diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 6656127..2b6e74d 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 
 /* Addresses to scan */
@@ -92,7 +93,7 @@
 	struct class_device *class_dev;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -162,10 +163,10 @@
 	struct adm1021_data *data = i2c_get_clientdata(client);	\
 	int temp = simple_strtoul(buf, NULL, 10);		\
 								\
-	down(&data->update_lock);				\
+	mutex_lock(&data->update_lock);				\
 	data->value = TEMP_TO_REG(temp);			\
 	adm1021_write_value(client, reg, data->value);		\
-	up(&data->update_lock);					\
+	mutex_unlock(&data->update_lock);			\
 	return count;						\
 }
 set(temp_max, ADM1021_REG_TOS_W);
@@ -275,7 +276,7 @@
 	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -351,7 +352,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1021_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -375,7 +376,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 9331c56..a4c859c 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -53,6 +53,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -133,7 +134,7 @@
 struct adm1025_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -207,11 +208,11 @@
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
 				  data->in_min[offset]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
@@ -221,11 +222,11 @@
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
 				  data->in_max[offset]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
@@ -247,11 +248,11 @@
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->temp_min[offset-1] = TEMP_TO_REG(val); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
 				  data->temp_min[offset-1]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
@@ -261,11 +262,11 @@
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->temp_max[offset-1] = TEMP_TO_REG(val); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
 				  data->temp_max[offset-1]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
@@ -404,7 +405,7 @@
 	/* We can fill in the remaining client fields */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -523,7 +524,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1025_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
 		int i;
@@ -558,7 +559,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index fefe6e7..8646ec1 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -32,6 +32,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -260,10 +261,10 @@
 struct adm1026_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	int valid;		/* !=0 if following fields are valid */
 	unsigned long last_reading;	/* In jiffies */
 	unsigned long last_config;	/* In jiffies */
@@ -575,7 +576,7 @@
 	int i;
 	long value, alarms, gpio;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if (!data->valid
 	    || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
 		/* Things that change quickly */
@@ -710,7 +711,7 @@
 	dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
 	data->vid = (data->gpio >> 11) & 0x1f;
 	data->valid = 1;
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return data;
 }
 
@@ -739,10 +740,10 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = INS_TO_REG(nr, val);
 	adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count; 
 }
 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
@@ -762,10 +763,10 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = INS_TO_REG(nr, val);
 	adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -813,10 +814,10 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
 	adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count; 
 }
 static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf)
@@ -831,10 +832,10 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET);
 	adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -874,11 +875,11 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]);
 	adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr),
 		data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -939,7 +940,7 @@
 	if (new_div == 0) {
 		return -EINVAL;
 	}
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	orig_div = data->fan_div[nr];
 	data->fan_div[nr] = DIV_FROM_REG(new_div);
 
@@ -958,7 +959,7 @@
 	if (data->fan_div[nr] != orig_div) {
 		fixup_fan_min(dev,nr,orig_div);
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1001,11 +1002,11 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = TEMP_TO_REG(val);
 	adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr],
 		data->temp_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
@@ -1025,11 +1026,11 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = TEMP_TO_REG(val);
 	adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr],
 		data->temp_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1064,11 +1065,11 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_offset[nr] = TEMP_TO_REG(val);
 	adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr],
 		data->temp_offset[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1115,11 +1116,11 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_tmin[nr] = TEMP_TO_REG(val);
 	adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr],
 		data->temp_tmin[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1150,11 +1151,11 @@
 	int val = simple_strtol(buf, NULL, 10);
 
 	if ((val == 1) || (val==0)) {
-		down(&data->update_lock);
+		mutex_lock(&data->update_lock);
 		data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4);
 		adm1026_write_value(client, ADM1026_REG_CONFIG1, 
 			data->config1);
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 	}
 	return count;
 }
@@ -1184,11 +1185,11 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_crit[nr] = TEMP_TO_REG(val);
 	adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr],
 		data->temp_crit[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1212,10 +1213,10 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->analog_out = DAC_TO_REG(val);
 	adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1267,7 +1268,7 @@
 	int val = simple_strtol(buf, NULL, 10);
 	unsigned long mask;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->alarm_mask = val & 0x7fffffff;
 	mask = data->alarm_mask
 		| (data->gpio_mask & 0x10000 ? 0x80000000 : 0);
@@ -1282,7 +1283,7 @@
 	mask >>= 8;
 	adm1026_write_value(client, ADM1026_REG_MASK4,
 		mask & 0xff);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1303,7 +1304,7 @@
 	int val = simple_strtol(buf, NULL, 10);
 	long   gpio;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->gpio = val & 0x1ffff;
 	gpio = data->gpio;
 	adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff);
@@ -1311,7 +1312,7 @@
 	adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff);
 	gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f);
 	adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1331,7 +1332,7 @@
 	int val = simple_strtol(buf, NULL, 10);
 	long   mask;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->gpio_mask = val & 0x1ffff;
 	mask = data->gpio_mask;
 	adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff);
@@ -1339,7 +1340,7 @@
 	adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff);
 	mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f);
 	adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1359,10 +1360,10 @@
 	if (data->pwm1.enable == 1) {
 		int val = simple_strtol(buf, NULL, 10);
 
-		down(&data->update_lock);
+		mutex_lock(&data->update_lock);
 		data->pwm1.pwm = PWM_TO_REG(val);
 		adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 	}
 	return count;
 }
@@ -1378,14 +1379,14 @@
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255);
 	if (data->pwm1.enable == 2) { /* apply immediately */
 		data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
 			PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
 		adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1406,7 +1407,7 @@
 	int     old_enable;
 
 	if ((val >= 0) && (val < 3)) {
-		down(&data->update_lock);
+		mutex_lock(&data->update_lock);
 		old_enable = data->pwm1.enable;
 		data->pwm1.enable = val;
 		data->config1 = (data->config1 & ~CFG1_PWM_AFC)
@@ -1424,7 +1425,7 @@
 			adm1026_write_value(client, ADM1026_REG_PWM, 
 				data->pwm1.pwm);
 		}
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 	}
 	return count;
 }
@@ -1541,7 +1542,7 @@
 	/* Fill in the remaining client fields */
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index d063979..3bf2da6 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Following macros takes channel parameter starting from 0 to 2 */
 #define ADM1031_REG_FAN_SPEED(nr)	(0x08 + (nr))
@@ -70,7 +71,7 @@
 struct adm1031_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	int chip_type;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -262,10 +263,10 @@
 
