/*
 *
 * Programmable Interrupt Controller functions for the Freescale MPC52xx.
 *
 * Copyright (C) 2008 Secret Lab Technologies Ltd.
 * Copyright (C) 2006 bplan GmbH
 * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
 * Copyright (C) 2003 Montavista Software, Inc
 *
 * Based on the code from the 2.4 kernel by
 * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2. This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 *
 */

/*
 * This is the device driver for the MPC5200 interrupt controller.
 *
 * hardware overview
 * -----------------
 * The MPC5200 interrupt controller groups the all interrupt sources into
 * three groups called 'critical', 'main', and 'peripheral'.  The critical
 * group has 3 irqs, External IRQ0, slice timer 0 irq, and wake from deep
 * sleep.  Main group include the other 3 external IRQs, slice timer 1, RTC,
 * gpios, and the general purpose timers.  Peripheral group contains the
 * remaining irq sources from all of the on-chip peripherals (PSCs, Ethernet,
 * USB, DMA, etc).
 *
 * virqs
 * -----
 * The Linux IRQ subsystem requires that each irq source be assigned a
 * system wide unique IRQ number starting at 1 (0 means no irq).  Since
 * systems can have multiple interrupt controllers, the virtual IRQ (virq)
 * infrastructure lets each interrupt controller to define a local set
 * of IRQ numbers and the virq infrastructure maps those numbers into
 * a unique range of the global IRQ# space.
 *
 * To define a range of virq numbers for this controller, this driver first
 * assigns a number to each of the irq groups (called the level 1 or L1
 * value).  Within each group individual irq sources are also assigned a
 * number, as defined by the MPC5200 user guide, and refers to it as the
 * level 2 or L2 value.  The virq number is determined by shifting up the
 * L1 value by MPC52xx_IRQ_L1_OFFSET and ORing it with the L2 value.
 *
 * For example, the TMR0 interrupt is irq 9 in the main group.  The
 * virq for TMR0 is calculated by ((1 << MPC52xx_IRQ_L1_OFFSET) | 9).
 *
 * The observant reader will also notice that this driver defines a 4th
 * interrupt group called 'bestcomm'.  The bestcomm group isn't physically
 * part of the MPC5200 interrupt controller, but it is used here to assign
 * a separate virq number for each bestcomm task (since any of the 16
 * bestcomm tasks can cause the bestcomm interrupt to be raised).  When a
 * bestcomm interrupt occurs (peripheral group, irq 0) this driver determines
 * which task needs servicing and returns the irq number for that task.  This
 * allows drivers which use bestcomm to define their own interrupt handlers.
 *
 * irq_chip structures
 * -------------------
 * For actually manipulating IRQs (masking, enabling, clearing, etc) this
 * driver defines four separate 'irq_chip' structures, one for the main
 * group, one for the peripherals group, one for the bestcomm group and one
 * for external interrupts.  The irq_chip structures provide the hooks needed
 * to manipulate each IRQ source, and since each group is has a separate set
 * of registers for controlling the irq, it makes sense to divide up the
 * hooks along those lines.
 *
 * You'll notice that there is not an irq_chip for the critical group and
 * you'll also notice that there is an irq_chip defined for external
 * interrupts even though there is no external interrupt group.  The reason
 * for this is that the four external interrupts are all managed with the same
 * register even though one of the external IRQs is in the critical group and
 * the other three are in the main group.  For this reason it makes sense for
 * the 4 external irqs to be managed using a separate set of hooks.  The
 * reason there is no crit irq_chip is that of the 3 irqs in the critical
 * group, only external interrupt is actually support at this time by this
 * driver and since external interrupt is the only one used, it can just
 * be directed to make use of the external irq irq_chip.
 *
 * device tree bindings
 * --------------------
 * The device tree bindings for this controller reflect the two level
 * organization of irqs in the device.  #interrupt-cells = <3> where the
 * first cell is the group number [0..3], the second cell is the irq
 * number in the group, and the third cell is the sense type (level/edge).
 * For reference, the following is a list of the interrupt property values
 * associated with external interrupt sources on the MPC5200 (just because
 * it is non-obvious to determine what the interrupts property should be
 * when reading the mpc5200 manual and it is a frequently asked question).
 *
 * External interrupts:
 * <0 0 n>	external irq0, n is sense	(n=0: level high,
 * <1 1 n>	external irq1, n is sense	 n=1: edge rising,
 * <1 2 n>	external irq2, n is sense	 n=2: edge falling,
 * <1 3 n>	external irq3, n is sense	 n=3: level low)
 */
#undef DEBUG

