sh: mach-se evt2irq migration.
Migrate Solution Engine boards to evt2irq backed hwirq lookups.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
index 14be91c..8a6d44b 100644
--- a/arch/sh/include/mach-se/mach/se.h
+++ b/arch/sh/include/mach-se/mach/se.h
@@ -8,6 +8,7 @@
*
* Hitachi SolutionEngine support
*/
+#include <linux/sh_intc.h>
/* Box specific addresses. */
@@ -82,16 +83,16 @@
#define INTC_IPRD 0xa4000018UL
#define INTC_IPRE 0xa400001aUL
-#define IRQ0_IRQ 32
-#define IRQ1_IRQ 33
+#define IRQ0_IRQ evt2irq(0x600)
+#define IRQ1_IRQ evt2irq(0x620)
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC 12
-#define IRQ_CFCARD 14
+#define IRQ_STNIC evt2irq(0x380)
+#define IRQ_CFCARD evt2irq(0x3c0)
#else
-#define IRQ_STNIC 10
-#define IRQ_CFCARD 7
+#define IRQ_STNIC evt2irq(0x340)
+#define IRQ_CFCARD evt2irq(0x2e0)
#endif
/* SH Ether support (SH7710/SH7712) */
@@ -105,9 +106,9 @@
# define PHY_ID 0x01
#endif
/* Ether IRQ */
-#define SH_ETH0_IRQ 80
-#define SH_ETH1_IRQ 81
-#define SH_TSU_IRQ 82
+#define SH_ETH0_IRQ evt2irq(0xc00)
+#define SH_ETH1_IRQ evt2irq(0xc20)
+#define SH_TSU_IRQ evt2irq(0xc40)
void init_se_IRQ(void);
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
index 8d8170d..50b5d57 100644
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -8,6 +8,7 @@
*
* SH-Mobile SolutionEngine 7343 support
*/
+#include <linux/sh_intc.h>
/* Box specific addresses. */
@@ -118,10 +119,10 @@
#define FPGA_IN 0xb1400000
#define FPGA_OUT 0xb1400002
-#define IRQ0_IRQ 32
-#define IRQ1_IRQ 33
-#define IRQ4_IRQ 36
-#define IRQ5_IRQ 37
+#define IRQ0_IRQ evt2irq(0x600)
+#define IRQ1_IRQ evt2irq(0x620)
+#define IRQ4_IRQ evt2irq(0x680)
+#define IRQ5_IRQ evt2irq(0x6a0)
#define SE7343_FPGA_IRQ_MRSHPC0 0
#define SE7343_FPGA_IRQ_MRSHPC1 1
diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
index b957f60..eabd053 100644
--- a/arch/sh/include/mach-se/mach/se7721.h
+++ b/arch/sh/include/mach-se/mach/se7721.h
@@ -11,6 +11,8 @@
#ifndef __ASM_SH_SE7721_H
#define __ASM_SH_SE7721_H
+
+#include <linux/sh_intc.h>
#include <asm/addrspace.h>
/* Box specific addresses. */
@@ -49,9 +51,9 @@
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define PA_LED 0xB6800000 /* 8bit LED */
-#define PA_FPGA 0xB7000000 /* FPGA base address */
+#define PA_FPGA 0xB7000000 /* FPGA base address */
-#define MRSHPC_IRQ0 10
+#define MRSHPC_IRQ0 evt2irq(0x340)
#define FPGA_ILSR1 (PA_FPGA + 0x02)
#define FPGA_ILSR2 (PA_FPGA + 0x03)
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index 16505bf..201081e 100644
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -13,6 +13,7 @@
* for more details.
*
*/
+#include <linux/sh_intc.h>
#include <asm/addrspace.h>
/* Box specific addresses. */
@@ -31,7 +32,7 @@
#define PA_PERIPHERAL 0xB0000000
-#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
+#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */
@@ -51,7 +52,7 @@
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */
-#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
+#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */
/* GPIO */
@@ -77,8 +78,8 @@
#define PORT_HIZCRC 0xA405015CUL
/* IRQ */
-#define IRQ0_IRQ 32
-#define IRQ1_IRQ 33
+#define IRQ0_IRQ evt2irq(0x600)
+#define IRQ1_IRQ evt2irq(0x620)
#define IRQ01_MODE 0xb1800000
#define IRQ01_STS 0xb1800004
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 29514a3..be842dd 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -18,6 +18,7 @@
* for more details.
*
*/
+#include <linux/sh_intc.h>
#include <asm/addrspace.h>
/* SH Eth */
@@ -35,9 +36,9 @@
#define IRQ2_MR (0xba200028)
/* IRQ */
-#define IRQ0_IRQ 32
-#define IRQ1_IRQ 33
-#define IRQ2_IRQ 34
+#define IRQ0_IRQ evt2irq(0x600)
+#define IRQ1_IRQ evt2irq(0x620)
+#define IRQ2_IRQ evt2irq(0x640)
/* Bits in IRQ012 registers */
#define SE7724_FPGA_IRQ_BASE 220
diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
index b36792a..2718717 100644
--- a/arch/sh/include/mach-se/mach/se7751.h
+++ b/arch/sh/include/mach-se/mach/se7751.h
@@ -11,6 +11,7 @@
* Modified for 7751 Solution Engine by
* Ian da Silva and Jeremy Siegel, 2001.
*/
+#include <linux/sh_intc.h>
/* Box specific addresses. */
@@ -63,7 +64,7 @@
#define BCR_ILCRF (PA_BCR + 10)
#define BCR_ILCRG (PA_BCR + 12)
-#define IRQ_79C973 13
+#define IRQ_79C973 evt2irq(0x3a0)
void init_7751se_IRQ(void);
diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
index 40e9b41..bde357c 100644
--- a/arch/sh/include/mach-se/mach/se7780.h
+++ b/arch/sh/include/mach-se/mach/se7780.h
@@ -12,6 +12,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/sh_intc.h>
#include <asm/addrspace.h>
/* Box specific addresses. */
@@ -80,13 +81,13 @@
#define IRQPOS_PCCPW (0 * 4)
/* IDE interrupt */
-#define IRQ_IDE0 67 /* iVDR */
+#define IRQ_IDE0 evt2irq(0xa60) /* iVDR */
/* SMC interrupt */
-#define SMC_IRQ 8
+#define SMC_IRQ evt2irq(0x300)
/* SM501 interrupt */
-#define SM501_IRQ 0
+#define SM501_IRQ evt2irq(0x200)
/* interrupt pin */
#define IRQPIN_EXTINT1 0 /* IRQ0 pin */
