Merge branch 'master' of /home/cbou/linux-2.6
Conflicts:
drivers/power/Kconfig
drivers/power/Makefile
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index a8686e5..c6cd495 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@
charge when battery considered full/empty at given conditions (temperature,
age)". I.e. these attributes represents real thresholds, not design values.
+CHARGE_COUNTER - the current charge counter (in µAh). This could easily
+be negative; there is no empty or full value. It is only useful for
+relative, time-based measurements.
+
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 4d17d38..9ce5585 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,13 @@
help
Say Y to enable support for the battery on the OLPC laptop.
+config BATTERY_TOSA
+ tristate "Sharp SL-6000 (tosa) battery"
+ depends on MACH_TOSA && MFD_TC6393XB
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-6000 (tosa) models.
+
config BATTERY_PALMTX
tristate "Palm T|X battery"
depends on MACH_PALMTX
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6f43a54..4706bf8 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,4 +20,5 @@
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index ab1e828..32570af 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -19,7 +19,7 @@
#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
-#define EC_BAT_ACR 0x12
+#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */
#define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */
#define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */
#define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */
@@ -84,6 +84,119 @@
.get_property = olpc_ac_get_prop,
};
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+ if (olpc_platform_info.ecver > 0x44) {
+ if (ec_byte & BAT_STAT_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ec_byte & BAT_STAT_DISCHARGING)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* er,... */
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ /* Older EC didn't report charge/discharge bits */
+ if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* Not _necessarily_ true but EC doesn't tell all yet */
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte) {
+ case 0:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+
+ case BAT_ERR_OVERTEMP:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+
+ case BAT_ERR_OVERVOLTAGE:
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+
+ case BAT_ERR_INFOFAIL:
+ case BAT_ERR_OUT_OF_CONTROL:
+ case BAT_ERR_ID_FAIL:
+ case BAT_ERR_ACR_FAIL:
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+
+ default:
+ /* Eep. We don't know this failure code */
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte >> 4) {
+ case 1:
+ val->strval = "Gold Peak";
+ break;
+ case 2:
+ val->strval = "BYD";
+ break;
+ default:
+ val->strval = "Unknown";
+ break;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte & 0xf) {
+ case 1:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ break;
+ case 2:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ break;
+ }
+
+ return ret;
+}
+
/*********************************************************************
* Battery properties
*********************************************************************/
@@ -94,6 +207,7 @@
int ret = 0;
int16_t ec_word;
uint8_t ec_byte;
+ uint64_t ser_buf;
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
if (ret)
@@ -110,25 +224,10 @@
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
- if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
- val->intval = POWER_SUPPLY_STATUS_CHARGING;
- else if (ec_byte & BAT_STAT_DISCHARGING)
- val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_STATUS_FULL;
- else /* er,... */
- val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
- } else {
- /* Older EC didn't report charge/discharge bits */
- if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
- val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_STATUS_FULL;
- else /* Not _necessarily_ true but EC doesn't tell all yet */
- val->intval = POWER_SUPPLY_STATUS_CHARGING;
- break;
- }
+ ret = olpc_bat_get_status(val, ec_byte);
+ if (ret)
+ return ret;
+ break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ec_byte & BAT_STAT_PRESENT);
break;
@@ -137,72 +236,21 @@
if (ec_byte & BAT_STAT_DESTROY)
val->intval = POWER_SUPPLY_HEALTH_DEAD;
else {
- ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ ret = olpc_bat_get_health(val);
if (ret)
return ret;
-
- switch (ec_byte) {
- case 0:
- val->intval = POWER_SUPPLY_HEALTH_GOOD;
- break;
-
- case BAT_ERR_OVERTEMP:
- val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
- break;
-
- case BAT_ERR_OVERVOLTAGE:
- val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- break;
-
- case BAT_ERR_INFOFAIL:
- case BAT_ERR_OUT_OF_CONTROL:
- case BAT_ERR_ID_FAIL:
- case BAT_ERR_ACR_FAIL:
- val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
- break;
-
- default:
- /* Eep. We don't know this failure code */
- return -EIO;
- }
}
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
- ec_byte = BAT_ADDR_MFR_TYPE;
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ ret = olpc_bat_get_mfr(val);
if (ret)
return ret;
-
- switch (ec_byte >> 4) {
- case 1:
- val->strval = "Gold Peak";
- break;
- case 2:
- val->strval = "BYD";
- break;
- default:
- val->strval = "Unknown";
- break;
- }
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- ec_byte = BAT_ADDR_MFR_TYPE;
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ ret = olpc_bat_get_tech(val);
if (ret)
return ret;
-
- switch (ec_byte & 0xf) {
- case 1:
- val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
- break;
- case 2:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
- break;
- default:
- val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
- break;
- }
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
@@ -241,6 +289,22 @@
ec_word = be16_to_cpu(ec_word);
val->intval = ec_word * 100 / 256;
break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ ec_word = be16_to_cpu(ec_word);
+ val->intval = ec_word * 6250 / 15;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+ if (ret)
+ return ret;
+
+ sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+ val->strval = bat_serial;
+ break;
default:
ret = -EINVAL;
break;
@@ -260,6 +324,50 @@
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START 0x20
+#define EEPROM_END 0x80
+#define EEPROM_SIZE (EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+ uint8_t ec_byte;
+ int ret, end;
+
+ if (off >= EEPROM_SIZE)
+ return 0;
+ if (off + count > EEPROM_SIZE)
+ count = EEPROM_SIZE - off;
+
+ end = EEPROM_START + off + count;
+ for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+ &buf[ec_byte - EEPROM_START], 1);
+ if (ret) {
+ printk(KERN_ERR "olpc-battery: EC command "
+ "EC_BAT_EEPROM @ 0x%x failed -"
+ " %d!\n", ec_byte, ret);
+ return -EIO;
+ }
+ }
+
+ return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = 0,
+ .read = olpc_bat_eeprom_read,
};
/*********************************************************************
@@ -290,8 +398,14 @@
if (!olpc_platform_info.ecver)
return -ENXIO;
- if (olpc_platform_info.ecver < 0x43) {
- printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+ /*
+ * We've seen a number of EC protocol changes; this driver requires
+ * the latest EC protocol, supported by 0x44 and above.
