| /* |
| * Core Source for: |
| * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. |
| * For use with Cypress Txx3xx parts. |
| * Supported parts include: |
| * CY8CTST341 |
| * CY8CTMA340 |
| * |
| * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. |
| * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2, and only version 2, as published by the |
| * Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| * |
| * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/input/mt.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| |
| #include "cyttsp_core.h" |
| |
| /* Bootloader number of command keys */ |
| #define CY_NUM_BL_KEYS 8 |
| |
| /* helpers */ |
| #define GET_NUM_TOUCHES(x) ((x) & 0x0F) |
| #define IS_LARGE_AREA(x) (((x) & 0x10) >> 4) |
| #define IS_BAD_PKT(x) ((x) & 0x20) |
| #define IS_VALID_APP(x) ((x) & 0x01) |
| #define IS_OPERATIONAL_ERR(x) ((x) & 0x3F) |
| #define GET_HSTMODE(reg) (((reg) & 0x70) >> 4) |
| #define GET_BOOTLOADERMODE(reg) (((reg) & 0x10) >> 4) |
| |
| #define CY_REG_BASE 0x00 |
| #define CY_REG_ACT_DIST 0x1E |
| #define CY_REG_ACT_INTRVL 0x1D |
| #define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL + 1) |
| #define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT + 1) |
| #define CY_MAXZ 255 |
| #define CY_DELAY_DFLT 20 /* ms */ |
| #define CY_DELAY_MAX 500 |
| #define CY_ACT_DIST_DFLT 0xF8 |
| #define CY_HNDSHK_BIT 0x80 |
| /* device mode bits */ |
| #define CY_OPERATE_MODE 0x00 |
| #define CY_SYSINFO_MODE 0x10 |
| /* power mode select bits */ |
| #define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */ |
| #define CY_DEEP_SLEEP_MODE 0x02 |
| #define CY_LOW_POWER_MODE 0x04 |
| |
| /* Slots management */ |
| #define CY_MAX_FINGER 4 |
| #define CY_MAX_ID 16 |
| |
| static const u8 bl_command[] = { |
| 0x00, /* file offset */ |
| 0xFF, /* command */ |
| 0xA5, /* exit bootloader command */ |
| 0, 1, 2, 3, 4, 5, 6, 7 /* default keys */ |
| }; |
| |
| static int ttsp_read_block_data(struct cyttsp *ts, u8 command, |
| u8 length, void *buf) |
| { |
| int error; |
| int tries; |
| |
| for (tries = 0; tries < CY_NUM_RETRY; tries++) { |
| error = ts->bus_ops->read(ts, command, length, buf); |
| if (!error) |
| return 0; |
| |
| msleep(CY_DELAY_DFLT); |
| } |
| |
| return -EIO; |
| } |
| |
| static int ttsp_write_block_data(struct cyttsp *ts, u8 command, |
| u8 length, void *buf) |
| { |
| int error; |
| int tries; |
| |
| for (tries = 0; tries < CY_NUM_RETRY; tries++) { |
| error = ts->bus_ops->write(ts, command, length, buf); |
| if (!error) |
| return 0; |
| |
| msleep(CY_DELAY_DFLT); |
| } |
| |
| return -EIO; |
| } |
| |
| static int ttsp_send_command(struct cyttsp *ts, u8 cmd) |
| { |
| return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd); |
| } |
| |
| static int cyttsp_load_bl_regs(struct cyttsp *ts) |
| { |
| memset(&ts->bl_data, 0, sizeof(ts->bl_data)); |
| ts->bl_data.bl_status = 0x10; |
| |
| return ttsp_read_block_data(ts, CY_REG_BASE, |
| sizeof(ts->bl_data), &ts->bl_data); |
| } |
| |
| static int cyttsp_exit_bl_mode(struct cyttsp *ts) |
| { |
| int error; |
| u8 bl_cmd[sizeof(bl_command)]; |
| |
| memcpy(bl_cmd, bl_command, sizeof(bl_command)); |
| if (ts->pdata->bl_keys) |
| memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS], |
| ts->pdata->bl_keys, sizeof(bl_command)); |
| |
| error = ttsp_write_block_data(ts, CY_REG_BASE, |
| sizeof(bl_cmd), bl_cmd); |
| if (error) |
| return error; |
| |
| /* wait for TTSP Device to complete the operation */ |
| msleep(CY_DELAY_DFLT); |
| |
| error = cyttsp_load_bl_regs(ts); |
| if (error) |
| return error; |
| |
| if (GET_BOOTLOADERMODE(ts->bl_data.bl_status)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int cyttsp_set_operational_mode(struct cyttsp *ts) |
