+static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ unsigned int len = skb->len;
+ int slot;
+
+ u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+ MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
+
+ slot = dev->tx_slot++;
+ if (dev->tx_slot == NUM_TX_BUFF) {
+ dev->tx_slot = 0;
+ ctrl |= MAL_TX_CTRL_WRAP;
+ }
+
+ DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
+
+ dev->tx_skb[slot] = skb;
+ dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
+ DMA_TO_DEVICE);
+ dev->tx_desc[slot].data_len = (u16) len;
+ barrier();
+ dev->tx_desc[slot].ctrl = ctrl;
+
+ return emac_xmit_finish(dev, len);
+}
+
+#if defined(CONFIG_IBM_EMAC_TAH)
+static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
+ u32 pd, int len, int last, u16 base_ctrl)
+{
+ while (1) {
+ u16 ctrl = base_ctrl;
+ int chunk = min(len, MAL_MAX_TX_SIZE);
+ len -= chunk;
+
+ slot = (slot + 1) % NUM_TX_BUFF;
+
+ if (last && !len)
+ ctrl |= MAL_TX_CTRL_LAST;
+ if (slot == NUM_TX_BUFF - 1)
+ ctrl |= MAL_TX_CTRL_WRAP;
+
+ dev->tx_skb[slot] = NULL;
+ dev->tx_desc[slot].data_ptr = pd;
+ dev->tx_desc[slot].data_len = (u16) chunk;
+ dev->tx_desc[slot].ctrl = ctrl;
+ ++dev->tx_cnt;
+
+ if (!len)
+ break;
+
+ pd += chunk;
+ }
+ return slot;
+}
+
+/* BHs disabled (SG version for TAH equipped EMACs) */
+static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ int len = skb->len, chunk;
+ int slot, i;
+ u16 ctrl;
+ u32 pd;
+
+ /* This is common "fast" path */
+ if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
+ return emac_start_xmit(skb, ndev);
+
+ len -= skb->data_len;
+
+ /* Note, this is only an *estimation*, we can still run out of empty
+ * slots because of the additional fragmentation into
+ * MAL_MAX_TX_SIZE-sized chunks
+ */
+ if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
+ goto stop_queue;
+
+ ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+ emac_tx_csum(dev, skb);
+ slot = dev->tx_slot;
+
+ /* skb data */
+ dev->tx_skb[slot] = NULL;
+ chunk = min(len, MAL_MAX_TX_SIZE);
+ dev->tx_desc[slot].data_ptr = pd =
+ dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
+ dev->tx_desc[slot].data_len = (u16) chunk;
+ len -= chunk;
+ if (unlikely(len))
+ slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
+ ctrl);
+ /* skb fragments */
+ for (i = 0; i < nr_frags; ++i) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ len = frag->size;
+
+ if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
+ goto undo_frame;
+
+ pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
+ DMA_TO_DEVICE);
+
+ slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
+ ctrl);
+ }
+
+ DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
+ dev->tx_slot, slot);
+
+ /* Attach skb to the last slot so we don't release it too early */
+ dev->tx_skb[slot] = skb;
+
+ /* Send the packet out */
+ if (dev->tx_slot == NUM_TX_BUFF - 1)
+ ctrl |= MAL_TX_CTRL_WRAP;
+ barrier();
+ dev->tx_desc[dev->tx_slot].ctrl = ctrl;
+ dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
+
+ return emac_xmit_finish(dev, skb->len);
+
+ undo_frame:
+ /* Well, too bad. Our previous estimation was overly optimistic.
+ * Undo everything.
+ */
+ while (slot != dev->tx_slot) {
+ dev->tx_desc[slot].ctrl = 0;
+ --dev->tx_cnt;
+ if (--slot < 0)
+ slot = NUM_TX_BUFF - 1;
+ }
+ ++dev->estats.tx_undo;
+
+ stop_queue:
+ netif_stop_queue(ndev);
+ DBG2("%d: stopped TX queue" NL, dev->def->index);
+ return 1;
+}
+#else
+# define emac_start_xmit_sg emac_start_xmit
+#endif /* !defined(CONFIG_IBM_EMAC_TAH) */
+
+/* BHs disabled */
+static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
+{
+ struct ibm_emac_error_stats *st = &dev->estats;
+ DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
+
+ ++st->tx_bd_errors;
+ if (ctrl & EMAC_TX_ST_BFCS)
+ ++st->tx_bd_bad_fcs;
+ if (ctrl & EMAC_TX_ST_LCS)
+ ++st->tx_bd_carrier_loss;
+ if (ctrl & EMAC_TX_ST_ED)
+ ++st->tx_bd_excessive_deferral;
+ if (ctrl & EMAC_TX_ST_EC)
+ ++st->tx_bd_excessive_collisions;
+ if (ctrl & EMAC_TX_ST_LC)
+ ++st->tx_bd_late_collision;
+ if (ctrl & EMAC_TX_ST_MC)
+ ++st->tx_bd_multple_collisions;
+ if (ctrl & EMAC_TX_ST_SC)
+ ++st->tx_bd_single_collision;
+ if (ctrl & EMAC_TX_ST_UR)
+ ++st->tx_bd_underrun;
+ if (ctrl & EMAC_TX_ST_SQE)
+ ++st->tx_bd_sqe;
+}
+
+static void emac_poll_tx(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
+ dev->ack_slot);
+
+ if (dev->tx_cnt) {
+ u16 ctrl;
+ int slot = dev->ack_slot, n = 0;
+ again:
+ ctrl = dev->tx_desc[slot].ctrl;
+ if (!(ctrl & MAL_TX_CTRL_READY)) {
+ struct sk_buff *skb = dev->tx_skb[slot];
+ ++n;
+
+ if (skb) {
+ dev_kfree_skb(skb);
+ dev->tx_skb[slot] = NULL;
+ }
+ slot = (slot + 1) % NUM_TX_BUFF;
+
+ if (unlikely(EMAC_IS_BAD_TX(ctrl)))
+ emac_parse_tx_error(dev, ctrl);
+
+ if (--dev->tx_cnt)
+ goto again;
+ }
+ if (n) {
+ dev->ack_slot = slot;
+ if (netif_queue_stopped(dev->ndev) &&
+ dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
+ netif_wake_queue(dev->ndev);
+
+ DBG2("%d: tx %d pkts" NL, dev->def->index, n);
+ }
+ }
+}
+
+static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
+ int len)
+{
+ struct sk_buff *skb = dev->rx_skb[slot];
+ DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
+
+ if (len)
+ dma_map_single(dev->ldev, skb->data - 2,
+ EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
+
+ dev->rx_desc[slot].data_len = 0;
+ barrier();
+ dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+ (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+}
+
+static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
+{
+ struct ibm_emac_error_stats *st = &dev->estats;
+ DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
+
+ ++st->rx_bd_errors;
+ if (ctrl & EMAC_RX_ST_OE)
+ ++st->rx_bd_overrun;
+ if (ctrl & EMAC_RX_ST_BP)
+ ++st->rx_bd_bad_packet;
+ if (ctrl & EMAC_RX_ST_RP)
+ ++st->rx_bd_runt_packet;
+ if (ctrl & EMAC_RX_ST_SE)
+ ++st->rx_bd_short_event;
+ if (ctrl & EMAC_RX_ST_AE)
+ ++st->rx_bd_alignment_error;
+ if (ctrl & EMAC_RX_ST_BFCS)
+ ++st->rx_bd_bad_fcs;
+ if (ctrl & EMAC_RX_ST_PTL)
+ ++st->rx_bd_packet_too_long;
+ if (ctrl & EMAC_RX_ST_ORE)
+ ++st->rx_bd_out_of_range;
+ if (ctrl & EMAC_RX_ST_IRE)
+ ++st->rx_bd_in_range;
+}
+
+static inline void emac_rx_csum(struct ocp_enet_private *dev,
+ struct sk_buff *skb, u16 ctrl)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+ if (!ctrl && dev->tah_dev) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ ++dev->stats.rx_packets_csum;
+ }
+#endif
+}
+
+static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
+{
+ if (likely(dev->rx_sg_skb != NULL)) {
+ int len = dev->rx_desc[slot].data_len;
+ int tot_len = dev->rx_sg_skb->len + len;
+
+ if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
+ ++dev->estats.rx_dropped_mtu;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ } else {
+ cacheable_memcpy(dev->rx_sg_skb->tail,
+ dev->rx_skb[slot]->data, len);
+ skb_put(dev->rx_sg_skb, len);
+ emac_recycle_rx_skb(dev, slot, len);
+ return 0;
+ }
+ }
+ emac_recycle_rx_skb(dev, slot, 0);
+ return -1;
+}
+
+/* BHs disabled */
+static int emac_poll_rx(void *param, int budget)
+{
+ struct ocp_enet_private *dev = param;
+ int slot = dev->rx_slot, received = 0;
+
+ DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
+
+ again:
+ while (budget > 0) {
+ int len;
+ struct sk_buff *skb;
+ u16 ctrl = dev->rx_desc[slot].ctrl;
+
+ if (ctrl & MAL_RX_CTRL_EMPTY)
+ break;
+
+ skb = dev->rx_skb[slot];
+ barrier();
+ len = dev->rx_desc[slot].data_len;
+
+ if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
+ goto sg;
+
+ ctrl &= EMAC_BAD_RX_MASK;
+ if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+ emac_parse_rx_error(dev, ctrl);
+ ++dev->estats.rx_dropped_error;
+ emac_recycle_rx_skb(dev, slot, 0);
+ len = 0;
+ goto next;
+ }
+
+ if (len && len < EMAC_RX_COPY_THRESH) {
+ struct sk_buff *copy_skb =
+ alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
+ if (unlikely(!copy_skb))
+ goto oom;
+
+ skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
+ cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
+ len + 2);
+ emac_recycle_rx_skb(dev, slot, len);
+ skb = copy_skb;
+ } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
+ goto oom;
+
+ skb_put(skb, len);
+ push_packet:
+ skb->dev = dev->ndev;
+ skb->protocol = eth_type_trans(skb, dev->ndev);
+ emac_rx_csum(dev, skb, ctrl);
+
+ if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
+ ++dev->estats.rx_dropped_stack;
+ next:
+ ++dev->stats.rx_packets;
+ skip:
+ dev->stats.rx_bytes += len;
+ slot = (slot + 1) % NUM_RX_BUFF;
+ --budget;
+ ++received;
+ continue;
+ sg:
+ if (ctrl & MAL_RX_CTRL_FIRST) {
+ BUG_ON(dev->rx_sg_skb);
+ if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
+ DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+ ++dev->estats.rx_dropped_oom;
+ emac_recycle_rx_skb(dev, slot, 0);
+ } else {
+ dev->rx_sg_skb = skb;
+ skb_put(skb, len);
+ }
+ } else if (!emac_rx_sg_append(dev, slot) &&
+ (ctrl & MAL_RX_CTRL_LAST)) {
+
+ skb = dev->rx_sg_skb;
+ dev->rx_sg_skb = NULL;
+
+ ctrl &= EMAC_BAD_RX_MASK;
+ if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+ emac_parse_rx_error(dev, ctrl);
+ ++dev->estats.rx_dropped_error;
+ dev_kfree_skb(skb);
+ len = 0;
+ } else
+ goto push_packet;
+ }
+ goto skip;
+ oom:
+ DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+ /* Drop the packet and recycle skb */
+ ++dev->estats.rx_dropped_oom;
+ emac_recycle_rx_skb(dev, slot, 0);
+ goto next;
+ }
+
+ if (received) {
+ DBG2("%d: rx %d BDs" NL, dev->def->index, received);
+ dev->rx_slot = slot;
+ }
+
+ if (unlikely(budget && dev->commac.rx_stopped)) {
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ barrier();
+ if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
+ DBG2("%d: rx restart" NL, dev->def->index);
+ received = 0;
+ goto again;
+ }
+
+ if (dev->rx_sg_skb) {
+ DBG2("%d: dropping partial rx packet" NL,
+ dev->def->index);
+ ++dev->estats.rx_dropped_error;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ }
+
+ dev->commac.rx_stopped = 0;
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_rx_enable(dev);
+ dev->rx_slot = 0;
+ }
+ return received;
+}
+
+/* BHs disabled */
+static int emac_peek_rx(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
+}
+
+/* BHs disabled */
+static int emac_peek_rx_sg(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ int slot = dev->rx_slot;
+ while (1) {
+ u16 ctrl = dev->rx_desc[slot].ctrl;
+ if (ctrl & MAL_RX_CTRL_EMPTY)
+ return 0;
+ else if (ctrl & MAL_RX_CTRL_LAST)
+ return 1;
+
+ slot = (slot + 1) % NUM_RX_BUFF;
+
+ /* I'm just being paranoid here :) */
+ if (unlikely(slot == dev->rx_slot))
+ return 0;
+ }
+}
+
+/* Hard IRQ */
+static void emac_rxde(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ ++dev->estats.rx_stopped;
+ emac_rx_disable_async(dev);
+}
+
+/* Hard IRQ */
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ocp_enet_private *dev = dev_instance;
+ struct emac_regs *p = dev->emacp;
+ struct ibm_emac_error_stats *st = &dev->estats;
+
+ u32 isr = in_be32(&p->isr);
+ out_be32(&p->isr, isr);
+
+ DBG("%d: isr = %08x" NL, dev->def->index, isr);
+
+ if (isr & EMAC_ISR_TXPE)
+ ++st->tx_parity;
+ if (isr & EMAC_ISR_RXPE)
+ ++st->rx_parity;
+ if (isr & EMAC_ISR_TXUE)
+ ++st->tx_underrun;
+ if (isr & EMAC_ISR_RXOE)
+ ++st->rx_fifo_overrun;
+ if (isr & EMAC_ISR_OVR)
+ ++st->rx_overrun;
+ if (isr & EMAC_ISR_BP)
+ ++st->rx_bad_packet;
+ if (isr & EMAC_ISR_RP)
+ ++st->rx_runt_packet;
+ if (isr & EMAC_ISR_SE)
+ ++st->rx_short_event;
+ if (isr & EMAC_ISR_ALE)
+ ++st->rx_alignment_error;
+ if (isr & EMAC_ISR_BFCS)
+ ++st->rx_bad_fcs;
+ if (isr & EMAC_ISR_PTLE)
+ ++st->rx_packet_too_long;
+ if (isr & EMAC_ISR_ORE)
+ ++st->rx_out_of_range;
+ if (isr & EMAC_ISR_IRE)
+ ++st->rx_in_range;
+ if (isr & EMAC_ISR_SQE)
+ ++st->tx_sqe;
+ if (isr & EMAC_ISR_TE)
+ ++st->tx_errors;
return IRQ_HANDLED;
}
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static struct net_device_stats *emac_stats(struct net_device *ndev)
{
- unsigned short ctrl;
- unsigned long flags;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- int len = skb->len;
- unsigned int offset = 0, size, f, tx_slot_first;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ibm_emac_stats *st = &dev->stats;
+ struct ibm_emac_error_stats *est = &dev->estats;
+ struct net_device_stats *nst = &dev->nstats;
- spin_lock_irqsave(&fep->lock, flags);
+ DBG2("%d: stats" NL, dev->def->index);
- len -= skb->data_len;
+ /* Compute "legacy" statistics */
+ local_irq_disable();
+ nst->rx_packets = (unsigned long)st->rx_packets;
+ nst->rx_bytes = (unsigned long)st->rx_bytes;
+ nst->tx_packets = (unsigned long)st->tx_packets;
+ nst->tx_bytes = (unsigned long)st->tx_bytes;
+ nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
+ est->rx_dropped_error +
+ est->rx_dropped_resize +
+ est->rx_dropped_mtu);
+ nst->tx_dropped = (unsigned long)est->tx_dropped;
- if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
- PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
- netif_stop_queue(dev);
- spin_unlock_irqrestore(&fep->lock, flags);
- return -EBUSY;
- }
+ nst->rx_errors = (unsigned long)est->rx_bd_errors;
+ nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
+ est->rx_fifo_overrun +
+ est->rx_overrun);
+ nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
+ est->rx_alignment_error);
+ nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
+ est->rx_bad_fcs);
+ nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
+ est->rx_bd_short_event +
+ est->rx_bd_packet_too_long +
+ est->rx_bd_out_of_range +
+ est->rx_bd_in_range +
+ est->rx_runt_packet +
+ est->rx_short_event +
+ est->rx_packet_too_long +
+ est->rx_out_of_range +
+ est->rx_in_range);
- tx_slot_first = fep->tx_slot;
-
- while (len) {
- size = min(len, DESC_BUF_SIZE);
-
- fep->tx_desc[fep->tx_slot].data_len = (short)size;
- fep->tx_desc[fep->tx_slot].data_ptr =
- (unsigned char *)dma_map_single(&fep->ocpdev->dev,
- (void *)((unsigned int)skb->
- data + offset),
- size, DMA_TO_DEVICE);
-
- ctrl = EMAC_TX_CTRL_DFLT;
- if (fep->tx_slot != tx_slot_first)
- ctrl |= MAL_TX_CTRL_READY;
- if ((NUM_TX_BUFF - 1) == fep->tx_slot)
- ctrl |= MAL_TX_CTRL_WRAP;
- if (!nr_frags && (len == size)) {
- ctrl |= MAL_TX_CTRL_LAST;
- fep->tx_skb[fep->tx_slot] = skb;
- }
- if (skb->ip_summed == CHECKSUM_HW)
- ctrl |= EMAC_TX_CTRL_TAH_CSUM;
-
- fep->tx_desc[fep->tx_slot].ctrl = ctrl;
-
- len -= size;
- offset += size;
-
- /* Bump tx count */
- if (++fep->tx_cnt == NUM_TX_BUFF)
- netif_stop_queue(dev);
-
- /* Next descriptor */
- if (++fep->tx_slot == NUM_TX_BUFF)
- fep->tx_slot = 0;
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
- offset = 0;
-
- while (len) {
- size = min(len, DESC_BUF_SIZE);
-
- dma_map_page(&fep->ocpdev->dev,
- frag->page,
- frag->page_offset + offset,
- size, DMA_TO_DEVICE);
-
- ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
- if ((NUM_TX_BUFF - 1) == fep->tx_slot)
- ctrl |= MAL_TX_CTRL_WRAP;
- if ((f == (nr_frags - 1)) && (len == size)) {
- ctrl |= MAL_TX_CTRL_LAST;
- fep->tx_skb[fep->tx_slot] = skb;
- }
-
- if (skb->ip_summed == CHECKSUM_HW)
- ctrl |= EMAC_TX_CTRL_TAH_CSUM;
-
- fep->tx_desc[fep->tx_slot].data_len = (short)size;
- fep->tx_desc[fep->tx_slot].data_ptr =
- (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
- frag->page_offset + offset);
- fep->tx_desc[fep->tx_slot].ctrl = ctrl;
-
- len -= size;
- offset += size;
-
- /* Bump tx count */
- if (++fep->tx_cnt == NUM_TX_BUFF)
- netif_stop_queue(dev);
-
- /* Next descriptor */
- if (++fep->tx_slot == NUM_TX_BUFF)
- fep->tx_slot = 0;
- }
- }
-
- /*
- * Deferred set READY on first descriptor of packet to
- * avoid TX MAL race.
- */
- fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
-
- /* Send the packet out. */
- out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
-
- fep->stats.tx_packets++;
- fep->stats.tx_bytes += skb->len;
-
- PKT_DEBUG(("emac_start_xmit() exitn"));
-
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return 0;
+ nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
+ nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
+ est->tx_underrun);
+ nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
+ nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
+ est->tx_bd_excessive_collisions +
+ est->tx_bd_late_collision +
+ est->tx_bd_multple_collisions);
+ local_irq_enable();
+ return nst;
}
-static int emac_adjust_to_link(struct ocp_enet_private *fep)
+static void emac_remove(struct ocp_device *ocpdev)
{
- emac_t *emacp = fep->emacp;
- unsigned long mode_reg;
- int full_duplex, speed;
+ struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
- full_duplex = 0;
- speed = SPEED_10;
+ DBG("%d: remove" NL, dev->def->index);
- /* set mode register 1 defaults */
- mode_reg = EMAC_M1_DEFAULT;
+ ocp_set_drvdata(ocpdev, 0);
+ unregister_netdev(dev->ndev);
- /* Read link mode on PHY */
- if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
- /* If an error occurred, we don't deal with it yet */
- full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
- speed = fep->phy_mii.speed;
- }
+ tah_fini(dev->tah_dev);
+ rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+ zmii_fini(dev->zmii_dev, dev->zmii_input);
+ emac_dbg_register(dev->def->index, 0);
- /* set speed (default is 10Mb) */
- switch (speed) {
- case SPEED_1000:
- mode_reg |= EMAC_M1_RFS_16K;
- if (fep->rgmii_dev) {
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev);
-
- if ((rgmii->mode[fep->rgmii_input] == RTBI)
- || (rgmii->mode[fep->rgmii_input] == TBI))
- mode_reg |= EMAC_M1_MF_1000GPCS;
- else
- mode_reg |= EMAC_M1_MF_1000MBPS;
-
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 1000);
- }
- break;
- case SPEED_100:
- mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
- if (fep->rgmii_dev)
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 100);
- if (fep->zmii_dev)
- emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
- 100);
- break;
- case SPEED_10:
- default:
- mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
- if (fep->rgmii_dev)
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 10);
- if (fep->zmii_dev)
- emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
- 10);
- }
-
- if (full_duplex)
- mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
- else
- mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
-
- LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
- fep->ndev->name, speed, full_duplex, fep->opened));
-
- printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
- fep->ndev->name, speed, full_duplex ? "Full" : "Half");
- if (fep->opened)
- out_be32(&emacp->em0mr1, mode_reg);
-
- return 0;
+ mal_unregister_commac(dev->mal, &dev->commac);
+ iounmap((void *)dev->emacp);
+ kfree(dev->ndev);
}
-static int emac_set_mac_address(struct net_device *ndev, void *p)
+static struct mal_commac_ops emac_commac_ops = {
+ .poll_tx = &emac_poll_tx,
+ .poll_rx = &emac_poll_rx,
+ .peek_rx = &emac_peek_rx,
+ .rxde = &emac_rxde,
+};
+
+static struct mal_commac_ops emac_commac_sg_ops = {
+ .poll_tx = &emac_poll_tx,
+ .poll_rx = &emac_poll_rx,
+ .peek_rx = &emac_peek_rx_sg,
+ .rxde = &emac_rxde,
+};
+
+/* Ethtool support */
+static int emac_ethtool_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
{
- struct ocp_enet_private *fep = ndev->priv;
- emac_t *emacp = fep->emacp;
- struct sockaddr *addr = p;
+ struct ocp_enet_private *dev = ndev->priv;
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
-
- /* set the high address */
- out_be32(&emacp->em0iahr,
- (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
-
- /* set the low address */
- out_be32(&emacp->em0ialr,
- (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
- | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
-
- return 0;
-}
-
-static int emac_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ocp_enet_private *fep = dev->priv;
- int old_mtu = dev->mtu;
- unsigned long mode_reg;
- emac_t *emacp = fep->emacp;
- u32 em0mr0;
- int i, full;
- unsigned long flags;
-
- if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
- printk(KERN_ERR
- "emac: Invalid MTU setting, MTU must be between %d and %d\n",
- EMAC_MIN_MTU, EMAC_MAX_MTU);
- return -EINVAL;
- }
-
- if (old_mtu != new_mtu && netif_running(dev)) {
- /* Stop rx engine */
- em0mr0 = in_be32(&emacp->em0mr0);
- out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
-
- /* Wait for descriptors to be empty */
- do {
- full = 0;
- for (i = 0; i < NUM_RX_BUFF; i++)
- if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
- printk(KERN_NOTICE
- "emac: RX ring is still full\n");
- full = 1;
- }
- } while (full);
-
- spin_lock_irqsave(&fep->lock, flags);
-
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /* Destroy all old rx skbs */
- for (i = 0; i < NUM_RX_BUFF; i++) {
- dma_unmap_single(&fep->ocpdev->dev,
- fep->rx_desc[i].data_ptr,
- fep->rx_desc[i].data_len,
- DMA_FROM_DEVICE);
- dev_kfree_skb(fep->rx_skb[i]);
- fep->rx_skb[i] = NULL;
- }
-
- /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */
- mode_reg = in_be32(&emacp->em0mr1);
- if (new_mtu > ENET_DEF_MTU_SIZE) {
- mode_reg |= EMAC_M1_JUMBO_ENABLE;
- fep->rx_buffer_size = EMAC_MAX_FRAME;
- } else {
- mode_reg &= ~EMAC_M1_JUMBO_ENABLE;
- fep->rx_buffer_size = ENET_DEF_BUF_SIZE;
- }
- dev->mtu = new_mtu;
- out_be32(&emacp->em0mr1, mode_reg);
-
- /* Re-init rx skbs */
- fep->rx_slot = 0;
- emac_rx_fill(dev, 0);
-
- /* Restart the rx engine */
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
-
- spin_unlock_irqrestore(&fep->lock, flags);
- }
-
- return 0;
-}
-
-static void __emac_set_multicast_list(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- u32 rmr = in_be32(&emacp->em0rmr);
-
- /* First clear all special bits, they can be set later */
- rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
-
- if (dev->flags & IFF_PROMISC) {
- rmr |= EMAC_RMR_PME;
- } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
- /*
- * Must be setting up to use multicast
- * Now check for promiscuous multicast
- */
- rmr |= EMAC_RMR_PMME;
- } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
- unsigned short em0gaht[4] = { 0, 0, 0, 0 };
- struct dev_mc_list *dmi;
-
- /* Need to hash on the multicast address. */
- for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
- unsigned long mc_crc;
- unsigned int bit_number;
-
- mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
- bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */
- em0gaht[bit_number >> 4] |=
- 0x8000 >> (bit_number & 0x0f);
- }
- emacp->em0gaht1 = em0gaht[0];
- emacp->em0gaht2 = em0gaht[1];
- emacp->em0gaht3 = em0gaht[2];
- emacp->em0gaht4 = em0gaht[3];
-
- /* Turn on multicast addressing */
- rmr |= EMAC_RMR_MAE;
- }
- out_be32(&emacp->em0rmr, rmr);
-}
-
-static int emac_init_tah(struct ocp_enet_private *fep)
-{
- tah_t *tahp;
-
- /* Initialize TAH and enable checksum verification */
- tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
-
- if (tahp == NULL) {
- printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
- fep->tah_dev->def->index);
-
- return -ENOMEM;
- }
-
- out_be32(&tahp->tah_mr, TAH_MR_SR);
-
- /* wait for reset to complete */
- while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
-
- /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
- out_be32(&tahp->tah_mr,
- TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
- TAH_MR_DIG);
-
- iounmap(tahp);
-
- return 0;
-}
-
-static void emac_init_rings(struct net_device *dev)
-{
- struct ocp_enet_private *ep = dev->priv;
- int loop;
-
- ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
- (ep->mal_tx_chan *
- MAL_DT_ALIGN));
- ep->rx_desc =
- (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
- (ep->mal_rx_chan * MAL_DT_ALIGN));
-
- /* Fill in the transmit descriptor ring. */
- for (loop = 0; loop < NUM_TX_BUFF; loop++) {
- if (ep->tx_skb[loop]) {
- dma_unmap_single(&ep->ocpdev->dev,
- ep->tx_desc[loop].data_ptr,
- ep->tx_desc[loop].data_len,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(ep->tx_skb[loop]);
- }
- ep->tx_skb[loop] = NULL;
- ep->tx_desc[loop].ctrl = 0;
- ep->tx_desc[loop].data_len = 0;
- ep->tx_desc[loop].data_ptr = NULL;
- }
- ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
-
- /* Format the receive descriptor ring. */
- ep->rx_slot = 0;
- /* Default is MTU=1500 + Ethernet overhead */
- ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
- emac_rx_fill(dev, 0);
- if (ep->rx_slot != 0) {
- printk(KERN_ERR
- "%s: Not enough mem for RxChain durning Open?\n",
- dev->name);
- /*We couldn't fill the ring at startup?
- *We could clean up and fail to open but right now we will try to
- *carry on. It may be a sign of a bad NUM_RX_BUFF value
- */
- }
-
- ep->tx_cnt = 0;
- ep->tx_slot = 0;
- ep->ack_slot = 0;
-}
-
-static void emac_reset_configure(struct ocp_enet_private *fep)
-{
- emac_t *emacp = fep->emacp;
- int i;
-
- mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /*
- * Check for a link, some PHYs don't provide a clock if
- * no link is present. Some EMACs will not come out of
- * soft reset without a PHY clock present.
- */
- if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
- /* Reset the EMAC */
- out_be32(&emacp->em0mr0, EMAC_M0_SRST);
- udelay(20);
- for (i = 0; i < 100; i++) {
- if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
- break;
- udelay(10);
- }
-
- if (i >= 100) {
- printk(KERN_ERR "%s: Cannot reset EMAC\n",
- fep->ndev->name);
- return;
- }
- }
-
- /* Switch IRQs off for now */
- out_be32(&emacp->em0iser, 0);
-
- /* Configure MAL rx channel */
- mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
-
- /* set the high address */
- out_be32(&emacp->em0iahr,
- (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
-
- /* set the low address */
- out_be32(&emacp->em0ialr,
- (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
- | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
-
- /* Adjust to link */
- if (netif_carrier_ok(fep->ndev))
- emac_adjust_to_link(fep);
-
- /* enable broadcast/individual address and RX FIFO defaults */
- out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
-
- /* set transmit request threshold register */
- out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
-
- /* Reconfigure multicast */
- __emac_set_multicast_list(fep->ndev);
-
- /* Set receiver/transmitter defaults */
- out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
- out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
- out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
-
- /* set frame gap */
- out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
-
- /* set VLAN Tag Protocol Identifier */
- out_be32(&emacp->em0vtpid, 0x8100);
-
- /* Init ring buffers */
- emac_init_rings(fep->ndev);
-}
-
-static void emac_kick(struct ocp_enet_private *fep)
-{
- emac_t *emacp = fep->emacp;
- unsigned long emac_ier;
-
- emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
- EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
- EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
-
- out_be32(&emacp->em0iser, emac_ier);
-
- /* enable all MAL transmit and receive channels */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /* set transmit and receive enable */
- out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
-}
-
-static void
-emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
-{
- u32 advertise;
- int autoneg;
- int forced_speed;
- int forced_duplex;
-
- /* Default advertise */
- advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
- autoneg = fep->want_autoneg;
- forced_speed = fep->phy_mii.speed;
- forced_duplex = fep->phy_mii.duplex;
-
- /* Setup link parameters */
- if (ep) {
- if (ep->autoneg == AUTONEG_ENABLE) {
- advertise = ep->advertising;
- autoneg = 1;
- } else {
- autoneg = 0;
- forced_speed = ep->speed;
- forced_duplex = ep->duplex;
- }
- }
-
- /* Configure PHY & start aneg */
- fep->want_autoneg = autoneg;
- if (autoneg) {
- LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
- fep->ndev->name, advertise));
- fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
- } else {
- LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
- fep->ndev->name, forced_speed, forced_duplex));
- fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
- forced_duplex);
- }
- fep->timer_ticks = 0;
- mod_timer(&fep->link_timer, jiffies + HZ);
-}
-
-static void emac_link_timer(unsigned long data)
-{
- struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
- int link;
-
- if (fep->going_away)
- return;
-
- spin_lock_irq(&fep->lock);
-
- link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
- LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
-
- if (link == netif_carrier_ok(fep->ndev)) {
- if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
- emac_start_link(fep, NULL);
- goto out;
- }
- printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
- link ? "Up" : "Down");
- if (link) {
- netif_carrier_on(fep->ndev);
- /* Chip needs a full reset on config change. That sucks, so I
- * should ultimately move that to some tasklet to limit
- * latency peaks caused by this code
- */
- emac_reset_configure(fep);
- if (fep->opened)
- emac_kick(fep);
- } else {
- fep->timer_ticks = 0;
- netif_carrier_off(fep->ndev);
- }
- out:
- mod_timer(&fep->link_timer, jiffies + HZ);
- spin_unlock_irq(&fep->lock);
-}
-
-static void emac_set_multicast_list(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
-
- spin_lock_irq(&fep->lock);
- __emac_set_multicast_list(dev);
- spin_unlock_irq(&fep->lock);
-}
-
-static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
-{
- struct ocp_enet_private *fep = ndev->priv;
-
- cmd->supported = fep->phy_mii.def->features;
+ cmd->supported = dev->phy.features;
cmd->port = PORT_MII;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->phy_address = fep->mii_phy_addr;
- spin_lock_irq(&fep->lock);
- cmd->autoneg = fep->want_autoneg;
- cmd->speed = fep->phy_mii.speed;
- cmd->duplex = fep->phy_mii.duplex;
- spin_unlock_irq(&fep->lock);
+ cmd->phy_address = dev->phy.address;
+ cmd->transceiver =
+ dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
+
+ local_bh_disable();
+ cmd->advertising = dev->phy.advertising;
+ cmd->autoneg = dev->phy.autoneg;
+ cmd->speed = dev->phy.speed;
+ cmd->duplex = dev->phy.duplex;
+ local_bh_enable();
+
return 0;
}
-static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+static int emac_ethtool_set_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
{
- struct ocp_enet_private *fep = ndev->priv;
- unsigned long features = fep->phy_mii.def->features;
+ struct ocp_enet_private *dev = ndev->priv;
+ u32 f = dev->phy.features;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
+ cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
+ /* Basic sanity checks */
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
return -EINVAL;
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
return -EINVAL;
- if (cmd->autoneg == AUTONEG_DISABLE)
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
switch (cmd->speed) {
case SPEED_10:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_10baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_10baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_10baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_10baseT_Full))
return -EINVAL;
break;
case SPEED_100:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_100baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_100baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_100baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_100baseT_Full))
return -EINVAL;
break;
case SPEED_1000:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_1000baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_1000baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_1000baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_1000baseT_Full))
return -EINVAL;
break;
default:
return -EINVAL;
- } else if ((features & SUPPORTED_Autoneg) == 0)
- return -EINVAL;
- spin_lock_irq(&fep->lock);
- emac_start_link(fep, cmd);
- spin_unlock_irq(&fep->lock);
+ }
+
+ local_bh_disable();
+ dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
+ cmd->duplex);
+
+ } else {
+ if (!(f & SUPPORTED_Autoneg))
+ return -EINVAL;
+
+ local_bh_disable();
+ dev->phy.def->ops->setup_aneg(&dev->phy,
+ (cmd->advertising & f) |
+ (dev->phy.advertising &
+ (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause)));
+ }
+ emac_force_link_update(dev);
+ local_bh_enable();
+
return 0;
}
-static void
-emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
+static void emac_ethtool_get_ringparam(struct net_device *ndev,
+ struct ethtool_ringparam *rp)
{
- struct ocp_enet_private *fep = ndev->priv;
+ rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
+ rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
+}
- strcpy(info->driver, DRV_NAME);
+static void emac_ethtool_get_pauseparam(struct net_device *ndev,
+ struct ethtool_pauseparam *pp)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ local_bh_disable();
+ if ((dev->phy.features & SUPPORTED_Autoneg) &&
+ (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
+ pp->autoneg = 1;
+
+ if (dev->phy.duplex == DUPLEX_FULL) {
+ if (dev->phy.pause)
+ pp->rx_pause = pp->tx_pause = 1;
+ else if (dev->phy.asym_pause)
+ pp->tx_pause = 1;
+ }
+ local_bh_enable();
+}
+
+static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ return dev->tah_dev != 0;
+}
+
+static int emac_get_regs_len(struct ocp_enet_private *dev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
+}
+
+static int emac_ethtool_get_regs_len(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ return sizeof(struct emac_ethtool_regs_hdr) +
+ emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
+ zmii_get_regs_len(dev->zmii_dev) +
+ rgmii_get_regs_len(dev->rgmii_dev) +
+ tah_get_regs_len(dev->tah_dev);
+}
+
+static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
+{
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+
+ hdr->version = EMAC_ETHTOOL_REGS_VER;
+ hdr->index = dev->def->index;
+ memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
+ return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
+}
+
+static void emac_ethtool_get_regs(struct net_device *ndev,
+ struct ethtool_regs *regs, void *buf)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct emac_ethtool_regs_hdr *hdr = buf;
+
+ hdr->components = 0;
+ buf = hdr + 1;
+
+ local_irq_disable();
+ buf = mal_dump_regs(dev->mal, buf);
+ buf = emac_dump_regs(dev, buf);
+ if (dev->zmii_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
+ buf = zmii_dump_regs(dev->zmii_dev, buf);
+ }
+ if (dev->rgmii_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
+ buf = rgmii_dump_regs(dev->rgmii_dev, buf);
+ }
+ if (dev->tah_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_TAH;
+ buf = tah_dump_regs(dev->tah_dev, buf);
+ }
+ local_irq_enable();
+}
+
+static int emac_ethtool_nway_reset(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int res = 0;
+
+ DBG("%d: nway_reset" NL, dev->def->index);
+
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
+
+ local_bh_disable();
+ if (!dev->phy.autoneg) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
+ emac_force_link_update(dev);
+
+ out:
+ local_bh_enable();
+ return res;
+}
+
+static int emac_ethtool_get_stats_count(struct net_device *ndev)
+{
+ return EMAC_ETHTOOL_STATS_COUNT;
+}
+
+static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
+ u8 * buf)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
+}
+
+static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
+ struct ethtool_stats *estats,
+ u64 * tmp_stats)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ local_irq_disable();
+ memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
+ tmp_stats += sizeof(dev->stats) / sizeof(u64);
+ memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
+ local_irq_enable();
+}
+
+static void emac_ethtool_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ strcpy(info->driver, "ibm_emac");
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
- sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
- info->regdump_len = 0;
-}
-
-static int emac_nway_reset(struct net_device *ndev)
-{
- struct ocp_enet_private *fep = ndev->priv;
-
- if (!fep->want_autoneg)
- return -EINVAL;
- spin_lock_irq(&fep->lock);
- emac_start_link(fep, NULL);
- spin_unlock_irq(&fep->lock);
- return 0;
-}
-
-static u32 emac_get_link(struct net_device *ndev)
-{
- return netif_carrier_ok(ndev);
+ sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
+ info->n_stats = emac_ethtool_get_stats_count(ndev);
+ info->regdump_len = emac_ethtool_get_regs_len(ndev);
}
static struct ethtool_ops emac_ethtool_ops = {
- .get_settings = emac_get_settings,
- .set_settings = emac_set_settings,
- .get_drvinfo = emac_get_drvinfo,
- .nway_reset = emac_nway_reset,
- .get_link = emac_get_link
+ .get_settings = emac_ethtool_get_settings,
+ .set_settings = emac_ethtool_set_settings,
+ .get_drvinfo = emac_ethtool_get_drvinfo,
+
+ .get_regs_len = emac_ethtool_get_regs_len,
+ .get_regs = emac_ethtool_get_regs,
+
+ .nway_reset = emac_ethtool_nway_reset,
+
+ .get_ringparam = emac_ethtool_get_ringparam,
+ .get_pauseparam = emac_ethtool_get_pauseparam,
+
+ .get_rx_csum = emac_ethtool_get_rx_csum,
+
+ .get_strings = emac_ethtool_get_strings,
+ .get_stats_count = emac_ethtool_get_stats_count,
+ .get_ethtool_stats = emac_ethtool_get_ethtool_stats,
+
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
};
-static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
- struct ocp_enet_private *fep = dev->priv;
+ struct ocp_enet_private *dev = ndev->priv;
uint16_t *data = (uint16_t *) & rq->ifr_ifru;
+ DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
+
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
+
switch (cmd) {
case SIOCGMIIPHY:
- data[0] = fep->mii_phy_addr;
+ case SIOCDEVPRIVATE:
+ data[0] = dev->phy.address;
/* Fall through */
case SIOCGMIIREG:
- data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
+ case SIOCDEVPRIVATE + 1:
+ data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
return 0;
+
case SIOCSMIIREG:
+ case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
-
- emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
+ emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
return 0;
default:
return -EOPNOTSUPP;
}
}
-static int emac_open(struct net_device *dev)
+static int __init emac_probe(struct ocp_device *ocpdev)
{
- struct ocp_enet_private *fep = dev->priv;
- int rc;
-
- spin_lock_irq(&fep->lock);
-
- fep->opened = 1;
- netif_carrier_off(dev);
-
- /* Reset & configure the chip */
- emac_reset_configure(fep);
-
- spin_unlock_irq(&fep->lock);
-
- /* Request our interrupt lines */
- rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
- if (rc != 0) {
- printk("dev->irq %d failed\n", dev->irq);
- goto bail;
- }
- /* Kick the chip rx & tx channels into life */
- spin_lock_irq(&fep->lock);
- emac_kick(fep);
- spin_unlock_irq(&fep->lock);
-
- netif_start_queue(dev);
- bail:
- return rc;
-}
-
-static int emac_close(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- /* XXX Stop IRQ emitting here */
- spin_lock_irq(&fep->lock);
- fep->opened = 0;
- mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- netif_carrier_off(dev);
- netif_stop_queue(dev);
-
- /*
- * Check for a link, some PHYs don't provide a clock if
- * no link is present. Some EMACs will not come out of
- * soft reset without a PHY clock present.
- */
- if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
- out_be32(&emacp->em0mr0, EMAC_M0_SRST);
- udelay(10);
-
- if (emacp->em0mr0 & EMAC_M0_SRST) {
- /*not sure what to do here hopefully it clears before another open */
- printk(KERN_ERR
- "%s: Phy SoftReset didn't clear, no link?\n",
- dev->name);
- }
- }
-
- /* Free the irq's */
- free_irq(dev->irq, dev);
-
- spin_unlock_irq(&fep->lock);
-
- return 0;
-}
-
-static void emac_remove(struct ocp_device *ocpdev)
-{
- struct net_device *dev = ocp_get_drvdata(ocpdev);
- struct ocp_enet_private *ep = dev->priv;
-
- /* FIXME: locking, races, ... */
- ep->going_away = 1;
- ocp_set_drvdata(ocpdev, NULL);
- if (ep->rgmii_dev)
- emac_close_rgmii(ep->rgmii_dev);
- if (ep->zmii_dev)
- emac_close_zmii(ep->zmii_dev);
-
- unregister_netdev(dev);
- del_timer_sync(&ep->link_timer);
- mal_unregister_commac(ep->mal, &ep->commac);
- iounmap((void *)ep->emacp);
- kfree(dev);
-}
-
-struct mal_commac_ops emac_commac_ops = {
- .txeob = &emac_txeob_dev,
- .txde = &emac_txde_dev,
- .rxeob = &emac_rxeob_dev,
- .rxde = &emac_rxde_dev,
-};
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void emac_netpoll(struct net_device *ndev)
-{
- emac_rxeob_dev((void *)ndev, 0);
- emac_txeob_dev((void *)ndev, 0);
-}
-#endif
-
-static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
-{
- int deferred_init = 0;
- int rc = 0, i;
+ struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
struct net_device *ndev;
- struct ocp_enet_private *ep;
- struct ocp_func_emac_data *emacdata;
- int commac_reg = 0;
- u32 phy_map;
+ struct ocp_device *maldev;
+ struct ocp_enet_private *dev;
+ int err, i;
- emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
+ DBG("%d: probe" NL, ocpdev->def->index);
+
if (!emacdata) {
printk(KERN_ERR "emac%d: Missing additional data!\n",
ocpdev->def->index);
@@ -1738,304 +1936,312 @@
/* Allocate our net_device structure */
ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
- if (ndev == NULL) {
- printk(KERN_ERR
- "emac%d: Could not allocate ethernet device.\n",
+ if (!ndev) {
+ printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
ocpdev->def->index);
return -ENOMEM;
}
- ep = ndev->priv;
- ep->ndev = ndev;
- ep->ocpdev = ocpdev;
- ndev->irq = ocpdev->def->irq;
- ep->wol_irq = emacdata->wol_irq;
- if (emacdata->mdio_idx >= 0) {
- if (emacdata->mdio_idx == ocpdev->def->index) {
- /* Set the common MDIO net_device */
- mdio_ndev = ndev;
- deferred_init = 1;
+ dev = ndev->priv;
+ dev->ndev = ndev;
+ dev->ldev = &ocpdev->dev;
+ dev->def = ocpdev->def;
+ SET_MODULE_OWNER(ndev);
+
+ /* Find MAL device we are connected to */
+ maldev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
+ if (!maldev) {
+ printk(KERN_ERR "emac%d: unknown mal%d device!\n",
+ dev->def->index, emacdata->mal_idx);
+ err = -ENODEV;
+ goto out;
+ }
+ dev->mal = ocp_get_drvdata(maldev);
+ if (!dev->mal) {
+ printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
+ dev->def->index, emacdata->mal_idx);
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* Register with MAL */
+ dev->commac.ops = &emac_commac_ops;
+ dev->commac.dev = dev;
+ dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
+ dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
+ err = mal_register_commac(dev->mal, &dev->commac);
+ if (err) {
+ printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
+ dev->def->index, emacdata->mal_idx);
+ goto out;
+ }
+ dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
+ dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
+
+ /* Get pointers to BD rings */
+ dev->tx_desc =
+ dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
+ emacdata->mal_tx_chan);
+ dev->rx_desc =
+ dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
+ emacdata->mal_rx_chan);
+
+ DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
+ DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
+
+ /* Clean rings */
+ memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
+ memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+
+ /* If we depend on another EMAC for MDIO, check whether it was probed already */
+ if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
+ struct ocp_device *mdiodev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
+ emacdata->mdio_idx);
+ if (!mdiodev) {
+ printk(KERN_ERR "emac%d: unknown emac%d device!\n",
+ dev->def->index, emacdata->mdio_idx);
+ err = -ENODEV;
+ goto out2;
}
- ep->mdio_dev = mdio_ndev;
- } else {
- ep->mdio_dev = ndev;
- }
-
- ocp_set_drvdata(ocpdev, ndev);
-
- spin_lock_init(&ep->lock);
-
- /* Fill out MAL informations and register commac */
- ep->mal = mal;
- ep->mal_tx_chan = emacdata->mal_tx_chan;
- ep->mal_rx_chan = emacdata->mal_rx_chan;
- ep->commac.ops = &emac_commac_ops;
- ep->commac.dev = ndev;
- ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
- ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
- rc = mal_register_commac(ep->mal, &ep->commac);
- if (rc != 0)
- goto bail;
- commac_reg = 1;
-
- /* Map our MMIOs */
- ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
-
- /* Check if we need to attach to a ZMII */
- if (emacdata->zmii_idx >= 0) {
- ep->zmii_input = emacdata->zmii_mux;
- ep->zmii_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
- emacdata->zmii_idx);
- if (ep->zmii_dev == NULL)
- printk(KERN_WARNING
- "emac%d: ZMII %d requested but not found !\n",
- ocpdev->def->index, emacdata->zmii_idx);
- else if ((rc =
- emac_init_zmii(ep->zmii_dev, ep->zmii_input,
- emacdata->phy_mode)) != 0)
- goto bail;
- }
-
- /* Check if we need to attach to a RGMII */
- if (emacdata->rgmii_idx >= 0) {
- ep->rgmii_input = emacdata->rgmii_mux;
- ep->rgmii_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
- emacdata->rgmii_idx);
- if (ep->rgmii_dev == NULL)
- printk(KERN_WARNING
- "emac%d: RGMII %d requested but not found !\n",
- ocpdev->def->index, emacdata->rgmii_idx);
- else if ((rc =
- emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
- emacdata->phy_mode)) != 0)
- goto bail;
- }
-
- /* Check if we need to attach to a TAH */
- if (emacdata->tah_idx >= 0) {
- ep->tah_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
- emacdata->tah_idx);
- if (ep->tah_dev == NULL)
- printk(KERN_WARNING
- "emac%d: TAH %d requested but not found !\n",
- ocpdev->def->index, emacdata->tah_idx);
- else if ((rc = emac_init_tah(ep)) != 0)
- goto bail;
- }
-
- if (deferred_init) {
- if (!list_empty(&emac_init_list)) {
- struct list_head *entry;
- struct emac_def_dev *ddev;
-
- list_for_each(entry, &emac_init_list) {
- ddev =
- list_entry(entry, struct emac_def_dev,
- link);
- emac_init_device(ddev->ocpdev, ddev->mal);
- }
+ dev->mdio_dev = ocp_get_drvdata(mdiodev);
+ if (!dev->mdio_dev) {
+ printk(KERN_ERR
+ "emac%d: emac%d hasn't been initialized yet!\n",
+ dev->def->index, emacdata->mdio_idx);
+ err = -ENODEV;
+ goto out2;
}
}
- /* Init link monitoring timer */
- init_timer(&ep->link_timer);
- ep->link_timer.function = emac_link_timer;
- ep->link_timer.data = (unsigned long)ep;
- ep->timer_ticks = 0;
+ /* Attach to ZMII, if needed */
+ if ((err = zmii_attach(dev)) != 0)
+ goto out2;
- /* Fill up the mii_phy structure */
- ep->phy_mii.dev = ndev;
- ep->phy_mii.mdio_read = emac_phy_read;
- ep->phy_mii.mdio_write = emac_phy_write;
- ep->phy_mii.mode = emacdata->phy_mode;
+ /* Attach to RGMII, if needed */
+ if ((err = rgmii_attach(dev)) != 0)
+ goto out3;
- /* Find PHY */
- phy_map = emacdata->phy_map | busy_phy_map;
- for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
- if ((phy_map & 0x1) == 0) {
- int val = emac_phy_read(ndev, i, MII_BMCR);
- if (val != 0xffff && val != -1)
- break;
- }
- }
- if (i == 0x20) {
- printk(KERN_WARNING "emac%d: Can't find PHY.\n",
- ocpdev->def->index);
- rc = -ENODEV;
- goto bail;
- }
- busy_phy_map |= 1 << i;
- ep->mii_phy_addr = i;
- rc = mii_phy_probe(&ep->phy_mii, i);
- if (rc) {
- printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
- ocpdev->def->index);
- rc = -ENODEV;
- goto bail;
- }
-
- /* Disable any PHY features not supported by the platform */
- ep->phy_mii.def->features &= ~emacdata->phy_feat_exc;
+ /* Attach to TAH, if needed */
+ if ((err = tah_attach(dev)) != 0)
+ goto out4;
- /* Setup initial PHY config & startup aneg */
- if (ep->phy_mii.def->ops->init)
- ep->phy_mii.def->ops->init(&ep->phy_mii);
- netif_carrier_off(ndev);
- if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
- ep->want_autoneg = 1;
- else {
- ep->want_autoneg = 0;
-
- /* Select highest supported speed/duplex */
- if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) {
- ep->phy_mii.speed = SPEED_1000;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_1000baseT_Half) {
- ep->phy_mii.speed = SPEED_1000;
- ep->phy_mii.duplex = DUPLEX_HALF;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_100baseT_Full) {
- ep->phy_mii.speed = SPEED_100;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_100baseT_Half) {
- ep->phy_mii.speed = SPEED_100;
- ep->phy_mii.duplex = DUPLEX_HALF;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_10baseT_Full) {
- ep->phy_mii.speed = SPEED_10;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else {
- ep->phy_mii.speed = SPEED_10;
- ep->phy_mii.duplex = DUPLEX_HALF;
- }
+ /* Map EMAC regs */
+ dev->emacp =
+ (struct emac_regs *)ioremap(dev->def->paddr,
+ sizeof(struct emac_regs));
+ if (!dev->emacp) {
+ printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
+ dev->def->index);
+ err = -ENOMEM;
+ goto out5;
}
- emac_start_link(ep, NULL);
- /* read the MAC Address */
- for (i = 0; i < 6; i++)
+ /* Fill in MAC address */
+ for (i = 0; i < 6; ++i)
ndev->dev_addr[i] = emacdata->mac_addr[i];
+ /* Set some link defaults before we can find out real parameters */
+ dev->phy.speed = SPEED_100;
+ dev->phy.duplex = DUPLEX_FULL;
+ dev->phy.autoneg = AUTONEG_DISABLE;
+ dev->phy.pause = dev->phy.asym_pause = 0;
+ init_timer(&dev->link_timer);
+ dev->link_timer.function = emac_link_timer;
+ dev->link_timer.data = (unsigned long)dev;
+
+ /* Find PHY if any */
+ dev->phy.dev = ndev;
+ dev->phy.mode = emacdata->phy_mode;
+ if (emacdata->phy_map != 0xffffffff) {
+ u32 phy_map = emacdata->phy_map | busy_phy_map;
+ u32 adv;
+
+ DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
+ emacdata->phy_map, busy_phy_map);
+
+ EMAC_RX_CLK_TX(dev->def->index);
+
+ dev->phy.mdio_read = emac_mdio_read;
+ dev->phy.mdio_write = emac_mdio_write;
+
+ /* Configure EMAC with defaults so we can at least use MDIO
+ * This is needed mostly for 440GX
+ */
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ /* XXX
+ * Make GPCS PHY address equal to EMAC index.
+ * We probably should take into account busy_phy_map
+ * and/or phy_map here.
+ */
+ dev->phy.address = dev->def->index;
+ }
+
+ emac_configure(dev);
+
+ for (i = 0; i < 0x20; phy_map >>= 1, ++i)
+ if (!(phy_map & 1)) {
+ int r;
+ busy_phy_map |= 1 << i;
+
+ /* Quick check if there is a PHY at the address */
+ r = emac_mdio_read(dev->ndev, i, MII_BMCR);
+ if (r == 0xffff || r < 0)
+ continue;
+ if (!mii_phy_probe(&dev->phy, i))
+ break;
+ }
+ if (i == 0x20) {
+ printk(KERN_WARNING "emac%d: can't find PHY!\n",
+ dev->def->index);
+ goto out6;
+ }
+
+ /* Init PHY */
+ if (dev->phy.def->ops->init)
+ dev->phy.def->ops->init(&dev->phy);
+
+ /* Disable any PHY features not supported by the platform */
+ dev->phy.def->features &= ~emacdata->phy_feat_exc;
+
+ /* Setup initial link parameters */
+ if (dev->phy.features & SUPPORTED_Autoneg) {
+ adv = dev->phy.features;
+#if !defined(CONFIG_40x)
+ adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+#endif
+ /* Restart autonegotiation */
+ dev->phy.def->ops->setup_aneg(&dev->phy, adv);
+ } else {
+ u32 f = dev->phy.def->features;
+ int speed = SPEED_10, fd = DUPLEX_HALF;
+
+ /* Select highest supported speed/duplex */
+ if (f & SUPPORTED_1000baseT_Full) {
+ speed = SPEED_1000;
+ fd = DUPLEX_FULL;
+ } else if (f & SUPPORTED_1000baseT_Half)
+ speed = SPEED_1000;
+ else if (f & SUPPORTED_100baseT_Full) {
+ speed = SPEED_100;
+ fd = DUPLEX_FULL;
+ } else if (f & SUPPORTED_100baseT_Half)
+ speed = SPEED_100;
+ else if (f & SUPPORTED_10baseT_Full)
+ fd = DUPLEX_FULL;
+
+ /* Force link parameters */
+ dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
+ }
+ } else {
+ emac_reset(dev);
+
+ /* PHY-less configuration.
+ * XXX I probably should move these settings to emacdata
+ */
+ dev->phy.address = -1;
+ dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+ dev->phy.pause = 1;
+ }
+
/* Fill in the driver function table */
ndev->open = &emac_open;
- ndev->hard_start_xmit = &emac_start_xmit;
+ if (dev->tah_dev) {
+ ndev->hard_start_xmit = &emac_start_xmit_sg;
+ ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ } else
+ ndev->hard_start_xmit = &emac_start_xmit;
+ ndev->tx_timeout = &emac_full_tx_reset;
+ ndev->watchdog_timeo = 5 * HZ;
ndev->stop = &emac_close;
ndev->get_stats = &emac_stats;
- if (emacdata->jumbo)
- ndev->change_mtu = &emac_change_mtu;
- ndev->set_mac_address = &emac_set_mac_address;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
+ if (emac_phy_supports_gige(emacdata->phy_mode)) {
+ ndev->change_mtu = &emac_change_mtu;
+ dev->commac.ops = &emac_commac_sg_ops;
+ }
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
- if (emacdata->tah_idx >= 0)
- ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = emac_netpoll;
-#endif
- SET_MODULE_OWNER(ndev);
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
- rc = register_netdev(ndev);
- if (rc != 0)
- goto bail;
+ err = register_netdev(ndev);
+ if (err) {
+ printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
+ dev->def->index, err);
+ goto out6;
+ }
- printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- ndev->name,
+ ocp_set_drvdata(ocpdev, dev);
+
+ printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ ndev->name, dev->def->index,
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
- printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
- ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
- bail:
- if (rc && commac_reg)
- mal_unregister_commac(ep->mal, &ep->commac);
- if (rc && ndev)
- kfree(ndev);
+ if (dev->phy.address >= 0)
+ printk("%s: found %s PHY (0x%02x)\n", ndev->name,
+ dev->phy.def->name, dev->phy.address);
- return rc;
-}
-
-static int emac_probe(struct ocp_device *ocpdev)
-{
- struct ocp_device *maldev;
- struct ibm_ocp_mal *mal;
- struct ocp_func_emac_data *emacdata;
-
- emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
- if (emacdata == NULL) {
- printk(KERN_ERR "emac%d: Missing additional datas !\n",
- ocpdev->def->index);
- return -ENODEV;
- }
-
- /* Get the MAL device */
- maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
- if (maldev == NULL) {
- printk("No maldev\n");
- return -ENODEV;
- }
- /*
- * Get MAL driver data, it must be here due to link order.
- * When the driver is modularized, symbol dependencies will
- * ensure the MAL driver is already present if built as a
- * module.
- */
- mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
- if (mal == NULL) {
- printk("No maldrv\n");
- return -ENODEV;
- }
-
- /* If we depend on another EMAC for MDIO, wait for it to show up */
- if (emacdata->mdio_idx >= 0 &&
- (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
- struct emac_def_dev *ddev;
- /* Add this index to the deferred init table */
- ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
- ddev->ocpdev = ocpdev;
- ddev->mal = mal;
- list_add_tail(&ddev->link, &emac_init_list);
- } else {
- emac_init_device(ocpdev, mal);
- }
+ emac_dbg_register(dev->def->index, dev);
return 0;
+ out6:
+ iounmap((void *)dev->emacp);
+ out5:
+ tah_fini(dev->tah_dev);
+ out4:
+ rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+ out3:
+ zmii_fini(dev->zmii_dev, dev->zmii_input);
+ out2:
+ mal_unregister_commac(dev->mal, &dev->commac);
+ out:
+ kfree(ndev);
+ return err;
}
-/* Structure for a device driver */
static struct ocp_device_id emac_ids[] = {
- {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
- {.vendor = OCP_VENDOR_INVALID}
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
+ { .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver emac_driver = {
.name = "emac",
.id_table = emac_ids,
-
.probe = emac_probe,
.remove = emac_remove,
};
static int __init emac_init(void)
{
- printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
- printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
+ printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
- if (skb_res > 2) {
- printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
- skb_res);
- skb_res = 2;
+ DBG(": init" NL);
+
+ if (mal_init())
+ return -ENODEV;
+
+ EMAC_CLK_INTERNAL;
+ if (ocp_register_driver(&emac_driver)) {
+ EMAC_CLK_EXTERNAL;
+ ocp_unregister_driver(&emac_driver);
+ mal_exit();
+ return -ENODEV;
}
+ EMAC_CLK_EXTERNAL;
- return ocp_register_driver(&emac_driver);
+ emac_init_debug();
+ return 0;
}
static void __exit emac_exit(void)
{
+ DBG(": exit" NL);
ocp_unregister_driver(&emac_driver);
+ mal_exit();
+ emac_fini_debug();
}
module_init(emac_init);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
index 97e6e1e..e9b44d0 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ b/drivers/net/ibm_emac/ibm_emac_core.h
@@ -1,146 +1,221 @@
/*
- * ibm_emac_core.h
+ * drivers/net/ibm_emac/ibm_emac_core.h
*
- * Ethernet driver for the built in ethernet on the IBM 405 PowerPC
- * processor.
+ * Driver for PowerPC 4xx on-chip ethernet controller.
*
- * Armin Kuster akuster@mvista.com
- * Sept, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Orignial driver
- * Johnnie Peters
- * jpeters@mvista.com
- *
- * Copyright 2000 MontaVista Softare Inc.
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Johnnie Peters <jpeters@mvista.com>
+ * Copyright 2000, 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
+#ifndef __IBM_EMAC_CORE_H_
+#define __IBM_EMAC_CORE_H_
-#ifndef _IBM_EMAC_CORE_H_
-#define _IBM_EMAC_CORE_H_
-
+#include <linux/config.h>
#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
#include <asm/ocp.h>
-#include <asm/mmu.h> /* For phys_addr_t */
#include "ibm_emac.h"
#include "ibm_emac_phy.h"
-#include "ibm_emac_rgmii.h"
#include "ibm_emac_zmii.h"
+#include "ibm_emac_rgmii.h"
#include "ibm_emac_mal.h"
#include "ibm_emac_tah.h"
-#ifndef CONFIG_IBM_EMAC_TXB
-#define NUM_TX_BUFF 64
-#define NUM_RX_BUFF 64
-#else
-#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
+#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
+
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
#endif
-/* This does 16 byte alignment, exactly what we need.
- * The packet length includes FCS, but we don't want to
- * include that when passing upstream as it messes up
- * bridging applications.
+// XXX
+#define EMAC_MIN_MTU 46
+#define EMAC_MAX_MTU 9000
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+ if (mtu > ETH_DATA_LEN)
+ return MAL_MAX_RX_SIZE;
+ else
+ return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
+
+#define EMAC_RX_SKB_HEADROOM \
+ EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+ int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+ return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+ return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ * - normal statistics (packet count, etc)
+ * - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
*/
-#ifndef CONFIG_IBM_EMAC_SKBRES
-#define SKB_RES 2
-#else
-#define SKB_RES CONFIG_IBM_EMAC_SKBRES
-#endif
-/* Note about alignement. alloc_skb() returns a cache line
- * aligned buffer. However, dev_alloc_skb() will add 16 more
- * bytes and "reserve" them, so our buffer will actually end
- * on a half cache line. What we do is to use directly
- * alloc_skb, allocate 16 more bytes to match the total amount
- * allocated by dev_alloc_skb(), but we don't reserve.
- */
-#define MAX_NUM_BUF_DESC 255
-#define DESC_BUF_SIZE 4080 /* max 4096-16 */
-#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16)
+/* Normal TX/RX Statistics */
+struct ibm_emac_stats {
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 tx_packets;
+ u64 tx_bytes;
+ u64 rx_packets_csum;
+ u64 tx_packets_csum;
+};
-/* Transmitter timeout. */
-#define TX_TIMEOUT (2*HZ)
+/* Error statistics */
+struct ibm_emac_error_stats {
+ u64 tx_undo;
-/* MDIO latency delay */
-#define MDIO_DELAY 250
+ /* Software RX Errors */
+ u64 rx_dropped_stack;
+ u64 rx_dropped_oom;
+ u64 rx_dropped_error;
+ u64 rx_dropped_resize;
+ u64 rx_dropped_mtu;
+ u64 rx_stopped;
+ /* BD reported RX errors */
+ u64 rx_bd_errors;
+ u64 rx_bd_overrun;
+ u64 rx_bd_bad_packet;
+ u64 rx_bd_runt_packet;
+ u64 rx_bd_short_event;
+ u64 rx_bd_alignment_error;
+ u64 rx_bd_bad_fcs;
+ u64 rx_bd_packet_too_long;
+ u64 rx_bd_out_of_range;
+ u64 rx_bd_in_range;
+ /* EMAC IRQ reported RX errors */
+ u64 rx_parity;
+ u64 rx_fifo_overrun;
+ u64 rx_overrun;
+ u64 rx_bad_packet;
+ u64 rx_runt_packet;
+ u64 rx_short_event;
+ u64 rx_alignment_error;
+ u64 rx_bad_fcs;
+ u64 rx_packet_too_long;
+ u64 rx_out_of_range;
+ u64 rx_in_range;
-/* Power managment shift registers */
-#define IBM_CPM_EMMII 0 /* Shift value for MII */
-#define IBM_CPM_EMRX 1 /* Shift value for recv */
-#define IBM_CPM_EMTX 2 /* Shift value for MAC */
-#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX))
+ /* Software TX Errors */
+ u64 tx_dropped;
+ /* BD reported TX errors */
+ u64 tx_bd_errors;
+ u64 tx_bd_bad_fcs;
+ u64 tx_bd_carrier_loss;
+ u64 tx_bd_excessive_deferral;
+ u64 tx_bd_excessive_collisions;
+ u64 tx_bd_late_collision;
+ u64 tx_bd_multple_collisions;
+ u64 tx_bd_single_collision;
+ u64 tx_bd_underrun;
+ u64 tx_bd_sqe;
+ /* EMAC IRQ reported TX errors */
+ u64 tx_parity;
+ u64 tx_underrun;
+ u64 tx_sqe;
+ u64 tx_errors;
+};
-#define ENET_HEADER_SIZE 14
-#define ENET_FCS_SIZE 4
-#define ENET_DEF_MTU_SIZE 1500
-#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE)
-#define EMAC_MIN_FRAME 64
-#define EMAC_MAX_FRAME 9018
-#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-
-#ifdef CONFIG_IBM_EMAC_ERRMSG
-void emac_serr_dump_0(struct net_device *dev);
-void emac_serr_dump_1(struct net_device *dev);
-void emac_err_dump(struct net_device *dev, int em0isr);
-void emac_phy_dump(struct net_device *);
-void emac_desc_dump(struct net_device *);
-void emac_mac_dump(struct net_device *);
-void emac_mal_dump(struct net_device *);
-#else
-#define emac_serr_dump_0(dev) do { } while (0)
-#define emac_serr_dump_1(dev) do { } while (0)
-#define emac_err_dump(dev,x) do { } while (0)
-#define emac_phy_dump(dev) do { } while (0)
-#define emac_desc_dump(dev) do { } while (0)
-#define emac_mac_dump(dev) do { } while (0)
-#define emac_mal_dump(dev) do { } while (0)
-#endif
+#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \
+ sizeof(struct ibm_emac_error_stats)) \
+ / sizeof(u64))
struct ocp_enet_private {
- struct sk_buff *tx_skb[NUM_TX_BUFF];
- struct sk_buff *rx_skb[NUM_RX_BUFF];
- struct mal_descriptor *tx_desc;
- struct mal_descriptor *rx_desc;
- struct mal_descriptor *rx_dirty;
- struct net_device_stats stats;
- int tx_cnt;
- int rx_slot;
- int dirty_rx;
- int tx_slot;
- int ack_slot;
- int rx_buffer_size;
+ struct net_device *ndev; /* 0 */
+ struct emac_regs *emacp;
+
+ struct mal_descriptor *tx_desc;
+ int tx_cnt;
+ int tx_slot;
+ int ack_slot;
- struct mii_phy phy_mii;
- int mii_phy_addr;
- int want_autoneg;
- int timer_ticks;
- struct timer_list link_timer;
- struct net_device *mdio_dev;
+ struct mal_descriptor *rx_desc;
+ int rx_slot;
+ struct sk_buff *rx_sg_skb; /* 1 */
+ int rx_skb_size;
+ int rx_sync_size;
- struct ocp_device *rgmii_dev;
- int rgmii_input;
+ struct ibm_emac_stats stats;
+ struct ocp_device *tah_dev;
- struct ocp_device *zmii_dev;
- int zmii_input;
+ struct ibm_ocp_mal *mal;
+ struct mal_commac commac;
- struct ibm_ocp_mal *mal;
- int mal_tx_chan, mal_rx_chan;
- struct mal_commac commac;
+ struct sk_buff *tx_skb[NUM_TX_BUFF];
+ struct sk_buff *rx_skb[NUM_RX_BUFF];
- struct ocp_device *tah_dev;
+ struct ocp_device *zmii_dev;
+ int zmii_input;
+ struct ocp_enet_private *mdio_dev;
+ struct ocp_device *rgmii_dev;
+ int rgmii_input;
- int opened;
- int going_away;
- int wol_irq;
- emac_t *emacp;
- struct ocp_device *ocpdev;
- struct net_device *ndev;
- spinlock_t lock;
+ struct ocp_def *def;
+
+ struct mii_phy phy;
+ struct timer_list link_timer;
+ int reset_failed;
+
+ struct ibm_emac_error_stats estats;
+ struct net_device_stats nstats;
+
+ struct device* ldev;
};
-#endif /* _IBM_EMAC_CORE_H_ */
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
+ * when available.
+ *
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
+#define EMAC_ETHTOOL_REGS_TAH 0x00000004
+
+struct emac_ethtool_regs_hdr {
+ u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+ u32 version;
+ u32 index;
+};
+
+#endif /* __IBM_EMAC_CORE_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
index c851204..75d3b86 100644
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ b/drivers/net/ibm_emac/ibm_emac_debug.c
@@ -1,224 +1,213 @@
/*
- * ibm_ocp_debug.c
+ * drivers/net/ibm_emac/ibm_emac_debug.c
*
- * This has all the debug routines that where in *_enet.c
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
- * Armin Kuster akuster@mvista.com
- * April , 2002
- *
- * Copyright 2002 MontaVista Softare Inc.
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/sysrq.h>
#include <asm/io.h>
-#include "ibm_ocp_mal.h"
-#include "ibm_ocp_zmii.h"
-#include "ibm_ocp_enet.h"
-extern int emac_phy_read(struct net_device *dev, int mii_id, int reg);
+#include "ibm_emac_core.h"
-void emac_phy_dump(struct net_device *dev)
+static void emac_desc_dump(int idx, struct ocp_enet_private *p)
{
- struct ocp_enet_private *fep = dev->priv;
- unsigned long i;
- uint data;
+ int i;
+ printk("** EMAC%d TX BDs **\n"
+ " tx_cnt = %d tx_slot = %d ack_slot = %d\n",
+ idx, p->tx_cnt, p->tx_slot, p->ack_slot);
+ for (i = 0; i < NUM_TX_BUFF / 2; ++i)
+ printk
+ ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+ i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
+ p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
+ NUM_TX_BUFF / 2 + i,
+ p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
+ p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
+ p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
+ p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
- printk(KERN_DEBUG " Prepare for Phy dump....\n");
- for (i = 0; i < 0x1A; i++) {
- data = emac_phy_read(dev, fep->mii_phy_addr, i);
- printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);
- if (i == 0x07)
- i = 0x0f;
+ printk("** EMAC%d RX BDs **\n"
+ " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
+ " rx_sg_skb = 0x%p\n",
+ idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
+ p->rx_sync_size, p->rx_sg_skb);
+ for (i = 0; i < NUM_RX_BUFF / 2; ++i)
+ printk
+ ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+ i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
+ p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
+ NUM_RX_BUFF / 2 + i,
+ p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
+ p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
+ p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
+ p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
+}
+
+static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+
+ printk("** EMAC%d registers **\n"
+ "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
+ "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
+ "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
+ "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
+ "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "LSA = %04x%08x IPGVR = 0x%04x\n"
+ "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
+ "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
+ idx, in_be32(&p->mr0), in_be32(&p->mr1),
+ in_be32(&p->tmr0), in_be32(&p->tmr1),
+ in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
+ in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
+ in_be32(&p->vtci),
+ in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
+ in_be32(&p->iaht4),
+ in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
+ in_be32(&p->gaht4),
+ in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
+ in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
+ in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
+ );
+
+ emac_desc_dump(idx, dev);
+}
+
+static void emac_mal_dump(struct ibm_ocp_mal *mal)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ int i;
+
+ printk("** MAL%d Registers **\n"
+ "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
+ "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
+ "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
+ mal->def->index,
+ get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
+ get_mal_dcrn(mal, MAL_IER),
+ get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
+ get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
+ get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
+ get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
+ );
+
+ printk("TX|");
+ for (i = 0; i < maldata->num_tx_chans; ++i) {
+ if (i && !(i % 4))
+ printk("\n ");
+ printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
}
-}
-
-void emac_desc_dump(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- int curr_slot;
-
- printk(KERN_DEBUG
- "dumping the receive descriptors: current slot is %d\n",
- fep->rx_slot);
- for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {
- printk(KERN_DEBUG
- "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",
- curr_slot, fep->rx_desc[curr_slot].ctrl,
- fep->rx_desc[curr_slot].data_len,
- (unsigned int)fep->rx_desc[curr_slot].data_ptr);
+ printk("\nRX|");
+ for (i = 0; i < maldata->num_rx_chans; ++i) {
+ if (i && !(i % 4))
+ printk("\n ");
+ printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
}
-}
-
-void emac_mac_dump(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- volatile emac_t *emacp = fep->emacp;
-
- printk(KERN_DEBUG "EMAC DEBUG ********** \n");
- printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0));
- printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1));
- printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));
- printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));
- printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));
- printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));
- printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));
- printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));
- printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));
- printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n",
- in_be32(&emacp->em0vtpid));
-}
-
-void emac_mal_dump(struct net_device *dev)
-{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
-
- printk(KERN_DEBUG " MAL DEBUG ********** \n");
- printk(KERN_DEBUG " MCR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALCR));
- printk(KERN_DEBUG " ESR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALESR));
- printk(KERN_DEBUG " IER ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALIER));
-#ifdef CONFIG_40x
- printk(KERN_DEBUG " DBR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR));
-#endif /* CONFIG_40x */
- printk(KERN_DEBUG " TXCASR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR));
- printk(KERN_DEBUG " TXCARR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR));
- printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR));
- printk(KERN_DEBUG " TXDEIR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR));
- printk(KERN_DEBUG " RXCASR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR));
- printk(KERN_DEBUG " RXCARR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR));
- printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR));
- printk(KERN_DEBUG " RXDEIR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR));
- printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R));
- printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R));
- printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R));
- printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R));
- printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R));
- printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R));
- printk(KERN_DEBUG " RCBS0 ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0));
- printk(KERN_DEBUG " RCBS1 ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1));
-}
-
-void emac_serr_dump_0(struct net_device *dev)
-{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
- unsigned long int mal_error, plb_error, plb_addr;
-
- mal_error = get_mal_dcrn(mal, DCRN_MALESR);
- printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",
- (mal_error & 0x40000000) ? "Receive" :
- "Transmit", (mal_error & 0x3e000000) >> 25);
- printk(KERN_DEBUG " ----- latched error -----\n");
- if (mal_error & MALESR_DE)
- printk(KERN_DEBUG " DE: descriptor error\n");
- if (mal_error & MALESR_OEN)
- printk(KERN_DEBUG " ONE: OPB non-fullword error\n");
- if (mal_error & MALESR_OTE)
- printk(KERN_DEBUG " OTE: OPB timeout error\n");
- if (mal_error & MALESR_OSE)
- printk(KERN_DEBUG " OSE: OPB slave error\n");
-
- if (mal_error & MALESR_PEIN) {
- plb_error = mfdcr(DCRN_PLB0_BESR);
- printk(KERN_DEBUG
- " PEIN: PLB error, PLB0_BESR is 0x%x\n",
- (unsigned int)plb_error);
- plb_addr = mfdcr(DCRN_PLB0_BEAR);
- printk(KERN_DEBUG
- " PEIN: PLB error, PLB0_BEAR is 0x%x\n",
- (unsigned int)plb_addr);
+ printk("\n ");
+ for (i = 0; i < maldata->num_rx_chans; ++i) {
+ u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
+ if (i && !(i % 3))
+ printk("\n ");
+ printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
}
+ printk("\n");
}
-void emac_serr_dump_1(struct net_device *dev)
+static struct ocp_enet_private *__emacs[4];
+static struct ibm_ocp_mal *__mals[1];
+
+void emac_dbg_register(int idx, struct ocp_enet_private *dev)
{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
- int mal_error = get_mal_dcrn(mal, DCRN_MALESR);
+ unsigned long flags;
- printk(KERN_DEBUG " ----- cumulative errors -----\n");
- if (mal_error & MALESR_DEI)
- printk(KERN_DEBUG " DEI: descriptor error interrupt\n");
- if (mal_error & MALESR_ONEI)
- printk(KERN_DEBUG " OPB non-fullword error interrupt\n");
- if (mal_error & MALESR_OTEI)
- printk(KERN_DEBUG " OTEI: timeout error interrupt\n");
- if (mal_error & MALESR_OSEI)
- printk(KERN_DEBUG " OSEI: slave error interrupt\n");
- if (mal_error & MALESR_PBEI)
- printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n");
+ if (idx >= sizeof(__emacs) / sizeof(__emacs[0])) {
+ printk(KERN_WARNING
+ "invalid index %d when registering EMAC for debugging\n",
+ idx);
+ return;
+ }
+
+ local_irq_save(flags);
+ __emacs[idx] = dev;
+ local_irq_restore(flags);
}
-void emac_err_dump(struct net_device *dev, int em0isr)
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
{
- printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);
+ unsigned long flags;
- if (em0isr & EMAC_ISR_OVR)
- printk(KERN_DEBUG " OVR: overrun\n");
- if (em0isr & EMAC_ISR_PP)
- printk(KERN_DEBUG " PP: control pause packet\n");
- if (em0isr & EMAC_ISR_BP)
- printk(KERN_DEBUG " BP: packet error\n");
- if (em0isr & EMAC_ISR_RP)
- printk(KERN_DEBUG " RP: runt packet\n");
- if (em0isr & EMAC_ISR_SE)
- printk(KERN_DEBUG " SE: short event\n");
- if (em0isr & EMAC_ISR_ALE)
- printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n");
- if (em0isr & EMAC_ISR_BFCS)
- printk(KERN_DEBUG " BFCS: bad FCS\n");
- if (em0isr & EMAC_ISR_PTLE)
- printk(KERN_DEBUG " PTLE: oversized packet\n");
- if (em0isr & EMAC_ISR_ORE)
- printk(KERN_DEBUG
- " ORE: packet length field > max allowed LLC\n");
- if (em0isr & EMAC_ISR_IRE)
- printk(KERN_DEBUG " IRE: In Range error\n");
- if (em0isr & EMAC_ISR_DBDM)
- printk(KERN_DEBUG " DBDM: xmit error or SQE\n");
- if (em0isr & EMAC_ISR_DB0)
- printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n");
- if (em0isr & EMAC_ISR_SE0)
- printk(KERN_DEBUG
- " SE0: Signal Quality Error test failure from TX channel 0\n");
- if (em0isr & EMAC_ISR_TE0)
- printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n");
- if (em0isr & EMAC_ISR_DB1)
- printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n");
- if (em0isr & EMAC_ISR_SE1)
- printk(KERN_DEBUG
- " SE1: Signal Quality Error test failure from TX channel 1\n");
- if (em0isr & EMAC_ISR_TE1)
- printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n");
- if (em0isr & EMAC_ISR_MOS)
- printk(KERN_DEBUG " MOS\n");
- if (em0isr & EMAC_ISR_MOF)
- printk(KERN_DEBUG " MOF\n");
+ if (idx >= sizeof(__mals) / sizeof(__mals[0])) {
+ printk(KERN_WARNING
+ "invalid index %d when registering MAL for debugging\n",
+ idx);
+ return;
+ }
- emac_mac_dump(dev);
- emac_mal_dump(dev);
+ local_irq_save(flags);
+ __mals[idx] = mal;
+ local_irq_restore(flags);
}
+
+void emac_dbg_dump_all(void)
+{
+ unsigned int i;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ for (i = 0; i < sizeof(__mals) / sizeof(__mals[0]); ++i)
+ if (__mals[i])
+ emac_mal_dump(__mals[i]);
+
+ for (i = 0; i < sizeof(__emacs) / sizeof(__emacs[0]); ++i)
+ if (__emacs[i])
+ emac_mac_dump(i, __emacs[i]);
+
+ local_irq_restore(flags);
+}
+
+#if defined(CONFIG_MAGIC_SYSRQ)
+static void emac_sysrq_handler(int key, struct pt_regs *pt_regs,
+ struct tty_struct *tty)
+{
+ emac_dbg_dump_all();
+}
+
+static struct sysrq_key_op emac_sysrq_op = {
+ .handler = emac_sysrq_handler,
+ .help_msg = "emaC",
+ .action_msg = "Show EMAC(s) status",
+};
+
+int __init emac_init_debug(void)
+{
+ return register_sysrq_key('c', &emac_sysrq_op);
+}
+
+void __exit emac_fini_debug(void)
+{
+ unregister_sysrq_key('c', &emac_sysrq_op);
+}
+
+#else
+int __init emac_init_debug(void)
+{
+ return 0;
+}
+void __exit emac_fini_debug(void)
+{
+}
+#endif /* CONFIG_MAGIC_SYSRQ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
new file mode 100644
index 0000000..e85fbe0
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_debug.h
@@ -0,0 +1,63 @@
+/*
+ * drivers/net/ibm_emac/ibm_ocp_debug.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_DEBUG_H_
+#define __IBM_EMAC_DEBUG_H_
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "ibm_emac_core.h"
+#include "ibm_emac_mal.h"
+
+#if defined(CONFIG_IBM_EMAC_DEBUG)
+void emac_dbg_register(int idx, struct ocp_enet_private *dev);
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
+int emac_init_debug(void) __init;
+void emac_fini_debug(void) __exit;
+void emac_dbg_dump_all(void);
+# define DBG_LEVEL 1
+#else
+# define emac_dbg_register(x,y) ((void)0)
+# define mal_dbg_register(x,y) ((void)0)
+# define emac_init_debug() ((void)0)
+# define emac_fini_debug() ((void)0)
+# define emac_dbg_dump_all() ((void)0)
+# define DBG_LEVEL 0
+#endif
+
+#if DBG_LEVEL > 0
+# define DBG(f,x...) printk("emac" f, ##x)
+# define MAL_DBG(f,x...) printk("mal" f, ##x)
+# define ZMII_DBG(f,x...) printk("zmii" f, ##x)
+# define RGMII_DBG(f,x...) printk("rgmii" f, ##x)
+# define NL "\n"
+#else
+# define DBG(f,x...) ((void)0)
+# define MAL_DBG(f,x...) ((void)0)
+# define ZMII_DBG(f,x...) ((void)0)
+# define RGMII_DBG(f,x...) ((void)0)
+#endif
+#if DBG_LEVEL > 1
+# define DBG2(f,x...) DBG(f, ##x)
+# define MAL_DBG2(f,x...) MAL_DBG(f, ##x)
+# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x)
+# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x)
+#else
+# define DBG2(f,x...) ((void)0)
+# define MAL_DBG2(f,x...) ((void)0)
+# define ZMII_DBG2(f,x...) ((void)0)
+# define RGMII_DBG2(f,x...) ((void)0)
+#endif
+
+#endif /* __IBM_EMAC_DEBUG_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
index e59f57f..da88d43 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.c
+++ b/drivers/net/ibm_emac/ibm_emac_mal.c
@@ -1,436 +1,565 @@
/*
- * ibm_ocp_mal.c
+ * drivers/net/ibm_emac/ibm_emac_mal.c
*
- * Armin Kuster akuster@mvista.com
- * Juen, 2002
+ * Memory Access Layer (MAL) support
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>,
+ * David Gibson <hermes@gibson.dropbear.id.au>,
+ *
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/ocp.h>
+#include "ibm_emac_core.h"
#include "ibm_emac_mal.h"
+#include "ibm_emac_debug.h"
-// Locking: Should we share a lock with the client ? The client could provide
-// a lock pointer (optionally) in the commac structure... I don't think this is
-// really necessary though
-
-/* This lock protects the commac list. On today UP implementations, it's
- * really only used as IRQ protection in mal_{register,unregister}_commac()
- */
-static DEFINE_RWLOCK(mal_list_lock);
-
-int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+int __init mal_register_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
+ local_irq_save(flags);
- write_lock_irqsave(&mal_list_lock, flags);
+ MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
+ commac->tx_chan_mask, commac->rx_chan_mask);
- /* Don't let multiple commacs claim the same channel */
+ /* Don't let multiple commacs claim the same channel(s) */
if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
(mal->rx_chan_mask & commac->rx_chan_mask)) {
- write_unlock_irqrestore(&mal_list_lock, flags);
+ local_irq_restore(flags);
+ printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
+ mal->def->index);
return -EBUSY;
}
mal->tx_chan_mask |= commac->tx_chan_mask;
mal->rx_chan_mask |= commac->rx_chan_mask;
+ list_add(&commac->list, &mal->list);
- list_add(&commac->list, &mal->commac);
-
- write_unlock_irqrestore(&mal_list_lock, flags);
-
+ local_irq_restore(flags);
return 0;
}
-int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+void __exit mal_unregister_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
+ local_irq_save(flags);
- write_lock_irqsave(&mal_list_lock, flags);
+ MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
+ commac->tx_chan_mask, commac->rx_chan_mask);
mal->tx_chan_mask &= ~commac->tx_chan_mask;
mal->rx_chan_mask &= ~commac->rx_chan_mask;
-
list_del_init(&commac->list);
- write_unlock_irqrestore(&mal_list_lock, flags);
-
- return 0;
+ local_irq_restore(flags);
}
int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
{
- switch (channel) {
- case 0:
- set_mal_dcrn(mal, DCRN_MALRCBS0, size);
- break;
-#ifdef DCRN_MALRCBS1
- case 1:
- set_mal_dcrn(mal, DCRN_MALRCBS1, size);
- break;
-#endif
-#ifdef DCRN_MALRCBS2
- case 2:
- set_mal_dcrn(mal, DCRN_MALRCBS2, size);
- break;
-#endif
-#ifdef DCRN_MALRCBS3
- case 3:
- set_mal_dcrn(mal, DCRN_MALRCBS3, size);
- break;
-#endif
- default:
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
+ size > MAL_MAX_RX_SIZE);
+
+ MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
+
+ if (size & 0xf) {
+ printk(KERN_WARNING
+ "mal%d: incorrect RX size %lu for the channel %d\n",
+ mal->def->index, size, channel);
return -EINVAL;
}
+ set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
return 0;
}
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
+ return channel * NUM_TX_BUFF;
+}
+
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
+ return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
+}
+
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ local_bh_disable();
+ MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
+ set_mal_dcrn(mal, MAL_TXCASR,
+ get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
+ local_bh_enable();
+}
+
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
+ MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
+}
+
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ local_bh_disable();
+ MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
+ set_mal_dcrn(mal, MAL_RXCASR,
+ get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
+ local_bh_enable();
+}
+
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
+ MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
+}
+
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ local_bh_disable();
+ MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
+ list_add_tail(&commac->poll_list, &mal->poll_list);
+ local_bh_enable();
+}
+
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ local_bh_disable();
+ MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
+ list_del(&commac->poll_list);
+ local_bh_enable();
+}
+
+/* synchronized by mal_poll() */
+static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
+{
+ MAL_DBG2("%d: enable_irq" NL, mal->def->index);
+ set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
+}
+
+/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
+static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
+{
+ set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
+ MAL_DBG2("%d: disable_irq" NL, mal->def->index);
+}
+
static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- unsigned long mal_error;
-
- /*
- * This SERR applies to one of the devices on the MAL, here we charge
- * it against the first EMAC registered for the MAL.
