Merge commit 'v2.6.28-rc7' into tracing/core
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index b8e8646..b462bb1 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -316,12 +316,10 @@
pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
int nents, int direction)
-Maps a scatter gather list from the block layer.
-
Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
Please note that the sg cannot be mapped again if it has been mapped once.
The mapping process is allowed to destroy information in the sg.
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 6c442d8..4f3f384 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -23,6 +23,7 @@
1.3 sparc64
1.4 ppc
1.5 SuperH
+1.6 Blackfin
2. "Policy" / "Governor"?
2.1 Policy
@@ -97,6 +98,17 @@
SH-3
SH-4
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
2. "Policy" / "Governor" ?
==========================
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 4340cc8..67310fb 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -28,10 +28,7 @@
Caveats
=======
Features which OCFS2 does not support yet:
- - extended attributes
- quotas
- - cluster aware flock
- - cluster aware lockf
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
- POSIX ACLs
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index bcceb99..bb1b0dd 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -44,6 +44,7 @@
2.14 /proc/<pid>/io - Display the IO accounting fields
2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
2.16 /proc/<pid>/mountinfo - Information about mounts
+ 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
------------------------------------------------------------------------------
Preface
@@ -2483,4 +2484,30 @@
Documentation/filesystems/sharedsubtree.txt
+2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for max_user_watches is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
------------------------------------------------------------------------------
+
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index 62fe9b1..a8273d5 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -130,12 +130,12 @@
archive and links it into the resulting kernel binary. By default, this
archive is empty (consuming 134 bytes on x86).
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary. This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary. This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
diff --git a/Documentation/input/input-programming.txt b/Documentation/input/input-programming.txt
index 81905e8..7f8b9d9 100644
--- a/Documentation/input/input-programming.txt
+++ b/Documentation/input/input-programming.txt
@@ -20,10 +20,11 @@
static struct input_dev *button_dev;
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
+ return IRQ_HANDLED;
}
static int __init button_init(void)
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index e0e54a2..3cd2ad9 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1072,10 +1072,13 @@
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
STAC92HD73*
ref Reference board
- dell-m6 Dell desktops
+ dell-m6-amic Dell desktops/laptops with analog mics
+ dell-m6-dmic Dell desktops/laptops with digital mics
+ dell-m6 Dell desktops/laptops with both type of mics
STAC9872
vaio Setup for VAIO FE550G/SZ110
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 8bae2f0..0f5122e 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -215,7 +215,7 @@
/* if your mach-* infrastructure doesn't support kernels that can
* run on multiple boards, pdata wouldn't benefit from "__init".
*/
- static struct mysoc_spi_data __init pdata = { ... };
+ static struct mysoc_spi_data __initdata pdata = { ... };
static __init board_init(void)
{
diff --git a/Makefile b/Makefile
index 7b1f238..9a49960 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc7
+NAME = Erotic Pickled Herring
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
diff --git a/arch/Kconfig b/arch/Kconfig
index 8977d99..471e72d 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -79,8 +79,6 @@
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
-# arch_ptrace() and not #define __ARCH_SYS_PTRACE
-# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 5cf45fc..ff8cb63 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -338,7 +338,7 @@
return PCI_SLOT(dev->devfn);
}
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index e657c45..cf7da10 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -121,7 +121,7 @@
/*
* Where secondaries begin a life of C.
*/
-void __init
+void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@
* Send a message to a secondary's console. "START" is one such
* interesting message. ;-)
*/
-static void __init
+static void __cpuinit
send_secondary_console_msg(char *str, int cpuid)
{
struct percpu_struct *cpu;
@@ -289,7 +289,7 @@
/*
* Convince the console to have a secondary cpu begin execution.
*/
-static int __init
+static int __cpuinit
secondary_cpu_start(int cpuid, struct task_struct *idle)
{
struct percpu_struct *cpu;
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index c778779..cefc5a3 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -31,7 +31,7 @@
static int opDEC_fix;
-static void __init
+static void __cpuinit
opDEC_check(void)
{
__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@
return;
}
-void __init
+void __cpuinit
trap_init(void)
{
/* Tell PAL-code what global pointer we want in the kernel. */
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index f3af0b5..9876543 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@
# CONFIG_MACH_AKITA is not set
# CONFIG_MACH_SPITZ is not set
# CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 0842c53..782903f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -565,7 +565,7 @@
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
/* Devices prepare suspend */
- is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
index a647693..324d25a 100644
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@
1:
mov r0, #0xa0000000 @ Don't suppose memory access works
orr r0, r0, #0x00200000 @ even if it's supposed to
+ orr r0, r0, #0x0000b000
mov r1, #0
str r1, [r0] @ Early disable resume for next boot
ldr r0, mioa701_jumpaddr @ (Murphy's Law)
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4447711..a9d94f5 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -56,6 +56,9 @@
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@
GPIO31_AC97_SYNC,
/* IrDA */
+ GPIO40_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
@@ -71,7 +75,8 @@
GPIO16_PWM0_OUT,
/* USB */
- GPIO13_GPIO,
+ GPIO13_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
@@ -84,6 +89,45 @@
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO94_GPIO, /* wifi power 1 */
+ GPIO108_GPIO, /* wifi power 2 */
+ GPIO116_GPIO, /* wifi ready */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MISC. */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
};
/******************************************************************************
@@ -95,32 +139,49 @@
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
- err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+ palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
- return err;
+ goto err2;
}
err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
if (err)
- goto pwr_err;
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+ if (err)
+ goto err4;
err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
if (err)
- goto ro_err;
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+ if (err)
+ goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
-ro_err:
+err5:
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
return err;
}
@@ -128,7 +189,8 @@
{
gpio_free(GPIO_NR_PALMTX_SD_READONLY);
gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
}
static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
-
};
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@
ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
if (ret)
goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+ if (ret)
+ goto err2;
ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+ if (ret)
+ goto err3;
return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMTX_BL_POWER);
err:
@@ -254,6 +323,24 @@
/******************************************************************************
* IrDA
******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@
}
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .startup = palmtx_irda_startup,
+ .shutdown = palmtx_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmtx_irda_transceiver_mode,
};
@@ -268,17 +357,11 @@
/******************************************************************************
* UDC
******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
- gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
- udelay(50);
- gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .udc_command = palmtx_udc_command,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup_inverted = 0,
};
/******************************************************************************
@@ -290,17 +373,16 @@
ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
- goto err_cs_ac;
-
- ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
if (ret)
- goto err_cs_usb;
+ goto err2;
return 0;
-err_cs_usb:
+err2:
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
return ret;
}
@@ -309,14 +391,8 @@
return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
}
-static int palmtx_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
}
@@ -327,7 +403,6 @@
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmtx_is_ac_online,
- .is_usb_online = palmtx_is_usb_online,
.exit = power_supply_exit,
.supplied_to = palmtx_supplicants,
.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ }
+}
+
+
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
+ palmtx_udc_init();
pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index f601425..b36cec5c 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -385,6 +385,7 @@
.gpio = NR_BUILTIN_GPIO + 1,
}, {
.bus_id = 0, /* Must match with the camera ID above */
+ .gpio = -ENXIO,
}
};
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 3fe8be9..980a099 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -18,6 +18,7 @@
unsigned long pin_mosi;
unsigned long pin_miso;
+ int num_chipselect;
int bus_num;
void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8679fbc..424049d 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -101,6 +101,7 @@
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
#define OMAP24XX_GPIO_DATAIN 0x0038
@@ -1551,7 +1552,7 @@
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+ wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
@@ -1574,7 +1575,7 @@
{
int i;
- if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+ if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
return 0;
for (i = 0; i < gpio_bank_count; i++) {
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 768eb6e..2a9c27a 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -128,7 +128,7 @@
* clk_allow_idle - Counters previous clk_deny_idle
* @clk: clock signal handle
*/
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 49b2cf2..baadc97 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -35,6 +35,15 @@
int error = -EBADF;
struct file * file = NULL;
+ /* As with sparc32, make sure the shift for mmap2 is constant
+ (12), no matter what PAGE_SIZE we have.... */
+
+ /* But unlike sparc32, don't just silently break if we're
+ trying to map something we can't */
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+ return -EINVAL;
+ pgoff >>= PAGE_SHIFT - 12;
+
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
if (!(flags & MAP_ANONYMOUS)) {
file = fget(fd);
@@ -42,16 +51,6 @@
goto out;
}
- /* As with sparc32, make sure the shift for mmap2 is constant
- (12), no matter what PAGE_SIZE we have.... */
-
- /* But unlike sparc32, don't just silently break if we're
- trying to map something we can't */
- if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
- return -EINVAL;
-
- pgoff >>= (PAGE_SHIFT - 12);
-
down_write(¤t->mm->mmap_sem);
error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
up_write(¤t->mm->mmap_sem);
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 6417c1e..14055c6 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -325,8 +325,6 @@
#define arch_has_block_step() (1)
extern void user_enable_block_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index c3aa851..4e1801b 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -292,7 +292,7 @@
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
*/
-static void
+static void __init
sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
s64 status = 0;
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 4018077..9091606 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -23,7 +23,7 @@
/*
* References to members of the boot_cpu_data structure.
*/
- .text
+.section .text.head, "ax"
.global start_kernel
.global __bss_start
.global _end
@@ -133,7 +133,6 @@
/*
* AP startup routine
*/
- .text
.global eit_vector
ENTRY(startup_AP)
;; setup EVB
@@ -230,6 +229,7 @@
nop
#endif /* CONFIG_SMP */
+ .text
ENTRY(stack_start)
.long init_thread_union+8192
.long __KERNEL_DS
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 15a6f36..9db05df 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -27,6 +27,7 @@
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
index 7eb63de..08ea468 100644
--- a/arch/mips/include/asm/bug.h
+++ b/arch/mips/include/asm/bug.h
@@ -7,20 +7,31 @@
#include <asm/break.h>
-#define BUG() \
-do { \
- __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
-} while (0)
+static inline void __noreturn BUG(void)
+{
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+ /* Fool GCC into thinking the function doesn't return. */
+ while (1)
+ ;
+}
#define HAVE_ARCH_BUG
#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
-#define BUG_ON(condition) \
-do { \
- __asm__ __volatile__("tne $0, %0, %1" \
- : : "r" (condition), "i" (BRK_BUG)); \
-} while (0)
+static inline void __BUG_ON(unsigned long condition)
+{
+ if (__builtin_constant_p(condition)) {
+ if (condition)
+ BUG();
+ else
+ return;
+ }
+ __asm__ __volatile__("tne $0, %0, %1"
+ : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
#define HAVE_ARCH_BUG_ON
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 813abd1..c2c8bac 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -9,10 +9,6 @@
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 54be6af..0ea7482 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -522,17 +522,7 @@
} else {
switch (cur) {
/* Bxx (d8,PC) */
- case 0xc0:
- case 0xc1:
- case 0xc2:
- case 0xc3:
- case 0xc4:
- case 0xc5:
- case 0xc6:
- case 0xc7:
- case 0xc8:
- case 0xc9:
- case 0xca:
+ case 0xc0 ... 0xca:
if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
goto fault;
if (!__gdbstub_mark_bp(pc + 2, 0))
@@ -543,17 +533,7 @@
break;
/* LXX (d8,PC) */
- case 0xd0:
- case 0xd1:
- case 0xd2:
- case 0xd3:
- case 0xd4:
- case 0xd5:
- case 0xd6:
- case 0xd7:
- case 0xd8:
- case 0xd9:
- case 0xda:
+ case 0xd0 ... 0xda:
if (!__gdbstub_mark_bp(pc + 1, 0))
goto fault;
if (regs->pc != regs->lar &&
diff --git a/arch/parisc/include/asm/parisc-device.h b/arch/parisc/include/asm/parisc-device.h
index 7aa13f2..9afdad6 100644
--- a/arch/parisc/include/asm/parisc-device.h
+++ b/arch/parisc/include/asm/parisc-device.h
@@ -42,9 +42,9 @@
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
{
- return d->dev.bus_id;
+ return dev_name(&d->dev);
}
static inline void
diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h
index bb725a6..00da29a 100644
--- a/arch/parisc/include/asm/posix_types.h
+++ b/arch/parisc/include/asm/posix_types.h
@@ -24,13 +24,12 @@
typedef unsigned long __kernel_size_t;
typedef long __kernel_ssize_t;
typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#endif
+typedef long __kernel_time_t;
typedef char * __kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index afa5333..302f68d 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -47,8 +47,6 @@
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
struct task_struct;
#define arch_has_single_step() 1
void user_disable_single_step(struct task_struct *task);
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 2ca654b..884b7ce 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -43,7 +43,7 @@
EXPORT_SYMBOL(hppa_dma_ops);
static struct device root = {
- .bus_id = "parisc",
+ .init_name = "parisc",
};
static inline int check_dev(struct device *dev)
@@ -393,7 +393,8 @@
static void setup_bus_id(struct parisc_device *padev)
{
struct hardware_path path;
- char *output = padev->dev.bus_id;
+ char name[20];
+ char *output = name;
int i;
get_node_path(padev->dev.parent, &path);
@@ -404,6 +405,7 @@
output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
}
sprintf(output, "%u", (unsigned char) padev->hw_path);
+ dev_set_name(&padev->dev, name);
}
struct parisc_device * create_tree_node(char id, struct device *parent)
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 675f1d0..4c771cd 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/console.h>
-#include <linux/kallsyms.h>
#include <linux/bug.h>
#include <asm/assembly.h>
@@ -51,7 +50,7 @@
DEFINE_SPINLOCK(pa_dbit_lock);
#endif
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs);
static int printbinary(char *buf, unsigned long x, int nbits)
@@ -121,18 +120,19 @@
void show_regs(struct pt_regs *regs)
{
- int i;
+ int i, user;
char *level;
unsigned long cr30, cr31;
- level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+ user = user_mode(regs);
+ level = user ? KERN_DEBUG : KERN_CRIT;
print_gr(level, regs);
for (i = 0; i < 8; i += 4)
PRINTREGS(level, regs->sr, "sr", RFMT, i);
- if (user_mode(regs))
+ if (user)
print_fr(level, regs);
cr30 = mfctl(30);
@@ -145,14 +145,18 @@
printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n",
level, current_thread_info()->cpu, cr30, cr31);
printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
- printk(level);
- print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
- printk(level);
- print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
- printk(level);
- print_symbol(" RP(r2): %s\n", regs->gr[2]);
- parisc_show_stack(current, NULL, regs);
+ if (user) {
+ printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+ printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+ printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+ } else {
+ printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+ printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+ printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+ parisc_show_stack(current, NULL, regs);
+ }
}
@@ -173,20 +177,15 @@
break;
if (__kernel_text_address(info->ip)) {
- printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
- print_symbol("%s\n", info->ip);
-#else
- if ((i & 0x03) == 0)
- printk("\n");
-#endif
+ printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+ info->ip, (void *) info->ip);
i++;
}
}
- printk("\n");
+ printk(KERN_CRIT "\n");
}
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs)
{
struct unwind_frame_info info;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 226ff06..dea3091 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -18,8 +18,8 @@
#size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
+ ethernet0 = &enet1;
+ ethernet1 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index cadd465..5c69b2f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -90,7 +90,7 @@
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
+ cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
new file mode 100644
index 0000000..9a9350d
--- /dev/null
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -0,0 +1,1176 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:49:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+# CONFIG_ACADIA is not set
+# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 663ec51..7513d36 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:20:16 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:31:16 2008
#
# CONFIG_PPC64 is not set
@@ -22,14 +22,13 @@
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -40,6 +39,7 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -93,8 +93,8 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -109,7 +109,9 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -122,10 +124,6 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -158,6 +156,7 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
@@ -174,9 +173,13 @@
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_IPIC is not set
@@ -196,7 +199,6 @@
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -211,6 +213,8 @@
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
@@ -225,15 +229,15 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -256,6 +260,7 @@
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -317,7 +322,6 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
@@ -352,8 +356,8 @@
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
@@ -361,36 +365,38 @@
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
@@ -411,6 +417,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -431,11 +438,10 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
@@ -455,11 +461,13 @@
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_OF_GPIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -478,7 +486,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
@@ -487,6 +495,7 @@
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -534,8 +543,12 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -556,6 +569,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -604,6 +618,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -611,9 +626,11 @@
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -624,11 +641,11 @@
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
# CONFIG_GAMEPORT is not set
#
@@ -656,11 +673,12 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -674,87 +692,41 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -763,6 +735,8 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -790,6 +764,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -826,6 +801,7 @@
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -838,6 +814,8 @@
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_XILINX=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -870,6 +848,7 @@
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -879,6 +858,8 @@
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -887,10 +868,11 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -899,7 +881,7 @@
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -923,6 +905,7 @@
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -954,19 +937,15 @@
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1023,7 +1002,6 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -1041,7 +1019,7 @@
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
@@ -1049,19 +1027,62 @@
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1069,12 +1090,14 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1147,6 +1170,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index c10f739..3df6274 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:11:37 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:12:40 2008
#
# CONFIG_PPC64 is not set
@@ -22,7 +22,7 @@
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -102,6 +103,7 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
@@ -110,9 +112,13 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -123,6 +129,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -137,19 +144,16 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
@@ -159,7 +163,10 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -183,7 +190,6 @@
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -197,6 +203,8 @@
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -211,19 +219,20 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -233,7 +242,7 @@
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
@@ -254,10 +263,6 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -308,6 +313,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -328,14 +334,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -446,6 +446,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -487,11 +488,11 @@
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -521,6 +522,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
@@ -532,7 +536,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
@@ -567,6 +570,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -596,25 +600,40 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -623,10 +642,13 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -640,24 +662,39 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -672,10 +709,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -695,11 +728,16 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -710,12 +748,16 @@
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -744,7 +786,6 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -757,7 +798,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -773,14 +814,19 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -792,12 +838,13 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -830,6 +877,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -860,6 +908,7 @@
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -870,14 +919,14 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -953,9 +1002,9 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -982,9 +1031,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -998,16 +1050,37 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
@@ -1018,14 +1091,19 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1063,6 +1141,10 @@
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1093,6 +1175,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 1a8a250..5b969f9 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:56 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:10:16 2008
#
# CONFIG_PPC64 is not set
@@ -22,7 +22,7 @@
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -103,7 +104,9 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -111,24 +114,30 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -143,19 +152,16 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
@@ -165,7 +171,10 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -198,11 +207,13 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -217,19 +228,20 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
@@ -243,7 +255,7 @@
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -269,10 +281,6 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -323,6 +331,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -343,14 +352,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -390,12 +393,16 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -412,7 +419,7 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
@@ -474,12 +481,12 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
@@ -535,18 +542,22 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -583,16 +594,19 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
@@ -605,22 +619,27 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -628,7 +647,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -657,6 +675,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -691,42 +710,63 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -735,29 +775,47 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -774,10 +832,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -788,17 +842,25 @@
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -810,12 +872,13 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -845,6 +908,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -864,6 +928,7 @@
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -874,14 +939,14 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -902,9 +967,9 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -929,9 +994,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -945,17 +1013,37 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
@@ -966,14 +1054,19 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1012,6 +1105,10 @@
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1042,6 +1139,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 8c7ba7c..3c0d4e5 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:22 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:11:02 2008
#
# CONFIG_PPC64 is not set
@@ -22,7 +22,7 @@
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -102,6 +103,7 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
@@ -110,9 +112,13 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -123,6 +129,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -137,19 +144,16 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
@@ -159,7 +163,10 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -183,7 +190,6 @@
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -197,6 +203,8 @@
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -211,19 +219,20 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -233,7 +242,7 @@
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
@@ -254,10 +263,6 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -308,6 +313,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -328,14 +334,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -445,9 +445,12 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -490,10 +493,10 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
@@ -501,7 +504,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -531,6 +533,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
@@ -542,7 +547,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
@@ -568,6 +572,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -596,24 +601,39 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -622,10 +642,13 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -633,6 +656,7 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
@@ -675,6 +699,7 @@
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -683,24 +708,39 @@
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -715,10 +755,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
@@ -729,6 +765,7 @@
#
# LED drivers
#
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
@@ -736,7 +773,9 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -767,6 +806,8 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -776,19 +817,25 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -800,12 +847,13 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -838,6 +886,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -868,6 +917,7 @@
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -878,14 +928,14 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -961,9 +1011,9 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -990,9 +1040,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1006,16 +1059,37 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
@@ -1026,14 +1100,19 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1071,6 +1150,10 @@
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1101,6 +1184,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 9c0caa4..9d02077 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:13:19 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:13:16 2008
#
# CONFIG_PPC64 is not set
@@ -22,7 +22,7 @@
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -104,7 +105,9 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -112,24 +115,30 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -144,19 +153,16 @@
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
@@ -166,7 +172,10 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -199,12 +208,14 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -219,17 +230,19 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
@@ -240,7 +253,7 @@
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -265,10 +278,6 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -313,6 +322,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -333,14 +343,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -484,12 +488,12 @@
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
@@ -545,18 +549,22 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -593,10 +601,14 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -606,7 +618,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
@@ -644,6 +655,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -675,43 +687,64 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -720,29 +753,47 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -759,10 +810,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -781,12 +828,17 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -799,12 +851,17 @@
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -833,7 +890,6 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -846,7 +902,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -862,10 +918,14 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
@@ -894,6 +954,8 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -903,19 +965,25 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -927,12 +995,13 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
@@ -964,6 +1033,7 @@
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -994,6 +1064,7 @@
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1004,13 +1075,13 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1070,9 +1141,9 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -1098,7 +1169,17 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1108,6 +1189,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 7672bfb..bc19005 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:39 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:30 2008
#
# CONFIG_PPC64 is not set
@@ -22,7 +22,7 @@
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -102,6 +103,7 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
@@ -110,14 +112,19 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -128,6 +135,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -142,19 +150,16 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
@@ -164,7 +169,10 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -188,7 +196,6 @@
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -202,6 +209,8 @@
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -216,19 +225,20 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -238,7 +248,7 @@
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
@@ -259,10 +269,6 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -313,6 +319,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -333,14 +340,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -451,6 +452,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -495,10 +497,10 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
@@ -507,7 +509,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -537,6 +538,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
@@ -548,7 +552,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
@@ -583,6 +586,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -611,26 +615,41 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -639,10 +658,13 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -650,6 +672,7 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
@@ -692,6 +715,7 @@
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -705,24 +729,39 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -737,10 +776,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -760,11 +795,16 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -775,12 +815,16 @@
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -809,7 +853,6 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -822,7 +865,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -838,10 +881,13 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -872,6 +918,8 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -881,19 +929,25 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -905,12 +959,13 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -943,6 +998,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -973,6 +1029,7 @@
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -983,14 +1040,14 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1066,9 +1123,9 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -1095,9 +1152,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1111,17 +1171,37 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
@@ -1132,14 +1212,19 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1178,6 +1263,10 @@
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1208,6 +1297,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 2da13e0..07ccaf8 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -838,7 +838,7 @@
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 740c9f2..15c5604 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 18 14:19:54 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:07 2008
#
# CONFIG_PPC64 is not set
@@ -22,14 +22,18 @@
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -47,7 +51,8 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -66,17 +71,15 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,32 +91,49 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -127,29 +147,34 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -163,7 +188,6 @@
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
@@ -183,12 +207,18 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -198,26 +228,25 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
+CONFIG_SUSPEND_FREEZER=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -226,7 +255,7 @@
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -237,6 +266,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,15 +276,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -267,6 +293,7 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -297,8 +324,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -306,6 +331,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -322,17 +348,12 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -357,6 +378,8 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -428,6 +451,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -444,14 +468,20 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -516,6 +546,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -528,9 +559,13 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -540,7 +575,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -570,6 +604,7 @@
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -586,25 +621,28 @@
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -620,6 +658,7 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -634,10 +673,14 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -647,6 +690,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -662,7 +706,6 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -672,7 +715,30 @@
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
@@ -683,8 +749,14 @@
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -718,69 +790,80 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -788,7 +871,9 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -818,6 +903,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -827,9 +913,12 @@
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -837,6 +926,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
@@ -850,23 +940,39 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -874,11 +980,78 @@
# Graphics support
#
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
@@ -886,15 +1059,64 @@
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_APPLE is not set
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -903,14 +1125,20 @@
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -923,12 +1151,17 @@
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -948,7 +1181,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -956,15 +1191,10 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -973,7 +1203,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -989,18 +1219,14 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
@@ -1009,17 +1235,15 @@
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -1031,21 +1255,19 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1072,6 +1294,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -1101,8 +1324,11 @@
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1110,15 +1336,14 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1173,7 +1398,6 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1181,6 +1405,7 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -1191,7 +1416,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1199,6 +1424,7 @@
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1206,10 +1432,14 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1220,17 +1450,39 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1240,47 +1492,98 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index c15c91d..4256e2c 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
#
# CONFIG_PPC64 is not set
@@ -500,15 +500,17 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -632,7 +634,13 @@
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
@@ -660,7 +668,8 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@@ -757,6 +766,11 @@
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -776,11 +790,11 @@
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -792,6 +806,7 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -816,13 +831,65 @@
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -851,6 +918,7 @@
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -1077,10 +1145,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 55edbd5..cfc94cf 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:28:58 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:06:19 2008
#
# CONFIG_PPC64 is not set
@@ -506,15 +506,17 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -680,7 +682,13 @@
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
@@ -708,7 +716,8 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@@ -806,6 +815,11 @@
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -826,11 +840,11 @@
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -842,6 +856,7 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -866,13 +881,65 @@
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1002,6 +1069,7 @@
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -1227,10 +1295,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 5a44174..68b7526 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -280,7 +280,6 @@
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void set_huge_psize(int psize);
extern void add_gpage(unsigned long addr, unsigned long page_size,
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 280a90c..c9c678f 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -55,8 +55,6 @@
#ifdef __powerpc64__
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 80cac98..31c18b5 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -34,7 +34,12 @@
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
- b __init_fpu_44x
+ mflr r4
+ bl __init_fpu_44x
+ bl __fixup_440A_mcheck
+ mtlr r4
+ blr
+
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index b00982e..383ed6e 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -57,12 +57,18 @@
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
- crclr so
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
ACCOUNT_CPU_USER_ENTRY(r10, r11)
+ /*
+ * This "crclr so" clears CR0.SO, which is the error indication on
+ * return from this system call. There must be no cmp instruction
+ * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+ * CR0.SO will get set, causing all system calls to appear to fail.
