diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index de3b252..c3cca92 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -13,13 +13,14 @@
 -------------------------
 
 Major and minor numbers for block and character devices are allocated
-by the Linux assigned name and number authority (currently better
-known as H Peter Anvin). The site is http://www.lanana.org/. This
+by the Linux assigned name and number authority (currently this is
+Torben Mathiasen). The site is http://www.lanana.org/. This
 also deals with allocating numbers for devices that are not going to
 be submitted to the mainstream kernel.
+See Documentation/devices.txt for more information on this.
 
-If you don't use assigned numbers then when you device is submitted it will
-get given an assigned number even if that is different from values you may
+If you don't use assigned numbers then when your device is submitted it will
+be given an assigned number even if that is different from values you may
 have shipped to customers before.
 
 Who To Submit Drivers To
@@ -32,7 +33,8 @@
 	If the code area has a general maintainer then please submit it to
 	the maintainer listed in MAINTAINERS in the kernel file. If the
 	maintainer does not respond or you cannot find the appropriate
-	maintainer then please contact Alan Cox <alan@lxorguk.ukuu.org.uk>
+	maintainer then please contact the 2.2 kernel maintainer:
+	Marc-Christian Petersen <m.c.p@wolk-project.de>.
 
 Linux 2.4:
 	The same rules apply as 2.2. The final contact point for Linux 2.4
@@ -48,7 +50,7 @@
 
 Licensing:	The code must be released to us under the
 		GNU General Public License. We don't insist on any kind
-		of exclusively GPL licensing, and if you wish the driver
+		of exclusive GPL licensing, and if you wish the driver
 		to be useful to other communities such as BSD you may well
 		wish to release under multiple licenses.
 
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 4d1f41b..6761a7b 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -35,7 +35,7 @@
 
 To create a patch for a single file, it is often sufficient to do:
 
-	SRCTREE= linux-2.4
+	SRCTREE= linux-2.6
 	MYFILE=  drivers/net/mydriver.c
 
 	cd $SRCTREE
@@ -48,17 +48,18 @@
 or unmodified kernel source tree, and generate a diff against your
 own source tree.  For example:
 
-	MYSRC= /devel/linux-2.4
+	MYSRC= /devel/linux-2.6
 
-	tar xvfz linux-2.4.0-test11.tar.gz
-	mv linux linux-vanilla
-	wget http://www.moses.uklinux.net/patches/dontdiff
-	diff -uprN -X dontdiff linux-vanilla $MYSRC > /tmp/patch
-	rm -f dontdiff
+	tar xvfz linux-2.6.12.tar.gz
+	mv linux-2.6.12 linux-2.6.12-vanilla
+	diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \
+		linux-2.6.12-vanilla $MYSRC > /tmp/patch
 
 "dontdiff" is a list of files which are generated by the kernel during
 the build process, and should be ignored in any diff(1)-generated
-patch.  dontdiff is maintained by Tigran Aivazian <tigran@veritas.com>
+patch.  The "dontdiff" file is included in the kernel tree in
+2.6.12 and later.  For earlier kernel versions, you can get it
+from <http://www.xenotime.net/linux/doc/dontdiff>.
 
 Make sure your patch does not include any extra files which do not
 belong in a patch submission.  Make sure to review your patch -after-
@@ -66,18 +67,20 @@
 
 If your changes produce a lot of deltas, you may want to look into
 splitting them into individual patches which modify things in
-logical stages, this will facilitate easier reviewing by other
+logical stages.  This will facilitate easier reviewing by other
 kernel developers, very important if you want your patch accepted.
-There are a number of scripts which can aid in this;
+There are a number of scripts which can aid in this:
 
 Quilt:
 http://savannah.nongnu.org/projects/quilt
 
 Randy Dunlap's patch scripts:
-http://developer.osdl.org/rddunlap/scripts/patching-scripts.tgz
+http://www.xenotime.net/linux/scripts/patching-scripts-002.tar.gz
 
 Andrew Morton's patch scripts:
-http://www.zip.com.au/~akpm/linux/patches/patch-scripts-0.16
+http://www.zip.com.au/~akpm/linux/patches/patch-scripts-0.20
+
+
 
 2) Describe your changes.
 
@@ -163,6 +166,8 @@
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file. (ie. patch monkey
  in re-transmission mode)
+URL: <http://www.kernel.org/pub/linux/kernel/people/rusty/trivial/>
+
 
 
 
@@ -291,6 +296,17 @@
 point out some special detail about the sign-off. 
 
 
+
+12) More references for submitting patches
+
+Andrew Morton, "The perfect patch" (tpp).
+  <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+
+Jeff Garzik, "Linux kernel patch submission format."
+  <http://linux.yyz.us/patch-format.html>
+
+
+
 -----------------------------------
 SECTION 2 - HINTS, TIPS, AND TRICKS
 -----------------------------------
@@ -359,7 +375,5 @@
 4) Don't over-design.
 
 Don't try to anticipate nebulous future cases which may or may not
-be useful:  "Make it as simple as you can, and no simpler"
-
-
+be useful:  "Make it as simple as you can, and no simpler."
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89cd417..67e99f1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -437,6 +437,10 @@
 			Format: {"of[f]" | "sk[ipmbr]"}
 			See comment in arch/i386/boot/edd.S
 
+	edd		[EDD]
+			Format: {"of[f]" | "sk[ipmbr]"}
+			See comment in arch/i386/boot/edd.S
+
 	eicon=		[HW,ISDN] 
 			Format: <id>,<membase>,<irq>
 
@@ -622,6 +626,17 @@
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
 			See header of drivers/scsi/ips.c.
 
+	irqfixup	[HW]
+			When an interrupt is not handled search all handlers
+			for it. Intended to get systems with badly broken
+			firmware running.
+
+	irqpoll		[HW]
+			When an interrupt is not handled search all handlers
+			for it. Also check all handlers each timer
+			interrupt. Intended to get systems with badly broken
+			firmware running.
+
 	isapnp=		[ISAPNP]
 			Format: <RDP>, <reset>, <pci_scan>, <verbosity>
 
@@ -1030,6 +1045,10 @@
 		irqmask=0xMMMM		[IA-32] Set a bit mask of IRQs allowed to be assigned
 					automatically to PCI devices. You can make the kernel
 					exclude IRQs of your ISA cards this way.
+		pirqaddr=0xAAAAA	[IA-32] Specify the physical address
+					of the PIRQ table (normally generated
+					by the BIOS) if it is outside the
+					F0000h-100000h range.
 		lastbus=N		[IA-32] Scan all buses till bus #N. Can be useful
 					if the kernel is unable to find your secondary buses
 					and you want to tell it explicitly which ones they are.
diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html
index 4b3d8f6..441407b 100644
--- a/Documentation/video4linux/API.html
+++ b/Documentation/video4linux/API.html
@@ -1,399 +1,16 @@
-<HTML><HEAD>
-<TITLE>Video4Linux Kernel API Reference v0.1:19990430</TITLE>
-</HEAD>
-<! Revision History: >
-<!   4/30/1999 - Fred Gleason (fredg@wava.com)>
-<! Documented extensions for the Radio Data System (RDS) extensions >
-<BODY bgcolor="#ffffff">
-<H3>Devices</H3>
-Video4Linux provides the following sets of device files. These live on the
-character device formerly known as "/dev/bttv". /dev/bttv should be a
-symlink to /dev/video0 for most people. 
-<P>
-<TABLE>
-<TR><TH>Device Name</TH><TH>Minor Range</TH><TH>Function</TH>
-<TR><TD>/dev/video</TD><TD>0-63</TD><TD>Video Capture Interface</TD>
-<TR><TD>/dev/radio</TD><TD>64-127</TD><TD>AM/FM Radio Devices</TD>
-<TR><TD>/dev/vtx</TD><TD>192-223</TD><TD>Teletext Interface Chips</TD>
-<TR><TD>/dev/vbi</TD><TD>224-239</TD><TD>Raw VBI Data (Intercast/teletext)</TD>
-</TABLE>
-<P>
-Video4Linux programs open and scan the devices to find what they are looking
-for. Capability queries define what each interface supports. The 
-described API is only defined for video capture cards. The relevant subset
-applies to radio cards. Teletext interfaces talk the existing VTX API.
-<P>
-<H3>Capability Query Ioctl</H3>
-The <B>VIDIOCGCAP</B> ioctl call is used to obtain the capability
-information for a video device. The <b>struct video_capability</b> object
-passed to the ioctl is completed and returned. It contains the following
-information
-<P>
-<TABLE>
-<TR><TD><b>name[32]</b><TD>Canonical name for this interface</TD>
-<TR><TD><b>type</b><TD>Type of interface</TD>
-<TR><TD><b>channels</b><TD>Number of radio/tv channels if appropriate</TD>
-<TR><TD><b>audios</b><TD>Number of audio devices if appropriate</TD>
-<TR><TD><b>maxwidth</b><TD>Maximum capture width in pixels</TD>
-<TR><TD><b>maxheight</b><TD>Maximum capture height in pixels</TD>
-<TR><TD><b>minwidth</b><TD>Minimum capture width in pixels</TD>
-<TR><TD><b>minheight</b><TD>Minimum capture height in pixels</TD>
-</TABLE>
-<P>
-The type field lists the capability flags for the device. These are
-as follows
-<P>
-<TABLE>
-<TR><TH>Name</TH><TH>Description</TH>
-<TR><TD><b>VID_TYPE_CAPTURE</b><TD>Can capture to memory</TD>
-<TR><TD><b>VID_TYPE_TUNER</b><TD>Has a tuner of some form</TD>
-<TR><TD><b>VID_TYPE_TELETEXT</b><TD>Has teletext capability</TD>
-<TR><TD><b>VID_TYPE_OVERLAY</b><TD>Can overlay its image onto the frame buffer</TD>
-<TR><TD><b>VID_TYPE_CHROMAKEY</b><TD>Overlay is Chromakeyed</TD>
-<TR><TD><b>VID_TYPE_CLIPPING</b><TD>Overlay clipping is supported</TD>
-<TR><TD><b>VID_TYPE_FRAMERAM</b><TD>Overlay overwrites frame buffer memory</TD>
-<TR><TD><b>VID_TYPE_SCALES</b><TD>The hardware supports image scaling</TD>
-<TR><TD><b>VID_TYPE_MONOCHROME</b><TD>Image capture is grey scale only</TD>
-<TR><TD><b>VID_TYPE_SUBCAPTURE</b><TD>Capture can be of only part of the image</TD>
-</TABLE>
-<P>
-The minimum and maximum sizes listed for a capture device do not imply all
-that all height/width ratios or sizes within the range are possible. A
-request to set a size will be honoured by the largest available capture
-size whose capture is no large than the requested rectangle in either
-direction. For example the quickcam has 3 fixed settings. 
-<P>
-<H3>Frame Buffer</H3>
-Capture cards that drop data directly onto the frame buffer must be told the
-base address of the frame buffer, its size and organisation. This is a 
-privileged ioctl and one that eventually X itself should set.
-<P>
-The <b>VIDIOCSFBUF</b> ioctl sets the frame buffer parameters for a capture
-card. If the card does not do direct writes to the frame buffer then this
-ioctl will be unsupported. The <b>VIDIOCGFBUF</b> ioctl returns the
-currently used parameters. The structure used in both cases is a 
-<b>struct video_buffer</b>.
-<P>
-<TABLE>
-<TR><TD><b>void *base</b></TD><TD>Base physical address of the buffer</TD>
-<TR><TD><b>int height</b></TD><TD>Height of the frame buffer</TD>
-<TR><TD><b>int width</b></TD><TD>Width of the frame buffer</TD>
-<TR><TD><b>int depth</b></TD><TD>Depth of the frame buffer</TD>
-<TR><TD><b>int bytesperline</b></TD><TD>Number of bytes of memory between the start of two adjacent lines</TD>
-</TABLE>
-<P>
-Note that these values reflect the physical layout of the frame buffer. 
-The visible area may be smaller. In fact under XFree86 this is commonly the
-case. XFree86 DGA can provide the parameters required to set up this ioctl.
-Setting the base address to NULL indicates there is no physical frame buffer
-access.
-<P>
-<H3>Capture Windows</H3>
-The capture area is described by a <b>struct video_window</b>. This defines
-a capture area and the clipping information if relevant. The 
-<b>VIDIOCGWIN</b> ioctl recovers the current settings and the 
-<b>VIDIOCSWIN</b> sets new values. A successful call to <b>VIDIOCSWIN</b> 
-indicates that a suitable set of parameters have been chosen. They do not
-indicate that exactly what was requested was granted. The program should
-call <b>VIDIOCGWIN</b> to check if the nearest match was suitable. The
-<b>struct video_window</b> contains the following fields.
-<P>
-<TABLE>
-<TR><TD><b>x</b><TD>The X co-ordinate specified in X windows format.</TD>
-<TR><TD><b>y</b><TD>The Y co-ordinate specified in X windows format.</TD>
-<TR><TD><b>width</b><TD>The width of the image capture.</TD>
-<TR><TD><b>height</b><TD>The height of the image capture.</TD>
-<TR><TD><b>chromakey</b><TD>A host order RGB32 value for the chroma key.</TD>
-<TR><TD><b>flags</b><TD>Additional capture flags.</TD>
-<TR><TD><b>clips</b><TD>A list of clipping rectangles. <em>(Set only)</em></TD>
-<TR><TD><b>clipcount</b><TD>The number of clipping rectangles. <em>(Set only)</em></TD>
-</TABLE>
-<P>
-Clipping rectangles are passed as an array. Each clip consists of the following
-fields available to the user.
-<P>
-<TABLE>
-<TR><TD><b>x</b></TD><TD>X co-ordinate of rectangle to skip</TD>
-<TR><TD><b>y</b></TD><TD>Y co-ordinate of rectangle to skip</TD>
-<TR><TD><b>width</b></TD><TD>Width of rectangle to skip</TD>
-<TR><TD><b>height</b></TD><TD>Height of rectangle to skip</TD>
-</TABLE>
-<P>
-Merely setting the window does not enable capturing. Overlay capturing
-(i.e. PCI-PCI transfer to the frame buffer of the video card)
-is activated by passing the <b>VIDIOCCAPTURE</b> ioctl a value of 1, and
-disabled by passing it a value of 0. 
-<P>
-Some capture devices can capture a subfield of the image they actually see.
-This is indicated when VIDEO_TYPE_SUBCAPTURE is defined.
-The video_capture describes the time and special subfields to capture.
-The video_capture structure contains the following fields.
-<P>
-<TABLE>
-<TR><TD><b>x</b></TD><TD>X co-ordinate of source rectangle to grab</TD>
-<TR><TD><b>y</b></TD><TD>Y co-ordinate of source rectangle to grab</TD>
-<TR><TD><b>width</b></TD><TD>Width of source rectangle to grab</TD>
-<TR><TD><b>height</b></TD><TD>Height of source rectangle to grab</TD>
-<TR><TD><b>decimation</b></TD><TD>Decimation to apply</TD>
-<TR><TD><b>flags</b></TD><TD>Flag settings for grabbing</TD>
-</TABLE>
-The available flags are
-<P>
-<TABLE>
-<TR><TH>Name</TH><TH>Description</TH>
-<TR><TD><b>VIDEO_CAPTURE_ODD</b><TD>Capture only odd frames</TD>
-<TR><TD><b>VIDEO_CAPTURE_EVEN</b><TD>Capture only even frames</TD>
-</TABLE>
-<P>
-<H3>Video Sources</H3>
-Each video4linux video or audio device captures from one or more 
-source <b>channels</b>. Each channel can be queries with the 
-<b>VDIOCGCHAN</b> ioctl call. Before invoking this function the caller
-must set the channel field to the channel that is being queried. On return
-the <b>struct video_channel</b> is filled in with information about the
-nature of the channel itself.
-<P>
-The <b>VIDIOCSCHAN</b> ioctl takes an integer argument and switches the
-capture to this input. It is not defined whether parameters such as colour
-settings or tuning are maintained across a channel switch. The caller should
-maintain settings as desired for each channel. (This is reasonable as 
-different video inputs may have different properties).
-<P>
-The <b>struct video_channel</b> consists of the following
-<P>
-<TABLE>
-<TR><TD><b>channel</b></TD><TD>The channel number</TD>
-<TR><TD><b>name</b></TD><TD>The input name - preferably reflecting the label
-on the card input itself</TD>
-<TR><TD><b>tuners</b></TD><TD>Number of tuners for this input</TD>
-<TR><TD><b>flags</b></TD><TD>Properties the tuner has</TD>
-<TR><TD><b>type</b></TD><TD>Input type (if known)</TD>
-<TR><TD><b>norm</b><TD>The norm for this channel</TD>
-</TABLE>
-<P>
-The flags defined are
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_VC_TUNER</b><TD>Channel has tuners.</TD>
-<TR><TD><b>VIDEO_VC_AUDIO</b><TD>Channel has audio.</TD>
-<TR><TD><b>VIDEO_VC_NORM</b><TD>Channel has norm setting.</TD>
-</TABLE>
-<P>
-The types defined are
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_TYPE_TV</b><TD>The input is a TV input.</TD>
-<TR><TD><b>VIDEO_TYPE_CAMERA</b><TD>The input is a camera.</TD>
-</TABLE>
-<P>
-<H3>Image Properties</H3>
-The image properties of the picture can be queried with the <b>VIDIOCGPICT</b>
-ioctl which fills in a <b>struct video_picture</b>. The <b>VIDIOCSPICT</b> 
-ioctl allows values to be changed. All values except for the palette type
-are scaled between 0-65535. 
-<P>
-The <b>struct video_picture</b> consists of the following fields
-<P>
-<TABLE>
-<TR><TD><b>brightness</b><TD>Picture brightness</TD>
-<TR><TD><b>hue</b><TD>Picture hue (colour only)</TD>
-<TR><TD><b>colour</b><TD>Picture colour (colour only)</TD>
-<TR><TD><b>contrast</b><TD>Picture contrast</TD>
-<TR><TD><b>whiteness</b><TD>The whiteness (greyscale only)</TD>
-<TR><TD><b>depth</b><TD>The capture depth (may need to match the frame buffer depth)</TD>
-<TR><TD><b>palette</b><TD>Reports the palette that should be used for this image</TD>
-</TABLE>
-<P>
-The following palettes are defined
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_PALETTE_GREY</b><TD>Linear intensity grey scale (255 is brightest).</TD>
-<TR><TD><b>VIDEO_PALETTE_HI240</b><TD>The BT848 8bit colour cube.</TD>
-<TR><TD><b>VIDEO_PALETTE_RGB565</b><TD>RGB565 packed into 16 bit words.</TD>
-<TR><TD><b>VIDEO_PALETTE_RGB555</b><TD>RGV555 packed into 16 bit words, top bit undefined.</TD>
-<TR><TD><b>VIDEO_PALETTE_RGB24</b><TD>RGB888 packed into 24bit words.</TD>
-<TR><TD><b>VIDEO_PALETTE_RGB32</b><TD>RGB888 packed into the low 3 bytes of 32bit words. The top 8bits are undefined.</TD>
-<TR><TD><b>VIDEO_PALETTE_YUV422</b><TD>Video style YUV422 - 8bits packed 4bits Y 2bits U 2bits V</TD>
-<TR><TD><b>VIDEO_PALETTE_YUYV</b><TD>Describe me</TD>
-<TR><TD><b>VIDEO_PALETTE_UYVY</b><TD>Describe me</TD>
-<TR><TD><b>VIDEO_PALETTE_YUV420</b><TD>YUV420 capture</TD>
-<TR><TD><b>VIDEO_PALETTE_YUV411</b><TD>YUV411 capture</TD>
-<TR><TD><b>VIDEO_PALETTE_RAW</b><TD>RAW capture (BT848)</TD>
-<TR><TD><b>VIDEO_PALETTE_YUV422P</b><TD>YUV 4:2:2 Planar</TD>
-<TR><TD><b>VIDEO_PALETTE_YUV411P</b><TD>YUV 4:1:1 Planar</TD>
-</TABLE>
-<P>
-<H3>Tuning</H3>
-Each video input channel can have one or more tuners associated with it. Many
-devices will not have tuners. TV cards and radio cards will have one or more
-tuners attached.
-<P>
-Tuners are described by a <b>struct video_tuner</b> which can be obtained by
-the <b>VIDIOCGTUNER</b> ioctl. Fill in the tuner number in the structure
-then pass the structure to the ioctl to have the data filled in. The 
-tuner can be switched using <b>VIDIOCSTUNER</b> which takes an integer argument
-giving the tuner to use. A struct tuner has the following fields
-<P>
-<TABLE>
-<TR><TD><b>tuner</b><TD>Number of the tuner</TD>
-<TR><TD><b>name</b><TD>Canonical name for this tuner (eg FM/AM/TV)</TD>
-<TR><TD><b>rangelow</b><TD>Lowest tunable frequency</TD>
-<TR><TD><b>rangehigh</b><TD>Highest tunable frequency</TD>
-<TR><TD><b>flags</b><TD>Flags describing the tuner</TD>
-<TR><TD><b>mode</b><TD>The video signal mode if relevant</TD>
-<TR><TD><b>signal</b><TD>Signal strength if known - between 0-65535</TD>
-</TABLE>
-<P>
-The following flags exist
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_TUNER_PAL</b><TD>PAL tuning is supported</TD>
-<TR><TD><b>VIDEO_TUNER_NTSC</b><TD>NTSC tuning is supported</TD>
-<TR><TD><b>VIDEO_TUNER_SECAM</b><TD>SECAM tuning is supported</TD>
-<TR><TD><b>VIDEO_TUNER_LOW</b><TD>Frequency is in a lower range</TD>
-<TR><TD><b>VIDEO_TUNER_NORM</b><TD>The norm for this tuner is settable</TD>
-<TR><TD><b>VIDEO_TUNER_STEREO_ON</b><TD>The tuner is seeing stereo audio</TD>
-<TR><TD><b>VIDEO_TUNER_RDS_ON</b><TD>The tuner is seeing a RDS datastream</TD>
-<TR><TD><b>VIDEO_TUNER_MBS_ON</b><TD>The tuner is seeing a MBS datastream</TD>
-</TABLE>
-<P>
-The following modes are defined
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_MODE_PAL</b><TD>The tuner is in PAL mode</TD>
-<TR><TD><b>VIDEO_MODE_NTSC</b><TD>The tuner is in NTSC mode</TD>
-<TR><TD><b>VIDEO_MODE_SECAM</b><TD>The tuner is in SECAM mode</TD>
-<TR><TD><b>VIDEO_MODE_AUTO</b><TD>The tuner auto switches, or mode does not apply</TD>
-</TABLE>
-<P>
-Tuning frequencies are an unsigned 32bit value in 1/16th MHz or if the
-<b>VIDEO_TUNER_LOW</b> flag is set they are in 1/16th KHz. The current
-frequency is obtained as an unsigned long via the <b>VIDIOCGFREQ</b> ioctl and
-set by the <b>VIDIOCSFREQ</b> ioctl.
-<P>
-<H3>Audio</H3>
-TV and Radio devices have one or more audio inputs that may be selected. 
-The audio properties are queried by passing a <b>struct video_audio</b> to <b>VIDIOCGAUDIO</b> ioctl. The
-<b>VIDIOCSAUDIO</b> ioctl sets audio properties.
-<P>
-The structure contains the following fields
-<P>
-<TABLE>
-<TR><TD><b>audio</b><TD>The channel number</TD>
-<TR><TD><b>volume</b><TD>The volume level</TD>
-<TR><TD><b>bass</b><TD>The bass level</TD>
-<TR><TD><b>treble</b><TD>The treble level</TD>
-<TR><TD><b>flags</b><TD>Flags describing the audio channel</TD>
-<TR><TD><b>name</b><TD>Canonical name for the audio input</TD>
-<TR><TD><b>mode</b><TD>The mode the audio input is in</TD>
-<TR><TD><b>balance</b><TD>The left/right balance</TD>
-<TR><TD><b>step</b><TD>Actual step used by the hardware</TD>
-</TABLE>
-<P>
-The following flags are defined
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_AUDIO_MUTE</b><TD>The audio is muted</TD>
-<TR><TD><b>VIDEO_AUDIO_MUTABLE</b><TD>Audio muting is supported</TD>
-<TR><TD><b>VIDEO_AUDIO_VOLUME</b><TD>The volume is controllable</TD>
-<TR><TD><b>VIDEO_AUDIO_BASS</b><TD>The bass is controllable</TD>
-<TR><TD><b>VIDEO_AUDIO_TREBLE</b><TD>The treble is controllable</TD>
-<TR><TD><b>VIDEO_AUDIO_BALANCE</b><TD>The balance is controllable</TD>
-</TABLE>
-<P>
-The following decoding modes are defined
-<P>
-<TABLE>
-<TR><TD><b>VIDEO_SOUND_MONO</b><TD>Mono signal</TD>
-<TR><TD><b>VIDEO_SOUND_STEREO</b><TD>Stereo signal (NICAM for TV)</TD>
-<TR><TD><b>VIDEO_SOUND_LANG1</b><TD>European TV alternate language 1</TD>
-<TR><TD><b>VIDEO_SOUND_LANG2</b><TD>European TV alternate language 2</TD>
-</TABLE>
-<P>
-<H3>Reading Images</H3>
-Each call to the <b>read</b> syscall returns the next available image
-from the device. It is up to the caller to set format and size (using
-the VIDIOCSPICT and VIDIOCSWIN ioctls) and then to pass a suitable
-size buffer and length to the function. Not all devices will support
-read operations.
-<P>
-A second way to handle image capture is via the mmap interface if supported.
-To use the mmap interface a user first sets the desired image size and depth
-properties. Next the VIDIOCGMBUF ioctl is issued. This reports the size
-of buffer to mmap and the offset within the buffer for each frame. The
-number of frames supported is device dependent and may only be one. 
-<P>
-The video_mbuf structure contains the following fields
-<P>
-<TABLE>
-<TR><TD><b>size</b><TD>The number of bytes to map</TD>
-<TR><TD><b>frames</b><TD>The number of frames</TD>
-<TR><TD><b>offsets</b><TD>The offset of each frame</TD>
-</TABLE>
-<P>
-Once the mmap has been made the VIDIOCMCAPTURE ioctl starts the
-capture to a frame using the format and image size specified in the
-video_mmap (which should match or be below the initial query size).
-When the VIDIOCMCAPTURE ioctl returns the frame is <em>not</em>
-captured yet, the driver just instructed the hardware to start the
-capture.  The application has to use the VIDIOCSYNC ioctl to wait
-until the capture of a frame is finished.  VIDIOCSYNC takes the frame
-number you want to wait for as argument.
-<p>
-It is allowed to call VIDIOCMCAPTURE multiple times (with different
-frame numbers in video_mmap->frame of course) and thus have multiple
-outstanding capture requests.  A simple way do to double-buffering
-using this feature looks like this:
-<pre>
-/* setup everything */
-VIDIOCMCAPTURE(0)
-while (whatever) {
-   VIDIOCMCAPTURE(1)
-   VIDIOCSYNC(0)
-   /* process frame 0 while the hardware captures frame 1 */
-   VIDIOCMCAPTURE(0)
-   VIDIOCSYNC(1)
-   /* process frame 1 while the hardware captures frame 0 */
-}
-</pre>
-Note that you are <em>not</em> limited to only two frames.  The API
-allows up to 32 frames, the VIDIOCGMBUF ioctl returns the number of
-frames the driver granted.  Thus it is possible to build deeper queues
-to avoid loosing frames on load peaks.
-<p>
-While capturing to memory the driver will make a "best effort" attempt
-to capture to screen as well if requested. This normally means all
-frames that "miss" memory mapped capture will go to the display.
-<P>
-A final ioctl exists to allow a device to obtain related devices if a
-driver has multiple components (for example video0 may not be associated
-with vbi0 which would cause an intercast display program to make a bad
-mistake). The VIDIOCGUNIT ioctl reports the unit numbers of the associated
-devices if any exist. The video_unit structure has the following fields.
-<P>
-<TABLE>
-<TR><TD><b>video</b><TD>Video capture device</TD>
-<TR><TD><b>vbi</b><TD>VBI capture device</TD>
-<TR><TD><b>radio</b><TD>Radio device</TD>
-<TR><TD><b>audio</b><TD>Audio mixer</TD>
-<TR><TD><b>teletext</b><TD>Teletext device</TD>
-</TABLE>
-<P>
-<H3>RDS Datastreams</H3>
-For radio devices that support it, it is possible to receive Radio Data
-System (RDS) data by means of a read() on the device.  The data is packed in
-groups of three, as follows:
-<TABLE>
-<TR><TD>First Octet</TD><TD>Least Significant Byte of RDS Block</TD></TR>
-<TR><TD>Second Octet</TD><TD>Most Significant Byte of RDS Block
-<TR><TD>Third Octet</TD><TD>Bit 7:</TD><TD>Error bit.  Indicates that
-an uncorrectable error occurred during reception of this block.</TD></TR>
-<TR><TD>&nbsp;</TD><TD>Bit 6:</TD><TD>Corrected bit.  Indicates that  
-an error was corrected for this data block.</TD></TR>
-<TR><TD>&nbsp;</TD><TD>Bits 5-3:</TD><TD>Received Offset.  Indicates the  
-offset received by the sync system.</TD></TR>
-<TR><TD>&nbsp;</TD><TD>Bits 2-0:</TD><TD>Offset Name.  Indicates the  
-offset applied to this data.</TD></TR>
-</TABLE>
-</BODY>
-</HTML>
+<TITLE>V4L API</TITLE>
+<H1>Video For Linux APIs</H1>
+<table border=0>
+<tr>
+<td>
+<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L1_API.html>
+V4L original API</a>
+</td><td>
+Obsoleted by V4L2 API
+</td></tr><tr><td>
+<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L2_API.html>
+V4L2 API</a>
+</td><td>
+Should be used for new projects
+</td></tr>
+</table>
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 216f705..4377aa1 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -13,17 +13,17 @@
 card=12 - ASUS PVR-416
 card=13 - MSI TV-@nywhere
 card=14 - KWorld/VStream XPert DVB-T
-card=15 - DVICO FusionHDTV DVB-T1
+card=15 - DViCO FusionHDTV DVB-T1
 card=16 - KWorld LTV883RF
-card=17 - DViCO - FusionHDTV 3 Gold
+card=17 - DViCO FusionHDTV 3 Gold-Q
 card=18 - Hauppauge Nova-T DVB-T
 card=19 - Conexant DVB-T reference design
 card=20 - Provideo PV259
-card=21 - DVICO FusionHDTV DVB-T Plus
+card=21 - DViCO FusionHDTV DVB-T Plus
 card=22 - digitalnow DNTV Live! DVB-T
 card=23 - pcHDTV HD3000 HDTV
 card=24 - Hauppauge WinTV 28xxx (Roslyn) models
 card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
 card=26 - IODATA GV/BCTV7E
 card=27 - PixelView PlayTV Ultra Pro (Stereo)
-card=28 - DViCO - FusionHDTV 3 Gold-T
+card=28 - DViCO FusionHDTV 3 Gold-T
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index d5ed95d..735e8ba 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -54,3 +54,9 @@
  55 -> LifeView FlyDVB-T DUO                    [5168:0306]
  56 -> Avermedia AVerTV 307                     [1461:a70a]
  57 -> Avermedia AVerTV GO 007 FM               [1461:f31f]
+ 58 -> ADS Tech Instant TV (saa7135)            [1421:0350,1421:0370]
+ 59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
+ 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus
+ 61 -> Philips TOUGH DVB-T reference design
+ 62 -> Compro VideoMate TV Gold+II
+ 63 -> Kworld Xpert TV PVR7134
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index aeb8df8..e78020f 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -59,3 +59,6 @@
 tuner=58 - Ymec TVision TVF-8531MF
 tuner=59 - Ymec TVision TVF-5533MF
 tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
+tuner=61 - Tena TNF9533-D/IF
+tuner=62 - Philips TEA5767HN FM Radio
+tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
diff --git a/Documentation/video4linux/README.saa7134 b/Documentation/video4linux/README.saa7134
index 1a446c6..1f788e4 100644
--- a/Documentation/video4linux/README.saa7134
+++ b/Documentation/video4linux/README.saa7134
@@ -57,6 +57,15 @@
  - 24.576MHz -> .audio_clock=0x200000
 (xtal * .audio_clock = 51539600)
 
+Some details about 30/34/35:
+
+ - saa7130 - low-price chip, doesn't have mute, that is why all those
+ cards should have .mute field defined in their tuner structure.
+
+ - saa7134 - usual chip
+
+ - saa7133/35 - saa7135 is probably a marketing decision, since all those
+ chips identifies itself as 33 on pci.
 
 Credits
 =======
diff --git a/MAINTAINERS b/MAINTAINERS
index 4db63de..19a9a1c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -512,11 +512,11 @@
 S:	Supported
 
 BTTV VIDEO4LINUX DRIVER
-P:	Gerd Knorr
-M:	kraxel@bytesex.org
+P:	Mauro Carvalho Chehab
+M:	mchehab@brturbo.com.br
 L:	video4linux-list@redhat.com
-W:	http://bytesex.org/bttv/
-S:	Orphan
+W:	http://linuxtv.org
+S:	Maintained
 
 BUSLOGIC SCSI DRIVER
 P:	Leonard N. Zubkoff
@@ -2625,10 +2625,11 @@
 S:	Maintained
 
 VIDEO FOR LINUX
-P:	Gerd Knorr
-M:	kraxel@bytesex.org
+P:	Mauro Carvalho Chehab
+M:	mchehab@brturbo.com.br
 L:	video4linux-list@redhat.com
-S:	Orphan
+W:	http://linuxtv.org
+S:	Maintained
 
 W1 DALLAS'S 1-WIRE BUS
 P:	Evgeniy Polyakov
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8d94dc..620f2ca 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -361,6 +361,11 @@
 	  Alternatively, if you want dynamic tick automatically enabled
 	  during boot, pass "dyntick=enable" via the kernel command string.
 
