Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
diff --git a/Makefile b/Makefile
index c2f78a5..c53ed56 100644
--- a/Makefile
+++ b/Makefile
@@ -436,12 +436,13 @@
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
+ifeq ($(KBUILD_EXTMOD),)
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include include/config/auto.conf.cmd
--include include/config/auto.conf
# To avoid any implicit rule to kick in, define an empty command
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
@@ -451,16 +452,27 @@
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
-ifeq ($(KBUILD_EXTMOD),)
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
- $(error kernel configuration not valid - run 'make prepare' in $(srctree) to update it)
-endif
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+ $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
+ echo; \
+ echo " ERROR: Kernel configuration is invalid."; \
+ echo " include/linux/autoconf.h or $@ are missing."; \
+ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
+ echo; \
+ /bin/false)
+
+endif # KBUILD_EXTMOD
else
# Dummy target needed, because used as prerequisite
include/config/auto.conf: ;
-endif
+endif # $(dot-config)
# The all: target is the default when no target is given on the
# command line.
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index d687a14..06ac899 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -393,7 +393,7 @@
state->bandwidth = bandwidth;
if (state->dst_type != DST_TYPE_IS_TERR)
- return 0;
+ return -EOPNOTSUPP;
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
@@ -462,7 +462,7 @@
state->symbol_rate = srate;
if (state->dst_type == DST_TYPE_IS_TERR) {
- return 0;
+ return -EOPNOTSUPP;
}
dprintk(verbose, DST_INFO, 1, "set symrate %u", srate);
srate /= 1000;
@@ -504,7 +504,7 @@
static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation)
{
if (state->dst_type != DST_TYPE_IS_CABLE)
- return 0;
+ return -EOPNOTSUPP;
state->modulation = modulation;
switch (modulation) {
@@ -1234,7 +1234,7 @@
goto error;
}
if (write_dst(state, data, len)) {
- dprintk(verbose, DST_INFO, 1, "Tring to recover.. ");
+ dprintk(verbose, DST_INFO, 1, "Trying to recover.. ");
if ((dst_error_recovery(state)) < 0) {
dprintk(verbose, DST_ERROR, 1, "Recovery Failed.");
goto error;
@@ -1328,15 +1328,13 @@
{
u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
- if (state->dst_type == DST_TYPE_IS_TERR)
- return 0;
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
paket[4] = state->tx_tuna[4];
paket[2] = state->tx_tuna[2];
paket[3] = state->tx_tuna[3];
paket[7] = dst_check_sum (paket, 7);
- dst_command(state, paket, 8);
-
- return 0;
+ return dst_command(state, paket, 8);
}
static int dst_get_tuna(struct dst_state *state)
@@ -1465,7 +1463,7 @@
u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
if (cmd->msg_len > 0 && cmd->msg_len < 5)
memcpy(&paket[3], cmd->msg, cmd->msg_len);
else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
@@ -1473,18 +1471,17 @@
else
return -EINVAL;
paket[7] = dst_check_sum(&paket[0], 7);
- dst_command(state, paket, 8);
- return 0;
+ return dst_command(state, paket, 8);
}
static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- int need_cmd;
+ int need_cmd, retval = 0;
struct dst_state *state = fe->demodulator_priv;
state->voltage = voltage;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
need_cmd = 0;
@@ -1506,9 +1503,9 @@
}
if (need_cmd)
- dst_tone_power_cmd(state);
+ retval = dst_tone_power_cmd(state);
- return 0;
+ return retval;
}
static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
@@ -1517,7 +1514,7 @@
state->tone = tone;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
switch (tone) {
case SEC_TONE_OFF:
@@ -1533,9 +1530,7 @@
default:
return -EINVAL;
}
- dst_tone_power_cmd(state);
-
- return 0;
+ return dst_tone_power_cmd(state);
}
static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
@@ -1543,7 +1538,7 @@
struct dst_state *state = fe->demodulator_priv;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
state->minicmd = minicmd;
switch (minicmd) {
case SEC_MINI_A:
@@ -1553,9 +1548,7 @@
state->tx_tuna[3] = 0xff;
break;
}
- dst_tone_power_cmd(state);
-
- return 0;
+ return dst_tone_power_cmd(state);
}
@@ -1608,28 +1601,31 @@
{
struct dst_state *state = fe->demodulator_priv;
- dst_get_signal(state);