+ */
+ crclr so
std r2,GPR2(r1)
std r3,GPR3(r1)
std r4,GPR4(r1)
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index bc1fb27..a11d689 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -250,8 +250,11 @@
* parsing
*/
dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 86a2ffc..20885a3 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -717,9 +717,11 @@
BUG_ON(!c->hotpluggable);
+#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index cecbbc7..29954dc 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -93,7 +93,7 @@
unsigned long __init mmu_mapin_ram(void)
{
- unsigned long v, s;
+ unsigned long v, s, mapped;
phys_addr_t p;
v = KERNELBASE;
@@ -130,5 +130,17 @@
s -= LARGE_PAGE_SIZE_4M;
}
- return total_lowmem - s;
+ mapped = total_lowmem - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 16 and 4 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the LMB to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+
+ __initial_memory_limit_addr = memstart_addr + mapped;
+
+ return mapped;
}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index a117024..7bbf4e4 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -677,7 +677,7 @@
return err;
}
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
{
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable limits. */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index eb505ad..a8397bb 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -865,72 +865,30 @@
.priority = 1 /* Must run before sched domains notifier. */
};
-void __init do_init_bootmem(void)
+static void mark_reserved_regions_for_nid(int nid)
{
- int nid;
- unsigned int i;
+ struct pglist_data *node = NODE_DATA(nid);
+ int i;
- min_low_pfn = 0;
- max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
- max_pfn = max_low_pfn;
-
- if (parse_numa_properties())
- setup_nonnuma();
- else
- dump_numa_memory_topology();
-
- register_cpu_notifier(&ppc64_numa_nb);
- cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
- (void *)(unsigned long)boot_cpuid);
-
- for_each_online_node(nid) {
- unsigned long start_pfn, end_pfn;
- unsigned long bootmem_paddr;
- unsigned long bootmap_pages;
-
- get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
-
- /* Allocate the node structure node local if possible */
- NODE_DATA(nid) = careful_allocation(nid,
- sizeof(struct pglist_data),
- SMP_CACHE_BYTES, end_pfn);
- NODE_DATA(nid) = __va(NODE_DATA(nid));
- memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-
- dbg("node %d\n", nid);
- dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
-
- NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-
- if (NODE_DATA(nid)->node_spanned_pages == 0)
- continue;
-
- dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT);
- dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT);
-
- bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
- bootmem_paddr = (unsigned long)careful_allocation(nid,
- bootmap_pages << PAGE_SHIFT,
- PAGE_SIZE, end_pfn);
- memset(__va(bootmem_paddr), 0, bootmap_pages << PAGE_SHIFT);
-
- dbg("bootmap_paddr = %lx\n", bootmem_paddr);
-
- init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
- start_pfn, end_pfn);
-
- free_bootmem_with_active_regions(nid, end_pfn);
- }
-
- /* Mark reserved regions */
for (i = 0; i < lmb.reserved.cnt; i++) {
unsigned long physbase = lmb.reserved.region[i].base;
unsigned long size = lmb.reserved.region[i].size;
unsigned long start_pfn = physbase >> PAGE_SHIFT;
unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
struct node_active_region node_ar;
+ unsigned long node_end_pfn = node->node_start_pfn +
+ node->node_spanned_pages;
+
+ /*
+ * Check to make sure that this lmb.reserved area is
+ * within the bounds of the node that we care about.
+ * Checking the nid of the start and end points is not
+ * sufficient because the reserved area could span the
+ * entire node.
+ */
+ if (end_pfn <= node->node_start_pfn ||
+ start_pfn >= node_end_pfn)
+ continue;
get_node_active_region(start_pfn, &node_ar);
while (start_pfn < end_pfn &&
@@ -964,11 +922,81 @@
size = size - reserve_size;
get_node_active_region(start_pfn, &node_ar);
}
-
}
+}
- for_each_online_node(nid)
+
+void __init do_init_bootmem(void)
+{
+ int nid;
+ unsigned int i;
+
+ min_low_pfn = 0;
+ max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_pfn = max_low_pfn;
+
+ if (parse_numa_properties())
+ setup_nonnuma();
+ else
+ dump_numa_memory_topology();
+
+ register_cpu_notifier(&ppc64_numa_nb);
+ cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
+ (void *)(unsigned long)boot_cpuid);
+
+ for_each_online_node(nid) {
+ unsigned long start_pfn, end_pfn;
+ unsigned long bootmem_paddr;
+ unsigned long bootmap_pages;
+
+ get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+
+ /*
+ * Allocate the node structure node local if possible
+ *
+ * Be careful moving this around, as it relies on all
+ * previous nodes' bootmem to be initialized and have
+ * all reserved areas marked.
+ */
+ NODE_DATA(nid) = careful_allocation(nid,
+ sizeof(struct pglist_data),
+ SMP_CACHE_BYTES, end_pfn);
+ NODE_DATA(nid) = __va(NODE_DATA(nid));
+ memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+ dbg("node %d\n", nid);
+ dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
+
+ NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+ NODE_DATA(nid)->node_start_pfn = start_pfn;
+ NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+
+ if (NODE_DATA(nid)->node_spanned_pages == 0)
+ continue;
+
+ dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT);
+ dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT);
+
+ bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+ bootmem_paddr = (unsigned long)careful_allocation(nid,
+ bootmap_pages << PAGE_SHIFT,
+ PAGE_SIZE, end_pfn);
+ memset(__va(bootmem_paddr), 0, bootmap_pages << PAGE_SHIFT);
+
+ dbg("bootmap_paddr = %lx\n", bootmem_paddr);
+
+ init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
+ start_pfn, end_pfn);
+
+ free_bootmem_with_active_regions(nid, end_pfn);
+ /*
+ * Be very careful about moving this around. Future
+ * calls to careful_allocation() depend on this getting
+ * done correctly.
+ */
+ mark_reserved_regions_for_nid(nid);
sparse_memory_present_with_active_regions(nid);
+ }
}
void __init paging_init(void)
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 896548b..442cf36 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -95,6 +95,7 @@
struct axon_msic *msic = get_irq_data(irq);
u32 write_offset, msi;
int idx;
+ int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
@@ -102,7 +103,7 @@
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
- while (msic->read_offset != write_offset) {
+ while (msic->read_offset != write_offset && retry < 100) {
idx = msic->read_offset / sizeof(__le32);
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
@@ -110,13 +111,37 @@
pr_debug("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
+ if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+ generic_handle_irq(msi);
+ msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
+ } else {
+ /*
+ * Reading the MSIC_WRITE_OFFSET_REG does not
+ * reliably flush the outstanding DMA to the
+ * FIFO buffer. Here we were reading stale
+ * data, so we need to retry.
+ */
+ udelay(1);
+ retry++;
+ pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ continue;
+ }
+
+ if (retry) {
+ pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ msi, retry);
+ retry = 0;
+ }
+
msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
msic->read_offset &= MSIC_FIFO_SIZE_MASK;
+ }
- if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host)
- generic_handle_irq(msi);
- else
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ if (retry) {
+ printk(KERN_WARNING "axon_msi: irq timed out\n");
+
+ msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
+ msic->read_offset &= MSIC_FIFO_SIZE_MASK;
}
desc->chip->eoi(irq);
@@ -364,6 +389,7 @@
dn->full_name);
goto out_free_fifo;
}
+ memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
NR_IRQS, &msic_host_ops, 0);
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index c0d86e1..9046803 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -129,10 +129,15 @@
return cpus_weight(cpu_possible_map);
}
-static void __devinit smp_iic_setup_cpu(int cpu)
+static void __devinit smp_cell_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
iic_setup_cpu();
+
+ /*
+ * change default DABRX to allow user watchpoints
+ */
+ mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
static DEFINE_SPINLOCK(timebase_lock);
@@ -192,7 +197,7 @@
.message_pass = smp_iic_message_pass,
.probe = smp_iic_probe,
.kick_cpu = smp_cell_kick_cpu,
- .setup_cpu = smp_iic_setup_cpu,
+ .setup_cpu = smp_cell_setup_cpu,
.cpu_bootable = smp_cell_cpu_bootable,
};
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index b73c369..1b26071 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -390,6 +390,9 @@
if (offset >= ps_size)
return VM_FAULT_SIGBUS;
+ if (fatal_signal_pending(current))
+ return VM_FAULT_SIGBUS;
+
/*
* Because we release the mmap_sem, the context may be destroyed while
* we're in spu_wait. Grab an extra reference so it isn't destroyed
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 57cc565..0b192a1 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -17,23 +17,20 @@
answer Y or M. Otherwise say N.
config PPC_BESTCOMM_ATA
- tristate "Bestcomm ATA task support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the ATA task.
config PPC_BESTCOMM_FEC
- tristate "Bestcomm FEC tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the FEC tasks.
config PPC_BESTCOMM_GEN_BD
- tristate "Bestcomm GenBD tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the GenBD tasks.
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index f6299cc..b24e1d08 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1271,6 +1271,7 @@
void __init mpic_init(struct mpic *mpic)
{
int i;
+ int cpu;
BUG_ON(mpic->num_sources == 0);
@@ -1313,6 +1314,11 @@
mpic_pasemi_msi_init(mpic);
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+ else
+ cpu = 0;
+
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i |
@@ -1323,8 +1329,7 @@
continue;
/* init hw */
mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
- mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
- 1 << hard_smp_processor_id());
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
}
/* Init spurious vector */
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index b7aefd0..a22e1a2 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,8 +107,8 @@
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
- res.start, regs);
+ printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+ (unsigned long long) res.start, regs);
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 9b0bc2c..a0e748d 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 19:43:29 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Nov 27 11:00:49 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
@@ -45,6 +45,7 @@
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_GROUP_SCHED=y
@@ -84,6 +85,7 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -92,16 +94,10 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -135,6 +131,7 @@
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Base setup
@@ -189,7 +186,6 @@
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
@@ -200,9 +196,11 @@
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# I/O subsystem configuration
@@ -220,6 +218,8 @@
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
@@ -255,7 +255,7 @@
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=m
+CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -282,7 +282,6 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
@@ -331,10 +330,12 @@
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
@@ -374,6 +375,7 @@
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
@@ -406,6 +408,7 @@
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
@@ -424,6 +427,7 @@
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PCMCIA is not set
@@ -473,7 +477,7 @@
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
@@ -525,6 +529,7 @@
CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
@@ -555,6 +560,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
@@ -632,13 +640,12 @@
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
+# CONFIG_REGULATOR is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -650,13 +657,14 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
@@ -688,6 +696,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
@@ -728,6 +737,7 @@
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -800,12 +810,24 @@
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
@@ -816,16 +838,19 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
@@ -877,7 +902,7 @@
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -898,6 +923,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
# CONFIG_ZCRYPT_MONOLITHIC is not set
@@ -912,8 +942,6 @@
# Library routines
#
CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 7fc7613..5caddd4 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -679,8 +679,6 @@
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- if (mm->context.has_pgste)
- ptep_rcp_copy(ptep);
pte_val(*ptep) = _PAGE_TYPE_EMPTY;
if (mm->context.noexec)
pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index a7226f8..5396f9f 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -321,8 +321,8 @@
psw_t psw;
unsigned long gprs[NUM_GPRS];
unsigned long orig_gpr2;
+ unsigned short svcnr;
unsigned short ilc;
- unsigned short trap;
};
#endif
@@ -486,8 +486,6 @@
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define user_stack_pointer(regs)((regs)->gprs[15])
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index 6e62397..2429b87 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -17,9 +17,7 @@
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- if (regs->trap != __LC_SVC_OLD_PSW)
- return -1;
- return regs->gprs[2];
+ return regs->svcnr ? regs->svcnr : -1;
}
static inline void syscall_rollback(struct task_struct *task,
@@ -52,18 +50,20 @@
unsigned int i, unsigned int n,
unsigned long *args)
{
+ unsigned long mask = -1UL;
+
BUG_ON(i + n > 6);
#ifdef CONFIG_COMPAT
- if (test_tsk_thread_flag(task, TIF_31BIT)) {
- if (i + n == 6)
- args[--n] = (u32) regs->args[0];
- while (n-- > 0)
- args[n] = (u32) regs->gprs[2 + i + n];
- }
+ if (test_tsk_thread_flag(task, TIF_31BIT))
+ mask = 0xffffffff;
#endif
if (i + n == 6)
- args[--n] = regs->args[0];
- memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0]));
+ args[--n] = regs->args[0] & mask;
+ while (n-- > 0)
+ if (i + n > 0)
+ args[n] = regs->gprs[2 + i + n] & mask;
+ if (i == 0)
+ args[0] = regs->orig_gpr2 & mask;
}
static inline void syscall_set_arguments(struct task_struct *task,
@@ -74,7 +74,11 @@
BUG_ON(i + n > 6);
if (i + n == 6)
regs->args[0] = args[--n];
- memcpy(®s->gprs[2 + i], args, n * sizeof(args[0]));
+ while (n-- > 0)
+ if (i + n > 0)
+ regs->gprs[2 + i + n] = args[n];
+ if (i == 0)
+ regs->orig_gpr2 = args[0];
}
#endif /* _ASM_SYSCALL_H */
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index fa28eca..3d144e6 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -32,7 +32,7 @@
DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
- DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap));
+ DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index c7f02e7..b537cb0 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -340,7 +340,7 @@
return err;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 08844fc..198ea18 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -46,7 +46,7 @@
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
@@ -183,11 +183,10 @@
.macro CREATE_STACK_FRAME psworg,savearea
s %r15,BASED(.Lc_spsize) # make room for registers & psw
mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
st %r12,__SF_BACKCHAIN(%r15) # clear back chain
@@ -264,16 +263,17 @@
#endif
sysc_do_svc:
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- sla %r7,2 # *4 and test for svc 0
+ ltr %r7,%r7 # test for svc 0
bnz BASED(sysc_nr_ok) # svc number > 0
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
bnl BASED(sysc_nr_ok)
lr %r7,%r1 # copy svc number to %r7
- sla %r7,2 # *4
sysc_nr_ok:
mvc SP_ARGS(4,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sll %r7,2 # svc number *4
l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
l %r8,0(%r7,%r8) # get system call addr.
@@ -376,7 +376,6 @@
sysc_restart:
ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
l %r7,SP_R2(%r15) # load new svc number
- sla %r7,2
mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
lm %r2,%r6,SP_R2(%r15) # load svc arguments
b BASED(sysc_do_restart) # restart svc
@@ -386,7 +385,8 @@
#
sysc_singlestep:
ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_return) # load adr. of system return
@@ -407,7 +407,7 @@
bnl BASED(sysc_tracenogo)
l %r8,BASED(.Lsysc_table)
lr %r7,%r2
- sll %r7,2 # *4
+ sll %r7,2 # svc number *4
l %r8,0(%r7,%r8)
sysc_tracego:
lm %r3,%r6,SP_R3(%r15)
@@ -586,7 +586,8 @@
# per was called from kernel, must be kprobes
#
kernel_per:
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_restore)# load adr. of system return
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 41aca06..89c121a 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -46,7 +46,7 @@
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
@@ -171,11 +171,10 @@
.macro CREATE_STACK_FRAME psworg,savearea
aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
@@ -250,16 +249,17 @@
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- slag %r7,%r7,2 # *4 and test for svc 0
+ ltgr %r7,%r7 # test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
- slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sllg %r7,%r7,2 # svc number * 4
larl %r10,sys_call_table
#ifdef CONFIG_COMPAT
tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ?
@@ -363,7 +363,6 @@
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
- slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
@@ -372,9 +371,8 @@
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
- ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
@@ -392,7 +390,7 @@
lghi %r0,NR_syscalls
clgr %r0,%r2
jnh sysc_tracenogo
- slag %r7,%r2,2 # *4
+ sllg %r7,%r2,2 # svc number *4
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
@@ -567,8 +565,7 @@
# per was called from kernel, must be kprobes
#
kernel_per:
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_restore # load adr. of system ret, no work
jg do_single_step # branch to do_single_step
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index 7ad0039..e807168 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -26,7 +26,7 @@
/*
* Initial thread structure.
*
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD_SIZE aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 1f31be1..38ff2bc 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -657,7 +657,7 @@
* debugger stored an invalid system call number. Skip
* the system call and the system call restart handling.
*/
- regs->trap = -1;
+ regs->svcnr = 0;
ret = -1;
}
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 4f7fc30..8e6812a 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -160,7 +160,7 @@
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
@@ -445,7 +445,7 @@
oldset = ¤t->blocked;
/* Are we from a system call? */
- if (regs->trap == __LC_SVC_OLD_PSW) {
+ if (regs->svcnr) {
continue_addr = regs->psw.addr;
restart_addr = continue_addr - regs->ilc;
retval = regs->gprs[2];
@@ -462,7 +462,7 @@
case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
- regs->trap = -1; /* Don't deal with this again. */
+ regs->svcnr = 0; /* Don't deal with this again. */
}
/* Get signal to deliver. When running under ptrace, at this point
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index b94e9e3..eccefbb 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -59,7 +59,7 @@
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 jiffies_timer_cc;
+static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
@@ -68,7 +68,7 @@
*/
unsigned long long sched_clock(void)
{
- return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
}
/*
@@ -229,13 +229,10 @@
*/
void __init time_init(void)
{
- u64 init_timer_cc;
-
- init_timer_cc = reset_tod_clock();
- jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+ sched_clock_base_cc = reset_tod_clock();
/* set xtime */
- tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
@@ -289,7 +286,7 @@
delta = -delta;
adjust.offset = -ticks * (1000000 / HZ);
}
- jiffies_timer_cc += delta;
+ sched_clock_base_cc += delta;
if (adjust.offset != 0) {
printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
adjust.offset);
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 607bd67..d796d05 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -2,6 +2,7 @@
* Written by Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
+#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
@@ -86,7 +87,7 @@
}
_edata = .; /* End of data section */
- . = ALIGN(2 * PAGE_SIZE); /* init_task */
+ . = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : {
*(.data.init_task)
}
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index 3d3e9c1..84e969f 100644
--- a/arch/sparc/include/asm/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -142,8 +142,6 @@
};
extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define force_successful_syscall_return() \
do { current_thread_info()->syscall_noerror = 1; \
} while (0)
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index e7a0edf..1fc17f5 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -126,7 +126,7 @@
unsigned int fsr_storage;
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
{
int psr_impl, psr_vers, fpu_vers;
int i, psr;
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 2d325fd..51b4042 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -72,7 +72,7 @@
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .text
+ .section .text.head,"ax"
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 1619ec1..e396c1f 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -35,7 +35,7 @@
#include "irq.h"
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
unsigned char boot_cpu_id = 0;
unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
@@ -120,7 +120,7 @@
panic("SMP bolixed\n");
}
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
void smp_send_reschedule(int cpu)
{
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 7a6a5e7..16ab0cb 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -83,7 +83,7 @@
"i" (ASI_M_CTL));
}
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
{
int cpuid = hard_smp4d_processor_id();
extern spinlock_t sun4d_imsk_lock;
@@ -386,7 +386,7 @@
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = hard_smp4d_processor_id();
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 5fc386d..4f8d605 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -343,7 +343,7 @@
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
diff --git a/arch/sparc/kernel/trampoline.S b/arch/sparc/kernel/trampoline.S
index 356c56a..5e235c5 100644
--- a/arch/sparc/kernel/trampoline.S
+++ b/arch/sparc/kernel/trampoline.S
@@ -18,7 +18,7 @@
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
- __INIT
+ __CPUINIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
@@ -109,7 +109,7 @@
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
- __INIT
+ __CPUINIT
.align 4
sun4d_cpu_startup:
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index b1002c6..5b7e69a 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -13,6 +13,7 @@
.text 0xf0004000 :
{
_text = .;
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 6a5d7ca..dd8aa36 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1251,7 +1251,7 @@
/* Paging initialization on the Sparc Reference MMU. */
extern void sparc_context_init(int);
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
@@ -1446,7 +1446,7 @@
(int)vac_cache_size, (int)vac_line_size);
}
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
{
volatile unsigned long clear;
unsigned long mreg = srmmu_get_mmureg();
@@ -1501,7 +1501,7 @@
hypersparc_setup_blockops();
}
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long faddr, tagval;
@@ -1589,7 +1589,7 @@
init_cypress_common();
}
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
{
unsigned long mreg;
@@ -1771,7 +1771,7 @@
}
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long ccreg;
@@ -1834,7 +1834,7 @@
poke_srmmu = poke_turbosparc;
}
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
{
unsigned long mreg = srmmu_get_mmureg();
@@ -1876,7 +1876,7 @@
tsunami_setup_blockops();
}
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
{
unsigned long mreg = srmmu_get_mmureg();
static int smp_catch;
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index e562711..f500b06 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -282,7 +282,7 @@
return kern_base + (val - KERNBASE);
}
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
@@ -343,7 +343,7 @@
*/
static struct thread_info *cpu_new_thread = NULL;
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
{
struct trap_per_cpu *tb = &trap_block[cpu];
unsigned long entry =
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 3c10daf..185f346 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -956,7 +956,7 @@
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h
index 5b28995..d02d936 100644
--- a/arch/x86/include/asm/pci_64.h
+++ b/arch/x86/include/asm/pci_64.h
@@ -34,8 +34,6 @@
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
@@ -49,18 +47,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_X86_PCI_64_H */
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index d1531c8..eefb059 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -271,8 +271,6 @@
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 04a7f96..16f9487 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1315,7 +1315,7 @@
}
}
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index d3dcd58..7f05f44 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -115,9 +115,20 @@
u32 i = 0;
if (cpu_family == CPU_HW_PSTATE) {
- rdmsr(MSR_PSTATE_STATUS, lo, hi);
- i = lo & HW_PSTATE_MASK;
- data->currpstate = i;
+ if (data->currpstate == HW_PSTATE_INVALID) {
+ /* read (initial) hw pstate if not yet set */
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+
+ /*
+ * a workaround for family 11h erratum 311 might cause
+ * an "out-of-range Pstate if the core is in Pstate-0
+ */
+ if (i >= data->numps)
+ data->currpstate = HW_PSTATE_0;
+ else
+ data->currpstate = i;
+ }
return 0;
}
do {
@@ -1121,6 +1132,7 @@
}
data->cpu = pol->cpu;
+ data->currpstate = HW_PSTATE_INVALID;
if (powernow_k8_cpu_init_acpi(data)) {
/*
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index ab48cfe..65cfb5d 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -5,6 +5,19 @@
* http://www.gnu.org/licenses/gpl.html
*/
+
+enum pstate {
+ HW_PSTATE_INVALID = 0xff,
+ HW_PSTATE_0 = 0,
+ HW_PSTATE_1 = 1,
+ HW_PSTATE_2 = 2,
+ HW_PSTATE_3 = 3,
+ HW_PSTATE_4 = 4,
+ HW_PSTATE_5 = 5,
+ HW_PSTATE_6 = 6,
+ HW_PSTATE_7 = 7,
+};
+
struct powernow_k8_data {
unsigned int cpu;
@@ -23,7 +36,9 @@
u32 exttype; /* extended interface = 1 */
/* keep track of the current fid / vid or pstate */
- u32 currvid, currfid, currpstate;
+ u32 currvid;
+ u32 currfid;
+ enum pstate currpstate;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 1fec0f9..9043251 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3755,7 +3755,9 @@
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
+ struct irq_desc *desc;
struct irq_cfg *cfg;
+ cpumask_t mask;
if (skip_ioapic_setup == 1)
return;
@@ -3772,16 +3774,30 @@
* cpu is online.
