Merge branch 'origin'
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 56e194f..8bea3fb 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -42,4 +42,4 @@
41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [0070:9800,0070:9802]
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
- 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50]
+ 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index cb3a59b..8a35259 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -1,7 +1,7 @@
0 -> UNKNOWN/GENERIC
1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138]
- 3 -> LifeView FlyVIDEO2000 [5168:0138]
+ 3 -> LifeView/Typhoon FlyVIDEO2000 [5168:0138,4e42:0138]
4 -> EMPRESS [1131:6752]
5 -> SKNet Monster TV [1131:4e85]
6 -> Tevion MD 9717
@@ -53,12 +53,12 @@
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
- 55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
+ 55 -> LifeView FlyDVB-T DUO [5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0351,1421:0370,1421:1370]
59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
- 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
+ 60 -> LifeView/Typhoon FlyDVB-T Duo Cardbus [5168:0502,4e42:0502]
61 -> Philips TOUGH DVB-T reference design [1131:2004]
62 -> Compro VideoMate TV Gold+II
63 -> Kworld Xpert TV PVR7134
diff --git a/MAINTAINERS b/MAINTAINERS
index 11d44da..a05aefd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -540,7 +540,8 @@
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
-M: mchehab@brturbo.com.br
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
@@ -837,11 +838,12 @@
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
-M: linux-dvb-maintainer@linuxtv.org
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
-S: Supported
+S: Maintained
EATA-DMA SCSI DRIVER
P: Michael Neuffer
@@ -2956,7 +2958,8 @@
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
-M: mchehab@brturbo.com.br
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2583a86..2963605 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -4,7 +4,7 @@
select DVB_STV0299
select DVB_MT352
select DVB_MT312
- select DVB_NXT2002
+ select DVB_NXT200X
select DVB_STV0297
select DVB_BCM3510
select DVB_LGDT330X
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 344a3c8..7d7e161 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -116,11 +116,9 @@
int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
-int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
/* from flexcop-eeprom.c */
/* the PCI part uses this call to get the MAC address, the USB part has its own */
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
index cf4ed1d..6f592bc 100644
--- a/drivers/media/dvb/b2c2/flexcop-dma.c
+++ b/drivers/media/dvb/b2c2/flexcop-dma.c
@@ -169,38 +169,3 @@
}
EXPORT_SYMBOL(flexcop_dma_config_timer);
-/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc,
- flexcop_dma_index_t no,
- int onoff)
-{
- flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
-
- deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
- if (no & FC_DMA_1)
- v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
-
- if (no & FC_DMA_2)
- v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
-
- fc->write_ibi_reg(fc,ctrl_208,v);
- deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
-
- return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
-
-int flexcop_dma_config_packet_count(struct flexcop_device *fc,
- flexcop_dma_index_t dma_idx,
- u8 packets)
-{
- flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
- flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-
- flexcop_dma_remap(fc,dma_idx,1);
-
- v.dma_0x4_remap.DMA_maxpackets = packets;
- fc->write_ibi_reg(fc,r,v);
- return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config_packet_count);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 0b940e1..390cc3a 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -9,7 +9,7 @@
#include "stv0299.h"
#include "mt352.h"
-#include "nxt2002.h"
+#include "nxt200x.h"
#include "bcm3510.h"
#include "stv0297.h"
#include "mt312.h"
@@ -343,9 +343,10 @@
.clock_polarity_flip = 1,
};
-static struct nxt2002_config samsung_tbmv_config = {
+static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
- .request_firmware = flexcop_fe_request_firmware,
+ .pll_address = 0xc2,
+ .pll_desc = &dvb_pll_samsung_tbmv,
};
static struct bcm3510_config air2pc_atsc_first_gen_config = {
@@ -505,7 +506,7 @@
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
} else
/* try the air atsc 2nd generation (nxt2002) */
- if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_AIR_ATSC2;
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
} else
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index 62282d8..167583b 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -36,14 +36,14 @@
/* bus parts have to decide if hw pid filtering is used or not. */
}
-const char *flexcop_revision_names[] = {
+static const char *flexcop_revision_names[] = {
"Unkown chip",
"FlexCopII",
"FlexCopIIb",
"FlexCopIII",
};
-const char *flexcop_device_names[] = {
+static const char *flexcop_device_names[] = {
"Unkown device",
"Air2PC/AirStar 2 DVB-T",
"Air2PC/AirStar 2 ATSC 1st generation",
@@ -54,7 +54,7 @@
"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
};
-const char *flexcop_bus_names[] = {
+static const char *flexcop_bus_names[] = {
"USB",
"PCI",
};
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 2f76eb3..9bc40bd 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -161,8 +161,10 @@