 	old_fan_mode = data->conf1;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	
 	if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return ret;
 	}
 	if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ 
@@ -288,7 +289,7 @@
 	}
 	data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
 	adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -329,11 +330,11 @@
 	struct adm1031_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
 	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
 			    data->auto_temp[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
@@ -349,11 +350,11 @@
 	struct adm1031_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
 	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
 			    data->temp_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -405,11 +406,11 @@
 	int val = simple_strtol(buf, NULL, 10);
 	int reg;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && 
 	    (((val>>4) & 0xf) != 5)) {
 		/* In automatic mode, the only PWM accepted is 33% */
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 	data->pwm[nr] = PWM_TO_REG(val);
@@ -417,7 +418,7 @@
 	adm1031_write_value(client, ADM1031_REG_PWM,
 			    nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
 			    : (data->pwm[nr] & 0xf) | (reg & 0xf0));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -511,7 +512,7 @@
 	struct adm1031_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if (val) {
 		data->fan_min[nr] = 
 			FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
@@ -519,7 +520,7 @@
 		data->fan_min[nr] = 0xff;
 	}
 	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t
@@ -540,7 +541,7 @@
 	if (tmp == 0xff)
 		return -EINVAL;
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
 	data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
 	new_min = data->fan_min[nr] * old_div / 
@@ -553,7 +554,7 @@
 			    data->fan_div[nr]);
 	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), 
 			    data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -627,11 +628,11 @@
 
 	val = simple_strtol(buf, NULL, 10);
 	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = TEMP_TO_REG(val);
 	adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
 			    data->temp_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t
@@ -643,11 +644,11 @@
 
 	val = simple_strtol(buf, NULL, 10);
 	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = TEMP_TO_REG(val);
 	adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
 			    data->temp_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t
@@ -659,11 +660,11 @@
 
 	val = simple_strtol(buf, NULL, 10);
 	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_crit[nr] = TEMP_TO_REG(val);
 	adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
 			    data->temp_crit[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -778,7 +779,7 @@
 
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -891,7 +892,7 @@
 	struct adm1031_data *data = i2c_get_clientdata(client);
 	int chan;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -965,7 +966,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 5ddc22f..43f6991 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -49,6 +49,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
@@ -150,7 +151,7 @@
 	enum chips type;
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;
 	unsigned long last_updated_measure;
 	unsigned long last_updated_config;
@@ -195,11 +196,11 @@
 	struct adm9240_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[attr->index] = TEMP_TO_REG(val);
 	i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index),
 			data->temp_max[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -246,11 +247,11 @@
 	struct adm9240_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[attr->index] = IN_TO_REG(val, attr->index);
 	i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index),
 			data->in_min[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -263,11 +264,11 @@
 	struct adm9240_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[attr->index] = IN_TO_REG(val, attr->index);
 	i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index),
 			data->in_max[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -350,7 +351,7 @@
 	int nr = attr->index;
 	u8 new_div;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (!val) {
 		data->fan_min[nr] = 255;
@@ -390,7 +391,7 @@
 	i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr),
 			data->fan_min[nr]);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -439,10 +440,10 @@
 	struct adm9240_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->aout = AOUT_TO_REG(val);
 	i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
@@ -539,7 +540,7 @@
 	/* fill in the remaining client fields and attach */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->type = kind;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	if ((err = i2c_attach_client(new_client)))
 		goto exit_free;
@@ -691,7 +692,7 @@
 	struct adm9240_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	/* minimum measurement cycle: 1.75 seconds */
 	if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
@@ -771,7 +772,7 @@
 		data->last_updated_config = jiffies;
 		data->valid = 1;
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return data;
 }
 
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index ae9de63..65b2709 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -44,6 +44,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
+#include <linux/mutex.h>
 #include "lm75.h"
 
 /*
@@ -182,10 +183,10 @@
 struct asb100_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	unsigned long last_updated;	/* In jiffies */
 
 	/* array of 2 pointers to subclients */
@@ -245,11 +246,11 @@
 	struct asb100_data *data = i2c_get_clientdata(client); \
 	unsigned long val = simple_strtoul(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_##reg[nr] = IN_TO_REG(val); \
 	asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
 		data->in_##reg[nr]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 
@@ -331,10 +332,10 @@
 	struct asb100_data *data = i2c_get_clientdata(client);
 	u32 val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -351,7 +352,7 @@
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 	int reg;
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	min = FAN_FROM_REG(data->fan_min[nr],
 			DIV_FROM_REG(data->fan_div[nr]));
@@ -381,7 +382,7 @@
 		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -461,7 +462,7 @@
 	struct asb100_data *data = i2c_get_clientdata(client); \
 	unsigned long val = simple_strtoul(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	switch (nr) { \
 	case 1: case 2: \
 		data->reg[nr] = LM75_TEMP_TO_REG(val); \
@@ -472,7 +473,7 @@
 	} \
 	asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
 			data->reg[nr]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 
@@ -574,11 +575,11 @@
 	struct asb100_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm &= 0x80; /* keep the enable bit */
 	data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
 	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -595,11 +596,11 @@
 	struct asb100_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm &= 0x0f; /* keep the duty cycle bits */
 	data->pwm |= (val ? 0x80 : 0x00);
 	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -729,7 +730,7 @@
 	}
 
 	new_client = &data->client;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
 	new_client->adapter = adapter;
@@ -789,7 +790,7 @@
 	data->type = kind;
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -885,7 +886,7 @@
 	struct i2c_client *cl;
 	int res, bank;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 
 	bank = (reg >> 8) & 0x0f;
 	if (bank > 2)
@@ -919,7 +920,7 @@
 	if (bank > 2)
 		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
 
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 
 	return res;
 }
@@ -930,7 +931,7 @@
 	struct i2c_client *cl;
 	int bank;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 
 	bank = (reg >> 8) & 0x0f;
 	if (bank > 2)
@@ -960,7 +961,7 @@
 	if (bank > 2)
 		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
 
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 }
 
 static void asb100_init_client(struct i2c_client *client)
@@ -984,7 +985,7 @@
 	struct asb100_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 		|| !data->valid) {
@@ -1042,7 +1043,7 @@
 		dev_dbg(&client->dev, "... device update complete\n");
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index b0c4900..728a1e8 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -26,6 +26,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
@@ -60,7 +61,7 @@
 struct atxp1_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	unsigned long last_updated;
 	u8 valid;
 	struct {
@@ -80,7 +81,7 @@
 	client = to_i2c_client(dev);
 	data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 
@@ -93,7 +94,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return(data);
 }
@@ -309,7 +310,7 @@
 
 	data->valid = 0;
 
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	err = i2c_attach_client(new_client);
 
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 203f9c7..478eb4b 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include "lm75.h"
 
 /* Addresses to scan */
@@ -72,7 +73,7 @@
 struct ds1621_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;			/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -156,10 +157,10 @@
 	struct ds1621_data *data = ds1621_update_client(dev);		\
 	u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));	\
 									\
-	down(&data->update_lock);					\
+	mutex_lock(&data->update_lock);					\
 	data->value = val;						\
 	ds1621_write_value(client, reg, data->value);			\
-	up(&data->update_lock);						\
+	mutex_unlock(&data->update_lock);				\
 	return count;							\
 }
 
