diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index f429862..550ddfa 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -44,6 +44,19 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cxacru.
 
+config USB_UEAGLEATM
+	tristate "ADI 930 and eagle USB DSL modem"
+	depends on USB_ATM
+	select FW_LOADER
+	help
+	  Say Y here if you have an ADSL USB modem based on the ADI 930
+	  or eagle chipset. In order to use your modem you will need to
+	  install firmwares and CMV (Command Management Variables); see
+	  <https://gna.org/projects/ueagleatm/> for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ueagle-atm.
+
 config USB_XUSBATM
 	tristate "Other USB DSL modem support"
 	depends on USB_ATM
diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile
index 8509971..4c4a776 100644
--- a/drivers/usb/atm/Makefile
+++ b/drivers/usb/atm/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_USB_CXACRU)	+= cxacru.o
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= speedtch.o
+obj-$(CONFIG_USB_UEAGLEATM)	+= ueagle-atm.o
 obj-$(CONFIG_USB_ATM)		+= usbatm.o
 obj-$(CONFIG_USB_XUSBATM)	+= xusbatm.o
 
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
new file mode 100644
index 0000000..3e2475c
--- /dev/null
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -0,0 +1,1813 @@
+/*-
+ * Copyright (c) 2003, 2004
+ *	Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
+ *
+ * Copyright (c) 2005 Matthieu Castet <castet.matthieu@free.fr>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * GPL license :
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ *
+ * HISTORY : some part of the code was base on ueagle 1.3 BSD driver,
+ * Damien Bergamini agree to put his code under a DUAL GPL/BSD license.
+ *
+ * The rest of the code was was rewritten from scratch.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/ctype.h>
+#include <linux/kthread.h>
+#include <linux/version.h>
+#include <asm/unaligned.h>
+
+#include "usbatm.h"
+
+#define EAGLEUSBVERSION "ueagle 1.1"
+
+
+/*
+ * Debug macros
+ */
+#define uea_dbg(usb_dev, format, args...)	\
+	do { \
+		if (debug >= 1) \
+			dev_dbg(&(usb_dev)->dev, \
+				"[ueagle-atm dbg] %s: " format, \
+					__FUNCTION__, ##args); \
+       } while (0)
+
+#define uea_vdbg(usb_dev, format, args...)	\
+	do { \
+		if (debug >= 2) \
+			dev_dbg(&(usb_dev)->dev, \
+				"[ueagle-atm vdbg]  " format, ##args); \
+       } while (0)
+
+#define uea_enters(usb_dev) \
+	uea_vdbg(usb_dev, "entering %s\n", __FUNCTION__)
+
+#define uea_leaves(usb_dev) \
+	uea_vdbg(usb_dev, "leaving  %s\n", __FUNCTION__)
+
+#define uea_err(usb_dev, format,args...) \
+	dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args)
+
+#define uea_warn(usb_dev, format,args...) \
+	dev_warn(&(usb_dev)->dev ,"[Ueagle-atm] " format, ##args)
+
+#define uea_info(usb_dev, format,args...) \
+	dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args)
+
+struct uea_cmvs {
+	u32 address;
+	u16 offset;
+	u32 data;
+} __attribute__ ((packed));
+
+struct uea_softc {
+	struct usb_device *usb_dev;
+	struct usbatm_data *usbatm;
+
+	int modem_index;
+	unsigned int driver_info;
+
+	int booting;
+	int reset;
+
+	wait_queue_head_t sync_q;
+
+	struct task_struct *kthread;
+	u32 data;
+	wait_queue_head_t cmv_ack_wait;
+	int cmv_ack;
+
+	struct work_struct task;
+	u16 pageno;
+	u16 ovl;
+
+	const struct firmware *dsp_firm;
+	struct urb *urb_int;
+
+	u8 cmv_function;
+	u16 cmv_idx;
+	u32 cmv_address;
+	u16 cmv_offset;
+
+	/* keep in sync with eaglectl */
+	struct uea_stats {
+		struct {
+			u32 state;
+			u32 flags;
+			u32 mflags;
+			u32 vidcpe;
+			u32 vidco;
+			u32 dsrate;
+			u32 usrate;
+			u32 dsunc;
+			u32 usunc;
+			u32 dscorr;
+			u32 uscorr;
+			u32 txflow;
+			u32 rxflow;
+			u32 usattenuation;
+			u32 dsattenuation;
+			u32 dsmargin;
+			u32 usmargin;
+			u32 firmid;
+		} phy;
+	} stats;
+};
+
+/*
+ * Elsa IDs
+ */
+#define ELSA_VID		0x05CC
+#define ELSA_PID_PSTFIRM	0x3350
+#define ELSA_PID_PREFIRM	0x3351
+
+/*
+ * Sagem USB IDs
+ */
+#define EAGLE_VID		0x1110
+#define EAGLE_I_PID_PREFIRM	0x9010	/* Eagle I */
+#define EAGLE_I_PID_PSTFIRM	0x900F	/* Eagle I */
+
+#define EAGLE_IIC_PID_PREFIRM	0x9024	/* Eagle IIC */
+#define EAGLE_IIC_PID_PSTFIRM	0x9023	/* Eagle IIC */
+
+#define EAGLE_II_PID_PREFIRM	0x9022	/* Eagle II */
+#define EAGLE_II_PID_PSTFIRM	0x9021	/* Eagle II */
+
+/*
+ *  Eagle III Pid
+ */
+#define EAGLE_III_PID_PREFIRM	0x9032	/* Eagle III */
+#define EAGLE_III_PID_PSTFIRM	0x9031	/* Eagle III */
+
+/*
+ * USR USB IDs
+ */
+#define USR_VID			0x0BAF
+#define MILLER_A_PID_PREFIRM	0x00F2
+#define MILLER_A_PID_PSTFIRM	0x00F1
+#define MILLER_B_PID_PREFIRM	0x00FA
+#define MILLER_B_PID_PSTFIRM	0x00F9
+#define HEINEKEN_A_PID_PREFIRM	0x00F6
+#define HEINEKEN_A_PID_PSTFIRM	0x00F5
+#define HEINEKEN_B_PID_PREFIRM	0x00F8
+#define HEINEKEN_B_PID_PSTFIRM	0x00F7
+
+#define PREFIRM 0
+#define PSTFIRM (1<<7)
+enum {
+	ADI930 = 0,
+	EAGLE_I,
+	EAGLE_II,
+	EAGLE_III
+};
+
+/* macros for both struct usb_device_id and struct uea_softc */
+#define UEA_IS_PREFIRM(x) \
+	(!((x)->driver_info & PSTFIRM))
+#define UEA_CHIP_VERSION(x) \
+	((x)->driver_info & 0xf)
+
+#define IS_ISDN(sc) \
+	(le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80)
+
+#define INS_TO_USBDEV(ins) ins->usb_dev
+
+#define GET_STATUS(data) \
+	((data >> 8) & 0xf)
+#define IS_OPERATIONAL(sc) \
+	(GET_STATUS(sc->stats.phy.state) == 2)
+
+/*
+ * Set of macros to handle unaligned data in the firmware blob.