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
- deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
- jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
+ jiffies_to_usecs(jiffies - fc_pci->last_irq),
+ v.raw, (unsigned long long)cur_addr, cur_pos,
+ fc_pci->last_dma1_cur_pos);
fc_pci->last_irq = jiffies;
/* buffer end was reached, restarted from the beginning
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
index 3153f95..491f9bd 100644
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -16,8 +16,6 @@
FLEXCOP_III,
} flexcop_revision_t;
-extern const char *flexcop_revision_names[];
-
typedef enum {
FC_UNK = 0,
FC_AIR_DVB,
@@ -34,8 +32,6 @@
FC_PCI,
} flexcop_bus_t;
-extern const char *flexcop_device_names[];
-
/* FlexCop IBI Registers */
#if defined(__LITTLE_ENDIAN)
#include "flexcop_ibi_value_le.h"
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index a7fb06f..f140037 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -184,7 +184,7 @@
return 0;
}
-struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
+static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
{ 0xfe, 0x02, KEY_TV },
{ 0xfe, 0x0e, KEY_MP3 },
{ 0xfe, 0x1a, KEY_DVD },
@@ -273,7 +273,7 @@
return 0;
}
-struct cx22702_config cxusb_cx22702_config = {
+static struct cx22702_config cxusb_cx22702_config = {
.demod_address = 0x63,
.output_mode = CX22702_PARALLEL_OUTPUT,
@@ -282,13 +282,13 @@
.pll_set = dvb_usb_pll_set_i2c,
};
-struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt330x_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
};
-struct mt352_config cxusb_dee1601_config = {
+static struct mt352_config cxusb_dee1601_config = {
.demod_address = 0x0f,
.demod_init = cxusb_dee1601_demod_init,
.pll_set = dvb_usb_pll_set,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
index 8535895..9222b0a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -24,6 +24,9 @@
{ .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
};
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+ int *pos);
+
/*
* load a firmware packet to the device
*/
@@ -112,7 +115,8 @@
return ret;
}
-int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos)
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+ int *pos)
{
u8 *b = (u8 *) &fw->data[*pos];
int data_offs = 4;
@@ -142,5 +146,3 @@
return *pos;
}
-EXPORT_SYMBOL(dvb_usb_get_hexline);
-
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index dd56839..5e5d21a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -341,7 +341,6 @@
u8 data[255];
u8 chk;
};
-extern int dvb_usb_get_hexline(const struct firmware *, struct hexline *, int *);
extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
#endif
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index afa00fd..4a95eca 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -53,7 +53,8 @@
return ret;
}
-int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+static int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
{
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
@@ -88,7 +89,8 @@
return ret;
}
-int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec)
+static int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o,
+ int olen, u8 *i, int ilen, int msec)
{
u8 bout[olen+2];
u8 bin[ilen+1];
diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h
index a808d48..c2f97f9 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.h
+++ b/drivers/media/dvb/dvb-usb/vp702x.h
@@ -101,8 +101,6 @@
extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);
extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec);
-extern int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec);
extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
-extern int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
#endif
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index db3a8b4..f09e3da 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -166,18 +166,6 @@
comment "ATSC (North American/Korean Terresterial DTV) frontends"
depends on DVB_CORE
-config DVB_NXT2002
- tristate "Nxt2002 based"
- depends on DVB_CORE
- select FW_LOADER
- help
- An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
- This driver needs external firmware. Please use the command
- "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- download/extract it, and then copy it to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
-
config DVB_NXT200X
tristate "Nextwave NXT2002/NXT2004 based"
depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 615ec83..8f30146 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -25,7 +25,6 @@
obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
obj-$(CONFIG_DVB_TDA10021) += tda10021.o
obj-$(CONFIG_DVB_STV0297) += stv0297.o
-obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
obj-$(CONFIG_DVB_OR51211) += or51211.o
obj-$(CONFIG_DVB_OR51132) += or51132.o
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 1b9934e..4dcb605 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -326,11 +326,11 @@
};
EXPORT_SYMBOL(dvb_pll_tuv1236d);
-/* Samsung TBMV30111IN
+/* Samsung TBMV30111IN / TBMV30712IN1
* used in Air2PC ATSC - 2nd generation (nxt2002)
*/
-struct dvb_pll_desc dvb_pll_tbmv30111in = {
- .name = "Samsung TBMV30111IN",
+struct dvb_pll_desc dvb_pll_samsung_tbmv = {
+ .name = "Samsung TBMV30111IN / TBMV30712IN1",
.min = 54000000,
.max = 860000000,
.count = 6,
@@ -343,7 +343,7 @@
{ 999999999, 44000000, 166666, 0xfc, 0x02 },
}
};
-EXPORT_SYMBOL(dvb_pll_tbmv30111in);
+EXPORT_SYMBOL(dvb_pll_samsung_tbmv);
/*
* Philips SD1878 Tuner.
