ide: make remaining built-in only IDE host drivers modular (take 2)
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
file for probing PCI host drivers registered with IDE core (special case
for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
the ordering in which all IDE host drivers are probed when IDE is built-in
during link time.
* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).
* Move probing of ide-cris (cris arch specific) host driver before cmd640
(x86 arch specific).
* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
(h8300 arch specific).
* Add "probe_vlb" kernel parameter to cmd640 host driver and update
Documentation/ide.txt accordingly.
* Make IDE_ARM config option visible so it can also be disabled if needed.
* Remove bogus comment from ide.c while at it.
v2:
* Fix two issues spotted by Sergei:
- replace ENOMEM error value by ENOENT in ide-h8300 host driver
- fix MODULE_PARM_DESC() in cmd640 host driver
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 1d50f23..b29ccb4 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -30,7 +30,7 @@
***
*** The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*
*** automatically detected by Linux. For safe, reliable operation with such
-*** interfaces, one *MUST* use the "ide0=cmd640_vlb" kernel option.
+*** interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.
***
*** Use of the "serialize" option is no longer necessary.
@@ -292,9 +292,6 @@
to the first ATA interface found on the particular host, and the defaults for
the base,ctl ports must not be altered.
- "ide0=cmd640_vlb" : *REQUIRED* for VLB cards with the CMD640 chip
- (not for PCI -- automatically detected)
-
"ide=doubler" : probe/support IDE doublers on Amiga
There may be more options than shown -- use the source, Luke!
@@ -310,6 +307,10 @@
* "probe" module parameter when ali14xx driver is compiled as module
("modprobe ali14xx probe")
+Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
+kernel paremeter to enable probing for VLB version of the chipset (PCI ones
+are detected automatically).
+
================================================================================
IDE ATAPI streaming tape driver
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 7c419e8..e92128a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -325,7 +325,7 @@
If unsure, say N.
config BLK_DEV_CMD640
- bool "CMD640 chipset bugfix/support"
+ tristate "CMD640 chipset bugfix/support"
depends on X86
---help---
The CMD-Technologies CMD640 IDE chip is used on many common 486 and
@@ -359,7 +359,7 @@
Otherwise say N.
config BLK_DEV_IDEPNP
- bool "PNP EIDE support"
+ tristate "PNP EIDE support"
depends on PNP
help
If you have a PnP (Plug and Play) compatible EIDE card and
@@ -788,7 +788,7 @@
endif
config BLK_DEV_IDE_PMAC
- bool "Builtin PowerMac IDE support"
+ tristate "Builtin PowerMac IDE support"
depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
help
This driver provides support for the built-in IDE controller on
@@ -842,7 +842,9 @@
depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
- def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+ tristate "ARM IDE support"
+ depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+ default y
config BLK_DEV_IDE_ICSIDE
tristate "ICS IDE interface support"
@@ -874,7 +876,7 @@
Simtec BAST or the Thorcom VR1000
config ETRAX_IDE
- bool "ETRAX IDE support"
+ tristate "ETRAX IDE support"
depends on CRIS && BROKEN
select BLK_DEV_IDEDMA
help
@@ -908,14 +910,14 @@
endchoice
config IDE_H8300
- bool "H8300 IDE support"
+ tristate "H8300 IDE support"
depends on H8300
default y
help
Enables the H8300 IDE driver.
config BLK_DEV_GAYLE
- bool "Amiga Gayle IDE interface support"
+ tristate "Amiga Gayle IDE interface support"
depends on AMIGA
help
This is the IDE driver for the Amiga Gayle IDE interface. It supports
@@ -946,7 +948,7 @@
runtime using the "ide=doubler" kernel boot parameter.
config BLK_DEV_BUDDHA
- bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
+ tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
help
This is the IDE driver for the IDE interfaces on the Buddha,
@@ -958,7 +960,7 @@
to one of its IDE interfaces.