- */
-
- mal_error = get_mal_dcrn(mal, DCRN_MALESR);
-
- printk(KERN_ERR "%s: System Error (MALESR=%lx)\n",
- "MAL" /* FIXME: get the name right */ , mal_error);
-
- /* FIXME: decipher error */
- /* DIXME: distribute to commacs, if possible */
+ u32 esr = get_mal_dcrn(mal, MAL_ESR);
/* Clear the error status register */
- set_mal_dcrn(mal, DCRN_MALESR, mal_error);
+ set_mal_dcrn(mal, MAL_ESR, esr);
+ MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
+
+ if (esr & MAL_ESR_EVB) {
+ if (esr & MAL_ESR_DE) {
+ /* We ignore Descriptor error,
+ * TXDE or RXDE interrupt will be generated anyway.
+ */
+ return IRQ_HANDLED;
+ }
+
+ if (esr & MAL_ESR_PEIN) {
+ /* PLB error, it's probably buggy hardware or
+ * incorrect physical address in BD (i.e. bug)
+ */
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: system error, PLB (ESR = 0x%08x)\n",
+ mal->def->index, esr);
+ return IRQ_HANDLED;
+ }
+
+ /* OPB error, it's probably buggy hardware or incorrect EBC setup */
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: system error, OPB (ESR = 0x%08x)\n",
+ mal->def->index, esr);
+ }
return IRQ_HANDLED;
}
+static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
+{
+ if (likely(netif_rx_schedule_prep(&mal->poll_dev))) {
+ MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
+ mal_disable_eob_irq(mal);
+ __netif_rx_schedule(&mal->poll_dev);
+ } else
+ MAL_DBG2("%d: already in poll" NL, mal->def->index);
+}
+
static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long isr;
-
- isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR);
- set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (isr & mc->tx_chan_mask) {
- mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
-
+ u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
+ MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_TXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long isr;
-
- isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR);
- set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (isr & mc->rx_chan_mask) {
- mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
-
+ u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
+ MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_RXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long deir;
+ u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
+ set_mal_dcrn(mal, MAL_TXDEIR, deir);
- deir = get_mal_dcrn(mal, DCRN_MALTXDEIR);
+ MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
- /* FIXME: print which MAL correctly */
- printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n",
- "MAL", deir);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (deir & mc->tx_chan_mask) {
- mc->ops->txde(mc->dev, deir & mc->tx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
+ mal->def->index, deir);
return IRQ_HANDLED;
}
-/*
- * This interrupt should be very rare at best. This occurs when
- * the hardware has a problem with the receive descriptors. The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set. The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way. At that point the driver
- * will be restarted.
- */
static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
- unsigned long deir;
+ u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
- deir = get_mal_dcrn(mal, DCRN_MALRXDEIR);
+ MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
- /*
- * This really is needed. This case encountered in stress testing.
- */
- if (deir == 0)
- return IRQ_HANDLED;
-
- /* FIXME: print which MAL correctly */
- printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n",
- "MAL", deir);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
+ list_for_each(l, &mal->list) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
if (deir & mc->rx_chan_mask) {
- mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask);
+ mc->rx_stopped = 1;
+ mc->ops->rxde(mc->dev);
}
}
- read_unlock(&mal_list_lock);
+
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_RXDEIR, deir);
return IRQ_HANDLED;
}
+static int mal_poll(struct net_device *ndev, int *budget)
+{
+ struct ibm_ocp_mal *mal = ndev->priv;
+ struct list_head *l;
+ int rx_work_limit = min(ndev->quota, *budget), received = 0, done;
+
+ MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
+ rx_work_limit);
+ again:
+ /* Process TX skbs */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ mc->ops->poll_tx(mc->dev);
+ }
+
+ /* Process RX skbs.
+ * We _might_ need something more smart here to enforce polling fairness.
+ */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ int n = mc->ops->poll_rx(mc->dev, rx_work_limit);
+ if (n) {
+ received += n;
+ rx_work_limit -= n;
+ if (rx_work_limit <= 0) {
+ done = 0;
+ goto more_work; // XXX What if this is the last one ?
+ }
+ }
+ }
+
+ /* We need to disable IRQs to protect from RXDE IRQ here */
+ local_irq_disable();
+ __netif_rx_complete(ndev);
+ mal_enable_eob_irq(mal);
+ local_irq_enable();
+
+ done = 1;
+
+ /* Check for "rotting" packet(s) */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
+ MAL_DBG2("%d: rotting packet" NL, mal->def->index);
+ if (netif_rx_reschedule(ndev, received))
+ mal_disable_eob_irq(mal);
+ else
+ MAL_DBG2("%d: already in poll list" NL,
+ mal->def->index);
+
+ if (rx_work_limit > 0)
+ goto again;
+ else
+ goto more_work;
+ }
+ mc->ops->poll_tx(mc->dev);
+ }
+
+ more_work:
+ ndev->quota -= received;
+ *budget -= received;
+
+ MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, *budget,
+ done ? 0 : 1);
+ return done ? 0 : 1;
+}
+
+static void mal_reset(struct ibm_ocp_mal *mal)
+{
+ int n = 10;
+ MAL_DBG("%d: reset" NL, mal->def->index);
+
+ set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
+
+ /* Wait for reset to complete (1 system clock) */
+ while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
+ --n;
+
+ if (unlikely(!n))
+ printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
+}
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct ibm_mal_regs);
+}
+
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
+{
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ int i;
+
+ hdr->version = MAL_VERSION;
+ hdr->index = mal->def->index;
+
+ regs->tx_count = maldata->num_tx_chans;
+ regs->rx_count = maldata->num_rx_chans;
+
+ regs->cfg = get_mal_dcrn(mal, MAL_CFG);
+ regs->esr = get_mal_dcrn(mal, MAL_ESR);
+ regs->ier = get_mal_dcrn(mal, MAL_IER);
+ regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
+ regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
+ regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
+ regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
+ regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
+ regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
+ regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
+ regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
+
+ for (i = 0; i < regs->tx_count; ++i)
+ regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
+
+ for (i = 0; i < regs->rx_count; ++i) {
+ regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
+ regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
+ }
+ return regs + 1;
+}
+
static int __init mal_probe(struct ocp_device *ocpdev)
{
- struct ibm_ocp_mal *mal = NULL;
+ struct ibm_ocp_mal *mal;
struct ocp_func_mal_data *maldata;
- int err = 0;
+ int err = 0, i, bd_size;
- maldata = (struct ocp_func_mal_data *)ocpdev->def->additions;
+ MAL_DBG("%d: probe" NL, ocpdev->def->index);
+
+ maldata = ocpdev->def->additions;
if (maldata == NULL) {
- printk(KERN_ERR "mal%d: Missing additional datas !\n",
+ printk(KERN_ERR "mal%d: missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
- mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
- if (mal == NULL) {
+ mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
+ if (!mal) {
printk(KERN_ERR
- "mal%d: Out of memory allocating MAL structure !\n",
+ "mal%d: out of memory allocating MAL structure!\n",
ocpdev->def->index);
return -ENOMEM;
}
- memset(mal, 0, sizeof(*mal));
+ mal->dcrbase = maldata->dcr_base;
+ mal->def = ocpdev->def;
- switch (ocpdev->def->index) {
- case 0:
- mal->dcrbase = DCRN_MAL_BASE;
- break;
-#ifdef DCRN_MAL1_BASE
- case 1:
- mal->dcrbase = DCRN_MAL1_BASE;
- break;
-#endif
- default:
- BUG();
- }
+ INIT_LIST_HEAD(&mal->poll_list);
+ set_bit(__LINK_STATE_START, &mal->poll_dev.state);
+ mal->poll_dev.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
+ mal->poll_dev.poll = mal_poll;
+ mal->poll_dev.priv = mal;
+ atomic_set(&mal->poll_dev.refcnt, 1);
- /**************************/
+ INIT_LIST_HEAD(&mal->list);
- INIT_LIST_HEAD(&mal->commac);
-
- set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF);
- set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF);
-
- set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */
- /* FIXME: Add delay */
+ /* Load power-on reset defaults */
+ mal_reset(mal);
/* Set the MAL configuration register */
- set_mal_dcrn(mal, DCRN_MALCR,
- MALCR_PLBB | MALCR_OPBBL | MALCR_LEA |
- MALCR_PLBLT_DEFAULT);
+ set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
+ MAL_CFG_OPBBL | MAL_CFG_LEA);
- /* It would be nice to allocate buffers separately for each
- * channel, but we can't because the channels share the upper
- * 13 bits of address lines. Each channels buffer must also
- * be 4k aligned, so we allocate 4k for each channel. This is
- * inefficient FIXME: do better, if possible */
- mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
- MAL_DT_ALIGN *
- maldata->num_tx_chans,
- &mal->tx_phys_addr, GFP_KERNEL);
- if (mal->tx_virt_addr == NULL) {
+ mal_enable_eob_irq(mal);
+
+ /* Allocate space for BD rings */
+ BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
+ BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
+ bd_size = sizeof(struct mal_descriptor) *
+ (NUM_TX_BUFF * maldata->num_tx_chans +
+ NUM_RX_BUFF * maldata->num_rx_chans);
+ mal->bd_virt =
+ dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
+
+ if (!mal->bd_virt) {
printk(KERN_ERR
- "mal%d: Out of memory allocating MAL descriptors !\n",
- ocpdev->def->index);
+ "mal%d: out of memory allocating RX/TX descriptors!\n",
+ mal->def->index);
err = -ENOMEM;
goto fail;
}
+ memset(mal->bd_virt, 0, bd_size);
- /* God, oh, god, I hate DCRs */
- set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr);
-#ifdef DCRN_MALTXCTP1R
- if (maldata->num_tx_chans > 1)
- set_mal_dcrn(mal, DCRN_MALTXCTP1R,
- mal->tx_phys_addr + MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP1R */
-#ifdef DCRN_MALTXCTP2R
- if (maldata->num_tx_chans > 2)
- set_mal_dcrn(mal, DCRN_MALTXCTP2R,
- mal->tx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP2R */
-#ifdef DCRN_MALTXCTP3R
- if (maldata->num_tx_chans > 3)
- set_mal_dcrn(mal, DCRN_MALTXCTP3R,
- mal->tx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP3R */
-#ifdef DCRN_MALTXCTP4R
- if (maldata->num_tx_chans > 4)
- set_mal_dcrn(mal, DCRN_MALTXCTP4R,
- mal->tx_phys_addr + 4 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP4R */
-#ifdef DCRN_MALTXCTP5R
- if (maldata->num_tx_chans > 5)
- set_mal_dcrn(mal, DCRN_MALTXCTP5R,
- mal->tx_phys_addr + 5 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP5R */
-#ifdef DCRN_MALTXCTP6R
- if (maldata->num_tx_chans > 6)
- set_mal_dcrn(mal, DCRN_MALTXCTP6R,
- mal->tx_phys_addr + 6 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP6R */
-#ifdef DCRN_MALTXCTP7R
- if (maldata->num_tx_chans > 7)
- set_mal_dcrn(mal, DCRN_MALTXCTP7R,
- mal->tx_phys_addr + 7 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP7R */
+ for (i = 0; i < maldata->num_tx_chans; ++i)
+ set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
+ sizeof(struct mal_descriptor) *
+ mal_tx_bd_offset(mal, i));
- mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
- MAL_DT_ALIGN *
- maldata->num_rx_chans,
- &mal->rx_phys_addr, GFP_KERNEL);
-
- set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr);
-#ifdef DCRN_MALRXCTP1R
- if (maldata->num_rx_chans > 1)
- set_mal_dcrn(mal, DCRN_MALRXCTP1R,
- mal->rx_phys_addr + MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP1R */
-#ifdef DCRN_MALRXCTP2R
- if (maldata->num_rx_chans > 2)
- set_mal_dcrn(mal, DCRN_MALRXCTP2R,
- mal->rx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP2R */
-#ifdef DCRN_MALRXCTP3R
- if (maldata->num_rx_chans > 3)
- set_mal_dcrn(mal, DCRN_MALRXCTP3R,
- mal->rx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP3R */
+ for (i = 0; i < maldata->num_rx_chans; ++i)
+ set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
+ sizeof(struct mal_descriptor) *
+ mal_rx_bd_offset(mal, i));
err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
if (err)
- goto fail;
- err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal);
+ goto fail2;
+ err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
if (err)
- goto fail;
+ goto fail3;
err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
- goto fail;
+ goto fail4;
err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
if (err)
- goto fail;
+ goto fail5;
err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
if (err)
- goto fail;
+ goto fail6;
- set_mal_dcrn(mal, DCRN_MALIER,
- MALIER_DE | MALIER_NE | MALIER_TE |
- MALIER_OPBE | MALIER_PLBE);
+ /* Enable all MAL SERR interrupt sources */
+ set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
- /* Advertise me to the rest of the world */
+ /* Advertise this instance to the rest of the world */
ocp_set_drvdata(ocpdev, mal);
- printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n",
- ocpdev->def->index, maldata->num_tx_chans,
- maldata->num_rx_chans);
+ mal_dbg_register(mal->def->index, mal);
+ printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
+ mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
return 0;
+ fail6:
+ free_irq(maldata->rxde_irq, mal);
+ fail5:
+ free_irq(maldata->txeob_irq, mal);
+ fail4:
+ free_irq(maldata->txde_irq, mal);
+ fail3:
+ free_irq(maldata->serr_irq, mal);
+ fail2:
+ dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
fail:
- /* FIXME: dispose requested IRQs ! */
- if (err && mal)
- kfree(mal);
+ kfree(mal);
return err;
}
static void __exit mal_remove(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
- struct ocp_func_mal_data *maldata = ocpdev->def->additions;
+ struct ocp_func_mal_data *maldata = mal->def->additions;
- BUG_ON(!maldata);
+ MAL_DBG("%d: remove" NL, mal->def->index);
+
+ /* Syncronize with scheduled polling,
+ stolen from net/core/dev.c:dev_close()
+ */
+ clear_bit(__LINK_STATE_START, &mal->poll_dev.state);
+ netif_poll_disable(&mal->poll_dev);
+
+ if (!list_empty(&mal->list)) {
+ /* This is *very* bad */
+ printk(KERN_EMERG
+ "mal%d: commac list is not empty on remove!\n",
+ mal->def->index);
+ }
ocp_set_drvdata(ocpdev, NULL);
- /* FIXME: shut down the MAL, deal with dependency with emac */
free_irq(maldata->serr_irq, mal);
free_irq(maldata->txde_irq, mal);
free_irq(maldata->txeob_irq, mal);
free_irq(maldata->rxde_irq, mal);
free_irq(maldata->rxeob_irq, mal);
- if (mal->tx_virt_addr)
- dma_free_coherent(&ocpdev->dev,
- MAL_DT_ALIGN * maldata->num_tx_chans,
- mal->tx_virt_addr, mal->tx_phys_addr);
+ mal_reset(mal);
- if (mal->rx_virt_addr)
- dma_free_coherent(&ocpdev->dev,
- MAL_DT_ALIGN * maldata->num_rx_chans,
- mal->rx_virt_addr, mal->rx_phys_addr);
+ mal_dbg_register(mal->def->index, NULL);
+
+ dma_free_coherent(&ocpdev->dev,
+ sizeof(struct mal_descriptor) *
+ (NUM_TX_BUFF * maldata->num_tx_chans +
+ NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
+ mal->bd_dma);
kfree(mal);
}
/* Structure for a device driver */
static struct ocp_device_id mal_ids[] = {
- {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL},
- {.vendor = OCP_VENDOR_INVALID}
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
+ { .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver mal_driver = {
@@ -441,23 +570,14 @@
.remove = mal_remove,
};
-static int __init init_mals(void)
+int __init mal_init(void)
{
- int rc;
-
- rc = ocp_register_driver(&mal_driver);
- if (rc < 0) {
- ocp_unregister_driver(&mal_driver);
- return -ENODEV;
- }
-
- return 0;
+ MAL_DBG(": init" NL);
+ return ocp_register_driver(&mal_driver);
}
-static void __exit exit_mals(void)
+void __exit mal_exit(void)
{
+ MAL_DBG(": exit" NL);
ocp_unregister_driver(&mal_driver);
}
-
-module_init(init_mals);
-module_exit(exit_mals);
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
index dd9f0da..15b0bda 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -1,131 +1,267 @@
-#ifndef _IBM_EMAC_MAL_H
-#define _IBM_EMAC_MAL_H
+/*
+ * drivers/net/ibm_emac/ibm_emac_mal.h
+ *
+ * Memory Access Layer (MAL) support
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_MAL_H_
+#define __IBM_EMAC_MAL_H_
+#include <linux/config.h>
+#include <linux/init.h>
#include <linux/list.h>
+#include <linux/netdevice.h>
-#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */
+#include <asm/io.h>
-#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan))
+/*
+ * These MAL "versions" probably aren't the real versions IBM uses for these
+ * MAL cores, I assigned them just to make #ifdefs in this file nicer and
+ * reflect the fact that 40x and 44x have slightly different MALs. --ebs
+ */
+#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_NP405H)
+#define MAL_VERSION 1
+#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#define MAL_VERSION 2
+#else
+#error "Unknown SoC, please check chip manual and choose MAL 'version'"
+#endif
+
+/* MALx DCR registers */
+#define MAL_CFG 0x00
+#define MAL_CFG_SR 0x80000000
+#define MAL_CFG_PLBB 0x00004000
+#define MAL_CFG_OPBBL 0x00000080
+#define MAL_CFG_EOPIE 0x00000004
+#define MAL_CFG_LEA 0x00000002
+#define MAL_CFG_SD 0x00000001
+#if MAL_VERSION == 1
+#define MAL_CFG_PLBP_MASK 0x00c00000
+#define MAL_CFG_PLBP_10 0x00800000
+#define MAL_CFG_GA 0x00200000
+#define MAL_CFG_OA 0x00100000
+#define MAL_CFG_PLBLE 0x00080000
+#define MAL_CFG_PLBT_MASK 0x00078000
+#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
+#elif MAL_VERSION == 2
+#define MAL_CFG_RPP_MASK 0x00c00000
+#define MAL_CFG_RPP_10 0x00800000
+#define MAL_CFG_RMBS_MASK 0x00300000
+#define MAL_CFG_WPP_MASK 0x000c0000
+#define MAL_CFG_WPP_10 0x00080000
+#define MAL_CFG_WMBS_MASK 0x00030000
+#define MAL_CFG_PLBLE 0x00008000
+#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
+ MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_ESR 0x01
+#define MAL_ESR_EVB 0x80000000
+#define MAL_ESR_CIDT 0x40000000
+#define MAL_ESR_CID_MASK 0x3e000000
+#define MAL_ESR_CID_SHIFT 25
+#define MAL_ESR_DE 0x00100000
+#define MAL_ESR_OTE 0x00040000
+#define MAL_ESR_OSE 0x00020000
+#define MAL_ESR_PEIN 0x00010000
+#define MAL_ESR_DEI 0x00000010
+#define MAL_ESR_OTEI 0x00000004
+#define MAL_ESR_OSEI 0x00000002
+#define MAL_ESR_PBEI 0x00000001
+#if MAL_VERSION == 1
+#define MAL_ESR_ONE 0x00080000
+#define MAL_ESR_ONEI 0x00000008
+#elif MAL_VERSION == 2
+#define MAL_ESR_PTE 0x00800000
+#define MAL_ESR_PRE 0x00400000
+#define MAL_ESR_PWE 0x00200000
+#define MAL_ESR_PTEI 0x00000080
+#define MAL_ESR_PREI 0x00000040
+#define MAL_ESR_PWEI 0x00000020
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_IER 0x02
+#define MAL_IER_DE 0x00000010
+#define MAL_IER_OTE 0x00000004
+#define MAL_IER_OE 0x00000002
+#define MAL_IER_PE 0x00000001
+#if MAL_VERSION == 1
+#define MAL_IER_NWE 0x00000008
+#define MAL_IER_SOC_EVENTS MAL_IER_NWE
+#elif MAL_VERSION == 2
+#define MAL_IER_PT 0x00000080
+#define MAL_IER_PRE 0x00000040
+#define MAL_IER_PWE 0x00000020
+#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
+#else
+#error "Unknown MAL version"
+#endif
+#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
+ MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
+
+#define MAL_TXCASR 0x04
+#define MAL_TXCARR 0x05
+#define MAL_TXEOBISR 0x06
+#define MAL_TXDEIR 0x07
+#define MAL_RXCASR 0x10
+#define MAL_RXCARR 0x11
+#define MAL_RXEOBISR 0x12
+#define MAL_RXDEIR 0x13
+#define MAL_TXCTPR(n) ((n) + 0x20)
+#define MAL_RXCTPR(n) ((n) + 0x40)
+#define MAL_RCBS(n) ((n) + 0x60)
+
+/* In reality MAL can handle TX buffers up to 4095 bytes long,
+ * but this isn't a good round number :) --ebs
+ */
+#define MAL_MAX_TX_SIZE 4080
+#define MAL_MAX_RX_SIZE 4080
+
+static inline int mal_rx_size(int len)
+{
+ len = (len + 0xf) & ~0xf;
+ return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
+}
+
+static inline int mal_tx_chunks(int len)
+{
+ return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
+}
+
+#define MAL_CHAN_MASK(n) (0x80000000 >> (n))
/* MAL Buffer Descriptor structure */
struct mal_descriptor {
- unsigned short ctrl; /* MAL / Commac status control bits */
- short data_len; /* Max length is 4K-1 (12 bits) */
- unsigned char *data_ptr; /* pointer to actual data buffer */
-} __attribute__ ((packed));
+ u16 ctrl; /* MAL / Commac status control bits */
+ u16 data_len; /* Max length is 4K-1 (12 bits) */
+ u32 data_ptr; /* pointer to actual data buffer */
+};
/* the following defines are for the MadMAL status and control registers. */
/* MADMAL transmit and receive status/control bits */
-#define MAL_RX_CTRL_EMPTY 0x8000
-#define MAL_RX_CTRL_WRAP 0x4000
-#define MAL_RX_CTRL_CM 0x2000
-#define MAL_RX_CTRL_LAST 0x1000
-#define MAL_RX_CTRL_FIRST 0x0800
-#define MAL_RX_CTRL_INTR 0x0400
+#define MAL_RX_CTRL_EMPTY 0x8000
+#define MAL_RX_CTRL_WRAP 0x4000
+#define MAL_RX_CTRL_CM 0x2000
+#define MAL_RX_CTRL_LAST 0x1000
+#define MAL_RX_CTRL_FIRST 0x0800
+#define MAL_RX_CTRL_INTR 0x0400
+#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
+#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
-#define MAL_TX_CTRL_READY 0x8000
-#define MAL_TX_CTRL_WRAP 0x4000
-#define MAL_TX_CTRL_CM 0x2000
-#define MAL_TX_CTRL_LAST 0x1000
-#define MAL_TX_CTRL_INTR 0x0400
+#define MAL_TX_CTRL_READY 0x8000
+#define MAL_TX_CTRL_WRAP 0x4000
+#define MAL_TX_CTRL_CM 0x2000
+#define MAL_TX_CTRL_LAST 0x1000
+#define MAL_TX_CTRL_INTR 0x0400
struct mal_commac_ops {
- void (*txeob) (void *dev, u32 chanmask);
- void (*txde) (void *dev, u32 chanmask);
- void (*rxeob) (void *dev, u32 chanmask);
- void (*rxde) (void *dev, u32 chanmask);
+ void (*poll_tx) (void *dev);
+ int (*poll_rx) (void *dev, int budget);
+ int (*peek_rx) (void *dev);
+ void (*rxde) (void *dev);
};
struct mal_commac {
- struct mal_commac_ops *ops;
- void *dev;
- u32 tx_chan_mask, rx_chan_mask;
- struct list_head list;
+ struct mal_commac_ops *ops;
+ void *dev;
+ struct list_head poll_list;
+ int rx_stopped;
+
+ u32 tx_chan_mask;
+ u32 rx_chan_mask;
+ struct list_head list;
};
struct ibm_ocp_mal {
- int dcrbase;
+ int dcrbase;
- struct list_head commac;
- u32 tx_chan_mask, rx_chan_mask;
+ struct list_head poll_list;
+ struct net_device poll_dev;
- dma_addr_t tx_phys_addr;
- struct mal_descriptor *tx_virt_addr;
+ struct list_head list;
+ u32 tx_chan_mask;
+ u32 rx_chan_mask;
- dma_addr_t rx_phys_addr;
- struct mal_descriptor *rx_virt_addr;
+ dma_addr_t bd_dma;
+ struct mal_descriptor *bd_virt;
+
+ struct ocp_def *def;
};
-#define GET_MAL_STANZA(base,dcrn) \
- case base: \
- x = mfdcr(dcrn(base)); \
- break;
-
-#define SET_MAL_STANZA(base,dcrn, val) \
- case base: \
- mtdcr(dcrn(base), (val)); \
- break;
-
-#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn)
-#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val)
-
-#ifdef DCRN_MAL1_BASE
-#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn)
-#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val)
-#else /* ! DCRN_MAL1_BASE */
-#define GET_MAL1_STANZA(dcrn)
-#define SET_MAL1_STANZA(dcrn,val)
-#endif
-
-#define get_mal_dcrn(mal, dcrn) ({ \
- u32 x; \
- switch ((mal)->dcrbase) { \
- GET_MAL0_STANZA(dcrn) \
- GET_MAL1_STANZA(dcrn) \
- default: \
- x = 0; \
- BUG(); \
- } \
-x; })
-
-#define set_mal_dcrn(mal, dcrn, val) do { \
- switch ((mal)->dcrbase) { \
- SET_MAL0_STANZA(dcrn,val) \
- SET_MAL1_STANZA(dcrn,val) \
- default: \
- BUG(); \
- } } while (0)
-
-static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
+static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
{
- set_mal_dcrn(mal, DCRN_MALTXCASR,
- get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask);
+ return mfdcr(mal->dcrbase + reg);
}
-static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal,
- u32 chanmask)
+static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
{
- set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask);
+ mtdcr(mal->dcrbase + reg, val);
}
-static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
-{
- set_mal_dcrn(mal, DCRN_MALRXCASR,
- get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask);
-}
+/* Register MAL devices */
+int mal_init(void) __init;
+void mal_exit(void) __exit;
-static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal,
- u32 chanmask)
-{
- set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask);
-}
+int mal_register_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac) __init;
+void mal_unregister_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac) __exit;
+int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
-extern int mal_register_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac);
-extern int mal_unregister_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac);
+/* Returns BD ring offset for a particular channel
+ (in 'struct mal_descriptor' elements)
+*/
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel,
- unsigned long size);
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-#endif /* _IBM_EMAC_MAL_H */
+/* Add/remove EMAC to/from MAL polling list */
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+
+/* Ethtool MAL registers */
+struct ibm_mal_regs {
+ u32 tx_count;
+ u32 rx_count;
+
+ u32 cfg;
+ u32 esr;
+ u32 ier;
+ u32 tx_casr;
+ u32 tx_carr;
+ u32 tx_eobisr;
+ u32 tx_deir;
+ u32 rx_casr;
+ u32 rx_carr;
+ u32 rx_eobisr;
+ u32 rx_deir;
+ u32 tx_ctpr[32];
+ u32 rx_ctpr[32];
+ u32 rcbs[32];
+};
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal);
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
+
+#endif /* __IBM_EMAC_MAL_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
index 14213f0..a27e49c 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ b/drivers/net/ibm_emac/ibm_emac_phy.c
@@ -1,61 +1,256 @@
/*
- * ibm_ocp_phy.c
+ * drivers/net/ibm_emac/ibm_emac_phy.c
*
- * PHY drivers for the ibm ocp ethernet driver. Borrowed
- * from sungem_phy.c, though I only kept the generic MII
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
+ * Borrowed from sungem_phy.c, though I only kept the generic MII
* driver for now.
*
* This file should be shared with other drivers or eventually
* merged as the "low level" part of miilib
*
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
*
*/
-
#include <linux/config.h>
-
#include <linux/module.h>
-
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
+#include <asm/ocp.h>
+
#include "ibm_emac_phy.h"
-static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
+static inline int phy_read(struct mii_phy *phy, int reg)
{
- u16 val;
+ return phy->mdio_read(phy->dev, phy->address, reg);
+}
+
+static inline void phy_write(struct mii_phy *phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->address, reg, val);
+}
+
+int mii_reset_phy(struct mii_phy *phy)
+{
+ int val;
int limit = 10000;
- val = __phy_read(phy, phy_id, MII_BMCR);
+ val = phy_read(phy, MII_BMCR);
val &= ~BMCR_ISOLATE;
val |= BMCR_RESET;
- __phy_write(phy, phy_id, MII_BMCR, val);
+ phy_write(phy, MII_BMCR, val);
- udelay(100);
+ udelay(300);
while (limit--) {
- val = __phy_read(phy, phy_id, MII_BMCR);
- if ((val & BMCR_RESET) == 0)
+ val = phy_read(phy, MII_BMCR);
+ if (val >= 0 && (val & BMCR_RESET) == 0)
break;
udelay(10);
}
if ((val & BMCR_ISOLATE) && limit > 0)
- __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+ phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
- return (limit <= 0);
+ return limit <= 0;
}
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ int ctl, adv;
+
+ phy->autoneg = AUTONEG_ENABLE;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ adv = phy_read(phy, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if (advertise & ADVERTISED_1000baseT_Full)
+ adv |= ADVERTISE_1000FULL;
+ if (advertise & ADVERTISED_1000baseT_Half)
+ adv |= ADVERTISE_1000HALF;
+ phy_write(phy, MII_CTRL1000, adv);
+ }
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ int ctl;
+
+ phy->autoneg = AUTONEG_DISABLE;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = phy->asym_pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
+
+ /* First reset the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch (speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ ctl |= BMCR_SPEED1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+ int status;
+
+ /* Clear latched value with dummy read */
+ phy_read(phy, MII_BMSR);
+ status = phy_read(phy, MII_BMSR);
+ if (status < 0 || (status & BMSR_LSTATUS) == 0)
+ return 0;
+ if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
+ return 0;
+ return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+ if (phy->autoneg == AUTONEG_ENABLE) {
+ int glpa = 0;
+ int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+ if (lpa < 0)
+ return lpa;
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ int adv = phy_read(phy, MII_CTRL1000);
+ glpa = phy_read(phy, MII_STAT1000);
+
+ if (glpa < 0 || adv < 0)
+ return adv;
+
+ glpa &= adv << 2;
+ }
+
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+
+ if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
+ phy->speed = SPEED_1000;
+ if (glpa & LPA_1000FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phy->speed = SPEED_100;
+ if (lpa & LPA_100FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & LPA_10FULL)
+ phy->duplex = DUPLEX_FULL;
+
+ if (phy->duplex == DUPLEX_FULL) {
+ phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phy, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ phy->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+
+ phy->pause = phy->asym_pause = 0;
+ }
+ return 0;
+}
+
+/* Generic implementation for most 10/100/1000 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .ops = &generic_phy_ops
+};
+
+/* CIS8201 */
+#define MII_CIS8201_EPCR 0x17
+#define EPCR_MODE_MASK 0x3000
+#define EPCR_GMII_MODE 0x0000
+#define EPCR_RGMII_MODE 0x1000
+#define EPCR_TBI_MODE 0x2000
+#define EPCR_RTBI_MODE 0x3000
+
static int cis8201_init(struct mii_phy *phy)
{
- u16 epcr;
+ int epcr;
epcr = phy_read(phy, MII_CIS8201_EPCR);
+ if (epcr < 0)
+ return epcr;
+
epcr &= ~EPCR_MODE_MASK;
switch (phy->mode) {
@@ -78,178 +273,19 @@
return 0;
}
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
-
- /* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
-
- /* Select speed & duplex */
- switch (speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- default:
- return -EINVAL;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
- u16 status;
-
- (void)phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- return 0;
- if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return 0;
- return 1;
-}
-
-#define MII_CIS8201_ACSR 0x1c
-#define ACSR_DUPLEX_STATUS 0x0020
-#define ACSR_SPEED_1000BASET 0x0010
-#define ACSR_SPEED_100BASET 0x0008
-
-static int cis8201_read_link(struct mii_phy *phy)
-{
- u16 acsr;
-
- if (phy->autoneg) {
- acsr = phy_read(phy, MII_CIS8201_ACSR);
-
- if (acsr & ACSR_DUPLEX_STATUS)
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- if (acsr & ACSR_SPEED_1000BASET) {
- phy->speed = SPEED_1000;
- } else if (acsr & ACSR_SPEED_100BASET)
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
- phy->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
- u16 lpa;
-
- if (phy->autoneg) {
- lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
-
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
-
- if (lpa & (LPA_100FULL | LPA_100HALF)) {
- phy->speed = SPEED_100;
- if (lpa & LPA_100FULL)
- phy->duplex = DUPLEX_FULL;
- } else if (lpa & LPA_10FULL)
- phy->duplex = DUPLEX_FULL;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
-
-/* CIS8201 phy ops */
static struct mii_phy_ops cis8201_phy_ops = {
- init:cis8201_init,
- setup_aneg:genmii_setup_aneg,
- setup_forced:genmii_setup_forced,
- poll_link:genmii_poll_link,
- read_link:cis8201_read_link
-};
-
-/* Generic implementation for most 10/100 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
- setup_aneg:genmii_setup_aneg,
- setup_forced:genmii_setup_forced,
- poll_link:genmii_poll_link,
- read_link:genmii_read_link
+ .init = cis8201_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
};
static struct mii_phy_def cis8201_phy_def = {
- phy_id:0x000fc410,
- phy_id_mask:0x000ffff0,
- name:"CIS8201 Gigabit Ethernet",
- features:MII_GBIT_FEATURES,
- magic_aneg:0,
- ops:&cis8201_phy_ops
-};
-
-static struct mii_phy_def genmii_phy_def = {
- phy_id:0x00000000,
- phy_id_mask:0x00000000,
- name:"Generic MII",
- features:MII_BASIC_FEATURES,
- magic_aneg:0,
- ops:&generic_phy_ops
+ .phy_id = 0x000fc410,
+ .phy_id_mask = 0x000ffff0,
+ .name = "CIS8201 Gigabit Ethernet",
+ .ops = &cis8201_phy_ops
};
static struct mii_phy_def *mii_phy_table[] = {
@@ -258,39 +294,60 @@
NULL
};
-int mii_phy_probe(struct mii_phy *phy, int mii_id)
+int mii_phy_probe(struct mii_phy *phy, int address)
{
- int rc;
- u32 id;
struct mii_phy_def *def;
int i;
+ u32 id;
- phy->autoneg = 0;
+ phy->autoneg = AUTONEG_DISABLE;
phy->advertising = 0;
- phy->mii_id = mii_id;
- phy->speed = 0;
- phy->duplex = 0;
- phy->pause = 0;
+ phy->address = address;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
- /* Take PHY out of isloate mode and reset it. */
- rc = reset_one_mii_phy(phy, mii_id);
- if (rc)
+ /* Take PHY out of isolate mode and reset it. */
+ if (mii_reset_phy(phy))
return -ENODEV;
/* Read ID and find matching entry */
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
- & 0xfffffff0;
+ id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;
/* Should never be NULL (we have a generic entry), but... */
- if (def == NULL)
+ if (!def)
return -ENODEV;
phy->def = def;
+ /* Determine PHY features if needed */
+ phy->features = def->features;
+ if (!phy->features) {
+ u16 bmsr = phy_read(phy, MII_BMSR);
+ if (bmsr & BMSR_ANEGCAPABLE)
+ phy->features |= SUPPORTED_Autoneg;
+ if (bmsr & BMSR_10HALF)
+ phy->features |= SUPPORTED_10baseT_Half;
+ if (bmsr & BMSR_10FULL)
+ phy->features |= SUPPORTED_10baseT_Full;
+ if (bmsr & BMSR_100HALF)
+ phy->features |= SUPPORTED_100baseT_Half;
+ if (bmsr & BMSR_100FULL)
+ phy->features |= SUPPORTED_100baseT_Full;
+ if (bmsr & BMSR_ESTATEN) {
+ u16 esr = phy_read(phy, MII_ESTATUS);
+ if (esr & ESTATUS_1000_TFULL)
+ phy->features |= SUPPORTED_1000baseT_Full;
+ if (esr & ESTATUS_1000_THALF)
+ phy->features |= SUPPORTED_1000baseT_Half;
+ }
+ phy->features |= SUPPORTED_MII;
+ }
+
/* Setup default advertising */
- phy->advertising = def->features;
+ phy->advertising = phy->features;
return 0;
}
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
index 61afbea..a70e0fe 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ b/drivers/net/ibm_emac/ibm_emac_phy.h
@@ -1,65 +1,25 @@
-
/*
- * ibm_emac_phy.h
+ * drivers/net/ibm_emac/ibm_emac_phy.h
*
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
*
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * February 2003
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * February 2003
+ *
+ * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
* This file basically duplicates sungem_phy.{c,h} with different PHYs
* supported. I'm looking into merging that in a single mii layer more
* flexible than mii.c
*/
-#ifndef _IBM_EMAC_PHY_H_
-#define _IBM_EMAC_PHY_H_
-
-/*
- * PHY mode settings
- * Used for multi-mode capable PHYs
- */
-#define PHY_MODE_NA 0
-#define PHY_MODE_MII 1
-#define PHY_MODE_RMII 2
-#define PHY_MODE_SMII 3
-#define PHY_MODE_RGMII 4
-#define PHY_MODE_TBI 5
-#define PHY_MODE_GMII 6
-#define PHY_MODE_RTBI 7
-#define PHY_MODE_SGMII 8
-
-/*
- * PHY specific registers/values
- */
-
-/* CIS8201 */
-#define MII_CIS8201_EPCR 0x17
-#define EPCR_MODE_MASK 0x3000
-#define EPCR_GMII_MODE 0x0000
-#define EPCR_RGMII_MODE 0x1000
-#define EPCR_TBI_MODE 0x2000
-#define EPCR_RTBI_MODE 0x3000
+#ifndef _IBM_OCP_PHY_H_
+#define _IBM_OCP_PHY_H_
struct mii_phy;
@@ -77,7 +37,8 @@
struct mii_phy_def {
u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
u32 phy_id_mask; /* Significant bits */
- u32 features; /* Ethtool SUPPORTED_* defines */
+ u32 features; /* Ethtool SUPPORTED_* defines or
+ 0 for autodetect */
int magic_aneg; /* Autoneg does all speed test for us */
const char *name;
const struct mii_phy_ops *ops;
@@ -86,8 +47,11 @@
/* An instance of a PHY, partially borrowed from mii_if_info */
struct mii_phy {
struct mii_phy_def *def;
- int advertising;
- int mii_id;
+ u32 advertising; /* Ethtool ADVERTISED_* defines */
+ u32 features; /* Copied from mii_phy_def.features
+ or determined automaticaly */
+ int address; /* PHY address */
+ int mode; /* PHY mode */
/* 1: autoneg enabled, 0: disabled */
int autoneg;
@@ -98,40 +62,19 @@
int speed;
int duplex;
int pause;
-
- /* PHY mode - if needed */
- int mode;
+ int asym_pause;
/* Provided by host chip */
struct net_device *dev;
- int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
- void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
+ int (*mdio_read) (struct net_device * dev, int addr, int reg);
+ void (*mdio_write) (struct net_device * dev, int addr, int reg,
int val);
};
/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
* filled, the remaining fields will be filled on return
*/
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
+int mii_phy_probe(struct mii_phy *phy, int address);
+int mii_reset_phy(struct mii_phy *phy);
-static inline int __phy_read(struct mii_phy *phy, int id, int reg)
-{
- return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
-{
- phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
- return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
- phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
-
-#endif /* _IBM_EMAC_PHY_H_ */
+#endif /* _IBM_OCP_PHY_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c
new file mode 100644
index 0000000..f0b1ffb
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c
@@ -0,0 +1,201 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* RGMIIx_FER */
+#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4))
+#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4))
+#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4))
+#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4))
+#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4))
+
+/* RGMIIx_SSR */
+#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8))
+#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8))
+#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8))
+
+/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
+static inline int rgmii_valid_mode(int phy_mode)
+{
+ return phy_mode == PHY_MODE_GMII ||
+ phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline const char *rgmii_mode_name(int mode)
+{
+ switch (mode) {
+ case PHY_MODE_RGMII:
+ return "RGMII";
+ case PHY_MODE_TBI:
+ return "TBI";
+ case PHY_MODE_GMII:
+ return "GMII";
+ case PHY_MODE_RTBI:
+ return "RTBI";
+ default:
+ BUG();
+ }
+}
+
+static inline u32 rgmii_mode_mask(int mode, int input)
+{
+ switch (mode) {
+ case PHY_MODE_RGMII:
+ return RGMII_FER_RGMII(input);
+ case PHY_MODE_TBI:
+ return RGMII_FER_TBI(input);
+ case PHY_MODE_GMII:
+ return RGMII_FER_GMII(input);
+ case PHY_MODE_RTBI:
+ return RGMII_FER_RTBI(input);
+ default:
+ BUG();
+ }
+}
+
+static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ struct rgmii_regs *p;
+
+ RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
+
+ if (!dev) {
+ dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "rgmii%d: couldn't allocate device structure!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+
+ p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
+ sizeof(struct rgmii_regs));
+ if (!p) {
+ printk(KERN_ERR
+ "rgmii%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ kfree(dev);
+ return -ENOMEM;
+ }
+
+ dev->base = p;
+ ocp_set_drvdata(ocpdev, dev);
+
+ /* Disable all inputs by default */
+ out_be32(&p->fer, 0);
+ } else
+ p = dev->base;
+
+ /* Enable this input */
+ out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
+
+ printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
+ ocpdev->def->index, input, rgmii_mode_name(mode));
+
+ ++dev->users;
+ return 0;
+}
+
+int __init rgmii_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ /* Check if we need to attach to a RGMII */
+ if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
+ dev->rgmii_input = emacdata->rgmii_mux;
+ dev->rgmii_dev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
+ emacdata->rgmii_idx);
+ if (!dev->rgmii_dev) {
+ printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
+ dev->def->index, emacdata->rgmii_idx);
+ return -ENODEV;
+ }
+ if (rgmii_init
+ (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
+ printk(KERN_ERR
+ "emac%d: rgmii%d initialization failed!\n",
+ dev->def->index, emacdata->rgmii_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
+
+ RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+ if (speed == SPEED_1000)
+ ssr |= RGMII_SSR_1000(input);
+ else if (speed == SPEED_100)
+ ssr |= RGMII_SSR_100(input);
+
+ out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ BUG_ON(!dev || dev->users == 0);
+
+ RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+ /* Disable this input */
+ out_be32(&dev->base->fer,
+ in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
+
+ if (!--dev->users) {
+ /* Free everything if this is the last user */
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)dev->base);
+ kfree(dev);
+ }
+}
+
+int __rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct rgmii_regs);
+}
+
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
index 49f188f..a1ffb8a 100644
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h
@@ -1,5 +1,7 @@
/*
- * Defines for the IBM RGMII bridge
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
* Based on ocp_zmii.h/ibm_emac_zmii.h
* Armin Kuster akuster@mvista.com
@@ -7,6 +9,9 @@
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -19,47 +24,42 @@
#include <linux/config.h>
/* RGMII bridge */
-typedef struct rgmii_regs {
+struct rgmii_regs {
u32 fer; /* Function enable register */
u32 ssr; /* Speed select register */
-} rgmii_t;
-
-#define RGMII_INPUTS 4
+};
/* RGMII device */
struct ibm_ocp_rgmii {
struct rgmii_regs *base;
- int mode[RGMII_INPUTS];
int users; /* number of EMACs using this RGMII bridge */
};
-/* Fuctional Enable Reg */
-#define RGMII_FER_MASK(x) (0x00000007 << (4*x))
-#define RGMII_RTBI 0x00000004
-#define RGMII_RGMII 0x00000005
-#define RGMII_TBI 0x00000006
-#define RGMII_GMII 0x00000007
+#ifdef CONFIG_IBM_EMAC_RGMII
+int rgmii_attach(void *emac) __init;
-/* Speed Selection reg */
+void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __rgmii_fini(ocpdev, input);
+}
-#define RGMII_SP2_100 0x00000002
-#define RGMII_SP2_1000 0x00000004
-#define RGMII_SP3_100 0x00000200
-#define RGMII_SP3_1000 0x00000400
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-#define RGMII_MII2_SPDMASK 0x00000007
-#define RGMII_MII3_SPDMASK 0x00000700
+int __rgmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
+}
-#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000
-#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100
-#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000)
-#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000
-#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100
-#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000)
-
-#define RTBI 0
-#define RGMII 1
-#define TBI 2
-#define GMII 3
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define rgmii_attach(x) 0
+# define rgmii_fini(x,y) ((void)0)
+# define rgmii_set_speed(x,y,z) ((void)0)
+# define rgmii_get_regs_len(x) 0
+# define rgmii_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_RGMII */
#endif /* _IBM_EMAC_RGMII_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c
new file mode 100644
index 0000000..af08afc
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_tah.c
@@ -0,0 +1,111 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_tah.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
+ *
+ * Copyright 2004 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+
+static int __init tah_init(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p;
+
+ if (ocp_get_drvdata(ocpdev)) {
+ printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
+ return -EBUSY;
+ }
+
+ /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
+ p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
+ if (!p) {
+ printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ ocp_set_drvdata(ocpdev, p);
+ __tah_reset(ocpdev);
+
+ return 0;
+}
+
+int __init tah_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ /* Check if we need to attach to a TAH */
+ if (emacdata->tah_idx >= 0) {
+ dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
+ emacdata->tah_idx);
+ if (!dev->tah_dev) {
+ printk(KERN_ERR "emac%d: unknown tah%d!\n",
+ dev->def->index, emacdata->tah_idx);
+ return -ENODEV;
+ }
+ if (tah_init(dev->tah_dev)) {
+ printk(KERN_ERR
+ "emac%d: tah%d initialization failed!\n",
+ dev->def->index, emacdata->tah_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void __exit __tah_fini(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p = ocp_get_drvdata(ocpdev);
+ BUG_ON(!p);
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)p);
+}
+
+void __tah_reset(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p = ocp_get_drvdata(ocpdev);
+ int n;
+
+ /* Reset TAH */
+ out_be32(&p->mr, TAH_MR_SR);
+ n = 100;
+ while ((in_be32(&p->mr) & TAH_MR_SR) && n)
+ --n;
+
+ if (unlikely(!n))
+ printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
+
+ /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+ out_be32(&p->mr,
+ TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
+ TAH_MR_DIG);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct tah_regs);
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct tah_regs *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev, sizeof(struct tah_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h
index ecfc698..9299b5d 100644
--- a/drivers/net/ibm_emac/ibm_emac_tah.h
+++ b/drivers/net/ibm_emac/ibm_emac_tah.h
@@ -1,9 +1,13 @@
/*
- * Defines for the IBM TAH
+ * drivers/net/ibm_emac/ibm_emac_tah.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -13,36 +17,72 @@
#ifndef _IBM_EMAC_TAH_H
#define _IBM_EMAC_TAH_H
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+
/* TAH */
-typedef struct tah_regs {
- u32 tah_revid;
+struct tah_regs {
+ u32 revid;
u32 pad[3];
- u32 tah_mr;
- u32 tah_ssr0;
- u32 tah_ssr1;
- u32 tah_ssr2;
- u32 tah_ssr3;
- u32 tah_ssr4;
- u32 tah_ssr5;
- u32 tah_tsr;
-} tah_t;
+ u32 mr;
+ u32 ssr0;
+ u32 ssr1;
+ u32 ssr2;
+ u32 ssr3;
+ u32 ssr4;
+ u32 ssr5;
+ u32 tsr;
+};
/* TAH engine */
-#define TAH_MR_CVR 0x80000000
-#define TAH_MR_SR 0x40000000
-#define TAH_MR_ST_256 0x01000000
-#define TAH_MR_ST_512 0x02000000
-#define TAH_MR_ST_768 0x03000000
-#define TAH_MR_ST_1024 0x04000000
-#define TAH_MR_ST_1280 0x05000000
-#define TAH_MR_ST_1536 0x06000000
-#define TAH_MR_TFS_16KB 0x00000000
-#define TAH_MR_TFS_2KB 0x00200000
-#define TAH_MR_TFS_4KB 0x00400000
-#define TAH_MR_TFS_6KB 0x00600000
-#define TAH_MR_TFS_8KB 0x00800000
-#define TAH_MR_TFS_10KB 0x00a00000
-#define TAH_MR_DTFP 0x00100000
-#define TAH_MR_DIG 0x00080000
+#define TAH_MR_CVR 0x80000000
+#define TAH_MR_SR 0x40000000
+#define TAH_MR_ST_256 0x01000000
+#define TAH_MR_ST_512 0x02000000
+#define TAH_MR_ST_768 0x03000000
+#define TAH_MR_ST_1024 0x04000000
+#define TAH_MR_ST_1280 0x05000000
+#define TAH_MR_ST_1536 0x06000000
+#define TAH_MR_TFS_16KB 0x00000000
+#define TAH_MR_TFS_2KB 0x00200000
+#define TAH_MR_TFS_4KB 0x00400000
+#define TAH_MR_TFS_6KB 0x00600000
+#define TAH_MR_TFS_8KB 0x00800000
+#define TAH_MR_TFS_10KB 0x00a00000
+#define TAH_MR_DTFP 0x00100000
+#define TAH_MR_DIG 0x00080000
+
+#ifdef CONFIG_IBM_EMAC_TAH
+int tah_attach(void *emac) __init;
+
+void __tah_fini(struct ocp_device *ocpdev) __exit;
+static inline void tah_fini(struct ocp_device *ocpdev)
+{
+ if (ocpdev)
+ __tah_fini(ocpdev);
+}
+
+void __tah_reset(struct ocp_device *ocpdev);
+static inline void tah_reset(struct ocp_device *ocpdev)
+{
+ if (ocpdev)
+ __tah_reset(ocpdev);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev);
+static inline int tah_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define tah_attach(x) 0
+# define tah_fini(x) ((void)0)
+# define tah_reset(x) ((void)0)
+# define tah_get_regs_len(x) 0
+# define tah_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_TAH */
#endif /* _IBM_EMAC_TAH_H */
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
new file mode 100644
index 0000000..35c1185
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.c
@@ -0,0 +1,255 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_zmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* ZMIIx_FER */
+#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
+#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
+ ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
+
+#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
+#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
+#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
+
+/* ZMIIx_SSR */
+#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
+#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
+#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
+
+/* ZMII only supports MII, RMII and SMII
+ * we also support autodetection for backward compatibility
+ */
+static inline int zmii_valid_mode(int mode)
+{
+ return mode == PHY_MODE_MII ||
+ mode == PHY_MODE_RMII ||
+ mode == PHY_MODE_SMII ||
+ mode == PHY_MODE_NA;
+}
+
+static inline const char *zmii_mode_name(int mode)
+{
+ switch (mode) {
+ case PHY_MODE_MII:
+ return "MII";
+ case PHY_MODE_RMII:
+ return "RMII";
+ case PHY_MODE_SMII:
+ return "SMII";
+ default:
+ BUG();
+ }
+}
+
+static inline u32 zmii_mode_mask(int mode, int input)
+{
+ switch (mode) {
+ case PHY_MODE_MII:
+ return ZMII_FER_MII(input);
+ case PHY_MODE_RMII:
+ return ZMII_FER_RMII(input);
+ case PHY_MODE_SMII:
+ return ZMII_FER_SMII(input);
+ default:
+ return 0;
+ }
+}
+
+static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ struct zmii_regs *p;
+
+ ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
+
+ if (!dev) {
+ dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "zmii%d: couldn't allocate device structure!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ dev->mode = PHY_MODE_NA;
+
+ p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
+ sizeof(struct zmii_regs));
+ if (!p) {
+ printk(KERN_ERR
+ "zmii%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ kfree(dev);
+ return -ENOMEM;
+ }
+ dev->base = p;
+ ocp_set_drvdata(ocpdev, dev);
+
+ /* We may need FER value for autodetection later */
+ dev->fer_save = in_be32(&p->fer);
+
+ /* Disable all inputs by default */
+ out_be32(&p->fer, 0);
+ } else
+ p = dev->base;
+
+ if (!zmii_valid_mode(*mode)) {
+ /* Probably an EMAC connected to RGMII,
+ * but it still may need ZMII for MDIO
+ */
+ goto out;
+ }
+
+ /* Autodetect ZMII mode if not specified.
+ * This is only for backward compatibility with the old driver.
+ * Please, always specify PHY mode in your board port to avoid
+ * any surprises.
+ */
+ if (dev->mode == PHY_MODE_NA) {
+ if (*mode == PHY_MODE_NA) {
+ u32 r = dev->fer_save;
+
+ ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
+ ocpdev->def->index, r);
+
+ if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
+ dev->mode = PHY_MODE_MII;
+ else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
+ dev->mode = PHY_MODE_RMII;
+ else
+ dev->mode = PHY_MODE_SMII;
+ } else
+ dev->mode = *mode;
+
+ printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
+ ocpdev->def->index, zmii_mode_name(dev->mode));
+ } else {
+ /* All inputs must use the same mode */
+ if (*mode != PHY_MODE_NA && *mode != dev->mode) {
+ printk(KERN_ERR
+ "zmii%d: invalid mode %d specified for input %d\n",
+ ocpdev->def->index, *mode, input);
+ return -EINVAL;
+ }
+ }
+
+ /* Report back correct PHY mode,
+ * it may be used during PHY initialization.
+ */
+ *mode = dev->mode;
+
+ /* Enable this input */
+ out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
+ out:
+ ++dev->users;
+ return 0;
+}
+
+int __init zmii_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ if (emacdata->zmii_idx >= 0) {
+ dev->zmii_input = emacdata->zmii_mux;
+ dev->zmii_dev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
+ emacdata->zmii_idx);
+ if (!dev->zmii_dev) {
+ printk(KERN_ERR "emac%d: unknown zmii%d!\n",
+ dev->def->index, emacdata->zmii_idx);
+ return -ENODEV;
+ }
+ if (zmii_init
+ (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
+ printk(KERN_ERR
+ "emac%d: zmii%d initialization failed!\n",
+ dev->def->index, emacdata->zmii_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
+
+ ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
+
+ out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
+}
+
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ u32 ssr = in_be32(&dev->base->ssr);
+
+ ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+ if (speed == SPEED_100)
+ ssr |= ZMII_SSR_SP(input);
+ else
+ ssr &= ~ZMII_SSR_SP(input);
+
+ out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __zmii_fini(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ BUG_ON(!dev || dev->users == 0);
+
+ ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+ /* Disable this input */
+ out_be32(&dev->base->fer,
+ in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
+
+ if (!--dev->users) {
+ /* Free everything if this is the last user */
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)dev->base);
+ kfree(dev);
+ }
+}
+
+int __zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct zmii_regs);
+}
+
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
index 6f6cd2a..0bb2606 100644
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.h
@@ -1,23 +1,27 @@
/*
- * ocp_zmii.h
+ * drivers/net/ibm_emac/ibm_emac_zmii.h
*
- * Defines for the IBM ZMII bridge
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
- * Armin Kuster akuster@mvista.com
- * Dec, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2001 MontaVista Softare Inc.
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#ifndef _IBM_EMAC_ZMII_H_
#define _IBM_EMAC_ZMII_H_
#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
/* ZMII bridge registers */
struct zmii_regs {
@@ -26,68 +30,54 @@
u32 smiirs; /* SMII status reg */
};
-#define ZMII_INPUTS 4
-
/* ZMII device */
struct ibm_ocp_zmii {
struct zmii_regs *base;
- int mode[ZMII_INPUTS];
+ int mode; /* subset of PHY_MODE_XXXX */
int users; /* number of EMACs using this ZMII bridge */
+ u32 fer_save; /* FER value left by firmware */
};
-/* Fuctional Enable Reg */
+#ifdef CONFIG_IBM_EMAC_ZMII
+int zmii_attach(void *emac) __init;
-#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x))
+void __zmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void zmii_fini(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __zmii_fini(ocpdev, input);
+}
-#define ZMII_MDI0 0x80000000
-#define ZMII_SMII0 0x40000000
-#define ZMII_RMII0 0x20000000
-#define ZMII_MII0 0x10000000
-#define ZMII_MDI1 0x08000000
-#define ZMII_SMII1 0x04000000
-#define ZMII_RMII1 0x02000000
-#define ZMII_MII1 0x01000000
-#define ZMII_MDI2 0x00800000
-#define ZMII_SMII2 0x00400000
-#define ZMII_RMII2 0x00200000
-#define ZMII_MII2 0x00100000
-#define ZMII_MDI3 0x00080000
-#define ZMII_SMII3 0x00040000
-#define ZMII_RMII3 0x00020000
-#define ZMII_MII3 0x00010000
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
+static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __zmii_enable_mdio(ocpdev, input);
+}
-/* Speed Selection reg */
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
+static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
+ int speed)
+{
+ if (ocpdev)
+ __zmii_set_speed(ocpdev, input, speed);
+}
-#define ZMII_SCI0 0x40000000
-#define ZMII_FSS0 0x20000000
-#define ZMII_SP0 0x10000000
-#define ZMII_SCI1 0x04000000
-#define ZMII_FSS1 0x02000000
-#define ZMII_SP1 0x01000000
-#define ZMII_SCI2 0x00400000
-#define ZMII_FSS2 0x00200000
-#define ZMII_SP2 0x00100000
-#define ZMII_SCI3 0x00040000
-#define ZMII_FSS3 0x00020000
-#define ZMII_SP3 0x00010000
+int __zmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
+}
-#define ZMII_MII0_100MB ZMII_SP0
-#define ZMII_MII0_10MB ~ZMII_SP0
-#define ZMII_MII1_100MB ZMII_SP1
-#define ZMII_MII1_10MB ~ZMII_SP1
-#define ZMII_MII2_100MB ZMII_SP2
-#define ZMII_MII2_10MB ~ZMII_SP2
-#define ZMII_MII3_100MB ZMII_SP3
-#define ZMII_MII3_10MB ~ZMII_SP3
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-/* SMII Status reg */
-
-#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */
-#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */
-
-#define SMII 0
-#define RMII 1
-#define MII 2
-#define MDI 3
+#else
+# define zmii_attach(x) 0
+# define zmii_fini(x,y) ((void)0)
+# define zmii_enable_mdio(x,y) ((void)0)
+# define zmii_set_speed(x,y,z) ((void)0)
+# define zmii_get_regs_len(x) 0
+# define zmii_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_ZMII */
#endif /* _IBM_EMAC_ZMII_H_ */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index a2c4dd4..36da54a 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -96,7 +96,7 @@
static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter);
static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter);
static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
-static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*);
+static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter);
#ifdef CONFIG_PROC_FS
#define IBMVETH_PROC_DIR "net/ibmveth"
@@ -181,6 +181,7 @@
atomic_set(&pool->available, 0);
pool->producer_index = 0;
pool->consumer_index = 0;
+ pool->active = 0;
return 0;
}
@@ -236,7 +237,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
if(lpar_rc != H_Success) {
- pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
+ pool->free_map[free_index] = index;
pool->skbuff[index] = NULL;
pool->consumer_index--;
dma_unmap_single(&adapter->vdev->dev,
@@ -255,37 +256,19 @@
atomic_add(buffers_added, &(pool->available));
}
-/* check if replenishing is needed. */
-static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter)
-{
- return ((atomic_read(&adapter->rx_buff_pool[0].available) < adapter->rx_buff_pool[0].threshold) ||
- (atomic_read(&adapter->rx_buff_pool[1].available) < adapter->rx_buff_pool[1].threshold) ||
- (atomic_read(&adapter->rx_buff_pool[2].available) < adapter->rx_buff_pool[2].threshold));
-}
-
-/* kick the replenish tasklet if we need replenishing and it isn't already running */
-static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter)
-{
- if(ibmveth_is_replenishing_needed(adapter) &&
- (atomic_dec_if_positive(&adapter->not_replenishing) == 0)) {
- schedule_work(&adapter->replenish_task);
- }
-}
-
-/* replenish tasklet routine */
+/* replenish routine */
static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
{
+ int i;
+
adapter->replenish_task_cycles++;
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[0]);
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[1]);
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[2]);
+ for(i = 0; i < IbmVethNumBufferPools; i++)
+ if(adapter->rx_buff_pool[i].active)
+ ibmveth_replenish_buffer_pool(adapter,
+ &adapter->rx_buff_pool[i]);
adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
-
- atomic_inc(&adapter->not_replenishing);
-
- ibmveth_schedule_replenishing(adapter);
}
/* empty and free ana buffer pool - also used to do cleanup in error paths */
@@ -293,10 +276,8 @@
{
int i;
- if(pool->free_map) {
- kfree(pool->free_map);
- pool->free_map = NULL;
- }
+ kfree(pool->free_map);
+ pool->free_map = NULL;
if(pool->skbuff && pool->dma_addr) {
for(i = 0; i < pool->size; ++i) {
@@ -321,6 +302,7 @@
kfree(pool->skbuff);
pool->skbuff = NULL;
}
+ pool->active = 0;
}
/* remove a buffer from a pool */
@@ -379,6 +361,12 @@
ibmveth_assert(pool < IbmVethNumBufferPools);
ibmveth_assert(index < adapter->rx_buff_pool[pool].size);
+ if(!adapter->rx_buff_pool[pool].active) {
+ ibmveth_rxq_harvest_buffer(adapter);
+ ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]);
+ return;
+ }
+
desc.desc = 0;
desc.fields.valid = 1;
desc.fields.length = adapter->rx_buff_pool[pool].buff_size;
@@ -409,6 +397,8 @@
static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
{
+ int i;
+
if(adapter->buffer_list_addr != NULL) {
if(!dma_mapping_error(adapter->buffer_list_dma)) {
dma_unmap_single(&adapter->vdev->dev,
@@ -443,26 +433,24 @@
adapter->rx_queue.queue_addr = NULL;
}
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[0]);
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[1]);
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[2]);
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[i]);
}
static int ibmveth_open(struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev->priv;
u64 mac_address = 0;
- int rxq_entries;
+ int rxq_entries = 1;
unsigned long lpar_rc;
int rc;
union ibmveth_buf_desc rxq_desc;
+ int i;
ibmveth_debug_printk("open starting\n");
- rxq_entries =
- adapter->rx_buff_pool[0].size +
- adapter->rx_buff_pool[1].size +
- adapter->rx_buff_pool[2].size + 1;
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ rxq_entries += adapter->rx_buff_pool[i].size;
adapter->buffer_list_addr = (void*) get_zeroed_page(GFP_KERNEL);
adapter->filter_list_addr = (void*) get_zeroed_page(GFP_KERNEL);
@@ -502,14 +490,8 @@
adapter->rx_queue.num_slots = rxq_entries;
adapter->rx_queue.toggle = 1;
- if(ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[0]) ||
- ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[1]) ||
- ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[2]))
- {
- ibmveth_error_printk("unable to allocate buffer pools\n");
- ibmveth_cleanup(adapter);
- return -ENOMEM;
- }
+ /* call change_mtu to init the buffer pools based in initial mtu */
+ ibmveth_change_mtu(netdev, netdev->mtu);
memcpy(&mac_address, netdev->dev_addr, netdev->addr_len);
mac_address = mac_address >> 16;
@@ -552,10 +534,10 @@
return rc;
}
- netif_start_queue(netdev);
+ ibmveth_debug_printk("initial replenish cycle\n");
+ ibmveth_replenish_task(adapter);
- ibmveth_debug_printk("scheduling initial replenish cycle\n");
- ibmveth_schedule_replenishing(adapter);
+ netif_start_queue(netdev);
ibmveth_debug_printk("open complete\n");
@@ -573,9 +555,6 @@
free_irq(netdev->irq, netdev);
- cancel_delayed_work(&adapter->replenish_task);
- flush_scheduled_work();
-
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
} while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy));
@@ -640,12 +619,18 @@
unsigned long lpar_rc;
int nfrags = 0, curfrag;
unsigned long correlator;
+ unsigned long flags;
unsigned int retry_count;
+ unsigned int tx_dropped = 0;
+ unsigned int tx_bytes = 0;
+ unsigned int tx_packets = 0;
+ unsigned int tx_send_failed = 0;
+ unsigned int tx_map_failed = 0;
+
if ((skb_shinfo(skb)->nr_frags + 1) > IbmVethMaxSendFrags) {
- adapter->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return 0;
+ tx_dropped++;
+ goto out;
}
memset(&desc, 0, sizeof(desc));
@@ -664,10 +649,9 @@
if(dma_mapping_error(desc[0].fields.address)) {
ibmveth_error_printk("tx: unable to map initial fragment\n");
- adapter->tx_map_failed++;
- adapter->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return 0;
+ tx_map_failed++;
+ tx_dropped++;
+ goto out;
}
curfrag = nfrags;
@@ -684,8 +668,8 @@
if(dma_mapping_error(desc[curfrag+1].fields.address)) {
ibmveth_error_printk("tx: unable to map fragment %d\n", curfrag);
- adapter->tx_map_failed++;
- adapter->stats.tx_dropped++;
+ tx_map_failed++;
+ tx_dropped++;
/* Free all the mappings we just created */
while(curfrag < nfrags) {
dma_unmap_single(&adapter->vdev->dev,
@@ -694,8 +678,7 @@
DMA_TO_DEVICE);
curfrag++;
}
- dev_kfree_skb(skb);
- return 0;
+ goto out;
}
}
@@ -720,11 +703,12 @@
ibmveth_error_printk("tx: desc[%i] valid=%d, len=%d, address=0x%d\n", i,
desc[i].fields.valid, desc[i].fields.length, desc[i].fields.address);
}
- adapter->tx_send_failed++;
- adapter->stats.tx_dropped++;
+ tx_send_failed++;
+ tx_dropped++;
} else {
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += skb->len;
+ tx_packets++;
+ tx_bytes += skb->len;
+ netdev->trans_start = jiffies;
}
do {
@@ -733,6 +717,14 @@
desc[nfrags].fields.length, DMA_TO_DEVICE);
} while(--nfrags >= 0);
+out: spin_lock_irqsave(&adapter->stats_lock, flags);
+ adapter->stats.tx_dropped += tx_dropped;
+ adapter->stats.tx_bytes += tx_bytes;
+ adapter->stats.tx_packets += tx_packets;
+ adapter->tx_send_failed += tx_send_failed;
+ adapter->tx_map_failed += tx_map_failed;
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+
dev_kfree_skb(skb);
return 0;
}
@@ -776,13 +768,14 @@
adapter->stats.rx_packets++;
adapter->stats.rx_bytes += length;
frames_processed++;
+ netdev->last_rx = jiffies;
}
} else {
more_work = 0;
}
} while(more_work && (frames_processed < max_frames_to_process));
- ibmveth_schedule_replenishing(adapter);
+ ibmveth_replenish_task(adapter);
if(more_work) {
/* more work to do - return that we are not done yet */
@@ -883,17 +876,54 @@
static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || (new_mtu > (1<<20)))
+ struct ibmveth_adapter *adapter = dev->priv;
+ int i;
+ int prev_smaller = 1;
+
+ if ((new_mtu < 68) ||
+ (new_mtu > (pool_size[IbmVethNumBufferPools-1]) - IBMVETH_BUFF_OH))
return -EINVAL;
+
+ for(i = 0; i<IbmVethNumBufferPools; i++) {
+ int activate = 0;
+ if (new_mtu > (pool_size[i] - IBMVETH_BUFF_OH)) {
+ activate = 1;
+ prev_smaller= 1;
+ } else {
+ if (prev_smaller)
+ activate = 1;
+ prev_smaller= 0;
+ }
+
+ if (activate && !adapter->rx_buff_pool[i].active) {
+ struct ibmveth_buff_pool *pool =
+ &adapter->rx_buff_pool[i];
+ if(ibmveth_alloc_buffer_pool(pool)) {
+ ibmveth_error_printk("unable to alloc pool\n");
+ return -ENOMEM;
+ }
+ adapter->rx_buff_pool[i].active = 1;
+ } else if (!activate && adapter->rx_buff_pool[i].active) {
+ adapter->rx_buff_pool[i].active = 0;
+ h_free_logical_lan_buffer(adapter->vdev->unit_address,
+ (u64)pool_size[i]);
+ }
+
+ }
+
+ /* kick the interrupt handler so that the new buffer pools get
+ replenished or deallocated */
+ ibmveth_interrupt(dev->irq, dev, NULL);
+
dev->mtu = new_mtu;
return 0;
}
static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
{
- int rc;
+ int rc, i;
struct net_device *netdev;
- struct ibmveth_adapter *adapter;
+ struct ibmveth_adapter *adapter = NULL;
unsigned char *mac_addr_p;
unsigned int *mcastFilterSize_p;
@@ -960,23 +990,21 @@
netdev->ethtool_ops = &netdev_ethtool_ops;
netdev->change_mtu = ibmveth_change_mtu;
SET_NETDEV_DEV(netdev, &dev->dev);
+ netdev->features |= NETIF_F_LLTX;
+ spin_lock_init(&adapter->stats_lock);
memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[0], 0, IbmVethPool0DftCnt, IbmVethPool0DftSize);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[1], 1, IbmVethPool1DftCnt, IbmVethPool1DftSize);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[2], 2, IbmVethPool2DftCnt, IbmVethPool2DftSize);
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ ibmveth_init_buffer_pool(&adapter->rx_buff_pool[i], i,
+ pool_count[i], pool_size[i]);
ibmveth_debug_printk("adapter @ 0x%p\n", adapter);
- INIT_WORK(&adapter->replenish_task, (void*)ibmveth_replenish_task, (void*)adapter);
-
adapter->buffer_list_dma = DMA_ERROR_CODE;
adapter->filter_list_dma = DMA_ERROR_CODE;
adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
- atomic_set(&adapter->not_replenishing, 1);
-
ibmveth_debug_printk("registering netdev...\n");
rc = register_netdev(netdev);
diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h
index 51a470d..46919a8 100644
--- a/drivers/net/ibmveth.h
+++ b/drivers/net/ibmveth.h
@@ -49,6 +49,7 @@
#define H_SEND_LOGICAL_LAN 0x120
#define H_MULTICAST_CTRL 0x130
#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
/* hcall macros */
#define h_register_logical_lan(ua, buflst, rxq, fltlst, mac) \
@@ -69,13 +70,15 @@
#define h_change_logical_lan_mac(ua, mac) \
plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac)
-#define IbmVethNumBufferPools 3
-#define IbmVethPool0DftSize (1024 * 2)
-#define IbmVethPool1DftSize (1024 * 4)
-#define IbmVethPool2DftSize (1024 * 10)
-#define IbmVethPool0DftCnt 256
-#define IbmVethPool1DftCnt 256
-#define IbmVethPool2DftCnt 256
+#define h_free_logical_lan_buffer(ua, bufsize) \
+ plpar_hcall_norets(H_FREE_LOGICAL_LAN_BUFFER, ua, bufsize)
+
+#define IbmVethNumBufferPools 5
+#define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */
+
+/* pool_size should be sorted */
+static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
+static int pool_count[] = { 256, 768, 256, 256, 256 };
#define IBM_VETH_INVALID_MAP ((u16)0xffff)
@@ -90,6 +93,7 @@
u16 *free_map;
dma_addr_t *dma_addr;
struct sk_buff **skbuff;
+ int active;
};
struct ibmveth_rx_q {
@@ -114,10 +118,6 @@
dma_addr_t filter_list_dma;
struct ibmveth_buff_pool rx_buff_pool[IbmVethNumBufferPools];
struct ibmveth_rx_q rx_queue;
- atomic_t not_replenishing;
-
- /* helper tasks */
- struct work_struct replenish_task;
/* adapter specific stats */
u64 replenish_task_cycles;
@@ -131,6 +131,7 @@
u64 tx_linearize_failed;
u64 tx_map_failed;
u64 tx_send_failed;
+ spinlock_t stats_lock;
};
struct ibmveth_buf_desc_fields {
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 0a08c53..0282771 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1695,11 +1695,9 @@
freebufs:
for (i = 0; i < TX_SLOTS; ++i)
- if (self->tx_bufs[i])
- kfree (self->tx_bufs[i]);
+ kfree (self->tx_bufs[i]);
for (i = 0; i < RX_SLOTS; ++i)
- if (self->rx_bufs[i])
- kfree (self->rx_bufs[i]);
+ kfree (self->rx_bufs[i]);
kfree(self->ringbuf);
freeregion:
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 6c766fd..c22c051 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1168,10 +1168,8 @@
unregister_netdev(self->netdev);
/* Remove the speed buffer */
- if (self->speed_buff != NULL) {
- kfree(self->speed_buff);
- self->speed_buff = NULL;
- }
+ kfree(self->speed_buff);
+ self->speed_buff = NULL;
}
/********************** USB CONFIG SUBROUTINES **********************/
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index 5971315..3d016a4 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -235,8 +235,7 @@
__FUNCTION__, self->io.sir_base);
release_region(self->io.sir_base, self->io.sir_ext);
- if (self->tx_buff.head)
- kfree(self->tx_buff.head);
+ kfree(self->tx_buff.head);
if (self->rx_buff.skb)
kfree_skb(self->rx_buff.skb);
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index efc5a88..df22b8b 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -490,8 +490,7 @@
{
if (dev->rx_buff.skb)
kfree_skb(dev->rx_buff.skb);
- if (dev->tx_buff.head)
- kfree(dev->tx_buff.head);
+ kfree(dev->tx_buff.head);
dev->rx_buff.head = dev->tx_buff.head = NULL;
dev->rx_buff.skb = NULL;
}
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 651c5a6..a9f49f0 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -473,8 +473,7 @@
rd_set_addr_status(rd, 0, 0);
if (busaddr)
pci_unmap_single(r->pdev, busaddr, r->len, r->dir);
- if (rd->buf)
- kfree(rd->buf);
+ kfree(rd->buf);
}
kfree(r);
return 0;
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index 81d0a26..09b1e7b 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -1035,10 +1035,8 @@
{
macio_unregister_driver(&mace_driver);
- if (dummy_buf) {
- kfree(dummy_buf);
- dummy_buf = NULL;
- }
+ kfree(dummy_buf);
+ dummy_buf = NULL;
}
MODULE_AUTHOR("Paul Mackerras");
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index e531a4e..d11821d 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -675,7 +675,6 @@
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
pci_enable_device(pdev);
- pci_set_master(pdev);
NS8390_init(dev, 1);
netif_device_attach(dev);
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 925d1df..bb42ff2 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -696,8 +696,7 @@
return;
for(i=0;i<TMDNUM;i++) {
- if(p->tmdbounce[i])
- kfree(p->tmdbounce[i]);
+ kfree(p->tmdbounce[i]);
#ifdef XMT_VIA_SKB
if(p->tmd_skb[i])
dev_kfree_skb(p->tmd_skb[i]);
@@ -710,12 +709,10 @@
if(p->recv_skb[i])
dev_kfree_skb(p->recv_skb[i]);
#else
- if(p->recvbounce[i])
- kfree(p->recvbounce[i]);
+ kfree(p->recvbounce[i]);
#endif
}
- if(p->self)
- kfree(p->self);
+ kfree(p->self);
}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9f22d138..818c185 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1020,6 +1020,12 @@
} else {
outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
}
+ } else if (info->flags & IS_DL10019) {
+ /* Advertise 100F, 100H, 10F, 10H */
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
+ /* Restart MII autonegotiation */
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
}
}
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index ec1a18d..19c2df9 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1710,10 +1710,8 @@
error = -EFAULT;
}
wf_out:
- if (oldimage)
- kfree(oldimage);
- if (image)
- kfree(image);
+ kfree(oldimage);
+ kfree(image);
return error;
case SIOCRRID:
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index d303d16..3f5e93a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -705,8 +705,7 @@
}
kfree(mac_control->rings[i].ba[j]);
}
- if (mac_control->rings[i].ba)
- kfree(mac_control->rings[i].ba);
+ kfree(mac_control->rings[i].ba);
}
#endif
@@ -3045,7 +3044,7 @@
int wait_for_msix_trans(nic_t *nic, int i)
{
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 val64;
int ret = 0, cnt = 0;
@@ -3066,7 +3065,7 @@
void restore_xmsi_data(nic_t *nic)
{
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 val64;
int i;
@@ -3084,7 +3083,7 @@
void store_xmsi_data(nic_t *nic)
{
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 val64, addr, data;
int i;
@@ -3107,7 +3106,7 @@
int s2io_enable_msi(nic_t *nic)
{
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
u16 msi_ctrl, msg_val;
struct config_param *config = &nic->config;
struct net_device *dev = nic->dev;
@@ -3157,7 +3156,7 @@
int s2io_enable_msi_x(nic_t *nic)
{
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 tx_mat, rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index fd01670..110e777 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -997,10 +997,7 @@
if (dev) {
unregister_netdev(dev);
-
- if (dev->priv)
- kfree(dev->priv);
-
+ kfree(dev->priv);
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
@@ -1096,8 +1093,7 @@
return 0;
out:
- if (dev->priv)
- kfree(dev->priv);
+ kfree(dev->priv);
return ret;
}
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 92f7552..478791e 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -842,7 +842,7 @@
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
int bit_nr =
- ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
rx_mode |= AcceptMulticast;
}
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 23b713c..1d4d886 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1696,15 +1696,20 @@
long ioaddr = net_dev->base_addr;
unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
+ int rx_work_limit;
if (netif_msg_rx_status(sis_priv))
printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
"status:0x%8.8x\n",
sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
+ rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx;
while (rx_status & OWN) {
unsigned int rx_size;
+ if (--rx_work_limit < 0)
+ break;
+
rx_size = (rx_status & DSIZE) - CRC_SIZE;
if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
@@ -1732,9 +1737,11 @@
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
if (netif_msg_rx_err(sis_priv))
- printk(KERN_INFO "%s: NULL pointer "
- "encountered in Rx ring, skipping\n",
- net_dev->name);
+ printk(KERN_WARNING "%s: NULL pointer "
+ "encountered in Rx ring\n"
+ "cur_rx:%4.4d, dirty_rx:%4.4d\n",
+ net_dev->name, sis_priv->cur_rx,
+ sis_priv->dirty_rx);
break;
}
@@ -1770,6 +1777,7 @@
sis_priv->rx_ring[entry].cmdsts = 0;
sis_priv->rx_ring[entry].bufptr = 0;
sis_priv->stats.rx_dropped++;
+ sis_priv->cur_rx++;
break;
}
skb->dev = net_dev;
@@ -1787,7 +1795,7 @@
/* refill the Rx buffer, what if the rate of refilling is slower
* than consuming ?? */
- for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) {
+ for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) {
struct sk_buff *skb;
entry = sis_priv->dirty_rx % NUM_RX_DESC;
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 0ddaa61..c573bb3 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1983,6 +1983,10 @@
if (lp->version >= (CHIP_91100 << 4))
smc_phy_detect(dev);
+ /* then shut everything down to save power */
+ smc_shutdown(dev);
+ smc_phy_powerdown(dev);
+
/* Set default parameters */
lp->msg_enable = NETIF_MSG_LINK;
lp->ctl_rfduplx = 0;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index efdb179..38b2b0a 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1091,8 +1091,10 @@
rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE;
np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size;
np->queue_mem = pci_alloc_consistent(np->pci_dev, np->queue_mem_size, &np->queue_mem_dma);
- if (np->queue_mem == 0)
+ if (np->queue_mem == NULL) {
+ free_irq(dev->irq, dev);
return -ENOMEM;
+ }
np->tx_done_q = np->queue_mem;
np->tx_done_q_dma = np->queue_mem_dma;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 5de0554..0ab9c38 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -80,7 +80,7 @@
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
- Version LK1.08 (D-Link):
+ Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- Fix bug of custom mac address
(StationAddr register only accept word write)
@@ -91,11 +91,14 @@
Version LK1.09a (ICPlus):
- Add the delay time in reading the contents of EEPROM
+ Version LK1.10 (Philippe De Muyter phdm@macqel.be):
+ - Make 'unblock interface after Tx underrun' work
+
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.09a"
-#define DRV_RELDATE "10-Jul-2003"
+#define DRV_VERSION "1.01+LK1.10"
+#define DRV_RELDATE "28-Oct-2005"
/* The user-configurable values.