@@ -242,7 +243,7 @@
 	/* Fill in remaining client fields and put it into the global list */
 	strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -297,7 +298,7 @@
 	struct ds1621_data *data = i2c_get_clientdata(client);
 	u8 new_conf;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -327,7 +328,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index 2540918..6bc76b4 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -33,6 +33,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -133,7 +134,7 @@
 struct fscher_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -332,7 +333,7 @@
 	 * global list */
 	strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -417,7 +418,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct fscher_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 
@@ -457,7 +458,7 @@
 		data->valid = 1;                 
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
@@ -472,10 +473,10 @@
 	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
 	fscher_write_value(client, reg, v);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -490,10 +491,10 @@
 {
 	unsigned long v = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
 	fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -518,14 +519,14 @@
 		return -EINVAL;
 	}
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	/* bits 2..7 reserved => mask with 0x03 */
 	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
 	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
 
 	fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -552,10 +553,10 @@
 	/* bits 2..7 reserved, 0 read only => mask with 0x02 */  
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
 	fscher_write_value(client, reg, v);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -609,10 +610,10 @@
 	/* bits 1..7 reserved => mask with 0x01 */  
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->global_control &= ~v;
 	fscher_write_value(client, reg, v);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -631,11 +632,11 @@
 	/* bits 0..3 reserved => mask with 0xf0 */  
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->watchdog[2] &= ~0xf0;
 	data->watchdog[2] |= v;
 	fscher_write_value(client, reg, data->watchdog[2]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -651,10 +652,10 @@
 	/* bits 0, 2..7 reserved => mask with 0x02 */  
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->watchdog[1] &= ~v;
 	fscher_write_value(client, reg, v);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -669,10 +670,10 @@
 {
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->watchdog[0] = v;
 	fscher_write_value(client, reg, data->watchdog[0]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 6d0146b..758978e 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -37,6 +37,7 @@
 #include <linux/init.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -114,7 +115,7 @@
 struct fscpos_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; 		/* 0 until following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -208,13 +209,13 @@
 		return -EINVAL;
 	}
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	/* bits 2..7 reserved => mask with 0x03 */
 	data->fan_ripple[nr - 1] &= ~0x03;
 	data->fan_ripple[nr - 1] |= v;
 	
 	fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -232,10 +233,10 @@
 	if (v < 0) v = 0;
 	if (v > 255) v = 255;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm[nr - 1] = v;
 	fscpos_write_value(client, reg, data->pwm[nr - 1]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -278,11 +279,11 @@
 	/* bits 0..3 reserved => mask with 0xf0 */
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->wdog_control &= ~0xf0;
 	data->wdog_control |= v;
 	fscpos_write_value(client, reg, data->wdog_control);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -304,10 +305,10 @@
 		return -EINVAL;
 	}
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->wdog_state &= ~v;
 	fscpos_write_value(client, reg, v);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -321,10 +322,10 @@
 {
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->wdog_preset = v;
 	fscpos_write_value(client, reg, data->wdog_preset);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -483,7 +484,7 @@
 	strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -579,7 +580,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct fscpos_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 		int i;
@@ -625,7 +626,7 @@
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return data;
 }
 
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 9e685e3..6606aab 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -43,6 +43,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
@@ -120,7 +121,7 @@
 	struct class_device *class_dev;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -212,10 +213,10 @@
 	struct gl518_data *data = i2c_get_clientdata(client);		\
 	long val = simple_strtol(buf, NULL, 10);			\
 									\
-	down(&data->update_lock);					\
+	mutex_lock(&data->update_lock);					\
 	data->value = type##_TO_REG(val);				\
 	gl518_write_value(client, reg, data->value);			\
-	up(&data->update_lock);						\
+	mutex_unlock(&data->update_lock);				\
 	return count;							\
 }
 
@@ -228,12 +229,12 @@
 	int regvalue;							\
 	unsigned long val = simple_strtoul(buf, NULL, 10);		\
 									\
-	down(&data->update_lock);					\
+	mutex_lock(&data->update_lock);					\
 	regvalue = gl518_read_value(client, reg);			\
 	data->value = type##_TO_REG(val);				\
 	regvalue = (regvalue & ~mask) | (data->value << shift);		\
 	gl518_write_value(client, reg, regvalue);			\
-	up(&data->update_lock);						\
+	mutex_unlock(&data->update_lock);				\
 	return count;							\
 }
 
@@ -265,7 +266,7 @@
 	int regvalue;
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
 	data->fan_min[0] = FAN_TO_REG(val,
 		DIV_FROM_REG(data->fan_div[0]));
@@ -280,7 +281,7 @@
 	data->beep_mask &= data->alarm_mask;
 	gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -291,7 +292,7 @@
 	int regvalue;
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
 	data->fan_min[1] = FAN_TO_REG(val,
 		DIV_FROM_REG(data->fan_div[1]));
@@ -306,7 +307,7 @@
 	data->beep_mask &= data->alarm_mask;
 	gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -407,7 +408,7 @@
 	strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -525,7 +526,7 @@
 	struct gl518_data *data = i2c_get_clientdata(client);
 	int val;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -586,7 +587,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index baee60e..47b4d49 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -29,6 +29,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Type of the extra sensor */
 static unsigned short extra_sensor_type;
@@ -121,7 +122,7 @@
 struct gl520_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* zero until the following fields are valid */
 	unsigned long last_updated;	/* in jiffies */
 
@@ -303,7 +304,7 @@
 	long v = simple_strtol(buf, NULL, 10);
 	u8 r;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (n == 0)
 		r = VDD_TO_REG(v);
@@ -317,7 +318,7 @@
 	else
 		gl520_write_value(client, reg, r);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -331,7 +332,7 @@
 	else
 		r = IN_TO_REG(v);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	data->in_max[n] = r;
 
@@ -340,7 +341,7 @@
 	else
 		gl520_write_value(client, reg, r);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -373,7 +374,7 @@
 	unsigned long v = simple_strtoul(buf, NULL, 10);
 	u8 r;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	r = FAN_TO_REG(v, data->fan_div[n - 1]);
 	data->fan_min[n - 1] = r;
 