config BLK_DEV_FALCON_IDE
- bool "Falcon IDE interface support"
+ tristate "Falcon IDE interface support"
depends on ATARI
help
This is the IDE driver for the builtin IDE interface on the Atari
@@ -967,7 +969,7 @@
interface.
config BLK_DEV_MAC_IDE
- bool "Macintosh Quadra/Powerbook IDE interface support"
+ tristate "Macintosh Quadra/Powerbook IDE interface support"
depends on MAC
help
This is the IDE driver for the builtin IDE interface on some m68k
@@ -980,7 +982,7 @@
builtin IDE interface.
config BLK_DEV_Q40IDE
- bool "Q40/Q60 IDE interface support"
+ tristate "Q40/Q60 IDE interface support"
depends on Q40
help
Enable the on-board IDE controller in the Q40/Q60. This should
@@ -988,7 +990,7 @@
drive subsystem through an expansion card.
config BLK_DEV_MPC8xx_IDE
- bool "MPC8xx IDE support"
+ tristate "MPC8xx IDE support"
depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
help
This option provides support for IDE on Motorola MPC8xx Systems.
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index b181fc6..0d2da89 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -7,41 +7,37 @@
# Note : at this point, these files are compiled on all systems.
# In the future, some of these should be built conditionally.
#
-# First come modules that register themselves with the core
+# link order is important here
EXTRA_CFLAGS += -Idrivers/ide
-obj-$(CONFIG_BLK_DEV_IDE) += pci/
-
ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o
-ide-core-$(CONFIG_BLK_DEV_CMD640) += pci/cmd640.o
-
-# Core IDE code - must come before legacy
+# core IDE code
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
-ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
-# built-in only drivers from arm/
-ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o
-
-# built-in only drivers from legacy/
-ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o
-ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o
-ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o
-ide-core-$(CONFIG_BLK_DEV_MAC_IDE) += legacy/macide.o
-ide-core-$(CONFIG_BLK_DEV_Q40IDE) += legacy/q40ide.o
-
-# built-in only drivers from ppc/
-ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
-ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
-
-# built-in only drivers from h8300/
-ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o
-
obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
+
+ifeq ($(CONFIG_IDE_ARM), y)
+ ide-arm-core-y += arm/ide_arm.o
+ obj-y += ide-arm-core.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/
+
+obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o
+
+ifeq ($(CONFIG_BLK_DEV_CMD640), y)
+ cmd640-core-y += pci/cmd640.o
+ obj-y += cmd640-core.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/
+obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
+obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
@@ -49,6 +45,20 @@
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
-obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/
-obj-$(CONFIG_BLK_DEV_HD) += legacy/
-obj-$(CONFIG_ETRAX_IDE) += cris/
+ifeq ($(CONFIG_BLK_DEV_IDECS), y)
+ ide-cs-core-y += legacy/ide-cs.o
+ obj-y += ide-cs-core.o
+endif
+
+ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
+ ide-platform-core-y += legacy/ide_platform.o
+ obj-y += ide-platform-core.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/
+
+# old hd driver must be last
+ifeq ($(CONFIG_BLK_DEV_HD), y)
+ hd-core-y += legacy/hd.o
+ obj-y += hd-core.o
+endif
diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
index 6a78f07..5f63ad2 100644
--- a/drivers/ide/arm/Makefile