@@ -263,8 +266,10 @@
IVb. References
The Sundance ST201 datasheet, preliminary version.
-http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
-http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+The Kendin KS8723 datasheet, preliminary version.
+The ICplus IP100 datasheet, preliminary version.
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
IVc. Errata
@@ -500,6 +505,25 @@
static int netdev_close(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
+static void sundance_reset(struct net_device *dev, unsigned long reset_cmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base + ASICCtrl;
+ int countdown;
+
+ /* ST201 documentation states ASICCtrl is a 32bit register */
+ iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr);
+ /* ST201 documentation states reset can take up to 1 ms */
+ countdown = 10 + 1;
+ while (ioread32 (ioaddr) & (ResetBusy << 16)) {
+ if (--countdown == 0) {
+ printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
+ break;
+ }
+ udelay(100);
+ }
+}
+
static int __devinit sundance_probe1 (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1190,23 +1214,33 @@
("%s: Transmit status is %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x1e) {
+ if (netif_msg_tx_err(np))
+ printk("%s: Transmit error status %4.4x.\n",
+ dev->name, tx_status);
np->stats.tx_errors++;
if (tx_status & 0x10)
np->stats.tx_fifo_errors++;
if (tx_status & 0x08)
np->stats.collisions++;
+ if (tx_status & 0x04)
+ np->stats.tx_fifo_errors++;
if (tx_status & 0x02)
np->stats.tx_window_errors++;
- /* This reset has not been verified!. */
- if (tx_status & 0x10) { /* Reset the Tx. */
- np->stats.tx_fifo_errors++;
- spin_lock(&np->lock);
- reset_tx(dev);
- spin_unlock(&np->lock);
+ /*
+ ** This reset has been verified on
+ ** DFE-580TX boards ! phdm@macqel.be.
+ */
+ if (tx_status & 0x10) { /* TxUnderrun */
+ unsigned short txthreshold;
+
+ txthreshold = ioread16 (ioaddr + TxStartThresh);
+ /* Restart Tx FIFO and transmitter */
+ sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16);
+ iowrite16 (txthreshold, ioaddr + TxStartThresh);
+ /* No need to reset the Tx pointer here */
}
- if (tx_status & 0x1e) /* Restart the Tx. */
- iowrite16 (TxEnable,
- ioaddr + MACCtrl1);
+ /* Restart the Tx. */
+ iowrite16 (TxEnable, ioaddr + MACCtrl1);
}
/* Yup, this is a documentation bug. It cost me *hours*. */
iowrite16 (0, ioaddr + TxStatus);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1802c3b..1828a6b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -37,6 +37,7 @@
#include <linux/tcp.h>
#include <linux/workqueue.h>
#include <linux/prefetch.h>
+#include <linux/dma-mapping.h>
#include <net/checksum.h>
@@ -67,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.42"
-#define DRV_MODULE_RELDATE "Oct 3, 2005"
+#define DRV_MODULE_VERSION "3.43"
+#define DRV_MODULE_RELDATE "Oct 24, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -219,6 +220,10 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S,
@@ -466,6 +471,15 @@
spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
+static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val)
+{
+ /* If no workaround is needed, write to mem space directly */
+ if (tp->write32 != tg3_write_indirect_reg32)
+ tw32(NIC_SRAM_WIN_BASE + off, val);
+ else
+ tg3_write_mem(tp, off, val);
+}
+
static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
{
unsigned long flags;
@@ -570,7 +584,7 @@
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
u32 orig_clock_ctrl;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
return;
orig_clock_ctrl = clock_ctrl;
@@ -1210,7 +1224,7 @@
CLOCK_CTRL_ALTCLK |
CLOCK_CTRL_PWRDOWN_PLL133);
udelay(40);
- } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
/* do nothing */
} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
@@ -3712,14 +3726,14 @@
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
ethtool_op_set_tso(dev, 0);
}
else
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
} else {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
}
@@ -3850,7 +3864,7 @@
memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) &&
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
(tp->dev->mtu > ETH_DATA_LEN))
tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
@@ -3905,10 +3919,8 @@
*/
static void tg3_free_consistent(struct tg3 *tp)
{
- if (tp->rx_std_buffers) {
- kfree(tp->rx_std_buffers);
- tp->rx_std_buffers = NULL;
- }
+ kfree(tp->rx_std_buffers);
+ tp->rx_std_buffers = NULL;
if (tp->rx_std) {
pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES,
tp->rx_std, tp->rx_std_mapping);
@@ -4347,7 +4359,7 @@
val &= ~PCIX_CAPS_RELAXED_ORDERING;
pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
u32 val;
/* Chip reset on 5780 will reset MSI enable bit,
@@ -6003,7 +6015,7 @@
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780))
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
limit = 8;
else
limit = 16;
@@ -6191,14 +6203,16 @@
tp->timer_counter = tp->timer_multiplier;
}
- /* Heartbeat is only sent once every 120 seconds. */
+ /* Heartbeat is only sent once every 2 seconds. */
if (!--tp->asf_counter) {
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
u32 val;
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_ALIVE);
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 3);
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX,
+ FWCMD_NICDRV_ALIVE2);
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
+ /* 5 seconds timeout */
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
val = tr32(GRC_RX_CPU_EVENT);
val |= (1 << 14);
tw32(GRC_RX_CPU_EVENT, val);
@@ -6409,7 +6423,7 @@
tp->timer_counter = tp->timer_multiplier =
(HZ / tp->timer_offset);
tp->asf_counter = tp->asf_multiplier =
- ((HZ / tp->timer_offset) * 120);
+ ((HZ / tp->timer_offset) * 2);
init_timer(&tp->timer);
tp->timer.expires = jiffies + tp->timer_offset;
@@ -7237,7 +7251,7 @@
cmd->supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES))
+ if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
@@ -7264,7 +7278,7 @@
{
struct tg3 *tp = netdev_priv(dev);
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
+ if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) {
/* These are the only valid advertisement bits allowed. */
if (cmd->autoneg == AUTONEG_ENABLE &&
(cmd->advertising & ~(ADVERTISED_1000baseT_Half |
@@ -7272,7 +7286,17 @@
ADVERTISED_Autoneg |
ADVERTISED_FIBRE)))
return -EINVAL;
- }
+ /* Fiber can only do SPEED_1000. */
+ else if ((cmd->autoneg != AUTONEG_ENABLE) &&
+ (cmd->speed != SPEED_1000))
+ return -EINVAL;
+ /* Copper cannot force SPEED_1000. */
+ } else if ((cmd->autoneg != AUTONEG_ENABLE) &&
+ (cmd->speed == SPEED_1000))
+ return -EINVAL;
+ else if ((cmd->speed == SPEED_1000) &&
+ (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+ return -EINVAL;
tg3_full_lock(tp, 0);
@@ -8380,7 +8404,7 @@
}
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) {
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
@@ -8980,7 +9004,7 @@
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
else
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
@@ -9393,8 +9417,11 @@
}
/* Find msi capability. */
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
+ tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -9412,7 +9439,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
@@ -9607,7 +9634,7 @@
* ether_setup() via the alloc_etherdev() call
*/
if (tp->dev->mtu > ETH_DATA_LEN &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
/* Determine WakeOnLan speed to use. */
@@ -9830,7 +9857,7 @@
mac_offset = 0x7c;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
!(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
mac_offset = 0xcc;
if (tg3_nvram_lock(tp))
@@ -10148,6 +10175,9 @@
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
/* 5780 always in PCIX mode */
tp->dma_rwctrl |= 0x00144000;
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
+ /* 5714 always in PCIX mode */
+ tp->dma_rwctrl |= 0x00148000;
} else {
tp->dma_rwctrl |= 0x001b000f;
}
@@ -10347,6 +10377,7 @@
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5752: return "5752";
+ case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
case PHY_ID_BCM8002: return "8002/serdes";
case 0: return "serdes";
@@ -10492,17 +10523,17 @@
}
/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
"for consistent allocations\n");
goto err_out_free_res;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2e733c6..fb7e2a5 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -137,6 +137,7 @@
#define ASIC_REV_5750 0x04
#define ASIC_REV_5752 0x06
#define ASIC_REV_5780 0x08
+#define ASIC_REV_5714 0x09
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
@@ -531,6 +532,8 @@
#define MAC_SERDES_CFG_EDGE_SELECT 0x00001000
#define MAC_SERDES_STAT 0x00000594
/* 0x598 --> 0x5b0 unused */
+#define SERDES_RX_CTRL 0x000005b0 /* 5780/5714 only */
+#define SERDES_RX_SIG_DETECT 0x00000400
#define SG_DIG_CTRL 0x000005b0
#define SG_DIG_USING_HW_AUTONEG 0x80000000
#define SG_DIG_SOFT_RESET 0x40000000
@@ -1329,6 +1332,8 @@
#define GRC_LCLCTRL_CLEARINT 0x00000002
#define GRC_LCLCTRL_SETINT 0x00000004
#define GRC_LCLCTRL_INT_ON_ATTN 0x00000008
+#define GRC_LCLCTRL_USE_SIG_DETECT 0x00000010 /* 5714/5780 only */
+#define GRC_LCLCTRL_USE_EXT_SIG_DETECT 0x00000020 /* 5714/5780 only */
#define GRC_LCLCTRL_GPIO_INPUT3 0x00000020
#define GRC_LCLCTRL_GPIO_OE3 0x00000040
#define GRC_LCLCTRL_GPIO_OUTPUT3 0x00000080
@@ -1507,6 +1512,7 @@
#define FWCMD_NICDRV_IPV6ADDR_CHG 0x00000004
#define FWCMD_NICDRV_FIX_DMAR 0x00000005
#define FWCMD_NICDRV_FIX_DMAW 0x00000006
+#define FWCMD_NICDRV_ALIVE2 0x0000000d
#define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c
#define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80
#define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00
@@ -2175,6 +2181,7 @@
TG3_FLG2_MII_SERDES)
#define TG3_FLG2_PARALLEL_DETECT 0x01000000
#define TG3_FLG2_ICH_WORKAROUND 0x02000000
+#define TG3_FLG2_5780_CLASS 0x04000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
@@ -2222,6 +2229,7 @@
#define PHY_ID_BCM5705 0x600081a0
#define PHY_ID_BCM5750 0x60008180
#define PHY_ID_BCM5752 0x60008100
+#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM8002 0x60010140
#define PHY_ID_INVALID 0xffffffff
@@ -2246,8 +2254,8 @@
(X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \
(X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \
(X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \
- (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5780 || \
- (X) == PHY_ID_BCM8002)
+ (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
+ (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM8002)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 6b8eee8..d7fb3ff 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -2076,8 +2076,7 @@
return 0;
err_out_iomap:
- if (de->ee_data)
- kfree(de->ee_data);
+ kfree(de->ee_data);
iounmap(regs);
err_out_res:
pci_release_regions(pdev);
@@ -2096,8 +2095,7 @@
if (!dev)
BUG();
unregister_netdev(dev);
- if (de->ee_data)
- kfree(de->ee_data);
+ kfree(de->ee_data);
iounmap(de->regs);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 6266a9a..125ed00 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1727,8 +1727,7 @@
tp->rx_ring, tp->rx_ring_dma);
err_out_mtable:
- if (tp->mtable)
- kfree (tp->mtable);
+ kfree (tp->mtable);
pci_iounmap(pdev, ioaddr);
err_out_free_res:
@@ -1806,8 +1805,7 @@
sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
tp->rx_ring, tp->rx_ring_dma);
- if (tp->mtable)
- kfree (tp->mtable);
+ kfree (tp->mtable);
pci_iounmap(pdev, tp->base_addr);
free_netdev (dev);
pci_release_regions (pdev);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index abc5cee..a368d08 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1212,10 +1212,8 @@
velocity_free_td_ring_entry(vptr, j, i);
}
- if (vptr->td_infos[j]) {
- kfree(vptr->td_infos[j]);
- vptr->td_infos[j] = NULL;
- }
+ kfree(vptr->td_infos[j]);
+ vptr->td_infos[j] = NULL;
}
}
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index cb429e7..4c11699 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2381,14 +2381,10 @@
dev_kfree_skb(skb);
}
- if (ai->flash)
- kfree(ai->flash);
- if (ai->rssi)
- kfree(ai->rssi);
- if (ai->APList)
- kfree(ai->APList);
- if (ai->SSID)
- kfree(ai->SSID);
+ kfree(ai->flash);
+ kfree(ai->rssi);
+ kfree(ai->APList);
+ kfree(ai->SSID);
if (freeres) {
/* PCMCIA frees this stuff, so only for PCI and ISA */
release_region( dev->base_addr, 64 );
@@ -3626,10 +3622,8 @@
int rc;
memset( &mySsid, 0, sizeof( mySsid ) );
- if (ai->flash) {
- kfree (ai->flash);
- ai->flash = NULL;
- }
+ kfree (ai->flash);
+ ai->flash = NULL;
/* The NOP is the first step in getting the card going */
cmd.cmd = NOP;
@@ -3666,14 +3660,10 @@
tdsRssiRid rssi_rid;
CapabilityRid cap_rid;
- if (ai->APList) {
- kfree(ai->APList);
- ai->APList = NULL;
- }
- if (ai->SSID) {
- kfree(ai->SSID);
- ai->SSID = NULL;
- }
+ kfree(ai->APList);
+ ai->APList = NULL;
+ kfree(ai->SSID);
+ ai->SSID = NULL;
// general configuration (read/modify/write)
status = readConfigRid(ai, lock);
if ( status != SUCCESS ) return ERROR;
@@ -3687,10 +3677,8 @@
memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */
}
else {
- if (ai->rssi) {
- kfree(ai->rssi);
- ai->rssi = NULL;
- }
+ kfree(ai->rssi);
+ ai->rssi = NULL;
if (cap_rid.softCap & 8)
ai->config.rmode |= RXMODE_NORMALIZED_RSSI;
else
@@ -5369,11 +5357,13 @@
static int proc_close( struct inode *inode, struct file *file )
{
- struct proc_data *data = (struct proc_data *)file->private_data;
- if ( data->on_close != NULL ) data->on_close( inode, file );
- if ( data->rbuffer ) kfree( data->rbuffer );
- if ( data->wbuffer ) kfree( data->wbuffer );
- kfree( data );
+ struct proc_data *data = file->private_data;
+
+ if (data->on_close != NULL)
+ data->on_close(inode, file);
+ kfree(data->rbuffer);
+ kfree(data->wbuffer);
+ kfree(data);
return 0;
}
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index bf25584..784de91 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -258,9 +258,7 @@
/* Unlink device structure, free pieces */
*linkp = link->next;
- if (link->priv) {
- kfree(link->priv);
- }
+ kfree(link->priv);
kfree(link);
} /* airo_detach */
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index d570110..1fbe027 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1653,8 +1653,7 @@
unregister_netdev(dev);
remove_proc_entry("driver/atmel", NULL);
free_irq(dev->irq, dev);
- if (priv->firmware)
- kfree(priv->firmware);
+ kfree(priv->firmware);
if (freeres) {
/* PCMCIA frees this stuff, so only for PCI */
release_region(dev->base_addr, 64);
@@ -2450,8 +2449,7 @@
break;
}
- if (priv->firmware)
- kfree(priv->firmware);
+ kfree(priv->firmware);
priv->firmware = new_firmware;
priv->firmware_length = com.len;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ff031a3..195cb36 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -259,8 +259,7 @@
/* Unlink device structure, free pieces */
*linkp = link->next;
- if (link->priv)
- kfree(link->priv);
+ kfree(link->priv);
kfree(link);
}
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index eba0d9d..579480d 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -444,6 +444,43 @@
return err;
}
+/* Write a block of data to the chip's buffer with padding if
+ * neccessary, via the BAP. Synchronization/serialization is the
+ * caller's problem. len must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if (len < 0 || len % 2 || data_len > len)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Transfer all the complete words of data */
+ hermes_write_words(hw, dreg, buf, data_len/2);
+ /* If there is an odd byte left over pad and transfer it */
+ if (data_len & 1) {
+ u8 end[2];
+ end[1] = 0;
+ end[0] = ((unsigned char *)buf)[data_len - 1];
+ hermes_write_words(hw, dreg, end, 1);
+ data_len ++;
+ }
+ /* Now send zeros for the padding */
+ if (data_len < len)
+ hermes_clear_words(hw, dreg, (len - data_len) / 2);
+ /* Complete */
+ out:
+ return err;
+}
+
/* Read a Length-Type-Value record from the card.
*
* If length is NULL, we ignore the length read from the card, and
@@ -531,6 +568,7 @@
EXPORT_SYMBOL(hermes_bap_pread);
EXPORT_SYMBOL(hermes_bap_pwrite);
+EXPORT_SYMBOL(hermes_bap_pwrite_pad);
EXPORT_SYMBOL(hermes_read_ltv);
EXPORT_SYMBOL(hermes_write_ltv);
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index ad28e32..a6bd472 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -376,6 +376,8 @@
u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
u16 id, u16 offset);
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
+ unsigned data_len, unsigned len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 53f5246..2617d70 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -552,7 +552,6 @@
kfree(addr);
kfree(qual);
-
return 0;
}
@@ -3081,9 +3080,7 @@
ret = local->func->download(local, param);
out:
- if (param != NULL)
- kfree(param);
-
+ kfree(param);
return ret;
}
#endif /* PRISM2_DOWNLOAD_SUPPORT */
@@ -3890,9 +3887,7 @@
}
out:
- if (param != NULL)
- kfree(param);
-
+ kfree(param);
return ret;
}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index de4e6c2..3db0c32 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -4030,6 +4030,10 @@
int i;
rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL);
+ if (unlikely(!rxq)) {
+ IPW_ERROR("memory allocation failed\n");
+ return NULL;
+ }
memset(rxq, 0, sizeof(*rxq));
spin_lock_init(&rxq->lock);
INIT_LIST_HEAD(&rxq->rx_free);
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index d3d4ec9..488ab06 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -490,7 +490,8 @@
return 0;
}
- /* Check packet length, pad short packets, round up odd length */
+ /* Length of the packet body */
+ /* FIXME: what if the skb is smaller than this? */
len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN);
skb = skb_padto(skb, len);
if (skb == NULL)
@@ -541,13 +542,21 @@
stats->tx_errors++;
goto fail;
}
+ /* Actual xfer length - allow for padding */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN - ETH_HLEN)
+ len = ETH_ZLEN - ETH_HLEN;
} else { /* IEEE 802.3 frame */
data_len = len + ETH_HLEN;
data_off = HERMES_802_3_OFFSET;
p = skb->data;
+ /* Actual xfer length - round up for odd length packets */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN)
+ len = ETH_ZLEN;
}
- err = hermes_bap_pwrite(hw, USER_BAP, p, data_len,
+ err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len,
txfid, data_off);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 6c9584a..78bdb35 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -754,8 +754,7 @@
pci_unmap_single(priv->pdev, buf->pci_addr,
buf->size, PCI_DMA_FROMDEVICE);
buf->pci_addr = 0;
- if (buf->mem)
- kfree(buf->mem);
+ kfree(buf->mem);
buf->size = 0;
buf->mem = NULL;
}
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 5952e99..3b49efa 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -97,12 +97,6 @@
/* lock the driver code */
spin_lock_irqsave(&priv->slock, flags);
- /* determine the amount of fragments needed to store the frame */
-
- frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- if (init_wds)
- frame_size += 6;
-
/* check whether the destination queue has enough fragments for the frame */
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
@@ -213,6 +207,7 @@
/* store the skb address for future freeing */
priv->data_low_tx[index] = skb;
/* set the proper fragment start address and size information */
+ frame_size = skb->len;
fragment->size = cpu_to_le16(frame_size);
fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
fragment->address = cpu_to_le32(pci_map_address);
@@ -246,12 +241,10 @@
return 0;
drop_free:
- /* free the skbuf structure before aborting */
- dev_kfree_skb(skb);
- skb = NULL;
-
priv->statistics.tx_dropped++;
spin_unlock_irqrestore(&priv->slock, flags);
+ dev_kfree_skb(skb);
+ skb = NULL;
return err;
}
diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c
index 12123e2..eea2f04 100644
--- a/drivers/net/wireless/prism54/oid_mgt.c
+++ b/drivers/net/wireless/prism54/oid_mgt.c
@@ -268,11 +268,10 @@
if (!priv->mib)
return;
- for (i = 0; i < OID_NUM_LAST; i++)
- if (priv->mib[i]) {
- kfree(priv->mib[i]);
- priv->mib[i] = NULL;
- }
+ for (i = 0; i < OID_NUM_LAST; i++) {
+ kfree(priv->mib[i]);
+ priv->mib[i] = NULL;
+ }
kfree(priv->mib);
priv->mib = NULL;
}
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 7bc7fc8..d25264b 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -860,12 +860,9 @@
strip_info->mtu = dev->mtu = mtu;
return (1);
}
- if (r)
- kfree(r);
- if (s)
- kfree(s);
- if (t)
- kfree(t);
+ kfree(r);
+ kfree(s);
+ kfree(t);
return (0);
}
@@ -922,13 +919,9 @@
printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
strip_info->dev->name, old_mtu, strip_info->mtu);
- if (orbuff)
- kfree(orbuff);
- if (osbuff)
- kfree(osbuff);
- if (otbuff)
- kfree(otbuff);
-
+ kfree(orbuff);
+ kfree(osbuff);
+ kfree(otbuff);
return 0;
}
@@ -2498,18 +2491,13 @@
/*
* Free all STRIP frame buffers.
*/
- if (strip_info->rx_buff) {
- kfree(strip_info->rx_buff);
- strip_info->rx_buff = NULL;
- }
- if (strip_info->sx_buff) {
- kfree(strip_info->sx_buff);
- strip_info->sx_buff = NULL;
- }
- if (strip_info->tx_buff) {
- kfree(strip_info->tx_buff);
- strip_info->tx_buff = NULL;
- }
+ kfree(strip_info->rx_buff);
+ strip_info->rx_buff = NULL;
+ kfree(strip_info->sx_buff);
+ strip_info->sx_buff = NULL;
+ kfree(strip_info->tx_buff);
+ strip_info->tx_buff = NULL;
+
del_timer(&strip_info->idle_timer);
return 0;
}
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index a41fbb3..77ecee7 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -42,9 +42,11 @@
au1x00_ss-y += au1000_generic.o
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
+au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
+au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 42cf8bf..24cfee1 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -40,7 +40,15 @@
#include <asm/irq.h>
#include <asm/signal.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/db1x00.h>
+
+#if defined(CONFIG_MIPS_DB1200)
+ #include <db1200.h>
+#elif defined(CONFIG_MIPS_PB1200)
+ #include <pb1200.h>
+#else
+ #include <asm/mach-db1x00/db1x00.h>
+ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+#endif
#include "au1000_generic.h"
@@ -50,7 +58,6 @@
#define debug(x,args...)
#endif
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
@@ -59,6 +66,8 @@
{
#ifdef CONFIG_MIPS_DB1550
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
+#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
#else
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
#endif
@@ -85,11 +94,19 @@
switch (skt->nr) {
case 0:
vs = bcsr->status & 0x3;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ inserted = BOARD_CARD_INSERTED(0);
+#else
inserted = !(bcsr->status & (1<<4));
+#endif
break;
case 1:
vs = (bcsr->status & 0xC)>>2;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ inserted = BOARD_CARD_INSERTED(1);
+#else
inserted = !(bcsr->status & (1<<5));
+#endif
break;
default:/* should never happen */
return;
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index d90a634..ba48cef 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -490,7 +490,7 @@
flush_scheduled_work();
skt->ops->hw_shutdown(skt);
au1x00_pcmcia_config_skt(skt, &dead_socket);
- iounmap(skt->virt_io);
+ iounmap(skt->virt_io + (u32)mips_io_port_base);
skt->virt_io = NULL;
}
@@ -528,10 +528,6 @@
.resume = pcmcia_socket_dev_resume,
};
-static struct platform_device au1x00_device = {
- .name = "au1x00-pcmcia",
- .id = 0,
-};
/* au1x00_pcmcia_init()
*
@@ -545,7 +541,6 @@
int error = 0;
if ((error = driver_register(&au1x00_pcmcia_driver)))
return error;
- platform_device_register(&au1x00_device);
return error;
}
@@ -556,7 +551,6 @@
static void __exit au1x00_pcmcia_exit(void)
{
driver_unregister(&au1x00_pcmcia_driver);
- platform_device_unregister(&au1x00_device);
}
module_init(au1x00_pcmcia_init);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index d5122b1e..b0e7908 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -44,13 +44,13 @@
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
*/
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_PB1200)
#define AU1X_SOCK1_IO 0xF08000000
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
#define AU1X_SOCK1_PHYS_MEM 0xF88000000
#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || defined(CONFIG_MIPS_DB1200)
#define AU1X_SOCK1_IO 0xF04000000
#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
#define AU1X_SOCK1_PHYS_MEM 0xF84000000
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index a107fec..b2d75de 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -787,8 +787,8 @@
return ret;
}
priv->class_device = class_device_create(
- NULL,
vmlogrdr_class,
+ NULL,
MKDEV(vmlogrdr_major, priv->minor_num),
dev,
"%s", dev->bus_id );
diff --git a/drivers/scsi/dec_esp.c b/drivers/scsi/dec_esp.c
index 315f95a..4f39890 100644
--- a/drivers/scsi/dec_esp.c
+++ b/drivers/scsi/dec_esp.c
@@ -228,7 +228,7 @@
mem_start = get_tc_base_addr(slot);
/* Store base addr into esp struct */
- esp->slot = PHYSADDR(mem_start);
+ esp->slot = CPHYSADDR(mem_start);
esp->dregs = 0;
esp->eregs = (struct ESP_regs *) (mem_start + DEC_SCSI_SREG);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f53d7b8..b1b1c6f 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -370,6 +370,8 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = ata_chk_err(ap);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -402,6 +404,8 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = ata_chk_err(ap);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -4254,11 +4258,10 @@
DPRINTK("ENTER\n");
/* alloc a container for our list of ATA ports (buses) */
- host_set = kmalloc(sizeof(struct ata_host_set) +
+ host_set = kzalloc(sizeof(struct ata_host_set) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
if (!host_set)
return 0;
- memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
spin_lock_init(&host_set->lock);
host_set->dev = dev;
@@ -4298,10 +4301,8 @@
count++;
}
- if (!count) {
- kfree(host_set);
- return 0;
- }
+ if (!count)
+ goto err_free_ret;
/* obtain irq, that is shared between channels */
if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
@@ -4359,6 +4360,7 @@
ata_host_remove(host_set->ports[i], 1);
scsi_host_put(host_set->ports[i]->host);
}
+err_free_ret:
kfree(host_set);
VPRINTK("EXIT, returning 0\n");
return 0;
@@ -4468,15 +4470,13 @@
{
struct ata_probe_ent *probe_ent;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
-
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->dev = dev;
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 5885888..89a04b1 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -40,14 +40,56 @@
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
+#define SECTOR_SIZE 512
+
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+#define RW_RECOVERY_MPAGE 0x1
+#define RW_RECOVERY_MPAGE_LEN 12
+#define CACHE_MPAGE 0x8
+#define CACHE_MPAGE_LEN 20
+#define CONTROL_MPAGE 0xa
+#define CONTROL_MPAGE_LEN 12
+#define ALL_MPAGES 0x3f
+#define ALL_SUB_MPAGES 0xff
+
+
+static const u8 def_rw_recovery_mpage[] = {
+ RW_RECOVERY_MPAGE,
+ RW_RECOVERY_MPAGE_LEN - 2,
+ (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */
+ (1 << 6), /* ARRE (auto read reallocation) */
+ 0, /* read retry count */
+ 0, 0, 0, 0,
+ 0, /* write retry count */
+ 0, 0, 0
+};
+
+static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
+ CACHE_MPAGE,
+ CACHE_MPAGE_LEN - 2,
+ 0, /* contains WCE, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, /* contains DRA, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0
+};
+
+static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
+ CONTROL_MPAGE,
+ CONTROL_MPAGE_LEN - 2,
+ 2, /* DSENSE=0, GLTSD=1 */
+ 0, /* [QAM+QERR may be 1, see 05-359r1] */
+ 0, 0, 0, 0, 0xff, 0xff,
+ 0, 30 /* extended self test time, see 05-359r1 */
+};
+
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
@@ -86,6 +128,150 @@
return 0;
}
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq)
+ return -EINTR;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ sreq->sr_data_direction = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ scsi_release_request(sreq);
+
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq) {
+ rc = -EINTR;
+ goto error;
+ }
+
+ sreq->sr_data_direction = DMA_NONE;
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+error:
+ scsi_release_request(sreq);
+ return rc;
+}
+
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
struct ata_port *ap;
@@ -115,6 +301,16 @@
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -ENOTTY;
break;
@@ -173,23 +369,70 @@
}
/**
- * ata_to_sense_error - convert ATA error to SCSI error
- * @qc: Command that we are erroring out
- * @drv_stat: value contained in ATA status register
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
*
- * Converts an ATA error into a SCSI error. While we are at it
- * we decode and dump the ATA error for the user so that they
- * have some idea what really happened at the non make-believe
- * layer.
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & 0x40) printk("DriveReady ");
+ if (stat & 0x20) printk("DeviceFault ");
+ if (stat & 0x10) printk("SeekComplete ");
+ if (stat & 0x08) printk("DataRequest ");
+ if (stat & 0x04) printk("CorrectedError ");
+ if (stat & 0x02) printk("Index ");
+ if (stat & 0x01) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & 0x04) printk("DriveStatusError ");
+ if (err & 0x80) {
+ if (err & 0x04) printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & 0x40) printk("UncorrectableError ");
+ if (err & 0x10) printk("SectorIdNotFound ");
+ if (err & 0x02) printk("TrackZeroNotFound ");
+ if (err & 0x01) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
+/**
+ * ata_to_sense_error - convert ATA error to SCSI error
+ * @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
+ *
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
+ int i;
+
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
@@ -230,96 +473,184 @@
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- int i = 0;
/*
* Is this an error we can process/parse
*/
-
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
-
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
- }
- printk("}\n");
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
}
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
-
- /* Should we dump sector info here too ?? */
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
}
-
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
- }
- i++;
- }
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
-
- i = 0;
/* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
}
- i++;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
- /* "unrecovered read error" */
- } else {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
- /* "write error - auto-reallocation failed" */
+ /* For our last chance pick, use medium read error because
+ * it's much more common than an ATA drive telling you a write
+ * has failed.
+ */
+ *sk = MEDIUM_ERROR;
+ *asc = 0x11; /* "unrecovered read error" */
+ *ascq = 0x04; /* "auto-reallocation failed" */
+
+ translate_done:
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
+ "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
+ *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
+ }
+
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
+
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
+ }
+}
+
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
+ }
+
+ sb[0] = 0x70;
+ sb[7] = 0x0a;
+
+ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
}
}
@@ -871,11 +1202,36 @@
static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ);
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to, a check condition
+ * is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, SK, ASC and ASCQ will all be zero.
+ */
+ if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) &&
+ ((cmd->cmnd[2] & 0x20) || need_sense)) {
+ ata_gen_ata_desc_sense(qc);
+ } else {
+ if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_fixed_sense(qc);
+ }
+ }
+
+ if (need_sense) {
+ /* The ata_gen_..._sense routines fill in tf */
+ ata_dump_status(qc->ap->id, &qc->tf);
+ }
qc->scsidone(cmd);
@@ -1266,13 +1622,9 @@
static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
const u8 *last)
{
- u8 page[] = {
- 0x8, /* page code */
- 0x12, /* page length */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */
- 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
- };
+ u8 page[CACHE_MPAGE_LEN];
+ memcpy(page, def_cache_mpage, sizeof(page));
if (ata_id_wcache_enabled(id))
page[2] |= (1 << 2); /* write cache enable */
if (!ata_id_rahead_enabled(id))
@@ -1296,15 +1648,9 @@
static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30};
-
- /* byte 2: set the descriptor format sense data bit (bit 2)
- * since we need to support returning this format for SAT
- * commands and any SCSI commands against a 48b LBA device.
- */
-
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_control_mpage,
+ sizeof(def_control_mpage));
+ return sizeof(def_control_mpage);
}
/**
@@ -1321,15 +1667,10 @@
static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {
- 0x1, /* page code */
- 0xa, /* page length */
- (1 << 7) | (1 << 6), /* note auto r/w reallocation */
- 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */
- };
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_rw_recovery_mpage,
+ sizeof(def_rw_recovery_mpage));
+ return sizeof(def_rw_recovery_mpage);
}
/**
@@ -1338,7 +1679,9 @@
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Simulate MODE SENSE commands.
+ * Simulate MODE SENSE commands. Assume this is invoked for direct
+ * access devices (e.g. disks) only. There should be no block
+ * descriptor for other device types.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -1348,15 +1691,22 @@
unsigned int buflen)
{
u8 *scsicmd = args->cmd->cmnd, *p, *last;
- unsigned int page_control, six_byte, output_len;
+ const u8 sat_blk_desc[] = {
+ 0, 0, 0, 0, /* number of blocks: sat unspecified */
+ 0,
+ 0, 0x2, 0x0 /* block length: 512 bytes */
+ };
+ u8 pg, spg;
+ unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
VPRINTK("ENTER\n");
six_byte = (scsicmd[0] == MODE_SENSE);
-
- /* we only support saved and current values (which we treat
- * in the same manner)
+ ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
+ /*
+ * LLBA bit in msense(10) ignored (compliant)
*/
+
page_control = scsicmd[2] >> 6;
switch (page_control) {
case 0: /* current */
@@ -1369,29 +1719,42 @@
goto invalid_fld;
}
- if (six_byte)
- output_len = 4;
- else
- output_len = 8;
+ if (six_byte) {
+ output_len = 4 + (ebd ? 8 : 0);
+ alloc_len = scsicmd[4];
+ } else {
+ output_len = 8 + (ebd ? 8 : 0);
+ alloc_len = (scsicmd[7] << 8) + scsicmd[8];
+ }
+ minlen = (alloc_len < buflen) ? alloc_len : buflen;
p = rbuf + output_len;
- last = rbuf + buflen - 1;
+ last = rbuf + minlen - 1;
- switch(scsicmd[2] & 0x3f) {
- case 0x01: /* r/w error recovery */
+ pg = scsicmd[2] & 0x3f;
+ spg = scsicmd[3];
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_fld;
+
+ switch(pg) {
+ case RW_RECOVERY_MPAGE:
output_len += ata_msense_rw_recovery(&p, last);
break;
- case 0x08: /* caching */
+ case CACHE_MPAGE:
output_len += ata_msense_caching(args->id, &p, last);
break;
- case 0x0a: { /* control mode */
+ case CONTROL_MPAGE: {
output_len += ata_msense_ctl_mode(&p, last);
break;
}
- case 0x3f: /* all pages */
+ case ALL_MPAGES:
output_len += ata_msense_rw_recovery(&p, last);
output_len += ata_msense_caching(args->id, &p, last);
output_len += ata_msense_ctl_mode(&p, last);
@@ -1401,15 +1764,31 @@
goto invalid_fld;
}
+ if (minlen < 1)
+ return 0;
if (six_byte) {
output_len--;
rbuf[0] = output_len;
+ if (ebd) {
+ if (minlen > 3)
+ rbuf[3] = sizeof(sat_blk_desc);
+ if (minlen > 11)
+ memcpy(rbuf + 4, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
} else {
output_len -= 2;
rbuf[0] = output_len >> 8;
- rbuf[1] = output_len;
+ if (minlen > 1)
+ rbuf[1] = output_len;
+ if (ebd) {
+ if (minlen > 7)
+ rbuf[7] = sizeof(sat_blk_desc);
+ if (minlen > 15)
+ memcpy(rbuf + 8, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
}
-
return 0;
invalid_fld:
@@ -1623,7 +2002,12 @@
VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat);
if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
else if (unlikely(drv_stat & ATA_ERR)) {
DPRINTK("request check condition\n");
@@ -1782,6 +2166,143 @@
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ if (byte1 & 0xe0) {
+ return ATA_PROT_PIO_MULT;
+ }
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @cmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ return 1;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if ((tf->command == ATA_CMD_SET_FEATURES)
+ && (tf->feature == SETFEATURES_XFER))
+ return 1;
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+
+ return 0;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -1814,6 +2335,11 @@
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
@@ -1972,7 +2498,7 @@
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
break;
- /* mandantory commands we haven't implemented yet */
+ /* mandatory commands we haven't implemented yet */
case REQUEST_SENSE:
/* all other commands */
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3d60190..65c264b 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -50,13 +50,14 @@
unsigned int wait, unsigned int can_sleep);
extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
/* libata-scsi.c */
extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd);
extern void ata_scsi_scan_host(struct ata_port *ap);
-extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat);
extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 9820f27..af99feb 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
-#define DRV_VERSION "0.01"
+#define DRV_VERSION "0.03"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
@@ -79,7 +79,6 @@
aNIEN = (1 << 8), /* irq mask: 1==masked */
aGO = (1 << 7), /* packet trigger ("Go!") */
aRSTADM = (1 << 5), /* ADMA logic reset */
- aRSTA = (1 << 2), /* ATA hard reset */
aPIOMD4 = 0x0003, /* PIO mode 4 */
/* ADMA_STATUS register bits */
@@ -452,24 +451,25 @@
struct adma_port_priv *pp;
struct ata_queued_cmd *qc;
void __iomem *chan = ADMA_REGS(mmio_base, port_no);
- u8 drv_stat, status = readb(chan + ADMA_STATUS);
+ u8 drv_stat = 0, status = readb(chan + ADMA_STATUS);
if (status == 0)
continue;
handled = 1;
adma_enter_reg_mode(ap);
- if ((ap->flags & ATA_FLAG_PORT_DISABLED))
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- drv_stat = 0;
- if ((status & (aPERR | aPSD | aUIRQ)))
- drv_stat = ATA_ERR;
- else if (pp->pkt[0] != cDONE)
- drv_stat = ATA_ERR;
- ata_qc_complete(qc, drv_stat);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if ((status & (aPERR | aPSD | aUIRQ)))
+ drv_stat = ATA_ERR;
+ else if (pp->pkt[0] != cDONE)
+ drv_stat = ATA_ERR;
+ ata_qc_complete(qc, drv_stat);
+ }
}
return handled;
}
@@ -490,7 +490,7 @@
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
@@ -561,15 +561,15 @@
if ((pp->pkt_dma & 7) != 0) {
printk("bad alignment for pp->pkt_dma: %08x\n",
(u32)pp->pkt_dma);
- goto err_out_kfree2;
+ dma_free_coherent(dev, ADMA_PKT_BYTES,
+ pp->pkt, pp->pkt_dma);
+ goto err_out_kfree;
}
memset(pp->pkt, 0, ADMA_PKT_BYTES);
ap->private_data = pp;
adma_reinit_engine(ap);
return 0;
-err_out_kfree2:
- kfree(pp);
err_out_kfree:
kfree(pp);
err_out:
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index eee93b0..63911f1 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -195,6 +195,8 @@
static struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -207,6 +209,8 @@
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 250dafa..1aaf330 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -433,7 +433,7 @@
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 32d730b..51855d3 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -220,8 +220,8 @@
/* ap->host_set->private_data */
struct sil24_host_priv {
- void *host_base; /* global controller control (128 bytes @BAR0) */
- void *port_base; /* port registers (4 * 8192 bytes @BAR2) */
+ void __iomem *host_base; /* global controller control (128 bytes @BAR0) */
+ void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
static u8 sil24_check_status(struct ata_port *ap);
@@ -349,10 +349,12 @@
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
- void *port = (void *)ap->ioaddr.cmd_addr;
- struct sil24_prb *prb = port;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct sil24_prb __iomem *prb = port;
+ u8 fis[6 * 4];
- ata_tf_from_fis(prb->fis, &pp->tf);
+ memcpy_fromio(fis, prb->fis, 6 * 4);
+ ata_tf_from_fis(fis, &pp->tf);
}
static u8 sil24_check_status(struct ata_port *ap)
@@ -376,9 +378,9 @@
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
{
- void *scr_addr = (void *)ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
- void *addr;
+ void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
}
@@ -387,9 +389,9 @@
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
- void *scr_addr = (void *)ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
- void *addr;
+ void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
}
@@ -454,7 +456,7 @@
static int sil24_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- void *port = (void *)ap->ioaddr.cmd_addr;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
@@ -467,7 +469,7 @@
/* unused */
}
-static int __sil24_reset_controller(void *port)
+static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
u32 tmp;
@@ -493,7 +495,7 @@
{
printk(KERN_NOTICE DRV_NAME
" ata%u: resetting controller...\n", ap->id);
- if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr))
+ if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr))
printk(KERN_ERR DRV_NAME
" ata%u: failed to reset controller\n", ap->id);
}
@@ -527,7 +529,7 @@
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
struct sil24_port_priv *pp = ap->private_data;
- void *port = (void *)ap->ioaddr.cmd_addr;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 irq_stat, cmd_err, sstatus, serror;
irq_stat = readl(port + PORT_IRQ_STAT);
@@ -574,7 +576,7 @@
static inline void sil24_host_intr(struct ata_port *ap)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
- void *port = (void *)ap->ioaddr.cmd_addr;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 slot_stat;
slot_stat = readl(port + PORT_SLOT_STAT);
@@ -689,7 +691,8 @@
struct ata_port_info *pinfo = &sil24_port_info[board_id];
struct ata_probe_ent *probe_ent = NULL;
struct sil24_host_priv *hpriv = NULL;
- void *host_base = NULL, *port_base = NULL;
+ void __iomem *host_base = NULL;
+ void __iomem *port_base = NULL;
int i, rc;
if (!printed_version++)
@@ -771,7 +774,7 @@
writel(0, host_base + HOST_CTRL);
for (i = 0; i < probe_ent->n_ports; i++) {
- void *port = port_base + i * PORT_REGS_SIZE;
+ void __iomem *port = port_base + i * PORT_REGS_SIZE;
unsigned long portu = (unsigned long)port;
u32 tmp;
int cnt;
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index e0f9570..46208f5 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -84,6 +84,8 @@
/* Port stride */
#define K2_SATA_PORT_OFFSET 0x100
+static u8 k2_stat_check_status(struct ata_port *ap);
+
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
@@ -136,16 +138,24 @@
static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = k2_stat_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 5af05fd..54273e0 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -153,16 +153,24 @@
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = ata_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readb(ioaddr->error_addr);
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/drivers/tc/tc.c b/drivers/tc/tc.c
index a89ef4d..a0e5af6 100644
--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -8,33 +8,31 @@
* for more details.
*
* Copyright (c) Harald Koerfgen, 1998
- * Copyright (c) 2001, 2003 Maciej W. Rozycki
+ * Copyright (c) 2001, 2003, 2005 Maciej W. Rozycki
*/
-#include <linux/string.h>
#include <linux/init.h>
-#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
#include <asm/addrspace.h>
+#include <asm/bug.h>
#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/paccess.h>
+
#include <asm/dec/machtype.h>
#include <asm/dec/prom.h>
#include <asm/dec/tcinfo.h>
#include <asm/dec/tcmodule.h>
#include <asm/dec/interrupts.h>
-#include <asm/paccess.h>
-#include <asm/ptrace.h>
-
-#define TC_DEBUG
MODULE_LICENSE("GPL");
slot_info tc_bus[MAX_SLOT];
static int num_tcslots;
static tcinfo *info;
-unsigned long system_base;
-
/*
* Interface to the world. Read comment in include/asm-mips/tc.h.
*/
@@ -97,13 +95,16 @@
static void __init tc_probe(unsigned long startaddr, unsigned long size,
int slots)
{
+ unsigned long slotaddr;
int i, slot, err;
long offset;
- unsigned char pattern[4];
- unsigned char *module;
+ u8 pattern[4];
+ volatile u8 *module;
for (slot = 0; slot < slots; slot++) {
- module = (char *)(startaddr + slot * size);
+ slotaddr = startaddr + slot * size;
+ module = ioremap_nocache(slotaddr, size);
+ BUG_ON(!module);
offset = OLDCARD;
@@ -112,8 +113,10 @@
err |= get_dbe(pattern[1], module + OLDCARD + TC_PATTERN1);
err |= get_dbe(pattern[2], module + OLDCARD + TC_PATTERN2);
err |= get_dbe(pattern[3], module + OLDCARD + TC_PATTERN3);
- if (err)
+ if (err) {
+ iounmap(module);
continue;
+ }
if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
pattern[2] != 0xaa || pattern[3] != 0xff) {
@@ -124,16 +127,20 @@
err |= get_dbe(pattern[1], module + TC_PATTERN1);
err |= get_dbe(pattern[2], module + TC_PATTERN2);
err |= get_dbe(pattern[3], module + TC_PATTERN3);
- if (err)
+ if (err) {
+ iounmap(module);
continue;
+ }
}
if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
- pattern[2] != 0xaa || pattern[3] != 0xff)
+ pattern[2] != 0xaa || pattern[3] != 0xff) {
+ iounmap(module);
continue;
+ }
- tc_bus[slot].base_addr = (unsigned long)module;
- for(i = 0; i < 8; i++) {
+ tc_bus[slot].base_addr = slotaddr;
+ for (i = 0; i < 8; i++) {
tc_bus[slot].firmware[i] =
module[TC_FIRM_VER + offset + 4 * i];
tc_bus[slot].vendor[i] =
@@ -171,13 +178,15 @@
tc_bus[slot].interrupt = -1;
break;
}
+
+ iounmap(module);
}
}
/*
* the main entry
*/
-void __init tc_init(void)
+static int __init tc_init(void)
{
int tc_clock;
int i;
@@ -185,7 +194,7 @@
unsigned long slot_size;
if (!TURBOCHANNEL)
- return;
+ return 0;
for (i = 0; i < MAX_SLOT; i++) {
tc_bus[i].base_addr = 0;
@@ -196,8 +205,8 @@
tc_bus[i].flags = FREE;
}
- info = (tcinfo *) rex_gettcinfo();
- slot0addr = (unsigned long)KSEG1ADDR(rex_slot_address(0));
+ info = rex_gettcinfo();
+ slot0addr = CPHYSADDR((long)rex_slot_address(0));
switch (mips_machtype) {
case MACH_DS5000_200:
@@ -216,37 +225,24 @@
tc_clock = 10000 / info->clk_period;
- if (TURBOCHANNEL && info->slot_size && slot0addr) {
- printk("TURBOchannel rev. %1d at %2d.%1d MHz ", info->revision,
- tc_clock / 10, tc_clock % 10);
- printk("(with%s parity)\n", info->parity ? "" : "out");
+ if (info->slot_size && slot0addr) {
+ pr_info("TURBOchannel rev. %d at %d.%d MHz (with%s parity)\n",
+ info->revision, tc_clock / 10, tc_clock % 10,
+ info->parity ? "" : "out");
slot_size = info->slot_size << 20;
tc_probe(slot0addr, slot_size, num_tcslots);
- /*
- * All TURBOchannel DECstations have the onboard devices
- * where the (num_tcslots + 0 or 1 on DS5k/xx) Option Module
- * would be.
- */
- if(mips_machtype == MACH_DS5000_XX)
- i = 1;
- else
- i = 0;
-
- system_base = slot0addr + slot_size * (num_tcslots + i);
-
-#ifdef TC_DEBUG
- for (i = 0; i < num_tcslots; i++)
- if (tc_bus[i].base_addr) {
- printk(" slot %d: ", i);
- printk("%s %s %s\n", tc_bus[i].vendor,
- tc_bus[i].name, tc_bus[i].firmware);
- }
-#endif
- ioport_resource.end = KSEG2 - 1;
+ for (i = 0; i < num_tcslots; i++) {
+ if (!tc_bus[i].base_addr)
+ continue;
+ pr_info(" slot %d: %s %s %s\n", i, tc_bus[i].vendor,
+ tc_bus[i].name, tc_bus[i].firmware);
+ }
}
+
+ return 0;
}
subsys_initcall(tc_init);
@@ -257,4 +253,3 @@
EXPORT_SYMBOL(get_tc_base_addr);
EXPORT_SYMBOL(get_tc_irq_nr);
EXPORT_SYMBOL(get_tc_speed);
-EXPORT_SYMBOL(system_base);
diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c
index 6bed871..c52af73 100644
--- a/drivers/tc/zs.c
+++ b/drivers/tc/zs.c
@@ -65,14 +65,14 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
-#include <asm/dec/serial.h>
-#ifdef CONFIG_MACH_DECSTATION
#include <asm/dec/interrupts.h>
-#include <asm/dec/machtype.h>
-#include <asm/dec/tc.h>
#include <asm/dec/ioasic_addrs.h>
-#endif
+#include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
+#include <asm/dec/system.h>
+#include <asm/dec/tc.h>
+
#ifdef CONFIG_KGDB
#include <asm/kgdb.h>
#endif
@@ -192,18 +192,6 @@
static void change_speed(struct dec_serial *info);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char tmp_buf[4096]; /* This is cheating */
-static DECLARE_MUTEX(tmp_buf_sem);
-
static inline int serial_paranoia_check(struct dec_serial *info,
char *name, const char *routine)
{
@@ -1628,30 +1616,22 @@
return;
}
- /*
- * When serial console is activated, tc_init has not been called yet
- * and system_base is undefined. Unfortunately we have to hardcode
- * system_base for this case :-(. HK
- */
switch(mips_machtype) {
#ifdef CONFIG_MACH_DECSTATION
case MACH_DS5000_2X0:
case MACH_DS5900:
- system_base = KSEG1ADDR(0x1f800000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_1XX:
- system_base = KSEG1ADDR(0x1c000000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_XX:
- system_base = KSEG1ADDR(0x1c000000);
n_chips = 1;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
@@ -1673,10 +1653,10 @@
* The sccs reside on the high byte of the 16 bit IOBUS
*/
zs_channels[n_channels].control =
- (volatile unsigned char *)system_base +
+ (volatile void *)CKSEG1ADDR(dec_kn_slot_base +
(0 == chip ? zs_parms->scc0 : zs_parms->scc1) +
(0 == channel ? zs_parms->channel_a_offset :
- zs_parms->channel_b_offset);
+ zs_parms->channel_b_offset));
zs_channels[n_channels].data =
zs_channels[n_channels].control + 4;
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 3944a55..1dc3e0f 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -319,20 +319,8 @@
return -ENODEV;
}
- if (*ppos >= IMGSIZE) {
- up (&dev->sem);
- return 0;
- }
-
- count = min ((loff_t)count, IMGSIZE - (*ppos));
-
- if (copy_to_user (buffer, dev->bulk_in_buffer + *ppos, count)) {
- result = -EFAULT;
- } else {
- result = count;
- *ppos += count;
- }
-
+ result = simple_read_from_buffer(buffer, count, ppos,
+ dev->bulk_in_buffer, IMGSIZE);
/* unlock the device */
up(&dev->sem);
return result;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1cd942a..7e29794 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1376,7 +1376,7 @@
config FB_PMAG_AA
bool "PMAG-AA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1387,7 +1387,7 @@
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1398,7 +1398,7 @@
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1410,7 +1410,7 @@
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && MACH_DECSTATION
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 1fff29f..97c5d03 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -86,7 +86,7 @@
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_W100) += w100fb.o
-obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o
+obj-$(CONFIG_FB_AU1100) += au1100fb.o
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index b6fe30c..a512980 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -2,6 +2,11 @@
* BRIEF MODULE DESCRIPTION
* Au1100 LCD Driver.
*
+ * Rewritten for 2.6 by Embedded Alley Solutions
+ * <source@embeddedalley.com>, based on submissions by
+ * Karl Lessard <klessard@sunrisetelecom.com>
+ * <c.pellegrin@exadron.com>
+ *
* Copyright 2002 MontaVista Software
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
@@ -33,298 +38,253 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
-#include <asm/au1000.h>
-#include <asm/pb1100.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define DEBUG 0
+
#include "au1100fb.h"
-#include <video/fbcon.h>
-#include <video/fbcon-mfb.h>
-#include <video/fbcon-cfb2.h>
-#include <video/fbcon-cfb4.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
-
/*
* Sanity check. If this is a new Au1100 based board, search for
* the PB1100 ifdefs to make sure you modify the code accordingly.
*/
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_HYDROGEN3)
+#if defined(CONFIG_MIPS_PB1100)
+ #include <asm/mach-pb1x00/pb1100.h>
+#elif defined(CONFIG_MIPS_DB1100)
+ #include <asm/mach-db1x00/db1x00.h>
#else
-error Unknown Au1100 board
+ #error "Unknown Au1100 board, Au1100 FB driver not supported"
#endif
-#define CMAPSIZE 16
+#define DRIVER_NAME "au1100fb"
+#define DRIVER_DESC "LCD controller driver for AU1100 processors"
-static int my_lcd_index; /* default is zero */
-struct known_lcd_panels *p_lcd;
-AU1100_LCD *p_lcd_reg = (AU1100_LCD *)AU1100_LCD_ADDR;
+#define to_au1100fb_device(_info) \
+ (_info ? container_of(_info, struct au1100fb_device, info) : NULL);
-struct au1100fb_info {
- struct fb_info_gen gen;
- unsigned long fb_virt_start;
- unsigned long fb_size;
- unsigned long fb_phys;
- int mmaped;
- int nohwcursor;
-
- struct { unsigned red, green, blue, pad; } palette[256];
-
-#if defined(FBCON_HAS_CFB16)
- u16 fbcon_cmap16[16];
-#endif
-};
-
-
-struct au1100fb_par {
- struct fb_var_screeninfo var;
-
- int line_length; // in bytes
- int cmap_len; // color-map length
-};
-
-
-static struct au1100fb_info fb_info;
-static struct au1100fb_par current_par;
-static struct display disp;
-
-int au1100fb_init(void);
-void au1100fb_setup(char *options, int *ints);
-static int au1100fb_mmap(struct fb_info *fb, struct file *file,
- struct vm_area_struct *vma);
-static int au1100_blank(int blank_mode, struct fb_info_gen *info);
-static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg, int con, struct fb_info *info);
-
-void au1100_nocursor(struct display *p, int mode, int xx, int yy){};
-
-static struct fb_ops au1100fb_ops = {
- .owner = THIS_MODULE,
- .fb_get_fix = fbgen_get_fix,
- .fb_get_var = fbgen_get_var,
- .fb_set_var = fbgen_set_var,
- .fb_get_cmap = fbgen_get_cmap,
- .fb_set_cmap = fbgen_set_cmap,
- .fb_pan_display = fbgen_pan_display,
- .fb_ioctl = au1100fb_ioctl,
- .fb_mmap = au1100fb_mmap,
-};
-
-static void au1100_detect(void)
+/* Bitfields format supported by the controller. Note that the order of formats
+ * SHOULD be the same as in the LCD_CONTROL_SBPPF field, so we can retrieve the
+ * right pixel format by doing rgb_bitfields[LCD_CONTROL_SBPPF_XXX >> LCD_CONTROL_SBPPF]
+ */
+struct fb_bitfield rgb_bitfields[][4] =
{
- /*
- * This function should detect the current video mode settings
- * and store it as the default video mode
+ /* Red, Green, Blue, Transp */
+ { { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+ { { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
+ { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
+
+ /* The last is used to describe 12bpp format */
+ { { 8, 4, 0 }, { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
+};
+
+static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+ .id = "AU1100 FB",
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .type = FB_TYPE_PACKED_PIXELS,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo au1100fb_var __initdata = {
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct au1100fb_drv_info drv_info;
+
+/*
+ * Set hardware with var settings. This will enable the controller with a specific
+ * mode, normally validated with the fb_check_var method
*/
-
- /*
- * Yeh, well, we're not going to change any settings so we're
- * always stuck with the default ...
- */
-
-}
-
-static int au1100_encode_fix(struct fb_fix_screeninfo *fix,
- const void *_par, struct fb_info_gen *_info)
+int au1100fb_setmode(struct au1100fb_device *fbdev)
{
- struct au1100fb_info *info = (struct au1100fb_info *) _info;
- struct au1100fb_par *par = (struct au1100fb_par *) _par;
- struct fb_var_screeninfo *var = &par->var;
+ struct fb_info *info = &fbdev->info;
+ u32 words;
+ int index;
- memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+ if (!fbdev)
+ return -EINVAL;
- fix->smem_start = info->fb_phys;
- fix->smem_len = info->fb_size;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->type_aux = 0;
- fix->visual = (var->bits_per_pixel == 8) ?
- FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
- fix->ywrapstep = 0;
- fix->xpanstep = 1;
- fix->ypanstep = 1;
- fix->line_length = current_par.line_length;
+ /* Update var-dependent FB info */
+ if (panel_is_active(fbdev->panel) || panel_is_color(fbdev->panel)) {
+ if (info->var.bits_per_pixel <= 8) {
+ /* palettized */
+ info->var.red.offset = 0;
+ info->var.red.length = info->var.bits_per_pixel;
+ info->var.red.msb_right = 0;
+
+ info->var.green.offset = 0;
+ info->var.green.length = info->var.bits_per_pixel;
+ info->var.green.msb_right = 0;
+
+ info->var.blue.offset = 0;
+ info->var.blue.length = info->var.bits_per_pixel;
+ info->var.blue.msb_right = 0;
+
+ info->var.transp.offset = 0;
+ info->var.transp.length = 0;
+ info->var.transp.msb_right = 0;
+
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ info->fix.line_length = info->var.xres_virtual /
+ (8/info->var.bits_per_pixel);
+ } else {
+ /* non-palettized */
+ index = (fbdev->panel->control_base & LCD_CONTROL_SBPPF_MASK) >> LCD_CONTROL_SBPPF_BIT;
+ info->var.red = rgb_bitfields[index][0];
+ info->var.green = rgb_bitfields[index][1];
+ info->var.blue = rgb_bitfields[index][2];
+ info->var.transp = rgb_bitfields[index][3];
+
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */
+ }
+ } else {
+ /* mono */
+ info->fix.visual = FB_VISUAL_MONO10;
+ info->fix.line_length = info->var.xres_virtual / 8;
+ }
+
+ info->screen_size = info->fix.line_length * info->var.yres_virtual;
+
+ /* Determine BPP mode and format */
+ fbdev->regs->lcd_control = fbdev->panel->control_base |
+ ((info->var.rotate/90) << LCD_CONTROL_SM_BIT);
+
+ fbdev->regs->lcd_intenable = 0;
+ fbdev->regs->lcd_intstatus = 0;
+
+ fbdev->regs->lcd_horztiming = fbdev->panel->horztiming;
+
+ fbdev->regs->lcd_verttiming = fbdev->panel->verttiming;
+
+ fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base;
+
+ fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys);
+
+ if (panel_is_dual(fbdev->panel)) {
+ /* Second panel display seconf half of screen if possible,
+ * otherwise display the same as the first panel */
+ if (info->var.yres_virtual >= (info->var.yres << 1)) {
+ fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys +
+ (info->fix.line_length *
+ (info->var.yres_virtual >> 1)));
+ } else {
+ fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys);
+ }
+ }
+
+ words = info->fix.line_length / sizeof(u32);
+ if (!info->var.rotate || (info->var.rotate == 180)) {
+ words *= info->var.yres_virtual;
+ if (info->var.rotate /* 180 */) {
+ words -= (words % 8); /* should be divisable by 8 */
+ }
+ }
+ fbdev->regs->lcd_words = LCD_WRD_WRDS_N(words);
+
+ fbdev->regs->lcd_pwmdiv = 0;
+ fbdev->regs->lcd_pwmhi = 0;
+
+ /* Resume controller */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+
return 0;
}
-static void set_color_bitfields(struct fb_var_screeninfo *var)
+/* fb_setcolreg
+ * Set color in LCD palette.
+ */
+int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
{
- switch (var->bits_per_pixel) {
- case 8:
- var->red.offset = 0;
- var->red.length = 8;
- var->green.offset = 0;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- case 16: /* RGB 565 */
- var->red.offset = 11;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 6;
- var->blue.offset = 0;
- var->blue.length = 5;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- }
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ u32 *palette = fbdev->regs->lcd_pallettebase;
+ u32 value;
- var->red.msb_right = 0;
- var->green.msb_right = 0;
- var->blue.msb_right = 0;
- var->transp.msb_right = 0;
-}
-
-static int au1100_decode_var(const struct fb_var_screeninfo *var,
- void *_par, struct fb_info_gen *_info)
-{
-
- struct au1100fb_par *par = (struct au1100fb_par *)_par;
-
- /*
- * Don't allow setting any of these yet: xres and yres don't
- * make sense for LCD panels.
- */
- if (var->xres != p_lcd->xres ||
- var->yres != p_lcd->yres ||
- var->xres != p_lcd->xres ||
- var->yres != p_lcd->yres) {
+ if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
return -EINVAL;
- }
- if(var->bits_per_pixel != p_lcd->bpp) {
- return -EINVAL;
+
+ if (fbi->var.grayscale) {
+ /* Convert color to grayscale */
+ red = green = blue =
+ (19595 * red + 38470 * green + 7471 * blue) >> 16;
}
- memset(par, 0, sizeof(struct au1100fb_par));
- par->var = *var;
-
- /* FIXME */
- switch (var->bits_per_pixel) {
- case 8:
- par->var.bits_per_pixel = 8;
- break;
- case 16:
- par->var.bits_per_pixel = 16;
- break;
- default:
- printk("color depth %d bpp not supported\n",
- var->bits_per_pixel);
+ if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
+ /* Place color in the pseudopalette */
+ if (regno > 16)
return -EINVAL;
- }
- set_color_bitfields(&par->var);
- par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16;
- return 0;
-}
+ palette = (u32*)fbi->pseudo_palette;
-static int au1100_encode_var(struct fb_var_screeninfo *var,
- const void *par, struct fb_info_gen *_info)
-{
+ red >>= (16 - fbi->var.red.length);
+ green >>= (16 - fbi->var.green.length);
+ blue >>= (16 - fbi->var.blue.length);
- *var = ((struct au1100fb_par *)par)->var;
- return 0;
-}
+ value = (red << fbi->var.red.offset) |
+ (green << fbi->var.green.offset)|
+ (blue << fbi->var.blue.offset);
+ value &= 0xFFFF;
-static void
-au1100_get_par(void *_par, struct fb_info_gen *_info)
-{
- *(struct au1100fb_par *)_par = current_par;
-}
+ } else if (panel_is_active(fbdev->panel)) {
+ /* COLOR TFT PALLETTIZED (use RGB 565) */
+ value = (red & 0xF800)|((green >> 5) & 0x07E0)|((blue >> 11) & 0x001F);
+ value &= 0xFFFF;
-static void au1100_set_par(const void *par, struct fb_info_gen *info)
-{
- /* nothing to do: we don't change any settings */
-}
-
-static int au1100_getcolreg(unsigned regno, unsigned *red, unsigned *green,
- unsigned *blue, unsigned *transp,
- struct fb_info *info)
-{
-
- struct au1100fb_info* i = (struct au1100fb_info*)info;
-
- if (regno > 255)
- return 1;
-
- *red = i->palette[regno].red;
- *green = i->palette[regno].green;
- *blue = i->palette[regno].blue;
- *transp = 0;
-
- return 0;
-}
-
-static int au1100_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp,
- struct fb_info *info)
-{
- struct au1100fb_info* i = (struct au1100fb_info *)info;
- u32 rgbcol;
-
- if (regno > 255)
- return 1;
-
- i->palette[regno].red = red;
- i->palette[regno].green = green;
- i->palette[regno].blue = blue;
-
- switch(p_lcd->bpp) {
-#ifdef FBCON_HAS_CFB8
- case 8:
- red >>= 10;
- green >>= 10;
- blue >>= 10;
- p_lcd_reg->lcd_pallettebase[regno] = (blue&0x1f) |
- ((green&0x3f)<<5) | ((red&0x1f)<<11);
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- i->fbcon_cmap16[regno] =
- ((red & 0xf800) >> 0) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11);
- break;
-#endif
- default:
- break;
+ } else if (panel_is_color(fbdev->panel)) {
+ /* COLOR STN MODE */
+ value = (((panel_swap_rgb(fbdev->panel) ? blue : red) >> 12) & 0x000F) |
+ ((green >> 8) & 0x00F0) |
+ (((panel_swap_rgb(fbdev->panel) ? red : blue) >> 4) & 0x0F00);
+ value &= 0xFFF;
+ } else {
+ /* MONOCHROME MODE */
+ value = (green >> 12) & 0x000F;
+ value &= 0xF;
}
+ palette[regno] = value;
+
return 0;
}
-
-static int au1100_blank(int blank_mode, struct fb_info_gen *_info)
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
switch (blank_mode) {
+
case VESA_NO_BLANKING:
- /* turn on panel */
- //printk("turn on panel\n");
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
- au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
-#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
- /* Turn controller & power supply on, GPIO213 */
- au_writel(0x20002000, 0xB1700008);
- au_writel(0x00040000, 0xB1900108);
- au_writel(0x01000100, 0xB1700008);
+ }
#endif
au_sync();
break;
@@ -332,12 +292,14 @@
case VESA_VSYNC_SUSPEND:
case VESA_HSYNC_SUSPEND:
case VESA_POWERDOWN:
- /* turn off panel */
- //printk("turn off panel\n");
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- au_writew(au_readw(PB1100_G_CONTROL) & ~p_lcd->mode_backlight,
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
- p_lcd_reg->lcd_control &= ~LCD_CONTROL_GO;
+ }
#endif
au_sync();
break;
@@ -348,49 +310,87 @@
return 0;
}
-static void au1100_set_disp(const void *unused, struct display *disp,
- struct fb_info_gen *info)
+/* fb_pan_display
+ * Pan display in x and/or y as specified
+ */
+int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- disp->screen_base = (char *)fb_info.fb_virt_start;
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ int dy;
- switch (disp->var.bits_per_pixel) {
-#ifdef FBCON_HAS_CFB8
- case 8:
- disp->dispsw = &fbcon_cfb8;
- if (fb_info.nohwcursor)
- fbcon_cfb8.cursor = au1100_nocursor;
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- disp->dispsw = &fbcon_cfb16;
- disp->dispsw_data = fb_info.fbcon_cmap16;
- if (fb_info.nohwcursor)
- fbcon_cfb16.cursor = au1100_nocursor;
- break;
-#endif
- default:
- disp->dispsw = &fbcon_dummy;
- disp->dispsw_data = NULL;
- break;
+ print_dbg("fb_pan_display %p %p", var, fbi);
+
+ if (!var || !fbdev) {
+ return -EINVAL;
+ }
+
+ if (var->xoffset - fbi->var.xoffset) {
+ /* No support for X panning for now! */
+ return -EINVAL;
+ }
+
+ print_dbg("fb_pan_display 2 %p %p", var, fbi);
+ dy = var->yoffset - fbi->var.yoffset;
+ if (dy) {
+
+ u32 dmaaddr;
+
+ print_dbg("Panning screen of %d lines", dy);
+
+ dmaaddr = fbdev->regs->lcd_dmaaddr0;
+ dmaaddr += (fbi->fix.line_length * dy);
+
+ /* TODO: Wait for current frame to finished */
+ fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
+
+ if (panel_is_dual(fbdev->panel)) {
+ dmaaddr = fbdev->regs->lcd_dmaaddr1;
+ dmaaddr += (fbi->fix.line_length * dy);
+ fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
+ }
+ }
+ print_dbg("fb_pan_display 3 %p %p", var, fbi);
+
+ return 0;
+}
+
+/* fb_rotate
+ * Rotate the display of this angle. This doesn't seems to be used by the core,
+ * but as our hardware supports it, so why not implementing it...
+ */
+void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_rotate %p %d", fbi, angle);
+
+ if (fbdev && (angle > 0) && !(angle % 90)) {
+
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+
+ fbdev->regs->lcd_control &= ~(LCD_CONTROL_SM_MASK);
+ fbdev->regs->lcd_control |= ((angle/90) << LCD_CONTROL_SM_BIT);
+
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
}
}
-static int
-au1100fb_mmap(struct fb_info *_fb,
- struct file *file,
- struct vm_area_struct *vma)
+/* fb_mmap
+ * Map video memory in user space. We don't use the generic fb_mmap method mainly
+ * to allow the use of the TLB streaming flag (CCA=6)
+ */
+int au1100fb_fb_mmap(struct fb_info *fbi, struct file *file, struct vm_area_struct *vma)
{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
unsigned int len;
unsigned long start=0, off;
- struct au1100fb_info *fb = (struct au1100fb_info *)_fb;
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
}
- start = fb_info.fb_phys & PAGE_MASK;
- len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info.fb_size);
+ start = fbdev->fb_phys & PAGE_MASK;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
off = vma->vm_pgoff << PAGE_SHIFT;
@@ -401,276 +401,309 @@
off += start;
vma->vm_pgoff = off >> PAGE_SHIFT;
- pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK;
- //pgprot_val(vma->vm_page_prot) |= _CACHE_CACHABLE_NONCOHERENT;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
- /* This is an IO map - tell maydump to skip this VMA */
vma->vm_flags |= VM_IO;
- if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ if (io_remap_page_range(vma, vma->vm_start, off,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;
}
- fb->mmaped = 1;
return 0;
}
-int au1100_pan_display(const struct fb_var_screeninfo *var,
- struct fb_info_gen *info)
+static struct fb_ops au1100fb_ops =
{
- return 0;
-}
-
-static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg, int con, struct fb_info *info)
-{
- /* nothing to do yet */
- return -EINVAL;
-}
-
-static struct fbgen_hwswitch au1100_switch = {
- au1100_detect,
- au1100_encode_fix,
- au1100_decode_var,
- au1100_encode_var,
- au1100_get_par,
- au1100_set_par,
- au1100_getcolreg,
- au1100_setcolreg,
- au1100_pan_display,
- au1100_blank,
- au1100_set_disp
+ .owner = THIS_MODULE,
+ .fb_setcolreg = au1100fb_fb_setcolreg,
+ .fb_blank = au1100fb_fb_blank,
+ .fb_pan_display = au1100fb_fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_rotate = au1100fb_fb_rotate,
+ .fb_mmap = au1100fb_fb_mmap,
};
-int au1100_setmode(void)
+/*-------------------------------------------------------------------------*/
+
+/* AU1100 LCD controller device driver */
+
+int au1100fb_drv_probe(struct device *dev)
{
- int words;
-
- /* FIXME Need to accomodate for swivel mode and 12bpp, <8bpp*/
- switch (p_lcd->mode_control & LCD_CONTROL_SM)
- {
- case LCD_CONTROL_SM_0:
- case LCD_CONTROL_SM_180:
- words = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 32;
- break;
- case LCD_CONTROL_SM_90:
- case LCD_CONTROL_SM_270:
- /* is this correct? */
- words = (p_lcd->xres * p_lcd->bpp) / 8;
- break;
- default:
- printk("mode_control reg not initialized\n");
- return -EINVAL;
- }
-
- /*
- * Setup LCD controller
- */
-
- p_lcd_reg->lcd_control = p_lcd->mode_control;
- p_lcd_reg->lcd_intstatus = 0;
- p_lcd_reg->lcd_intenable = 0;
- p_lcd_reg->lcd_horztiming = p_lcd->mode_horztiming;
- p_lcd_reg->lcd_verttiming = p_lcd->mode_verttiming;
- p_lcd_reg->lcd_clkcontrol = p_lcd->mode_clkcontrol;
- p_lcd_reg->lcd_words = words - 1;
- p_lcd_reg->lcd_dmaaddr0 = fb_info.fb_phys;
-
- /* turn on panel */
-#ifdef CONFIG_MIPS_PB1100
- au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
- PB1100_G_CONTROL);
-#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
- /* Turn controller & power supply on, GPIO213 */
- au_writel(0x20002000, 0xB1700008);
- au_writel(0x00040000, 0xB1900108);
- au_writel(0x01000100, 0xB1700008);
-#endif
-
- p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
-
- return 0;
-}
-
-
-int __init au1100fb_init(void)
-{
- uint32 sys_clksrc;
+ struct au1100fb_device *fbdev = NULL;
+ struct resource *regs_res;
unsigned long page;
+ u32 sys_clksrc;
- /*
- * Get the panel information/display mode and update the registry
- */
- p_lcd = &panels[my_lcd_index];
+ if (!dev)
+ return -EINVAL;
- switch (p_lcd->mode_control & LCD_CONTROL_SM)
- {
- case LCD_CONTROL_SM_0:
- case LCD_CONTROL_SM_180:
- p_lcd->xres =
- (p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
- p_lcd->yres =
- (p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
- break;
- case LCD_CONTROL_SM_90:
- case LCD_CONTROL_SM_270:
- p_lcd->yres =
- (p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
- p_lcd->xres =
- (p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
- break;
- }
-
- /*
- * Panel dimensions x bpp must be divisible by 32
- */
- if (((p_lcd->yres * p_lcd->bpp) % 32) != 0)
- printk("VERT %% 32\n");
- if (((p_lcd->xres * p_lcd->bpp) % 32) != 0)
- printk("HORZ %% 32\n");
-
- /*
- * Allocate LCD framebuffer from system memory
- */
- fb_info.fb_size = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 8;
-
- current_par.var.xres = p_lcd->xres;
- current_par.var.xres_virtual = p_lcd->xres;
- current_par.var.yres = p_lcd->yres;
- current_par.var.yres_virtual = p_lcd->yres;
- current_par.var.bits_per_pixel = p_lcd->bpp;
-
- /* FIX!!! only works for 8/16 bpp */
- current_par.line_length = p_lcd->xres * p_lcd->bpp / 8; /* in bytes */
- fb_info.fb_virt_start = (unsigned long )
- __get_free_pages(GFP_ATOMIC | GFP_DMA,
- get_order(fb_info.fb_size + 0x1000));
- if (!fb_info.fb_virt_start) {
- printk("Unable to allocate fb memory\n");
+ /* Allocate new device private */
+ if (!(fbdev = kmalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
+ print_err("fail to allocate device private record");
return -ENOMEM;
}
- fb_info.fb_phys = virt_to_bus((void *)fb_info.fb_virt_start);
+ memset((void*)fbdev, 0, sizeof(struct au1100fb_device));
+
+ fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
+
+ dev_set_drvdata(dev, (void*)fbdev);
+
+ /* Allocate region for our registers and map them */
+ if (!(regs_res = platform_get_resource(to_platform_device(dev),
+ IORESOURCE_MEM, 0))) {
+ print_err("fail to retrieve registers resource");
+ return -EFAULT;
+ }
+
+ au1100fb_fix.mmio_start = regs_res->start;
+ au1100fb_fix.mmio_len = regs_res->end - regs_res->start + 1;
+
+ if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
+ DRIVER_NAME)) {
+ print_err("fail to lock memory region at 0x%08x",
+ au1100fb_fix.mmio_start);
+ return -EBUSY;
+ }
+
+ fbdev->regs = (struct au1100fb_regs*)KSEG1ADDR(au1100fb_fix.mmio_start);
+
+ print_dbg("Register memory map at %p", fbdev->regs);
+ print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
+
+
+
+ /* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
+ fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
+ (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
+
+ fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ &fbdev->fb_phys, GFP_KERNEL);
+ if (!fbdev->fb_mem) {
+ print_err("fail to allocate frambuffer (size: %dK))",
+ fbdev->fb_len / 1024);
+ return -ENOMEM;
+ }
+
+ au1100fb_fix.smem_start = fbdev->fb_phys;
+ au1100fb_fix.smem_len = fbdev->fb_len;
/*
* Set page reserved so that mmap will work. This is necessary
* since we'll be remapping normal memory.