+ * The FW_GET_BYTE() macro is provided only for consistency.
+ */
+
+#define FW_GET_BYTE(p)	*((__u8 *) (p))
+#define FW_GET_WORD(p)	le16_to_cpu(get_unaligned((__le16 *) (p)))
+#define FW_GET_LONG(p)	le32_to_cpu(get_unaligned((__le32 *) (p)))
+
+#define FW_DIR "ueagle-atm/"
+#define NB_MODEM 4
+
+#define BULK_TIMEOUT 300
+#define CTRL_TIMEOUT 1000
+
+#define ACK_TIMEOUT msecs_to_jiffies(1500)
+
+#define UEA_INTR_IFACE_NO 	0
+#define UEA_US_IFACE_NO		1
+#define UEA_DS_IFACE_NO		2
+
+#define FASTEST_ISO_INTF	8
+
+#define UEA_BULK_DATA_PIPE	0x02
+#define UEA_IDMA_PIPE		0x04
+#define UEA_INTR_PIPE		0x04
+#define UEA_ISO_DATA_PIPE	0x08
+
+#define UEA_SET_BLOCK    	0x0001
+#define UEA_SET_MODE     	0x0003
+#define UEA_SET_2183_DATA	0x0004
+#define UEA_SET_TIMEOUT		0x0011
+
+#define UEA_LOOPBACK_OFF	0x0002
+#define UEA_LOOPBACK_ON		0x0003
+#define UEA_BOOT_IDMA		0x0006
+#define UEA_START_RESET		0x0007
+#define UEA_END_RESET		0x0008
+
+#define UEA_SWAP_MAILBOX	(0x3fcd | 0x4000)
+#define UEA_MPTX_START		(0x3fce | 0x4000)
+#define UEA_MPTX_MAILBOX	(0x3fd6 | 0x4000)
+#define UEA_MPRX_MAILBOX	(0x3fdf | 0x4000)
+
+/* structure describing a block within a DSP page */
+struct block_info {
+	__le16 wHdr;
+#define UEA_BIHDR 0xabcd
+	__le16 wAddress;
+	__le16 wSize;
+	__le16 wOvlOffset;
+	__le16 wOvl;		/* overlay */
+	__le16 wLast;
+} __attribute__ ((packed));
+#define BLOCK_INFO_SIZE 12
+
+/* structure representing a CMV (Configuration and Management Variable) */
+struct cmv {
+	__le16 wPreamble;
+#define PREAMBLE 0x535c
+	__u8 bDirection;
+#define MODEMTOHOST 0x01
+#define HOSTTOMODEM 0x10
+	__u8 bFunction;
+#define FUNCTION_TYPE(f)    ((f) >> 4)
+#define MEMACCESS	0x1
+#define ADSLDIRECTIVE	0x7
+
+#define FUNCTION_SUBTYPE(f) ((f) & 0x0f)
+/* for MEMACCESS */
+#define REQUESTREAD	0x0
+#define REQUESTWRITE	0x1
+#define REPLYREAD	0x2
+#define REPLYWRITE	0x3
+/* for ADSLDIRECTIVE */
+#define KERNELREADY	0x0
+#define MODEMREADY	0x1
+
+#define MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
+	__le16 wIndex;
+	__le32 dwSymbolicAddress;
+#define MAKESA(a, b, c, d)						\
+	(((c) & 0xff) << 24 |						\
+	 ((d) & 0xff) << 16 |						\
+	 ((a) & 0xff) << 8  |						\
+	 ((b) & 0xff))
+
+#define SA_CNTL MAKESA('C', 'N', 'T', 'L')
+#define SA_DIAG MAKESA('D', 'I', 'A', 'G')
+#define SA_INFO MAKESA('I', 'N', 'F', 'O')
+#define SA_OPTN MAKESA('O', 'P', 'T', 'N')
+#define SA_RATE MAKESA('R', 'A', 'T', 'E')
+#define SA_STAT MAKESA('S', 'T', 'A', 'T')
+	__le16 wOffsetAddress;
+	__le32 dwData;
+} __attribute__ ((packed));
+#define CMV_SIZE 16
+
+/* structure representing swap information */
+struct swap_info {
+	__u8 bSwapPageNo;
+	__u8 bOvl;		/* overlay */
+} __attribute__ ((packed));
+
+/* structure representing interrupt data */
+struct intr_pkt {
+	__u8 bType;
+	__u8 bNotification;
+	__le16 wValue;
+	__le16 wIndex;
+	__le16 wLength;
+	__le16 wInterrupt;
+#define INT_LOADSWAPPAGE 0x0001
+#define INT_INCOMINGCMV  0x0002
+	union {
+		struct {
+			struct swap_info swapinfo;
+			__le16 wDataSize;
+		} __attribute__ ((packed)) s1;
+
+		struct {
+			struct cmv cmv;
+			__le16 wDataSize;
+		} __attribute__ ((packed)) s2;
+	} __attribute__ ((packed)) u;
+#define bSwapPageNo	u.s1.swapinfo.bSwapPageNo
+#define bOvl		u.s1.swapinfo.bOvl
+} __attribute__ ((packed));
+#define INTR_PKT_SIZE 28
+
+static struct usb_driver uea_driver;
+static DECLARE_MUTEX(uea_semaphore);
+static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
+
+static int modem_index;
+static unsigned int debug;
+static int sync_wait[NB_MODEM];
+static char *cmv_file[NB_MODEM];
+
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
+module_param_array(sync_wait, bool, NULL, 0644);
+MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
+module_param_array(cmv_file, charp, NULL, 0644);
+MODULE_PARM_DESC(cmv_file,
+		"file name with configuration and management variables");
+
+#define UPDATE_ATM_STAT(type, val) \
+	do { \
+		if (sc->usbatm->atm_dev) \
+			sc->usbatm->atm_dev->type = val; \
+	} while (0)
+
+/* Firmware loading */
+#define LOAD_INTERNAL     0xA0
+#define F8051_USBCS       0x7f92
+
+/**
+ * uea_send_modem_cmd - Send a command for pre-firmware devices.