+ int retval = dst_get_signal(state);
*strength = state->decode_strength;
- return 0;
+ return retval;
}
static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct dst_state *state = fe->demodulator_priv;
- dst_get_signal(state);
+ int retval = dst_get_signal(state);
*snr = state->decode_snr;
- return 0;
+ return retval;
}
static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
{
+ int retval = -EINVAL;
struct dst_state *state = fe->demodulator_priv;
if (p != NULL) {
- dst_set_freq(state, p->frequency);
+ retval = dst_set_freq(state, p->frequency);
+ if(retval != 0)
+ return retval;
dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
if (state->dst_type == DST_TYPE_IS_SAT) {
@@ -1647,10 +1643,10 @@
dst_set_symbolrate(state, p->u.qam.symbol_rate);
dst_set_modulation(state, p->u.qam.modulation);
}
- dst_write_tuna(fe);
+ retval = dst_write_tuna(fe);
}
- return 0;
+ return retval;
}
static int dst_tune_frontend(struct dvb_frontend* fe,
diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile
index 1105465..0b51828 100644
--- a/drivers/media/dvb/dvb-core/Makefile
+++ b/drivers/media/dvb/dvb-core/Makefile
@@ -2,8 +2,8 @@
# Makefile for the kernel DVB device drivers.
#
-dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
- dvb_ca_en50221.o dvb_frontend.o \
- dvb_net.o dvb_ringbuffer.o dvb_math.o
+dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
+ dvb_ca_en50221.o dvb_frontend.o \
+ dvb_net.o dvb_ringbuffer.o dvb_math.o
obj-$(CONFIG_DVB_CORE) += dvb-core.o
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index de3128a..220076b 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -350,5 +350,15 @@
help
Enter the I/O port of your Zoltrix radio card.
-endmenu
+config USB_DSBR
+ tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+endmenu
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index e95b680..cf55a18 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -20,5 +20,6 @@
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
+obj-$(CONFIG_USB_DSBR) += dsbr100.o
EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/video/dsbr100.c b/drivers/media/radio/dsbr100.c
similarity index 100%
rename from drivers/media/video/dsbr100.c
rename to drivers/media/radio/dsbr100.c
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index fe56862..732bf1e 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -449,18 +449,6 @@
source "drivers/media/video/em28xx/Kconfig"
-config USB_DSBR
- tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_V4L1 && EXPERIMENTAL
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 353d61c..e82e511 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -77,7 +77,6 @@
obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
-obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
@@ -91,6 +90,7 @@
obj-$(CONFIG_USB_IBMCAM) += usbvideo/
obj-$(CONFIG_USB_KONICAWC) += usbvideo/
obj-$(CONFIG_USB_VICAM) += usbvideo/
+obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/
obj-$(CONFIG_VIDEO_VIVI) += vivi.o
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index 9dddff4..b69ee11 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -21,7 +21,7 @@
#ifdef CONFIG_COMPAT
-
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_tuner32 {
compat_int_t tuner;
char name[32];
@@ -107,6 +107,7 @@
compat_caddr_t clips;
compat_int_t clipcount;
};
+#endif
static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
@@ -124,6 +125,7 @@
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* You get back everything except the clips... */
static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
{
@@ -138,6 +140,7 @@
return -EFAULT;
return 0;
}
+#endif
struct v4l2_clip32
{
@@ -490,6 +493,7 @@
return 0;
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_code32
{
char loadwhat[16]; /* name or tag of file being passed */
@@ -517,6 +521,8 @@
#define VIDIOCSFREQ32 _IOW('v',15, u32)
#define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32)
+#endif
+
/* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */
#define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4)
#define VIDIOC_G_FMT32 _IOWR ('V', 4, struct v4l2_format32)
@@ -537,6 +543,7 @@
#define VIDIOC_S_INPUT32 _IOWR ('V', 39, compat_int_t)
#define VIDIOC_TRY_FMT32 _IOWR ('V', 64, struct v4l2_format32)
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
