mmc: replace printk with appropriate display macro
All the files using printk function for displaying kernel messages
in the mmc driver have been replaced with corresponding macro.
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index a5bf60e..211a495 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -117,7 +117,7 @@
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- printk(KERN_DEBUG "%s: fallback to PIO for data "
+ pr_debug("%s: fallback to PIO for data "
"at 0x%p size %d\n",
mmc_hostname(host->mmc),
host->pio_ptr, host->pio_size);
@@ -471,7 +471,7 @@
if (mrq->data)
err_status = mvsd_finish_data(host, mrq->data, err_status);
if (err_status) {
- printk(KERN_ERR "%s: unhandled error status %#04x\n",
+ pr_err("%s: unhandled error status %#04x\n",
mmc_hostname(host->mmc), err_status);
cmd->error = -ENOMSG;
}
@@ -489,7 +489,7 @@
if (irq_handled)
return IRQ_HANDLED;
- printk(KERN_ERR "%s: unhandled interrupt status=0x%04x en=0x%04x "
+ pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
"pio=%d\n", mmc_hostname(host->mmc), intr_status,
host->intr_en, host->pio_size);
return IRQ_NONE;
@@ -505,9 +505,9 @@
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware interrupt.\n",
+ pr_err("%s: Timeout waiting for hardware interrupt.\n",
mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: hw_state=0x%04x, intr_status=0x%04x "
+ pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
"intr_en=0x%04x\n", mmc_hostname(host->mmc),
mvsd_read(MVSD_HW_STATE),
mvsd_read(MVSD_NOR_INTR_STATUS),
@@ -762,7 +762,7 @@
ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host);
if (ret) {
- printk(KERN_ERR "%s: cannot assign irq %d\n", DRIVER_NAME, irq);
+ pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
goto out;
} else
host->irq = irq;
@@ -802,7 +802,7 @@
if (ret)
goto out;
- printk(KERN_NOTICE "%s: %s driver initialized, ",
+ pr_notice("%s: %s driver initialized, ",
mmc_hostname(mmc), DRIVER_NAME);
if (host->gpio_card_detect)
printk("using GPIO %d for card detection\n",