+ */
+static int uea_send_modem_cmd(struct usb_device *usb,
+		u16 addr, u16 size, u8 * buff)
+{
+	int ret = -ENOMEM;
+	u8 *xfer_buff;
+
+	xfer_buff = kmalloc(size, GFP_KERNEL);
+	if (xfer_buff) {
+		memcpy(xfer_buff, buff, size);
+		ret = usb_control_msg(usb,
+				      usb_sndctrlpipe(usb, 0),
+				      LOAD_INTERNAL,
+				      USB_DIR_OUT | USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE, addr, 0, xfer_buff,
+				      size, CTRL_TIMEOUT);
+		kfree(xfer_buff);
+	}
+
+	if (ret < 0)
+		return ret;
+
+	return (ret == size) ? 0 : -EIO;
+}
+
+static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *context)
+{
+	struct usb_device *usb = context;
+	u8 *pfw, value;
+	u32 crc = 0;
+	int ret, size;
+
+	uea_enters(usb);
+	if (!fw_entry) {
+		uea_err(usb, "firmware is not available\n");
+		goto err;
+	}
+
+	pfw = fw_entry->data;
+	size = fw_entry->size;
+
+	crc = FW_GET_LONG(pfw);
+	pfw += 4;
+	size -= 4;
+	if (crc32_be(0, pfw, size) != crc) {
+		uea_err(usb, "firmware is corrupted\n");
+		goto err;
+	}
+
+	/*
+	 * Start to upload formware : send reset
+	 */
+	value = 1;
+	ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
+
+	if (ret < 0) {
+		uea_err(usb, "modem reset failed with error %d\n", ret);
+		goto err;
+	}
+
+	while (size > 0) {
+		u8 len = FW_GET_BYTE(pfw);
+		u16 add = FW_GET_WORD(pfw + 1);
+		ret = uea_send_modem_cmd(usb, add, len, pfw + 3);
+		if (ret < 0) {
+			uea_err(usb, "uploading firmware data failed "
+					"with error %d\n", ret);
+			goto err;
+		}
+		pfw += len + 3;
+		size -= len + 3;
+	}
+
+	/*
+	 * Tell the modem we finish : de-assert reset
+	 */
+	value = 0;
+	ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value);
+	if (ret < 0)
+		uea_err(usb, "modem de-assert failed with error %d\n", ret);
+	else
+		uea_info(usb, "firmware uploaded\n");
+
+err:
+	uea_leaves(usb);
+}
+
+/**
+ * uea_load_firmware - Load usb firmware for pre-firmware devices.
+ */
+static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
+{
+	int ret;
+	char *fw_name = FW_DIR "eagle.fw";
+
+	uea_enters(usb);
+	uea_info(usb, "pre-firmware device, uploading firmware\n");
+
+	switch (ver) {
+	case ADI930:
+		fw_name = FW_DIR "adi930.fw";
+		break;
+	case EAGLE_I:
+		fw_name = FW_DIR "eagleI.fw";
+		break;
+	case EAGLE_II:
+		fw_name = FW_DIR "eagleII.fw";
+		break;
+	case EAGLE_III:
+		fw_name = FW_DIR "eagleIII.fw";
+		break;
+	}
+
+	ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, usb, uea_upload_pre_firmware);
+	if (ret)
+		uea_err(usb, "firmware %s is not available\n", fw_name);
+	else
+		uea_info(usb, "loading firmware %s\n", fw_name);
+
+	uea_leaves(usb);
+	return ret;
+}
+
+/* modem management : dsp firmware, send/read CMV, monitoring statistic
+ */
+
+/*
+ * Make sure that the DSP code provided is safe to use.
+ */
+static int check_dsp(u8 *dsp, unsigned int len)
+{
+	u8 pagecount, blockcount;
+	u16 blocksize;
+	u32 pageoffset;
+	unsigned int i, j, p, pp;
+
+	/* enough space for pagecount? */
+	if (len < 1)
+		return 1;
+
+	pagecount = FW_GET_BYTE(dsp);
+	p = 1;
+
+	/* enough space for page offsets? */
+	if (p + 4 * pagecount > len)
+		return 1;
+
+	for (i = 0; i < pagecount; i++) {
+
+		pageoffset = FW_GET_LONG(dsp + p);
+		p += 4;
+
+		if (pageoffset == 0)
+			continue;
+
+		/* enough space for blockcount? */
+		if (pageoffset >= len)
+			return 1;
+
+		pp = pageoffset;
+		blockcount = FW_GET_BYTE(dsp + pp);
+		pp += 1;
+
+		for (j = 0; j < blockcount; j++) {
+
+			/* enough space for block header? */
+			if (pp + 4 > len)
+				return 1;
+
+			pp += 2;	/* skip blockaddr */
+			blocksize = FW_GET_WORD(dsp + pp);
+			pp += 2;
+
+			/* enough space for block data? */
+			if (pp + blocksize > len)
+				return 1;
+
+			pp += blocksize;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * send data to the idma pipe
+ * */
+static int uea_idma_write(struct uea_softc *sc, void *data, u32 size)
+{
+	int ret = -ENOMEM;
+	u8 *xfer_buff;
+	int bytes_read;
+
+	xfer_buff = kmalloc(size, GFP_KERNEL);
+	if (!xfer_buff) {
+		uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
+		return ret;
+	}
+
+	memcpy(xfer_buff, data, size);
+
+	ret = usb_bulk_msg(sc->usb_dev,
+			 usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
+			 xfer_buff, size, &bytes_read, BULK_TIMEOUT);
+
+	kfree(xfer_buff);
+	if (ret < 0)
+		return ret;
+	if (size != bytes_read) {
+		uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size,
+		       bytes_read);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int request_dsp(struct uea_softc *sc)
+{
+	int ret;
+	char *dsp_name;
+
+	if (UEA_CHIP_VERSION(sc) == ADI930) {
+		if (IS_ISDN(sc))
+			dsp_name = FW_DIR "DSP9i.bin";
+		else
+			dsp_name = FW_DIR "DSP9p.bin";
+	} else {
+		if (IS_ISDN(sc))
+			dsp_name = FW_DIR "DSPei.bin";
+		else
+			dsp_name = FW_DIR "DSPep.bin";
+	}
+
+	ret = request_firmware(&sc->dsp_firm,
+				dsp_name, &sc->usb_dev->dev);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "requesting firmware %s failed with error %d\n",
+		       dsp_name, ret);
+		return ret;
+	}
+
+	if (check_dsp(sc->dsp_firm->data, sc->dsp_firm->size)) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+		       dsp_name);
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+		return -EILSEQ;
+	}
+
+	return 0;
+}
+
+/*
+ * The uea_load_page() function must be called within a process context
+ */
+static void uea_load_page(void *xsc)
+{
+	struct uea_softc *sc = xsc;
+	u16 pageno = sc->pageno;
+	u16 ovl = sc->ovl;
+	struct block_info bi;
+
+	u8 *p;
+	u8 pagecount, blockcount;
+	u16 blockaddr, blocksize;
+	u32 pageoffset;
+	int i;
+
+	/* reload firmware when reboot start and it's loaded already */
+	if (ovl == 0 && pageno == 0 && sc->dsp_firm) {
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+	}
+
+	if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
+		return;
+
+	p = sc->dsp_firm->data;
+	pagecount = FW_GET_BYTE(p);
+	p += 1;
+
+	if (pageno >= pagecount)
+		goto bad1;
+
+	p += 4 * pageno;
+	pageoffset = FW_GET_LONG(p);
+
+	if (pageoffset == 0)
+		goto bad1;
+
+	p = sc->dsp_firm->data + pageoffset;
+	blockcount = FW_GET_BYTE(p);
+	p += 1;
+