@@ -390,7 +391,7 @@
 	data->beep_mask &= data->alarm_mask;
 	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -409,7 +410,7 @@
 		return -EINVAL;
 	}
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_div[n - 1] = r;
 
 	if (n == 1)
@@ -417,7 +418,7 @@
 	else
 		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4));
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -425,10 +426,10 @@
 {
 	u8 r = simple_strtoul(buf, NULL, 10)?1:0;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_off = r;
 	gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -454,10 +455,10 @@
 {
 	long v = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[n - 1] = TEMP_TO_REG(v);;
 	gl520_write_value(client, reg, data->temp_max[n - 1]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -465,10 +466,10 @@
 {
 	long v = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max_hyst[n - 1] = TEMP_TO_REG(v);
 	gl520_write_value(client, reg, data->temp_max_hyst[n - 1]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -491,10 +492,10 @@
 {
 	u8 r = simple_strtoul(buf, NULL, 10)?0:1;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->beep_enable = !r;
 	gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -502,11 +503,11 @@
 {
 	u8 r = simple_strtoul(buf, NULL, 10);
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	r &= data->alarm_mask;
 	data->beep_mask = r;
 	gl520_write_value(client, reg, r);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -561,7 +562,7 @@
 	/* Fill in the remaining client fields */
 	strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -685,7 +686,7 @@
 	struct gl520_data *data = i2c_get_clientdata(client);
 	int val;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 
@@ -750,7 +751,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 23a9e1e..7636c1a 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -33,6 +33,7 @@
 #include <linux/module.h>
 #include <linux/timer.h>
 #include <linux/dmi.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 #define HDAPS_LOW_PORT		0x1600	/* first port used by hdaps */
@@ -70,10 +71,10 @@
 static int rest_x;
 static int rest_y;
 
-static DECLARE_MUTEX(hdaps_sem);
+static DEFINE_MUTEX(hdaps_mutex);
 
 /*
- * __get_latch - Get the value from a given port.  Callers must hold hdaps_sem.
+ * __get_latch - Get the value from a given port.  Callers must hold hdaps_mutex.
  */
 static inline u8 __get_latch(u16 port)
 {
@@ -82,7 +83,7 @@
 
 /*
  * __check_latch - Check a port latch for a given value.  Returns zero if the
- * port contains the given value.  Callers must hold hdaps_sem.
+ * port contains the given value.  Callers must hold hdaps_mutex.
  */
 static inline int __check_latch(u16 port, u8 val)
 {
@@ -93,7 +94,7 @@
 
 /*
  * __wait_latch - Wait up to 100us for a port latch to get a certain value,
- * returning zero if the value is obtained.  Callers must hold hdaps_sem.
+ * returning zero if the value is obtained.  Callers must hold hdaps_mutex.
  */
 static int __wait_latch(u16 port, u8 val)
 {
@@ -110,7 +111,7 @@
 
 /*
  * __device_refresh - request a refresh from the accelerometer.  Does not wait
- * for refresh to complete.  Callers must hold hdaps_sem.
+ * for refresh to complete.  Callers must hold hdaps_mutex.
  */
 static void __device_refresh(void)
 {
@@ -124,7 +125,7 @@
 /*
  * __device_refresh_sync - request a synchronous refresh from the
  * accelerometer.  We wait for the refresh to complete.  Returns zero if
- * successful and nonzero on error.  Callers must hold hdaps_sem.
+ * successful and nonzero on error.  Callers must hold hdaps_mutex.
  */
 static int __device_refresh_sync(void)
 {
@@ -134,7 +135,7 @@
 
 /*
  * __device_complete - indicate to the accelerometer that we are done reading
- * data, and then initiate an async refresh.  Callers must hold hdaps_sem.
+ * data, and then initiate an async refresh.  Callers must hold hdaps_mutex.
  */
 static inline void __device_complete(void)
 {
@@ -152,7 +153,7 @@
 {
 	int ret;
 
-	down(&hdaps_sem);
+	mutex_lock(&hdaps_mutex);
 
 	/* do a sync refresh -- we need to be sure that we read fresh data */
 	ret = __device_refresh_sync();
@@ -163,7 +164,7 @@
 	__device_complete();
 
 out:
-	up(&hdaps_sem);
+	mutex_unlock(&hdaps_mutex);
 	return ret;
 }
 
@@ -198,9 +199,9 @@
 {
 	int ret;
 
-	down(&hdaps_sem);
+	mutex_lock(&hdaps_mutex);
 	ret = __hdaps_read_pair(port1, port2, val1, val2);
-	up(&hdaps_sem);
+	mutex_unlock(&hdaps_mutex);
 
 	return ret;
 }
@@ -213,7 +214,7 @@
 {
 	int total, ret = -ENXIO;
 
-	down(&hdaps_sem);
+	mutex_lock(&hdaps_mutex);
 
 	outb(0x13, 0x1610);
 	outb(0x01, 0x161f);
@@ -279,7 +280,7 @@
 	}
 
 out:
-	up(&hdaps_sem);
+	mutex_unlock(&hdaps_mutex);
 	return ret;
 }
 
@@ -313,7 +314,7 @@
 };
 
 /*
- * hdaps_calibrate - Set our "resting" values.  Callers must hold hdaps_sem.
+ * hdaps_calibrate - Set our "resting" values.  Callers must hold hdaps_mutex.
  */
 static void hdaps_calibrate(void)
 {
@@ -325,7 +326,7 @@
 	int x, y;
 
 	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
-	if (down_trylock(&hdaps_sem)) {
+	if (!mutex_trylock(&hdaps_mutex)) {
 		mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
 		return;
 	}
@@ -340,7 +341,7 @@
 	mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
 
 out:
-	up(&hdaps_sem);
+	mutex_unlock(&hdaps_mutex);
 }
 
 
@@ -420,9 +421,9 @@
 				     struct device_attribute *attr,
 				     const char *buf, size_t count)
 {
-	down(&hdaps_sem);
+	mutex_lock(&hdaps_mutex);
 	hdaps_calibrate();
-	up(&hdaps_sem);
+	mutex_unlock(&hdaps_mutex);
 
 	return count;
 }
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index d7a9401..122ff9c 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -41,6 +41,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 
@@ -194,10 +195,10 @@
 struct it87_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -290,11 +291,11 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val);
 	it87_write_value(client, IT87_REG_VIN_MIN(nr), 
 			data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
@@ -307,11 +308,11 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val);
 	it87_write_value(client, IT87_REG_VIN_MAX(nr), 
 			data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -381,10 +382,10 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_high[nr] = TEMP_TO_REG(val);
 	it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -397,10 +398,10 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_low[nr] = TEMP_TO_REG(val);
 	it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define show_temp_offset(offset)					\
@@ -440,7 +441,7 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	data->sensor &= ~(1 << nr);
 	data->sensor &= ~(8 << nr);
@@ -450,11 +451,11 @@
 	else if (val == 2)
 	    data->sensor |= 8 << nr;
 	else if (val != 0) {
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 	it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define show_sensor_offset(offset)					\
@@ -524,7 +525,7 @@
 	int val = simple_strtol(buf, NULL, 10);
 	u8 reg = it87_read_value(client, IT87_REG_FAN_DIV);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	switch (nr) {
 	case 0: data->fan_div[nr] = reg & 0x07; break;
 	case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
@@ -533,7 +534,7 @@
 
