libata: implement slave_link
Explanation taken from the comment of ata_slave_link_init().
In libata, a port contains links and a link contains devices. There
is single host link but if a PMP is attached to it, there can be
multiple fan-out links. On SATA, there's usually a single device
connected to a link but PATA and SATA controllers emulating TF based
interface can have two - master and slave.
However, there are a few controllers which don't fit into this
abstraction too well - SATA controllers which emulate TF interface
with both master and slave devices but also have separate SCR
register sets for each device. These controllers need separate links
for physical link handling (e.g. onlineness, link speed) but should
be treated like a traditional M/S controller for everything else
(e.g. command issue, softreset).
slave_link is libata's way of handling this class of controllers
without impacting core layer too much. For anything other than
physical link handling, the default host link is used for both master
and slave. For physical link handling, separate @ap->slave_link is
used. All dirty details are implemented inside libata core layer.
From LLD's POV, the only difference is that prereset, hardreset and
postreset are called once more for the slave link, so the reset
sequence looks like the following.
prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
softreset(M) -> postreset(M) -> postreset(S)
Note that softreset is called only for the master. Softreset resets
both M/S by definition, so SRST on master should handle both (the
standard method will work just fine).
As slave_link excludes PMP support and only code paths which deal with
the attributes of physical link are affected, all the changes are
localized to libata.h, libata-core.c and libata-eh.c.
* ata_is_host_link() updated so that slave_link is considered as host
link too.
* iterator extended to iterate over the slave_link when using the
underbarred version.
* force param handling updated such that devno 16 is mapped to the
slave link/device.
* ata_link_on/offline() updated to return the combined result from
master and slave link. ata_phys_link_on/offline() are the direct
versions.
* EH autopsy and report are performed separately for master slave
links. Reset is udpated to implement the above described reset
sequence.
Except for reset update, most changes are minor, many of them just
modifying dev->link to ata_dev_phys_link(dev) or using phys online
test instead.
After this update, LLDs can take full advantage of per-dev SCR
registers by simply turning on slave link.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 71024e9..6eed58e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -179,13 +179,20 @@
return &ap->link;
}
- /* we just iterated over the host link, what's next? */
- if (ata_is_host_link(link)) {
- if (!sata_pmp_attached(ap))
+ /* we just iterated over the host master link, what's next? */
+ if (link == &ap->link) {
+ if (!sata_pmp_attached(ap)) {
+ if (unlikely(ap->slave_link) && !dev_only)
+ return ap->slave_link;
return NULL;
+ }
return ap->pmp_link;
}
+ /* slave_link excludes PMP */
+ if (unlikely(link == ap->slave_link))
+ return NULL;
+
/* iterate to the next PMP link */
if (++link < ap->pmp_link + ap->nr_pmp_links)
return link;
@@ -193,6 +200,31 @@
}
/**
+ * ata_dev_phys_link - find physical link for a device
+ * @dev: ATA device to look up physical link for
+ *
+ * Look up physical link which @dev is attached to. Note that
+ * this is different from @dev->link only when @dev is on slave
+ * link. For all other cases, it's the same as @dev->link.
+ *
+ * LOCKING:
+ * Don't care.
+ *
+ * RETURNS:
+ * Pointer to the found physical link.
+ */
+struct ata_link *ata_dev_phys_link(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ if (!ap->slave_link)
+ return dev->link;
+ if (!dev->devno)
+ return &ap->link;
+ return ap->slave_link;
+}
+
+/**
* ata_force_cbl - force cable type according to libata.force
* @ap: ATA port of interest
*
@@ -235,7 +267,8 @@
* the host link and all fan-out ports connected via PMP. If the
* device part is specified as 0 (e.g. 1.00:), it specifies the
* first fan-out link not the host link. Device number 15 always
- * points to the host link whether PMP is attached or not.
+ * points to the host link whether PMP is attached or not. If the
+ * controller has slave link, device number 16 points to it.
*
* LOCKING:
* EH context.