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index f682c09..bb8d4b4 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -38,7 +38,7 @@
extern struct dvb_pll_desc dvb_pll_tuv1236d;
extern struct dvb_pll_desc dvb_pll_tdhu2;
-extern struct dvb_pll_desc dvb_pll_tbmv30111in;
+extern struct dvb_pll_desc dvb_pll_samsung_tbmv;
extern struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261;
int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
deleted file mode 100644
index 4f263e6..0000000
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- Support for B2C2/BBTI Technisat Air2PC - ATSC
-
- Copyright (C) 2004 Taylor Jacob <rtjacob@earthlink.net>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
-#define CRC_CCIT_MASK 0x1021
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "nxt2002.h"
-
-struct nxt2002_state {
-
- struct i2c_adapter* i2c;
- struct dvb_frontend_ops ops;
- const struct nxt2002_config* config;
- struct dvb_frontend frontend;
-
- /* demodulator private data */
- u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
- do { \
- if (debug) printk(KERN_DEBUG "nxt2002: " args); \
- } while (0)
-
-static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len)
-{
- /* probbably a much better way or doing this */
- u8 buf2 [256],x;
- int err;
- struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
-
- buf2[0] = reg;
- for (x = 0 ; x < len ; x++)
- buf2[x+1] = buf[x];
-
- if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
- printk ("%s: i2c write error (addr %02x, err == %i)\n",
- __FUNCTION__, state->config->demod_address, err);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len)
-{
- u8 reg2 [] = { reg };
-
- struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
- int err;
-
- if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
- printk ("%s: i2c read error (addr %02x, err == %i)\n",
- __FUNCTION__, state->config->demod_address, err);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static u16 nxt2002_crc(u16 crc, u8 c)
-{
-
- u8 i;
- u16 input = (u16) c & 0xFF;
-
- input<<=8;
- for(i=0 ;i<8 ;i++) {
- if((crc ^ input) & 0x8000)
- crc=(crc<<1)^CRC_CCIT_MASK;
- else
- crc<<=1;
- input<<=1;
- }
- return crc;
-}
-
-static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
- u8 buf;
- dprintk("%s\n", __FUNCTION__);
-
- /* set multi register length */
- i2c_writebytes(state,0x34,&len,1);
-
- /* set mutli register register */
- i2c_writebytes(state,0x35,®,1);
-
- /* send the actual data */
- i2c_writebytes(state,0x36,data,len);
-
- /* toggle the multireg write bit*/
- buf = 0x02;
- i2c_writebytes(state,0x21,&buf,1);
-
- i2c_readbytes(state,0x21,&buf,1);
-
- if ((buf & 0x02) == 0)
- return 0;
-
- dprintk("Error writing multireg register %02X\n",reg);
-
- return 0;
-}
-
-static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
- u8 len2;
- dprintk("%s\n", __FUNCTION__);
-
- /* set multi register length */
- len2 = len & 0x80;
- i2c_writebytes(state,0x34,&len2,1);
-
- /* set mutli register register */
- i2c_writebytes(state,0x35,®,1);
-
- /* send the actual data */
- i2c_readbytes(state,reg,data,len);
-
- return 0;
-}
-
-static void nxt2002_microcontroller_stop (struct nxt2002_state* state)
-{
- u8 buf[2],counter = 0;
- dprintk("%s\n", __FUNCTION__);
-
- buf[0] = 0x80;
- i2c_writebytes(state,0x22,buf,1);
-
- while (counter < 20) {
- i2c_readbytes(state,0x31,buf,1);
- if (buf[0] & 0x40)
- return;
- msleep(10);
- counter++;
- }
-
- dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n");
- return;
-}
-
-static void nxt2002_microcontroller_start (struct nxt2002_state* state)
-{
- u8 buf;
- dprintk("%s\n", __FUNCTION__);
-
- buf = 0x00;
- i2c_writebytes(state,0x22,&buf,1);
-}
-
-static int nxt2002_writetuner (struct nxt2002_state* state, u8* data)
-{
- u8 buf,count = 0;
-
- dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]);
-
- dprintk("%s\n", __FUNCTION__);
- /* stop the micro first */
- nxt2002_microcontroller_stop(state);
-
- /* set the i2c transfer speed to the tuner */
- buf = 0x03;
- i2c_writebytes(state,0x20,&buf,1);
-
- /* setup to transfer 4 bytes via i2c */
- buf = 0x04;
- i2c_writebytes(state,0x34,&buf,1);
-
- /* write actual tuner bytes */
- i2c_writebytes(state,0x36,data,4);
-
- /* set tuner i2c address */
- buf = 0xC2;
- i2c_writebytes(state,0x35,&buf,1);
-
- /* write UC Opmode to begin transfer */
- buf = 0x80;
- i2c_writebytes(state,0x21,&buf,1);
-
- while (count < 20) {
- i2c_readbytes(state,0x21,&buf,1);
- if ((buf & 0x80)== 0x00)
- return 0;
- msleep(100);
- count++;
- }
-
- printk("nxt2002: timeout error writing tuner\n");
- return 0;
-}
-
-static void nxt2002_agc_reset(struct nxt2002_state* state)
-{
- u8 buf;
- dprintk("%s\n", __FUNCTION__);
-
- buf = 0x08;
- i2c_writebytes(state,0x08,&buf,1);
-
- buf = 0x00;
- i2c_writebytes(state,0x08,&buf,1);
-
- return;