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 	it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
@@ -548,7 +549,7 @@
 	int i, min[3];
 	u8 old;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	old = it87_read_value(client, IT87_REG_FAN_DIV);
 
 	for (i = 0; i < 3; i++)
@@ -576,7 +577,7 @@
 		data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
 		it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_pwm_enable(struct device *dev,
@@ -589,7 +590,7 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (val == 0) {
 		int tmp;
@@ -606,11 +607,11 @@
 		/* set saved pwm value, clear FAN_CTLX PWM mode bit */
 		it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
 	} else {
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -626,11 +627,11 @@
 	if (val < 0 || val > 255)
 		return -EINVAL;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->manual_pwm_ctl[nr] = val;
 	if (data->fan_main_ctrl & (1 << nr))
 		it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -776,7 +777,7 @@
 
 	new_client = &data->client;
 	if (is_isa)
-		init_MUTEX(&data->lock);
+		mutex_init(&data->lock);
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
 	new_client->adapter = adapter;
@@ -823,7 +824,7 @@
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -950,10 +951,10 @@
 
 	int res;
 	if (i2c_is_isa_client(client)) {
-		down(&data->lock);
+		mutex_lock(&data->lock);
 		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
 		res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
-		up(&data->lock);
+		mutex_unlock(&data->lock);
 		return res;
 	} else
 		return i2c_smbus_read_byte_data(client, reg);
@@ -969,10 +970,10 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 
 	if (i2c_is_isa_client(client)) {
-		down(&data->lock);
+		mutex_lock(&data->lock);
 		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
 		outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
-		up(&data->lock);
+		mutex_unlock(&data->lock);
 		return 0;
 	} else
 		return i2c_smbus_write_byte_data(client, reg, value);
@@ -1098,7 +1099,7 @@
 	struct it87_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -1160,7 +1161,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 6b1aa7e..071f0fc 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -45,6 +45,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -153,7 +154,7 @@
 struct lm63_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -192,13 +193,13 @@
 	struct lm63_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan[1] = FAN_TO_REG(val);
 	i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB,
 				  data->fan[1] & 0xFF);
 	i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB,
 				  data->fan[1] >> 8);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -222,12 +223,12 @@
 		return -EPERM;
 
 	val = simple_strtoul(buf, NULL, 10);
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm1_value = val <= 0 ? 0 :
 			   val >= 255 ? 2 * data->pwm1_freq :
 			   (val * data->pwm1_freq * 2 + 127) / 255;
 	i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -253,10 +254,10 @@
 	struct lm63_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp8[1] = TEMP8_TO_REG(val);
 	i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -284,13 +285,13 @@
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp11[nr] = TEMP11_TO_REG(val);
 	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
 				  data->temp11[nr] >> 8);
 	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
 				  data->temp11[nr] & 0xff);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -314,11 +315,11 @@
 	long val = simple_strtol(buf, NULL, 10);
 	long hyst;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
 	i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
 				  HYST_TO_REG(hyst));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -427,7 +428,7 @@
 
 	strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -530,7 +531,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm63_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 		if (data->config & 0x04) { /* tachometer enabled  */
@@ -582,7 +583,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 74ca2c8..fc25b90 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -25,6 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include "lm75.h"
 
 
@@ -47,7 +48,7 @@
 struct lm75_data {
 	struct i2c_client	client;
 	struct class_device *class_dev;
-	struct semaphore	update_lock;
+	struct mutex		update_lock;
 	char			valid;		/* !=0 if following fields are valid */
 	unsigned long		last_updated;	/* In jiffies */
 	u16			temp_input;	/* Register values */
@@ -91,10 +92,10 @@
 	struct lm75_data *data = i2c_get_clientdata(client);	\
 	int temp = simple_strtoul(buf, NULL, 10);		\
 								\
-	down(&data->update_lock);				\
+	mutex_lock(&data->update_lock);				\
 	data->value = LM75_TEMP_TO_REG(temp);			\
 	lm75_write_value(client, reg, data->value);		\
-	up(&data->update_lock);					\
+	mutex_unlock(&data->update_lock);					\
 	return count;						\
 }
 set(temp_max, LM75_REG_TEMP_OS);
@@ -188,7 +189,7 @@
 	/* Fill in the remaining client fields and put it into the global list */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -264,7 +265,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm75_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -277,7 +278,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index df9e02a..459cc97 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -32,6 +32,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END };
@@ -51,7 +52,7 @@
 struct lm77_data {
 	struct i2c_client	client;
 	struct class_device *class_dev;
-	struct semaphore	update_lock;
+	struct mutex		update_lock;
 	char			valid;
 	unsigned long		last_updated;	/* In jiffies */
 	int			temp_input;	/* Temperatures */
@@ -139,10 +140,10 @@
 	struct lm77_data *data = i2c_get_clientdata(client);			\
 	long val = simple_strtoul(buf, NULL, 10);				\
 										\
-	down(&data->update_lock);						\
+	mutex_lock(&data->update_lock);						\
 	data->value = val;				\
 	lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value));		\
-	up(&data->update_lock);							\
+	mutex_unlock(&data->update_lock);					\
 	return count;								\
 }
 
@@ -157,11 +158,11 @@
 	struct lm77_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_hyst = data->temp_crit - val;
 	lm77_write_value(client, LM77_REG_TEMP_HYST,
 			 LM77_TEMP_TO_REG(data->temp_hyst));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -173,7 +174,7 @@
 	long val = simple_strtoul(buf, NULL, 10);
 	int oldcrithyst;
 	
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	oldcrithyst = data->temp_crit - data->temp_hyst;
 	data->temp_crit = val;
 	data->temp_hyst = data->temp_crit - oldcrithyst;
@@ -181,7 +182,7 @@
 			 LM77_TEMP_TO_REG(data->temp_crit));
 	lm77_write_value(client, LM77_REG_TEMP_HYST,
 			 LM77_TEMP_TO_REG(data->temp_hyst));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -306,7 +307,7 @@
 	/* Fill in the remaining client fields and put it into the global list */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -380,7 +381,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm77_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -406,7 +407,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index e404001..36d1192 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -27,6 +27,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 /* Addresses to scan */
@@ -131,10 +132,10 @@
 struct lm78_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -207,10 +208,10 @@
 	struct lm78_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val);
 	lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -221,10 +222,10 @@
 	struct lm78_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val);
 	lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 	
@@ -288,10 +289,10 @@
 	struct lm78_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_over = TEMP_TO_REG(val);
 	lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -307,10 +308,10 @@
 	struct lm78_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_hyst = TEMP_TO_REG(val);
 	lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -342,10 +343,10 @@
 	struct lm78_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -368,7 +369,7 @@
 	unsigned long min;
 	u8 reg;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	min = FAN_FROM_REG(data->fan_min[nr],
 			   DIV_FROM_REG(data->fan_div[nr]));
 