+++ b/drivers/ide/arm/Makefile
@@ -3,4 +3,8 @@
obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o
+ifeq ($(CONFIG_IDE_ARM), m)
+ obj-m += ide_arm.o
+endif
+
EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index a1b5dda..60f2497 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -24,7 +24,7 @@
# define IDE_ARM_IRQ IRQ_HARDDISK
#endif
-void __init ide_arm_init(void)
+static int __init ide_arm_init(void)
{
ide_hwif_t *hwif;
hw_regs_t hw;
@@ -41,4 +41,8 @@
ide_device_add(idx);
}
+
+ return 0;
}
+
+module_init(ide_arm_init);
diff --git a/drivers/ide/cris/Makefile b/drivers/ide/cris/Makefile
index 6176e8d..20b9596 100644
--- a/drivers/ide/cris/Makefile
+++ b/drivers/ide/cris/Makefile
@@ -1,3 +1,3 @@
EXTRA_CFLAGS += -Idrivers/ide
-obj-y += ide-cris.o
+obj-$(CONFIG_IDE_ETRAX) += ide-cris.o
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 9245362..8c3294c 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -754,8 +754,7 @@
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
}
-void __init
-init_e100_ide (void)
+static int __init init_e100_ide(void)
{
hw_regs_t hw;
int ide_offsets[IDE_NR_PORTS], h, i;
@@ -823,6 +822,8 @@
cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
ide_device_add(idx);
+
+ return 0;
}
static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16)));
@@ -1056,3 +1057,5 @@
LED_DISK_READ(1);
}
}
+
+module_init(init_e100_ide);
diff --git a/drivers/ide/h8300/Makefile b/drivers/ide/h8300/Makefile
new file mode 100644
index 0000000..5eba16f
--- /dev/null
+++ b/drivers/ide/h8300/Makefile
@@ -0,0 +1,2 @@
+
+obj-$(CONFIG_IDE_H8300) += ide-h8300.o
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 9fa78e9..4f6d019 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -84,7 +84,7 @@
hwif->INSL = NULL;
}
-void __init h8300_ide_init(void)
+static int __init h8300_ide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
@@ -104,7 +104,7 @@
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL) {
printk(KERN_ERR "ide-h8300: IDE I/F register failed\n");
- return;
+ return -ENOENT;
}
index = hwif->index;
@@ -117,8 +117,12 @@
ide_device_add(idx);
- return;
+ return 0;
out_busy:
printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
+
+ return -EBUSY;
}
+
+module_init(h8300_ide_init);
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 802efd4..cbbb0f7 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -75,12 +75,15 @@
.remove = idepnp_remove,
};
-void __init pnpide_init(void)
+static int __init pnpide_init(void)
{
- pnp_register_driver(&idepnp_driver);
+ return pnp_register_driver(&idepnp_driver);
}
-void __exit pnpide_exit(void)
+static void __exit pnpide_exit(void)
{
pnp_unregister_driver(&idepnp_driver);
}
+
+module_init(pnpide_init);
+module_exit(pnpide_exit);
diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
new file mode 100644
index 0000000..23015d8
--- /dev/null
+++ b/drivers/ide/ide-scan-pci.c
@@ -0,0 +1,11 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ide.h>
+
+static int __init ide_scan_pci(void)
+{
+ return ide_scan_pcibus();
+}
+
+module_init(ide_scan_pci);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 6f99f5c..5f3e53e 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -95,7 +95,7 @@
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
+int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
#endif
int noautodma = 0;
@@ -178,8 +178,6 @@
#endif
}
-extern void ide_arm_init(void);
-
/*
* init_ide_data() sets reasonable default values into all fields
* of all instances of the hwifs and drives, but only on the first call.
