/*
 * File:         arch/blackfin/mach-bf533/head.S
 * Based on:
 * Author:       Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
 *
 * Created:      1998
 * Description:  bf533 startup file
 *
 * Modified:
 *               Copyright 2004-2006 Analog Devices Inc.
 *
 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see the file COPYING, or write
 * to the Free Software Foundation, Inc.,
 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
#if CONFIG_DEBUG_KERNEL_START
#include <asm/mach-common/def_LPBlackfin.h>
#endif

.global __rambase
.global __ramstart
.global __ramend
.extern ___bss_stop
.extern ___bss_start
.extern _bf53x_relocate_l1_mem

#define INITIAL_STACK	0xFFB01000

__INIT

ENTRY(__start)
	/* R0: argument of command line string, passed from uboot, save it */
	R7 = R0;
	/* Set the SYSCFG register:
	 * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
	 */
	R0 = 0x36;
	SYSCFG = R0;
	R0 = 0;

	/* Clear Out All the data and pointer Registers */
	R1 = R0;
	R2 = R0;
	R3 = R0;
	R4 = R0;
	R5 = R0;
	R6 = R0;

	P0 = R0;
	P1 = R0;
	P2 = R0;
	P3 = R0;
	P4 = R0;
	P5 = R0;

	LC0 = r0;
	LC1 = r0;
	L0 = r0;
	L1 = r0;
	L2 = r0;
	L3 = r0;

	/* Clear Out All the DAG Registers */
	B0 = r0;
	B1 = r0;
	B2 = r0;
	B3 = r0;

	I0 = r0;
	I1 = r0;
	I2 = r0;
	I3 = r0;

	M0 = r0;
	M1 = r0;
	M2 = r0;
	M3 = r0;

	trace_buffer_start(p0,r0);
	P0 = R1;
	R0 = R1;

#if CONFIG_DEBUG_KERNEL_START

/*
 * Set up a temporary Event Vector Table, so if something bad happens before
 * the kernel is fully started, it doesn't vector off into the bootloaders
 * table
 */
	P0.l = lo(EVT2);
	P0.h = hi(EVT2);
	P1.l = lo(EVT15);
	P1.h = hi(EVT15);
	P2.l = debug_kernel_start_trap;
	P2.h = debug_kernel_start_trap;

	RTS = P2;
	RTI = P2;
	RTX = P2;
	RTN = P2;
	RTE = P2;

.Lfill_temp_vector_table:
	[P0++] = P2;	/* Core Event Vector Table */
	CC = P0 == P1;
	if !CC JUMP .Lfill_temp_vector_table
	P0 = r0;
	P1 = r0;
	P2 = r0;

#endif

	p0.h = hi(FIO_MASKA_C);
	p0.l = lo(FIO_MASKA_C);
	r0 = 0xFFFF(Z);
	w[p0] = r0.L;	/* Disable all interrupts */
	ssync;

	p0.h = hi(FIO_MASKB_C);
	p0.l = lo(FIO_MASKB_C);
	r0 = 0xFFFF(Z);
	w[p0] = r0.L;	/* Disable all interrupts */
	ssync;

	/* Turn off the icache */
	p0.l = (IMEM_CONTROL & 0xFFFF);
	p0.h = (IMEM_CONTROL >> 16);
	R1 = [p0];
	R0 = ~ENICPLB;
	R0 = R0 & R1;

	/* Anomaly 05000125 */
#ifdef ANOMALY_05000125
	CLI R2;
	SSYNC;
#endif
	[p0] = R0;
	SSYNC;
#ifdef ANOMALY_05000125
	STI R2;
#endif

	/* Turn off the dcache */
	p0.l = (DMEM_CONTROL & 0xFFFF);
	p0.h = (DMEM_CONTROL >> 16);
	R1 = [p0];
	R0 = ~ENDCPLB;
	R0 = R0 & R1;