+	uea_dbg(INS_TO_USBDEV(sc),
+	       "sending %u blocks for DSP page %u\n", blockcount, pageno);
+
+	bi.wHdr = cpu_to_le16(UEA_BIHDR);
+	bi.wOvl = cpu_to_le16(ovl);
+	bi.wOvlOffset = cpu_to_le16(ovl | 0x8000);
+
+	for (i = 0; i < blockcount; i++) {
+		blockaddr = FW_GET_WORD(p);
+		p += 2;
+
+		blocksize = FW_GET_WORD(p);
+		p += 2;
+
+		bi.wSize = cpu_to_le16(blocksize);
+		bi.wAddress = cpu_to_le16(blockaddr);
+		bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
+
+		/* send block info through the IDMA pipe */
+		if (uea_idma_write(sc, &bi, BLOCK_INFO_SIZE))
+			goto bad2;
+
+		/* send block data through the IDMA pipe */
+		if (uea_idma_write(sc, p, blocksize))
+			goto bad2;
+
+		p += blocksize;
+	}
+
+	return;
+
+bad2:
+	uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
+	return;
+bad1:
+	uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno);
+}
+
+static inline void wake_up_cmv_ack(struct uea_softc *sc)
+{
+	sc->cmv_ack = 1;
+	wake_up(&sc->cmv_ack_wait);
+}
+
+static inline int wait_cmv_ack(struct uea_softc *sc)
+{
+	int ret = wait_event_timeout(sc->cmv_ack_wait,
+						   sc->cmv_ack, ACK_TIMEOUT);
+	sc->cmv_ack = 0;
+
+	if (ret < 0)
+		return ret;
+
+	return (ret == 0) ? -ETIMEDOUT : 0;
+
+}
+
+#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
+
+static int uea_request(struct uea_softc *sc,
+		u16 value, u16 index, u16 size, void *data)
+{
+	u8 *xfer_buff;
+	int ret = -ENOMEM;
+
+	xfer_buff = kmalloc(size, GFP_KERNEL);
+	if (!xfer_buff) {
+		uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
+		return ret;
+	}
+	memcpy(xfer_buff, data, size);
+
+	ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
+			      UCDC_SEND_ENCAPSULATED_COMMAND,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      value, index, xfer_buff, size, CTRL_TIMEOUT);
+
+	kfree(xfer_buff);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret);
+		return ret;
+	}
+
+	if (ret != size) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "usb_control_msg send only %d bytes (instead of %d)\n",
+		       ret, size);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int uea_cmv(struct uea_softc *sc,
+		u8 function, u32 address, u16 offset, u32 data)
+{
+	struct cmv cmv;
+	int ret;
+
+	/* we send a request, but we expect a reply */
+	sc->cmv_function = function | 0x2;
+	sc->cmv_idx++;
+	sc->cmv_address = address;
+	sc->cmv_offset = offset;
+
+	cmv.wPreamble = cpu_to_le16(PREAMBLE);
+	cmv.bDirection = HOSTTOMODEM;
+	cmv.bFunction = function;
+	cmv.wIndex = cpu_to_le16(sc->cmv_idx);
+	put_unaligned(cpu_to_le32(address), &cmv.dwSymbolicAddress);
+	cmv.wOffsetAddress = cpu_to_le16(offset);
+	put_unaligned(cpu_to_le32(data >> 16 | data << 16), &cmv.dwData);
+
+	ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
+	if (ret < 0)
+		return ret;
+	return wait_cmv_ack(sc);
+}
+
+static inline int uea_read_cmv(struct uea_softc *sc,
+		u32 address, u16 offset, u32 *data)
+{
+	int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTREAD),
+			  address, offset, 0);
+	if (ret < 0)
+		uea_err(INS_TO_USBDEV(sc),
+			"reading cmv failed with error %d\n", ret);
+	else
+	 	*data = sc->data;
+
+	return ret;
+}
+
+static inline int uea_write_cmv(struct uea_softc *sc,
+		u32 address, u16 offset, u32 data)
+{
+	int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTWRITE),
+			  address, offset, data);
+	if (ret < 0)
+		uea_err(INS_TO_USBDEV(sc),
+			"writing cmv failed with error %d\n", ret);
+
+	return ret;
+}
+
+/*
+ * Monitor the modem and update the stat
+ * return 0 if everything is ok
+ * return < 0 if an error occurs (-EAGAIN reboot needed)
+ */
+static int uea_stat(struct uea_softc *sc)
+{
+	u32 data;
+	int ret;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	data = sc->stats.phy.state;
+
+	ret = uea_read_cmv(sc, SA_STAT, 0, &sc->stats.phy.state);
+	if (ret < 0)
+		return ret;
+
+	switch (GET_STATUS(sc->stats.phy.state)) {
+	case 0:		/* not yet synchronized */
+		uea_dbg(INS_TO_USBDEV(sc),
+		       "modem not yet synchronized\n");
+		return 0;
+
+	case 1:		/* initialization */
+		uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+		return 0;
+
+	case 2:		/* operational */
+		uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n");
+		break;
+
+	case 3:		/* fail ... */
+		uea_info(INS_TO_USBDEV(sc), "modem synchronization failed\n");
+		return -EAGAIN;
+
+	case 4 ... 6:	/* test state */
+		uea_warn(INS_TO_USBDEV(sc),
+				"modem in test mode - not supported\n");
+		return -EAGAIN;
+
+	case 7:		/* fast-retain ... */
+		uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n");
+		return 0;
+	default:
+		uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n",
+			GET_STATUS(sc->stats.phy.state));
+		return -EAGAIN;
+	}
+
+	if (GET_STATUS(data) != 2) {
+		uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
+		uea_info(INS_TO_USBDEV(sc), "modem operational\n");
+
+		/* release the dsp firmware as it is not needed until
+		 * the next failure
+		 */
+		if (sc->dsp_firm) {
+			release_firmware(sc->dsp_firm);
+			sc->dsp_firm = NULL;
+		}
+
+		ret = uea_read_cmv(sc, SA_INFO, 10, &sc->stats.phy.firmid);
+		if (ret < 0)
+			return ret;
+		uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+				sc->stats.phy.firmid);
+	}
+
+	/* always update it as atm layer could not be init when we switch to
+	 * operational state
+	 */
+	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND);
+
+	/* wake up processes waiting for synchronization */
+	wake_up(&sc->sync_q);
+
+	ret = uea_read_cmv(sc, SA_DIAG, 2, &sc->stats.phy.flags);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.mflags |= sc->stats.phy.flags;
+
+	/* in case of a flags ( for example delineation LOSS (& 0x10)),
+	 * we check the status again in order to detect the failure earlier
+	 */
+	if (sc->stats.phy.flags) {
+		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n",
+		       sc->stats.phy.flags);
+		return 0;
+	}
+
+	ret = uea_read_cmv(sc, SA_RATE, 0, &data);
+	if (ret < 0)
+		return ret;
+
+	/* in bulk mode the modem have problem with high rate
+	 * changing internal timing could improve things, but the
+	 * value is misterious.
