| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. |
| */ |
| |
| /* |
| * SGI TIOCA AGPGART routines. |
| * |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/agp_backend.h> |
| #include <asm/sn/addrs.h> |
| #include <asm/sn/io.h> |
| #include <asm/sn/pcidev.h> |
| #include <asm/sn/pcibus_provider_defs.h> |
| #include <asm/sn/tioca_provider.h> |
| #include "agp.h" |
| |
| extern int agp_memory_reserved; |
| extern uint32_t tioca_gart_found; |
| extern struct list_head tioca_list; |
| static struct agp_bridge_data **sgi_tioca_agp_bridges; |
| |
| /* |
| * The aperature size and related information is set up at TIOCA init time. |
| * Values for this table will be extracted and filled in at |
| * sgi_tioca_fetch_size() time. |
| */ |
| |
| static struct aper_size_info_fixed sgi_tioca_sizes[] = { |
| {0, 0, 0}, |
| }; |
| |
| static struct page *sgi_tioca_alloc_page(struct agp_bridge_data *bridge) |
| { |
| struct page *page; |
| int nid; |
| struct tioca_kernel *info = |
| (struct tioca_kernel *)bridge->dev_private_data; |
| |
| nid = info->ca_closest_node; |
| page = alloc_pages_node(nid, GFP_KERNEL, 0); |
| if (!page) |
| return NULL; |
| |
| get_page(page); |
| atomic_inc(&agp_bridge->current_memory_agp); |
| return page; |
| } |
| |
| /* |
| * Flush GART tlb's. Cannot selectively flush based on memory so the mem |
| * arg is ignored. |
| */ |
| |
| static void sgi_tioca_tlbflush(struct agp_memory *mem) |
| { |
| tioca_tlbflush(mem->bridge->dev_private_data); |
| } |
| |
| /* |
| * Given an address of a host physical page, turn it into a valid gart |
| * entry. |
| */ |
| static unsigned long |
| sgi_tioca_mask_memory(struct agp_bridge_data *bridge, dma_addr_t addr, |
| int type) |
| { |
| return tioca_physpage_to_gart(addr); |
| } |
| |
| static void sgi_tioca_agp_enable(struct agp_bridge_data *bridge, u32 mode) |
| { |
| tioca_fastwrite_enable(bridge->dev_private_data); |
| } |
| |
| /* |
| * sgi_tioca_configure() doesn't have anything to do since the base CA driver |
| * has alreay set up the GART. |
| */ |
| |
| static int sgi_tioca_configure(void) |
| { |
| return 0; |
| } |
| |
| /* |
| * Determine gfx aperature size. This has already been determined by the |
| * CA driver init, so just need to set agp_bridge values accordingly. |
| */ |
| |
| static int sgi_tioca_fetch_size(void) |
| { |
| struct tioca_kernel *info = |
| (struct tioca_kernel *)agp_bridge->dev_private_data; |
| |
| sgi_tioca_sizes[0].size = info->ca_gfxap_size / MB(1); |
| sgi_tioca_sizes[0].num_entries = info->ca_gfxgart_entries; |
| |
| return sgi_tioca_sizes[0].size; |
| } |
| |
| static int sgi_tioca_create_gatt_table(struct agp_bridge_data *bridge) |
| { |
| struct tioca_kernel *info = |
| (struct tioca_kernel *)bridge->dev_private_data; |
| |
| bridge->gatt_table_real = (u32 *) info->ca_gfxgart; |
| bridge->gatt_table = bridge->gatt_table_real; |
| bridge->gatt_bus_addr = info->ca_gfxgart_base; |
| |
| return 0; |
| } |
| |
| static int sgi_tioca_free_gatt_table(struct agp_bridge_data *bridge) |
| { |
| return 0; |
| } |
| |
| static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, |
| int type) |
| { |
| int num_entries; |
| size_t i; |
| off_t j; |
| void *temp; |
| struct agp_bridge_data *bridge; |
| u64 *table; |
| |
| bridge = mem->bridge; |
| if (!bridge) |
| return -EINVAL; |
| |
| table = (u64 *)bridge->gatt_table; |
| |
| temp = bridge->current_size; |
| |
| switch (bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| num_entries = A_SIZE_8(temp)->num_entries; |
| break; |
| case U16_APER_SIZE: |
| num_entries = A_SIZE_16(temp)->num_entries; |
| break; |
| case U32_APER_SIZE: |
| num_entries = A_SIZE_32(temp)->num_entries; |
| break; |
| case FIXED_APER_SIZE: |
| num_entries = A_SIZE_FIX(temp)->num_entries; |
| break; |
| case LVL2_APER_SIZE: |
| return -EINVAL; |
| default: |
| num_entries = 0; |
| break; |
| } |
| |
| num_entries -= agp_memory_reserved / PAGE_SIZE; |
| if (num_entries < 0) |
| num_entries = 0; |
| |
| if (type != 0 || mem->type != 0) { |
| return -EINVAL; |
| } |
| |
| if ((pg_start + mem->page_count) > num_entries) |
| return -EINVAL; |
| |
| j = pg_start; |
| |
| while (j < (pg_start + mem->page_count)) { |
| if (table[j]) |