+	  Please note that dynamic tick may affect the accuracy of
+	  timekeeping on some platforms depending on the implementation.
+	  Currently at least OMAP platform is known to have accurate
+	  timekeeping with dynamic tick.
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index b668c48..cf9f46d 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -40,8 +40,11 @@
  *   04-Nov-2004  Ben Dooks
  *		  Fix standard IRQ wake for EINT0..4 and RTC
  *
- *   22-Feb-2004  Ben Dooks
+ *   22-Feb-2005  Ben Dooks
  *		  Fixed edge-triggering on ADC IRQ
+ *
+ *   28-Jun-2005  Ben Dooks
+ *		  Mark IRQ_LCD valid
 */
 
 #include <linux/init.h>
@@ -366,7 +369,6 @@
 #define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
 #define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
 #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-#define INTMSK_LCD	 (1UL << (IRQ_LCD - IRQ_EINT0))
 
 static inline void
 s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
@@ -716,7 +718,6 @@
 		case IRQ_UART0:
 		case IRQ_UART1:
 		case IRQ_UART2:
-		case IRQ_LCD:
 		case IRQ_ADCPARENT:
 			set_irq_chip(irqno, &s3c_irq_level_chip);
 			set_irq_handler(irqno, do_level_IRQ);
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index ba1a6e9..8ffb523 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
-oprofile-y				:= $(DRIVER_OBJS) init.o
+oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
 oprofile-$(CONFIG_CPU_XSCALE)		+= common.o op_model_xscale.o
 
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
new file mode 100644
index 0000000..ec58d3e
--- /dev/null
+++ b/arch/arm/oprofile/backtrace.c
@@ -0,0 +1,144 @@
+/*
+ * Arm specific backtracing code for oprofile
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * Based on i386 oprofile backtrace code by John Levon, David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ */
+struct frame_tail {
+	struct frame_tail *fp;
+	unsigned long sp;
+	unsigned long lr;
+} __attribute__((packed));
+
+
+#ifdef CONFIG_FRAME_POINTER
+static struct frame_tail* kernel_backtrace(struct frame_tail *tail)
+{
+	oprofile_add_trace(tail->lr);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (tail >= tail->fp)
+		return NULL;
+
+	return tail->fp-1;
+}
+#endif
+
+static struct frame_tail* user_backtrace(struct frame_tail *tail)
+{
+	struct frame_tail buftail;
+
+	/* hardware pte might not be valid due to dirty/accessed bit emulation
+	 * so we use copy_from_user and benefit from exception fixups */
+	if (copy_from_user(&buftail, tail, sizeof(struct frame_tail)))
+		return NULL;
+
+	oprofile_add_trace(buftail.lr);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (tail >= buftail.fp)
+		return NULL;
+
+	return buftail.fp-1;
+}
+
+/* Compare two addresses and see if they're on the same page */
+#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \
+	== ((((unsigned long) y) + offset) >> PAGE_SHIFT))
+
+/* check that the page(s) containing the frame tail are present */
+static int pages_present(struct frame_tail *tail)
+{
+	struct mm_struct * mm = current->mm;
+
+	if (!check_user_page_readable(mm, (unsigned long)tail))
+		return 0;
+
+	if (CMP_ADDR_EQUAL(tail, tail, 8))
+		return 1;
+
+	if (!check_user_page_readable(mm, ((unsigned long)tail) + 8))
+		return 0;
+
+	return 1;
+}
+
+/*
+ * |             | /\ Higher addresses
+ * |             |
+ * --------------- stack base (address of current_thread_info)
+ * | thread info |
+ * .             .
+ * |    stack    |
+ * --------------- saved regs->ARM_fp value if valid (frame_tail address)
+ * .             .
+ * --------------- struct pt_regs stored on stack (struct pt_regs *)
+ * |             |
+ * .             .
+ * |             |
+ * --------------- %esp
+ * |             |
+ * |             | \/ Lower addresses
+ *
+ * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values
+ */
+static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
+{
+	unsigned long tailaddr = (unsigned long)tail;
+	unsigned long stack = (unsigned long)regs;
+	unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
+
+	return (tailaddr > stack) && (tailaddr < stack_base);
+}
+
+void arm_backtrace(struct pt_regs const *regs, unsigned int depth)
+{
+	struct frame_tail *tail;
+	unsigned long last_address = 0;
+
+	tail = ((struct frame_tail *) regs->ARM_fp) - 1;
+
+	if (!user_mode(regs)) {
+
+#ifdef CONFIG_FRAME_POINTER
+		while (depth-- && tail && valid_kernel_stack(tail, regs)) {
+			tail = kernel_backtrace(tail);
+		}
+#endif
+		return;
+	}
+
+	while (depth-- && tail && !((unsigned long) tail & 3)) {
+		if ((!CMP_ADDR_EQUAL(last_address, tail, 0)
+			|| !CMP_ADDR_EQUAL(last_address, tail, 8))
+				&& !pages_present(tail))
+			return;
+		last_address = (unsigned long) tail;
+		tail = user_backtrace(tail);
+	}
+}
+
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
index cce3d30..d315a3a 100644
--- a/arch/arm/oprofile/init.c
+++ b/arch/arm/oprofile/init.c
@@ -20,6 +20,8 @@
 	ret = pmu_init(ops, &op_xscale_spec);
 #endif
 
+	ops->backtrace = arm_backtrace;
+
 	return ret;
 }
 
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2d4caf4..2148d07 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -24,6 +24,8 @@
 extern struct op_arm_model_spec op_xscale_spec;
 #endif
 
+extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
+
 extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
 extern void pmu_exit(void);
 #endif /* OP_ARM_MODEL_H */
diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c
index 4a17956..6835f6d 100644
--- a/arch/i386/boot/tools/build.c
+++ b/arch/i386/boot/tools/build.c
@@ -70,7 +70,8 @@
 
 int main(int argc, char ** argv)
 {
-	unsigned int i, c, sz, setup_sectors;
+	unsigned int i, sz, setup_sectors;
+	int c;
 	u32 sys_size;
 	byte major_root, minor_root;
 	struct stat sb;
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 9f63ae0..b7808a8 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -159,9 +159,15 @@
 #endif
 
 #ifdef CONFIG_PCI_MMCONFIG
-static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
+struct acpi_table_mcfg_config *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 {
 	struct acpi_table_mcfg *mcfg;
+	unsigned long i;
+	int config_size;
 
 	if (!phys_addr || !size)
 		return -EINVAL;
@@ -172,18 +178,38 @@
 		return -ENODEV;
 	}
 
-	if (mcfg->base_reserved) {
-		printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+	/* how many config structures do we have */
+	pci_mmcfg_config_num = 0;
+	i = size - sizeof(struct acpi_table_mcfg);
+	while (i >= sizeof(struct acpi_table_mcfg_config)) {
+		++pci_mmcfg_config_num;
+		i -= sizeof(struct acpi_table_mcfg_config);
+	};
+	if (pci_mmcfg_config_num == 0) {
+		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
 		return -ENODEV;
 	}
 
-	pci_mmcfg_base_addr = mcfg->base_address;
+	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+	if (!pci_mmcfg_config) {
+		printk(KERN_WARNING PREFIX
+		       "No memory for MCFG config tables\n");
+		return -ENOMEM;
+	}
+
+	memcpy(pci_mmcfg_config, &mcfg->config, config_size);
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		if (mcfg->config[i].base_reserved) {
+			printk(KERN_ERR PREFIX
+			       "MMCONFIG not in low 4GB of memory\n");
+			return -ENODEV;
+		}
+	}
 
 	return 0;
 }
-#else
-#define	acpi_parse_mcfg NULL
-#endif /* !CONFIG_PCI_MMCONFIG */
+#endif /* CONFIG_PCI_MMCONFIG */
 
 #ifdef CONFIG_X86_LOCAL_APIC
 static int __init
@@ -507,6 +533,22 @@
 EXPORT_SYMBOL(acpi_unmap_lsapic);
 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
 
+int
+acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int
+acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
 static unsigned long __init
 acpi_scan_rsdp (
 	unsigned long		start,
@@ -1123,7 +1165,6 @@
 	acpi_process_madt();
 
 	acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
-	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
 
 	return 0;
 }
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 720975e..8732526 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -25,7 +25,8 @@
 
 int pci_routeirq;
 int pcibios_last_bus = -1;
-struct pci_bus *pci_root_bus = NULL;
+unsigned long pirq_table_addr;
+struct pci_bus *pci_root_bus;
 struct pci_raw_ops *raw_pci_ops;
 
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
@@ -133,7 +134,7 @@
 
 	printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
 
-	return pci_scan_bus(busnum, &pci_root_ops, NULL);
+	return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL);
 }
 
 extern u8 pci_cache_line_size;
@@ -188,6 +189,9 @@
 	} else if (!strcmp(str, "biosirq")) {
 		pci_probe |= PCI_BIOS_IRQ_SCAN;
 		return NULL;
+	} else if (!strncmp(str, "pirqaddr=", 9)) {
+		pirq_table_addr = simple_strtoul(str+9, NULL, 0);
+		return NULL;
 	}
 #endif
 #ifdef CONFIG_PCI_DIRECT
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index 83458f8..78ca1ec 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -58,6 +58,35 @@
 int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
 
 /*
+ *  Check passed address for the PCI IRQ Routing Table signature
+ *  and perform checksum verification.
+ */
+
+static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+{
+	struct irq_routing_table *rt;
+	int i;
+	u8 sum;
+
+	rt = (struct irq_routing_table *) addr;
+	if (rt->signature != PIRQ_SIGNATURE ||
+	    rt->version != PIRQ_VERSION ||
+	    rt->size % 16 ||
+	    rt->size < sizeof(struct irq_routing_table))
+		return NULL;
+	sum = 0;
+	for (i=0; i < rt->size; i++)
+		sum += addr[i];
+	if (!sum) {
+		DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		return rt;
+	}
+	return NULL;
+}
+
+
+
+/*
  *  Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
  */
 
@@ -65,23 +94,17 @@
 {
 	u8 *addr;
 	struct irq_routing_table *rt;
-	int i;
-	u8 sum;
 
-	for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
-		rt = (struct irq_routing_table *) addr;
-		if (rt->signature != PIRQ_SIGNATURE ||
-		    rt->version != PIRQ_VERSION ||
-		    rt->size % 16 ||
-		    rt->size < sizeof(struct irq_routing_table))
-			continue;
-		sum = 0;
-		for(i=0; i<rt->size; i++)
-			sum += addr[i];
-		if (!sum) {
-			DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+	if (pirq_table_addr) {
+		rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr));
+		if (rt)
 			return rt;
-		}
+		printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
+	}
+	for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+		rt = pirq_check_routing_table(addr);
+		if (rt)
+			return rt;
 	}
 	return NULL;
 }
diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c
index 1492e37..149a958 100644
--- a/arch/i386/pci/legacy.c
+++ b/arch/i386/pci/legacy.c
@@ -45,6 +45,8 @@
 
 	printk("PCI: Probing PCI hardware\n");
 	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
 
 	pcibios_fixup_peer_bridges();
 
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 021a50a..60f0e7a 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -11,11 +11,9 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-u32 pci_mmcfg_base_addr;
-
 #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
 
 /* The base address of the last MMCONFIG device accessed */
@@ -24,10 +22,31 @@
 /*
  * Functions for accessing PCI configuration space with MMCONFIG accesses
  */
-
-static inline void pci_exp_set_dev_base(int bus, int devfn)
+static u32 get_base_addr(unsigned int seg, int bus)
 {
-	u32 dev_base = pci_mmcfg_base_addr | (bus << 20) | (devfn << 12);
+	int cfg_num = -1;
+	struct acpi_table_mcfg_config *cfg;
+
+	while (1) {
+		++cfg_num;
+		if (cfg_num >= pci_mmcfg_config_num) {
+			/* something bad is going on, no cfg table is found. */
+			/* so we fall back to the old way we used to do this */
+			/* and just rely on the first entry to be correct. */
+			return pci_mmcfg_config[0].base_address;
+		}
+		cfg = &pci_mmcfg_config[cfg_num];
+		if (cfg->pci_segment_group_number != seg)
+			continue;
+		if ((cfg->start_bus_number <= bus) &&
+		    (cfg->end_bus_number >= bus))
+			return cfg->base_address;
+	}
+}
+
+static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn)
+{
+	u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12);
 	if (dev_base != mmcfg_last_accessed_device) {
 		mmcfg_last_accessed_device = dev_base;
 		set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
@@ -44,7 +63,7 @@
 
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(bus, devfn);
+	pci_exp_set_dev_base(seg, bus, devfn);
 
 	switch (len) {
 	case 1:
@@ -73,7 +92,7 @@
 
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(bus, devfn);
+	pci_exp_set_dev_base(seg, bus, devfn);
 
 	switch (len) {
 	case 1:
@@ -101,7 +120,11 @@
 {
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		goto out;
-	if (!pci_mmcfg_base_addr)
+
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].base_address == 0))
 		goto out;
 
 	/* Kludge for now. Don't use mmconfig on AMD systems because
diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c
index 9e36954..adbe17a 100644
--- a/arch/i386/pci/numa.c
+++ b/arch/i386/pci/numa.c
@@ -115,6 +115,8 @@
 		return 0;
 
 	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
 	if (num_online_nodes() > 1)
 		for_each_online_node(quad) {
 			if (quad == 0)
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index a8fc80c..a80f0f5 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -27,6 +27,7 @@
 #define PCI_ASSIGN_ALL_BUSSES	0x4000
 
 extern unsigned int pci_probe;
+extern unsigned long pirq_table_addr;
 
 /* pci-i386.c */
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 72dfd9e..cda06f8 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -236,9 +236,7 @@
 	if (BAD_MADT_ENTRY(iosapic, end))
 		return -EINVAL;
 
-	iosapic_init(iosapic->address, iosapic->global_irq_base);
-
-	return 0;
+	return iosapic_init(iosapic->address, iosapic->global_irq_base);
 }
 
 
@@ -772,7 +770,7 @@
  
 
 #ifdef CONFIG_ACPI_NUMA
-acpi_status __init
+acpi_status __devinit
 acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
@@ -825,4 +823,28 @@
 	return AE_OK;
 }
 #endif /* CONFIG_NUMA */
+
+int
+acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	int err;
+
+	if ((err = iosapic_init(phys_addr, gsi_base)))
+		return err;
+
+#if CONFIG_ACPI_NUMA
+	acpi_map_iosapic(handle, 0, NULL, NULL);
+#endif /* CONFIG_ACPI_NUMA */
+
+	return 0;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int
+acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base)
+{
+	return iosapic_remove(gsi_base);
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
 #endif /* CONFIG_ACPI_BOOT */
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 88b0143..c170be0 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -129,14 +129,13 @@
 	char __iomem	*addr;		/* base address of IOSAPIC */
 	unsigned int 	gsi_base;	/* first GSI assigned to this IOSAPIC */
 	unsigned short 	num_rte;	/* number of RTE in this IOSAPIC */
+	int		rtes_inuse;	/* # of RTEs in use on this IOSAPIC */
 #ifdef CONFIG_NUMA
 	unsigned short	node;		/* numa node association via pxm */
 #endif
 } iosapic_lists[NR_IOSAPICS];
 
-static int num_iosapic;
-
-static unsigned char pcat_compat __initdata;	/* 8259 compatibility flag */
+static unsigned char pcat_compat __devinitdata;	/* 8259 compatibility flag */
 
 static int iosapic_kmalloc_ok;
 static LIST_HEAD(free_rte_list);
@@ -149,7 +148,7 @@
 {
 	int i;
 
-	for (i = 0; i < num_iosapic; i++) {
+	for (i = 0; i < NR_IOSAPICS; i++) {
 		if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte)
 			return i;
 	}
@@ -598,6 +597,7 @@
 		rte->refcnt++;
 		list_add_tail(&rte->rte_list, &iosapic_intr_info[vector].rtes);
 		iosapic_intr_info[vector].count++;
+		iosapic_lists[index].rtes_inuse++;
 	}
 	else if (vector_is_shared(vector)) {
 		struct iosapic_intr_info *info = &iosapic_intr_info[vector];
@@ -778,7 +778,7 @@
 iosapic_unregister_intr (unsigned int gsi)
 {
 	unsigned long flags;
-	int irq, vector;
+	int irq, vector, index;
 	irq_desc_t *idesc;
 	u32 low32;
 	unsigned long trigger, polarity;
@@ -819,6 +819,9 @@
 		list_del(&rte->rte_list);
 		iosapic_intr_info[vector].count--;
 		iosapic_free_rte(rte);
+		index = find_iosapic(gsi);
+		iosapic_lists[index].rtes_inuse--;
+		WARN_ON(iosapic_lists[index].rtes_inuse < 0);
 
 		trigger	 = iosapic_intr_info[vector].trigger;
 		polarity = iosapic_intr_info[vector].polarity;
@@ -952,30 +955,86 @@
 	}
 }
 
-void __init
+static inline int
+iosapic_alloc (void)
+{
+	int index;
+
+	for (index = 0; index < NR_IOSAPICS; index++)
+		if (!iosapic_lists[index].addr)
+			return index;
+
+	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+	return -1;
+}
+
+static inline void
+iosapic_free (int index)
+{
+	memset(&iosapic_lists[index], 0, sizeof(iosapic_lists[0]));
+}
+
+static inline int
+iosapic_check_gsi_range (unsigned int gsi_base, unsigned int ver)
+{
+	int index;
+	unsigned int gsi_end, base, end;
+
+	/* check gsi range */
+	gsi_end = gsi_base + ((ver >> 16) & 0xff);
+	for (index = 0; index < NR_IOSAPICS; index++) {
+		if (!iosapic_lists[index].addr)
+			continue;
+
+		base = iosapic_lists[index].gsi_base;
+		end  = base + iosapic_lists[index].num_rte - 1;
+
+		if (gsi_base < base && gsi_end < base)
+			continue;/* OK */
+
+		if (gsi_base > end && gsi_end > end)
+			continue; /* OK */
+
+		return -EBUSY;
+	}
+	return 0;
+}
+
+int __devinit
 iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 {
-	int num_rte;
+	int num_rte, err, index;
 	unsigned int isa_irq, ver;
 	char __iomem *addr;
+	unsigned long flags;
 
-	addr = ioremap(phys_addr, 0);
-	ver = iosapic_version(addr);
+	spin_lock_irqsave(&iosapic_lock, flags);
+	{
+		addr = ioremap(phys_addr, 0);
+		ver = iosapic_version(addr);
 
-	/*
-	 * The MAX_REDIR register holds the highest input pin
-	 * number (starting from 0).
-	 * We add 1 so that we can use it for number of pins (= RTEs)
-	 */
-	num_rte = ((ver >> 16) & 0xff) + 1;
+		if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
+			iounmap(addr);
+			spin_unlock_irqrestore(&iosapic_lock, flags);
+			return err;
+		}
 
-	iosapic_lists[num_iosapic].addr = addr;
-	iosapic_lists[num_iosapic].gsi_base = gsi_base;
-	iosapic_lists[num_iosapic].num_rte = num_rte;
+		/*
+		 * The MAX_REDIR register holds the highest input pin
+		 * number (starting from 0).
+		 * We add 1 so that we can use it for number of pins (= RTEs)
+		 */
+		num_rte = ((ver >> 16) & 0xff) + 1;
+
+		index = iosapic_alloc();
+		iosapic_lists[index].addr = addr;
+		iosapic_lists[index].gsi_base = gsi_base;
+		iosapic_lists[index].num_rte = num_rte;
 #ifdef CONFIG_NUMA
-	iosapic_lists[num_iosapic].node = MAX_NUMNODES;
+		iosapic_lists[index].node = MAX_NUMNODES;
 #endif
-	num_iosapic++;
+	}
+	spin_unlock_irqrestore(&iosapic_lock, flags);
 
 	if ((gsi_base == 0) && pcat_compat) {
 		/*
@@ -986,10 +1045,43 @@
 		for (isa_irq = 0; isa_irq < 16; ++isa_irq)
 			iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE);
 	}
+	return 0;
 }
 
+#ifdef CONFIG_HOTPLUG
+int
+iosapic_remove (unsigned int gsi_base)
+{
+	int index, err = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	{
+		index = find_iosapic(gsi_base);
+		if (index < 0) {
+			printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
+			       __FUNCTION__, gsi_base);
+			goto out;
+		}
+
+		if (iosapic_lists[index].rtes_inuse) {
+			err = -EBUSY;
+			printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
+			       __FUNCTION__, gsi_base);
+			goto out;
+		}
+
+		iounmap(iosapic_lists[index].addr);
+		iosapic_free(index);
+	}
+ out:
+	spin_unlock_irqrestore(&iosapic_lock, flags);
+	return err;
+}
+#endif /* CONFIG_HOTPLUG */
+
 #ifdef CONFIG_NUMA
-void __init
+void __devinit
 map_iosapic_to_node(unsigned int gsi_base, int node)
 {
 	int index;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index e3fc4ed..720a861 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -312,7 +312,7 @@
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
 			&info);
 
-	pbus = pci_scan_bus(bus, &pci_root_ops, controller);
+	pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
 	if (pbus)
 		pcibios_setup_root_windows(pbus, controller);
 
@@ -373,6 +373,25 @@
 	res->end = region->end + offset;
 }
 
+static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
+{
+	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+	struct resource *devr = &dev->resource[idx];
+
+	if (!dev->bus)
+		return 0;
+	for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
+		struct resource *busr = dev->bus->resource[i];
+
+		if (!busr || ((busr->flags ^ devr->flags) & type_mask))
+			continue;
+		if ((devr->start) && (devr->start >= busr->start) &&
+				(devr->end <= busr->end))
+			return 1;
+	}
+	return 0;
+}
+
 static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 {
 	struct pci_bus_region region;
@@ -386,7 +405,8 @@
 		region.start = dev->resource[i].start;
 		region.end = dev->resource[i].end;
 		pcibios_bus_to_resource(dev, &dev->resource[i], &region);
-		pci_claim_resource(dev, i);
+		if ((is_valid_resource(dev, i)))
+			pci_claim_resource(dev, i);
 	}
 }
 
@@ -398,6 +418,10 @@
 {
 	struct pci_dev *dev;
 
+	if (b->self) {
+		pci_read_bridge_bases(b);
+		pcibios_fixup_device_resources(b->self);
+	}
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
 
@@ -418,18 +442,24 @@
 	u16 cmd, old_cmd;
 	int idx;
 	struct resource *r;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
 
 	if (!dev)
 		return -EINVAL;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
+	for (idx=0; idx<PCI_NUM_RESOURCES; idx++) {
 		/* Only set up the desired resources.  */
 		if (!(mask & (1 << idx)))
 			continue;
 
 		r = &dev->resource[idx];
+		if (!(r->flags & type_mask))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
 		if (!r->start && r->end) {
 			printk(KERN_ERR
 			       "PCI: Device %s not available because of resource collisions\n",
@@ -441,8 +471,6 @@
 		if (r->flags & IORESOURCE_MEM)
 			cmd |= PCI_COMMAND_MEMORY;
 	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
 	if (cmd != old_cmd) {
 		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 6d7b92d..70cfb6f 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -1495,7 +1495,7 @@
 		*offset += hose->pci_mem_offset;
 		res_bit = IORESOURCE_MEM;
 	} else {
-		io_offset = (unsigned long)hose->io_base_virt;
+		io_offset = hose->io_base_virt - ___IO_BASE;
 		*offset += io_offset;
 		res_bit = IORESOURCE_IO;
 	}
@@ -1522,7 +1522,7 @@
 
 		/* found it! construct the final physical address */
 		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - _IO_BASE;
+			*offset += hose->io_base_phys - io_offset;
 		return rp;
 	}
 
@@ -1739,6 +1739,23 @@
 	return result;
 }
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  u64 *start, u64 *end)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+	unsigned long offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+
+	*start = rsrc->start + offset;
+	*end = rsrc->end + offset;
+}
+
 void __init
 pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
 		  int flags, char *name)
diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c
index 3defc8c..ffe3006 100644
--- a/arch/ppc64/kernel/irq.c
+++ b/arch/ppc64/kernel/irq.c
@@ -245,7 +245,7 @@
 
 		spin_lock(&desc->lock);
 		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret);
+			note_interrupt(irq, desc, action_ret, regs);
 		if (likely(!(desc->status & IRQ_PENDING)))
 			break;
 		desc->status &= ~IRQ_PENDING;
diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c
index 580676f..ae6f579 100644
--- a/arch/ppc64/kernel/pci.c
+++ b/arch/ppc64/kernel/pci.c
@@ -351,7 +351,7 @@
 		*offset += hose->pci_mem_offset;
 		res_bit = IORESOURCE_MEM;
 	} else {
-		io_offset = (unsigned long)hose->io_base_virt;
+		io_offset = (unsigned long)hose->io_base_virt - pci_io_base;
 		*offset += io_offset;
 		res_bit = IORESOURCE_IO;
 	}
@@ -378,7 +378,7 @@
 
 		/* found it! construct the final physical address */
 		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - io_offset;
+		       	*offset += hose->io_base_phys - io_offset;
 		return rp;
 	}
 
@@ -944,4 +944,22 @@
 }
 EXPORT_SYMBOL(pci_read_irq_line);
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  u64 *start, u64 *end)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned long offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = pci_io_base - (unsigned long)hose->io_base_virt +
+			hose->io_base_phys;
+
+	*start = rsrc->start + offset;
+	*end = rsrc->end + offset;
+}
+
 #endif /* CONFIG_PPC_MULTIPLATFORM */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 262e13d..7a117ef 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -270,66 +270,10 @@
 
 source "drivers/Kconfig"
 
-config PRINTER
-	tristate "Parallel printer support"
-	depends on PARPORT
-	---help---
-	  If you intend to attach a printer to the parallel port of your Linux
-	  box (as opposed to using a serial printer; if the connector at the
-	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
-	  Also read the Printing-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  It is possible to share one parallel port among several devices
-	  (e.g. printer and ZIP drive) and it is safe to compile the
-	  corresponding drivers into the kernel.  If you want to compile this
-	  driver as a module however, choose M here and read
-	  <file:Documentation/parport.txt>.  The module will be called lp.
-
-	  If you have several parallel ports, you can specify which ports to
-	  use with the "lp" kernel command line option.  (Try "man bootparam"
-	  or see the documentation of your boot loader (silo) about how to pass
-	  options to the kernel at boot time.)  The syntax of the "lp" command
-	  line option can be found in <file:drivers/char/lp.c>.
-
-	  If you have more than 8 printers, you need to increase the LP_NO
-	  macro in lp.c and the PARPORT_MAX macro in parport.h.
-
-source "mm/Kconfig"
-
-endmenu
-
-source "drivers/base/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "drivers/mtd/Kconfig"
-
-source "drivers/serial/Kconfig"
-
 if !SUN4
 source "drivers/sbus/char/Kconfig"
 endif
 
-source "drivers/block/Kconfig"
-
-# Don't frighten a common SBus user
-if PCI
-
-source "drivers/ide/Kconfig"
-
-endif
-
-source "drivers/isdn/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/fc4/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "net/Kconfig"
-
 # This one must be before the filesystem configs. -DaveM
 
 menu "Unix98 PTY support"
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index b693c23..657e88a 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -7,25 +7,50 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
 #define MMCONFIG_APER_SIZE (256*1024*1024)
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-u32 pci_mmcfg_base_addr;
-
 /* Static virtual mapping of the MMCONFIG aperture */
-char *pci_mmcfg_virt;
+struct mmcfg_virt {
+	struct acpi_table_mcfg_config *cfg;
+	char *virt;
+};
+static struct mmcfg_virt *pci_mmcfg_virt;
 
-static inline char *pci_dev_base(unsigned int bus, unsigned int devfn)
+static char *get_virt(unsigned int seg, int bus)
 {
-	return pci_mmcfg_virt + ((bus << 20) | (devfn << 12));
+	int cfg_num = -1;
+	struct acpi_table_mcfg_config *cfg;
+
+	while (1) {
+		++cfg_num;
+		if (cfg_num >= pci_mmcfg_config_num) {
+			/* something bad is going on, no cfg table is found. */
+			/* so we fall back to the old way we used to do this */
+			/* and just rely on the first entry to be correct. */
+			return pci_mmcfg_virt[0].virt;
+		}
+		cfg = pci_mmcfg_virt[cfg_num].cfg;
+		if (cfg->pci_segment_group_number != seg)
+			continue;
+		if ((cfg->start_bus_number <= bus) &&
+		    (cfg->end_bus_number >= bus))
+			return pci_mmcfg_virt[cfg_num].virt;
+	}
+}
+
+static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
+{
+
+	return get_virt(seg, bus) + ((bus << 20) | (devfn << 12));
 }
 
 static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
-	char *addr = pci_dev_base(bus, devfn); 
+	char *addr = pci_dev_base(seg, bus, devfn);
 
 	if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
@@ -48,7 +73,7 @@
 static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 			   unsigned int devfn, int reg, int len, u32 value)
 {
-	char *addr = pci_dev_base(bus,devfn);
+	char *addr = pci_dev_base(seg, bus, devfn);
 
 	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
@@ -75,9 +100,15 @@
 
 static int __init pci_mmcfg_init(void)
 {
+	int i;
+
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return 0;
-	if (!pci_mmcfg_base_addr)
+
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].base_address == 0))
 		return 0;
 
 	/* Kludge for now. Don't use mmconfig on AMD systems because
@@ -88,13 +119,22 @@
 		return 0; 
 
 	/* RED-PEN i386 doesn't do _nocache right now */
-	pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_base_addr, MMCONFIG_APER_SIZE);
-	if (!pci_mmcfg_virt) { 
-		printk("PCI: Cannot map mmconfig aperture\n");
+	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
+	if (pci_mmcfg_virt == NULL) {
+		printk("PCI: Can not allocate memory for mmconfig structures\n");
 		return 0;
-	}	
+	}
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
+		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE);
+		if (!pci_mmcfg_virt[i].virt) {
+			printk("PCI: Cannot map mmconfig aperture for segment %d\n",
+			       pci_mmcfg_config[i].pci_segment_group_number);
+			return 0;
+		}
+		printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
+	}
 
-	printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_base_addr);
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
 
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 5a0adbf..97013dd 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -153,7 +153,7 @@
 		return_VALUE(-ENODEV);
 	}
 
-	result = acpi_bus_scan(*device);
+	result = acpi_bus_start(*device);
 
 	return_VALUE(result);
 }
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index 5d19b39..5148f3c 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -61,15 +61,14 @@
 
 
 /**
- * acpi_os_get_pci_id
+ * acpi_get_pci_id
  * ------------------
  * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem)
  * to resolve PCI information for ACPI-PCI devices defined in the namespace.
  * This typically occurs when resolving PCI operation region information.
  */
-#ifdef ACPI_FUTURE_USAGE
 acpi_status
-acpi_os_get_pci_id (
+acpi_get_pci_id (
 	acpi_handle		handle,
 	struct acpi_pci_id	*id)
 {
@@ -78,7 +77,7 @@
 	struct acpi_device	*device = NULL;
 	struct acpi_pci_data	*data = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_os_get_pci_id");
+	ACPI_FUNCTION_TRACE("acpi_get_pci_id");
 
 	if (!id)
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
@@ -92,7 +91,7 @@
 	}
 
 	status = acpi_get_data(handle, acpi_pci_data_handler, (void**) &data);
-	if (ACPI_FAILURE(status) || !data || !data->dev) {
+	if (ACPI_FAILURE(status) || !data) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, 
 			"Invalid ACPI-PCI context for device %s\n",
 			acpi_device_bid(device)));
@@ -115,7 +114,7 @@
 
 	return_ACPI_STATUS(AE_OK);
 }
-#endif  /*  ACPI_FUTURE_USAGE  */
+EXPORT_SYMBOL(acpi_get_pci_id);
 
 	
 int
@@ -129,6 +128,8 @@
 	char			*pathname = NULL;
 	struct acpi_buffer	buffer = {0, NULL};
 	acpi_handle		handle = NULL;
+	struct pci_dev		*dev;
+	struct pci_bus 		*bus;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_bind");
 
@@ -193,8 +194,20 @@
 	 * Locate matching device in PCI namespace.  If it doesn't exist
 	 * this typically means that the device isn't currently inserted
 	 * (e.g. docking station, port replicator, etc.).
+	 * We cannot simply search the global pci device list, since
+	 * PCI devices are added to the global pci list when the root
+	 * bridge start ops are run, which may not have happened yet.
 	 */
-	data->dev = pci_find_slot(data->id.bus, PCI_DEVFN(data->id.device, data->id.function));
+	bus = pci_find_bus(data->id.segment, data->id.bus);
+	if (bus) {
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			if (dev->devfn == PCI_DEVFN(data->id.device,
+						data->id.function)) {
+				data->dev = dev;
+				break;
+			}
+		}
+	}
 	if (!data->dev) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, 
 			"Device %02x:%02x:%02x.%02x not present in PCI namespace\n",
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 7e6b8e3..5d2f77f 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -46,6 +46,7 @@
 
 static int acpi_pci_root_add (struct acpi_device *device);
 static int acpi_pci_root_remove (struct acpi_device *device, int type);
+static int acpi_pci_root_start (struct acpi_device *device);
 
 static struct acpi_driver acpi_pci_root_driver = {
 	.name =		ACPI_PCI_ROOT_DRIVER_NAME,
@@ -54,6 +55,7 @@
 	.ops =		{
 				.add =    acpi_pci_root_add,
 				.remove = acpi_pci_root_remove,
+				.start =  acpi_pci_root_start,
 			},
 };
 
@@ -169,6 +171,7 @@
 	if (!root)
 		return_VALUE(-ENOMEM);
 	memset(root, 0, sizeof(struct acpi_pci_root));
+	INIT_LIST_HEAD(&root->node);
 
 	root->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
@@ -298,12 +301,31 @@
 			root->id.bus);
 
 end:
-	if (result)
+	if (result) {
+		if (!list_empty(&root->node))
+			list_del(&root->node);
 		kfree(root);
+	}
 
 	return_VALUE(result);
 }
 
+static int
+acpi_pci_root_start (
+	struct acpi_device	*device)
+{
+	struct acpi_pci_root	*root;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_root_start");
+
+	list_for_each_entry(root, &acpi_pci_roots, node) {
+		if (root->handle == device->handle) {
+			pci_bus_add_devices(root->bus);
+			return_VALUE(0);
+		}
+	}
+	return_VALUE(-ENODEV);
+}
 
 static int
 acpi_pci_root_remove (
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index f477874..76156ac 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -723,7 +723,7 @@
 		return_VALUE(-ENODEV);
 	}
 
-	acpi_bus_scan(*device);
+	acpi_bus_start(*device);
 
 	pr = acpi_driver_data(*device);
 	if (!pr)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index e858855..337d49b 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -553,20 +553,29 @@
 	 * upon possible configuration and currently allocated resources.
 	 */
 
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Driver successfully bound to device\n"));
+	return_VALUE(0);
+}
+
+int
+acpi_start_single_object (
+		struct acpi_device *device)
+{
+	int result = 0;
+	struct acpi_driver *driver;
+
+	ACPI_FUNCTION_TRACE("acpi_start_single_object");
+
+	if (!(driver = device->driver))
+		return_VALUE(0);
+
 	if (driver->ops.start) {
 		result = driver->ops.start(device);
 		if (result && driver->ops.remove)
 			driver->ops.remove(device, ACPI_BUS_REMOVAL_NORMAL);
-		return_VALUE(result);
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Driver successfully bound to device\n"));
-
-	if (driver->ops.scan) {
-		driver->ops.scan(device);
-	}
-
-	return_VALUE(0);
+	return_VALUE(result);
 }
 
 static int acpi_driver_attach(struct acpi_driver * drv)
@@ -586,6 +595,7 @@
 
 		if (!acpi_bus_match(dev, drv)) {
 			if (!acpi_bus_driver_init(dev, drv)) {
+				acpi_start_single_object(dev);
 				atomic_inc(&drv->references);
 				count++;
 				ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found driver [%s] for device [%s]\n",
@@ -1009,8 +1019,8 @@
 }
 
 
-int
-acpi_bus_add (
+static int
+acpi_add_single_object (
 	struct acpi_device	**child,
 	struct acpi_device	*parent,
 	acpi_handle		handle,
@@ -1019,7 +1029,7 @@
 	int			result = 0;
 	struct acpi_device	*device = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_bus_add");
+	ACPI_FUNCTION_TRACE("acpi_add_single_object");
 
 	if (!child)
 		return_VALUE(-EINVAL);
@@ -1140,7 +1150,7 @@
 	 *
 	 * TBD: Assumes LDM provides driver hot-plug capability.
 	 */
-	acpi_bus_find_driver(device);
+	result = acpi_bus_find_driver(device);
 
 end:
 	if (!result)
@@ -1153,10 +1163,10 @@
 
 	return_VALUE(result);
 }
-EXPORT_SYMBOL(acpi_bus_add);
 