@@ -1223,26 +1221,12 @@
return 0; /* zero = nothing matched */
}
-#ifdef CONFIG_BLK_DEV_ALI14XX
extern int probe_ali14xx;
-extern int ali14xx_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_UMC8672
extern int probe_umc8672;
-extern int umc8672_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_DTC2278
extern int probe_dtc2278;
-extern int dtc2278_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_HT6560B
extern int probe_ht6560b;
-extern int ht6560b_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_QD65XX
extern int probe_qd65xx;
-extern int qd65xx_init(void);
-#endif
+extern int cmd640_vlb;
static int __initdata is_chipset_set[MAX_HWIFS];
@@ -1458,11 +1442,8 @@
#endif
#ifdef CONFIG_BLK_DEV_CMD640
case -14: /* "cmd640_vlb" */
- {
- extern int cmd640_vlb; /* flag for cmd640.c */
cmd640_vlb = 1;
goto done;
- }
#endif
#ifdef CONFIG_BLK_DEV_HT6560B
case -13: /* "ht6560b" */
@@ -1552,83 +1533,6 @@
return 1;
}
-extern void __init pnpide_init(void);
-extern void __exit pnpide_exit(void);
-extern void __init h8300_ide_init(void);
-extern void __init mpc8xx_ide_probe(void);
-
-/*
- * probe_for_hwifs() finds/initializes "known" IDE interfaces
- */
-static void __init probe_for_hwifs (void)
-{
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
- ide_scan_pcibus(ide_scan_direction);
-#endif
-
-#ifdef CONFIG_ETRAX_IDE
- {
- extern void init_e100_ide(void);
- init_e100_ide();
- }
-#endif /* CONFIG_ETRAX_IDE */
-#ifdef CONFIG_BLK_DEV_CMD640
- {
- extern void ide_probe_for_cmd640x(void);
- ide_probe_for_cmd640x();
- }
-#endif /* CONFIG_BLK_DEV_CMD640 */
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- {
- extern int pmac_ide_probe(void);
- (void)pmac_ide_probe();
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#ifdef CONFIG_BLK_DEV_GAYLE
- {
- extern void gayle_init(void);
- gayle_init();
- }
-#endif /* CONFIG_BLK_DEV_GAYLE */
-#ifdef CONFIG_BLK_DEV_FALCON_IDE
- {
- extern void falconide_init(void);
- falconide_init();
- }
-#endif /* CONFIG_BLK_DEV_FALCON_IDE */
-#ifdef CONFIG_BLK_DEV_MAC_IDE
- {
- extern void macide_init(void);
- macide_init();
- }
-#endif /* CONFIG_BLK_DEV_MAC_IDE */
-#ifdef CONFIG_BLK_DEV_Q40IDE
- {
- extern void q40ide_init(void);
- q40ide_init();
- }
-#endif /* CONFIG_BLK_DEV_Q40IDE */
-#ifdef CONFIG_BLK_DEV_BUDDHA
- {
- extern void buddha_init(void);
- buddha_init();
- }
-#endif /* CONFIG_BLK_DEV_BUDDHA */
-#ifdef CONFIG_BLK_DEV_IDEPNP
- pnpide_init();
-#endif
-#ifdef CONFIG_H8300
- h8300_ide_init();
-#endif
-#ifdef BLK_DEV_MPC8xx_IDE
- mpc8xx_ide_probe();
-#endif
-}
-
-/*
- * Probe module
- */
-
EXPORT_SYMBOL(ide_lock);
static int ide_bus_match(struct device *dev, struct device_driver *drv)
@@ -1775,33 +1679,6 @@
proc_ide_create();
-#ifdef CONFIG_IDE_ARM
- ide_arm_init();
-#endif
-#ifdef CONFIG_BLK_DEV_ALI14XX
- if (probe_ali14xx)
- (void)ali14xx_init();
-#endif
-#ifdef CONFIG_BLK_DEV_UMC8672
- if (probe_umc8672)
- (void)umc8672_init();
-#endif
-#ifdef CONFIG_BLK_DEV_DTC2278
- if (probe_dtc2278)
- (void)dtc2278_init();
-#endif
-#ifdef CONFIG_BLK_DEV_HT6560B
- if (probe_ht6560b)
- (void)ht6560b_init();
-#endif
-#ifdef CONFIG_BLK_DEV_QD65XX
- if (probe_qd65xx)
- (void)qd65xx_init();
-#endif
-
- /* Probe for special PCI and other "known" interface chipsets. */
- probe_for_hwifs();
-
return 0;
}
@@ -1837,10 +1714,6 @@
for (index = 0; index < MAX_HWIFS; ++index)
ide_unregister(index);
-#ifdef CONFIG_BLK_DEV_IDEPNP
- pnpide_exit();
-#endif
-
proc_ide_destroy();
bus_unregister(&ide_bus_type);
diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile
index 4098223..7043ec7 100644
--- a/drivers/ide/legacy/Makefile
+++ b/drivers/ide/legacy/Makefile
@@ -1,15 +1,24 @@
+# link order is important here
+
obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o
+obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o
obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o
-obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
-obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
+obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
+obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
+obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o
+obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o
+obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o
-obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o