	/* Anomaly 05000125 */
#ifdef ANOMALY_05000125
	CLI R2;
	SSYNC;
#endif
	[p0] = R0;
	SSYNC;
#ifdef ANOMALY_05000125
	STI R2;
#endif

	/* Initialise UART - when booting from u-boot, the UART is not disabled
	 * so if we dont initalize here, our serial console gets hosed */
	p0.h = hi(UART_LCR);
	p0.l = lo(UART_LCR);
	r0 = 0x0(Z);
	w[p0] = r0.L;	/* To enable DLL writes */
	ssync;

	p0.h = hi(UART_DLL);
	p0.l = lo(UART_DLL);
	r0 = 0x0(Z);
	w[p0] = r0.L;
	ssync;

	p0.h = hi(UART_DLH);
	p0.l = lo(UART_DLH);
	r0 = 0x00(Z);
	w[p0] = r0.L;
	ssync;

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x0(Z);
	w[p0] = r0.L;	/* To enable UART clock */
	ssync;

	/* Initialize stack pointer */
	sp.l = lo(INITIAL_STACK);
	sp.h = hi(INITIAL_STACK);
	fp = sp;
	usp = sp;

	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
	call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
	call _start_dma_code;
#endif

	/* Code for initializing Async memory banks */

	p2.h = hi(EBIU_AMBCTL1);
	p2.l = lo(EBIU_AMBCTL1);
	r0.h = hi(AMBCTL1VAL);
	r0.l = lo(AMBCTL1VAL);
	[p2] = r0;
	ssync;

	p2.h = hi(EBIU_AMBCTL0);
	p2.l = lo(EBIU_AMBCTL0);
	r0.h = hi(AMBCTL0VAL);
	r0.l = lo(AMBCTL0VAL);
	[p2] = r0;
	ssync;

	p2.h = hi(EBIU_AMGCTL);
	p2.l = lo(EBIU_AMGCTL);
	r0 = AMGCTLVAL;
	w[p2] = r0;
	ssync;

	/* This section keeps the processor in supervisor mode
	 * during kernel boot.  Switches to user mode at end of boot.
	 * See page 3-9 of Hardware Reference manual for documentation.
	 */

	/* EVT15 = _real_start */

	p0.l = lo(EVT15);
	p0.h = hi(EVT15);
	p1.l = _real_start;
	p1.h = _real_start;
	[p0] = p1;
	csync;

	p0.l = lo(IMASK);
	p0.h = hi(IMASK);
	p1.l = IMASK_IVG15;
	p1.h = 0x0;
	[p0] = p1;
	csync;

	raise 15;
	p0.l = .LWAIT_HERE;
	p0.h = .LWAIT_HERE;
	reti = p0;
#if defined(ANOMALY_05000281)
	nop; nop; nop;
#endif
	rti;

.LWAIT_HERE:
	jump .LWAIT_HERE;
ENDPROC(__start)

ENTRY(_real_start)
	[ -- sp ] = reti;
	p0.l = lo(WDOG_CTL);
	p0.h = hi(WDOG_CTL);
	r0 = 0xAD6(z);
	w[p0] = r0;	/* watchdog off for now */
	ssync;

	/* Code update for BSS size == 0
	 * Zero out the bss region.
	 */

	p1.l = ___bss_start;
	p1.h = ___bss_start;
	p2.l = ___bss_stop;
	p2.h = ___bss_stop;
	r0 = 0;
	p2 -= p1;
	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
.L_clear_bss:
	B[p1++] = r0;

	/* In case there is a NULL pointer reference
	 * Zero out region before stext
	 */

	p1.l = 0x0;
	p1.h = 0x0;
	r0.l = __stext;
	r0.h = __stext;
	r0 = r0 >> 1;
	p2 = r0;
	r0 = 0;
	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
.L_clear_zero:
	W[p1++] = r0;