@@ -380,7 +381,7 @@
 	default:
 		dev_err(&client->dev, "fan_div value %ld not "
 			"supported. Choose one of 1, 2, 4 or 8!\n", val);
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
@@ -398,7 +399,7 @@
 	data->fan_min[nr] =
 		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -548,7 +549,7 @@
 
 	new_client = &data->client;
 	if (is_isa)
-		init_MUTEX(&data->lock);
+		mutex_init(&data->lock);
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
 	new_client->adapter = adapter;
@@ -598,7 +599,7 @@
 	data->type = kind;
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -697,10 +698,10 @@
 	int res;
 	if (i2c_is_isa_client(client)) {
 		struct lm78_data *data = i2c_get_clientdata(client);
-		down(&data->lock);
+		mutex_lock(&data->lock);
 		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
 		res = inb_p(client->addr + LM78_DATA_REG_OFFSET);
-		up(&data->lock);
+		mutex_unlock(&data->lock);
 		return res;
 	} else
 		return i2c_smbus_read_byte_data(client, reg);
@@ -717,10 +718,10 @@
 {
 	if (i2c_is_isa_client(client)) {
 		struct lm78_data *data = i2c_get_clientdata(client);
-		down(&data->lock);
+		mutex_lock(&data->lock);
 		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
 		outb_p(value, client->addr + LM78_DATA_REG_OFFSET);
-		up(&data->lock);
+		mutex_unlock(&data->lock);
 		return 0;
 	} else
 		return i2c_smbus_write_byte_data(client, reg, value);
@@ -742,7 +743,7 @@
 	struct lm78_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -786,7 +787,7 @@
 		data->fan_div[2] = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index c9a7cde..f72120d 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c,
@@ -108,7 +109,7 @@
 struct lm80_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -191,10 +192,10 @@
 	struct lm80_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock);\
+	mutex_lock(&data->update_lock);\
 	data->value = IN_TO_REG(val); \
 	lm80_write_value(client, reg, data->value); \
-	up(&data->update_lock);\
+	mutex_unlock(&data->update_lock);\
 	return count; \
 }
 set_in(min0, in_min[0], LM80_REG_IN_MIN(0));
@@ -241,10 +242,10 @@
 	struct lm80_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtoul(buf, NULL, 10); \
  \
-	down(&data->update_lock);\
+	mutex_lock(&data->update_lock);\
 	data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \
 	lm80_write_value(client, reg, data->value); \
-	up(&data->update_lock);\
+	mutex_unlock(&data->update_lock);\
 	return count; \
 }
 set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]);
@@ -263,7 +264,7 @@
 	u8 reg;
 
 	/* Save fan_min */
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	min = FAN_FROM_REG(data->fan_min[nr],
 			   DIV_FROM_REG(data->fan_div[nr]));
 
@@ -275,7 +276,7 @@
 	default:
 		dev_err(&client->dev, "fan_div value %ld not "
 			"supported. Choose one of 1, 2, 4 or 8!\n", val);
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
@@ -286,7 +287,7 @@
 	/* Restore fan_min */
 	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 	lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -325,10 +326,10 @@
 	struct lm80_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtoul(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->value = TEMP_LIMIT_TO_REG(val); \
 	lm80_write_value(client, reg, data->value); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX);
@@ -437,7 +438,7 @@
 	/* Fill in the remaining client fields and put it into the global list */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -545,7 +546,7 @@
 	struct lm80_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 		dev_dbg(&client->dev, "Starting lm80 update\n");
@@ -585,7 +586,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 26dfa9e..aac4ec2 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -35,6 +35,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -139,7 +140,7 @@
 struct lm83_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -171,11 +172,11 @@
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp[nr] = TEMP_TO_REG(val);
 	i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
 				  data->temp[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -300,7 +301,7 @@
 	/* We can fill in the remaining client fields */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -373,7 +374,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm83_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
 		int nr;
@@ -393,7 +394,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 7389a01..095e58a 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -31,6 +31,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -331,10 +332,10 @@
 struct lm85_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	int valid;		/* !=0 if following fields are valid */
 	unsigned long last_reading;	/* In jiffies */
 	unsigned long last_config;	/* In jiffies */
@@ -407,10 +408,10 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val);
 	lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -499,10 +500,10 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm[nr] = PWM_TO_REG(val);
 	lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
@@ -559,10 +560,10 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = INS_TO_REG(nr, val);
 	lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_in_max(struct device *dev, char *buf, int nr)
@@ -577,10 +578,10 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = INS_TO_REG(nr, val);
 	lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define show_in_reg(offset)						\
@@ -640,10 +641,10 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = TEMP_TO_REG(val);
 	lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
@@ -658,10 +659,10 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);	
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = TEMP_TO_REG(val);
 	lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define show_temp_reg(offset)						\
@@ -713,12 +714,12 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);   
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
 		| ZONE_TO_REG(val) ;
 	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
 		data->autofan[nr].config);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
@@ -733,11 +734,11 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->autofan[nr].min_pwm = PWM_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
 		data->autofan[nr].min_pwm);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
@@ -752,7 +753,7 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->autofan[nr].min_off = val;
 	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
 		| data->syncpwm3
@@ -760,7 +761,7 @@
 		| (data->autofan[1].min_off ? 0x40 : 0)
 		| (data->autofan[2].min_off ? 0x80 : 0)
 	);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
@@ -775,13 +776,13 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->autofan[nr].freq = FREQ_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
 		(data->zone[nr].range << 4)
 		| data->autofan[nr].freq
 	); 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define pwm_auto(offset)						\
@@ -857,7 +858,7 @@
 	int min;
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	min = TEMP_FROM_REG(data->zone[nr].limit);
 	data->zone[nr].off_desired = TEMP_TO_REG(val);
 	data->zone[nr].hyst = HYST_TO_REG(min - val);
@@ -871,7 +872,7 @@
 			(data->zone[2].hyst << 4)
 		);
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
@@ -886,7 +887,7 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->zone[nr].limit = TEMP_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
 		data->zone[nr].limit);
@@ -913,7 +914,7 @@
 			(data->zone[2].hyst << 4)
 		);
 	}
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
@@ -930,7 +931,7 @@
 	int min;
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	min = TEMP_FROM_REG(data->zone[nr].limit);
 	data->zone[nr].max_desired = TEMP_TO_REG(val);
 	data->zone[nr].range = RANGE_TO_REG(
@@ -938,7 +939,7 @@
 	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
 		((data->zone[nr].range & 0x0f) << 4)
 		| (data->autofan[nr].freq & 0x07));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
@@ -953,11 +954,11 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->zone[nr].critical = TEMP_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
 		data->zone[nr].critical);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define temp_auto(offset)						\
@@ -1149,7 +1150,7 @@
 	/* Fill in the remaining client fields */
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -1368,7 +1369,7 @@
 	struct lm85_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if ( !data->valid ||
 	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
@@ -1571,7 +1572,7 @@
 
 	data->valid = 1;
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 6ba34c3..e229daf 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -60,6 +60,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -176,7 +177,7 @@
 struct lm87_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* In jiffies */
 