*/
cfg = irq_cfg(irq);
- if (!cfg->vector)
+ if (!cfg->vector) {
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
-#ifdef CONFIG_INTR_REMAP
- else if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
+ continue;
+
+ }
+
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ desc = irq_to_desc(irq);
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
else
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+ mask = TARGET_CPUS;
+
+#ifdef CONFIG_INTR_REMAP
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, mask);
+ else
+#endif
+ set_ioapic_affinity_irq(irq, mask);
}
}
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 1c9cc43..e169ae9 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -128,7 +128,7 @@
}
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
{
/*
* Now that the first cpu already had this clocksource initialized,
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 3c27a80..2051dc9 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -496,21 +496,24 @@
pci_siemens_interrupt_controller);
/*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes. Even if the device is capable, that doesn't mean we can
- * access it. Maybe we don't have a way to generate extended config space
- * accesses. So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
*/
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
{
dev->cfg_size = pci_cfg_space_size_ext(dev);
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
/*
* SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d77da61..acd9b67 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -362,7 +362,7 @@
alternatives_smp_switch(0);
}
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index d7422dc..9e1afae 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -49,7 +49,7 @@
void xen_mark_init_mm_pinned(void);
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 1423b0c..a0a178d 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -174,6 +174,15 @@
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
+ /* if power units are mW, convert to mA by
+ dividing by current voltage (mV/1000) */
+ if (!battery->power_unit) {
+ if (battery->voltage_now) {
+ val->intval /= battery->voltage_now;
+ val->intval *= 1000;
+ } else
+ val->intval = -1;
+ }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index ea92bac..09c6980 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -176,16 +176,6 @@
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
@@ -193,295 +183,21 @@
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
@@ -519,113 +235,6 @@
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index cf41f9f..30f3ef2 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -219,7 +219,8 @@
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 4be2521..c811142 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -35,7 +35,6 @@
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
@@ -97,54 +96,44 @@
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
@@ -1296,34 +1285,6 @@
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
@@ -1350,21 +1311,6 @@
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index bd5253e..39b7233 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -751,16 +751,6 @@
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 80c0868..28a691cc 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -90,6 +90,18 @@
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
@@ -235,7 +247,11 @@
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
@@ -323,6 +339,12 @@
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
@@ -340,6 +362,22 @@
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 66aac06..25f531d 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -848,8 +848,6 @@
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
toshiba_acpi_exit();
return ret;
}
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index e827be3..f844941 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -259,34 +259,26 @@
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 8e37be1..d6d97d8 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1066,6 +1066,21 @@
if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
return 1;
+ /* TECRA M4 sometimes forgets its identify and reports bogus
+ * DMI information. As the bogus information is a bit
+ * generic, match as many entries as possible. This manual
+ * matching is necessary because dmi_system_id.matches is
+ * limited to four entries.
+ */
+ if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+ return 1;
+
return 0;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4214bfb1..5e2eb74 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2492,6 +2492,13 @@
}
}
+ if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+ "firmware update to be fully functional.\n");
+ ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
+ "or visit http://ata.wiki.kernel.org.\n");
+ }
+
return 0;
err_out_nosup:
@@ -4042,6 +4049,20 @@
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
+ /* Seagate NCQ + FLUSH CACHE firmware bug */
+ { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index f8b3ffc..c2e6fb9 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -39,9 +39,11 @@
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
+#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
@@ -72,11 +74,12 @@
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
+ int retlen = buflen;
if (write_data) {
for (; buflen > 0; buflen--, buf++)
@@ -87,6 +90,7 @@
}
rb532_pata_finish_io(adev->link->ap);
+ return retlen;
}
static void rb532_pata_freeze(struct ata_port *ap)
@@ -146,13 +150,14 @@
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ecab9e6..29e1dfa 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -194,7 +194,7 @@
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
@@ -628,8 +628,8 @@
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
@@ -935,7 +935,8 @@
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
@@ -1017,8 +1018,8 @@
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
@@ -1035,8 +1036,8 @@
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
@@ -1059,7 +1060,7 @@
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
@@ -1119,7 +1120,7 @@
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
@@ -1165,7 +1166,7 @@
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 0f004b6..03f95ec 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -27,7 +27,7 @@
static int uninorth_rev;
static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
static int uninorth_fetch_size(void)
{
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 44e5d60..4b10770 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -3739,7 +3739,7 @@
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
@@ -3935,7 +3935,7 @@
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 59f4721..1412a8d 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1795,12 +1795,15 @@
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = tty_driver_kref_get(console_device(&index));
- if (driver) {
- /* Don't let /dev/console block */
- filp->f_flags |= O_NONBLOCK;
- noctty = 1;
- goto got_driver;
+ struct tty_driver *console_driver = console_device(&index);
+ if (console_driver) {
+ driver = tty_driver_kref_get(console_driver);
+ if (driver) {
+ /* Don't let /dev/console block */
+ filp->f_flags |= O_NONBLOCK;
+ noctty = 1;
+ goto got_driver;
+ }
}
mutex_unlock(&tty_mutex);
return -ENODEV;
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index ed132fe..d161319 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -626,7 +626,7 @@
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at %Lx\n",
- regs_res->start);
+ (unsigned long long) regs_res->start);
retval = -EBUSY;
goto failed1;
}
@@ -645,9 +645,10 @@
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %Lx\n",
- (unsigned long int)drvdata->mem_start,
- drvdata->base_address, drvdata->mem_size);
+ dev_info(dev, "ioremap %llx to %p with size %llx\n",
+ (unsigned long long) drvdata->mem_start,
+ drvdata->base_address,
+ (unsigned long long) drvdata->mem_size);
cdev_init(&drvdata->cdev, &hwicap_fops);
drvdata->cdev.owner = THIS_MODULE;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index b6ad3ac..2460766 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1357,7 +1357,7 @@
return ret;
}
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
@@ -1622,7 +1622,7 @@
.name = "talitos",
.match_table = talitos_match,
.probe = talitos_probe,
- .remove = __devexit_p(talitos_remove),
+ .remove = talitos_remove,
};
static int __init talitos_init(void)
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
index e43bdc4..ebb037b 100644
--- a/drivers/edac/i82875p_edac.c
+++ b/drivers/edac/i82875p_edac.c
@@ -182,8 +182,6 @@
* already registered driver
*/
-static int i82875p_registered = 1;
-
static struct edac_pci_ctl_info *i82875p_pci;
static void i82875p_get_error_info(struct mem_ctl_info *mci,
@@ -295,6 +293,7 @@
"%s(): pci_bus_add_device() Failed\n",
__func__);
}
+ pci_bus_assign_resources(dev->bus);
}
*ovrfl_pdev = dev;
@@ -409,6 +408,9 @@
goto fail0;
}
+ /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
+ kobject_get(&mci->edac_mci_kobj);
+
debugf3("%s(): init mci\n", __func__);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
@@ -451,6 +453,7 @@
return 0;
fail1:
+ kobject_put(&mci->edac_mci_kobj);
edac_mc_free(mci);
fail0:
@@ -578,12 +581,11 @@
{
debugf3("%s()\n", __func__);
+ i82875p_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+
pci_unregister_driver(&i82875p_driver);
- if (!i82875p_registered) {
- i82875p_remove_one(mci_pdev);
- pci_dev_put(mci_pdev);
- }
}
module_init(i82875p_init);
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 97df6da..e54403e 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -372,6 +372,11 @@
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
+ .model = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
.model = 0x000023,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 3ab1e9c..996097a 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -305,6 +305,8 @@
return;
}
+ drm_vblank_cleanup(dev);
+
drm_lastclose(dev);
if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 15c8dab..1e787f8 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -94,7 +94,7 @@
}
}
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
{
/* Bail if the driver didn't call drm_vblank_init() */
if (dev->num_crtcs == 0)
@@ -278,8 +278,6 @@
free_irq(dev->pdev->irq, dev);
- drm_vblank_cleanup(dev);
-
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0d215e3..ba89b42 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -856,6 +856,13 @@
spin_lock_init(&dev_priv->user_irq_lock);
+ ret = drm_vblank_init(dev, I915_NUM_PIPE);
+
+ if (ret) {
+ (void) i915_driver_unload(dev);
+ return ret;
+ }
+
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ef1c0b8..0a4f39b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -47,6 +47,8 @@
PIPE_B,
};
+#define I915_NUM_PIPE 2
+
/* Interface history:
*
* 1.1: Original.
@@ -132,6 +134,7 @@
int user_irq_refcount;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
+ u32 pipestat[2];
int tex_lru_log_granularity;
int allow_batchbuffer;
@@ -147,6 +150,7 @@
u32 saveDSPBCNTR;
u32 saveDSPARB;
u32 saveRENDERSTANDBY;
+ u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
@@ -446,6 +450,13 @@
struct drm_file *file_priv);
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6b4a2bd..d58ddef 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -31,6 +31,8 @@
#include "i915_drv.h"
#include <linux/swap.h>
+#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
static int
i915_gem_object_set_domain(struct drm_gem_object *obj,
uint32_t read_domains,
@@ -83,20 +85,14 @@
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_get_aperture *args = data;
- struct drm_i915_gem_object *obj_priv;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
args->aper_size = dev->gtt_total;
- args->aper_available_size = args->aper_size;
-
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
- if (obj_priv->pin_count > 0)
- args->aper_available_size -= obj_priv->obj->size;
- }
+ args->aper_available_size = (args->aper_size -
+ atomic_read(&dev->pin_memory));
return 0;
}
@@ -1870,17 +1866,6 @@
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
- if (obj_priv->gtt_space == NULL) {
- /* We evicted the buffer in the process of validating
- * our set of buffers in. We could try to recover by
- * kicking them everything out and trying again from
- * the start.
- */
- ret = -ENOMEM;
- goto err;
- }
/* make sure all previous memory operations have passed */
ret = i915_gem_object_set_domain(obj,
@@ -2299,29 +2284,52 @@
i915_gem_retire_requests(dev);
- /* Active and flushing should now be empty as we've
- * waited for a sequence higher than any pending execbuffer
- */
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+ if (!dev_priv->mm.wedged) {
+ /* Active and flushing should now be empty as we've
+ * waited for a sequence higher than any pending execbuffer
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.active_list));
+ WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+ /* Request should now be empty as we've also waited
+ * for the last request in the list
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.request_list));
+ }
- /* Request should now be empty as we've also waited
- * for the last request in the list
+ /* Empty the active and flushing lists to inactive. If there's
+ * anything left at this point, it means that we're wedged and
+ * nothing good's going to happen by leaving them there. So strip
+ * the GPU domains and just stuff them onto inactive.
*/
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
+ while (!list_empty(&dev_priv->mm.active_list)) {
+ struct drm_i915_gem_object *obj_priv;
- /* Move all buffers out of the GTT. */
+ obj_priv = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+ while (!list_empty(&dev_priv->mm.flushing_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+
+ /* Move all inactive buffers out of the GTT. */
ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
- BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
-
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 82752d6..69b9a42 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -33,11 +33,23 @@
#define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \
- I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+ I915_INTERRUPT_ENABLE_VAR)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -59,6 +71,41 @@
}
}
+static inline u32
+i915_pipestat(int pipe)
+{
+ if (pipe == 0)
+ return PIPEASTAT;
+ if (pipe == 1)
+ return PIPEBSTAT;
+ BUG();
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != mask) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] |= mask;
+ /* Enable the interrupt, clear any pending status */
+ I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+ (void) I915_READ(reg);
+ }
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != 0) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] &= ~mask;
+ I915_WRITE(reg, dev_priv->pipestat[pipe]);
+ (void) I915_READ(reg);
+ }
+}
+
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
@@ -121,80 +168,102 @@
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
+ u32 vblank_status;
+ u32 vblank_enable;
int vblank = 0;
+ unsigned long irqflags;
+ int irq_received;
+ int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, ~0);
iir = I915_READ(IIR);
- if (iir == 0) {
- if (dev->pdev->msi_enabled) {
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IMR);
- }
- return IRQ_NONE;
+ if (IS_I965G(dev)) {
+ vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ } else {
+ vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+ for (;;) {
+ irq_received = iir != 0;
+
+ /* Can't rely on pipestat interrupt bit in iir as it might
+ * have been cleared after the pipestat interrupt was received.
+ * It doesn't set the bit in iir again, but it still produces
+ * interrupts (for non-MSI).
+ */
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
- pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ pipeb_stats = I915_READ(PIPEBSTAT);
+ /*
+ * Clear the PIPE(A|B)STAT regs before the IIR
+ */
+ if (pipea_stats & 0x8000ffff) {
+ I915_WRITE(PIPEASTAT, pipea_stats);
+ irq_received = 1;
+ }
+
+ if (pipeb_stats & 0x8000ffff) {
+ I915_WRITE(PIPEBSTAT, pipeb_stats);
+ irq_received = 1;
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+ if (!irq_received)
+ break;
+
+ ret = IRQ_HANDLED;
+
+ I915_WRITE(IIR, iir);
+ new_iir = I915_READ(IIR); /* Flush posted writes */
+
+ if (dev_priv->sarea_priv)
+ dev_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+
+ if (iir & I915_USER_INTERRUPT) {
+ dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
+ if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
- I915_WRITE(PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(PIPEBSTAT);
- /* Ack the event */
- I915_WRITE(PIPEBSTAT, pipeb_stats);
-
- /* The vblank interrupt gets enabled even if we didn't ask for
- it, so make sure it's shut down again */
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
- pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
- if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+ if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+ (iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
- I915_WRITE(PIPEBSTAT, pipeb_stats);
+
+ /* With MSI, interrupts are only generated when iir
+ * transitions from zero to nonzero. If another bit got
+ * set while we were handling the existing iir bits, then
+ * we would never get another interrupt.
+ *
+ * This is fine on non-MSI as well, as if we hit this path
+ * we avoid exiting the interrupt handler only to generate
+ * another one.
+ *
+ * Note that for MSI this could cause a stray interrupt report
+ * if an interrupt landed in the time between writing IIR and
+ * the posting read. This should be rare enough to never
+ * trigger the 99% of 100,000 interrupts test for disabling
+ * stray interrupts.
+ */
+ iir = new_iir;
}
- I915_WRITE(IIR, iir);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IIR); /* Flush posted writes */
-
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
-
- if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
- DRM_WAKEUP(&dev_priv->irq_queue);
- }
-
- if (iir & I915_ASLE_INTERRUPT)
- opregion_asle_intr(dev);
-
- return IRQ_HANDLED;
+ return ret;
}
static int i915_emit_irq(struct drm_device * dev)
@@ -330,48 +399,16 @@
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- return 0;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- /* Enabling vblank events in IMR comes before PIPESTAT write, or
- * there's a race where the PIPESTAT vblank bit gets set to 1, so
- * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
- * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
- * IMR masks it. It doesn't ever get set after we clear the masking
- * in IMR because the ISR bit is edge, not level-triggered, on the
- * OR of PIPESTAT bits.
- */
- i915_enable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
- pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
- pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
return 0;
}
@@ -381,37 +418,12 @@
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- return;
- break;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
- pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
@@ -476,32 +488,35 @@
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
+ (void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
-
- /* Set initial unmasked IRQs to just the selected vblank pipes. */
- dev_priv->irq_mask_reg = ~0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+ /* Unmask the interrupts that we always want on. */
+ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ /* Disable pipe interrupt enables, clear pending pipe status */
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ /* Clear pending interrupt status */
+ I915_WRITE(IIR, I915_READ(IIR));
+
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
@@ -513,7 +528,6 @@
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
if (!dev_priv)
return;
@@ -521,13 +535,12 @@
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
- temp = I915_READ(PIPEASTAT);
- I915_WRITE(PIPEASTAT, temp);
- temp = I915_READ(PIPEBSTAT);
- I915_WRITE(PIPEBSTAT, temp);
- temp = I915_READ(IIR);
- I915_WRITE(IIR, temp);
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ I915_WRITE(IIR, I915_READ(IIR));
}
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 1787a0c..13ae731 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -235,17 +235,15 @@
struct opregion_asle *asle = dev_priv->opregion.asle;
if (asle) {
- u32 pipeb_stats = I915_READ(PIPEBSTAT);
if (IS_MOBILE(dev)) {
- /* Many devices trigger events with a write to the
- legacy backlight controller, so we need to ensure
- that it's able to generate interrupts */
- I915_WRITE(PIPEBSTAT, pipeb_stats |=
- I915_LEGACY_BLC_EVENT_ENABLE);
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
- } else
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ i915_enable_pipestat(dev_priv, 1,
+ I915_LEGACY_BLC_EVENT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock,
+ irqflags);
+ }
asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
ASLE_PFMB_EN;
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5ddc6e5..5d84027 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -244,6 +244,9 @@
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
@@ -373,6 +376,9 @@
if (IS_I965G(dev) && IS_MOBILE(dev))
I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index c1d12db..b49c5ff 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -396,6 +396,7 @@
int mga_driver_load(struct drm_device * dev, unsigned long flags)
{
drm_mga_private_t *dev_priv;
+ int ret;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
@@ -415,6 +416,13 @@
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
+ ret = drm_vblank_init(dev, 1);
+
+ if (ret) {
+ (void) mga_driver_unload(dev);
+ return ret;
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c
index bab42f4..daa6041 100644
--- a/drivers/gpu/drm/mga/mga_irq.c
+++ b/drivers/gpu/drm/mga/mga_irq.c
@@ -152,11 +152,6 @@
int mga_driver_irq_postinstall(struct drm_device *dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c
index 3265d53..601f4c0 100644
--- a/drivers/gpu/drm/r128/r128_drv.c
+++ b/drivers/gpu/drm/r128/r128_drv.c
@@ -45,6 +45,7 @@
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
+ .load = r128_driver_load,
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
.get_vblank_counter = r128_get_vblank_counter,
@@ -84,6 +85,11 @@
.patchlevel = DRIVER_PATCHLEVEL,
};
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+ return drm_vblank_init(dev, 1);
+}
+
static int __init r128_init(void)
{
driver.num_ioctls = r128_max_ioctl;
diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h
index 5898b27..797a26c 100644
--- a/drivers/gpu/drm/r128/r128_drv.h
+++ b/drivers/gpu/drm/r128/r128_drv.h
@@ -159,6 +159,7 @@
extern int r128_driver_irq_postinstall(struct drm_device *dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
extern void r128_driver_preclose(struct drm_device * dev,
struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c
index d734901..69810fb 100644
--- a/drivers/gpu/drm/r128/r128_irq.c
+++ b/drivers/gpu/drm/r128/r128_irq.c
@@ -102,7 +102,7 @@
int r128_driver_irq_postinstall(struct drm_device *dev)
{
- return drm_vblank_init(dev, 1);
+ return 0;
}
void r128_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index abdc1ae..dcebb4b 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1757,6 +1757,12 @@
if (ret != 0)
return ret;
+ ret = drm_vblank_init(dev, 2);
+ if (ret) {
+ radeon_driver_unload(dev);
+ return ret;
+ }
+
DRM_DEBUG("%s card detected\n",
((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
return ret;
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 5079f70..97c0599 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -337,15 +337,10 @@
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
dev->max_vblank_count = 0x001fffff;
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 665d319..c248c1d 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -314,7 +314,6 @@
if (!dev_priv)
return -EINVAL;
- drm_vblank_init(dev, 1);
status = VIA_READ(VIA_REG_INTERRUPT);
VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
| dev_priv->irq_enable_mask);
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index a967556..2c4f0b4 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -107,8 +107,17 @@
ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
if (ret) {
drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+ return ret;
}
- return ret;
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ drm_sman_takedown(&dev_priv->sman);
+ drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+ return ret;
+ }
+
+ return 0;
}
int via_driver_unload(struct drm_device *dev)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 9b97795..aa28aed 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -400,12 +400,12 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
.driver_data = APPLE_HAS_FN },
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 147ec59..40df3e1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1241,9 +1241,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
@@ -1266,6 +1266,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
@@ -1420,7 +1423,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
@@ -1436,7 +1438,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) },
@@ -1576,9 +1577,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index d70075d..3928969 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -163,6 +163,7 @@
#define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
+#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c
index acd8155..46941f9 100644
--- a/drivers/hid/hid-pl.c
+++ b/drivers/hid/hid-pl.c
@@ -178,6 +178,8 @@
static const struct hid_device_id pl_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR),
.driver_data = 1 }, /* Twin USB Joystick */
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
+ .driver_data = 1 }, /* Twin USB Joystick */
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
{ }
};
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index d746bf8..606369e 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -796,7 +796,6 @@
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
- mutex_lock(&usbhid->setup);
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
@@ -876,7 +875,6 @@
hid_dump_device(hid);
set_bit(HID_STARTED, &usbhid->iofl);
- mutex_unlock(&usbhid->setup);
return 0;
@@ -888,7 +886,6 @@
usbhid->urbout = NULL;
usbhid->urbctrl = NULL;
hid_free_buffers(dev, hid);
- mutex_unlock(&usbhid->setup);
return ret;
}
@@ -899,7 +896,6 @@
if (WARN_ON(!usbhid))
return;
- mutex_lock(&usbhid->setup);
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
@@ -928,7 +924,6 @@
usbhid->urbout = NULL;
hid_free_buffers(hid_to_usb_dev(hid), hid);
- mutex_unlock(&usbhid->setup);
}
static struct hid_ll_driver usb_hid_driver = {
@@ -1016,7 +1011,6 @@
hid->driver_data = usbhid;
usbhid->hid = hid;
- mutex_init(&usbhid->setup); /* needed on suspend/resume */
ret = hid_add_device(hid);
if (ret) {
@@ -1051,18 +1045,14 @@
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
@@ -1073,16 +1063,12 @@
struct usbhid_device *usbhid = hid->driver_data;
int status;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid->retry_delay = 0;
status = hid_start_in(hid);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 55973ff..332abcd 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -74,7 +74,6 @@
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
- struct mutex setup;
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index f7dce8b..086c2a5 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -1564,3 +1564,4 @@
MODULE_AUTHOR("Nicolas Boichat");
MODULE_DESCRIPTION("Apple SMC");
MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(dmi, applesmc_whitelist);
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 59ba208..a257cd5 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -189,8 +189,6 @@
if (adapter_parm[type].init.val)
line_set(port, 1, &adapter_parm[type].init);
- parport_release(adapter->pdev);
-
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
goto ERROR1;
@@ -202,6 +200,7 @@
return;
ERROR1:
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
ERROR0:
kfree(adapter);
@@ -221,6 +220,7 @@
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 28902eb..e0d56ef 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
@@ -33,7 +34,10 @@
#include <linux/workqueue.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
+
#include <mach/usb.h>
+#include <mach/mux.h>
#ifndef DEBUG
@@ -88,14 +92,9 @@
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_MACH_OMAP_H2
-
/* board-specific PM hooks */
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
@@ -135,6 +134,33 @@
#endif
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
+#endif
+
/*-------------------------------------------------------------------------*/
static struct i2c_driver isp1301_driver;
@@ -334,8 +360,7 @@
* NOTE: guaranteeing certain response times might mean we shouldn't
* share keventd's work queue; a realtime task might be safest.