@@ -243,12 +276,11 @@
static void ata_force_link_limits(struct ata_link *link)
{
bool did_spd = false;
- int linkno, i;
+ int linkno = link->pmp;
+ int i;
if (ata_is_host_link(link))
- linkno = 15;
- else
- linkno = link->pmp;
+ linkno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
@@ -295,9 +327,9 @@
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
@@ -349,9 +381,9 @@
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = 0; i < ata_force_tbl_size; i++) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
@@ -2710,7 +2742,7 @@
return;
sata_scr_read(link, SCR_CONTROL, &scontrol);
- if (ata_link_online(link)) {
+ if (ata_phys_link_online(link)) {
tmp = (sstatus >> 4) & 0xf;
ata_link_printk(link, KERN_INFO,
"SATA link up %s (SStatus %X SControl %X)\n",
@@ -3401,6 +3433,12 @@
unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
int warned = 0;
+ /* Slave readiness can't be tested separately from master. On
+ * M/S emulation configuration, this function should be called
+ * only on the master and it will handle both master and slave.
+ */
+ WARN_ON(link == link->ap->slave_link);
+
if (time_after(nodev_deadline, deadline))
nodev_deadline = deadline;
@@ -3622,7 +3660,7 @@
}
/* no point in trying softreset on offline link */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
ehc->i.action &= ~ATA_EH_SOFTRESET;
return 0;
@@ -3700,7 +3738,7 @@
if (rc)
goto out;
/* if link is offline nothing more to do */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
goto out;
/* Link is online. From this point, -ENODEV too is an error. */
@@ -4965,7 +5003,7 @@
}
/**
- * ata_link_online - test whether the given link is online
+ * ata_phys_link_online - test whether the given link is online
* @link: ATA link to test
*
* Test whether @link is online. Note that this function returns
@@ -4978,7 +5016,7 @@
* RETURNS:
* True if the port online status is available and online.
*/
-bool ata_link_online(struct ata_link *link)
+bool ata_phys_link_online(struct ata_link *link)
{
u32 sstatus;
@@ -4989,7 +5027,7 @@
}
/**
- * ata_link_offline - test whether the given link is offline
+ * ata_phys_link_offline - test whether the given link is offline
* @link: ATA link to test
*
* Test whether @link is offline. Note that this function
@@ -5002,7 +5040,7 @@
* RETURNS:
* True if the port offline status is available and offline.
*/
-bool ata_link_offline(struct ata_link *link)
+bool ata_phys_link_offline(struct ata_link *link)
{
u32 sstatus;
@@ -5012,6 +5050,58 @@
return false;
}
+/**
+ * ata_link_online - test whether the given link is online
+ * @link: ATA link to test
+ *
+ * Test whether @link is online. This is identical to
+ * ata_phys_link_online() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if any of M/S links is
+ * online.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port online status is available and online.
+ */
+bool ata_link_online(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_online(link) ||
+ (slave && ata_phys_link_online(slave));
+}
+
+/**
+ * ata_link_offline - test whether the given link is offline
+ * @link: ATA link to test
+ *
+ * Test whether @link is offline. This is identical to
+ * ata_phys_link_offline() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if both M/S links are
+ * offline.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port offline status is available and offline.
+ */
+bool ata_link_offline(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_offline(link) &&
+ (!slave || ata_phys_link_offline(slave));
+}
+
#ifdef CONFIG_PM
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
unsigned int action, unsigned int ehi_flags,
@@ -5151,11 +5241,11 @@
*/
void ata_dev_init(struct ata_device *dev)
{
- struct ata_link *link = dev->link;
+ struct ata_link *link = ata_dev_phys_link(dev);
struct ata_port *ap = link->ap;
unsigned long flags;
- /* SATA spd limit is bound to the first device */
+ /* SATA spd limit is bound to the attached device, reset together */
link->sata_spd_limit = link->hw_sata_spd_limit;
link->sata_spd = 0;
@@ -5318,6 +5408,7 @@
scsi_host_put(ap->scsi_host);
kfree(ap->pmp_link);
+ kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
@@ -5438,6 +5529,68 @@
return host;
}
+/**
+ * ata_slave_link_init - initialize slave link
+ * @ap: port to initialize slave link for
+ *
+ * Create and initialize slave link for @ap. This enables slave
+ * link handling on the port.
+ *
+ * In libata, a port contains links and a link contains devices.
+ * There is single host link but if a PMP is attached to it,
+ * there can be multiple fan-out links. On SATA, there's usually
+ * a single device connected to a link but PATA and SATA
+ * controllers emulating TF based interface can have two - master
+ * and slave.
+ *
+ * However, there are a few controllers which don't fit into this
+ * abstraction too well - SATA controllers which emulate TF
+ * interface with both master and slave devices but also have
+ * separate SCR register sets for each device. These controllers
+ * need separate links for physical link handling
+ * (e.g. onlineness, link speed) but should be treated like a
+ * traditional M/S controller for everything else (e.g. command
+ * issue, softreset).