enum {
MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip)
};
@@ -601,14 +608,17 @@
return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw);
}
+#endif
static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
union {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_tuner vt;
struct video_buffer vb;
struct video_window vw;
struct video_code vc;
+#endif
struct v4l2_format v2f;
struct v4l2_buffer v2b;
struct v4l2_framebuffer v2fb;
@@ -624,6 +634,7 @@
/* First, convert the command. */
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
@@ -631,6 +642,8 @@
case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
+ case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
+#endif
case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
@@ -647,10 +660,10 @@
case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break;
case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break;
- case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
};
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSTUNER:
case VIDIOCGTUNER:
err = get_video_tuner32(&karg.vt, up);
@@ -664,6 +677,7 @@
break;
case VIDIOCSFREQ:
+#endif
case VIDIOC_S_INPUT:
case VIDIOC_OVERLAY:
case VIDIOC_STREAMON:
@@ -717,18 +731,21 @@
compatible_arg = 0;
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGWIN:
case VIDIOCGFBUF:
case VIDIOCGFREQ:
+#endif
case VIDIOC_G_FBUF:
case VIDIOC_G_INPUT:
compatible_arg = 0;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSMICROCODE:
err = microcode32(&karg.vc, up);
compatible_arg = 0;
break;
+#endif
};
-
if(err)
goto out;
@@ -743,6 +760,7 @@
}
if(err == 0) {
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGTUNER:
err = put_video_tuner32(&karg.vt, up);
break;
@@ -754,7 +772,7 @@
case VIDIOCGFBUF:
err = put_video_buffer32(&karg.vb, up);
break;
-
+#endif
case VIDIOC_G_FBUF:
err = put_v4l2_framebuffer32(&karg.v2fb, up);
break;
@@ -792,7 +810,9 @@
err = put_v4l2_input32(&karg.v2i, up);
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGFREQ:
+#endif
case VIDIOC_G_INPUT:
err = put_user(((u32)karg.vx), (u32 __user *)up);
break;
@@ -810,6 +830,7 @@
return ret;
switch (cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSWIN32:
ret = do_set_window(file, cmd, arg);
break;
@@ -820,6 +841,7 @@
case VIDIOCSFBUF32:
case VIDIOCGFREQ32:
case VIDIOCSFREQ32:
+#endif
case VIDIOC_QUERYCAP:
case VIDIOC_ENUM_FMT:
case VIDIOC_G_FMT32:
@@ -851,6 +873,7 @@
ret = do_video_ioctl(file, cmd, arg);
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Little v, the video4linux ioctls (conflict?) */
case VIDIOCGCAP:
case VIDIOCGCHAN:
@@ -879,6 +902,7 @@
case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
break;
+#endif
default:
v4l_print_ioctl("compat_ioctl32", cmd);
}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 5c2036b..7bb7589 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -104,8 +104,8 @@
if (i2c_master_recv(client, buffer, 4) < 4)
return 0;
- return (buffer[0] << 24) | (buffer[1] << 16) |
- (buffer[2] << 8) | buffer[3];
+ return (buffer[3] << 24) | (buffer[2] << 16) |
+ (buffer[1] << 8) | buffer[0];
}
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 547cdbd..94c92ba 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1225,7 +1225,7 @@
struct v4l2_format *f = arg;
return cx8800_try_fmt(dev,fh,f);
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* --- streaming capture ------------------------------------- */
case VIDIOCGMBUF:
{
@@ -1584,7 +1584,7 @@
*id = 0;
return 0;
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSTUNER:
{
struct video_tuner *v = arg;
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index f2fd919..ed02ff8 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -961,10 +961,10 @@
/* setup the chip*/
msp34xxg_reset(client);
state->std = state->radio ? 0x40 : msp_standard;
- if (state->std != 1)
- goto unmute;
/* start autodetect */
msp_write_dem(client, 0x20, state->std);
+ if (state->std != 1)
+ goto unmute;
/* watch autodetect */
v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 697145e..8fdf710 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -30,7 +30,7 @@
config USB_PWC_DEBUG
bool "USB Philips Cameras verbose debug"
- depends USB_PWC
+ depends on USB_PWC
help
Say Y here in order to have the pwc driver generate verbose debugging
messages.