+	 * ADI930 don't support it (-EPIPE error).
+	 */
+	if (UEA_CHIP_VERSION(sc) != ADI930
+		    && sc->stats.phy.dsrate != (data >> 16) * 32) {
+		/* Original timming from ADI(used in windows driver)
+		 * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
+		 */
+		u16 timeout = (data <= 0x20ffff) ? 0 : 1;
+		ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
+		uea_info(INS_TO_USBDEV(sc),
+				"setting new timeout %d%s\n", timeout,
+				ret < 0?" failed":"");
+	}
+	sc->stats.phy.dsrate = (data >> 16) * 32;
+	sc->stats.phy.usrate = (data & 0xffff) * 32;
+	UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
+
+	ret = uea_read_cmv(sc, SA_DIAG, 23, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.dsattenuation = (data & 0xff) / 2;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 47, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.usattenuation = (data & 0xff) / 2;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 25, &sc->stats.phy.dsmargin);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 49, &sc->stats.phy.usmargin);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 51, &sc->stats.phy.rxflow);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 52, &sc->stats.phy.txflow);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 54, &sc->stats.phy.dsunc);
+	if (ret < 0)
+		return ret;
+
+	/* only for atu-c */
+	ret = uea_read_cmv(sc, SA_DIAG, 58, &sc->stats.phy.usunc);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_DIAG, 53, &sc->stats.phy.dscorr);
+	if (ret < 0)
+		return ret;
+
+	/* only for atu-c */
+	ret = uea_read_cmv(sc, SA_DIAG, 57, &sc->stats.phy.uscorr);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_INFO, 8, &sc->stats.phy.vidco);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv(sc, SA_INFO, 13, &sc->stats.phy.vidcpe);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int request_cmvs(struct uea_softc *sc,
+		 struct uea_cmvs **cmvs, const struct firmware **fw)
+{
+	int ret, size;
+	u8 *data;
+	char *file;
+	static char cmv_name[256] = FW_DIR;
+
+	if (cmv_file[sc->modem_index] == NULL) {
+		if (UEA_CHIP_VERSION(sc) == ADI930)
+			file = (IS_ISDN(sc)) ? "CMV9i.bin" : "CMV9p.bin";
+		else
+			file = (IS_ISDN(sc)) ? "CMVei.bin" : "CMVep.bin";
+	} else
+		file = cmv_file[sc->modem_index];
+
+	strcpy(cmv_name, FW_DIR);
+	strlcat(cmv_name, file, sizeof(cmv_name));
+
+	ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "requesting firmware %s failed with error %d\n",
+		       cmv_name, ret);
+		return ret;
+	}
+
+	data = (u8 *) (*fw)->data;
+	size = *data * sizeof(struct uea_cmvs) + 1;
+	if (size != (*fw)->size) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+		       cmv_name);
+		release_firmware(*fw);
+		return -EILSEQ;
+	}
+
+	*cmvs = (struct uea_cmvs *)(data + 1);
+	return *data;
+}
+
+/* Start boot post firmware modem:
+ * - send reset commands through usb control pipe
+ * - start workqueue for DSP loading
+ * - send CMV options to modem
+ */
+
+static int uea_start_reset(struct uea_softc *sc)
+{
+	u16 zero = 0;	/* ;-) */
+	int i, len, ret;
+	struct uea_cmvs *cmvs;
+	const struct firmware *cmvs_fw;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
+
+	sc->booting = 1;
+	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST);
+
+	/* reset statistics */
+	memset(&sc->stats, 0, sizeof(struct uea_stats));
+
+	/* tell the modem that we want to boot in IDMA mode */
+	uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
+	uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
+
+ 	/* enter reset mode */
+	uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
+
+	/* original driver use 200ms, but windows driver use 100ms */
+	msleep(100);
+
+	/* leave reset mode */
+	uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
+
+ 	/* clear tx and rx mailboxes */
+	uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
+	uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
+	uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+
+	msleep(1000);
+	sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
+	sc->booting = 0;
+
+	/* start loading DSP */
+	sc->pageno = 0;
+	sc->ovl = 0;
+	schedule_work(&sc->task);
+
+	/* wait for modem ready CMV */
+	ret = wait_cmv_ack(sc);
+	if (ret < 0)
+		return ret;
+
+	/* Enter in R-IDLE (cmv) until instructed otherwise */
+	ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	/* get options */
+ 	ret = len = request_cmvs(sc, &cmvs, &cmvs_fw);
+	if (ret < 0)
+		return ret;
+
+	/* send options */
+	for (i = 0; i < len; i++) {
+		ret = uea_write_cmv(sc, FW_GET_LONG(&cmvs[i].address),
+					FW_GET_WORD(&cmvs[i].offset),
+					FW_GET_LONG(&cmvs[i].data));
+		if (ret < 0)
+			goto out;
+	}
+	/* Enter in R-ACT-REQ */
+	ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
+out:
+	release_firmware(cmvs_fw);
+	sc->reset = 0;
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+/*
+ * In case of an error wait 1s before rebooting the modem
+ * if the modem don't request reboot (-EAGAIN).
+ * Monitor the modem every 1s.