-}
-
-static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 buf[256],written = 0,chunkpos = 0;
- u16 rambase,position,crc = 0;
-
- dprintk("%s\n", __FUNCTION__);
- dprintk("Firmware is %zu bytes\n",fw->size);
-
- /* Get the RAM base for this nxt2002 */
- i2c_readbytes(state,0x10,buf,1);
-
- if (buf[0] & 0x10)
- rambase = 0x1000;
- else
- rambase = 0x0000;
-
- dprintk("rambase on this nxt2002 is %04X\n",rambase);
-
- /* Hold the micro in reset while loading firmware */
- buf[0] = 0x80;
- i2c_writebytes(state,0x2B,buf,1);
-
- for (position = 0; position < fw->size ; position++) {
- if (written == 0) {
- crc = 0;
- chunkpos = 0x28;
- buf[0] = ((rambase + position) >> 8);
- buf[1] = (rambase + position) & 0xFF;
- buf[2] = 0x81;
- /* write starting address */
- i2c_writebytes(state,0x29,buf,3);
- }
- written++;
- chunkpos++;
-
- if ((written % 4) == 0)
- i2c_writebytes(state,chunkpos,&fw->data[position-3],4);
-
- crc = nxt2002_crc(crc,fw->data[position]);
-
- if ((written == 255) || (position+1 == fw->size)) {
- /* write remaining bytes of firmware */
- i2c_writebytes(state, chunkpos+4-(written %4),
- &fw->data[position-(written %4) + 1],
- written %4);
- buf[0] = crc << 8;
- buf[1] = crc & 0xFF;
-
- /* write crc */
- i2c_writebytes(state,0x2C,buf,2);
-
- /* do a read to stop things */
- i2c_readbytes(state,0x2A,buf,1);
-
- /* set transfer mode to complete */
- buf[0] = 0x80;
- i2c_writebytes(state,0x2B,buf,1);
-
- written = 0;
- }
- }
-
- printk ("done.\n");
- return 0;
-};
-
-static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
- struct dvb_frontend_parameters *p)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u32 freq = 0;
- u16 tunerfreq = 0;
- u8 buf[4];
-
- freq = 44000 + ( p->frequency / 1000 );
-
- dprintk("freq = %d p->frequency = %d\n",freq,p->frequency);
-
- tunerfreq = freq * 24/4000;
-
- buf[0] = (tunerfreq >> 8) & 0x7F;
- buf[1] = (tunerfreq & 0xFF);
-
- if (p->frequency <= 214000000) {
- buf[2] = 0x84 + (0x06 << 3);
- buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02;
- } else if (p->frequency <= 721000000) {
- buf[2] = 0x84 + (0x07 << 3);
- buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08;
- } else if (p->frequency <= 841000000) {
- buf[2] = 0x84 + (0x0E << 3);
- buf[3] = 0x08;
- } else {
- buf[2] = 0x84 + (0x0F << 3);
- buf[3] = 0x02;
- }
-
- /* write frequency information */
- nxt2002_writetuner(state,buf);
-
- /* reset the agc now that tuning has been completed */
- nxt2002_agc_reset(state);
-
- /* set target power level */
- switch (p->u.vsb.modulation) {
- case QAM_64:
- case QAM_256:
- buf[0] = 0x74;
- break;
- case VSB_8:
- buf[0] = 0x70;
- break;
- default:
- return -EINVAL;
- break;
- }
- i2c_writebytes(state,0x42,buf,1);
-
- /* configure sdm */
- buf[0] = 0x87;
- i2c_writebytes(state,0x57,buf,1);
-
- /* write sdm1 input */
- buf[0] = 0x10;
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x58,buf,2);
-
- /* write sdmx input */
- switch (p->u.vsb.modulation) {
- case QAM_64:
- buf[0] = 0x68;
- break;
- case QAM_256:
- buf[0] = 0x64;
- break;
- case VSB_8:
- buf[0] = 0x60;
- break;
- default:
- return -EINVAL;
- break;
- }
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x5C,buf,2);
-
- /* write adc power lpf fc */
- buf[0] = 0x05;
- i2c_writebytes(state,0x43,buf,1);
-
- /* write adc power lpf fc */
- buf[0] = 0x05;
- i2c_writebytes(state,0x43,buf,1);
-
- /* write accumulator2 input */
- buf[0] = 0x80;
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
- /* write kg1 */
- buf[0] = 0x00;
- i2c_writebytes(state,0x4D,buf,1);
-
- /* write sdm12 lpf fc */
- buf[0] = 0x44;
- i2c_writebytes(state,0x55,buf,1);
-
- /* write agc control reg */
- buf[0] = 0x04;
- i2c_writebytes(state,0x41,buf,1);
-
- /* write agc ucgp0 */
- switch (p->u.vsb.modulation) {
- case QAM_64:
- buf[0] = 0x02;
- break;
- case QAM_256:
- buf[0] = 0x03;
- break;
- case VSB_8:
- buf[0] = 0x00;
- break;
- default:
- return -EINVAL;
- break;
- }
- i2c_writebytes(state,0x30,buf,1);
-
- /* write agc control reg */
- buf[0] = 0x00;
- i2c_writebytes(state,0x41,buf,1);
-
- /* write accumulator2 input */
- buf[0] = 0x80;
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x49,buf,2);
- nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
- /* write agc control reg */
- buf[0] = 0x04;
- i2c_writebytes(state,0x41,buf,1);
-
- nxt2002_microcontroller_start(state);
-
- /* adjacent channel detection should be done here, but I don't
- have any stations with this need so I cannot test it */
-
- return 0;
-}
-
-static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 lock;
- i2c_readbytes(state,0x31,&lock,1);
-
- *status = 0;
- if (lock & 0x20) {
- *status |= FE_HAS_SIGNAL;
- *status |= FE_HAS_CARRIER;
- *status |= FE_HAS_VITERBI;
- *status |= FE_HAS_SYNC;
- *status |= FE_HAS_LOCK;
- }
- return 0;
-}
-