*/
- for (page = fb_info.fb_virt_start;
- page < PAGE_ALIGN(fb_info.fb_virt_start + fb_info.fb_size);
+ for (page = (unsigned long)fbdev->fb_mem;
+ page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
page += PAGE_SIZE) {
+#if CONFIG_DMA_NONCOHERENT
+ SetPageReserved(virt_to_page(CAC_ADDR(page)));
+#else
SetPageReserved(virt_to_page(page));
+#endif
}
- memset((void *)fb_info.fb_virt_start, 0, fb_info.fb_size);
+ print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
+ print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
- /* set freqctrl now to allow more time to stabilize */
- /* zero-out out LCD bits */
- sys_clksrc = au_readl(SYS_CLKSRC) & ~0x000003e0;
- sys_clksrc |= p_lcd->mode_toyclksrc;
- au_writel(sys_clksrc, SYS_CLKSRC);
+ /* Setup LCD clock to AUX (48 MHz) */
+ sys_clksrc = au_readl(SYS_CLKSRC) & ~(SYS_CS_ML_MASK | SYS_CS_DL | SYS_CS_CL);
+ au_writel((sys_clksrc | (1 << SYS_CS_ML_BIT)), SYS_CLKSRC);
- /* FIXME add check to make sure auxpll is what is expected! */
- au1100_setmode();
+ /* load the panel info into the var struct */
+ au1100fb_var.bits_per_pixel = fbdev->panel->bpp;
+ au1100fb_var.xres = fbdev->panel->xres;
+ au1100fb_var.xres_virtual = au1100fb_var.xres;
+ au1100fb_var.yres = fbdev->panel->yres;
+ au1100fb_var.yres_virtual = au1100fb_var.yres;
- fb_info.gen.parsize = sizeof(struct au1100fb_par);
- fb_info.gen.fbhw = &au1100_switch;
+ fbdev->info.screen_base = fbdev->fb_mem;
+ fbdev->info.fbops = &au1100fb_ops;
+ fbdev->info.fix = au1100fb_fix;
- strcpy(fb_info.gen.info.modename, "Au1100 LCD");
- fb_info.gen.info.changevar = NULL;
- fb_info.gen.info.node = -1;
+ if (!(fbdev->info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL))) {
+ return -ENOMEM;
+ }
+ memset(fbdev->info.pseudo_palette, 0, sizeof(u32) * 16);
- fb_info.gen.info.fbops = &au1100fb_ops;
- fb_info.gen.info.disp = &disp;
- fb_info.gen.info.switch_con = &fbgen_switch;
- fb_info.gen.info.updatevar = &fbgen_update_var;
- fb_info.gen.info.blank = &fbgen_blank;
- fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT;
+ if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+ print_err("Fail to allocate colormap (%d entries)",
+ AU1100_LCD_NBR_PALETTE_ENTRIES);
+ kfree(fbdev->info.pseudo_palette);
+ return -EFAULT;
+ }
- /* This should give a reasonable default video mode */
- fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
- fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
- fbgen_set_disp(-1, &fb_info.gen);
- fbgen_install_cmap(0, &fb_info.gen);
- if (register_framebuffer(&fb_info.gen.info) < 0)
- return -EINVAL;
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- GET_FB_IDX(fb_info.gen.info.node),
- fb_info.gen.info.modename);
+ fbdev->info.var = au1100fb_var;
+
+ /* Set h/w registers */
+ au1100fb_setmode(fbdev);
+
+ /* Register new framebuffer */
+ if (register_framebuffer(&fbdev->info) < 0) {
+ print_err("cannot register new framebuffer");
+ goto failed;
+ }
+
+ return 0;
+
+failed:
+ if (fbdev->regs) {
+ release_mem_region(fbdev->regs_phys, fbdev->regs_len);
+ }
+ if (fbdev->fb_mem) {
+ dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys);
+ }
+ if (fbdev->info.cmap.len != 0) {
+ fb_dealloc_cmap(&fbdev->info.cmap);
+ }
+ kfree(fbdev);
+ dev_set_drvdata(dev, NULL);
return 0;
}
-
-void au1100fb_cleanup(struct fb_info *info)
+int au1100fb_drv_remove(struct device *dev)
{
- unregister_framebuffer(info);
+ struct au1100fb_device *fbdev = NULL;
+
+ if (!dev)
+ return -ENODEV;
+
+ fbdev = (struct au1100fb_device*) dev_get_drvdata(dev);
+
+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
+ au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
+#endif
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+
+ /* Clean up all probe data */
+ unregister_framebuffer(&fbdev->info);
+
+ release_mem_region(fbdev->regs_phys, fbdev->regs_len);
+
+ dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys);
+
+ fb_dealloc_cmap(&fbdev->info.cmap);
+ kfree(fbdev->info.pseudo_palette);
+ kfree((void*)fbdev);
+
+ return 0;
}
+int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ /* TODO */
+ return 0;
+}
-void au1100fb_setup(char *options, int *ints)
+int au1100fb_drv_resume(struct device *dev, u32 level)
+{
+ /* TODO */
+ return 0;
+}
+
+static struct device_driver au1100fb_driver = {
+ .name = "au1100-lcd",
+ .bus = &platform_bus_type,
+
+ .probe = au1100fb_drv_probe,
+ .remove = au1100fb_drv_remove,
+ .suspend = au1100fb_drv_suspend,
+ .resume = au1100fb_drv_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Kernel driver */
+
+int au1100fb_setup(char *options)
{
char* this_opt;
- int i;
- int num_panels = sizeof(panels)/sizeof(struct known_lcd_panels);
+ int num_panels = ARRAY_SIZE(known_lcd_panels);
+ char* mode = NULL;
+ int panel_idx = 0;
-
- if (!options || !*options)
- return;
-
- for(this_opt=strtok(options, ","); this_opt;
- this_opt=strtok(NULL, ",")) {
- if (!strncmp(this_opt, "panel:", 6)) {
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100)
- /* Read Pb1100 Switch S10 ? */
- if (!strncmp(this_opt+6, "s10", 3))
- {
- int panel;
- panel = *(volatile int *)0xAE000008; /* BCSR SWITCHES */
- panel >>= 8;
- panel &= 0x0F;
- if (panel >= num_panels) panel = 0;
- my_lcd_index = panel;
+ if (num_panels <= 0) {
+ print_err("No LCD panels supported by driver!");
+ return -EFAULT;
}
- else
-#endif
- /* Get the panel name, everything else if fixed */
- for (i=0; i<num_panels; i++) {
- if (!strncmp(this_opt+6, panels[i].panel_name,
+
+ if (options) {
+ while ((this_opt = strsep(&options,",")) != NULL) {
+ /* Panel option */
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ this_opt += 6;
+ for (i = 0; i < num_panels; i++) {
+ if (!strncmp(this_opt,
+ known_lcd_panels[i].name,
strlen(this_opt))) {
- my_lcd_index = i;
+ panel_idx = i;
break;
}
}
+ if (i >= num_panels) {
+ print_warn("Panel %s not supported!", this_opt);
+ }
+ }
+ /* Mode option (only option that start with digit) */
+ else if (isdigit(this_opt[0])) {
+ mode = kmalloc(strlen(this_opt) + 1, GFP_KERNEL);
+ strncpy(mode, this_opt, strlen(this_opt) + 1);
+ }
+ /* Unsupported option */
+ else {
+ print_warn("Unsupported option \"%s\"", this_opt);
}
- else if (!strncmp(this_opt, "nohwcursor", 10)) {
- printk("nohwcursor\n");
- fb_info.nohwcursor = 1;
}
}
- printk("au1100fb: Panel %d %s\n", my_lcd_index,
- panels[my_lcd_index].panel_name);
+ drv_info.panel_idx = panel_idx;
+ drv_info.opt_mode = mode;
+
+ print_info("Panel=%s Mode=%s",
+ known_lcd_panels[drv_info.panel_idx].name,
+ drv_info.opt_mode ? drv_info.opt_mode : "default");
+
+ return 0;
}
+int __init au1100fb_init(void)
+{
+ char* options;
+ int ret;
+ print_info("" DRIVER_DESC "");
-#ifdef MODULE
+ memset(&drv_info, 0, sizeof(drv_info));
+
+ if (fb_get_options(DRIVER_NAME, &options))
+ return -ENODEV;
+
+ /* Setup driver with options */
+ ret = au1100fb_setup(options);
+ if (ret < 0) {
+ print_err("Fail to setup driver");
+ return ret;
+ }
+
+ return driver_register(&au1100fb_driver);
+}
+
+void __exit au1100fb_cleanup(void)
+{
+ driver_unregister(&au1100fb_driver);
+
+ if (drv_info.opt_mode)
+ kfree(drv_info.opt_mode);
+}
+
+module_init(au1100fb_init);
+module_exit(au1100fb_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-int init_module(void)
-{
- return au1100fb_init();
-}
-
-void cleanup_module(void)
-{
- au1100fb_cleanup(void);
-}
-
-MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
-MODULE_DESCRIPTION("Au1100 LCD framebuffer device driver");
-#endif /* MODULE */
diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h
index 657c560..2855534 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/au1100fb.h
@@ -30,352 +30,352 @@
#ifndef _AU1100LCD_H
#define _AU1100LCD_H
-/********************************************************************/
-#define uint32 unsigned long
-typedef volatile struct
-{
- uint32 lcd_control;
- uint32 lcd_intstatus;
- uint32 lcd_intenable;
- uint32 lcd_horztiming;
- uint32 lcd_verttiming;
- uint32 lcd_clkcontrol;
- uint32 lcd_dmaaddr0;
- uint32 lcd_dmaaddr1;
- uint32 lcd_words;
- uint32 lcd_pwmdiv;
- uint32 lcd_pwmhi;
- uint32 reserved[(0x0400-0x002C)/4];
- uint32 lcd_pallettebase[256];
+#include <asm/mach-au1x00/au1000.h>
-} AU1100_LCD;
+#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
+#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
+#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
-/********************************************************************/
-
-#define AU1100_LCD_ADDR 0xB5000000
-
-/*
- * Register bit definitions
- */
-
-/* lcd_control */
-#define LCD_CONTROL_SBPPF (7<<18)
-#define LCD_CONTROL_SBPPF_655 (0<<18)
-#define LCD_CONTROL_SBPPF_565 (1<<18)
-#define LCD_CONTROL_SBPPF_556 (2<<18)
-#define LCD_CONTROL_SBPPF_1555 (3<<18)
-#define LCD_CONTROL_SBPPF_5551 (4<<18)
-#define LCD_CONTROL_WP (1<<17)
-#define LCD_CONTROL_WD (1<<16)
-#define LCD_CONTROL_C (1<<15)
-#define LCD_CONTROL_SM (3<<13)
-#define LCD_CONTROL_SM_0 (0<<13)
-#define LCD_CONTROL_SM_90 (1<<13)
-#define LCD_CONTROL_SM_180 (2<<13)
-#define LCD_CONTROL_SM_270 (3<<13)
-#define LCD_CONTROL_DB (1<<12)
-#define LCD_CONTROL_CCO (1<<11)
-#define LCD_CONTROL_DP (1<<10)
-#define LCD_CONTROL_PO (3<<8)
-#define LCD_CONTROL_PO_00 (0<<8)
-#define LCD_CONTROL_PO_01 (1<<8)
-#define LCD_CONTROL_PO_10 (2<<8)
-#define LCD_CONTROL_PO_11 (3<<8)
-#define LCD_CONTROL_MPI (1<<7)
-#define LCD_CONTROL_PT (1<<6)
-#define LCD_CONTROL_PC (1<<5)
-#define LCD_CONTROL_BPP (7<<1)
-#define LCD_CONTROL_BPP_1 (0<<1)
-#define LCD_CONTROL_BPP_2 (1<<1)
-#define LCD_CONTROL_BPP_4 (2<<1)
-#define LCD_CONTROL_BPP_8 (3<<1)
-#define LCD_CONTROL_BPP_12 (4<<1)
-#define LCD_CONTROL_BPP_16 (5<<1)
-#define LCD_CONTROL_GO (1<<0)
-
-/* lcd_intstatus, lcd_intenable */
-#define LCD_INT_SD (1<<7)
-#define LCD_INT_OF (1<<6)
-#define LCD_INT_UF (1<<5)
-#define LCD_INT_SA (1<<3)
-#define LCD_INT_SS (1<<2)
-#define LCD_INT_S1 (1<<1)
-#define LCD_INT_S0 (1<<0)
-
-/* lcd_horztiming */
-#define LCD_HORZTIMING_HN2 (255<<24)
-#define LCD_HORZTIMING_HN2_N(N) (((N)-1)<<24)
-#define LCD_HORZTIMING_HN1 (255<<16)
-#define LCD_HORZTIMING_HN1_N(N) (((N)-1)<<16)
-#define LCD_HORZTIMING_HPW (63<<10)
-#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<10)
-#define LCD_HORZTIMING_PPL (1023<<0)
-#define LCD_HORZTIMING_PPL_N(N) (((N)-1)<<0)
-
-/* lcd_verttiming */
-#define LCD_VERTTIMING_VN2 (255<<24)
-#define LCD_VERTTIMING_VN2_N(N) (((N)-1)<<24)
-#define LCD_VERTTIMING_VN1 (255<<16)
-#define LCD_VERTTIMING_VN1_N(N) (((N)-1)<<16)
-#define LCD_VERTTIMING_VPW (63<<10)
-#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<10)
-#define LCD_VERTTIMING_LPP (1023<<0)
-#define LCD_VERTTIMING_LPP_N(N) (((N)-1)<<0)
-
-/* lcd_clkcontrol */
-#define LCD_CLKCONTROL_IB (1<<18)
-#define LCD_CLKCONTROL_IC (1<<17)
-#define LCD_CLKCONTROL_IH (1<<16)
-#define LCD_CLKCONTROL_IV (1<<15)
-#define LCD_CLKCONTROL_BF (31<<10)
-#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10)
-#define LCD_CLKCONTROL_PCD (1023<<0)
-#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0)
-
-/* lcd_pwmdiv */
-#define LCD_PWMDIV_EN (1<<12)
-#define LCD_PWMDIV_PWMDIV (2047<<0)
-#define LCD_PWMDIV_PWMDIV_N(N) (((N)-1)<<0)
-
-/* lcd_pwmhi */
-#define LCD_PWMHI_PWMHI1 (2047<<12)
-#define LCD_PWMHI_PWMHI1_N(N) ((N)<<12)
-#define LCD_PWMHI_PWMHI0 (2047<<0)
-#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0)
-
-/* lcd_pallettebase - MONOCHROME */
-#define LCD_PALLETTE_MONO_MI (15<<0)
-#define LCD_PALLETTE_MONO_MI_N(N) ((N)<<0)
-
-/* lcd_pallettebase - COLOR */
-#define LCD_PALLETTE_COLOR_BI (15<<8)
-#define LCD_PALLETTE_COLOR_BI_N(N) ((N)<<8)
-#define LCD_PALLETTE_COLOR_GI (15<<4)
-#define LCD_PALLETTE_COLOR_GI_N(N) ((N)<<4)
-#define LCD_PALLETTE_COLOR_RI (15<<0)
-#define LCD_PALLETTE_COLOR_RI_N(N) ((N)<<0)
-
-/* lcd_palletebase - COLOR TFT PALLETIZED */
-#define LCD_PALLETTE_TFT_DC (65535<<0)
-#define LCD_PALLETTE_TFT_DC_N(N) ((N)<<0)
-
-/********************************************************************/
-
-struct known_lcd_panels
-{
- uint32 xres;
- uint32 yres;
- uint32 bpp;
- unsigned char panel_name[256];
- uint32 mode_control;
- uint32 mode_horztiming;
- uint32 mode_verttiming;
- uint32 mode_clkcontrol;
- uint32 mode_pwmdiv;
- uint32 mode_pwmhi;
- uint32 mode_toyclksrc;
- uint32 mode_backlight;
-
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_11
+#if DEBUG
+#define print_dbg(f, arg...) printk(__FILE__ ": " f "\n", ## arg)
#else
-#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_00
+#define print_dbg(f, arg...) do {} while (0)
#endif
-/*
- * The fb driver assumes that AUX PLL is at 48MHz. That can
- * cover up to 800x600 resolution; if you need higher resolution,
- * you should modify the driver as needed, not just this structure.
- */
-struct known_lcd_panels panels[] =
-{
- { /* 0: Pb1100 LCDA: Sharp 320x240 TFT panel */
- 320, /* xres */
- 240, /* yres */
- 16, /* bpp */
+#if defined(__BIG_ENDIAN)
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
+#else
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
+#endif
+#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
- "Sharp_320x240_16",
- /* mode_control */
+/********************************************************************/
+
+/* LCD controller restrictions */
+#define AU1100_LCD_MAX_XRES 800
+#define AU1100_LCD_MAX_YRES 600
+#define AU1100_LCD_MAX_BPP 16
+#define AU1100_LCD_MAX_CLK 48000000
+#define AU1100_LCD_NBR_PALETTE_ENTRIES 256
+
+/* Default number of visible screen buffer to allocate */
+#define AU1100FB_NBR_VIDEO_BUFFERS 4
+
+/********************************************************************/
+
+struct au1100fb_panel
+{
+ const char name[25]; /* Full name <vendor>_<model> */
+
+ u32 control_base; /* Mode-independent control values */
+ u32 clkcontrol_base; /* Panel pixclock preferences */
+
+ u32 horztiming;
+ u32 verttiming;
+
+ u32 xres; /* Maximum horizontal resolution */
+ u32 yres; /* Maximum vertical resolution */
+ u32 bpp; /* Maximum depth supported */
+};
+
+struct au1100fb_regs
+{
+ u32 lcd_control;
+ u32 lcd_intstatus;
+ u32 lcd_intenable;
+ u32 lcd_horztiming;
+ u32 lcd_verttiming;
+ u32 lcd_clkcontrol;
+ u32 lcd_dmaaddr0;
+ u32 lcd_dmaaddr1;
+ u32 lcd_words;
+ u32 lcd_pwmdiv;
+ u32 lcd_pwmhi;
+ u32 reserved[(0x0400-0x002C)/4];
+ u32 lcd_pallettebase[256];
+};
+
+struct au1100fb_device {
+
+ struct fb_info info; /* FB driver info record */
+
+ struct au1100fb_panel *panel; /* Panel connected to this device */
+
+ struct au1100fb_regs* regs; /* Registers memory map */
+ size_t regs_len;
+ unsigned int regs_phys;
+
+ unsigned char* fb_mem; /* FrameBuffer memory map */
+ size_t fb_len;
+ dma_addr_t fb_phys;
+};
+
+/********************************************************************/
+
+#define LCD_CONTROL (AU1100_LCD_BASE + 0x0)
+ #define LCD_CONTROL_SBB_BIT 21
+ #define LCD_CONTROL_SBB_MASK (0x3 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_1 (0 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_2 (1 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_3 (2 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_4 (3 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBPPF_BIT 18
+ #define LCD_CONTROL_SBPPF_MASK (0x7 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_655 (0 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_565 (1 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_556 (2 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_1555 (3 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_5551 (4 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_WP (1<<17)
+ #define LCD_CONTROL_WD (1<<16)
+ #define LCD_CONTROL_C (1<<15)
+ #define LCD_CONTROL_SM_BIT 13
+ #define LCD_CONTROL_SM_MASK (0x3 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_0 (0 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_90 (1 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_180 (2 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_270 (3 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_DB (1<<12)
+ #define LCD_CONTROL_CCO (1<<11)
+ #define LCD_CONTROL_DP (1<<10)
+ #define LCD_CONTROL_PO_BIT 8
+ #define LCD_CONTROL_PO_MASK (0x3 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_00 (0 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_01 (1 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_10 (2 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_11 (3 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_MPI (1<<7)
+ #define LCD_CONTROL_PT (1<<6)
+ #define LCD_CONTROL_PC (1<<5)
+ #define LCD_CONTROL_BPP_BIT 1
+ #define LCD_CONTROL_BPP_MASK (0x7 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_1 (0 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_2 (1 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_4 (2 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_8 (3 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_12 (4 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_16 (5 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_GO (1<<0)
+
+#define LCD_INTSTATUS (AU1100_LCD_BASE + 0x4)
+#define LCD_INTENABLE (AU1100_LCD_BASE + 0x8)
+ #define LCD_INT_SD (1<<7)
+ #define LCD_INT_OF (1<<6)
+ #define LCD_INT_UF (1<<5)
+ #define LCD_INT_SA (1<<3)
+ #define LCD_INT_SS (1<<2)
+ #define LCD_INT_S1 (1<<1)
+ #define LCD_INT_S0 (1<<0)
+
+#define LCD_HORZTIMING (AU1100_LCD_BASE + 0xC)
+ #define LCD_HORZTIMING_HN2_BIT 24
+ #define LCD_HORZTIMING_HN2_MASK (0xFF << LCD_HORZTIMING_HN2_BIT)
+ #define LCD_HORZTIMING_HN2_N(N) ((((N)-1) << LCD_HORZTIMING_HN2_BIT) & LCD_HORZTIMING_HN2_MASK)
+ #define LCD_HORZTIMING_HN1_BIT 16
+ #define LCD_HORZTIMING_HN1_MASK (0xFF << LCD_HORZTIMING_HN1_BIT)
+ #define LCD_HORZTIMING_HN1_N(N) ((((N)-1) << LCD_HORZTIMING_HN1_BIT) & LCD_HORZTIMING_HN1_MASK)
+ #define LCD_HORZTIMING_HPW_BIT 10
+ #define LCD_HORZTIMING_HPW_MASK (0x3F << LCD_HORZTIMING_HPW_BIT)
+ #define LCD_HORZTIMING_HPW_N(N) ((((N)-1) << LCD_HORZTIMING_HPW_BIT) & LCD_HORZTIMING_HPW_MASK)
+ #define LCD_HORZTIMING_PPL_BIT 0
+ #define LCD_HORZTIMING_PPL_MASK (0x3FF << LCD_HORZTIMING_PPL_BIT)
+ #define LCD_HORZTIMING_PPL_N(N) ((((N)-1) << LCD_HORZTIMING_PPL_BIT) & LCD_HORZTIMING_PPL_MASK)
+
+#define LCD_VERTTIMING (AU1100_LCD_BASE + 0x10)
+ #define LCD_VERTTIMING_VN2_BIT 24
+ #define LCD_VERTTIMING_VN2_MASK (0xFF << LCD_VERTTIMING_VN2_BIT)
+ #define LCD_VERTTIMING_VN2_N(N) ((((N)-1) << LCD_VERTTIMING_VN2_BIT) & LCD_VERTTIMING_VN2_MASK)
+ #define LCD_VERTTIMING_VN1_BIT 16
+ #define LCD_VERTTIMING_VN1_MASK (0xFF << LCD_VERTTIMING_VN1_BIT)
+ #define LCD_VERTTIMING_VN1_N(N) ((((N)-1) << LCD_VERTTIMING_VN1_BIT) & LCD_VERTTIMING_VN1_MASK)
+ #define LCD_VERTTIMING_VPW_BIT 10
+ #define LCD_VERTTIMING_VPW_MASK (0x3F << LCD_VERTTIMING_VPW_BIT)
+ #define LCD_VERTTIMING_VPW_N(N) ((((N)-1) << LCD_VERTTIMING_VPW_BIT) & LCD_VERTTIMING_VPW_MASK)
+ #define LCD_VERTTIMING_LPP_BIT 0
+ #define LCD_VERTTIMING_LPP_MASK (0x3FF << LCD_VERTTIMING_LPP_BIT)
+ #define LCD_VERTTIMING_LPP_N(N) ((((N)-1) << LCD_VERTTIMING_LPP_BIT) & LCD_VERTTIMING_LPP_MASK)
+
+#define LCD_CLKCONTROL (AU1100_LCD_BASE + 0x14)
+ #define LCD_CLKCONTROL_IB (1<<18)
+ #define LCD_CLKCONTROL_IC (1<<17)
+ #define LCD_CLKCONTROL_IH (1<<16)
+ #define LCD_CLKCONTROL_IV (1<<15)
+ #define LCD_CLKCONTROL_BF_BIT 10
+ #define LCD_CLKCONTROL_BF_MASK (0x1F << LCD_CLKCONTROL_BF_BIT)
+ #define LCD_CLKCONTROL_BF_N(N) ((((N)-1) << LCD_CLKCONTROL_BF_BIT) & LCD_CLKCONTROL_BF_MASK)
+ #define LCD_CLKCONTROL_PCD_BIT 0
+ #define LCD_CLKCONTROL_PCD_MASK (0x3FF << LCD_CLKCONTROL_PCD_BIT)
+ #define LCD_CLKCONTROL_PCD_N(N) (((N) << LCD_CLKCONTROL_PCD_BIT) & LCD_CLKCONTROL_PCD_MASK)
+
+#define LCD_DMAADDR0 (AU1100_LCD_BASE + 0x18)
+#define LCD_DMAADDR1 (AU1100_LCD_BASE + 0x1C)
+ #define LCD_DMA_SA_BIT 5
+ #define LCD_DMA_SA_MASK (0x7FFFFFF << LCD_DMA_SA_BIT)
+ #define LCD_DMA_SA_N(N) ((N) & LCD_DMA_SA_MASK)
+
+#define LCD_WORDS (AU1100_LCD_BASE + 0x20)
+ #define LCD_WRD_WRDS_BIT 0
+ #define LCD_WRD_WRDS_MASK (0xFFFFFFFF << LCD_WRD_WRDS_BIT)
+ #define LCD_WRD_WRDS_N(N) ((((N)-1) << LCD_WRD_WRDS_BIT) & LCD_WRD_WRDS_MASK)
+
+#define LCD_PWMDIV (AU1100_LCD_BASE + 0x24)
+ #define LCD_PWMDIV_EN (1<<12)
+ #define LCD_PWMDIV_PWMDIV_BIT 0
+ #define LCD_PWMDIV_PWMDIV_MASK (0xFFF << LCD_PWMDIV_PWMDIV_BIT)
+ #define LCD_PWMDIV_PWMDIV_N(N) ((((N)-1) << LCD_PWMDIV_PWMDIV_BIT) & LCD_PWMDIV_PWMDIV_MASK)
+
+#define LCD_PWMHI (AU1100_LCD_BASE + 0x28)
+ #define LCD_PWMHI_PWMHI1_BIT 12
+ #define LCD_PWMHI_PWMHI1_MASK (0xFFF << LCD_PWMHI_PWMHI1_BIT)
+ #define LCD_PWMHI_PWMHI1_N(N) (((N) << LCD_PWMHI_PWMHI1_BIT) & LCD_PWMHI_PWMHI1_MASK)
+ #define LCD_PWMHI_PWMHI0_BIT 0
+ #define LCD_PWMHI_PWMHI0_MASK (0xFFF << LCD_PWMHI_PWMHI0_BIT)
+ #define LCD_PWMHI_PWMHI0_N(N) (((N) << LCD_PWMHI_PWMHI0_BIT) & LCD_PWMHI_PWMHI0_MASK)
+
+#define LCD_PALLETTEBASE (AU1100_LCD_BASE + 0x400)
+ #define LCD_PALLETTE_MONO_MI_BIT 0
+ #define LCD_PALLETTE_MONO_MI_MASK (0xF << LCD_PALLETTE_MONO_MI_BIT)
+ #define LCD_PALLETTE_MONO_MI_N(N) (((N)<< LCD_PALLETTE_MONO_MI_BIT) & LCD_PALLETTE_MONO_MI_MASK)
+
+ #define LCD_PALLETTE_COLOR_RI_BIT 8
+ #define LCD_PALLETTE_COLOR_RI_MASK (0xF << LCD_PALLETTE_COLOR_RI_BIT)
+ #define LCD_PALLETTE_COLOR_RI_N(N) (((N)<< LCD_PALLETTE_COLOR_RI_BIT) & LCD_PALLETTE_COLOR_RI_MASK)
+ #define LCD_PALLETTE_COLOR_GI_BIT 4
+ #define LCD_PALLETTE_COLOR_GI_MASK (0xF << LCD_PALLETTE_COLOR_GI_BIT)
+ #define LCD_PALLETTE_COLOR_GI_N(N) (((N)<< LCD_PALLETTE_COLOR_GI_BIT) & LCD_PALLETTE_COLOR_GI_MASK)
+ #define LCD_PALLETTE_COLOR_BI_BIT 0
+ #define LCD_PALLETTE_COLOR_BI_MASK (0xF << LCD_PALLETTE_COLOR_BI_BIT)
+ #define LCD_PALLETTE_COLOR_BI_N(N) (((N)<< LCD_PALLETTE_COLOR_BI_BIT) & LCD_PALLETTE_COLOR_BI_MASK)
+
+ #define LCD_PALLETTE_TFT_DC_BIT 0
+ #define LCD_PALLETTE_TFT_DC_MASK (0xFFFF << LCD_PALLETTE_TFT_DC_BIT)
+ #define LCD_PALLETTE_TFT_DC_N(N) (((N)<< LCD_PALLETTE_TFT_DC_BIT) & LCD_PALLETTE_TFT_DC_MASK)
+
+/********************************************************************/
+
+/* List of panels known to work with the AU1100 LCD controller.
+ * To add a new panel, enter the same specifications as the
+ * Generic_TFT one, and MAKE SURE that it doesn't conflicts
+ * with the controller restrictions. Restrictions are:
+ *
+ * STN color panels: max_bpp <= 12
+ * STN mono panels: max_bpp <= 4
+ * TFT panels: max_bpp <= 16
+ * max_xres <= 800
+ * max_yres <= 600
+ */
+static struct au1100fb_panel known_lcd_panels[] =
+{
+ /* 800x600x16bpp CRT */
+ [0] = {
+ .name = "CRT_800x600_16",
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .control_base = 0x0004886A |
+ LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_DEFAULT_SBPPF |
+ LCD_CONTROL_BPP_16,
+ .clkcontrol_base = 0x00020000,
+ .horztiming = 0x005aff1f,
+ .verttiming = 0x16000e57,
+ },
+ /* just the standard LCD */
+ [1] = {
+ .name = "WWPC LCD",
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .control_base = 0x0006806A,
+ .horztiming = 0x0A1010EF,
+ .verttiming = 0x0301013F,
+ .clkcontrol_base = 0x00018001,
+ },
+ /* Sharp 320x240 TFT panel */
+ [2] = {
+ .name = "Sharp_LQ038Q5DR01",
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .control_base =
( LCD_CONTROL_SBPPF_565
- /*LCD_CONTROL_WP*/
- /*LCD_CONTROL_WD*/
| LCD_CONTROL_C
| LCD_CONTROL_SM_0
- /*LCD_CONTROL_DB*/
- /*LCD_CONTROL_CCO*/
- /*LCD_CONTROL_DP*/
- | LCD_DEFAULT_PIX_FORMAT
- /*LCD_CONTROL_MPI*/
+ | LCD_CONTROL_DEFAULT_PO
| LCD_CONTROL_PT
| LCD_CONTROL_PC
| LCD_CONTROL_BPP_16 ),
-
- /* mode_horztiming */
+ .horztiming =
( LCD_HORZTIMING_HN2_N(8)
| LCD_HORZTIMING_HN1_N(60)
| LCD_HORZTIMING_HPW_N(12)
| LCD_HORZTIMING_PPL_N(320) ),
-
- /* mode_verttiming */
+ .verttiming =
( LCD_VERTTIMING_VN2_N(5)
| LCD_VERTTIMING_VN1_N(17)
| LCD_VERTTIMING_VPW_N(1)
| LCD_VERTTIMING_LPP_N(240) ),
-
- /* mode_clkcontrol */
- ( 0
- /*LCD_CLKCONTROL_IB*/
- /*LCD_CLKCONTROL_IC*/
- /*LCD_CLKCONTROL_IH*/
- /*LCD_CLKCONTROL_IV*/
- | LCD_CLKCONTROL_PCD_N(1) ),
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (1<<5)),
-
- /* mode_backlight */
- 6
+ .clkcontrol_base = LCD_CLKCONTROL_PCD_N(1),
},
- { /* 1: Pb1100 LCDC 640x480 TFT panel */
- 640, /* xres */
- 480, /* yres */
- 16, /* bpp */
-
- "Generic_640x480_16",
-
- /* mode_control */
- 0x004806a | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x3434d67f,
-
- /* mode_verttiming */
- 0x0e0e39df,
-
- /* mode_clkcontrol */
- ( 0
- /*LCD_CLKCONTROL_IB*/
- /*LCD_CLKCONTROL_IC*/
- /*LCD_CLKCONTROL_IH*/
- /*LCD_CLKCONTROL_IV*/
- | LCD_CLKCONTROL_PCD_N(1) ),
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
+ /* Hitachi SP14Q005 and possibly others */
+ [3] = {
+ .name = "Hitachi_SP14Qxxx",
+ .xres = 320,
+ .yres = 240,
+ .bpp = 4,
+ .control_base =
+ ( LCD_CONTROL_C
+ | LCD_CONTROL_BPP_4 ),
+ .horztiming =
+ ( LCD_HORZTIMING_HN2_N(1)
+ | LCD_HORZTIMING_HN1_N(1)
+ | LCD_HORZTIMING_HPW_N(1)
+ | LCD_HORZTIMING_PPL_N(320) ),
+ .verttiming =
+ ( LCD_VERTTIMING_VN2_N(1)
+ | LCD_VERTTIMING_VN1_N(1)
+ | LCD_VERTTIMING_VPW_N(1)
+ | LCD_VERTTIMING_LPP_N(240) ),
+ .clkcontrol_base = LCD_CLKCONTROL_PCD_N(4),
},
- { /* 2: Pb1100 LCDB 640x480 PrimeView TFT panel */
- 640, /* xres */
- 480, /* yres */
- 16, /* bpp */
-
- "PrimeView_640x480_16",
-
- /* mode_control */
- 0x0004886a | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x0e4bfe7f,
-
- /* mode_verttiming */
- 0x210805df,
-
- /* mode_clkcontrol */
- 0x00038001,
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
+ /* Generic 640x480 TFT panel */
+ [4] = {
+ .name = "TFT_640x480_16",
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .control_base = 0x004806a | LCD_CONTROL_DEFAULT_PO,
+ .horztiming = 0x3434d67f,
+ .verttiming = 0x0e0e39df,
+ .clkcontrol_base = LCD_CLKCONTROL_PCD_N(1),
},
- { /* 3: Pb1100 800x600x16bpp NEON CRT */
- 800, /* xres */
- 600, /* yres */
- 16, /* bpp */
-
- "NEON_800x600_16",
-
- /* mode_control */
- 0x0004886A | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x005AFF1F,
-
- /* mode_verttiming */
- 0x16000E57,
-
- /* mode_clkcontrol */
- 0x00020000,
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
- },
-
- { /* 4: Pb1100 640x480x16bpp NEON CRT */
- 640, /* xres */
- 480, /* yres */
- 16, /* bpp */
-
- "NEON_640x480_16",
-
- /* mode_control */
- 0x0004886A | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x0052E27F,
-
- /* mode_verttiming */
- 0x18000DDF,
-
- /* mode_clkcontrol */
- 0x00020000,
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
+ /* Pb1100 LCDB 640x480 PrimeView TFT panel */
+ [5] = {
+ .name = "PrimeView_640x480_16",
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .control_base = 0x0004886a | LCD_CONTROL_DEFAULT_PO,
+ .horztiming = 0x0e4bfe7f,
+ .verttiming = 0x210805df,
+ .clkcontrol_base = 0x00038001,
},
};
+
+struct au1100fb_drv_info {
+ int panel_idx;
+ char *opt_mode;
+};
+
+/********************************************************************/
+
+/* Inline helpers */
+
+#define panel_is_dual(panel) (panel->control_base & LCD_CONTROL_DP)
+#define panel_is_active(panel)(panel->control_base & LCD_CONTROL_PT)
+#define panel_is_color(panel) (panel->control_base & LCD_CONTROL_PC)
+#define panel_swap_rgb(panel) (panel->control_base & LCD_CONTROL_CCO)
+
#endif /* _AU1100LCD_H */
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index e793ffd..762c7a5 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -32,7 +32,6 @@
#include <linux/font.h>
-extern struct font_desc font_vga_8x16;
extern unsigned long sgi_gfxaddr;
#define FONT_DATA ((unsigned char *)font_vga_8x16.data)
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index d3c1922..485604c 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1126,7 +1126,7 @@
gbefb_setup(options);
#endif
- if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
+ if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
ret = -EBUSY;
goto out_release_framebuffer;
@@ -1152,12 +1152,24 @@
if (gbe_mem_phys) {
/* memory was allocated at boot time */
gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size);
+ if (!gbe_mem) {
+ printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
+ ret = -ENOMEM;
+ goto out_tiles_free;
+ }
+
gbe_dma_addr = 0;
} else {
/* try to allocate memory with the classical allocator
* this has high chance to fail on low memory machines */
gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr,
GFP_KERNEL);
+ if (!gbe_mem) {
+ printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n");
+ ret = -ENOMEM;
+ goto out_tiles_free;
+ }
+
gbe_mem_phys = (unsigned long) gbe_dma_addr;
}
@@ -1165,12 +1177,6 @@
mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1);
#endif
- if (!gbe_mem) {
- printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
- ret = -ENXIO;
- goto out_tiles_free;
- }
-
/* map framebuffer memory into tiles table */
for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++)
gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i;
diff --git a/include/asm-mips/abi.h b/include/asm-mips/abi.h
new file mode 100644
index 0000000..2e7e651
--- /dev/null
+++ b/include/asm-mips/abi.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 by Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_ABI_H
+#define _ASM_ABI_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+struct mips_abi {
+ int (* const do_signal)(sigset_t *oldset, struct pt_regs *regs);
+ int (* const setup_frame)(struct k_sigaction * ka,
+ struct pt_regs *regs, int signr,
+ sigset_t *set);
+ int (* const setup_rt_frame)(struct k_sigaction * ka,
+ struct pt_regs *regs, int signr,
+ sigset_t *set, siginfo_t *info);
+};
+
+#endif /* _ASM_ABI_H */
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index 7dc2619..42520cc 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -20,10 +20,12 @@
#define _ATYPE_
#define _ATYPE32_
#define _ATYPE64_
+#define _LLCONST_(x) x
#else
#define _ATYPE_ __PTRDIFF_TYPE__
#define _ATYPE32_ int
#define _ATYPE64_ long long
+#define _LLCONST_(x) x ## LL
#endif
/*
@@ -45,8 +47,9 @@
/*
* Returns the physical address of a CKSEGx / XKPHYS address
*/
-#define CPHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
-#define XPHYSADDR(a) ((_ACAST64_ (a)) & 0x000000ffffffffff)
+#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
+#define XPHYSADDR(a) ((_ACAST64_(a)) & \
+ _LLCONST_(0x000000ffffffffff))
#ifdef CONFIG_64BIT
@@ -55,14 +58,14 @@
* The compatibility segments use the full 64-bit sign extended value. Note
* the R8000 doesn't have them so don't reference these in generic MIPS code.
*/
-#define XKUSEG 0x0000000000000000
-#define XKSSEG 0x4000000000000000
-#define XKPHYS 0x8000000000000000
-#define XKSEG 0xc000000000000000
-#define CKSEG0 0xffffffff80000000
-#define CKSEG1 0xffffffffa0000000
-#define CKSSEG 0xffffffffc0000000
-#define CKSEG3 0xffffffffe0000000
+#define XKUSEG _LLCONST_(0x0000000000000000)
+#define XKSSEG _LLCONST_(0x4000000000000000)
+#define XKPHYS _LLCONST_(0x8000000000000000)
+#define XKSEG _LLCONST_(0xc000000000000000)
+#define CKSEG0 _LLCONST_(0xffffffff80000000)
+#define CKSEG1 _LLCONST_(0xffffffffa0000000)
+#define CKSSEG _LLCONST_(0xffffffffc0000000)
+#define CKSEG3 _LLCONST_(0xffffffffe0000000)
#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0)
#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1)
@@ -120,7 +123,8 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED,(p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE,(p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm,a) (0x8000000000000000 | ((cm)<<59) | (a))
+#define PHYS_TO_XKPHYS(cm,a) (_LLCONST_(0x8000000000000000) | \
+ ((cm)<<59) | (a))
#if defined (CONFIG_CPU_R4300) \
|| defined (CONFIG_CPU_R4X00) \
@@ -128,46 +132,56 @@
|| defined (CONFIG_CPU_NEVADA) \
|| defined (CONFIG_CPU_TX49XX) \
|| defined (CONFIG_CPU_MIPS64)
-#define KUSIZE 0x0000010000000000 /* 2^^40 */
-#define KUSIZE_64 0x0000010000000000 /* 2^^40 */
-#define K0SIZE 0x0000001000000000 /* 2^^36 */
-#define K1SIZE 0x0000001000000000 /* 2^^36 */
-#define K2SIZE 0x000000ff80000000
-#define KSEGSIZE 0x000000ff80000000 /* max syssegsz */
-#define TO_PHYS_MASK 0x0000000fffffffff /* 2^^36 - 1 */
+#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K0SIZE _LLCONST_(0x0000001000000000) /* 2^^36 */
+#define K1SIZE _LLCONST_(0x0000001000000000) /* 2^^36 */
+#define K2SIZE _LLCONST_(0x000000ff80000000)
+#define KSEGSIZE _LLCONST_(0x000000ff80000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x0000000fffffffff) /* 2^^36 - 1 */
#endif
#if defined (CONFIG_CPU_R8000)
/* We keep KUSIZE consistent with R4000 for now (2^^40) instead of (2^^48) */
-#define KUSIZE 0x0000010000000000 /* 2^^40 */
-#define KUSIZE_64 0x0000010000000000 /* 2^^40 */
-#define K0SIZE 0x0000010000000000 /* 2^^40 */
-#define K1SIZE 0x0000010000000000 /* 2^^40 */
-#define K2SIZE 0x0001000000000000
-#define KSEGSIZE 0x0000010000000000 /* max syssegsz */
-#define TO_PHYS_MASK 0x000000ffffffffff /* 2^^40 - 1 */
+#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K0SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K1SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K2SIZE _LLCONST_(0x0001000000000000)
+#define KSEGSIZE _LLCONST_(0x0000010000000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */
#endif
#if defined (CONFIG_CPU_R10000)
-#define KUSIZE 0x0000010000000000 /* 2^^40 */
-#define KUSIZE_64 0x0000010000000000 /* 2^^40 */
-#define K0SIZE 0x0000010000000000 /* 2^^40 */
-#define K1SIZE 0x0000010000000000 /* 2^^40 */
-#define K2SIZE 0x00000fff80000000
-#define KSEGSIZE 0x00000fff80000000 /* max syssegsz */
-#define TO_PHYS_MASK 0x000000ffffffffff /* 2^^40 - 1 */
+#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K0SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K1SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K2SIZE _LLCONST_(0x00000fff80000000)
+#define KSEGSIZE _LLCONST_(0x00000fff80000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */
+#endif
+
+#if defined(CONFIG_CPU_SB1) || defined(CONFIG_CPU_SB1A)
+#define KUSIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define KUSIZE_64 _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define K0SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define K1SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define K2SIZE _LLCONST_(0x0000ffff80000000)
+#define KSEGSIZE _LLCONST_(0x0000ffff80000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x00000fffffffffff) /* 2^^44 - 1 */
#endif
/*
* Further names for SGI source compatibility. These are stolen from
* IRIX's <sys/mips_addrspace.h>.
*/
-#define KUBASE 0
-#define KUSIZE_32 0x0000000080000000 /* KUSIZE
+#define KUBASE _LLCONST_(0)
+#define KUSIZE_32 _LLCONST_(0x0000000080000000) /* KUSIZE
for a 32 bit proc */
-#define K0BASE_EXL_WR 0xa800000000000000 /* exclusive on write */
-#define K0BASE_NONCOH 0x9800000000000000 /* noncoherent */
-#define K0BASE_EXL 0xa000000000000000 /* exclusive */
+#define K0BASE_EXL_WR _LLCONST_(0xa800000000000000) /* exclusive on write */
+#define K0BASE_NONCOH _LLCONST_(0x9800000000000000) /* noncoherent */
+#define K0BASE_EXL _LLCONST_(0xa000000000000000) /* exclusive */
#ifndef CONFIG_CPU_R8000
@@ -176,7 +190,7 @@
* in order to catch bugs in the source code.
*/
-#define COMPAT_K1BASE32 0xffffffffa0000000
+#define COMPAT_K1BASE32 _LLCONST_(0xffffffffa0000000)
#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */
#endif
diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h
index f532377..4b090f3 100644
--- a/include/asm-mips/asm.h
+++ b/include/asm-mips/asm.h
@@ -107,6 +107,7 @@
/*
* Print formatted string
*/
+#ifdef CONFIG_PRINTK
#define PRINT(string) \
.set push; \
.set reorder; \
@@ -114,6 +115,9 @@
jal printk; \
.set pop; \
TEXT(string)
+#else
+#define PRINT(string)
+#endif
#define TEXT(msg) \
.pushsection .data; \
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index c0bd8d0..6202eb8 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -62,20 +62,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_add \n"
" addu %0, %2 \n"
" sc %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_add \n"
" addu %0, %2 \n"
" sc %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -100,20 +104,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_sub \n"
" subu %0, %2 \n"
" sc %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_sub \n"
" subu %0, %2 \n"
" sc %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -136,12 +144,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_add_return \n"
" addu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqzl %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -149,12 +159,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_add_return \n"
" addu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqz %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -179,12 +191,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_return \n"
" subu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqzl %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -192,12 +206,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_return \n"
" subu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqz %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -229,6 +245,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_if_positive\n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -236,6 +253,7 @@
" beqzl %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -243,6 +261,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_if_positive\n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -250,6 +269,7 @@
" beqz %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -367,20 +387,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
" addu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
" addu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -405,20 +429,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
" subu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
" subu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -441,12 +469,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
" addu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -454,12 +484,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
" addu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -484,12 +516,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
" subu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -497,12 +531,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
" subu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -534,6 +570,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_if_positive\n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -541,6 +578,7 @@
" beqzl %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -548,6 +586,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_if_positive\n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -555,6 +594,7 @@
" beqz %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index eb8d79d..5496f90 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -12,20 +12,21 @@
#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/types.h>
+#include <asm/bug.h>
#include <asm/byteorder.h> /* sigh ... */
#include <asm/cpu-features.h>
#if (_MIPS_SZLONG == 32)
#define SZLONG_LOG 5
#define SZLONG_MASK 31UL
-#define __LL "ll "
-#define __SC "sc "
+#define __LL "ll "
+#define __SC "sc "
#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x))
#elif (_MIPS_SZLONG == 64)
#define SZLONG_LOG 6
#define SZLONG_MASK 63UL
-#define __LL "lld "
-#define __SC "scd "
+#define __LL "lld "
+#define __SC "scd "
#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x))
#endif
@@ -72,18 +73,22 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # set_bit \n"
" or %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # set_bit \n"
" or %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else {
@@ -132,18 +137,22 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # clear_bit \n"
" and %0, %2 \n"
" " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m));
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # clear_bit \n"
" and %0, %2 \n"
" " __SC "%0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m));
} else {
@@ -191,10 +200,12 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # change_bit \n"
" xor %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else if (cpu_has_llsc) {
@@ -202,10 +213,12 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # change_bit \n"
" xor %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else {
@@ -253,14 +266,16 @@
unsigned long temp, res;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # test_and_set_bit \n"
" or %2, %0, %3 \n"
" " __SC "%2, %1 \n"
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
- "sync \n"
+ " sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -271,16 +286,18 @@
unsigned long temp, res;
__asm__ __volatile__(
- " .set noreorder # test_and_set_bit \n"
- "1: " __LL "%0, %1 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_set_bit \n"
" or %2, %0, %3 \n"
" " __SC "%2, %1 \n"
" beqz %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
- "sync \n"
+ " sync \n"
#endif
- ".set\treorder"
+ " .set pop \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -343,15 +360,17 @@
unsigned long temp, res;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # test_and_clear_bit \n"
" or %2, %0, %3 \n"
" xor %2, %3 \n"
- __SC "%2, %1 \n"
+ " " __SC "%2, %1 \n"
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -362,17 +381,19 @@
unsigned long temp, res;
__asm__ __volatile__(
- " .set noreorder # test_and_clear_bit \n"
- "1: " __LL "%0, %1 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_clear_bit \n"
" or %2, %0, %3 \n"
" xor %2, %3 \n"
- __SC "%2, %1 \n"
+ " " __SC "%2, %1 \n"
" beqz %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
- " .set reorder \n"
+ " .set pop \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -435,14 +456,16 @@
unsigned long temp, res;
__asm__ __volatile__(
- "1: " __LL " %0, %1 # test_and_change_bit \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_change_bit \n"
" xor %2, %0, %3 \n"
- " "__SC "%2, %1 \n"
+ " " __SC "%2, %1 \n"
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -453,16 +476,18 @@
unsigned long temp, res;
__asm__ __volatile__(
- " .set noreorder # test_and_change_bit \n"
- "1: " __LL " %0, %1 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_change_bit \n"
" xor %2, %0, %3 \n"
- " "__SC "\t%2, %1 \n"
+ " " __SC "\t%2, %1 \n"
" beqz %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
- " .set reorder \n"
+ " .set pop \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -523,22 +548,60 @@
}
/*
- * ffz - find first zero in word.
+ * Return the bit position (0..63) of the most significant 1 bit in a word
+ * Returns -1 if no 1 bit exists
+ */
+static inline int __ilog2(unsigned long x)
+{
+ int lz;
+
+ if (sizeof(x) == 4) {
+ __asm__ (
+ " .set push \n"
+ " .set mips32 \n"
+ " clz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return 31 - lz;
+ }
+
+ BUG_ON(sizeof(x) != 8);
+
+ __asm__ (
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return 63 - lz;
+}
+
+/*
+ * __ffs - find first bit in word.
* @word: The word to search
*
- * Undefined if no zero exists, so code should check against ~0UL first.
+ * Returns 0..SZLONG-1
+ * Undefined if no bit exists, so code should check against 0 first.
*/
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ return __ilog2(word & -word);
+#else
int b = 0, s;
- word = ~word;
#ifdef CONFIG_32BIT
s = 16; if (word << 16 != 0) s = 0; b += s; word >>= s;
s = 8; if (word << 24 != 0) s = 0; b += s; word >>= s;
s = 4; if (word << 28 != 0) s = 0; b += s; word >>= s;
s = 2; if (word << 30 != 0) s = 0; b += s; word >>= s;
s = 1; if (word << 31 != 0) s = 0; b += s;
+
+ return b;
#endif
#ifdef CONFIG_64BIT
s = 32; if (word << 32 != 0) s = 0; b += s; word >>= s;
@@ -547,27 +610,92 @@
s = 4; if (word << 60 != 0) s = 0; b += s; word >>= s;
s = 2; if (word << 62 != 0) s = 0; b += s; word >>= s;
s = 1; if (word << 63 != 0) s = 0; b += s;
-#endif
return b;
+#endif
+#endif
}
/*
- * __ffs - find first bit in word.
+ * ffs - find first bit set.
* @word: The word to search
*
- * Undefined if no bit exists, so code should check against 0 first.
+ * Returns 1..SZLONG
+ * Returns 0 if no bit exists
*/
-static inline unsigned long __ffs(unsigned long word)
+
+static inline unsigned long ffs(unsigned long word)
{
- return ffz(~word);
+ if (!word)
+ return 0;
+
+ return __ffs(word) + 1;
}
/*
- * fls: find last bit set.
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
*/
+static inline unsigned long ffz(unsigned long word)
+{
+ return __ffs (~word);
+}
-#define fls(x) generic_fls(x)
+/*
+ * flz - find last zero in word.
+ * @word: The word to search
+ *
+ * Returns 0..SZLONG-1
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long flz(unsigned long word)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ return __ilog2(~word);
+#else
+#ifdef CONFIG_32BIT
+ int r = 31, s;
+ word = ~word;
+ s = 16; if ((word & 0xffff0000)) s = 0; r -= s; word <<= s;
+ s = 8; if ((word & 0xff000000)) s = 0; r -= s; word <<= s;
+ s = 4; if ((word & 0xf0000000)) s = 0; r -= s; word <<= s;
+ s = 2; if ((word & 0xc0000000)) s = 0; r -= s; word <<= s;
+ s = 1; if ((word & 0x80000000)) s = 0; r -= s;
+
+ return r;
+#endif
+#ifdef CONFIG_64BIT
+ int r = 63, s;
+ word = ~word;
+ s = 32; if ((word & 0xffffffff00000000UL)) s = 0; r -= s; word <<= s;
+ s = 16; if ((word & 0xffff000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 8; if ((word & 0xff00000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 4; if ((word & 0xf000000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 2; if ((word & 0xc000000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 1; if ((word & 0x8000000000000000UL)) s = 0; r -= s;
+
+ return r;
+#endif
+#endif
+}
+
+/*
+ * fls - find last bit set.
+ * @word: The word to search
+ *
+ * Returns 1..SZLONG
+ * Returns 0 if no bit exists
+ */
+static inline unsigned long fls(unsigned long word)
+{
+ if (word == 0)
+ return 0;
+
+ return flz(~word) + 1;
+}
+
/*
* find_next_zero_bit - find the first zero bit in a memory region
@@ -704,17 +832,6 @@
}
/*
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-
-#define ffs(x) generic_ffs(x)
-
-/*
* hweightN - returns the hamming weight of a N-bit word
* @x: the word to weigh
*
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index b1e57d7..14fc88f 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -77,6 +77,7 @@
#define MACH_SGI_IP27 1 /* Origin 200, Origin 2000, Onyx 2 */
#define MACH_SGI_IP28 2 /* Indigo2 Impact */
#define MACH_SGI_IP32 3 /* O2 */
+#define MACH_SGI_IP30 4 /* Octane, Octane2 */
/*
* Valid machtype for group COBALT
@@ -136,6 +137,7 @@
#define MACH_GROUP_PHILIPS 14
#define MACH_PHILIPS_NINO 0 /* Nino */
#define MACH_PHILIPS_VELO 1 /* Velo */
+#define MACH_PHILIPS_JBS 2 /* JBS */
/*
* Valid machtype for group Globespan
@@ -159,6 +161,7 @@
#define MACH_TOSHIBA_JMR3927 3 /* JMR-TX3927 CPU/IO board */
#define MACH_TOSHIBA_RBTX4927 4
#define MACH_TOSHIBA_RBTX4937 5
+#define MACH_TOSHIBA_RBTX4938 6
#define GROUP_TOSHIBA_NAMES { "Pallas", "TopasCE", "JMR", "JMR TX3927", \
"RBTX4927", "RBTX4937" }
@@ -177,6 +180,8 @@
#define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */
#define MACH_PB1550 8 /* Au1550-based eval board */
#define MACH_DB1550 9 /* Au1550-based eval board */
+#define MACH_PB1200 10 /* Au1200-based eval board */
+#define MACH_DB1200 11 /* Au1200-based eval board */
/*
* Valid machtype for group NEC_VR41XX
diff --git a/include/asm-mips/break.h b/include/asm-mips/break.h
index 2e6de78..25b980c 100644
--- a/include/asm-mips/break.h
+++ b/include/asm-mips/break.h
@@ -28,6 +28,7 @@
#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
#define BRK_BUG 512 /* Used by BUG() */
+#define BRK_KDB 513 /* Used in KDB_ENTER() */
#define BRK_MULOVF 1023 /* Multiply overflow */
#endif /* __ASM_BREAK_H */
diff --git a/include/asm-mips/bug.h b/include/asm-mips/bug.h
index 3f594b4..87d49a5 100644
--- a/include/asm-mips/bug.h
+++ b/include/asm-mips/bug.h
@@ -1,16 +1,21 @@
#ifndef __ASM_BUG_H
#define __ASM_BUG_H
-#include <asm/break.h>
+#include <linux/config.h>
#ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
+
+#include <asm/break.h>
+
#define BUG() \
do { \
__asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
} while (0)
+
+#define HAVE_ARCH_BUG
+
#endif
#include <asm-generic/bug.h>
-#endif
+#endif /* __ASM_BUG_H */
diff --git a/include/asm-mips/bugs.h b/include/asm-mips/bugs.h
index b14b961..cb2ea7c 100644
--- a/include/asm-mips/bugs.h
+++ b/include/asm-mips/bugs.h
@@ -8,12 +8,18 @@
#define _ASM_BUGS_H
#include <linux/config.h>
+#include <linux/delay.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
extern void check_bugs32(void);
extern void check_bugs64(void);
static inline void check_bugs(void)
{
+ unsigned int cpu = smp_processor_id();
+
+ cpu_data[cpu].udelay_val = loops_per_jiffy;
check_bugs32();
#ifdef CONFIG_64BIT
check_bugs64();
diff --git a/include/asm-mips/cache.h b/include/asm-mips/cache.h
index 4517bdf..1a5d1a6 100644
--- a/include/asm-mips/cache.h
+++ b/include/asm-mips/cache.h
@@ -10,6 +10,7 @@
#define _ASM_CACHE_H
#include <linux/config.h>
+#include <kmalloc.h>
#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
@@ -18,6 +19,4 @@
#define SMP_CACHE_SHIFT L1_CACHE_SHIFT
#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define ARCH_KMALLOC_MINALIGN 8
-
#endif /* _ASM_CACHE_H */
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index 635f1bf..a18ba2e 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -49,17 +49,29 @@
extern void (*flush_icache_page)(struct vm_area_struct *vma,
struct page *page);
-extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*flush_icache_range)(unsigned long __user start,
+ unsigned long __user end);
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { \
- memcpy(dst, (void *) src, len); \
- flush_icache_page(vma, page); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+{
+ if (cpu_has_dc_aliases)
+ flush_cache_page(vma, vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+ flush_icache_page(vma, page);
+}
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+{
+ if (cpu_has_dc_aliases)
+ flush_cache_page(vma, vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+}
extern void (*flush_cache_sigtramp)(unsigned long addr);
extern void (*flush_icache_all)(void);
@@ -78,4 +90,7 @@
#define ClearPageDcacheDirty(page) \
clear_bit(PG_dcache_dirty, &(page)->flags)
+/* Run kernel code uncached, useful for cache probing functions. */
+unsigned long __init run_uncached(void *func);
+
#endif /* _ASM_CACHEFLUSH_H */
diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h
index c1ea5a8..b09f897 100644
--- a/include/asm-mips/checksum.h
+++ b/include/asm-mips/checksum.h
@@ -34,8 +34,9 @@
* this is a new version of the above that records errors it finds in *errp,
* but continues and zeros the rest of the buffer.
*/
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, int len,
- unsigned int sum, int *errp);
+unsigned int csum_partial_copy_from_user(const unsigned char __user *src,
+ unsigned char *dst, int len,
+ unsigned int sum, int *errp);
/*
* Copy and checksum to user
@@ -70,14 +71,15 @@
static inline unsigned short int csum_fold(unsigned int sum)
{
__asm__(
- ".set\tnoat\t\t\t# csum_fold\n\t"
- "sll\t$1,%0,16\n\t"
- "addu\t%0,$1\n\t"
- "sltu\t$1,%0,$1\n\t"
- "srl\t%0,%0,16\n\t"
- "addu\t%0,$1\n\t"
- "xori\t%0,0xffff\n\t"
- ".set\tat"
+ " .set push # csum_fold\n"
+ " .set noat \n"
+ " sll $1, %0, 16 \n"
+ " addu %0, $1 \n"
+ " sltu $1, %0, $1 \n"
+ " srl %0, %0, 16 \n"
+ " addu %0, $1 \n"
+ " xori %0, 0xffff \n"
+ " .set pop"
: "=r" (sum)
: "0" (sum));
@@ -127,29 +129,30 @@
unsigned int sum)
{
__asm__(
- ".set\tnoat\t\t\t# csum_tcpudp_nofold\n\t"
+ " .set push # csum_tcpudp_nofold\n"
+ " .set noat \n"
#ifdef CONFIG_32BIT
- "addu\t%0, %2\n\t"
- "sltu\t$1, %0, %2\n\t"
- "addu\t%0, $1\n\t"
+ " addu %0, %2 \n"
+ " sltu $1, %0, %2 \n"
+ " addu %0, $1 \n"
- "addu\t%0, %3\n\t"
- "sltu\t$1, %0, %3\n\t"
- "addu\t%0, $1\n\t"
+ " addu %0, %3 \n"
+ " sltu $1, %0, %3 \n"
+ " addu %0, $1 \n"
- "addu\t%0, %4\n\t"
- "sltu\t$1, %0, %4\n\t"
- "addu\t%0, $1\n\t"
+ " addu %0, %4 \n"
+ " sltu $1, %0, %4 \n"
+ " addu %0, $1 \n"
#endif
#ifdef CONFIG_64BIT
- "daddu\t%0, %2\n\t"
- "daddu\t%0, %3\n\t"
- "daddu\t%0, %4\n\t"
- "dsll32\t$1, %0, 0\n\t"
- "daddu\t%0, $1\n\t"
- "dsrl32\t%0, %0, 0\n\t"
+ " daddu %0, %2 \n"
+ " daddu %0, %3 \n"
+ " daddu %0, %4 \n"
+ " dsll32 $1, %0, 0 \n"
+ " daddu %0, $1 \n"
+ " dsra32 %0, %0, 0 \n"
#endif
- ".set\tat"
+ " .set pop"
: "=r" (sum)
: "0" (daddr), "r"(saddr),
#ifdef __MIPSEL__
@@ -192,57 +195,57 @@
unsigned int sum)
{
__asm__(
- ".set\tpush\t\t\t# csum_ipv6_magic\n\t"
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- "addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t"
- "sltu\t$1, %0, %5\n\t"
- "addu\t%0, $1\n\t"
+ " .set push # csum_ipv6_magic\n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " addu %0, %5 # proto (long in network byte order)\n"
+ " sltu $1, %0, %5 \n"
+ " addu %0, $1 \n"
- "addu\t%0, %6\t\t\t# csum\n\t"
- "sltu\t$1, %0, %6\n\t"
- "lw\t%1, 0(%2)\t\t\t# four words source address\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " addu %0, %6 # csum\n"
+ " sltu $1, %0, %6 \n"
+ " lw %1, 0(%2) # four words source address\n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 4(%2)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 4(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 8(%2)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 8(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 12(%2)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 12(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 0(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 0(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 4(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 4(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 8(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 8(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 12(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 12(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "addu\t%0, $1\t\t\t# Add final carry\n\t"
- ".set\tpop"
+ " addu %0, $1 # Add final carry\n"
+ " .set pop"
: "=r" (sum), "=r" (proto)
: "r" (saddr), "r" (daddr),
"0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/cobalt/cobalt.h
index ca1fbc0..78e1df2 100644
--- a/include/asm-mips/cobalt/cobalt.h
+++ b/include/asm-mips/cobalt/cobalt.h
@@ -19,18 +19,23 @@
* 9 - PCI
* 14 - IDE0
* 15 - IDE1
- *
+ */
+#define COBALT_QUBE_SLOT_IRQ 9
+
+/*
* CPU IRQs are 16 ... 23
*/
-#define COBALT_TIMER_IRQ 18
-#define COBALT_SCC_IRQ 19 /* pre-production has 85C30 */
-#define COBALT_RAQ_SCSI_IRQ 19
-#define COBALT_ETH0_IRQ 19
-#define COBALT_ETH1_IRQ 20
-#define COBALT_SERIAL_IRQ 21
-#define COBALT_SCSI_IRQ 21
-#define COBALT_VIA_IRQ 22 /* Chained to VIA ISA bridge */
-#define COBALT_QUBE_SLOT_IRQ 23
+#define COBALT_CPU_IRQ 16
+
+#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2)
+#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */
+#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3)
+#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3)
+#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4)
+#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4)
+#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5)
+#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5)
+#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */
/*
* PCI configuration space manifest constants. These are wired into
@@ -69,16 +74,21 @@
* Most of this really should go into a separate GT64111 header file.
*/
#define GT64111_IO_BASE 0x10000000UL
+#define GT64111_IO_END 0x11ffffffUL
+#define GT64111_MEM_BASE 0x12000000UL
+#define GT64111_MEM_END 0x13ffffffUL
#define GT64111_BASE 0x14000000UL
-#define GALILEO_REG(ofs) (KSEG0 + GT64111_BASE + (unsigned long)(ofs))
+#define GALILEO_REG(ofs) CKSEG1ADDR(GT64111_BASE + (unsigned long)(ofs))
#define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port))
#define GALILEO_OUTL(val, port) \
do { \
- *(volatile unsigned int *) GALILEO_REG(port) = (port); \
+ *(volatile unsigned int *) GALILEO_REG(port) = (val); \
} while (0)
-#define GALILEO_T0EXP 0x0100
+#define GALILEO_INTR_T0EXP (1 << 8)
+#define GALILEO_INTR_RETRY_CTR (1 << 20)
+
#define GALILEO_ENTC0 0x01
#define GALILEO_SELTC0 0x02
@@ -86,5 +96,21 @@
GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \
(PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS)
+#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
+# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */
+# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */
+# define COBALT_LED_WEB (1 << 2) /* RaQ */
+# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */
+# define COBALT_LED_RESET 0x0f
+
+#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
+# define COBALT_KEY_CLEAR (1 << 1)
+# define COBALT_KEY_LEFT (1 << 2)
+# define COBALT_KEY_UP (1 << 3)
+# define COBALT_KEY_DOWN (1 << 4)
+# define COBALT_KEY_RIGHT (1 << 5)
+# define COBALT_KEY_ENTER (1 << 6)
+# define COBALT_KEY_SELECT (1 << 7)
+# define COBALT_KEY_MASK 0xfe
#endif /* __ASM_COBALT_H */
diff --git a/include/asm-mips/cobalt/mach-gt64120.h b/include/asm-mips/cobalt/mach-gt64120.h
new file mode 100644
index 0000000..587fc43
--- /dev/null
+++ b/include/asm-mips/cobalt/mach-gt64120.h
@@ -0,0 +1 @@
+/* there's something here ... in the dark */
diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h
index 2c084cd..35d2604 100644
--- a/include/asm-mips/compat.h
+++ b/include/asm-mips/compat.h
@@ -15,10 +15,10 @@
typedef s32 compat_suseconds_t;
typedef s32 compat_pid_t;
-typedef u32 __compat_uid_t;
-typedef u32 __compat_gid_t;
-typedef u32 __compat_uid32_t;
-typedef u32 __compat_gid32_t;
+typedef s32 __compat_uid_t;
+typedef s32 __compat_gid_t;
+typedef __compat_uid_t __compat_uid32_t;
+typedef __compat_gid_t __compat_gid32_t;
typedef u32 compat_mode_t;
typedef u32 compat_ino_t;
typedef u32 compat_dev_t;
@@ -54,8 +54,8 @@
compat_ino_t st_ino;
compat_mode_t st_mode;
compat_nlink_t st_nlink;
- __compat_uid32_t st_uid;
- __compat_gid32_t st_gid;
+ __compat_uid_t st_uid;
+ __compat_gid_t st_gid;
compat_dev_t st_rdev;
s32 st_pad2[2];
compat_off_t st_size;
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 9a2de64..03627cfb 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -4,6 +4,7 @@
* for more details.
*
* Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef __ASM_CPU_FEATURES_H
#define __ASM_CPU_FEATURES_H
@@ -24,8 +25,19 @@
#ifndef cpu_has_4kex
#define cpu_has_4kex (cpu_data[0].options & MIPS_CPU_4KEX)
#endif
-#ifndef cpu_has_4ktlb
-#define cpu_has_4ktlb (cpu_data[0].options & MIPS_CPU_4KTLB)
+#ifndef cpu_has_3k_cache
+#define cpu_has_3k_cache (cpu_data[0].options & MIPS_CPU_3K_CACHE)
+#endif
+#define cpu_has_6k_cache 0
+#define cpu_has_8k_cache 0
+#ifndef cpu_has_4k_cache
+#define cpu_has_4k_cache (cpu_data[0].options & MIPS_CPU_4K_CACHE)
+#endif
+#ifndef cpu_has_tx39_cache
+#define cpu_has_tx39_cache (cpu_data[0].options & MIPS_CPU_TX39_CACHE)
+#endif
+#ifndef cpu_has_sb1_cache
+#define cpu_has_sb1_cache (cpu_data[0].options & MIPS_CPU_SB1_CACHE)
#endif
#ifndef cpu_has_fpu
#define cpu_has_fpu (cpu_data[0].options & MIPS_CPU_FPU)
@@ -39,9 +51,6 @@
#ifndef cpu_has_watch
#define cpu_has_watch (cpu_data[0].options & MIPS_CPU_WATCH)
#endif
-#ifndef cpu_has_mips16
-#define cpu_has_mips16 (cpu_data[0].options & MIPS_CPU_MIPS16)
-#endif
#ifndef cpu_has_divec
#define cpu_has_divec (cpu_data[0].options & MIPS_CPU_DIVEC)
#endif
@@ -66,6 +75,18 @@
#ifndef cpu_has_llsc
#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC)
#endif
+#ifndef cpu_has_mips16
+#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16)
+#endif
+#ifndef cpu_has_mdmx
+#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX)
+#endif
+#ifndef cpu_has_mips3d
+#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#endif
+#ifndef cpu_has_smartmips
+#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
+#endif
#ifndef cpu_has_vtag_icache
#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
#endif
@@ -95,15 +116,16 @@
#endif
#endif
-/*
- * Certain CPUs may throw bizarre exceptions if not the whole cacheline
- * contains valid instructions. For these we ensure proper alignment of
- * signal trampolines and pad them to the size of a full cache lines with
- * nops. This is also used in structure definitions so can't be a test macro
- * like the others.
- */
-#ifndef PLAT_TRAMPOLINE_STUFF_LINE
-#define PLAT_TRAMPOLINE_STUFF_LINE 0UL
+#ifndef cpu_has_dsp
+#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
+#endif
+
+#ifdef CONFIG_MIPS_MT
+#ifndef cpu_has_mipsmt
+# define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#endif
+#else
+# define cpu_has_mipsmt 0
#endif
#ifdef CONFIG_32BIT
@@ -142,6 +164,22 @@
# endif
#endif
+#ifdef CONFIG_CPU_MIPSR2
+# if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
+# else
+# define cpu_has_vint 0
+# endif
+# if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
+# else
+# define cpu_has_veic 0
+# endif
+#else
+# define cpu_has_vint 0
+# define cpu_has_veic 0
+#endif
+
#ifndef cpu_has_subset_pcaches
#define cpu_has_subset_pcaches (cpu_data[0].options & MIPS_CPU_SUBSET_CACHES)
#endif
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 20a35b1..d5cf519 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -7,6 +7,7 @@
* Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
* Copyright (C) 1996 Paul M. Antoine
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef __ASM_CPU_INFO_H
#define __ASM_CPU_INFO_H
@@ -61,6 +62,7 @@
* Capability and feature descriptor structure for MIPS CPU
*/
unsigned long options;
+ unsigned long ases;
unsigned int processor_id;
unsigned int fpu_id;
unsigned int cputype;
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index dec060b..48eac296 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -3,6 +3,7 @@
* various MIPS cpu types.
*
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef _ASM_CPU_H
#define _ASM_CPU_H
@@ -22,12 +23,17 @@
spec.
*/
-#define PRID_COMP_LEGACY 0x000000
-#define PRID_COMP_MIPS 0x010000
-#define PRID_COMP_BROADCOM 0x020000
-#define PRID_COMP_ALCHEMY 0x030000
-#define PRID_COMP_SIBYTE 0x040000
-#define PRID_COMP_SANDCRAFT 0x050000
+#define PRID_COMP_LEGACY 0x000000
+#define PRID_COMP_MIPS 0x010000
+#define PRID_COMP_BROADCOM 0x020000
+#define PRID_COMP_ALCHEMY 0x030000
+#define PRID_COMP_SIBYTE 0x040000
+#define PRID_COMP_SANDCRAFT 0x050000
+#define PRID_COMP_PHILIPS 0x060000
+#define PRID_COMP_TOSHIBA 0x070000
+#define PRID_COMP_LSI 0x080000
+#define PRID_COMP_LEXRA 0x0b0000
+
/*
* Assigned values for the product ID register. In order to detect a
@@ -46,6 +52,7 @@
#define PRID_IMP_VR41XX 0x0c00
#define PRID_IMP_R12000 0x0e00
#define PRID_IMP_R8000 0x1000
+#define PRID_IMP_PR4450 0x1200
#define PRID_IMP_R4600 0x2000
#define PRID_IMP_R4700 0x2100
#define PRID_IMP_TX39 0x2200
@@ -60,6 +67,13 @@
#define PRID_IMP_RM9000 0x3400
#define PRID_IMP_R5432 0x5400
#define PRID_IMP_R5500 0x5500
+
+#define PRID_IMP_UNKNOWN 0xff00
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_MIPS
+ */
+
#define PRID_IMP_4KC 0x8000
#define PRID_IMP_5KC 0x8100
#define PRID_IMP_20KC 0x8200
@@ -71,14 +85,15 @@
#define PRID_IMP_4KEMPR2 0x9100
#define PRID_IMP_4KSD 0x9200
#define PRID_IMP_24K 0x9300
-
-#define PRID_IMP_UNKNOWN 0xff00
+#define PRID_IMP_34K 0x9500
+#define PRID_IMP_24KE 0x9600
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
*/
#define PRID_IMP_SB1 0x0100
+#define PRID_IMP_SB1A 0x1100
/*
* These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
@@ -177,7 +192,11 @@
#define CPU_VR4133 56
#define CPU_AU1550 57
#define CPU_24K 58
-#define CPU_LAST 58
+#define CPU_AU1200 59
+#define CPU_34K 60
+#define CPU_PR4450 61
+#define CPU_SB1A 62
+#define CPU_LAST 62
/*
* ISA Level encodings
@@ -200,23 +219,37 @@
* CPU Option encodings
*/
#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */
-/* Leave a spare bit for variant MMU types... */
-#define MIPS_CPU_4KEX 0x00000004 /* "R4K" exception model */
-#define MIPS_CPU_4KTLB 0x00000008 /* "R4K" TLB handler */
-#define MIPS_CPU_FPU 0x00000010 /* CPU has FPU */
-#define MIPS_CPU_32FPR 0x00000020 /* 32 dbl. prec. FP registers */
-#define MIPS_CPU_COUNTER 0x00000040 /* Cycle count/compare */
-#define MIPS_CPU_WATCH 0x00000080 /* watchpoint registers */
-#define MIPS_CPU_MIPS16 0x00000100 /* code compression */
-#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */
-#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */
-#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */
-#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */
-#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */
-#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */
-#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */
-#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */
-#define MIPS_CPU_SUBSET_CACHES 0x00020000 /* P-cache subset enforced */
-#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */
+#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */
+#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */
+#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */
+#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */
+#define MIPS_CPU_SB1_CACHE 0x00000020 /* SB1-style caches */
+#define MIPS_CPU_FPU 0x00000040 /* CPU has FPU */
+#define MIPS_CPU_32FPR 0x00000080 /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER 0x00000100 /* Cycle count/compare */
+#define MIPS_CPU_WATCH 0x00000200 /* watchpoint registers */
+#define MIPS_CPU_DIVEC 0x00000400 /* dedicated interrupt vector */
+#define MIPS_CPU_VCE 0x00000800 /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P 0x00001000 /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S 0x00002000 /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK 0x00004000 /* Machine check exception */
+#define MIPS_CPU_EJTAG 0x00008000 /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX 0x00010000 /* no FPU exception */
+#define MIPS_CPU_LLSC 0x00020000 /* CPU has ll/sc instructions */
+#define MIPS_CPU_SUBSET_CACHES 0x00040000 /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH 0x00080000 /* CPU has usable prefetch */
+#define MIPS_CPU_VINT 0x00100000 /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC 0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */
+
+/*
+ * CPU ASE encodings
+ */
+#define MIPS_ASE_MIPS16 0x00000001 /* code compression */
+#define MIPS_ASE_MDMX 0x00000002 /* MIPS digital media extension */
+#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */
+#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */
+#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */
+#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */
+
#endif /* _ASM_CPU_H */
diff --git a/include/asm-mips/dec/ecc.h b/include/asm-mips/dec/ecc.h
index 724908b..19495a4 100644
--- a/include/asm-mips/dec/ecc.h
+++ b/include/asm-mips/dec/ecc.h
@@ -49,7 +49,8 @@
extern void dec_ecc_be_init(void);
extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
-extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
#endif
#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/include/asm-mips/dec/ioasic_addrs.h b/include/asm-mips/dec/ioasic_addrs.h
index 5e18a75..4cbc1f8 100644
--- a/include/asm-mips/dec/ioasic_addrs.h
+++ b/include/asm-mips/dec/ioasic_addrs.h
@@ -45,7 +45,8 @@
/*
- * Offsets for I/O ASIC registers (relative to (system_base + IOASIC_IOCTL)).
+ * Offsets for I/O ASIC registers
+ * (relative to (dec_kn_slot_base + IOASIC_IOCTL)).
*/
/* all systems */
#define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */
diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h
index 9469435..eb522aa 100644
--- a/include/asm-mips/dec/kn01.h
+++ b/include/asm-mips/dec/kn01.h
@@ -8,14 +8,12 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN01_H
#define __ASM_MIPS_DEC_KN01_H
-#include <asm/addrspace.h>
-
-#define KN01_SLOT_BASE KSEG1ADDR(0x10000000)
+#define KN01_SLOT_BASE 0x10000000
#define KN01_SLOT_SIZE 0x01000000
/*
@@ -41,17 +39,9 @@
/*
- * Some port addresses...
- */
-#define KN01_LANCE_BASE (KN01_SLOT_BASE + KN01_LANCE) /* 0xB8000000 */
-#define KN01_DZ11_BASE (KN01_SLOT_BASE + KN01_DZ11) /* 0xBC000000 */
-#define KN01_RTC_BASE (KN01_SLOT_BASE + KN01_RTC) /* 0xBD000000 */
-
-
-/*
* Frame buffer memory address.
*/
-#define KN01_VFB_MEM KSEG1ADDR(0x0fc00000)
+#define KN01_VFB_MEM 0x0fc00000
/*
* CPU interrupt bits.
@@ -80,4 +70,22 @@
#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */
#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+#endif
+
#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h
index f797f70..8319ad7 100644
--- a/include/asm-mips/dec/kn02.h
+++ b/include/asm-mips/dec/kn02.h
@@ -8,21 +8,12 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN02_H
#define __ASM_MIPS_DEC_KN02_H
-#ifndef __ASSEMBLY__
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#endif
-
-#include <asm/addrspace.h>
-#include <asm/dec/ecc.h>
-
-
-#define KN02_SLOT_BASE KSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_BASE 0x1fc00000
#define KN02_SLOT_SIZE 0x00080000
/*
@@ -39,22 +30,14 @@
/*
- * Some port addresses...
- */
-#define KN02_DZ11_BASE (KN02_SLOT_BASE + KN02_DZ11) /* DZ11 */
-#define KN02_RTC_BASE (KN02_SLOT_BASE + KN02_RTC) /* RTC */
-#define KN02_CSR_BASE (KN02_SLOT_BASE + KN02_CSR) /* CSR */
-
-
-/*
* System Control & Status Register bits.
*/
#define KN02_CSR_RES_28 (0xf<<28) /* unused */
#define KN02_CSR_PSU (1<<27) /* power supply unit warning */
#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */
#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */
-#define KN03_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
-#define KN03_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
+#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */
@@ -63,8 +46,8 @@
#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */
#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */
#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */
-#define KN03_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
-#define KN03_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
/*
@@ -98,6 +81,10 @@
#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
extern u32 cached_kn02_csr;
extern spinlock_t kn02_lock;
extern void init_kn02_irqs(int base);
diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h
index 648c4dc..a25f3d7 100644
--- a/include/asm-mips/dec/kn02xa.h
+++ b/include/asm-mips/dec/kn02xa.h
@@ -9,7 +9,7 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
*
* These are addresses which have to be known early in the boot process.
* For other addresses refer to tc.h, ioasic_addrs.h and friends.
@@ -17,31 +17,23 @@
#ifndef __ASM_MIPS_DEC_KN02XA_H
#define __ASM_MIPS_DEC_KN02XA_H
-#include <asm/addrspace.h>
#include <asm/dec/ioasic_addrs.h>
-#define KN02XA_SLOT_BASE KSEG1ADDR(0x1c000000)
-
-/*
- * Some port addresses...
- */
-#define KN02XA_IOASIC_BASE (KN02XA_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */
-#define KN02XA_RTC_BASE (KN02XA_SLOT_BASE + IOASIC_TOY) /* RTC */
-
+#define KN02XA_SLOT_BASE 0x1c000000
/*
* Memory control ASIC registers.
*/
-#define KN02XA_MER KSEG1ADDR(0x0c400000) /* memory error register */
-#define KN02XA_MSR KSEG1ADDR(0x0c800000) /* memory size register */
+#define KN02XA_MER 0x0c400000 /* memory error register */
+#define KN02XA_MSR 0x0c800000 /* memory size register */
/*
* CPU control ASIC registers.
*/
-#define KN02XA_MEM_CONF KSEG1ADDR(0x0e000000) /* write timeout config */
-#define KN02XA_EAR KSEG1ADDR(0x0e000004) /* error address register */
-#define KN02XA_BOOT0 KSEG1ADDR(0x0e000008) /* boot 0 register */
-#define KN02XA_MEM_INTR KSEG1ADDR(0x0e00000c) /* write err IRQ stat & ack */
+#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */
+#define KN02XA_EAR 0x0e000004 /* error address register */
+#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */
+#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */
/*
* Memory Error Register bits, common definitions.
@@ -52,8 +44,13 @@
#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */
#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */
#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */
-#define KN02XA_MER_RES_12 (0x3<<12) /* unused */
-#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask */
+#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12 (1<<12) /* unused */
+#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */
+#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */
+#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */
+#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */
#define KN02XA_MER_RES_0 (0xff<<0) /* unused */
/*
@@ -72,4 +69,17 @@
#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */
#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+#endif
+
#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/include/asm-mips/dec/kn03.h b/include/asm-mips/dec/kn03.h
index 676abd1..edede92 100644
--- a/include/asm-mips/dec/kn03.h
+++ b/include/asm-mips/dec/kn03.h
@@ -10,24 +10,15 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN03_H
#define __ASM_MIPS_DEC_KN03_H
-#include <asm/addrspace.h>
#include <asm/dec/ecc.h>
#include <asm/dec/ioasic_addrs.h>
-#define KN03_SLOT_BASE KSEG1ADDR(0x1f800000)
-
-/*
- * Some port addresses...
- */
-#define KN03_IOASIC_BASE (KN03_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */
-#define KN03_RTC_BASE (KN03_SLOT_BASE + IOASIC_TOY) /* RTC */
-#define KN03_MCR_BASE (KN03_SLOT_BASE + IOASIC_MCR) /* MCR */
-
+#define KN03_SLOT_BASE 0x1f800000
/*
* CPU interrupt bits.
diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h
index b120362..15fe8f8 100644
--- a/include/asm-mips/dec/kn05.h
+++ b/include/asm-mips/dec/kn05.h
@@ -1,10 +1,12 @@
/*
* include/asm-mips/dec/kn05.h
*
- * DECstation 5000/260 (4max+ or KN05) and DECsystem 5900/260
+ * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
* definitions.
*
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -13,8 +15,8 @@
*
* WARNING! All this information is pure guesswork based on the
* ROM. It is provided here in hope it will give someone some
- * food for thought. No documentation for the KN05 module has
- * been located so far.
+ * food for thought. No documentation for the KN05 nor the KN04
+ * module has been located so far.
*/
#ifndef __ASM_MIPS_DEC_KN05_H
#define __ASM_MIPS_DEC_KN05_H
@@ -24,48 +26,50 @@
/*
* The oncard MB (Memory Buffer) ASIC provides an additional address
* decoder. Certain address ranges within the "high" 16 slots are
- * passed to the I/O ASIC's decoder like with the KN03. Others are
- * handled locally. "Low" slots are always passed.
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally. "Low" slots are always passed.
*/
-#define KN05_MB_ROM (16*IOASIC_SLOT_SIZE) /* KN05 card ROM */
-#define KN05_IOCTL (17*IOASIC_SLOT_SIZE) /* I/O ASIC */
-#define KN05_ESAR (18*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
-#define KN05_LANCE (19*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
-#define KN05_MB_INT (20*IOASIC_SLOT_SIZE) /* MB interrupt register */
-#define KN05_MB_EA (21*IOASIC_SLOT_SIZE) /* MB error address? */
-#define KN05_MB_EC (22*IOASIC_SLOT_SIZE) /* MB error ??? */
-#define KN05_MB_CSR (23*IOASIC_SLOT_SIZE) /* MB control & status */
-#define KN05_RES_24 (24*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_25 (25*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_26 (26*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_27 (27*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_SCSI (28*IOASIC_SLOT_SIZE) /* ASC SCSI */
-#define KN05_RES_29 (29*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_30 (30*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_31 (31*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SLOT_BASE 0x1fc00000
+
+#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */
+#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */
+#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
+#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
+#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */
+#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */
+#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */
+#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */
+#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */
+#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */
/*
* Bits for the MB interrupt register.
* The register appears read-only.
*/
-#define KN05_MB_INT_TC (1<<0) /* TURBOchannel? */
-#define KN05_MB_INT_RTC (1<<1) /* RTC? */
-#define KN05_MB_INT_MT (1<<3) /* ??? */
+#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */
+#define KN4K_MB_INT_RTC (1<<1) /* RTC? */
+#define KN4K_MB_INT_MT (1<<3) /* ??? */
/*
* Bits for the MB control & status register.
* Set to 0x00bf8001 on my system by the ROM.
*/
-#define KN05_MB_CSR_PF (1<<0) /* PreFetching enable? */
-#define KN05_MB_CSR_F (1<<1) /* ??? */
-#define KN05_MB_CSR_ECC (0xff<<2) /* ??? */
-#define KN05_MB_CSR_OD (1<<10) /* ??? */
-#define KN05_MB_CSR_CP (1<<11) /* ??? */
-#define KN05_MB_CSR_UNC (1<<12) /* ??? */
-#define KN05_MB_CSR_IM (1<<13) /* ??? */
-#define KN05_MB_CSR_NC (1<<14) /* ??? */
-#define KN05_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
-#define KN05_MB_CSR_MSK (0x1f<<16) /* ??? */
-#define KN05_MB_CSR_FW (1<<21) /* ??? */
+#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */
+#define KN4K_MB_CSR_F (1<<1) /* ??? */
+#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */
+#define KN4K_MB_CSR_OD (1<<10) /* ??? */
+#define KN4K_MB_CSR_CP (1<<11) /* ??? */
+#define KN4K_MB_CSR_UNC (1<<12) /* ??? */
+#define KN4K_MB_CSR_IM (1<<13) /* ??? */
+#define KN4K_MB_CSR_NC (1<<14) /* ??? */
+#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK (0x1f<<16) /* ??? */
+#define KN4K_MB_CSR_FW (1<<21) /* ??? */
#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/include/asm-mips/dec/prom.h b/include/asm-mips/dec/prom.h
index a05d6d3..1384dd0 100644
--- a/include/asm-mips/dec/prom.h
+++ b/include/asm-mips/dec/prom.h
@@ -24,7 +24,7 @@
* PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
* Many of these will work for MIPSen as well!
*/
-#define VEC_RESET (u64 *)KSEG1ADDR(0x1fc00000)
+#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000)
/* Prom base address */
#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */
@@ -111,19 +111,21 @@
* On MIPS64 we have to call PROM functions via a helper
* dispatcher to accomodate ABI incompatibilities.
*/
-#define __DEC_PROM_O32 __attribute__((alias("call_o32")))
+#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
+ __asm__(#fun " = call_o32")
-int _rex_bootinit(int (*)(void)) __DEC_PROM_O32;
-int _rex_bootread(int (*)(void)) __DEC_PROM_O32;
-int _rex_getbitmap(int (*)(memmap *), memmap *) __DEC_PROM_O32;
-unsigned long *_rex_slot_address(unsigned long *(*)(int), int) __DEC_PROM_O32;
-void *_rex_gettcinfo(void *(*)(void)) __DEC_PROM_O32;
-int _rex_getsysid(int (*)(void)) __DEC_PROM_O32;
-void _rex_clear_cache(void (*)(void)) __DEC_PROM_O32;
+int __DEC_PROM_O32(_rex_bootinit, (int (*)(void)));
+int __DEC_PROM_O32(_rex_bootread, (int (*)(void)));
+int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *));
+unsigned long *__DEC_PROM_O32(_rex_slot_address,
+ (unsigned long *(*)(int), int));
+void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void)));
+int __DEC_PROM_O32(_rex_getsysid, (int (*)(void)));
+void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void)));
-int _prom_getchar(int (*)(void)) __DEC_PROM_O32;
-char *_prom_getenv(char *(*)(char *), char *) __DEC_PROM_O32;
-int _prom_printf(int (*)(char *, ...), char *, ...) __DEC_PROM_O32;
+int __DEC_PROM_O32(_prom_getchar, (int (*)(void)));
+char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *));
+int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...));
#define rex_bootinit() _rex_bootinit(__rex_bootinit)
diff --git a/include/asm-mips/dec/system.h b/include/asm-mips/dec/system.h
new file mode 100644
index 0000000..78af51f
--- /dev/null
+++ b/include/asm-mips/dec/system.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-mips/dec/system.h
+ *
+ * Generic DECstation/DECsystem bits.