| { |
| int error; |
| |
| error = ttsp_send_command(ts, CY_OPERATE_MODE); |
| if (error) |
| return error; |
| |
| /* wait for TTSP Device to complete switch to Operational mode */ |
| error = ttsp_read_block_data(ts, CY_REG_BASE, |
| sizeof(ts->xy_data), &ts->xy_data); |
| if (error) |
| return error; |
| |
| return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0; |
| } |
| |
| static int cyttsp_set_sysinfo_mode(struct cyttsp *ts) |
| { |
| int error; |
| |
| memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data)); |
| |
| /* switch to sysinfo mode */ |
| error = ttsp_send_command(ts, CY_SYSINFO_MODE); |
| if (error) |
| return error; |
| |
| /* read sysinfo registers */ |
| msleep(CY_DELAY_DFLT); |
| error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data), |
| &ts->sysinfo_data); |
| if (error) |
| return error; |
| |
| if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int cyttsp_set_sysinfo_regs(struct cyttsp *ts) |
| { |
| int retval = 0; |
| |
| if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT || |
| ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT || |
| ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) { |
| |
| u8 intrvl_ray[] = { |
| ts->pdata->act_intrvl, |
| ts->pdata->tch_tmout, |
| ts->pdata->lp_intrvl |
| }; |
| |
| /* set intrvl registers */ |
| retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL, |
| sizeof(intrvl_ray), intrvl_ray); |
| msleep(CY_DELAY_DFLT); |
| } |
| |
| return retval; |
| } |
| |
| static int cyttsp_soft_reset(struct cyttsp *ts) |
| { |
| unsigned long timeout; |
| int retval; |
| |
| /* wait for interrupt to set ready completion */ |
| INIT_COMPLETION(ts->bl_ready); |
| ts->state = CY_BL_STATE; |
| |
| enable_irq(ts->irq); |
| |
| retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE); |
| if (retval) |
| goto out; |
| |
| timeout = wait_for_completion_timeout(&ts->bl_ready, |
| msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX)); |
| retval = timeout ? 0 : -EIO; |
| |
| out: |
| ts->state = CY_IDLE_STATE; |
| disable_irq(ts->irq); |
| return retval; |
| } |
| |
| static int cyttsp_act_dist_setup(struct cyttsp *ts) |
| { |
| u8 act_dist_setup = ts->pdata->act_dist; |
| |
| /* Init gesture; active distance setup */ |
| return ttsp_write_block_data(ts, CY_REG_ACT_DIST, |
| sizeof(act_dist_setup), &act_dist_setup); |
| } |
| |
| static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids) |
| { |
| ids[0] = xy_data->touch12_id >> 4; |
| ids[1] = xy_data->touch12_id & 0xF; |
| ids[2] = xy_data->touch34_id >> 4; |
| ids[3] = xy_data->touch34_id & 0xF; |
| } |
| |
| static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data, |
| int idx) |
| { |
| switch (idx) { |
| case 0: |
| return &xy_data->tch1; |
| case 1: |
| return &xy_data->tch2; |
| case 2: |
| return &xy_data->tch3; |
| case 3: |
| return &xy_data->tch4; |
| default: |
| return NULL; |
| } |
| } |
| |
| static void cyttsp_report_tchdata(struct cyttsp *ts) |
| { |
| struct cyttsp_xydata *xy_data = &ts->xy_data; |
| struct input_dev *input = ts->input; |
| int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat); |
| const struct cyttsp_tch *tch; |
| int ids[CY_MAX_ID]; |
| int i; |
| DECLARE_BITMAP(used, CY_MAX_ID); |
| |
| if (IS_LARGE_AREA(xy_data->tt_stat) == 1) { |
| /* terminate all active tracks */ |
| num_tch = 0; |
| dev_dbg(ts->dev, "%s: Large area detected\n", __func__); |
| } else if (num_tch > CY_MAX_FINGER) { |
| /* terminate all active tracks */ |
| num_tch = 0; |
| dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__); |
| } else if (IS_BAD_PKT(xy_data->tt_mode)) { |
| /* terminate all active tracks */ |
| num_tch = 0; |
| dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__); |
| } |
| |
| cyttsp_extract_track_ids(xy_data, ids); |
| |
| bitmap_zero(used, CY_MAX_ID); |
| |
| for (i = 0; i < num_tch; i++) { |
| tch = cyttsp_get_tch(xy_data, i); |
| |
| input_mt_slot(input, ids[i]); |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, true); |
| input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x)); |
| input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y)); |
| input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z); |
| |
| __set_bit(ids[i], used); |
| } |
| |
| for (i = 0; i < CY_MAX_ID; i++) { |
| if (test_bit(i, used)) |
| continue; |
| |
| input_mt_slot(input, i); |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, false); |
| } |
| |
| input_sync(input); |
| } |
| |
| static irqreturn_t cyttsp_irq(int irq, void *handle) |
| { |
| struct cyttsp *ts = handle; |
| int error; |
| |
| if (unlikely(ts->state == CY_BL_STATE)) { |
| complete(&ts->bl_ready); |
| goto out; |
| } |
| |
| /* Get touch data from CYTTSP device */ |
| error = ttsp_read_block_data(ts, CY_REG_BASE, |
| sizeof(struct cyttsp_xydata), &ts->xy_data); |
| if (error) |
| goto out; |
| |
| /* provide flow control handshake */ |
| if (ts->pdata->use_hndshk) { |
| error = ttsp_send_command(ts, |
| ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); |
| if (error) |
| goto out; |
| } |
| |
| if (unlikely(ts->state == CY_IDLE_STATE)) |
| goto out; |
| |
| if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) { |
| /* |
| * TTSP device has reset back to bootloader mode. |
| * Restore to operational mode. |
| */ |
| error = cyttsp_exit_bl_mode(ts); |
| if (error) { |
| dev_err(ts->dev, |
| "Could not return to operational mode, err: %d\n", |
| error); |
| ts->state = CY_IDLE_STATE; |
| } |
| } else { |
| cyttsp_report_tchdata(ts); |
| } |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int cyttsp_power_on(struct cyttsp *ts) |
| { |
| int error; |
| |
| error = cyttsp_soft_reset(ts); |
| if (error) |
| return error; |
| |
| error = cyttsp_load_bl_regs(ts); |
| if (error) |
| return error; |
| |
| if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) && |
| IS_VALID_APP(ts->bl_data.bl_status)) { |
| error = cyttsp_exit_bl_mode(ts); |
| if (error) |
| return error; |
| } |
| |
| if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE || |
| IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) { |
| return -ENODEV; |
| } |
| |
| error = cyttsp_set_sysinfo_mode(ts); |
| if (error) |
| return error; |
| |
| error = cyttsp_set_sysinfo_regs(ts); |
| if (error) |
| return error; |
| |
| error = cyttsp_set_operational_mode(ts); |
| if (error) |
| return error; |
| |
| /* init active distance */ |
| error = cyttsp_act_dist_setup(ts); |
| if (error) |
| return error; |
| |
| ts->state = CY_ACTIVE_STATE; |
| |
| return 0; |
| } |
| |
| static int cyttsp_enable(struct cyttsp *ts) |
| { |
| int error; |
| |
| /* |
| * The device firmware can wake on an I2C or SPI memory slave |
| * address match. So just reading a register is sufficient to |
| * wake up the device. The first read attempt will fail but it |
| * will wake it up making the second read attempt successful. |
| */ |
| error = ttsp_read_block_data(ts, CY_REG_BASE, |
| sizeof(ts->xy_data), &ts->xy_data); |
| if (error) |
| return error; |
| |
| if (GET_HSTMODE(ts->xy_data.hst_mode)) |
| return -EIO; |
| |
| enable_irq(ts->irq); |
| |
| return 0; |
| } |
| |
| static int cyttsp_disable(struct cyttsp *ts) |
| { |
| int error; |
| |
| error = ttsp_send_command(ts, CY_LOW_POWER_MODE); |
| if (error) |
| return error; |
| |
| disable_irq(ts->irq); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int cyttsp_suspend(struct device *dev) |