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 47d0d83..d470394 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -160,6 +160,7 @@
.poll = pwc_video_poll,
.mmap = pwc_video_mmap,
.ioctl = pwc_video_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
static struct video_device pwc_template = {
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 8656f24..2c171af 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -2087,7 +2087,7 @@
struct v4l2_format *f = arg;
return saa7134_try_fmt(dev,fh,f);
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index a167e17..d7eadc2 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -1027,10 +1027,11 @@
/* 70-79 */
/* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
+/* '+ 4' turns on the Low Noise Amplifier */
static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
- { 16 * 130.00 /*MHz*/, 0xce, 0x01, },
- { 16 * 364.50 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x08, },
+ { 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, },
+ { 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, },
+ { 16 * 999.99 , 0xce, 0x08 + 4, },
};
static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = {
@@ -1060,10 +1061,11 @@
/* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */
+/* '+ 4' turns on the Low Noise Amplifier */
static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = {
- { 16 * 146.25 /*MHz*/, 0xce, 0x01, },
- { 16 * 428.50 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x08, },
+ { 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, },
+ { 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, },
+ { 16 * 999.99 , 0xce, 0x08 + 4, },
};
static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = {
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index d83a2c8..d7c3fcb 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -599,6 +599,10 @@
dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err);
break;
}
+
+ pict->depth = ((fmt2->fmt.pix.bytesperline<<3)
+ + (fmt2->fmt.pix.width-1) )
+ /fmt2->fmt.pix.width;
pict->palette = pixelformat_to_palette(
fmt2->fmt.pix.pixelformat);
break;
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 2ecbeff..8d972ffd 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -202,7 +202,7 @@
/* ------------------------------------------------------------------ */
/* debug help functions */
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
static const char *v4l1_ioctls[] = {
[_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP",
[_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN",
@@ -301,7 +301,7 @@
#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
static const char *v4l2_int_ioctls[] = {
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
[_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES",
[_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS",
[_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM",
@@ -367,7 +367,7 @@
(_IOC_NR(cmd) < V4L2_INT_IOCTLS) ?
v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd);
break;
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case 'v':
printk("v4l1 ioctl %s, dir=%s (0x%08x)\n",
(_IOC_NR(cmd) < V4L1_IOCTLS) ?
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index 0fc90cd..88bf2af 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -760,7 +760,7 @@
ret=vfd->vidioc_overlay(file, fh, *i);
break;
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* --- streaming capture ------------------------------------- */
case VIDIOCGMBUF:
{
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 38bd0c1..841884a 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -986,7 +986,7 @@
file->f_flags & O_NONBLOCK));
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
{
struct vivi_fh *fh=priv;
@@ -1328,7 +1328,7 @@
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_streamon = vidioc_streamon,
.vidioc_streamoff = vidioc_streamoff,
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
.tvnorms = tvnorms,