+ifeq ($(CONFIG_BLK_DEV_IDECS), m)
+ obj-m += ide-cs.o
+endif
-# Last of all
-obj-$(CONFIG_BLK_DEV_HD) += hd.o
+ifeq ($(CONFIG_BLK_DEV_PLATFORM), m)
+ obj-m += ide_platform.o
+endif
EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 38c3a6d..5ec0be4 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -231,8 +231,7 @@
module_param_named(probe, probe_ali14xx, bool, 0);
MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
-/* Can be called directly from ide.c. */
-int __init ali14xx_init(void)
+static int __init ali14xx_init(void)
{
if (probe_ali14xx == 0)
goto out;
@@ -248,9 +247,7 @@
return -ENODEV;
}
-#ifdef MODULE
module_init(ali14xx_init);
-#endif
MODULE_AUTHOR("see local file");
MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index ba64c4b..e97766a 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -143,7 +143,7 @@
* Probe for a Buddha or Catweasel IDE interface
*/
-void __init buddha_init(void)
+static int __init buddha_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
@@ -243,4 +243,8 @@
ide_device_add(idx);
}
+
+ return 0;
}
+
+module_init(buddha_init);
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 24a845d..13eee6d 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -150,8 +150,7 @@
module_param_named(probe, probe_dtc2278, bool, 0);
MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
-/* Can be called directly from ide.c. */
-int __init dtc2278_init(void)
+static int __init dtc2278_init(void)
{
if (probe_dtc2278 == 0)
return -ENODEV;
@@ -163,9 +162,7 @@
return 0;
}
-#ifdef MODULE
module_init(dtc2278_init);
-#endif
MODULE_AUTHOR("See Local File");
MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets");
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index c1a8454..dec2ef9 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -62,7 +62,7 @@
* Probe for a Falcon IDE interface
*/
-void __init falconide_init(void)
+static int __init falconide_init(void)
{
if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
@@ -84,4 +84,9 @@
ide_device_add(idx);
}
+ }
+
+ return 0;
}
+
+module_init(falconide_init);
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index ec53dc9..e21ef75 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -110,13 +110,13 @@
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
-void __init gayle_init(void)
+static int __init gayle_init(void)
{
int a4000, i;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
if (!MACH_IS_AMIGA)
- return;
+ return -ENODEV;
if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
goto found;
@@ -126,7 +126,7 @@
NULL))
goto found;
#endif
- return;
+ return -ENODEV;
found:
for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
@@ -191,4 +191,8 @@
}
ide_device_add(idx);
+
+ return 0;
}
+
+module_init(gayle_init);
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index a4245d1..8da5031 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -307,8 +307,7 @@
module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
-/* Can be called directly from ide.c. */
-int __init ht6560b_init(void)
+static int __init ht6560b_init(void)
{
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
@@ -369,9 +368,7 @@
return -ENODEV;
}
-#ifdef MODULE
module_init(ht6560b_init);
-#endif
MODULE_AUTHOR("See Local File");
MODULE_DESCRIPTION("HT-6560B EIDE-controller support");
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index c1b7881..6b3e960 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -81,7 +81,7 @@
* Probe for a Macintosh IDE interface
*/
-void __init macide_init(void)
+static int __init macide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
@@ -106,7 +106,7 @@
IRQ_BABOON_1);
break;
default:
- return;
+ return -ENODEV;
}
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
@@ -139,4 +139,8 @@
ide_device_add(idx);
}
+
+ return 0;
}
+
+module_init(macide_init);
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 2082e9c..0154c91 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -111,7 +111,7 @@
* Probe for Q40 IDE interfaces
*/
-void __init q40ide_init(void)
+static int __init q40ide_init(void)
{
int i;
ide_hwif_t *hwif;
@@ -119,7 +119,7 @@
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
if (!MACH_IS_Q40)
- return ;
+ return -ENODEV;
for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
hw_regs_t hw;
@@ -153,5 +153,8 @@
}