	/* pass the uboot arguments to the global value command line */
	R0 = R7;
	call _cmdline_init;

	p1.l = __rambase;
	p1.h = __rambase;
	r0.l = __sdata;
	r0.h = __sdata;
	[p1] = r0;

	p1.l = __ramstart;
	p1.h = __ramstart;
	p3.l = ___bss_stop;
	p3.h = ___bss_stop;

	r1 = p3;
	[p1] = r1;

	/*
	 * load the current thread pointer and stack
	 */
	r1.l = _init_thread_union;
	r1.h = _init_thread_union;

	r2.l = 0x2000;
	r2.h = 0x0000;
	r1 = r1 + r2;
	sp = r1;
	usp = sp;
	fp = sp;
	jump.l _start_kernel;
ENDPROC(_real_start)

__FINIT

.section .l1.text
#if CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
	p0.h = hi(SIC_IWR);
	p0.l = lo(SIC_IWR);
	r0.l = 0x1;
	r0.h = 0x0;
	[p0] = r0;
	SSYNC;

	/*
	 *  Set PLL_CTL
	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
	 *   - [7]     = output delay (add 200ps of delay to mem signals)
	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
	 *   - [5]     = PDWN      : 1=All Clocks off
	 *   - [3]     = STOPCK    : 1=Core Clock off
	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
	 *   all other bits set to zero
	 */

	p0.h = hi(PLL_LOCKCNT);
	p0.l = lo(PLL_LOCKCNT);
	r0 = 0x300(Z);
	w[p0] = r0.l;
	ssync;

	P2.H = hi(EBIU_SDGCTL);
	P2.L = lo(EBIU_SDGCTL);
	R0 = [P2];
	BITSET (R0, 24);
	[P2] = R0;
	SSYNC;

	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
	r0 = r0 << 9;                    /* Shift it over,                  */
	r1 = CLKIN_HALF;                 /* Do we need to divide CLKIN by 2?*/
	r0 = r1 | r0;
	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
	r1 = r1 << 8;                    /* Shift it over                   */
	r0 = r1 | r0;                    /* add them all together           */

	p0.h = hi(PLL_CTL);
	p0.l = lo(PLL_CTL);              /* Load the address                */
	cli r2;                          /* Disable interrupts              */
	ssync;
	w[p0] = r0.l;                    /* Set the value                   */
	idle;                            /* Wait for the PLL to stablize    */
	sti r2;                          /* Enable interrupts               */

.Lcheck_again:
	p0.h = hi(PLL_STAT);
	p0.l = lo(PLL_STAT);
	R0 = W[P0](Z);
	CC = BITTST(R0,5);
	if ! CC jump .Lcheck_again;

	/* Configure SCLK & CCLK Dividers */
	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
	p0.h = hi(PLL_DIV);
	p0.l = lo(PLL_DIV);
	w[p0] = r0.l;
	ssync;

	p0.l = lo(EBIU_SDRRC);
	p0.h = hi(EBIU_SDRRC);
	r0 = mem_SDRRC;
	w[p0] = r0.l;
	ssync;

	p0.l = (EBIU_SDBCTL & 0xFFFF);
	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
	r0 = mem_SDBCTL;
	w[p0] = r0.l;
	ssync;

	P2.H = hi(EBIU_SDGCTL);
	P2.L = lo(EBIU_SDGCTL);
	R0 = [P2];
	BITCLR (R0, 24);
	p0.h = hi(EBIU_SDSTAT);
	p0.l = lo(EBIU_SDSTAT);
	r2.l = w[p0];
	cc = bittst(r2,3);
	if !cc jump .Lskip;
	NOP;
	BITSET (R0, 23);
.Lskip:
	[P2] = R0;
	SSYNC;

	R0.L = lo(mem_SDGCTL);
	R0.H = hi(mem_SDGCTL);
	R1 = [p2];
	R1 = R1 | R0;
	[P2] = R1;
	SSYNC;

	p0.h = hi(SIC_IWR);
	p0.l = lo(SIC_IWR);
	r0.l = lo(IWR_ENABLE_ALL);
	r0.h = hi(IWR_ENABLE_ALL);
	[p0] = r0;
	SSYNC;

	RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */

ENTRY(_bfin_reset)
	/* No more interrupts to be handled*/
	CLI R6;
	SSYNC;

#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
	p0.h = hi(FIO_INEN);
	p0.l = lo(FIO_INEN);
	r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
	w[p0] = r0.l;

	p0.h = hi(FIO_DIR);
	p0.l = lo(FIO_DIR);
	r0.l = (1 << CONFIG_ENET_FLASH_PIN);
	w[p0] = r0.l;

	p0.h = hi(FIO_FLAG_C);
	p0.l = lo(FIO_FLAG_C);
	r0.l = (1 << CONFIG_ENET_FLASH_PIN);
	w[p0] = r0.l;
#endif

	/* Clear the IMASK register */
	p0.h = hi(IMASK);
	p0.l = lo(IMASK);
	r0 = 0x0;
	[p0] = r0;

	/* Clear the ILAT register */
	p0.h = hi(ILAT);
	p0.l = lo(ILAT);
	r0 = [p0];
	[p0] = r0;
	SSYNC;

	/* make sure SYSCR is set to use BMODE */
	P0.h = hi(SYSCR);
	P0.l = lo(SYSCR);
	R0.l = 0x0;
	W[P0] = R0.l;
	SSYNC;

	/* issue a system soft reset */
	P1.h = hi(SWRST);
	P1.l = lo(SWRST);
	R1.l = 0x0007;
	W[P1] = R1;
	SSYNC;

	/* clear system soft reset */
	R0.l = 0x0000;
	W[P0] = R0;
	SSYNC;

	/* issue core reset */
	raise 1;

	RTS;
ENDPROC(_bfin_reset)

#if CONFIG_DEBUG_KERNEL_START
debug_kernel_start_trap:
	/* Set up a temp stack in L1 - SDRAM might not be working  */
	P0.L = lo(L1_DATA_A_START + 0x100);
	P0.H = hi(L1_DATA_A_START + 0x100);
	SP = P0;

	/* Make sure the Clocks are the way I think they should be */
	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
	r0 = r0 << 9;                    /* Shift it over,                  */
	r1 = CLKIN_HALF;                 /* Do we need to divide CLKIN by 2?*/
	r0 = r1 | r0;
	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
	r1 = r1 << 8;                    /* Shift it over                   */
	r0 = r1 | r0;                    /* add them all together           */

	p0.h = hi(PLL_CTL);
	p0.l = lo(PLL_CTL);              /* Load the address                */
	cli r2;                          /* Disable interrupts              */
	ssync;
	w[p0] = r0.l;                    /* Set the value                   */
	idle;                            /* Wait for the PLL to stablize    */
	sti r2;                          /* Enable interrupts               */

.Lcheck_again1:
	p0.h = hi(PLL_STAT);
	p0.l = lo(PLL_STAT);
	R0 = W[P0](Z);
	CC = BITTST(R0,5);
	if ! CC jump .Lcheck_again1;

	/* Configure SCLK & CCLK Dividers */
	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
	p0.h = hi(PLL_DIV);
	p0.l = lo(PLL_DIV);
	w[p0] = r0.l;
	ssync;

	/* Make sure UART is enabled - you can never be sure */

/*
 * Setup for console. Argument comes from the menuconfig
 */

#ifdef CONFIG_BAUD_9600
#define CONSOLE_BAUD_RATE       9600
#elif CONFIG_BAUD_19200
#define CONSOLE_BAUD_RATE       19200
#elif CONFIG_BAUD_38400
#define CONSOLE_BAUD_RATE       38400
#elif CONFIG_BAUD_57600
#define CONSOLE_BAUD_RATE       57600
#elif CONFIG_BAUD_115200
#define CONSOLE_BAUD_RATE       115200
#endif

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x00(Z);
	w[p0] = r0.L;   /* To Turn off UART clocks */
	ssync;

	p0.h = hi(UART_LCR);
	p0.l = lo(UART_LCR);
	r0 = 0x83(Z);
	w[p0] = r0.L;   /* To enable DLL writes */
	ssync;