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 06440a8..9bdd43a 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2425,7 +2425,7 @@
}
myri10ge_reset(mgp);
- myri10ge_dummy_rdma(mgp, mgp->tx.boundary != 4096);
+ myri10ge_dummy_rdma(mgp, 1);
/* Save configuration space to be restored if the
* nic resets due to a parity error */
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
index 643b6d0..56b8761 100644
--- a/drivers/s390/char/tape_class.c
+++ b/drivers/s390/char/tape_class.c
@@ -76,7 +76,7 @@
device,
"%s", tcd->device_name
);
- rc = PTR_ERR(tcd->class_device);
+ rc = IS_ERR(tcd->class_device) ? PTR_ERR(tcd->class_device) : 0;
if (rc)
goto fail_with_cdev;
rc = sysfs_create_link(
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 7a39e0b..6d91c2e 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -772,6 +772,7 @@
stsch(sch->schid, &sch->schib);
if (sch->schib.scsw.actl != 0 ||
+ (sch->schib.scsw.stctl & SCSW_STCTL_STATUS_PEND) ||
(cdev->private->irb.scsw.stctl & SCSW_STCTL_STATUS_PEND)) {
/*
* No final status yet or final status not yet delivered
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index a601242..9e3de0b 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -263,6 +263,9 @@
/* Abuse intparm for error reporting. */
if (IS_ERR(irb))
cdev->private->intparm = -EIO;
+ else if (irb->scsw.cc == 1)
+ /* Retry for deferred condition code. */
+ cdev->private->intparm = -EAGAIN;
else if ((irb->scsw.dstat !=
(DEV_STAT_CHN_END|DEV_STAT_DEV_END)) ||
(irb->scsw.cstat != 0)) {
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 19745a3..5e8afc8 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -567,8 +567,8 @@
present = 1;
}
- DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
- ap->id, pcs, present_mask);
+ DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n",
+ ap->id, pcs, present);
if (!present) {
ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
@@ -828,6 +828,7 @@
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich5_pata];
+ pinfo[i / 2].private_data = hpriv;
i++;
printk(" IDE IDE");
break;
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 386e5f2..16fc2dd 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5185,28 +5185,6 @@
iounmap(host_set->mmio_base);
}
-
-/**
- * ata_host_remove - Unregister SCSI host structure with upper layers
- * @ap: Port to unregister
- * @do_unregister: 1 if we fully unregister, 0 to just stop the port
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
-{
- struct Scsi_Host *sh = ap->host;
-
- DPRINTK("ENTER\n");
-
- if (do_unregister)
- scsi_remove_host(sh);
-
- ap->ops->port_stop(ap);
-}
-
/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
@@ -5532,8 +5510,11 @@
err_out:
for (i = 0; i < count; i++) {
- ata_host_remove(host_set->ports[i], 1);
- scsi_host_put(host_set->ports[i]->host);
+ struct ata_port *ap = host_set->ports[i];
+ if (ap) {
+ ap->ops->port_stop(ap);
+ scsi_host_put(ap->host);
+ }
}
err_free_ret:
kfree(host_set);
@@ -5558,7 +5539,7 @@
int i;
if (!ap->ops->error_handler)
- return;
+ goto skip_eh;
/* tell EH we're leaving & flush EH */
spin_lock_irqsave(ap->lock, flags);
@@ -5594,6 +5575,7 @@
cancel_delayed_work(&ap->hotplug_task);
flush_workqueue(ata_aux_wq);
+ skip_eh:
/* remove the associated SCSI host */
scsi_remove_host(ap->host);
}
@@ -5662,7 +5644,7 @@
DPRINTK("ENTER\n");
ap->ops->port_disable(ap);
- ata_host_remove(ap, 0);
+ ap->ops->port_stop(ap);
DPRINTK("EXIT\n");
return 1;
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 7ced41e..e92c31d 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2353,6 +2353,19 @@
ata_gen_ata_desc_sense(qc);
}
+ /* SCSI EH automatically locks door if sdev->locked is
+ * set. Sometimes door lock request continues to
+ * fail, for example, when no media is present. This
+ * creates a loop - SCSI EH issues door lock which
+ * fails and gets invoked again to acquire sense data
+ * for the failed command.
+ *
+ * If door lock fails, always clear sdev->locked to
+ * avoid this infinite loop.