ide_device_add(idx);
+
+ return 0;
}
+module_init(q40ide_init);
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 912e738..2bac4c1 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -478,8 +478,7 @@
module_param_named(probe, probe_qd65xx, bool, 0);
MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
-/* Can be called directly from ide.c. */
-int __init qd65xx_init(void)
+static int __init qd65xx_init(void)
{
if (probe_qd65xx == 0)
return -ENODEV;
@@ -492,9 +491,7 @@
return 0;
}
-#ifdef MODULE
module_init(qd65xx_init);
-#endif
MODULE_AUTHOR("Samuel Thibault");
MODULE_DESCRIPTION("support of qd65xx vlb ide chipset");
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index 79577b9..a1ae1ae 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -169,8 +169,7 @@
module_param_named(probe, probe_umc8672, bool, 0);
MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
-/* Can be called directly from ide.c. */
-int __init umc8672_init(void)
+static int __init umc8672_init(void)
{
if (probe_umc8672 == 0)
goto out;
@@ -181,9 +180,7 @@
return -ENODEV;;
}
-#ifdef MODULE
module_init(umc8672_init);
-#endif
MODULE_AUTHOR("Wolfram Podien");
MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset");
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
index 95d1ea8..9480325 100644
--- a/drivers/ide/pci/Makefile
+++ b/drivers/ide/pci/Makefile
@@ -36,4 +36,8 @@
# Must appear at the end of the block
obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o
+ifeq ($(CONFIG_BLK_DEV_CMD640), m)
+ obj-m += cmd640.o
+endif
+
EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 5096e05..da3565e 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -706,9 +706,9 @@
}
/*
- * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c
+ * Probe for a cmd640 chipset, and initialize it if found.
*/
-int __init ide_probe_for_cmd640x (void)
+static int __init cmd640x_init(void)
{
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
int second_port_toggled = 0;
@@ -883,3 +883,7 @@
return 1;
}
+module_param_named(probe_vlb, cmd640_vlb, bool, 0);
+MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
+
+module_init(cmd640x_init);
diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile
new file mode 100644
index 0000000..65af584
--- /dev/null
+++ b/drivers/ide/ppc/Makefile
@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
+obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 8172e81..3fd5d45 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -839,7 +839,7 @@
ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports;
}
-void __init mpc8xx_ide_probe(void)
+static int __init mpc8xx_ide_probe(void)
{
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@@ -851,4 +851,8 @@
#endif
ide_device_add(idx);
+
+ return 0;
}
+
+module_init(mpc8xx_ide_probe);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 36e4b95..cd51474 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1786,3 +1786,5 @@
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
+module_init(pmac_ide_probe);
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index d89f84d..63ef8aa 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -766,21 +766,20 @@
/**
* ide_scan_pcibus - perform the initial IDE driver scan
- * @scan_direction: set for reverse order scanning
*
* Perform the initial bus rather than driver ordered scan of the
* PCI drivers. After this all IDE pci handling becomes standard
* module ordering not traditionally ordered.
*/
-
-void __init ide_scan_pcibus (int scan_direction)
+
+int __init ide_scan_pcibus(void)
{
struct pci_dev *dev = NULL;
struct pci_driver *d;
struct list_head *l, *n;
pre_init = 0;
- if (!scan_direction)
+ if (!ide_scan_direction)
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
ide_scan_pcidev(dev);
else
@@ -801,5 +800,7 @@
printk(KERN_ERR "%s: failed to register %s driver\n",
__FUNCTION__, d->driver.mod_name);
}
+
+ return 0;
}
#endif
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 9c037a0..7357375 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1014,7 +1014,8 @@
void ide_init_disk(struct gendisk *, ide_drive_t *);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-extern void ide_scan_pcibus(int scan_direction) __init;
+extern int ide_scan_direction;
+int __init ide_scan_pcibus(void);
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
#else