*/
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
{
int status;
@@ -512,7 +537,6 @@
otg_ctrl &= ~OTG_XCEIV_INPUTS;
otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
@@ -886,11 +910,11 @@
static int otg_remove(struct platform_device *dev)
{
- otg_dev = 0;
+ otg_dev = NULL;
return 0;
}
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
.probe = otg_probe,
.remove = otg_remove,
.driver = {
@@ -1212,6 +1236,8 @@
isp = dev_get_drvdata(dev);
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
@@ -1233,7 +1259,7 @@
otg_unbind(isp);
#endif
if (machine_is_omap_h2())
- omap_free_gpio(2);
+ gpio_free(2);
isp->timer.data = 0;
set_bit(WORK_STOP, &isp->todo);
@@ -1241,7 +1267,7 @@
flush_scheduled_work();
put_device(&i2c->dev);
- the_transceiver = 0;
+ the_transceiver = NULL;
return 0;
}
@@ -1295,7 +1321,7 @@
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = 0;
+ isp->otg.host = NULL;
return 0;
}
@@ -1344,7 +1370,9 @@
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
u32 l;
+#endif
if (!otg || isp != the_transceiver)
return -ENODEV;
@@ -1354,7 +1382,7 @@
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = 0;
+ isp->otg.gadget = NULL;
power_down(isp);
return 0;
}
@@ -1379,7 +1407,7 @@
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
- if (machine_is_omap_h2())
+ if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
@@ -1499,7 +1527,8 @@
/*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
@@ -1647,7 +1676,7 @@
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(0);
+ otg_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5a485c2..c6a63f4 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -631,7 +631,7 @@
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
- list_for_each_entry_safe(client, _n, &adap->clients, list) {
+ list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
driver = client->driver;
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 2d84801..81f70ca 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -419,7 +419,7 @@
hw->chipset = ide_acorn;
}
-static int __init
+static int __devinit
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
@@ -473,7 +473,7 @@
.swdma_mask = ATA_SWDMA2,
};
-static int __init
+static int __devinit
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c
index 918ffc4..272543a 100644
--- a/drivers/ieee1394/highlevel.c
+++ b/drivers/ieee1394/highlevel.c
@@ -46,10 +46,6 @@
static DEFINE_RWLOCK(addr_space_lock);
-/* addr_space list will have zero and max already included as bounds */
-static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL };
-static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr;
-
static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl,
struct hpsb_host *host)
@@ -481,20 +477,23 @@
return retval;
}
+static struct hpsb_address_ops dummy_ops;
+
+/* dummy address spaces as lower and upper bounds of the host's a.s. list */
static void init_hpsb_highlevel(struct hpsb_host *host)
{
- INIT_LIST_HEAD(&dummy_zero_addr.host_list);
- INIT_LIST_HEAD(&dummy_zero_addr.hl_list);
- INIT_LIST_HEAD(&dummy_max_addr.host_list);
- INIT_LIST_HEAD(&dummy_max_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.hl_list);
- dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops;
+ host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops;
- dummy_zero_addr.start = dummy_zero_addr.end = 0;
- dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48;
+ host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0;
+ host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48;
- list_add_tail(&dummy_zero_addr.host_list, &host->addr_space);
- list_add_tail(&dummy_max_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space);
}
void highlevel_add_host(struct hpsb_host *host)
diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h
index e4e8aeb..dd22995 100644
--- a/drivers/ieee1394/hosts.h
+++ b/drivers/ieee1394/hosts.h
@@ -13,6 +13,7 @@
#include "ieee1394_types.h"
#include "csr.h"
+#include "highlevel.h"
struct hpsb_packet;
struct hpsb_iso;
@@ -72,6 +73,9 @@
struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
struct csr_control csr;
+
+ struct hpsb_address_serve dummy_zero_addr;
+ struct hpsb_address_serve dummy_max_addr;
};
enum devctl_cmd {
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index c52f6e6..a373c18 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -402,6 +402,11 @@
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
+ .model_id = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
.model_id = 0x000023,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
@@ -890,12 +895,13 @@
return;
read_lock_irqsave(&sbp2_hi_logical_units_lock, flags);
+
list_for_each_entry(lu, &hi->logical_units, lu_list)
- if (likely(atomic_read(&lu->state) !=
- SBP2LU_STATE_IN_SHUTDOWN)) {
- atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
+ if (atomic_cmpxchg(&lu->state,
+ SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET)
+ == SBP2LU_STATE_RUNNING)
scsi_block_requests(lu->shost);
- }
+
read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags);
}
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 4df887a..7fc35cf 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -163,7 +163,8 @@
/* struct for tracking if cqes have been reported to the application */
struct ehca_qmap_entry {
u16 app_wr_id;
- u16 reported;
+ u8 reported;
+ u8 cqe_req;
};
struct ehca_queue_map {
@@ -171,6 +172,7 @@
unsigned int entries;
unsigned int tail;
unsigned int left_to_poll;
+ unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */
};
struct ehca_qp {
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index bb02a86..bec7e02 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -994,8 +994,7 @@
if (printk_timed_ratelimit(&ehca_dmem_warn_time,
30 * 1000))
ehca_gen_err("DMEM operations are not allowed"
- "as long as an ehca adapter is"
- "attached to the LPAR");
+ "in conjunction with eHCA");
return NOTIFY_BAD;
}
}
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 9e05ee2..cadbf0c 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -435,9 +435,13 @@
{
int i;
- qmap->tail = 0;
- for (i = 0; i < qmap->entries; i++)
+ qmap->tail = qmap->entries - 1;
+ qmap->left_to_poll = 0;
+ qmap->next_wqe_idx = 0;
+ for (i = 0; i < qmap->entries; i++) {
qmap->map[i].reported = 1;
+ qmap->map[i].cqe_req = 0;
+ }
}
/*
@@ -1121,6 +1125,7 @@
void *wqe_v;
u64 q_ofs;
u32 wqe_idx;
+ unsigned int tail_idx;
/* convert real to abs address */
wqe_p = wqe_p & (~(1UL << 63));
@@ -1133,12 +1138,17 @@
return -EFAULT;
}
+ tail_idx = (qmap->tail + 1) % qmap->entries;
wqe_idx = q_ofs / ipz_queue->qe_size;
- if (wqe_idx < qmap->tail)
- qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx;
- else
- qmap->left_to_poll = wqe_idx - qmap->tail;
+ /* check all processed wqes, whether a cqe is requested or not */
+ while (tail_idx != wqe_idx) {
+ if (qmap->map[tail_idx].cqe_req)
+ qmap->left_to_poll++;
+ tail_idx = (tail_idx + 1) % qmap->entries;
+ }
+ /* save index in queue, where we have to start flushing */
+ qmap->next_wqe_idx = wqe_idx;
return 0;
}
@@ -1185,10 +1195,14 @@
} else {
spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
my_qp->sq_map.left_to_poll = 0;
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
my_qp->rq_map.left_to_poll = 0;
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
}
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 6492807..00a648f 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -179,6 +179,7 @@
qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 0;
switch (send_wr->opcode) {
case IB_WR_SEND:
@@ -203,8 +204,10 @@
if ((send_wr->send_flags & IB_SEND_SIGNALED ||
qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR)
- && !hidden)
+ && !hidden) {
wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM;
+ qmap_entry->cqe_req = 1;
+ }
if (send_wr->opcode == IB_WR_SEND_WITH_IMM ||
send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
@@ -569,6 +572,7 @@
qmap_entry = &my_qp->rq_map.map[rq_map_idx];
qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 1;
wqe_cnt++;
} /* eof for cur_recv_wr */
@@ -706,19 +710,6 @@
goto repoll;
wc->qp = &my_qp->ib_qp;
- if (is_error) {
- /*
- * set left_to_poll to 0 because in error state, we will not
- * get any additional CQEs
- */
- ehca_add_to_err_list(my_qp, 1);
- my_qp->sq_map.left_to_poll = 0;
-
- if (HAS_RQ(my_qp))
- ehca_add_to_err_list(my_qp, 0);
- my_qp->rq_map.left_to_poll = 0;
- }
-
qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
/* We got a send completion. */
@@ -727,6 +718,26 @@
/* We got a receive completion. */
qmap = &my_qp->rq_map;
+ /* advance the tail pointer */
+ qmap->tail = qmap_tail_idx;
+
+ if (is_error) {
+ /*
+ * set left_to_poll to 0 because in error state, we will not
+ * get any additional CQEs
+ */
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
+ my_qp->sq_map.left_to_poll = 0;
+ ehca_add_to_err_list(my_qp, 1);
+
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
+ my_qp->rq_map.left_to_poll = 0;
+ if (HAS_RQ(my_qp))
+ ehca_add_to_err_list(my_qp, 0);
+ }
+
qmap_entry = &qmap->map[qmap_tail_idx];
if (qmap_entry->reported) {
ehca_warn(cq->device, "Double cqe on qp_num=%#x",
@@ -738,10 +749,6 @@
wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id);
qmap_entry->reported = 1;
- /* this is a proper completion, we need to advance the tail pointer */
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
-
/* if left_to_poll is decremented to 0, add the QP to the error list */
if (qmap->left_to_poll > 0) {
qmap->left_to_poll--;
@@ -805,13 +812,14 @@
else
qmap = &my_qp->rq_map;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
while ((nr < num_entries) && (qmap_entry->reported == 0)) {
/* generate flush CQE */
+
memset(wc, 0, sizeof(*wc));
- offset = qmap->tail * ipz_queue->qe_size;
+ offset = qmap->next_wqe_idx * ipz_queue->qe_size;
wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
if (!wqe) {
ehca_err(cq->device, "Invalid wqe offset=%#lx on "
@@ -850,11 +858,12 @@
wc->qp = &my_qp->ib_qp;
- /* mark as reported and advance tail pointer */
+ /* mark as reported and advance next_wqe pointer */
qmap_entry->reported = 1;
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap->next_wqe_idx++;
+ if (qmap->next_wqe_idx == qmap->entries)
+ qmap->next_wqe_idx = 0;
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
wc++; nr++;
}
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index d0866a3..1830849 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -343,6 +343,7 @@
{
struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
struct mlx4_ib_cq *cq = to_mcq(ibcq);
+ struct mlx4_mtt mtt;
int outst_cqe;
int err;
@@ -376,10 +377,13 @@
goto out;
}
+ mtt = cq->buf.mtt;
+
err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
if (err)
goto err_buf;
+ mlx4_mtt_cleanup(dev->dev, &mtt);
if (ibcq->uobject) {
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
@@ -406,6 +410,7 @@
goto out;
err_buf:
+ mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt);
if (!ibcq->uobject)
mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
cq->resize_buf->cqe);
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 6790e97..bc4e40f 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -397,8 +397,9 @@
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
+ unsigned long flags;
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
@@ -424,7 +425,7 @@
ml_play_effects(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irqrestore(&ml->timer_lock, flags);
return 0;
}
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 22016ca..379b7ff 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -824,7 +824,7 @@
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
- flush_scheduled_work();
+ cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
@@ -868,6 +868,22 @@
}
/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+ const unsigned int forced_release_keys[] = {
+ 0xae, 0xb0,
+ };
+ int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+ __set_bit(forced_release_keys[i],
+ atkbd->force_release_mask);
+}
+
+/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
*/
@@ -1468,6 +1484,15 @@
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
+ {
+ .ident = "Inventec Symphony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_fixup,
+ .driver_data = atkbd_inventec_keymap_fixup,
+ },
{ }
};
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index bce160f..86457fe 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -42,7 +42,7 @@
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
@@ -258,6 +258,37 @@
}
}
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x11: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x14: return KEY_NUMERIC_3; /* 3 */
+ case 0x21: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x24: return KEY_NUMERIC_6; /* 6 */
+ case 0x41: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x44: return KEY_NUMERIC_9; /* 9 */
+ case 0x84: return KEY_NUMERIC_POUND; /* # */
+ case 0x81: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* left arrow */
+ case 0x88: return KEY_RIGHT; /* right arrow */
+ default: return special_keymap(scancode);
+ }
+}
+
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
@@ -840,6 +871,10 @@
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else if (!strcasecmp(phone, "atcom")) {
+ keymap = keymap_atcom;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index e82d342..88f04bf 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -125,7 +125,7 @@
*/
static int hgpk_validate_byte(unsigned char *packet)
{
- return (packet[0] & 0x0C) == 0x08;
+ return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index eec375c..29e6863 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -337,6 +337,20 @@
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
+ {
+ .ident = "Dell XPS M1530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ .ident = "Compal HEL80I",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
{ }
};
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index ca62ec6..677680e 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -66,6 +66,7 @@
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
@@ -86,7 +87,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
@@ -103,15 +104,15 @@
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
- struct wacom_wac * wacom_wac;
+ struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
- struct wacom * wacom;
- struct urb * urb;
+ struct wacom *wacom;
+ struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
@@ -132,7 +133,7 @@
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
#endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 09e227a..484496d 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -14,8 +14,41 @@
#include "wacom.h"
#include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED 0x00
+#define HID_USAGE_PAGE 0x05
+#define HID_USAGE_PAGE_DIGITIZER 0x0d
+#define HID_USAGE_PAGE_DESKTOP 0x01
+#define HID_USAGE 0x09
+#define HID_USAGE_X 0x30
+#define HID_USAGE_Y 0x31
+#define HID_USAGE_X_TILT 0x3d
+#define HID_USAGE_Y_TILT 0x3e
+#define HID_USAGE_FINGER 0x22
+#define HID_USAGE_STYLUS 0x20
+#define HID_COLLECTION 0xc0
+
+enum {
+ WCM_UNDEFINED = 0,
+ WCM_DESKTOP,
+ WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
@@ -80,25 +113,21 @@
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
- return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
- return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
- return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
- return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
@@ -118,7 +147,6 @@
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
- return;
}
static int wacom_open(struct input_dev *dev)
@@ -160,7 +188,7 @@
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
@@ -170,7 +198,7 @@
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
@@ -178,7 +206,7 @@
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
@@ -188,7 +216,7 @@
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
@@ -196,14 +224,14 @@
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -211,7 +239,7 @@
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
@@ -228,8 +256,7 @@
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
- BIT_MASK(BTN_TOOL_RUBBER);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -237,15 +264,129 @@
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+ struct wacom_wac *wacom_wac)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct wacom_features *features = wacom_wac->features;
+ char limit = 0, result = 0;
+ int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ unsigned char *report;
+
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report)
+ return -ENOMEM;
+
+ /* retrive report descriptors */
+ do {
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ HID_DEVICET_REPORT << 8,
+ intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+ } while (result < 0 && limit++ < 5);
+
+ if (result < 0)
+ goto out;
+
+ for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+ switch (report[i]) {
+ case HID_USAGE_PAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_PAGE_DIGITIZER:
+ usage = WCM_DIGITIZER;
+ i++;
+ break;
+
+ case HID_USAGE_PAGE_DESKTOP:
+ usage = WCM_DESKTOP;
+ i++;
+ break;
+ }
+ break;
+
+ case HID_USAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_X:
+ if (usage == WCM_DESKTOP) {
+ if (finger) {
+ features->touch_x_max =
+ features->touch_y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 6]);
+ i += 7;
+ } else if (pen) {
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ }
+ } else if (usage == WCM_DIGITIZER) {
+ /* max pressure isn't reported
+ features->pressure_max = (unsigned short)
+ (report[i+4] << 8 | report[i + 3]);
+ */
+ features->pressure_max = 255;
+ i += 4;
+ }
+ break;
+
+ case HID_USAGE_Y:
+ if (usage == WCM_DESKTOP)
+ features->y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+
+ case HID_USAGE_FINGER:
+ finger = 1;
+ i++;
+ break;
+
+ case HID_USAGE_STYLUS:
+ pen = 1;
+ i++;
+ break;
+
+ case HID_USAGE_UNDEFINED:
+ if (usage == WCM_DESKTOP && finger) /* capacity */
+ features->pressure_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+ }
+ break;
+
+ case HID_COLLECTION:
+ /* reset UsagePage ans Finger */
+ finger = usage = 0;
+ break;
+ }
+ }
+
+ result = 0;
+
+ out:
+ kfree(report);
+ return result;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
+ struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
+ struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
@@ -268,8 +409,8 @@
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = get_wacom_feature(id);
- BUG_ON(wacom_wac->features->pktlen > 10);
+ wacom_wac->features = features = get_wacom_feature(id);
+ BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
@@ -282,18 +423,37 @@
input_dev->open = wacom_open;
input_dev->close = wacom_close;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+ if (wacom_wac->features->type == TABLETPC) {
+ if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+ if (usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc)) {
+ printk("wacom: can not retrive extra class descriptor\n");
+ goto fail2;
+ }
+ }
+ error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+ if (error)
+ goto fail2;
+ }
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ if (features->type == TABLETPC) {
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+ }
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
@@ -305,13 +465,22 @@
if (error)
goto fail3;
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
+ /*
+ * Ask the tablet to report tablet data if it is not a Tablet PC.