 
-int acpi_bus_scan (struct acpi_device	*start)
+static int acpi_bus_scan (struct acpi_device	*start,
+		struct acpi_bus_ops *ops)
 {
 	acpi_status		status = AE_OK;
 	struct acpi_device	*parent = NULL;
@@ -1229,9 +1239,20 @@
 			continue;
 		}
 
-		status = acpi_bus_add(&child, parent, chandle, type);
-		if (ACPI_FAILURE(status))
-			continue;
+		if (ops->acpi_op_add)
+			status = acpi_add_single_object(&child, parent,
+					chandle, type);
+		 else
+			status = acpi_bus_get_device(chandle, &child);
+
+		 if (ACPI_FAILURE(status))
+			 continue;
+
+		if (ops->acpi_op_start) {
+			status = acpi_start_single_object(child);
+			if (ACPI_FAILURE(status))
+				continue;
+		}
 
 		/*
 		 * If the device is present, enabled, and functioning then
@@ -1257,8 +1278,50 @@
 
 	return_VALUE(0);
 }
-EXPORT_SYMBOL(acpi_bus_scan);
 
+int
+acpi_bus_add (
+	struct acpi_device	**child,
+	struct acpi_device	*parent,
+	acpi_handle		handle,
+	int			type)
+{
+	int result;
+	struct acpi_bus_ops ops;
+
+	ACPI_FUNCTION_TRACE("acpi_bus_add");
+
+	result = acpi_add_single_object(child, parent, handle, type);
+	if (!result) {
+		memset(&ops, 0, sizeof(ops));
+		ops.acpi_op_add = 1;
+		result = acpi_bus_scan(*child, &ops);
+	}
+	return_VALUE(result);
+}
+EXPORT_SYMBOL(acpi_bus_add);
+
+int
+acpi_bus_start (
+	struct acpi_device *device)
+{
+	int result;
+	struct acpi_bus_ops ops;
+
+	ACPI_FUNCTION_TRACE("acpi_bus_start");
+
+	if (!device)
+		return_VALUE(-EINVAL);
+
+	result = acpi_start_single_object(device);
+	if (!result) {
+		memset(&ops, 0, sizeof(ops));
+		ops.acpi_op_start = 1;
+		result = acpi_bus_scan(device, &ops);
+	}
+	return_VALUE(result);
+}
+EXPORT_SYMBOL(acpi_bus_start);
 
 static int
 acpi_bus_trim(struct acpi_device	*start,
@@ -1331,13 +1394,19 @@
 	/*
 	 * Enumerate all fixed-feature devices.
 	 */
-	if (acpi_fadt.pwr_button == 0)
-		result = acpi_bus_add(&device, acpi_root, 
+	if (acpi_fadt.pwr_button == 0) {
+		result = acpi_add_single_object(&device, acpi_root,
 			NULL, ACPI_BUS_TYPE_POWER_BUTTON);
+		if (!result)
+			result = acpi_start_single_object(device);
+	}
 
-	if (acpi_fadt.sleep_button == 0)
-		result = acpi_bus_add(&device, acpi_root, 
+	if (acpi_fadt.sleep_button == 0) {
+		result = acpi_add_single_object(&device, acpi_root,
 			NULL, ACPI_BUS_TYPE_SLEEP_BUTTON);
+		if (!result)
+			result = acpi_start_single_object(device);
+	}
 
 	return_VALUE(result);
 }
@@ -1346,6 +1415,7 @@
 static int __init acpi_scan_init(void)
 {
 	int result;
+	struct acpi_bus_ops ops;
 
 	ACPI_FUNCTION_TRACE("acpi_scan_init");
 
@@ -1357,17 +1427,23 @@
 	/*
 	 * Create the root device in the bus's device tree
 	 */
-	result = acpi_bus_add(&acpi_root, NULL, ACPI_ROOT_OBJECT, 
+	result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
 		ACPI_BUS_TYPE_SYSTEM);
 	if (result)
 		goto Done;
 
+	result = acpi_start_single_object(acpi_root);
+
 	/*
 	 * Enumerate devices in the ACPI namespace.
 	 */
 	result = acpi_bus_scan_fixed(acpi_root);
-	if (!result) 
-		result = acpi_bus_scan(acpi_root);
+	if (!result) {
+		memset(&ops, 0, sizeof(ops));
+		ops.acpi_op_add = 1;
+		ops.acpi_op_start = 1;
+		result = acpi_bus_scan(acpi_root, &ops);
+	}
 
 	if (result)
 		acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 97fe13f..6522814 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -74,6 +74,8 @@
 firmware_timeout_store(struct class *class, const char *buf, size_t count)
 {
 	loading_timeout = simple_strtol(buf, NULL, 10);
+	if (loading_timeout < 0)
+		loading_timeout = 0;
 	return count;
 }
 
@@ -138,6 +140,10 @@
 	switch (loading) {
 	case 1:
 		down(&fw_lock);
+		if (!fw_priv->fw) {
+			up(&fw_lock);
+			break;
+		}
 		vfree(fw_priv->fw->data);
 		fw_priv->fw->data = NULL;
 		fw_priv->fw->size = 0;
@@ -178,7 +184,7 @@
 
 	down(&fw_lock);
 	fw = fw_priv->fw;
-	if (test_bit(FW_STATUS_DONE, &fw_priv->status)) {
+	if (!fw || test_bit(FW_STATUS_DONE, &fw_priv->status)) {
 		ret_count = -ENODEV;
 		goto out;
 	}
@@ -238,9 +244,10 @@
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
+
 	down(&fw_lock);
 	fw = fw_priv->fw;
-	if (test_bit(FW_STATUS_DONE, &fw_priv->status)) {
+	if (!fw || test_bit(FW_STATUS_DONE, &fw_priv->status)) {
 		retval = -ENODEV;
 		goto out;
 	}
@@ -418,7 +425,7 @@
 
 	fw_priv = class_get_devdata(class_dev);
 
-	if (loading_timeout) {
+	if (loading_timeout > 0) {
 		fw_priv->timeout.expires = jiffies + loading_timeout * HZ;
 		add_timer(&fw_priv->timeout);
 	}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 653512b..3e9fb6e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -786,7 +786,6 @@
 
  	case CCISS_GETLUNINFO: {
  		LogvolInfo_struct luninfo;
- 		int i;
  		
  		luninfo.LunID = drv->LunID;
  		luninfo.num_opens = drv->usage_count;
diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c
index 234fdcf..1197462 100644
--- a/drivers/block/ll_rw_blk.c
+++ b/drivers/block/ll_rw_blk.c
@@ -1867,19 +1867,20 @@
 
 #define blkdev_free_rq(list) list_entry((list)->next, struct request, queuelist)
 /*
- * Get a free request, queue_lock must not be held
+ * Get a free request, queue_lock must be held.
+ * Returns NULL on failure, with queue_lock held.
+ * Returns !NULL on success, with queue_lock *not held*.
  */
 static struct request *get_request(request_queue_t *q, int rw, struct bio *bio,
 				   int gfp_mask)
 {
 	struct request *rq = NULL;
 	struct request_list *rl = &q->rq;
-	struct io_context *ioc = get_io_context(gfp_mask);
+	struct io_context *ioc = current_io_context(GFP_ATOMIC);
 
 	if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)))
 		goto out;
 
-	spin_lock_irq(q->queue_lock);
 	if (rl->count[rw]+1 >= q->nr_requests) {
 		/*
 		 * The queue will fill after this allocation, so set it as
@@ -1907,11 +1908,19 @@
 		 * The queue is full and the allocating process is not a
 		 * "batcher", and not exempted by the IO scheduler
 		 */
-		spin_unlock_irq(q->queue_lock);
 		goto out;
 	}
 
 get_rq:
+	/*
+	 * Only allow batching queuers to allocate up to 50% over the defined
+	 * limit of requests, otherwise we could have thousands of requests
+	 * allocated with any setting of ->nr_requests
+	 */
+	if (rl->count[rw] >= (3 * q->nr_requests / 2)) {
+		spin_unlock_irq(q->queue_lock);
+		goto out;
+	}
 	rl->count[rw]++;
 	rl->starved[rw] = 0;
 	if (rl->count[rw] >= queue_congestion_on_threshold(q))
@@ -1941,7 +1950,6 @@
 		if (unlikely(rl->count[rw] == 0))
 			rl->starved[rw] = 1;
 
-		spin_unlock_irq(q->queue_lock);
 		goto out;
 	}
 
@@ -1951,21 +1959,23 @@
 	rq_init(q, rq);
 	rq->rl = rl;
 out:
-	put_io_context(ioc);
 	return rq;
 }
 
 /*
  * No available requests for this queue, unplug the device and wait for some
  * requests to become available.
+ *
+ * Called with q->queue_lock held, and returns with it unlocked.
  */
 static struct request *get_request_wait(request_queue_t *q, int rw,
 					struct bio *bio)
 {
-	DEFINE_WAIT(wait);
 	struct request *rq;
 
-	do {
+	rq = get_request(q, rw, bio, GFP_NOIO);
+	while (!rq) {
+		DEFINE_WAIT(wait);
 		struct request_list *rl = &q->rq;
 
 		prepare_to_wait_exclusive(&rl->wait[rw], &wait,
@@ -1976,7 +1986,8 @@
 		if (!rq) {
 			struct io_context *ioc;
 
-			generic_unplug_device(q);
+			__generic_unplug_device(q);
+			spin_unlock_irq(q->queue_lock);
 			io_schedule();
 
 			/*
@@ -1985,12 +1996,13 @@
 			 * up to a big batch of them for a small period time.
 			 * See ioc_batching, ioc_set_batching
 			 */
-			ioc = get_io_context(GFP_NOIO);
+			ioc = current_io_context(GFP_NOIO);
 			ioc_set_batching(q, ioc);
-			put_io_context(ioc);
+
+			spin_lock_irq(q->queue_lock);
 		}
 		finish_wait(&rl->wait[rw], &wait);
-	} while (!rq);
+	}
 
 	return rq;
 }
@@ -2001,14 +2013,18 @@
 
 	BUG_ON(rw != READ && rw != WRITE);
 
-	if (gfp_mask & __GFP_WAIT)
+	spin_lock_irq(q->queue_lock);
+	if (gfp_mask & __GFP_WAIT) {
 		rq = get_request_wait(q, rw, NULL);
-	else
+	} else {
 		rq = get_request(q, rw, NULL, gfp_mask);
+		if (!rq)
+			spin_unlock_irq(q->queue_lock);
+	}
+	/* q->queue_lock is unlocked at this point */
 
 	return rq;
 }
-
 EXPORT_SYMBOL(blk_get_request);
 
 /**
@@ -2512,7 +2528,7 @@
 
 static int __make_request(request_queue_t *q, struct bio *bio)
 {
-	struct request *req, *freereq = NULL;
+	struct request *req;
 	int el_ret, rw, nr_sectors, cur_nr_sectors, barrier, err, sync;
 	unsigned short prio;
 	sector_t sector;
@@ -2540,14 +2556,9 @@
 		goto end_io;
 	}
 
-again:
 	spin_lock_irq(q->queue_lock);
 
-	if (elv_queue_empty(q)) {
-		blk_plug_device(q);
-		goto get_rq;
-	}
-	if (barrier)
+	if (unlikely(barrier) || elv_queue_empty(q))
 		goto get_rq;
 
 	el_ret = elv_merge(q, &req, bio);
@@ -2592,40 +2603,24 @@
 				elv_merged_request(q, req);
 			goto out;
 
-		/*
-		 * elevator says don't/can't merge. get new request
-		 */
-		case ELEVATOR_NO_MERGE:
-			break;
-
+		/* ELV_NO_MERGE: elevator says don't/can't merge. */
 		default:
-			printk("elevator returned crap (%d)\n", el_ret);
-			BUG();
+			;
 	}
 
+get_rq:
+	/*
+	 * Grab a free request. This is might sleep but can not fail.
+	 * Returns with the queue unlocked.
+	 */
+	req = get_request_wait(q, rw, bio);
+
 	/*
-	 * Grab a free request from the freelist - if that is empty, check
-	 * if we are doing read ahead and abort instead of blocking for
-	 * a free slot.
+	 * After dropping the lock and possibly sleeping here, our request
+	 * may now be mergeable after it had proven unmergeable (above).
+	 * We don't worry about that case for efficiency. It won't happen
+	 * often, and the elevators are able to handle it.
 	 */
-get_rq:
-	if (freereq) {
-		req = freereq;
-		freereq = NULL;
-	} else {
-		spin_unlock_irq(q->queue_lock);
-		if ((freereq = get_request(q, rw, bio, GFP_ATOMIC)) == NULL) {
-			/*
-			 * READA bit set
-			 */
-			err = -EWOULDBLOCK;
-			if (bio_rw_ahead(bio))
-				goto end_io;
-	
-			freereq = get_request_wait(q, rw, bio);
-		}
-		goto again;
-	}
 
 	req->flags |= REQ_CMD;
 
@@ -2654,10 +2649,11 @@
 	req->rq_disk = bio->bi_bdev->bd_disk;
 	req->start_time = jiffies;
 
+	spin_lock_irq(q->queue_lock);
+	if (elv_queue_empty(q))
+		blk_plug_device(q);
 	add_request(q, req);
 out:
-	if (freereq)
-		__blk_put_request(q, freereq);
 	if (sync)
 		__generic_unplug_device(q);
 
@@ -3284,24 +3280,20 @@
 
 /*
  * If the current task has no IO context then create one and initialise it.
- * If it does have a context, take a ref on it.
+ * Otherwise, return its existing IO context.
  *
- * This is always called in the context of the task which submitted the I/O.
- * But weird things happen, so we disable local interrupts to ensure exclusive
- * access to *current.
+ * This returned IO context doesn't have a specifically elevated refcount,
+ * but since the current task itself holds a reference, the context can be
+ * used in general code, so long as it stays within `current` context.
  */
-struct io_context *get_io_context(int gfp_flags)
+struct io_context *current_io_context(int gfp_flags)
 {
 	struct task_struct *tsk = current;
-	unsigned long flags;
 	struct io_context *ret;
 
-	local_irq_save(flags);
 	ret = tsk->io_context;
-	if (ret)
-		goto out;
-
-	local_irq_restore(flags);
+	if (likely(ret))
+		return ret;
 
 	ret = kmem_cache_alloc(iocontext_cachep, gfp_flags);
 	if (ret) {
@@ -3312,27 +3304,27 @@
 		ret->nr_batch_requests = 0; /* because this is 0 */
 		ret->aic = NULL;
 		ret->cic = NULL;
-
-		local_irq_save(flags);
-
-		/*
-		 * very unlikely, someone raced with us in setting up the task
-		 * io context. free new context and just grab a reference.
-		 */
-		if (!tsk->io_context)
-			tsk->io_context = ret;
-		else {
-			kmem_cache_free(iocontext_cachep, ret);
-			ret = tsk->io_context;
-		}
-
-out:
-		atomic_inc(&ret->refcount);
-		local_irq_restore(flags);
+		tsk->io_context = ret;
 	}
 
 	return ret;
 }
+EXPORT_SYMBOL(current_io_context);
+
+/*
+ * If the current task has no IO context then create one and initialise it.
+ * If it does have a context, take a ref on it.
+ *
+ * This is always called in the context of the task which submitted the I/O.
+ */
+struct io_context *get_io_context(int gfp_flags)
+{
+	struct io_context *ret;
+	ret = current_io_context(gfp_flags);
+	if (likely(ret))
+		atomic_inc(&ret->refcount);
+	return ret;
+}
 EXPORT_SYMBOL(get_io_context);
 
 void copy_io_context(struct io_context **pdst, struct io_context **psrc)
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 1407945..59f589d 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -686,6 +686,15 @@
 	.subvendor	= PCI_ANY_ID,
 	.subdevice	= PCI_ANY_ID,
 	},
+	/* SIS 760 */
+	{
+	.class		= (PCI_CLASS_BRIDGE_HOST << 8),
+	.class_mask	= ~0,
+	.vendor		= PCI_VENDOR_ID_SI,
+	.device		= PCI_DEVICE_ID_SI_760,
+	.subvendor	= PCI_ANY_ID,
+	.subdevice	= PCI_ANY_ID,
+	},
 	{ }
 };
 
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 1813d0d..e16c13f 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -1088,8 +1088,8 @@
 		long                  seqid;
 		int                   broadcast = 0;
 
-		if (addr->channel > IPMI_NUM_CHANNELS) {
-			spin_lock_irqsave(&intf->counter_lock, flags);
+		if (addr->channel >= IPMI_MAX_CHANNELS) {
+		        spin_lock_irqsave(&intf->counter_lock, flags);
 			intf->sent_invalid_commands++;
 			spin_unlock_irqrestore(&intf->counter_lock, flags);
 			rv = -EINVAL;
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 7c24fbe..95f7046 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -451,7 +451,7 @@
 		int n = (sizeof(moxa_pcibrds) / sizeof(moxa_pcibrds[0])) - 1;
 		i = 0;
 		while (i < n) {
-			while ((p = pci_find_device(moxa_pcibrds[i].vendor, moxa_pcibrds[i].device, p))!=NULL)
+			while ((p = pci_get_device(moxa_pcibrds[i].vendor, moxa_pcibrds[i].device, p))!=NULL)
 			{
 				if (pci_enable_device(p))
 					continue;
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 7db3370..d7d4840 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -1095,7 +1095,7 @@
 
 #ifdef CONFIG_PCI
     /* First look for the JET devices: */
-    while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
+    while ((pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
                                     PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, 
                                     pdev))) {
        if (pci_enable_device(pdev)) continue;
@@ -1169,7 +1169,7 @@
   */
 
     /* Then look for the older RIO/PCI devices: */
-    while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
+    while ((pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
                                     PCI_DEVICE_ID_SPECIALIX_RIO, 
                                     pdev))) {
        if (pci_enable_device(pdev)) continue;
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index ff4f098..d8f9e94 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -78,6 +78,7 @@
 #include <linux/sysctl.h>
 #include <linux/wait.h>
 #include <linux/bcd.h>
+#include <linux/delay.h>
 
 #include <asm/current.h>
 #include <asm/uaccess.h>
@@ -894,7 +895,6 @@
 	struct proc_dir_entry *ent;
 #if defined(__alpha__) || defined(__mips__)
 	unsigned int year, ctrl;
-	unsigned long uip_watchdog;
 	char *guess = NULL;
 #endif
 #ifdef __sparc__
@@ -1000,12 +1000,8 @@
 	/* Each operating system on an Alpha uses its own epoch.
 	   Let's try to guess which one we are using now. */
 	
-	uip_watchdog = jiffies;
 	if (rtc_is_updating() != 0)
-		while (jiffies - uip_watchdog < 2*HZ/100) { 
-			barrier();
-			cpu_relax();
-		}
+		msleep(20);
 	
 	spin_lock_irq(&rtc_lock);
 	year = CMOS_READ(RTC_YEAR);
@@ -1213,7 +1209,6 @@
 
 void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 {
-	unsigned long uip_watchdog = jiffies;
 	unsigned char ctrl;
 #ifdef CONFIG_MACH_DECSTATION
 	unsigned int real_year;
@@ -1221,7 +1216,7 @@
 
 	/*
 	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
+	 * can take just over 2ms. We wait 20ms. There is no need to
 	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 	 * If you need to know *exactly* when a second has started, enable
 	 * periodic update complete interrupts, (via ioctl) and then 
@@ -1230,10 +1225,7 @@
 	 */
 
 	if (rtc_is_updating() != 0)
-		while (jiffies - uip_watchdog < 2*HZ/100) {
-			barrier();
-			cpu_relax();
-		}
+		msleep(20);
 
 	/*
 	 * Only the values that we read from the RTC are set. We leave
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
index 659335d..ec78d2f 100644
--- a/drivers/char/tipar.c
+++ b/drivers/char/tipar.c
@@ -396,7 +396,7 @@
 static int __init
 tipar_setup(char *str)
 {
-	int ints[2];
+	int ints[3];
 
 	str = get_options(str, ARRAY_SIZE(ints), ints);
 
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 5859799..f19cf9d 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -476,11 +476,11 @@
 			ld = tty_ldisc_ref(tty);
 			switch (arg) {
 			case TCIFLUSH:
-				if (ld->flush_buffer)
+				if (ld && ld->flush_buffer)
 					ld->flush_buffer(tty);
 				break;
 			case TCIOFLUSH:
-				if (ld->flush_buffer)
+				if (ld && ld->flush_buffer)
 					ld->flush_buffer(tty);
 				/* fall through */
 			case TCOFLUSH:
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 8971484..1d44f69 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -25,6 +25,7 @@
 #include <linux/fs.h>
 #include <linux/console.h>
 #include <linux/signal.h>
+#include <linux/timex.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -386,7 +387,7 @@
 		if (!perm)
 			return -EPERM;
 		if (arg)
-			arg = 1193182 / arg;
+			arg = CLOCK_TICK_RATE / arg;
 		kd_mksound(arg, 0);
 		return 0;
 
@@ -403,7 +404,7 @@
 		ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
 		count = ticks ? (arg & 0xffff) : 0;
 		if (count)
-			count = 1193182 / count;
+			count = CLOCK_TICK_RATE / count;
 		kd_mksound(count, ticks);
 		return 0;
 	}
diff --git a/drivers/char/watchdog/ixp2000_wdt.c b/drivers/char/watchdog/ixp2000_wdt.c
index 4e98c21..4b03951 100644
--- a/drivers/char/watchdog/ixp2000_wdt.c
+++ b/drivers/char/watchdog/ixp2000_wdt.c
@@ -162,7 +162,7 @@
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
 		wdt_disable();
 	} else {
-		printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly - "
+		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
 	}
 
diff --git a/drivers/char/watchdog/ixp4xx_wdt.c b/drivers/char/watchdog/ixp4xx_wdt.c
index 82396e0..83df369 100644
--- a/drivers/char/watchdog/ixp4xx_wdt.c
+++ b/drivers/char/watchdog/ixp4xx_wdt.c
@@ -156,7 +156,7 @@
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
 		wdt_disable();
 	} else {
-		printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly - "
+		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
 	}
 
diff --git a/drivers/isdn/hardware/eicon/dadapter.c b/drivers/isdn/hardware/eicon/dadapter.c
index 6e548a2..8949789 100644
--- a/drivers/isdn/hardware/eicon/dadapter.c
+++ b/drivers/isdn/hardware/eicon/dadapter.c
@@ -44,7 +44,7 @@
   Array to held adapter information
    -------------------------------------------------------------------------- */
 static DESCRIPTOR  HandleTable[NEW_MAX_DESCRIPTORS];
-dword Adapters = 0; /* Number of adapters */
+static dword Adapters = 0; /* Number of adapters */
 /* --------------------------------------------------------------------------
   Shadow IDI_DIMAINT
   and 'shadow' debug stuff
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 6e7e060..7333377a 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -312,7 +312,7 @@
 /* function to read critical counter registers that   */
 /* may be udpated by the chip during read             */
 /******************************************************/
-static volatile u_char
+static u_char
 Read_hfc8_stable(hfc4s8s_hw * hw, int reg)
 {
 	u_char ref8;
@@ -324,7 +324,7 @@
 	return in8;
 }
 
-static volatile int
+static int
 Read_hfc16_stable(hfc4s8s_hw * hw, int reg)
 {
 	int ref16;
@@ -1465,7 +1465,7 @@
 /******************************************/
 /* disable memory mapped ports / io ports */
 /******************************************/
-void
+static void
 release_pci_ports(hfc4s8s_hw * hw)
 {
 	pci_write_config_word(hw->pdev, PCI_COMMAND, 0);
@@ -1481,7 +1481,7 @@
 /*****************************************/
 /* enable memory mapped ports / io ports */
 /*****************************************/
-void
+static void
 enable_pci_ports(hfc4s8s_hw * hw)
 {
 #ifdef CONFIG_HISAX_HFC4S8S_PCIMEM
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index 8ee25b2..1fd3d4e 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -42,6 +42,8 @@
 
 static hycapi_appl hycapi_applications[CAPI_MAXAPPL];
 
+static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
+
 static inline int _hycapi_appCheck(int app_id, int ctrl_no)
 {
 	if((ctrl_no <= 0) || (ctrl_no > CAPI_MAXCONTR) || (app_id <= 0) ||
@@ -57,7 +59,7 @@
 Kernel-Capi callback reset_ctr
 ******************************/     
 
-void 
+static void
 hycapi_reset_ctr(struct capi_ctr *ctrl)
 {
 	hycapictrl_info *cinfo = ctrl->driverdata;
@@ -73,7 +75,7 @@
 Kernel-Capi callback remove_ctr
 ******************************/     
 
-void 
+static void
 hycapi_remove_ctr(struct capi_ctr *ctrl)
 {
 	int i;
@@ -215,7 +217,7 @@
 The application is recorded in the internal list.
 *************************************************************/
 
-void 
+static void
 hycapi_register_appl(struct capi_ctr *ctrl, __u16 appl, 
 		     capi_register_params *rp)
 {
@@ -291,7 +293,7 @@
 registration at controller-level
 ******************************************************************/
 
-void 
+static void
 hycapi_release_appl(struct capi_ctr *ctrl, __u16 appl)
 {
 	int chk;
@@ -364,7 +366,7 @@
 
 ***************************************************************/
 
-u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
+static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
 {
 	__u16 appl_id;
 	int _len, _len2;
@@ -437,8 +439,8 @@
 
 *********************************************************************/
 
-int hycapi_read_proc(char *page, char **start, off_t off,
-		     int count, int *eof, struct capi_ctr *ctrl)
+static int hycapi_read_proc(char *page, char **start, off_t off,
+			    int count, int *eof, struct capi_ctr *ctrl)
 {
 	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
 	hysdn_card *card = cinfo->card;
@@ -485,7 +487,7 @@
 
 **************************************************************/
 
-int hycapi_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
+static int hycapi_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
 {
 #ifdef HYCAPI_PRINTFNAMES
 	printk(KERN_NOTICE "hycapi_load_firmware\n");    
@@ -494,7 +496,7 @@
 }
 
 
-char *hycapi_procinfo(struct capi_ctr *ctrl)
+static char *hycapi_procinfo(struct capi_ctr *ctrl)
 {
 	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
 #ifdef HYCAPI_PRINTFNAMES
diff --git a/drivers/isdn/hysdn/hysdn_boot.c b/drivers/isdn/hysdn/hysdn_boot.c
index 6c04281..7bfba19 100644
--- a/drivers/isdn/hysdn/hysdn_boot.c
+++ b/drivers/isdn/hysdn/hysdn_boot.c
@@ -53,7 +53,7 @@
 /*  to be called at start of POF file reading,       */
 /*  before starting any decryption on any POF record. */
 /*****************************************************/
-void
+static void
 StartDecryption(struct boot_data *boot)
 {
 	boot->Cryptor = CRYPT_STARTTERM;
@@ -66,7 +66,7 @@
 /*       to HI and LO boot loader and (all) seq tags, because  */
 /*       global Cryptor is started for whole POF.              */
 /***************************************************************/
-void
+static void
 DecryptBuf(struct boot_data *boot, int cnt)
 {
 	uchar *bufp = boot->buf.BootBuf;
diff --git a/drivers/isdn/hysdn/hysdn_defs.h b/drivers/isdn/hysdn/hysdn_defs.h
index 4cee26e..432f6f9 100644
--- a/drivers/isdn/hysdn/hysdn_defs.h
+++ b/drivers/isdn/hysdn/hysdn_defs.h
@@ -227,7 +227,6 @@
 /*****************/
 /* exported vars */
 /*****************/
-extern int cardmax;		/* number of found cards */
 extern hysdn_card *card_root;	/* pointer to first card */
 
 
@@ -244,7 +243,6 @@
 /* hysdn_proclog.c */
 extern int hysdn_proclog_init(hysdn_card *);	/* init proc log entry */
 extern void hysdn_proclog_release(hysdn_card *);	/* deinit proc log entry */
-extern void put_log_buffer(hysdn_card *, char *);	/* output log data */
 extern void hysdn_addlog(hysdn_card *, char *,...);	/* output data to log */
 extern void hysdn_card_errlog(hysdn_card *, tErrLogEntry *, int);	/* output card log */
 
@@ -278,16 +276,6 @@
 extern int hycapi_capi_create(hysdn_card *);	/* create a new capi device */
 extern int hycapi_capi_release(hysdn_card *);	/* delete the device */
 extern int hycapi_capi_stop(hysdn_card *card);   /* suspend */
-extern int hycapi_load_firmware(struct capi_ctr *, capiloaddata *);
-extern void hycapi_reset_ctr(struct capi_ctr *);
-extern void hycapi_remove_ctr(struct capi_ctr *);
-extern void hycapi_register_appl(struct capi_ctr *, __u16 appl,
-				 capi_register_params *);
-extern void hycapi_release_appl(struct capi_ctr *, __u16 appl);
-extern u16  hycapi_send_message(struct capi_ctr *, struct sk_buff *skb);
-extern char *hycapi_procinfo(struct capi_ctr *);
-extern int hycapi_read_proc(char *page, char **start, off_t off,
-			    int count, int *eof, struct capi_ctr *card);
 extern void hycapi_rx_capipkt(hysdn_card * card, uchar * buf, word len);
 extern void hycapi_tx_capiack(hysdn_card * card);
 extern struct sk_buff *hycapi_tx_capiget(hysdn_card *card);
diff --git a/drivers/isdn/hysdn/hysdn_init.c b/drivers/isdn/hysdn/hysdn_init.c
index 5cac2bf..12c8137 100644
--- a/drivers/isdn/hysdn/hysdn_init.c
+++ b/drivers/isdn/hysdn/hysdn_init.c
@@ -34,7 +34,7 @@
 MODULE_LICENSE("GPL");
 
 static char *hysdn_init_revision = "$Revision: 1.6.6.6 $";
-int cardmax;			/* number of found cards */
+static int cardmax;		/* number of found cards */
 hysdn_card *card_root = NULL;	/* pointer to first card */
 
 /**********************************************/
diff --git a/drivers/isdn/hysdn/hysdn_proclog.c b/drivers/isdn/hysdn/hysdn_proclog.c
index 8ef2b7c..4d57011 100644
--- a/drivers/isdn/hysdn/hysdn_proclog.c
+++ b/drivers/isdn/hysdn/hysdn_proclog.c
@@ -22,6 +22,8 @@
 /* the proc subdir for the interface is defined in the procconf module */
 extern struct proc_dir_entry *hysdn_proc_entry;
 
+static void put_log_buffer(hysdn_card * card, char *cp);
+
 /*************************************************/
 /* structure keeping ascii log for device output */
 /*************************************************/
@@ -93,7 +95,7 @@
 /* opened for read got the contents.        */
 /* Flushes buffers not longer in use.       */
 /********************************************/
-void
+static void
 put_log_buffer(hysdn_card * card, char *cp)
 {
 	struct log_data *ib;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 3802f7a..4a0c57d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -338,6 +338,7 @@
 
 	if (atomic_dec_and_test(&rdev->mddev->pending_writes))
 		wake_up(&rdev->mddev->sb_wait);
+	bio_put(bio);
 	return 0;
 }
 
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2dc906f..810e7aa 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -7,8 +7,7 @@
 zoran-objs      :=	zr36120.o zr36120_i2c.o zr36120_mem.o
 zr36067-objs	:=	zoran_procfs.o zoran_device.o \
 			zoran_driver.o zoran_card.o
-tuner-objs	:=	tuner-core.o tuner-simple.o mt20xx.o tda8290.o
-
+tuner-objs	:=	tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o
 
 obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index 290289a..7d62b39 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-driver.c,v 1.38 2005/06/10 17:20:24 mchehab Exp $
+    $Id: bttv-driver.c,v 1.40 2005/06/16 21:38:45 nsh Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -76,6 +76,9 @@
 static unsigned int whitecrush_lower = 0x7F;
 static unsigned int vcr_hack    = 0;
 static unsigned int irq_iswitch = 0;
+static unsigned int uv_ratio    = 50;
+static unsigned int full_luma_range = 0;
+static unsigned int coring      = 0;
 
 /* API features (turn on/off stuff for testing) */
 static unsigned int v4l2        = 1;
@@ -106,6 +109,9 @@
 module_param(whitecrush_upper,  int, 0444);
 module_param(whitecrush_lower,  int, 0444);
 module_param(vcr_hack,          int, 0444);
+module_param(uv_ratio,          int, 0444);
+module_param(full_luma_range,   int, 0444);
+module_param(coring,            int, 0444);
 
 module_param_array(radio, int, NULL, 0444);
 
@@ -124,6 +130,9 @@
 MODULE_PARM_DESC(whitecrush_lower,"sets the white crush lower value, default is 127");
 MODULE_PARM_DESC(vcr_hack,"enables the VCR hack (improves synch on poor VCR tapes), default is 0 (no)");
 MODULE_PARM_DESC(irq_iswitch,"switch inputs in irq handler");
+MODULE_PARM_DESC(uv_ratio,"ratio between u and v gains, default is 50");
+MODULE_PARM_DESC(full_luma_range,"use the full luma range, default is 0 (no)");
+MODULE_PARM_DESC(coring,"set the luma coring level, default is 0 (no)");
 
 MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards");
 MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr");
@@ -484,7 +493,10 @@
 #define V4L2_CID_PRIVATE_VCR_HACK    (V4L2_CID_PRIVATE_BASE + 5)
 #define V4L2_CID_PRIVATE_WHITECRUSH_UPPER   (V4L2_CID_PRIVATE_BASE + 6)
 #define V4L2_CID_PRIVATE_WHITECRUSH_LOWER   (V4L2_CID_PRIVATE_BASE + 7)
-#define V4L2_CID_PRIVATE_LASTP1      (V4L2_CID_PRIVATE_BASE + 8)
+#define V4L2_CID_PRIVATE_UV_RATIO    (V4L2_CID_PRIVATE_BASE + 8)
+#define V4L2_CID_PRIVATE_FULL_LUMA_RANGE    (V4L2_CID_PRIVATE_BASE + 9)
+#define V4L2_CID_PRIVATE_CORING      (V4L2_CID_PRIVATE_BASE + 10)
+#define V4L2_CID_PRIVATE_LASTP1      (V4L2_CID_PRIVATE_BASE + 11)
 
 static const struct v4l2_queryctrl no_ctl = {
 	.name  = "42",
@@ -618,8 +630,32 @@
 		.step          = 1,
 		.default_value = 0x7F,
 		.type          = V4L2_CTRL_TYPE_INTEGER,
+	},{
+		.id            = V4L2_CID_PRIVATE_UV_RATIO,
+		.name          = "uv ratio",
+		.minimum       = 0,
+		.maximum       = 100,
+		.step          = 1,
+		.default_value = 50,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+	},{
+		.id            = V4L2_CID_PRIVATE_FULL_LUMA_RANGE,
+		.name          = "full luma range",
+		.minimum       = 0,
+		.maximum       = 1,
+		.type          = V4L2_CTRL_TYPE_BOOLEAN,
+	},{
+		.id            = V4L2_CID_PRIVATE_CORING,
+		.name          = "coring",
+		.minimum       = 0,
+		.maximum       = 3,
+		.step          = 1,
+		.default_value = 0,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
 	}
 
+
+
 };
 static const int BTTV_CTLS = ARRAY_SIZE(bttv_ctls);
 
@@ -833,8 +869,8 @@
 	btv->saturation = color;
 