#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/mpc52xx.h>

/* HW IRQ mapping */
#define MPC52xx_IRQ_L1_CRIT	(0)
#define MPC52xx_IRQ_L1_MAIN	(1)
#define MPC52xx_IRQ_L1_PERP	(2)
#define MPC52xx_IRQ_L1_SDMA	(3)

#define MPC52xx_IRQ_L1_OFFSET	(6)
#define MPC52xx_IRQ_L1_MASK	(0x00c0)
#define MPC52xx_IRQ_L2_MASK	(0x003f)

#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0)


/* MPC5200 device tree match tables */
static struct of_device_id mpc52xx_pic_ids[] __initdata = {
	{ .compatible = "fsl,mpc5200-pic", },
	{ .compatible = "mpc5200-pic", },
	{}
};
static struct of_device_id mpc52xx_sdma_ids[] __initdata = {
	{ .compatible = "fsl,mpc5200-bestcomm", },
	{ .compatible = "mpc5200-bestcomm", },
	{}
};

static struct mpc52xx_intr __iomem *intr;
static struct mpc52xx_sdma __iomem *sdma;
static struct irq_host *mpc52xx_irqhost = NULL;

static unsigned char mpc52xx_map_senses[4] = {
	IRQ_TYPE_LEVEL_HIGH,
	IRQ_TYPE_EDGE_RISING,
	IRQ_TYPE_EDGE_FALLING,
	IRQ_TYPE_LEVEL_LOW,
};

/* Utility functions */
static inline void io_be_setbit(u32 __iomem *addr, int bitno)
{
	out_be32(addr, in_be32(addr) | (1 << bitno));
}

static inline void io_be_clrbit(u32 __iomem *addr, int bitno)
{
	out_be32(addr, in_be32(addr) & ~(1 << bitno));
}

/*
 * IRQ[0-3] interrupt irq_chip
 */
static void mpc52xx_extirq_mask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_clrbit(&intr->ctrl, 11 - l2irq);
}

static void mpc52xx_extirq_unmask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_setbit(&intr->ctrl, 11 - l2irq);
}

static void mpc52xx_extirq_ack(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_setbit(&intr->ctrl, 27-l2irq);
}

static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
{
	struct irq_desc *desc = get_irq_desc(virq);
	u32 ctrl_reg, type;
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type);

	switch (flow_type) {
	case IRQF_TRIGGER_HIGH:
		type = 0;
		break;
	case IRQF_TRIGGER_RISING:
		type = 1;
		break;
	case IRQF_TRIGGER_FALLING:
		type = 2;
		break;
	case IRQF_TRIGGER_LOW:
		type = 3;
		break;
	default:
		type = 0;
	}

	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
		desc->status |= IRQ_LEVEL;

	ctrl_reg = in_be32(&intr->ctrl);
	ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
	ctrl_reg |= (type << (22 - (l2irq * 2)));
	out_be32(&intr->ctrl, ctrl_reg);

	return 0;
}

static struct irq_chip mpc52xx_extirq_irqchip = {
	.typename = "MPC52xx External",
	.mask = mpc52xx_extirq_mask,
	.unmask = mpc52xx_extirq_unmask,
	.ack = mpc52xx_extirq_ack,
	.set_type = mpc52xx_extirq_set_type,
};

/*
 * Main interrupt irq_chip
 */
static void mpc52xx_main_mask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_setbit(&intr->main_mask, 16 - l2irq);
}

static void mpc52xx_main_unmask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_clrbit(&intr->main_mask, 16 - l2irq);
}

static struct irq_chip mpc52xx_main_irqchip = {
	.typename = "MPC52xx Main",
	.mask = mpc52xx_main_mask,
	.mask_ack = mpc52xx_main_mask,
	.unmask = mpc52xx_main_unmask,
};

/*
 * Peripherals interrupt irq_chip
 */
static void mpc52xx_periph_mask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_setbit(&intr->per_mask, 31 - l2irq);
}

static void mpc52xx_periph_unmask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_clrbit(&intr->per_mask, 31 - l2irq);
}

static struct irq_chip mpc52xx_periph_irqchip = {
	.typename = "MPC52xx Peripherals",
	.mask = mpc52xx_periph_mask,
	.mask_ack = mpc52xx_periph_mask,
	.unmask = mpc52xx_periph_unmask,
};