+ */
+
+static int uea_kthread(void *data)
+{
+	struct uea_softc *sc = data;
+	int ret = -EAGAIN;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	while (!kthread_should_stop()) {
+		if (ret < 0 || sc->reset)
+			ret = uea_start_reset(sc);
+		if (!ret)
+			ret = uea_stat(sc);
+		if (ret != -EAGAIN)
+			msleep(1000);
+	}
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+/* Load second usb firmware for ADI930 chip */
+static int load_XILINX_firmware(struct uea_softc *sc)
+{
+	const struct firmware *fw_entry;
+	int ret, size, u, ln;
+	u8 *pfw, value;
+	char *fw_name = FW_DIR "930-fpga.bin";
+
+	uea_enters(INS_TO_USBDEV(sc));
+
+	ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev);
+	if (ret) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n",
+		       fw_name);
+		goto err0;
+	}
+
+	pfw = fw_entry->data;
+	size = fw_entry->size;
+	if (size != 0x577B) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+		       fw_name);
+		ret = -EILSEQ;
+		goto err1;
+	}
+	for (u = 0; u < size; u += ln) {
+		ln = min(size - u, 64);
+		ret = uea_request(sc, 0xe, 0, ln, pfw + u);
+		if (ret < 0) {
+			uea_err(INS_TO_USBDEV(sc),
+			       "elsa download data failed (%d)\n", ret);
+			goto err1;
+		}
+	}
+
+	/* finish to send the fpga
+	 */
+	ret = uea_request(sc, 0xe, 1, 0, NULL);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+				"elsa download data failed (%d)\n", ret);
+		goto err1;
+	}
+
+	/*
+	 * Tell the modem we finish : de-assert reset
+	 */
+	value = 0;
+	ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
+	if (ret < 0)
+		uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret);
+
+
+err1:
+	release_firmware(fw_entry);
+err0:
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
+{
+	uea_enters(INS_TO_USBDEV(sc));
+	if (le16_to_cpu(cmv->wPreamble) != PREAMBLE)
+		goto bad1;
+
+	if (cmv->bDirection != MODEMTOHOST)
+		goto bad1;
+
+	/* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
+	 * the first MEMACESS cmv. Ignore it...
+	 */
+	if (cmv->bFunction != sc->cmv_function) {
+		if (UEA_CHIP_VERSION(sc) == ADI930
+				&& cmv->bFunction ==  MAKEFUNCTION(2, 2)) {
+			cmv->wIndex = cpu_to_le16(sc->cmv_idx);
+			put_unaligned(cpu_to_le32(sc->cmv_address), &cmv->dwSymbolicAddress);
+			cmv->wOffsetAddress = cpu_to_le16(sc->cmv_offset);
+		}
+		else
+			goto bad2;
+	}
+
+	if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
+		wake_up_cmv_ack(sc);
+		return;
+	}
+
+	/* in case of MEMACCESS */
+	if (le16_to_cpu(cmv->wIndex) != sc->cmv_idx ||
+	    le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) !=
+	    sc->cmv_address
+	    || le16_to_cpu(cmv->wOffsetAddress) != sc->cmv_offset)
+		goto bad2;
+
+	sc->data = le32_to_cpu(get_unaligned(&cmv->dwData));
+	sc->data = sc->data << 16 | sc->data >> 16;
+
+	wake_up_cmv_ack(sc);
+	return;
+
+bad2:
+	uea_err(INS_TO_USBDEV(sc), "unexpected cmv received,"
+			"Function : %d, Subfunction : %d\n",
+			FUNCTION_TYPE(cmv->bFunction),
+			FUNCTION_SUBTYPE(cmv->bFunction));
+	return;
+
+bad1:
+	uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
+			"wPreamble %d, bDirection %d\n",
+			le16_to_cpu(cmv->wPreamble), cmv->bDirection);
+}
+
+/*
+ * interrupt handler
+ */
+static void uea_intr(struct urb *urb, struct pt_regs *regs)
+{
+	struct uea_softc *sc = (struct uea_softc *)urb->context;
+	struct intr_pkt *intr;
+	uea_enters(INS_TO_USBDEV(sc));
+
+	if (urb->status < 0) {
+		uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
+		       urb->status);
+		return;
+	}
+
+	intr = (struct intr_pkt *) urb->transfer_buffer;
+
+	/* device-to-host interrupt */
+	if (intr->bType != 0x08 || sc->booting) {
+		uea_err(INS_TO_USBDEV(sc), "wrong intr\n");
+		// rebooting ?
+		// sc->reset = 1;
+		goto resubmit;
+	}
+
+	switch (le16_to_cpu(intr->wInterrupt)) {
+	case INT_LOADSWAPPAGE:
+		sc->pageno = intr->bSwapPageNo;
+		sc->ovl = intr->bOvl >> 4 | intr->bOvl << 4;
+		schedule_work(&sc->task);
+		break;
+
+	case INT_INCOMINGCMV:
+		uea_dispatch_cmv(sc, &intr->u.s2.cmv);
+		break;
+
+	default:
+		uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n",
+		       le16_to_cpu(intr->wInterrupt));
+	}
+
+resubmit:
+	usb_submit_urb(sc->urb_int, GFP_ATOMIC);
+}
+
+/*
+ * Start the modem : init the data and start kernel thread
+ */
+static int uea_boot(struct uea_softc *sc)
+{
+	int ret;
+	struct intr_pkt *intr;
+
+	uea_enters(INS_TO_USBDEV(sc));
+
+	INIT_WORK(&sc->task, uea_load_page, sc);
+	init_waitqueue_head(&sc->sync_q);
+	init_waitqueue_head(&sc->cmv_ack_wait);
+
+	if (UEA_CHIP_VERSION(sc) == ADI930)
+		load_XILINX_firmware(sc);
+
+	intr = kmalloc(INTR_PKT_SIZE, GFP_KERNEL);
+	if (!intr) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "cannot allocate interrupt package\n");
+		uea_leaves(INS_TO_USBDEV(sc));
+		return -ENOMEM;
+	}
+
+	sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
+	if (!sc->urb_int) {
+		uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
+		goto err;
+	}
+
+	usb_fill_int_urb(sc->urb_int, sc->usb_dev,
+			 usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
+			 intr, INTR_PKT_SIZE, uea_intr, sc,
+			 sc->usb_dev->actconfig->interface[0]->altsetting[0].