@@ -253,11 +254,11 @@
 	struct lm87_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]);
 	lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) :
 			 LM87_REG_AIN_MIN(nr-6), data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 }
 
 static void set_in_max(struct device *dev, const char *buf, int nr)
@@ -266,11 +267,11 @@
 	struct lm87_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]);
 	lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) :
 			 LM87_REG_AIN_MAX(nr-6), data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 }
 
 #define set_in(offset) \
@@ -327,10 +328,10 @@
 	struct lm87_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_low[nr] = TEMP_TO_REG(val);
 	lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 }
 
 static void set_temp_high(struct device *dev, const char *buf, int nr)
@@ -339,10 +340,10 @@
 	struct lm87_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_high[nr] = TEMP_TO_REG(val);
 	lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 }
 
 #define set_temp(offset) \
@@ -411,11 +412,11 @@
 	struct lm87_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val,
 			    FAN_DIV_FROM_REG(data->fan_div[nr]));
 	lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 }
 
 /* Note: we save and restore the fan minimum here, because its value is
@@ -431,7 +432,7 @@
 	unsigned long min;
 	u8 reg;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	min = FAN_FROM_REG(data->fan_min[nr],
 			   FAN_DIV_FROM_REG(data->fan_div[nr]));
 
@@ -441,7 +442,7 @@
 	case 4: data->fan_div[nr] = 2; break;
 	case 8: data->fan_div[nr] = 3; break;
 	default:
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
@@ -459,7 +460,7 @@
 	data->fan_min[nr] = FAN_TO_REG(min, val);
 	lm87_write_value(client, LM87_REG_FAN_MIN(nr),
 			 data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -522,10 +523,10 @@
 	struct lm87_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->aout = AOUT_TO_REG(val);
 	lm87_write_value(client, LM87_REG_AOUT, data->aout);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
@@ -589,7 +590,7 @@
 	/* We can fill in the remaining client fields */
 	strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -744,7 +745,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm87_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 		int i, j;
@@ -813,7 +814,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 56794644..d9eeaf7 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -78,6 +78,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -201,7 +202,7 @@
 struct lm90_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 	int kind;
@@ -247,13 +248,13 @@
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		data->temp8[nr] = TEMP1_TO_REG_ADT7461(val);
 	else
 		data->temp8[nr] = TEMP1_TO_REG(val);
 	i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -281,7 +282,7 @@
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		data->temp11[nr] = TEMP2_TO_REG_ADT7461(val);
 	else
@@ -290,7 +291,7 @@
 				  data->temp11[nr] >> 8);
 	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
 				  data->temp11[nr] & 0xff);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -311,11 +312,11 @@
 	long val = simple_strtol(buf, NULL, 10);
 	long hyst;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	hyst = TEMP1_FROM_REG(data->temp8[3]) - val;
 	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
 				  HYST_TO_REG(hyst));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -558,7 +559,7 @@
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
 	data->kind = kind;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -646,7 +647,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm90_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
 		u8 oldh, newh, l;
@@ -692,7 +693,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index b0c4cb7..197f772 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -46,6 +46,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* The LM92 and MAX6635 have 2 two-state pins for address selection,
    resulting in 4 possible addresses. */
@@ -96,7 +97,7 @@
 struct lm92_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -114,7 +115,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm92_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ)
 	 || !data->valid) {
@@ -134,7 +135,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
@@ -158,10 +159,10 @@
 	struct lm92_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->value = TEMP_TO_REG(val); \
 	i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 set_temp(temp1_crit, LM92_REG_TEMP_CRIT);
@@ -194,11 +195,11 @@
 	struct lm92_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
 	i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
 				  swab16(TEMP_TO_REG(data->temp1_hyst)));
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -348,7 +349,7 @@
 	/* Fill in the remaining client fields */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the i2c subsystem a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 3abe330..b4135b5 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -33,6 +33,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
 					0x29, 0x2a, 0x2b,
@@ -104,7 +105,7 @@
 struct max1619_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -141,10 +142,10 @@
 	struct max1619_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->value = TEMP_TO_REG(val); \
 	i2c_smbus_write_byte_data(client, reg, data->value); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 
@@ -262,7 +263,7 @@
 	/* We can fill in the remaining client fields */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -330,7 +331,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct max1619_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
 		dev_dbg(&client->dev, "Updating max1619 data.\n");
@@ -353,7 +354,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 2de6932..ae05e48 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -43,6 +43,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 static u8 devid;
@@ -183,8 +184,8 @@
 struct pc87360_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
-	struct semaphore update_lock;
+	struct mutex lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -283,7 +284,7 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long fan_min = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index]));
 
 	/* If it wouldn't fit, change clock divisor */
@@ -300,7 +301,7 @@
 	/* Write new divider, preserve alarm bits */
 	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index),
 			    data->fan_status[attr->index] & 0xF9);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -343,12 +344,12 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm[attr->index] = PWM_TO_REG(val,
 			      FAN_CONFIG_INVERT(data->fan_conf, attr->index));
 	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index),
 			    data->pwm[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -393,11 +394,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
 	pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN,
 			    data->in_min[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -408,12 +409,12 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[attr->index] = IN_TO_REG(val,
 			       data->in_vref);
 	pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX,
 			    data->in_max[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -512,11 +513,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
 	pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN,
 			    data->in_min[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -527,11 +528,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[attr->index] = IN_TO_REG(val, data->in_vref);
 	pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX,
 			    data->in_max[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -542,11 +543,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref);
 	pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT,
 			    data->in_crit[attr->index-11]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -654,11 +655,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_min[attr->index] = TEMP_TO_REG(val);
 	pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN,
 			    data->temp_min[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -669,11 +670,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[attr->index] = TEMP_TO_REG(val);
 	pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX,
 			    data->temp_max[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -684,11 +685,11 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_crit[attr->index] = TEMP_TO_REG(val);
 	pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT,
 			    data->temp_crit[attr->index]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -845,7 +846,7 @@
 	dev = &client->dev;
 	i2c_set_clientdata(client, data);
 	client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	client->adapter = adapter;
 	client->driver = &pc87360_driver;
 	client->flags = 0;
@@ -878,7 +879,7 @@
 
 	strlcpy(client->name, name, sizeof(client->name));
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	for (i = 0; i < 3; i++) {
 		if (((data->address[i] = extra_isa[i]))
@@ -1027,11 +1028,11 @@
 {
 	int res;
 