 	/* 0-511 for the color */
-	val_u   = color >> 7;
-	val_v   = ((color>>7)*180L)/254;
+	val_u   = ((color * btv->opt_uv_ratio) / 50) >> 7;
+	val_v   = (((color * (100 - btv->opt_uv_ratio) / 50) >>7)*180L)/254;
         hibits  = (val_u >> 7) & 2;
 	hibits |= (val_v >> 8) & 1;
         btwrite(val_u & 0xff, BT848_SAT_U_LO);
@@ -1151,6 +1187,15 @@
 	case V4L2_CID_PRIVATE_WHITECRUSH_LOWER:
 		c->value = btv->opt_whitecrush_lower;
 		break;
+	case V4L2_CID_PRIVATE_UV_RATIO:
+		c->value = btv->opt_uv_ratio;
+		break;
+	case V4L2_CID_PRIVATE_FULL_LUMA_RANGE:
+		c->value = btv->opt_full_luma_range;
+		break;
+	case V4L2_CID_PRIVATE_CORING:
+		c->value = btv->opt_coring;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1247,6 +1292,18 @@
 		btv->opt_whitecrush_lower = c->value;
 		btwrite(c->value, BT848_WC_DOWN);
 		break;
+	case V4L2_CID_PRIVATE_UV_RATIO:
+		btv->opt_uv_ratio = c->value;
+		bt848_sat(btv, btv->saturation);
+		break;
+	case V4L2_CID_PRIVATE_FULL_LUMA_RANGE:
+		btv->opt_full_luma_range = c->value;
+		btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM);
+		break;
+	case V4L2_CID_PRIVATE_CORING:
+		btv->opt_coring = c->value;
+		btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM);
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -3117,11 +3174,6 @@
                         return -EINVAL;
 		memset(v,0,sizeof(*v));
                 strcpy(v->name, "Radio");
-                /* japan:          76.0 MHz -  89.9 MHz
-                   western europe: 87.5 MHz - 108.0 MHz
-                   russia:         65.0 MHz - 108.0 MHz */
-                v->rangelow=(int)(65*16);
-                v->rangehigh=(int)(108*16);
                 bttv_call_i2c_clients(btv,cmd,v);
                 return 0;
         }
@@ -3876,6 +3928,9 @@
 	btv->opt_vcr_hack   = vcr_hack;
 	btv->opt_whitecrush_upper  = whitecrush_upper;
 	btv->opt_whitecrush_lower  = whitecrush_lower;
+	btv->opt_uv_ratio   = uv_ratio;
+	btv->opt_full_luma_range   = full_luma_range;
+	btv->opt_coring     = coring;
 
 	/* fill struct bttv with some useful defaults */
 	btv->init.btv         = btv;
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index 7b6f1e8..f3293e4 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -1,5 +1,5 @@
 /*
-    $Id: bttvp.h,v 1.17 2005/02/16 12:14:10 kraxel Exp $
+    $Id: bttvp.h,v 1.19 2005/06/16 21:38:45 nsh Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -326,6 +326,9 @@
 	int opt_vcr_hack;
 	int opt_whitecrush_upper;
 	int opt_whitecrush_lower;
+	int opt_uv_ratio;
+	int opt_full_luma_range;
+	int opt_coring;
 
 	/* radio data/state */
 	int has_radio;
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 95ad17b..9c005cb 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -1,5 +1,5 @@
 /*
- * $Id: mt20xx.c,v 1.4 2005/03/04 09:24:56 kraxel Exp $
+ * $Id: mt20xx.c,v 1.5 2005/06/16 08:29:49 nsh Exp $
  *
  * i2c tv tuner chip device driver
  * controls microtune tuners, mt2032 + mt2050 at the moment.
@@ -295,8 +295,8 @@
 	int if2 = t->radio_if2;
 
 	// per Manual for FM tuning: first if center freq. 1085 MHz
-        mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */,
-			   1085*1000*1000,if2,if2,if2);
+        mt2032_set_if_freq(c, freq * 1000 / 16,
+			      1085*1000*1000,if2,if2,if2);
 }
 
 // Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index b27cc34..f59d460 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tda8290.c,v 1.7 2005/03/07 12:01:51 kraxel Exp $
+ * $Id: tda8290.c,v 1.11 2005/06/18 06:09:06 nsh Exp $
  *
  * i2c tv tuner chip device driver
  * controls the philips tda8290+75 tuner chip combo.
@@ -69,7 +69,7 @@
 static unsigned char i2c_enable_bridge[2] = 	{ 0x21, 0xC0 };
 static unsigned char i2c_disable_bridge[2] = 	{ 0x21, 0x80 };
 static unsigned char i2c_init_tda8275[14] = 	{ 0x00, 0x00, 0x00, 0x00,
-						  0x7C, 0x04, 0xA3, 0x3F,
+						  0xfC, 0x04, 0xA3, 0x3F,
 						  0x2A, 0x04, 0xFF, 0x00,
 						  0x00, 0x40 };
 static unsigned char i2c_set_VS[2] = 		{ 0x30, 0x6F };
@@ -138,16 +138,24 @@
 
 static void set_frequency(struct tuner *t, u16 ifc)
 {
-	u32 N = (((t->freq<<3)+ifc)&0x3fffc);
+	u32 freq;
+	u32 N;
 
-	N = N >> get_freq_entry(div_table, t->freq);
+	if (t->mode == V4L2_TUNER_RADIO)
+		freq = t->freq / 1000;
+	else
+		freq = t->freq;
+
+	N = (((freq<<3)+ifc)&0x3fffc);
+
+	N = N >> get_freq_entry(div_table, freq);
 	t->i2c_set_freq[0] = 0;
 	t->i2c_set_freq[1] = (unsigned char)(N>>8);
 	t->i2c_set_freq[2] = (unsigned char) N;
 	t->i2c_set_freq[3] = 0x40;
 	t->i2c_set_freq[4] = 0x52;
-	t->i2c_set_freq[5] = get_freq_entry(band_table, t->freq);
-	t->i2c_set_freq[6] = get_freq_entry(agc_table,  t->freq);
+	t->i2c_set_freq[5] = get_freq_entry(band_table, freq);
+	t->i2c_set_freq[6] = get_freq_entry(agc_table,  freq);
 	t->i2c_set_freq[7] = 0x8f;
 }
 
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 3977363..ee35562 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -368,7 +368,7 @@
 		if (t->radio_mode == V4L2_TUNER_MODE_MONO)
 			norm = &radio_mono;
 		else
-		        norm = &radio_stereo;
+			norm = &radio_stereo;
 	} else {
 		for (i = 0; i < ARRAY_SIZE(tvnorms); i++) {
 			if (tvnorms[i].std & t->std) {
@@ -566,7 +566,6 @@
 	if (UNSET != t->pinnacle_id) {
 		tda9887_set_pinnacle(t,buf);
 	}
-
 	tda9887_set_config(t,buf);
 	tda9887_set_insmod(t,buf);
 
@@ -615,8 +614,8 @@
 	t->pinnacle_id = UNSET;
 	t->radio_mode = V4L2_TUNER_MODE_STEREO;
 
-        i2c_set_clientdata(&t->client, t);
-        i2c_attach_client(&t->client);
+	i2c_set_clientdata(&t->client, t);
+	i2c_attach_client(&t->client);
 
 	return 0;
 }
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
new file mode 100644
index 0000000..a29f08f
--- /dev/null
+++ b/drivers/media/video/tea5767.c
@@ -0,0 +1,334 @@
+/*
+ * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
+ * I2C address is allways 0xC0.
+ *
+ * $Id: tea5767.c,v 1.11 2005/06/21 15:40:33 mchehab Exp $
+ *
+ * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
+ * This code is placed under the terms of the GNU General Public License
+ *
+ * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
+ * from their contributions on DScaler.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <media/tuner.h>
+
+/* Declared at tuner-core.c */
+extern unsigned int tuner_debug;
+
+#define PREFIX "TEA5767 "
+
+/*****************************************************************************/
+
+/******************************
+ * Write mode register values *
+ ******************************/
+
+/* First register */
+#define TEA5767_MUTE		0x80 /* Mutes output */
+#define TEA5767_SEARCH		0x40 /* Activates station search */
+/* Bits 0-5 for divider MSB */
+
+/* Second register */
+/* Bits 0-7 for divider LSB */
+
+/* Third register */
+
+/* Station search from botton to up */
+#define TEA5767_SEARCH_UP	0x80
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_HIGH_LVL	0x60
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_MID_LVL	0x40
+
+/* Searches with ADC output = 5 */
+#define TEA5767_SRCH_LOW_LVL	0x20
+
+/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
+#define TEA5767_HIGH_LO_INJECT	0x10
+
+/* Disable stereo */
+#define TEA5767_MONO		0x08
+
+/* Disable right channel and turns to mono */
+#define TEA5767_MUTE_RIGHT	0x04
+
+/* Disable left channel and turns to mono */
+#define TEA5767_MUTE_LEFT	0x02
+
+#define TEA5767_PORT1_HIGH	0x01
+
+/* Forth register */
+#define TEA5767_PORT2_HIGH	0x80
+/* Chips stops working. Only I2C bus remains on */
+#define TEA5767_STDBY		0x40
+
+/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
+#define TEA5767_JAPAN_BAND	0x20
+
+/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
+#define TEA5767_XTAL_32768	0x10
+
+/* Cuts weak signals */
+#define TEA5767_SOFT_MUTE	0x08
+
+/* Activates high cut control */
+#define TEA5767_HIGH_CUT_CTRL	0x04
+
+/* Activates stereo noise control */
+#define TEA5767_ST_NOISE_CTL	0x02
+
+/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
+#define TEA5767_SRCH_IND	0x01
+
+/* Fiveth register */
+
+/* By activating, it will use Xtal at 13 MHz as reference for divider */
+#define TEA5767_PLLREF_ENABLE	0x80
+
+/* By activating, deemphasis=50, or else, deemphasis of 50us */
+#define TEA5767_DEEMPH_75	0X40
+
+/*****************************
+ * Read mode register values *
+ *****************************/
+
+/* First register */
+#define TEA5767_READY_FLAG_MASK	0x80
+#define TEA5767_BAND_LIMIT_MASK	0X40
+/* Bits 0-5 for divider MSB after search or preset */
+
+/* Second register */
+/* Bits 0-7 for divider LSB after search or preset */
+
+/* Third register */
+#define TEA5767_STEREO_MASK	0x80
+#define TEA5767_IF_CNTR_MASK	0x7f
+
+/* Four register */
+#define TEA5767_ADC_LEVEL_MASK	0xf0
+
+/* should be 0 */
+#define TEA5767_CHIP_ID_MASK	0x0f
+
+/* Fiveth register */
+/* Reserved for future extensions */
+#define TEA5767_RESERVED_MASK	0xff
+
+/*****************************************************************************/
+
+static void set_tv_freq(struct i2c_client *c, unsigned int freq)
+{
+	struct tuner *t = i2c_get_clientdata(c);
+
+	tuner_warn("This tuner doesn't support TV freq.\n");
+}
+
+static void tea5767_status_dump(unsigned char *buffer)
+{
+	unsigned int div, frq;
+
+	if (TEA5767_READY_FLAG_MASK & buffer[0])
+		printk(PREFIX "Ready Flag ON\n");
+	else
+		printk(PREFIX "Ready Flag OFF\n");
+
+	if (TEA5767_BAND_LIMIT_MASK & buffer[0])
+		printk(PREFIX "Tuner at band limit\n");
+	else
+		printk(PREFIX "Tuner not at band limit\n");
+
+	div=((buffer[0]&0x3f)<<8) | buffer[1];
+
+	switch (TEA5767_HIGH_LO_32768) {
+	case TEA5767_HIGH_LO_13MHz:
+		frq = 1000*(div*50-700-225)/4; /* Freq in KHz */
+		break;
+	case TEA5767_LOW_LO_13MHz:
+		frq = 1000*(div*50+700+225)/4; /* Freq in KHz */
+		break;
+	case TEA5767_LOW_LO_32768:
+		frq = 1000*(div*32768/1000+700+225)/4; /* Freq in KHz */
+		break;
+	case TEA5767_HIGH_LO_32768:
+	default:
+		frq = 1000*(div*32768/1000-700-225)/4; /* Freq in KHz */
+		break;
+	}
+        buffer[0] = (div>>8) & 0x3f;
+        buffer[1] = div      & 0xff;
+
+	printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
+						frq/1000,frq%1000,div);
+
+	if (TEA5767_STEREO_MASK & buffer[2])
+		printk(PREFIX "Stereo\n");
+	else
+		printk(PREFIX "Mono\n");
+
+	printk(PREFIX "IF Counter = %d\n",buffer[2] & TEA5767_IF_CNTR_MASK);
+
+	printk(PREFIX "ADC Level = %d\n",(buffer[3] & TEA5767_ADC_LEVEL_MASK)>>4);
+
+	printk(PREFIX "Chip ID = %d\n",(buffer[3] & TEA5767_CHIP_ID_MASK));
+
+	printk(PREFIX "Reserved = 0x%02x\n",(buffer[4] & TEA5767_RESERVED_MASK));
+}
+
+/* Freq should be specifyed at 62.5 Hz */
+static void set_radio_freq(struct i2c_client *c, unsigned int frq)
+{
+	struct tuner *t = i2c_get_clientdata(c);
+        unsigned char buffer[5];
+	unsigned div;
+	int rc;
+
+	if ( tuner_debug )
+		printk(PREFIX "radio freq counter %d\n",frq);
+
+	/* Rounds freq to next decimal value - for 62.5 KHz step */
+	/* frq = 20*(frq/16)+radio_frq[frq%16]; */
+
+	buffer[2] = TEA5767_PORT1_HIGH;
+	buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
+	buffer[4]=0;
+
+	if (t->audmode == V4L2_TUNER_MODE_MONO) {
+		tuner_dbg("TEA5767 set to mono\n");
+		buffer[2] |= TEA5767_MONO;
+	} else
+ 		tuner_dbg("TEA5767 set to stereo\n");
+
+	switch (t->type) {
+	case TEA5767_HIGH_LO_13MHz:
+		tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
+		buffer[2] |= TEA5767_HIGH_LO_INJECT;
+		buffer[4] |= TEA5767_PLLREF_ENABLE;
+		div = (frq*4/16+700+225+25)/50;
+		break;
+	case TEA5767_LOW_LO_13MHz:
+		tuner_dbg("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
+
+		buffer[4] |= TEA5767_PLLREF_ENABLE;
+		div = (frq*4/16-700-225+25)/50;
+		break;
+	case TEA5767_LOW_LO_32768:
+		tuner_dbg("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
+		buffer[3] |= TEA5767_XTAL_32768;
+		/* const 700=4000*175 Khz - to adjust freq to right value */
+		div = (1000*(frq*4/16-700-225)+16384)>>15;
+		break;
+	case TEA5767_HIGH_LO_32768:
+	default:
+		tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
+
+		buffer[2] |= TEA5767_HIGH_LO_INJECT;
+		buffer[3] |= TEA5767_XTAL_32768;
+		div = (1000*(frq*4/16+700+225)+16384)>>15;
+		break;
+	}
+        buffer[0] = (div>>8) & 0x3f;
+        buffer[1] = div      & 0xff;
+
+	if ( tuner_debug )
+		tea5767_status_dump(buffer);
+
+        if (5 != (rc = i2c_master_send(c,buffer,5)))
+		tuner_warn("i2c i/o error: rc == %d (should be 5)\n",rc);
+}
+
+static int tea5767_signal(struct i2c_client *c)
+{
+	unsigned char buffer[5];
+	int rc;
+	struct tuner *t = i2c_get_clientdata(c);
+
+	memset(buffer,0,sizeof(buffer));
+        if (5 != (rc = i2c_master_recv(c,buffer,5)))
+                tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+	return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) <<(13-4));
+}
+
+static int tea5767_stereo(struct i2c_client *c)
+{
+	unsigned char buffer[5];
+	int rc;
+	struct tuner *t = i2c_get_clientdata(c);
+
+	memset(buffer,0,sizeof(buffer));
+        if (5 != (rc = i2c_master_recv(c,buffer,5)))
+                tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+	rc = buffer[2] & TEA5767_STEREO_MASK;
+
+	if ( tuner_debug )
+		tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
+
+	return ( (buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO: 0);
+}
+
+int tea_detection(struct i2c_client *c)
+{
+	unsigned char buffer[5]= { 0xff, 0xff, 0xff, 0xff, 0xff };
+	int rc;
+	struct tuner *t = i2c_get_clientdata(c);
+
+        if (5 != (rc = i2c_master_recv(c,buffer,5))) {
+                tuner_warn ( "it is not a TEA5767. Received %i chars.\n",rc );
+		return EINVAL;
+	}
+
+	/* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+	if (buffer[0] == buffer[1] &&  buffer[0] == buffer[2] &&
+	    buffer[0] == buffer[3] &&  buffer[0] == buffer[4]) {
+                tuner_warn ( "All bytes are equal. It is not a TEA5767\n" );
+		return EINVAL;
+	}
+
+	/*  Status bytes:
+	 *  Byte 4: bit 3:1 : CI (Chip Identification) == 0
+	 *	    bit 0   : internally set to 0
+	 *  Byte 5: bit 7:0 : == 0
+	 */
+
+	if (!((buffer[3] & 0x0f) == 0x00) && (buffer[4] == 0x00)) {
+                tuner_warn ( "Chip ID is not zero. It is not a TEA5767\n" );
+		return EINVAL;
+	}
+	tuner_warn ( "TEA5767 detected.\n" );
+	return 0;
+}
+
+int tea5767_tuner_init(struct i2c_client *c)
+{
+	struct tuner *t = i2c_get_clientdata(c);
+
+	if (tea_detection(c)==EINVAL) return EINVAL;
+
+        tuner_info("type set to %d (%s)\n",
+                   t->type, TEA5767_TUNER_NAME);
+        strlcpy(c->name, TEA5767_TUNER_NAME, sizeof(c->name));
+
+	t->tv_freq    = set_tv_freq;
+	t->radio_freq = set_radio_freq;
+	t->has_signal = tea5767_signal;
+	t->is_stereo  = tea5767_stereo;
+
+	return (0);
+}
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index eaabfc8..6f6bf4a 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-core.c,v 1.15 2005/06/12 01:36:14 mchehab Exp $
+ * $Id: tuner-core.c,v 1.29 2005/06/21 15:40:33 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * core core, i.e. kernel interfaces, registering and so on
@@ -26,7 +26,6 @@
 /*
  * comment line bellow to return to old behavor, where only one I2C device is supported
  */
-#define CONFIG_TUNER_MULTI_I2C /**/
 
 #define UNSET (-1U)
 
@@ -58,9 +57,7 @@
 MODULE_LICENSE("GPL");
 
 static int this_adap;
-#ifdef CONFIG_TUNER_MULTI_I2C
 static unsigned short first_tuner, tv_tuner, radio_tuner;
-#endif
 
 static struct i2c_driver driver;
 static struct i2c_client client_template;
@@ -81,26 +78,9 @@
 		return;
 	}
 	if (freq < tv_range[0]*16 || freq > tv_range[1]*16) {
-
-		if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
-			/* V4L2_TUNER_CAP_LOW frequency */
-
-			tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for TV. Tuners yet doesn't support converting it to valid freq.\n");
-
-			t->tv_freq(c,freq>>10);
-
-			return;
-                } else {
-			/* FIXME: better do that chip-specific, but
-			   right now we don't have that in the config
-			   struct and this way is still better than no
-			   check at all */
 			tuner_info("TV freq (%d.%02d) out of range (%d-%d)\n",
 				   freq/16,freq%16*100/16,tv_range[0],tv_range[1]);
-			return;
-		}
 	}
-	tuner_dbg("62.5 Khz freq step selected for TV.\n");
 	t->tv_freq(c,freq);
 }
 
@@ -116,31 +96,18 @@
 		tuner_info("no radio tuning for this one, sorry.\n");
 		return;
 	}
-	if (freq < radio_range[0]*16 || freq > radio_range[1]*16) {
-		if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
-			/* V4L2_TUNER_CAP_LOW frequency */
-			if (t->type == TUNER_TEA5767) {
-				tuner_info("radio freq step 62.5Hz (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
-				t->radio_freq(c,freq>>10);
-				return;
-			}
-
-			tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for Radio. Tuners yet doesn't support converting it to valid freq.\n");
-
-			tuner_info("radio freq (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
-
-			t->radio_freq(c,freq>>10);
-			return;
-
-                } else {
-			tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
-			   freq/16,freq%16*100/16,
-				   radio_range[0],radio_range[1]);
-			return;
-		}
+	if (freq >= radio_range[0]*16000 && freq <= radio_range[1]*16000) {
+		if (tuner_debug)
+			tuner_info("radio freq step 62.5Hz (%d.%06d)\n",
+			 		    freq/16000,freq%16000*1000/16);
+		t->radio_freq(c,freq);
+        } else {
+		tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
+			    freq/16,freq%16*100/16,
+			    radio_range[0],radio_range[1]);
 	}
-	tuner_dbg("62.5 Khz freq step selected for Radio.\n");
-	t->radio_freq(c,freq);
+
+	return;
 }
 
 static void set_freq(struct i2c_client *c, unsigned long freq)
@@ -166,8 +133,8 @@
 static void set_type(struct i2c_client *c, unsigned int type)
 {
 	struct tuner *t = i2c_get_clientdata(c);
+	unsigned char buffer[4];
 
-	tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
 	/* sanity check */
 	if (type == UNSET || type == TUNER_ABSENT)
 		return;
@@ -179,8 +146,8 @@
 		t->type = type;
 		return;
 	}
-	if (t->initialized)
-		/* run only once */
+	if ((t->initialized) && (t->type == type))
+		/* run only once except type change  Hac 04/05*/
 		return;
 
 	t->initialized = 1;
@@ -193,25 +160,42 @@
 	case TUNER_PHILIPS_TDA8290:
 		tda8290_init(c);
 		break;
+	case TUNER_TEA5767:
+		if (tea5767_tuner_init(c)==EINVAL) t->type=TUNER_ABSENT;
+		break;
+	case TUNER_PHILIPS_FMD1216ME_MK3:
+		buffer[0] = 0x0b;
+		buffer[1] = 0xdc;
+		buffer[2] = 0x9c;
+		buffer[3] = 0x60;
+    		i2c_master_send(c,buffer,4);
+		mdelay(1);
+		buffer[2] = 0x86;
+		buffer[3] = 0x54;
+    		i2c_master_send(c,buffer,4);
+		default_tuner_init(c);
+		break;
 	default:
+		/* TEA5767 autodetection code */
+			if (tea5767_tuner_init(c)!=EINVAL) {
+				t->type = TUNER_TEA5767;
+				if (first_tuner == 0x60)
+					first_tuner++;
+				break;
+			}
+
 		default_tuner_init(c);
 		break;
 	}
+	tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
 }
 
-#ifdef CONFIG_TUNER_MULTI_I2C
 #define CHECK_ADDR(tp,cmd,tun)	if (client->addr!=tp) { \
-			  return 0; } else \
+			  return 0; } else if (tuner_debug) \
 			  tuner_info ("Cmd %s accepted to "tun"\n",cmd);
 #define CHECK_MODE(cmd)	if (t->mode == V4L2_TUNER_RADIO) { \
 		 	CHECK_ADDR(radio_tuner,cmd,"radio") } else \
 			{ CHECK_ADDR(tv_tuner,cmd,"TV"); }
-#else
-#define CHECK_ADDR(tp,cmd,tun) tuner_info ("Cmd %s accepted to "tun"\n",cmd);
-#define CHECK_MODE(cmd) tuner_info ("Cmd %s accepted\n",cmd);
-#endif
-
-#ifdef CONFIG_TUNER_MULTI_I2C
 
 static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
 {
@@ -242,9 +226,6 @@
 	}
 	set_type(c,tun_addr->type);
 }
-#else
-#define set_addr(c,tun_addr) set_type(c,(tun_addr)->type)
-#endif
 
 static char pal[] = "-";
 module_param_string(pal, pal, sizeof(pal), 0644);
@@ -284,17 +265,12 @@
 {
 	struct tuner *t;
 
-#ifndef CONFIG_TUNER_MULTI_I2C
-	if (this_adap > 0)
-		return -1;
-#else
 	/* by default, first I2C card is both tv and radio tuner */
 	if (this_adap == 0) {
 		first_tuner = addr;
 		tv_tuner = addr;
 		radio_tuner = addr;
 	}
-#endif
 	this_adap++;
 
         client_template.adapter = adap;
@@ -308,6 +284,7 @@
 	i2c_set_clientdata(&t->i2c, t);
 	t->type       = UNSET;
 	t->radio_if2  = 10700*1000; /* 10.7MHz - FM radio */
+	t->audmode    = V4L2_TUNER_MODE_STEREO;
 
         i2c_attach_client(&t->i2c);
 	tuner_info("chip found @ 0x%x (%s)\n",
@@ -325,11 +302,9 @@
 	}
 	this_adap = 0;
 
-#ifdef CONFIG_TUNER_MULTI_I2C
 	first_tuner = 0;
 	tv_tuner = 0;
 	radio_tuner = 0;
-#endif
 
 	if (adap->class & I2C_CLASS_TV_ANALOG)
 		return i2c_probe(adap, &addr_data, tuner_attach);
@@ -392,8 +367,7 @@
 			t->radio_if2 = 41300 * 1000;
 			break;
 		}
-                break;
-
+		break;
 	/* --- v4l ioctls --- */
 	/* take care: bttv does userspace copying, we'll get a
 	   kernel pointer here... */
@@ -440,11 +414,18 @@
 				vt->signal = t->has_signal(client);
 			if (t->is_stereo) {
 				if (t->is_stereo(client))
-					vt-> flags |= VIDEO_TUNER_STEREO_ON;
+					vt->flags |= VIDEO_TUNER_STEREO_ON;
 				else
-					vt-> flags &= 0xffff ^ VIDEO_TUNER_STEREO_ON;
+					vt->flags &= ~VIDEO_TUNER_STEREO_ON;
 			}
 			vt->flags |= V4L2_TUNER_CAP_LOW; /* Allow freqs at 62.5 Hz */
+
+			vt->rangelow = radio_range[0] * 16000;
+			vt->rangehigh = radio_range[1] * 16000;
+
+		} else {
+			vt->rangelow = tv_range[0] * 16;
+			vt->rangehigh = tv_range[1] * 16;
 		}
 
 		return 0;
@@ -510,20 +491,46 @@
 				tuner -> signal = t->has_signal(client);
 			if (t->is_stereo) {
 				if (t->is_stereo(client)) {
-					tuner -> capability |= V4L2_TUNER_CAP_STEREO;
-					tuner -> rxsubchans |= V4L2_TUNER_SUB_STEREO;
+					tuner -> rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
 				} else {
-					tuner -> rxsubchans &= 0xffff ^ V4L2_TUNER_SUB_STEREO;
+					tuner -> rxsubchans = V4L2_TUNER_SUB_MONO;
 				}
 			}
+			tuner->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+			tuner->audmode = t->audmode;
+
+			tuner->rangelow = radio_range[0] * 16000;
+			tuner->rangehigh = radio_range[1] * 16000;
+		} else {
+			tuner->rangelow = tv_range[0] * 16;
+			tuner->rangehigh = tv_range[1] * 16;
 		}
-		/* Wow to deal with V4L2_TUNER_CAP_LOW ? For now, it accepts from low at 62.5KHz step  to high at 62.5 Hz */
-		tuner->rangelow = tv_range[0] * 16;
-//		tuner->rangehigh = tv_range[1] * 16;
-//		tuner->rangelow = tv_range[0] * 16384;
-		tuner->rangehigh = tv_range[1] * 16384;
 		break;
 	}
+	case VIDIOC_S_TUNER: /* Allow changing radio range and audio mode */
+	{
+		struct v4l2_tuner *tuner = arg;
+
+		CHECK_ADDR(radio_tuner,"VIDIOC_S_TUNER","radio");
+		SWITCH_V4L2;
+
+		/* To switch the audio mode, applications initialize the
+		   index and audmode fields and the reserved array and
+		   call the VIDIOC_S_TUNER ioctl. */
+		/* rxsubchannels: V4L2_TUNER_MODE_MONO, V4L2_TUNER_MODE_STEREO,
+		   V4L2_TUNER_MODE_LANG1, V4L2_TUNER_MODE_LANG2,
+		   V4L2_TUNER_MODE_SAP */
+
+		if (tuner->audmode == V4L2_TUNER_MODE_MONO)
+			t->audmode = V4L2_TUNER_MODE_MONO;
+		else
+			t->audmode = V4L2_TUNER_MODE_STEREO;
+
+		set_radio_freq(client, t->freq);
+		break;
+	}
+	case TDA9887_SET_CONFIG: /* Nothing to do on tuner-core */
+		break;
 	default:
 		tuner_dbg ("Unimplemented IOCTL 0x%08x called to tuner.\n", cmd);
 		/* nothing */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 539f305..c39ed62 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-simple.c,v 1.21 2005/06/10 19:53:26 nsh Exp $
+ * $Id: tuner-simple.c,v 1.31 2005/06/21 16:02:25 mkrufky Exp $
  *
  * i2c tv tuner chip device driver
  * controls all those simple 4-control-bytes style tuners.
@@ -207,28 +207,27 @@
 	{ "LG PAL (TAPE series)", LGINNOTEK, PAL,
           16*170.00, 16*450.00, 0x01,0x02,0x08,0xce,623},
 
-        { "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
-          16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
-        { "Philips FQ1236A MK4", Philips, NTSC,
-          16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
+	{ "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
+	  16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
+	{ "Philips FQ1236A MK4", Philips, NTSC,
+	  16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
 
 	/* Should work for TVF8531MF, TVF8831MF, TVF8731MF */
 	{ "Ymec TVision TVF-8531MF", Philips, NTSC,
 	  16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732},
 	{ "Ymec TVision TVF-5533MF", Philips, NTSC,
 	  16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732},
-
 	{ "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC,
 	  16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732},
-	{ "Tena TNF9533-D/IF", LGINNOTEK, PAL,
-	  16*160.25, 16*464.25, 0x01,0x02,0x08,0x8e,623},
+	/* Should work for TNF9533-D/IF, TNF9533-B/DF */
+	{ "Tena TNF9533-D/IF", Philips, PAL,
+          16*160.25,16*464.25,0x01,0x02,0x04,0x8e,623},
 
-	/*
-	 * This entry is for TEA5767 FM radio only chip used on several boards
-	 * w/TV tuner
-	 */
+	/* This entry is for TEA5767 FM radio only chip used on several boards w/TV tuner */
 	{ TEA5767_TUNER_NAME, Philips, RADIO,
-	  -1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
+          -1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
+	{ "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
+	  16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
 };
 
 unsigned const int tuner_count = ARRAY_SIZE(tuners);
@@ -455,24 +454,24 @@
 	int rc;
 
 	tun=&tuners[t->type];
-	div = freq + (int)(16*10.7);
+	div = (freq / 1000) + (int)(16*10.7);
 	buffer[2] = tun->config;
 
 	switch (t->type) {
 	case TUNER_TENA_9533_DI:
 	case TUNER_YMEC_TVF_5533MF:
-
 		/*These values are empirically determinated */
-		div = (freq*122)/16 - 20;
+		div = (freq * 122) / 16000 - 20;
 		buffer[2] = 0x88; /* could be also 0x80 */
 		buffer[3] = 0x19; /* could be also 0x10, 0x18, 0x99 */
 		break;
 	case TUNER_PHILIPS_FM1216ME_MK3:
 	case TUNER_PHILIPS_FM1236_MK3:
+	case TUNER_PHILIPS_FMD1216ME_MK3:
 		buffer[3] = 0x19;
 		break;
 	case TUNER_PHILIPS_FM1256_IH3:
-		div = (20 * freq)/16 + 333 * 2;
+		div = (20 * freq) / 16000 + 333 * 2;
 	        buffer[2] = 0x80;
 		buffer[3] = 0x19;
 		break;
@@ -505,6 +504,7 @@
 	t->radio_freq = default_set_radio_freq;
 	t->has_signal = tuner_signal;
 	t->is_stereo  = tuner_stereo;
+
 	return 0;
 }
 
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index d8d6539..353deb2 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -364,9 +364,7 @@
 	.id_table	= mptfc_pci_table,
 	.probe		= mptfc_probe,
 	.remove		= __devexit_p(mptscsih_remove),
-	.driver         = {
-		.shutdown = mptscsih_shutdown,
-        },
+	.shutdown	= mptscsih_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index a0078ae..4f973a4 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -170,7 +170,7 @@
 #endif
 
 void 		mptscsih_remove(struct pci_dev *);
-void 		mptscsih_shutdown(struct device *);
+void 		mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
 int 		mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
 int 		mptscsih_resume(struct pci_dev *pdev);
@@ -988,7 +988,7 @@
 #endif
 #endif
 
-	mptscsih_shutdown(&pdev->dev);
+	mptscsih_shutdown(pdev);
 
 	sz1=0;
 
@@ -1026,9 +1026,9 @@
  *
  */
 void
-mptscsih_shutdown(struct device * dev)
+mptscsih_shutdown(struct pci_dev *pdev)
 {
-	MPT_ADAPTER 		*ioc = pci_get_drvdata(to_pci_dev(dev));
+	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
 	struct Scsi_Host 	*host = ioc->sh;
 	MPT_SCSI_HOST		*hd;
 
@@ -1054,7 +1054,7 @@
 int
 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
-	mptscsih_shutdown(&pdev->dev);
+	mptscsih_shutdown(pdev);
 	return mpt_suspend(pdev,state);
 }
 
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index d73aec3..5ea89bf 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -82,7 +82,7 @@
 #endif
 
 extern void mptscsih_remove(struct pci_dev *);
-extern void mptscsih_shutdown(struct device *);
+extern void mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
 extern int mptscsih_suspend(struct pci_dev *pdev, u32 state);
 extern int mptscsih_resume(struct pci_dev *pdev);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 5f9a61b..e0c0ee5 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -419,9 +419,7 @@
 	.id_table	= mptspi_pci_table,
 	.probe		= mptspi_probe,
 	.remove		= __devexit_p(mptscsih_remove),
-	.driver         = {
-		.shutdown = mptscsih_shutdown,
-        },
+	.shutdown	= mptscsih_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 1e56c8e..d0fa244 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2447,9 +2447,8 @@
 #endif
 
 
-static void e100_shutdown(struct device *dev)
+static void e100_shutdown(struct pci_dev *pdev)
 {
-	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
@@ -2470,11 +2469,7 @@
 	.suspend =      e100_suspend,
 	.resume =       e100_resume,
 #endif
-
-	.driver = {
-		.shutdown = e100_shutdown,
-	}
-
+	.shutdown =	e100_shutdown,
 };
 
 static int __init e100_init_module(void)
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a56ef0d..fc7738f 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -507,7 +507,7 @@
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static struct ethtool_ops netdev_ethtool_ops;
 static int  rhine_close(struct net_device *dev);
-static void rhine_shutdown (struct device *gdev);
+static void rhine_shutdown (struct pci_dev *pdev);
 
 #define RHINE_WAIT_FOR(condition) do {					\
 	int i=1024;							\
@@ -1895,9 +1895,8 @@
 	pci_set_drvdata(pdev, NULL);
 }
 
