[SCSI] sas: add support for enclosure and bad ID rphy attributes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 2055429..eab5c7c 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2005 Dell Inc.
+ * Copyright (C) 2005-2006 Dell Inc.
* Released under GPL v2.
*
* Serial Attached SCSI (SAS) transport class.
@@ -38,7 +38,7 @@
#define SAS_HOST_ATTRS 0
#define SAS_PORT_ATTRS 17
-#define SAS_RPORT_ATTRS 5
+#define SAS_RPORT_ATTRS 7
struct sas_internal {
struct scsi_transport_template t;
@@ -533,6 +533,53 @@
static SAS_CLASS_DEVICE_ATTR(rphy, device_type, S_IRUGO,
show_sas_rphy_device_type, NULL);
+static ssize_t
+show_sas_rphy_enclosure_identifier(struct class_device *cdev, char *buf)
+{
+ struct sas_rphy *rphy = transport_class_to_rphy(cdev);
+ struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+ u64 identifier;
+ int error;
+
+ /*
+ * Only devices behind an expander are supported, because the
+ * enclosure identifier is a SMP feature.
+ */
+ if (phy->local_attached)
+ return -EINVAL;
+
+ error = i->f->get_enclosure_identifier(rphy, &identifier);
+ if (error)
+ return error;
+ return sprintf(buf, "0x%llx\n", (unsigned long long)identifier);
+}
+
+static SAS_CLASS_DEVICE_ATTR(rphy, enclosure_identifier, S_IRUGO,
+ show_sas_rphy_enclosure_identifier, NULL);
+
+static ssize_t
+show_sas_rphy_bay_identifier(struct class_device *cdev, char *buf)
+{
+ struct sas_rphy *rphy = transport_class_to_rphy(cdev);
+ struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+ int val;
+
+ if (phy->local_attached)
+ return -EINVAL;
+
+ val = i->f->get_bay_identifier(rphy);
+ if (val < 0)
+ return val;
+ return sprintf(buf, "%d\n", val);
+}
+
+static SAS_CLASS_DEVICE_ATTR(rphy, bay_identifier, S_IRUGO,
+ show_sas_rphy_bay_identifier, NULL);
+
sas_rphy_protocol_attr(identify.initiator_port_protocols,
initiator_port_protocols);
sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols);
@@ -845,6 +892,8 @@
SETUP_RPORT_ATTRIBUTE(rphy_device_type);
SETUP_RPORT_ATTRIBUTE(rphy_sas_address);
SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier);
+ SETUP_RPORT_ATTRIBUTE(rphy_enclosure_identifier);
+ SETUP_RPORT_ATTRIBUTE(rphy_bay_identifier);
i->rphy_attrs[count] = NULL;
return &i->t;