+ *
+ * slave_link is libata's way of handling this class of
+ * controllers without impacting core layer too much. For
+ * anything other than physical link handling, the default host
+ * link is used for both master and slave. For physical link
+ * handling, separate @ap->slave_link is used. All dirty details
+ * are implemented inside libata core layer. From LLD's POV, the
+ * only difference is that prereset, hardreset and postreset are
+ * called once more for the slave link, so the reset sequence
+ * looks like the following.
+ *
+ * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
+ * softreset(M) -> postreset(M) -> postreset(S)
+ *
+ * Note that softreset is called only for the master. Softreset
+ * resets both M/S by definition, so SRST on master should handle
+ * both (the standard method will work just fine).
+ *
+ * LOCKING:
+ * Should be called before host is registered.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int ata_slave_link_init(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ WARN_ON(ap->slave_link);
+ WARN_ON(ap->flags & ATA_FLAG_PMP);
+
+ link = kzalloc(sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
+ ata_link_init(ap, link, 1);
+ ap->slave_link = link;
+ return 0;
+}
+
static void ata_host_stop(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
@@ -5664,6 +5817,8 @@
/* init sata_spd_limit to the current value */
sata_link_init_spd(&ap->link);
+ if (ap->slave_link)
+ sata_link_init_spd(ap->slave_link);
/* print per-port info to dmesg */
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
@@ -6289,6 +6444,7 @@
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
+EXPORT_SYMBOL_GPL(ata_slave_link_init);
EXPORT_SYMBOL_GPL(ata_host_start);
EXPORT_SYMBOL_GPL(ata_host_register);
EXPORT_SYMBOL_GPL(ata_host_activate);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c1db2f2..99037a4 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1756,7 +1756,7 @@
static unsigned int ata_eh_speed_down(struct ata_device *dev,
unsigned int eflags, unsigned int err_mask)
{
- struct ata_link *link = dev->link;
+ struct ata_link *link = ata_dev_phys_link(dev);
int xfer_ok = 0;
unsigned int verdict;
unsigned int action = 0;
@@ -1880,7 +1880,8 @@
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link)
+ if (!(qc->flags & ATA_QCFLAG_FAILED) ||
+ ata_dev_phys_link(qc->dev) != link)
continue;
/* inherit upper level err_mask */
@@ -1967,6 +1968,23 @@
ata_port_for_each_link(link, ap)
ata_eh_link_autopsy(link);
+ /* Handle the frigging slave link. Autopsy is done similarly
+ * but actions and flags are transferred over to the master
+ * link and handled from there.
+ */
+ if (ap->slave_link) {
+ struct ata_eh_context *mehc = &ap->link.eh_context;
+ struct ata_eh_context *sehc = &ap->slave_link->eh_context;
+
+ ata_eh_link_autopsy(ap->slave_link);
+
+ ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
+ mehc->i.action |= sehc->i.action;
+ mehc->i.dev_action[1] |= sehc->i.dev_action[1];
+ mehc->i.flags |= sehc->i.flags;
+ ata_eh_done(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
+ }
+
/* Autopsy of fanout ports can affect host link autopsy.
* Perform host link autopsy last.