-static void rhine_shutdown (struct device *gendev)
+static void rhine_shutdown (struct pci_dev *pdev)
 {
-	struct pci_dev *pdev = to_pci_dev(gendev);
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
@@ -1956,7 +1955,7 @@
 	pci_save_state(pdev);
 
 	spin_lock_irqsave(&rp->lock, flags);
-	rhine_shutdown(&pdev->dev);
+	rhine_shutdown(pdev);
 	spin_unlock_irqrestore(&rp->lock, flags);
 
 	free_irq(dev->irq, dev);
@@ -2010,9 +2009,7 @@
 	.suspend	= rhine_suspend,
 	.resume		= rhine_resume,
 #endif /* CONFIG_PM */
-	.driver = {
-		.shutdown = rhine_shutdown,
-	}
+	.shutdown =	rhine_shutdown,
 };
 
 
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index b0d2a73..2f2dbef2 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -993,6 +993,7 @@
 	bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
 				    &dino_cfg_ops, NULL);
 	if(bus) {
+		pci_bus_add_devices(bus);
 		/* This code *depends* on scanning being single threaded
 		 * if it isn't, this global bus number count will fail
 		 */
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index dc83880..7fdd80b 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1570,6 +1570,8 @@
 	lba_bus = lba_dev->hba.hba_bus =
 		pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
 				cfg_ops, NULL);
+	if (lba_bus)
+		pci_bus_add_devices(lba_bus);
 
 	/* This is in lieu of calling pci_assign_unassigned_resources() */
 	if (is_pdc_pat()) {
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index dbd3360..fedae89 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -121,10 +121,13 @@
 		 * If there is an unattached subordinate bus, attach
 		 * it and then scan for unattached PCI devices.
 		 */
-		if (dev->subordinate && list_empty(&dev->subordinate->node)) {
-			spin_lock(&pci_bus_lock);
-			list_add_tail(&dev->subordinate->node, &dev->bus->children);
-			spin_unlock(&pci_bus_lock);
+		if (dev->subordinate) {
+		       if (list_empty(&dev->subordinate->node)) {
+			       spin_lock(&pci_bus_lock);
+			       list_add_tail(&dev->subordinate->node,
+					       &dev->bus->children);
+			       spin_unlock(&pci_bus_lock);
+		       }
 			pci_bus_add_devices(dev->subordinate);
 
 			sysfs_create_link(&dev->subordinate->class_dev.kobj, &dev->dev.kobj, "bridge");
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 93c120d..3e632ff 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -36,9 +36,7 @@
 				ibmphp_hpc.o
 
 acpiphp-objs		:=	acpiphp_core.o	\
-				acpiphp_glue.o	\
-				acpiphp_pci.o	\
-				acpiphp_res.o
+				acpiphp_glue.o
 
 rpaphp-objs		:=	rpaphp_core.o	\
 				rpaphp_pci.o	\
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index d949987..293603e 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -7,6 +7,8 @@
  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
  * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
+ * Copyright (C) 2003-2005 Hewlett Packard
  *
  * All rights reserved.
  *
@@ -52,7 +54,6 @@
 
 struct acpiphp_bridge;
 struct acpiphp_slot;
-struct pci_resource;
 
 /*
  * struct slot - slot information for each *physical* slot
@@ -65,15 +66,6 @@
 	struct acpiphp_slot	*acpi_slot;
 };
 
-/*
- * struct pci_resource - describes pci resource (mem, pfmem, io, bus)
- */
-struct pci_resource {
-	struct pci_resource * next;
-	u64 base;
-	u32 length;
-};
-
 /**
  * struct hpp_param - ACPI 2.0 _HPP Hot Plug Parameters
  * @cache_line_size in DWORD
@@ -101,10 +93,6 @@
 	int type;
 	int nr_slots;
 
-	u8 seg;
-	u8 bus;
-	u8 sub;
-
 	u32 flags;
 
 	/* This bus (host bridge) or Secondary bus (PCI-to-PCI bridge) */
@@ -117,12 +105,6 @@
 	struct hpp_param hpp;
 
 	spinlock_t res_lock;
-
-	/* available resources on this bus */
-	struct pci_resource *mem_head;
-	struct pci_resource *p_mem_head;
-	struct pci_resource *io_head;
-	struct pci_resource *bus_head;
 };
 
 
@@ -163,12 +145,6 @@
 
 	u8		function;	/* pci function# */
 	u32		flags;		/* see below */
-
-	/* resources used for this function */
-	struct pci_resource *mem_head;
-	struct pci_resource *p_mem_head;
-	struct pci_resource *io_head;
-	struct pci_resource *bus_head;
 };
 
 /**
@@ -243,25 +219,6 @@
 extern u8 acpiphp_get_adapter_status (struct acpiphp_slot *slot);
 extern u32 acpiphp_get_address (struct acpiphp_slot *slot);
 
-/* acpiphp_pci.c */
-extern struct pci_dev *acpiphp_allocate_pcidev (struct pci_bus *pbus, int dev, int fn);
-extern int acpiphp_configure_slot (struct acpiphp_slot *slot);
-extern int acpiphp_configure_function (struct acpiphp_func *func);
-extern void acpiphp_unconfigure_function (struct acpiphp_func *func);
-extern int acpiphp_detect_pci_resource (struct acpiphp_bridge *bridge);
-extern int acpiphp_init_func_resource (struct acpiphp_func *func);
-
-/* acpiphp_res.c */
-extern struct pci_resource *acpiphp_get_io_resource (struct pci_resource **head, u32 size);
-extern struct pci_resource *acpiphp_get_resource (struct pci_resource **head, u32 size);
-extern struct pci_resource *acpiphp_get_resource_with_base (struct pci_resource **head, u64 base, u32 size);
-extern int acpiphp_resource_sort_and_combine (struct pci_resource **head);
-extern struct pci_resource *acpiphp_make_resource (u64 base, u32 length);
-extern void acpiphp_move_resource (struct pci_resource **from, struct pci_resource **to);
-extern void acpiphp_free_resource (struct pci_resource **res);
-extern void acpiphp_dump_resource (struct acpiphp_bridge *bridge); /* debug */
-extern void acpiphp_dump_func_resource (struct acpiphp_func *func); /* debug */
-
 /* variables */
 extern int acpiphp_debug;
 
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4539e61..60c4c38 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -7,6 +7,8 @@
  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
  * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
+ * Copyright (C) 2003-2005 Hewlett Packard
  *
  * All rights reserved.
  *
@@ -53,8 +55,8 @@
 static int num_slots;
 static struct acpiphp_attention_info *attention_info;
 
-#define DRIVER_VERSION	"0.4"
-#define DRIVER_AUTHOR	"Greg Kroah-Hartman <gregkh@us.ibm.com>, Takayoshi Kochi <t-kochi@bq.jp.nec.com>"
+#define DRIVER_VERSION	"0.5"
+#define DRIVER_AUTHOR	"Greg Kroah-Hartman <gregkh@us.ibm.com>, Takayoshi Kochi <t-kochi@bq.jp.nec.com>, Matthew Wilcox <willy@hp.com>"
 #define DRIVER_DESC	"ACPI Hot Plug PCI Controller Driver"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -281,8 +283,7 @@
 /**
  * get_address - get pci address of a slot
  * @hotplug_slot: slot to get status
- * @busdev: pointer to struct pci_busdev (seg, bus, dev)
- *
+ * @value: pointer to struct pci_busdev (seg, bus, dev)
  */
 static int get_address(struct hotplug_slot *hotplug_slot, u32 *value)
 {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index e7f4129..424e7de 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -4,6 +4,10 @@
  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
  * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
+ * Copyright (C) 2003-2005 Hewlett Packard
+ * Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com)
+ * Copyright (C) 2005 Intel Corporation
  *
  * All rights reserved.
  *
@@ -26,6 +30,16 @@
  *
  */
 
+/*
+ * Lifetime rules for pci_dev:
+ *  - The one in acpiphp_func has its refcount elevated by pci_get_slot()
+ *    when the driver is loaded or when an insertion event occurs.  It loses
+ *    a refcount when its ejected or the driver unloads.
+ *  - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
+ *    when the bridge is scanned and it loses a refcount when the bridge
+ *    is removed.
+ */
+
 #include <linux/init.h>
 #include <linux/module.h>
 
@@ -178,21 +192,18 @@
 
 		bridge->nr_slots++;
 
-		dbg("found ACPI PCI Hotplug slot at PCI %02x:%02x Slot:%d\n",
-		    slot->bridge->bus, slot->device, slot->sun);
+		dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+				slot->sun, pci_domain_nr(bridge->pci_bus),
+				bridge->pci_bus->number, slot->device);
 	}
 
 	newfunc->slot = slot;
 	list_add_tail(&newfunc->sibling, &slot->funcs);
 
 	/* associate corresponding pci_dev */
-	newfunc->pci_dev = pci_find_slot(bridge->bus,
+	newfunc->pci_dev = pci_get_slot(bridge->pci_bus,
 					 PCI_DEVFN(device, function));
 	if (newfunc->pci_dev) {
-		if (acpiphp_init_func_resource(newfunc) < 0) {
-			kfree(newfunc);
-			return AE_ERROR;
-		}
 		slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
 	}
 
@@ -227,62 +238,6 @@
 }
 
 
-/* decode ACPI _CRS data and convert into our internal resource list
- * TBD: _TRA, etc.
- */
-static acpi_status
-decode_acpi_resource(struct acpi_resource *resource, void *context)
-{
-	struct acpiphp_bridge *bridge = (struct acpiphp_bridge *) context;
-	struct acpi_resource_address64 address;
-	struct pci_resource *res;
-
-	if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
-	    resource->id != ACPI_RSTYPE_ADDRESS32 &&
-	    resource->id != ACPI_RSTYPE_ADDRESS64)
-		return AE_OK;
-
-	acpi_resource_to_address64(resource, &address);
-
-	if (address.producer_consumer == ACPI_PRODUCER && address.address_length > 0) {
-		dbg("resource type: %d: 0x%llx - 0x%llx\n", address.resource_type,
-		    (unsigned long long)address.min_address_range,
-		    (unsigned long long)address.max_address_range);
-		res = acpiphp_make_resource(address.min_address_range,
-				    address.address_length);
-		if (!res) {
-			err("out of memory\n");
-			return AE_OK;
-		}
-
-		switch (address.resource_type) {
-		case ACPI_MEMORY_RANGE:
-			if (address.attribute.memory.cache_attribute == ACPI_PREFETCHABLE_MEMORY) {
-				res->next = bridge->p_mem_head;
-				bridge->p_mem_head = res;
-			} else {
-				res->next = bridge->mem_head;
-				bridge->mem_head = res;
-			}
-			break;
-		case ACPI_IO_RANGE:
-			res->next = bridge->io_head;
-			bridge->io_head = res;
-			break;
-		case ACPI_BUS_NUMBER_RANGE:
-			res->next = bridge->bus_head;
-			bridge->bus_head = res;
-			break;
-		default:
-			/* invalid type */
-			kfree(res);
-			break;
-		}
-	}
-
-	return AE_OK;
-}
-
 /* decode ACPI 2.0 _HPP hot plug parameters */
 static void decode_hpp(struct acpiphp_bridge *bridge)
 {
@@ -346,34 +301,29 @@
 	/* decode ACPI 2.0 _HPP (hot plug parameters) */
 	decode_hpp(bridge);
 
-	/* subtract all resources already allocated */
-	acpiphp_detect_pci_resource(bridge);
-
 	/* register all slot objects under this bridge */
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1,
 				     register_slot, bridge, NULL);
 
 	/* install notify handler */
-	status = acpi_install_notify_handler(bridge->handle,
+	if (bridge->type != BRIDGE_TYPE_HOST) {
+		status = acpi_install_notify_handler(bridge->handle,
 					     ACPI_SYSTEM_NOTIFY,
 					     handle_hotplug_event_bridge,
 					     bridge);
 
-	if (ACPI_FAILURE(status)) {
-		err("failed to register interrupt notify handler\n");
+		if (ACPI_FAILURE(status)) {
+			err("failed to register interrupt notify handler\n");
+		}
 	}
 
 	list_add(&bridge->list, &bridge_list);
-
-	dbg("Bridge resource:\n");
-	acpiphp_dump_resource(bridge);
 }
 
 
 /* allocate and initialize host bridge data structure */
-static void add_host_bridge(acpi_handle *handle, int seg, int bus)
+static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus)
 {
-	acpi_status status;
 	struct acpiphp_bridge *bridge;
 
 	bridge = kmalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
@@ -384,52 +334,19 @@
 
 	bridge->type = BRIDGE_TYPE_HOST;
 	bridge->handle = handle;
-	bridge->seg = seg;
-	bridge->bus = bus;
 
-	bridge->pci_bus = pci_find_bus(seg, bus);
+	bridge->pci_bus = pci_bus;
 
 	spin_lock_init(&bridge->res_lock);
 
-	/* to be overridden when we decode _CRS	*/
-	bridge->sub = bridge->bus;
-
-	/* decode resources */
-
-	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
-		decode_acpi_resource, bridge);
-
-	if (ACPI_FAILURE(status)) {
-		err("failed to decode bridge resources\n");
-		kfree(bridge);
-		return;
-	}
-
-	acpiphp_resource_sort_and_combine(&bridge->io_head);
-	acpiphp_resource_sort_and_combine(&bridge->mem_head);
-	acpiphp_resource_sort_and_combine(&bridge->p_mem_head);
-	acpiphp_resource_sort_and_combine(&bridge->bus_head);
-
-	dbg("ACPI _CRS resource:\n");
-	acpiphp_dump_resource(bridge);
-
-	if (bridge->bus_head) {
-		bridge->bus = bridge->bus_head->base;
-		bridge->sub = bridge->bus_head->base + bridge->bus_head->length - 1;
-	}
-
 	init_bridge_misc(bridge);
 }
 
 
 /* allocate and initialize PCI-to-PCI bridge data structure */
-static void add_p2p_bridge(acpi_handle *handle, int seg, int bus, int dev, int fn)
+static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev)
 {
 	struct acpiphp_bridge *bridge;
-	u8 tmp8;
-	u16 tmp16;
-	u64 base64, limit64;
-	u32 base, limit, base32u, limit32u;
 
 	bridge = kmalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
 	if (bridge == NULL) {
@@ -441,133 +358,22 @@
 
 	bridge->type = BRIDGE_TYPE_P2P;
 	bridge->handle = handle;
-	bridge->seg = seg;
 
-	bridge->pci_dev = pci_find_slot(bus, PCI_DEVFN(dev, fn));
-	if (!bridge->pci_dev) {
-		err("Can't get pci_dev\n");
-		kfree(bridge);
-		return;
-	}
-
-	bridge->pci_bus = bridge->pci_dev->subordinate;
+	bridge->pci_dev = pci_dev_get(pci_dev);
+	bridge->pci_bus = pci_dev->subordinate;
 	if (!bridge->pci_bus) {
 		err("This is not a PCI-to-PCI bridge!\n");
-		kfree(bridge);
-		return;
+		goto err;
 	}
 
 	spin_lock_init(&bridge->res_lock);
 
-	bridge->bus = bridge->pci_bus->number;
-	bridge->sub = bridge->pci_bus->subordinate;
-
-	/*
-	 * decode resources under this P2P bridge
-	 */
-
-	/* I/O resources */
-	pci_read_config_byte(bridge->pci_dev, PCI_IO_BASE, &tmp8);
-	base = tmp8;
-	pci_read_config_byte(bridge->pci_dev, PCI_IO_LIMIT, &tmp8);
-	limit = tmp8;
-
-	switch (base & PCI_IO_RANGE_TYPE_MASK) {
-	case PCI_IO_RANGE_TYPE_16:
-		base = (base << 8) & 0xf000;
-		limit = ((limit << 8) & 0xf000) + 0xfff;
-		bridge->io_head = acpiphp_make_resource((u64)base, limit - base + 1);
-		if (!bridge->io_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("16bit I/O range: %04x-%04x\n",
-		    (u32)bridge->io_head->base,
-		    (u32)(bridge->io_head->base + bridge->io_head->length - 1));
-		break;
-	case PCI_IO_RANGE_TYPE_32:
-		pci_read_config_word(bridge->pci_dev, PCI_IO_BASE_UPPER16, &tmp16);
-		base = ((u32)tmp16 << 16) | ((base << 8) & 0xf000);
-		pci_read_config_word(bridge->pci_dev, PCI_IO_LIMIT_UPPER16, &tmp16);
-		limit = (((u32)tmp16 << 16) | ((limit << 8) & 0xf000)) + 0xfff;
-		bridge->io_head = acpiphp_make_resource((u64)base, limit - base + 1);
-		if (!bridge->io_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("32bit I/O range: %08x-%08x\n",
-		    (u32)bridge->io_head->base,
-		    (u32)(bridge->io_head->base + bridge->io_head->length - 1));
-		break;
-	case 0x0f:
-		dbg("I/O space unsupported\n");
-		break;
-	default:
-		warn("Unknown I/O range type\n");
-	}
-
-	/* Memory resources (mandatory for P2P bridge) */
-	pci_read_config_word(bridge->pci_dev, PCI_MEMORY_BASE, &tmp16);
-	base = (tmp16 & 0xfff0) << 16;
-	pci_read_config_word(bridge->pci_dev, PCI_MEMORY_LIMIT, &tmp16);
-	limit = ((tmp16 & 0xfff0) << 16) | 0xfffff;
-	bridge->mem_head = acpiphp_make_resource((u64)base, limit - base + 1);
-	if (!bridge->mem_head) {
-		err("out of memory\n");
-		kfree(bridge);
-		return;
-	}
-	dbg("32bit Memory range: %08x-%08x\n",
-	    (u32)bridge->mem_head->base,
-	    (u32)(bridge->mem_head->base + bridge->mem_head->length-1));
-
-	/* Prefetchable Memory resources (optional) */
-	pci_read_config_word(bridge->pci_dev, PCI_PREF_MEMORY_BASE, &tmp16);
-	base = tmp16;
-	pci_read_config_word(bridge->pci_dev, PCI_PREF_MEMORY_LIMIT, &tmp16);
-	limit = tmp16;
-
-	switch (base & PCI_MEMORY_RANGE_TYPE_MASK) {
-	case PCI_PREF_RANGE_TYPE_32:
-		base = (base & 0xfff0) << 16;
-		limit = ((limit & 0xfff0) << 16) | 0xfffff;
-		bridge->p_mem_head = acpiphp_make_resource((u64)base, limit - base + 1);
-		if (!bridge->p_mem_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("32bit Prefetchable memory range: %08x-%08x\n",
-		    (u32)bridge->p_mem_head->base,
-		    (u32)(bridge->p_mem_head->base + bridge->p_mem_head->length - 1));
-		break;
-	case PCI_PREF_RANGE_TYPE_64:
-		pci_read_config_dword(bridge->pci_dev, PCI_PREF_BASE_UPPER32, &base32u);
-		pci_read_config_dword(bridge->pci_dev, PCI_PREF_LIMIT_UPPER32, &limit32u);
-		base64 = ((u64)base32u << 32) | ((base & 0xfff0) << 16);
-		limit64 = (((u64)limit32u << 32) | ((limit & 0xfff0) << 16)) + 0xfffff;
-
-		bridge->p_mem_head = acpiphp_make_resource(base64, limit64 - base64 + 1);
-		if (!bridge->p_mem_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("64bit Prefetchable memory range: %08x%08x-%08x%08x\n",
-		    (u32)(bridge->p_mem_head->base >> 32),
-		    (u32)(bridge->p_mem_head->base & 0xffffffff),
-		    (u32)((bridge->p_mem_head->base + bridge->p_mem_head->length - 1) >> 32),
-		    (u32)((bridge->p_mem_head->base + bridge->p_mem_head->length - 1) & 0xffffffff));
-		break;
-	case 0x0f:
-		break;
-	default:
-		warn("Unknown prefetchale memory type\n");
-	}
-
 	init_bridge_misc(bridge);
+	return;
+ err:
+	pci_dev_put(pci_dev);
+	kfree(bridge);
+	return;
 }
 
 
@@ -577,14 +383,10 @@
 {
 	acpi_status status;
 	acpi_handle dummy_handle;
-	unsigned long *segbus = context;
 	unsigned long tmp;
-	int seg, bus, device, function;
+	int device, function;
 	struct pci_dev *dev;
-
-	/* get PCI address */
-	seg = (*segbus >> 8) & 0xff;
-	bus = *segbus & 0xff;
+	struct pci_bus *pci_bus = context;
 
 	status = acpi_get_handle(handle, "_ADR", &dummy_handle);
 	if (ACPI_FAILURE(status))
@@ -599,20 +401,19 @@
 	device = (tmp >> 16) & 0xffff;
 	function = tmp & 0xffff;
 
-	dev = pci_find_slot(bus, PCI_DEVFN(device, function));
+	dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
 
-	if (!dev)
-		return AE_OK;
-
-	if (!dev->subordinate)
-		return AE_OK;
+	if (!dev || !dev->subordinate)
+		goto out;
 
 	/* check if this bridge has ejectable slots */
 	if (detect_ejectable_slots(handle) > 0) {
 		dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
-		add_p2p_bridge(handle, seg, bus, device, function);
+		add_p2p_bridge(handle, dev);
 	}
 
+ out:
+	pci_dev_put(dev);
 	return AE_OK;
 }
 
@@ -624,6 +425,7 @@
 	unsigned long tmp;
 	int seg, bus;
 	acpi_handle dummy_handle;
+	struct pci_bus *pci_bus;
 
 	/* if the bridge doesn't have _STA, we assume it is always there */
 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
@@ -653,18 +455,22 @@
 		bus = 0;
 	}
 
-	/* check if this bridge has ejectable slots */
-	if (detect_ejectable_slots(handle) > 0) {
-		dbg("found PCI host-bus bridge with hot-pluggable slots\n");
-		add_host_bridge(handle, seg, bus);
+	pci_bus = pci_find_bus(seg, bus);
+	if (!pci_bus) {
+		err("Can't find bus %04x:%02x\n", seg, bus);
 		return 0;
 	}
 
-	tmp = seg << 8 | bus;
+	/* check if this bridge has ejectable slots */
+	if (detect_ejectable_slots(handle) > 0) {
+		dbg("found PCI host-bus bridge with hot-pluggable slots\n");
+		add_host_bridge(handle, pci_bus);
+		return 0;
+	}
 
 	/* search P2P bridges under this host bridge */
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
-				     find_p2p_bridge, &tmp, NULL);
+				     find_p2p_bridge, pci_bus, NULL);
 
 	if (ACPI_FAILURE(status))
 		warn("find_p2p_bridge faied (error code = 0x%x)\n",status);
@@ -672,12 +478,205 @@
 	return 0;
 }
 
+static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle)
+{
+	struct list_head *head;
+	list_for_each(head, &bridge_list) {
+		struct acpiphp_bridge *bridge = list_entry(head,
+						struct acpiphp_bridge, list);
+		if (bridge->handle == handle)
+			return bridge;
+	}
+
+	return NULL;
+}
+
+static void cleanup_bridge(struct acpiphp_bridge *bridge)
+{
+	struct list_head *list, *tmp;
+	struct acpiphp_slot *slot;
+	acpi_status status;
+	acpi_handle handle = bridge->handle;
+
+	status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+					    handle_hotplug_event_bridge);
+	if (ACPI_FAILURE(status))
+		err("failed to remove notify handler\n");
+
+	slot = bridge->slots;
+	while (slot) {
+		struct acpiphp_slot *next = slot->next;
+		list_for_each_safe (list, tmp, &slot->funcs) {
+			struct acpiphp_func *func;
+			func = list_entry(list, struct acpiphp_func, sibling);
+			status = acpi_remove_notify_handler(func->handle,
+						ACPI_SYSTEM_NOTIFY,
+						handle_hotplug_event_func);
+			if (ACPI_FAILURE(status))
+				err("failed to remove notify handler\n");
+			pci_dev_put(func->pci_dev);
+			list_del(list);
+			kfree(func);
+		}
+		kfree(slot);
+		slot = next;
+	}
+
+	pci_dev_put(bridge->pci_dev);
+	list_del(&bridge->list);
+	kfree(bridge);
+}
+
+static acpi_status
+cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	struct acpiphp_bridge *bridge;
+
+	if (!(bridge = acpiphp_handle_to_bridge(handle)))
+		return AE_OK;
+	cleanup_bridge(bridge);
+	return AE_OK;
+}
 
 static void remove_bridge(acpi_handle handle)
 {
-	/* No-op for now .. */
+	struct acpiphp_bridge *bridge;
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (bridge) {
+		cleanup_bridge(bridge);
+	} else {
+		/* clean-up p2p bridges under this host bridge */
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+				(u32)1, cleanup_p2p_bridge, NULL, NULL);
+	}
 }
 
+static struct pci_dev * get_apic_pci_info(acpi_handle handle)
+{
+	struct acpi_pci_id id;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+
+	if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
+		return NULL;
+
+	bus = pci_find_bus(id.segment, id.bus);
+	if (!bus)
+		return NULL;
+
+	dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
+	if (!dev)
+		return NULL;
+
+	if ((dev->class != PCI_CLASS_SYSTEM_PIC_IOAPIC) &&
+	    (dev->class != PCI_CLASS_SYSTEM_PIC_IOXAPIC))
+	{
+		pci_dev_put(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int get_gsi_base(acpi_handle handle, u32 *gsi_base)
+{
+	acpi_status status;
+	int result = -1;
+	unsigned long gsb;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *obj;
+	void *table;
+
+	status = acpi_evaluate_integer(handle, "_GSB", NULL, &gsb);
+	if (ACPI_SUCCESS(status)) {
+		*gsi_base = (u32)gsb;
+		return 0;
+	}
+
+	status = acpi_evaluate_object(handle, "_MAT", NULL, &buffer);
+	if (ACPI_FAILURE(status) || !buffer.length || !buffer.pointer)
+		return -1;
+
+	obj = buffer.pointer;
+	if (obj->type != ACPI_TYPE_BUFFER)
+		goto out;
+
+	table = obj->buffer.pointer;
+	switch (((acpi_table_entry_header *)table)->type) {
+	case ACPI_MADT_IOSAPIC:
+		*gsi_base = ((struct acpi_table_iosapic *)table)->global_irq_base;
+		result = 0;
+		break;
+	case ACPI_MADT_IOAPIC:
+		*gsi_base = ((struct acpi_table_ioapic *)table)->global_irq_base;
+		result = 0;
+		break;
+	default:
+		break;
+	}
+ out:
+	acpi_os_free(buffer.pointer);
+	return result;
+}
+
+static acpi_status
+ioapic_add(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	acpi_status status;
+	unsigned long sta;
+	acpi_handle tmp;
+	struct pci_dev *pdev;
+	u32 gsi_base;
+	u64 phys_addr;
+
+	/* Evaluate _STA if present */
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+	if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL)
+		return AE_CTRL_DEPTH;
+
+	/* Scan only PCI bus scope */
+	status = acpi_get_handle(handle, "_HID", &tmp);
+	if (ACPI_SUCCESS(status))
+		return AE_CTRL_DEPTH;
+
+	if (get_gsi_base(handle, &gsi_base))
+		return AE_OK;
+
+	pdev = get_apic_pci_info(handle);
+	if (!pdev)
+		return AE_OK;
+
+	if (pci_enable_device(pdev)) {
+		pci_dev_put(pdev);
+		return AE_OK;
+	}
+
+	pci_set_master(pdev);
+
+	if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)")) {
+		pci_disable_device(pdev);
+		pci_dev_put(pdev);
+		return AE_OK;
+	}
+
+	phys_addr = pci_resource_start(pdev, 0);
+	if (acpi_register_ioapic(handle, phys_addr, gsi_base)) {
+		pci_release_region(pdev, 0);
+		pci_disable_device(pdev);
+		pci_dev_put(pdev);
+		return AE_OK;
+	}
+
+	return AE_OK;
+}
+
+static int acpiphp_configure_ioapics(acpi_handle handle)
+{
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+			    ACPI_UINT32_MAX, ioapic_add, NULL, NULL);
+	return 0;
+}
 
 static int power_on_slot(struct acpiphp_slot *slot)
 {
@@ -719,8 +718,6 @@
 	acpi_status status;
 	struct acpiphp_func *func;
 	struct list_head *l;
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
 
 	int retval = 0;
 
@@ -731,7 +728,7 @@
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
 
-		if (func->pci_dev && (func->flags & FUNC_HAS_PS3)) {
+		if (func->flags & FUNC_HAS_PS3) {
 			status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL);
 			if (ACPI_FAILURE(status)) {
 				warn("%s: _PS3 failed\n", __FUNCTION__);
@@ -742,27 +739,6 @@
 		}
 	}
 
-	list_for_each (l, &slot->funcs) {
-		func = list_entry(l, struct acpiphp_func, sibling);
-
-		/* We don't want to call _EJ0 on non-existing functions. */
-		if (func->pci_dev && (func->flags & FUNC_HAS_EJ0)) {
-			/* _EJ0 method take one argument */
-			arg_list.count = 1;
-			arg_list.pointer = &arg;
-			arg.type = ACPI_TYPE_INTEGER;
-			arg.integer.value = 1;
-
-			status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
-			if (ACPI_FAILURE(status)) {
-				warn("%s: _EJ0 failed\n", __FUNCTION__);
-				retval = -1;
-				goto err_exit;
-			} else
-				break;
-		}
-	}
-
 	/* TBD: evaluate _STA to check if the slot is disabled */
 
 	slot->flags &= (~SLOT_POWEREDON);
@@ -782,70 +758,56 @@
  */
 static int enable_device(struct acpiphp_slot *slot)
 {
-	u8 bus;
 	struct pci_dev *dev;
-	struct pci_bus *child;
+	struct pci_bus *bus = slot->bridge->pci_bus;
 	struct list_head *l;
 	struct acpiphp_func *func;
 	int retval = 0;
-	int num;
+	int num, max, pass;
 
 	if (slot->flags & SLOT_ENABLED)
 		goto err_exit;
 
 	/* sanity check: dev should be NULL when hot-plugged in */
-	dev = pci_find_slot(slot->bridge->bus, PCI_DEVFN(slot->device, 0));
+	dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0));
 	if (dev) {
 		/* This case shouldn't happen */
 		err("pci_dev structure already exists.\n");
+		pci_dev_put(dev);
 		retval = -1;
 		goto err_exit;
 	}
 
-	/* allocate resources to device */
-	retval = acpiphp_configure_slot(slot);
-	if (retval)
-		goto err_exit;
-
-	/* returned `dev' is the *first function* only! */
-	num = pci_scan_slot(slot->bridge->pci_bus, PCI_DEVFN(slot->device, 0));
-	if (num)
-		pci_bus_add_devices(slot->bridge->pci_bus);
-	dev = pci_find_slot(slot->bridge->bus, PCI_DEVFN(slot->device, 0));
-
-	if (!dev) {
+	num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
+	if (num == 0) {
 		err("No new device found\n");
 		retval = -1;
 		goto err_exit;
 	}
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		pci_read_config_byte(dev, PCI_SECONDARY_BUS, &bus);
-		child = (struct pci_bus*) pci_add_new_bus(dev->bus, dev, bus);
-		pci_do_scan_bus(child);
+	max = bus->secondary;
+	for (pass = 0; pass < 2; pass++) {
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			if (PCI_SLOT(dev->devfn) != slot->device)
+				continue;
+			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+				max = pci_scan_bridge(bus, dev, max, pass);
+		}
 	}
 
+	pci_bus_assign_resources(bus);
+	pci_bus_add_devices(bus);
+
 	/* associate pci_dev to our representation */
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
-
-		func->pci_dev = pci_find_slot(slot->bridge->bus,
-					      PCI_DEVFN(slot->device,
+		func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
 							func->function));
-		if (!func->pci_dev)
-			continue;
-
-		/* configure device */
-		retval = acpiphp_configure_function(func);
-		if (retval)
-			goto err_exit;
 	}
 
 	slot->flags |= SLOT_ENABLED;
 
-	dbg("Available resources:\n");
-	acpiphp_dump_resource(slot->bridge);
-
  err_exit:
 	return retval;
 }
@@ -866,9 +828,12 @@
 
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
+		if (!func->pci_dev)
+			continue;
 
-		if (func->pci_dev)
-			acpiphp_unconfigure_function(func);
+		pci_remove_bus_device(func->pci_dev);
+		pci_dev_put(func->pci_dev);
+		func->pci_dev = NULL;
 	}
 
 	slot->flags &= (~SLOT_ENABLED);
@@ -920,6 +885,39 @@
 }
 
 /**
+ * acpiphp_eject_slot - physically eject the slot
+ */
+static int acpiphp_eject_slot(struct acpiphp_slot *slot)
+{
+	acpi_status status;
+	struct acpiphp_func *func;
+	struct list_head *l;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+
+	list_for_each (l, &slot->funcs) {
+		func = list_entry(l, struct acpiphp_func, sibling);
+
+		/* We don't want to call _EJ0 on non-existing functions. */
+		if ((func->flags & FUNC_HAS_EJ0)) {
+			/* _EJ0 method take one argument */
+			arg_list.count = 1;
+			arg_list.pointer = &arg;
+			arg.type = ACPI_TYPE_INTEGER;
+			arg.integer.value = 1;
+
+			status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
+			if (ACPI_FAILURE(status)) {
+				warn("%s: _EJ0 failed\n", __FUNCTION__);
+				return -1;
+			} else
+				break;
+		}
+	}
+	return 0;
+}
+
+/**
  * acpiphp_check_bridge - re-enumerate devices
  *
  * Iterate over all slots under this bridge and make sure that if a
@@ -942,6 +940,8 @@
 			if (retval) {
 				err("Error occurred in disabling\n");
 				goto err_exit;
+			} else {
+				acpiphp_eject_slot(slot);
 			}
 			disabled++;
 		} else {
@@ -962,6 +962,144 @@
 	return retval;
 }
 