+			 endpoint[0].desc.bInterval);
+
+	ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "urb submition failed with error %d\n", ret);
+		goto err1;
+	}
+
+	sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
+	if (sc->kthread == ERR_PTR(-ENOMEM)) {
+		uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
+		goto err2;
+	}
+
+	uea_leaves(INS_TO_USBDEV(sc));
+	return 0;
+
+err2:
+	usb_kill_urb(sc->urb_int);
+err1:
+	kfree(intr);
+err:
+	usb_free_urb(sc->urb_int);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return -ENOMEM;
+}
+
+/*
+ * Stop the modem : kill kernel thread and free data
+ */
+static void uea_stop(struct uea_softc *sc)
+{
+	int ret;
+	uea_enters(INS_TO_USBDEV(sc));
+	ret = kthread_stop(sc->kthread);
+	uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
+
+	/* stop any pending boot process */
+	flush_scheduled_work();
+
+	uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
+
+	usb_kill_urb(sc->urb_int);
+	kfree(sc->urb_int->transfer_buffer);
+	usb_free_urb(sc->urb_int);
+
+	if (sc->dsp_firm)
+		release_firmware(sc->dsp_firm);
+	uea_leaves(INS_TO_USBDEV(sc));
+}
+
+/* syfs interface */
+static struct uea_softc *dev_to_uea(struct device *dev)
+{
+	struct usb_interface *intf;
+	struct usbatm_data *usbatm;
+
+	intf = to_usb_interface(dev);
+	if (!intf)
+		return NULL;
+
+	usbatm = usb_get_intfdata(intf);
+	if (!usbatm)
+		return NULL;
+
+	return usbatm->driver_data;
+}
+
+static ssize_t read_status(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+
+	down(&uea_semaphore);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+	ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
+out:
+	up(&uea_semaphore);
+	return ret;
+}
+
+static ssize_t reboot(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+
+	down(&uea_semaphore);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+	sc->reset = 1;
+	ret = count;
+out:
+	up(&uea_semaphore);
+	return ret;
+}
+
+static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+
+static ssize_t read_human_status(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+
+	down(&uea_semaphore);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+
+	switch (GET_STATUS(sc->stats.phy.state)) {
+	case 0:
+		ret = sprintf(buf, "Modem is booting\n");
+		break;
+	case 1:
+		ret = sprintf(buf, "Modem is initializing\n");
+		break;
+	case 2:
+		ret = sprintf(buf, "Modem is operational\n");
+		break;
+	default:
+		ret = sprintf(buf, "Modem synchronization failed\n");
+		break;
+	}
+out:
+	up(&uea_semaphore);
+	return ret;
+}
+
+static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL);
+
+static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+
+	down(&uea_semaphore);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+
+	if (sc->stats.phy.flags & 0x0C00)
+		ret = sprintf(buf, "ERROR\n");
+	else if (sc->stats.phy.flags & 0x0030)
+		ret = sprintf(buf, "LOSS\n");
+	else
+		ret = sprintf(buf, "GOOD\n");
+out:
+	up(&uea_semaphore);
+	return ret;
+}
+
+static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+
+#define UEA_ATTR(name, reset) 					\
+								\
+static ssize_t read_##name(struct device *dev, 			\
+		struct device_attribute *attr, char *buf)	\
+{ 								\
+	int ret = -ENODEV; 					\
+	struct uea_softc *sc; 					\
+ 								\
+	down(&uea_semaphore); 					\
+	sc = dev_to_uea(dev);					\
+	if (!sc) 						\
+		goto out; 					\
+	ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name);	\
+	if (reset)						\
+		sc->stats.phy.name = 0;				\
+out: 								\
+	up(&uea_semaphore); 					\
+	return ret; 						\
+} 								\
+								\
+static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL)
+
+UEA_ATTR(mflags, 1);
+UEA_ATTR(vidcpe, 0);
+UEA_ATTR(usrate, 0);
+UEA_ATTR(dsrate, 0);
+UEA_ATTR(usattenuation, 0);
+UEA_ATTR(dsattenuation, 0);
+UEA_ATTR(usmargin, 0);
+UEA_ATTR(dsmargin, 0);
+UEA_ATTR(txflow, 0);
+UEA_ATTR(rxflow, 0);
+UEA_ATTR(uscorr, 0);
+UEA_ATTR(dscorr, 0);
+UEA_ATTR(usunc, 0);
+UEA_ATTR(dsunc, 0);
+
+/* Retrieve the device End System Identifier (MAC) */
+
+#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10)
+static int uea_getesi(struct uea_softc *sc, u_char * esi)
+{
+	unsigned char mac_str[2 * ETH_ALEN + 1];
+	int i;
+	if (usb_string
+	    (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str,
+	     sizeof(mac_str)) != 2 * ETH_ALEN)
+		return 1;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]);
+
+	return 0;
+}
+
+/* ATM stuff */
+static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
+{
+	struct uea_softc *sc = usbatm->driver_data;
+
+	return uea_getesi(sc, atm_dev->esi);
+}
+
+static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+	struct uea_softc *sc = usbatm->driver_data;
+
+	wait_event(sc->sync_q, IS_OPERATIONAL(sc));
+
+	return 0;
+
+}
+
+static int claim_interface(struct usb_device *usb_dev,
+			   struct usbatm_data *usbatm, int ifnum)
+{
+	int ret;
+	struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum);
+
+	if (!intf) {
+		uea_err(usb_dev, "interface %d not found\n", ifnum);
+		return -ENODEV;
+	}
+
+	ret = usb_driver_claim_interface(&uea_driver, intf, usbatm);
+	if (ret != 0)
+		uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum,
+		       ret);
+	return ret;
+}
+
+static void create_fs_entries(struct uea_softc *sc, struct usb_interface *intf)
+{
+	/* sysfs interface */
+	device_create_file(&intf->dev, &dev_attr_stat_status);
+	device_create_file(&intf->dev, &dev_attr_stat_mflags);
+	device_create_file(&intf->dev, &dev_attr_stat_human_status);
+	device_create_file(&intf->dev, &dev_attr_stat_delin);
+	device_create_file(&intf->dev, &dev_attr_stat_vidcpe);
+	device_create_file(&intf->dev, &dev_attr_stat_usrate);
+	device_create_file(&intf->dev, &dev_attr_stat_dsrate);
+	device_create_file(&intf->dev, &dev_attr_stat_usattenuation);
+	device_create_file(&intf->dev, &dev_attr_stat_dsattenuation);
+	device_create_file(&intf->dev, &dev_attr_stat_usmargin);
+	device_create_file(&intf->dev, &dev_attr_stat_dsmargin);
+	device_create_file(&intf->dev, &dev_attr_stat_txflow);
+	device_create_file(&intf->dev, &dev_attr_stat_rxflow);
+	device_create_file(&intf->dev, &dev_attr_stat_uscorr);