+ */
+ if (olpc_platform_info.ecver < 0x44) {
+ printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+ "battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
@@ -315,8 +429,14 @@
if (ret)
goto battery_failed;
+ ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+ if (ret)
+ goto eeprom_failed;
+
goto success;
+eeprom_failed:
+ power_supply_unregister(&olpc_bat);
battery_failed:
power_supply_unregister(&olpc_ac);
ac_failed:
@@ -327,6 +447,7 @@
static void __exit olpc_bat_exit(void)
{
+ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 49215da..fe2aeb1 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@
POWER_SUPPLY_ATTR(charge_empty),
POWER_SUPPLY_ATTR(charge_now),
POWER_SUPPLY_ATTR(charge_avg),
+ POWER_SUPPLY_ATTR(charge_counter),
POWER_SUPPLY_ATTR(energy_full_design),
POWER_SUPPLY_ATTR(energy_empty_design),
POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
new file mode 100644
index 0000000..bf664fb
--- /dev/null
+++ b/drivers/power/tosa_battery.c
@@ -0,0 +1,486 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+ int status;
+ struct power_supply psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct tosa_bat *bat);
+ int gpio_full;
+ int gpio_charge_off;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ bat->adc_bat);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ bat->adc_temp);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = tosa_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = tosa_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+ return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+ int old;
+ struct power_supply *psy = &bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = tosa_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+ tosa_bat_update(&tosa_bat_main);
+ tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ .use_for_apm = 1,
+ },
+
+ .gpio_full = TOSA_GPIO_BAT0_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT0_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "jacket-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ },
+
+ .is_present = tosa_jacket_bat_is_present,
+ .gpio_full = TOSA_GPIO_BAT1_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT1_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+
+ .psy = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_bu_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_bu_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ },
+
+ .gpio_full = -1,
+ .gpio_charge_off = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+ .adc_bat = WM97XX_AUX_ID4,
+ .adc_bat_divider = 1266,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct {
+ int gpio;
+ char *name;
+ bool output;
+ int value;
+} gpios[] = {
+ { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 },
+ { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 },
+ { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 },
+ { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 },
+ { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 },
+ { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 },
+ { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 },
+ { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 },
+ { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 },
+ { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 },
+ { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 },
+ { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 },
+ { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* flush all pending status updates */
+ flush_scheduled_work();
+ return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+ int ret;
+ int i;
+
+ if (!machine_is_tosa())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ ret = gpio_request(gpios[i].gpio, gpios[i].name);
+ if (ret) {
+ i--;
+ goto err_gpio;
+ }
+
+ if (gpios[i].output)
+ ret = gpio_direction_output(gpios[i].gpio,
+ gpios[i].value);
+ else
+ ret = gpio_direction_input(gpios[i].gpio);
+
+ if (ret)
+ goto err_gpio;
+ }
+
+ mutex_init(&tosa_bat_main.work_lock);
+ mutex_init(&tosa_bat_jacket.work_lock);
+
+ INIT_WORK(&bat_work, tosa_bat_work);
+
+ ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+ if (ret)
+ goto err_psy_reg_main;
+ ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+ if (ret)
+ goto err_psy_reg_jacket;
+ ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+ if (ret)
+ goto err_psy_reg_bu;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &tosa_bat_main);
+ if (ret)
+ goto err_req_main;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket full", &tosa_bat_jacket);
+ if (ret)
+ goto err_req_jacket;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket detect", &tosa_bat_jacket);
+ if (!ret) {
+ schedule_work(&bat_work);
+ return 0;
+ }
+
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+ power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+ power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in tosa_bat_remove */
+ flush_scheduled_work();
+
+ i--;
+err_gpio:
+ for (; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+ int i;
+
+ free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+ power_supply_unregister(&tosa_bat_bu.psy);
+ power_supply_unregister(&tosa_bat_jacket.psy);
+ power_supply_unregister(&tosa_bat_main.psy);
+
+ /*
+ * now flush all pending work.
+ * we won't get any more schedules, since all
+ * sources (isr and external_power_changed)
+ * are unregistered now.
+ */
+ flush_scheduled_work();
+
+ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+ .driver.name = "wm97xx-battery",
+ .driver.owner = THIS_MODULE,
+ .probe = tosa_bat_probe,
+ .remove = __devexit_p(tosa_bat_remove),
+ .suspend = tosa_bat_suspend,
+ .resume = tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+ return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+ platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19c..ea96ead 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@
POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