+ *
+ * Copyright (C) 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_DEC_SYSTEM_H
+#define __ASM_DEC_SYSTEM_H
+
+extern unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+#endif /* __ASM_DEC_SYSTEM_H */
diff --git a/include/asm-mips/dec/tc.h b/include/asm-mips/dec/tc.h
index d7bba43..9cb51f2 100644
--- a/include/asm-mips/dec/tc.h
+++ b/include/asm-mips/dec/tc.h
@@ -7,10 +7,8 @@
*
* Copyright (c) 1998 Harald Koerfgen
*/
-#ifndef ASM_TC_H
-#define ASM_TC_H
-
-extern unsigned long system_base;
+#ifndef __ASM_DEC_TC_H
+#define __ASM_DEC_TC_H
/*
* Search for a TURBOchannel Option Module
@@ -36,8 +34,8 @@
*/
extern unsigned long get_tc_irq_nr(int);
/*
- * Return TURBOchannel clock frequency in hz
+ * Return TURBOchannel clock frequency in Hz
*/
extern unsigned long get_tc_speed(void);
-#endif
+#endif /* __ASM_DEC_TC_H */
diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h
index a606dbe..85435a8 100644
--- a/include/asm-mips/delay.h
+++ b/include/asm-mips/delay.h
@@ -12,11 +12,9 @@
#include <linux/config.h>
#include <linux/param.h>
-
+#include <linux/smp.h>
#include <asm/compiler.h>
-extern unsigned long loops_per_jiffy;
-
static inline void __delay(unsigned long loops)
{
if (sizeof(long) == 4)
@@ -82,11 +80,7 @@
__delay(usecs);
}
-#ifdef CONFIG_SMP
#define __udelay_val cpu_data[smp_processor_id()].udelay_val
-#else
-#define __udelay_val loops_per_jiffy
-#endif
#define udelay(usecs) __udelay((usecs),__udelay_val)
diff --git a/include/asm-mips/dsp.h b/include/asm-mips/dsp.h
new file mode 100644
index 0000000..50f556b
--- /dev/null
+++ b/include/asm-mips/dsp.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2005 Mips Technologies
+ * Author: Chris Dearman, chris@mips.com derived from fpu.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_DSP_H
+#define _ASM_DSP_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+
+#define DSP_DEFAULT 0x00000000
+#define DSP_MASK 0x1f
+
+#define __enable_dsp_hazard() \
+do { \
+ asm("_ehb"); \
+} while (0)
+
+static inline void __init_dsp(void)
+{
+ mthi1(0);
+ mtlo1(0);
+ mthi2(0);
+ mtlo2(0);
+ mthi3(0);
+ mtlo3(0);
+ wrdsp(DSP_DEFAULT, DSP_MASK);
+}
+
+static inline void init_dsp(void)
+{
+ if (cpu_has_dsp)
+ __init_dsp();
+}
+
+#define __save_dsp(tsk) \
+do { \
+ tsk->thread.dsp.dspr[0] = mfhi1(); \
+ tsk->thread.dsp.dspr[1] = mflo1(); \
+ tsk->thread.dsp.dspr[2] = mfhi2(); \
+ tsk->thread.dsp.dspr[3] = mflo2(); \
+ tsk->thread.dsp.dspr[4] = mfhi3(); \
+ tsk->thread.dsp.dspr[5] = mflo3(); \
+} while (0)
+
+#define save_dsp(tsk) \
+do { \
+ if (cpu_has_dsp) \
+ __save_dsp(tsk); \
+} while (0)
+
+#define __restore_dsp(tsk) \
+do { \
+ mthi1(tsk->thread.dsp.dspr[0]); \
+ mtlo1(tsk->thread.dsp.dspr[1]); \
+ mthi2(tsk->thread.dsp.dspr[2]); \
+ mtlo2(tsk->thread.dsp.dspr[3]); \
+ mthi3(tsk->thread.dsp.dspr[4]); \
+ mtlo3(tsk->thread.dsp.dspr[5]); \
+} while (0)
+
+#define restore_dsp(tsk) \
+do { \
+ if (cpu_has_dsp) \
+ __restore_dsp(tsk); \
+} while (0)
+
+#define __get_dsp_regs(tsk) \
+({ \
+ if (tsk == current) \
+ __save_dsp(current); \
+ \
+ tsk->thread.dsp.dspr; \
+})
+
+#endif /* _ASM_DSP_H */
diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h
index e488114..7420f12 100644
--- a/include/asm-mips/elf.h
+++ b/include/asm-mips/elf.h
@@ -2,6 +2,8 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
+ *
+ * Much of this is taken from binutils and GNU libc ...
*/
#ifndef _ASM_ELF_H
#define _ASM_ELF_H
@@ -17,6 +19,8 @@
#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */
#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */
+#define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */
+#define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */
/* The ABI of a file. */
#define EF_MIPS_ABI_O32 0x00001000 /* O32 ABI. */
@@ -105,7 +109,11 @@
#define R_MIPS_LOVENDOR 100
#define R_MIPS_HIVENDOR 127
-#define SHN_MIPS_ACCOMON 0xff00
+#define SHN_MIPS_ACCOMON 0xff00 /* Allocated common symbols */
+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
#define SHT_MIPS_LIST 0x70000000
#define SHT_MIPS_CONFLICT 0x70000002
@@ -193,50 +201,92 @@
#ifdef __KERNEL__
+struct mips_abi;
+
+extern struct mips_abi mips_abi;
+extern struct mips_abi mips_abi_32;
+extern struct mips_abi mips_abi_n32;
+
#ifdef CONFIG_32BIT
-#define SET_PERSONALITY(ex, ibcs2) \
-do { \
- if (ibcs2) \
- set_personality(PER_SVR4); \
- set_personality(PER_LINUX); \
+#define SET_PERSONALITY(ex, ibcs2) \
+do { \
+ if (ibcs2) \
+ set_personality(PER_SVR4); \
+ set_personality(PER_LINUX); \
+ \
+ current->thread.abi = &mips_abi; \
} while (0)
#endif /* CONFIG_32BIT */
#ifdef CONFIG_64BIT
-#define SET_PERSONALITY(ex, ibcs2) \
-do { current->thread.mflags &= ~MF_ABI_MASK; \
- if ((ex).e_ident[EI_CLASS] == ELFCLASS32) { \
- if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \
- ((ex).e_flags & EF_MIPS_ABI) == 0) \
- current->thread.mflags |= MF_N32; \
- else \
- current->thread.mflags |= MF_O32; \
- } else \
- current->thread.mflags |= MF_N64; \
- if (ibcs2) \
- set_personality(PER_SVR4); \
- else if (current->personality != PER_LINUX32) \
- set_personality(PER_LINUX); \
+#ifdef CONFIG_MIPS32_N32
+#define __SET_PERSONALITY32_N32() \
+ do { \
+ current->thread.mflags |= MF_N32; \
+ current->thread.abi = &mips_abi_n32; \
+ } while (0)
+#else
+#define __SET_PERSONALITY32_N32() \
+ do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+#define __SET_PERSONALITY32_O32() \
+ do { \
+ current->thread.mflags |= MF_O32; \
+ current->thread.abi = &mips_abi_32; \
+ } while (0)
+#else
+#define __SET_PERSONALITY32_O32() \
+ do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_COMPAT
+#define __SET_PERSONALITY32(ex) \
+do { \
+ if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \
+ ((ex).e_flags & EF_MIPS_ABI) == 0) \
+ __SET_PERSONALITY32_N32(); \
+ else \
+ __SET_PERSONALITY32_O32(); \
+} while (0)
+#else
+#define __SET_PERSONALITY32(ex) do { } while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2) \
+do { \
+ current->thread.mflags &= ~MF_ABI_MASK; \
+ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ __SET_PERSONALITY32(ex); \
+ else { \
+ current->thread.mflags |= MF_N64; \
+ current->thread.abi = &mips_abi; \
+ } \
+ \
+ if (ibcs2) \
+ set_personality(PER_SVR4); \
+ else if (current->personality != PER_LINUX32) \
+ set_personality(PER_LINUX); \
} while (0)
#endif /* CONFIG_64BIT */
extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
#define ELF_CORE_COPY_REGS(elf_regs, regs) \
dump_regs((elf_greg_t *)&(elf_regs), regs);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
dump_task_fpu(tsk, elf_fpregs)
#endif /* __KERNEL__ */
-/* This one accepts IRIX binaries. */
-#define irix_elf_check_arch(hdr) ((hdr)->e_flags & RHF_SGI_ONLY)
-
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE PAGE_SIZE
diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h
index 3c0d840..9d3e6e7 100644
--- a/include/asm-mips/errno.h
+++ b/include/asm-mips/errno.h
@@ -119,6 +119,10 @@
#define EOWNERDEAD 165 /* Owner died */
#define ENOTRECOVERABLE 166 /* State not recoverable */
+/* for robust mutexes */
+#define EOWNERDEAD 165 /* Owner died */
+#define ENOTRECOVERABLE 166 /* State not recoverable */
+
#define EDQUOT 1133 /* Quota exceeded */
#ifdef __KERNEL__
diff --git a/include/asm-mips/fcntl.h b/include/asm-mips/fcntl.h
index 06c5d13..43d047a 100644
--- a/include/asm-mips/fcntl.h
+++ b/include/asm-mips/fcntl.h
@@ -3,11 +3,13 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1995, 96, 97, 98, 99, 2003 Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle
*/
#ifndef _ASM_FCNTL_H
#define _ASM_FCNTL_H
+#include <linux/config.h>
+
#define O_APPEND 0x0008
#define O_SYNC 0x0010
#define O_NONBLOCK 0x0080
@@ -40,13 +42,13 @@
* contain all the same fields as struct flock.
*/
-#ifndef __mips64
+#ifdef CONFIG_32BIT
struct flock {
short l_type;
short l_whence;
- __kernel_off_t l_start;
- __kernel_off_t l_len;
+ off_t l_start;
+ off_t l_len;
long l_sysid;
__kernel_pid_t l_pid;
long pad[4];
@@ -54,13 +56,8 @@
#define HAVE_ARCH_STRUCT_FLOCK
-#endif
+#endif /* CONFIG_32BIT */
#include <asm-generic/fcntl.h>
-typedef struct flock flock_t;
-#ifndef __mips64
-typedef struct flock64 flock64_t;
-#endif
-
#endif /* _ASM_FCNTL_H */
diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h
index 26b6a90..73a3028 100644
--- a/include/asm-mips/fixmap.h
+++ b/include/asm-mips/fixmap.h
@@ -107,4 +107,11 @@
return __virt_to_fix(vaddr);
}
+/*
+ * Called from pgtable_init()
+ */
+extern void fixrange_init(unsigned long start, unsigned long end,
+ pgd_t *pgd_base);
+
+
#endif
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index ea24e73..9c828b1 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -80,9 +80,14 @@
#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU)
+static inline int __is_fpu_owner(void)
+{
+ return test_thread_flag(TIF_USEDFPU);
+}
+
static inline int is_fpu_owner(void)
{
- return cpu_has_fpu && test_thread_flag(TIF_USEDFPU);
+ return cpu_has_fpu && __is_fpu_owner();
}
static inline void own_fpu(void)
@@ -127,7 +132,7 @@
static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
{
if (cpu_has_fpu) {
- if ((tsk == current) && is_fpu_owner())
+ if ((tsk == current) && __is_fpu_owner())
_save_fp(current);
return tsk->thread.fpu.hard.fpr;
}
diff --git a/include/asm-mips/fpu_emulator.h b/include/asm-mips/fpu_emulator.h
index 46972ae..16cb4d1 100644
--- a/include/asm-mips/fpu_emulator.h
+++ b/include/asm-mips/fpu_emulator.h
@@ -23,16 +23,15 @@
#ifndef _ASM_FPU_EMULATOR_H
#define _ASM_FPU_EMULATOR_H
-struct mips_fpu_emulator_private {
- unsigned int eir;
- struct {
- unsigned int emulated;
- unsigned int loads;
- unsigned int stores;
- unsigned int cp1ops;
- unsigned int cp1xops;
- unsigned int errors;
- } stats;
+struct mips_fpu_emulator_stats {
+ unsigned int emulated;
+ unsigned int loads;
+ unsigned int stores;
+ unsigned int cp1ops;
+ unsigned int cp1xops;
+ unsigned int errors;
};
+extern struct mips_fpu_emulator_stats fpuemustats;
+
#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h
index 9feff4c..2454c44 100644
--- a/include/asm-mips/futex.h
+++ b/include/asm-mips/futex.h
@@ -3,10 +3,45 @@
#ifdef __KERNEL__
+#include <linux/config.h>
#include <linux/futex.h>
#include <asm/errno.h>
#include <asm/uaccess.h>
+#ifdef CONFIG_SMP
+#define __FUTEX_SMP_SYNC " sync \n"
+#else
+#define __FUTEX_SMP_SYNC
+#endif
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+{ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, (%3) # __futex_atomic_op1 \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, (%3) \n" \
+ " beqzl $1, 1b \n" \
+ __FUTEX_SMP_SYNC \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %5 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=r" (oldval) \
+ : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+}
+
static inline int
futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
{
@@ -25,10 +60,25 @@
switch (op) {
case FUTEX_OP_SET:
+ __futex_atomic_op("move $1, %z4", ret, oldval, uaddr, oparg);
+ break;
+
case FUTEX_OP_ADD:
+ __futex_atomic_op("addu $1, %1, %z4",
+ ret, oldval, uaddr, oparg);
+ break;
case FUTEX_OP_OR:
+ __futex_atomic_op("or $1, %1, %z4",
+ ret, oldval, uaddr, oparg);
+ break;
case FUTEX_OP_ANDN:
+ __futex_atomic_op("and $1, %1, %z4",
+ ret, oldval, uaddr, ~oparg);
+ break;
case FUTEX_OP_XOR:
+ __futex_atomic_op("xor $1, %1, %z4",
+ ret, oldval, uaddr, oparg);
+ break;
default:
ret = -ENOSYS;
}
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index f524eac..7517189 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -74,7 +74,8 @@
#define irq_disable_hazard
_ehb
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -107,6 +108,7 @@
" .endm \n\t");
#ifdef CONFIG_CPU_RM9000
+
/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
@@ -124,6 +126,9 @@
".set\tmips32\n\t" \
"_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
+
+#define back_to_back_c0_hazard() do { } while (0)
+
#else
/*
@@ -144,15 +149,13 @@
#endif
/*
- * mtc0->mfc0 hazard
- * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
- * It is a MIPS32R2 processor so ehb will clear the hazard.
+ * Interrupt enable/disable hazards
+ * Some processors have hazards when modifying
+ * the status register to change the interrupt state
*/
#ifdef CONFIG_CPU_MIPSR2
-/*
- * Use a macro for ehb unless explicit support for MIPSR2 is enabled
- */
+
__asm__(
" .macro\tirq_enable_hazard \n\t"
" _ehb \n\t"
@@ -160,17 +163,26 @@
" \n\t"
" .macro\tirq_disable_hazard \n\t"
" _ehb \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tback_to_back_c0_hazard \n\t"
+ " _ehb \n\t"
" .endm");
#define irq_enable_hazard() \
__asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_enable_hazard")
+ "irq_enable_hazard")
#define irq_disable_hazard() \
__asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_disable_hazard")
+ "irq_disable_hazard")
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__( \
+ "back_to_back_c0_hazard")
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -186,6 +198,8 @@
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() do { } while (0)
+#define back_to_back_c0_hazard() do { } while (0)
+
#else
/*
@@ -208,8 +222,30 @@
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() \
__asm__ __volatile__( \
- "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+ "irq_disable_hazard")
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__( \
+ " .set noreorder \n" \
+ " nop; nop; nop \n" \
+ " .set reorder \n")
+
+#endif
+
+#ifdef CONFIG_CPU_MIPSR2
+#define instruction_hazard() \
+do { \
+__label__ __next; \
+ __asm__ __volatile__( \
+ " jr.hb %0 \n" \
+ : \
+ : "r" (&&__next)); \
+__next: \
+ ; \
+} while (0)
+
+#else
+#define instruction_hazard() do { } while (0)
#endif
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-mips/highmem.h b/include/asm-mips/highmem.h
index f49930d..8cf5984 100644
--- a/include/asm-mips/highmem.h
+++ b/include/asm-mips/highmem.h
@@ -75,6 +75,7 @@
}
static inline void kunmap_atomic(void *kvaddr, enum km_type type) { }
+#define kmap_atomic_pfn(pfn, idx) page_address(pfn_to_page(pfn))
#define kmap_atomic_to_page(ptr) virt_to_page(ptr)
@@ -86,6 +87,7 @@
extern void __kunmap(struct page *page);
extern void *__kmap_atomic(struct page *page, enum km_type type);
extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
extern struct page *__kmap_atomic_to_page(void *ptr);
#define kmap __kmap
diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h
index 6ad5172..e0745f4 100644
--- a/include/asm-mips/inst.h
+++ b/include/asm-mips/inst.h
@@ -28,7 +28,7 @@
sdl_op, sdr_op, swr_op, cache_op,
ll_op, lwc1_op, lwc2_op, pref_op,
lld_op, ldc1_op, ldc2_op, ld_op,
- sc_op, swc1_op, swc2_op, major_3b_op, /* Opcode 0x3b is unused */
+ sc_op, swc1_op, swc2_op, rdhwr_op,
scd_op, sdc1_op, sdc2_op, sd_op
};
@@ -62,10 +62,10 @@
spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
tgei_op, tgeiu_op, tlti_op, tltiu_op,
teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
- bltzal_op, bgezal_op, bltzall_op, bgezall_op
- /*
- * The others (0x14 - 0x1f) are unused.
- */
+ bltzal_op, bgezal_op, bltzall_op, bgezall_op,
+ rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
+ rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
+ bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
};
/*
diff --git a/include/asm-mips/interrupt.h b/include/asm-mips/interrupt.h
index e8357f5..a573576 100644
--- a/include/asm-mips/interrupt.h
+++ b/include/asm-mips/interrupt.h
@@ -11,20 +11,25 @@
#ifndef _ASM_INTERRUPT_H
#define _ASM_INTERRUPT_H
+#include <linux/config.h>
#include <asm/hazards.h>
__asm__ (
- ".macro\tlocal_irq_enable\n\t"
- ".set\tpush\n\t"
- ".set\treorder\n\t"
- ".set\tnoat\n\t"
- "mfc0\t$1,$12\n\t"
- "ori\t$1,0x1f\n\t"
- "xori\t$1,0x1e\n\t"
- "mtc0\t$1,$12\n\t"
- "irq_enable_hazard\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_irq_enable \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_CPU_MIPSR2
+ " ei \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1e \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_enable_hazard \n"
+ " .set pop \n"
+ " .endm");
static inline void local_irq_enable(void)
{
@@ -43,17 +48,21 @@
* no nops at all.
*/
__asm__ (
- ".macro\tlocal_irq_disable\n\t"
- ".set\tpush\n\t"
- ".set\tnoat\n\t"
- "mfc0\t$1,$12\n\t"
- "ori\t$1,1\n\t"
- "xori\t$1,1\n\t"
- ".set\tnoreorder\n\t"
- "mtc0\t$1,$12\n\t"
- "irq_disable_hazard\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_CPU_MIPSR2
+ " di \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,1 \n"
+ " xori $1,1 \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
static inline void local_irq_disable(void)
{
@@ -65,12 +74,12 @@
}
__asm__ (
- ".macro\tlocal_save_flags flags\n\t"
- ".set\tpush\n\t"
- ".set\treorder\n\t"
- "mfc0\t\\flags, $12\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_save_flags flags \n"
+ " .set push \n"
+ " .set reorder \n"
+ " mfc0 \\flags, $12 \n"
+ " .set pop \n"
+ " .endm \n");
#define local_save_flags(x) \
__asm__ __volatile__( \
@@ -78,18 +87,22 @@
: "=r" (x))
__asm__ (
- ".macro\tlocal_irq_save result\n\t"
- ".set\tpush\n\t"
- ".set\treorder\n\t"
- ".set\tnoat\n\t"
- "mfc0\t\\result, $12\n\t"
- "ori\t$1, \\result, 1\n\t"
- "xori\t$1, 1\n\t"
- ".set\tnoreorder\n\t"
- "mtc0\t$1, $12\n\t"
- "irq_disable_hazard\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_CPU_MIPSR2
+ " di \\result \n"
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 1 \n"
+ " xori $1, 1 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
#define local_irq_save(x) \
__asm__ __volatile__( \
@@ -99,19 +112,37 @@
: "memory")
__asm__ (
- ".macro\tlocal_irq_restore flags\n\t"
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- "mfc0\t$1, $12\n\t"
- "andi\t\\flags, 1\n\t"
- "ori\t$1, 1\n\t"
- "xori\t$1, 1\n\t"
- "or\t\\flags, $1\n\t"
- "mtc0\t\\flags, $12\n\t"
- "irq_disable_hazard\n\t"
- ".set\tat\n\t"
- ".set\treorder\n\t"
- ".endm");
+ " .macro local_irq_restore flags \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /*
+ * Slow, but doesn't suffer from a relativly unlikely race
+ * condition we're having since days 1.
+ */
+ " beqz \\flags, 1f \n"
+ " di \n"
+ " ei \n"
+ "1: \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /*
+ * Fast, dangerous. Life is fun, life is good.
+ */
+ " mfc0 $1, $12 \n"
+ " ins $1, \\flags, 0, 1 \n"
+ " mtc0 $1, $12 \n"
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 1 \n"
+ " xori $1, 1 \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set at \n"
+ " .set reorder \n"
+ " .endm \n");
#define local_irq_restore(flags) \
do { \
diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h
index 4cd36fe..92d90f7 100644
--- a/include/asm-mips/inventory.h
+++ b/include/asm-mips/inventory.h
@@ -4,6 +4,8 @@
#ifndef __ASM_INVENTORY_H
#define __ASM_INVENTORY_H
+#include <linux/compiler.h>
+
typedef struct inventory_s {
struct inventory_s *inv_next;
int inv_class;
@@ -14,7 +16,9 @@
} inventory_t;
extern int inventory_items;
-void add_to_inventory (int class, int type, int controller, int unit, int state);
-int dump_inventory_to_user (void *userbuf, int size);
+
+extern void add_to_inventory (int class, int type, int controller, int unit, int state);
+extern int dump_inventory_to_user (void __user *userbuf, int size);
+extern int __init init_inventory(void);
#endif /* __ASM_INVENTORY_H */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 039845f..3061870 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -25,7 +25,9 @@
#include <asm/page.h>
#include <asm/pgtable-bits.h>
#include <asm/processor.h>
+#include <asm/string.h>
+#include <ioremap.h>
#include <mangle-port.h>
/*
@@ -34,7 +36,7 @@
#undef CONF_SLOWDOWN_IO
/*
- * Raw operations are never swapped in software. Otoh values that raw
+ * Raw operations are never swapped in software. OTOH values that raw
* operations are working on may or may not have been swapped by the bus
* hardware. An example use would be for flash memory that's used for
* execute in place.
@@ -43,45 +45,53 @@
# define __raw_ioswabw(x) (x)
# define __raw_ioswabl(x) (x)
# define __raw_ioswabq(x) (x)
+# define ____raw_ioswabq(x) (x)
/*
* Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
* less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time. Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses. The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "mem_" prefix.
*/
#if defined(CONFIG_SWAP_IO_SPACE)
# define ioswabb(x) (x)
+# define mem_ioswabb(x) (x)
# ifdef CONFIG_SGI_IP22
/*
* IP22 seems braindead enough to swap 16bits values in hardware, but
* not 32bits. Go figure... Can't tell without documentation.
*/
# define ioswabw(x) (x)
+# define mem_ioswabw(x) le16_to_cpu(x)
# else
# define ioswabw(x) le16_to_cpu(x)
+# define mem_ioswabw(x) (x)
# endif
# define ioswabl(x) le32_to_cpu(x)
+# define mem_ioswabl(x) (x)
# define ioswabq(x) le64_to_cpu(x)
+# define mem_ioswabq(x) (x)
#else
# define ioswabb(x) (x)
+# define mem_ioswabb(x) (x)
# define ioswabw(x) (x)
+# define mem_ioswabw(x) cpu_to_le16(x)
# define ioswabl(x) (x)
+# define mem_ioswabl(x) cpu_to_le32(x)
# define ioswabq(x) (x)
+# define mem_ioswabq(x) cpu_to_le32(x)
#endif
-/*
- * Native bus accesses never swapped.
- */
-#define bus_ioswabb(x) (x)
-#define bus_ioswabw(x) (x)
-#define bus_ioswabl(x) (x)
-#define bus_ioswabq(x) (x)
-
-#define __bus_ioswabq bus_ioswabq
-
#define IO_SPACE_LIMIT 0xffff
/*
@@ -194,12 +204,14 @@
*/
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-extern void * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
extern void __iounmap(volatile void __iomem *addr);
-static inline void * __ioremap_mode(phys_t offset, unsigned long size,
+static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
unsigned long flags)
{
+#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+
if (cpu_has_64bit_addresses) {
u64 base = UNCAC_BASE;
@@ -209,10 +221,30 @@
*/
if (flags == _CACHE_UNCACHED)
base = (u64) IO_BASE;
- return (void *) (unsigned long) (base + offset);
+ return (void __iomem *) (unsigned long) (base + offset);
+ } else if (__builtin_constant_p(offset) &&
+ __builtin_constant_p(size) && __builtin_constant_p(flags)) {
+ phys_t phys_addr, last_addr;
+
+ phys_addr = fixup_bigphys_addr(offset, size);
+
+ /* Don't allow wraparound or zero size. */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Map uncached objects in the low 512MB of address
+ * space using KSEG1.
+ */
+ if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
+ flags == _CACHE_UNCACHED)
+ return (void __iomem *)CKSEG1ADDR(phys_addr);
}
return __ioremap(offset, size, flags);
+
+#undef __IS_LOW512
}
/*
@@ -264,12 +296,16 @@
static inline void iounmap(volatile void __iomem *addr)
{
- if (cpu_has_64bit_addresses)
+#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
+
+ if (cpu_has_64bit_addresses ||
+ (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
return;
__iounmap(addr);
-}
+#undef __IS_KSEG1
+}
#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \
\
@@ -319,7 +355,8 @@
else if (cpu_has_64bits) { \
unsigned long __flags; \
\
- local_irq_save(__flags); \
+ if (irq) \
+ local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
"ld %L0, %1" "\n\t" \
@@ -328,7 +365,8 @@
".set mips0" "\n" \
: "=r" (__val) \
: "m" (*__mem)); \
- local_irq_restore(__flags); \
+ if (irq) \
+ local_irq_restore(__flags); \
} else { \
__val = 0; \
BUG(); \
@@ -349,11 +387,11 @@
\
__val = pfx##ioswab##bwlq(val); \
\
- if (sizeof(type) != sizeof(u64)) { \
- *__addr = __val; \
- slow; \
- } else \
- BUILD_BUG(); \
+ /* Really, we want this to be atomic */ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ *__addr = __val; \
+ slow; \
} \
\
static inline type pfx##in##bwlq##p(unsigned long port) \
@@ -364,13 +402,10 @@
port = __swizzle_addr_##bwlq(port); \
__addr = (void *)(mips_io_port_base + port); \
\
- if (sizeof(type) != sizeof(u64)) { \
- __val = *__addr; \
- slow; \
- } else { \
- __val = 0; \
- BUILD_BUG(); \
- } \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ __val = *__addr; \
+ slow; \
\
return pfx##ioswab##bwlq(__val); \
}
@@ -379,27 +414,35 @@
\
__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
-#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
+#define BUILDIO_MEM(bwlq, type) \
\
-__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
-__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO(bwlq, type) \
- \
-__BUILD_MEMORY_PFX(, bwlq, type) \
__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
-__BUILD_MEMORY_PFX(bus_, bwlq, type) \
-__BUILD_IOPORT_PFX(, bwlq, type) \
-__BUILD_IOPORT_PFX(__raw_, bwlq, type)
+__BUILD_MEMORY_PFX(, bwlq, type) \
+__BUILD_MEMORY_PFX(mem_, bwlq, type) \
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+BUILDIO_MEM(q, u64)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
+ __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
+ __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type) \
+ __BUILD_IOPORT_PFX(, bwlq, type) \
+ __BUILD_IOPORT_PFX(mem_, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+#ifdef CONFIG_64BIT
+BUILDIO_IOPORT(q, u64)
+#endif
#define __BUILDIO(bwlq, type) \
\
-__BUILD_MEMORY_SINGLE(__bus_, bwlq, type, 0)
-
-BUILDIO(b, u8)
-BUILDIO(w, u16)
-BUILDIO(l, u32)
-BUILDIO(q, u64)
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
__BUILDIO(q, u64)
@@ -422,7 +465,7 @@
volatile type *__addr = addr; \
\
while (count--) { \
- __raw_write##bwlq(*__addr, mem); \
+ mem_write##bwlq(*__addr, mem); \
__addr++; \
} \
} \
@@ -433,20 +476,20 @@
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = __raw_read##bwlq(mem); \
+ *__addr = mem_read##bwlq(mem); \
__addr++; \
} \
}
#define __BUILD_IOPORT_STRING(bwlq, type) \
\
-static inline void outs##bwlq(unsigned long port, void *addr, \
+static inline void outs##bwlq(unsigned long port, const void *addr, \
unsigned int count) \
{ \
- volatile type *__addr = addr; \
+ const volatile type *__addr = addr; \
\
while (count--) { \
- __raw_out##bwlq(*__addr, port); \
+ mem_out##bwlq(*__addr, port); \
__addr++; \
} \
} \
@@ -457,7 +500,7 @@
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = __raw_in##bwlq(port); \
+ *__addr = mem_in##bwlq(port); \
__addr++; \
} \
}
@@ -470,15 +513,26 @@
BUILDSTRING(b, u8)
BUILDSTRING(w, u16)
BUILDSTRING(l, u32)
+#ifdef CONFIG_64BIT
BUILDSTRING(q, u64)
+#endif
/* Depends on MIPS II instruction set */
#define mmiowb() asm volatile ("sync" ::: "memory")
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ memcpy((void __force *) dst, src, count);
+}
/*
* Memory Mapped I/O
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 3f2470e..8a342cc 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -24,11 +24,9 @@
struct pt_regs;
-#ifdef CONFIG_PREEMPT
-
extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs);
-#else
+#ifdef CONFIG_PREEMPT
/*
* do_IRQ handles all normal device IRQ's (the special
diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h
index 86df317..baf4129 100644
--- a/include/asm-mips/jmr3927/jmr3927.h
+++ b/include/asm-mips/jmr3927/jmr3927.h
@@ -202,20 +202,6 @@
#endif /* !__ASSEMBLY__ */
/*
- * UART defines for serial.h
- */
-
-/* use Pre-scaler T0 (1/2) */
-#define JMR3927_BASE_BAUD (JMR3927_IMCLK / 2 / 16)
-
-#define UART0_ADDR 0xfffef300
-#define UART1_ADDR 0xfffef400
-#define UART0_INT JMR3927_IRQ_IRC_SIO0
-#define UART1_INT JMR3927_IRQ_IRC_SIO1
-#define UART0_FLAGS ASYNC_BOOT_AUTOCONF
-#define UART1_FLAGS 0
-
-/*
* IRQ mappings
*/
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 148bae2..8327ec3 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -60,59 +60,36 @@
mdelay(ms);
}
-void static inline au_writeb(u8 val, int reg)
+void static inline au_writeb(u8 val, unsigned long reg)
{
*(volatile u8 *)(reg) = val;
}
-void static inline au_writew(u16 val, int reg)
+void static inline au_writew(u16 val, unsigned long reg)
{
*(volatile u16 *)(reg) = val;
}
-void static inline au_writel(u32 val, int reg)
+void static inline au_writel(u32 val, unsigned long reg)
{
*(volatile u32 *)(reg) = val;
}
-static inline u8 au_readb(unsigned long port)
+static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)port);
+ return (*(volatile u8 *)reg);
}
-static inline u16 au_readw(unsigned long port)
+static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)port);
+ return (*(volatile u16 *)reg);
}
-static inline u32 au_readl(unsigned long port)
+static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)port);
+ return (*(volatile u32 *)reg);
}
-/* These next three functions should be a generic part of the MIPS
- * kernel (with the 'au_' removed from the name) and selected for
- * processors that support the instructions.
- * Taken from PPC tree. -- Dan
- */
-/* Return the bit position of the most significant 1 bit in a word */
-static __inline__ int __ilog2(unsigned int x)
-{
- int lz;
-
- asm volatile (
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- ".set\tmips32\n\t"
- "clz\t%0,%1\n\t"
- ".set\tmips0\n\t"
- ".set\tat\n\t"
- ".set\treorder"
- : "=r" (lz)
- : "r" (x));
-
- return 31 - lz;
-}
static __inline__ int au_ffz(unsigned int x)
{
@@ -162,28 +139,293 @@
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
#endif
-/* SDRAM Controller */
+/*
+ * SDRAM Register Offsets
+ */
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 0xB4000000
-#define MEM_SDMODE1 0xB4000004
-#define MEM_SDMODE2 0xB4000008
+#define MEM_SDMODE0 (0x0000)
+#define MEM_SDMODE1 (0x0004)
+#define MEM_SDMODE2 (0x0008)
+#define MEM_SDADDR0 (0x000C)
+#define MEM_SDADDR1 (0x0010)
+#define MEM_SDADDR2 (0x0014)
+#define MEM_SDREFCFG (0x0018)
+#define MEM_SDPRECMD (0x001C)
+#define MEM_SDAUTOREF (0x0020)
+#define MEM_SDWRMD0 (0x0024)
+#define MEM_SDWRMD1 (0x0028)
+#define MEM_SDWRMD2 (0x002C)
+#define MEM_SDSLEEP (0x0030)
+#define MEM_SDSMCKE (0x0034)
-#define MEM_SDADDR0 0xB400000C
-#define MEM_SDADDR1 0xB4000010
-#define MEM_SDADDR2 0xB4000014
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F (1<<22)
+#define MEM_SDMODE_SR (1<<21)
+#define MEM_SDMODE_BS (1<<20)
+#define MEM_SDMODE_RS (3<<18)
+#define MEM_SDMODE_CS (7<<15)
+#define MEM_SDMODE_TRAS (15<<11)
+#define MEM_SDMODE_TMRD (3<<9)
+#define MEM_SDMODE_TWR (3<<7)
+#define MEM_SDMODE_TRP (3<<5)
+#define MEM_SDMODE_TRCD (3<<3)
+#define MEM_SDMODE_TCL (7<<0)
-#define MEM_SDREFCFG 0xB4000018
-#define MEM_SDPRECMD 0xB400001C
-#define MEM_SDAUTOREF 0xB4000020
+#define MEM_SDMODE_BS_2Bank (0<<20)
+#define MEM_SDMODE_BS_4Bank (1<<20)
+#define MEM_SDMODE_RS_11Row (0<<18)
+#define MEM_SDMODE_RS_12Row (1<<18)
+#define MEM_SDMODE_RS_13Row (2<<18)
+#define MEM_SDMODE_RS_N(N) ((N)<<18)
+#define MEM_SDMODE_CS_7Col (0<<15)
+#define MEM_SDMODE_CS_8Col (1<<15)
+#define MEM_SDMODE_CS_9Col (2<<15)
+#define MEM_SDMODE_CS_10Col (3<<15)
+#define MEM_SDMODE_CS_11Col (4<<15)
+#define MEM_SDMODE_CS_N(N) ((N)<<15)
+#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
+#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
+#define MEM_SDMODE_TWR_N(N) ((N)<<7)
+#define MEM_SDMODE_TRP_N(N) ((N)<<5)
+#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
+#define MEM_SDMODE_TCL_N(N) ((N)<<0)
-#define MEM_SDWRMD0 0xB4000024
-#define MEM_SDWRMD1 0xB4000028
-#define MEM_SDWRMD2 0xB400002C
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E (1<<20)
+#define MEM_SDADDR_CSBA (0x03FF<<10)
+#define MEM_SDADDR_CSMASK (0x03FF<<0)
+#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
-#define MEM_SDSLEEP 0xB4000030
-#define MEM_SDSMCKE 0xB4000034
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC (15<<28)
+#define MEM_SDREFCFG_TRPM (3<<26)
+#define MEM_SDREFCFG_E (1<<25)
+#define MEM_SDREFCFG_RE (0x1ffffff<<0)
+#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N) (N)
#endif
+/***********************************************************************/
+
+/*
+ * Au1550 SDRAM Register Offsets
+ */
+
+/***********************************************************************/
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0 (0x0800)
+#define MEM_SDMODE1 (0x0808)
+#define MEM_SDMODE2 (0x0810)
+#define MEM_SDADDR0 (0x0820)
+#define MEM_SDADDR1 (0x0828)
+#define MEM_SDADDR2 (0x0830)
+#define MEM_SDCONFIGA (0x0840)
+#define MEM_SDCONFIGB (0x0848)
+#define MEM_SDSTAT (0x0850)
+#define MEM_SDERRADDR (0x0858)
+#define MEM_SDSTRIDE0 (0x0860)
+#define MEM_SDSTRIDE1 (0x0868)
+#define MEM_SDSTRIDE2 (0x0870)
+#define MEM_SDWRMD0 (0x0880)
+#define MEM_SDWRMD1 (0x0888)
+#define MEM_SDWRMD2 (0x0890)
+#define MEM_SDPRECMD (0x08C0)
+#define MEM_SDAUTOREF (0x08C8)
+#define MEM_SDSREF (0x08D0)
+#define MEM_SDSLEEP MEM_SDSREF
+
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART2_PHYS_ADDR 0x11300000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1500
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x11500000
+#define MAC1_PHYS_ADDR 0x11510000
+#define MACEN_PHYS_ADDR 0x11520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define LCD_PHYS_ADDR 0x15000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBH_PHYS_ADDR 0x14020000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PE_PHYS_ADDR 0x14008000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define AES_PHYS_ADDR 0x10300000
+#define CIM_PHYS_ADDR 0x14004000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBM_PHYS_ADDR 0x14020000
+#define USBH_PHYS_ADDR 0x14020100
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define LCD_PHYS_ADDR 0x15000000
+#define SWCNT_PHYS_ADDR 0x1110010C
+#define MAEFE_PHYS_ADDR 0x14012000
+#define MAEBE_PHYS_ADDR 0x14010000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
#define MEM_STTIME0 0xB4001004
@@ -369,7 +611,7 @@
#define AU1000_MAC0_ENABLE 0xB0520000
#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1000
+#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
@@ -429,6 +671,12 @@
#define AU1500_GPIO_207 62
#define AU1500_GPIO_208_215 63
+/* shortcuts */
+#define INTA AU1000_PCI_INTA
+#define INTB AU1000_PCI_INTB
+#define INTC AU1000_PCI_INTC
+#define INTD AU1000_PCI_INTD
+
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
@@ -440,7 +688,7 @@
#define AU1500_MAC0_ENABLE 0xB1520000
#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1500
+#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
@@ -485,6 +733,22 @@
#define AU1000_GPIO_13 45
#define AU1000_GPIO_14 46
#define AU1000_GPIO_15 47
+#define AU1000_GPIO_16 48
+#define AU1000_GPIO_17 49
+#define AU1000_GPIO_18 50
+#define AU1000_GPIO_19 51
+#define AU1000_GPIO_20 52
+#define AU1000_GPIO_21 53
+#define AU1000_GPIO_22 54
+#define AU1000_GPIO_23 55
+#define AU1000_GPIO_24 56
+#define AU1000_GPIO_25 57
+#define AU1000_GPIO_26 58
+#define AU1000_GPIO_27 59
+#define AU1000_GPIO_28 60
+#define AU1000_GPIO_29 61
+#define AU1000_GPIO_30 62
+#define AU1000_GPIO_31 63
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
@@ -496,7 +760,7 @@
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
-#endif // CONFIG_SOC_AU1100
+#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
#define AU1550_UART0_INT 0
@@ -513,14 +777,14 @@
#define AU1550_PSC1_INT 11
#define AU1550_PSC2_INT 12
#define AU1550_PSC3_INT 13
-#define AU1550_TOY_INT 14
-#define AU1550_TOY_MATCH0_INT 15
-#define AU1550_TOY_MATCH1_INT 16
-#define AU1550_TOY_MATCH2_INT 17
-#define AU1550_RTC_INT 18
-#define AU1550_RTC_MATCH0_INT 19
-#define AU1550_RTC_MATCH1_INT 20
-#define AU1550_RTC_MATCH2_INT 21
+#define AU1000_TOY_INT 14
+#define AU1000_TOY_MATCH0_INT 15
+#define AU1000_TOY_MATCH1_INT 16
+#define AU1000_TOY_MATCH2_INT 17
+#define AU1000_RTC_INT 18
+#define AU1000_RTC_MATCH0_INT 19
+#define AU1000_RTC_MATCH1_INT 20
+#define AU1000_RTC_MATCH2_INT 21
#define AU1550_NAND_INT 23
#define AU1550_USB_DEV_REQ_INT 24
#define AU1550_USB_DEV_SUS_INT 25
@@ -563,6 +827,12 @@
#define AU1500_GPIO_207 62
#define AU1500_GPIO_208_218 63 // Logical or of GPIO208:218
+/* shortcuts */
+#define INTA AU1550_PCI_INTA
+#define INTB AU1550_PCI_INTB
+#define INTC AU1550_PCI_INTC
+#define INTD AU1550_PCI_INTD
+
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
#define UART3_ADDR 0xB1400000
@@ -575,7 +845,7 @@
#define AU1550_MAC0_ENABLE 0xB0520000
#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1550
+#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
#define AU1200_UART0_INT 0
@@ -592,14 +862,14 @@
#define AU1200_PSC1_INT 11
#define AU1200_AES_INT 12
#define AU1200_CAMERA_INT 13
-#define AU1200_TOY_INT 14
-#define AU1200_TOY_MATCH0_INT 15
-#define AU1200_TOY_MATCH1_INT 16
-#define AU1200_TOY_MATCH2_INT 17
-#define AU1200_RTC_INT 18
-#define AU1200_RTC_MATCH0_INT 19
-#define AU1200_RTC_MATCH1_INT 20
-#define AU1200_RTC_MATCH2_INT 21
+#define AU1000_TOY_INT 14
+#define AU1000_TOY_MATCH0_INT 15
+#define AU1000_TOY_MATCH1_INT 16
+#define AU1000_TOY_MATCH2_INT 17
+#define AU1000_RTC_INT 18
+#define AU1000_RTC_MATCH0_INT 19
+#define AU1000_RTC_MATCH1_INT 20
+#define AU1000_RTC_MATCH2_INT 21
#define AU1200_NAND_INT 23
#define AU1200_GPIO_204 24
#define AU1200_GPIO_205 25
@@ -607,6 +877,7 @@
#define AU1200_GPIO_207 27
#define AU1200_GPIO_208_215 28 // Logical OR of 208:215
#define AU1200_USB_INT 29
+#define AU1000_USB_HOST_INT AU1200_USB_INT
#define AU1200_LCD_INT 30
#define AU1200_MAE_BOTH_INT 31
#define AU1000_GPIO_0 32
@@ -645,20 +916,36 @@
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
-#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB4027ffc
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
-// these are here for prototyping on au1550 (do not exist on au1200)
-#define AU1200_ETH0_BASE 0xB0500000
-#define AU1200_ETH1_BASE 0xB0510000
-#define AU1200_MAC0_ENABLE 0xB0520000
-#define AU1200_MAC1_ENABLE 0xB0520004
-#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
#define AU1000_LAST_INTC0_INT 31
+#define AU1000_LAST_INTC1_INT 63
#define AU1000_MAX_INTR 63
-
+#define INTX 0xFF /* not valid */
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
@@ -730,6 +1017,8 @@
#define I2S_CONTROL_D (1<<1)
#define I2S_CONTROL_CE (1<<0)
+#ifndef CONFIG_SOC_AU1200
+
/* USB Host Controller */
#define USB_OHCI_LEN 0x00100000
@@ -775,6 +1064,8 @@
#define USBDEV_ENABLE (1<<1)
#define USBDEV_CE (1<<0)
+#endif /* !CONFIG_SOC_AU1200 */
+
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
@@ -1173,6 +1464,37 @@
#define SYS_PF_PSC1_S1 (1 << 1)
#define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+/* Au1200 Only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA (1<<31)
+#define SYS_PINFUNC_S0A (1<<30)
+#define SYS_PINFUNC_S1A (1<<29)
+#define SYS_PINFUNC_LP0 (1<<28)
+#define SYS_PINFUNC_LP1 (1<<27)
+#define SYS_PINFUNC_LD16 (1<<26)
+#define SYS_PINFUNC_LD8 (1<<25)
+#define SYS_PINFUNC_LD1 (1<<24)
+#define SYS_PINFUNC_LD0 (1<<23)
+#define SYS_PINFUNC_P1A (3<<21)
+#define SYS_PINFUNC_P1B (1<<20)
+#define SYS_PINFUNC_FS3 (1<<19)
+#define SYS_PINFUNC_P0A (3<<17)
+#define SYS_PINFUNC_CS (1<<16)
+#define SYS_PINFUNC_CIM (1<<15)
+#define SYS_PINFUNC_P1C (1<<14)
+#define SYS_PINFUNC_U1T (1<<12)
+#define SYS_PINFUNC_U1R (1<<11)
+#define SYS_PINFUNC_EX1 (1<<10)
+#define SYS_PINFUNC_EX0 (1<<9)
+#define SYS_PINFUNC_U0R (1<<8)
+#define SYS_PINFUNC_MC (1<<7)
+#define SYS_PINFUNC_S0B (1<<6)
+#define SYS_PINFUNC_S0C (1<<5)
+#define SYS_PINFUNC_P0B (1<<4)
+#define SYS_PINFUNC_U0T (1<<3)
+#define SYS_PINFUNC_S1B (1<<2)
+#endif
+
#define SYS_TRIOUTRD 0xB1900100
#define SYS_TRIOUTCLR 0xB1900100
#define SYS_OUTPUTRD 0xB1900108
@@ -1239,6 +1561,12 @@
#define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT)
#define SYS_CS_DI2 (1<<16)
#define SYS_CS_CI2 (1<<15)
+#ifdef CONFIG_SOC_AU1100
+ #define SYS_CS_ML_BIT 7
+ #define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT)
+ #define SYS_CS_DL (1<<6)
+ #define SYS_CS_CL (1<<5)
+#else
#define SYS_CS_MUH_BIT 12
#define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT)
#define SYS_CS_DUH (1<<11)
@@ -1247,6 +1575,7 @@
#define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT)
#define SYS_CS_DUD (1<<6)
#define SYS_CS_CUD (1<<5)
+#endif
#define SYS_CS_MIR_BIT 2
#define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT)
#define SYS_CS_DIR (1<<1)
@@ -1300,7 +1629,6 @@
#define SD1_XMIT_FIFO 0xB0680000
#define SD1_RECV_FIFO 0xB0680004
-
#if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
@@ -1363,36 +1691,77 @@
_ctl_; })
-#else /* Au1000 and Au1100 */
+#else /* Au1000 and Au1100 and Au1200 */
/* don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000;
+#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xffffffff
-#ifdef CONFIG_MIPS_PB1000
-#define PCI_IO_START 0x10000000
-#define PCI_IO_END 0x1000ffff
-#define PCI_MEM_START 0x18000000
-#define PCI_MEM_END 0x18ffffff
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 1
-#else
-/* no PCI bus controller */
#define PCI_IO_START 0
#define PCI_IO_END 0
#define PCI_MEM_START 0
#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 0
-#endif
#endif
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct
+{
+ /* 0x0000 */ u32 toytrim;
+ /* 0x0004 */ u32 toywrite;
+ /* 0x0008 */ u32 toymatch0;
+ /* 0x000C */ u32 toymatch1;
+ /* 0x0010 */ u32 toymatch2;
+ /* 0x0014 */ u32 cntrctrl;
+ /* 0x0018 */ u32 scratch0;
+ /* 0x001C */ u32 scratch1;
+ /* 0x0020 */ u32 freqctrl0;
+ /* 0x0024 */ u32 freqctrl1;
+ /* 0x0028 */ u32 clksrc;
+ /* 0x002C */ u32 pinfunc;
+ /* 0x0030 */ u32 reserved0;
+ /* 0x0034 */ u32 wakemsk;
+ /* 0x0038 */ u32 endian;
+ /* 0x003C */ u32 powerctrl;
+ /* 0x0040 */ u32 toyread;
+ /* 0x0044 */ u32 rtctrim;
+ /* 0x0048 */ u32 rtcwrite;
+ /* 0x004C */ u32 rtcmatch0;
+ /* 0x0050 */ u32 rtcmatch1;
+ /* 0x0054 */ u32 rtcmatch2;
+ /* 0x0058 */ u32 rtcread;
+ /* 0x005C */ u32 wakesrc;
+ /* 0x0060 */ u32 cpupll;
+ /* 0x0064 */ u32 auxpll;
+ /* 0x0068 */ u32 reserved1;
+ /* 0x006C */ u32 reserved2;
+ /* 0x0070 */ u32 reserved3;
+ /* 0x0074 */ u32 reserved4;
+ /* 0x0078 */ u32 slppwr;
+ /* 0x007C */ u32 sleep;
+ /* 0x0080 */ u32 reserved5[32];
+ /* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+ /* 0x0104 */ u32 reserved6;
+ /* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+ /* 0x010C */ u32 outputclr;
+ /* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+
+} AU1X00_SYS;
+
+static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
+
+#endif
/* Processor information base on prid.
* Copied from PowerPC.
*/
+#ifndef _LANGUAGE_ASSEMBLY
struct cpu_spec {
/* CPU is matched via (PRID & prid_mask) == prid_value */
unsigned int prid_mask;
@@ -1406,3 +1775,6 @@
extern struct cpu_spec cpu_specs[];
extern struct cpu_spec *cur_cpu_spec[];
#endif
+
+#endif
+
diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h
new file mode 100644
index 0000000..b7b46dd
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx.h
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1XXX_H_
+#define _AU1XXX_H_
+
+#include <linux/config.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+
+#elif defined(CONFIG_MIPS_PB1550)
+#include <asm/mach-pb1x00/pb1550.h>
+
+#elif defined(CONFIG_MIPS_PB1200)
+#include <asm/mach-pb1x00/pb1200.h>
+
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/mach-db1x00/db1200.h>
+
+#endif
+
+#endif /* _AU1XXX_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index d5eb88c..b327bcd 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -45,7 +45,7 @@
#define DDMA_GLOBAL_BASE 0xb4003000
#define DDMA_CHANNEL_BASE 0xb4002000
-typedef struct dbdma_global {
+typedef volatile struct dbdma_global {
u32 ddma_config;
u32 ddma_intstat;
u32 ddma_throttle;
@@ -62,7 +62,7 @@
/* The structure of a DMA Channel.
*/
-typedef struct au1xxx_dma_channel {
+typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
u32 ddma_statptr; /* word aligned pointer to status word */
@@ -98,7 +98,7 @@
/* "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
-typedef struct au1xxx_ddma_desc {
+typedef volatile struct au1xxx_ddma_desc {
u32 dscr_cmd0; /* See below */
u32 dscr_cmd1; /* See below */
u32 dscr_source0; /* source phys address */
@@ -107,6 +107,12 @@
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
+ /* First 32bytes are HW specific!!!
+ Lets have some SW data following.. make sure its 32bytes
+ */
+ u32 sw_status;
+ u32 sw_context;
+ u32 sw_reserved[6];
} au1x_ddma_desc_t;
#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
@@ -125,8 +131,11 @@
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
+#define SW_STATUS_INUSE (1<<0)
+
/* Command 0 device IDs.
*/
+#ifdef CONFIG_SOC_AU1550
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
#define DSCR_CMD0_UART3_TX 2
@@ -155,9 +164,45 @@
#define DSCR_CMD0_MAC0_TX 25
#define DSCR_CMD0_MAC1_RX 26
#define DSCR_CMD0_MAC1_TX 27
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+#define DSCR_CMD0_UART0_TX 0
+#define DSCR_CMD0_UART0_RX 1
+#define DSCR_CMD0_UART1_TX 2
+#define DSCR_CMD0_UART1_RX 3
+#define DSCR_CMD0_DMA_REQ0 4
+#define DSCR_CMD0_DMA_REQ1 5
+#define DSCR_CMD0_MAE_BE 6
+#define DSCR_CMD0_MAE_FE 7
+#define DSCR_CMD0_SDMS_TX0 8
+#define DSCR_CMD0_SDMS_RX0 9
+#define DSCR_CMD0_SDMS_TX1 10
+#define DSCR_CMD0_SDMS_RX1 11
+#define DSCR_CMD0_AES_TX 13
+#define DSCR_CMD0_AES_RX 12
+#define DSCR_CMD0_PSC0_TX 14
+#define DSCR_CMD0_PSC0_RX 15
+#define DSCR_CMD0_PSC1_TX 16
+#define DSCR_CMD0_PSC1_RX 17
+#define DSCR_CMD0_CIM_RXA 18
+#define DSCR_CMD0_CIM_RXB 19
+#define DSCR_CMD0_CIM_RXC 20
+#define DSCR_CMD0_MAE_BOTH 21
+#define DSCR_CMD0_LCD 22
+#define DSCR_CMD0_NAND_FLASH 23
+#define DSCR_CMD0_PSC0_SYNC 24
+#define DSCR_CMD0_PSC1_SYNC 25
+#define DSCR_CMD0_CIM_SYNC 26
+#endif /* CONFIG_SOC_AU1200 */
+
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
+/* THis macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x,d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
+
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
@@ -246,6 +291,43 @@
*/
#define NUM_DBDMA_CHANS 16
+/*
+ * Ddma API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+ spinlock_t lock;
+
+ u32 chan_flags;
+ u32 chan_index;
+ dbdev_tab_t *chan_src;
+ dbdev_tab_t *chan_dest;
+ au1x_dma_chan_t *chan_ptr;
+ au1x_ddma_desc_t *chan_desc_base;
+ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
+ void *chan_callparam;
+ void (*chan_callback)(int, void *, struct pt_regs *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE (1 << 0)
+#define DEV_FLAGS_ANYUSE (1 << 1)
+#define DEV_FLAGS_OUT (1 << 2)
+#define DEV_FLAGS_IN (1 << 3)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_SYNC (1 << 5)
+/* end Ddma API definitions */
+
/* External functions for drivers to use.
*/
/* Use this to allocate a dbdma channel. The device ids are one of the
@@ -258,18 +340,6 @@
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
-/* ACK! These should be in a board specific description file.
-*/
-#ifdef CONFIG_MIPS_PB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#endif
-#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#endif
-
-
/* Set the device width of a in/out fifo.
*/
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
@@ -280,8 +350,8 @@
/* Put buffers on source/destination descriptors.
*/
-u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
-u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
/* Get a buffer from the destination descriptor.
*/
@@ -295,5 +365,29 @@
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+
+u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ Some compatibilty macros --
+ Needed to make changes to API without breaking existing drivers
+*/
+#define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags)
+
+
+#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags)
+
+/*
+ * Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE (1<<0)
+#define DDMA_FLAGS_NOIE (1<<1)
+
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_gpio.h b/include/asm-mips/mach-au1x00/au1xxx_gpio.h
new file mode 100644
index 0000000..27911e0
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_gpio.h
@@ -0,0 +1,20 @@
+#ifndef __AU1XXX_GPIO_H
+#define __AU1XXX_GPIO_H
+
+void au1xxx_gpio1_set_inputs(void);
+void au1xxx_gpio_tristate(int signal);
+void au1xxx_gpio_write(int signal, int value);
+int au1xxx_gpio_read(int signal);
+
+typedef volatile struct
+{
+ u32 dir;
+ u32 reserved;
+ u32 output;
+ u32 pinstate;
+ u32 inten;
+ u32 enable;
+
+} AU1X00_GPIO2;
+
+#endif //__AU1XXX_GPIO_H
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 0000000..33d275c
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,301 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+#include <linux/config.h>
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ #define DMA_WAIT_TIMEOUT 100
+ #define NUM_DESCRIPTORS PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+ #define NUM_DESCRIPTORS 2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+ #define AU1XXX_ATA_RQSIZE 128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#endif
+
+#ifdef CONFIG_PM
+/*
+* This will enable the device to be powered up when write() or read()
+* is called. If this is not defined, the driver will return -EBUSY.
+*/
+#define WAKE_ON_ACCESS 1
+
+typedef struct
+{
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* USed to signaling device is stopped */
+} pm_state;
+#endif
+
+
+typedef struct
+{
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ ide_drive_t *drive;
+ u8 white_list, black_list;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct scatterlist *sg_table;
+ int sg_nents;
+ int sg_dma_direction;
+#endif
+ struct device *dev;
+ int irq;
+ u32 regbase;
+#ifdef CONFIG_PM
+ pm_state pm;
+#endif
+} _auide_hwif;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+struct drive_list_entry {
+ const char * id_model;
+ const char * id_firmware;
+};
+
+/* HD white list */
+static const struct drive_list_entry dma_white_list [] = {
+/*
+ * Hitachi
+ */
+ { "HITACHI_DK14FA-20" , "ALL" },
+ { "HTS726060M9AT00" , "ALL" },
+/*
+ * Maxtor
+ */
+ { "Maxtor 6E040L0" , "ALL" },
+ { "Maxtor 6Y080P0" , "ALL" },
+ { "Maxtor 6Y160P0" , "ALL" },
+/*
+ * Seagate
+ */
+ { "ST3120026A" , "ALL" },
+ { "ST320014A" , "ALL" },
+ { "ST94011A" , "ALL" },
+ { "ST340016A" , "ALL" },
+/*
+ * Western Digital
+ */
+ { "WDC WD400UE-00HCT0" , "ALL" },
+ { "WDC WD400JB-00JJC0" , "ALL" },
+ { NULL , NULL }
+};
+
+/* HD black list */
+static const struct drive_list_entry dma_black_list [] = {
+/*
+ * Western Digital
+ */
+ { "WDC WD100EB-00CGH0" , "ALL" },
+ { "WDC WD200BB-00AUA1" , "ALL" },
+ { "WDC AC24300L" , "ALL" },
+ { NULL , NULL }
+};
+#endif
+
+/* function prototyping */
+u8 auide_inb(unsigned long port);
+u16 auide_inw(unsigned long port);
+u32 auide_inl(unsigned long port);
+void auide_insw(unsigned long port, void *addr, u32 count);
+void auide_insl(unsigned long port, void *addr, u32 count);
+void auide_outb(u8 addr, unsigned long port);
+void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port);
+void auide_outw(u16 addr, unsigned long port);
+void auide_outl(u32 addr, unsigned long port);
+void auide_outsw(unsigned long port, void *addr, u32 count);
+void auide_outsl(unsigned long port, void *addr, u32 count);
+static void auide_tune_drive(ide_drive_t *drive, byte pio);
+static int auide_tune_chipset (ide_drive_t *drive, u8 speed);
+static int auide_ddma_init( _auide_hwif *auide );
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif);
+int __init auide_probe(void);
+
+#ifdef CONFIG_PM
+ int au1200ide_pm_callback( au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data);
+ static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_access( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev );
+#endif
+
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+
+ static int in_drive_list(struct hd_driveid *id,
+ const struct drive_list_entry *drive_table);
+ static int auide_build_sglist(ide_drive_t *drive, struct request *rq);
+ static int auide_build_dmatable(ide_drive_t *drive);
+ static int auide_dma_end(ide_drive_t *drive);
+ static void auide_dma_start(ide_drive_t *drive );
+ ide_startstop_t auide_dma_intr (ide_drive_t *drive);
+ static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command);
+ static int auide_dma_setup(ide_drive_t *drive);
+ static int auide_dma_check(ide_drive_t *drive);
+ static int auide_dma_test_irq(ide_drive_t *drive);
+ static int auide_dma_host_off(ide_drive_t *drive);
+ static int auide_dma_host_on(ide_drive_t *drive);
+ static int auide_dma_lostirq(ide_drive_t *drive);
+ static int auide_dma_on(ide_drive_t *drive);
+ static void auide_ddma_tx_callback(int irq, void *param,
+ struct pt_regs *regs);
+ static void auide_ddma_rx_callback(int irq, void *param,
+ struct pt_regs *regs);
+ static int auide_dma_off_quietly(ide_drive_t *drive);
+ static int auide_dma_timeout(ide_drive_t *drive);
+
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+/*******************************************************************************
+* PIO Mode timing calculation : *
+* *
+* Static Bus Spec ATA Spec *
+* Tcsoe = t1 *
+* Toecs = t9 *
+* Twcs = t9 *
+* Tcsh = t2i | t2 *
+* Tcsoff = t2i | t2 *
+* Twp = t2 *
+* Tcsw = t1 *
+* Tpm = 0 *
+* Ta = t1+t2 *
+*******************************************************************************/
+
+#define TCSOE_MASK (0x07<<29)
+#define TOECS_MASK (0x07<<26)
+#define TWCS_MASK (0x07<<28)
+#define TCSH_MASK (0x0F<<24)
+#define TCSOFF_MASK (0x07<<20)
+#define TWP_MASK (0x3F<<14)
+#define TCSW_MASK (0x0F<<10)
+#define TPM_MASK (0x0F<<6)
+#define TA_MASK (0x3F<<0)
+#define TS_MASK (1<<8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE (0x04<<29)
+#define SBC_IDE_PIO0_TOECS (0x01<<26)
+#define SBC_IDE_PIO0_TWCS (0x02<<28)
+#define SBC_IDE_PIO0_TCSH (0x08<<24)
+#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
+#define SBC_IDE_PIO0_TWP (0x10<<14)
+#define SBC_IDE_PIO0_TCSW (0x04<<10)
+#define SBC_IDE_PIO0_TPM (0x0<<6)
+#define SBC_IDE_PIO0_TA (0x15<<0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE (0x03<<29)
+#define SBC_IDE_PIO1_TOECS (0x01<<26)
+#define SBC_IDE_PIO1_TWCS (0x01<<28)
+#define SBC_IDE_PIO1_TCSH (0x06<<24)
+#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
+#define SBC_IDE_PIO1_TWP (0x08<<14)
+#define SBC_IDE_PIO1_TCSW (0x03<<10)
+#define SBC_IDE_PIO1_TPM (0x00<<6)
+#define SBC_IDE_PIO1_TA (0x0B<<0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE (0x05<<29)
+#define SBC_IDE_PIO2_TOECS (0x01<<26)
+#define SBC_IDE_PIO2_TWCS (0x01<<28)
+#define SBC_IDE_PIO2_TCSH (0x07<<24)
+#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
+#define SBC_IDE_PIO2_TWP (0x1F<<14)
+#define SBC_IDE_PIO2_TCSW (0x05<<10)
+#define SBC_IDE_PIO2_TPM (0x00<<6)
+#define SBC_IDE_PIO2_TA (0x22<<0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE (0x05<<29)
+#define SBC_IDE_PIO3_TOECS (0x01<<26)
+#define SBC_IDE_PIO3_TWCS (0x01<<28)
+#define SBC_IDE_PIO3_TCSH (0x0D<<24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
+#define SBC_IDE_PIO3_TWP (0x15<<14)
+#define SBC_IDE_PIO3_TCSW (0x05<<10)
+#define SBC_IDE_PIO3_TPM (0x00<<6)
+#define SBC_IDE_PIO3_TA (0x1A<<0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE (0x04<<29)
+#define SBC_IDE_PIO4_TOECS (0x01<<26)
+#define SBC_IDE_PIO4_TWCS (0x01<<28)
+#define SBC_IDE_PIO4_TCSH (0x04<<24)
+#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
+#define SBC_IDE_PIO4_TWP (0x0D<<14)
+#define SBC_IDE_PIO4_TCSW (0x03<<10)
+#define SBC_IDE_PIO4_TPM (0x00<<6)
+#define SBC_IDE_PIO4_TA (0x12<<0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
+#define SBC_IDE_MDMA0_TOECS (0x01<<26)
+#define SBC_IDE_MDMA0_TWCS (0x01<<28)
+#define SBC_IDE_MDMA0_TCSH (0x07<<24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
+#define SBC_IDE_MDMA0_TWP (0x0C<<14)
+#define SBC_IDE_MDMA0_TCSW (0x03<<10)
+#define SBC_IDE_MDMA0_TPM (0x00<<6)
+#define SBC_IDE_MDMA0_TA (0x0F<<0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
+#define SBC_IDE_MDMA1_TOECS (0x01<<26)
+#define SBC_IDE_MDMA1_TWCS (0x01<<28)
+#define SBC_IDE_MDMA1_TCSH (0x05<<24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
+#define SBC_IDE_MDMA1_TWP (0x0F<<14)
+#define SBC_IDE_MDMA1_TCSW (0x05<<10)
+#define SBC_IDE_MDMA1_TPM (0x00<<6)
+#define SBC_IDE_MDMA1_TA (0x15<<0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
+#define SBC_IDE_MDMA2_TOECS (0x01<<26)
+#define SBC_IDE_MDMA2_TWCS (0x01<<28)
+#define SBC_IDE_MDMA2_TCSH (0x04<<24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
+#define SBC_IDE_MDMA2_TWP (0x0D<<14)
+#define SBC_IDE_MDMA2_TCSW (0x04<<10)
+#define SBC_IDE_MDMA2_TPM (0x00<<6)
+#define SBC_IDE_MDMA2_TA (0x12<<0)
+
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index 283519d..8e5fb3c 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -33,6 +33,8 @@
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
+#include <linux/config.h>
+
/* The PSC base addresses. */
#ifdef CONFIG_SOC_AU1550
#define PSC0_BASE_ADDR 0xb1a00000
diff --git a/include/asm-mips/mach-au1x00/ioremap.h b/include/asm-mips/mach-au1x00/ioremap.h
new file mode 100644
index 0000000..d3ec627
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/ioremap.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-mips/mach-au1x00/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
+#else
+static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return __fixup_bigphys_addr(phys_addr, size);
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
new file mode 100644
index 0000000..5d89437
--- /dev/null
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -0,0 +1,224 @@
+/*
+ * AMD Alchemy DB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xB9800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+#define BCSR_RESETS_TV 0x0010
+/* not resets but in the same register */
+#define BCSR_RESETS_PWMR1mUX 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+
+#define BCSR_LEDS_DECIMALS 0x0003
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x19000300)
+#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
+#define AU1XXX_ATA_PHYS_LEN (0x100)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_INT DB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x20000000
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ * *example: IDE bis pos is = 64 - 64
+ ETH bit pos is = 65 - 64
+ */
+#define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
+#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0)
+#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1)
+#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2)
+#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3)
+#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4)
+#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5)
+#define DB1200_DC_INT (DB1200_INT_BEGIN + 6)
+#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7)
+#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8)
+#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9)
+#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10)
+#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11)
+#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12)
+#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13)
+
+#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+
+/* PCMCIA Db1x00 specific defines */
+
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_DB1200_H */
+
diff --git a/include/asm-mips/mach-dec/mc146818rtc.h b/include/asm-mips/mach-dec/mc146818rtc.h
index a326f45..6d37a56 100644
--- a/include/asm-mips/mach-dec/mc146818rtc.h
+++ b/include/asm-mips/mach-dec/mc146818rtc.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 1998, 2001 by Ralf Baechle
* Copyright (C) 1998 by Harald Koerfgen
- * Copyright (C) 2002 Maciej W. Rozycki
+ * Copyright (C) 2002, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -14,23 +14,18 @@
#define __ASM_MIPS_DEC_RTC_DEC_H
#include <linux/types.h>
-
#include <asm/addrspace.h>
+#include <asm/dec/system.h>
extern volatile u8 *dec_rtc_base;
-extern unsigned long dec_kn_slot_size;
-#define RTC_PORT(x) CPHYSADDR(dec_rtc_base)
+#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base)
#define RTC_IO_EXTENT dec_kn_slot_size
#define RTC_IOMAPPED 0
#undef RTC_IRQ
#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */
-#include <linux/mc146818rtc.h>
-#include <linux/module.h>
-#include <linux/types.h>
-
static inline unsigned char CMOS_READ(unsigned long addr)
{
return dec_rtc_base[addr * 4];
diff --git a/include/asm-mips/mach-generic/cpu-feature-overrides.h b/include/asm-mips/mach-generic/cpu-feature-overrides.h
index 0aecfd0..7c185bb 100644
--- a/include/asm-mips/mach-generic/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-generic/cpu-feature-overrides.h
@@ -8,6 +8,6 @@
#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
-/* Intensionally empty file ... */
+/* Intentionally empty file ... */
#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index cb2edd0..9610069 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -18,6 +18,7 @@
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/stddef.h>
+#include <asm/processor.h>
#ifndef MAX_HWIFS
# ifdef CONFIG_BLK_DEV_IDEPCI
@@ -104,15 +105,71 @@
/* MIPS port and memory-mapped I/O string operations. */
-#define __ide_insw insw
-#define __ide_insl insl
-#define __ide_outsw outsw
-#define __ide_outsl outsl
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+ if (cpu_has_dc_aliases) {
+ unsigned long end = addr + size;
+ for (; addr < end; addr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(addr));
+ }
+}
-#define __ide_mm_insw readsw
-#define __ide_mm_insl readsl
-#define __ide_mm_outsw writesw
-#define __ide_mm_outsl writesl
+static inline void __ide_insw(unsigned long port, void *addr,
+ unsigned int count)
+{
+ insw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+ insl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+ readsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+ readsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+ writesw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+ writesl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+/* ide_insw calls insw, not __ide_insw. Why? */
+#undef insw
+#undef insl
+#define insw(port, addr, count) __ide_insw(port, addr, count)
+#define insl(port, addr, count) __ide_insl(port, addr, count)
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/mach-generic/ioremap.h b/include/asm-mips/mach-generic/ioremap.h
new file mode 100644
index 0000000..9b64ff6
--- /dev/null
+++ b/include/asm-mips/mach-generic/ioremap.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-mips/mach-generic/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_GENERIC_IOREMAP_H
+#define __ASM_MACH_GENERIC_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+
+#endif /* __ASM_MACH_GENERIC_IOREMAP_H */
diff --git a/include/asm-mips/mach-generic/kernel-entry-init.h b/include/asm-mips/mach-generic/kernel-entry-init.h
new file mode 100644
index 0000000..7e66505
--- /dev/null
+++ b/include/asm-mips/mach-generic/kernel-entry-init.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+
+/* Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+.macro kernel_entry_setup
+.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ .endm
+
+
+#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff --git a/include/asm-mips/mach-generic/kmalloc.h b/include/asm-mips/mach-generic/kmalloc.h
new file mode 100644
index 0000000..373d66d
--- /dev/null
+++ b/include/asm-mips/mach-generic/kmalloc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_GENERIC_KMALLOC_H
+#define __ASM_MACH_GENERIC_KMALLOC_H
+
+#include <linux/config.h>
+
+#ifndef CONFIG_DMA_COHERENT
+/*
+ * Total overkill for most systems but need as a safe default.
+ */
+#define ARCH_KMALLOC_MINALIGN 128
+#endif
+
+#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
diff --git a/include/asm-mips/mach-generic/spaces.h b/include/asm-mips/mach-generic/spaces.h
index 5a2c1ef..b849d8d 100644
--- a/include/asm-mips/mach-generic/spaces.h
+++ b/include/asm-mips/mach-generic/spaces.h
@@ -55,13 +55,13 @@
#endif
#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE 0x9800000000000000
+#define CAC_BASE 0x9800000000000000UL
#else
-#define CAC_BASE 0xa800000000000000
+#define CAC_BASE 0xa800000000000000UL
#endif
-#define IO_BASE 0x9000000000000000
-#define UNCAC_BASE 0x9000000000000000
-#define MAP_BASE 0xc000000000000000
+#define IO_BASE 0x9000000000000000UL
+#define UNCAC_BASE 0x9000000000000000UL
+#define MAP_BASE 0xc000000000000000UL
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ip22/cpu-feature-overrides.h b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
index 3c8896d..ab97146 100644
--- a/include/asm-mips/mach-ip22/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
@@ -11,6 +11,12 @@
/*
* IP22 with a variety of processors so we can't use defaults for everything.
*/
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4kcache 1
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
#define cpu_has_mips16 0
#define cpu_has_divec 0
#define cpu_has_cache_cdex_p 1
@@ -23,6 +29,8 @@
#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-ip22/spaces.h b/include/asm-mips/mach-ip22/spaces.h
index e96166f..8385f71 100644
--- a/include/asm-mips/mach-ip22/spaces.h
+++ b/include/asm-mips/mach-ip22/spaces.h
@@ -44,7 +44,7 @@
#define CAC_BASE 0xffffffff80000000
#define IO_BASE 0xffffffffa0000000
#define UNCAC_BASE 0xffffffffa0000000
-#define MAP_BASE 0xffffffffc0000000
+#define MAP_BASE 0xc000000000000000
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ip27/cpu-feature-overrides.h b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
index fe96d73..4c8a900 100644
--- a/include/asm-mips/mach-ip27/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 1
#define cpu_has_nofpuex 0
diff --git a/include/asm-mips/mach-ip27/kernel-entry-init.h b/include/asm-mips/mach-ip27/kernel-entry-init.h
new file mode 100644
index 0000000..c1a1031
--- /dev/null
+++ b/include/asm-mips/mach-ip27/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2005 Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H
+#define __ASM_MACH_IP27_KERNEL_ENTRY_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/klkernvars.h>
+
+/*
+ * Returns the local nasid into res.
+ */
+ .macro GET_NASID_ASM res
+ dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+ ld \res, (\res)
+ and \res, NSRI_NODEID_MASK
+ dsrl \res, NSRI_NODEID_SHFT
+ .endm
+
+/*
+ * Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+ .macro kernel_entry_setup
+ GET_NASID_ASM t1
+ move t2, t1 # text and data are here
+ MAPPED_KERNEL_SETUP_TLB
+ .endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ GET_NASID_ASM t1
+ dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
+ KLDIR_OFF_POINTER + CAC_BASE
+ dsll t1, NASID_SHFT
+ or t0, t0, t1
+ ld t0, 0(t0) # t0 points to kern_vars struct
+ lh t1, KV_RO_NASID_OFFSET(t0)
+ lh t2, KV_RW_NASID_OFFSET(t0)
+ MAPPED_KERNEL_SETUP_TLB
+ ARC64_TWIDDLE_PC
+ .endm
+
+#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */
diff --git a/include/asm-mips/mach-ip27/kmalloc.h b/include/asm-mips/mach-ip27/kmalloc.h
new file mode 100644
index 0000000..426bd04
--- /dev/null
+++ b/include/asm-mips/mach-ip27/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_IP27_KMALLOC_H
+#define __ASM_MACH_IP27_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff --git a/include/asm-mips/mach-ip27/mmzone.h b/include/asm-mips/mach-ip27/mmzone.h
index d3f5663..986a3b9 100644
--- a/include/asm-mips/mach-ip27/mmzone.h
+++ b/include/asm-mips/mach-ip27/mmzone.h
@@ -10,7 +10,6 @@
#define LEVELS_PER_SLICE 128
struct slice_data {
- unsigned long irq_alloc_mask[2];
unsigned long irq_enable_mask[2];
int level_to_irq[LEVELS_PER_SLICE];
};
@@ -20,6 +19,7 @@
DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
cpumask_t h_cpus;
unsigned long slice_map;
+ unsigned long irq_alloc_mask[2];
struct slice_data slice[2];
};
diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h
index e3b3fe3..45e6178 100644
--- a/include/asm-mips/mach-ip27/spaces.h
+++ b/include/asm-mips/mach-ip27/spaces.h
@@ -20,6 +20,7 @@
#define IO_BASE 0x9200000000000000
#define MSPEC_BASE 0x9400000000000000
#define UNCAC_BASE 0x9600000000000000
+#define MAP_BASE 0xc000000000000000
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h
index a70a812..82141c7 100644
--- a/include/asm-mips/mach-ip27/topology.h
+++ b/include/asm-mips/mach-ip27/topology.h
@@ -9,6 +9,9 @@
#define parent_node(node) (node)
#define node_to_cpumask(node) (hub_data(node)->h_cpus)
#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
#define pcibus_to_cpumask(bus) (cpu_online_map)
extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
index 0471397..ab37fc1 100644
--- a/include/asm-mips/mach-ip32/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
@@ -37,5 +37,6 @@
#define cpu_has_ejtag 0
#define cpu_has_vtag_icache 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ip32/kmalloc.h b/include/asm-mips/mach-ip32/kmalloc.h
new file mode 100644
index 0000000..9d2d4d9
--- /dev/null
+++ b/include/asm-mips/mach-ip32/kmalloc.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_MACH_IP32_KMALLOC_H
+#define __ASM_MACH_IP32_KMALLOC_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_CPU_R5000) || defined (CONFIG_CPU_RM7000)
+#define ARCH_KMALLOC_MINALIGN 32
+#else
+#define ARCH_KMALLOC_MINALIGN 128
+#endif
+
+#endif /* __ASM_MACH_IP32_KMALLOC_H */
diff --git a/include/asm-mips/mach-ip32/spaces.h b/include/asm-mips/mach-ip32/spaces.h
index c7839f8..44abe5c 100644
--- a/include/asm-mips/mach-ip32/spaces.h
+++ b/include/asm-mips/mach-ip32/spaces.h
@@ -19,10 +19,10 @@
#define HIGHMEM_START (1UL << 59UL)
#endif
-#define CAC_BASE 0x9800000000000000
-#define IO_BASE 0x9000000000000000
-#define UNCAC_BASE 0x9000000000000000
-#define MAP_BASE 0xc000000000000000
+#define CAC_BASE 0x9800000000000000UL
+#define IO_BASE 0x9000000000000000UL
+#define UNCAC_BASE 0x9000000000000000UL
+#define MAP_BASE 0xc000000000000000UL
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h
index ca57e7d..a0fde40 100644
--- a/include/asm-mips/mach-ja/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ja/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
@@ -36,10 +37,4 @@
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
-/*
- * On the RM9000 we need to ensure that I-cache lines being fetches only
- * contain valid instructions are funny things will happen.
- */
-#define PLAT_TRAMPOLINE_STUFF_LINE 32UL
-
#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-mips/cpu-feature-overrides.h
index 6f51be5..9f92aed 100644
--- a/include/asm-mips/mach-mips/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-mips/cpu-feature-overrides.h
@@ -17,7 +17,7 @@
#ifdef CONFIG_CPU_MIPS32
#define cpu_has_tlb 1
#define cpu_has_4kex 1
-#define cpu_has_4ktlb 1
+#define cpu_has_4kcache 1
/* #define cpu_has_fpu ? */
/* #define cpu_has_32fpr ? */
#define cpu_has_counter 1
@@ -37,12 +37,13 @@
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
/* #define cpu_has_subset_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
#endif
#ifdef CONFIG_CPU_MIPS64
#define cpu_has_tlb 1
#define cpu_has_4kex 1
-#define cpu_has_4ktlb 1
+#define cpu_has_4kcache 1
/* #define cpu_has_fpu ? */
/* #define cpu_has_32fpr ? */
#define cpu_has_counter 1
@@ -62,6 +63,7 @@
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
/* #define cpu_has_subset_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
#endif
#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-mips/irq.h b/include/asm-mips/mach-mips/irq.h
new file mode 100644
index 0000000..f857969
--- /dev/null
+++ b/include/asm-mips/mach-mips/irq.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_MACH_MIPS_IRQ_H
+#define __ASM_MACH_MIPS_IRQ_H
+
+#include <linux/config.h>
+
+#define NR_IRQS 256
+
+#ifdef CONFIG_SMP
+
+#define ARCH_HAS_IRQ_PER_CPU
+
+#endif
+
+#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
index 7473512..825c5f6 100644
--- a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
@@ -28,6 +28,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
@@ -39,10 +40,4 @@
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
-/*
- * On the RM9000 we need to ensure that I-cache lines being fetches only
- * contain valid instructions are funny things will happen.
- */
-#define PLAT_TRAMPOLINE_STUFF_LINE 32UL
-
#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
new file mode 100644
index 0000000..9a3088b
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -0,0 +1,252 @@
+/*
+ * AMD Alchemy PB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+#define BCSR_RESETS_SD1MUX 0x8000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+#define BCSR_BOARD_SD1PWR 0x0080
+
+#define BCSR_LEDS_DECIMALS 0x00FF
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_VDDI 0x001F
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+#define BCSR_INT_SD1INSERT 0x4000
+#define BCSR_INT_SD1EJECT 0x8000
+
+/* PCMCIA Db1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300)
+#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
+#define AU1XXX_ATA_PHYS_LEN (0x100)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_INT PB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x1C000000
+
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT 0
+#define NAND_T_PUL_SHIFT 4
+#define NAND_T_SU_SHIFT 8
+#define NAND_T_WH_SHIFT 12
+
+#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ * *example: IDE bis pos is = 64 - 64
+ ETH bit pos is = 65 - 64
+ */
+#define PB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
+#define PB1200_IDE_INT (PB1200_INT_BEGIN + 0)
+#define PB1200_ETH_INT (PB1200_INT_BEGIN + 1)
+#define PB1200_PC0_INT (PB1200_INT_BEGIN + 2)
+#define PB1200_PC0_STSCHG_INT (PB1200_INT_BEGIN + 3)
+#define PB1200_PC1_INT (PB1200_INT_BEGIN + 4)
+#define PB1200_PC1_STSCHG_INT (PB1200_INT_BEGIN + 5)
+#define PB1200_DC_INT (PB1200_INT_BEGIN + 6)
+#define PB1200_FLASHBUSY_INT (PB1200_INT_BEGIN + 7)
+#define PB1200_PC0_INSERT_INT (PB1200_INT_BEGIN + 8)
+#define PB1200_PC0_EJECT_INT (PB1200_INT_BEGIN + 9)
+#define PB1200_PC1_INSERT_INT (PB1200_INT_BEGIN + 10)
+#define PB1200_PC1_EJECT_INT (PB1200_INT_BEGIN + 11)
+#define PB1200_SD0_INSERT_INT (PB1200_INT_BEGIN + 12)
+#define PB1200_SD0_EJECT_INT (PB1200_INT_BEGIN + 13)
+#define PB1200_SD1_INSERT_INT (PB1200_INT_BEGIN + 14)
+#define PB1200_SD1_EJECT_INT (PB1200_INT_BEGIN + 15)
+
+#define PB1200_INT_END (PB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_PB1200_H */
+
diff --git a/include/asm-mips/mach-pnx8550/cm.h b/include/asm-mips/mach-pnx8550/cm.h
new file mode 100644
index 0000000..bb0a56c
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/cm.h
@@ -0,0 +1,43 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Clock module specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_CM_H
+#define __PNX8550_CM_H
+
+#define PNX8550_CM_BASE 0xBBE47000
+
+#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
+#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
+#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
+#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
+
+// Table not complete.....