+	device_create_file(&intf->dev, &dev_attr_stat_dscorr);
+	device_create_file(&intf->dev, &dev_attr_stat_usunc);
+	device_create_file(&intf->dev, &dev_attr_stat_dsunc);
+}
+
+static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
+		   const struct usb_device_id *id, int *heavy)
+{
+	struct usb_device *usb = interface_to_usbdev(intf);
+	struct uea_softc *sc;
+	int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
+
+	uea_enters(usb);
+
+	/* interface 0 is for firmware/monitoring */
+	if (ifnum != UEA_INTR_IFACE_NO)
+		return -ENODEV;
+
+	*heavy = sync_wait[modem_index];
+
+	/* interface 1 is for outbound traffic */
+	ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
+	if (ret < 0)
+		return ret;
+
+	/* ADI930 has only 2 interfaces and inbound traffic
+	 * is on interface 1
+	 */
+	if (UEA_CHIP_VERSION(id) != ADI930) {
+		/* interface 2 is for inbound traffic */
+		ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
+		if (ret < 0)
+			return ret;
+	}
+
+	sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
+	if (!sc) {
+		uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n");
+		return -ENOMEM;
+	}
+
+	sc->usb_dev = usb;
+	usbatm->driver_data = sc;
+	sc->usbatm = usbatm;
+	sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
+	sc->driver_info = id->driver_info;
+
+	ret = uea_boot(sc);
+	if (ret < 0) {
+		kfree(sc);
+		return ret;
+	}
+
+	create_fs_entries(sc, intf);
+	return 0;
+}
+
+static void destroy_fs_entries(struct uea_softc *sc, struct usb_interface *intf)
+{
+	/* sysfs interface */
+	device_remove_file(&intf->dev, &dev_attr_stat_status);
+	device_remove_file(&intf->dev, &dev_attr_stat_mflags);
+	device_remove_file(&intf->dev, &dev_attr_stat_human_status);
+	device_remove_file(&intf->dev, &dev_attr_stat_delin);
+	device_remove_file(&intf->dev, &dev_attr_stat_vidcpe);
+	device_remove_file(&intf->dev, &dev_attr_stat_usrate);
+	device_remove_file(&intf->dev, &dev_attr_stat_dsrate);
+	device_remove_file(&intf->dev, &dev_attr_stat_usattenuation);
+	device_remove_file(&intf->dev, &dev_attr_stat_dsattenuation);
+	device_remove_file(&intf->dev, &dev_attr_stat_usmargin);
+	device_remove_file(&intf->dev, &dev_attr_stat_dsmargin);
+	device_remove_file(&intf->dev, &dev_attr_stat_txflow);
+	device_remove_file(&intf->dev, &dev_attr_stat_rxflow);
+	device_remove_file(&intf->dev, &dev_attr_stat_uscorr);
+	device_remove_file(&intf->dev, &dev_attr_stat_dscorr);
+	device_remove_file(&intf->dev, &dev_attr_stat_usunc);
+	device_remove_file(&intf->dev, &dev_attr_stat_dsunc);
+}
+
+static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+	struct uea_softc *sc = usbatm->driver_data;
+
+	destroy_fs_entries(sc, intf);
+	uea_stop(sc);
+	kfree(sc);
+}
+
+static struct usbatm_driver uea_usbatm_driver = {
+	.driver_name = "ueagle-atm",
+	.owner = THIS_MODULE,
+	.bind = uea_bind,
+	.atm_start = uea_atm_open,
+	.unbind = uea_unbind,
+	.heavy_init = uea_heavy,
+	.in = UEA_BULK_DATA_PIPE,
+	.out = UEA_BULK_DATA_PIPE,
+};
+
+static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *usb = interface_to_usbdev(intf);
+
+	uea_enters(usb);
+	uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) : %s\n",
+	       le16_to_cpu(usb->descriptor.idVendor),
+	       le16_to_cpu(usb->descriptor.idProduct),
+	       chip_name[UEA_CHIP_VERSION(id)]);
+
+	usb_reset_device(usb);
+
+	if (UEA_IS_PREFIRM(id))
+		return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
+
+	return usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+}
+
+static void uea_disconnect(struct usb_interface *intf)
+{
+	struct usb_device *usb = interface_to_usbdev(intf);
+	int ifnum = intf->altsetting->desc.bInterfaceNumber;
+	uea_enters(usb);
+
+	/* ADI930 has 2 interfaces and eagle 3 interfaces.
+	 * Pre-firmware device has one interface
+	 */
+	if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
+		down(&uea_semaphore);
+		usbatm_usb_disconnect(intf);
+		up(&uea_semaphore);
+		uea_info(usb, "ADSL device removed\n");
+	}
+
+	uea_leaves(usb);
+}
+
+/*
+ * List of supported VID/PID
+ */
+static const struct usb_device_id uea_ids[] = {
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_PREFIRM),	.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_PSTFIRM),	.driver_info = ADI930 | PSTFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_I_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_I_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_II_PID_PREFIRM),	.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_II_PID_PSTFIRM),	.driver_info = EAGLE_II | PSTFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_IIC_PID_PREFIRM),	.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_IIC_PID_PSTFIRM),	.driver_info = EAGLE_II | PSTFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_III_PID_PREFIRM),	.driver_info = EAGLE_III | PREFIRM},
+	{USB_DEVICE(EAGLE_VID,	EAGLE_III_PID_PSTFIRM),	.driver_info = EAGLE_III | PSTFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_A_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_A_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_B_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_B_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+	{}
+};
+
+/*
+ * USB driver descriptor
+ */
+static struct usb_driver uea_driver = {
+	.owner = THIS_MODULE,
+	.name = "ueagle-atm",
+	.id_table = uea_ids,
+	.probe = uea_probe,
+	.disconnect = uea_disconnect,
+};
+
+MODULE_DEVICE_TABLE(usb, uea_ids);
+
+/**
+ * uea_init - Initialize the module.
+ *      Register to USB subsystem
+ */
+static int __init uea_init(void)
+{
+	printk(KERN_INFO "[ueagle-atm] driver " EAGLEUSBVERSION " loaded\n");
+
+	usb_register(&uea_driver);
+
+	return 0;
+}
+
+module_init(uea_init);
+
+/**
+ * uea_exit  -  Destroy module
+ *    Deregister with USB subsystem
+ */
+static void __exit uea_exit(void)
+{
+	/*
+	 * This calls automatically the uea_disconnect method if necessary:
+	 */
+	usb_deregister(&uea_driver);
+
+	printk(KERN_INFO "[ueagle-atm] driver unloaded\n");
+}
+
+module_exit(uea_exit);
+
+MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka");
+MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
+MODULE_LICENSE("Dual BSD/GPL");