-static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[3];
-
- nxt2002_readreg_multibyte(state,0xE6,b,3);
-
- *ber = ((b[0] << 8) + b[1]) * 8;
-
- return 0;
-}
-
-static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[2];
- u16 temp = 0;
-
- /* setup to read cluster variance */
- b[0] = 0x00;
- i2c_writebytes(state,0xA1,b,1);
-
- /* get multreg val */
- nxt2002_readreg_multibyte(state,0xA6,b,2);
-
- temp = (b[0] << 8) | b[1];
- *strength = ((0x7FFF - temp) & 0x0FFF) * 16;
-
- return 0;
-}
-
-static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[2];
- u16 temp = 0, temp2;
- u32 snrdb = 0;
-
- /* setup to read cluster variance */
- b[0] = 0x00;
- i2c_writebytes(state,0xA1,b,1);
-
- /* get multreg val from 0xA6 */
- nxt2002_readreg_multibyte(state,0xA6,b,2);
-
- temp = (b[0] << 8) | b[1];
- temp2 = 0x7FFF - temp;
-
- /* snr will be in db */
- if (temp2 > 0x7F00)
- snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
- else if (temp2 > 0x7EC0)
- snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
- else if (temp2 > 0x7C00)
- snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
- else
- snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
-
- /* the value reported back from the frontend will be FFFF=32db 0000=0db */
-
- *snr = snrdb * (0xFFFF/32000);
-
- return 0;
-}
-
-static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[3];
-
- nxt2002_readreg_multibyte(state,0xE6,b,3);
- *ucblocks = b[2];
-
- return 0;
-}
-
-static int nxt2002_sleep(struct dvb_frontend* fe)
-{
- return 0;
-}
-
-static int nxt2002_init(struct dvb_frontend* fe)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- const struct firmware *fw;
- int ret;
- u8 buf[2];
-
- if (!state->initialised) {
- /* request the firmware, this will block until someone uploads it */
- printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
- ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE);
- printk("nxt2002: Waiting for firmware upload(2)...\n");
- if (ret) {
- printk("nxt2002: no firmware upload (timeout or file not found?)\n");
- return ret;
- }
-
- ret = nxt2002_load_firmware(fe, fw);
- if (ret) {
- printk("nxt2002: writing firmware to device failed\n");
- release_firmware(fw);
- return ret;
- }
- printk("nxt2002: firmware upload complete\n");
-
- /* Put the micro into reset */
- nxt2002_microcontroller_stop(state);
-
- /* ensure transfer is complete */
- buf[0]=0;
- i2c_writebytes(state,0x2B,buf,1);
-
- /* Put the micro into reset for real this time */
- nxt2002_microcontroller_stop(state);
-
- /* soft reset everything (agc,frontend,eq,fec)*/
- buf[0] = 0x0F;
- i2c_writebytes(state,0x08,buf,1);
- buf[0] = 0x00;
- i2c_writebytes(state,0x08,buf,1);
-
- /* write agc sdm configure */
- buf[0] = 0xF1;
- i2c_writebytes(state,0x57,buf,1);
-
- /* write mod output format */
- buf[0] = 0x20;
- i2c_writebytes(state,0x09,buf,1);
-
- /* write fec mpeg mode */
- buf[0] = 0x7E;
- buf[1] = 0x00;
- i2c_writebytes(state,0xE9,buf,2);
-
- /* write mux selection */
- buf[0] = 0x00;
- i2c_writebytes(state,0xCC,buf,1);
-
- state->initialised = 1;
- }
-
- return 0;
-}
-
-static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
- fesettings->min_delay_ms = 500;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
-}
-
-static void nxt2002_release(struct dvb_frontend* fe)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- kfree(state);
-}
-
-static struct dvb_frontend_ops nxt2002_ops;
-
-struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
- struct i2c_adapter* i2c)
-{
- struct nxt2002_state* state = NULL;
- u8 buf [] = {0,0,0,0,0};
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
- state->initialised = 0;
-
- /* Check the first 5 registers to ensure this a revision we can handle */
-
- i2c_readbytes(state, 0x00, buf, 5);
- if (buf[0] != 0x04) goto error; /* device id */
- if (buf[1] != 0x02) goto error; /* fab id */
- if (buf[2] != 0x11) goto error; /* month */
- if (buf[3] != 0x20) goto error; /* year msb */
- if (buf[4] != 0x00) goto error; /* year lsb */
-
- /* create dvb_frontend */
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-static struct dvb_frontend_ops nxt2002_ops = {
-
- .info = {
- .name = "Nextwave nxt2002 VSB/QAM frontend",
- .type = FE_ATSC,
- .frequency_min = 54000000,
- .frequency_max = 860000000,
- /* stepsize is just a guess */
- .frequency_stepsize = 166666,
- .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
- FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
- },
-
- .release = nxt2002_release,
-
- .init = nxt2002_init,
- .sleep = nxt2002_sleep,
-
- .set_frontend = nxt2002_setup_frontend_parameters,
- .get_tune_settings = nxt2002_get_tune_settings,
-
- .read_status = nxt2002_read_status,
- .read_ber = nxt2002_read_ber,
- .read_signal_strength = nxt2002_read_signal_strength,
- .read_snr = nxt2002_read_snr,