	R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));

	p0.h = hi(UART_DLL);
	p0.l = lo(UART_DLL);
	r0 = 0xFF(Z);
	r0 = R1 & R0;
	w[p0] = r0.L;
	ssync;

	p0.h = hi(UART_DLH);
	p0.l = lo(UART_DLH);
	r1 >>= 8 ;
	w[p0] = r1.L;
	ssync;

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x0(Z);
	w[p0] = r0.L;   /* To enable UART clock */
	ssync;

	p0.h = hi(UART_LCR);
	p0.l = lo(UART_LCR);
	r0 = 0x03(Z);
	w[p0] = r0.L;   /* To Turn on UART */
	ssync;

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x01(Z);
	w[p0] = r0.L;   /* To Turn on UART Clocks */
	ssync;

	P0.h = hi(UART_THR);
	P0.l = lo(UART_THR);
	P1.h = hi(UART_LSR);
	P1.l = lo(UART_LSR);

	R0.L = 'K';
	call .Lwait_char;
	R0.L='e';
	call .Lwait_char;
	R0.L='r';
	call .Lwait_char;
	R0.L='n'
	call .Lwait_char;
	R0.L='e'
	call .Lwait_char;
	R0.L='l';
	call .Lwait_char;
	R0.L=' ';
	call .Lwait_char;
	R0.L='c';
	call .Lwait_char;
	R0.L='r';
	call .Lwait_char;
	R0.L='a';
	call .Lwait_char;
	R0.L='s';
	call .Lwait_char;
	R0.L='h';
	call .Lwait_char;
	R0.L='\r';
	call .Lwait_char;
	R0.L='\n';
	call .Lwait_char;

	R0.L='S';
	call .Lwait_char;
	R0.L='E';
	call .Lwait_char;
	R0.L='Q'
	call .Lwait_char;
	R0.L='S'
	call .Lwait_char;
	R0.L='T';
	call .Lwait_char;
	R0.L='A';
	call .Lwait_char;
	R0.L='T';
	call .Lwait_char;
	R0.L='=';
	call .Lwait_char;
	R2 = SEQSTAT;
	call .Ldump_reg;

	R0.L=' ';
	call .Lwait_char;
	R0.L='R';
	call .Lwait_char;
	R0.L='E'
	call .Lwait_char;
	R0.L='T'
	call .Lwait_char;
	R0.L='X';
	call .Lwait_char;
	R0.L='=';
	call .Lwait_char;
	R2 = RETX;
	call .Ldump_reg;

	R0.L='\r';
	call .Lwait_char;
	R0.L='\n';
	call .Lwait_char;

.Ldebug_kernel_start_trap_done:
	JUMP    .Ldebug_kernel_start_trap_done;
.Ldump_reg:
	R3 = 32;
	R4 = 0x0F;
	R5 = ':';  /* one past 9 */

.Ldump_reg2:
	R0 = R2;
	R3 += -4;
	R0 >>>= R3;
	R0 = R0 & R4;
	R0 += 0x30;
	CC = R0 <= R5;
	if CC JUMP .Ldump_reg1;
	R0 += 7;

.Ldump_reg1:
	R1.l = W[P1];
	CC = BITTST(R1, 5);
	if !CC JUMP .Ldump_reg1;
	W[P0] = r0;

	CC = R3 == 0;
	if !CC JUMP .Ldump_reg2
	RTS;

.Lwait_char:
	R1.l = W[P1];
	CC = BITTST(R1, 5);
	if !CC JUMP .Lwait_char;
	W[P0] = r0;
	RTS;

#endif  /* CONFIG_DEBUG_KERNEL_START  */

.data

/*
 * Set up the usable of RAM stuff. Size of RAM is determined then
 * an initial stack set up at the end.
 */

.align 4
__rambase:
.long   0
__ramstart:
.long   0
__ramend:
.long   0