+
+#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000
+#define PNX8550_CM_PLL_LOCK_MASK 0x40000000
+#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
+#define PNX8550_CM_PLL_N_MASK 0x01ff0000
+#define PNX8550_CM_PLL_M_MASK 0x00003f00
+#define PNX8550_CM_PLL_P_MASK 0x0000000c
+#define PNX8550_CM_PLL_PD_MASK 0x00000002
+
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/glb.h b/include/asm-mips/mach-pnx8550/glb.h
new file mode 100644
index 0000000..07aa85e
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/glb.h
@@ -0,0 +1,86 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PNX8550 global definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_GLB_H
+#define __PNX8550_GLB_H
+
+#define PNX8550_GLB1_BASE 0xBBE63000
+#define PNX8550_GLB2_BASE 0xBBE4d000
+#define PNX8550_RESET_BASE 0xBBE60000
+
+/* PCI Inta Output Enable Registers */
+#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
+
+/* Bit 1:Enable DAC Powerdown
+ 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+*/
+#define PNX8550_GLB_DAC_PD 0x2
+/* Bit 0:Enable of PCI inta output
+ 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+*/
+#define PNX8550_GLB_ENABLE_INTA_O 0x1
+
+/* PCI Direct Mappings */
+#define PNX8550_PCIMEM 0x12000000
+#define PNX8550_PCIMEM_SIZE 0x08000000
+#define PNX8550_PCIIO 0x1c000000
+#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */
+
+#define PNX8550_PORT_BASE KSEG1
+
+// GPIO def
+#define PNX8550_GPIO_BASE 0x1Be00000
+
+#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500)
+#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004)
+#define PNX8550_GPIO_MC_31_BIT 30
+#define PNX8550_GPIO_MC_30_BIT 28
+#define PNX8550_GPIO_MC_29_BIT 26
+#define PNX8550_GPIO_MC_28_BIT 24
+#define PNX8550_GPIO_MC_27_BIT 22
+#define PNX8550_GPIO_MC_26_BIT 20
+#define PNX8550_GPIO_MC_25_BIT 18
+#define PNX8550_GPIO_MC_24_BIT 16
+#define PNX8550_GPIO_MC_23_BIT 14
+#define PNX8550_GPIO_MC_22_BIT 12
+#define PNX8550_GPIO_MC_21_BIT 10
+#define PNX8550_GPIO_MC_20_BIT 8
+#define PNX8550_GPIO_MC_19_BIT 6
+#define PNX8550_GPIO_MC_18_BIT 4
+#define PNX8550_GPIO_MC_17_BIT 2
+#define PNX8550_GPIO_MC_16_BIT 0
+
+#define PNX8550_GPIO_MODE_PRIMOP 0x1
+#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
+#define PNX8550_GPIO_MODE_OPENDR 0x3
+
+// RESET module
+#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
+#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
+#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
+
+#define PNX8550_RST_REL_MIPS_RST_N 0x8
+#define PNX8550_RST_DO_SW_RST 0x4
+#define PNX8550_RST_REL_SYS_RST_OUT 0x2
+#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
+#endif
diff --git a/include/asm-mips/mach-pnx8550/int.h b/include/asm-mips/mach-pnx8550/int.h
new file mode 100644
index 0000000..0e0668b
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/int.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Interrupt specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_INT_H
+#define __PNX8550_INT_H
+
+#define PNX8550_GIC_BASE 0xBBE3E000
+
+#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
+#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
+#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
+#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
+#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
+#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
+#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
+#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
+#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
+#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
+
+// cp0 is two software + six hw exceptions
+#define PNX8550_INT_CP0_TOTINT 8
+#define PNX8550_INT_CP0_MIN 0
+#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
+
+#define MIPS_CPU_GIC_IRQ 2
+#define MIPS_CPU_TIMER_IRQ 7
+
+// GIC are 71 exceptions connected to cp0's first hardware exception
+#define PNX8550_INT_GIC_TOTINT 71
+#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1)
+#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
+
+#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0)
+#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1)
+#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
+#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
+#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4)
+#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5)
+#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6)
+#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7)
+#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8)
+#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9)
+
+#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10)
+#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11)
+#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12)
+#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13)
+#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14)
+#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15)
+#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16)
+#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17)
+#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18)
+#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19)
+
+#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20)
+#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21)
+#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22)
+#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23)
+#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24)
+#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25)
+#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26)
+#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27)
+#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28)
+#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29)
+
+#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30)
+#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31)
+#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32)
+#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33)
+#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34)
+#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35)
+#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36)
+#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37)
+#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38)
+#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39)
+
+#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40)
+#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41)
+#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42)
+#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43)
+#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44)
+#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45)
+#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46)
+#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47)
+#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48)
+#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49)
+
+#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50)
+#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51)
+#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
+#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53)
+#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54)
+#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55)
+#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56)
+#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57)
+#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58)
+#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59)
+
+#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60)
+#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61)
+#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62)
+#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63)
+#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64)
+#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65)
+#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66)
+#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67)
+#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68)
+#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69)
+
+#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70)
+
+// Timer are 3 exceptions connected to cp0's 7th hardware exception
+#define PNX8550_INT_TIMER_TOTINT 3
+#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1)
+#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
+
+#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0)
+#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1)
+#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2)
+#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/kernel-entry-init.h b/include/asm-mips/mach-pnx8550/kernel-entry-init.h
new file mode 100644
index 0000000..57102fa
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/kernel-entry-init.h
@@ -0,0 +1,262 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ */
+#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_KERNEL_ENTRY_INIT_H
+
+#include <asm/cacheops.h>
+#include <asm/addrspace.h>
+
+#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */
+#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
+#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */
+#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */
+#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */
+
+#define ICACHE_SET_COUNT 256 /* Instruction cache set count */
+#define DCACHE_SET_COUNT 128 /* Data cache set count */
+
+#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
+#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
+
+ .macro kernel_entry_setup
+ .set push
+ .set noreorder
+ /*
+ * PNX8550 entry point, when running a non compressed
+ * kernel. When loading a zImage, the head.S code in
+ * arch/mips/zboot/pnx8550 will init the caches and,
+ * decompress the kernel, and branch to kernel_entry.
+ */
+cache_begin: li t0, (1<<28)
+ mtc0 t0, CP0_STATUS /* cp0 usable */
+ HAZARD_CP0
+
+ mtc0 zero, CP0_CAUSE
+ HAZARD_CP0
+
+
+ /* Set static virtual to phys address translation and TLB disabled */
+ mfc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ and t0,~((1<<19) | (1<<20)) /* TLB/MAP cleared */
+ mtc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
+
+ init_icache
+ nop
+ init_dcache
+ nop
+
+ cachePr4450ICReset
+ nop
+
+ cachePr4450DCReset
+ nop
+
+ /* read ConfigPR into t0 */
+ mfc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ /* enable the TLB */
+ or t0, (1<<19)
+
+ /* disable the ICACHE: at least 10x slower */
+ /* or t0, (1<<26) */
+
+ /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */
+ /* or t0, (1<<27) */
+
+ and t0, CO_CONFIGPR_VALID
+
+ /* enable TLB. */
+ mtc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+cache_end:
+ /* Setup CMEM_0 to MMIO address space, 2MB */
+ lui t0, 0x1BE0
+ addi t0, t0, 0x3
+ mtc0 $8, $22, 4
+ nop
+
+ /* Setup CMEM_1, 128MB */
+ lui t0, 0x1000
+ addi t0, t0, 0xf
+ mtc0 $8, $22, 5
+ nop
+
+
+ /* Setup CMEM_2, 32MB */
+ lui t0, 0x1C00
+ addi t0, t0, 0xb
+ mtc0 $8, $22, 6
+ nop
+
+ /* Setup CMEM_3, 0MB */
+ lui t0, 0x0
+ addi t0, t0, 0x0
+ mtc0 $8, $22, 7
+ nop
+
+ /* Enable cache */
+ mfc0 t0, CP0_CONFIG
+ HAZARD_CP0
+ and t0, t0, 0xFFFFFFF8
+ or t0, t0, 3
+ mtc0 t0, CP0_CONFIG
+ HAZARD_CP0
+ .set pop
+ .endm
+
+ .macro init_icache
+ .set push
+ .set noreorder
+
+ /* Get Cache Configuration */
+ mfc0 t3, CP0_CONFIG, 1
+ HAZARD_CP0
+
+ /* get cache Line size */
+
+ srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */
+ andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */
+ beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
+ nop
+ addiu t0, t1, 1
+ ori t1, zero, 1
+ sllv t1, t1, t0
+
+ /* get max cache Index */
+ srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */
+ andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
+ addiu t0, t2, 6
+ ori t2, zero, 1
+ sllv t2, t2, t0
+
+ /* get max cache way */
+ srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */
+ andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
+ addiu t3, t3, 1
+
+ /* total no of cache lines */
+ multu t2, t3 /* max index * max way */
+ mflo t2
+ addiu t2, t2, -1
+
+ move t0, zero
+pr4450_next_instruction_cache_set:
+ cache Index_Invalidate_I, 0(t0)
+ addu t0, t0, t1 /* add bytes in a line */
+ bne t2, zero, pr4450_next_instruction_cache_set
+ addiu t2, t2, -1 /* reduce no of lines to invalidate by one */
+pr4450_instr_cache_invalidated:
+ .set pop
+ .endm
+
+ .macro init_dcache
+ .set push
+ .set noreorder
+ move t1, zero
+
+ /* Store Tag Information */
+ mtc0 zero, CP0_TAGLO, 0
+ HAZARD_CP0
+
+ mtc0 zero, CP0_TAGHI, 0
+ HAZARD_CP0
+
+ /* Cache size is 16384 = 512 lines x 32 bytes per line */
+ or t2, zero, (128*4)-1 /* 512 lines */
+ /* Invalidate all lines */
+2:
+ cache Index_Store_Tag_D, 0(t1)
+ addiu t2, t2, -1
+ bne t2, zero, 2b
+ addiu t1, t1, 32 /* 32 bytes in a line */
+ .set pop
+ .endm
+
+ .macro cachePr4450ICReset
+ .set push
+ .set noreorder
+
+ /* Save CP0 status reg on entry; */
+ /* disable interrupts during cache reset */
+ mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */
+ HAZARD_CP0
+
+ mtc0 zero, CP0_STATUS /* disable CPU interrupts */
+ HAZARD_CP0
+
+ or t1, zero, zero /* T1 = starting cache index (0) */
+ ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
+
+ icache_invd_loop:
+ /* 9 == register t1 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+ (0 * ICACHE_SET_SIZE)) /* invalidate inst cache WAY0 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+ (1 * ICACHE_SET_SIZE)) /* invalidate inst cache WAY1 */
+
+ addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */
+ bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
+ addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */
+
+ /* Initialize the latches in the instruction cache tag */
+ /* that drive the way selection tri-state bus drivers, by doing a */
+ /* dummy load while the instruction cache is still disabled. */
+ /* TODO: Is this needed ? */
+ la t1, KSEG0 /* T1 = cached memory base address */
+ lw zero, 0x0000(t1) /* (dummy read of first memory word) */
+
+ mtc0 t0, CP0_STATUS /* restore interrupt status on entry */
+ HAZARD_CP0
+ .set pop
+ .endm
+
+ .macro cachePr4450DCReset
+ .set push
+ .set noreorder
+ mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */
+ HAZARD_CP0
+ mtc0 zero, CP0_STATUS /* disable CPU interrupts */
+ HAZARD_CP0
+
+ /* Writeback/invalidate entire data cache sets/ways/lines */
+ or t1, zero, zero /* T1 = starting cache index (0) */
+ ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
+
+ dcache_wbinvd_loop:
+ /* 9 == register t1 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (0 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY0 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (1 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY1 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (2 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY2 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (3 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY3 */
+
+ addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */
+ bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
+ addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */
+
+ /* Initialize the latches in the data cache tag that drive the way
+ selection tri-state bus drivers, by doing a dummy load while the
+ data cache is still in the disabled mode. TODO: Is this needed ? */
+ la t1, KSEG0 /* T1 = cached memory base address */
+ lw zero, 0x0000(t1) /* (dummy read of first memory word) */
+
+ mtc0 t0, CP0_STATUS /* restore interrupt status on entry */
+ HAZARD_CP0
+ .set pop
+ .endm
+
+#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/include/asm-mips/mach-pnx8550/nand.h b/include/asm-mips/mach-pnx8550/nand.h
new file mode 100644
index 0000000..aefbc51
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/nand.h
@@ -0,0 +1,121 @@
+#ifndef __PNX8550_NAND_H
+#define __PNX8550_NAND_H
+
+#define PNX8550_NAND_BASE_ADDR 0x10000000
+#define PNX8550_PCIXIO_BASE 0xBBE40000
+
+#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
+#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
+#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
+#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
+#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
+#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
+#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
+#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
+#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
+#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
+#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
+#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
+#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
+#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
+#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
+#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
+
+#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000
+#define PNX8550_XIO_SEL0_USE_ACK 0x00400000
+#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000
+#define PNX8550_XIO_SEL0_REN_LOW 0x00040000
+#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000
+#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000
+#define PNX8550_XIO_SEL0_WAIT 0x00000200
+#define PNX8550_XIO_SEL0_OFFSET 0x00000020
+#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000
+#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008
+#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010
+#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018
+#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000
+#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002
+#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004
+#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006
+#define PNX8550_XIO_SEL0_ENAB 0x00000001
+
+#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \
+ (PNX8550_XIO_SEL0_REN_HIGH*0)| \
+ (PNX8550_XIO_SEL0_REN_LOW*2) | \
+ (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
+ (PNX8550_XIO_SEL0_WEN_LOW*2) | \
+ (PNX8550_XIO_SEL0_WAIT*4) | \
+ (PNX8550_XIO_SEL0_OFFSET*0) | \
+ (PNX8550_XIO_SEL0_TYPE_NAND) | \
+ (PNX8550_XIO_SEL0_SIZE_32MB) | \
+ (PNX8550_XIO_SEL0_ENAB))
+
+#define PNX8550_GPXIO_PENDING 0x00000200
+#define PNX8550_GPXIO_DONE 0x00000100
+#define PNX8550_GPXIO_CLR_DONE 0x00000080
+#define PNX8550_GPXIO_INIT 0x00000040
+#define PNX8550_GPXIO_READ_CMD 0x00000010
+#define PNX8550_GPXIO_BEN 0x0000000F
+
+#define PNX8550_XIO_FLASH_64MB 0x00200000
+#define PNX8550_XIO_FLASH_INC_DATA 0x00100000
+#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000
+#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000
+#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000
+#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000
+#define PNX8550_XIO_FLASH_ADR_PH 0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000
+#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000
+#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000
+#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00)
+#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF)
+
+#define PNX8550_XIO_INT_ACK 0x00004000
+#define PNX8550_XIO_INT_COMPL 0x00002000
+#define PNX8550_XIO_INT_NONSUP 0x00000200
+#define PNX8550_XIO_INT_ABORT 0x00000004
+
+#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
+#define PNX8550_DMA_CTRL_SND2XIO 0x00000200
+#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100
+#define PNX8550_DMA_CTRL_BURST_8 0x00000000
+#define PNX8550_DMA_CTRL_BURST_16 0x00000020
+#define PNX8550_DMA_CTRL_BURST_32 0x00000040
+#define PNX8550_DMA_CTRL_BURST_64 0x00000060
+#define PNX8550_DMA_CTRL_BURST_128 0x00000080
+#define PNX8550_DMA_CTRL_BURST_256 0x000000A0
+#define PNX8550_DMA_CTRL_BURST_512 0x000000C0
+#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
+#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010
+#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F
+
+/* see PCI system arch, page 100 for the full list: */
+#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006
+#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007
+
+#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_STAT_PERR5 (1<<5)
+#define PNX8550_DMA_INT_STAT_PERR4 (1<<4)
+#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1)
+
+#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_EN_PERR5 (1<<5)
+#define PNX8550_DMA_INT_EN_PERR4 (1<<4)
+#define PNX8550_DMA_INT_EN_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_EN_T_ABORT (1<<1)
+
+#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_CLR_PERR5 (1<<5)
+#define PNX8550_DMA_INT_CLR_PERR4 (1<<4)
+#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1)
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/pci.h b/include/asm-mips/mach-pnx8550/pci.h
new file mode 100644
index 0000000..b921508
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/pci.h
@@ -0,0 +1,185 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_PCI_H
+#define __PNX8550_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define PCI_CMD_IOR 0x20
+#define PCI_CMD_IOW 0x30
+#define PCI_CMD_CONFIG_READ 0xa0
+#define PCI_CMD_CONFIG_WRITE 0xb0
+
+#define PCI_IO_TIMEOUT 1000
+#define PCI_IO_RETRY 5
+/* Timeout for IO and CFG accesses.
+ This is in 1/1024 th of a jiffie(=10ms)
+ i.e. approx 10us */
+#define PCI_IO_JIFFIES_TIMEOUT 40
+#define PCI_IO_JIFFIES_SHIFT 10
+
+#define PCI_BYTE_ENABLE_MASK 0x0000000f
+#define PCI_CFG_BUS_SHIFT 16
+#define PCI_CFG_FUNC_SHIFT 8
+#define PCI_CFG_REG_SHIFT 2
+
+#define PCI_BASE 0x1be00000
+#define PCI_SETUP 0x00040010
+#define PCI_DIS_REQGNT (1<<30)
+#define PCI_DIS_REQGNTA (1<<29)
+#define PCI_DIS_REQGNTB (1<<28)
+#define PCI_D2_SUPPORT (1<<27)
+#define PCI_D1_SUPPORT (1<<26)
+#define PCI_EN_TA (1<<24)
+#define PCI_EN_PCI2MMI (1<<23)
+#define PCI_EN_XIO (1<<22)
+#define PCI_BASE18_PREF (1<<21)
+#define SIZE_16M 0x3
+#define SIZE_32M 0x4
+#define SIZE_64M 0x5
+#define SIZE_128M 0x6
+#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
+#define PCI_SETUP_BASE18_EN (1<<17)
+#define PCI_SETUP_BASE14_PREF (1<<16)
+#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
+#define PCI_SETUP_BASE14_EN (1<<11)
+#define PCI_SETUP_BASE10_PREF (1<<10)
+#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
+#define PCI_SETUP_CFGMANAGE_EN (1<<1)
+#define PCI_SETUP_PCIARB_EN (1<<0)
+
+#define PCI_CTRL 0x040014
+#define PCI_SWPB_DCS_PCI (1<<16)
+#define PCI_SWPB_PCI_PCI (1<<15)
+#define PCI_SWPB_PCI_DCS (1<<14)
+#define PCI_REG_WR_POST (1<<13)
+#define PCI_XIO_WR_POST (1<<12)
+#define PCI_PCI2_WR_POST (1<<13)
+#define PCI_PCI1_WR_POST (1<<12)
+#define PCI_SERR_SEEN (1<<11)
+#define PCI_B10_SPEC_RD (1<<6)
+#define PCI_B14_SPEC_RD (1<<5)
+#define PCI_B18_SPEC_RD (1<<4)
+#define PCI_B10_NOSUBWORD (1<<3)
+#define PCI_B14_NOSUBWORD (1<<2)
+#define PCI_B18_NOSUBWORD (1<<1)
+#define PCI_RETRY_TMREN (1<<0)
+
+#define PCI_BASE1_LO 0x040018
+#define PCI_BASE1_HI 0x04001C
+#define PCI_BASE2_LO 0x040020
+#define PCI_BASE2_HI 0x040024
+#define PCI_RDLIFETIM 0x040028
+#define PCI_GPPM_ADDR 0x04002C
+#define PCI_GPPM_WDAT 0x040030
+#define PCI_GPPM_RDAT 0x040034
+#define PCI_GPPM_CTRL 0x040038
+#define GPPM_DONE (1<<10)
+#define INIT_PCI_CYCLE (1<<9)
+#define GPPM_CMD(X) (((X)&0xf)<<4)
+#define GPPM_BYTEEN(X) ((X)&0xf)
+#define PCI_UNLOCKREG 0x04003C
+#define UNLOCK_SSID(X) (((X)&0xff)<<8)
+#define UNLOCK_SETUP(X) (((X)&0xff)<<0)
+#define UNLOCK_MAGIC 0xCA
+#define PCI_DEV_VEND_ID 0x040040
+#define DEVICE_ID(X) (((X)>>16)&0xffff)
+#define VENDOR_ID(X) (((X)&0xffff))
+#define PCI_CFG_CMDSTAT 0x040044
+#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff)
+#define PCI_CFG_COMMAND(X) ((X)&0xffff)
+#define PCI_CLASS_REV 0x040048
+#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff)
+#define PCI_REVID(X) ((X)&0xff)
+#define PCI_LAT_TMR 0x04004c
+#define PCI_BASE10 0x040050
+#define PCI_BASE14 0x040054
+#define PCI_BASE18 0x040058
+#define PCI_SUBSYS_ID 0x04006c
+#define PCI_CAP_PTR 0x040074
+#define PCI_CFG_MISC 0x04007c
+#define PCI_PMC 0x040080
+#define PCI_PWR_STATE 0x040084
+#define PCI_IO 0x040088
+#define PCI_SLVTUNING 0x04008C
+#define PCI_DMATUNING 0x040090
+#define PCI_DMAEADDR 0x040800
+#define PCI_DMAIADDR 0x040804
+#define PCI_DMALEN 0x040808
+#define PCI_DMACTRL 0x04080C
+#define PCI_XIOCTRL 0x040810
+#define PCI_SEL0PROF 0x040814
+#define PCI_SEL1PROF 0x040818
+#define PCI_SEL2PROF 0x04081C
+#define PCI_GPXIOADDR 0x040820
+#define PCI_NANDCTRLS 0x400830
+#define PCI_SEL3PROF 0x040834
+#define PCI_SEL4PROF 0x040838
+#define PCI_GPXIO_STAT 0x040FB0
+#define PCI_GPXIO_IMASK 0x040FB4
+#define PCI_GPXIO_ICLR 0x040FB8
+#define PCI_GPXIO_ISET 0x040FBC
+#define PCI_GPPM_STATUS 0x040FC0
+#define GPPM_DONE (1<<10)
+#define GPPM_ERR (1<<9)
+#define GPPM_MPAR_ERR (1<<8)
+#define GPPM_PAR_ERR (1<<7)
+#define GPPM_R_MABORT (1<<2)
+#define GPPM_R_TABORT (1<<1)
+#define PCI_GPPM_IMASK 0x040FC4
+#define PCI_GPPM_ICLR 0x040FC8
+#define PCI_GPPM_ISET 0x040FCC
+#define PCI_DMA_STATUS 0x040FD0
+#define PCI_DMA_IMASK 0x040FD4
+#define PCI_DMA_ICLR 0x040FD8
+#define PCI_DMA_ISET 0x040FDC
+#define PCI_ISTATUS 0x040FE0
+#define PCI_IMASK 0x040FE4
+#define PCI_ICLR 0x040FE8
+#define PCI_ISET 0x040FEC
+#define PCI_MOD_ID 0x040FFC
+
+/*
+ * PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF 0
+#define PCI_CFG_TYPE0_FUNC_SHF 8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF 0
+#define PCI_CFG_TYPE1_FUNC_SHF 8
+#define PCI_CFG_TYPE1_DEV_SHF 11
+#define PCI_CFG_TYPE1_BUS_SHF 16
+
+/*
+ * Ethernet device DP83816 definition
+ */
+#define DP83816_IRQ_ETHER 66
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/uart.h b/include/asm-mips/mach-pnx8550/uart.h
new file mode 100644
index 0000000..e32b9a2
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/uart.h
@@ -0,0 +1,16 @@
+#ifndef __IP3106_UART_H
+#define __IP3106_UART_H
+
+#include <int.h>
+
+/* early macros for kgdb use. fixme: clean this up */
+
+#define UART_BASE 0xbbe4a000 /* PNX8550 */
+
+#define PNX8550_UART_PORT0 (UART_BASE)
+#define PNX8550_UART_PORT1 (UART_BASE + 0x1000)
+
+#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x)
+#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19)
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/usb.h b/include/asm-mips/mach-pnx8550/usb.h
new file mode 100644
index 0000000..483b7fc
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/usb.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * USB specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_USB_H
+#define __PNX8550_USB_H
+
+/*
+ * USB Host controller
+ */
+
+#define PNX8550_USB_OHCI_OP_BASE 0x1be48000
+#define PNX8550_USB_OHCI_OP_LEN 0x1000
+
+#endif
diff --git a/include/asm-mips/mach-rm200/cpu-feature-overrides.h b/include/asm-mips/mach-rm200/cpu-feature-overrides.h
index f487360..79f9b06 100644
--- a/include/asm-mips/mach-rm200/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-rm200/cpu-feature-overrides.h
@@ -14,7 +14,7 @@
#define cpu_has_tlb 1
#define cpu_has_4kex 1
-#define cpu_has_4ktlb 1
+#define cpu_has_4kcache 1
#define cpu_has_fpu 1
#define cpu_has_32fpr 1
#define cpu_has_counter 1
@@ -31,6 +31,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
index a3a2cc6..193a666 100644
--- a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 1
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
diff --git a/include/asm-mips/mach-sim/cpu-feature-overrides.h b/include/asm-mips/mach-sim/cpu-feature-overrides.h
new file mode 100644
index 0000000..cadbe8e
--- /dev/null
+++ b/include/asm-mips/mach-sim/cpu-feature-overrides.h
@@ -0,0 +1,66 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ */
+#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+
+#include <linux/config.h>
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4kcache 1
+#define cpu_has_fpu 0
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_subset_pcaches ? */
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4kcache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_subset_pcaches ? */
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
index 58603e3..463d051 100644
--- a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
@@ -36,10 +37,4 @@
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
-/*
- * On the RM9000 we need to ensure that I-cache lines being fetches only
- * contain valid instructions are funny things will happen.
- */
-#define PLAT_TRAMPOLINE_STUFF_LINE 32UL
-
#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
index 65d1d16..25b6ffc 100644
--- a/include/asm-mips/mips-boards/generic.h
+++ b/include/asm-mips/mips-boards/generic.h
@@ -66,6 +66,7 @@
#define MIPS_REVISION_CORID_CORE_EMUL 6
#define MIPS_REVISION_CORID_CORE_FPGA2 7
#define MIPS_REVISION_CORID_CORE_FPGAR2 8
+#define MIPS_REVISION_CORID_CORE_FPGA3 9
/**** Artificial corid defines ****/
/*
@@ -79,4 +80,10 @@
extern unsigned int mips_revision_corid;
+#ifdef CONFIG_PCI
+extern void mips_pcibios_init(void);
+#else
+#define mips_pcibios_init() do { } while (0)
+#endif
+
#endif /* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h
index 3761818..da6cc2f 100644
--- a/include/asm-mips/mips-boards/maltaint.h
+++ b/include/asm-mips/mips-boards/maltaint.h
@@ -25,9 +25,63 @@
#ifndef _MIPS_MALTAINT_H
#define _MIPS_MALTAINT_H
-/* Number of IRQ supported on hw interrupt 0. */
-#define MALTAINT_END 16
+/*
+ * Interrupts 0..15 are used for Malta ISA compatible interrupts
+ */
+#define MALTA_INT_BASE 0
+/*
+ * Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
+ */
+#define MIPSCPU_INT_BASE 16
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0 0
+#define MIPSCPU_INT_SW1 1
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1 3
+#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1
+#define MIPSCPU_INT_MB2 4
+#define MIPSCPU_INT_MB3 5
+#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
+#define MIPSCPU_INT_MB4 6
+#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
+#define MIPSCPU_INT_CPUCTR 7
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE 64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR 0
+#define MSC01C_INT_PCI 1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE 64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0 1
+#define MSC01E_INT_SW1 2
+#define MSC01E_INT_MB0 3
+#define MSC01E_INT_I8259A MSC01E_INT_MB0
+#define MSC01E_INT_MB1 4
+#define MSC01E_INT_SMI MSC01E_INT_MB1
+#define MSC01E_INT_MB2 5
+#define MSC01E_INT_MB3 6
+#define MSC01E_INT_COREHI MSC01E_INT_MB3
+#define MSC01E_INT_MB4 7
+#define MSC01E_INT_CORELO MSC01E_INT_MB4
+#define MSC01E_INT_TMR 8
+#define MSC01E_INT_PCI 9
+#define MSC01E_INT_PERFCTR 10
+#define MSC01E_INT_CPUCTR 11
+
+#ifndef __ASSEMBLY__
extern void maltaint_init(void);
+#endif
#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/include/asm-mips/mips-boards/msc01_pci.h b/include/asm-mips/mips-boards/msc01_pci.h
index 6b2a87a..8eaefb8 100644
--- a/include/asm-mips/mips-boards/msc01_pci.h
+++ b/include/asm-mips/mips-boards/msc01_pci.h
@@ -1,8 +1,9 @@
/*
* PCI Register definitions for the MIPS System Controller.
*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -29,22 +30,22 @@
#define MSC01_PCI_CFGADDR_OFS 0x0610
#define MSC01_PCI_CFGDATA_OFS 0x0618
#define MSC01_PCI_IACK_OFS 0x0620
-#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */
-#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */
-#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */
-#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */
-#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */
-#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */
-#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */
-#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */
-#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */
-#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */
-#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */
-#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */
-#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */
-#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */
-#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */
-#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */
+#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */
+#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */
+#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */
+#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */
+#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */
+#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */
+#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */
+#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */
+#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */
+#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */
+#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */
+#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */
+#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */
+#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */
+#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */
+#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */
#define MSC01_PCI_BAR0_OFS 0x2220
#define MSC01_PCI_CFG_OFS 0x2380
#define MSC01_PCI_SWAP_OFS 0x2388
@@ -86,73 +87,73 @@
#define MSC01_PCI_P2SCMAPL_MAP_SHF 24
#define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000
-#define MSC01_PCI_INTCFG_RST_SHF 10
-#define MSC01_PCI_INTCFG_RST_MSK 0x00000400
-#define MSC01_PCI_INTCFG_RST_BIT 0x00000400
-#define MSC01_PCI_INTCFG_MWE_SHF 9
-#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200
-#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200
-#define MSC01_PCI_INTCFG_DTO_SHF 8
-#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100
-#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100
-#define MSC01_PCI_INTCFG_MA_SHF 7
-#define MSC01_PCI_INTCFG_MA_MSK 0x00000080
-#define MSC01_PCI_INTCFG_MA_BIT 0x00000080
-#define MSC01_PCI_INTCFG_TA_SHF 6
-#define MSC01_PCI_INTCFG_TA_MSK 0x00000040
-#define MSC01_PCI_INTCFG_TA_BIT 0x00000040
-#define MSC01_PCI_INTCFG_RTY_SHF 5
-#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020
-#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020
-#define MSC01_PCI_INTCFG_MWP_SHF 4
-#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010
-#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010
-#define MSC01_PCI_INTCFG_MRP_SHF 3
-#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008
-#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008
-#define MSC01_PCI_INTCFG_SWP_SHF 2
-#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004
-#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004
-#define MSC01_PCI_INTCFG_SRP_SHF 1
-#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002
-#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002
-#define MSC01_PCI_INTCFG_SE_SHF 0
-#define MSC01_PCI_INTCFG_SE_MSK 0x00000001
-#define MSC01_PCI_INTCFG_SE_BIT 0x00000001
+#define MSC01_PCI_INTCFG_RST_SHF 10
+#define MSC01_PCI_INTCFG_RST_MSK 0x00000400
+#define MSC01_PCI_INTCFG_RST_BIT 0x00000400
+#define MSC01_PCI_INTCFG_MWE_SHF 9
+#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200
+#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200
+#define MSC01_PCI_INTCFG_DTO_SHF 8
+#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100
+#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100
+#define MSC01_PCI_INTCFG_MA_SHF 7
+#define MSC01_PCI_INTCFG_MA_MSK 0x00000080
+#define MSC01_PCI_INTCFG_MA_BIT 0x00000080
+#define MSC01_PCI_INTCFG_TA_SHF 6
+#define MSC01_PCI_INTCFG_TA_MSK 0x00000040
+#define MSC01_PCI_INTCFG_TA_BIT 0x00000040
+#define MSC01_PCI_INTCFG_RTY_SHF 5
+#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020
+#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020
+#define MSC01_PCI_INTCFG_MWP_SHF 4
+#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010
+#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010
+#define MSC01_PCI_INTCFG_MRP_SHF 3
+#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008
+#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008
+#define MSC01_PCI_INTCFG_SWP_SHF 2
+#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004
+#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004
+#define MSC01_PCI_INTCFG_SRP_SHF 1
+#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002
+#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002
+#define MSC01_PCI_INTCFG_SE_SHF 0
+#define MSC01_PCI_INTCFG_SE_MSK 0x00000001
+#define MSC01_PCI_INTCFG_SE_BIT 0x00000001
-#define MSC01_PCI_INTSTAT_RST_SHF 10
-#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400
-#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400
-#define MSC01_PCI_INTSTAT_MWE_SHF 9
-#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200
-#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200
-#define MSC01_PCI_INTSTAT_DTO_SHF 8
-#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100
-#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100
-#define MSC01_PCI_INTSTAT_MA_SHF 7
-#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080
-#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080
-#define MSC01_PCI_INTSTAT_TA_SHF 6
-#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040
-#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040
-#define MSC01_PCI_INTSTAT_RTY_SHF 5
-#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020
-#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020
-#define MSC01_PCI_INTSTAT_MWP_SHF 4
-#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010
-#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010
-#define MSC01_PCI_INTSTAT_MRP_SHF 3
-#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008
-#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008
-#define MSC01_PCI_INTSTAT_SWP_SHF 2
-#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004
-#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004
-#define MSC01_PCI_INTSTAT_SRP_SHF 1
-#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002
-#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002
-#define MSC01_PCI_INTSTAT_SE_SHF 0
-#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001
-#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001
+#define MSC01_PCI_INTSTAT_RST_SHF 10
+#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400
+#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400
+#define MSC01_PCI_INTSTAT_MWE_SHF 9
+#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200
+#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200
+#define MSC01_PCI_INTSTAT_DTO_SHF 8
+#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100
+#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100
+#define MSC01_PCI_INTSTAT_MA_SHF 7
+#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080
+#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080
+#define MSC01_PCI_INTSTAT_TA_SHF 6
+#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040
+#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040
+#define MSC01_PCI_INTSTAT_RTY_SHF 5
+#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020
+#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020
+#define MSC01_PCI_INTSTAT_MWP_SHF 4
+#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010
+#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010
+#define MSC01_PCI_INTSTAT_MRP_SHF 3
+#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008
+#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008
+#define MSC01_PCI_INTSTAT_SWP_SHF 2
+#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004
+#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004
+#define MSC01_PCI_INTSTAT_SRP_SHF 1
+#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002
+#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002
+#define MSC01_PCI_INTSTAT_SE_SHF 0
+#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001
+#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001
#define MSC01_PCI_CFGADDR_BNUM_SHF 16
#define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000
@@ -167,29 +168,29 @@
#define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff
/* The defines below are ONLY valid for a MEM bar! */
-#define MSC01_PCI_BAR0_SIZE_SHF 4
-#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0
-#define MSC01_PCI_BAR0_P_SHF 3
-#define MSC01_PCI_BAR0_P_MSK 0x00000008
-#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK
-#define MSC01_PCI_BAR0_D_SHF 1
-#define MSC01_PCI_BAR0_D_MSK 0x00000006
-#define MSC01_PCI_BAR0_T_SHF 0
-#define MSC01_PCI_BAR0_T_MSK 0x00000001
-#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK
+#define MSC01_PCI_BAR0_SIZE_SHF 4
+#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0
+#define MSC01_PCI_BAR0_P_SHF 3
+#define MSC01_PCI_BAR0_P_MSK 0x00000008
+#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK
+#define MSC01_PCI_BAR0_D_SHF 1
+#define MSC01_PCI_BAR0_D_MSK 0x00000006
+#define MSC01_PCI_BAR0_T_SHF 0
+#define MSC01_PCI_BAR0_T_MSK 0x00000001
+#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK
-#define MSC01_PCI_CFG_RA_SHF 17
-#define MSC01_PCI_CFG_RA_MSK 0x00020000
-#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK
-#define MSC01_PCI_CFG_G_SHF 16
-#define MSC01_PCI_CFG_G_MSK 0x00010000
-#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK
-#define MSC01_PCI_CFG_EN_SHF 15
-#define MSC01_PCI_CFG_EN_MSK 0x00008000
-#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK
-#define MSC01_PCI_CFG_MAXRTRY_SHF 0
-#define MSC01_PCI_CFG_MAXRTRY_MSK 0x000000ff
+#define MSC01_PCI_CFG_RA_SHF 17
+#define MSC01_PCI_CFG_RA_MSK 0x00020000
+#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK
+#define MSC01_PCI_CFG_G_SHF 16
+#define MSC01_PCI_CFG_G_MSK 0x00010000
+#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK
+#define MSC01_PCI_CFG_EN_SHF 15
+#define MSC01_PCI_CFG_EN_MSK 0x00008000
+#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK
+#define MSC01_PCI_CFG_MAXRTRY_SHF 0
+#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff
#define MSC01_PCI_SWAP_IO_SHF 18
#define MSC01_PCI_SWAP_IO_MSK 0x000c0000
@@ -206,7 +207,7 @@
* FIXME - are these macros specific to Malta and co or to the MSC? If the
* latter, they should be moved elsewhere.
*/
-#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000
+#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000
extern unsigned long _pcictrl_msc;
@@ -219,19 +220,19 @@
* Registers absolute addresses
*/
-#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
-#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
-#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
-#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
-#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
-#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
-#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
-#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
-#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
-#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
-#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
-#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
-#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
+#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
+#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
+#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
+#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
+#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
+#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
+#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
+#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
+#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
+#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
+#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
+#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
+#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
#define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS)
#define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS)
#define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS)
@@ -248,7 +249,7 @@
#define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
#define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
#define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
-#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
#define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS)
#define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS)
#define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS)
diff --git a/include/asm-mips/mips-boards/sim.h b/include/asm-mips/mips-boards/sim.h
new file mode 100644
index 0000000..acb7c23
--- /dev/null
+++ b/include/asm-mips/mips-boards/sim.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_MIPS_BOARDS_SIM_H
+#define _ASM_MIPS_BOARDS_SIM_H
+
+#define STATS_ON 1
+#define STATS_OFF 2
+#define STATS_CLEAR 3
+#define STATS_DUMP 4
+#define TRACE_ON 5
+#define TRACE_OFF 6
+
+
+#define simcfg(code) \
+({ \
+ __asm__ __volatile__( \
+ "sltiu $0,$0, %0" \
+ ::"i"(code) \
+ ); \
+})
+
+
+
+#endif
diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h
new file mode 100644
index 0000000..4952e0b
--- /dev/null
+++ b/include/asm-mips/mips-boards/simint.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _MIPS_SIMINT_H
+#define _MIPS_SIMINT_H
+
+
+#define SIM_INT_BASE 0
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_BASE 16
+#define MIPS_CPU_TIMER_IRQ 7
+
+
+#define MIPSCPU_INT_CPUCTR 7
+
+#define MSC01E_INT_BASE 64
+
+#define MIPSCPU_INT_CPUCTR 7
+#define MSC01E_INT_CPUCTR 11
+
+#endif
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644
index 0000000..a669c07
--- /dev/null
+++ b/include/asm-mips/mipsmtregs.h
@@ -0,0 +1,391 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/mipsregs.h>
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind() __read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext() __read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL $0,1
+#define CP0_MVPCONF0 $0,2
+#define CP0_MVPCONF1 $0,3
+#define CP0_VPECONTROL $1,1
+#define CP0_VPECONF0 $1,2
+#define CP0_VPECONF1 $1,3
+#define CP0_YQMASK $1,4
+#define CP0_VPESCHEDULE $1,5
+#define CP0_VPESCHEFBK $1,6
+#define CP0_TCSTATUS $2,1
+#define CP0_TCBIND $2,2
+#define CP0_TCRESTART $2,3
+#define CP0_TCHALT $2,4
+#define CP0_TCCONTEXT $2,5
+#define CP0_TCSCHEDULE $2,6
+#define CP0_TCSCHEFBK $2,7
+#define CP0_SRSCONF0 $6,1
+#define CP0_SRSCONF1 $6,2
+#define CP0_SRSCONF2 $6,3
+#define CP0_SRSCONF3 $6,4
+#define CP0_SRSCONF4 $6,5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP (_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT 1
+#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT 2
+#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT 0
+#define MVPCONF0_PTC ( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT 10
+#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT 15
+#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT 16
+#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT 29
+#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT 31
+#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT 2
+#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC (_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT 15
+#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT 16
+#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU 0
+#define THREX_TO 1
+#define THREX_IYQ 2
+#define THREX_GSX 3
+#define THREX_YSCH 4
+#define THREX_GSSCH 5
+
+#define VPECONTROL_GSI_SHIFT 20
+#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT 21
+#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT 0
+#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT 1
+#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT 21
+#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID (_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT 10
+#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT 11
+#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT 13
+#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT 15
+#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT 20
+#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT 21
+#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT 22
+#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT 23
+#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING 0
+#define TC_WAITING 1
+#define TC_YIELDING 2
+#define TC_GATED 3
+
+#define TCSTATUS_TMX_SHIFT 27
+#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT 0
+#define TCBIND_CURVPE (_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT 21
+
+#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H (_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+extern void mips_mt_regdump(void);
+
+static inline unsigned int dvpe(void)
+{
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_evpe(void)
+{
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+}
+
+/* Enable multiMT if previous suggested it should be.
+ EMT_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+ if ((previous & MVPCONTROL_EVP))
+ __raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips32r2 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
+ " ehb \n"
+ " move %0, $1 \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_emt(void)
+{
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " .set mips32r2 \n"
+ " emt \n"
+ " ehb \n"
+ " .set mips0 \n"
+ " .set reorder");
+}
+
+/* enable multiVPE if previous suggested it should be.
+ EVPE_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+ if ((previous & EMT_ENABLE))
+ __raw_emt();
+}
+
+static inline void ehb(void)
+{
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " ehb \n"
+ " .set mips0 \n");
+}
+
+#define mftc0(rt,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " # mftc0 $1, $" #rt ", " #sel " \n" \
+ " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftgpr(rt) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " mftgpr %0," #rt " \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftr(rt,u,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ ".set noat\n\t" \
+ "mftr\t%0, " #rt ", " #u ", " #sel "\n\t" \
+ ".set at\n\t" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mttgpr(rd,v) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttgpr $1, " #rd " \n" \
+ " .word 0x41810020 | (" #rd " << 11) \n" \
+ " .set pop \n" \
+ : : "r" (v)); \
+} while (0)
+
+#define mttc0(rd,sel,v) \
+({ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttc0 %0," #rd ", " #sel " \n" \
+ " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \
+ " .set pop \n" \
+ : \
+ : "r" (v)); \
+})
+
+
+#define mttr(rd,u,sel,v) \
+({ \
+ __asm__ __volatile__( \
+ "mttr %0," #rd ", " #u ", " #sel \
+ : : "r" (v)); \
+})
+
+
+#define settc(tc) \
+do { \
+ write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+ ehb(); \
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol() mftc0(1, 1)
+#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
+#define read_vpe_c0_vpeconf0() mftc0(1, 2)
+#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
+#define read_vpe_c0_status() mftc0(12, 0)
+#define write_vpe_c0_status(val) mttc0(12, 0, val)
+#define read_vpe_c0_cause() mftc0(13, 0)
+#define write_vpe_c0_cause(val) mttc0(13, 0, val)
+#define read_vpe_c0_config() mftc0(16, 0)
+#define write_vpe_c0_config(val) mttc0(16, 0, val)
+#define read_vpe_c0_config1() mftc0(16, 1)
+#define write_vpe_c0_config1(val) mttc0(16, 1, val)
+#define read_vpe_c0_config7() mftc0(16, 7)
+#define write_vpe_c0_config7(val) mttc0(16, 7, val)
+#define read_vpe_c0_ebase() mftc0(15,1)
+#define write_vpe_c0_ebase(val) mttc0(15, 1, val)
+#define write_vpe_c0_compare(val) mttc0(11, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus() mftc0(2, 1)
+#define write_tc_c0_tcstatus(val) mttc0(2,1,val)
+#define read_tc_c0_tcbind() mftc0(2, 2)
+#define write_tc_c0_tcbind(val) mttc0(2,2,val)
+#define read_tc_c0_tcrestart() mftc0(2, 3)
+#define write_tc_c0_tcrestart(val) mttc0(2,3,val)
+#define read_tc_c0_tchalt() mftc0(2, 4)
+#define write_tc_c0_tchalt(val) mttc0(2,4,val)
+#define read_tc_c0_tccontext() mftc0(2, 5)
+#define write_tc_c0_tccontext(val) mttc0(2,5,val)
+
+/* GPR */
+#define read_tc_gpr_sp() mftgpr(29)
+#define write_tc_gpr_sp(val) mttgpr(29, val)
+#define read_tc_gpr_gp() mftgpr(28)
+#define write_tc_gpr_gp(val) mttgpr(28, val)
+
+__BUILD_SET_C0(mvpcontrol)
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 2197aa4..80370e0 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -8,7 +8,7 @@
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
@@ -96,6 +96,16 @@
#define CP0_S1_INTCONTROL $20
/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
* TX39 Series
*/
#define CP0_TX39_CACHE $7
@@ -281,6 +291,11 @@
#define ST0_DL (_ULCAST_(1) << 24)
/*
+ * Enable the MIPS DSP ASE
+ */
+#define ST0_MX 0x01000000
+
+/*
* Bitfields in the TX39 family CP0 Configuration Register 3
*/
#define TX39_CONF_ICS_SHIFT 19
@@ -433,6 +448,14 @@
#define R5K_CONF_SE (_ULCAST_(1) << 12)
#define R5K_CONF_SS (_ULCAST_(3) << 20)
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
/* Bits specific to the R10000. */
#define R10K_CONF_DN (_ULCAST_(3) << 3)
#define R10K_CONF_CT (_ULCAST_(1) << 5)
@@ -475,6 +498,53 @@
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+/*
* R10000 performance counter definitions.
*
* FIXME: The R10000 performance counter opens a nice way to implement CPU
@@ -621,13 +691,13 @@
if (sel == 0) \
__asm__ __volatile__( \
"mtc0\t%z0, " #register "\n\t" \
- : : "Jr" ((unsigned int)value)); \
+ : : "Jr" ((unsigned int)(value))); \
else \
__asm__ __volatile__( \
".set\tmips32\n\t" \
"mtc0\t%z0, " #register ", " #sel "\n\t" \
".set\tmips0" \
- : : "Jr" ((unsigned int)value)); \
+ : : "Jr" ((unsigned int)(value))); \
} while (0)
#define __write_64bit_c0_register(register, sel, value) \
@@ -676,7 +746,7 @@
do { \
__asm__ __volatile__( \
"ctc0\t%z0, " #register "\n\t" \
- : : "Jr" ((unsigned int)value)); \
+ : : "Jr" ((unsigned int)(value))); \
} while (0)
/*
@@ -769,12 +839,24 @@
#define read_c0_count() __read_32bit_c0_register($9, 0)
#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
#define read_c0_compare() __read_32bit_c0_register($11, 0)
#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
#define read_c0_status() __read_32bit_c0_register($12, 0)
#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
@@ -790,10 +872,18 @@
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
/*
* The WatchLo register. There may be upto 8 of them.
@@ -917,6 +1007,22 @@
#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7,0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15,1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
+
/*
* Macros to access the floating point coprocessor control registers
*/
@@ -930,6 +1036,284 @@
: "=r" (__res)); \
__res;})
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 15) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#if 0 /* Need DSP ASE capable assembler ... */
+#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+
+#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+
+#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+
+#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+
+#else
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#endif
+
/*
* TLB operations.
*
@@ -1012,6 +1396,8 @@
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h
index 45cd72d..19cdf76 100644
--- a/include/asm-mips/mmu_context.h
+++ b/include/asm-mips/mmu_context.h
@@ -30,7 +30,7 @@
#ifdef CONFIG_32BIT
#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << 23); \
+ write_c0_context((unsigned long) smp_processor_id() << 25); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
@@ -40,7 +40,7 @@
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << 23); \
+ write_c0_context((unsigned long) smp_processor_id() << 26); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
diff --git a/include/asm-mips/mmzone.h b/include/asm-mips/mmzone.h
index d721143..011caeb 100644
--- a/include/asm-mips/mmzone.h
+++ b/include/asm-mips/mmzone.h
@@ -5,6 +5,7 @@
#ifndef _ASM_MMZONE_H_
#define _ASM_MMZONE_H_
+#include <linux/config.h>
#include <asm/page.h>
#include <mmzone.h>
diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h
index 0be58b2..2be3993 100644
--- a/include/asm-mips/module.h
+++ b/include/asm-mips/module.h
@@ -14,15 +14,23 @@
typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
-typedef struct
-{
- Elf64_Addr r_offset; /* Address of relocation. */
- Elf64_Word r_sym; /* Symbol index. */
- Elf64_Byte r_ssym; /* Special symbol. */
- Elf64_Byte r_type3; /* Third relocation. */
- Elf64_Byte r_type2; /* Second relocation. */
- Elf64_Byte r_type; /* First relocation. */
- Elf64_Sxword r_addend; /* Addend. */
+typedef struct {
+ Elf64_Addr r_offset; /* Address of relocation. */
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+} Elf64_Mips_Rel;
+
+typedef struct {
+ Elf64_Addr r_offset; /* Address of relocation. */
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+ Elf64_Sxword r_addend; /* Addend. */
} Elf64_Mips_Rela;
#ifdef CONFIG_32BIT
@@ -30,6 +38,13 @@
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Addr Elf32_Addr
+
+#define Elf_Mips_Rel Elf32_Rel
+#define Elf_Mips_Rela Elf32_Rela
+
+#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info)
+#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info)
#endif
@@ -38,6 +53,13 @@
#define Elf_Shdr Elf64_Shdr
#define Elf_Sym Elf64_Sym
#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Addr Elf64_Addr
+
+#define Elf_Mips_Rel Elf64_Mips_Rel
+#define Elf_Mips_Rela Elf64_Mips_Rela
+
+#define ELF_MIPS_R_SYM(rel) (rel.r_sym)
+#define ELF_MIPS_R_TYPE(rel) (rel.r_type)
#endif
@@ -53,4 +75,54 @@
}
#endif
+#ifdef CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1"
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2"
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1"
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2"
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000"
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX"
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX"
+#elif defined CONFIG_CPU_R4300
+#define MODULE_PROC_FAMILY "R4300"
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00"
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX"
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000"
+#elif defined CONFIG_CPU_R5432
+#define MODULE_PROC_FAMILY "R5432"
+#elif defined CONFIG_CPU_R6000
+#define MODULE_PROC_FAMILY "R6000"
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA"
+#elif defined CONFIG_CPU_R8000
+#define MODULE_PROC_FAMILY "R8000"
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000"
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000"
+#elif defined CONFIG_CPU_RM9000
+#define MODULE_PROC_FAMILY "RM9000"
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1"
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+
#endif /* _ASM_MODULE_H */
diff --git a/include/asm-mips/paccess.h b/include/asm-mips/paccess.h
index 309bc30..46f2d23 100644
--- a/include/asm-mips/paccess.h
+++ b/include/asm-mips/paccess.h
@@ -52,7 +52,7 @@
})
#define __get_dbe_asm(insn) \
-({ \
+{ \
__asm__ __volatile__( \
"1:\t" insn "\t%1,%2\n\t" \
"move\t%0,$0\n" \
@@ -67,7 +67,7 @@
".previous" \
:"=r" (__gu_err), "=r" (__gu_val) \
:"o" (__mp(__gu_addr)), "i" (-EFAULT)); \
-})
+}
extern void __get_dbe_unknown(void);
@@ -90,7 +90,7 @@
})
#define __put_dbe_asm(insn) \
-({ \
+{ \
__asm__ __volatile__( \
"1:\t" insn "\t%1,%2\n\t" \
"move\t%0,$0\n" \
@@ -104,7 +104,7 @@
".previous" \
: "=r" (__pu_err) \
: "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \
-})
+}
extern void __put_dbe_unknown(void);
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 652b6d6..ee25a77 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -87,22 +87,48 @@
typedef struct { unsigned long pte; } pte_t;
#define pte_val(x) ((x).pte)
#endif
+#define __pte(x) ((pte_t) { (x) } )
+
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+#ifdef CONFIG_64BIT
typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
#define pmd_val(x) ((x).pmd)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
-
-#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
+
+#endif
+
+/*
+ * Right now we don't support 4-level pagetables, so all pud-related
+ * definitions come from <asm-generic/pgtable-nopud.h>.
+ */
+
+/*
+ * Finall the top of the hierarchy, the pgd
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x) ((x).pgd)
#define __pgd(x) ((pgd_t) { (x) } )
+
+/*
+ * Manipulate page protection bits
+ */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x) ((x).pgprot)
#define __pgprot(x) ((pgprot_t) { (x) } )
+/*
+ * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd
+ * pair of pages we only have a single global bit per pair of pages. When
+ * writing to the TLB make sure we always have the bit set for both pages
+ * or none. This macro is used to access the `buddy' of the pte we're just
+ * working on.
+ */
+#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
+
#endif /* !__ASSEMBLY__ */
/* to align the pointer to the (next) page boundary */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c9a00ca..6c9ad81 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -40,6 +40,11 @@
unsigned int need_domain_info;
int iommu;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
};
/*
@@ -142,8 +147,22 @@
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
-extern void pcibios_bus_to_resource(struct pci_dev *dev,
- struct resource *res, struct pci_bus_region *region);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
#ifdef CONFIG_PCI_DOMAINS
@@ -169,17 +188,4 @@
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
- struct resource *root = NULL;
-
- if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
-
- return root;
-}
-
#endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h
index ce57288..fe1df57 100644
--- a/include/asm-mips/pgalloc.h
+++ b/include/asm-mips/pgalloc.h
@@ -26,10 +26,22 @@
}
/*
+ * Initialize a new pmd table with invalid pointers.
+ */
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+#ifdef CONFIG_64BIT
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ set_pud(pud, __pud((unsigned long)pmd));
+}
+#endif
+
+/*
* Initialize a new pgd / pmd table with invalid pointers.
*/
extern void pgd_init(unsigned long page);
-extern void pmd_init(unsigned long page, unsigned long pagetable);
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
@@ -86,21 +98,18 @@
#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
#ifdef CONFIG_32BIT
-#define pgd_populate(mm, pmd, pte) BUG()
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
* inside the pgd, so has no extra memory associated with it.
*/
-#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(x) do { } while (0)
#define __pmd_free_tlb(tlb,x) do { } while (0)
+
#endif
#ifdef CONFIG_64BIT
-#define pgd_populate(mm, pgd, pmd) set_pgd(pgd, __pgd(pmd))
-
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
pmd_t *pmd;
diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 7fec93b..0cff64c 100644
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -17,6 +17,8 @@
#include <asm/cachectl.h>
#include <asm/fixmap.h>
+#include <asm-generic/pgtable-nopmd.h>
+
/*
* - add_wired_entry() add a fixed TLB entry, and move wired register
*/
@@ -41,42 +43,38 @@
* works even with the cache aliasing problem the R4k and above have.
*/
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#ifdef CONFIG_64BIT_PHYS_ADDR
-#define PMD_SHIFT 21
-#else
-#define PMD_SHIFT 22
-#endif
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT PMD_SHIFT
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define PGDIR_SHIFT 21
+#else
+#define PGDIR_SHIFT 22
+#endif
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* Entries per page directory level: we use two-level, so
- * we don't really have any PMD directory physically.
+ * we don't really have any PUD/PMD directory physically.
*/
#ifdef CONFIG_64BIT_PHYS_ADDR
#define PGD_ORDER 1
-#define PMD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
#define PTE_ORDER 0
#else
#define PGD_ORDER 0
-#define PMD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
#define PTE_ORDER 0
#endif
#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
-#define PTRS_PER_PMD 1
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#define VMALLOC_START KSEG2
+#define VMALLOC_START MAP_BASE
#ifdef CONFIG_HIGHMEM
# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
@@ -91,8 +89,6 @@
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#endif
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
@@ -120,17 +116,7 @@
pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
}
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-static inline void pgd_clear(pgd_t *pgdp) { }
-
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t
@@ -151,27 +137,22 @@
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
#else
#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
#endif
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) */
#define __pgd_offset(address) pgd_index(address)
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
/* to find an entry in a page-table-directory */
#define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr))
-/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
-{
- return (pmd_t *) dir;
-}
-
/* Find an entry in the third-level page table.. */
#define __pte_offset(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
@@ -221,7 +202,7 @@
*/
#define PTE_FILE_MAX_BITS 27
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
/* fixme */
#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
#define pgoff_to_pte(off) \
diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h
index 1011e06..3e0a522 100644
--- a/include/asm-mips/pgtable-64.h
+++ b/include/asm-mips/pgtable-64.h
@@ -16,13 +16,15 @@
#include <asm/page.h>
#include <asm/cachectl.h>
+#include <asm-generic/pgtable-nopud.h>
+
/*
* Each address space has 2 4K pages as its page directory, giving 1024
* (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a
- * pair of 4K pages, giving 1024 (== PTRS_PER_PMD) 8 byte pointers to
- * page tables. Each page table is a single 4K page, giving 512 (==
- * PTRS_PER_PTE) 8 byte ptes. Each pgde is initialized to point to
- * invalid_pmd_table, each pmde is initialized to point to
+ * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page
+ * tables. Each page table is also a single 4K page, giving 512 (==
+ * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to
+ * invalid_pmd_table, each pmd entry is initialized to point to
* invalid_pte_table, each pte is initialized to 0. When memory is low,
* and a pmd table or a page table allocation fails, empty_bad_pmd_table
* and empty_bad_page_table is returned back to higher layer code, so
@@ -36,17 +38,17 @@
*/
/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - 3))
+#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + 1 - 3))
+#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
- * For 4kB page size we use a 3 level page tree and a 8kB pmd and pgds which
+ * For 4kB page size we use a 3 level page tree and an 8kB pud, which
* permits us mapping 40 bits of virtual address space.
*
* We used to implement 41 bits by having an order 1 pmd level but that seemed
@@ -57,7 +59,7 @@
* two levels would be easy to implement.
*
* For 16kB page size we use a 2 level page tree which permits a total of
- * 36 bits of virtual address space. We could add a third leve. but it seems
+ * 36 bits of virtual address space. We could add a third level but it seems
* like at the moment there's no need for this.
*
* For 64kB page size we use a 2 level page table tree for a total of 42 bits
@@ -65,21 +67,25 @@
*/
#ifdef CONFIG_PAGE_SIZE_4KB
#define PGD_ORDER 1
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_8KB
#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_16KB
#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
@@ -91,7 +97,7 @@
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#define VMALLOC_START XKSEG
+#define VMALLOC_START MAP_BASE
#define VMALLOC_END \
(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
@@ -102,13 +108,13 @@
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
-extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
-extern pte_t empty_bad_page_table[PAGE_SIZE/sizeof(pte_t)];
-extern pmd_t invalid_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)];
-extern pmd_t empty_bad_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)];
+extern pte_t invalid_pte_table[PTRS_PER_PTE];
+extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
+extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
/*
- * Empty pmd entries point to the invalid_pte_table.
+ * Empty pgd/pmd entries point to the invalid_pte_table.
*/
static inline int pmd_none(pmd_t pmd)
{
@@ -128,26 +134,30 @@
}
/*
- * Empty pgd entries point to the invalid_pmd_table.
+ * Empty pud entries point to the invalid_pmd_table.
*/
-static inline int pgd_none(pgd_t pgd)
+static inline int pud_none(pud_t pud)
{
- return pgd_val(pgd) == (unsigned long) invalid_pmd_table;
+ return pud_val(pud) == (unsigned long) invalid_pmd_table;
}
-#define pgd_bad(pgd) (pgd_val(pgd) &~ PAGE_MASK)
-
-static inline int pgd_present(pgd_t pgd)
+static inline int pud_bad(pud_t pud)
{
- return pgd_val(pgd) != (unsigned long) invalid_pmd_table;
+ return pud_val(pud) & ~PAGE_MASK;
}
-static inline void pgd_clear(pgd_t *pgdp)
+static inline int pud_present(pud_t pud)
{
- pgd_val(*pgdp) = ((unsigned long) invalid_pmd_table);
+ return pud_val(pud) != (unsigned long) invalid_pmd_table;
}
-#define pte_page(x) pfn_to_page((unsigned long)((pte_val(x) >> PAGE_SHIFT)))
+static inline void pud_clear(pud_t *pudp)
+{
+ pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
+}
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
#ifdef CONFIG_CPU_VR41XX
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
@@ -157,26 +167,28 @@
#endif
#define __pgd_offset(address) pgd_index(address)
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address) pmd_index(address)
#define page_pte(page) page_pte_prot(page, __pgprot(0))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, 0)
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
/* to find an entry in a page-table-directory */
#define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr))
-static inline unsigned long pgd_page(pgd_t pgd)
+static inline unsigned long pud_page(pud_t pud)
{
- return pgd_val(pgd);
+ return pud_val(pud);
}
/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address)
+static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address)
{
- return (pmd_t *) pgd_page(*dir) +
- ((address >> PMD_SHIFT) & (PTRS_PER_PMD - 1));
+ return (pmd_t *) pud_page(*pud) + pmd_index(address);
}
/* Find an entry in the third-level page table.. */
diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h
index 3aad751..01e76e9 100644
--- a/include/asm-mips/pgtable-bits.h
+++ b/include/asm-mips/pgtable-bits.h
@@ -33,7 +33,7 @@
* unpredictable things. The code (when it is written) to deal with
* this problem will be in the update_mmu_cache() code for the r4k.
*/
-#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR)
#define _PAGE_PRESENT (1<<6) /* implemented in software */
#define _PAGE_READ (1<<7) /* implemented in software */
@@ -123,7 +123,7 @@
#endif
#endif
-#endif /* defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR) */
+#endif /* defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR) */
#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
@@ -140,7 +140,7 @@
#define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_COW
#endif
-#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR)
#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 3)
#else
#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 9)
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index eaf5d9b..1e8ae27 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -8,8 +8,6 @@
#ifndef _ASM_PGTABLE_H
#define _ASM_PGTABLE_H
-#include <asm-generic/4level-fixup.h>
-
#include <linux/config.h>
#ifdef CONFIG_32BIT
#include <asm/pgtable-32.h>
@@ -18,6 +16,7 @@
#include <asm/pgtable-64.h>
#endif
+#include <asm/io.h>
#include <asm/pgtable-bits.h>
#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
@@ -84,7 +83,7 @@
#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline void set_pte(pte_t *ptep, pte_t pte)
{
ptep->pte_high = pte.pte_high;
@@ -148,11 +147,18 @@
#endif
/*
- * (pmds are folded into pgds so this doesn't get actually called,
+ * (pmds are folded into puds so this doesn't get actually called,
* but the define is needed for a generic inline function.)
*/
#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
-#define set_pgd(pgdptr, pgdval) do { *(pgdptr) = (pgdval); } while(0)
+
+#ifdef CONFIG_64BIT
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+#endif
#define PGD_T_LOG2 ffz(~sizeof(pgd_t))
#define PMD_T_LOG2 ffz(~sizeof(pmd_t))
@@ -165,7 +171,7 @@
* Undefined behaviour if not..
*/
static inline int pte_user(pte_t pte) { BUG(); return 0; }
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_READ; }
static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_MODIFIED; }
@@ -324,7 +330,7 @@
*/
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte.pte_low &= _PAGE_CHG_MASK;
@@ -357,7 +363,6 @@
#endif
#ifdef CONFIG_64BIT_PHYS_ADDR
-extern phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size);
extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
static inline int io_remap_pfn_range(struct vm_area_struct *vma,
@@ -367,7 +372,7 @@
pgprot_t prot)
{
phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
- return remap_pfn_range(vma, vaddr, pfn, size, prot);
+ return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
}
#else
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index d6466aa..f1980c6 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -96,12 +96,26 @@
{{0,},} \
}
+#define NUM_DSP_REGS 6
+
+typedef __u32 dspreg_t;
+
+struct mips_dsp_state {
+ dspreg_t dspr[NUM_DSP_REGS];
+ unsigned int dspcontrol;
+ unsigned short used_dsp;
+};
+
+#define INIT_DSP {{0,},}
+
typedef struct {
unsigned long seg;
} mm_segment_t;
#define ARCH_MIN_TASKALIGN 8
+struct mips_abi;
+
/*
* If you change thread_struct remember to change the #defines below too!
*/
@@ -117,6 +131,9 @@
/* Saved fpu/fpu emulator stuff. */
union mips_fpu_union fpu;
+ /* Saved state of the DSP ASE, if available. */
+ struct mips_dsp_state dsp;
+
/* Other stuff associated with the thread. */
unsigned long cp0_badvaddr; /* Last user fault */
unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */
@@ -129,6 +146,7 @@
unsigned long mflags;
unsigned long irix_trampoline; /* Wheee... */
unsigned long irix_oldctx;
+ struct mips_abi *abi;
};
#define MF_ABI_MASK (MF_32BIT_REGS | MF_32BIT_ADDR)
@@ -151,6 +169,10 @@
*/ \
INIT_FPU, \
/* \
+ * saved dsp/dsp emulator stuff \
+ */ \
+ INIT_DSP, \
+ /* \
* Other stuff associated with the process \
*/ \
0, 0, 0, 0, \
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 2b5c624..95c5839 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -22,6 +22,8 @@
#define MMLO 68
#define FPC_CSR 69
#define FPC_EIR 70
+#define DSP_BASE 71 /* 3 more hi / lo register pairs */
+#define DSP_CONTROL 77
/*
* This struct defines the way the registers are stored on the stack during a
@@ -38,18 +40,18 @@
/* Saved special registers. */
unsigned long cp0_status;
- unsigned long lo;
unsigned long hi;
+ unsigned long lo;
unsigned long cp0_badvaddr;
unsigned long cp0_cause;
unsigned long cp0_epc;
};
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-/* #define PTRACE_GETREGS 12 */
-/* #define PTRACE_SETREGS 13 */
-/* #define PTRACE_GETFPREGS 14 */
-/* #define PTRACE_SETFPREGS 15 */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
/* #define PTRACE_GETFPXREGS 18 */
/* #define PTRACE_SETFPXREGS 19 */
@@ -58,6 +60,13 @@
#define PTRACE_GET_THREAD_AREA 25
#define PTRACE_SET_THREAD_AREA 26
+/* Calls to trace a 64bit program from a 32bit program. */
+#define PTRACE_PEEKTEXT_3264 0xc0
+#define PTRACE_PEEKDATA_3264 0xc1
+#define PTRACE_POKETEXT_3264 0xc2
+#define PTRACE_POKEDATA_3264 0xc3
+#define PTRACE_GET_THREAD_AREA_3264 0xc4
+
#ifdef __KERNEL__
#include <linux/linkage.h>
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index 5bea49f..a5ea9d8 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -21,7 +21,7 @@
*
* - The MIPS32 and MIPS64 specs permit an implementation to directly derive
* the index bits from the virtual address. This breaks with tradition
- * set by the R4000. To keep unpleassant surprises from happening we pick
+ * set by the R4000. To keep unpleasant surprises from happening we pick
* an address in KSEG0 / CKSEG0.
* - We need a properly sign extended address for 64-bit code. To get away
* without ifdefs we let the compiler do it by a type cast.
@@ -30,11 +30,11 @@
#define cache_op(op,addr) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3\n\t \n" \
" cache %0, %1 \n" \
- " .set mips0 \n" \
- " .set reorder" \
+ " .set pop \n" \
: \
: "i" (op), "m" (*(unsigned char *)(addr)))
@@ -84,14 +84,14 @@
static inline void protected_flush_icache_line(unsigned long addr)
{
__asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
- "1:\tcache %0,(%1)\n"
- "2:\t.set mips0\n\t"
- ".set reorder\n\t"
- ".section\t__ex_table,\"a\"\n\t"
- STR(PTR)"\t1b,2b\n\t"
- ".previous"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: cache %0, (%1) \n"
+ "2: .set pop \n"
+ " .section __ex_table,\"a\" \n"
+ " "STR(PTR)" 1b, 2b \n"
+ " .previous"
:
: "i" (Hit_Invalidate_I), "r" (addr));
}
@@ -100,19 +100,19 @@
* R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D
* cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style
* caches. We're talking about one cacheline unnecessarily getting invalidated
- * here so the penaltiy isn't overly hard.
+ * here so the penalty isn't overly hard.
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
__asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
- "1:\tcache %0,(%1)\n"
- "2:\t.set mips0\n\t"
- ".set reorder\n\t"
- ".section\t__ex_table,\"a\"\n\t"
- STR(PTR)"\t1b,2b\n\t"
- ".previous"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: cache %0, (%1) \n"
+ "2: .set pop \n"
+ " .section __ex_table,\"a\" \n"
+ " "STR(PTR)" 1b, 2b \n"
+ " .previous"
:
: "i" (Hit_Writeback_Inv_D), "r" (addr));
}
@@ -120,14 +120,14 @@
static inline void protected_writeback_scache_line(unsigned long addr)
{
__asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
- "1:\tcache %0,(%1)\n"
- "2:\t.set mips0\n\t"
- ".set reorder\n\t"
- ".section\t__ex_table,\"a\"\n\t"
- STR(PTR)"\t1b,2b\n\t"
- ".previous"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: cache %0, (%1) \n"
+ "2: .set pop \n"
+ " .section __ex_table,\"a\" \n"
+ " "STR(PTR)" 1b, 2b \n"
+ " .previous"
:
: "i" (Hit_Writeback_Inv_SD), "r" (addr));
}
@@ -142,6 +142,7 @@
#define cache16_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \
@@ -160,8 +161,7 @@
" cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \
" cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \
" cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
@@ -285,6 +285,7 @@
#define cache32_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \
@@ -303,8 +304,7 @@
" cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \
" cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \
" cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
@@ -428,6 +428,7 @@
#define cache64_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \
@@ -446,8 +447,7 @@
" cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \
" cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \
" cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
@@ -532,6 +532,7 @@
#define cache128_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \
@@ -550,8 +551,7 @@
" cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \
" cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \
" cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h
index 3c4b637..a60e0dc 100644
--- a/include/asm-mips/rtc.h
+++ b/include/asm-mips/rtc.h
@@ -14,7 +14,9 @@
#ifdef __KERNEL__
+#include <linux/spinlock.h>
#include <linux/rtc.h>
+#include <asm/time.h>
#define RTC_PIE 0x40 /* periodic interrupt enable */
#define RTC_AIE 0x20 /* alarm interrupt enable */
@@ -27,11 +29,52 @@
#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
-unsigned int get_rtc_time(struct rtc_time *time);
-int set_rtc_time(struct rtc_time *time);
-unsigned int get_rtc_ss(void);
-int get_rtc_pll(struct rtc_pll_info *pll);
-int set_rtc_pll(struct rtc_pll_info *pll);
+static DEFINE_SPINLOCK(mips_rtc_lock);
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+ unsigned long nowtime;
+
+ spin_lock(&mips_rtc_lock);
+ nowtime = rtc_get_time();
+ to_tm(nowtime, time);
+ time->tm_year -= 1900;
+ spin_unlock(&mips_rtc_lock);
+
+ return RTC_24H;
+}
+
+static inline int set_rtc_time(struct rtc_time *time)
+{
+ unsigned long nowtime;
+ int ret;
+
+ spin_lock(&mips_rtc_lock);
+ nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
+ time->tm_mday, time->tm_hour, time->tm_min,
+ time->tm_sec);
+ ret = rtc_set_time(nowtime);
+ spin_unlock(&mips_rtc_lock);
+
+ return ret;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+ struct rtc_time h;
+
+ get_rtc_time(&h);
+ return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
+
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
#endif
#endif
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
new file mode 100644
index 0000000..83cdf6a
--- /dev/null
+++ b/include/asm-mips/rtlx.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ */
+
+#ifndef _RTLX_H
+#define _RTLX_H_
+
+#define LX_NODE_BASE 10
+
+#define MIPSCPU_INT_BASE 16
+#define MIPS_CPU_RTLX_IRQ 0
+
+#define RTLX_VERSION 1
+#define RTLX_xID 0x12345600
+#define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_CHANNELS 8
+
+enum rtlx_state {
+ RTLX_STATE_UNUSED = 0,
+ RTLX_STATE_INITIALISED,
+ RTLX_STATE_REMOTE_READY,
+ RTLX_STATE_OPENED
+};
+
+#define RTLX_BUFFER_SIZE 1024
+/* each channel supports read and write.
+ linux (vpe0) reads lx_buffer and writes rt_buffer
+ SP (vpe1) reads rt_buffer and writes lx_buffer
+*/
+typedef struct rtlx_channel {
+ enum rtlx_state rt_state;
+ enum rtlx_state lx_state;
+
+ int buffer_size;
+
+ /* read and write indexes per buffer */
+ int rt_write, rt_read;
+ char *rt_buffer;
+
+ int lx_write, lx_read;
+ char *lx_buffer;
+
+ void *queues;
+
+} rtlx_channel_t;
+
+typedef struct rtlx_info {
+ unsigned long id;
+ enum rtlx_state state;
+
+ struct rtlx_channel channel[RTLX_CHANNELS];
+
+} rtlx_info_t;
+
+#endif
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 4eed8e2a..e796d75 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -52,16 +52,6 @@
#define JAZZ_SERIAL_PORT_DEFNS
#endif
-#ifdef CONFIG_MIPS_COBALT
-#include <asm/cobalt/cobalt.h>
-#define COBALT_BASE_BAUD (18432000 / 16)
-#define COBALT_SERIAL_PORT_DEFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */
-#else
-#define COBALT_SERIAL_PORT_DEFNS
-#endif
-
/*
* Both Galileo boards have the same UART mappings.
*/
@@ -113,17 +103,6 @@
#define IVR_SERIAL_PORT_DEFNS
#endif
-#ifdef CONFIG_TOSHIBA_JMR3927
-#include <asm/jmr3927/jmr3927.h>
-#define TXX927_SERIAL_PORT_DEFNS \
- { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \
- .flags = UART0_FLAGS, .type = 1 }, \
- { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \
- .flags = UART1_FLAGS, .type = 1 },
-#else
-#define TXX927_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_SERIAL_AU1X00
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_SOC_AU1000
@@ -227,9 +206,9 @@
#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
- { baud_base: JAGUAR_ATX_BASE_BAUD, irq: int, \
- flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
- iomem_base: (u8 *) base, iomem_reg_shift: 2, \
+ { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \
+ .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
io_type: SERIAL_IO_MEM }
#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
_JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
@@ -243,9 +222,9 @@
#define OCELOT_3_SERIAL_BASE (signed)0xfd000020
#define _OCELOT_3_SERIAL_INIT(int, base) \
- { baud_base: OCELOT_3_BASE_BAUD, irq: int, \
- flags: STD_COM_FLAGS, \
- iomem_base: (u8 *) base, iomem_reg_shift: 2, \
+ { .baud_base = OCELOT_3_BASE_BAUD, irq: int, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
io_type: SERIAL_IO_MEM }
#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
@@ -342,7 +321,6 @@
#endif /* CONFIG_SGI_IP32 */
#define SERIAL_PORT_DFNS \
- COBALT_SERIAL_PORT_DEFNS \
DDB5477_SERIAL_PORT_DEFNS \
EV96100_SERIAL_PORT_DEFNS \
IP32_SERIAL_PORT_DEFNS \
@@ -354,7 +332,6 @@
MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
- TXX927_SERIAL_PORT_DEFNS \
AU1000_SERIAL_PORT_DEFNS
#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h
new file mode 100644
index 0000000..42d4cf0
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_int.h
@@ -0,0 +1,310 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Interrupt Mapper definitions File: bcm1480_int.h
+ *
+ * This module contains constants for manipulating the
+ * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and
+ * definitions for the interrupt sources.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_INT_H
+#define _BCM1480_INT_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Interrupt Mapper Constants
+ ********************************************************************* */
+
+/*
+ * The interrupt mapper deals with 128-bit logical registers that are
+ * implemented as pairs of 64-bit registers, with the "low" 64 bits in
+ * a register that has an address 0x1000 higher(!) than the
+ * corresponding "high" register.
+ *
+ * For appropriate registers, bit 0 of the "high" register is a
+ * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low"
+ * register.
+ */
+
+/*
+ * This entire file uses _BCM1480_ in all the symbols because it is
+ * entirely BCM1480 specific.
+ */
+
+/*
+ * Interrupt sources (Table 22)
+ */
+
+#define K_BCM1480_INT_SOURCES 128
+
+#define _BCM1480_INT_HIGH(k) (k)
+#define _BCM1480_INT_LOW(k) ((k)+64)
+
+#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63)
+
+#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63)
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6)
+
+#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+
+#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+
+/*
+ * Interrupt mappings (Table 18)
+ */
+
+#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1 1
+#define K_BCM1480_INT_MAP_I2 2
+#define K_BCM1480_INT_MAP_I3 3
+#define K_BCM1480_INT_MAP_I4 4
+#define K_BCM1480_INT_MAP_I5 5
+#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */
+
+/*
+ * Interrupt LDT Set Register (Table 19)
+ */
+
+#define S_BCM1480_INT_HT_INTMSG 0
+#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3,S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_INTMSG,M_BCM1480_INT_HT_INTMSG)
+
+#define K_BCM1480_INT_HT_INTMSG_FIXED 0
+#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1
+#define K_BCM1480_INT_HT_INTMSG_SMI 2
+#define K_BCM1480_INT_HT_INTMSG_NMI 3
+#define K_BCM1480_INT_HT_INTMSG_INIT 4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP 5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT 6
+#define K_BCM1480_INT_HT_INTMSG_RESERVED 7
+
+#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER 0
+#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE
+
+#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST 0
+#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE
+
+#define S_BCM1480_INT_HT_INTDEST 5
+#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8,S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_INTDEST,M_BCM1480_INT_HT_INTDEST)
+
+#define S_BCM1480_INT_HT_VECTOR 13
+#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8,S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_VECTOR,M_BCM1480_INT_HT_VECTOR)
+
+/*
+ * Vector prefix (Table 4-7)
+ */
+
+#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00
+#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40
+#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80
+#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0
+
+#endif /* _BCM1480_INT_H */
diff --git a/include/asm-mips/sibyte/bcm1480_l2c.h b/include/asm-mips/sibyte/bcm1480_l2c.h
new file mode 100644
index 0000000..886b099
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_l2c.h
@@ -0,0 +1,176 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * L2 Cache constants and macros File: bcm1480_l2c.h
+ *
+ * This module contains constants useful for manipulating the
+ * level 2 cache.
+ *
+ * BCM1400 specification level: 1280-UM100-D2 (11/14/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_L2C_H
+#define _BCM1480_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Format of level 2 cache management address (Table 55)
+ */
+
+#define S_BCM1480_L2C_MGMT_INDEX 5
+#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12,S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_INDEX,M_BCM1480_L2C_MGMT_INDEX)
+
+#define S_BCM1480_L2C_MGMT_WAY 17
+#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3,S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_WAY,M_BCM1480_L2C_MGMT_WAY)
+
+#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21)
+
+#define S_BCM1480_L2C_MGMT_ECC_DIAG 22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2,S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_ECC_DIAG,M_BCM1480_L2C_MGMT_ECC_DIAG)
+
+#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000
+
+#define BCM1480_L2C_ENTRIES_PER_WAY 4096
+#define BCM1480_L2C_NUM_WAYS 8
+
+
+/*
+ * Level 2 Cache Tag register (Table 59)
+ */
+
+#define S_BCM1480_L2C_TAG_MBZ 0
+#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5,S_BCM1480_L2C_TAG_MBZ)
+
+#define S_BCM1480_L2C_TAG_INDEX 5
+#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12,S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_INDEX,M_BCM1480_L2C_TAG_INDEX)
+
+/* Note that index bit 16 is also tag bit 40 */
+#define S_BCM1480_L2C_TAG_TAG 17
+#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23,S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_TAG,M_BCM1480_L2C_TAG_TAG)
+
+#define S_BCM1480_L2C_TAG_ECC 40
+#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6,S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_ECC,M_BCM1480_L2C_TAG_ECC)
+
+#define S_BCM1480_L2C_TAG_WAY 46
+#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3,S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_WAY,M_BCM1480_L2C_TAG_WAY)
+
+#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50)
+
+#define S_BCM1480_L2C_DATA_ECC 51
+#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10,S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x,S_BCM1480_L2C_DATA_ECC,M_BCM1480_L2C_DATA_ECC)
+
+
+/*
+ * L2 Misc0 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_REMOTE,M_BCM1480_L2C_MISC0_WAY_REMOTE)
+
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_LOCAL,M_BCM1480_L2C_MISC0_WAY_LOCAL)
+
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_ENABLE,M_BCM1480_L2C_MISC0_WAY_ENABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24
+#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2,S_BCM1480_L2C_MISC0_CACHE_DISABLE)
+#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_CACHE_DISABLE,M_BCM1480_L2C_MISC0_CACHE_DISABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2,S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_CACHE_QUAD,M_BCM1480_L2C_MISC0_CACHE_QUAD)
+
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+
+
+/*
+ * L2 Misc1 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_0,M_BCM1480_L2C_MISC1_WAY_AGENT_0)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_1,M_BCM1480_L2C_MISC1_WAY_AGENT_1)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_2,M_BCM1480_L2C_MISC1_WAY_AGENT_2)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_3,M_BCM1480_L2C_MISC1_WAY_AGENT_3)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_4,M_BCM1480_L2C_MISC1_WAY_AGENT_4)
+
+
+/*
+ * L2 Misc2 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_8,M_BCM1480_L2C_MISC2_WAY_AGENT_8)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_9,M_BCM1480_L2C_MISC2_WAY_AGENT_9)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_A,M_BCM1480_L2C_MISC2_WAY_AGENT_A)
+
+
+#endif /* _BCM1480_L2C_H */
diff --git a/include/asm-mips/sibyte/bcm1480_mc.h b/include/asm-mips/sibyte/bcm1480_mc.h
new file mode 100644
index 0000000..6bdc941
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_mc.h
@@ -0,0 +1,962 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Memory Controller constants File: bcm1480_mc.h
+ *
+ * This module contains constants and macros useful for
+ * programming the memory controller.