| { |
| struct cyttsp *ts = dev_get_drvdata(dev); |
| int retval = 0; |
| |
| mutex_lock(&ts->input->mutex); |
| |
| if (ts->input->users) { |
| retval = cyttsp_disable(ts); |
| if (retval == 0) |
| ts->suspended = true; |
| } |
| |
| mutex_unlock(&ts->input->mutex); |
| |
| return retval; |
| } |
| |
| static int cyttsp_resume(struct device *dev) |
| { |
| struct cyttsp *ts = dev_get_drvdata(dev); |
| |
| mutex_lock(&ts->input->mutex); |
| |
| if (ts->input->users) |
| cyttsp_enable(ts); |
| |
| ts->suspended = false; |
| |
| mutex_unlock(&ts->input->mutex); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume); |
| EXPORT_SYMBOL_GPL(cyttsp_pm_ops); |
| |
| static int cyttsp_open(struct input_dev *dev) |
| { |
| struct cyttsp *ts = input_get_drvdata(dev); |
| int retval = 0; |
| |
| if (!ts->suspended) |
| retval = cyttsp_enable(ts); |
| |
| return retval; |
| } |
| |
| static void cyttsp_close(struct input_dev *dev) |
| { |
| struct cyttsp *ts = input_get_drvdata(dev); |
| |
| if (!ts->suspended) |
| cyttsp_disable(ts); |
| } |
| |
| struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, |
| struct device *dev, int irq, size_t xfer_buf_size) |
| { |
| const struct cyttsp_platform_data *pdata = dev->platform_data; |
| struct cyttsp *ts; |
| struct input_dev *input_dev; |
| int error; |
| |
| if (!pdata || !pdata->name || irq <= 0) { |
| error = -EINVAL; |
| goto err_out; |
| } |
| |
| ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!ts || !input_dev) { |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| ts->dev = dev; |
| ts->input = input_dev; |
| ts->pdata = dev->platform_data; |
| ts->bus_ops = bus_ops; |
| ts->irq = irq; |
| |
| init_completion(&ts->bl_ready); |
| snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); |
| |
| if (pdata->init) { |
| error = pdata->init(); |
| if (error) { |
| dev_err(ts->dev, "platform init failed, err: %d\n", |
| error); |
| goto err_free_mem; |
| } |
| } |
| |
| input_dev->name = pdata->name; |
| input_dev->phys = ts->phys; |
| input_dev->id.bustype = bus_ops->bustype; |
| input_dev->dev.parent = ts->dev; |
| |
| input_dev->open = cyttsp_open; |
| input_dev->close = cyttsp_close; |
| |
| input_set_drvdata(input_dev, ts); |
| |
| __set_bit(EV_ABS, input_dev->evbit); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, |
| 0, pdata->maxx, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, |
| 0, pdata->maxy, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, |
| 0, CY_MAXZ, 0, 0); |
| |
| input_mt_init_slots(input_dev, CY_MAX_ID, 0); |
| |
| error = request_threaded_irq(ts->irq, NULL, cyttsp_irq, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| pdata->name, ts); |
| if (error) { |
| dev_err(ts->dev, "failed to request IRQ %d, err: %d\n", |
| ts->irq, error); |
| goto err_platform_exit; |
| } |
| |
| disable_irq(ts->irq); |
| |
| error = cyttsp_power_on(ts); |
| if (error) |
| goto err_free_irq; |
| |
| error = input_register_device(input_dev); |
| if (error) { |
| dev_err(ts->dev, "failed to register input device: %d\n", |
| error); |
| goto err_free_irq; |
| } |
| |
| return ts; |
| |
| err_free_irq: |
| free_irq(ts->irq, ts); |
| err_platform_exit: |
| if (pdata->exit) |
| pdata->exit(); |
| err_free_mem: |
| input_free_device(input_dev); |
| kfree(ts); |
| err_out: |
| return ERR_PTR(error); |
| } |
| EXPORT_SYMBOL_GPL(cyttsp_probe); |
| |
| void cyttsp_remove(struct cyttsp *ts) |
| { |
| free_irq(ts->irq, ts); |
| input_unregister_device(ts->input); |
| if (ts->pdata->exit) |
| ts->pdata->exit(); |
| kfree(ts); |
| } |
| EXPORT_SYMBOL_GPL(cyttsp_remove); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core"); |
| MODULE_AUTHOR("Cypress"); |