+ */
+ if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+ qc->dev->sdev->locked = 0;
+
qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
qc->scsidone(cmd);
ata_qc_free(qc);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 2e0f4a4..3f368c7 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -1106,7 +1106,6 @@
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->mmio_base = port_base;
probe_ent->private_data = hpriv;
hpriv->host_base = host_base;
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index 43e3f56..a223cf4 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -168,16 +168,15 @@
set_cflag(COMMIT_Dirty, inode);
}
-static int
-jfs_get_blocks(struct inode *ip, sector_t lblock, unsigned long max_blocks,
- struct buffer_head *bh_result, int create)
+int jfs_get_block(struct inode *ip, sector_t lblock,
+ struct buffer_head *bh_result, int create)
{
s64 lblock64 = lblock;
int rc = 0;
xad_t xad;
s64 xaddr;
int xflag;
- s32 xlen = max_blocks;
+ s32 xlen = bh_result->b_size >> ip->i_blkbits;
/*
* Take appropriate lock on inode
@@ -188,7 +187,7 @@
IREAD_LOCK(ip);
if (((lblock64 << ip->i_sb->s_blocksize_bits) < ip->i_size) &&
- (!xtLookup(ip, lblock64, max_blocks, &xflag, &xaddr, &xlen, 0)) &&
+ (!xtLookup(ip, lblock64, xlen, &xflag, &xaddr, &xlen, 0)) &&
xaddr) {
if (xflag & XAD_NOTRECORDED) {
if (!create)
@@ -255,13 +254,6 @@
return rc;
}
-static int jfs_get_block(struct inode *ip, sector_t lblock,
- struct buffer_head *bh_result, int create)
-{
- return jfs_get_blocks(ip, lblock, bh_result->b_size >> ip->i_blkbits,
- bh_result, create);
-}
-
static int jfs_writepage(struct page *page, struct writeback_control *wbc)
{
return nobh_writepage(page, jfs_get_block, wbc);
diff --git a/fs/jfs/jfs_inode.h b/fs/jfs/jfs_inode.h
index b5c7da6..1fc48df 100644
--- a/fs/jfs/jfs_inode.h
+++ b/fs/jfs/jfs_inode.h
@@ -32,6 +32,7 @@
extern void jfs_free_zero_link(struct inode *);
extern struct dentry *jfs_get_parent(struct dentry *dentry);
extern void jfs_set_inode_flags(struct inode *);
+extern int jfs_get_block(struct inode *, sector_t, struct buffer_head *, int);
extern const struct address_space_operations jfs_aops;
extern struct inode_operations jfs_dir_inode_operations;
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 4f6cfeb..143bcd1 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -26,6 +26,7 @@
#include <linux/moduleparam.h>
#include <linux/kthread.h>
#include <linux/posix_acl.h>
+#include <linux/buffer_head.h>
#include <asm/uaccess.h>
#include <linux/seq_file.h>
@@ -298,7 +299,7 @@
break;
}
-#if defined(CONFIG_QUOTA)
+#ifdef CONFIG_QUOTA
case Opt_quota:
case Opt_usrquota:
*flag |= JFS_USRQUOTA;
@@ -597,7 +598,7 @@
if (sbi->flag & JFS_NOINTEGRITY)
seq_puts(seq, ",nointegrity");
-#if defined(CONFIG_QUOTA)
+#ifdef CONFIG_QUOTA
if (sbi->flag & JFS_USRQUOTA)
seq_puts(seq, ",usrquota");
@@ -608,6 +609,113 @@
return 0;
}
+#ifdef CONFIG_QUOTA
+
+/* Read data from quotafile - avoid pagecache and such because we cannot afford
+ * acquiring the locks... As quota files are never truncated and quota code
+ * itself serializes the operations (and noone else should touch the files)
+ * we don't have to be afraid of races */
+static ssize_t jfs_quota_read(struct super_block *sb, int type, char *data,
+ size_t len, loff_t off)
+{
+ struct inode *inode = sb_dqopt(sb)->files[type];
+ sector_t blk = off >> sb->s_blocksize_bits;
+ int err = 0;
+ int offset = off & (sb->s_blocksize - 1);
+ int tocopy;
+ size_t toread;
+ struct buffer_head tmp_bh;
+ struct buffer_head *bh;
+ loff_t i_size = i_size_read(inode);
+
+ if (off > i_size)
+ return 0;
+ if (off+len > i_size)
+ len = i_size-off;
+ toread = len;
+ while (toread > 0) {
+ tocopy = sb->s_blocksize - offset < toread ?
+ sb->s_blocksize - offset : toread;
+
+ tmp_bh.b_state = 0;
+ tmp_bh.b_size = 1 << inode->i_blkbits;
+ err = jfs_get_block(inode, blk, &tmp_bh, 0);
+ if (err)
+ return err;
+ if (!buffer_mapped(&tmp_bh)) /* A hole? */
+ memset(data, 0, tocopy);
+ else {
+ bh = sb_bread(sb, tmp_bh.b_blocknr);
+ if (!bh)
+ return -EIO;
+ memcpy(data, bh->b_data+offset, tocopy);
+ brelse(bh);
+ }
+ offset = 0;
+ toread -= tocopy;
+ data += tocopy;
+ blk++;
+ }
+ return len;
+}
+
+/* Write to quotafile */
+static ssize_t jfs_quota_write(struct super_block *sb, int type,
+ const char *data, size_t len, loff_t off)
+{
+ struct inode *inode = sb_dqopt(sb)->files[type];
+ sector_t blk = off >> sb->s_blocksize_bits;
+ int err = 0;
+ int offset = off & (sb->s_blocksize - 1);
+ int tocopy;
+ size_t towrite = len;
+ struct buffer_head tmp_bh;
+ struct buffer_head *bh;
+
+ mutex_lock(&inode->i_mutex);
+ while (towrite > 0) {
+ tocopy = sb->s_blocksize - offset < towrite ?
