[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components
The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files
Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ebf294d..3b3a7db 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,11 +1,9 @@
/* linux/arch/arm/mach-s3c2410/pm.c
*
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX Power Manager (Suspend-To-RAM) support
- *
- * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,640 +18,139 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Parts based on arch/arm/mach-pxa/pm.c
- *
- * Thanks to Dimitry Andric for debugging
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/sysdev.h>
-#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
+#include <asm/mach-types.h>
+
#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <asm/arch/h1940.h>
-#include <asm/mach/time.h>
-
-#include "pm.h"
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-#define PFX "s3c24xx-pm: "
-
-static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C2410_LOCKTIME),
- SAVE_ITEM(S3C2410_CLKCON),
-
- /* we restore the timings here, with the proviso that the board
- * brings the system up in an slower, or equal frequency setting
- * to the original system.
- *
- * if we cannot guarantee this, then things are going to go very
- * wrong here, as we modify the refresh and both pll settings.
- */
-
- SAVE_ITEM(S3C2410_BWSCON),
- SAVE_ITEM(S3C2410_BANKCON0),
- SAVE_ITEM(S3C2410_BANKCON1),
- SAVE_ITEM(S3C2410_BANKCON2),
- SAVE_ITEM(S3C2410_BANKCON3),
- SAVE_ITEM(S3C2410_BANKCON4),
- SAVE_ITEM(S3C2410_BANKCON5),
-
- SAVE_ITEM(S3C2410_CLKDIVN),
- SAVE_ITEM(S3C2410_MPLLCON),
- SAVE_ITEM(S3C2410_UPLLCON),
- SAVE_ITEM(S3C2410_CLKSLOW),
- SAVE_ITEM(S3C2410_REFRESH),
-};
-
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
-
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
-
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
-
- SAVE_ITEM(S3C2410_DCLKCON),
-};
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
#ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
- SAVE_ITEM((va) + S3C2410_ULCON), \
- SAVE_ITEM((va) + S3C2410_UCON), \
- SAVE_ITEM((va) + S3C2410_UFCON), \
- SAVE_ITEM((va) + S3C2410_UMCON), \
- SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
- SAVE_UART(S3C24XX_VA_UART0),
- SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
- SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
- unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
- /* re-start uart clocks */
- tmp |= S3C2410_CLKCON_UART0;
- tmp |= S3C2410_CLKCON_UART1;
- tmp |= S3C2410_CLKCON_UART2;
-
- __raw_writel(tmp, S3C2410_CLKCON);
- udelay(10);
-}
-
+extern void pm_dbg(const char *fmt, ...);
#define DBG(fmt...) pm_dbg(fmt)
#else
#define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
#endif
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size; /* size needed for the crc block */
-static u32 *crcs; /* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+static void s3c2410_pm_prepare(void)
{
- while (ptr != NULL) {
- if (ptr->child != NULL)
- s3c2410_pm_run_res(ptr->child, fn, arg);
+ /* ensure at least GSTATUS3 has the resume address */
- if ((ptr->flags & IORESOURCE_MEM) &&
- strcmp(ptr->name, "System RAM") == 0) {
- DBG("Found system RAM at %08lx..%08lx\n",
- ptr->start, ptr->end);
- arg = (fn)(ptr, arg);
- }
+ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
- ptr = ptr->sibling;
- }
-}
+ DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
- s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
+ if (machine_is_h1940()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
- u32 size = (u32)(res->end - res->start)+1;
+ /* generate check for the bootloader to check on resume */
- size += CHECK_CHUNKSIZE-1;
- size /= CHECK_CHUNKSIZE;
+ for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+ calc += __raw_readl(base+ptr);
- DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
- *val += size * sizeof(u32);
- return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
-{
- crc_size = 0;
-
- s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
-
- DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
-
- crcs = kmalloc(crc_size+4, GFP_KERNEL);
- if (crcs == NULL)
- printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
- unsigned long addr, left;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- *val = crc32_le(~0, phys_to_virt(addr), left);
- val++;
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- return val;
+ /* the RX3715 uses similar code and the same H1940 and the
+ * same offsets for resume and checksum pointers */
+
+ if (machine_is_rx3715()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
+
+ /* generate check for the bootloader to check on resume */
+
+ for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+ calc += __raw_readl(base+ptr);
+
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+ }
+
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+
}
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
+static int s3c2410_pm_resume(struct sys_device *dev)
{
- if (crcs != NULL)
- s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
+ unsigned long tmp;
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
+ /* unset the return-from-sleep flag, to ensure reset */
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
- if ((what+whatsz) < ptr)
- return 0;
+ tmp = __raw_readl(S3C2410_GSTATUS2);
+ tmp &= S3C2410_GSTATUS2_OFFRESET;