/*
 * SDMA interrupt irq_chip
 */
static void mpc52xx_sdma_mask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_setbit(&sdma->IntMask, l2irq);
}

static void mpc52xx_sdma_unmask(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	io_be_clrbit(&sdma->IntMask, l2irq);
}

static void mpc52xx_sdma_ack(unsigned int virq)
{
	int irq;
	int l2irq;

	irq = irq_map[virq].hwirq;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);

	out_be32(&sdma->IntPend, 1 << l2irq);
}

static struct irq_chip mpc52xx_sdma_irqchip = {
	.typename = "MPC52xx SDMA",
	.mask = mpc52xx_sdma_mask,
	.unmask = mpc52xx_sdma_unmask,
	.ack = mpc52xx_sdma_ack,
};

/**
 * mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property
 */
static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
				 u32 *intspec, unsigned int intsize,
				 irq_hw_number_t *out_hwirq,
				 unsigned int *out_flags)
{
	int intrvect_l1;
	int intrvect_l2;
	int intrvect_type;
	int intrvect_linux;

	if (intsize != 3)
		return -1;

	intrvect_l1 = (int)intspec[0];
	intrvect_l2 = (int)intspec[1];
	intrvect_type = (int)intspec[2];

	intrvect_linux = (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) &
			 MPC52xx_IRQ_L1_MASK;
	intrvect_linux |= intrvect_l2 & MPC52xx_IRQ_L2_MASK;

	pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1,
		 intrvect_l2);

	*out_hwirq = intrvect_linux;
	*out_flags = mpc52xx_map_senses[intrvect_type];

	return 0;
}

/**
 * mpc52xx_irqx_gettype - determine the IRQ sense type (level/edge)
 *
 * Only external IRQs need this.
 */
static int mpc52xx_irqx_gettype(int irq)
{
	int type;
	u32 ctrl_reg;

	ctrl_reg = in_be32(&intr->ctrl);
	type = (ctrl_reg >> (22 - irq * 2)) & 0x3;

	return mpc52xx_map_senses[type];
}

/**
 * mpc52xx_irqhost_map - Hook to map from virq to an irq_chip structure
 */
static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq,
			       irq_hw_number_t irq)
{
	int l1irq;
	int l2irq;
	struct irq_chip *good_irqchip;
	void *good_handle;
	int type;

	l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
	l2irq = irq & MPC52xx_IRQ_L2_MASK;

	/*
	 * Most of ours IRQs will be level low
	 * Only external IRQs on some platform may be others
	 */
	type = IRQ_TYPE_LEVEL_LOW;

	switch (l1irq) {
	case MPC52xx_IRQ_L1_CRIT:
		pr_debug("%s: Critical. l2=%x\n", __func__, l2irq);

		BUG_ON(l2irq != 0);

		type = mpc52xx_irqx_gettype(l2irq);
		good_irqchip = &mpc52xx_extirq_irqchip;
		break;

	case MPC52xx_IRQ_L1_MAIN:
		pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq);

		if ((l2irq >= 1) && (l2irq <= 3)) {
			type = mpc52xx_irqx_gettype(l2irq);
			good_irqchip = &mpc52xx_extirq_irqchip;
		} else {
			good_irqchip = &mpc52xx_main_irqchip;
		}
		break;

	case MPC52xx_IRQ_L1_PERP:
		pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq);
		good_irqchip = &mpc52xx_periph_irqchip;
		break;

	case MPC52xx_IRQ_L1_SDMA:
		pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq);
		good_irqchip = &mpc52xx_sdma_irqchip;
		break;

	default:
		pr_err("%s: invalid virq requested (0x%x)\n", __func__, virq);
		return -EINVAL;
	}

	switch (type) {
	case IRQ_TYPE_EDGE_FALLING:
	case IRQ_TYPE_EDGE_RISING:
		good_handle = handle_edge_irq;
		break;
	default:
		good_handle = handle_level_irq;
	}

	set_irq_chip_and_handler(virq, good_irqchip, good_handle);

	pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq,
		 (int)irq, type);

	return 0;
}

static struct irq_host_ops mpc52xx_irqhost_ops = {
	.xlate = mpc52xx_irqhost_xlate,
	.map = mpc52xx_irqhost_map,
};

/**
 * mpc52xx_init_irq - Initialize and register with the virq subsystem
 *
 * Hook for setting up IRQs on an mpc5200 system.  A pointer to this function
 * is to be put into the machine definition structure.
 *
 * This function searches the device tree for an MPC5200 interrupt controller,
 * initializes it, and registers it with the virq subsystem.
 */
void __init mpc52xx_init_irq(void)
{
	u32 intr_ctrl;
	struct device_node *picnode;
	struct device_node *np;