+ *
+ * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_MC_H
+#define _BCM1480_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Configuration Register (Table 81)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV0,M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV1,M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0)
+
+#define S_BCM1480_MC_INTLV2 16
+#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV2,M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0)
+
+#define S_BCM1480_MC_CS_MODE 32
+#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8,S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_CS_MODE,M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0)
+
+#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \
+ V_BCM1480_MC_INTLV1_DEFAULT | \
+ V_BCM1480_MC_INTLV2_DEFAULT | \
+ V_BCM1480_MC_CS_MODE_DEFAULT)
+
+#define K_BCM1480_MC_CS01_MODE 0x03
+#define K_BCM1480_MC_CS02_MODE 0x05
+#define K_BCM1480_MC_CS0123_MODE 0x0F
+#define K_BCM1480_MC_CS0246_MODE 0x55
+#define K_BCM1480_MC_CS0145_MODE 0x33
+#define K_BCM1480_MC_CS0167_MODE 0xC3
+#define K_BCM1480_MC_CSFULL_MODE 0xFF
+
+/*
+ * Chip Select Start Address Register (Table 82)
+ */
+
+#define S_BCM1480_MC_CS0_START 0
+#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12,S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0_START,M_BCM1480_MC_CS0_START)
+
+#define S_BCM1480_MC_CS1_START 16
+#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12,S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS1_START,M_BCM1480_MC_CS1_START)
+
+#define S_BCM1480_MC_CS2_START 32
+#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12,S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS2_START,M_BCM1480_MC_CS2_START)
+
+#define S_BCM1480_MC_CS3_START 48
+#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12,S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS3_START,M_BCM1480_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 83)
+ */
+
+#define S_BCM1480_MC_CS0_END 0
+#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12,S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0_END,M_BCM1480_MC_CS0_END)
+
+#define S_BCM1480_MC_CS1_END 16
+#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12,S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS1_END,M_BCM1480_MC_CS1_END)
+
+#define S_BCM1480_MC_CS2_END 32
+#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12,S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS2_END,M_BCM1480_MC_CS2_END)
+
+#define S_BCM1480_MC_CS3_END 48
+#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12,S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS3_END,M_BCM1480_MC_CS3_END)
+
+/*
+ * Row Address Bit Select Register 0 (Table 84)
+ */
+
+#define S_BCM1480_MC_ROW00 0
+#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6,S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW00,M_BCM1480_MC_ROW00)
+
+#define S_BCM1480_MC_ROW01 8
+#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6,S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW01,M_BCM1480_MC_ROW01)
+
+#define S_BCM1480_MC_ROW02 16
+#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6,S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW02,M_BCM1480_MC_ROW02)
+
+#define S_BCM1480_MC_ROW03 24
+#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6,S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW03,M_BCM1480_MC_ROW03)
+
+#define S_BCM1480_MC_ROW04 32
+#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6,S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW04,M_BCM1480_MC_ROW04)
+
+#define S_BCM1480_MC_ROW05 40
+#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6,S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW05,M_BCM1480_MC_ROW05)
+
+#define S_BCM1480_MC_ROW06 48
+#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6,S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW06,M_BCM1480_MC_ROW06)
+
+#define S_BCM1480_MC_ROW07 56
+#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6,S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW07,M_BCM1480_MC_ROW07)
+
+/*
+ * Row Address Bit Select Register 1 (Table 85)
+ */
+
+#define S_BCM1480_MC_ROW08 0
+#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6,S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW08,M_BCM1480_MC_ROW08)
+
+#define S_BCM1480_MC_ROW09 8
+#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6,S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW09,M_BCM1480_MC_ROW09)
+
+#define S_BCM1480_MC_ROW10 16
+#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6,S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW10,M_BCM1480_MC_ROW10)
+
+#define S_BCM1480_MC_ROW11 24
+#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6,S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW11,M_BCM1480_MC_ROW11)
+
+#define S_BCM1480_MC_ROW12 32
+#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6,S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW12,M_BCM1480_MC_ROW12)
+
+#define S_BCM1480_MC_ROW13 40
+#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6,S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW13,M_BCM1480_MC_ROW13)
+
+#define S_BCM1480_MC_ROW14 48
+#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6,S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW14,M_BCM1480_MC_ROW14)
+
+#define K_BCM1480_MC_ROWX_BIT_SPACING 8
+
+/*
+ * Column Address Bit Select Register 0 (Table 86)
+ */
+
+#define S_BCM1480_MC_COL00 0
+#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6,S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x,S_BCM1480_MC_COL00,M_BCM1480_MC_COL00)
+
+#define S_BCM1480_MC_COL01 8
+#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6,S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x,S_BCM1480_MC_COL01,M_BCM1480_MC_COL01)
+
+#define S_BCM1480_MC_COL02 16
+#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6,S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x,S_BCM1480_MC_COL02,M_BCM1480_MC_COL02)
+
+#define S_BCM1480_MC_COL03 24
+#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6,S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x,S_BCM1480_MC_COL03,M_BCM1480_MC_COL03)
+
+#define S_BCM1480_MC_COL04 32
+#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6,S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x,S_BCM1480_MC_COL04,M_BCM1480_MC_COL04)
+
+#define S_BCM1480_MC_COL05 40
+#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6,S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x,S_BCM1480_MC_COL05,M_BCM1480_MC_COL05)
+
+#define S_BCM1480_MC_COL06 48
+#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6,S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x,S_BCM1480_MC_COL06,M_BCM1480_MC_COL06)
+
+#define S_BCM1480_MC_COL07 56
+#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6,S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x,S_BCM1480_MC_COL07,M_BCM1480_MC_COL07)
+
+/*
+ * Column Address Bit Select Register 1 (Table 87)
+ */
+
+#define S_BCM1480_MC_COL08 0
+#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6,S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x,S_BCM1480_MC_COL08,M_BCM1480_MC_COL08)
+
+#define S_BCM1480_MC_COL09 8
+#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6,S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x,S_BCM1480_MC_COL09,M_BCM1480_MC_COL09)
+
+#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */
+
+#define S_BCM1480_MC_COL11 24
+#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6,S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x,S_BCM1480_MC_COL11,M_BCM1480_MC_COL11)
+
+#define S_BCM1480_MC_COL12 32
+#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6,S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x,S_BCM1480_MC_COL12,M_BCM1480_MC_COL12)
+
+#define S_BCM1480_MC_COL13 40
+#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6,S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x,S_BCM1480_MC_COL13,M_BCM1480_MC_COL13)
+
+#define S_BCM1480_MC_COL14 48
+#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6,S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x,S_BCM1480_MC_COL14,M_BCM1480_MC_COL14)
+
+#define K_BCM1480_MC_COLX_BIT_SPACING 8
+
+/*
+ * CS0 and CS1 Bank Address Bit Select Register (Table 88)
+ */
+
+#define S_BCM1480_MC_CS01_BANK0 0
+#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK0,M_BCM1480_MC_CS01_BANK0)
+
+#define S_BCM1480_MC_CS01_BANK1 8
+#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK1,M_BCM1480_MC_CS01_BANK1)
+
+#define S_BCM1480_MC_CS01_BANK2 16
+#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK2,M_BCM1480_MC_CS01_BANK2)
+
+/*
+ * CS2 and CS3 Bank Address Bit Select Register (Table 89)
+ */
+
+#define S_BCM1480_MC_CS23_BANK0 0
+#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK0,M_BCM1480_MC_CS23_BANK0)
+
+#define S_BCM1480_MC_CS23_BANK1 8
+#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK1,M_BCM1480_MC_CS23_BANK1)
+
+#define S_BCM1480_MC_CS23_BANK2 16
+#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK2,M_BCM1480_MC_CS23_BANK2)
+
+#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8
+
+/*
+ * DRAM Command Register (Table 90)
+ */
+
+#define S_BCM1480_MC_COMMAND 0
+#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4,S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x,S_BCM1480_MC_COMMAND,M_BCM1480_MC_COMMAND)
+
+#define K_BCM1480_MC_COMMAND_EMRS 0
+#define K_BCM1480_MC_COMMAND_MRS 1
+#define K_BCM1480_MC_COMMAND_PRE 2
+#define K_BCM1480_MC_COMMAND_AR 3
+#define K_BCM1480_MC_COMMAND_SETRFSH 4
+#define K_BCM1480_MC_COMMAND_CLRRFSH 5
+#define K_BCM1480_MC_COMMAND_SETPWRDN 6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN 7
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_COMMAND_EMRS2 8
+#define K_BCM1480_MC_COMMAND_EMRS3 9
+#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10
+#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11
+#endif
+
+#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
+#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
+#endif
+
+#define S_BCM1480_MC_CS0 4
+#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11)
+
+#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16)
+
+/*
+ * DRAM Mode Register (Table 91)
+ */
+
+#define S_BCM1480_MC_EMODE 0
+#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15,S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x,S_BCM1480_MC_EMODE,M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0)
+
+#define S_BCM1480_MC_MODE 16
+#define M_BCM1480_MC_MODE _SB_MAKEMASK(15,S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_MODE,M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0)
+
+#define S_BCM1480_MC_DRAM_TYPE 32
+#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4,S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x,S_BCM1480_MC_DRAM_TYPE,M_BCM1480_MC_DRAM_TYPE)
+
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_DRAM_TYPE_DDR2 2
+#endif
+
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
+#endif
+
+#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39)
+
+#define S_BCM1480_MC_PG_POLICY 40
+#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2,S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x,S_BCM1480_MC_PG_POLICY,M_BCM1480_MC_PG_POLICY)
+
+#define K_BCM1480_MC_PG_POLICY_CLOSED 0
+#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
+
+#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42)
+#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43)
+#endif
+
+#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
+ V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+/*
+ * Memory Clock Configuration Register (Table 92)
+ */
+
+#define S_BCM1480_MC_CLK_RATIO 0
+#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6,S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x,S_BCM1480_MC_CLK_RATIO,M_BCM1480_MC_CLK_RATIO)
+
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10)
+
+#define S_BCM1480_MC_REF_RATE 8
+#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8,S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x,S_BCM1480_MC_REF_RATE,M_BCM1480_MC_REF_RATE)
+
+#define K_BCM1480_MC_REF_RATE_100MHz 0x31
+#define K_BCM1480_MC_REF_RATE_200MHz 0x62
+#define K_BCM1480_MC_REF_RATE_400MHz 0xC4
+
+#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16)
+#endif
+
+/*
+ * ODT Register (Table 99)
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0)
+#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1)
+#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2)
+#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3)
+#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12)
+#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13)
+#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14)
+#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15)
+#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17)
+#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18)
+#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19)
+#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20)
+#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21)
+#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22)
+#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23)
+#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24)
+#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25)
+#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26)
+#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27)
+#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28)
+#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32)
+#endif
+
+/*
+ * Memory DLL Configuration Register (Table 93)
+ */
+
+#define S_BCM1480_MC_ADDR_COARSE_ADJ 0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_COARSE_ADJ,M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE 8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_FREQ_RANGE,M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_ADDR_FINE_ADJ 8
+#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_FINE_ADJ,M_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQI_COARSE_ADJ 16
+#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_COARSE_ADJ,M_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQI_FREQ_RANGE 24
+#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_FREQ_RANGE,M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQI_FINE_ADJ 24
+#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_FINE_ADJ,M_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQO_COARSE_ADJ 32
+#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_COARSE_ADJ,M_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQO_FREQ_RANGE 40
+#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_FREQ_RANGE,M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQO_FINE_ADJ 40
+#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_FINE_ADJ,M_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_PDSEL 44
+#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_PDSEL,M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0)
+
+#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46)
+#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47)
+#endif
+
+#define S_BCM1480_MC_DLL_DEFAULT 48
+#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_REGCTRL 54
+#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_REGCTRL,M_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0)
+#endif
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_FREQ_RANGE 56
+#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_FREQ_RANGE,M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DLL_STEP_SIZE 56
+#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4,S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_STEP_SIZE,M_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_BGCTRL 60
+#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_BGCTRL,M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0)
+#endif
+
+#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63)
+
+/*
+ * Memory Drive Configuration Register (Table 94)
+ */
+
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3,S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_RTT_BYP_PULLDOWN,M_BCM1480_MC_RTT_BYP_PULLDOWN)
+
+#define S_BCM1480_MC_RTT_BYP_PULLUP 6
+#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3,S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_RTT_BYP_PULLUP,M_BCM1480_MC_RTT_BYP_PULLUP)
+
+#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10
+#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN,M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLUP,M_BCM1480_MC_PVT_BYP_C1_PULLUP)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20
+#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN,M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLUP,M_BCM1480_MC_PVT_BYP_C2_PULLUP)
+
+#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36)
+
+#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41)
+
+/*
+ * ECC Test Data Register (Table 95)
+ */
+
+#define S_BCM1480_MC_DATA_INVERT 0
+#define M_DATA_ECC_INVERT _SB_MAKEMASK(64,S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * ECC Test ECC Register (Table 96)
+ */
+
+#define S_BCM1480_MC_ECC_INVERT 0
+#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8,S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * SDRAM Timing Register (Table 97)
+ */
+
+#define S_BCM1480_MC_tRCD 0
+#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4,S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCD,M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT 3
+#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+
+#define S_BCM1480_MC_tCL 4
+#define M_BCM1480_MC_tCL _SB_MAKEMASK(4,S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x,S_BCM1480_MC_tCL,M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT 2
+#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+
+#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8)
+
+#define S_BCM1480_MC_tWR 9
+#define M_BCM1480_MC_tWR _SB_MAKEMASK(3,S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x,S_BCM1480_MC_tWR,M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT 2
+#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+
+#define S_BCM1480_MC_tCwD 12
+#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4,S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x,S_BCM1480_MC_tCwD,M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT 1
+#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+
+#define S_BCM1480_MC_tRP 16
+#define M_BCM1480_MC_tRP _SB_MAKEMASK(4,S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRP,M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT 4
+#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+
+#define S_BCM1480_MC_tRRD 20
+#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4,S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x,S_BCM1480_MC_tRRD,M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT 2
+#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+
+#define S_BCM1480_MC_tRCw 24
+#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5,S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCw,M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT 10
+#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+
+#define S_BCM1480_MC_tRCr 32
+#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5,S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCr,M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT 9
+#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_tFAW 40
+#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6,S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x,S_BCM1480_MC_tFAW,M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT 0
+#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#endif
+
+#define S_BCM1480_MC_tRFC 48
+#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7,S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x,S_BCM1480_MC_tRFC,M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT 12
+#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+
+#define S_BCM1480_MC_tFIFO 56
+#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2,S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x,S_BCM1480_MC_tFIFO,M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT 0
+#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+
+#define S_BCM1480_MC_tW2R 58
+#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2,S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x,S_BCM1480_MC_tW2R,M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT 1
+#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+
+#define S_BCM1480_MC_tR2W 60
+#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2,S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x,S_BCM1480_MC_tR2W,M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT 0
+#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+
+#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62)
+
+#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \
+ V_BCM1480_MC_tFIFO_DEFAULT | \
+ V_BCM1480_MC_tR2W_DEFAULT | \
+ V_BCM1480_MC_tW2R_DEFAULT | \
+ V_BCM1480_MC_tRFC_DEFAULT | \
+ V_BCM1480_MC_tRCr_DEFAULT | \
+ V_BCM1480_MC_tRCw_DEFAULT | \
+ V_BCM1480_MC_tRRD_DEFAULT | \
+ V_BCM1480_MC_tRP_DEFAULT | \
+ V_BCM1480_MC_tCwD_DEFAULT | \
+ V_BCM1480_MC_tWR_DEFAULT | \
+ M_BCM1480_MC_tCrDh | \
+ V_BCM1480_MC_tCL_DEFAULT | \
+ V_BCM1480_MC_tRCD_DEFAULT)
+
+/*
+ * SDRAM Timing Register 2
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+
+#define S_BCM1480_MC_tAL 0
+#define M_BCM1480_MC_tAL _SB_MAKEMASK(4,S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x,S_BCM1480_MC_tAL,M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT 0
+#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+
+#define S_BCM1480_MC_tRTP 4
+#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3,S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRTP,M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT 2
+#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+
+#define S_BCM1480_MC_tW2W 8
+#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2,S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x,S_BCM1480_MC_tW2W,M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT 0
+#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+
+#define S_BCM1480_MC_tRAP 12
+#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4,S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRAP,M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT 0
+#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+
+#endif
+
+
+
+/*
+ * Global Registers: single instances per BCM1480
+ */
+
+/*
+ * Global Configuration Register (Table 99)
+ */
+
+#define S_BCM1480_MC_BLK_SET_MARK 8
+#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4,S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x,S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x,S_BCM1480_MC_BLK_SET_MARK,M_BCM1480_MC_BLK_SET_MARK)
+
+#define S_BCM1480_MC_BLK_CLR_MARK 12
+#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4,S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x,S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x,S_BCM1480_MC_BLK_CLR_MARK,M_BCM1480_MC_BLK_CLR_MARK)
+
+#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16)
+
+#define S_BCM1480_MC_MAX_AGE 20
+#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4,S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x,S_BCM1480_MC_MAX_AGE,M_BCM1480_MC_MAX_AGE)
+
+#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_SLEW 33
+#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2,S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x,S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x,S_BCM1480_MC_SLEW,M_BCM1480_MC_SLEW)
+
+#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35)
+
+/*
+ * Global Channel Interleave Register (Table 100)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV0,M_BCM1480_MC_INTLV0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV1,M_BCM1480_MC_INTLV1)
+
+#define S_BCM1480_MC_INTLV_MODE 16
+#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3,S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV_MODE,M_BCM1480_MC_INTLV_MODE)
+
+#define K_BCM1480_MC_INTLV_MODE_NONE 0x0
+#define K_BCM1480_MC_INTLV_MODE_01 0x1
+#define K_BCM1480_MC_INTLV_MODE_23 0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23 0x3
+#define K_BCM1480_MC_INTLV_MODE_0123 0x4
+
+#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+
+/*
+ * ECC Status Register
+ */
+
+#define S_BCM1480_MC_ECC_ERR_ADDR 0
+#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37,S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_ERR_ADDR,M_BCM1480_MC_ECC_ERR_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60)
+#endif
+
+#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63)
+
+/*
+ * Global ECC Address Register (Table 102)
+ */
+
+#define S_BCM1480_MC_ECC_CORR_ADDR 0
+#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37,S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_CORR_ADDR,M_BCM1480_MC_ECC_CORR_ADDR)
+
+/*
+ * Global ECC Correction Register (Table 103)
+ */
+
+#define S_BCM1480_MC_ECC_CORRECT 0
+#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64,S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_CORRECT,M_BCM1480_MC_ECC_CORRECT)
+
+/*
+ * Global ECC Performance Counters Control Register (Table 104)
+ */
+
+#define S_BCM1480_MC_CHANNEL_SELECT 0
+#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4,S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x,S_BCM1480_MC_CHANNEL_SELECT,M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8
+
+#endif /* _BCM1480_MC_H */
diff --git a/include/asm-mips/sibyte/bcm1480_regs.h b/include/asm-mips/sibyte/bcm1480_regs.h
new file mode 100644
index 0000000..c2dd2fe
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_regs.h
@@ -0,0 +1,869 @@
+/* *********************************************************************
+ * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
+ *
+ * Register Definitions File: bcm1480_regs.h
+ *
+ * This module contains the addresses of the on-chip peripherals
+ * on the BCM1280 and BCM1480.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_REGS_H
+#define _BCM1480_REGS_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's registers since a great deal of the 1480's
+ * functions are the same as the BCM1250.
+ ********************************************************************* */
+
+#include "sb1250_regs.h"
+
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * Register addresses are grouped by function and follow the order
+ * of the User Manual.
+ *
+ * For the most part, when there is more than one peripheral
+ * of the same type on the SOC, the constants below will be
+ * offsets from the base of each peripheral. For example,
+ * the MAC registers are described as offsets from the first
+ * MAC register, and there will be a MAC_REGISTER() macro
+ * to calculate the base address of a given MAC.
+ *
+ * The information in this file is based on the BCM1X55/BCM1X80
+ * User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+
+/* *********************************************************************
+ * Memory Controller Registers (Section 6)
+ ********************************************************************* */
+
+#define A_BCM1480_MC_BASE_0 0x0010050000
+#define A_BCM1480_MC_BASE_1 0x0010051000
+#define A_BCM1480_MC_BASE_2 0x0010052000
+#define A_BCM1480_MC_BASE_3 0x0010053000
+#define BCM1480_MC_REGISTER_SPACING 0x1000
+
+#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_REGISTER(ctlid,reg) (A_BCM1480_MC_BASE(ctlid)+(reg))
+
+#define R_BCM1480_MC_CONFIG 0x0000000100
+#define R_BCM1480_MC_CS_START 0x0000000120
+#define R_BCM1480_MC_CS_END 0x0000000140
+#define S_BCM1480_MC_CS_STARTEND 24
+
+#define R_BCM1480_MC_CS01_ROW0 0x0000000180
+#define R_BCM1480_MC_CS01_ROW1 0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0 0x0000000200
+#define R_BCM1480_MC_CS23_ROW1 0x0000000220
+#define R_BCM1480_MC_CS01_COL0 0x0000000280
+#define R_BCM1480_MC_CS01_COL1 0x00000002A0
+#define R_BCM1480_MC_CS23_COL0 0x0000000300
+#define R_BCM1480_MC_CS23_COL1 0x0000000320
+
+#define R_BCM1480_MC_CSX_BASE 0x0000000180
+#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */
+
+#define R_BCM1480_MC_CS01_BA 0x0000000380
+#define R_BCM1480_MC_CS23_BA 0x00000003A0
+#define R_BCM1480_MC_DRAMCMD 0x0000000400
+#define R_BCM1480_MC_DRAMMODE 0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG 0x0000000440
+#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA 0x0000000480
+#define R_BCM1480_MC_TEST_ECC 0x00000004A0
+#define R_BCM1480_MC_TIMING1 0x00000004C0
+#define R_BCM1480_MC_TIMING2 0x00000004E0
+#define R_BCM1480_MC_DLL_CFG 0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG 0x0000000520
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define R_BCM1480_MC_ODT 0x0000000460
+#define R_BCM1480_MC_ECC_STATUS 0x0000000540
+#endif
+
+/* Global registers (single instance) */
+#define A_BCM1480_MC_GLB_CONFIG 0x0010054100
+#define A_BCM1480_MC_GLB_INTLV 0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180
+#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0
+
+/* *********************************************************************
+ * L2 Cache Control Registers (Section 5)
+ ********************************************************************* */
+
+#define A_BCM1480_L2_BASE 0x0010040000
+
+#define A_BCM1480_L2_READ_TAG 0x0010040018
+#define A_BCM1480_L2_ECC_TAG 0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE 0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE 0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE 0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */
+#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */
+#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8))
+#define A_BCM1480_L2_BANK_BASE 0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000
+
+
+/* *********************************************************************
+ * PCI-X Interface Registers (Section 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PCI_BASE 0x0010061400
+
+#define A_BCM1480_PCI_RESET 0x0010061400
+#define A_BCM1480_PCI_DLL 0x0010061500
+
+#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000
+
+/* *********************************************************************
+ * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
+ ********************************************************************* */
+
+/* No register changes with Rev.C BCM1250, but one additional MAC */
+
+#define A_BCM1480_MAC_BASE_2 0x0010066000
+
+#ifndef A_MAC_BASE_2
+#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2
+#endif
+
+#define A_BCM1480_MAC_BASE_3 0x0010067000
+#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3
+
+#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038
+
+#ifndef R_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST
+#endif
+
+
+/* *********************************************************************
+ * DUART Registers (Section 14)
+ ********************************************************************* */
+
+/* No significant differences from BCM1250, two DUARTs */
+
+/* Conventions, per user manual:
+ * DUART generic, channels A,B,C,D
+ * DUART0 implementing channels A,B
+ * DUART1 inplementing channels C,D
+ */
+
+#define BCM1480_DUART_NUM_PORTS 4
+
+#define A_BCM1480_DUART0 0x0010060000
+#define A_BCM1480_DUART1 0x0010060400
+#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+
+#define BCM1480_DUART_CHANREG_SPACING 0x100
+#define A_BCM1480_DUART_CHANREG(chan,reg) (A_BCM1480_DUART(chan) \
+ + BCM1480_DUART_CHANREG_SPACING*((chan)&1) \
+ + (reg))
+#define R_BCM1480_DUART_CHANREG(chan,reg) (BCM1480_DUART_CHANREG_SPACING*((chan)&1) + (reg))
+
+#define R_BCM1480_DUART_IMRREG(chan) (R_DUART_IMR_A + ((chan)&1)*DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan) (R_DUART_ISR_A + ((chan)&1)*DUART_IMRISR_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
+#define A_BCM1480_DUART_ISRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410
+#define A_BCM1480_DUART_STATUS_C 0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440
+#define A_BCM1480_DUART_CMD_C 0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470
+#define A_BCM1480_DUART_OPCR_C 0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490
+
+#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510
+#define A_BCM1480_DUART_STATUS_D 0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540
+#define A_BCM1480_DUART_CMD_D 0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570
+#define A_BCM1480_DUART_OPCR_D 0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590
+
+#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610
+#define A_BCM1480_DUART_ISR_C 0x0010060620
+#define A_BCM1480_DUART_IMR_C 0x0010060630
+#define A_BCM1480_DUART_ISR_D 0x0010060640
+#define A_BCM1480_DUART_IMR_D 0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660
+#define A_BCM1480_DUART_OPCR_CD 0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680
+#define A_BCM1480_DUART_ISR_CD 0x0010060690
+#define A_BCM1480_DUART_IMR_CD 0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0
+
+
+/* *********************************************************************
+ * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
+ ********************************************************************* */
+
+#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58
+#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68
+
+/* *********************************************************************
+ * GPIO Registers (Section 17)
+ ********************************************************************* */
+
+/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
+
+#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE (-8)
+
+#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE
+#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE
+
+/* *********************************************************************
+ * SMBus Registers (Section 18)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * Timer Registers (Sections 4.6)
+ ********************************************************************* */
+
+/* BCM1480 has two additional watchdogs */
+
+/* Watchdog timers */
+
+#define A_BCM1480_SCD_WDOG_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_3 0x0010022150
+
+#define BCM1480_SCD_NUM_WDOGS 4
+
+#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_REGISTER(w,r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
+
+#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060
+
+#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160
+
+/* BCM1480 has two additional compare registers */
+
+#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18
+
+/* *********************************************************************
+ * System Control Registers (Section 4.2)
+ ********************************************************************* */
+
+/* Scratch register in different place */
+
+#define A_BCM1480_SCD_SCRATCH 0x100200A0
+
+/* *********************************************************************
+ * System Address Trap Registers (Section 4.9)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * System Interrupt Mapper Registers (Sections 4.3-4.5)
+ ********************************************************************* */
+
+#define A_BCM1480_IMR_CPU0_BASE 0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE 0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE 0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE 0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING 0x2000
+#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13
+
+#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_REGISTER(cpu,reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
+
+/* Most IMR registers are 128 bits, implemented as non-contiguous
+ 64-bit registers high (_H) and low (_L) */
+#define BCM1480_IMR_HL_SPACING 0x1000
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
+ (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu,reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
+
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */
+
+/* *********************************************************************
+ * System Performance Counter Registers (Section 4.7)
+ ********************************************************************* */
+
+/* BCM1480 has four more performance counter registers, and two control
+ registers. */
+
+#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0
+
+#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1
+
+#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3
+
+#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
+
+/* *********************************************************************
+ * System Bus Watcher Registers (Section 4.8)
+ ********************************************************************* */
+
+
+/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8
+
+/* *********************************************************************
+ * System Debug Controller Registers (Section 19)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * System Trace Unit Registers (Sections 4.10)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * Data Mover DMA Registers (Section 10.7)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+
+/* *********************************************************************
+ * HyperTransport Interface Registers (Section 8)
+ ********************************************************************* */
+
+#define BCM1480_HT_NUM_PORTS 3
+#define BCM1480_HT_PORT_SPACING 0x800
+#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
+
+#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000
+
+
+/* *********************************************************************
+ * Node Controller Registers (Section 9)
+ ********************************************************************* */
+
+#define A_BCM1480_NC_BASE 0x00DFBD0000
+
+#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0
+
+#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120
+#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140
+
+#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000
+#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020
+#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040
+
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
+
+
+/* *********************************************************************
+ * H&R Block Configuration Registers (Section 12.4)
+ ********************************************************************* */
+
+#define A_BCM1480_HR_BASE_0 0x00DF820000
+#define A_BCM1480_HR_BASE_1 0x00DF8A0000
+#define A_BCM1480_HR_BASE_2 0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx,reg) (A_BCM1480_HR_BASE(idx) + (reg))
+
+#define R_BCM1480_HR_CFG 0x0000000000
+
+#define R_BCM1480_HR_MAPPING 0x0000010010
+
+#define BCM1480_HR_RULE_SPACING 0x0000000010
+#define BCM1480_HR_NUM_RULES 16
+#define BCM1480_HR_OP_OFFSET 0x0000000100
+#define BCM1480_HR_TYPE_OFFSET 0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+
+#define BCM1480_HR_LEAF_SPACING 0x0000000010
+#define BCM1480_HR_NUM_LEAVES 10
+#define BCM1480_HR_LEAF_OFFSET 0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+
+#define R_BCM1480_HR_EX_LEAF0 0x00000003A0
+
+#define BCM1480_HR_PATH_SPACING 0x0000000010
+#define BCM1480_HR_NUM_PATHS 16
+#define BCM1480_HR_PATH_OFFSET 0x0000000600
+#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+
+#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700
+
+#define BCM1480_HR_ROUTE_SPACING 8
+#define BCM1480_HR_NUM_ROUTES 512
+#define BCM1480_HR_ROUTE_OFFSET 0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+
+
+/* checked to here - ehs */
+/* *********************************************************************
+ * Packet Manager DMA Registers (Section 12.5)
+ ********************************************************************* */
+
+#define A_BCM1480_PM_BASE 0x0010056000
+
+#define A_BCM1480_PMI_LCL_0 0x0010058000
+#define A_BCM1480_PMO_LCL_0 0x001005C000
+#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+
+#define BCM1480_PM_LCL_REGISTER_SPACING 0x100
+#define BCM1480_PM_NUM_CHANNELS 32
+
+#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx,reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx,reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+
+#define BCM1480_PM_INT_PACKING 8
+#define BCM1480_PM_INT_FUNCTION_SPACING 0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS 3
+
+/*
+ * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
+ */
+
+#define R_BCM1480_PM_BASE_SIZE 0x0000000000
+#define R_BCM1480_PM_CNT 0x0000000008
+#define R_BCM1480_PM_PFCNT 0x0000000010
+#define R_BCM1480_PM_LAST 0x0000000018
+#define R_BCM1480_PM_PFINDX 0x0000000020
+#define R_BCM1480_PM_INT_WMK 0x0000000028
+#define R_BCM1480_PM_CONFIG0 0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG 0x0000000078
+#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */
+#define R_BCM1480_PM_INT_CNFG 0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */
+
+/*
+ * Global Registers (Not Channelized)
+ */
+
+#define A_BCM1480_PMI_GLB_0 0x0010056000
+#define A_BCM1480_PMO_GLB_0 0x0010057000
+
+/*
+ * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
+ */
+
+#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */
+
+#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
+
+/*
+ * Interrupt mapping registers
+ */
+
+
+#define A_BCM1480_PMI_INT_0 0x0010056800
+#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0 0x0010057800
+#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+
+/*
+ * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
+ */
+
+#define R_BCM1480_PM_INT_ST 0x0000000000
+#define R_BCM1480_PM_INT_MSK 0x0000000040
+#define R_BCM1480_PM_INT_CLR 0x0000000080
+#define R_BCM1480_PM_MRGD_INT 0x00000000C0
+
+/*
+ * Debug registers (global)
+ */
+
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000
+#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000
+#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8
+
+/* *********************************************************************
+ * Switch performance counters
+ ********************************************************************* */
+
+#define A_BCM1480_SWPERF_CFG 0xdfb91800
+#define A_BCM1480_SWPERF_CNT0 0xdfb91880
+#define A_BCM1480_SWPERF_CNT1 0xdfb91888
+#define A_BCM1480_SWPERF_CNT2 0xdfb91890
+#define A_BCM1480_SWPERF_CNT3 0xdfb91898
+
+
+/* *********************************************************************
+ * Switch Trace Unit
+ ********************************************************************* */
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200
+#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208
+#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300
+#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400
+
+#define A_BCM1480_SWTRC_CFG 0xDFB91500
+#define A_BCM1480_SWTRC_READ 0xDFB91508
+
+#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
+#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
+#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
+
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
+
+
+
+/* *********************************************************************
+ * High-Speed Port Registers (Section 13)
+ ********************************************************************* */
+
+#define A_BCM1480_HSP_BASE_0 0x00DF810000
+#define A_BCM1480_HSP_BASE_1 0x00DF890000
+#define A_BCM1480_HSP_BASE_2 0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_REGISTER(idx,reg) (A_BCM1480_HSP_BASE(idx) + (reg))
+
+#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
+
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208
+
+#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808
+#define R_BCM1480_HSP_RX_TEST 0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838
+
+#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870
+
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
+
+/* XXX Following registers were shuffled. Renamed/renumbered per errata. */
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0
+
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
+
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120
+
+#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010
+
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0
+
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8
+
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108
+
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208
+
+#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808
+#define R_BCM1480_HSP_TX_TEST 0x0000040810
+
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878
+
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888
+
+#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+
+
+
+/* *********************************************************************
+ * Physical Address Map (Table 10 and Figure 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000)
+
+
+/* *********************************************************************
+ * L2 Cache as RAM (Table 54)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000)
+
+#endif /* _BCM1480_REGS_H */
diff --git a/include/asm-mips/sibyte/bcm1480_scd.h b/include/asm-mips/sibyte/bcm1480_scd.h
new file mode 100644
index 0000000..648bed9
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_scd.h
@@ -0,0 +1,436 @@
+/* *********************************************************************
+ * BCM1280/BCM1400 Board Support Package
+ *
+ * SCD Constants and Macros File: bcm1480_scd.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the System Control and Debug module.
+ *
+ * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_SCD_H
+#define _BCM1480_SCD_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's SCD since lots of stuff is the same.
+ ********************************************************************* */
+
+#include "sb1250_scd.h"
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+/* *********************************************************************
+ * System control/debug registers
+ ********************************************************************* */
+
+/*
+ * System Identification and Revision Register (Table 12)
+ * Register: SCD_SYSTEM_REVISION
+ * This register is field compatible with the 1250.
+ */
+
+/*
+ * New part definitions
+ */
+
+#define K_SYS_PART_BCM1480 0x1406
+#define K_SYS_PART_BCM1280 0x1206
+#define K_SYS_PART_BCM1455 0x1407
+#define K_SYS_PART_BCM1255 0x1257
+
+/*
+ * Manufacturing Information Register (Table 14)
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+/*
+ * System Configuration Register (Table 15)
+ * Register: SCD_SYSTEM_CFG
+ * Entire register is different from 1250, all new constants below
+ */
+
+#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5)
+
+#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV)
+
+#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV)
+
+#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17)
+
+#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32 0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8 1
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19)
+
+#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SYS_CONFIG 26
+#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG)
+
+#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32,15)
+
+#define S_BCM1480_SYS_NODEID 47
+#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID)
+
+#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0 56
+#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1 57
+#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2 58
+#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3 59
+#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+
+#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63)
+
+/*
+ * Scratch Register (Table 16)
+ * Register: SCD_SYSTEM_SCRATCH
+ * Same as BCM1250
+ */
+
+
+/*
+ * Mailbox Registers (Table 17)
+ * Registers: SCD_MBOX_{0,1}_CPU_x
+ * Same as BCM1250
+ */
+
+
+/*
+ * See bcm1480_int.h for interrupt mapper registers.
+ */
+
+
+/*
+ * Watchdog Timer Initial Count Registers (Table 23)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ *
+ * The watchdogs are almost the same as the 1250, except
+ * the configuration register has more bits to control the
+ * other CPUs.
+ */
+
+
+/*
+ * Watchdog Timer Configuration Registers (Table 25)
+ * Registers: SCD_WDOG_CFG_x
+ */
+
+#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0)
+
+#define S_BCM1480_SCD_WDOG_RESET_TYPE 2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE)
+
+#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT 1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0 3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1 5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2 9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3 17
+#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31
+
+
+#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8)
+
+/*
+ * General Timer Initial Count Registers (Table 26)
+ * Registers: SCD_TIMER_INIT_x
+ *
+ * The timer registers are the same as the BCM1250
+ */
+
+
+/*
+ * ZBbus Count Register (Table 29)
+ * Register: ZBBUS_CYCLE_COUNT
+ *
+ * Same as BCM1250
+ */
+
+/*
+ * ZBbus Compare Registers (Table 30)
+ * Registers: ZBBUS_CYCLE_CPx
+ *
+ * Same as BCM1250
+ */
+
+
+/*
+ * System Performance Counter Configuration Register (Table 31)
+ * Register: PERF_CNT_CFG_0
+ *
+ * Since the clear/enable bits are moved compared to the
+ * 1250 and there are more fields, this register will be BCM1480 specific.
+ */
+
+#define S_BCM1480_SPC_CFG_SRC0 0
+#define M_BCM1480_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0)
+#define V_BCM1480_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0)
+#define G_BCM1480_SPC_CFG_SRC0(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0)
+
+#define S_BCM1480_SPC_CFG_SRC1 8
+#define M_BCM1480_SPC_CFG_SRC1 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1)
+#define V_BCM1480_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1)
+#define G_BCM1480_SPC_CFG_SRC1(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1)
+
+#define S_BCM1480_SPC_CFG_SRC2 16
+#define M_BCM1480_SPC_CFG_SRC2 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2)
+#define V_BCM1480_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2)
+#define G_BCM1480_SPC_CFG_SRC2(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2)
+
+#define S_BCM1480_SPC_CFG_SRC3 24
+#define M_BCM1480_SPC_CFG_SRC3 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3)
+#define V_BCM1480_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3)
+#define G_BCM1480_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3)
+
+#define S_BCM1480_SPC_CFG_SRC4 32
+#define M_BCM1480_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4)
+#define V_BCM1480_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4)
+#define G_BCM1480_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4)
+
+#define S_BCM1480_SPC_CFG_SRC5 40
+#define M_BCM1480_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5)
+#define V_BCM1480_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5)
+#define G_BCM1480_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5)
+
+#define S_BCM1480_SPC_CFG_SRC6 48
+#define M_BCM1480_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6)
+#define V_BCM1480_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6)
+#define G_BCM1480_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6)
+
+#define S_BCM1480_SPC_CFG_SRC7 56
+#define M_BCM1480_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7)
+#define V_BCM1480_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7)
+#define G_BCM1480_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7)
+
+/*
+ * System Performance Counter Control Register (Table 32)
+ * Register: PERF_CNT_CFG_1
+ * BCM1480 specific
+ */
+
+#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1)
+
+/*
+ * System Performance Counters (Table 33)
+ * Registers: PERF_CNT_x
+ */
+
+#define S_BCM1480_SPC_CNT_COUNT 0
+#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT)
+
+#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40)
+
+
+/*
+ * Bus Watcher Error Status Register (Tables 36, 37)
+ * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher Error Data Registers (Table 38)
+ * Registers: BUS_ERR_DATA_x
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher L2 ECC Counter Register (Table 39)
+ * Register: BUS_L2_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Bus Watcher Memory and I/O Error Counter Register (Table 40)
+ * Register: BUS_MEM_IO_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Address Trap Registers
+ *
+ * Register layout same as BCM1250, almost. The bus agents
+ * are different, and the address trap configuration bits are
+ * slightly different.
+ */
+
+#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4,0)
+#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
+
+#define S_BCM1480_ATRAP_CFG_CNT 0
+#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT)
+
+#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3)
+#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6)
+#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7)
+
+#define S_BCM1480_ATRAP_CFG_AGENTID 8
+#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID)
+
+
+#define K_BCM1480_BUS_AGENT_CPU0 0
+#define K_BCM1480_BUS_AGENT_CPU1 1
+#define K_BCM1480_BUS_AGENT_NC 2
+#define K_BCM1480_BUS_AGENT_IOB 3
+#define K_BCM1480_BUS_AGENT_SCD 4
+#define K_BCM1480_BUS_AGENT_L2C 6
+#define K_BCM1480_BUS_AGENT_MC 7
+#define K_BCM1480_BUS_AGENT_CPU2 8
+#define K_BCM1480_BUS_AGENT_CPU3 9
+#define K_BCM1480_BUS_AGENT_PM 10
+
+#define S_BCM1480_ATRAP_CFG_CATTR 12
+#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR)
+
+#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1
+#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2
+#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3
+
+#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14)
+
+
+/*
+ * Trace Event Registers (Table 47)
+ * Same as BCM1250.
+ */
+
+/*
+ * Trace Sequence Control Registers (Table 48)
+ * Registers: TRACE_SEQUENCE_x
+ *
+ * Same as BCM1250 except for two new fields.
+ */
+
+
+#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SCD_TRSEQ_SWFUNC 26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC)
+
+/*
+ * Trace Control Register (Table 49)
+ * Register: TRACE_CFG
+ *
+ * Bits 0..8 are the same as the BCM1250, rest are different.
+ * Entire register is redefined below.
+ */
+
+#define M_BCM1480_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
+#define M_BCM1480_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
+#define M_BCM1480_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
+#define M_BCM1480_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3)
+#define M_BCM1480_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4)
+#define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
+#define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6)
+#define M_BCM1480_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7)
+#define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT _SB_MAKEMASK1(8)
+
+#define S_BCM1480_SCD_TRACE_CFG_MODE 16
+#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE)
+
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2
+
+#define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR 24
+#define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+#define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+#define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+
+#endif /* _BCM1480_SCD_H */
diff --git a/include/asm-mips/sibyte/bigsur.h b/include/asm-mips/sibyte/bigsur.h
new file mode 100644
index 0000000..ebefe79
--- /dev/null
+++ b/include/asm-mips/sibyte/bigsur.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_BIGSUR_H
+#define __ASM_SIBYTE_BIGSUR_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE 1
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS 3
+#define LEDS_PHYS 0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS 4
+#define IDE_PHYS 0x100b0000
+#define K_GPIO_GB_IDE 4
+#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS 6
+#define PCMCIA_PHYS 0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_BIGSUR_H */
+
diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h
index d7b11b6..900edcb 100644
--- a/include/asm-mips/sibyte/board.h
+++ b/include/asm-mips/sibyte/board.h
@@ -21,8 +21,6 @@
#include <linux/config.h>
-#ifdef CONFIG_SIBYTE_BOARD
-
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
defined(CONFIG_SIBYTE_LITTLESUR)
@@ -37,6 +35,10 @@
#include <asm/sibyte/carmel.h>
#endif
+#ifdef CONFIG_SIBYTE_BIGSUR
+#include <asm/sibyte/bigsur.h>
+#endif
+
#ifdef __ASSEMBLY__
#ifdef LEDS_PHYS
@@ -54,16 +56,6 @@
#define setleds(t0,t1,c0,c1,c2,c3)
#endif /* LEDS_PHYS */
-#else
-
-#ifdef LEDS_PHYS
-extern void setleds(char *str);
-#else
-#define setleds(s) do { } while (0)
-#endif /* LEDS_PHYS */
-
#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_SIBYTE_BOARD */
-
#endif /* _SIBYTE_BOARD_H */
diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h
index d62da4e..a474c29 100644
--- a/include/asm-mips/sibyte/sb1250.h
+++ b/include/asm-mips/sibyte/sb1250.h
@@ -27,6 +27,9 @@
#define SB1250_NR_IRQS 64
+#define BCM1480_NR_IRQS 128
+#define BCM1480_NR_IRQS_HALF 64
+
#define SB1250_DUART_MINOR_BASE 64
#ifndef __ASSEMBLY__
@@ -35,6 +38,7 @@
/* For revision/pass information */
#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/bcm1480_scd.h>
extern unsigned int sb1_pass;
extern unsigned int soc_pass;
extern unsigned int soc_type;
@@ -46,6 +50,13 @@
extern void sb1250_mask_irq(int cpu, int irq);
extern void sb1250_unmask_irq(int cpu, int irq);
extern void sb1250_smp_finish(void);
+
+extern void bcm1480_time_init(void);
+extern unsigned long bcm1480_gettimeoffset(void);
+extern void bcm1480_mask_irq(int cpu, int irq);
+extern void bcm1480_unmask_irq(int cpu, int irq);
+extern void bcm1480_smp_finish(void);
+
extern void prom_printf(char *fmt, ...);
#define AT_spin \
@@ -58,6 +69,6 @@
#endif
-#define IOADDR(a) (IO_BASE + (a))
+#define IOADDR(a) ((volatile void __iomem *)(IO_BASE + (a)))
#endif
diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h
index 40ef97c..335dbaf 100644
--- a/include/asm-mips/sibyte/sb1250_defs.h
+++ b/include/asm-mips/sibyte/sb1250_defs.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -97,13 +95,17 @@
* ordering, so be careful when adding support for new minor revs.
********************************************************************* */
-#define SIBYTE_HDR_FMASK_1250_ALL 0x00000ff
-#define SIBYTE_HDR_FMASK_1250_PASS1 0x0000001
-#define SIBYTE_HDR_FMASK_1250_PASS2 0x0000002
-#define SIBYTE_HDR_FMASK_1250_PASS3 0x0000004
+#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff
+#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001
+#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002
+#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004
-#define SIBYTE_HDR_FMASK_112x_ALL 0x0000f00
-#define SIBYTE_HDR_FMASK_112x_PASS1 0x0000100
+#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00
+#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100
+
+#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000
+#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000
+#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000
/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */
#define SIBYTE_HDR_FMASK(chip, pass) \
@@ -111,8 +113,17 @@
#define SIBYTE_HDR_FMASK_ALLREVS(chip) \
(SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+/* Default constant value for all chips, all revisions */
#define SIBYTE_HDR_FMASK_ALL \
+ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
+ | SIBYTE_HDR_FMASK_1480_ALL)
+
+/* This one is used for the "original" BCM1250/BCM112x chips. We use this
+ to weed out constants and macros that do not exist on later chips like
+ the BCM1480 */
+#define SIBYTE_HDR_FMASK_1250_112x_ALL \
(SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
#ifndef SIBYTE_HDR_FEATURES
#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL
@@ -133,6 +144,12 @@
#define SIBYTE_HDR_FEATURE_CHIP(chip) \
(!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+/* True for all versions of the BCM1250 and BCM1125, but not true for
+ anything else */
+#define SIBYTE_HDR_FEATURE_1250_112x \
+ (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */
+
/* True if header features enabled for that rev or later, inclusive. */
#define SIBYTE_HDR_FEATURE(chip, pass) \
(!! ((SIBYTE_HDR_FMASK(chip, pass) \
diff --git a/include/asm-mips/sibyte/sb1250_dma.h b/include/asm-mips/sibyte/sb1250_dma.h
index 3cdb48f..e6145f5 100644
--- a/include/asm-mips/sibyte/sb1250_dma.h
+++ b/include/asm-mips/sibyte/sb1250_dma.h
@@ -7,9 +7,8 @@
* programming the SB1250's DMA controllers, both the data mover
* and the Ethernet DMA.
*
- * SB1250 specification level: User's manual 1/02/02
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's manual 11/24/03
*
*********************************************************************
*
@@ -58,17 +57,17 @@
#define M_DMA_RESERVED1 _SB_MAKEMASK1(2)
#define S_DMA_DESC_TYPE _SB_MAKE64(1)
-#define M_DMA_DESC_TYPE _SB_MAKE64(2,S_DMA_DESC_TYPE)
+#define M_DMA_DESC_TYPE _SB_MAKEMASK(2,S_DMA_DESC_TYPE)
#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x,S_DMA_DESC_TYPE)
#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x,S_DMA_DESC_TYPE,M_DMA_DESC_TYPE)
#define K_DMA_DESC_TYPE_RING_AL 0
#define K_DMA_DESC_TYPE_CHAIN_AL 1
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define K_DMA_DESC_TYPE_RING_UAL_WI 2
#define K_DMA_DESC_TYPE_RING_UAL_RMW 3
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3)
#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4)
@@ -111,11 +110,11 @@
#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4)
#define M_DMA_L2CA _SB_MAKEMASK1(5)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6)
#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6)
#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_MBZ1 _SB_MAKEMASK(6,15)
@@ -165,14 +164,14 @@
#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40)
#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16,S_DMA_CURDSCR_COUNT)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* Receive Packet Drop Registers
*/
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_OODLOST_RX _SB_MAKE64(0)
#define M_DMA_OODLOST_RX _SB_MAKEMASK(16,S_DMA_OODLOST_RX)
#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x,S_DMA_OODLOST_RX,M_DMA_OODLOST_RX)
@@ -180,7 +179,7 @@
#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16)
#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8,S_DMA_EOP_COUNT_RX)
#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x,S_DMA_EOP_COUNT_RX,M_DMA_EOP_COUNT_RX)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/* *********************************************************************
* DMA Descriptors
@@ -201,21 +200,21 @@
#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0)
#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40,S_DMA_DSCRA_A_ADDR_UA)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40)
#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9,S_DMA_DSCRA_A_SIZE)
#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x,S_DMA_DSCRA_A_SIZE)
#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x,S_DMA_DSCRA_A_SIZE,M_DMA_DSCRA_A_SIZE)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40)
#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8,S_DMA_DSCRA_DSCR_CNT)
#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x,S_DMA_DSCRA_DSCR_CNT,M_DMA_DSCRA_DSCR_CNT)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49)
#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50)
@@ -235,12 +234,12 @@
#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_OPTIONS)
#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x,S_DMA_DSCRB_OPTIONS,M_DMA_DSCRB_OPTIONS)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8)
#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14,S_DMA_DSCRB_A_SIZE)
#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_A_SIZE)
#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x,S_DMA_DSCRB_A_SIZE,M_DMA_DSCRB_A_SIZE)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10)
@@ -255,12 +254,12 @@
#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48)
#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2,S_DMA_DSCRB_PKT_SIZE_MSB)
#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB)
#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB,M_DMA_DSCRB_PKT_SIZE_MSB)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50)
#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14,S_DMA_DSCRB_PKT_SIZE)
@@ -282,15 +281,16 @@
#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51)
#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
-/* Note: BADTCPCS is actually in DSCR_B options field */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: This bit is in the DSCR_B options field */
#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: These bits are in the DSCR_B options field */
#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1)
#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_ETHRX_RXCH 53
#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2,S_DMA_ETHRX_RXCH)
@@ -438,7 +438,7 @@
M_DM_CUR_DSCR_DSCR_COUNT)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover Channel Partial Result Registers
* Register: DM_PARTIAL_0
@@ -459,10 +459,10 @@
M_DM_PARTIAL_TCPCS_PARTIAL)
#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover CRC Definition Registers
* Register: CRC_DEF_0
@@ -479,10 +479,10 @@
#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r,S_CRC_DEF_CRC_POLY)
#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r,S_CRC_DEF_CRC_POLY,\
M_CRC_DEF_CRC_POLY)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover CRC/Checksum Definition Registers
* Register: CTCP_DEF_0
@@ -511,7 +511,7 @@
#define K_CTCP_DEF_CRC_WIDTH_1 2
#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
@@ -560,12 +560,12 @@
#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50)
#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52)
#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54)
#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55)
#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56)
@@ -574,7 +574,7 @@
#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59)
#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60)
#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3,61)
diff --git a/include/asm-mips/sibyte/sb1250_genbus.h b/include/asm-mips/sibyte/sb1250_genbus.h
index f1f509f..1b5cbc5 100644
--- a/include/asm-mips/sibyte/sb1250_genbus.h
+++ b/include/asm-mips/sibyte/sb1250_genbus.h
@@ -6,9 +6,8 @@
* This module contains constants and macros useful for
* manipulating the SB1250's Generic Bus interface
*
- * SB1250 specification level: User's manual 1/02/02
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's Manual 11/14/03
*
*********************************************************************
*
@@ -51,19 +50,21 @@
#define M_IO_WIDTH_SEL _SB_MAKEMASK(2,S_IO_WIDTH_SEL)
#define K_IO_WIDTH_SEL_1 0
#define K_IO_WIDTH_SEL_2 1
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define K_IO_WIDTH_SEL_1L 2
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define K_IO_WIDTH_SEL_4 3
#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x,S_IO_WIDTH_SEL)
#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x,S_IO_WIDTH_SEL,M_IO_WIDTH_SEL)
#define S_IO_PARITY_ENA 4
#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_IO_BURST_EN 5
#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_PARITY_ODD 6
#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD)
#define S_IO_NONMUX 7
@@ -96,8 +97,11 @@
#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */
+#define M_IO_BLK_CACHE _SB_MAKEMASK1(15)
+
+
/*
- * Generic Bus Region 0 Timing Registers (Table 11-7)
+ * Generic Bus Timing 0 Registers (Table 11-7)
*/
#define S_IO_ALE_WIDTH 0
@@ -105,21 +109,23 @@
#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x,S_IO_ALE_WIDTH)
#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x,S_IO_ALE_WIDTH,M_IO_ALE_WIDTH)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_EARLY_CS _SB_MAKEMASK1(3)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_ALE_TO_CS 4
#define M_IO_ALE_TO_CS _SB_MAKEMASK(2,S_IO_ALE_TO_CS)
#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x,S_IO_ALE_TO_CS)
#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x,S_IO_ALE_TO_CS,M_IO_ALE_TO_CS)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_IO_BURST_WIDTH _SB_MAKE64(6)
#define M_IO_BURST_WIDTH _SB_MAKEMASK(2,S_IO_BURST_WIDTH)
#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x,S_IO_BURST_WIDTH)
#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x,S_IO_BURST_WIDTH,M_IO_BURST_WIDTH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_CS_WIDTH 8
#define M_IO_CS_WIDTH _SB_MAKEMASK(5,S_IO_CS_WIDTH)
@@ -141,9 +147,10 @@
#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x,S_IO_ALE_TO_WRITE)
#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x,S_IO_ALE_TO_WRITE,M_IO_ALE_TO_WRITE)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_RDY_SYNC _SB_MAKEMASK1(3)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_WRITE_WIDTH 4
#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4,S_IO_WRITE_WIDTH)
@@ -183,9 +190,127 @@
#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10)
#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11)
#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_COH_ERR _SB_MAKEMASK1(14)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * Generic Bus Output Drive Control Register 0 (Table 14-18)
+ */
+
+#define S_IO_SLEW0 0
+#define M_IO_SLEW0 _SB_MAKEMASK(2,S_IO_SLEW0)
+#define V_IO_SLEW0(x) _SB_MAKEVALUE(x,S_IO_SLEW0)
+#define G_IO_SLEW0(x) _SB_GETVALUE(x,S_IO_SLEW0,M_IO_SLEW0)
+
+#define S_IO_DRV_A 2
+#define M_IO_DRV_A _SB_MAKEMASK(2,S_IO_DRV_A)
+#define V_IO_DRV_A(x) _SB_MAKEVALUE(x,S_IO_DRV_A)
+#define G_IO_DRV_A(x) _SB_GETVALUE(x,S_IO_DRV_A,M_IO_DRV_A)
+
+#define S_IO_DRV_B 6
+#define M_IO_DRV_B _SB_MAKEMASK(2,S_IO_DRV_B)
+#define V_IO_DRV_B(x) _SB_MAKEVALUE(x,S_IO_DRV_B)
+#define G_IO_DRV_B(x) _SB_GETVALUE(x,S_IO_DRV_B,M_IO_DRV_B)
+
+#define S_IO_DRV_C 10
+#define M_IO_DRV_C _SB_MAKEMASK(2,S_IO_DRV_C)
+#define V_IO_DRV_C(x) _SB_MAKEVALUE(x,S_IO_DRV_C)
+#define G_IO_DRV_C(x) _SB_GETVALUE(x,S_IO_DRV_C,M_IO_DRV_C)
+
+#define S_IO_DRV_D 14
+#define M_IO_DRV_D _SB_MAKEMASK(2,S_IO_DRV_D)
+#define V_IO_DRV_D(x) _SB_MAKEVALUE(x,S_IO_DRV_D)
+#define G_IO_DRV_D(x) _SB_GETVALUE(x,S_IO_DRV_D,M_IO_DRV_D)
+
+/*
+ * Generic Bus Output Drive Control Register 1 (Table 14-19)
+ */
+
+#define S_IO_DRV_E 2
+#define M_IO_DRV_E _SB_MAKEMASK(2,S_IO_DRV_E)
+#define V_IO_DRV_E(x) _SB_MAKEVALUE(x,S_IO_DRV_E)
+#define G_IO_DRV_E(x) _SB_GETVALUE(x,S_IO_DRV_E,M_IO_DRV_E)
+
+#define S_IO_DRV_F 6
+#define M_IO_DRV_F _SB_MAKEMASK(2,S_IO_DRV_F)
+#define V_IO_DRV_F(x) _SB_MAKEVALUE(x,S_IO_DRV_F)
+#define G_IO_DRV_F(x) _SB_GETVALUE(x,S_IO_DRV_F,M_IO_DRV_F)
+
+#define S_IO_SLEW1 8
+#define M_IO_SLEW1 _SB_MAKEMASK(2,S_IO_SLEW1)
+#define V_IO_SLEW1(x) _SB_MAKEVALUE(x,S_IO_SLEW1)
+#define G_IO_SLEW1(x) _SB_GETVALUE(x,S_IO_SLEW1,M_IO_SLEW1)
+
+#define S_IO_DRV_G 10
+#define M_IO_DRV_G _SB_MAKEMASK(2,S_IO_DRV_G)
+#define V_IO_DRV_G(x) _SB_MAKEVALUE(x,S_IO_DRV_G)
+#define G_IO_DRV_G(x) _SB_GETVALUE(x,S_IO_DRV_G,M_IO_DRV_G)
+
+#define S_IO_SLEW2 12
+#define M_IO_SLEW2 _SB_MAKEMASK(2,S_IO_SLEW2)
+#define V_IO_SLEW2(x) _SB_MAKEVALUE(x,S_IO_SLEW2)
+#define G_IO_SLEW2(x) _SB_GETVALUE(x,S_IO_SLEW2,M_IO_SLEW2)
+
+#define S_IO_DRV_H 14
+#define M_IO_DRV_H _SB_MAKEMASK(2,S_IO_DRV_H)
+#define V_IO_DRV_H(x) _SB_MAKEVALUE(x,S_IO_DRV_H)
+#define G_IO_DRV_H(x) _SB_GETVALUE(x,S_IO_DRV_H,M_IO_DRV_H)
+
+/*
+ * Generic Bus Output Drive Control Register 2 (Table 14-20)
+ */
+
+#define S_IO_DRV_J 2
+#define M_IO_DRV_J _SB_MAKEMASK(2,S_IO_DRV_J)
+#define V_IO_DRV_J(x) _SB_MAKEVALUE(x,S_IO_DRV_J)
+#define G_IO_DRV_J(x) _SB_GETVALUE(x,S_IO_DRV_J,M_IO_DRV_J)
+
+#define S_IO_DRV_K 6
+#define M_IO_DRV_K _SB_MAKEMASK(2,S_IO_DRV_K)
+#define V_IO_DRV_K(x) _SB_MAKEVALUE(x,S_IO_DRV_K)
+#define G_IO_DRV_K(x) _SB_GETVALUE(x,S_IO_DRV_K,M_IO_DRV_K)
+
+#define S_IO_DRV_L 10
+#define M_IO_DRV_L _SB_MAKEMASK(2,S_IO_DRV_L)
+#define V_IO_DRV_L(x) _SB_MAKEVALUE(x,S_IO_DRV_L)
+#define G_IO_DRV_L(x) _SB_GETVALUE(x,S_IO_DRV_L,M_IO_DRV_L)
+
+#define S_IO_DRV_M 14
+#define M_IO_DRV_M _SB_MAKEMASK(2,S_IO_DRV_M)
+#define V_IO_DRV_M(x) _SB_MAKEVALUE(x,S_IO_DRV_M)
+#define G_IO_DRV_M(x) _SB_GETVALUE(x,S_IO_DRV_M,M_IO_DRV_M)
+
+/*
+ * Generic Bus Output Drive Control Register 3 (Table 14-21)
+ */
+
+#define S_IO_SLEW3 0
+#define M_IO_SLEW3 _SB_MAKEMASK(2,S_IO_SLEW3)
+#define V_IO_SLEW3(x) _SB_MAKEVALUE(x,S_IO_SLEW3)
+#define G_IO_SLEW3(x) _SB_GETVALUE(x,S_IO_SLEW3,M_IO_SLEW3)
+
+#define S_IO_DRV_N 2
+#define M_IO_DRV_N _SB_MAKEMASK(2,S_IO_DRV_N)
+#define V_IO_DRV_N(x) _SB_MAKEVALUE(x,S_IO_DRV_N)
+#define G_IO_DRV_N(x) _SB_GETVALUE(x,S_IO_DRV_N,M_IO_DRV_N)
+
+#define S_IO_DRV_P 6
+#define M_IO_DRV_P _SB_MAKEMASK(2,S_IO_DRV_P)
+#define V_IO_DRV_P(x) _SB_MAKEVALUE(x,S_IO_DRV_P)
+#define G_IO_DRV_P(x) _SB_GETVALUE(x,S_IO_DRV_P,M_IO_DRV_P)
+
+#define S_IO_DRV_Q 10
+#define M_IO_DRV_Q _SB_MAKEMASK(2,S_IO_DRV_Q)
+#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x,S_IO_DRV_Q)
+#define G_IO_DRV_Q(x) _SB_GETVALUE(x,S_IO_DRV_Q,M_IO_DRV_Q)
+
+#define S_IO_DRV_R 14
+#define M_IO_DRV_R _SB_MAKEMASK(2,S_IO_DRV_R)
+#define V_IO_DRV_R(x) _SB_MAKEVALUE(x,S_IO_DRV_R)
+#define G_IO_DRV_R(x) _SB_GETVALUE(x,S_IO_DRV_R,M_IO_DRV_R)
+
/*
* PCMCIA configuration register (Table 12-6)
@@ -202,6 +327,22 @@
#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8)
#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_PCMCIA_MODE 16
+#define M_PCMCIA_MODE _SB_MAKEMASK(3,S_PCMCIA_MODE)
+#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x,S_PCMCIA_MODE)
+#define G_PCMCIA_MODE(x) _SB_GETVALUE(x,S_PCMCIA_MODE,M_PCMCIA_MODE)
+
+#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */
+#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */
+#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */
+#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */
+#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */
+#endif
+
+
/*
* PCMCIA status register (Table 12-7)
*/
@@ -272,5 +413,62 @@
#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x,S_GPIO_INTR_TYPE14)
#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x,S_GPIO_INTR_TYPE14,M_GPIO_INTR_TYPE14)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+
+/*
+ * GPIO Interrupt Additional Type Register
+ */
+
+#define K_GPIO_INTR_BOTHEDGE 0
+#define K_GPIO_INTR_RISEEDGE 1
+#define K_GPIO_INTR_UNPRED1 2
+#define K_GPIO_INTR_UNPRED2 3
+
+#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2)
+#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2,S_GPIO_INTR_ATYPEX(n))
+#define V_GPIO_INTR_ATYPEX(n,x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPEX(n))
+#define G_GPIO_INTR_ATYPEX(n,x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPEX(n),M_GPIO_INTR_ATYPEX(n))
+
+#define S_GPIO_INTR_ATYPE0 0
+#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE0)
+#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE0)
+#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE0,M_GPIO_INTR_ATYPE0)
+
+#define S_GPIO_INTR_ATYPE2 2
+#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE2)
+#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE2)
+#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE2,M_GPIO_INTR_ATYPE2)
+
+#define S_GPIO_INTR_ATYPE4 4
+#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE4)
+#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE4)
+#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE4,M_GPIO_INTR_ATYPE4)
+
+#define S_GPIO_INTR_ATYPE6 6
+#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE6)
+#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE6)
+#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE6,M_GPIO_INTR_ATYPE6)
+
+#define S_GPIO_INTR_ATYPE8 8
+#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE8)
+#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE8)
+#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE8,M_GPIO_INTR_ATYPE8)
+
+#define S_GPIO_INTR_ATYPE10 10
+#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE10)
+#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE10)
+#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE10,M_GPIO_INTR_ATYPE10)
+
+#define S_GPIO_INTR_ATYPE12 12
+#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE12)
+#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE12)
+#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE12,M_GPIO_INTR_ATYPE12)
+
+#define S_GPIO_INTR_ATYPE14 14
+#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE14)
+#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE14)
+#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE14,M_GPIO_INTR_ATYPE14)
+#endif
+
#endif
diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h
index e173e2e..05c7b39 100644
--- a/include/asm-mips/sibyte/sb1250_int.h
+++ b/include/asm-mips/sibyte/sb1250_int.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -47,6 +45,10 @@
* First, the interrupt numbers.
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
+
+#define K_INT_SOURCES 64
+
#define K_INT_WATCHDOG_TIMER_0 0
#define K_INT_WATCHDOG_TIMER_1 1
#define K_INT_TIMER_0 2
@@ -244,4 +246,6 @@
#define M_LDTVECT_RAISEMBOX 0x40
+#endif /* 1250/112x */
+
#endif
diff --git a/include/asm-mips/sibyte/sb1250_l2c.h b/include/asm-mips/sibyte/sb1250_l2c.h
index 8afe8e0..842f205 100644
--- a/include/asm-mips/sibyte/sb1250_l2c.h
+++ b/include/asm-mips/sibyte/sb1250_l2c.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -89,8 +87,13 @@
#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x,S_L2C_MGMT_WAY)
#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x,S_L2C_MGMT_WAY,M_L2C_MGMT_WAY)
-#define S_L2C_MGMT_TAG 21
-#define M_L2C_MGMT_TAG _SB_MAKEMASK(6,S_L2C_MGMT_TAG)
+#define S_L2C_MGMT_ECC_DIAG 21
+#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2,S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x,S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x,S_L2C_MGMT_ECC_DIAG,M_L2C_MGMT_ECC_DIAG)
+
+#define S_L2C_MGMT_TAG 23
+#define M_L2C_MGMT_TAG _SB_MAKEMASK(4,S_L2C_MGMT_TAG)
#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x,S_L2C_MGMT_TAG)
#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x,S_L2C_MGMT_TAG,M_L2C_MGMT_TAG)
diff --git a/include/asm-mips/sibyte/sb1250_ldt.h b/include/asm-mips/sibyte/sb1250_ldt.h
index f2617de..7092535 100644
--- a/include/asm-mips/sibyte/sb1250_ldt.h
+++ b/include/asm-mips/sibyte/sb1250_ldt.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h
index 18e74e4..adfc688 100644
--- a/include/asm-mips/sibyte/sb1250_mac.h
+++ b/include/asm-mips/sibyte/sb1250_mac.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -81,7 +79,10 @@
#define M_MAC_RESERVED1 _SB_MAKEMASK(8,9)
#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17)
-#define M_MAC_RESERVED2 _SB_MAKEMASK1(18)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18)
+#endif
#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19)
#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20)
#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21)
@@ -132,9 +133,9 @@
#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44)
#endif /* 1250 PASS2 || 112x PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_MAC_BYPASS_IFG _SB_MAKE64(46)
#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8,S_MAC_BYPASS_IFG)
@@ -176,10 +177,22 @@
#define M_MAC_PORT_RESET _SB_MAKEMASK1(8)
+#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10)
#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11)
#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12)
#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13)
+#endif
+
+/*
+ * MAC reset information register (1280/1255)
+ */
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8)
+#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16)
+#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24)
+#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32)
+#endif
/*
* MAC DMA Control Register
@@ -267,12 +280,12 @@
#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x,S_MAC_IFG_RX)
#define G_MAC_IFG_RX(x) _SB_GETVALUE(x,S_MAC_IFG_RX,M_MAC_IFG_RX)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_PRE_LEN _SB_MAKE64(0)
#define M_MAC_PRE_LEN _SB_MAKEMASK(6,S_MAC_PRE_LEN)
#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x,S_MAC_PRE_LEN)
#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x,S_MAC_PRE_LEN,M_MAC_PRE_LEN)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_MAC_IFG_TX _SB_MAKE64(6)
#define M_MAC_IFG_TX _SB_MAKEMASK(6,S_MAC_IFG_TX)
@@ -458,9 +471,9 @@
#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x,S_MAC_COUNTER_ADDR)
#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x,S_MAC_COUNTER_ADDR,M_MAC_COUNTER_ADDR)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* MAC Fifo Pointer Registers (Table 9-19) [Debug register]
@@ -594,7 +607,7 @@
#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x,S_MAC_IPHDR_OFFSET)
#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x,S_MAC_IPHDR_OFFSET,M_MAC_IPHDR_OFFSET)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16)
#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8,S_MAC_RX_CRC_OFFSET)
#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x,S_MAC_RX_CRC_OFFSET)
@@ -612,7 +625,7 @@
#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8,S_MAC_RX_CH_MSN_SEL)
#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x,S_MAC_RX_CH_MSN_SEL)
#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x,S_MAC_RX_CH_MSN_SEL,M_MAC_RX_CH_MSN_SEL)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* MAC Receive Channel Select Registers (Table 9-25)
diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h
index 1dd41c9..26e42149 100644
--- a/include/asm-mips/sibyte/sb1250_mc.h
+++ b/include/asm-mips/sibyte/sb1250_mc.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -324,6 +322,10 @@
#define K_MC_tRFC_DEFAULT 12
#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT)
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */
+#endif
+
#define S_MC_tCwCr 40
#define M_MC_tCwCr _SB_MAKEMASK(4,S_MC_tCwCr)
#define V_MC_tCwCr(x) _SB_MAKEVALUE(x,S_MC_tCwCr)
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
index 9db80cd..bab3a45 100644
--- a/include/asm-mips/sibyte/sb1250_regs.h
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: 01/02/2002
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -61,6 +59,8 @@
* XXX: can't remove MC base 0 if 112x, since it's used by other macros,
* since there is one reg there (but it could get its addr/offset constant).
*/
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define A_MC_BASE_0 0x0010051000
#define A_MC_BASE_1 0x0010052000
#define MC_REGISTER_SPACING 0x1000
@@ -101,10 +101,14 @@
#define R_MC_TEST_ECC 0x0000000420
#define R_MC_MCLK_CFG 0x0000000500
+#endif /* 1250 & 112x */
+
/* *********************************************************************
* L2 Cache Control Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */
+
#define A_L2_READ_TAG 0x0010040018
#define A_L2_ECC_TAG 0x0010040038
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
@@ -125,13 +129,16 @@
#define A_L2_READ_ADDRESS A_L2_READ_TAG
#define A_L2_EEC_ADDRESS A_L2_ECC_TAG
+#endif
/* *********************************************************************
* PCI Interface Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */
#define A_PCI_TYPE00_HEADER 0x00DE000000
#define A_PCI_TYPE01_HEADER 0x00DE000800
+#endif
/* *********************************************************************
@@ -264,15 +271,15 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_NUM_PORTS 2
#define A_DUART 0x0010060000
-#define A_DUART_REG(r)
-
#define DUART_CHANREG_SPACING 0x100
#define A_DUART_CHANREG(chan,reg) (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
#define R_DUART_CHANREG(chan,reg) (DUART_CHANREG_SPACING*(chan) + (reg))
+#endif /* 1250 & 112x */
#define R_DUART_MODE_REG_1 0x100
#define R_DUART_MODE_REG_2 0x110
@@ -307,11 +314,13 @@
#define DUART_IMRISR_SPACING 0x20
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_IMRREG(chan) (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
#define R_DUART_ISRREG(chan) (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
#define A_DUART_IMRREG(chan) (A_DUART + R_DUART_IMRREG(chan))
#define A_DUART_ISRREG(chan) (A_DUART + R_DUART_ISRREG(chan))
+#endif /* 1250 & 112x */
@@ -368,6 +377,8 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */
+
#define A_SER_BASE_0 0x0010060400
#define A_SER_BASE_1 0x0010060800
#define SER_SPACING 0x400
@@ -457,6 +468,8 @@
#define R_SER_RMON_RX_ERRORS 0x000001F0
#define R_SER_RMON_RX_BADADDR 0x000001F8
+#endif /* 1250/112x */
+
/* *********************************************************************
* Generic Bus Registers
********************************************************************* */
@@ -634,12 +647,13 @@
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_SCRATCH 0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000
#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00
#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08
-#endif /* 1250 PASS2 || 112x PASS1 */
-
+#endif
/* *********************************************************************
* System Control Registers
@@ -667,15 +681,16 @@
#define A_ADDR_TRAP_CFG_1 0x0010020448
#define A_ADDR_TRAP_CFG_2 0x0010020450
#define A_ADDR_TRAP_CFG_3 0x0010020458
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_ADDR_TRAP_REG_DEBUG 0x0010020460
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* *********************************************************************
* System Interrupt Mapper Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_IMR_CPU0_BASE 0x0010020000
#define A_IMR_CPU1_BASE 0x0010022000
#define IMR_REGISTER_SPACING 0x2000
@@ -700,6 +715,7 @@
#define R_IMR_INTERRUPT_STATUS_COUNT 7
#define R_IMR_INTERRUPT_MAP_BASE 0x0200
#define R_IMR_INTERRUPT_MAP_COUNT 64
+#endif /* 1250/112x */
/* *********************************************************************
* System Performance Counter Registers
@@ -718,6 +734,7 @@
#define A_SCD_BUS_ERR_STATUS 0x0010020880
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0
#endif /* 1250 PASS2 || 112x PASS1 */
#define A_BUS_ERR_DATA_0 0x00100208A0
#define A_BUS_ERR_DATA_1 0x00100208A8
@@ -798,6 +815,7 @@
* Physical Address Map
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
@@ -831,6 +849,7 @@
#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000)
#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000)
#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000)
+#endif
#endif
diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h
index dbbd682..a667bc1 100644
--- a/include/asm-mips/sibyte/sb1250_scd.h
+++ b/include/asm-mips/sibyte/sb1250_scd.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -51,26 +49,70 @@
#define V_SYS_REVISION(x) _SB_MAKEVALUE(x,S_SYS_REVISION)
#define G_SYS_REVISION(x) _SB_GETVALUE(x,S_SYS_REVISION,M_SYS_REVISION)
-#if SIBYTE_HDR_FEATURE_CHIP(1250)
-#define K_SYS_REVISION_BCM1250_PASS1 1
-#define K_SYS_REVISION_BCM1250_PASS2 3
-#define K_SYS_REVISION_BCM1250_A10 11
-#define K_SYS_REVISION_BCM1250_PASS2_2 16
-#define K_SYS_REVISION_BCM1250_B2 17
-#define K_SYS_REVISION_BCM1250_PASS3 32
-#define K_SYS_REVISION_BCM1250_C1 33
+#define K_SYS_REVISION_BCM1250_PASS1 0x01
+#define K_SYS_REVISION_BCM1250_PASS2 0x03
+#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */
+#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */
+#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */
+#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */
+#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */
+#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */
+#define K_SYS_REVISION_BCM1250_A9 0x08
+#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8
+
+#define K_SYS_REVISION_BCM1250_PASS2_2 0x10
+#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1
+#define K_SYS_REVISION_BCM1250_B1 0x10
+#define K_SYS_REVISION_BCM1250_B2 0x11
+
+#define K_SYS_REVISION_BCM1250_C0 0x20
+#define K_SYS_REVISION_BCM1250_C1 0x21
+#define K_SYS_REVISION_BCM1250_C2 0x22
+#define K_SYS_REVISION_BCM1250_C3 0x23
+
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
/* XXX: discourage people from using these constants. */
#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1
#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2
#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2
#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3
+#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0
#endif /* 1250 */
-#if SIBYTE_HDR_FEATURE_CHIP(112x)
-#define K_SYS_REVISION_BCM112x_A1 32
-#define K_SYS_REVISION_BCM112x_A2 33
-#endif /* 112x */
+#define K_SYS_REVISION_BCM112x_A1 0x20
+#define K_SYS_REVISION_BCM112x_A2 0x21
+#define K_SYS_REVISION_BCM112x_A3 0x22
+#define K_SYS_REVISION_BCM112x_A4 0x23
+
+#define K_SYS_REVISION_BCM1480_S0 0x01
+#define K_SYS_REVISION_BCM1480_A1 0x02
+#define K_SYS_REVISION_BCM1480_A2 0x03
+#define K_SYS_REVISION_BCM1480_A3 0x04
+#define K_SYS_REVISION_BCM1480_B0 0x11
+
+/*Cache size - 23:20 of revision register*/
+#define S_SYS_L2C_SIZE _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE _SB_MAKEMASK(4,S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x,S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x,S_SYS_L2C_SIZE,M_SYS_L2C_SIZE)
+
+#define K_SYS_L2C_SIZE_1MB 0
+#define K_SYS_L2C_SIZE_512KB 5
+#define K_SYS_L2C_SIZE_256KB 2
+#define K_SYS_L2C_SIZE_128KB 1
+
+#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB
+#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB
+#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB
+
+
+/* Number of CPU cores, bits 27:24 of revision register*/
+#define S_SYS_NUM_CPUS _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS _SB_MAKEMASK(4,S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x,S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x,S_SYS_NUM_CPUS,M_SYS_NUM_CPUS)
+
/* XXX: discourage people from using these constants. */
#define S_SYS_PART _SB_MAKE64(16)
@@ -83,6 +125,8 @@
#define K_SYS_PART_BCM1120 0x1121
#define K_SYS_PART_BCM1125 0x1123
#define K_SYS_PART_BCM1125H 0x1124
+#define K_SYS_PART_BCM1122 0x1113
+
/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */
#define S_SYS_SOC_TYPE _SB_MAKE64(16)
@@ -96,6 +140,8 @@
#define K_SYS_SOC_TYPE_BCM1125 0x3
#define K_SYS_SOC_TYPE_BCM1125H 0x4
#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */
+#define K_SYS_SOC_TYPE_BCM1x80 0x6
+#define K_SYS_SOC_TYPE_BCM1x55 0x7
/*
* Calculate correct SOC type given a copy of system revision register.
@@ -127,10 +173,12 @@
#define V_SYS_WID(x) _SB_MAKEVALUE(x,S_SYS_WID)
#define G_SYS_WID(x) _SB_GETVALUE(x,S_SYS_WID,M_SYS_WID)
-/* System Manufacturing Register
-* Register: SCD_SYSTEM_MANUF
-*/
+/*
+ * System Manufacturing Register
+ * Register: SCD_SYSTEM_MANUF
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
/* Wafer ID: bits 31:0 */
#define S_SYS_WAFERID1_200 _SB_MAKE64(0)
#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32,S_SYS_WAFERID1_200)
@@ -139,8 +187,8 @@
#define S_SYS_BIN _SB_MAKE64(32)
#define M_SYS_BIN _SB_MAKEMASK(4,S_SYS_BIN)
-#define V_SYS_BIN _SB_MAKEVALUE(x,S_SYS_BIN)
-#define G_SYS_BIN _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
+#define V_SYS_BIN(x) _SB_MAKEVALUE(x,S_SYS_BIN)
+#define G_SYS_BIN(x) _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
/* Wafer ID: bits 39:36 */
#define S_SYS_WAFERID2_200 _SB_MAKE64(36)
@@ -163,12 +211,14 @@
#define M_SYS_YPOS _SB_MAKEMASK(6,S_SYS_YPOS)
#define V_SYS_YPOS(x) _SB_MAKEVALUE(x,S_SYS_YPOS)
#define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
+#endif
/*
* System Config Register (Table 4-2)
* Register: SCD_SYSTEM_CFG
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3)
#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4)
#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5)
@@ -253,6 +303,8 @@
#define M_SYS_SW_FLAG _SB_MAKEMASK1(63)
#endif /* 1250 PASS2 || 112x PASS1 */
+#endif
+
/*
* Mailbox Registers (Table 4-3)
@@ -326,6 +378,7 @@
* System Performance Counters
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define S_SPC_CFG_SRC0 0
#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)
@@ -348,6 +401,7 @@
#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32)
#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33)
+#endif
/*
@@ -412,6 +466,7 @@
* Address Trap Registers
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define M_ATRAP_INDEX _SB_MAKEMASK(4,0)
#define M_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
@@ -436,7 +491,6 @@
#define K_BUS_AGENT_IOB0 2
#define K_BUS_AGENT_IOB1 3
#define K_BUS_AGENT_SCD 4
-#define K_BUS_AGENT_RESERVED 5
#define K_BUS_AGENT_L2C 6
#define K_BUS_AGENT_MC 7
@@ -454,10 +508,14 @@
#define K_ATRAP_CFG_CATTR_NOTNONCOH 6
#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7
+#endif /* 1250/112x */
+
/*
* Trace Buffer Config register
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
+
#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
@@ -475,6 +533,8 @@
#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
+#endif /* 1250/112x */
+
/*
* Trace Event registers
*/
@@ -578,5 +638,7 @@
#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20)
#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21)
#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24)
#endif
diff --git a/include/asm-mips/sibyte/sb1250_smbus.h b/include/asm-mips/sibyte/sb1250_smbus.h
index 335c53e..279a912 100644
--- a/include/asm-mips/sibyte/sb1250_smbus.h
+++ b/include/asm-mips/sibyte/sb1250_smbus.h
@@ -6,9 +6,8 @@
* This module contains constants and macros useful for
* manipulating the SB1250's SMbus devices.
*
- * SB1250 specification level: 01/02/2002
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: 10/21/02
+ * BCM1280 specification level: 11/24/03
*
*********************************************************************
*
@@ -47,6 +46,7 @@
#define K_SMB_FREQ_400KHZ 0x1F
#define K_SMB_FREQ_100KHZ 0x7D
+#define K_SMB_FREQ_10KHZ 1250
#define S_SMB_CMD 0
#define M_SMB_CMD _SB_MAKEMASK(8,S_SMB_CMD)
@@ -58,7 +58,11 @@
#define M_SMB_ERR_INTR _SB_MAKEMASK1(0)
#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1)
-#define M_SMB_DATA_OUT _SB_MAKEMASK1(4)
+
+#define S_SMB_DATA_OUT 4
+#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x,S_SMB_DATA_OUT)
+
#define M_SMB_DATA_DIR _SB_MAKEMASK1(5)
#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR
#define M_SMB_CLK_OUT _SB_MAKEMASK1(6)
@@ -71,8 +75,23 @@
#define M_SMB_BUSY _SB_MAKEMASK1(0)
#define M_SMB_ERROR _SB_MAKEMASK1(1)
#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2)
-#define M_SMB_REF _SB_MAKEMASK1(6)
-#define M_SMB_DATA_IN _SB_MAKEMASK1(7)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SMB_SCL_IN 5
+#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x,S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x) _SB_GETVALUE(x,S_SMB_SCL_IN,M_SMB_SCL_IN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_SMB_REF 6
+#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x) _SB_MAKEVALUE(x,S_SMB_REF)
+#define G_SMB_REF(x) _SB_GETVALUE(x,S_SMB_REF,M_SMB_REF)
+
+#define S_SMB_DATA_IN 7
+#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x,S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x) _SB_GETVALUE(x,S_SMB_DATA_IN,M_SMB_DATA_IN)
/*
* SMBus Start/Command registers (Table 14-9)
@@ -132,16 +151,14 @@
#define V_SPEC_MB(x) _SB_MAKEVALUE(x,S_SPEC_PEC)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_SMB_CMDH 8
-#define M_SMB_CMDH _SB_MAKEMASK(8,S_SMBH_CMD)
-#define V_SMB_CMDH(x) _SB_MAKEVALUE(x,S_SMBH_CMD)
+#define M_SMB_CMDH _SB_MAKEMASK(8,S_SMB_CMDH)
+#define V_SMB_CMDH(x) _SB_MAKEVALUE(x,S_SMB_CMDH)
#define M_SMB_EXTEND _SB_MAKEMASK1(14)
-#define M_SMB_DIR _SB_MAKEMASK1(13)
-
#define S_SMB_DFMT 8
#define M_SMB_DFMT _SB_MAKEMASK(3,S_SMB_DFMT)
#define V_SMB_DFMT(x) _SB_MAKEVALUE(x,S_SMB_DFMT)
@@ -165,6 +182,23 @@
#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#define S_SMB_AFMT 11
+#define M_SMB_AFMT _SB_MAKEMASK(2,S_SMB_AFMT)
+#define V_SMB_AFMT(x) _SB_MAKEVALUE(x,S_SMB_AFMT)
+#define G_SMB_AFMT(x) _SB_GETVALUE(x,S_SMB_AFMT,M_SMB_AFMT)
+
+#define K_SMB_AFMT_NONE 0
+#define K_SMB_AFMT_ADDR 1
+#define K_SMB_AFMT_ADDR_CMD1BYTE 2
+#define K_SMB_AFMT_ADDR_CMD2BYTE 3
+
+#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE)
+#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR)
+#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE)
+#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE)
+
+#define M_SMB_DIR _SB_MAKEMASK1(13)
+
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#endif
diff --git a/include/asm-mips/sibyte/sb1250_syncser.h b/include/asm-mips/sibyte/sb1250_syncser.h
index fa2760d..dd154ac 100644
--- a/include/asm-mips/sibyte/sb1250_syncser.h
+++ b/include/asm-mips/sibyte/sb1250_syncser.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h
index 923ea4f..e87045e 100644
--- a/include/asm-mips/sibyte/sb1250_uart.h
+++ b/include/asm-mips/sibyte/sb1250_uart.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -240,7 +238,12 @@
*/
#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0)
-#define M_DUART_ISR_RX_A _SB_MAKEMASK1(1)
+
+#define S_DUART_ISR_RX_A 1
+#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x,S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x,S_DUART_ISR_RX_A,M_DUART_ISR_RX_A)
+
#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2)
#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3)
#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4)
@@ -331,7 +334,7 @@
#define M_DUART_OUT_PIN_CLR(chan) \
(chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Full Interrupt Control Register
*/
@@ -345,7 +348,7 @@
#define M_DUART_INT_TIME _SB_MAKEMASK(4,S_DUART_INT_TIME)
#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x,S_DUART_INT_TIME)
#define G_DUART_INT_TIME(x) _SB_GETVALUE(x,S_DUART_INT_TIME,M_DUART_INT_TIME)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* ********************************************************************** */
diff --git a/include/asm-mips/sibyte/swarm.h b/include/asm-mips/sibyte/swarm.h
index 97fa049..06e1d52 100644
--- a/include/asm-mips/sibyte/swarm.h
+++ b/include/asm-mips/sibyte/swarm.h
@@ -34,7 +34,7 @@
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
#ifdef CONFIG_SIBYTE_LITTLESUR
-#define SIBYTE_BOARD_NAME "BCM1250C2 (LittleSur)"
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
#define SIBYTE_HAVE_PCMCIA 0
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "cfe0"
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
index f7fbeba..8edabb0 100644
--- a/include/asm-mips/sigcontext.h
+++ b/include/asm-mips/sigcontext.h
@@ -27,14 +27,15 @@
unsigned int sc_fpc_csr;
unsigned int sc_fpc_eir; /* Unused */
unsigned int sc_used_math;
- unsigned int sc_ssflags; /* Unused */
+ unsigned int sc_dsp; /* dsp status, was sc_ssflags */
unsigned long long sc_mdhi;
unsigned long long sc_mdlo;
-
- unsigned int sc_cause; /* Unused */
- unsigned int sc_badvaddr; /* Unused */
-
- unsigned long sc_sigset[4]; /* kernel's sigset_t */
+ unsigned long sc_hi1; /* Was sc_cause */
+ unsigned long sc_lo1; /* Was sc_badvaddr */
+ unsigned long sc_hi2; /* Was sc_sigset[4] */
+ unsigned long sc_lo2;
+ unsigned long sc_hi3;
+ unsigned long sc_lo3;
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
@@ -48,19 +49,19 @@
* Warning: this structure illdefined with sc_badvaddr being just an unsigned
* int so it was changed to unsigned long in 2.6.0-test1. This may break
* binary compatibility - no prisoners.