+ * Repeat until it succeeds
+ */
+ if (wacom_wac->features->type != TABLETPC) {
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ }
usb_set_intfdata(intf, wacom);
return 0;
@@ -333,7 +502,8 @@
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ usb_buffer_free(interface_to_usbdev(intf), 10,
+ wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index bf3d9a8..8dc8d1e 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -535,31 +535,147 @@
return 1;
}
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ char *data = wacom->data;
+ int prox = 0, pressure;
+ static int stylusInProx, touchInProx = 1, touchOut;
+ struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+ dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+ if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+ if (urb->actual_length == 5) { /* with touch */
+ prox = data[0] & 0x03;
+ } else { /* with capacity */
+ prox = data[1] & 0x03;
+ }
+
+ if (!stylusInProx) { /* stylus not in prox */
+ if (prox) {
+ if (touchInProx) {
+ wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+ wacom->id[0] = TOUCH_DEVICE_ID;
+ if (urb->actual_length != 5) {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_key(wcombo, BTN_TOUCH, 1);
+ }
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ touchOut = 1;
+ return 1;
+ }
+ } else {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (touchOut || !prox) { /* force touch out-prox */
+ wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (data[0] == 2) { /* Penabled */
+ prox = data[1] & 0x20;
+
+ touchInProx = 0;
+
+ wacom->id[0] = ERASER_DEVICE_ID;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (prox) { /* in prox */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[1] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+ /*
+ * was entered with stylus2 pressed
+ * report out proximity for previous tool
+ */
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+
+ /* set new tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ return 0;
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = wacom->features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, pressure);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ stylusInProx = prox;
+ wacom->tool[0] = prox;
+ return 1;
+ }
+ return 0;
+}
+
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
- return (wacom_penpartner_irq(wacom_wac, wcombo));
- break;
+ return wacom_penpartner_irq(wacom_wac, wcombo);
+
case PL:
- return (wacom_pl_irq(wacom_wac, wcombo));
- break;
+ return wacom_pl_irq(wacom_wac, wcombo);
+
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
- return (wacom_graphire_irq(wacom_wac, wcombo));
- break;
+ return wacom_graphire_irq(wacom_wac, wcombo);
+
case PTU:
- return (wacom_ptu_irq(wacom_wac, wcombo));
- break;
+ return wacom_ptu_irq(wacom_wac, wcombo);
+
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
- return (wacom_intuos_irq(wacom_wac, wcombo));
- break;
+ return wacom_intuos_irq(wacom_wac, wcombo);
+
+ case TABLETPC:
+ return wacom_tpc_irq(wacom_wac, wcombo);
+
default:
return 0;
}
@@ -586,13 +702,15 @@
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
+ /* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
+ case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
- break;
+ /* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
@@ -611,6 +729,7 @@
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
@@ -650,6 +769,10 @@
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
+ { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
+ { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
@@ -665,6 +788,7 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
@@ -704,18 +828,26 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
-const struct usb_device_id * get_device_table(void) {
- const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+ const struct usb_device_id *id_table = wacom_ids;
+
return id_table;
}
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
+
return wf;
}
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 3342bc0..f9c8b69 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -10,6 +10,7 @@
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
@@ -27,6 +28,7 @@
CINTIQ,
WACOM_BEE,
WACOM_MO,
+ TABLETPC,
MAX_TYPE
};
@@ -38,6 +40,8 @@
int pressure_max;
int distance_max;
int type;
+ int touch_x_max;
+ int touch_y_max;
};
struct wacom_wac {
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index d20689c..8f38c5e 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -262,7 +262,7 @@
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: %x02x, controller: 0x%02x\n",
+ "features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 3ab6362..928d2ed 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -323,7 +323,7 @@
{ "" }
};
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
.name = "vkbd",
.owner = THIS_MODULE,
.ids = xenkbd_ids,
@@ -342,12 +342,12 @@
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenkbd);
+ return xenbus_register_frontend(&xenkbd_driver);
}
static void __exit xenkbd_cleanup(void)
{
- xenbus_unregister_driver(&xenkbd);
+ xenbus_unregister_driver(&xenkbd_driver);
}
module_init(xenkbd_init);
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 84d75a3..ded9d0b 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1213,7 +1213,7 @@
memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
}
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
{
int foundcards = 0;
int i = 0;
@@ -1542,7 +1542,9 @@
printk(KERN_INFO "HiSax module removed\n");
}
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
{
u_char ids[16];
int ret = -1;
@@ -1563,6 +1565,8 @@
}
EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
EXPORT_SYMBOL(HiSax_closecard);
#include "hisax_if.h"
@@ -1580,6 +1584,11 @@
static void hisax_bh(struct work_struct *work);
static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+ return 2;
+}
+
int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
char *name, int protocol)
{
@@ -1599,7 +1608,8 @@
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner,
+ hisax_setup_card_dynamic);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 2c21d4f..a98ab72 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -288,7 +288,7 @@
cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
}
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
{
pr_debug("rackmeter: setting up i2s..\n");
rackmeter_setup_i2s(rm);
@@ -582,12 +582,12 @@
{ }
};
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
.name = "rackmeter",
.owner = THIS_MODULE,
.match_table = rackmeter_match,
.probe = rackmeter_probe,
- .remove = rackmeter_remove,
+ .remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
};
@@ -596,14 +596,14 @@
{
pr_debug("rackmeter_init()\n");
- return macio_register_driver(&rackmeter_drv);
+ return macio_register_driver(&rackmeter_driver);
}
static void __exit rackmeter_exit(void)
{
pr_debug("rackmeter_exit()\n");
- macio_unregister_driver(&rackmeter_drv);
+ macio_unregister_driver(&rackmeter_driver);
}
module_init(rackmeter_init);
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 14e627e..c1d92f8 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -376,7 +376,7 @@
pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr);
}
-static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
{
outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK));
outb(1, dm_io_mem(DM1105_CR));
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 8557bf1..7a421e9 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -585,6 +585,8 @@
if (fe->ops.set_voltage)
fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
if (fe->ops.tuner_ops.sleep) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.sleep(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
@@ -934,7 +936,8 @@
int is_legacy_delivery_system(fe_delivery_system_t s)
{
if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) ||
- (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS))
+ (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) ||
+ (s == SYS_ATSC))
return 1;
return 0;
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 847d8fd..e9ab024 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -681,12 +681,6 @@
goto error;
}
- /* firmware is running, reconnect device in the usb bus */
- req.cmd = RECONNECT_USB;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- err("reconnect failed: %d", ret);
-
error:
return ret;
}
@@ -1208,6 +1202,7 @@
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
@@ -1306,6 +1301,7 @@
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 7391939..8b544fe 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -22,7 +22,7 @@
#define REQUEST_I2C_READ 0x2
#define REQUEST_I2C_WRITE 0x3
-#define REQUEST_POLL_RC 0x4
+#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */
#define REQUEST_JUMPRAM 0x8
#define REQUEST_SET_CLOCK 0xB
#define REQUEST_SET_GPIO 0xC
@@ -40,11 +40,14 @@
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
+ u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
};
+extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype);
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index dd53cee..200b215 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -19,6 +19,22 @@
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype)
+{
+ u8 b[16];
+ int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ REQUEST_GET_VERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+ *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+ *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7];
+ *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+ return ret;
+}
+
/* expecting rx buffer: request data[0] data[1] ... data[2] */
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
{
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 0cfccc24..f28d3ae 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -38,6 +38,7 @@
}
};
+
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
@@ -451,8 +452,13 @@
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 2
+#define RC_REPEAT_DELAY_V1_20 5
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+ int *state)
{
u8 key[4];
int i;
@@ -529,6 +535,137 @@
return 0;
}
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u8 system_msb;
+ u8 system_lsb;
+ u8 data;
+ u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+ int *state)
+{
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ struct dib0700_state *st = d->priv;
+ struct dib0700_rc_response poll_reply;
+ u8 buf[6];
+ int i;
+ int status;
+ int actlen;
+ int found = 0;
+
+ /* Set initial results in case we exit the function early */
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ /* Firmware v1.20 provides RC data via bulk endpoint 1 */
+ status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+ sizeof(buf), &actlen, 50);
+ if (status < 0) {
+ /* No data available (meaning no key press) */
+ return 0;
+ }
+
+ if (actlen != sizeof(buf)) {
+ /* We didn't get back the 6 byte message we expected */
+ err("Unexpected RC response size [%d]", actlen);
+ return -1;
+ }
+
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system_msb = buf[2];
+ poll_reply.system_lsb = buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /*
+ info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ */
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ return -1;
+ }
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == poll_reply.system_lsb &&
+ keymap[i].data == poll_reply.data) {
+ *event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ return 0;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ *event = d->last_event;
+ *state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ struct dib0700_state *st = d->priv;
+
+ /* Because some people may have improperly named firmware files,
+ let's figure out whether to use the new firmware call or the legacy
+ call based on the firmware version embedded in the file */
+ if (st->rc_func_version == 0) {
+ u32 hwver, romver, ramver, fwtype;
+ int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+ &fwtype);
+ if (ret < 0) {
+ err("Could not determine version info");
+ return -1;
+ }
+ if (ramver < 0x10200)
+ st->rc_func_version = 1;
+ else
+ st->rc_func_version = 2;
+ }
+
+ if (st->rc_func_version == 2)
+ return dib0700_rc_query_v1_20(d, event, state);
+ else
+ return dib0700_rc_query_legacy(d, event, state);
+}
+
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
/* Key codes for the tiny Pinnacle remote*/
{ 0x07, 0x00, KEY_MUTE },
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index 397f51a..da93b9e 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -135,7 +135,7 @@
static int usb_bulk_urb_init(struct usb_data_stream *stream)
{
- int i;
+ int i, j;
if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
stream->props.u.bulk.buffersize)) < 0)
@@ -143,9 +143,13 @@
/* allocate the URBs */
for (i = 0; i < stream->props.count; i++) {
- if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL)
+ stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!.\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
-
+ }
usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
usb_rcvbulkpipe(stream->udev,stream->props.endpoint),
stream->buf_list[i],
@@ -170,9 +174,14 @@
for (i = 0; i < stream->props.count; i++) {
struct urb *urb;
int frame_offset = 0;
- if ((stream->urb_list[i] =
- usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL)
+
+ stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
+ }
urb = stream->urb_list[i];
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index 6f9b773..e98d6ca 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -95,7 +95,7 @@
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
- .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
+ .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
},
};
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 66ab0c6..4a3f2b8 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -808,6 +808,12 @@
ISO_BUF_COUNT,
&ttusb->iso_dma_handle);
+ if (!ttusb->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(ttusb->iso_buffer, 0,
ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT);
@@ -1659,7 +1665,14 @@
ttusb_setup_interfaces(ttusb);
- ttusb_alloc_iso_urbs(ttusb);
+ result = ttusb_alloc_iso_urbs(ttusb);
+ if (result < 0) {
+ dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__);
+ mutex_unlock(&ttusb->semi2c);
+ kfree(ttusb);
+ return result;
+ }
+
if (ttusb_init_controller(ttusb))
printk("ttusb_init_controller: error\n");
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index ab33fec..0aa96df 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1157,6 +1157,12 @@
ISO_BUF_COUNT),
&dec->iso_dma_handle);
+ if (!dec->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(dec->iso_buffer, 0,
ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT));
@@ -1254,6 +1260,7 @@
dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
GFP_ATOMIC, &dec->irq_dma_handle);
if(!dec->irq_buffer) {
+ usb_free_urb(dec->irq_urb);
return -ENOMEM;
}
usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe,
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index ac3292d..7a8d49e 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -62,7 +62,7 @@
dprintk("Stopping isoc\n");
for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
- usb_kill_urb(dev->adev->urb[i]);
+ usb_unlink_urb(dev->adev->urb[i]);
usb_free_urb(dev->adev->urb[i]);
dev->adev->urb[i] = NULL;
}
@@ -75,7 +75,6 @@
struct em28xx *dev = urb->context;
int i;
unsigned int oldptr;
- unsigned long flags;
int period_elapsed = 0;
int status;
unsigned char *cp;
@@ -96,9 +95,21 @@
if (!length)
continue;
- spin_lock_irqsave(&dev->adev->slock, flags);
-
oldptr = dev->adev->hwptr_done_capture;
+ if (oldptr + length >= runtime->buffer_size) {
+ unsigned int cnt =
+ runtime->buffer_size - oldptr;
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ cnt * stride);
+ memcpy(runtime->dma_area, cp + cnt * stride,
+ length * stride - cnt * stride);
+ } else {
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ length * stride);
+ }
+
+ snd_pcm_stream_lock(substream);
+
dev->adev->hwptr_done_capture += length;
if (dev->adev->hwptr_done_capture >=
runtime->buffer_size)
@@ -113,19 +124,7 @@
period_elapsed = 1;
}
- spin_unlock_irqrestore(&dev->adev->slock, flags);
-
- if (oldptr + length >= runtime->buffer_size) {
- unsigned int cnt =
- runtime->buffer_size - oldptr;
- memcpy(runtime->dma_area + oldptr * stride, cp,
- cnt * stride);
- memcpy(runtime->dma_area, cp + cnt * stride,
- length * stride - cnt * stride);
- } else {
- memcpy(runtime->dma_area + oldptr * stride, cp,
- length * stride);
- }
+ snd_pcm_stream_unlock(substream);
}
if (period_elapsed)
snd_pcm_period_elapsed(substream);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 5d837c1..15e2b52 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -69,19 +69,33 @@
int ret, byte;
if (dev->state & DEV_DISCONNECTED)
- return(-ENODEV);
+ return -ENODEV;
+
+ if (len > URB_MAX_CTRL_SIZE)
+ return -EINVAL;
em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ if (ret < 0) {
+ if (reg_debug)
+ printk(" failed!\n");
+ mutex_unlock(&dev->ctrl_urb_lock);
+ return ret;
+ }
+
+ if (len)
+ memcpy(buf, dev->urb_buf, len);
+
+ mutex_unlock(&dev->ctrl_urb_lock);
if (reg_debug) {
- printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+ printk("%02x values: ", ret);
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
-
printk("\n");
}
@@ -102,16 +116,20 @@
em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, &val, 1, HZ);
+ 0x0000, reg, dev->urb_buf, 1, HZ);
+ val = dev->urb_buf[0];
+ mutex_unlock(&dev->ctrl_urb_lock);
+
+ if (ret < 0) {
+ printk(" failed!\n");
+ return ret;
+ }
if (reg_debug)
- printk(ret < 0 ? " failed!\n" :
- "%02x\n", (unsigned char) val);
-
- if (ret < 0)
- return ret;
+ printk("%02x\n", (unsigned char) val);
return val;
}
@@ -130,19 +148,13 @@
{
int ret;
- /*usb_control_msg seems to expect a kmalloced buffer */
- unsigned char *bufs;
-
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
- if (len < 1)
+ if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
- bufs = kmalloc(len, GFP_KERNEL);
-
em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
if (reg_debug) {
int i;
for (i = 0; i < len; ++i)
@@ -150,16 +162,16 @@
printk("\n");
}
- if (!bufs)
- return -ENOMEM;
- memcpy(bufs, buf, len);
+ mutex_lock(&dev->ctrl_urb_lock);
+ memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, bufs, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ mutex_unlock(&dev->ctrl_urb_lock);
+
if (dev->wait_after_write)
msleep(dev->wait_after_write);
- kfree(bufs);
return ret;
}
@@ -270,6 +282,8 @@
break;
case EM28XX_AMUX_LINE_IN:
input = EM28XX_AUDIO_SRC_LINE;
+ video = disable;
+ line = enable;
break;
case EM28XX_AMUX_AC97_VIDEO:
input = EM28XX_AUDIO_SRC_LINE;
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 3bab56b..2360c61 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -337,9 +337,9 @@
/* Check if board has eeprom */
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (err < 0) {
- em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n",
- __func__, err);
- return err;
+ em28xx_errdev("board has no eeprom\n");
+ memset(eedata, 0, len);
+ return -ENODEV;
}
buf = 0;
@@ -609,14 +609,16 @@
dev->i2c_client.adapter = &dev->i2c_adap;
retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
- if (retval < 0) {
+ if ((retval < 0) && (retval != -ENODEV)) {
em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
+
return retval;
}
if (i2c_scan)
em28xx_do_i2c_scan(dev);
+
return 0;
}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a1ab2ef..610f535 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -73,6 +73,7 @@
MODULE_LICENSE("GPL");
static LIST_HEAD(em28xx_devlist);
+static DEFINE_MUTEX(em28xx_devlist_mutex);
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
@@ -1519,7 +1520,7 @@
struct em28xx_fh *fh;
enum v4l2_buf_type fh_type = 0;
- lock_kernel();
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(h, &em28xx_devlist, devlist) {
if (h->vdev->minor == minor) {
dev = h;
@@ -1535,10 +1536,11 @@
dev = h;
}
}
- if (NULL == dev) {
- unlock_kernel();
+ mutex_unlock(&em28xx_devlist_mutex);
+ if (NULL == dev)
return -ENODEV;
- }
+
+ mutex_lock(&dev->lock);
em28xx_videodbg("open minor=%d type=%s users=%d\n",
minor, v4l2_type_names[fh_type], dev->users);
@@ -1547,10 +1549,9 @@
fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
if (!fh) {
em28xx_errdev("em28xx-video.c: Out of memory?!\n");
- unlock_kernel();
+ mutex_unlock(&dev->lock);
return -ENOMEM;
}
- mutex_lock(&dev->lock);
fh->dev = dev;
fh->radio = radio;
fh->type = fh_type;
@@ -1584,7 +1585,6 @@
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
- unlock_kernel();
return errCode;
}
@@ -1871,6 +1871,7 @@
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
@@ -1879,6 +1880,7 @@
}
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
@@ -1887,6 +1889,7 @@
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
if (dev)
ops->fini(dev);
@@ -1896,6 +1899,7 @@
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
@@ -1921,6 +1925,60 @@
}
+static int register_analog_devices(struct em28xx *dev)
+{
+ int ret;
+
+ /* allocate and fill video video_device struct */
+ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
+ if (!dev->vdev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+
+ /* register v4l2 video video_device */
+ ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
+ video_nr[dev->devno]);
+ if (ret) {
+ em28xx_errdev("unable to register video device (error=%i).\n",
+ ret);
+ return ret;
+ }
+
+ /* Allocate and fill vbi video_device struct */
+ dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
+
+ /* register v4l2 vbi video_device */
+ ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+ vbi_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("unable to register vbi device\n");
+ return ret;
+ }
+
+ if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
+ dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+ if (!dev->radio_dev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+ ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
+ radio_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("can't register radio device\n");
+ return ret;
+ }
+ em28xx_info("Registered radio device as /dev/radio%d\n",
+ dev->radio_dev->num);
+ }
+
+ em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
+ dev->vdev->num, dev->vbi_dev->num);
+
+ return 0;
+}
+
+
/*
* em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
@@ -1936,6 +1994,7 @@
dev->udev = udev;
mutex_init(&dev->lock);
+ mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
init_waitqueue_head(&dev->open);
init_waitqueue_head(&dev->wait_frame);
@@ -1953,8 +2012,6 @@
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- em28xx_devused &= ~(1<<dev->devno);
- kfree(dev);
return -ENOMEM;
}
@@ -2001,50 +2058,6 @@
return errCode;
}
- list_add_tail(&dev->devlist, &em28xx_devlist);
-
- /* allocate and fill video video_device struct */
- dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
- if (NULL == dev->vdev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
-
- /* register v4l2 video video_device */
- retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
- video_nr[dev->devno]);
- if (retval) {
- em28xx_errdev("unable to register video device (error=%i).\n",
- retval);
- goto fail_unreg;
- }
-
- /* Allocate and fill vbi video_device struct */
- dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
- /* register v4l2 vbi video_device */
- if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
- vbi_nr[dev->devno]) < 0) {
- em28xx_errdev("unable to register vbi device\n");
- retval = -ENODEV;
- goto fail_unreg;
- }
-
- if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
- dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
- if (NULL == dev->radio_dev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
- retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
- radio_nr[dev->devno]);
- if (retval < 0) {
- em28xx_errdev("can't register radio device\n");
- goto fail_unreg;
- }
- em28xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->num);
- }
-
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
INIT_LIST_HEAD(&dev->vidq.queued);
@@ -2071,8 +2084,14 @@
video_mux(dev, 0);
- em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
- dev->vdev->num, dev->vbi_dev->num);
+ mutex_lock(&em28xx_devlist_mutex);
+ list_add_tail(&dev->devlist, &em28xx_devlist);
+ retval = register_analog_devices(dev);
+ if (retval < 0) {
+ em28xx_release_resources(dev);
+ mutex_unlock(&em28xx_devlist_mutex);
+ goto fail_reg_devices;
+ }
mutex_lock(&em28xx_extension_devlist_lock);
if (!list_empty(&em28xx_extension_devlist)) {
@@ -2082,13 +2101,12 @@
}
}
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
-fail_unreg:
- em28xx_release_resources(dev);
+fail_reg_devices:
mutex_unlock(&dev->lock);
- kfree(dev);
return retval;
}
@@ -2231,8 +2249,12 @@
/* allocate device struct */
retval = em28xx_init_dev(&dev, udev, nr);
- if (retval)
+ if (retval) {
+ em28xx_devused &= ~(1<<dev->devno);
+ kfree(dev);
+
return retval;
+ }
em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8278117..5956e9b 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -102,6 +102,9 @@
#define EM28XX_MIN_BUF 4
#define EM28XX_DEF_BUF 8
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
/* Params for validated field */
#define EM28XX_BOARD_NOT_VALIDATED 1
#define EM28XX_BOARD_VALIDATED 0
@@ -430,6 +433,7 @@
/* locks */
struct mutex lock;
+ struct mutex ctrl_urb_lock; /* protects urb_buf */
/* spinlock_t queue_lock; */
struct list_head inqueue, outqueue;
wait_queue_head_t open, wait_frame, wait_stream;
@@ -451,6 +455,8 @@
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */
+ char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
+
/* helper funcs that call usb_control_msg */
int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
char *buf, int len);
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index a9d51ba..de28354 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -846,10 +846,13 @@
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
+ if (!gspca_dev->present)
+ return;
reg_w_val(gspca_dev, 0x0000, 0x00);
reg_r(gspca_dev, 0x0002, 1);
reg_w_val(gspca_dev, 0x0053, 0x00);
diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c
index 65d3cbf..607942f 100644
--- a/drivers/media/video/gspca/finepix.c
+++ b/drivers/media/video/gspca/finepix.c
@@ -276,6 +276,12 @@
/* Stop the state machine */
if (dev->state != FPIX_NOP)
wait_for_completion(&dev->can_close);
+}
+
+/* called on streamoff with alt 0 and disconnect */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
usb_free_urb(dev->control_urb);
dev->control_urb = NULL;
@@ -385,6 +391,7 @@
error:
/* Free the ressources */
sd_stopN(gspca_dev);
+ sd_stop0(gspca_dev);
return ret;
}
@@ -425,6 +432,7 @@
.init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
+ .stop0 = sd_stop0,
};
/* -- device connect -- */
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index e48fbfc..748a87e 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -646,15 +646,14 @@
{
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
- if (gspca_dev->present) {
- if (gspca_dev->sd_desc->stopN)
- gspca_dev->sd_desc->stopN(gspca_dev);
- destroy_urbs(gspca_dev);
- gspca_set_alt0(gspca_dev);
- if (gspca_dev->sd_desc->stop0)
- gspca_dev->sd_desc->stop0(gspca_dev);
- PDEBUG(D_STREAM, "stream off OK");
- }
+ if (gspca_dev->present
+ && gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ PDEBUG(D_STREAM, "stream off OK");
}
static void gspca_set_default_mode(struct gspca_dev *gspca_dev)
@@ -863,7 +862,7 @@
int ret;
PDEBUG(D_STREAM, "%s open", current->comm);
- gspca_dev = (struct gspca_dev *) video_devdata(file);
+ gspca_dev = video_drvdata(file);
if (mutex_lock_interruptible(&gspca_dev->queue_lock))
return -ERESTARTSYS;
if (!gspca_dev->present) {
@@ -875,6 +874,13 @@
ret = -EBUSY;
goto out;
}
+
+ /* protect the subdriver against rmmod */
+ if (!try_module_get(gspca_dev->module)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
gspca_dev->users++;
/* one more user */
@@ -884,10 +890,10 @@
#ifdef GSPCA_DEBUG
/* activate the v4l2 debug */
if (gspca_debug & D_V4L2)
- gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG;
else
- gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG);
#endif
ret = 0;
@@ -921,6 +927,7 @@
gspca_dev->memory = GSPCA_MEMORY_NO;
}
file->private_data = NULL;
+ module_put(gspca_dev->module);
mutex_unlock(&gspca_dev->queue_lock);
PDEBUG(D_STREAM, "close done");
@@ -1748,11 +1755,6 @@
return ret;
}
-static void dev_release(struct video_device *vfd)
-{
- /* nothing */
-}
-
static struct file_operations dev_fops = {
.owner = THIS_MODULE,
.open = dev_open,
@@ -1800,7 +1802,7 @@
.name = "gspca main driver",
.fops = &dev_fops,
.ioctl_ops = &dev_ioctl_ops,
- .release = dev_release, /* mandatory */
+ .release = video_device_release,
.minor = -1,
};
@@ -1869,17 +1871,18 @@
init_waitqueue_head(&gspca_dev->wq);
/* init video stuff */
- memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
- gspca_dev->vdev.parent = &dev->dev;
- memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
- gspca_dev->vdev.fops = &gspca_dev->fops;
- gspca_dev->fops.owner = module; /* module protection */
+ gspca_dev->vdev = video_device_alloc();
+ memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template);
+ gspca_dev->vdev->parent = &dev->dev;
+ gspca_dev->module = module;
gspca_dev->present = 1;
- ret = video_register_device(&gspca_dev->vdev,
+ video_set_drvdata(gspca_dev->vdev, gspca_dev);
+ ret = video_register_device(gspca_dev->vdev,
VFL_TYPE_GRABBER,
video_nr);
if (ret < 0) {
err("video_register_device err %d", ret);
+ video_device_release(gspca_dev->vdev);
goto out;
}
@@ -1887,7 +1890,8 @@
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
- kref_put(&gspca_dev->kref, gspca_delete);
+ kfree(gspca_dev->usb_buf);
+ kfree(gspca_dev);
return ret;
}
EXPORT_SYMBOL(gspca_dev_probe);
@@ -1905,7 +1909,7 @@
usb_set_intfdata(intf, NULL);
/* We don't want people trying to open up the device */
- video_unregister_device(&gspca_dev->vdev);
+ video_unregister_device(gspca_dev->vdev);
gspca_dev->present = 0;
gspca_dev->streaming = 0;
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 1d9dc90..d25e8d69 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -97,7 +97,7 @@
cam_pkt_op pkt_scan;
/* optional operations */
cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
+ cam_v_op stop0; /* called on stream off & disconnect - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
@@ -120,8 +120,8 @@
};
struct gspca_dev {
- struct video_device vdev; /* !! must be the first item */
- struct file_operations fops;
+ struct video_device *vdev;
+ struct module *module; /* subdriver handling the device */
struct usb_device *dev;
struct kref kref;
struct file *capt_file; /* file doing video capture */
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index e5ff9a6..fbd45e2 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -749,10 +749,13 @@
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->sensor == SENSOR_PAC7302) {
reg_w(gspca_dev, 0xff, 0x01);
reg_w(gspca_dev, 0x78, 0x40);
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index b742f26..e29954c 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -2022,8 +2022,11 @@
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
}
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index b345749..895b9fe 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -742,8 +742,12 @@
reg_write(gspca_dev->dev, 0x02, 0x00, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
+
/* This maybe reset or power control */
reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
reg_write(gspca_dev->dev, 0x03, 0x01, 0x0);
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 020a03c..c3de4e4 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -766,10 +766,13 @@
}
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->chip_revision == Rev012A) {
reg_w_val(gspca_dev->dev, 0x8118, 0x29);
reg_w_val(gspca_dev->dev, 0x8114, 0x08);
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index be46d92..17af353 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -1633,10 +1633,13 @@
reg_w(dev, 0xa0, 0x09, 0xb003);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct usb_device *dev = gspca_dev->dev;
+ if (!gspca_dev->present)
+ return;
reg_w(dev, 0x89, 0xffff, 0xffff);
}
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 8b3101d..0befacf 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7336,10 +7336,13 @@
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
send_unknown(gspca_dev->dev, sd->sensor);
}
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 5272926..3c3f8cf 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -192,7 +192,7 @@
#define S2255_FW_FAILED 3
#define S2255_FW_DISCONNECTING 4
-#define S2255_FW_MARKER 0x22552f2f
+#define S2255_FW_MARKER cpu_to_le32(0x22552f2f)
/* 2255 read states */
#define S2255_READ_IDLE 0
#define S2255_READ_FRAME 1
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 7bcb810..571b211 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -1038,8 +1038,8 @@
goto outinput;
}
- if (!acpi_video_backlight_support()) {
- printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&handle))) {
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 7a4a26b..899766e 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -5318,6 +5318,7 @@
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
@@ -5440,8 +5441,8 @@
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- if ((level != TP_EC_FAN_AUTO) &&
- (level != TP_EC_FAN_FULLSPEED) &&
+ if (!(level & TP_EC_FAN_AUTO) &&
+ !(level & TP_EC_FAN_FULLSPEED) &&
((level < 0) || (level > 7)))
return -EINVAL;
@@ -6005,38 +6006,67 @@
static void fan_suspend(pm_message_t state)
{
+ int rc;
+
if (!fan_control_allowed)
return;
/* Store fan status in cache */
- fan_get_status_safe(NULL);
+ fan_control_resume_level = 0;
+ rc = fan_get_status_safe(&fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to read fan level for later "
+ "restore during resume: %d\n", rc);
+
+ /* if it is undefined, don't attempt to restore it.
