Merge branch 'eeepc-laptop' into acpi4asus
diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
index 7445dfb..5b026c6 100644
--- a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
@@ -1,4 +1,4 @@
-What: /sys/devices/platform/eeepc-laptop/disp
+What: /sys/devices/platform/eeepc/disp
Date: May 2008
KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -9,21 +9,21 @@
- 3 = LCD+CRT
If you run X11, you should use xrandr instead.
-What: /sys/devices/platform/eeepc-laptop/camera
+What: /sys/devices/platform/eeepc/camera
Date: May 2008
KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the camera. 1 means on, 0 means off.
-What: /sys/devices/platform/eeepc-laptop/cardr
+What: /sys/devices/platform/eeepc/cardr
Date: May 2008
KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the card reader. 1 means on, 0 means off.
-What: /sys/devices/platform/eeepc-laptop/cpufv
+What: /sys/devices/platform/eeepc/cpufv
Date: Jun 2009
KernelVersion: 2.6.31
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@
`------------ Availables modes
For example, 0x301 means: mode 1 selected, 3 available modes.
-What: /sys/devices/platform/eeepc-laptop/available_cpufv
+What: /sys/devices/platform/eeepc/available_cpufv
Date: Jun 2009
KernelVersion: 2.6.31
Contact: "Corentin Chary" <corentincj@iksaif.net>
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index e2be6bb..9a844ca 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -578,6 +578,8 @@
struct pci_dev *dev;
struct pci_bus *bus;
bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
+ bool absent;
+ u32 l;
if (eeepc->wlan_rfkill)
rfkill_set_sw_state(eeepc->wlan_rfkill, blocked);
@@ -591,6 +593,22 @@
goto out_unlock;
}
+ if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
+ pr_err("Unable to read PCI config space?\n");
+ goto out_unlock;
+ }
+ absent = (l == 0xffffffff);
+
+ if (blocked != absent) {
+ pr_warning("BIOS says wireless lan is %s, "
+ "but the pci device is %s\n",
+ blocked ? "blocked" : "unblocked",
+ absent ? "absent" : "present");
+ pr_warning("skipped wireless hotplug as probably "
+ "inappropriate for this model\n");
+ goto out_unlock;
+ }
+
if (!blocked) {
dev = pci_get_slot(bus, 0);
if (dev) {
@@ -1277,7 +1295,8 @@
* hotplug code. In fact, current hotplug code seems to unplug another
* device...
*/
- if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) {
+ if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0 ||
+ strcmp(model, "1005PE") == 0) {
eeepc->hotplug_disabled = true;
pr_info("wlan hotplug disabled\n");
}
