diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 0924e6e..3e9e999 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -5,3 +5,4 @@
   4 -> DViCO FusionHDTV5 Express                           [18ac:d500]
   5 -> Hauppauge WinTV-HVR1500Q                            [0070:7790,0070:7797]
   6 -> Hauppauge WinTV-HVR1500                             [0070:7710,0070:7717]
+  7 -> Hauppauge WinTV-HVR1200                             [0070:71d1]
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 1fd326f..ca5fbce 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -8,6 +8,7 @@
 	select VIDEO_TVEEPROM
 	select VIDEO_IR
 	select VIDEOBUF_DVB
+	select VIDEO_CX25840
 	select DVB_TUNER_MT2131 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
@@ -16,6 +17,7 @@
 	select TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
 	select DVB_TDA18271 if !DVB_FE_CUSTOMIZE
 	select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
+	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Conexant 23885 based
 	  TV cards.
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 77cd452..8cb32f3 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -130,6 +130,10 @@
 		.name		= "Hauppauge WinTV-HVR1500",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
+		.name		= "Hauppauge WinTV-HVR1200",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -181,6 +185,10 @@
 		.subvendor = 0x0070,
 		.subdevice = 0x7717,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x71d1,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -314,6 +322,17 @@
 		cx_set(GP0_IO, 0x00040004);
 		mdelay(20);
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+		/* GPIO-0 tda10048 demodulator reset */
+		/* GPIO-2 tda18271 tuner reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x00000005);
+		mdelay(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
 	}
 }
 
@@ -324,6 +343,7 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 		/* FIXME: Implement me */
 		break;
 	}
@@ -353,6 +373,7 @@
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -369,6 +390,7 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 1a720ab..18cd90c 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -36,6 +36,7 @@
 #include "tda18271.h"
 #include "lgdt330x.h"
 #include "xc5000.h"
+#include "tda10048.h"
 #include "dvb-pll.h"
 #include "tuner-xc2028.h"
 #include "tuner-xc2028-types.h"
@@ -107,6 +108,13 @@
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 };
 
+static struct tda10048_config hauppauge_hvr1200_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON
+};
+
 static struct s5h1409_config hauppauge_ezqam_config = {
 	.demod_address = 0x32 >> 1,
 	.output_mode   = S5H1409_SERIAL_OUTPUT,
@@ -178,6 +186,10 @@
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
+static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+	.gate    = TDA18271_GATE_ANALOG,
+};
+
 static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
 {
 	struct cx23885_tsport *port = ptr;
@@ -317,6 +329,20 @@
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+		i2c_bus = &dev->i2c_bus[0];
+		port->dvb.frontend = dvb_attach(tda10048_attach,
+			&hauppauge_hvr1200_config,
+			&i2c_bus->i2c_adap);
+		if (port->dvb.frontend != NULL) {
+			dvb_attach(tda829x_attach, port->dvb.frontend,
+				&dev->i2c_bus[1].i2c_adap, 0x42,
+				&tda829x_no_probe);
+			dvb_attach(tda18271_attach, port->dvb.frontend,
+				0x60, &dev->i2c_bus[1].i2c_adap,
+				&hauppauge_hvr1200_tuner_config);
+		}
+		break;
 	default:
 		printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
 		       dev->name);
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 8773a1f..85f9d5e 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -353,6 +353,7 @@
 };
 
 static char *i2c_devs[128] = {
+	[0x10 >> 1]   = "tda10048",
 	[ 0x1c >> 1 ] = "lgdt3303",
 	[ 0x86 >> 1 ] = "tda9887",
 	[ 0x32 >> 1 ] = "cx24227",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 7cb2179..5bbfe6f 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -59,6 +59,7 @@
 #define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP   4
 #define CX23885_BOARD_HAUPPAUGE_HVR1500Q       5
 #define CX23885_BOARD_HAUPPAUGE_HVR1500        6
+#define CX23885_BOARD_HAUPPAUGE_HVR1200        7
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\