+ * KEEP THIS LAST */
if (tp_features.fan_ctrl_status_undef)
- fan_control_desired_level = TP_EC_FAN_AUTO;
+ fan_control_resume_level = 0;
}
static void fan_resume(void)
{
- u8 saved_fan_level;
u8 current_level = 7;
bool do_set = false;
+ int rc;
/* DSDT *always* updates status on resume */
tp_features.fan_ctrl_status_undef = 0;
- saved_fan_level = fan_control_desired_level;
if (!fan_control_allowed ||
+ !fan_control_resume_level ||
(fan_get_status_safe(¤t_level) < 0))
return;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- do_set = (saved_fan_level > current_level);
+ /* never decrease fan level */
+ do_set = (fan_control_resume_level > current_level);
break;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
- (saved_fan_level == 7 &&
- !(current_level & TP_EC_FAN_FULLSPEED)));
+ /* never decrease fan level, scale is:
+ * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+ *
+ * We expect the firmware to set either 7 or AUTO, but we
+ * handle FULLSPEED out of paranoia.
+ *
+ * So, we can safely only restore FULLSPEED or 7, anything
+ * else could slow the fan. Restoring AUTO is useless, at
+ * best that's exactly what the DSDT already set (it is the
+ * slower it uses).
+ *
+ * Always keep in mind that the DSDT *will* have set the
+ * fans to what the vendor supposes is the best level. We
+ * muck with it only to speed the fan up.
+ */
+ if (fan_control_resume_level != 7 &&
+ !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+ return;
+ else
+ do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+ (current_level != fan_control_resume_level);
break;
default:
return;
@@ -6044,8 +6074,11 @@
if (do_set) {
printk(TPACPI_NOTICE
"restoring fan level to 0x%02x\n",
- saved_fan_level);
- fan_set_level_safe(saved_fan_level);
+ fan_control_resume_level);
+ rc = fan_set_level_safe(fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to restore fan level: %d\n", rc);
}
}
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index e04bcf1..d8966ba 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1022,7 +1022,7 @@
}
/*
- * OK, now the LEB is locked and we can safely start moving iy. Since
+ * OK, now the LEB is locked and we can safely start moving it. Since
* this function utilizes thie @ubi->peb1_buf buffer which is shared
* with some other functions, so lock the buffer by taking the
* @ubi->buf_mutex.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 4f2daa5..41d47e1 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -320,7 +320,7 @@
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS)
+ if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 05d7093..dcb6dac 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1396,7 +1396,8 @@
ubi_msg("%s: %d consecutive failures",
ubi->bgt_name, WL_MAX_FAILURES);
ubi_ro_mode(ubi);
- break;
+ ubi->thread_enabled = 0;
+ continue;
}
} else
failures = 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 11f143f..231eeaf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1825,9 +1825,10 @@
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+ depends on PPC_MPC52xx && PPC_BESTCOMM
select CRC32
select PHYLIB
+ select PPC_BESTCOMM_FEC
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 36f2bb6..8ed823a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2330,7 +2330,7 @@
* Once we know the feature-set enabled for the device, we'll cache
* the register offset the descriptor ring is assigned to.
**/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
{
int feature_mask = 0, rss_i;
int i, txr_idx, rxr_idx;
@@ -2367,7 +2367,7 @@
* number of queues at compile-time. The polling_netdev array is
* intended for Multiqueue, but should work fine with a single queue.
**/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
{
int i;
@@ -2408,8 +2408,7 @@
* Attempt to configure the interrupts using the best available
* capabilities of the hardware and the kernel.
**/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
- *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
{
int err = 0;
int vector, v_budget;
@@ -2501,7 +2500,7 @@
* - Hardware queue count (num_*_queues)
* - defined by miscellaneous hardware support/features (RSS, etc.)
**/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{
int err;
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 468921b8..90a0281 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -753,6 +753,7 @@
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
int port;
+ __be32 ib_port_default_caps;
err = mlx4_init_uar_table(dev);
if (err) {
@@ -852,6 +853,13 @@
}
for (port = 1; port <= dev->caps.num_ports; port++) {
+ ib_port_default_caps = 0;
+ err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
+ if (err)
+ mlx4_warn(dev, "failed to get port %d default "
+ "ib capabilities (%d). Continuing with "
+ "caps = 0\n", port, err);
+ dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 56a2e21..34c909d 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -385,5 +385,6 @@
void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps);
#endif /* MLX4_H */
diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c
index e2fdab4..0a057e5 100644
--- a/drivers/net/mlx4/port.c
+++ b/drivers/net/mlx4/port.c
@@ -258,6 +258,42 @@
}
EXPORT_SYMBOL_GPL(mlx4_unregister_vlan);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
+{
+ struct mlx4_cmd_mailbox *inmailbox, *outmailbox;
+ u8 *inbuf, *outbuf;
+ int err;
+
+ inmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inmailbox))
+ return PTR_ERR(inmailbox);
+
+ outmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outmailbox)) {
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ return PTR_ERR(outmailbox);
+ }
+
+ inbuf = inmailbox->buf;
+ outbuf = outmailbox->buf;
+ memset(inbuf, 0, 256);
+ memset(outbuf, 0, 256);
+ inbuf[0] = 1;
+ inbuf[1] = 1;
+ inbuf[2] = 1;
+ inbuf[3] = 1;
+ *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015);
+ *(__be32 *) (&inbuf[20]) = cpu_to_be32(port);
+
+ err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C);
+ if (!err)
+ *caps = *(__be32 *) (outbuf + 84);
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ mlx4_free_cmd_mailbox(dev, outmailbox);
+ return err;
+}
+
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
{
struct mlx4_cmd_mailbox *mailbox;
@@ -273,7 +309,8 @@
((u8 *) mailbox->buf)[3] = 6;
((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15);
((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15);
- }
+ } else
+ ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port];
err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT,
MLX4_CMD_TIME_CLASS_B);
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index cf3cca4..f51944b 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -349,7 +349,7 @@
return 0;
}
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index b185cd1..9a16a79 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1735,7 +1735,7 @@
* This routine has a simple purpose -- make the SMC chip generate an
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
*/
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int timeout = 20;
@@ -1799,7 +1799,7 @@
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int i, retval;
@@ -2048,7 +2048,7 @@
* 0 --> there is a device
* anything else, error
*/
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
{
#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
@@ -2124,7 +2124,7 @@
return ret;
}
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc911x_local *lp = netdev_priv(ndev);
@@ -2195,7 +2195,7 @@
static struct platform_driver smc911x_driver = {
.probe = smc911x_drv_probe,
- .remove = smc911x_drv_remove,
+ .remove = __devexit_p(smc911x_drv_remove),
.suspend = smc911x_drv_suspend,
.resume = smc911x_drv_resume,
.driver = {
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fc80f25..35c56ab 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1696,7 +1696,7 @@
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
{
void __iomem *ioaddr = lp->base;
int timeout = 20;
@@ -1770,7 +1770,7 @@
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
@@ -2126,7 +2126,7 @@
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
@@ -2240,7 +2240,7 @@
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
@@ -2305,7 +2305,7 @@
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __devexit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index c6948d8..6d017ad 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1785,7 +1785,7 @@
return 0;
}
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
.name = "vif",
.owner = THIS_MODULE,
.ids = netfront_ids,
@@ -1805,7 +1805,7 @@
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
- return xenbus_register_frontend(&netfront);
+ return xenbus_register_frontend(&netfront_driver);
}
module_init(netif_init);
@@ -1815,7 +1815,7 @@
if (xen_initial_domain())
return;
- xenbus_unregister_driver(&netfront);
+ xenbus_unregister_driver(&netfront_driver);
}
module_exit(netif_exit);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index e2e95b3..101ed49 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -70,6 +70,8 @@
* parallel ports and <S> is the number of serial ports.
*/
card->numports = (dev->subsystem_device & 0xf0) >> 4;
+ if (card->numports > ARRAY_SIZE(card->addr))
+ card->numports = ARRAY_SIZE(card->addr);
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 28af496b..061d1ee 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2042,7 +2042,7 @@
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a926c89..643a6b9 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -879,7 +879,7 @@
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
@@ -972,7 +972,7 @@
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int enum_timeout_flag = 0;
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 680661a..6395c78 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -467,7 +467,7 @@
device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
{
int rc = 0;
struct rio_mport *port;
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 218777b..399fe55 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -13872,8 +13872,10 @@
advansys_wide_free_mem(boardp);
free_irq(boardp->irq, shost);
err_free_dma:
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA)
free_dma(shost->dma_channel);
+#endif
err_free_proc:
kfree(boardp->prtbuf);
err_unmap:
@@ -13894,10 +13896,12 @@
ASC_DBG(1, "begin\n");
scsi_remove_host(shost);
free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA) {
ASC_DBG(1, "free_dma()\n");
free_dma(shost->dma_channel);
}
+#endif
if (ASC_NARROW_BOARD(board)) {
dma_unmap_single(board->dev,
board->dvc_var.asc_dvc_var.overrun_dma,
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index c387c15..fb247fd 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -588,7 +588,7 @@
.remove = gdth_pci_remove_one,
};
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
{
gdth_ha_str *ha = pci_get_drvdata(pdev);
@@ -600,7 +600,7 @@
pci_disable_device(pdev);
}
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ushort vendor = pdev->vendor;
@@ -853,7 +853,7 @@
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
@@ -1237,7 +1237,7 @@
/* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
ulong flags;
gdt2_dpram_str __iomem *dp2_ptr;
@@ -1553,7 +1553,7 @@
/* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
ushort cdev_cnt, i;
int ok;
@@ -4935,7 +4935,7 @@
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
gdth_ha_str **ha_out)
{
struct Scsi_Host *shp;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 6a3f8fb..3317148 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -286,8 +286,8 @@
static int ulite_request_port(struct uart_port *port)
{
- pr_debug("ulite console: port=%p; port->mapbase=%x\n",
- port, port->mapbase);
+ pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+ port, (unsigned long long) port->mapbase);
if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
dev_err(port->dev, "Memory region busy\n");
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 87b73e0..b02f25c 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -369,10 +369,23 @@
dma_rx_addr = t->rx_dma;
/*
- * check if buffers are already dma mapped, map them otherwise
+ * check if buffers are already dma mapped, map them otherwise:
+ * - first map the TX buffer, so cache data gets written to memory
+ * - then map the RX buffer, so that cache entries (with
+ * soon-to-be-stale data) get removed
* use rx buffer in place of tx if tx buffer was not provided
* use temp rx buffer (preallocated or realloc to fit) for rx dma
*/
+ if (t->tx_buf) {
+ if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
+ dma_tx_addr = dma_map_single(hw->dev,
+ (void *)t->tx_buf,
+ t->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(hw->dev, dma_tx_addr))
+ dev_err(hw->dev, "tx dma map error\n");
+ }
+ }
+
if (t->rx_buf) {
if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
dma_rx_addr = dma_map_single(hw->dev,
@@ -396,15 +409,8 @@
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_FROM_DEVICE);
}
- if (t->tx_buf) {
- if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
- dma_tx_addr = dma_map_single(hw->dev,
- (void *)t->tx_buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(hw->dev, dma_tx_addr))
- dev_err(hw->dev, "tx dma map error\n");
- }
- } else {
+
+ if (!t->tx_buf) {
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_BIDIRECTIONAL);
hw->tx = hw->rx;
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 0debe11..3b97803 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -142,6 +142,7 @@
unsigned rfalarm;
unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
unsigned recv_at_once;
+ int last_block = 0;
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
@@ -151,15 +152,17 @@
while (rb < t->len) {
if (t->len - rb > MPC52xx_PSC_BUFSIZE) {
rfalarm = MPC52xx_PSC_RFALARM;
+ last_block = 0;
} else {
send_at_once = t->len - sb;
rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb);
+ last_block = 1;
}
dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
for (; send_at_once; sb++, send_at_once--) {
/* set EOF flag before the last word is sent */
- if (send_at_once == 1)
+ if (send_at_once == 1 && last_block)
out_8(&psc->ircr2, 0x01);
if (tx_buf)
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 0b4db0c..269a55e 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -1456,7 +1456,7 @@
struct device *dev = &pdev->dev;
struct spi_imx_master *platform_info;
struct spi_master *master;
- struct driver_data *drv_data = NULL;
+ struct driver_data *drv_data;
struct resource *res;
int irq, status = 0;
@@ -1467,14 +1467,6 @@
goto err_no_pdata;
}
- drv_data->clk = clk_get(&pdev->dev, "perclk2");
- if (IS_ERR(drv_data->clk)) {
- dev_err(&pdev->dev, "probe - cannot get get\n");
- status = PTR_ERR(drv_data->clk);
- goto err_no_clk;
- }
- clk_enable(drv_data->clk);
-
/* Allocate master with space for drv_data */
master = spi_alloc_master(dev, sizeof(struct driver_data));
if (!master) {
@@ -1495,6 +1487,14 @@
drv_data->dummy_dma_buf = SPI_DUMMY_u32;
+ drv_data->clk = clk_get(&pdev->dev, "perclk2");
+ if (IS_ERR(drv_data->clk)) {
+ dev_err(&pdev->dev, "probe - cannot get clock\n");
+ status = PTR_ERR(drv_data->clk);
+ goto err_no_clk;
+ }
+ clk_enable(drv_data->clk);
+
/* Find and map resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -1630,12 +1630,13 @@
kfree(drv_data->ioarea);
err_no_iores:
+ clk_disable(drv_data->clk);
+ clk_put(drv_data->clk);
+
+err_no_clk:
spi_master_put(master);
err_no_pdata:
- clk_disable(drv_data->clk);
- clk_put(drv_data->clk);
-err_no_clk:
err_no_mem:
return status;
}
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index cc1f647..f2447a5 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -34,7 +34,7 @@
static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
{
- return spi->controller_data;
+ return spi_master_get_devdata(spi->master);
}
static inline void setsck(struct spi_device *dev, int on)
@@ -118,6 +118,7 @@
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
sp->bitbang.master->bus_num = info->bus_num;
+ sp->bitbang.master->num_chipselect = info->num_chipselect;
sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 89a4375..5d869c4 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -597,7 +597,9 @@
}
mutex_unlock(&device_list_lock);
- if (status != 0)
+ if (status == 0)
+ spi_set_drvdata(spi, spidev);
+ else
kfree(spidev);
return status;
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 1fe8b44..b3408ff 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2363,6 +2363,9 @@
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 091bb55..f3c6703 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1836,6 +1836,9 @@
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index da6e93c..2dbc0db 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -141,7 +141,11 @@
if (mach->gpio_vbus) {
int value = gpio_get_value(mach->gpio_vbus);
- return mach->gpio_vbus_inverted ? !value : value;
+
+ if (mach->gpio_vbus_inverted)
+ return !value;
+ else
+ return !!value;
}
if (mach->udc_is_connected)
return mach->udc_is_connected();
@@ -982,7 +986,7 @@
struct pxa25x_udc *udc;
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- udc->vbus = (is_active != 0);
+ udc->vbus = is_active;
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
return 0;
@@ -1399,12 +1403,8 @@
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa25x_udc *dev = _dev;
- int vbus = gpio_get_value(dev->mach->gpio_vbus);
- if (dev->mach->gpio_vbus_inverted)
- vbus = !vbus;
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
return IRQ_HANDLED;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 9d0ea57..36864f9 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -169,18 +169,21 @@
}
break;
case PCI_VENDOR_ID_ATI:
- /* SB700 old version has a bug in EHCI controller,
+ /* SB600 and old version of SB700 have a bug in EHCI controller,
* which causes usb devices lose response in some cases.
*/
- if (pdev->device == 0x4396) {
+ if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
if (!p_smbus)
break;
rev = p_smbus->revision;
- if ((rev == 0x3a) || (rev == 0x3b)) {
+ if ((pdev->device == 0x4386) || (rev == 0x3a)
+ || (rev == 0x3b)) {
u8 tmp;
+ ehci_info(ehci, "applying AMD SB600/SB700 USB "
+ "freeze workaround\n");
pci_read_config_byte(pdev, 0x53, &tmp);
pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index b11798d..c7d4b5a 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -183,16 +183,14 @@
* the async ring; just the I/O watchdog. Note that if a
* SHRINK were pending, OFF would never be requested.
*/
- enum ehci_timer_action oldactions = ehci->actions;
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
- if (timer_pending(&ehci->watchdog)
- && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
- & oldactions))
- return;
-
switch (action) {
case TIMER_IO_WATCHDOG:
t = EHCI_IO_JIFFIES;
@@ -208,7 +206,7 @@
t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
break;
}
- mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 5b20de1..5b95009 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -135,6 +135,7 @@
err("no more memory");
goto reset_open_count;
}
+ kref_init(&tty->kref);
termios = kzalloc(sizeof(*termios), GFP_KERNEL);
if (!termios) {
retval = -ENOMEM;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6fa1ec4..809697b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -224,6 +224,7 @@
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
+#define ONDA_PRODUCT_MT503HS 0x0200
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
@@ -413,6 +414,40 @@
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6da9a7a..e61f2bf 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -318,6 +318,18 @@
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "GPS",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/*
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
* Reported by Pete Zaitcev <zaitcev@redhat.com>
@@ -377,6 +389,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
+UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200,
+ "NIKON",
+ "NIKON DSC D2H",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
"NIKON",
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 8718f73..a547e5d 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -174,12 +174,12 @@
const struct fb_image *image,
u32 fg, u32 bg)
{
- unsigned int src_bytes, dwords;
+ unsigned int dwords;
u32 *bits;
radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
+ GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE |
GMC_SRC_DATATYPE_MONO_FG_BG |
ROP3_S |
GMC_BYTE_ORDER_MSB_TO_LSB |
@@ -189,9 +189,6 @@
radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
/* Ensure the dst cache is flushed and the engine idle before
* issuing the operation.
*
@@ -205,13 +202,19 @@
/* X here pads width to a multiple of 32 and uses the clipper to
* adjust the result. Is that really necessary ? Things seem to
- * work ok for me without that and the doco doesn't seem to imply
+ * work ok for me without that and the doco doesn't seem to imply]
* there is such a restriction.