	/* Remap the necessary zones */
	picnode = of_find_matching_node(NULL, mpc52xx_pic_ids);
	intr = of_iomap(picnode, 0);
	if (!intr)
		panic(__FILE__	": find_and_map failed on 'mpc5200-pic'. "
				"Check node !");

	np = of_find_matching_node(NULL, mpc52xx_sdma_ids);
	sdma = of_iomap(np, 0);
	of_node_put(np);
	if (!sdma)
		panic(__FILE__	": find_and_map failed on 'mpc5200-bestcomm'. "
				"Check node !");

	/* Disable all interrupt sources. */
	out_be32(&sdma->IntPend, 0xffffffff);	/* 1 means clear pending */
	out_be32(&sdma->IntMask, 0xffffffff);	/* 1 means disabled */
	out_be32(&intr->per_mask, 0x7ffffc00);	/* 1 means disabled */
	out_be32(&intr->main_mask, 0x00010fff);	/* 1 means disabled */
	intr_ctrl = in_be32(&intr->ctrl);
	intr_ctrl &= 0x00ff0000;	/* Keeps IRQ[0-3] config */
	intr_ctrl |=	0x0f000000 |	/* clear IRQ 0-3 */
			0x00001000 |	/* MEE master external enable */
			0x00000000 |	/* 0 means disable IRQ 0-3 */
			0x00000001;	/* CEb route critical normally */
	out_be32(&intr->ctrl, intr_ctrl);

	/* Zero a bunch of the priority settings. */
	out_be32(&intr->per_pri1, 0);
	out_be32(&intr->per_pri2, 0);
	out_be32(&intr->per_pri3, 0);
	out_be32(&intr->main_pri1, 0);
	out_be32(&intr->main_pri2, 0);

	/*
	 * As last step, add an irq host to translate the real
	 * hw irq information provided by the ofw to linux virq
	 */
	mpc52xx_irqhost = irq_alloc_host(picnode, IRQ_HOST_MAP_LINEAR,
	                                 MPC52xx_IRQ_HIGHTESTHWIRQ,
	                                 &mpc52xx_irqhost_ops, -1);

	if (!mpc52xx_irqhost)
		panic(__FILE__ ": Cannot allocate the IRQ host\n");

	irq_set_default_host(mpc52xx_irqhost);

	pr_info("MPC52xx PIC is up and running!\n");
}

/**
 * mpc52xx_get_irq - Get pending interrupt number hook function
 *
 * Called by the interupt handler to determine what IRQ handler needs to be
 * executed.
 *
 * Status of pending interrupts is determined by reading the encoded status
 * register.  The encoded status register has three fields; one for each of the
 * types of interrupts defined by the controller - 'critical', 'main' and
 * 'peripheral'.  This function reads the status register and returns the IRQ
 * number associated with the highest priority pending interrupt.  'Critical'
 * interrupts have the highest priority, followed by 'main' interrupts, and
 * then 'peripheral'.
 *
 * The mpc5200 interrupt controller can be configured to boost the priority
 * of individual 'peripheral' interrupts.  If this is the case then a special
 * value will appear in either the crit or main fields indicating a high
 * or medium priority peripheral irq has occurred.
 *
 * This function checks each of the 3 irq request fields and returns the
 * first pending interrupt that it finds.
 *
 * This function also identifies a 4th type of interrupt; 'bestcomm'.  Each
 * bestcomm DMA task can raise the bestcomm peripheral interrupt.  When this
 * occurs at task-specific IRQ# is decoded so that each task can have its
 * own IRQ handler.
 */
unsigned int mpc52xx_get_irq(void)
{
	u32 status;
	int irq = NO_IRQ_IGNORE;

	status = in_be32(&intr->enc_status);
	if (status & 0x00000400) {	/* critical */
		irq = (status >> 8) & 0x3;
		if (irq == 2)	/* high priority peripheral */
			goto peripheral;
		irq |= (MPC52xx_IRQ_L1_CRIT << MPC52xx_IRQ_L1_OFFSET);
	} else if (status & 0x00200000) {	/* main */
		irq = (status >> 16) & 0x1f;
		if (irq == 4)	/* low priority peripheral */
			goto peripheral;
		irq |= (MPC52xx_IRQ_L1_MAIN << MPC52xx_IRQ_L1_OFFSET);
	} else if (status & 0x20000000) {	/* peripheral */
	      peripheral:
		irq = (status >> 24) & 0x1f;
		if (irq == 0) {	/* bestcomm */
			status = in_be32(&sdma->IntPend);
			irq = ffs(status) - 1;
			irq |= (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET);
		} else {
			irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET);
		}
	}

	pr_debug("%s: irq=%x. virq=%d\n", __func__, irq,
		 irq_linear_revmap(mpc52xx_irqhost, irq));

	return irq_linear_revmap(mpc52xx_irqhost, irq);
}