+ __raw_writel(tmp, S3C2410_GSTATUS2);
- if (what > (ptr+size))
- return 0;
-
- return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
- void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
- unsigned long addr;
- unsigned long left;
- void *ptr;
- u32 calc;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- ptr = phys_to_virt(addr);
-
- if (in_region(ptr, left, crcs, crc_size)) {
- DBG("skipping %08lx, has crc block in\n", addr);
- goto skip_check;
- }
-
- if (in_region(ptr, left, save_at, 32*4 )) {
- DBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
- /* calculate and check the checksum */
-
- calc = crc32_le(~0, ptr, left);
- if (calc != *val) {
- printk(KERN_ERR PFX "Restore CRC error at "
- "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
- DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
- addr, calc, *val);
- }
-
- skip_check:
- val++;
- }
-
- return val;
-}
-
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
- if (crcs != NULL) {
- s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
- kfree(crcs);
- crcs = NULL;
- }
-}
-
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store() do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
- DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
-
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
-{
- int i;
-
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if ((which) & (1L<<i)) {
- DBG("IRQ %d asserted at resume\n", start+i);
- }
- }
-}
-
-/* s3c2410_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
- unsigned long irqstate;
- unsigned long pinstate;
- int irq = s3c2410_gpio_getirq(pin);
-
- if (irqoffs < 4)
- irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
- else
- irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
- pinstate = s3c2410_gpio_getcfg(pin);
-
- if (!irqstate) {
- if (pinstate == S3C2410_GPIO_IRQ)
- DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
- } else {
- if (pinstate == S3C2410_GPIO_IRQ) {
- DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
- s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
- }
- }
-}
-
-/* s3c2410_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-static void s3c2410_pm_configure_extint(void)
-{
- int pin;
-
- /* for each of the external interrupts (EINT0..EINT15) we
- * need to check wether it is an external interrupt source,
- * and then configure it as an input if it is not
- */
-
- for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
- }
-
- for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
- }
-}
-
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
-{
- unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c2410_pm_debug_init();
-
- DBG("s3c2410_pm_enter(%d)\n", state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
- return -EINVAL;
- }
-
- if (state != PM_SUSPEND_MEM) {
- printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
- printk(KERN_ERR PFX "Aborting sleep\n");
- return -EINVAL;
- }
-
- /* prepare check area if configured */
-
- s3c2410_pm_check_prepare();
-
- /* store the physical address of the register recovery block */
-
- s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
- DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
- /* set the irq configuration for wake */
-
- s3c2410_pm_configure_extint();
-
- DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
- /* call cpu specific preperation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c2410_pm_check_store();
-
- /* send the cpu to sleep... */
-
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-
- /* s3c2410_cpu_save will also act as our return point from when
- * we resume as it saves its own register state, so use the return
- * code to differentiate return from save and return from sleep */
-
- if (s3c2410_cpu_save(regs_save) == 0) {
- flush_cache_all();
- pm_cpu_sleep();
- }
-
- /* restore the cpu state */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-
- s3c2410_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-
- DBG("post sleep, preparing to return\n");
-
- s3c2410_pm_check_restore();
-
- /* ok, let's return from sleep */
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- DBG("S3C2410 PM Resume (post-restore)\n");
return 0;
}
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int s3c2410_pm_prepare(suspend_state_t state)
+static int s3c2410_pm_add(struct sys_device *dev)
{
+ pm_cpu_prep = s3c2410_pm_prepare;
+ pm_cpu_sleep = s3c2410_cpu_suspend;
+
return 0;
}
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int s3c2410_pm_finish(suspend_state_t state)
-{
- return 0;
-}
-
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static struct pm_ops s3c2410_pm_ops = {
- .pm_disk_mode = PM_DISK_FIRMWARE,
- .prepare = s3c2410_pm_prepare,
- .enter = s3c2410_pm_enter,
- .finish = s3c2410_pm_finish,
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
};
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
+/* register ourselves */
-int __init s3c2410_pm_init(void)
+static int __init s3c2410_pm_drvinit(void)
{
- printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
- pm_set_ops(&s3c2410_pm_ops);
- return 0;
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
}
+
+arch_initcall(s3c2410_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct sysdev_driver s3c2440_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2442)
+static struct sysdev_driver s3c2442_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