+static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
+{
+	u16 pci_cmd, pci_bctl;
+	struct pci_dev *cdev;
+
+	/* Program hpp values for this device */
+	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+		return;
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+			bridge->hpp.cache_line_size);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER,
+			bridge->hpp.latency_timer);
+	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+	if (bridge->hpp.enable_SERR)
+		pci_cmd |= PCI_COMMAND_SERR;
+	else
+		pci_cmd &= ~PCI_COMMAND_SERR;
+	if (bridge->hpp.enable_PERR)
+		pci_cmd |= PCI_COMMAND_PARITY;
+	else
+		pci_cmd &= ~PCI_COMMAND_PARITY;
+	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+	/* Program bridge control value and child devices */
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+				bridge->hpp.latency_timer);
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+		if (bridge->hpp.enable_SERR)
+			pci_bctl |= PCI_BRIDGE_CTL_SERR;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+		if (bridge->hpp.enable_PERR)
+			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+		if (dev->subordinate) {
+			list_for_each_entry(cdev, &dev->subordinate->devices,
+					bus_list)
+				program_hpp(cdev, bridge);
+		}
+	}
+}
+
+static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus)
+{
+	struct acpiphp_bridge bridge;
+	struct pci_dev *dev;
+
+	memset(&bridge, 0, sizeof(bridge));
+	bridge.handle = handle;
+	decode_hpp(&bridge);
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		program_hpp(dev, &bridge);
+
+}
+
+/*
+ * Remove devices for which we could not assign resources, call
+ * arch specific code to fix-up the bus
+ */
+static void acpiphp_sanitize_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	int i;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
+			struct resource *res = &dev->resource[i];
+			if ((res->flags & type_mask) && !res->start &&
+					res->end) {
+				/* Could not assign a required resources
+				 * for this device, remove it */
+				pci_remove_bus_device(dev);
+				break;
+			}
+		}
+	}
+}
+
+/* Program resources in newly inserted bridge */
+static int acpiphp_configure_bridge (acpi_handle handle)
+{
+	struct acpi_pci_id pci_id;
+	struct pci_bus *bus;
+
+	if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
+		err("cannot get PCI domain and bus number for bridge\n");
+		return -EINVAL;
+	}
+	bus = pci_find_bus(pci_id.segment, pci_id.bus);
+	if (!bus) {
+		err("cannot find bus %d:%d\n",
+				pci_id.segment, pci_id.bus);
+		return -EINVAL;
+	}
+
+	pci_bus_size_bridges(bus);
+	pci_bus_assign_resources(bus);
+	acpiphp_sanitize_bus(bus);
+	acpiphp_set_hpp_values(handle, bus);
+	pci_enable_bridges(bus);
+	acpiphp_configure_ioapics(handle);
+	return 0;
+}
+
+static void handle_bridge_insertion(acpi_handle handle, u32 type)
+{
+	struct acpi_device *device, *pdevice;
+	acpi_handle phandle;
+
+	if ((type != ACPI_NOTIFY_BUS_CHECK) &&
+			(type != ACPI_NOTIFY_DEVICE_CHECK)) {
+		err("unexpected notification type %d\n", type);
+		return;
+	}
+
+	acpi_get_parent(handle, &phandle);
+	if (acpi_bus_get_device(phandle, &pdevice)) {
+		dbg("no parent device, assuming NULL\n");
+		pdevice = NULL;
+	}
+	if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) {
+		err("cannot add bridge to acpi list\n");
+		return;
+	}
+	if (!acpiphp_configure_bridge(handle) &&
+		!acpi_bus_start(device))
+		add_bridge(handle);
+	else
+		err("cannot configure and start bridge\n");
+
+}
+
 /*
  * ACPI event handlers
  */
@@ -982,8 +1120,19 @@
 	char objname[64];
 	struct acpi_buffer buffer = { .length = sizeof(objname),
 				      .pointer = objname };
+	struct acpi_device *device;
 
-	bridge = (struct acpiphp_bridge *)context;
+	if (acpi_bus_get_device(handle, &device)) {
+		/* This bridge must have just been physically inserted */
+		handle_bridge_insertion(handle, type);
+		return;
+	}
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (!bridge) {
+		err("cannot get bridge info\n");
+		return;
+	}
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 
@@ -1031,7 +1180,6 @@
 	}
 }
 
-
 /**
  * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
  *
@@ -1074,7 +1222,8 @@
 	case ACPI_NOTIFY_EJECT_REQUEST:
 		/* request device eject */
 		dbg("%s: Device eject notify on %s\n", __FUNCTION__, objname);
-		acpiphp_disable_slot(func->slot);
+		if (!(acpiphp_disable_slot(func->slot)))
+			acpiphp_eject_slot(func->slot);
 		break;
 
 	default:
@@ -1083,6 +1232,47 @@
 	}
 }
 
+static int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+static acpi_status
+find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	int *count = (int *)context;
+
+	if (is_root_bridge(handle)) {
+		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+				handle_hotplug_event_bridge, NULL);
+			(*count)++;
+	}
+	return AE_OK ;
+}
 
 static struct acpi_pci_driver acpi_pci_hp_driver = {
 	.add =		add_bridge,
@@ -1095,15 +1285,15 @@
  */
 int __init acpiphp_glue_init(void)
 {
-	int num;
+	int num = 0;
 
-	if (list_empty(&pci_root_buses))
-		return -1;
-
-	num = acpi_pci_register_driver(&acpi_pci_hp_driver);
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+			ACPI_UINT32_MAX, find_root_bridges, &num, NULL);
 
 	if (num <= 0)
 		return -1;
+	else
+		acpi_pci_register_driver(&acpi_pci_hp_driver);
 
 	return 0;
 }
@@ -1116,46 +1306,6 @@
  */
 void __exit acpiphp_glue_exit(void)
 {
-	struct list_head *l1, *l2, *n1, *n2;
-	struct acpiphp_bridge *bridge;
-	struct acpiphp_slot *slot, *next;
-	struct acpiphp_func *func;
-	acpi_status status;
-
-	list_for_each_safe (l1, n1, &bridge_list) {
-		bridge = (struct acpiphp_bridge *)l1;
-		slot = bridge->slots;
-		while (slot) {
-			next = slot->next;
-			list_for_each_safe (l2, n2, &slot->funcs) {
-				func = list_entry(l2, struct acpiphp_func, sibling);
-				acpiphp_free_resource(&func->io_head);
-				acpiphp_free_resource(&func->mem_head);
-				acpiphp_free_resource(&func->p_mem_head);
-				acpiphp_free_resource(&func->bus_head);
-				status = acpi_remove_notify_handler(func->handle,
-								    ACPI_SYSTEM_NOTIFY,
-								    handle_hotplug_event_func);
-				if (ACPI_FAILURE(status))
-					err("failed to remove notify handler\n");
-				kfree(func);
-			}
-			kfree(slot);
-			slot = next;
-		}
-		status = acpi_remove_notify_handler(bridge->handle, ACPI_SYSTEM_NOTIFY,
-						    handle_hotplug_event_bridge);
-		if (ACPI_FAILURE(status))
-			err("failed to remove notify handler\n");
-
-		acpiphp_free_resource(&bridge->io_head);
-		acpiphp_free_resource(&bridge->mem_head);
-		acpiphp_free_resource(&bridge->p_mem_head);
-		acpiphp_free_resource(&bridge->bus_head);
-
-		kfree(bridge);
-	}
-
 	acpi_pci_unregister_driver(&acpi_pci_hp_driver);
 }
 
@@ -1173,11 +1323,14 @@
 
 	list_for_each (node, &bridge_list) {
 		bridge = (struct acpiphp_bridge *)node;
-		dbg("Bus%d %dslot(s)\n", bridge->bus, bridge->nr_slots);
+		dbg("Bus %04x:%02x has %d slot%s\n",
+				pci_domain_nr(bridge->pci_bus),
+				bridge->pci_bus->number, bridge->nr_slots,
+				bridge->nr_slots == 1 ? "" : "s");
 		num_slots += bridge->nr_slots;
 	}
 
-	dbg("Total %dslots\n", num_slots);
+	dbg("Total %d slots\n", num_slots);
 	return num_slots;
 }
 
@@ -1254,7 +1407,6 @@
 	return retval;
 }
 
-
 /**
  * acpiphp_disable_slot - power off slot
  */
@@ -1274,13 +1426,6 @@
 	if (retval)
 		goto err_exit;
 
-	acpiphp_resource_sort_and_combine(&slot->bridge->io_head);
-	acpiphp_resource_sort_and_combine(&slot->bridge->mem_head);
-	acpiphp_resource_sort_and_combine(&slot->bridge->p_mem_head);
-	acpiphp_resource_sort_and_combine(&slot->bridge->bus_head);
-	dbg("Available resources:\n");
-	acpiphp_dump_resource(slot->bridge);
-
  err_exit:
 	up(&slot->crit_sect);
 	return retval;
@@ -1293,11 +1438,7 @@
  */
 u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
 {
-	unsigned int sta;
-
-	sta = get_slot_status(slot);
-
-	return (sta & ACPI_STA_ENABLED) ? 1 : 0;
+	return (slot->flags & SLOT_POWEREDON);
 }
 
 
@@ -1335,9 +1476,10 @@
 u32 acpiphp_get_address(struct acpiphp_slot *slot)
 {
 	u32 address;
+	struct pci_bus *pci_bus = slot->bridge->pci_bus;
 
-	address = ((slot->bridge->seg) << 16) |
-		  ((slot->bridge->bus) << 8) |
+	address = (pci_domain_nr(pci_bus) << 16) |
+		  (pci_bus->number << 8) |
 		  slot->device;
 
 	return address;
diff --git a/drivers/pci/hotplug/acpiphp_pci.c b/drivers/pci/hotplug/acpiphp_pci.c
deleted file mode 100644
index 54d97c9..0000000
--- a/drivers/pci/hotplug/acpiphp_pci.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * ACPI PCI HotPlug PCI configuration space management
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001,2002 IBM Corp.
- * Copyright (C) 2002 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
- * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
- * Copyright (C) 2002 NEC Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <t-kochi@bq.jp.nec.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include "../pci.h"
-#include "pci_hotplug.h"
-#include "acpiphp.h"
-
-#define MY_NAME "acpiphp_pci"
-
-
-/* allocate mem/pmem/io resource to a new function */
-static int init_config_space (struct acpiphp_func *func)
-{
-	u32 bar, len;
-	u32 address[] = {
-		PCI_BASE_ADDRESS_0,
-		PCI_BASE_ADDRESS_1,
-		PCI_BASE_ADDRESS_2,
-		PCI_BASE_ADDRESS_3,
-		PCI_BASE_ADDRESS_4,
-		PCI_BASE_ADDRESS_5,
-		0
-	};
-	int count;
-	struct acpiphp_bridge *bridge;
-	struct pci_resource *res;
-	struct pci_bus *pbus;
-	int bus, device, function;
-	unsigned int devfn;
-	u16 tmp;
-
-	bridge = func->slot->bridge;
-	pbus = bridge->pci_bus;
-	bus = bridge->bus;
-	device = func->slot->device;
-	function = func->function;
-	devfn = PCI_DEVFN(device, function);
-
-	for (count = 0; address[count]; count++) {	/* for 6 BARs */
-		pci_bus_write_config_dword(pbus, devfn,
-					   address[count], 0xFFFFFFFF);
-		pci_bus_read_config_dword(pbus, devfn, address[count], &bar);
-
-		if (!bar)	/* This BAR is not implemented */
-			continue;
-
-		dbg("Device %02x.%02x BAR %d wants %x\n", device, function, count, bar);
-
-		if (bar & PCI_BASE_ADDRESS_SPACE_IO) {
-			/* This is IO */
-
-			len = bar & (PCI_BASE_ADDRESS_IO_MASK & 0xFFFF);
-			len = len & ~(len - 1);
-
-			dbg("len in IO %x, BAR %d\n", len, count);
-
-			spin_lock(&bridge->res_lock);
-			res = acpiphp_get_io_resource(&bridge->io_head, len);
-			spin_unlock(&bridge->res_lock);
-
-			if (!res) {
-				err("cannot allocate requested io for %02x:%02x.%d len %x\n",
-				    bus, device, function, len);
-				return -1;
-			}
-			pci_bus_write_config_dword(pbus, devfn,
-						   address[count],
-						   (u32)res->base);
-			res->next = func->io_head;
-			func->io_head = res;
-
-		} else {
-			/* This is Memory */
-			if (bar & PCI_BASE_ADDRESS_MEM_PREFETCH) {
-				/* pfmem */
-
-				len = bar & 0xFFFFFFF0;
-				len = ~len + 1;
-
-				dbg("len in PFMEM %x, BAR %d\n", len, count);
-
-				spin_lock(&bridge->res_lock);
-				res = acpiphp_get_resource(&bridge->p_mem_head, len);
-				spin_unlock(&bridge->res_lock);
-
-				if (!res) {
-					err("cannot allocate requested pfmem for %02x:%02x.%d len %x\n",
-					    bus, device, function, len);
-					return -1;
-				}
-
-				pci_bus_write_config_dword(pbus, devfn,
-							   address[count],
-							   (u32)res->base);
-
-				if (bar & PCI_BASE_ADDRESS_MEM_TYPE_64) {	/* takes up another dword */
-					dbg("inside the pfmem 64 case, count %d\n", count);
-					count += 1;
-					pci_bus_write_config_dword(pbus, devfn,
-								   address[count],
-								   (u32)(res->base >> 32));
-				}
-
-				res->next = func->p_mem_head;
-				func->p_mem_head = res;
-
-			} else {
-				/* regular memory */
-
-				len = bar & 0xFFFFFFF0;
-				len = ~len + 1;
-
-				dbg("len in MEM %x, BAR %d\n", len, count);
-
-				spin_lock(&bridge->res_lock);
-				res = acpiphp_get_resource(&bridge->mem_head, len);
-				spin_unlock(&bridge->res_lock);
-
-				if (!res) {
-					err("cannot allocate requested pfmem for %02x:%02x.%d len %x\n",
-					    bus, device, function, len);
-					return -1;
-				}
-
-				pci_bus_write_config_dword(pbus, devfn,
-							   address[count],
-							   (u32)res->base);
-
-				if (bar & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-					/* takes up another dword */
-					dbg("inside mem 64 case, reg. mem, count %d\n", count);
-					count += 1;
-					pci_bus_write_config_dword(pbus, devfn,
-								   address[count],
-								   (u32)(res->base >> 32));
-				}
-
-				res->next = func->mem_head;
-				func->mem_head = res;
-
-			}
-		}
-	}
-
-	/* disable expansion rom */
-	pci_bus_write_config_dword(pbus, devfn, PCI_ROM_ADDRESS, 0x00000000);
-
-	/* set PCI parameters from _HPP */
-	pci_bus_write_config_byte(pbus, devfn, PCI_CACHE_LINE_SIZE,
-				  bridge->hpp.cache_line_size);
-	pci_bus_write_config_byte(pbus, devfn, PCI_LATENCY_TIMER,
-				  bridge->hpp.latency_timer);
-
-	pci_bus_read_config_word(pbus, devfn, PCI_COMMAND, &tmp);
-	if (bridge->hpp.enable_SERR)
-		tmp |= PCI_COMMAND_SERR;
-	if (bridge->hpp.enable_PERR)
-		tmp |= PCI_COMMAND_PARITY;
-	pci_bus_write_config_word(pbus, devfn, PCI_COMMAND, tmp);
-
-	return 0;
-}
-
-/* detect_used_resource - subtract resource under dev from bridge */
-static int detect_used_resource (struct acpiphp_bridge *bridge, struct pci_dev *dev)
-{
-	int count;
-
-	dbg("Device %s\n", pci_name(dev));
-
-	for (count = 0; count < DEVICE_COUNT_RESOURCE; count++) {
-		struct pci_resource *res;
-		struct pci_resource **head;
-		unsigned long base = dev->resource[count].start;
-		unsigned long len = dev->resource[count].end - base + 1;
-		unsigned long flags = dev->resource[count].flags;
-
-		if (!flags)
-			continue;
-
-		dbg("BAR[%d] 0x%lx - 0x%lx (0x%lx)\n", count, base,
-				base + len - 1, flags);
-
-		if (flags & IORESOURCE_IO) {
-			head = &bridge->io_head;
-		} else if (flags & IORESOURCE_PREFETCH) {
-			head = &bridge->p_mem_head;
-		} else {
-			head = &bridge->mem_head;
-		}
-
-		spin_lock(&bridge->res_lock);
-		res = acpiphp_get_resource_with_base(head, base, len);
-		spin_unlock(&bridge->res_lock);
-		if (res)
-			kfree(res);
-	}
-
-	return 0;
-}
-
-
-/**
- * acpiphp_detect_pci_resource - detect resources under bridge
- * @bridge: detect all resources already used under this bridge
- *
- * collect all resources already allocated for all devices under a bridge.
- */
-int acpiphp_detect_pci_resource (struct acpiphp_bridge *bridge)
-{
-	struct list_head *l;
-	struct pci_dev *dev;
-
-	list_for_each (l, &bridge->pci_bus->devices) {
-		dev = pci_dev_b(l);
-		detect_used_resource(bridge, dev);
-	}
-
-	return 0;
-}
-
-
-/**
- * acpiphp_init_slot_resource - gather resource usage information of a slot
- * @slot: ACPI slot object to be checked, should have valid pci_dev member
- *
- * TBD: PCI-to-PCI bridge case
- *      use pci_dev->resource[]
- */
-int acpiphp_init_func_resource (struct acpiphp_func *func)
-{
-	u64 base;
-	u32 bar, len;
-	u32 address[] = {
-		PCI_BASE_ADDRESS_0,
-		PCI_BASE_ADDRESS_1,
-		PCI_BASE_ADDRESS_2,
-		PCI_BASE_ADDRESS_3,
-		PCI_BASE_ADDRESS_4,
-		PCI_BASE_ADDRESS_5,
-		0
-	};
-	int count;
-	struct pci_resource *res;
-	struct pci_dev *dev;
-
-	dev = func->pci_dev;
-	dbg("Hot-pluggable device %s\n", pci_name(dev));
-
-	for (count = 0; address[count]; count++) {	/* for 6 BARs */
-		pci_read_config_dword(dev, address[count], &bar);
-
-		if (!bar)	/* This BAR is not implemented */
-			continue;
-
-		pci_write_config_dword(dev, address[count], 0xFFFFFFFF);
-		pci_read_config_dword(dev, address[count], &len);
-
-		if (len & PCI_BASE_ADDRESS_SPACE_IO) {
-			/* This is IO */
-			base = bar & 0xFFFFFFFC;
-			len = len & (PCI_BASE_ADDRESS_IO_MASK & 0xFFFF);
-			len = len & ~(len - 1);
-
-			dbg("BAR[%d] %08x - %08x (IO)\n", count, (u32)base, (u32)base + len - 1);
-
-			res = acpiphp_make_resource(base, len);
-			if (!res)
-				goto no_memory;
-
-			res->next = func->io_head;
-			func->io_head = res;
-
-		} else {
-			/* This is Memory */
-			base = bar & 0xFFFFFFF0;
-			if (len & PCI_BASE_ADDRESS_MEM_PREFETCH) {
-				/* pfmem */
-
-				len &= 0xFFFFFFF0;
-				len = ~len + 1;
-
-				if (len & PCI_BASE_ADDRESS_MEM_TYPE_64) {	/* takes up another dword */
-					dbg("prefetch mem 64\n");
-					count += 1;
-				}
-				dbg("BAR[%d] %08x - %08x (PMEM)\n", count, (u32)base, (u32)base + len - 1);
-				res = acpiphp_make_resource(base, len);
-				if (!res)
-					goto no_memory;
-
-				res->next = func->p_mem_head;
-				func->p_mem_head = res;
-
-			} else {
-				/* regular memory */
-
-				len &= 0xFFFFFFF0;
-				len = ~len + 1;
-
-				if (len & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-					/* takes up another dword */
-					dbg("mem 64\n");
-					count += 1;
-				}
-				dbg("BAR[%d] %08x - %08x (MEM)\n", count, (u32)base, (u32)base + len - 1);
-				res = acpiphp_make_resource(base, len);
-				if (!res)
-					goto no_memory;
-
-				res->next = func->mem_head;
-				func->mem_head = res;
-
-			}
-		}
-
-		pci_write_config_dword(dev, address[count], bar);
-	}
-#if 1
-	acpiphp_dump_func_resource(func);
-#endif
-
-	return 0;
-
- no_memory:
-	err("out of memory\n");
-	acpiphp_free_resource(&func->io_head);
-	acpiphp_free_resource(&func->mem_head);
-	acpiphp_free_resource(&func->p_mem_head);
-
-	return -1;
-}
-
-
-/**
- * acpiphp_configure_slot - allocate PCI resources
- * @slot: slot to be configured
- *
- * initializes a PCI functions on a device inserted
- * into the slot
- *
- */
-int acpiphp_configure_slot (struct acpiphp_slot *slot)
-{
-	struct acpiphp_func *func;
-	struct list_head *l;
-	u8 hdr;
-	u32 dvid;
-	int retval = 0;
-	int is_multi = 0;
-
-	pci_bus_read_config_byte(slot->bridge->pci_bus,
-				 PCI_DEVFN(slot->device, 0),
-				 PCI_HEADER_TYPE, &hdr);
-
-	if (hdr & 0x80)
-		is_multi = 1;
-
-	list_for_each (l, &slot->funcs) {
-		func = list_entry(l, struct acpiphp_func, sibling);
-		if (is_multi || func->function == 0) {
-			pci_bus_read_config_dword(slot->bridge->pci_bus,
-						  PCI_DEVFN(slot->device,
-							    func->function),
-						  PCI_VENDOR_ID, &dvid);
-			if (dvid != 0xffffffff) {
-				retval = init_config_space(func);
-				if (retval)
-					break;
-			}
-		}
-	}
-
-	return retval;
-}
-
-/**
- * acpiphp_configure_function - configure PCI function
- * @func: function to be configured
- *
- * initializes a PCI functions on a device inserted
- * into the slot
- *
- */
-int acpiphp_configure_function (struct acpiphp_func *func)
-{
-	/* all handled by the pci core now */
-	return 0;
-}
-
-/**
- * acpiphp_unconfigure_function - unconfigure PCI function
- * @func: function to be unconfigured
- *
- */
-void acpiphp_unconfigure_function (struct acpiphp_func *func)
-{
-	struct acpiphp_bridge *bridge;
-
-	/* if pci_dev is NULL, ignore it */
-	if (!func->pci_dev)
-		return;
-
-	pci_remove_bus_device(func->pci_dev);
-
-	/* free all resources */
-	bridge = func->slot->bridge;
-
-	spin_lock(&bridge->res_lock);
-	acpiphp_move_resource(&func->io_head, &bridge->io_head);
-	acpiphp_move_resource(&func->mem_head, &bridge->mem_head);
-	acpiphp_move_resource(&func->p_mem_head, &bridge->p_mem_head);
-	acpiphp_move_resource(&func->bus_head, &bridge->bus_head);
-	spin_unlock(&bridge->res_lock);
-}
diff --git a/drivers/pci/hotplug/acpiphp_res.c b/drivers/pci/hotplug/acpiphp_res.c
deleted file mode 100644
index f54b1fa..0000000
--- a/drivers/pci/hotplug/acpiphp_res.c
+++ /dev/null
@@ -1,700 +0,0 @@
-/*
- * ACPI PCI HotPlug Utility functions
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
- * Copyright (C) 2002 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
- * Copyright (C) 2002 NEC Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gregkh@us.ibm.com>, <t-kochi@bq.jp.nec.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/sysctl.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-
-#include <linux/ioctl.h>
-#include <linux/fcntl.h>
-
-#include <linux/list.h>
-
-#include "pci_hotplug.h"
-#include "acpiphp.h"
-
-#define MY_NAME "acpiphp_res"
-
-
-/*
- * sort_by_size - sort nodes by their length, smallest first
- */
-static int sort_by_size(struct pci_resource **head)
-{
-	struct pci_resource *current_res;
-	struct pci_resource *next_res;
-	int out_of_order = 1;
-
-	if (!(*head))
-		return 1;
-
-	if (!((*head)->next))
-		return 0;
-
-	while (out_of_order) {
-		out_of_order = 0;
-
-		/* Special case for swapping list head */
-		if (((*head)->next) &&
-		    ((*head)->length > (*head)->next->length)) {
-			out_of_order++;
-			current_res = *head;
-			*head = (*head)->next;
-			current_res->next = (*head)->next;
-			(*head)->next = current_res;
-		}
-
-		current_res = *head;
-
-		while (current_res->next && current_res->next->next) {
-			if (current_res->next->length > current_res->next->next->length) {
-				out_of_order++;
-				next_res = current_res->next;
-				current_res->next = current_res->next->next;
-				current_res = current_res->next;
-				next_res->next = current_res->next;
-				current_res->next = next_res;
-			} else
-				current_res = current_res->next;
-		}
-	}  /* End of out_of_order loop */
-
-	return 0;
-}
-
-#if 0
-/*
- * sort_by_max_size - sort nodes by their length, largest first
- */
-static int sort_by_max_size(struct pci_resource **head)
-{
-	struct pci_resource *current_res;
-	struct pci_resource *next_res;
-	int out_of_order = 1;
-
-	if (!(*head))
-		return 1;
-
-	if (!((*head)->next))
-		return 0;
-
-	while (out_of_order) {
-		out_of_order = 0;
-
-		/* Special case for swapping list head */
-		if (((*head)->next) &&
-		    ((*head)->length < (*head)->next->length)) {
-			out_of_order++;
-			current_res = *head;
-			*head = (*head)->next;
-			current_res->next = (*head)->next;
-			(*head)->next = current_res;
-		}
-
-		current_res = *head;
-
-		while (current_res->next && current_res->next->next) {
-			if (current_res->next->length < current_res->next->next->length) {
-				out_of_order++;
-				next_res = current_res->next;
-				current_res->next = current_res->next->next;
-				current_res = current_res->next;
-				next_res->next = current_res->next;
-				current_res->next = next_res;
-			} else
-				current_res = current_res->next;
-		}
-	}  /* End of out_of_order loop */
-
-	return 0;
-}
-#endif
-
-/**
- * get_io_resource - get resource for I/O ports
- *
- * this function sorts the resource list by size and then
- * returns the first node of "size" length that is not in the
- * ISA aliasing window.  If it finds a node larger than "size"
- * it will split it up.
- *
- * size must be a power of two.
- *
- * difference from get_resource is handling of ISA aliasing space.
- *
- */
-struct pci_resource *acpiphp_get_io_resource (struct pci_resource **head, u32 size)
-{
-	struct pci_resource *prevnode;
-	struct pci_resource *node;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	if (sort_by_size(head))
-		return NULL;
-
-	for (node = *head; node; node = node->next) {
-		if (node->length < size)
-			continue;
-
-		if (node->base & (size - 1)) {
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = (node->base | (size-1)) + 1;
-
-			/* Short circuit if adjusted size is too small */
-			if ((node->length - (temp_qword - node->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(node->base, temp_qword - node->base);
-
-			if (!split_node)
-				return NULL;
-
-			node->base = temp_qword;
-			node->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		} /* End of non-aligned base */
-
-		/* Don't need to check if too small since we already did */
-		if (node->length > size) {
-			/* this one is longer than we need
-			   so we'll make a new entry and split it up */
-			split_node = acpiphp_make_resource(node->base + size, node->length - size);
-
-			if (!split_node)
-				return NULL;
-
-			node->length = size;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}  /* End of too big on top end */
-
-		/* For IO make sure it's not in the ISA aliasing space */
-		if ((node->base & 0x300L) && !(node->base & 0xfffff000))
-			continue;
-
-		/* If we got here, then it is the right size
-		   Now take it out of the list */
-		if (*head == node) {
-			*head = node->next;
-		} else {
-			prevnode = *head;
-			while (prevnode->next != node)
-				prevnode = prevnode->next;
-
-			prevnode->next = node->next;
-		}
-		node->next = NULL;
-		/* Stop looping */
-		break;
-	}
-
-	return node;
-}
-
-
-#if 0
-/**
- * get_max_resource - get the largest resource
- *
- * Gets the largest node that is at least "size" big from the
- * list pointed to by head.  It aligns the node on top and bottom
- * to "size" alignment before returning it.
- */
-static struct pci_resource *acpiphp_get_max_resource (struct pci_resource **head, u32 size)
-{
-	struct pci_resource *max;
-	struct pci_resource *temp;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	if (sort_by_max_size(head))
-		return NULL;
-
-	for (max = *head;max; max = max->next) {
-
-		/* If not big enough we could probably just bail,
-		   instead we'll continue to the next. */
-		if (max->length < size)
-			continue;
-
-		if (max->base & (size - 1)) {
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = (max->base | (size-1)) + 1;
-
-			/* Short circuit if adjusted size is too small */
-			if ((max->length - (temp_qword - max->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(max->base, temp_qword - max->base);
-
-			if (!split_node)
-				return NULL;
-
-			max->base = temp_qword;
-			max->length -= split_node->length;
-
-			/* Put it next in the list */
-			split_node->next = max->next;
-			max->next = split_node;
-		}
-
-		if ((max->base + max->length) & (size - 1)) {
-			/* this one isn't end aligned properly at the top
-			   so we'll make a new entry and split it up */
-			temp_qword = ((max->base + max->length) & ~(size - 1));
-
-			split_node = acpiphp_make_resource(temp_qword,
-							   max->length + max->base - temp_qword);
-
-			if (!split_node)
-				return NULL;
-
-			max->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = max->next;
-			max->next = split_node;
-		}
-
-		/* Make sure it didn't shrink too much when we aligned it */
-		if (max->length < size)
-			continue;
-
-		/* Now take it out of the list */
-		temp = (struct pci_resource*) *head;
-		if (temp == max) {
-			*head = max->next;
-		} else {
-			while (temp && temp->next != max) {
-				temp = temp->next;
-			}
-
-			temp->next = max->next;
-		}
-
-		max->next = NULL;
-		return max;
-	}
-
-	/* If we get here, we couldn't find one */
-	return NULL;
-}
-#endif
-
-/**
- * get_resource - get resource (mem, pfmem)
- *
- * this function sorts the resource list by size and then
- * returns the first node of "size" length.  If it finds a node
- * larger than "size" it will split it up.
- *
- * size must be a power of two.
- *
- */
-struct pci_resource *acpiphp_get_resource (struct pci_resource **head, u32 size)
-{
-	struct pci_resource *prevnode;
-	struct pci_resource *node;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	if (sort_by_size(head))
-		return NULL;
-
-	for (node = *head; node; node = node->next) {
-		dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
-		    __FUNCTION__, size, node, (u32)node->base, node->length);
-		if (node->length < size)
-			continue;
-
-		if (node->base & (size - 1)) {
-			dbg("%s: not aligned\n", __FUNCTION__);
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = (node->base | (size-1)) + 1;
-
-			/* Short circuit if adjusted size is too small */
-			if ((node->length - (temp_qword - node->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(node->base, temp_qword - node->base);
-
-			if (!split_node)
-				return NULL;
-
-			node->base = temp_qword;
-			node->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		} /* End of non-aligned base */
-
-		/* Don't need to check if too small since we already did */
-		if (node->length > size) {
-			dbg("%s: too big\n", __FUNCTION__);
-			/* this one is longer than we need
-			   so we'll make a new entry and split it up */
-			split_node = acpiphp_make_resource(node->base + size, node->length - size);
-
-			if (!split_node)
-				return NULL;
-
-			node->length = size;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}  /* End of too big on top end */
-
-		dbg("%s: got one!!!\n", __FUNCTION__);
-		/* If we got here, then it is the right size
-		   Now take it out of the list */
-		if (*head == node) {
-			*head = node->next;
-		} else {
-			prevnode = *head;
-			while (prevnode->next != node)
-				prevnode = prevnode->next;
-
-			prevnode->next = node->next;
-		}
-		node->next = NULL;
-		/* Stop looping */
-		break;
-	}
-	return node;
-}
-
-/**
- * get_resource_with_base - get resource with specific base address
- *
- * this function
- * returns the first node of "size" length located at specified base address.
- * If it finds a node larger than "size" it will split it up.
- *
- * size must be a power of two.
- *
- */
-struct pci_resource *acpiphp_get_resource_with_base (struct pci_resource **head, u64 base, u32 size)
-{
-	struct pci_resource *prevnode;
-	struct pci_resource *node;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	for (node = *head; node; node = node->next) {
-		dbg(": 1st req_base=%x req_size =%x node=%p, base=%x, length=%x\n",
-		    (u32)base, size, node, (u32)node->base, node->length);
-		if (node->base > base)
-			continue;
-
-		if ((node->base + node->length) < (base + size))
-			continue;
-
-		if (node->base < base) {
-			dbg(": split 1\n");
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = base;
-
-			/* Short circuit if adjusted size is too small */
-			if ((node->length - (temp_qword - node->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(node->base, temp_qword - node->base);
-
-			if (!split_node)
-				return NULL;
-
-			node->base = temp_qword;
-			node->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}
-
-		dbg(": 2nd req_base=%x req_size =%x node=%p, base=%x, length=%x\n",
-		    (u32)base, size, node, (u32)node->base, node->length);
-
-		/* Don't need to check if too small since we already did */
-		if (node->length > size) {
-			dbg(": split 2\n");
-			/* this one is longer than we need
-			   so we'll make a new entry and split it up */
-			split_node = acpiphp_make_resource(node->base + size, node->length - size);
-
-			if (!split_node)
-				return NULL;
-
-			node->length = size;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}  /* End of too big on top end */
-
-		dbg(": got one!!!\n");
-		/* If we got here, then it is the right size
-		   Now take it out of the list */
-		if (*head == node) {
-			*head = node->next;
-		} else {
-			prevnode = *head;
-			while (prevnode->next != node)
-				prevnode = prevnode->next;
-
-			prevnode->next = node->next;
-		}
-		node->next = NULL;
-		/* Stop looping */
-		break;
-	}
-	return node;
-}
-
-
-/**
- * acpiphp_resource_sort_and_combine
- *
- * Sorts all of the nodes in the list in ascending order by
- * their base addresses.  Also does garbage collection by
- * combining adjacent nodes.
- *
- * returns 0 if success
- */
-int acpiphp_resource_sort_and_combine (struct pci_resource **head)
-{
-	struct pci_resource *node1;
-	struct pci_resource *node2;
-	int out_of_order = 1;
-
-	if (!(*head))
-		return 1;
-
-	dbg("*head->next = %p\n",(*head)->next);
-
-	if (!(*head)->next)
-		return 0;	/* only one item on the list, already sorted! */
-
-	dbg("*head->base = 0x%x\n",(u32)(*head)->base);
-	dbg("*head->next->base = 0x%x\n", (u32)(*head)->next->base);
-	while (out_of_order) {
-		out_of_order = 0;
-
-		/* Special case for swapping list head */
-		if (((*head)->next) &&
-		    ((*head)->base > (*head)->next->base)) {
-			node1 = *head;
-			(*head) = (*head)->next;
-			node1->next = (*head)->next;
-			(*head)->next = node1;
-			out_of_order++;
-		}
-
-		node1 = (*head);
-
-		while (node1->next && node1->next->next) {
-			if (node1->next->base > node1->next->next->base) {
-				out_of_order++;
-				node2 = node1->next;
-				node1->next = node1->next->next;
-				node1 = node1->next;
-				node2->next = node1->next;
-				node1->next = node2;
-			} else
-				node1 = node1->next;
-		}
-	}  /* End of out_of_order loop */
-
-	node1 = *head;
-
-	while (node1 && node1->next) {
-		if ((node1->base + node1->length) == node1->next->base) {
-			/* Combine */
-			dbg("8..\n");
-			node1->length += node1->next->length;
-			node2 = node1->next;
-			node1->next = node1->next->next;
-			kfree(node2);
-		} else
-			node1 = node1->next;
-	}
-
-	return 0;
-}
-
-
-/**
- * acpiphp_make_resource - make resource structure
- * @base: base address of a resource
- * @length: length of a resource
- */
-struct pci_resource *acpiphp_make_resource (u64 base, u32 length)
-{
-	struct pci_resource *res;
-
-	res = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
-	if (res) {
-		memset(res, 0, sizeof(struct pci_resource));
-		res->base = base;
-		res->length = length;
-	}
-
-	return res;
-}
-
-
-/**
- * acpiphp_move_resource - move linked resources from one to another
- * @from: head of linked resource list
- * @to: head of linked resource list
- */
-void acpiphp_move_resource (struct pci_resource **from, struct pci_resource **to)
-{
-	struct pci_resource *tmp;
-
-	while (*from) {
-		tmp = (*from)->next;
-		(*from)->next = *to;
-		*to = *from;
-		*from = tmp;
-	}
-
-	/* *from = NULL is guaranteed */
-}
-
-
-/**
- * acpiphp_free_resource - free all linked resources
- * @res: head of linked resource list
- */
-void acpiphp_free_resource (struct pci_resource **res)
-{
-	struct pci_resource *tmp;
-
-	while (*res) {
-		tmp = (*res)->next;
-		kfree(*res);
-		*res = tmp;
-	}
-
-	/* *res = NULL is guaranteed */
-}
-
-
-/* debug support functions;  will go away sometime :) */
-static void dump_resource(struct pci_resource *head)
-{
-	struct pci_resource *p;
-	int cnt;
-
-	p = head;
-	cnt = 0;
-
-	while (p) {
-		dbg("[%02d] %08x - %08x\n",
-		    cnt++, (u32)p->base, (u32)p->base + p->length - 1);
-		p = p->next;
-	}
-}
-
-void acpiphp_dump_resource(struct acpiphp_bridge *bridge)
-{
-	dbg("I/O resource:\n");
-	dump_resource(bridge->io_head);
-	dbg("MEM resource:\n");
-	dump_resource(bridge->mem_head);
-	dbg("PMEM resource:\n");
-	dump_resource(bridge->p_mem_head);
-	dbg("BUS resource:\n");
-	dump_resource(bridge->bus_head);
-}
-
-void acpiphp_dump_func_resource(struct acpiphp_func *func)
-{
-	dbg("I/O resource:\n");
-	dump_resource(func->io_head);
-	dbg("MEM resource:\n");
-	dump_resource(func->mem_head);
-	dbg("PMEM resource:\n");
-	dump_resource(func->p_mem_head);
-	dbg("BUS resource:\n");
-	dump_resource(func->bus_head);
-}
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index afbccfa..8c6d398 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -60,6 +60,7 @@
 static void __iomem *cpqhp_rom_start;
 static int power_mode;
 static int debug;
+static int initialized;
 