| return -EBUSY; |
| j++; |
| } |
| |
| if (!mem->is_flushed) { |
| bridge->driver->cache_flush(); |
| mem->is_flushed = true; |
| } |
| |
| for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { |
| table[j] = |
| bridge->driver->mask_memory(bridge, |
| page_to_phys(mem->pages[i]), |
| mem->type); |
| } |
| |
| bridge->driver->tlb_flush(mem); |
| return 0; |
| } |
| |
| static int sgi_tioca_remove_memory(struct agp_memory *mem, off_t pg_start, |
| int type) |
| { |
| size_t i; |
| struct agp_bridge_data *bridge; |
| u64 *table; |
| |
| bridge = mem->bridge; |
| if (!bridge) |
| return -EINVAL; |
| |
| if (type != 0 || mem->type != 0) { |
| return -EINVAL; |
| } |
| |
| table = (u64 *)bridge->gatt_table; |
| |
| for (i = pg_start; i < (mem->page_count + pg_start); i++) { |
| table[i] = 0; |
| } |
| |
| bridge->driver->tlb_flush(mem); |
| return 0; |
| } |
| |
| static void sgi_tioca_cache_flush(void) |
| { |
| } |
| |
| /* |
| * Cleanup. Nothing to do as the CA driver owns the GART. |
| */ |
| |
| static void sgi_tioca_cleanup(void) |
| { |
| } |
| |
| static struct agp_bridge_data *sgi_tioca_find_bridge(struct pci_dev *pdev) |
| { |
| struct agp_bridge_data *bridge; |
| |
| list_for_each_entry(bridge, &agp_bridges, list) { |
| if (bridge->dev->bus == pdev->bus) |
| break; |
| } |
| return bridge; |
| } |
| |
| const struct agp_bridge_driver sgi_tioca_driver = { |
| .owner = THIS_MODULE, |
| .size_type = U16_APER_SIZE, |
| .configure = sgi_tioca_configure, |
| .fetch_size = sgi_tioca_fetch_size, |
| .cleanup = sgi_tioca_cleanup, |
| .tlb_flush = sgi_tioca_tlbflush, |
| .mask_memory = sgi_tioca_mask_memory, |
| .agp_enable = sgi_tioca_agp_enable, |
| .cache_flush = sgi_tioca_cache_flush, |
| .create_gatt_table = sgi_tioca_create_gatt_table, |
| .free_gatt_table = sgi_tioca_free_gatt_table, |
| .insert_memory = sgi_tioca_insert_memory, |
| .remove_memory = sgi_tioca_remove_memory, |
| .alloc_by_type = agp_generic_alloc_by_type, |
| .free_by_type = agp_generic_free_by_type, |
| .agp_alloc_page = sgi_tioca_alloc_page, |
| .agp_destroy_page = agp_generic_destroy_page, |
| .agp_type_to_mask_type = agp_generic_type_to_mask_type, |
| .cant_use_aperture = true, |
| .needs_scratch_page = false, |
| .num_aperture_sizes = 1, |
| }; |
| |
| static int __devinit agp_sgi_init(void) |
| { |
| unsigned int j; |
| struct tioca_kernel *info; |
| struct pci_dev *pdev = NULL; |
| |
| if (tioca_gart_found) |
| printk(KERN_INFO PFX "SGI TIO CA GART driver initialized.\n"); |
| else |
| return 0; |
| |
| sgi_tioca_agp_bridges = kmalloc(tioca_gart_found * |
| sizeof(struct agp_bridge_data *), |
| GFP_KERNEL); |
| if (!sgi_tioca_agp_bridges) |
| return -ENOMEM; |
| |
| j = 0; |
| list_for_each_entry(info, &tioca_list, ca_list) { |
| if (list_empty(info->ca_devices)) |
| continue; |
| list_for_each_entry(pdev, info->ca_devices, bus_list) { |
| u8 cap_ptr; |
| |
| if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8)) |
| continue; |
| cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); |
| if (!cap_ptr) |
| continue; |
| } |
| sgi_tioca_agp_bridges[j] = agp_alloc_bridge(); |
| printk(KERN_INFO PFX "bridge %d = 0x%p\n", j, |
| sgi_tioca_agp_bridges[j]); |
| if (sgi_tioca_agp_bridges[j]) { |
| sgi_tioca_agp_bridges[j]->dev = pdev; |
| sgi_tioca_agp_bridges[j]->dev_private_data = info; |
| sgi_tioca_agp_bridges[j]->driver = &sgi_tioca_driver; |
| sgi_tioca_agp_bridges[j]->gart_bus_addr = |
| info->ca_gfxap_base; |
| sgi_tioca_agp_bridges[j]->mode = (0x7D << 24) | /* 126 requests */ |
| (0x1 << 9) | /* SBA supported */ |
| (0x1 << 5) | /* 64-bit addresses supported */ |
| (0x1 << 4) | /* FW supported */ |
| (0x1 << 3) | /* AGP 3.0 mode */ |
| 0x2; /* 8x transfer only */ |
| sgi_tioca_agp_bridges[j]->current_size = |
| sgi_tioca_agp_bridges[j]->previous_size = |
| (void *)&sgi_tioca_sizes[0]; |
| agp_add_bridge(sgi_tioca_agp_bridges[j]); |
| } |
| j++; |
| } |
| |
| agp_find_bridge = &sgi_tioca_find_bridge; |
| return 0; |
| } |
| |
| static void agp_sgi_cleanup(void) |
| { |
| kfree(sgi_tioca_agp_bridges); |
| sgi_tioca_agp_bridges = NULL; |
| } |
| |
| module_init(agp_sgi_init); |
| module_exit(agp_sgi_cleanup); |
| |
| MODULE_LICENSE("GPL and additional rights"); |