*/
@@ -2001,7 +2019,8 @@
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link ||
+ if (!(qc->flags & ATA_QCFLAG_FAILED) ||
+ ata_dev_phys_link(qc->dev) != link ||
((qc->flags & ATA_QCFLAG_QUIET) &&
qc->err_mask == AC_ERR_DEV))
continue;
@@ -2068,7 +2087,7 @@
char cdb_buf[70] = "";
if (!(qc->flags & ATA_QCFLAG_FAILED) ||
- qc->dev->link != link || !qc->err_mask)
+ ata_dev_phys_link(qc->dev) != link || !qc->err_mask)
continue;
if (qc->dma_dir != DMA_NONE) {
@@ -2160,12 +2179,14 @@
}
static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
- unsigned int *classes, unsigned long deadline)
+ unsigned int *classes, unsigned long deadline,
+ bool clear_classes)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, link)
- classes[dev->devno] = ATA_DEV_UNKNOWN;
+ if (clear_classes)
+ ata_link_for_each_dev(dev, link)
+ classes[dev->devno] = ATA_DEV_UNKNOWN;
return reset(link, classes, deadline);
}
@@ -2187,17 +2208,20 @@
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
struct ata_port *ap = link->ap;
+ struct ata_link *slave = ap->slave_link;
struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_eh_context *sehc = &slave->eh_context;
unsigned int *classes = ehc->classes;
unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
int max_tries = 0, try = 0;
+ struct ata_link *failed_link;
struct ata_device *dev;
unsigned long deadline, now;
ata_reset_fn_t reset;
unsigned long flags;
u32 sstatus;
- int nr_known, rc;
+ int nr_unknown, rc;
/*
* Prepare to reset
@@ -2252,8 +2276,30 @@
}
if (prereset) {
- rc = prereset(link,
- ata_deadline(jiffies, ATA_EH_PRERESET_TIMEOUT));
+ unsigned long deadline = ata_deadline(jiffies,
+ ATA_EH_PRERESET_TIMEOUT);
+
+ if (slave) {
+ sehc->i.action &= ~ATA_EH_RESET;
+ sehc->i.action |= ehc->i.action;
+ }
+
+ rc = prereset(link, deadline);
+
+ /* If present, do prereset on slave link too. Reset
+ * is skipped iff both master and slave links report
+ * -ENOENT or clear ATA_EH_RESET.
+ */
+ if (slave && (rc == 0 || rc == -ENOENT)) {
+ int tmp;
+
+ tmp = prereset(slave, deadline);
+ if (tmp != -ENOENT)
+ rc = tmp;
+
+ ehc->i.action |= sehc->i.action;
+ }
+
if (rc) {
if (rc == -ENOENT) {
ata_link_printk(link, KERN_DEBUG,
@@ -2302,25 +2348,51 @@
else
ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
- rc = ata_do_reset(link, reset, classes, deadline);
- if (rc && rc != -EAGAIN)
+ rc = ata_do_reset(link, reset, classes, deadline, true);
+ if (rc && rc != -EAGAIN) {
+ failed_link = link;
goto fail;
+ }
+ /* hardreset slave link if existent */
+ if (slave && reset == hardreset) {
+ int tmp;
+
+ if (verbose)
+ ata_link_printk(slave, KERN_INFO,
+ "hard resetting link\n");
+
+ ata_eh_about_to_do(slave, NULL, ATA_EH_RESET);
+ tmp = ata_do_reset(slave, reset, classes, deadline,
+ false);
+ switch (tmp) {
+ case -EAGAIN:
+ rc = -EAGAIN;
+ case 0:
+ break;
+ default:
+ failed_link = slave;
+ rc = tmp;
+ goto fail;
+ }
+ }
+
+ /* perform follow-up SRST if necessary */
if (reset == hardreset &&
ata_eh_followup_srst_needed(link, rc, classes)) {
- /* okay, let's do follow-up softreset */
reset = softreset;
if (!reset) {
ata_link_printk(link, KERN_ERR,
"follow-up softreset required "
"but no softreset avaliable\n");
+ failed_link = link;
rc = -EINVAL;
goto fail;
}
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
- rc = ata_do_reset(link, reset, classes, deadline);
+ rc = ata_do_reset(link, reset, classes, deadline, true);
}
} else {
if (verbose)
@@ -2341,7 +2413,7 @@
dev->pio_mode = XFER_PIO_0;
dev->flags &= ~ATA_DFLAG_SLEEPING;
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(ata_dev_phys_link(dev)))
continue;
/* apply class override */
@@ -2354,6 +2426,8 @@
/* record current link speed */
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
link->sata_spd = (sstatus >> 4) & 0xf;
+ if (slave && sata_scr_read(slave, SCR_STATUS, &sstatus) == 0)
+ slave->sata_spd = (sstatus >> 4) & 0xf;
/* thaw the port */
if (ata_is_host_link(link))
@@ -2366,12 +2440,17 @@
* reset and here. This race is mediated by cross checking
* link onlineness and classification result later.
*/
- if (postreset)
+ if (postreset) {
postreset(link, classes);
+ if (slave)
+ postreset(slave, classes);
+ }
/* clear cached SError */
spin_lock_irqsave(link->ap->lock, flags);
link->eh_info.serror = 0;
+ if (slave)
+ slave->eh_info.serror = 0;
spin_unlock_irqrestore(link->ap->lock, flags);
/* Make sure onlineness and classification result correspond.
