* Freescale 83xx DMA Controller

Freescale PowerPC 83xx have on chip general purpose DMA controllers.

Required properties:

- compatible        : compatible list, contains 2 entries, first is
		 "fsl,CHIP-dma", where CHIP is the processor
		 (mpc8349, mpc8360, etc.) and the second is
		 "fsl,elo-dma"
- reg               : <registers mapping for DMA general status reg>
- ranges		: Should be defined as specified in 1) to describe the
		  DMA controller channels.
- cell-index        : controller index.  0 for controller @ 0x8100
- interrupts        : <interrupt mapping for DMA IRQ>
- interrupt-parent  : optional, if needed for interrupt mapping


- DMA channel nodes:
        - compatible        : compatible list, contains 2 entries, first is
			 "fsl,CHIP-dma-channel", where CHIP is the processor
			 (mpc8349, mpc8350, etc.) and the second is
			 "fsl,elo-dma-channel"
        - reg               : <registers mapping for channel>
        - cell-index        : dma channel index starts at 0.

Optional properties:
        - interrupts        : <interrupt mapping for DMA channel IRQ>
			  (on 83xx this is expected to be identical to
			   the interrupts property of the parent node)
        - interrupt-parent  : optional, if needed for interrupt mapping

Example:
	dma@82a8 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
		reg = <82a8 4>;
		ranges = <0 8100 1a4>;
		interrupt-parent = <&ipic>;
		interrupts = <47 8>;
		cell-index = <0>;
		dma-channel@0 {
			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
			cell-index = <0>;
			reg = <0 80>;
		};
		dma-channel@80 {
			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
			cell-index = <1>;
			reg = <80 80>;
		};
		dma-channel@100 {
			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
			cell-index = <2>;
			reg = <100 80>;
		};
		dma-channel@180 {
			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
			cell-index = <3>;
			reg = <180 80>;
		};
	};

* Freescale 85xx/86xx DMA Controller

Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers.

Required properties:

- compatible        : compatible list, contains 2 entries, first is
		 "fsl,CHIP-dma", where CHIP is the processor
		 (mpc8540, mpc8540, etc.) and the second is
		 "fsl,eloplus-dma"
- reg               : <registers mapping for DMA general status reg>
- cell-index        : controller index.  0 for controller @ 0x21000,
                                         1 for controller @ 0xc000
- ranges		: Should be defined as specified in 1) to describe the
		  DMA controller channels.

- DMA channel nodes:
        - compatible        : compatible list, contains 2 entries, first is
			 "fsl,CHIP-dma-channel", where CHIP is the processor
			 (mpc8540, mpc8560, etc.) and the second is
			 "fsl,eloplus-dma-channel"
        - cell-index        : dma channel index starts at 0.
        - reg               : <registers mapping for channel>
        - interrupts        : <interrupt mapping for DMA channel IRQ>
        - interrupt-parent  : optional, if needed for interrupt mapping

Example:
	dma@21300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
		reg = <21300 4>;
		ranges = <0 21100 200>;
		cell-index = <0>;
		dma-channel@0 {
			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
			reg = <0 80>;
			cell-index = <0>;
			interrupt-parent = <&mpic>;
			interrupts = <14 2>;
		};
		dma-channel@80 {
			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
			reg = <80 80>;
			cell-index = <1>;
			interrupt-parent = <&mpic>;
			interrupts = <15 2>;
		};
		dma-channel@100 {
			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
			reg = <100 80>;
			cell-index = <2>;
			interrupt-parent = <&mpic>;
			interrupts = <16 2>;
		};
		dma-channel@180 {
			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
			reg = <180 80>;
			cell-index = <3>;
			interrupt-parent = <&mpic>;
			interrupts = <17 2>;
		};
	};