+ * DSP ASE in 2.6.12-rc4. Turn sc_mdhi and sc_mdlo into an array of four
+ * entries, add sc_dsp and sc_reserved for padding. No prisoners.
*/
struct sigcontext {
unsigned long sc_regs[32];
unsigned long sc_fpregs[32];
- unsigned long sc_mdhi;
- unsigned long sc_mdlo;
+ unsigned long sc_hi[4];
+ unsigned long sc_lo[4];
unsigned long sc_pc;
- unsigned long sc_badvaddr;
- unsigned int sc_status;
unsigned int sc_fpc_csr;
- unsigned int sc_fpc_eir;
unsigned int sc_used_math;
- unsigned int sc_cause;
+ unsigned int sc_dsp;
+ unsigned int sc_reserved;
};
#ifdef __KERNEL__
@@ -68,23 +69,24 @@
#include <linux/posix_types.h>
struct sigcontext32 {
- __u32 sc_regmask; /* Unused */
- __u32 sc_status;
- __u64 sc_pc;
- __u64 sc_regs[32];
- __u64 sc_fpregs[32];
- __u32 sc_ownedfp; /* Unused */
- __u32 sc_fpc_csr;
- __u32 sc_fpc_eir; /* Unused */
- __u32 sc_used_math;
- __u32 sc_ssflags; /* Unused */
- __u64 sc_mdhi;
- __u64 sc_mdlo;
-
- __u32 sc_cause; /* Unused */
- __u32 sc_badvaddr; /* Unused */
-
- __u32 sc_sigset[4]; /* kernel's sigset_t */
+ __u32 sc_regmask; /* Unused */
+ __u32 sc_status;
+ __u64 sc_pc;
+ __u64 sc_regs[32];
+ __u64 sc_fpregs[32];
+ __u32 sc_ownedfp; /* Unused */
+ __u32 sc_fpc_csr;
+ __u32 sc_fpc_eir; /* Unused */
+ __u32 sc_used_math;
+ __u32 sc_dsp; /* dsp status, was sc_ssflags */
+ __u64 sc_mdhi;
+ __u64 sc_mdlo;
+ __u32 sc_hi1; /* Was sc_cause */
+ __u32 sc_lo1; /* Was sc_badvaddr */
+ __u32 sc_hi2; /* Was sc_sigset[4] */
+ __u32 sc_lo2;
+ __u32 sc_hi3;
+ __u32 sc_lo3;
};
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/siginfo.h b/include/asm-mips/siginfo.h
index 698beca..2ba313d 100644
--- a/include/asm-mips/siginfo.h
+++ b/include/asm-mips/siginfo.h
@@ -11,6 +11,7 @@
#include <linux/config.h>
+#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int))
#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */
#define HAVE_ARCH_SIGINFO_T
diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h
index f2c470f..8ca539e 100644
--- a/include/asm-mips/signal.h
+++ b/include/asm-mips/signal.h
@@ -98,12 +98,39 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
+ */
+#define SA_SAMPLE_RANDOM SA_RESTART
+
+#ifdef CONFIG_TRAD_SIGNALS
+#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO)
+#else
+#define sig_uses_siginfo(ka) (1)
+#endif
+
+#endif /* __KERNEL__ */
+
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility:
set only the low 32 bit of the sigset. */
-#include <asm-generic/signal.h>
+
+/* Type of a signal handler. */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+/* Fake signal functions */
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
struct sigaction {
unsigned int sa_flags;
diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h
index 0e00dd4..fb78773 100644
--- a/include/asm-mips/sn/sn0/arch.h
+++ b/include/asm-mips/sn/sn0/arch.h
@@ -74,13 +74,8 @@
#define MAX_MEM_SLOTS 32 /* max slots per node */
#endif /* defined(N_MODE) */
-#if SABLE_RTL
-#define SLOT_SHIFT (28)
-#define SLOT_MIN_MEM_SIZE (16*1024*1024)
-#else
#define SLOT_SHIFT (27)
#define SLOT_MIN_MEM_SIZE (32*1024*1024)
-#endif
#define CPUS_PER_NODE 2 /* CPUs on a single hub */
#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */
diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h
index 753b662..0bb31e5 100644
--- a/include/asm-mips/socket.h
+++ b/include/asm-mips/socket.h
@@ -37,8 +37,6 @@
#define SO_ERROR 0x1007 /* get error status and clear */
#define SO_SNDBUF 0x1001 /* Send buffer size. */
#define SO_RCVBUF 0x1002 /* Receive buffer. */
-#define SO_SNDBUFFORCE 0x100a
-#define SO_RCVBUFFORCE 0x100b
#define SO_SNDLOWAT 0x1003 /* send low-water mark */
#define SO_RCVLOWAT 0x1004 /* receive low-water mark */
#define SO_SNDTIMEO 0x1005 /* send timeout */
@@ -69,6 +67,8 @@
#define SCM_TIMESTAMP SO_TIMESTAMP
#define SO_PEERSEC 30
+#define SO_SNDBUFFORCE 31
+#define SO_RCVBUFFORCE 33
#ifdef __KERNEL__
@@ -92,6 +92,7 @@
SOCK_RAW = 3,
SOCK_RDM = 4,
SOCK_SEQPACKET = 5,
+ SOCK_DCCP = 6,
SOCK_PACKET = 10,
};
diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h
index 4d0135b..669b8e3 100644
--- a/include/asm-mips/spinlock.h
+++ b/include/asm-mips/spinlock.h
@@ -9,17 +9,16 @@
#ifndef _ASM_SPINLOCK_H
#define _ASM_SPINLOCK_H
-#include <linux/config.h>
#include <asm/war.h>
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
*/
-#define __raw_spin_is_locked(x) ((x)->lock != 0)
+#define __raw_spin_is_locked(x) ((x)->lock != 0)
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
#define __raw_spin_unlock_wait(x) \
- do { cpu_relax(); } while ((x)->lock)
+ do { cpu_relax(); } while ((x)->lock)
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
@@ -119,6 +118,18 @@
* read-locks.
*/
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(rw) ((rw)->lock >= 0)
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
unsigned int tmp;
@@ -197,8 +208,7 @@
" lui %1, 0x8000 \n"
" sc %1, %0 \n"
" beqzl %1, 1b \n"
- " nop \n"
- " sync \n"
+ " sync \n"
" .set reorder \n"
: "=m" (rw->lock), "=&r" (tmp)
: "m" (rw->lock)
@@ -211,8 +221,7 @@
" lui %1, 0x8000 \n"
" sc %1, %0 \n"
" beqz %1, 1b \n"
- " nop \n"
- " sync \n"
+ " sync \n"
" .set reorder \n"
: "=m" (rw->lock), "=&r" (tmp)
: "m" (rw->lock)
@@ -246,8 +255,7 @@
" lui %1, 0x8000 \n"
" sc %1, %0 \n"
" beqzl %1, 1b \n"
- " nop \n"
- " sync \n"
+ " sync \n"
" li %2, 1 \n"
" .set reorder \n"
"2: \n"
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 7b5e646..a8919dc 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -60,7 +60,6 @@
mfc0 k0, CP0_CONTEXT
lui k1, %hi(kernelsp)
srl k0, k0, 23
- sll k0, k0, 2
addu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
@@ -76,9 +75,14 @@
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
MFC0 k1, CP0_CONTEXT
+ lui k0, %highest(kernelsp)
dsrl k1, 23
- dsll k1, k1, 3
- LONG_L k1, kernelsp(k1)
+ daddiu k0, %higher(kernelsp)
+ dsll k0, k0, 16
+ daddiu k0, %hi(kernelsp)
+ dsll k0, k0, 16
+ daddu k1, k1, k0
+ LONG_L k1, %lo(kernelsp)(k1)
#endif
.endm
@@ -86,25 +90,28 @@
#ifdef CONFIG_32BIT
mfc0 \temp, CP0_CONTEXT
srl \temp, 23
- sll \temp, 2
- LONG_S \stackp, kernelsp(\temp)
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
lw \temp, TI_CPU(gp)
dsll \temp, 3
- lui \temp2, %hi(kernelsp)
- daddu \temp, \temp2
- LONG_S \stackp, %lo(kernelsp)(\temp)
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
- lw \temp, TI_CPU(gp)
- dsll \temp, 3
- LONG_S \stackp, kernelsp(\temp)
+ MFC0 \temp, CP0_CONTEXT
+ dsrl \temp, 23
#endif
+ LONG_S \stackp, kernelsp(\temp)
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
+#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
+ lui k1, %highest(kernelsp)
+ daddiu k1, %higher(kernelsp)
+ dsll k1, k1, 16
+ daddiu k1, %hi(kernelsp)
+ dsll k1, k1, 16
+#else
lui k1, %hi(kernelsp)
+#endif
LONG_L k1, %lo(kernelsp)(k1)
.endm
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 6663efd..330c4e4 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -17,6 +17,7 @@
#include <asm/addrspace.h>
#include <asm/cpu-features.h>
+#include <asm/dsp.h>
#include <asm/ptrace.h>
#include <asm/war.h>
#include <asm/interrupt.h>
@@ -70,7 +71,7 @@
* does not enforce ordering, since there is no data dependency between
* the read of "a" and the read of "b". Therefore, on some CPUs, such
* as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like thiswhere there are no data dependencies.
+ * in cases like this where there are no data dependencies.
*/
#define read_barrier_depends() do { } while(0)
@@ -154,15 +155,15 @@
struct task_struct;
-#define switch_to(prev,next,last) \
-do { \
- (last) = resume(prev, next, next->thread_info); \
+#define switch_to(prev,next,last) \
+do { \
+ if (cpu_has_dsp) \
+ __save_dsp(prev); \
+ (last) = resume(prev, next, next->thread_info); \
+ if (cpu_has_dsp) \
+ __restore_dsp(current); \
} while(0)
-#define ROT_IN_PIECES \
- " .set noreorder \n" \
- " .set reorder \n"
-
static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
{
__u32 retval;
@@ -171,14 +172,17 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %3 # xchg_u32 \n"
+ " .set mips0 \n"
" move %2, %z4 \n"
+ " .set mips3 \n"
" sc %2, %1 \n"
" beqzl %2, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -186,13 +190,17 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %3 # xchg_u32 \n"
+ " .set mips0 \n"
" move %2, %z4 \n"
+ " .set mips3 \n"
" sc %2, %1 \n"
" beqz %2, 1b \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -217,14 +225,15 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %3 # xchg_u64 \n"
" move %2, %z4 \n"
" scd %2, %1 \n"
" beqzl %2, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -232,6 +241,7 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %3 # xchg_u64 \n"
" move %2, %z4 \n"
" scd %2, %1 \n"
@@ -239,6 +249,7 @@
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -286,34 +297,41 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: ll %0, %2 # __cmpxchg_u32 \n"
" bne %0, %z3, 2f \n"
+ " .set mips0 \n"
" move $1, %z4 \n"
+ " .set mips3 \n"
" sc $1, %1 \n"
" beqzl $1, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: ll %0, %2 # __cmpxchg_u32 \n"
" bne %0, %z3, 2f \n"
+ " .set mips0 \n"
" move $1, %z4 \n"
+ " .set mips3 \n"
" sc $1, %1 \n"
" beqz $1, 1b \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
@@ -338,24 +356,27 @@
if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: lld %0, %2 # __cmpxchg_u64 \n"
" bne %0, %z3, 2f \n"
" move $1, %z4 \n"
" scd $1, %1 \n"
" beqzl $1, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: lld %0, %2 # __cmpxchg_u64 \n"
" bne %0, %z3, 2f \n"
" move $1, %z4 \n"
@@ -365,7 +386,7 @@
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
@@ -406,18 +427,20 @@
#define cmpxchg(ptr,old,new) ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(old), (unsigned long)(new),sizeof(*(ptr))))
+extern void set_handler (unsigned long offset, void *addr, unsigned long len);
+extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len);
+extern void *set_vi_handler (int n, void *addr);
+extern void *set_vi_srs_handler (int n, void *addr, int regset);
extern void *set_except_vector(int n, void *addr);
extern void per_cpu_trap_init(void);
-extern NORET_TYPE void __die(const char *, struct pt_regs *, const char *file,
- const char *func, unsigned long line);
-extern void __die_if_kernel(const char *, struct pt_regs *, const char *file,
- const char *func, unsigned long line);
+extern NORET_TYPE void die(const char *, struct pt_regs *);
-#define die(msg, regs) \
- __die(msg, regs, __FILE__ ":", __FUNCTION__, __LINE__)
-#define die_if_kernel(msg, regs) \
- __die_if_kernel(msg, regs, __FILE__ ":", __FUNCTION__, __LINE__)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
+{
+ if (unlikely(!user_mode(regs)))
+ die(str, regs);
+}
extern int stop_a_enabled;
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index a70cb08..e6c2447 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -26,6 +26,7 @@
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
unsigned long flags; /* low level flags */
+ unsigned long tp_value; /* thread pointer */
__u32 cpu; /* current CPU */
int preempt_count; /* 0 => preemptable, <0 => BUG */
@@ -114,6 +115,7 @@
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */
+#define TIF_SECCOMP 5 /* secure computing */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
@@ -124,13 +126,14 @@
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_WORK_MASK 0x0000ffef /* work to do on
- interrupt/exception return */
-#define _TIF_ALLWORK_MASK 0x8000ffff /* work to do on any return to
- u-space */
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h
index 1790122..d02e019 100644
--- a/include/asm-mips/traps.h
+++ b/include/asm-mips/traps.h
@@ -21,4 +21,7 @@
extern void (*board_be_init)(void);
extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+extern void (*board_nmi_handler_setup)(void);
+extern void (*board_ejtag_handler_setup)(void);
+
#endif /* _ASM_TRAPS_H */
diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/tx4938/rbtx4938.h
new file mode 100644
index 0000000..0fbedaf
--- /dev/null
+++ b/include/asm-mips/tx4938/rbtx4938.h
@@ -0,0 +1,207 @@
+/*
+ * linux/include/asm-mips/tx4938/rbtx4938.h
+ * Definitions for TX4937/TX4938
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TX_BOARDS_RBTX4938_H
+#define __ASM_TX_BOARDS_RBTX4938_H
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/tx4938.h>
+
+/* CS */
+#define RBTX4938_CE0 0x1c000000 /* 64M */
+#define RBTX4938_CE2 0x17f00000 /* 1M */
+
+/* Address map */
+#define RBTX4938_FPGA_REG_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000000)
+#define RBTX4938_FPGA_REV_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000002)
+#define RBTX4938_CONFIG1_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000004)
+#define RBTX4938_CONFIG2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000006)
+#define RBTX4938_CONFIG3_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000008)
+#define RBTX4938_LED_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001000)
+#define RBTX4938_DIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001002)
+#define RBTX4938_BDIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001004)
+#define RBTX4938_IMASK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002000)
+#define RBTX4938_IMASK2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002002)
+#define RBTX4938_INTPOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002004)
+#define RBTX4938_ISTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002006)
+#define RBTX4938_ISTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002008)
+#define RBTX4938_IMSTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200a)
+#define RBTX4938_IMSTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200c)
+#define RBTX4938_SOFTINT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00003000)
+#define RBTX4938_PIOSEL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005000)
+#define RBTX4938_SPICS_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005002)
+#define RBTX4938_SFPWR_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005008)
+#define RBTX4938_SFVOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000500a)
+#define RBTX4938_SOFTRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007000)
+#define RBTX4938_SOFTRESETLOCK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007002)
+#define RBTX4938_PCIRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007004)
+#define RBTX4938_ETHER_BASE (KSEG1 + RBTX4938_CE2 + 0x00020000)
+
+/* Ethernet port address (Jumperless Mode (W12:Open)) */
+#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4938_INTB_PCID 0
+#define RBTX4938_INTB_PCIC 1
+#define RBTX4938_INTB_PCIB 2
+#define RBTX4938_INTB_PCIA 3
+#define RBTX4938_INTB_RTC 4
+#define RBTX4938_INTB_ATA 5
+#define RBTX4938_INTB_MODEM 6
+#define RBTX4938_INTB_SWINT 7
+#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID)
+#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC)
+#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB)
+#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA)
+#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC)
+#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA)
+#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM)
+#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT)
+
+#define rbtx4938_fpga_rev_ptr \
+ ((volatile unsigned char *)RBTX4938_FPGA_REV_ADDR)
+#define rbtx4938_led_ptr \
+ ((volatile unsigned char *)RBTX4938_LED_ADDR)
+#define rbtx4938_dipsw_ptr \
+ ((volatile unsigned char *)RBTX4938_DIPSW_ADDR)
+#define rbtx4938_bdipsw_ptr \
+ ((volatile unsigned char *)RBTX4938_BDIPSW_ADDR)
+#define rbtx4938_imask_ptr \
+ ((volatile unsigned char *)RBTX4938_IMASK_ADDR)
+#define rbtx4938_imask2_ptr \
+ ((volatile unsigned char *)RBTX4938_IMASK2_ADDR)
+#define rbtx4938_intpol_ptr \
+ ((volatile unsigned char *)RBTX4938_INTPOL_ADDR)
+#define rbtx4938_istat_ptr \
+ ((volatile unsigned char *)RBTX4938_ISTAT_ADDR)
+#define rbtx4938_istat2_ptr \
+ ((volatile unsigned char *)RBTX4938_ISTAT2_ADDR)
+#define rbtx4938_imstat_ptr \
+ ((volatile unsigned char *)RBTX4938_IMSTAT_ADDR)
+#define rbtx4938_imstat2_ptr \
+ ((volatile unsigned char *)RBTX4938_IMSTAT2_ADDR)
+#define rbtx4938_softint_ptr \
+ ((volatile unsigned char *)RBTX4938_SOFTINT_ADDR)
+#define rbtx4938_piosel_ptr \
+ ((volatile unsigned char *)RBTX4938_PIOSEL_ADDR)
+#define rbtx4938_spics_ptr \
+ ((volatile unsigned char *)RBTX4938_SPICS_ADDR)
+#define rbtx4938_sfpwr_ptr \
+ ((volatile unsigned char *)RBTX4938_SFPWR_ADDR)
+#define rbtx4938_sfvol_ptr \
+ ((volatile unsigned char *)RBTX4938_SFVOL_ADDR)
+#define rbtx4938_softreset_ptr \
+ ((volatile unsigned char *)RBTX4938_SOFTRESET_ADDR)
+#define rbtx4938_softresetlock_ptr \
+ ((volatile unsigned char *)RBTX4938_SOFTRESETLOCK_ADDR)
+#define rbtx4938_pcireset_ptr \
+ ((volatile unsigned char *)RBTX4938_PCIRESET_ADDR)
+
+/* SPI */
+#define RBTX4938_SEEPROM1_CHIPID 0
+#define RBTX4938_SEEPROM2_CHIPID 1
+#define RBTX4938_SEEPROM3_CHIPID 2
+#define RBTX4938_SRTC_CHIPID 3
+
+/*
+ * IRQ mappings
+ */
+
+#define RBTX4938_SOFT_INT0 0 /* not used */
+#define RBTX4938_SOFT_INT1 1 /* not used */
+#define RBTX4938_IRC_INT 2
+#define RBTX4938_TIMER_INT 7
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define RBTX4938_NR_IRQ_LOCAL 8
+#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */
+#define RBTX4938_NR_IRQ_IOC 8
+
+#define MI8259_IRQ_ISA_RAW_BEG 0 /* optional backplane i8259 */
+#define MI8259_IRQ_ISA_RAW_END 15
+#define TX4938_IRQ_CP0_RAW_BEG 0 /* tx4938 cpu built-in cp0 */
+#define TX4938_IRQ_CP0_RAW_END 7
+#define TX4938_IRQ_PIC_RAW_BEG 0 /* tx4938 cpu build-in pic */
+#define TX4938_IRQ_PIC_RAW_END 31
+
+#define MI8259_IRQ_ISA_BEG MI8259_IRQ_ISA_RAW_BEG /* 0 */
+#define MI8259_IRQ_ISA_END MI8259_IRQ_ISA_RAW_END /* 15 */
+
+#define TX4938_IRQ_CP0_BEG ((MI8259_IRQ_ISA_END+1)+TX4938_IRQ_CP0_RAW_BEG) /* 16 */
+#define TX4938_IRQ_CP0_END ((MI8259_IRQ_ISA_END+1)+TX4938_IRQ_CP0_RAW_END) /* 23 */
+
+#define TX4938_IRQ_PIC_BEG ((TX4938_IRQ_CP0_END+1)+TX4938_IRQ_PIC_RAW_BEG) /* 24 */
+#define TX4938_IRQ_PIC_END ((TX4938_IRQ_CP0_END+1)+TX4938_IRQ_PIC_RAW_END) /* 55 */
+#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2)
+#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2)
+#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0)
+#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1)
+#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7)
+
+#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0
+#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7
+
+#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */
+#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */
+#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG
+#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL)
+#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC)
+#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
+
+#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0)
+#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1)
+#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT)
+#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT)
+#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
+#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
+#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
+#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
+#define RBTX4938_IRQ_IRC_DMA(ch,n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch,n))
+#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO)
+#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
+#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
+#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
+#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
+#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
+#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
+#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
+#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
+#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
+#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI)
+#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID)
+#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC)
+#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB)
+#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA)
+#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC)
+#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA)
+#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM)
+#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT)
+
+
+/* IOC (PCI, etc) */
+#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC)
+/* Onboard 10M Ether */
+#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1)
+
+#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
+#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER)
+
+/* IRCR : Int. Control */
+#define TX4938_IRCR_LOW 0x00000000
+#define TX4938_IRCR_HIGH 0x00000001
+#define TX4938_IRCR_DOWN 0x00000002
+#define TX4938_IRCR_UP 0x00000003
+
+#endif /* __ASM_TX_BOARDS_RBTX4938_H */
diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/tx4938/spi.h
new file mode 100644
index 0000000..0dbbab8
--- /dev/null
+++ b/include/asm-mips/tx4938/spi.h
@@ -0,0 +1,74 @@
+/*
+ * linux/include/asm-mips/tx4938/spi.h
+ * Definitions for TX4937/TX4938 SPI
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TX_BOARDS_TX4938_SPI_H
+#define __ASM_TX_BOARDS_TX4938_SPI_H
+
+/* SPI */
+struct spi_dev_desc {
+ unsigned int baud;
+ unsigned short tcss, tcsh, tcsr; /* CS setup/hold/recovery time */
+ unsigned int byteorder:1; /* 0:LSB-First, 1:MSB-First */
+ unsigned int polarity:1; /* 0:High-Active */
+ unsigned int phase:1; /* 0:Sample-Then-Shift */
+};
+
+extern void txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on)) __init;
+extern void txx9_spi_irqinit(int irc_irq) __init;
+extern int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
+ unsigned char **inbufs, unsigned int *incounts,
+ unsigned char **outbufs, unsigned int *outcounts,
+ int cansleep);
+extern int spi_eeprom_write_enable(int chipid, int enable);
+extern int spi_eeprom_read_status(int chipid);
+extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
+extern int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len);
+extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid) __init;
+
+#define TXX9_IMCLK (txx9_gbus_clock / 2)
+
+/*
+* SPI
+*/
+
+/* SPMCR : SPI Master Control */
+#define TXx9_SPMCR_OPMODE 0xc0
+#define TXx9_SPMCR_CONFIG 0x40
+#define TXx9_SPMCR_ACTIVE 0x80
+#define TXx9_SPMCR_SPSTP 0x02
+#define TXx9_SPMCR_BCLR 0x01
+
+/* SPCR0 : SPI Status */
+#define TXx9_SPCR0_TXIFL_MASK 0xc000
+#define TXx9_SPCR0_RXIFL_MASK 0x3000
+#define TXx9_SPCR0_SIDIE 0x0800
+#define TXx9_SPCR0_SOEIE 0x0400
+#define TXx9_SPCR0_RBSIE 0x0200
+#define TXx9_SPCR0_TBSIE 0x0100
+#define TXx9_SPCR0_IFSPSE 0x0010
+#define TXx9_SPCR0_SBOS 0x0004
+#define TXx9_SPCR0_SPHA 0x0002
+#define TXx9_SPCR0_SPOL 0x0001
+
+/* SPSR : SPI Status */
+#define TXx9_SPSR_TBSI 0x8000
+#define TXx9_SPSR_RBSI 0x4000
+#define TXx9_SPSR_TBS_MASK 0x3800
+#define TXx9_SPSR_RBS_MASK 0x0700
+#define TXx9_SPSR_SPOE 0x0080
+#define TXx9_SPSR_IFSD 0x0008
+#define TXx9_SPSR_SIDLE 0x0004
+#define TXx9_SPSR_STRDY 0x0002
+#define TXx9_SPSR_SRRDY 0x0001
+
+#endif /* __ASM_TX_BOARDS_TX4938_SPI_H */
diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/tx4938/tx4938.h
new file mode 100644
index 0000000..e25b1a0
--- /dev/null
+++ b/include/asm-mips/tx4938/tx4938.h
@@ -0,0 +1,706 @@
+/*
+ * linux/include/asm-mips/tx4938/tx4938.h
+ * Definitions for TX4937/TX4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TX_BOARDS_TX4938_H
+#define __ASM_TX_BOARDS_TX4938_H
+
+#include <asm/tx4938/tx4938_mips.h>
+
+#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr))
+#define tx4938_write_nfmc(b,addr) (*(volatile unsigned int *)(addr)) = (b)
+
+#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG
+
+#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC)
+#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR)
+
+#define TX4938_PCIIO_0 0x10000000
+#define TX4938_PCIIO_1 0x01010000
+#define TX4938_PCIMEM_0 0x08000000
+#define TX4938_PCIMEM_1 0x11000000
+
+#define TX4938_PCIIO_SIZE_0 0x01000000
+#define TX4938_PCIIO_SIZE_1 0x00010000
+#define TX4938_PCIMEM_SIZE_0 0x08000000
+#define TX4938_PCIMEM_SIZE_1 0x00010000
+
+#define TX4938_REG_BASE 0xff1f0000 /* == TX4937_REG_BASE */
+#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */
+
+/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
+#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000)
+#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000)
+#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000)
+#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000)
+#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000)
+#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000)
+#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000)
+#define TX4938_NR_TMR 3
+#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100)
+#define TX4938_NR_SIO 2
+#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100)
+#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500)
+#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600)
+#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700)
+#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800)
+
+#ifndef _LANGUAGE_ASSEMBLY
+#include <asm/byteorder.h>
+
+#define TX4938_MKA(x) ((u32)( ((u32)(TX4938_REG_BASE)) | ((u32)(x)) ))
+
+#define TX4938_RD08( reg ) (*(vu08*)(reg))
+#define TX4938_WR08( reg, val ) ((*(vu08*)(reg))=(val))
+
+#define TX4938_RD16( reg ) (*(vu16*)(reg))
+#define TX4938_WR16( reg, val ) ((*(vu16*)(reg))=(val))
+
+#define TX4938_RD32( reg ) (*(vu32*)(reg))
+#define TX4938_WR32( reg, val ) ((*(vu32*)(reg))=(val))
+
+#define TX4938_RD64( reg ) (*(vu64*)(reg))
+#define TX4938_WR64( reg, val ) ((*(vu64*)(reg))=(val))
+
+#define TX4938_RD( reg ) TX4938_RD32( reg )
+#define TX4938_WR( reg, val ) TX4938_WR32( reg, val )
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+#define _CONST64(c) c
+#else
+#define _CONST64(c) c##ull
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN
+#define endian_def_l2(e1,e2) \
+ volatile unsigned long e1,e2
+#define endian_def_s2(e1,e2) \
+ volatile unsigned short e1,e2
+#define endian_def_sb2(e1,e2,e3) \
+ volatile unsigned short e1;volatile unsigned char e2,e3
+#define endian_def_b2s(e1,e2,e3) \
+ volatile unsigned char e1,e2;volatile unsigned short e3
+#define endian_def_b4(e1,e2,e3,e4) \
+ volatile unsigned char e1,e2,e3,e4
+#else
+#define endian_def_l2(e1,e2) \
+ volatile unsigned long e2,e1
+#define endian_def_s2(e1,e2) \
+ volatile unsigned short e2,e1
+#define endian_def_sb2(e1,e2,e3) \
+ volatile unsigned char e3,e2;volatile unsigned short e1
+#define endian_def_b2s(e1,e2,e3) \
+ volatile unsigned short e3;volatile unsigned char e2,e1
+#define endian_def_b4(e1,e2,e3,e4) \
+ volatile unsigned char e4,e3,e2,e1
+#endif
+
+
+struct tx4938_sdramc_reg {
+ volatile unsigned long long cr[4];
+ volatile unsigned long long unused0[4];
+ volatile unsigned long long tr;
+ volatile unsigned long long unused1[2];
+ volatile unsigned long long cmd;
+ volatile unsigned long long sfcmd;
+};
+
+struct tx4938_ebusc_reg {
+ volatile unsigned long long cr[8];
+};
+
+struct tx4938_dma_reg {
+ struct tx4938_dma_ch_reg {
+ volatile unsigned long long cha;
+ volatile unsigned long long sar;
+ volatile unsigned long long dar;
+ endian_def_l2(unused0, cntr);
+ endian_def_l2(unused1, sair);
+ endian_def_l2(unused2, dair);
+ endian_def_l2(unused3, ccr);
+ endian_def_l2(unused4, csr);
+ } ch[4];
+ volatile unsigned long long dbr[8];
+ volatile unsigned long long tdhr;
+ volatile unsigned long long midr;
+ endian_def_l2(unused0, mcr);
+};
+
+struct tx4938_pcic_reg {
+ volatile unsigned long pciid;
+ volatile unsigned long pcistatus;
+ volatile unsigned long pciccrev;
+ volatile unsigned long pcicfg1;
+ volatile unsigned long p2gm0plbase; /* +10 */
+ volatile unsigned long p2gm0pubase;
+ volatile unsigned long p2gm1plbase;
+ volatile unsigned long p2gm1pubase;
+ volatile unsigned long p2gm2pbase; /* +20 */
+ volatile unsigned long p2giopbase;
+ volatile unsigned long unused0;
+ volatile unsigned long pcisid;
+ volatile unsigned long unused1; /* +30 */
+ volatile unsigned long pcicapptr;
+ volatile unsigned long unused2;
+ volatile unsigned long pcicfg2;
+ volatile unsigned long g2ptocnt; /* +40 */
+ volatile unsigned long unused3[15];
+ volatile unsigned long g2pstatus; /* +80 */
+ volatile unsigned long g2pmask;
+ volatile unsigned long pcisstatus;
+ volatile unsigned long pcimask;
+ volatile unsigned long p2gcfg; /* +90 */
+ volatile unsigned long p2gstatus;
+ volatile unsigned long p2gmask;
+ volatile unsigned long p2gccmd;
+ volatile unsigned long unused4[24]; /* +a0 */
+ volatile unsigned long pbareqport; /* +100 */
+ volatile unsigned long pbacfg;
+ volatile unsigned long pbastatus;
+ volatile unsigned long pbamask;
+ volatile unsigned long pbabm; /* +110 */
+ volatile unsigned long pbacreq;
+ volatile unsigned long pbacgnt;
+ volatile unsigned long pbacstate;
+ volatile unsigned long long g2pmgbase[3]; /* +120 */
+ volatile unsigned long long g2piogbase;
+ volatile unsigned long g2pmmask[3]; /* +140 */
+ volatile unsigned long g2piomask;
+ volatile unsigned long long g2pmpbase[3]; /* +150 */
+ volatile unsigned long long g2piopbase;
+ volatile unsigned long pciccfg; /* +170 */
+ volatile unsigned long pcicstatus;
+ volatile unsigned long pcicmask;
+ volatile unsigned long unused5;
+ volatile unsigned long long p2gmgbase[3]; /* +180 */
+ volatile unsigned long long p2giogbase;
+ volatile unsigned long g2pcfgadrs; /* +1a0 */
+ volatile unsigned long g2pcfgdata;
+ volatile unsigned long unused6[8];
+ volatile unsigned long g2pintack;
+ volatile unsigned long g2pspc;
+ volatile unsigned long unused7[12]; /* +1d0 */
+ volatile unsigned long long pdmca; /* +200 */
+ volatile unsigned long long pdmga;
+ volatile unsigned long long pdmpa;
+ volatile unsigned long long pdmctr;
+ volatile unsigned long long pdmcfg; /* +220 */
+ volatile unsigned long long pdmsts;
+};
+
+struct tx4938_aclc_reg {
+ volatile unsigned long acctlen;
+ volatile unsigned long acctldis;
+ volatile unsigned long acregacc;
+ volatile unsigned long unused0;
+ volatile unsigned long acintsts;
+ volatile unsigned long acintmsts;
+ volatile unsigned long acinten;
+ volatile unsigned long acintdis;
+ volatile unsigned long acsemaph;
+ volatile unsigned long unused1[7];
+ volatile unsigned long acgpidat;
+ volatile unsigned long acgpodat;
+ volatile unsigned long acslten;
+ volatile unsigned long acsltdis;
+ volatile unsigned long acfifosts;
+ volatile unsigned long unused2[11];
+ volatile unsigned long acdmasts;
+ volatile unsigned long acdmasel;
+ volatile unsigned long unused3[6];
+ volatile unsigned long acaudodat;
+ volatile unsigned long acsurrdat;
+ volatile unsigned long accentdat;
+ volatile unsigned long aclfedat;
+ volatile unsigned long acaudiat;
+ volatile unsigned long unused4;
+ volatile unsigned long acmodoat;
+ volatile unsigned long acmodidat;
+ volatile unsigned long unused5[15];
+ volatile unsigned long acrevid;
+};
+
+
+struct tx4938_tmr_reg {
+ volatile unsigned long tcr;
+ volatile unsigned long tisr;
+ volatile unsigned long cpra;
+ volatile unsigned long cprb;
+ volatile unsigned long itmr;
+ volatile unsigned long unused0[3];
+ volatile unsigned long ccdr;
+ volatile unsigned long unused1[3];
+ volatile unsigned long pgmr;
+ volatile unsigned long unused2[3];
+ volatile unsigned long wtmr;
+ volatile unsigned long unused3[43];
+ volatile unsigned long trr;
+};
+
+struct tx4938_sio_reg {
+ volatile unsigned long lcr;
+ volatile unsigned long dicr;
+ volatile unsigned long disr;
+ volatile unsigned long cisr;
+ volatile unsigned long fcr;
+ volatile unsigned long flcr;
+ volatile unsigned long bgr;
+ volatile unsigned long tfifo;
+ volatile unsigned long rfifo;
+};
+
+struct tx4938_pio_reg {
+ volatile unsigned long dout;
+ volatile unsigned long din;
+ volatile unsigned long dir;
+ volatile unsigned long od;
+ volatile unsigned long flag[2];
+ volatile unsigned long pol;
+ volatile unsigned long intc;
+ volatile unsigned long maskcpu;
+ volatile unsigned long maskext;
+};
+struct tx4938_irc_reg {
+ volatile unsigned long cer;
+ volatile unsigned long cr[2];
+ volatile unsigned long unused0;
+ volatile unsigned long ilr[8];
+ volatile unsigned long unused1[4];
+ volatile unsigned long imr;
+ volatile unsigned long unused2[7];
+ volatile unsigned long scr;
+ volatile unsigned long unused3[7];
+ volatile unsigned long ssr;
+ volatile unsigned long unused4[7];
+ volatile unsigned long csr;
+};
+
+struct tx4938_ndfmc_reg {
+ endian_def_l2(unused0, dtr);
+ endian_def_l2(unused1, mcr);
+ endian_def_l2(unused2, sr);
+ endian_def_l2(unused3, isr);
+ endian_def_l2(unused4, imr);
+ endian_def_l2(unused5, spr);
+ endian_def_l2(unused6, rstr);
+};
+
+struct tx4938_spi_reg {
+ volatile unsigned long mcr;
+ volatile unsigned long cr0;
+ volatile unsigned long cr1;
+ volatile unsigned long fs;
+ volatile unsigned long unused1;
+ volatile unsigned long sr;
+ volatile unsigned long dr;
+ volatile unsigned long unused2;
+};
+
+struct tx4938_sramc_reg {
+ volatile unsigned long long cr;
+};
+
+struct tx4938_ccfg_reg {
+ volatile unsigned long long ccfg;
+ volatile unsigned long long crir;
+ volatile unsigned long long pcfg;
+ volatile unsigned long long tear;
+ volatile unsigned long long clkctr;
+ volatile unsigned long long unused0;
+ volatile unsigned long long garbc;
+ volatile unsigned long long unused1;
+ volatile unsigned long long unused2;
+ volatile unsigned long long ramp;
+ volatile unsigned long long unused3;
+ volatile unsigned long long jmpadr;
+};
+
+#undef endian_def_l2
+#undef endian_def_s2
+#undef endian_def_sb2
+#undef endian_def_b2s
+#undef endian_def_b4
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * NDFMC
+ */
+
+/* NDFMCR : NDFMC Mode Control */
+#define TX4938_NDFMCR_WE 0x80
+#define TX4938_NDFMCR_ECC_ALL 0x60
+#define TX4938_NDFMCR_ECC_RESET 0x60
+#define TX4938_NDFMCR_ECC_READ 0x40
+#define TX4938_NDFMCR_ECC_ON 0x20
+#define TX4938_NDFMCR_ECC_OFF 0x00
+#define TX4938_NDFMCR_CE 0x10
+#define TX4938_NDFMCR_BSPRT 0x04
+#define TX4938_NDFMCR_ALE 0x02
+#define TX4938_NDFMCR_CLE 0x01
+
+/* NDFMCR : NDFMC Status */
+#define TX4938_NDFSR_BUSY 0x80
+
+/* NDFMCR : NDFMC Reset */
+#define TX4938_NDFRSTR_RST 0x01
+
+/*
+ * IRC
+ */
+
+#define TX4938_IR_ECCERR 0
+#define TX4938_IR_WTOERR 1
+#define TX4938_NUM_IR_INT 6
+#define TX4938_IR_INT(n) (2 + (n))
+#define TX4938_NUM_IR_SIO 2
+#define TX4938_IR_SIO(n) (8 + (n))
+#define TX4938_NUM_IR_DMA 4
+#define TX4938_IR_DMA(ch,n) ((ch ? 27 : 10) + (n)) /* 10-13,27-30 */
+#define TX4938_IR_PIO 14
+#define TX4938_IR_PDMAC 15
+#define TX4938_IR_PCIC 16
+#define TX4938_NUM_IR_TMR 3
+#define TX4938_IR_TMR(n) (17 + (n))
+#define TX4938_IR_NDFMC 21
+#define TX4938_IR_PCIERR 22
+#define TX4938_IR_PCIPME 23
+#define TX4938_IR_ACLC 24
+#define TX4938_IR_ACLCPME 25
+#define TX4938_IR_PCIC1 26
+#define TX4938_IR_SPI 31
+#define TX4938_NUM_IR 32
+/* multiplex */
+#define TX4938_IR_ETH0 TX4938_IR_INT(4)
+#define TX4938_IR_ETH1 TX4938_IR_INT(3)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4938_CCFG_WDRST _CONST64(0x0000020000000000)
+#define TX4938_CCFG_WDREXEN _CONST64(0x0000010000000000)
+#define TX4938_CCFG_BCFG_MASK _CONST64(0x000000ff00000000)
+#define TX4938_CCFG_TINTDIS 0x01000000
+#define TX4938_CCFG_PCI66 0x00800000
+#define TX4938_CCFG_PCIMODE 0x00400000
+#define TX4938_CCFG_PCI1_66 0x00200000
+#define TX4938_CCFG_DIVMODE_MASK 0x001e0000
+#define TX4938_CCFG_DIVMODE_2 (0x4 << 17)
+#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17)
+#define TX4938_CCFG_DIVMODE_3 (0x5 << 17)
+#define TX4938_CCFG_DIVMODE_4 (0x6 << 17)
+#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17)
+#define TX4938_CCFG_DIVMODE_8 (0x0 << 17)
+#define TX4938_CCFG_DIVMODE_10 (0xb << 17)
+#define TX4938_CCFG_DIVMODE_12 (0x1 << 17)
+#define TX4938_CCFG_DIVMODE_16 (0x2 << 17)
+#define TX4938_CCFG_DIVMODE_18 (0x9 << 17)
+#define TX4938_CCFG_BEOW 0x00010000
+#define TX4938_CCFG_WR 0x00008000
+#define TX4938_CCFG_TOE 0x00004000
+#define TX4938_CCFG_PCIXARB 0x00002000
+#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00
+#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10)
+#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10)
+#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10)
+#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10)
+#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10)
+#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10)
+#define TX4938_CCFG_PCI1DMD 0x00000100
+#define TX4938_CCFG_SYSSP_MASK 0x000000c0
+#define TX4938_CCFG_ENDIAN 0x00000004
+#define TX4938_CCFG_HALT 0x00000002
+#define TX4938_CCFG_ACEHOLD 0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4938_PCFG_ETH0_SEL _CONST64(0x8000000000000000)
+#define TX4938_PCFG_ETH1_SEL _CONST64(0x4000000000000000)
+#define TX4938_PCFG_ATA_SEL _CONST64(0x2000000000000000)
+#define TX4938_PCFG_ISA_SEL _CONST64(0x1000000000000000)
+#define TX4938_PCFG_SPI_SEL _CONST64(0x0800000000000000)
+#define TX4938_PCFG_NDF_SEL _CONST64(0x0400000000000000)
+#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000
+#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28)
+#define TX4938_PCFG_SYSCLKEN 0x08000000
+#define TX4938_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
+#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000
+#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
+#define TX4938_PCFG_SEL2 0x00000200
+#define TX4938_PCFG_SEL1 0x00000100
+#define TX4938_PCFG_DMASEL_ALL 0x0000000f
+#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000
+#define TX4938_PCFG_DMASEL0_SIO1 0x00000001
+#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000
+#define TX4938_PCFG_DMASEL1_SIO1 0x00000002
+#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000
+#define TX4938_PCFG_DMASEL2_SIO0 0x00000004
+#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000
+#define TX4938_PCFG_DMASEL3_SIO0 0x00000008
+
+/* CLKCTR : Clock Control */
+#define TX4938_CLKCTR_NDFCKD _CONST64(0x0001000000000000)
+#define TX4938_CLKCTR_NDFRST _CONST64(0x0000000100000000)
+#define TX4938_CLKCTR_ETH1CKD 0x80000000
+#define TX4938_CLKCTR_ETH0CKD 0x40000000
+#define TX4938_CLKCTR_SPICKD 0x20000000
+#define TX4938_CLKCTR_SRAMCKD 0x10000000
+#define TX4938_CLKCTR_PCIC1CKD 0x08000000
+#define TX4938_CLKCTR_DMA1CKD 0x04000000
+#define TX4938_CLKCTR_ACLCKD 0x02000000
+#define TX4938_CLKCTR_PIOCKD 0x01000000
+#define TX4938_CLKCTR_DMACKD 0x00800000
+#define TX4938_CLKCTR_PCICKD 0x00400000
+#define TX4938_CLKCTR_TM0CKD 0x00100000
+#define TX4938_CLKCTR_TM1CKD 0x00080000
+#define TX4938_CLKCTR_TM2CKD 0x00040000
+#define TX4938_CLKCTR_SIO0CKD 0x00020000
+#define TX4938_CLKCTR_SIO1CKD 0x00010000
+#define TX4938_CLKCTR_ETH1RST 0x00008000
+#define TX4938_CLKCTR_ETH0RST 0x00004000
+#define TX4938_CLKCTR_SPIRST 0x00002000
+#define TX4938_CLKCTR_SRAMRST 0x00001000
+#define TX4938_CLKCTR_PCIC1RST 0x00000800
+#define TX4938_CLKCTR_DMA1RST 0x00000400
+#define TX4938_CLKCTR_ACLRST 0x00000200
+#define TX4938_CLKCTR_PIORST 0x00000100
+#define TX4938_CLKCTR_DMARST 0x00000080
+#define TX4938_CLKCTR_PCIRST 0x00000040
+#define TX4938_CLKCTR_TM0RST 0x00000010
+#define TX4938_CLKCTR_TM1RST 0x00000008
+#define TX4938_CLKCTR_TM2RST 0x00000004
+#define TX4938_CLKCTR_SIO0RST 0x00000002
+#define TX4938_CLKCTR_SIO1RST 0x00000001
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003
+#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002
+#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900
+
+/* bits for PBACFG */
+#define TX4938_PCIC_PBACFG_FIXPA 0x00000008
+#define TX4938_PCIC_PBACFG_RPBA 0x00000004
+#define TX4938_PCIC_PBACFG_PBAEN 0x00000002
+#define TX4938_PCIC_PBACFG_BMCEN 0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000)
+
+/* bits for G2PIOGBASE */
+#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000)
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8
+#define TX4938_PCIC_PCICSTATUS_PME 0x00000400
+#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200
+#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100
+#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080
+#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020
+#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010
+#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008
+#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002
+#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001
+
+/* bits for PCICCFG */
+#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000
+#define TX4938_PCIC_PCICCFG_HRST 0x00000800
+#define TX4938_PCIC_PCICCFG_SRST 0x00000400
+#define TX4938_PCIC_PCICCFG_IRBER 0x00000200
+#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch))
+#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100
+#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080
+#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040
+#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020
+#define TX4938_PCIC_PCICCFG_TCAR 0x00000010
+#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000)
+#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000)
+
+/* bits for P2GIOGBASE */
+#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000)
+#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000)
+
+#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
+#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/* bits for PDMCFG */
+#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000
+#define TX4938_PCIC_PDMCFG_EXFER 0x00100000
+#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800
+#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11)
+#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400
+#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200
+#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100
+#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080
+#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040
+#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020
+#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c
+#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000
+#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004
+#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008
+#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002
+#define TX4938_PCIC_PDMCFG_CHRST 0x00000001
+
+/* bits for PDMSTS */
+#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000
+#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000
+#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000
+#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000
+#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800
+#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400
+#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200
+#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100
+#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080
+#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040
+#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020
+#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008
+#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004
+#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002
+#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001
+#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0
+#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch))
+#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch))
+#define TX4938_DMA_MCR_RSFIF 0x00000080
+#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch))
+#define TX4938_DMA_MCR_RPRT 0x00000002
+#define TX4938_DMA_MCR_MSTEN 0x00000001
+
+/* bits for CCRn */
+#define TX4938_DMA_CCR_IMMCHN 0x20000000
+#define TX4938_DMA_CCR_USEXFSZ 0x10000000
+#define TX4938_DMA_CCR_LE 0x08000000
+#define TX4938_DMA_CCR_DBINH 0x04000000
+#define TX4938_DMA_CCR_SBINH 0x02000000
+#define TX4938_DMA_CCR_CHRST 0x01000000
+#define TX4938_DMA_CCR_RVBYTE 0x00800000
+#define TX4938_DMA_CCR_ACKPOL 0x00400000
+#define TX4938_DMA_CCR_REQPL 0x00200000
+#define TX4938_DMA_CCR_EGREQ 0x00100000
+#define TX4938_DMA_CCR_CHDN 0x00080000
+#define TX4938_DMA_CCR_DNCTL 0x00060000
+#define TX4938_DMA_CCR_EXTRQ 0x00010000
+#define TX4938_DMA_CCR_INTRQD 0x0000e000
+#define TX4938_DMA_CCR_INTENE 0x00001000
+#define TX4938_DMA_CCR_INTENC 0x00000800
+#define TX4938_DMA_CCR_INTENT 0x00000400
+#define TX4938_DMA_CCR_CHNEN 0x00000200
+#define TX4938_DMA_CCR_XFACT 0x00000100
+#define TX4938_DMA_CCR_SMPCHN 0x00000020
+#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c)
+#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2)
+#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3)
+#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4)
+#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5)
+#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6)
+#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7)
+#define TX4938_DMA_CCR_MEMIO 0x00000002
+#define TX4938_DMA_CCR_SNGAD 0x00000001
+
+/* bits for CSRn */
+#define TX4938_DMA_CSR_CHNEN 0x00000400
+#define TX4938_DMA_CSR_STLXFER 0x00000200
+#define TX4938_DMA_CSR_CHNACT 0x00000100
+#define TX4938_DMA_CSR_ABCHC 0x00000080
+#define TX4938_DMA_CSR_NCHNC 0x00000040
+#define TX4938_DMA_CSR_NTRNFC 0x00000020
+#define TX4938_DMA_CSR_EXTDN 0x00000010
+#define TX4938_DMA_CSR_CFERR 0x00000008
+#define TX4938_DMA_CSR_CHERR 0x00000004
+#define TX4938_DMA_CSR_DESERR 0x00000002
+#define TX4938_DMA_CSR_SORERR 0x00000001
+
+/* TX4938 Interrupt Controller (32-bit registers) */
+#define TX4938_IRC_BASE 0xf510
+#define TX4938_IRC_IRFLAG0 0xf510
+#define TX4938_IRC_IRFLAG1 0xf514
+#define TX4938_IRC_IRPOL 0xf518
+#define TX4938_IRC_IRRCNT 0xf51c
+#define TX4938_IRC_IRMASKINT 0xf520
+#define TX4938_IRC_IRMASKEXT 0xf524
+#define TX4938_IRC_IRDEN 0xf600
+#define TX4938_IRC_IRDM0 0xf604
+#define TX4938_IRC_IRDM1 0xf608
+#define TX4938_IRC_IRLVL0 0xf610
+#define TX4938_IRC_IRLVL1 0xf614
+#define TX4938_IRC_IRLVL2 0xf618
+#define TX4938_IRC_IRLVL3 0xf61c
+#define TX4938_IRC_IRLVL4 0xf620
+#define TX4938_IRC_IRLVL5 0xf624
+#define TX4938_IRC_IRLVL6 0xf628
+#define TX4938_IRC_IRLVL7 0xf62c
+#define TX4938_IRC_IRMSK 0xf640
+#define TX4938_IRC_IREDC 0xf660
+#define TX4938_IRC_IRPND 0xf680
+#define TX4938_IRC_IRCS 0xf6a0
+#define TX4938_IRC_LIMIT 0xf6ff
+
+
+#ifndef __ASSEMBLY__
+
+#define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG)
+#define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG)
+#define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch))
+#define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG)
+#define tx4938_ircptr ((struct tx4938_irc_reg *)TX4938_IRC_REG)
+#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG)
+#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG)
+#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG)
+#define tx4938_tmrptr(ch) ((struct tx4938_tmr_reg *)TX4938_TMR_REG(ch))
+#define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch))
+#define tx4938_pioptr ((struct tx4938_pio_reg *)TX4938_PIO_REG)
+#define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG)
+#define tx4938_spiptr ((struct tx4938_spi_reg *)TX4938_SPI_REG)
+#define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG)
+
+
+#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff)
+#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16)
+
+#define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21)
+#define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21)
+
+#define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20)
+#define TX4938_EBUSC_SIZE(ch) \
+ (0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf))
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mips/tx4938/tx4938_mips.h b/include/asm-mips/tx4938/tx4938_mips.h
new file mode 100644
index 0000000..cf89b20
--- /dev/null
+++ b/include/asm-mips/tx4938/tx4938_mips.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-mips/tx4938/tx4938_bitmask.h
+ * Generic bitmask definitions
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#ifndef TX4938_TX4938_MIPS_H
+#define TX4938_TX4938_MIPS_H
+#ifndef __ASSEMBLY__
+
+#define reg_rd08(r) ((u8 )(*((vu8 *)(r))))
+#define reg_rd16(r) ((u16)(*((vu16*)(r))))
+#define reg_rd32(r) ((u32)(*((vu32*)(r))))
+#define reg_rd64(r) ((u64)(*((vu64*)(r))))
+
+#define reg_wr08(r,v) ((*((vu8 *)(r)))=((u8 )(v)))
+#define reg_wr16(r,v) ((*((vu16*)(r)))=((u16)(v)))
+#define reg_wr32(r,v) ((*((vu32*)(r)))=((u32)(v)))
+#define reg_wr64(r,v) ((*((vu64*)(r)))=((u64)(v)))
+
+typedef volatile __signed char vs8;
+typedef volatile unsigned char vu8;
+
+typedef volatile __signed short vs16;
+typedef volatile unsigned short vu16;
+
+typedef volatile __signed int vs32;
+typedef volatile unsigned int vu32;
+
+typedef s8 s08;
+typedef vs8 vs08;
+
+typedef u8 u08;
+typedef vu8 vu08;
+
+#if (_MIPS_SZLONG == 64)
+
+typedef volatile __signed__ long vs64;
+typedef volatile unsigned long vu64;
+
+#else
+
+typedef volatile __signed__ long long vs64;
+typedef volatile unsigned long long vu64;
+
+#endif
+#endif
+#endif
diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h
index 5c2c983..41bb96b 100644
--- a/include/asm-mips/uaccess.h
+++ b/include/asm-mips/uaccess.h
@@ -196,63 +196,55 @@
__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
+#define __m(x) (*(struct __large_struct __user *)(x))
/*
* Yuck. We need two variants, one for 64bit operation and one
* for 32 bit mode and old iron.
*/
#ifdef __mips64
-#define __GET_USER_DW(__gu_err) __get_user_asm("ld", __gu_err)
+#define __GET_USER_DW(ptr) __get_user_asm("ld", ptr)
#else
-#define __GET_USER_DW(__gu_err) __get_user_asm_ll32(__gu_err)
+#define __GET_USER_DW(ptr) __get_user_asm_ll32(ptr)
#endif
#define __get_user_nocheck(x,ptr,size) \
({ \
- __typeof(*(ptr)) __gu_val = 0; \
- long __gu_addr; \
+ __typeof(*(ptr)) __gu_val = (__typeof(*(ptr))) 0; \
long __gu_err = 0; \
\
- might_sleep(); \
- __gu_addr = (long) (ptr); \
switch (size) { \
- case 1: __get_user_asm("lb", __gu_err); break; \
- case 2: __get_user_asm("lh", __gu_err); break; \
- case 4: __get_user_asm("lw", __gu_err); break; \
- case 8: __GET_USER_DW(__gu_err); break; \
+ case 1: __get_user_asm("lb", ptr); break; \
+ case 2: __get_user_asm("lh", ptr); break; \
+ case 4: __get_user_asm("lw", ptr); break; \
+ case 8: __GET_USER_DW(ptr); break; \
default: __get_user_unknown(); break; \
} \
- x = (__typeof__(*(ptr))) __gu_val; \
+ (x) = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
#define __get_user_check(x,ptr,size) \
({ \
+ const __typeof__(*(ptr)) __user * __gu_addr = (ptr); \
__typeof__(*(ptr)) __gu_val = 0; \
- long __gu_addr; \
- long __gu_err; \
+ long __gu_err = -EFAULT; \
\
- might_sleep(); \
- __gu_addr = (long) (ptr); \
- __gu_err = access_ok(VERIFY_READ, (void *) __gu_addr, size) \
- ? 0 : -EFAULT; \
- \
- if (likely(!__gu_err)) { \
+ if (likely(access_ok(VERIFY_READ, __gu_addr, size))) { \
switch (size) { \
- case 1: __get_user_asm("lb", __gu_err); break; \
- case 2: __get_user_asm("lh", __gu_err); break; \
- case 4: __get_user_asm("lw", __gu_err); break; \
- case 8: __GET_USER_DW(__gu_err); break; \
+ case 1: __get_user_asm("lb", __gu_addr); break; \
+ case 2: __get_user_asm("lh", __gu_addr); break; \
+ case 4: __get_user_asm("lw", __gu_addr); break; \
+ case 8: __GET_USER_DW(__gu_addr); break; \
default: __get_user_unknown(); break; \
} \
} \
- x = (__typeof__(*(ptr))) __gu_val; \
+ (x) = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
-#define __get_user_asm(insn,__gu_err) \
-({ \
+#define __get_user_asm(insn, addr) \
+{ \
__asm__ __volatile__( \
"1: " insn " %1, %3 \n" \
"2: \n" \
@@ -264,20 +256,20 @@
" "__UA_ADDR "\t1b, 3b \n" \
" .previous \n" \
: "=r" (__gu_err), "=r" (__gu_val) \
- : "0" (__gu_err), "o" (__m(__gu_addr)), "i" (-EFAULT)); \
-})
+ : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
+}
/*
* Get a long long 64 using 32 bit registers.
*/
-#define __get_user_asm_ll32(__gu_err) \
-({ \
+#define __get_user_asm_ll32(addr) \
+{ \
__asm__ __volatile__( \
- "1: lw %1, %3 \n" \
- "2: lw %D1, %4 \n" \
+ "1: lw %1, (%3) \n" \
+ "2: lw %D1, 4(%3) \n" \
" move %0, $0 \n" \
"3: .section .fixup,\"ax\" \n" \
- "4: li %0, %5 \n" \
+ "4: li %0, %4 \n" \
" move %1, $0 \n" \
" move %D1, $0 \n" \
" j 3b \n" \
@@ -287,9 +279,8 @@
" " __UA_ADDR " 2b, 4b \n" \
" .previous \n" \
: "=r" (__gu_err), "=&r" (__gu_val) \
- : "0" (__gu_err), "o" (__m(__gu_addr)), \
- "o" (__m(__gu_addr + 4)), "i" (-EFAULT)); \
-})
+ : "0" (0), "r" (addr), "i" (-EFAULT)); \
+}
extern void __get_user_unknown(void);
@@ -298,25 +289,22 @@
* for 32 bit mode and old iron.
*/
#ifdef __mips64
-#define __PUT_USER_DW(__pu_val) __put_user_asm("sd", __pu_val)
+#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
#else
-#define __PUT_USER_DW(__pu_val) __put_user_asm_ll32(__pu_val)
+#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
#endif
#define __put_user_nocheck(x,ptr,size) \
({ \
__typeof__(*(ptr)) __pu_val; \
- long __pu_addr; \
long __pu_err = 0; \
\
- might_sleep(); \
__pu_val = (x); \
- __pu_addr = (long) (ptr); \
switch (size) { \
- case 1: __put_user_asm("sb", __pu_val); break; \
- case 2: __put_user_asm("sh", __pu_val); break; \
- case 4: __put_user_asm("sw", __pu_val); break; \
- case 8: __PUT_USER_DW(__pu_val); break; \
+ case 1: __put_user_asm("sb", ptr); break; \
+ case 2: __put_user_asm("sh", ptr); break; \
+ case 4: __put_user_asm("sw", ptr); break; \
+ case 8: __PUT_USER_DW(ptr); break; \
default: __put_user_unknown(); break; \
} \
__pu_err; \
@@ -324,30 +312,24 @@
#define __put_user_check(x,ptr,size) \
({ \
- __typeof__(*(ptr)) __pu_val; \
- long __pu_addr; \
- long __pu_err; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ long __pu_err = -EFAULT; \
\
- might_sleep(); \
- __pu_val = (x); \
- __pu_addr = (long) (ptr); \
- __pu_err = access_ok(VERIFY_WRITE, (void *) __pu_addr, size) \
- ? 0 : -EFAULT; \
- \
- if (likely(!__pu_err)) { \
+ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
switch (size) { \
- case 1: __put_user_asm("sb", __pu_val); break; \
- case 2: __put_user_asm("sh", __pu_val); break; \
- case 4: __put_user_asm("sw", __pu_val); break; \
- case 8: __PUT_USER_DW(__pu_val); break; \
+ case 1: __put_user_asm("sb", __pu_addr); break; \
+ case 2: __put_user_asm("sh", __pu_addr); break; \
+ case 4: __put_user_asm("sw", __pu_addr); break; \
+ case 8: __PUT_USER_DW(__pu_addr); break; \
default: __put_user_unknown(); break; \
} \
} \
__pu_err; \
})
-#define __put_user_asm(insn, __pu_val) \
-({ \
+#define __put_user_asm(insn, ptr) \
+{ \
__asm__ __volatile__( \
"1: " insn " %z2, %3 # __put_user_asm\n" \
"2: \n" \
@@ -359,18 +341,18 @@
" " __UA_ADDR " 1b, 3b \n" \
" .previous \n" \
: "=r" (__pu_err) \
- : "0" (__pu_err), "Jr" (__pu_val), "o" (__m(__pu_addr)), \
+ : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \
"i" (-EFAULT)); \
-})
+}
-#define __put_user_asm_ll32(__pu_val) \
-({ \
+#define __put_user_asm_ll32(ptr) \
+{ \
__asm__ __volatile__( \
- "1: sw %2, %3 # __put_user_asm_ll32 \n" \
- "2: sw %D2, %4 \n" \
+ "1: sw %2, (%3) # __put_user_asm_ll32 \n" \
+ "2: sw %D2, 4(%3) \n" \
"3: \n" \
" .section .fixup,\"ax\" \n" \
- "4: li %0, %5 \n" \
+ "4: li %0, %4 \n" \
" j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
@@ -378,9 +360,9 @@
" " __UA_ADDR " 2b, 4b \n" \
" .previous" \
: "=r" (__pu_err) \
- : "0" (__pu_err), "r" (__pu_val), "o" (__m(__pu_addr)), \
- "o" (__m(__pu_addr + 4)), "i" (-EFAULT)); \
-})
+ : "0" (0), "r" (__pu_val), "r" (ptr), \
+ "i" (-EFAULT)); \
+}
extern void __put_user_unknown(void);
@@ -403,7 +385,7 @@
#define __invoke_copy_to_user(to,from,n) \
({ \
- register void *__cu_to_r __asm__ ("$4"); \
+ register void __user *__cu_to_r __asm__ ("$4"); \
register const void *__cu_from_r __asm__ ("$5"); \
register long __cu_len_r __asm__ ("$6"); \
\
@@ -435,7 +417,7 @@
*/
#define __copy_to_user(to,from,n) \
({ \
- void *__cu_to; \
+ void __user *__cu_to; \
const void *__cu_from; \
long __cu_len; \
\
@@ -465,7 +447,7 @@
*/
#define copy_to_user(to,from,n) \
({ \
- void *__cu_to; \
+ void __user *__cu_to; \
const void *__cu_from; \
long __cu_len; \
\
@@ -482,7 +464,7 @@
#define __invoke_copy_from_user(to,from,n) \
({ \
register void *__cu_to_r __asm__ ("$4"); \
- register const void *__cu_from_r __asm__ ("$5"); \
+ register const void __user *__cu_from_r __asm__ ("$5"); \
register long __cu_len_r __asm__ ("$6"); \
\
__cu_to_r = (to); \
@@ -521,7 +503,7 @@
#define __copy_from_user(to,from,n) \
({ \
void *__cu_to; \
- const void *__cu_from; \
+ const void __user *__cu_from; \
long __cu_len; \
\
might_sleep(); \
@@ -552,7 +534,7 @@
#define copy_from_user(to,from,n) \
({ \
void *__cu_to; \
- const void *__cu_from; \
+ const void __user *__cu_from; \
long __cu_len; \
\
might_sleep(); \
@@ -569,8 +551,8 @@
#define copy_in_user(to,from,n) \
({ \
- void *__cu_to; \
- const void *__cu_from; \
+ void __user *__cu_to; \
+ const void __user *__cu_from; \
long __cu_len; \
\
might_sleep(); \
@@ -596,7 +578,7 @@
* On success, this will be zero.
*/
static inline __kernel_size_t
-__clear_user(void *addr, __kernel_size_t size)
+__clear_user(void __user *addr, __kernel_size_t size)
{
__kernel_size_t res;
@@ -616,7 +598,7 @@
#define clear_user(addr,n) \
({ \
- void * __cl_addr = (addr); \
+ void __user * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && access_ok(VERIFY_WRITE, \
((unsigned long)(__cl_addr)), __cl_size)) \
@@ -645,7 +627,7 @@
* and returns @count.
*/
static inline long
-__strncpy_from_user(char *__to, const char *__from, long __len)
+__strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
@@ -682,7 +664,7 @@
* and returns @count.
*/
static inline long
-strncpy_from_user(char *__to, const char *__from, long __len)
+strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
@@ -701,7 +683,7 @@
}
/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-static inline long __strlen_user(const char *s)
+static inline long __strlen_user(const char __user *s)
{
long res;
@@ -731,7 +713,7 @@
* If there is a limit on the length of a valid string, you may wish to
* consider using strnlen_user() instead.
*/
-static inline long strlen_user(const char *s)
+static inline long strlen_user(const char __user *s)
{
long res;
@@ -748,7 +730,7 @@
}
/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-static inline long __strnlen_user(const char *s, long n)
+static inline long __strnlen_user(const char __user *s, long n)
{
long res;
@@ -779,7 +761,7 @@
* If there is a limit on the length of a valid string, you may wish to
* consider using strnlen_user() instead.
*/
-static inline long strnlen_user(const char *s, long n)
+static inline long strnlen_user(const char __user *s, long n)
{
long res;
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index ad4d480..c9eaf4c 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -303,16 +303,21 @@
#define __NR_add_key (__NR_Linux + 280)
#define __NR_request_key (__NR_Linux + 281)
#define __NR_keyctl (__NR_Linux + 282)
+#define __NR_set_thread_area (__NR_Linux + 283)
+#define __NR_inotify_init (__NR_Linux + 284)
+#define __NR_inotify_add_watch (__NR_Linux + 285)
+#define __NR_inotify_rm_watch (__NR_Linux + 286)
+
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 282
+#define __NR_Linux_syscalls 286
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 282
+#define __NR_O32_Linux_syscalls 283
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -562,16 +567,20 @@
#define __NR_add_key (__NR_Linux + 239)
#define __NR_request_key (__NR_Linux + 240)
#define __NR_keyctl (__NR_Linux + 241)
+#define __NR_set_thread_area (__NR_Linux + 242)
+#define __NR_inotify_init (__NR_Linux + 243)
+#define __NR_inotify_add_watch (__NR_Linux + 244)
+#define __NR_inotify_rm_watch (__NR_Linux + 245)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 241
+#define __NR_Linux_syscalls 245
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 241
+#define __NR_64_Linux_syscalls 242
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -825,16 +834,20 @@
#define __NR_add_key (__NR_Linux + 243)
#define __NR_request_key (__NR_Linux + 244)
#define __NR_keyctl (__NR_Linux + 245)
+#define __NR_set_thread_area (__NR_Linux + 246)
+#define __NR_inotify_init (__NR_Linux + 247)
+#define __NR_inotify_add_watch (__NR_Linux + 248)
+#define __NR_inotify_rm_watch (__NR_Linux + 249)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 245
+#define __NR_Linux_syscalls 249
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 245
+#define __NR_N32_Linux_syscalls 246
#ifndef __ASSEMBLY__
diff --git a/include/asm-mips/vga.h b/include/asm-mips/vga.h
index 6b35cf0..ca5cec9 100644
--- a/include/asm-mips/vga.h
+++ b/include/asm-mips/vga.h
@@ -6,6 +6,8 @@
#ifndef _ASM_VGA_H
#define _ASM_VGA_H
+#include <asm/byteorder.h>
+
/*
* On the PC, we can just recalculate addresses and then
* access the videoram directly without any black magic.
@@ -16,4 +18,27 @@
#define vga_readb(x) (*(x))
#define vga_writeb(x,y) (*(y) = (x))
+#define VT_BUF_HAVE_RW
+/*
+ * These are only needed for supporting VGA or MDA text mode, which use little
+ * endian byte ordering.
+ * In other cases, we can optimize by using native byte ordering and
+ * <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+ *addr = cpu_to_le16(val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+ return le16_to_cpu(*addr);
+}
+
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+
#endif /* _ASM_VGA_H */
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index 04ee53b..ad374bd 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -177,6 +177,17 @@
#endif
/*
+ * The RM9000 has a bug (though PMC-Sierra opposes it being called that)
+ * where invalid instructions in the same I-cache line worth of instructions
+ * being fetched may case spurious exceptions.
+ */
+#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_MOMENCO_OCELOT_3) || \
+ defined(CONFIG_PMC_YOSEMITE)
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#endif
+
+
+/*
* ON the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
* may cause ll / sc and lld / scd sequences to execute non-atomically.
*/
@@ -187,6 +198,9 @@
/*
* Workarounds default to off
*/
+#ifndef ICACHE_REFILLS_WORKAROUND_WAR
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#endif
#ifndef R4600_V1_INDEX_ICACHEOP_WAR
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#endif
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 4522c71..cc84934 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -104,6 +104,22 @@
addr [0] &= 0xfe; /* clear multicast bit */
addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
}
+
+/**
+ * compare_ether_addr - Compare two Ethernet addresses
+ * @addr1: Pointer to a six-byte array containing the Ethernet address
+ * @addr2 Pointer other six-byte array containing the Ethernet address
+ *
+ * Compare two ethernet addresses, returns 0 if equal
+ */
+static inline unsigned compare_ether_addr(const u8 *_a, const u8 *_b)
+{
+ const u16 *a = (const u16 *) _a;
+ const u16 *b = (const u16 *) _b;
+
+ BUILD_BUG_ON(ETH_ALEN != 6);
+ return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+}
#endif /* __KERNEL__ */
#endif /* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
new file mode 100644
index 0000000..bef23bb
--- /dev/null
+++ b/include/linux/fs_enet_pd.h
@@ -0,0 +1,136 @@
+/*
+ * Platform information definitions for the
+ * universal Freescale Ethernet driver.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_ENET_PD_H
+#define FS_ENET_PD_H
+
+#include <linux/version.h>
+#include <asm/types.h>
+
+#define FS_ENET_NAME "fs_enet"
+
+enum fs_id {
+ fsid_fec1,
+ fsid_fec2,
+ fsid_fcc1,
+ fsid_fcc2,
+ fsid_fcc3,
+ fsid_scc1,
+ fsid_scc2,
+ fsid_scc3,
+ fsid_scc4,
+};
+
+#define FS_MAX_INDEX 9
+
+static inline int fs_get_fec_index(enum fs_id id)
+{
+ if (id >= fsid_fec1 && id <= fsid_fec2)
+ return id - fsid_fec1;
+ return -1;
+}
+
+static inline int fs_get_fcc_index(enum fs_id id)
+{
+ if (id >= fsid_fcc1 && id <= fsid_fcc3)
+ return id - fsid_fcc1;
+ return -1;
+}
+
+static inline int fs_get_scc_index(enum fs_id id)
+{
+ if (id >= fsid_scc1 && id <= fsid_scc4)
+ return id - fsid_scc1;
+ return -1;
+}
+
+enum fs_mii_method {
+ fsmii_fixed,
+ fsmii_fec,
+ fsmii_bitbang,
+};
+
+enum fs_ioport {
+ fsiop_porta,
+ fsiop_portb,
+ fsiop_portc,
+ fsiop_portd,
+ fsiop_porte,
+};
+
+struct fs_mii_bus_info {
+ int method; /* mii method */
+ int id; /* the id of the mii_bus */
+ int disable_aneg; /* if the controller needs to negothiate speed & duplex */
+ int lpa; /* the default board-specific vallues will be applied otherwise */
+
+ union {
+ struct {
+ int duplex;
+ int speed;
+ } fixed;
+
+ struct {
+ /* nothing */
+ } fec;
+
+ struct {
+ /* nothing */
+ } scc;
+
+ struct {
+ int mdio_port; /* port & bit for MDIO */
+ int mdio_bit;
+ int mdc_port; /* port & bit for MDC */
+ int mdc_bit;
+ int delay; /* delay in us */
+ } bitbang;
+ } i;
+};
+
+struct fs_platform_info {
+
+ void(*init_ioports)(void);
+ /* device specific information */
+ int fs_no; /* controller index */
+
+ u32 cp_page; /* CPM page */
+ u32 cp_block; /* CPM sblock */
+
+ u32 clk_trx; /* some stuff for pins & mux configuration*/
+ u32 clk_route;
+ u32 clk_mask;
+
+ u32 mem_offset;
+ u32 dpram_offset;
+ u32 fcc_regs_c;
+
+ u32 device_flags;
+
+ int phy_addr; /* the phy address (-1 no phy) */
+ int phy_irq; /* the phy irq (if it exists) */
+
+ const struct fs_mii_bus_info *bus_info;
+
+ int rx_ring, tx_ring; /* number of buffers on rx */
+ __u8 macaddr[6]; /* mac address */
+ int rx_copybreak; /* limit we copy small frames */
+ int use_napi; /* use NAPI */
+ int napi_weight; /* NAPI weight */
+
+ int use_rmii; /* use RMII mode */
+};
+
+#endif
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a6dbb51..3461abc 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -218,7 +218,7 @@
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_forced
+ ide_au1xxx, ide_forced
} hwif_chipset_t;
/*
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 467a096..5619200 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1788,11 +1788,13 @@
#define PCI_DEVICE_ID_TIGON3_5721 0x1659
#define PCI_DEVICE_ID_TIGON3_5705M 0x165d
#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e
+#define PCI_DEVICE_ID_TIGON3_5714 0x1668
#define PCI_DEVICE_ID_TIGON3_5780 0x166a
#define PCI_DEVICE_ID_TIGON3_5780S 0x166b
#define PCI_DEVICE_ID_TIGON3_5705F 0x166e
#define PCI_DEVICE_ID_TIGON3_5750 0x1676
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
+#define PCI_DEVICE_ID_TIGON3_5715 0x1678
#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
#define PCI_DEVICE_ID_TIGON3_5751M 0x167d
#define PCI_DEVICE_ID_TIGON3_5751F 0x167e
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 27db8da..2b0401b 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -39,7 +39,8 @@
#define PORT_RSA 13
#define PORT_NS16550A 14
#define PORT_XSCALE 15
-#define PORT_MAX_8250 15 /* max port ID */
+#define PORT_IP3106 16
+#define PORT_MAX_8250 16 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
diff --git a/include/linux/serial_ip3106.h b/include/linux/serial_ip3106.h
new file mode 100644
index 0000000..f500ac6
--- /dev/null
+++ b/include/linux/serial_ip3106.h
@@ -0,0 +1,81 @@
+/*
+ * Embedded Alley Solutions, source@embeddedalley.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_SERIAL_IP3106_H
+#define _LINUX_SERIAL_IP3106_H
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+#define IP3106_NR_PORTS 2
+
+struct ip3106_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+};
+
+/* register offsets */
+#define IP3106_LCR 0
+#define IP3106_MCR 0x004
+#define IP3106_BAUD 0x008
+#define IP3106_CFG 0x00c
+#define IP3106_FIFO 0x028
+#define IP3106_ISTAT 0xfe0
+#define IP3106_IEN 0xfe4
+#define IP3106_ICLR 0xfe8
+#define IP3106_ISET 0xfec
+#define IP3106_PD 0xff4
+#define IP3106_MID 0xffc
+
+#define IP3106_UART_LCR_TXBREAK (1<<30)
+#define IP3106_UART_LCR_PAREVN 0x10000000
+#define IP3106_UART_LCR_PAREN 0x08000000
+#define IP3106_UART_LCR_2STOPB 0x04000000
+#define IP3106_UART_LCR_8BIT 0x01000000
+#define IP3106_UART_LCR_TX_RST 0x00040000
+#define IP3106_UART_LCR_RX_RST 0x00020000
+#define IP3106_UART_LCR_RX_NEXT 0x00010000
+
+#define IP3106_UART_MCR_SCR 0xFF000000
+#define IP3106_UART_MCR_DCD 0x00800000
+#define IP3106_UART_MCR_CTS 0x00100000
+#define IP3106_UART_MCR_LOOP 0x00000010
+#define IP3106_UART_MCR_RTS 0x00000002
+#define IP3106_UART_MCR_DTR 0x00000001
+
+#define IP3106_UART_INT_TX 0x00000080
+#define IP3106_UART_INT_EMPTY 0x00000040
+#define IP3106_UART_INT_RCVTO 0x00000020
+#define IP3106_UART_INT_RX 0x00000010
+#define IP3106_UART_INT_RXOVRN 0x00000008
+#define IP3106_UART_INT_FRERR 0x00000004
+#define IP3106_UART_INT_BREAK 0x00000002
+#define IP3106_UART_INT_PARITY 0x00000001
+#define IP3106_UART_INT_ALLRX 0x0000003F
+#define IP3106_UART_INT_ALLTX 0x000000C0
+
+#define IP3106_UART_FIFO_TXFIFO 0x001F0000
+#define IP3106_UART_FIFO_TXFIFO_STA (0x1f<<16)
+#define IP3106_UART_FIFO_RXBRK 0x00008000
+#define IP3106_UART_FIFO_RXFE 0x00004000
+#define IP3106_UART_FIFO_RXPAR 0x00002000
+#define IP3106_UART_FIFO_RXFIFO 0x00001F00
+#define IP3106_UART_FIFO_RBRTHR 0x000000FF
+
+#endif
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 30bb4a8..2250a18 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -237,8 +237,7 @@
static __inline__ void ax25_cb_put(ax25_cb *ax25)
{
if (atomic_dec_and_test(&ax25->refcount)) {
- if (ax25->digipeat)
- kfree(ax25->digipeat);
+ kfree(ax25->digipeat);
kfree(ax25);
}
}
diff --git a/include/net/netrom.h b/include/net/netrom.h
index a6bf6e0..a5ee53b 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -136,8 +136,7 @@
static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
{
if (atomic_dec_and_test(&nr_neigh->refcount)) {
- if (nr_neigh->digipeat != NULL)
- kfree(nr_neigh->digipeat);
+ kfree(nr_neigh->digipeat);
kfree(nr_neigh);
}
}
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index b361172..6cb1e27 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -116,6 +116,9 @@
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
+/* Values for T10/04-262r7 */
+#define ATA_16 0x85 /* 16-byte pass-thru */
+#define ATA_12 0xa1 /* 12-byte pass-thru */
/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
diff --git a/kernel/signal.c b/kernel/signal.c
index f2b96b0..6904bbb 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -406,6 +406,8 @@
void exit_signal(struct task_struct *tsk)
{
+ atomic_dec(&tsk->signal->live);
+
write_lock_irq(&tasklist_lock);
__exit_signal(tsk);
write_unlock_irq(&tasklist_lock);
diff --git a/kernel/time.c b/kernel/time.c
index 40c2410..a3c2100 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -532,6 +532,7 @@
clock_was_set();
return 0;
}
+EXPORT_SYMBOL(do_settimeofday);
void do_gettimeofday (struct timeval *tv)
{
diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 4e958f7..edfea77 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && BT_L2CAP
+ depends on BT && BT_L2CAP && (BROKEN || !S390)
select INPUT
help
HIDP (Human Interface Device Protocol) is a transport layer
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 68a5ca8..e245773 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -146,19 +146,6 @@
return 0;
}
-static inline unsigned int compare_eth_addr(const unsigned char *__a, const unsigned char *__b)
-{
- const unsigned short *dest = (unsigned short *) __a;
- const unsigned short *devaddr = (unsigned short *) __b;
- unsigned int res;
-
- BUILD_BUG_ON(ETH_ALEN != 6);
- res = ((dest[0] ^ devaddr[0]) |
- (dest[1] ^ devaddr[1]) |
- (dest[2] ^ devaddr[2])) != 0;
-
- return res;
-}
/*
* Determine the packet's protocol ID. The rule here is that we
@@ -176,7 +163,7 @@
eth = eth_hdr(skb);
if (*eth->h_dest&1) {
- if (!compare_eth_addr(eth->h_dest, dev->broadcast))
+ if (!compare_ether_addr(eth->h_dest, dev->broadcast))
skb->pkt_type = PACKET_BROADCAST;
else
skb->pkt_type = PACKET_MULTICAST;
@@ -191,7 +178,7 @@
*/
else if(1 /*dev->flags&IFF_PROMISC*/) {
- if (unlikely(compare_eth_addr(eth->h_dest, dev->dev_addr)))
+ if (unlikely(compare_ether_addr(eth->h_dest, dev->dev_addr)))
skb->pkt_type = PACKET_OTHERHOST;
}
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index e61bc71..990633c 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -591,7 +591,7 @@
break;
case NETDEV_DOWN:
fib_del_ifaddr(ifa);
- if (ifa->ifa_dev && ifa->ifa_dev->ifa_list == NULL) {
+ if (ifa->ifa_dev->ifa_list == NULL) {
/* Last address was deleted from this interface.
Disable IP.
*/
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index a78e48d..6b46a8a 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -35,7 +35,6 @@
#undef DEBUG
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/ioport.h>