 #define DRIVER_VERSION	"0.9.8"
 #define DRIVER_AUTHOR	"Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
@@ -1271,7 +1272,6 @@
 {
 	int loop;
 	int retval = 0;
-	static int initialized = 0;
 
 	if (initialized)
 		return 0;
@@ -1441,7 +1441,8 @@
 	}
 
 	// Stop the notification mechanism
-	cpqhp_event_stop_thread();
+	if (initialized)
+		cpqhp_event_stop_thread();
 
 	//unmap the rom address
 	if (cpqhp_rom_start)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 30206ac..b5ab9aa6 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -28,10 +28,10 @@
 static kmem_cache_t* msi_cachep;
 
 static int pci_msi_enable = 1;
-static int last_alloc_vector = 0;
-static int nr_released_vectors = 0;
+static int last_alloc_vector;
+static int nr_released_vectors;
 static int nr_reserved_vectors = NR_HP_RESERVED_VECTORS;
-static int nr_msix_devices = 0;
+static int nr_msix_devices;
 
 #ifndef CONFIG_X86_IO_APIC
 int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
@@ -170,44 +170,30 @@
 	return 0;	/* never anything pending */
 }
 
-static void release_msi(unsigned int vector);
-static void shutdown_msi_irq(unsigned int vector)
-{
-	release_msi(vector);
-}
-
-#define shutdown_msi_irq_wo_maskbit	shutdown_msi_irq
-static void enable_msi_irq_wo_maskbit(unsigned int vector) {}
-static void disable_msi_irq_wo_maskbit(unsigned int vector) {}
-static void ack_msi_irq_wo_maskbit(unsigned int vector) {}
-static void end_msi_irq_wo_maskbit(unsigned int vector)
-{
-	move_msi(vector);
-	ack_APIC_irq();
-}
-
 static unsigned int startup_msi_irq_w_maskbit(unsigned int vector)
 {
+	startup_msi_irq_wo_maskbit(vector);
+	unmask_MSI_irq(vector);
+	return 0;	/* never anything pending */
+}
+
+static void shutdown_msi_irq(unsigned int vector)
+{
 	struct msi_desc *entry;
 	unsigned long flags;
 
 	spin_lock_irqsave(&msi_lock, flags);
 	entry = msi_desc[vector];
-	if (!entry || !entry->dev) {
-		spin_unlock_irqrestore(&msi_lock, flags);
-		return 0;
-	}
-	entry->msi_attrib.state = 1;	/* Mark it active */
+	if (entry && entry->dev)
+		entry->msi_attrib.state = 0;	/* Mark it not active */
 	spin_unlock_irqrestore(&msi_lock, flags);
-
-	unmask_MSI_irq(vector);
-	return 0;	/* never anything pending */
 }
 
-#define shutdown_msi_irq_w_maskbit	shutdown_msi_irq
-#define enable_msi_irq_w_maskbit	unmask_MSI_irq
-#define disable_msi_irq_w_maskbit	mask_MSI_irq
-#define ack_msi_irq_w_maskbit		mask_MSI_irq
+static void end_msi_irq_wo_maskbit(unsigned int vector)
+{
+	move_msi(vector);
+	ack_APIC_irq();
+}
 
 static void end_msi_irq_w_maskbit(unsigned int vector)
 {
@@ -216,6 +202,10 @@
 	ack_APIC_irq();
 }
 
+static void do_nothing(unsigned int vector)
+{
+}
+
 /*
  * Interrupt Type for MSI-X PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI-X Capability Structure.
@@ -223,10 +213,10 @@
 static struct hw_interrupt_type msix_irq_type = {
 	.typename	= "PCI-MSI-X",
 	.startup	= startup_msi_irq_w_maskbit,
-	.shutdown	= shutdown_msi_irq_w_maskbit,
-	.enable		= enable_msi_irq_w_maskbit,
-	.disable	= disable_msi_irq_w_maskbit,
-	.ack		= ack_msi_irq_w_maskbit,
+	.shutdown	= shutdown_msi_irq,
+	.enable		= unmask_MSI_irq,
+	.disable	= mask_MSI_irq,
+	.ack		= mask_MSI_irq,
 	.end		= end_msi_irq_w_maskbit,
 	.set_affinity	= set_msi_irq_affinity
 };
@@ -239,10 +229,10 @@
 static struct hw_interrupt_type msi_irq_w_maskbit_type = {
 	.typename	= "PCI-MSI",
 	.startup	= startup_msi_irq_w_maskbit,
-	.shutdown	= shutdown_msi_irq_w_maskbit,
-	.enable		= enable_msi_irq_w_maskbit,
-	.disable	= disable_msi_irq_w_maskbit,
-	.ack		= ack_msi_irq_w_maskbit,
+	.shutdown	= shutdown_msi_irq,
+	.enable		= unmask_MSI_irq,
+	.disable	= mask_MSI_irq,
+	.ack		= mask_MSI_irq,
 	.end		= end_msi_irq_w_maskbit,
 	.set_affinity	= set_msi_irq_affinity
 };
@@ -255,10 +245,10 @@
 static struct hw_interrupt_type msi_irq_wo_maskbit_type = {
 	.typename	= "PCI-MSI",
 	.startup	= startup_msi_irq_wo_maskbit,
-	.shutdown	= shutdown_msi_irq_wo_maskbit,
-	.enable		= enable_msi_irq_wo_maskbit,
-	.disable	= disable_msi_irq_wo_maskbit,
-	.ack		= ack_msi_irq_wo_maskbit,
+	.shutdown	= shutdown_msi_irq,
+	.enable		= do_nothing,
+	.disable	= do_nothing,
+	.ack		= do_nothing,
 	.end		= end_msi_irq_wo_maskbit,
 	.set_affinity	= set_msi_irq_affinity
 };
@@ -407,7 +397,7 @@
 {
 	struct msi_desc *entry;
 
-	entry = (struct msi_desc*) kmem_cache_alloc(msi_cachep, SLAB_KERNEL);
+	entry = kmem_cache_alloc(msi_cachep, SLAB_KERNEL);
 	if (!entry)
 		return NULL;
 
@@ -796,18 +786,6 @@
 	}
 }
 
-static void release_msi(unsigned int vector)
-{
-	struct msi_desc *entry;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msi_lock, flags);
-	entry = msi_desc[vector];
-	if (entry && entry->dev)
-		entry->msi_attrib.state = 0;	/* Mark it not active */
-	spin_unlock_irqrestore(&msi_lock, flags);
-}
-
 static int msi_free_vector(struct pci_dev* dev, int vector, int reassign)
 {
 	struct msi_desc *entry;
@@ -924,7 +902,7 @@
 /**
  * pci_enable_msix - configure device's MSI-X capability structure
  * @dev: pointer to the pci_dev data structure of MSI-X device function
- * @data: pointer to an array of MSI-X entries
+ * @entries: pointer to an array of MSI-X entries
  * @nvec: number of MSI-X vectors requested for allocation by device driver
  *
  * Setup the MSI-X capability structure of device function with the number
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index bef21ae..390f185 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -41,11 +41,11 @@
 #define PCI_MSIX_FLAGS_BIRMASK		(7 << 0)
 #define PCI_MSIX_FLAGS_BITMASK		(1 << 0)
 
-#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
-#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
-#define PCI_MSIX_ENTRY_DATA_OFFSET		8
-#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET	12
 #define PCI_MSIX_ENTRY_SIZE			16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
+#define  PCI_MSIX_ENTRY_DATA_OFFSET		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET	12
 
 #define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
 #define msi_lower_address_reg(base)	(base + PCI_MSI_ADDRESS_LO)
@@ -64,7 +64,6 @@
 #define msi_enable(control, num) multi_msi_enable(control, num); \
 	control |= PCI_MSI_FLAGS_ENABLE
 
-#define msix_control_reg		msi_control_reg
 #define msix_table_offset_reg(base)	(base + 0x04)
 #define msix_pba_offset_reg(base)	(base + 0x08)
 #define msix_enable(control)	 	control |= PCI_MSIX_FLAGS_ENABLE
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a15f940..cc9d653 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -60,15 +60,18 @@
 	char * str = buf;
 	int i;
 	int max = 7;
+	u64 start, end;
 
 	if (pci_dev->subordinate)
 		max = DEVICE_COUNT_RESOURCE;
 
 	for (i = 0; i < max; i++) {
-		str += sprintf(str,"0x%016lx 0x%016lx 0x%016lx\n",
-			       pci_resource_start(pci_dev,i),
-			       pci_resource_end(pci_dev,i),
-			       pci_resource_flags(pci_dev,i));
+		struct resource *res =  &pci_dev->resource[i];
+		pci_resource_to_user(pci_dev, i, res, &start, &end);
+		str += sprintf(str,"0x%016llx 0x%016llx 0x%016llx\n",
+			       (unsigned long long)start,
+			       (unsigned long long)end,
+			       (unsigned long long)res->flags);
 	}
 	return (str - buf);
 }
@@ -313,8 +316,21 @@
 						       struct device, kobj));
 	struct resource *res = (struct resource *)attr->private;
 	enum pci_mmap_state mmap_type;
+	u64 start, end;
+	int i;
 
-	vma->vm_pgoff += res->start >> PAGE_SHIFT;
+	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+		if (res == &pdev->resource[i])
+			break;
+	if (i >= PCI_ROM_RESOURCE)
+		return -ENODEV;
+
+	/* pci_mmap_page_range() expects the same kind of entry as coming
+	 * from /proc/bus/pci/ which is a "user visible" value. If this is
+	 * different from the resource itself, arch will do necessary fixup.
+	 */
+	pci_resource_to_user(pdev, i, res, &start, &end);
+	vma->vm_pgoff += start >> PAGE_SHIFT;
 	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
 
 	return pci_mmap_page_range(pdev, vma, mmap_type, 0);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index fd48b20..6a0a82f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -374,8 +374,11 @@
 	struct pci_bus *child;
 
 	child = pci_alloc_child_bus(parent, dev, busnr);
-	if (child)
+	if (child) {
+		spin_lock(&pci_bus_lock);
 		list_add_tail(&child->node, &parent->children);
+		spin_unlock(&pci_bus_lock);
+	}
 	return child;
 }
 
@@ -411,7 +414,7 @@
 {
 	struct pci_bus *child;
 	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
-	u32 buses;
+	u32 buses, i;
 	u16 bctl;
 
 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
@@ -447,7 +450,7 @@
 			return max;
 		}
 
-		child = pci_alloc_child_bus(bus, dev, busnr);
+		child = pci_add_new_bus(bus, dev, busnr);
 		if (!child)
 			return max;
 		child->primary = buses & 0xFF;
@@ -470,7 +473,11 @@
 		/* Clear errors */
 		pci_write_config_word(dev, PCI_STATUS, 0xffff);
 
-		child = pci_alloc_child_bus(bus, dev, ++max);
+		/* Prevent assigning a bus number that already exists.
+		 * This can happen when a bridge is hot-plugged */
+		if (pci_find_bus(pci_domain_nr(bus), max+1))
+			return max;
+		child = pci_add_new_bus(bus, dev, ++max);
 		buses = (buses & 0xff000000)
 		      | ((unsigned int)(child->primary)     <<  0)
 		      | ((unsigned int)(child->secondary)   <<  8)
@@ -501,7 +508,11 @@
 			 * as cards with a PCI-to-PCI bridge can be
 			 * inserted later.
 			 */
-			max += CARDBUS_RESERVE_BUSNR;
+			for (i=0; i<CARDBUS_RESERVE_BUSNR; i++)
+				if (pci_find_bus(pci_domain_nr(bus),
+							max+i+1))
+					break;
+			max += i;
 		}
 		/*
 		 * Set the subordinate bus number to its real value.
@@ -757,7 +768,9 @@
 	 * and the bus list for fixup functions, etc.
 	 */
 	INIT_LIST_HEAD(&dev->global_list);
+	spin_lock(&pci_bus_lock);
 	list_add_tail(&dev->bus_list, &bus->devices);
+	spin_unlock(&pci_bus_lock);
 
 	return dev;
 }
@@ -878,7 +891,9 @@
 		pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
 		goto err_out;
 	}
+	spin_lock(&pci_bus_lock);
 	list_add_tail(&b->node, &pci_root_buses);
+	spin_unlock(&pci_bus_lock);
 
 	memset(dev, 0, sizeof(*dev));
 	dev->parent = parent;
@@ -911,8 +926,6 @@
 
 	b->subordinate = pci_scan_child_bus(b);
 
-	pci_bus_add_devices(b);
-
 	return b;
 
 sys_create_link_err:
@@ -922,7 +935,9 @@
 class_dev_reg_err:
 	device_unregister(dev);
 dev_reg_err:
+	spin_lock(&pci_bus_lock);
 	list_del(&b->node);
+	spin_unlock(&pci_bus_lock);
 err_out:
 	kfree(dev);
 	kfree(b);
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index e68bbfb..7988fc8 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -355,14 +355,20 @@
 			dev->device,
 			dev->irq);
 	/* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
-	for(i=0; i<7; i++)
+	for (i=0; i<7; i++) {
+		u64 start, end;
+		pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
 		seq_printf(m, LONG_FORMAT,
-			dev->resource[i].start |
+			((unsigned long)start) |
 			(dev->resource[i].flags & PCI_REGION_FLAG_MASK));
-	for(i=0; i<7; i++)
+	}
+	for (i=0; i<7; i++) {
+		u64 start, end;
+		pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
 		seq_printf(m, LONG_FORMAT,
 			dev->resource[i].start < dev->resource[i].end ?
-			dev->resource[i].end - dev->resource[i].start + 1 : 0);
+			(unsigned long)(end - start) + 1 : 0);
+	}
 	seq_putc(m, '\t');
 	if (drv)
 		seq_printf(m, "%s", drv->name);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 96f077f..27a294b 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -18,17 +18,21 @@
 
 static void pci_destroy_dev(struct pci_dev *dev)
 {
-	pci_proc_detach_device(dev);
-	pci_remove_sysfs_dev_files(dev);
-	device_unregister(&dev->dev);
+	if (!list_empty(&dev->global_list)) {
+		pci_proc_detach_device(dev);
+		pci_remove_sysfs_dev_files(dev);
+		device_unregister(&dev->dev);
+		spin_lock(&pci_bus_lock);
+		list_del(&dev->global_list);
+		dev->global_list.next = dev->global_list.prev = NULL;
+		spin_unlock(&pci_bus_lock);
+	}
 
 	/* Remove the device from the device lists, and prevent any further
 	 * list accesses from this device */
 	spin_lock(&pci_bus_lock);
 	list_del(&dev->bus_list);
-	list_del(&dev->global_list);
 	dev->bus_list.next = dev->bus_list.prev = NULL;
-	dev->global_list.next = dev->global_list.prev = NULL;
 	spin_unlock(&pci_bus_lock);
 
 	pci_free_resources(dev);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 1ba84be..6b628de 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -72,7 +72,10 @@
 	for (list = head.next; list;) {
 		res = list->res;
 		idx = res - &list->dev->resource[0];
-		pci_assign_resource(list->dev, idx);
+		if (pci_assign_resource(list->dev, idx)) {
+			res->start = 0;
+			res->flags = 0;
+		}
 		tmp = list;
 		list = list->next;
 		kfree(tmp);
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 34dbc37..bc6e462 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1916,9 +1916,9 @@
 } /* End __twa_shutdown() */
 
 /* Wrapper for __twa_shutdown */
-static void twa_shutdown(struct device *dev)
+static void twa_shutdown(struct pci_dev *pdev)
 {
-	struct Scsi_Host *host = pci_get_drvdata(to_pci_dev(dev));
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 
 	__twa_shutdown(tw_dev);
@@ -2140,9 +2140,7 @@
 	.id_table	= twa_pci_tbl,
 	.probe		= twa_probe,
 	.remove		= twa_remove,
-	.driver		= {
-		.shutdown = twa_shutdown
-	}
+	.shutdown	= twa_shutdown
 };
 
 /* This function is called on driver initialization */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index b6dc576..973c51f 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -2264,9 +2264,9 @@
 } /* End __tw_shutdown() */
 
 /* Wrapper for __tw_shutdown */
-static void tw_shutdown(struct device *dev)
+static void tw_shutdown(struct pci_dev *pdev)
 {
-	struct Scsi_Host *host = pci_get_drvdata(to_pci_dev(dev));
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 
 	__tw_shutdown(tw_dev);
@@ -2451,9 +2451,7 @@
 	.id_table	= tw_pci_tbl,
 	.probe		= tw_probe,
 	.remove		= tw_remove,
-	.driver		= {
-		.shutdown = tw_shutdown
-	}
+	.shutdown	= tw_shutdown,
 };
 
 /* This function is called on driver initialization */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 80d0226..babd483 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6012,7 +6012,7 @@
 
 /**
  * ipr_shutdown - Shutdown handler.
- * @dev:	device struct
+ * @pdev:	pci device struct
  *
  * This function is invoked upon system shutdown/reboot. It will issue
  * an adapter shutdown to the adapter to flush the write cache.
@@ -6020,9 +6020,9 @@
  * Return value:
  * 	none
  **/
-static void ipr_shutdown(struct device *dev)
+static void ipr_shutdown(struct pci_dev *pdev)
 {
-	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(to_pci_dev(dev));
+	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
 	unsigned long lock_flags = 0;
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
@@ -6068,9 +6068,7 @@
 	.id_table = ipr_pci_table,
 	.probe = ipr_probe,
 	.remove = ipr_remove,
-	.driver = {
-		.shutdown = ipr_shutdown,
-	},
+	.shutdown = ipr_shutdown,
 };
 
 /**
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index ec81532..a70cdf3 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -5036,9 +5036,9 @@
 }
 
 static void
-megaraid_shutdown(struct device *dev)
+megaraid_shutdown(struct pci_dev *pdev)
 {
-	struct Scsi_Host *host = pci_get_drvdata(to_pci_dev(dev));
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	adapter_t *adapter = (adapter_t *)host->hostdata;
 
 	__megaraid_shutdown(adapter);
@@ -5070,9 +5070,7 @@
 	.id_table	= megaraid_pci_tbl,
 	.probe		= megaraid_probe_one,
 	.remove		= __devexit_p(megaraid_remove_one),
-	.driver		= {
-		.shutdown = megaraid_shutdown,
-	},
+	.shutdown	= megaraid_shutdown,
 };
 
 static int __init megaraid_init(void)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 621dee8..10506f9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -632,7 +632,7 @@
 {
 	struct scsi_host_sg_pool *sgp;
 
-	BUG_ON(index > SG_MEMPOOL_NR);
+	BUG_ON(index >= SG_MEMPOOL_NR);
 
 	sgp = scsi_sg_pools + index;
 	mempool_free(sgl, sgp->pool);
diff --git a/fs/aio.c b/fs/aio.c
index 7afa222..06d7d43 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -58,6 +58,7 @@
 static LIST_HEAD(fput_head);
 
 static void aio_kick_handler(void *);
+static void aio_queue_work(struct kioctx *);
 
 /* aio_setup
  *	Creates the slab caches used by the aio routines, panic on
@@ -747,6 +748,14 @@
 		 * has already been kicked */
 		if (kiocbIsKicked(iocb)) {
 			__queue_kicked_iocb(iocb);
+
+			/*
+			 * __queue_kicked_iocb will always return 1 here, because
+			 * iocb->ki_run_list is empty at this point so it should
+			 * be safe to unconditionally queue the context into the
+			 * work queue.
+			 */
+			aio_queue_work(ctx);
 		}
 	}
 	return ret;
diff --git a/fs/buffer.c b/fs/buffer.c
index 13e5938..561e63a 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -278,7 +278,7 @@
  */
 static void do_sync(unsigned long wait)
 {
-	wakeup_bdflush(0);
+	wakeup_pdflush(0);
 	sync_inodes(0);		/* All mappings, inodes and their blockdevs */
 	DQUOT_SYNC(NULL);
 	sync_supers();		/* Write the superblocks */
@@ -497,7 +497,7 @@
 	struct zone **zones;
 	pg_data_t *pgdat;
 
-	wakeup_bdflush(1024);
+	wakeup_pdflush(1024);
 	yield();
 
 	for_each_pgdat(pgdat) {
diff --git a/fs/char_dev.c b/fs/char_dev.c
index e82aac9..a69a5d8 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -150,7 +150,7 @@
 	struct char_device_struct *cd = NULL, **cp;
 	int i = major_to_index(major);
 
-	up(&chrdevs_lock);
+	down(&chrdevs_lock);
 	for (cp = &chrdevs[i]; *cp; cp = &(*cp)->next)
 		if ((*cp)->major == major &&
 		    (*cp)->baseminor == baseminor &&
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index ccd632f..e463dca 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -749,24 +749,24 @@
  * 	to find a free region that is of my size and has not
  * 	been reserved.
  *
- *	on succeed, it returns the reservation window to be appended to.
- *	failed, return NULL.
  */
-static struct ext3_reserve_window_node *find_next_reservable_window(
+static int find_next_reservable_window(
 				struct ext3_reserve_window_node *search_head,
-				unsigned long size, int *start_block,
+				struct ext3_reserve_window_node *my_rsv,
+				struct super_block * sb, int start_block,
 				int last_block)
 {
 	struct rb_node *next;
 	struct ext3_reserve_window_node *rsv, *prev;
 	int cur;
+	int size = my_rsv->rsv_goal_size;
 
 	/* TODO: make the start of the reservation window byte-aligned */
 	/* cur = *start_block & ~7;*/
-	cur = *start_block;
+	cur = start_block;
 	rsv = search_head;
 	if (!rsv)
-		return NULL;
+		return -1;
 
 	while (1) {
 		if (cur <= rsv->rsv_end)
@@ -782,11 +782,11 @@
 		 * space with expected-size (or more)...
 		 */
 		if (cur > last_block)
-			return NULL;		/* fail */
+			return -1;		/* fail */
 
 		prev = rsv;
 		next = rb_next(&rsv->rsv_node);
-		rsv = list_entry(next, struct ext3_reserve_window_node, rsv_node);
+		rsv = list_entry(next,struct ext3_reserve_window_node,rsv_node);
 
 		/*
 		 * Reached the last reservation, we can just append to the
@@ -813,8 +813,25 @@
 	 * return the reservation window that we could append to.
 	 * succeed.
 	 */
-	*start_block = cur;
-	return prev;
+
+	if ((prev != my_rsv) && (!rsv_is_empty(&my_rsv->rsv_window)))
+		rsv_window_remove(sb, my_rsv);
+
+	/*
+	 * Let's book the whole avaliable window for now.  We will check the
+	 * disk bitmap later and then, if there are free blocks then we adjust
+	 * the window size if it's larger than requested.
+	 * Otherwise, we will remove this node from the tree next time
+	 * call find_next_reservable_window.
+	 */
+	my_rsv->rsv_start = cur;
+	my_rsv->rsv_end = cur + size - 1;
+	my_rsv->rsv_alloc_hit = 0;
+
+	if (prev != my_rsv)
+		ext3_rsv_window_add(sb, my_rsv);
+
+	return 0;
 }
 
 /**
@@ -852,6 +869,7 @@
  *	@sb: the super block
  *	@group: the group we are trying to allocate in
  *	@bitmap_bh: the block group block bitmap
+ *
  */
 static int alloc_new_reservation(struct ext3_reserve_window_node *my_rsv,
 		int goal, struct super_block *sb,
@@ -860,10 +878,10 @@
 	struct ext3_reserve_window_node *search_head;
 	int group_first_block, group_end_block, start_block;
 	int first_free_block;
-	int reservable_space_start;
-	struct ext3_reserve_window_node *prev_rsv;
 	struct rb_root *fs_rsv_root = &EXT3_SB(sb)->s_rsv_window_root;
 	unsigned long size;
+	int ret;
+	spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock;
 
 	group_first_block = le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block) +
 				group * EXT3_BLOCKS_PER_GROUP(sb);
@@ -875,6 +893,7 @@
 		start_block = goal + group_first_block;
 
 	size = my_rsv->rsv_goal_size;
+
 	if (!rsv_is_empty(&my_rsv->rsv_window)) {
 		/*
 		 * if the old reservation is cross group boundary
@@ -908,6 +927,8 @@
 			my_rsv->rsv_goal_size= size;
 		}
 	}
+
+	spin_lock(rsv_lock);
 	/*
 	 * shift the search start to the window near the goal block
 	 */
@@ -921,11 +942,16 @@
 	 * need to check the bitmap after we found a reservable window.
 	 */
 retry:
-	prev_rsv = find_next_reservable_window(search_head, size,
-						&start_block, group_end_block);
-	if (prev_rsv == NULL)
-		goto failed;
-	reservable_space_start = start_block;
+	ret = find_next_reservable_window(search_head, my_rsv, sb,
+						start_block, group_end_block);
+
+	if (ret == -1) {
+		if (!rsv_is_empty(&my_rsv->rsv_window))
+			rsv_window_remove(sb, my_rsv);
+		spin_unlock(rsv_lock);
+		return -1;
+	}
+
 	/*
 	 * On success, find_next_reservable_window() returns the
 	 * reservation window where there is a reservable space after it.
@@ -937,8 +963,9 @@
 	 * block. Search start from the start block of the reservable space
 	 * we just found.
 	 */
+	spin_unlock(rsv_lock);
 	first_free_block = bitmap_search_next_usable_block(
-			reservable_space_start - group_first_block,
+			my_rsv->rsv_start - group_first_block,
 			bitmap_bh, group_end_block - group_first_block + 1);
 
 	if (first_free_block < 0) {
@@ -946,54 +973,29 @@
 		 * no free block left on the bitmap, no point
 		 * to reserve the space. return failed.
 		 */
-		goto failed;
+		spin_lock(rsv_lock);
+		if (!rsv_is_empty(&my_rsv->rsv_window))
+			rsv_window_remove(sb, my_rsv);
+		spin_unlock(rsv_lock);
+		return -1;		/* failed */
 	}
+
 	start_block = first_free_block + group_first_block;
 	/*
 	 * check if the first free block is within the
-	 * free space we just found
+	 * free space we just reserved
 	 */
-	if ((start_block >= reservable_space_start) &&
-	  (start_block < reservable_space_start + size))
-		goto found_rsv_window;
+	if (start_block >= my_rsv->rsv_start && start_block < my_rsv->rsv_end)
+		return 0;		/* success */
 	/*
 	 * if the first free bit we found is out of the reservable space
-	 * this means there is no free block on the reservable space
-	 * we should continue search for next reservable space,
+	 * continue search for next reservable space,
 	 * start from where the free block is,
 	 * we also shift the list head to where we stopped last time
 	 */
-	search_head = prev_rsv;
+	search_head = my_rsv;
+	spin_lock(rsv_lock);
 	goto retry;
-
-found_rsv_window:
-	/*
-	 * great! the reservable space contains some free blocks.
-	 * if the search returns that we should add the new
-	 * window just next to where the old window, we don't
- 	 * need to remove the old window first then add it to the
-	 * same place, just update the new start and new end.
-	 */
-	if (my_rsv != prev_rsv)  {
-		if (!rsv_is_empty(&my_rsv->rsv_window))
-			rsv_window_remove(sb, my_rsv);
-	}
-	my_rsv->rsv_start = reservable_space_start;
-	my_rsv->rsv_end = my_rsv->rsv_start + size - 1;
-	my_rsv->rsv_alloc_hit = 0;
-	if (my_rsv != prev_rsv)  {
-		ext3_rsv_window_add(sb, my_rsv);
-	}
-	return 0;		/* succeed */
-failed:
-	/*
-	 * failed to find a new reservation window in the current
-	 * group, remove the current(stale) reservation window
-	 * if there is any
-	 */
-	if (!rsv_is_empty(&my_rsv->rsv_window))
-		rsv_window_remove(sb, my_rsv);
-	return -1;		/* failed */
 }
 
 /*
@@ -1023,7 +1025,6 @@
 			int goal, struct ext3_reserve_window_node * my_rsv,
 			int *errp)
 {
-	spinlock_t *rsv_lock;
 	unsigned long group_first_block;
 	int ret = 0;
 	int fatal;
@@ -1052,7 +1053,6 @@
 		ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, goal, NULL);
 		goto out;
 	}
-	rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock;
 	/*
 	 * goal is a group relative block number (if there is a goal)
 	 * 0 < goal < EXT3_BLOCKS_PER_GROUP(sb)
@@ -1078,30 +1078,21 @@
 	 * then we could go to allocate from the reservation window directly.
 	 */
 	while (1) {
-		struct ext3_reserve_window rsv_copy;
-
-		rsv_copy._rsv_start = my_rsv->rsv_start;
-		rsv_copy._rsv_end = my_rsv->rsv_end;
-
-		if (rsv_is_empty(&rsv_copy) || (ret < 0) ||
-			!goal_in_my_reservation(&rsv_copy, goal, group, sb)) {
-			spin_lock(rsv_lock);
+		if (rsv_is_empty(&my_rsv->rsv_window) || (ret < 0) ||
+			!goal_in_my_reservation(&my_rsv->rsv_window, goal, group, sb)) {
 			ret = alloc_new_reservation(my_rsv, goal, sb,
 							group, bitmap_bh);
-			rsv_copy._rsv_start = my_rsv->rsv_start;
-			rsv_copy._rsv_end = my_rsv->rsv_end;
-			spin_unlock(rsv_lock);
 			if (ret < 0)
 				break;			/* failed */
 
-			if (!goal_in_my_reservation(&rsv_copy, goal, group, sb))
+			if (!goal_in_my_reservation(&my_rsv->rsv_window, goal, group, sb))
 				goal = -1;
 		}
-		if ((rsv_copy._rsv_start >= group_first_block + EXT3_BLOCKS_PER_GROUP(sb))
-		    || (rsv_copy._rsv_end < group_first_block))
+		if ((my_rsv->rsv_start >= group_first_block + EXT3_BLOCKS_PER_GROUP(sb))
+		    || (my_rsv->rsv_end < group_first_block))
 			BUG();
 		ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, goal,
-					   &rsv_copy);
+					   &my_rsv->rsv_window);
 		if (ret >= 0) {
 			my_rsv->rsv_alloc_hit++;
 			break;				/* succeed */
diff --git a/fs/ext3/file.c b/fs/ext3/file.c
index 5ad8cf02..98e7834 100644
--- a/fs/ext3/file.c
+++ b/fs/ext3/file.c
@@ -36,7 +36,11 @@
 	/* if we are the last writer on the inode, drop the block reservation */
 	if ((filp->f_mode & FMODE_WRITE) &&
 			(atomic_read(&inode->i_writecount) == 1))
+	{
+		down(&EXT3_I(inode)->truncate_sem);
 		ext3_discard_reservation(inode);
+		up(&EXT3_I(inode)->truncate_sem);
+	}
 	if (is_dx(inode) && filp->private_data)
 		ext3_htree_free_dir_info(filp->private_data);
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index b4b3e8a..a6d1779 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -944,7 +944,8 @@
 					"for remount\n");
 				return 0;
 			}
-			match_int(&args[0], &option);
+			if (match_int(&args[0], &option) != 0)
+				return 0;
 			*n_blocks_count = option;
 			break;
 		case Opt_nobh:
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index ee3536f..1b7a3ef 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -2,7 +2,7 @@
 #include <linux/nfs.h>
 #include <linux/nfs3.h>
 #include <linux/nfs_fs.h>
-#include <linux/xattr_acl.h>
+#include <linux/posix_acl_xattr.h>
 #include <linux/nfsacl.h>
 
 #define NFSDBG_FACILITY	NFSDBG_PROC
@@ -53,9 +53,9 @@
 	struct posix_acl *acl;
 	int type, error = 0;
 
-	if (strcmp(name, XATTR_NAME_ACL_ACCESS) == 0)
+	if (strcmp(name, POSIX_ACL_XATTR_ACCESS) == 0)
 		type = ACL_TYPE_ACCESS;
-	else if (strcmp(name, XATTR_NAME_ACL_DEFAULT) == 0)
+	else if (strcmp(name, POSIX_ACL_XATTR_DEFAULT) == 0)
 		type = ACL_TYPE_DEFAULT;
 	else
 		return -EOPNOTSUPP;
@@ -82,9 +82,9 @@
 	struct posix_acl *acl;
 	int type, error;
 
-	if (strcmp(name, XATTR_NAME_ACL_ACCESS) == 0)
+	if (strcmp(name, POSIX_ACL_XATTR_ACCESS) == 0)
 		type = ACL_TYPE_ACCESS;
-	else if (strcmp(name, XATTR_NAME_ACL_DEFAULT) == 0)
+	else if (strcmp(name, POSIX_ACL_XATTR_DEFAULT) == 0)
 		type = ACL_TYPE_DEFAULT;
 	else
 		return -EOPNOTSUPP;
@@ -103,9 +103,9 @@
 	struct inode *inode = dentry->d_inode;
 	int type;
 