*/
- OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height);
+ radeon_fifo_wait(rinfo, 4);
+ OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx);
+ OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) |
+ (image->dx + image->width));
+ OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
- src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
- dwords = (src_bytes + 3) / 4;
+ OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31));
+
+ dwords = (image->width + 31) >> 5;
+ dwords *= image->height;
bits = (u32*)(image->data);
while(dwords >= 8) {
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 9a5821c..b3ffe82 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -1875,6 +1875,7 @@
info->fbops = &radeonfb_ops;
info->screen_base = rinfo->fb_base;
info->screen_size = rinfo->mapped_vram;
+
/* Fill fix common fields */
strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
info->fix.smem_start = rinfo->fb_base_phys;
@@ -1889,8 +1890,25 @@
info->fix.mmio_len = RADEON_REGSIZE;
info->fix.accel = FB_ACCEL_ATI_RADEON;
+ /* Allocate colormap */
fb_alloc_cmap(&info->cmap, 256, 0);
+ /* Setup pixmap used for acceleration */
+#define PIXMAP_SIZE (2048 * 4)
+
+ info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
+ if (!info->pixmap.addr) {
+ printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n");
+ noaccel = 1;
+ goto bail;
+ }
+ info->pixmap.size = PIXMAP_SIZE;
+ info->pixmap.flags = FB_PIXMAP_SYSTEM;
+ info->pixmap.scan_align = 4;
+ info->pixmap.buf_align = 4;
+ info->pixmap.access_align = 32;
+
+bail:
if (noaccel)
info->flags |= FBINFO_HWACCEL_DISABLED;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index b92947d..67ff370 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2389,16 +2389,13 @@
if (!fbcon_is_inactive(vc, info)) {
if (ops->blank_state != blank) {
- int ret = 1;
-
ops->blank_state = blank;
fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
ops->cursor_flash = (!blank);
- if (info->fbops->fb_blank)
- ret = info->fbops->fb_blank(blank, info);
- if (ret)
- fbcon_generic_blank(vc, info, blank);
+ if (!(info->flags & FBINFO_MISC_USEREVENT))
+ if (fb_blank(info, blank))
+ fbcon_generic_blank(vc, info, blank);
}
if (!blank)
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 99da8b6..ed13889 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,7 +23,6 @@
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
deleted file mode 100644
index e55de20..0000000
--- a/drivers/video/omap/lcd_sx1.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT 0xfffce000
-#define GPIO_DATA_OUTPUT 0xfffce004
-#define GPIO_DIR_CONTROL 0xfffce008
-#define GPIO_INT_CONTROL 0xfffce00c
-#define GPIO_INT_MASK 0xfffce010
-#define GPIO_INT_STATUS 0xfffce014
-#define GPIO_PIN_CONTROL 0xfffce018
-
-
-#define A_LCD_SSC_RD 3
-#define A_LCD_SSC_SD 7
-#define _A_LCD_RESET 9
-#define _A_LCD_SSC_CS 12
-#define _A_LCD_SSC_A0 13
-
-#define DSP_REG 0xE1017024
-
-const unsigned char INIT_1[12] = {
- 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
- 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
- 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
- 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
- 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
- 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
- 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
- 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
- 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
- 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
- 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
- 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
- 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
- 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
- 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
- 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
- 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
- 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
- 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
- int i, shifter = 0x80;
-
- if (!flag)
- gpio_set_value(_A_LCD_SSC_A0, 0);
- mdelay(2);
- gpio_set_value(A_LCD_SSC_RD, 1);
-
- gpio_set_value(A_LCD_SSC_SD, flag);
-
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- for (i = 0; i < 8; i++) {
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- gpio_set_value(A_LCD_SSC_SD, shifter & byte);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- shifter >>= 1;
- }
- gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
- omap_mcbsp_request(OMAP_MCBSP3);
- omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
- /* new wave */
- gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
- gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
- gpio_request(_A_LCD_RESET, "lcd_reset");
- gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
- gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
- /* set GPIOs to output, with initial data */
- gpio_direction_output(A_LCD_SSC_RD, 1);
- gpio_direction_output(A_LCD_SSC_SD, 0);
- gpio_direction_output(_A_LCD_RESET, 0);
- gpio_direction_output(_A_LCD_SSC_CS, 1);
- gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
- int i;
-
- omap_cfg_reg(MCBSP3_CLKX);
-
- mdelay(2);
- setup_GPIO();
- mdelay(2);
-
- /* reset LCD */
- gpio_set_value(A_LCD_SSC_SD, 1);
- epson_sendbyte(0, 0x25);
-
- gpio_set_value(_A_LCD_RESET, 0);
- mdelay(10);
- gpio_set_value(_A_LCD_RESET, 1);
-
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(2);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD, phase 1 */
- epson_sendbyte(0, 0xCA);
- for (i = 0; i < 10; i++)
- epson_sendbyte(1, INIT_1[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2 */
- epson_sendbyte(0, 0xCB);
- for (i = 0; i < 125; i++)
- epson_sendbyte(1, INIT_2[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2a */
- epson_sendbyte(0, 0xCC);
- for (i = 0; i < 14; i++)
- epson_sendbyte(1, INIT_3[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 3 */
- epson_sendbyte(0, 0xBC);
- epson_sendbyte(1, 0x08);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 4 */
- epson_sendbyte(0, 0x07);
- epson_sendbyte(1, 0x05);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 5 */
- epson_sendbyte(0, 0x94);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 6 */
- epson_sendbyte(0, 0xC6);
- epson_sendbyte(1, 0x80);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100); /* used to be 1000 */
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 7 */
- epson_sendbyte(0, 0x16);
- epson_sendbyte(1, 0x02);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xB1);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 8 */
- epson_sendbyte(0, 0x76);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xDB);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 9 */
- epson_sendbyte(0, 0xAF);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "SX1: LCD panel disable\n");
- sx1_setmmipower(0);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-
- epson_sendbyte(0, 0x25);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0xAE);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0x95);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
- init_system();
- display_init();
-
- sx1_setmmipower(1);
- sx1_setbacklight(0x18);
- sx1_setkeylight (0x06);
- return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel sx1_panel = {
- .name = "sx1",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
- OMAP_LCDC_INV_OUTPUT_EN,
-
- .x_res = 176,
- .y_res = 220,
- .data_lines = 16,
- .bpp = 16,
- .hsw = 5,
- .hfp = 5,
- .hbp = 5,
- .vsw = 2,
- .vfp = 1,
- .vbp = 1,
- .pixel_clock = 1500,
-
- .init = sx1_panel_init,
- .cleanup = sx1_panel_cleanup,
- .enable = sx1_panel_enable,
- .disable = sx1_panel_disable,
- .get_caps = sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&sx1_panel);
- return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
- .probe = sx1_panel_probe,
- .remove = sx1_panel_remove,
- .suspend = sx1_panel_suspend,
- .resume = sx1_panel_resume,
- .driver = {
- .name = "lcd_sx1",
- .owner = THIS_MODULE,
- },
-};
-
-static int sx1_panel_drv_init(void)
-{
- return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index a463b3d..2493f05 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -668,7 +668,7 @@
{ "" }
};
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
.name = "vfb",
.owner = THIS_MODULE,
.ids = xenfb_ids,
@@ -687,12 +687,12 @@
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenfb);
+ return xenbus_register_frontend(&xenfb_driver);
}
static void __exit xenfb_cleanup(void)
{
- xenbus_unregister_driver(&xenfb);
+ xenbus_unregister_driver(&xenfb_driver);
}
module_init(xenfb_init);
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 5da3d24..40a3a2a 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -298,8 +298,9 @@
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+ dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+ (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+ fbsize);
return 0; /* success */
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index a14d5b6..9061682 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,7 +36,7 @@
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && ARM
+ depends on W1 && ARM && HAVE_CLK
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/fs/buffer.c b/fs/buffer.c
index 6569fda..10179cf 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -878,6 +878,7 @@
spin_unlock(&buffer_mapping->private_lock);
}
}
+EXPORT_SYMBOL(invalidate_inode_buffers);
/*
* Remove any clean buffers from the inode's buffer list. This is called
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index b691b89..f0a81e6 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1475,7 +1475,11 @@
cFYI(1, ("write_end for page %p from pos %lld with %d bytes",
page, pos, copied));
- if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
+ if (PageChecked(page)) {
+ if (copied == len)
+ SetPageUptodate(page);
+ ClearPageChecked(page);
+ } else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
SetPageUptodate(page);
if (!PageUptodate(page)) {
@@ -2062,39 +2066,70 @@
{
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
loff_t offset = pos & (PAGE_CACHE_SIZE - 1);
+ loff_t page_start = pos & PAGE_MASK;
+ loff_t i_size;
+ struct page *page;
+ int rc = 0;
cFYI(1, ("write_begin from %lld len %d", (long long)pos, len));
- *pagep = __grab_cache_page(mapping, index);
- if (!*pagep)
- return -ENOMEM;
+ page = __grab_cache_page(mapping, index);
+ if (!page) {
+ rc = -ENOMEM;
+ goto out;
+ }
- if (PageUptodate(*pagep))
- return 0;
+ if (PageUptodate(page))
+ goto out;
- /* If we are writing a full page it will be up to date,
- no need to read from the server */
- if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE)
- return 0;
+ /*
+ * If we write a full page it will be up to date, no need to read from
+ * the server. If the write is short, we'll end up doing a sync write
+ * instead.
+ */
+ if (len == PAGE_CACHE_SIZE)
+ goto out;
+
+ /*
+ * optimize away the read when we have an oplock, and we're not
+ * expecting to use any of the data we'd be reading in. That
+ * is, when the page lies beyond the EOF, or straddles the EOF
+ * and the write will cover all of the existing data.
+ */
+ if (CIFS_I(mapping->host)->clientCanCacheRead) {
+ i_size = i_size_read(mapping->host);
+ if (page_start >= i_size ||
+ (offset == 0 && (pos + len) >= i_size)) {
+ zero_user_segments(page, 0, offset,
+ offset + len,
+ PAGE_CACHE_SIZE);
+ /*
+ * PageChecked means that the parts of the page
+ * to which we're not writing are considered up
+ * to date. Once the data is copied to the
+ * page, it can be set uptodate.
+ */
+ SetPageChecked(page);
+ goto out;
+ }
+ }
if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
- int rc;
-
- /* might as well read a page, it is fast enough */
- rc = cifs_readpage_worker(file, *pagep, &offset);
-
- /* we do not need to pass errors back
- e.g. if we do not have read access to the file
- because cifs_write_end will attempt synchronous writes
- -- shaggy */
+ /*
+ * might as well read a page, it is fast enough. If we get
+ * an error, we don't need to return it. cifs_write_end will
+ * do a sync write instead since PG_uptodate isn't set.
+ */
+ cifs_readpage_worker(file, page, &page_start);
} else {
/* we could try using another file handle if there is one -
but how would we lock it to prevent close of that handle
racing with this read? In any case
this will be written out by write_end so is fine */
}
-
- return 0;
+out:
+ *pagep = page;
+ return rc;
}
const struct address_space_operations cifs_addr_ops = {
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index aec5c13f..96355d5 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -102,6 +102,8 @@
#define EP_UNACTIVE_PTR ((void *) -1L)
+#define EP_ITEM_COST (sizeof(struct epitem) + sizeof(struct eppoll_entry))
+
struct epoll_filefd {
struct file *file;
int fd;
@@ -200,6 +202,9 @@
* holding ->lock.
*/
struct epitem *ovflist;
+
+ /* The user that created the eventpoll descriptor */
+ struct user_struct *user;
};
/* Wait structure used by the poll hooks */
@@ -227,9 +232,17 @@
};
/*
+ * Configuration options available inside /proc/sys/fs/epoll/
+ */
+/* Maximum number of epoll devices, per user */
+static int max_user_instances __read_mostly;
+/* Maximum number of epoll watched descriptors, per user */
+static int max_user_watches __read_mostly;
+
+/*
* This mutex is used to serialize ep_free() and eventpoll_release_file().
*/
-static struct mutex epmutex;
+static DEFINE_MUTEX(epmutex);
/* Safe wake up implementation */
static struct poll_safewake psw;
@@ -240,6 +253,33 @@
/* Slab cache used to allocate "struct eppoll_entry" */
static struct kmem_cache *pwq_cache __read_mostly;
+#ifdef CONFIG_SYSCTL
+
+#include <linux/sysctl.h>
+
+static int zero;
+
+ctl_table epoll_table[] = {
+ {
+ .procname = "max_user_instances",
+ .data = &max_user_instances,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ {
+ .procname = "max_user_watches",
+ .data = &max_user_watches,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ { .ctl_name = 0 }
+};
+#endif /* CONFIG_SYSCTL */
+
/* Setup the structure that is used as key for the RB tree */
static inline void ep_set_ffd(struct epoll_filefd *ffd,
@@ -402,6 +442,8 @@
/* At this point it is safe to free the eventpoll item */
kmem_cache_free(epi_cache, epi);
+ atomic_dec(&ep->user->epoll_watches);
+
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n",
current, ep, file));
@@ -449,6 +491,8 @@
mutex_unlock(&epmutex);
mutex_destroy(&ep->mtx);
+ atomic_dec(&ep->user->epoll_devs);
+ free_uid(ep->user);
kfree(ep);
}
@@ -532,10 +576,19 @@
static int ep_alloc(struct eventpoll **pep)
{
- struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ int error;
+ struct user_struct *user;
+ struct eventpoll *ep;
- if (!ep)
- return -ENOMEM;
+ user = get_current_user();
+ error = -EMFILE;
+ if (unlikely(atomic_read(&user->epoll_devs) >=
+ max_user_instances))
+ goto free_uid;
+ error = -ENOMEM;
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (unlikely(!ep))
+ goto free_uid;
spin_lock_init(&ep->lock);
mutex_init(&ep->mtx);
@@ -544,12 +597,17 @@
INIT_LIST_HEAD(&ep->rdllist);
ep->rbr = RB_ROOT;
ep->ovflist = EP_UNACTIVE_PTR;
+ ep->user = user;
*pep = ep;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
current, ep));
return 0;
+
+free_uid:
+ free_uid(user);
+ return error;
}
/*
@@ -703,9 +761,11 @@
struct epitem *epi;
struct ep_pqueue epq;
- error = -ENOMEM;
+ if (unlikely(atomic_read(&ep->user->epoll_watches) >=
+ max_user_watches))
+ return -ENOSPC;
if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
- goto error_return;
+ return -ENOMEM;
/* Item initialization follow here ... */
INIT_LIST_HEAD(&epi->rdllink);
@@ -735,6 +795,7 @@
* install process. Namely an allocation for a wait queue failed due
* high memory pressure.
*/
+ error = -ENOMEM;
if (epi->nwait < 0)
goto error_unregister;
@@ -765,6 +826,8 @@
spin_unlock_irqrestore(&ep->lock, flags);
+ atomic_inc(&ep->user->epoll_watches);
+
/* We have to call this outside the lock */
if (pwake)
ep_poll_safewake(&psw, &ep->poll_wait);
@@ -789,7 +852,7 @@
spin_unlock_irqrestore(&ep->lock, flags);
kmem_cache_free(epi_cache, epi);
-error_return:
+
return error;
}
@@ -1078,6 +1141,7 @@
flags & O_CLOEXEC);
if (fd < 0)
ep_free(ep);
+ atomic_inc(&ep->user->epoll_devs);
error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
@@ -1299,7 +1363,12 @@
static int __init eventpoll_init(void)
{
- mutex_init(&epmutex);
+ struct sysinfo si;
+
+ si_meminfo(&si);
+ max_user_instances = 128;
+ max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+ EP_ITEM_COST;
/* Initialize the structure used to perform safe poll wait head wake ups */
ep_poll_safewake_init(&psw);
diff --git a/fs/ntfs/debug.h b/fs/ntfs/debug.h
index 5e6724c..2142b1c 100644
--- a/fs/ntfs/debug.h
+++ b/fs/ntfs/debug.h
@@ -30,7 +30,8 @@
extern int debug_msgs;
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+extern void __ntfs_debug(const char *file, int line, const char *function,
+ const char *format, ...) __attribute__ ((format (printf, 4, 5)));
/**
* ntfs_debug - write a debug level message to syslog
* @f: a printf format string containing the message
@@ -39,11 +40,6 @@
* ntfs_debug() writes a DEBUG level message to the syslog but only if the
* driver was compiled with -DDEBUG. Otherwise, the call turns into a NOP.
*/
-static void ntfs_debug(const char *f, ...);
-#endif
-
-extern void __ntfs_debug (const char *file, int line, const char *function,
- const char *format, ...) __attribute__ ((format (printf, 4, 5)));
#define ntfs_debug(f, a...) \
__ntfs_debug(__FILE__, __LINE__, __func__, f, ##a)
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index 7e947c6..3a178ec 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -112,7 +112,7 @@
bh = bhs[i];
if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
+ mlog(ML_BH_IO,
"trying to sync read a jbd "
"managed bh (blocknr = %llu), skipping\n",
(unsigned long long)bh->b_blocknr);
@@ -147,15 +147,10 @@
for (i = nr; i > 0; i--) {
bh = bhs[i - 1];
- if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
- "the journal got the buffer while it was "
- "locked for io! (blocknr = %llu)\n",
- (unsigned long long)bh->b_blocknr);
- BUG();
- }
+ /* No need to wait on the buffer if it's managed by JBD. */
+ if (!buffer_jbd(bh))
+ wait_on_buffer(bh);
- wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
/* Status won't be cleared from here on out,
* so we can safely record this and loop back
@@ -251,8 +246,6 @@
ignore_cache = 1;
}
- /* XXX: Can we ever get this and *not* have the cached
- * flag set? */
if (buffer_jbd(bh)) {
if (ignore_cache)
mlog(ML_BH_IO, "trying to sync read a jbd "
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index 533a789..ba962d7 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -608,8 +608,10 @@
0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
dlmfs_init_once);
- if (!dlmfs_inode_cache)
+ if (!dlmfs_inode_cache) {
+ status = -ENOMEM;
goto bail;
+ }
cleanup_inode = 1;
user_dlm_worker = create_singlethread_workqueue("user_dlm");
diff --git a/fs/ocfs2/dlm/userdlm.h b/fs/ocfs2/dlm/userdlm.h
index 39ec277..0c3cc03 100644
--- a/fs/ocfs2/dlm/userdlm.h
+++ b/fs/ocfs2/dlm/userdlm.h
@@ -33,7 +33,7 @@
#include <linux/workqueue.h>
/* user_lock_res->l_flags flags. */
-#define USER_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define USER_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define USER_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index ec68442..6e6cc0a 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2841,9 +2841,8 @@
lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
lockres->l_unlock_action = OCFS2_UNLOCK_INVALID;
- spin_unlock_irqrestore(&lockres->l_lock, flags);
-
wake_up(&lockres->l_event);
+ spin_unlock_irqrestore(&lockres->l_lock, flags);
mlog_exit_void();
}
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index fef7ece..3fed9e3 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -85,7 +85,7 @@
};
/* ocfs2_lock_res->l_flags flags. */
-#define OCFS2_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define OCFS2_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define OCFS2_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index faec2d8..9b76d41 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -740,6 +740,9 @@
static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
+ if (!lksb->lksb_fsdlm.sb_lvbptr)
+ lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb +
+ sizeof(struct dlm_lksb);
return (void *)(lksb->lksb_fsdlm.sb_lvbptr);
}
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 6e74b11..30ebde4 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -106,6 +106,7 @@
udf_truncate_tail_extent(inode);
unlock_kernel();
write_inode_now(inode, 0);
+ invalidate_inode_buffers(inode);
}
iinfo = UDF_I(inode);
kfree(iinfo->i_ext.i_data);
diff --git a/include/acpi/acpredef.h b/include/acpi/acpredef.h
index 619fb75..16a9ca9 100644
--- a/include/acpi/acpredef.h
+++ b/include/acpi/acpredef.h
@@ -167,7 +167,7 @@
{.info = {"_BFS", 1, 0}},
{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
9,
- ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */
+ ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
{.info = {"_BLT", 3, 0}},
{.info = {"_BMC", 1, 0}},
{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
@@ -346,7 +346,7 @@
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+ {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
{.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
};
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 28c7f16..d5e8e5c 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1151,6 +1151,7 @@
extern void drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
/* Modesetting support */
extern int drm_modeset_ctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
diff --git a/include/linux/compat.h b/include/linux/compat.h
index f061a1e..e88f3ec 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -252,12 +252,10 @@
compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */
/*
* epoll (fs/eventpoll.c) compat bits follow ...
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 7dcbc82..13875ce 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -63,12 +63,14 @@
#endif /* CONFIG_HIGHMEM */
/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
{
void *addr = kmap_atomic(page, KM_USER0);
clear_user_page(addr, vaddr, page);
kunmap_atomic(addr, KM_USER0);
}
+#endif
#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
/**
diff --git a/include/linux/idr.h b/include/linux/idr.h
index fa035f9..dd846df 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -52,13 +52,14 @@
unsigned long bitmap; /* A zero bit means "space here" */
struct idr_layer *ary[1<<IDR_BITS];
int count; /* When zero, we can release it */
+ int layer; /* distance from leaf */
struct rcu_head rcu_head;
};
struct idr {
struct idr_layer *top;
struct idr_layer *id_free;
- int layers;
+ int layers; /* only valid without concurrent changes */
int id_free_cnt;
spinlock_t lock;
};
diff --git a/include/linux/irq.h b/include/linux/irq.h
index d058c57..3dddfa7 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -63,7 +63,8 @@
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
-#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
@@ -130,7 +131,7 @@
/**
* struct irq_desc - interrupt descriptor
- *
+ * @irq: interrupt number for this descriptor
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
@@ -149,7 +150,6 @@
* @cpu: cpu index useful for balancing
* @pending_mask: pending rebalanced interrupts
* @dir: /proc/irq/ procfs entry
- * @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
@@ -210,7 +210,6 @@
#ifdef CONFIG_GENERIC_PENDING_IRQ
-void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
void move_masked_irq(int irq);
@@ -228,10 +227,6 @@
{
}
-static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-}
-
#endif /* CONFIG_GENERIC_PENDING_IRQ */
#else /* CONFIG_SMP */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 59b0f1c..ed3f26e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -375,6 +375,7 @@
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
+ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 2f5f8a5..36c82c9 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -91,7 +91,7 @@
#ifdef CONFIG_MEMORY_HOTPLUG
#define hotplug_memory_notifier(fn, pri) { \
- static struct notifier_block fn##_mem_nb = \
+ static __meminitdata struct notifier_block fn##_mem_nb =\
{ .notifier_call = fn, .priority = pri }; \
register_memory_notifier(&fn##_mem_nb); \
}
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index bd9977b..371086f 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -179,6 +179,7 @@
int num_ports;
int vl_cap[MLX4_MAX_PORTS + 1];
int ib_mtu_cap[MLX4_MAX_PORTS + 1];
+ __be32 ib_port_def_cap[MLX4_MAX_PORTS + 1];
u64 def_mac[MLX4_MAX_PORTS + 1];
int eth_mtu_cap[MLX4_MAX_PORTS + 1];
int gid_table_len[MLX4_MAX_PORTS + 1];
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index f546ad6..1e6d34b 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -17,7 +17,7 @@
struct list_head lru; /* per cgroup LRU list */
};
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
void __init page_cgroup_init(void);
struct page_cgroup *lookup_page_cgroup(struct page *page);
@@ -91,7 +91,7 @@
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
}
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 7ad48f2..2d0a93c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -631,6 +631,10 @@
atomic_t inotify_watches; /* How many inotify watches does this user have? */
atomic_t inotify_devs; /* How many inotify devs does this user have opened? */
#endif
+#ifdef CONFIG_EPOLL
+ atomic_t epoll_devs; /* The number of epoll descriptors currently open */
+ atomic_t epoll_watches; /* The number of file descriptors currently watched */
+#endif
#ifdef CONFIG_POSIX_MQUEUE
/* protected by mq_lock */
unsigned long mq_bytes; /* How many bytes can be allocated to mqueue? */
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 5a732c5..8ea32e8 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -462,7 +462,7 @@
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
{
unsigned long val = CPU_STARTING;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index da7ff61..96c0ba1 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -585,7 +585,7 @@
int i, j, k; /* indices for partition finding loops */
cpumask_t *doms; /* resulting partition; i.e. sched domains */
struct sched_domain_attr *dattr; /* attributes for custom domains */
- int ndoms; /* number of sched domains in result */
+ int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
doms = NULL;
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index c9767e6..64c1c72 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -25,6 +25,8 @@
struct irqaction *action) { }
#endif
+extern int irq_select_affinity_usr(unsigned int irq);
+
/*
* Debugging printout:
*/
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index c498a1b..801addd 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -82,24 +82,27 @@
int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
{
struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
if (!desc->chip->set_affinity)
return -EINVAL;
+ spin_lock_irqsave(&desc->lock, flags);
+
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
- spin_unlock_irqrestore(&desc->lock, flags);
- } else
- set_pending_irq(irq, cpumask);
+ } else {
+ desc->status |= IRQ_MOVE_PENDING;
+ desc->pending_mask = cpumask;
+ }
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
#endif
+ desc->status |= IRQ_AFFINITY_SET;
+ spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
@@ -107,24 +110,59 @@
/*
* Generic version of the affinity autoselector.