@@ -2381,19 +2460,21 @@
* link onlineness and classification result, those conditions
* can be reliably detected and retried.
*/
- nr_known = 0;
+ nr_unknown = 0;
ata_link_for_each_dev(dev, link) {
/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
- if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
classes[dev->devno] = ATA_DEV_NONE;
- else
- nr_known++;
+ if (ata_phys_link_online(ata_dev_phys_link(dev)))
+ nr_unknown++;
+ }
}
- if (classify && !nr_known && ata_link_online(link)) {
+ if (classify && nr_unknown) {
if (try < max_tries) {
ata_link_printk(link, KERN_WARNING, "link online but "
"device misclassified, retrying\n");
+ failed_link = link;
rc = -EAGAIN;
goto fail;
}
@@ -2404,6 +2485,8 @@
/* reset successful, schedule revalidation */
ata_eh_done(link, NULL, ATA_EH_RESET);
+ if (slave)
+ ata_eh_done(slave, NULL, ATA_EH_RESET);
ehc->last_reset = jiffies;
ehc->i.action |= ATA_EH_REVALIDATE;
@@ -2411,6 +2494,8 @@
out:
/* clear hotplug flag */
ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
+ if (slave)
+ sehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~ATA_PFLAG_RESETTING;
@@ -2431,7 +2516,7 @@
if (time_before(now, deadline)) {
unsigned long delta = deadline - now;
- ata_link_printk(link, KERN_WARNING,
+ ata_link_printk(failed_link, KERN_WARNING,
"reset failed (errno=%d), retrying in %u secs\n",
rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000));
@@ -2439,8 +2524,13 @@
delta = schedule_timeout_uninterruptible(delta);
}
- if (rc == -EPIPE || try == max_tries - 1)
+ if (try == max_tries - 1) {
sata_down_spd_limit(link);
+ if (slave)
+ sata_down_spd_limit(slave);
+ } else if (rc == -EPIPE)
+ sata_down_spd_limit(failed_link);
+
if (hardreset)
reset = hardreset;
goto retry;
@@ -2472,7 +2562,7 @@
if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
WARN_ON(dev->class == ATA_DEV_PMP);
- if (ata_link_offline(link)) {
+ if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
rc = -EIO;
goto err;
}
@@ -2697,7 +2787,7 @@
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(dev->link);
+ sata_down_spd_limit(ata_dev_phys_link(dev));
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
@@ -2707,7 +2797,7 @@
ata_dev_disable(dev);
/* detach if offline */
- if (ata_link_offline(dev->link))
+ if (ata_phys_link_offline(ata_dev_phys_link(dev)))
ata_eh_detach_dev(dev);
/* schedule probe if necessary */
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index ade5c75..e96de96 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -70,6 +70,7 @@
extern int libata_fua;
extern int libata_noacpi;
extern int libata_allow_tpm;
+extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
extern void ata_force_cbl(struct ata_port *ap);
extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
@@ -107,6 +108,8 @@
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
extern int atapi_check_dma(struct ata_queued_cmd *qc);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern bool ata_phys_link_online(struct ata_link *link);
+extern bool ata_phys_link_offline(struct ata_link *link);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0c7e6f3..244ff60 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -690,7 +690,8 @@
unsigned int qc_active;
int nr_active_links; /* #links with active qcs */
- struct ata_link link; /* host default link */
+ struct ata_link link; /* host default link */
+ struct ata_link *slave_link; /* see ata_slave_link_init() */
int nr_pmp_links; /* nr of available PMP links */
struct ata_link *pmp_link; /* array of PMP links */
@@ -897,6 +898,7 @@
extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
const struct ata_port_info * const * ppi, int n_ports);
+extern int ata_slave_link_init(struct ata_port *ap);
extern int ata_host_start(struct ata_host *host);
extern int ata_host_register(struct ata_host *host,
struct scsi_host_template *sht);
@@ -1136,7 +1138,7 @@
static inline int ata_is_host_link(const struct ata_link *link)
{
- return link == &link->ap->link;
+ return link == &link->ap->link || link == link->ap->slave_link;
}
#else /* CONFIG_SATA_PMP */
static inline bool sata_pmp_supported(struct ata_port *ap)
@@ -1169,7 +1171,7 @@
printk("%sata%u: "fmt, lv, (ap)->print_id , ##args)
#define ata_link_printk(link, lv, fmt, args...) do { \
- if (sata_pmp_attached((link)->ap)) \
+ if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