- .read_ucblocks = nxt2002_read_ucblocks,
-
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Taylor Jacob");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt2002_attach);
diff --git a/drivers/media/dvb/frontends/nxt2002.h b/drivers/media/dvb/frontends/nxt2002.h
deleted file mode 100644
index 462301f..0000000
--- a/drivers/media/dvb/frontends/nxt2002.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- Driver for the Nxt2002 demodulator
-*/
-
-#ifndef NXT2002_H
-#define NXT2002_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct nxt2002_config
-{
- /* the demodulator's i2c address */
- u8 demod_address;
-
- /* request firmware for device */
- int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-extern struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
- struct i2c_adapter* i2c);
-
-#endif // NXT2002_H
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 78d2b93..9e353539 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -1,9 +1,10 @@
/*
* Support for NXT2002 and NXT2004 - VSB/QAM
*
- * Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ * Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
+ * Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
* based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- * and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ * and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -614,7 +615,17 @@
/* write sdm1 input */
buf[0] = 0x10;
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x58, buf, 2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x58, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x58, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write sdmx input */
switch (p->u.vsb.modulation) {
@@ -632,7 +643,17 @@
break;
}
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x5C, buf, 2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x5C, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x5C, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write adc power lpf fc */
buf[0] = 0x05;
@@ -648,7 +669,17 @@
/* write accumulator2 input */
buf[0] = 0x80;
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x4B, buf, 2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x4B, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write kg1 */
buf[0] = 0x00;
@@ -714,8 +745,19 @@
/* write accumulator2 input */
buf[0] = 0x80;
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x49, buf,2);
- nxt200x_writebytes(state, 0x4B, buf,2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x49, buf, 2);
+ nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x49, buf, 2);
+ nxt200x_writebytes(state, 0x4B, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write agc control reg */
buf[0] = 0x04;
@@ -1199,7 +1241,7 @@
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob");
+MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(nxt200x_attach);
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
index 6ea30df..fafd25f 100644
--- a/drivers/media/dvb/ttpci/av7110.h
+++ b/drivers/media/dvb/ttpci/av7110.h
@@ -273,8 +273,6 @@
extern int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
u16 subpid, u16 pcrpid);
-extern int av7110_setup_irc_config (struct av7110 *av7110, u32 ir_config);
-
extern int av7110_ir_init(struct av7110 *av7110);
extern void av7110_ir_exit(struct av7110 *av7110);
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 9138132..617e4f6 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -155,6 +155,19 @@
}
+static int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config)
+{
+ int ret = 0;
+
+ dprintk(4, "%p\n", av7110);
+ if (av7110) {
+ ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config);
+ av7110->ir_config = ir_config;
+ }
+ return ret;
+}
+
+
static int av7110_ir_write_proc(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
@@ -187,19 +200,6 @@
}
-int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config)
-{
- int ret = 0;
-
- dprintk(4, "%p\n", av7110);
- if (av7110) {
- ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config);
- av7110->ir_config = ir_config;
- }
- return ret;
-}
-
-
static void ir_handler(struct av7110 *av7110, u32 ircom)
{
dprintk(4, "ircommand = %08x\n", ircom);
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 5330891..e99dfbb 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -32,6 +32,7 @@
config VIDEO_CX88_ALSA
tristate "ALSA DMA audio support"
depends on VIDEO_CX88 && SND && EXPERIMENTAL
+ select SND_PCM
---help---
This is a video4linux driver for direct (DMA) audio on
Conexant 2388x based TV cards.
@@ -48,6 +49,7 @@
default y
depends on VIDEO_CX88_DVB
select DVB_MT352
+ select VIDEO_CX88_VP3054
select DVB_OR51132
select DVB_CX22702
select DVB_LGDT330X
@@ -69,6 +71,16 @@
This adds DVB-T support for cards based on the
Connexant 2388x chip and the MT352 demodulator.