*/
-int irq_select_affinity(unsigned int irq)
+int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc)
{
cpumask_t mask;
- struct irq_desc *desc;
if (!irq_can_set_affinity(irq))
return 0;
cpus_and(mask, cpu_online_map, irq_default_affinity);
- desc = irq_to_desc(irq);
+ /*
+ * Preserve an userspace affinity setup, but make sure that
+ * one of the targets is online.
+ */
+ if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) {
+ if (cpus_intersects(desc->affinity, cpu_online_map))
+ mask = desc->affinity;
+ else
+ desc->status &= ~IRQ_AFFINITY_SET;
+ }
+
desc->affinity = mask;
desc->chip->set_affinity(irq, mask);
return 0;
}
+#else
+static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d)
+{
+ return irq_select_affinity(irq);
+}
#endif
+/*
+ * Called when affinity is set via /proc/irq
+ */
+int irq_select_affinity_usr(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ ret = do_irq_select_affinity(irq, desc);
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ return ret;
+}
+
+#else
+static inline int do_irq_select_affinity(int irq, struct irq_desc *desc)
+{
+ return 0;
+}
#endif
/**
@@ -327,7 +365,7 @@
* IRQF_TRIGGER_* but the PIC does not support multiple
* flow-types?
*/
- pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+ pr_debug("No set_type function for IRQ %d (%s)\n", irq,
chip ? (chip->name ? : "unknown") : "unknown");
return 0;
}
@@ -445,8 +483,12 @@
/* Undo nested disables: */
desc->depth = 1;
+ /* Exclude IRQ from balancing if requested */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Set default affinity mask once everything is setup */
- irq_select_affinity(irq);
+ do_irq_select_affinity(irq, desc);
} else if ((new->flags & IRQF_TRIGGER_MASK)
&& (new->flags & IRQF_TRIGGER_MASK)
@@ -459,10 +501,6 @@
*p = new;
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index 90b920d..9db681d 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -1,17 +1,6 @@
#include <linux/irq.h>
-void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- desc->status |= IRQ_MOVE_PENDING;
- desc->pending_mask = mask;
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
void move_masked_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 4d161c7..d257e7d 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -62,7 +62,7 @@
if (!cpus_intersects(new_value, cpu_online_map))
/* Special case for empty set - allow the architecture
code to set default SMP affinity. */
- return irq_select_affinity(irq) ? -EINVAL : count;
+ return irq_select_affinity_usr(irq) ? -EINVAL : count;
irq_set_affinity(irq, new_value);
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 06e1571..46a4041 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -3276,10 +3276,10 @@
{
printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n");
- printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
+ printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH);
printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS);
- printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
+ printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES);
printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS);
printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE);
diff --git a/kernel/panic.c b/kernel/panic.c
index 6513aac..4d50883 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -167,6 +167,7 @@
* 'M' - System experienced a machine check exception.
* 'B' - System has hit bad_page.
* 'U' - Userspace-defined naughtiness.
+ * 'D' - Kernel has oopsed before
* 'A' - ACPI table overridden.
* 'W' - Taint on warning.
* 'C' - modules from drivers/staging are loaded.
diff --git a/kernel/profile.c b/kernel/profile.c
index 7f93a50..60adefb 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -351,7 +351,7 @@
put_cpu();
}
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
{
int node, cpu = (unsigned long)__cpu;
@@ -596,7 +596,7 @@
#define create_hash_tables() ({ 0; })
#endif
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
{
struct proc_dir_entry *entry;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 1e68e4c..4c8bcd7 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -612,7 +612,7 @@
return (copied == sizeof(data)) ? 0 : -EIO;
}
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
#include <linux/compat.h>
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
@@ -709,4 +709,4 @@
unlock_kernel();
return ret;
}
-#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif /* CONFIG_COMPAT */
diff --git a/kernel/sched.c b/kernel/sched.c
index 52490bf..7729c4b 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1459,9 +1459,10 @@
static unsigned long cpu_avg_load_per_task(int cpu)
{
struct rq *rq = cpu_rq(cpu);
+ unsigned long nr_running = ACCESS_ONCE(rq->nr_running);
- if (rq->nr_running)
- rq->avg_load_per_task = rq->load.weight / rq->nr_running;
+ if (nr_running)
+ rq->avg_load_per_task = rq->load.weight / nr_running;
else
rq->avg_load_per_task = 0;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 65d4a9b..c83f566 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -176,6 +176,9 @@
#ifdef CONFIG_INOTIFY_USER
extern struct ctl_table inotify_table[];
#endif
+#ifdef CONFIG_EPOLL
+extern struct ctl_table epoll_table[];
+#endif
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
@@ -1335,6 +1338,13 @@
.child = inotify_table,
},
#endif
+#ifdef CONFIG_EPOLL
+ {
+ .procname = "epoll",
+ .mode = 0555,
+ .child = epoll_table,
+ },
+#endif
#endif
{
.ctl_name = KERN_SETUID_DUMPABLE,
diff --git a/lib/idr.c b/lib/idr.c
index e728c7f..7a785a0 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -185,6 +185,7 @@
new = get_from_free_list(idp);
if (!new)
return -1;
+ new->layer = l-1;
rcu_assign_pointer(p->ary[m], new);
p->count++;
}
@@ -210,6 +211,7 @@
if (unlikely(!p)) {
if (!(p = get_from_free_list(idp)))
return -1;
+ p->layer = 0;
layers = 1;
}
/*
@@ -237,6 +239,7 @@
}
new->ary[0] = p;
new->count = 1;
+ new->layer = layers-1;
if (p->bitmap == IDR_FULL)
__set_bit(0, &new->bitmap);
p = new;
@@ -493,17 +496,21 @@
int n;
struct idr_layer *p;
- n = idp->layers * IDR_BITS;
p = rcu_dereference(idp->top);
+ if (!p)
+ return NULL;
+ n = (p->layer+1) * IDR_BITS;
/* Mask off upper bits we don't use for the search. */
id &= MAX_ID_MASK;
if (id >= (1 << n))
return NULL;
+ BUG_ON(n == 0);
while (n > 0 && p) {
n -= IDR_BITS;
+ BUG_ON(n != p->layer*IDR_BITS);
p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
}
return((void *)p);
@@ -582,8 +589,11 @@
int n;
struct idr_layer *p, *old_p;
- n = idp->layers * IDR_BITS;
p = idp->top;
+ if (!p)
+ return ERR_PTR(-EINVAL);
+
+ n = (p->layer+1) * IDR_BITS;
id &= MAX_ID_MASK;
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b5b2b15..b173711 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -189,7 +189,7 @@
pgdat->node_start_pfn;
}
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
@@ -216,7 +216,7 @@
return 0;
}
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
@@ -273,7 +273,7 @@
* call this function after deciding the zone to which to
* add the new pages.
*/
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
@@ -470,7 +470,8 @@
}
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
{
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 1223d92..0b3cbf0 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -21,7 +21,7 @@
#if !defined(CONFIG_SPARSEMEM)
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
pgdat->node_page_cgroup = NULL;
}
@@ -97,7 +97,8 @@
return section->page_cgroup + pfn;
}
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
{
struct mem_section *section;
struct page_cgroup *base, *pc;
@@ -106,19 +107,29 @@
section = __pfn_to_section(pfn);
- if (section->page_cgroup)
- return 0;
-
- nid = page_to_nid(pfn_to_page(pfn));
-
- table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
- if (slab_is_available()) {
- base = kmalloc_node(table_size, GFP_KERNEL, nid);
- if (!base)
- base = vmalloc_node(table_size, nid);
- } else {
- base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+ if (!section->page_cgroup) {
+ nid = page_to_nid(pfn_to_page(pfn));
+ table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
+ if (slab_is_available()) {
+ base = kmalloc_node(table_size, GFP_KERNEL, nid);
+ if (!base)
+ base = vmalloc_node(table_size, nid);
+ } else {
+ base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+ table_size,
PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+ }
+ } else {
+ /*
+ * We don't have to allocate page_cgroup again, but
+ * address of memmap may be changed. So, we have to initialize
+ * again.
+ */
+ base = section->page_cgroup + pfn;
+ table_size = 0;
+ /* check address of memmap is changed or not. */
+ if (base->page == pfn_to_page(pfn))
+ return 0;
}
if (!base) {
@@ -158,7 +169,7 @@
}
}
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages,
int nid)
{
@@ -183,7 +194,7 @@
return -ENOMEM;
}
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages, int nid)
{
unsigned long start, end, pfn;
@@ -197,7 +208,7 @@
}
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
unsigned long action, void *arg)
{
struct memory_notify *mn = arg;
@@ -207,18 +218,23 @@
ret = online_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
- case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
offline_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
+ case MEM_CANCEL_ONLINE:
case MEM_GOING_OFFLINE:
break;
case MEM_ONLINE:
case MEM_CANCEL_OFFLINE:
break;
}
- ret = notifier_from_errno(ret);
+
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
+
return ret;
}
@@ -248,7 +264,7 @@
" want\n");
}
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
return;
}
diff --git a/mm/slub.c b/mm/slub.c
index 7ad489a..749588a 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2931,8 +2931,10 @@
case MEM_CANCEL_OFFLINE:
break;
}
-
- ret = notifier_from_errno(ret);
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
return ret;
}
diff --git a/mm/sparse.c b/mm/sparse.c
index 39db301..083f5b6 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -570,7 +570,7 @@
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
int nr_pages)
{
unsigned long section_nr = pfn_to_section_nr(start_pfn);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 30f826d..f3f6e07 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -77,7 +77,6 @@
BUG_ON(addr >= end);
pgd = pgd_offset_k(addr);
- flush_cache_vunmap(addr, end);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
@@ -543,9 +542,10 @@
}
/*
- * Free and unmap a vmap area
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
*/
-static void free_unmap_vmap_area(struct vmap_area *va)
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
@@ -553,6 +553,15 @@
try_purge_vmap_area_lazy();
}
+/*
+ * Free and unmap a vmap area
+ */
+static void free_unmap_vmap_area(struct vmap_area *va)
+{
+ flush_cache_vunmap(va->va_start, va->va_end);
+ free_unmap_vmap_area_noflush(va);
+}
+
static struct vmap_area *find_vmap_area(unsigned long addr)
{
struct vmap_area *va;
@@ -734,7 +743,7 @@
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area(vb->va);
+ free_unmap_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
@@ -796,6 +805,9 @@
BUG_ON(size & ~PAGE_MASK);
BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
+
+ flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size);
+
order = get_order(size);
offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 7ea1440..62e7f62 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1248,6 +1248,7 @@
list_add(&page->lru, &l_inactive);
}
+ spin_lock_irq(&zone->lru_lock);
/*
* Count referenced pages from currently used mappings as
* rotated, even though they are moved to the inactive list.
@@ -1263,7 +1264,6 @@
pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
- spin_lock_irq(&zone->lru_lock);
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index a53e2fc..d27aad7 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -378,6 +378,10 @@
# print STDERR "parameter def '$1' = '$contents'\n";
$name = $1;
$parameterdescs{$name} = $contents;
+ } elsif ($name eq "@\.\.\.") {
+# print STDERR "parameter def '...' = '$contents'\n";
+ $name = "...";
+ $parameterdescs{$name} = $contents;
} else {
# print STDERR "other section '$name' = '$contents'\n";
if (defined($sections{$name}) && ($sections{$name} ne "")) {
@@ -1588,12 +1592,12 @@
if ($type eq "" && $param =~ /\.\.\.$/)
{
- $type="";
- $parameterdescs{$param} = "variable arguments";
+ if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
+ $parameterdescs{$param} = "variable arguments";
+ }
}
elsif ($type eq "" && ($param eq "" or $param eq "void"))
{
- $type="";
$param="void";
$parameterdescs{void} = "no arguments";
}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ba1ab73..eb91641 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1436,12 +1436,12 @@
{
hda_nid_t *d;
- snd_hda_codec_write(codec, nid, 0, verb, val);
+ snd_hda_codec_write_cache(codec, nid, 0, verb, val);
d = codec->slave_dig_outs;
if (!d)
return;
for (; *d; d++)
- snd_hda_codec_write(codec, *d, 0, verb, val);
+ snd_hda_codec_write_cache(codec, *d, 0, verb, val);
}
static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 9563b5b..5dd3e89 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -70,7 +70,9 @@
enum {
STAC_92HD73XX_REF,
- STAC_DELL_M6,
+ STAC_DELL_M6_AMIC,
+ STAC_DELL_M6_DMIC,
+ STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
STAC_92HD73XX_MODELS
};
@@ -84,6 +86,7 @@
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
STAC_DELL_M4_2,
+ STAC_DELL_M4_3,
STAC_HP_M4,
STAC_92HD71BXX_MODELS
};
@@ -137,6 +140,7 @@
unsigned int num_mixers;
int board_config;
+ unsigned int eapd_switch: 1;
unsigned int surr_switch: 1;
unsigned int line_switch: 1;
unsigned int mic_switch: 1;
@@ -1600,13 +1604,17 @@
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
- [STAC_DELL_M6] = dell_m6_pin_configs,
+ [STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = "ref",
- [STAC_DELL_M6] = "dell-m6",
+ [STAC_DELL_M6_AMIC] = "dell-m6-amic",
+ [STAC_DELL_M6_DMIC] = "dell-m6-dmic",
+ [STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
};
@@ -1615,19 +1623,23 @@
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
- "unknown Dell", STAC_DELL_M6),
+ "Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272,
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+ "Dell Studio 1537", STAC_DELL_M6_DMIC),
{} /* terminator */
};
@@ -1670,10 +1682,17 @@
0x40f000f0, 0x044413b0, 0x044413b0,
};
+static unsigned int dell_m4_3_pin_configs[11] = {
+ 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+ 0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
[STAC_DELL_M4_1] = dell_m4_1_pin_configs,
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
+ [STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
};
@@ -1681,6 +1700,7 @@
[STAC_92HD71BXX_REF] = "ref",
[STAC_DELL_M4_1] = "dell-m4-1",
[STAC_DELL_M4_2] = "dell-m4-2",
+ [STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
};
@@ -1716,6 +1736,8 @@
"unknown Dell", STAC_DELL_M4_2),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
"unknown Dell", STAC_DELL_M4_2),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+ "unknown Dell", STAC_DELL_M4_3),
{} /* terminator */
};
@@ -2877,7 +2899,7 @@
cfg->hp_outs && !spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
- if (cfg->hp_outs > 1) {
+ if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_HP_SWITCH,
"Headphone as Line Out Switch",
@@ -3683,10 +3705,14 @@
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
}
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable);
+
static int stac92xx_init(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int gpio;
int i;
snd_hda_sequence_write(codec, spec->init);
@@ -3697,6 +3723,16 @@
snd_hda_codec_write_cache(codec,
spec->adc_nids[i], 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+ /* set up GPIO */
+ gpio = spec->gpio_data;
+ /* turn on EAPD statically when spec->eapd_switch isn't set.
+ * otherwise, unsol event will turn it on/off dynamically
+ */
+ if (!spec->eapd_switch)
+ gpio |= spec->eapd_mask;
+ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio);
+
/* set up pins */
if (spec->hp_detect) {
/* Enable unsolicited responses on the HP widget */
@@ -3736,39 +3772,43 @@
for (i = 0; i < spec->num_dmics; i++)
stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
AC_PINCTL_IN_EN);
- for (i = 0; i < spec->num_pwrs; i++) {
- int event = is_nid_hp_pin(cfg, spec->pwr_nids[i])
- ? STAC_HP_EVENT : STAC_PWR_EVENT;
- int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
- def_conf = get_defcfg_connect(def_conf);
- /* outputs are only ports capable of power management
- * any attempts on powering down a input port cause the
- * referenced VREF to act quirky.
- */
- if (pinctl & AC_PINCTL_IN_EN)
- continue;
- /* skip any ports that don't have jacks since presence
- * detection is useless */
- if (def_conf && def_conf != AC_JACK_PORT_FIXED)
- continue;
- enable_pin_detect(codec, spec->pwr_nids[i], event | i);
- codec->patch_ops.unsol_event(codec, (event | i) << 26);
- }
- if (spec->dac_list)
- stac92xx_power_down(codec);
if (cfg->dig_out_pin)
stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
AC_PINCTL_OUT_EN);
if (cfg->dig_in_pin)
stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
AC_PINCTL_IN_EN);
+ for (i = 0; i < spec->num_pwrs; i++) {
+ hda_nid_t nid = spec->pwr_nids[i];
+ int pinctl, def_conf;
+ int event = STAC_PWR_EVENT;
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
+ if (is_nid_hp_pin(cfg, nid) && spec->hp_detect)
+ continue; /* already has an unsol event */
+ pinctl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ /* outputs are only ports capable of power management
+ * any attempts on powering down a input port cause the
+ * referenced VREF to act quirky.
+ */
+ if (pinctl & AC_PINCTL_IN_EN)
+ continue;
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ def_conf = get_defcfg_connect(def_conf);
+ /* skip any ports that don't have jacks since presence
+ * detection is useless */
+ if (def_conf != AC_JACK_PORT_COMPLEX) {
+ if (def_conf != AC_JACK_PORT_NONE)
+ stac_toggle_power_map(codec, nid, 1);
+ continue;
+ }
+ enable_pin_detect(codec, spec->pwr_nids[i], event | i);
+ codec->patch_ops.unsol_event(codec, (event | i) << 26);
+ }
+ if (spec->dac_list)
+ stac92xx_power_down(codec);
return 0;
}
@@ -3901,7 +3941,7 @@
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
@@ -3916,7 +3956,7 @@
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
@@ -3933,14 +3973,18 @@
}
}
-static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->pwr_nids[idx];
- int presence, val;
- val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
- & 0x000000ff;
- presence = get_hp_pin_presence(codec, nid);
+ unsigned int idx, val;
+
+ for (idx = 0; idx < spec->num_pwrs; idx++) {
+ if (spec->pwr_nids[idx] == nid)
+ break;
+ }
+ if (idx >= spec->num_pwrs)
+ return;
/* several codecs have two power down bits */
if (spec->pwr_mapping)
@@ -3948,14 +3992,20 @@
else
idx = 1 << idx;
- if (presence)
+ val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
+ if (enable)
val &= ~idx;
else
val |= idx;
/* power down unused output ports */
snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val);
-};
+}
+
+static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+ stac_toggle_power_map(codec, nid, get_hp_pin_presence(codec, nid));
+}
static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
{
@@ -4239,31 +4289,29 @@
case STAC_DELL_EQ:
spec->init = dell_eq_core_init;
/* fallthru */
- case STAC_DELL_M6:
+ case STAC_DELL_M6_AMIC:
+ case STAC_DELL_M6_DMIC:
+ case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
+ spec->eapd_switch = 0;
spec->num_amps = 1;
if (!spec->init)
spec->init = dell_m6_core_init;
- switch (codec->subsystem_id) {
- case 0x1028025e: /* Analog Mics */
- case 0x1028025f:
+ switch (spec->board_config) {
+ case STAC_DELL_M6_AMIC: /* Analog Mics */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
spec->private_dimux.num_items = 1;
break;
- case 0x10280271: /* Digital Mics */
- case 0x10280272:
- case 0x10280254:
- case 0x10280255:
+ case STAC_DELL_M6_DMIC: /* Digital Mics */
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
spec->private_dimux.num_items = 2;
break;
- case 0x10280256: /* Both */
- case 0x10280057:
+ case STAC_DELL_M6_BOTH: /* Both */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
@@ -4274,6 +4322,7 @@
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 1;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
@@ -4419,7 +4468,13 @@
static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state)
{
+ struct sigmatel_spec *spec = codec->spec;
+
stac92hd71xx_set_power_state(codec, AC_PWRST_D3);
+ if (spec->eapd_mask)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
return 0;
};
@@ -4562,14 +4617,21 @@
switch (spec->board_config) {
case STAC_HP_M4:
- spec->num_dmics = 0;
- spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
-
/* enable internal microphone */
stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
stac92xx_auto_set_pinctl(codec, 0x0e,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+ /* fallthru */
+ case STAC_DELL_M4_2:
+ spec->num_dmics = 0;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
+ break;
+ case STAC_DELL_M4_1:
+ case STAC_DELL_M4_3:
+ spec->num_dmics = 1;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
@@ -4806,6 +4868,7 @@
spec->num_pwrs = 0;
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
if (!err) {
@@ -4886,6 +4949,7 @@
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
spec->multiout.dac_nids = spec->dac_nids;
switch (spec->board_config){
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index bba9546..8d73edc 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -20,7 +20,8 @@
config SND_SOC_MPC5200_I2S
tristate "Freescale MPC5200 PSC in I2S mode driver"
+ depends on SND_SOC && PPC_MPC52xx && PPC_BESTCOMM
select SND_SOC_OF_SIMPLE
- depends on SND_SOC && PPC_MPC52xx
+ select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in I2S mode.
diff --git a/sound/sound_core.c b/sound/sound_core.c
index a75b289..10ba421 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -457,7 +457,7 @@
void unregister_sound_midi(int unit)
{
- return sound_remove_unit(&chains[2], unit);
+ sound_remove_unit(&chains[2], unit);
}
EXPORT_SYMBOL(unregister_sound_midi);
@@ -474,7 +474,7 @@
void unregister_sound_dsp(int unit)
{
- return sound_remove_unit(&chains[3], unit);
+ sound_remove_unit(&chains[3], unit);
}
@@ -507,7 +507,7 @@
return NULL;
}
-int soundcore_open(struct inode *inode, struct file *file)
+static int soundcore_open(struct inode *inode, struct file *file)
{
int chain;
int unit = iminor(inode);
