PCI: use dev_printk in x86 quirk messages
Convert quirk printks to dev_printk().
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 150ba29..3cd7a2d 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -30,8 +30,8 @@
raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
if (!(word & (1 << 13))) {
- printk(KERN_INFO "Intel E7520/7320/7525 detected. "
- "Disabling irq balancing and affinity\n");
+ dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
+ "disabling irq balancing and affinity\n");
#ifdef CONFIG_IRQBALANCE
irqbalance_disable("");
#endif
@@ -104,14 +104,16 @@
pci_read_config_dword(dev, 0xF0, &rcba);
rcba &= 0xFFFFC000;
if (rcba == 0) {
- printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
+ "cannot force enable HPET\n");
return;
}
/* use bits 31:14, 16 kB aligned */
rcba_base = ioremap_nocache(rcba, 0x4000);
if (rcba_base == NULL) {
- printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
+ "cannot force enable HPET\n");
return;
}
@@ -122,8 +124,8 @@
/* HPET is enabled in HPTC. Just not reported by BIOS */
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
iounmap(rcba_base);
return;
}
@@ -142,11 +144,12 @@
if (err) {
force_hpet_address = 0;
iounmap(rcba_base);
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Failed to force enable HPET\n");
} else {
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
}
}
@@ -208,8 +211,8 @@
if (val & 0x4) {
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
return;
}
@@ -229,14 +232,14 @@
/* HPET is enabled in HPTC. Just not reported by BIOS */
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
return;
}
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
/*
@@ -294,8 +297,8 @@
*/
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
- printk(KERN_DEBUG "HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
return;
}
@@ -309,14 +312,14 @@
pci_read_config_dword(dev, 0x68, &val);
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
return;
}
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
@@ -344,7 +347,7 @@
pci_read_config_dword(dev, 0x44, &val);
force_hpet_address = val & 0xfffffffe;
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
return;