+config VIDEO_CX88_VP3054
+ tristate "VP-3054 Secondary I2C Bus Support"
+ default m
+ depends on DVB_MT352
+ ---help---
+ This adds DVB-T support for cards based on the
+ Connexant 2388x chip and the MT352 demodulator,
+ which also require support for the VP-3054
+ Secondary I2C bus, such at DNTV Live! DVB-T Pro.
+
config VIDEO_CX88_DVB_OR51132
bool "OR51132 ATSC Support"
default y
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index 6e5eaa2..2b90278 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -4,8 +4,9 @@
cx8802-objs := cx88-mpeg.o
obj-$(CONFIG_VIDEO_CX88) += cx88xx.o cx8800.o cx8802.o cx88-blackbird.o
-obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o cx88-vp3054-i2c.o
+obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o
obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o
+obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
@@ -18,6 +19,6 @@
extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1
extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1
extra-cflags-$(CONFIG_DVB_CX24123) += -DHAVE_CX24123=1
-extra-cflags-$(CONFIG_VIDEO_CX88_DVB)+= -DHAVE_VP3054_I2C=1
+extra-cflags-$(CONFIG_VIDEO_CX88_VP3054)+= -DHAVE_VP3054_I2C=1
EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index ad2f565..1bc9992 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1246,6 +1246,11 @@
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
},{
.subvendor = 0x18ac,
+ .subdevice = 0xdb54,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
+ /* Re-branded DViCO: DigitalNow DVB-T Dual */
+ },{
+ .subvendor = 0x18ac,
.subdevice = 0xdb11,
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
/* Re-branded DViCO: UltraView DVB-T Plus */
@@ -1293,6 +1298,7 @@
switch (tv.model)
{
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
+ case 34519: /* WinTV-PCI-FM */
case 90002: /* Nova-T-PCI (9002) */
case 92001: /* Nova-S-Plus (Video and IR) */
case 92002: /* Nova-S-Plus (Video and IR) */
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index dff3893..82f0c5f 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -253,7 +253,7 @@
if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0)
return ret;
else if (((u8) ret) & 0x01) {
- em28xx_warn ("AC97 command still being exectuted: not handled properly!\n");
+ em28xx_warn ("AC97 command still being executed: not handled properly!\n");
}
return 0;
}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index eea304f..94a14a2 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -6,6 +6,9 @@
Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Sascha Sommer <saschasommer@freenet.de>
+ Some parts based on SN9C10x PC Camera Controllers GPL driver made
+ by Luca Risolia <luca.risolia@studio.unibo.it>
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index c64718a..5a35d3b 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -136,7 +136,7 @@
},
[SAA7134_BOARD_FLYVIDEO2000] = {
/* "TC Wan" <tcwan@cs.usm.my> */
- .name = "LifeView FlyVIDEO2000",
+ .name = "LifeView/Typhoon FlyVIDEO2000",
.audio_clock = 0x00200000,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.radio_type = UNSET,
@@ -1884,44 +1884,38 @@
.gpio = 0x000,
},
},
- [SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS] = {
- .name = "Typhoon DVB-T Duo Digital/Analog Cardbus",
+ [SAA7134_BOARD_FLYDVBT_DUO_CARDBUS] = {
+ .name = "LifeView/Typhoon FlyDVB-T Duo Cardbus",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
- /* .gpiomask = 0xe000, */
+ .gpiomask = 0x00200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
- /* .gpio = 0x0000, */
+ .gpio = 0x200000, /* GPIO21=High for TV input */
.tv = 1,
},{
- .name = name_comp1, /* Composite signal on S-Video input */
- .vmux = 0,
- .amux = LINE2,
- /* .gpio = 0x4000, */
- },{
- .name = name_comp2, /* Composite input */
- .vmux = 3,
- .amux = LINE2,
- /* .gpio = 0x4000, */
- },{
.name = name_svideo, /* S-Video signal on S-Video input */
.vmux = 8,
.amux = LINE2,
- /* .gpio = 0x4000, */
+ },{
+ .name = name_comp1, /* Composite signal on S-Video input */
+ .vmux = 0,
+ .amux = LINE2,
+ },{
+ .name = name_comp2, /* Composite input */
+ .vmux = 3,
+ .amux = LINE2,
}},
.radio = {
.name = name_radio,
- .amux = LINE2,
- },
- .mute = {
- .name = name_mute,
- .amux = LINE1,
+ .amux = TV,
+ .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */
},
},
[SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII] = {
@@ -2701,6 +2695,12 @@
.driver_data = SAA7134_BOARD_FLYVIDEO2000,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x4e42, /* Typhoon */
+ .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */
+ .driver_data = SAA7134_BOARD_FLYVIDEO2000,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x0212, /* minipci, LR212 */
@@ -2935,7 +2935,7 @@
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x0502, /* Cardbus version */
- .driver_data = SAA7134_BOARD_FLYDVBTDUO,
+ .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -2980,12 +2980,12 @@
.subdevice = 0x1370, /* cardbus version */
.driver_data = SAA7134_BOARD_ADS_INSTANT_TV,
- },{ /* Typhoon DVB-T Duo Digital/Analog Cardbus */
+ },{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
- .subvendor = 0x4e42,
- .subdevice = 0x0502,
- .driver_data = SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS,