-	if (strcmp(name, XATTR_NAME_ACL_ACCESS) == 0)
+	if (strcmp(name, POSIX_ACL_XATTR_ACCESS) == 0)
 		type = ACL_TYPE_ACCESS;
-	else if (strcmp(name, XATTR_NAME_ACL_DEFAULT) == 0)
+	else if (strcmp(name, POSIX_ACL_XATTR_DEFAULT) == 0)
 		type = ACL_TYPE_DEFAULT;
 	else
 		return -EOPNOTSUPP;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index de340ff..be24ead 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -46,10 +46,9 @@
 #include <linux/nfsd/nfsfh.h>
 #include <linux/quotaops.h>
 #include <linux/dnotify.h>
-#include <linux/xattr_acl.h>
 #include <linux/posix_acl.h>
-#ifdef CONFIG_NFSD_V4
 #include <linux/posix_acl_xattr.h>
+#ifdef CONFIG_NFSD_V4
 #include <linux/xattr.h>
 #include <linux/nfs4.h>
 #include <linux/nfs4_acl.h>
@@ -1872,10 +1871,10 @@
 		return ERR_PTR(-EOPNOTSUPP);
 	switch(type) {
 		case ACL_TYPE_ACCESS:
-			name = XATTR_NAME_ACL_ACCESS;
+			name = POSIX_ACL_XATTR_ACCESS;
 			break;
 		case ACL_TYPE_DEFAULT:
-			name = XATTR_NAME_ACL_DEFAULT;
+			name = POSIX_ACL_XATTR_DEFAULT;
 			break;
 		default:
 			return ERR_PTR(-EOPNOTSUPP);
@@ -1919,17 +1918,17 @@
 		return -EOPNOTSUPP;
 	switch(type) {
 		case ACL_TYPE_ACCESS:
-			name = XATTR_NAME_ACL_ACCESS;
+			name = POSIX_ACL_XATTR_ACCESS;
 			break;
 		case ACL_TYPE_DEFAULT:
-			name = XATTR_NAME_ACL_DEFAULT;
+			name = POSIX_ACL_XATTR_DEFAULT;
 			break;
 		default:
 			return -EOPNOTSUPP;
 	}
 
 	if (acl && acl->a_count) {
-		size = xattr_acl_size(acl->a_count);
+		size = posix_acl_xattr_size(acl->a_count);
 		value = kmalloc(size, GFP_KERNEL);
 		if (!value)
 			return -ENOMEM;
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 3f6dc71..4673157 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -159,7 +159,7 @@
 	char *nameptr;
 	uint8_t lfi;
 	uint16_t liu;
-	loff_t size = (udf_ext0_offset(dir) + dir->i_size) >> 2;
+	loff_t size;
 	kernel_lb_addr bloc, eloc;
 	uint32_t extoffset, elen, offset;
 	struct buffer_head *bh = NULL;
@@ -167,6 +167,8 @@
 	if (!dir)
 		return NULL;
 
+	size = (udf_ext0_offset(dir) + dir->i_size) >> 2;
+
 	f_pos = (udf_ext0_offset(dir) >> 2);
 
 	fibh->soffset = fibh->eoffset = (f_pos & ((dir->i_sb->s_blocksize - 1) >> 2)) << 2;
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index c627bc4..9ad1424 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -108,6 +108,21 @@
 typedef int (*acpi_op_match)	(struct acpi_device *device,
 				 struct acpi_driver *driver);
 
+struct acpi_bus_ops {
+	u32 			acpi_op_add:1;
+	u32			acpi_op_remove:1;
+	u32			acpi_op_lock:1;
+	u32			acpi_op_start:1;
+	u32			acpi_op_stop:1;
+	u32			acpi_op_suspend:1;
+	u32			acpi_op_resume:1;
+	u32			acpi_op_scan:1;
+	u32			acpi_op_bind:1;
+	u32			acpi_op_unbind:1;
+	u32			acpi_op_match:1;
+	u32			reserved:21;
+};
+
 struct acpi_device_ops {
 	acpi_op_add		add;
 	acpi_op_remove		remove;
@@ -327,9 +342,9 @@
 int acpi_bus_receive_event (struct acpi_bus_event *event);
 int acpi_bus_register_driver (struct acpi_driver *driver);
 int acpi_bus_unregister_driver (struct acpi_driver *driver);
-int acpi_bus_scan (struct acpi_device *start);
 int acpi_bus_add (struct acpi_device **child, struct acpi_device *parent,
 		acpi_handle handle, int type);
+int acpi_bus_start (struct acpi_device *device);
 
 
 int acpi_match_ids (struct acpi_device	*device, char	*ids);
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index c62e92e..4ec722d 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -68,6 +68,7 @@
 
 struct pci_bus;
 
+acpi_status acpi_get_pci_id (acpi_handle handle, struct acpi_pci_id *id);
 int acpi_pci_bind (struct acpi_device *device);
 int acpi_pci_unbind (struct acpi_device *device);
 int acpi_pci_bind_root (struct acpi_device *device, struct acpi_pci_id *id, struct pci_bus *bus);
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index 0c7b57b..b7806aa 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -223,6 +223,25 @@
 	/* Nothing to do. */
 }
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
 /* TODO: integrate with include/asm-generic/pci.h ? */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h
new file mode 100644
index 0000000..0d276e6
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/audio.h
@@ -0,0 +1,49 @@
+/* linux/include/asm-arm/arch-s3c2410/audio.h
+ *
+ * (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Audio platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *	20-Nov-2004 BJD  Created file
+ *	07-Mar-2005 BJD  Added suspend/resume calls
+*/
+
+#ifndef __ASM_ARCH_AUDIO_H
+#define __ASM_ARCH_AUDIO_H __FILE__
+
+/* struct s3c24xx_iis_ops
+ *
+ * called from the s3c24xx audio core to deal with the architecture
+ * or the codec's setup and control.
+ *
+ * the pointer to itself is passed through in case the caller wants to
+ * embed this in an larger structure for easy reference to it's context.
+*/
+
+struct s3c24xx_iis_ops {
+	struct module *owner;
+
+	int	(*startup)(struct s3c24xx_iis_ops *me);
+	void	(*shutdown)(struct s3c24xx_iis_ops *me);
+	int	(*suspend)(struct s3c24xx_iis_ops *me);
+	int	(*resume)(struct s3c24xx_iis_ops *me);
+
+	int	(*open)(struct s3c24xx_iis_ops *me, snd_pcm_substream_t *strm);
+	int	(*close)(struct s3c24xx_iis_ops *me, snd_pcm_substream_t *strm);
+	int	(*prepare)(struct s3c24xx_iis_ops *me, snd_pcm_substream_t *strm, snd_pcm_runtime_t *rt);
+};
+
+struct s3c24xx_platdata_iis {
+	const char		*codec_clk;
+	struct s3c24xx_iis_ops	*ops;
+	int			(*match_dev)(struct device *dev);
+};
+
+#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
index 40ffaef..e300646 100644
--- a/include/asm-arm/pci.h
+++ b/include/asm-arm/pci.h
@@ -42,6 +42,16 @@
 #define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
                                enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h
index a6a4692..b4efe5e 100644
--- a/include/asm-frv/pci.h
+++ b/include/asm-frv/pci.h
@@ -57,6 +57,16 @@
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 /*
  *	These are pretty much arbitary with the CoMEM implementation.
  *	We have the whole address space to ourselves.
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
index fb749b8..3561899 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -99,6 +99,16 @@
 {
 }
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 #endif /* __KERNEL__ */
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
index 38a7a72..1093f35 100644
--- a/include/asm-ia64/iosapic.h
+++ b/include/asm-ia64/iosapic.h
@@ -71,8 +71,11 @@
 }
 
 extern void __init iosapic_system_init (int pcat_compat);
-extern void __init iosapic_init (unsigned long address,
+extern int __devinit iosapic_init (unsigned long address,
 				    unsigned int gsi_base);
+#ifdef CONFIG_HOTPLUG
+extern int iosapic_remove (unsigned int gsi_base);
+#endif /* CONFIG_HOTPLUG */
 extern int gsi_to_vector (unsigned int gsi);
 extern int gsi_to_irq (unsigned int gsi);
 extern void iosapic_enable_intr (unsigned int vector);
@@ -94,11 +97,14 @@
 
 extern void iosapic_pci_fixup (int);
 #ifdef CONFIG_NUMA
-extern void __init map_iosapic_to_node (unsigned int, int);
+extern void __devinit map_iosapic_to_node (unsigned int, int);
 #endif
 #else
 #define iosapic_system_init(pcat_compat)			do { } while (0)
-#define iosapic_init(address,gsi_base)				do { } while (0)
+#define iosapic_init(address,gsi_base)				(-EINVAL)
+#ifdef CONFIG_HOTPLUG
+#define iosapic_remove(gsi_base)				(-ENODEV)
+#endif /* CONFIG_HOTPLUG */
 #define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
 #define iosapic_unregister_intr(irq)				do { } while (0)
 #define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
index a8314ee..0c4c5d8 100644
--- a/include/asm-ia64/pci.h
+++ b/include/asm-ia64/pci.h
@@ -82,6 +82,25 @@
 #define sg_dma_len(sg)		((sg)->dma_length)
 #define sg_dma_address(sg)	((sg)->dma_address)
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
 				enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c9c576b..2d323b6 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -130,6 +130,16 @@
 extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
 	dma64_addr_t dma_addr, size_t len, int direction);
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 extern void pcibios_resource_to_bus(struct pci_dev *dev,
 	struct pci_bus_region *region, struct resource *res);
 
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index 0763c29..ee741c1 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -230,6 +230,25 @@
 /* export the pci_ DMA API in terms of the dma_ one */
 #include <asm-generic/pci-dma-compat.h>
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
 extern void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res);
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
index ce5ae6d..db0a2a0 100644
--- a/include/asm-ppc/pci.h
+++ b/include/asm-ppc/pci.h
@@ -69,6 +69,16 @@
 #define pci_unmap_len(PTR, LEN_NAME)		(0)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 /*
  * At present there are very few 32-bit PPC machines that can have
  * memory above the 4GB point, and we don't support that.
@@ -103,6 +113,12 @@
 					 unsigned long size,
 					 pgprot_t prot);
 
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 u64 *start, u64 *end);
+
+
 #endif	/* __KERNEL__ */
 
 #endif /* __PPC_PCI_H */
diff --git a/include/asm-ppc64/byteorder.h b/include/asm-ppc64/byteorder.h
index 8032753..8b57da6 100644
--- a/include/asm-ppc64/byteorder.h
+++ b/include/asm-ppc64/byteorder.h
@@ -40,7 +40,6 @@
 	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
 }
 
-#if 0
 static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
 {
 	__u16 result;
@@ -63,17 +62,8 @@
 	return result;
 }
 
-static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 value)
-{
-	__u64 result;
-#error implement me
-}
-
 #define __arch__swab16(x) ___arch__swab16(x)
 #define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab64(x) ___arch__swab64(x)
-
-#endif
 
 /* The same, but returns converted value from the location pointer by addr. */
 #define __arch__swab16p(addr) ld_le16(addr)
diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h
index 6cd593f..d12dfce 100644
--- a/include/asm-ppc64/pci.h
+++ b/include/asm-ppc64/pci.h
@@ -78,6 +78,25 @@
 	return 0;
 }
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
 extern int pci_domain_nr(struct pci_bus *bus);
 
 /* Decide whether to display the domain number in /proc */
@@ -136,6 +155,13 @@
 					 unsigned long size,
 					 pgprot_t prot);
 
+#ifdef CONFIG_PPC_MULTIPLATFORM
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 u64 *start, u64 *end);
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
 
 #endif	/* __KERNEL__ */
 
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index 9c3b63d..2604488 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -96,6 +96,16 @@
 #define sg_dma_address(sg)	(virt_to_bus((sg)->dma_address))
 #define sg_dma_len(sg)		((sg)->length)
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 /* Board-specific fixup routines. */
 extern void pcibios_fixup(void);
 extern void pcibios_fixup_irqs(void);
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
index 8cc14e139..c68870e 100644
--- a/include/asm-sh64/pci.h
+++ b/include/asm-sh64/pci.h
@@ -86,6 +86,16 @@
 #define sg_dma_address(sg)	((sg)->dma_address)
 #define sg_dma_len(sg)		((sg)->length)
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 /* Board-specific fixup routines. */
 extern void pcibios_fixup(void);
 extern void pcibios_fixup_irqs(void);
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
index d200a25..44bb387 100644
--- a/include/asm-sparc/pci.h
+++ b/include/asm-sparc/pci.h
@@ -144,6 +144,16 @@
 
 #define pci_dac_dma_supported(dev, mask)	(0)
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 static inline void pcibios_add_platform_entries(struct pci_dev *dev)
 {
 }
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
index 2a0c85c..84e41c1 100644
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -220,6 +220,25 @@
 	return (dma_addr == PCI_DMA_ERROR_CODE);
 }
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
 /* Return the index of the PCI controller for device PDEV. */
 
 extern int pci_domain_nr(struct pci_bus *bus);
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
index e419414..8e79be0 100644
--- a/include/asm-v850/pci.h
+++ b/include/asm-v850/pci.h
@@ -81,6 +81,16 @@
 pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
 		     dma_addr_t dma_addr);
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 static inline void pcibios_add_platform_entries(struct pci_dev *dev)
 {
 }
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index 8712520..c1961db 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -123,6 +123,16 @@
 	flush_write_buffers();
 }
 
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index b123cc0..ef84836 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -342,11 +342,19 @@
 
 /* PCI MMCONFIG */
 
+/* Defined in PCI Firmware Specification 3.0 */
+struct acpi_table_mcfg_config {
+	u32				base_address;
+	u32				base_reserved;
+	u16				pci_segment_group_number;
+	u8				start_bus_number;
+	u8				end_bus_number;
+	u8				reserved[4];
+} __attribute__ ((packed));
 struct acpi_table_mcfg {
 	struct acpi_table_header	header;
 	u8				reserved[8];
-	u32				base_address;
-	u32				base_reserved;
+	struct acpi_table_mcfg_config	config[0];
 } __attribute__ ((packed));
 
 /* Table Handlers */
@@ -391,6 +399,7 @@
 int acpi_get_table_header_early (enum acpi_table_id id, struct acpi_table_header **header);
 int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
 int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
+int acpi_parse_mcfg (unsigned long phys_addr, unsigned long size);
 void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr);
 void acpi_table_print_madt_entry (acpi_table_entry_header *madt);
 void acpi_table_print_srat_entry (acpi_table_entry_header *srat);
@@ -407,9 +416,13 @@
 int acpi_unmap_lsapic(int cpu);
 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
 
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
+
 extern int acpi_mp_config;
 
-extern u32 pci_mmcfg_base_addr;
+extern struct acpi_table_mcfg_config *pci_mmcfg_config;
+extern int pci_mmcfg_config_num;
 
 extern int sbf_port ;
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 21a8674..0881b5c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -96,6 +96,7 @@
 
 void put_io_context(struct io_context *ioc);
 void exit_io_context(void);
+struct io_context *current_io_context(int gfp_flags);
 struct io_context *get_io_context(int gfp_flags);
 void copy_io_context(struct io_context **pdst, struct io_context **psrc);
 void swap_io_context(struct io_context **ioc1, struct io_context **ioc2);
diff --git a/include/linux/byteorder/swabb.h b/include/linux/byteorder/swabb.h
index d28d9a8..d5f2a32 100644
--- a/include/linux/byteorder/swabb.h
+++ b/include/linux/byteorder/swabb.h
@@ -92,29 +92,32 @@
 #endif /* OPTIMIZE */
 
 
-static __inline__ __const__ __u32 __fswahw32(__u32 x)
+static inline __u32 __fswahw32(__u32 x)
 {
 	return __arch__swahw32(x);
 }
-static __inline__ __u32 __swahw32p(__u32 *x)
+
+static inline __u32 __swahw32p(__u32 *x)
 {
 	return __arch__swahw32p(x);
 }
-static __inline__ void __swahw32s(__u32 *addr)
+
+static inline void __swahw32s(__u32 *addr)
 {
 	__arch__swahw32s(addr);
 }
 
-
-static __inline__ __const__ __u32 __fswahb32(__u32 x)
+static inline __u32 __fswahb32(__u32 x)
 {
 	return __arch__swahb32(x);
 }
-static __inline__ __u32 __swahb32p(__u32 *x)
+
+static inline __u32 __swahb32p(__u32 *x)
 {
 	return __arch__swahb32p(x);
 }
-static __inline__ void __swahb32s(__u32 *addr)
+
+static inline void __swahb32s(__u32 *addr)
 {
 	__arch__swahb32s(addr);
 }
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index d228230..5416956 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -25,6 +25,7 @@
 #define _LINUX_I2C_DEV_H
 
 #include <linux/types.h>
+#include <linux/compiler.h>
 
 /* Some IOCTL commands are defined in <linux/i2c.h> */
 /* Note: 10-bit addresses are NOT supported! */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1227779..069d3b8 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -85,9 +85,10 @@
 extern int noirqdebug_setup(char *str);
 
 extern fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
-				       struct irqaction *action);
+					struct irqaction *action);
 extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
-extern void note_interrupt(unsigned int irq, irq_desc_t *desc, int action_ret);
+extern void note_interrupt(unsigned int irq, irq_desc_t *desc,
+					int action_ret, struct pt_regs *regs);
 extern int can_request_irq(unsigned int irq, unsigned long irqflags);
 
 extern void init_irq_proc(void);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index b5238bd..66798b4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -734,16 +734,20 @@
 /* Generic PCI functions used internally */
 
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
+void pci_bus_add_devices(struct pci_bus *bus);
 struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata);
 static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata)
 {
-	return pci_scan_bus_parented(NULL, bus, ops, sysdata);
+	struct pci_bus *root_bus;
+	root_bus = pci_scan_bus_parented(NULL, bus, ops, sysdata);
+	if (root_bus)
+		pci_bus_add_devices(root_bus);
+	return root_bus;
 }
 int pci_scan_slot(struct pci_bus *bus, int devfn);
 struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn);
 unsigned int pci_scan_child_bus(struct pci_bus *bus);
 void pci_bus_add_device(struct pci_dev *dev);
-void pci_bus_add_devices(struct pci_bus *bus);
 void pci_name_device(struct pci_dev *dev);
 char *pci_class_name(u32 class);
 void pci_read_bridge_bases(struct pci_bus *child);
@@ -870,6 +874,15 @@
 #define	pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
 #define	pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
 
+enum pci_dma_burst_strategy {
+	PCI_DMA_BURST_INFINITY,	/* make bursts as large as possible,
+				   strategy_parameter is N/A */
+	PCI_DMA_BURST_BOUNDARY, /* disconnect at every strategy_parameter
+				   byte boundaries */
+	PCI_DMA_BURST_MULTIPLE, /* disconnect at some multiple of
+				   strategy_parameter byte boundaries */
+};
+
 #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
 extern struct pci_dev *isa_bridge;
 #endif
@@ -972,6 +985,8 @@
 }
 #endif
 
+#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
+
 #endif /* !CONFIG_PCI */
 
 /* these helpers provide future and backwards compatibility
@@ -1016,6 +1031,20 @@
 #define pci_pretty_name(dev) ""
 #endif
 
+
+/* Some archs don't want to expose struct resource to userland as-is
+ * in sysfs and /proc
+ */
+#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
+static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
+                const struct resource *rsrc, u64 *start, u64 *end)
+{
+	*start = rsrc->start;
+	*end = rsrc->end;
+}
+#endif /* HAVE_ARCH_PCI_RESOURCE_TO_USER */
+
+
 /*
  *  The world is not perfect and supplies us with broken PCI devices.
  *  For at least a part of these bugs we need a work-around, so both
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1e0bc6a..c3ee1ae 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -62,6 +62,8 @@
 
 #define PCI_BASE_CLASS_SYSTEM		0x08
 #define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_PIC_IOAPIC	0x080010
+#define PCI_CLASS_SYSTEM_PIC_IOXAPIC	0x080020
 #define PCI_CLASS_SYSTEM_DMA		0x0801
 #define PCI_CLASS_SYSTEM_TIMER		0x0802
 #define PCI_CLASS_SYSTEM_RTC		0x0803
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
index 39e7ff4..ee21e6b 100644
--- a/include/linux/usb_ch9.h
+++ b/include/linux/usb_ch9.h
@@ -19,7 +19,7 @@
 #ifndef __LINUX_USB_CH9_H
 #define __LINUX_USB_CH9_H
 
-#include <asm/types.h>		/* __u8 etc */
+#include <linux/types.h>	/* __u8 etc */
 
 /*-------------------------------------------------------------------------*/
 
@@ -294,8 +294,8 @@
 	__le16 wMaxPacketSize;
 	__u8  bInterval;
 
-	// NOTE:  these two are _only_ in audio endpoints.
-	// use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof.
+	/* NOTE:  these two are _only_ in audio endpoints. */
+	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
 	__u8  bRefresh;
 	__u8  bSynchAddress;
 } __attribute__ ((packed));
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 4e0edce..acbfc52 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -221,6 +221,8 @@
 /*  Vendor-specific formats   */
 #define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W','N','V','A') /* Winnov hw compress */
 #define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P','W','C','1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index d5c3fe1..542dbae 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -85,7 +85,7 @@
 /*
  * mm/page-writeback.c
  */
-int wakeup_bdflush(long nr_pages);
+int wakeup_pdflush(long nr_pages);
 void laptop_io_completion(void);
 void laptop_sync_completion(void);
 void throttle_vm_writeout(void);
diff --git a/include/linux/xattr_acl.h b/include/linux/xattr_acl.h
deleted file mode 100644
index 7a1f9b9..0000000
--- a/include/linux/xattr_acl.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-  File: linux/xattr_acl.h
-
-  (extended attribute representation of access control lists)
-
-  (C) 2000 Andreas Gruenbacher, <a.gruenbacher@computer.org>
-*/
-
-#ifndef _LINUX_XATTR_ACL_H
-#define _LINUX_XATTR_ACL_H
-
-#include <linux/posix_acl.h>
-
-#define XATTR_NAME_ACL_ACCESS	"system.posix_acl_access"
-#define XATTR_NAME_ACL_DEFAULT	"system.posix_acl_default"
-
-#define XATTR_ACL_VERSION	0x0002
-
-typedef struct {
-	__u16		e_tag;
-	__u16		e_perm;
-	__u32		e_id;
-} xattr_acl_entry;
-
-typedef struct {
-	__u32		a_version;
-	xattr_acl_entry	a_entries[0];
-} xattr_acl_header;
-
-static inline size_t xattr_acl_size(int count)
-{
-	return sizeof(xattr_acl_header) + count * sizeof(xattr_acl_entry);
-}
-
-static inline int xattr_acl_count(size_t size)
-{
-	if (size < sizeof(xattr_acl_header))
-		return -1;
-	size -= sizeof(xattr_acl_header);
-	if (size % sizeof(xattr_acl_entry))
-		return -1;
-	return size / sizeof(xattr_acl_entry);
-}
-
-struct posix_acl * posix_acl_from_xattr(const void *value, size_t size);
-int posix_acl_to_xattr(const struct posix_acl *acl, void *buffer, size_t size);
-
-
-
-#endif /* _LINUX_XATTR_ACL_H */
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 2dd8310..4794c56 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -1,5 +1,6 @@
 
-/*
+/* $Id: tuner.h,v 1.33 2005/06/21 14:58:08 mkrufky Exp $
+ *
     tuner.h - definition for different tuners
 
     Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
@@ -23,6 +24,8 @@
 #ifndef _TUNER_H
 #define _TUNER_H
 
+#include <linux/videodev2.h>
+
 #include "id.h"
 
 #define ADDR_UNSET (255)
@@ -88,7 +91,7 @@
 #define TUNER_LG_NTSC_TAPE       47
 
 #define TUNER_TNF_8831BGFF       48
-#define TUNER_MICROTUNE_4042FI5  49	/* FusionHDTV 3 Gold - 4042 FI5 (3X 8147) */
+#define TUNER_MICROTUNE_4042FI5  49	/* DViCO FusionHDTV 3 Gold-Q - 4042 FI5 (3X 8147) */
 #define TUNER_TCL_2002N          50
 #define TUNER_PHILIPS_FM1256_IH3   51
 
@@ -98,18 +101,18 @@
 #define TUNER_LG_PAL_TAPE        55    /* Hauppauge PVR-150 PAL */
 
 #define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */
-#define TUNER_PHILIPS_FQ1236A_MK4 57   /* Hauppauge PVR-500MCE NTSC */
+#define TUNER_PHILIPS_FQ1236A_MK4   57   /* Hauppauge PVR-500MCE NTSC */
 
 #define TUNER_YMEC_TVF_8531MF 58
 #define TUNER_YMEC_TVF_5533MF 59	/* Pixelview Pro Ultra NTSC */
-#define TUNER_THOMSON_DTT7611 60
+#define TUNER_THOMSON_DTT7611 60	/* DViCO FusionHDTV 3 Gold-T */
 #define TUNER_TENA_9533_DI    61
+
 #define TUNER_TEA5767         62	/* Only FM Radio Tuner */
+#define TUNER_PHILIPS_FMD1216ME_MK3 63
 
 #define TEA5767_TUNER_NAME "Philips TEA5767HN FM Radio"
 
-#define TUNER_THOMSON_DTT7611    60
-
 #define NOTUNER 0
 #define PAL     1	/* PAL_BG */
 #define PAL_I   2
@@ -194,11 +197,15 @@
 	unsigned char i2c_easy_mode[2];
 	unsigned char i2c_set_freq[8];
 
+	/* used to keep track of audmode */
+	unsigned int audmode;
+
 	/* function ptrs */
 	void (*tv_freq)(struct i2c_client *c, unsigned int freq);
 	void (*radio_freq)(struct i2c_client *c, unsigned int freq);
 	int  (*has_signal)(struct i2c_client *c);
 	int  (*is_stereo)(struct i2c_client *c);
+	int  (*set_tuner)(struct i2c_client *c, struct v4l2_tuner *v);
 };
 
 extern unsigned int tuner_debug;
@@ -206,6 +213,7 @@
 
 extern int microtune_init(struct i2c_client *c);
 extern int tda8290_init(struct i2c_client *c);
+extern int tea5767_tuner_init(struct i2c_client *c);
 extern int default_tuner_init(struct i2c_client *c);
 
 #define tuner_warn(fmt, arg...) \
diff --git a/init/main.c b/init/main.c
index d324801..b5e421e 100644
--- a/init/main.c
+++ b/init/main.c
@@ -383,6 +383,13 @@
 	numa_default_policy();
 	unlock_kernel();
 	preempt_enable_no_resched();
+
+	/*
+	 * The boot idle thread must execute schedule()
+	 * at least one to get things moving:
+	 */
+	schedule();
+
 	cpu_idle();
 } 
 
diff --git a/kernel/irq/autoprobe.c b/kernel/irq/autoprobe.c
index 98d62d8..3467097 100644
--- a/kernel/irq/autoprobe.c
+++ b/kernel/irq/autoprobe.c
@@ -9,6 +9,7 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 
 /*
  * Autodetection depends on the fact that any interrupt that
@@ -26,7 +27,7 @@
  */
 unsigned long probe_irq_on(void)
 {
-	unsigned long val, delay;
+	unsigned long val;
 	irq_desc_t *desc;
 	unsigned int i;
 
@@ -45,8 +46,7 @@
 	}
 
 	/* Wait for longstanding interrupts to trigger. */
-	for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
-		/* about 20ms delay */ barrier();
+	msleep(20);
 
 	/*
 	 * enable any unassigned irqs
@@ -68,8 +68,7 @@
 	/*
 	 * Wait for spurious interrupts to trigger
 	 */
-	for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
-		/* about 100ms delay */ barrier();
+	msleep(100);
 
 	/*
 	 * Now filter out any obviously spurious interrupts
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 436c7d9..c29f83c 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -172,7 +172,7 @@
 
 		spin_lock(&desc->lock);
 		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret);
+			note_interrupt(irq, desc, action_ret, regs);
 		if (likely(!(desc->status & IRQ_PENDING)))
 			break;
 		desc->status &= ~IRQ_PENDING;
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index ba039e8..7df9abd 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -11,6 +11,83 @@
 #include <linux/kallsyms.h>
 #include <linux/interrupt.h>
 
+static int irqfixup;
+
+/*
+ * Recovery handler for misrouted interrupts.
+ */
+
+static int misrouted_irq(int irq, struct pt_regs *regs)
+{
+	int i;
+	irq_desc_t *desc;
+	int ok = 0;
+	int work = 0;	/* Did we do work for a real IRQ */
+
+	for(i = 1; i < NR_IRQS; i++) {
+		struct irqaction *action;
+
+		if (i == irq)	/* Already tried */
+			continue;
+		desc = &irq_desc[i];
+		spin_lock(&desc->lock);
+		action = desc->action;
+		/* Already running on another processor */
+		if (desc->status & IRQ_INPROGRESS) {
+			/*
+			 * Already running: If it is shared get the other
+			 * CPU to go looking for our mystery interrupt too
+			 */
+			if (desc->action && (desc->action->flags & SA_SHIRQ))
+				desc->status |= IRQ_PENDING;
+			spin_unlock(&desc->lock);
+			continue;
+		}
+		/* Honour the normal IRQ locking */
+		desc->status |= IRQ_INPROGRESS;
+		spin_unlock(&desc->lock);
+		while (action) {
+			/* Only shared IRQ handlers are safe to call */
+			if (action->flags & SA_SHIRQ) {
+				if (action->handler(i, action->dev_id, regs) ==
+						IRQ_HANDLED)
+					ok = 1;
+			}
+			action = action->next;
+		}
+		local_irq_disable();
+		/* Now clean up the flags */
+		spin_lock(&desc->lock);
+		action = desc->action;
+
+		/*
+		 * While we were looking for a fixup someone queued a real
+		 * IRQ clashing with our walk
+		 */
+
+		while ((desc->status & IRQ_PENDING) && action) {
+			/*
+			 * Perform real IRQ processing for the IRQ we deferred
+			 */
+			work = 1;
+			spin_unlock(&desc->lock);
+			handle_IRQ_event(i, regs, action);
+			spin_lock(&desc->lock);
+			desc->status &= ~IRQ_PENDING;
+		}
+		desc->status &= ~IRQ_INPROGRESS;
+		/*
+		 * If we did actual work for the real IRQ line we must let the
+		 * IRQ controller clean up too
+		 */
+		if(work)
+			desc->handler->end(i);
+		spin_unlock(&desc->lock);
+	}
+	/* So the caller can adjust the irq error counts */
+	return ok;
+}
+
 /*
  * If 99,900 of the previous 100,000 interrupts have not been handled
  * then assume that the IRQ is stuck in some manner. Drop a diagnostic
@@ -31,7 +108,8 @@
 		printk(KERN_ERR "irq event %d: bogus return value %x\n",
 				irq, action_ret);
 	} else {
-		printk(KERN_ERR "irq %d: nobody cared!\n", irq);
+		printk(KERN_ERR "irq %d: nobody cared (try booting with "
+				"the \"irqpoll\" option)\n", irq);
 	}
 	dump_stack();
 	printk(KERN_ERR "handlers:\n");
@@ -55,7 +133,8 @@
 	}
 }
 
-void note_interrupt(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret)
+void note_interrupt(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret,
+			struct pt_regs *regs)
 {
 	if (action_ret != IRQ_HANDLED) {
 		desc->irqs_unhandled++;
@@ -63,6 +142,15 @@
 			report_bad_irq(irq, desc, action_ret);
 	}
 
+	if (unlikely(irqfixup)) {
+		/* Don't punish working computers */
+		if ((irqfixup == 2 && irq == 0) || action_ret == IRQ_NONE) {
+			int ok = misrouted_irq(irq, regs);
+			if (action_ret == IRQ_NONE)
+				desc->irqs_unhandled -= ok;
+		}
+	}
+
 	desc->irq_count++;
 	if (desc->irq_count < 100000)
 		return;
@@ -94,3 +182,24 @@
 
 __setup("noirqdebug", noirqdebug_setup);
 
+static int __init irqfixup_setup(char *str)
+{
+	irqfixup = 1;
+	printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n");
+	printk(KERN_WARNING "This may impact system performance.\n");
+	return 1;
+}
+
+__setup("irqfixup", irqfixup_setup);
+
+static int __init irqpoll_setup(char *str)
+{
+	irqfixup = 2;
+	printk(KERN_WARNING "Misrouted IRQ fixup and polling support "
+				"enabled\n");
+	printk(KERN_WARNING "This may significantly impact system "
+				"performance\n");
+	return 1;
+}
+
+__setup("irqpoll", irqpoll_setup);
diff --git a/kernel/itimer.c b/kernel/itimer.c
index 1dc988e..a72cb0e 100644
--- a/kernel/itimer.c
+++ b/kernel/itimer.c
@@ -153,11 +153,15 @@
 
 	switch (which) {
 	case ITIMER_REAL:
+again:
 		spin_lock_irq(&tsk->sighand->siglock);
 		interval = tsk->signal->it_real_incr;
 		val = it_real_value(tsk->signal);
-		if (val)
-			del_timer_sync(&tsk->signal->real_timer);
+		/* We are sharing ->siglock with it_real_fn() */
+		if (try_to_del_timer_sync(&tsk->signal->real_timer) < 0) {
+			spin_unlock_irq(&tsk->sighand->siglock);
+			goto again;
+		}
 		tsk->signal->it_real_incr =
 			timeval_to_jiffies(&value->it_interval);
 		it_real_arm(tsk, timeval_to_jiffies(&value->it_value));
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 7843548..cdd4dcd 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -241,7 +241,7 @@
 
 static int kimage_crash_alloc(struct kimage **rimage, unsigned long entry,
 				unsigned long nr_segments,
-				struct kexec_segment *segments)
+				struct kexec_segment __user *segments)
 {
 	int result;
 	struct kimage *image;
@@ -650,7 +650,7 @@
 		}
 	}
 
-	return 0;
+	return NULL;
 }
 
 static struct page *kimage_alloc_page(struct kimage *image,
@@ -696,7 +696,7 @@
 		/* Allocate a page, if we run out of memory give up */
 		page = kimage_alloc_pages(gfp_mask, 0);
 		if (!page)
-			return 0;
+			return NULL;
 		/* If the page cannot be used file it away */
 		if (page_to_pfn(page) >
 				(KEXEC_SOURCE_MEMORY_LIMIT >> PAGE_SHIFT)) {
@@ -754,7 +754,7 @@
 	unsigned long maddr;
 	unsigned long ubytes, mbytes;
 	int result;
-	unsigned char *buf;
+	unsigned char __user *buf;
 
 	result = 0;
 	buf = segment->buf;
@@ -818,7 +818,7 @@
 	unsigned long maddr;
 	unsigned long ubytes, mbytes;
 	int result;
-	unsigned char *buf;
+	unsigned char __user *buf;
 
 	result = 0;
 	buf = segment->buf;
diff --git a/kernel/sched.c b/kernel/sched.c
index e2b0d3e..5f2182d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4166,6 +4166,14 @@
 	read_unlock(&tasklist_lock);
 }
 
+/**
+ * init_idle - set up an idle thread for a given CPU
+ * @idle: task in question
+ * @cpu: cpu the idle task belongs to
+ *
+ * NOTE: this function does not set the idle thread's NEED_RESCHED
+ * flag, to make booting more robust.
+ */
 void __devinit init_idle(task_t *idle, int cpu)
 {
 	runqueue_t *rq = cpu_rq(cpu);
@@ -4183,7 +4191,6 @@
 #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
 	idle->oncpu = 1;
 #endif
-	set_tsk_need_resched(idle);
 	spin_unlock_irqrestore(&rq->lock, flags);
 
 	/* Set the preempt count _outside_ the spinlocks! */
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 613b99a..a6329fa 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -354,7 +354,7 @@
  * the whole world.  Returns 0 if a pdflush thread was dispatched.  Returns
  * -1 if all pdflush threads were busy.
  */
-int wakeup_bdflush(long nr_pages)
+int wakeup_pdflush(long nr_pages)
 {
 	if (nr_pages == 0) {
 		struct writeback_state wbs;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 1fa312a..cfffe50 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -972,7 +972,7 @@
 		 * writeout.  So in laptop mode, write out the whole world.
 		 */
 		if (total_scanned > sc.swap_cluster_max + sc.swap_cluster_max/2) {
-			wakeup_bdflush(laptop_mode ? 0 : total_scanned);
+			wakeup_pdflush(laptop_mode ? 0 : total_scanned);
 			sc.may_writepage = 1;
 		}