/*
 *	linux/arch/alpha/kernel/sys_mikasa.c
 *
 *	Copyright (C) 1995 David A Rusling
 *	Copyright (C) 1996 Jay A Estabrook
 *	Copyright (C) 1998, 1999 Richard Henderson
 *
 * Code supporting the MIKASA (AlphaServer 1000).
 */

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>

#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>

#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"


/* Note mask bit is true for ENABLED irqs.  */
static int cached_irq_mask;

static inline void
mikasa_update_irq_hw(int mask)
{
	outw(mask, 0x536);
}

static inline void
mikasa_enable_irq(unsigned int irq)
{
	mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16));
}

static void
mikasa_disable_irq(unsigned int irq)
{
	mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
}

static unsigned int
mikasa_startup_irq(unsigned int irq)
{
	mikasa_enable_irq(irq);
	return 0;
}

static void
mikasa_end_irq(unsigned int irq)
{
	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
		mikasa_enable_irq(irq);
}

static struct hw_interrupt_type mikasa_irq_type = {
	.typename	= "MIKASA",
	.startup	= mikasa_startup_irq,
	.shutdown	= mikasa_disable_irq,
	.enable		= mikasa_enable_irq,
	.disable	= mikasa_disable_irq,
	.ack		= mikasa_disable_irq,
	.end		= mikasa_end_irq,
};

static void 
mikasa_device_interrupt(unsigned long vector, struct pt_regs *regs)
{
	unsigned long pld;
	unsigned int i;

	/* Read the interrupt summary registers */
	pld = (((~inw(0x534) & 0x0000ffffUL) << 16)
	       | (((unsigned long) inb(0xa0)) << 8)
	       | inb(0x20));

	/*
	 * Now for every possible bit set, work through them and call
	 * the appropriate interrupt handler.
	 */
	while (pld) {
		i = ffz(~pld);
		pld &= pld - 1; /* clear least bit set */
		if (i < 16) {
			isa_device_interrupt(vector, regs);
		} else {
			handle_irq(i, regs);
		}
	}
}

static void __init
mikasa_init_irq(void)
{
	long i;

	if (alpha_using_srm)
		alpha_mv.device_interrupt = srm_device_interrupt;

	mikasa_update_irq_hw(0);

	for (i = 16; i < 32; ++i) {
		irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
		irq_desc[i].chip = &mikasa_irq_type;
	}

	init_i8259a_irqs();
	common_init_isa_dma();
}


/*
 * PCI Fixup configuration.
 *
 * Summary @ 0x536:
 * Bit      Meaning
 * 0        Interrupt Line A from slot 0
 * 1        Interrupt Line B from slot 0
 * 2        Interrupt Line C from slot 0
 * 3        Interrupt Line D from slot 0
 * 4        Interrupt Line A from slot 1
 * 5        Interrupt line B from slot 1
 * 6        Interrupt Line C from slot 1
 * 7        Interrupt Line D from slot 1
 * 8        Interrupt Line A from slot 2
 * 9        Interrupt Line B from slot 2
 *10        Interrupt Line C from slot 2
 *11        Interrupt Line D from slot 2
 *12        NCR 810 SCSI
 *13        Power Supply Fail
 *14        Temperature Warn
 *15        Reserved
 *
 * The device to slot mapping looks like:
 *
 * Slot     Device
 *  6       NCR SCSI controller
 *  7       Intel PCI-EISA bridge chip
 * 11       PCI on board slot 0
 * 12       PCI on board slot 1
 * 13       PCI on board slot 2
 *   
 *
 * This two layered interrupt approach means that we allocate IRQ 16 and 
 * above for PCI interrupts.  The IRQ relates to which bit the interrupt
 * comes in on.  This makes interrupt processing much easier.
 */

static int __init
mikasa_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
	static char irq_tab[8][5] __initdata = {
		/*INT    INTA   INTB   INTC   INTD */
		{16+12, 16+12, 16+12, 16+12, 16+12},	/* IdSel 17,  SCSI */
		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 18,  PCEB */
		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 19,  ???? */
		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 20,  ???? */
		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 21,  ???? */
		{ 16+0,  16+0,  16+1,  16+2,  16+3},	/* IdSel 22,  slot 0 */
		{ 16+4,  16+4,  16+5,  16+6,  16+7},	/* IdSel 23,  slot 1 */
		{ 16+8,  16+8,  16+9, 16+10, 16+11},	/* IdSel 24,  slot 2 */
	};
	const long min_idsel = 6, max_idsel = 13, irqs_per_slot = 5;
	return COMMON_TABLE_LOOKUP;
}


#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
static void
mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr,
		           struct pt_regs * regs)
{
#define MCHK_NO_DEVSEL 0x205U
#define MCHK_NO_TABT 0x204U

	struct el_common *mchk_header;
	unsigned int code;

	mchk_header = (struct el_common *)la_ptr;

	/* Clear the error before any reporting.  */
	mb();
	mb(); /* magic */
	draina();
	apecs_pci_clr_err();
	wrmces(0x7);
	mb();

	code = mchk_header->code;
	process_mcheck_info(vector, la_ptr, regs, "MIKASA APECS",
			    (mcheck_expected(0)
			     && (code == MCHK_NO_DEVSEL
			         || code == MCHK_NO_TABT)));
}
#endif


/*
 * The System Vector
 */

#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector mikasa_mv __initmv = {
	.vector_name		= "Mikasa",
	DO_EV4_MMU,
	DO_DEFAULT_RTC,
	DO_APECS_IO,
	.machine_check		= mikasa_apecs_machine_check,
	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
	.min_io_address		= DEFAULT_IO_BASE,
	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,

	.nr_irqs		= 32,
	.device_interrupt	= mikasa_device_interrupt,

	.init_arch		= apecs_init_arch,
	.init_irq		= mikasa_init_irq,
	.init_rtc		= common_init_rtc,
	.init_pci		= common_init_pci,
	.pci_map_irq		= mikasa_map_irq,
	.pci_swizzle		= common_swizzle,
};
ALIAS_MV(mikasa)
#endif

#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector mikasa_primo_mv __initmv = {
	.vector_name		= "Mikasa-Primo",
	DO_EV5_MMU,
	DO_DEFAULT_RTC,
	DO_CIA_IO,
	.machine_check		= cia_machine_check,
	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
	.min_io_address		= DEFAULT_IO_BASE,
	.min_mem_address	= CIA_DEFAULT_MEM_BASE,

	.nr_irqs		= 32,
	.device_interrupt	= mikasa_device_interrupt,

	.init_arch		= cia_init_arch,
	.init_irq		= mikasa_init_irq,
	.init_rtc		= common_init_rtc,
	.init_pci		= cia_init_pci,
	.kill_arch		= cia_kill_arch,
	.pci_map_irq		= mikasa_map_irq,
	.pci_swizzle		= common_swizzle,
};
ALIAS_MV(mikasa_primo)
#endif