+ .subvendor = 0x4e42, /* Typhoon */
+ .subdevice = 0x0502, /* LifeView LR502 OEM */
+ .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -3206,8 +3206,7 @@
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000004);
break;
- case SAA7134_BOARD_FLYDVBTDUO:
- case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
+ case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
/* turn the fan on */
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 399f995..1a536e86 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -861,7 +861,7 @@
dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
&dev->i2c_adap);
break;
- case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
+ case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
&dev->i2c_adap);
break;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index e70eae8..3261d8b 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -185,7 +185,7 @@
#define SAA7134_BOARD_AVERMEDIA_GO_007_FM 57
#define SAA7134_BOARD_ADS_INSTANT_TV 58
#define SAA7134_BOARD_KWORLD_VSTREAM_XPERT 59
-#define SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS 60
+#define SAA7134_BOARD_FLYDVBT_DUO_CARDBUS 60
#define SAA7134_BOARD_PHILIPS_TOUGH 61
#define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII 62
#define SAA7134_BOARD_KWORLD_XPERT 63
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 54fc330..9d76926 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -2012,7 +2012,6 @@
{
struct saa7146 *saa = pci_get_drvdata(pdev);
- memset(saa, 0, sizeof(*saa));
saa->user = 0;
/* reset the saa7146 */
saawrite(0xffff0000, SAA7146_MC1);
@@ -2062,16 +2061,16 @@
}
if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) {
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
- goto errvid;
+ goto errfree;
}
if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) {
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
- goto erraud;
+ goto errfree;
}
/* allocate 81920 byte buffer for clipping */
if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr);
- goto errosd;
+ goto errfree;
}
/* setup clipping registers */
saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
@@ -2085,15 +2084,11 @@
I2CBusScan(saa);
return 0;
-errosd:
+errfree:
vfree(saa->osdbuf);
- saa->osdbuf = NULL;
-erraud:
vfree(saa->audbuf);
- saa->audbuf = NULL;
-errvid:
vfree(saa->vidbuf);
- saa->vidbuf = NULL;
+ saa->audbuf = saa->osdbuf = saa->vidbuf = NULL;
err:
return -ENOMEM;
}
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 5815649..7c71422 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -876,7 +876,7 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .id = -1, /* FIXME */
+ .id = I2C_DRIVERID_TDA9887,
.attach_adapter = tda9887_probe,
.detach_client = tda9887_detach,
.command = tda9887_command,
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 2995b22..873bf3d 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -216,6 +216,7 @@
buffer[3] = 0xa4;
i2c_master_send(c,buffer,4);
default_tuner_init(c);
+ break;
default:
default_tuner_init(c);
break;
@@ -448,7 +449,7 @@
printk("%02x ",buffer[i]);
printk("\n");
}
- /* TEA5767 autodetection code - only for addr = 0xc0 */
+ /* autodetection code based on the i2c addr */
if (!no_autodetect) {
switch (addr) {
case 0x42:
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 6d03b9b..c8e5ad0 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -390,6 +390,14 @@
chip_write(chip, TDA9840_SW, t);
}
+static int tda9840_checkit(struct CHIPSTATE *chip)
+{
+ int rc;
+ rc = chip_read(chip);
+ /* lower 5 bits should be 0 */
+ return ((rc & 0x1f) == 0) ? 1 : 0;
+}
+
/* ---------------------------------------------------------------------- */
/* audio chip descriptions - defines+functions for tda985x */
@@ -1264,6 +1272,7 @@
.addr_hi = I2C_TDA9840 >> 1,
.registers = 5,
+ .checkit = tda9840_checkit,
.getmode = tda9840_getmode,
.setmode = tda9840_setmode,
.checkmode = generic_checkmode,
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index fad9ea0..a6330a3 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -746,24 +746,27 @@
static inline void tvp5150_reset(struct i2c_client *c)
{
- u8 type, ver_656, msb_id, lsb_id, msb_rom, lsb_rom;
+ u8 msb_id, lsb_id, msb_rom, lsb_rom;
struct tvp5150 *decoder = i2c_get_clientdata(c);
- type=tvp5150_read(c,TVP5150_AUTOSW_MSK);
msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
- if (type==0xdc) {
- ver_656=tvp5150_read(c,TVP5150_REV_SELECT);
- tvp5150_info("tvp%02x%02xam1 detected 656 version is %d.\n",msb_id, lsb_id,ver_656);
- } else if (type==0xfc) {
- tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+ if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
+ tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
+
+ /* ITU-T BT.656.4 timing */
+ tvp5150_write(c,TVP5150_REV_SELECT,0);
} else {
- tvp5150_info("unknown tvp%02x%02x chip detected(%d).\n",msb_id,lsb_id,type);
+ if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
+ tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+ } else {
+ tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
+ tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
+ }
}
- tvp5150_info("Rom ver is %d.%d\n",msb_rom,lsb_rom);
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(c, tvp5150_init_default);