+ sb->s_blocksize - offset : towrite;
+
+ tmp_bh.b_state = 0;
+ tmp_bh.b_size = 1 << inode->i_blkbits;
+ err = jfs_get_block(inode, blk, &tmp_bh, 1);
+ if (err)
+ goto out;
+ if (offset || tocopy != sb->s_blocksize)
+ bh = sb_bread(sb, tmp_bh.b_blocknr);
+ else
+ bh = sb_getblk(sb, tmp_bh.b_blocknr);
+ if (!bh) {
+ err = -EIO;
+ goto out;
+ }
+ lock_buffer(bh);
+ memcpy(bh->b_data+offset, data, tocopy);
+ flush_dcache_page(bh->b_page);
+ set_buffer_uptodate(bh);
+ mark_buffer_dirty(bh);
+ unlock_buffer(bh);
+ brelse(bh);
+ offset = 0;
+ towrite -= tocopy;
+ data += tocopy;
+ blk++;
+ }
+out:
+ if (len == towrite)
+ return err;
+ if (inode->i_size < off+len-towrite)
+ i_size_write(inode, off+len-towrite);
+ inode->i_version++;
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ mark_inode_dirty(inode);
+ mutex_unlock(&inode->i_mutex);
+ return len - towrite;
+}
+
+#endif
+
static struct super_operations jfs_super_operations = {
.alloc_inode = jfs_alloc_inode,
.destroy_inode = jfs_destroy_inode,
@@ -621,7 +729,11 @@
.unlockfs = jfs_unlockfs,
.statfs = jfs_statfs,
.remount_fs = jfs_remount,
- .show_options = jfs_show_options
+ .show_options = jfs_show_options,
+#ifdef CONFIG_QUOTA
+ .quota_read = jfs_quota_read,
+ .quota_write = jfs_quota_write,
+#endif
};
static struct export_operations jfs_export_operations = {
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index f866532..600d61d 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -16,7 +16,7 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
#include <linux/videodev.h>
#else
#include <linux/videodev2.h>
diff --git a/net/core/wireless.c b/net/core/wireless.c
index d2bc72d..de0bde4 100644
--- a/net/core/wireless.c
+++ b/net/core/wireless.c
@@ -82,6 +82,7 @@
#include <linux/init.h> /* for __init */
#include <linux/if_arp.h> /* ARPHRD_ETHER */
#include <linux/etherdevice.h> /* compare_ether_addr */
+#include <linux/interrupt.h>
#include <linux/wireless.h> /* Pretty obvious */
#include <net/iw_handler.h> /* New driver API */
@@ -1842,6 +1843,18 @@
*/
#ifdef WE_EVENT_RTNETLINK
+static struct sk_buff_head wireless_nlevent_queue;
+
+static void wireless_nlevent_process(unsigned long data)
+{
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&wireless_nlevent_queue)))
+ netlink_broadcast(rtnl, skb, 0, RTNLGRP_LINK, GFP_ATOMIC);
+}
+
+static DECLARE_TASKLET(wireless_nlevent_tasklet, wireless_nlevent_process, 0);
+
/* ---------------------------------------------------------------- */
/*
* Fill a rtnetlink message with our event data.
@@ -1904,8 +1917,17 @@
return;
}
NETLINK_CB(skb).dst_group = RTNLGRP_LINK;
- netlink_broadcast(rtnl, skb, 0, RTNLGRP_LINK, GFP_ATOMIC);
+ skb_queue_tail(&wireless_nlevent_queue, skb);
+ tasklet_schedule(&wireless_nlevent_tasklet);
}
+
+static int __init wireless_nlevent_init(void)
+{
+ skb_queue_head_init(&wireless_nlevent_queue);
+ return 0;
+}
+
+subsys_initcall(wireless_nlevent_init);
#endif /* WE_EVENT_RTNETLINK */
/* ---------------------------------------------------------------- */
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index f4980ca..1b7c3df 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -31,7 +31,7 @@
For more information on this driver and the degree of support for
the different card models please check:
- <http://sourceforge.net/projects/emu10k1/>
+ <http://sourceforge.net/projects/emu10k1/>
It is now possible to load dsp microcode patches into the EMU10K1
chip. These patches are used to implement real time sound
@@ -140,7 +140,7 @@
system support" and "Sysctl support", and after the /proc file
system has been mounted, executing the command
- command what is enabled
+ command what is enabled
echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
@@ -838,7 +838,7 @@
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C
+ depends on SOUND_PRIME && I2C && VIDEO_V4L1
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index d7ad32f..e49c0fe 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -16,16 +16,16 @@
will be called snd-ad1889.
config SND_ALS300
- tristate "Avance Logic ALS300/ALS300+"
- depends on SND
- select SND_PCM
- select SND_AC97_CODEC
- select SND_OPL3_LIB
- help
- Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
+ tristate "Avance Logic ALS300/ALS300+"
+ depends on SND
+ select SND_PCM
+ select SND_AC97_CODEC
+ select SND_OPL3_LIB
+ help
+ Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
- To compile this driver as a module, choose M here: the module
- will be called snd-als300
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als300
config SND_ALS4000
tristate "Avance Logic ALS4000"
@@ -78,49 +78,49 @@
will be called snd-atiixp-modem.
config SND_AU8810
- tristate "Aureal Advantage"
- depends on SND
+ tristate "Aureal Advantage"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8810.
-
+
config SND_AU8820
- tristate "Aureal Vortex"
- depends on SND
+ tristate "Aureal Vortex"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex soundcards.
- Supported features: Hardware Mixer and SRC. For more info, email
- the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer and SRC. For more info, email
+ the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8820.
-
+
config SND_AU8830
- tristate "Aureal Vortex 2"
- depends on SND
+ tristate "Aureal Vortex 2"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex 2 soundcards.
- Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
-
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
@@ -135,10 +135,10 @@
will be called snd-azt3328.
config SND_BT87X
- tristate "Bt87x Audio Capture"
- depends on SND
+ tristate "Bt87x Audio Capture"
+ depends on SND
select SND_PCM
- help
+ help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
<file:Documentation/sound/alsa/Bt87x.txt>.
@@ -209,7 +209,7 @@
config SND_CS46XX_NEW_DSP
bool "Cirrus Logic (Sound Fusion) New DSP support"
depends on SND_CS46XX
- default y
+ default y
help
Say Y here to use a new DSP image for SPDIF and dual codecs.
@@ -225,7 +225,7 @@
referred to as NS CS5535 IO or AMD CS5535 IO companion in
various literature. This driver also supports the CS5536 audio
device. However, for both chips, on certain boards, you may
- need to use ac97_quirk=hp_only if your board has physically
+ need to use ac97_quirk=hp_only if your board has physically
mapped headphone out to master output. If that works for you,
send lspci -vvv output to the mailing list so that your board
can be identified in the quirks list.
@@ -468,11 +468,13 @@
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
Forte SF256-PCS-02) into the snd-fm801 driver.
+ This will enable support for the old V4L1 API.
+
config SND_FM801_TEA575X
tristate
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
- select VIDEO_DEV
+ select VIDEO_V4L1
config SND_HDA_INTEL
tristate "Intel HD Audio"
diff --git a/usr/Makefile b/usr/Makefile
index e938242..5b31c0b 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -35,6 +35,9 @@
cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
targets := initramfs_data.cpio.gz
+# do not try to update files included in initramfs
+$(deps_initramfs): ;
+
$(deps_initramfs): klibcdirs
# We rebuild initramfs_data.cpio.gz if:
# 1) Any included file is newer then initramfs_data.cpio.gz