-	down(&(data->lock));
+	mutex_lock(&(data->lock));
 	if (bank != NO_BANK)
 		outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
 	res = inb_p(data->address[ldi] + reg);
-	up(&(data->lock));
+	mutex_unlock(&(data->lock));
 
 	return res;
 }
@@ -1039,11 +1040,11 @@
 static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
 				u8 reg, u8 value)
 {
-	down(&(data->lock));
+	mutex_lock(&(data->lock));
 	if (bank != NO_BANK)
 		outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
 	outb_p(value, data->address[ldi] + reg);
-	up(&(data->lock));
+	mutex_unlock(&(data->lock));
 }
 
 static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
@@ -1215,7 +1216,7 @@
 	struct pc87360_data *data = i2c_get_clientdata(client);
 	u8 i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
 		dev_dbg(&client->dev, "Data update\n");
@@ -1315,7 +1316,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 8be5189..4db0dd8 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -60,6 +60,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 
@@ -167,9 +168,9 @@
 struct sis5595_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 	char maxins;		/* == 3 if temp enabled, otherwise == 4 */
@@ -231,10 +232,10 @@
 	struct sis5595_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val);
 	sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -245,10 +246,10 @@
 	struct sis5595_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val);
 	sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -310,10 +311,10 @@
 	struct sis5595_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_over = TEMP_TO_REG(val);
 	sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -329,10 +330,10 @@
 	struct sis5595_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_hyst = TEMP_TO_REG(val);
 	sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -364,10 +365,10 @@
 	struct sis5595_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -390,7 +391,7 @@
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 	int reg;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	min = FAN_FROM_REG(data->fan_min[nr],
 			DIV_FROM_REG(data->fan_div[nr]));
 	reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
@@ -403,7 +404,7 @@
 	default:
 		dev_err(&client->dev, "fan_div value %ld not "
 			"supported. Choose one of 1, 2, 4 or 8!\n", val);
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 	
@@ -419,7 +420,7 @@
 	data->fan_min[nr] =
 		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -527,7 +528,7 @@
 
 	new_client = &data->client;
 	new_client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	i2c_set_clientdata(new_client, data);
 	new_client->adapter = adapter;
 	new_client->driver = &sis5595_driver;
@@ -548,7 +549,7 @@
 	strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -635,20 +636,20 @@
 	int res;
 
 	struct sis5595_data *data = i2c_get_clientdata(client);
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
 	res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return res;
 }
 
 static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
 {
 	struct sis5595_data *data = i2c_get_clientdata(client);
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
 	outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return 0;
 }
 
@@ -667,7 +668,7 @@
 	struct sis5595_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -707,7 +708,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 8663bbb..b608618 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -35,6 +35,7 @@
 #include <linux/hwmon.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 /* Address is autodetected, there is no default value */
@@ -92,9 +93,9 @@
 struct smsc47b397_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	unsigned long last_updated; /* in jiffies */
 	int valid;
 
@@ -108,10 +109,10 @@
 	struct smsc47b397_data *data = i2c_get_clientdata(client);
 	int res;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	outb(reg, client->addr);
 	res = inb_p(client->addr + 1);
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return res;
 }
 
@@ -121,7 +122,7 @@
 	struct smsc47b397_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 		dev_dbg(&client->dev, "starting device update...\n");
@@ -144,7 +145,7 @@
 		dev_dbg(&client->dev, "... device update complete\n");
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
@@ -254,14 +255,14 @@
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	new_client->adapter = adapter;
 	new_client->driver = &smsc47b397_driver;
 	new_client->flags = 0;
 
 	strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE);
 
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	if ((err = i2c_attach_client(new_client)))
 		goto error_free;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index d1e3ec0..7732aec 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -34,6 +34,7 @@
 #include <linux/hwmon.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 /* Address is autodetected, there is no default value */
@@ -102,9 +103,9 @@
 struct smsc47m1_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	unsigned long last_updated;	/* In jiffies */
 
 	u8 fan[2];		/* Register value */
@@ -188,18 +189,18 @@
 	struct smsc47m1_data *data = i2c_get_clientdata(client);
 	long rpmdiv, val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 
 	if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
 	data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 	smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 			     data->fan_preload[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -220,14 +221,14 @@
 	if (new_div == old_div) /* No change */
 		return count;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	switch (new_div) {
 	case 1: data->fan_div[nr] = 0; break;
 	case 2: data->fan_div[nr] = 1; break;
 	case 4: data->fan_div[nr] = 2; break;
 	case 8: data->fan_div[nr] = 3; break;
 	default:
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
@@ -241,7 +242,7 @@
 	data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 	smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 			     data->fan_preload[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -257,12 +258,12 @@
 	if (val < 0 || val > 255)
 		return -EINVAL;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm[nr] &= 0x81; /* Preserve additional bits */
 	data->pwm[nr] |= PWM_TO_REG(val);
 	smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 			     data->pwm[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -278,12 +279,12 @@
 	if (val != 0 && val != 1)
 		return -EINVAL;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm[nr] &= 0xFE; /* preserve the other bits */
 	data->pwm[nr] |= !val;
 	smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 			     data->pwm[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -408,13 +409,13 @@
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	new_client->adapter = adapter;
 	new_client->driver = &smsc47m1_driver;
 	new_client->flags = 0;
 
 	strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* If no function is properly configured, there's no point in
 	   actually registering the chip. */
@@ -512,17 +513,17 @@
 {
 	int res;
 
-	down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	mutex_lock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 	res = inb_p(client->addr + reg);
-	up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	mutex_unlock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 	return res;
 }
 
 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
 {
-	down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	mutex_lock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 	outb_p(value, client->addr + reg);
-	up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	mutex_unlock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 }
 
 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
@@ -531,7 +532,7 @@
  	struct i2c_client *client = to_i2c_client(dev);
 	struct smsc47m1_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 		int i;
@@ -558,7 +559,7 @@
 		data->last_updated = jiffies;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return data;
 }
 
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index cb01848..166298f 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -39,6 +39,7 @@
 #include <linux/hwmon.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 
@@ -296,7 +297,7 @@
 struct via686a_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -355,11 +356,11 @@
 	struct via686a_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val, nr);
 	via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
 			data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_in_max(struct device *dev, const char *buf,
@@ -368,11 +369,11 @@
 	struct via686a_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val, nr);
 	via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
 			data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define show_in_offset(offset)					\
@@ -432,11 +433,11 @@
 	struct via686a_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_over[nr] = TEMP_TO_REG(val);
 	via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr],
 			    data->temp_over[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_temp_hyst(struct device *dev, const char *buf,
@@ -445,11 +446,11 @@
 	struct via686a_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_hyst[nr] = TEMP_TO_REG(val);
 	via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr],
 			    data->temp_hyst[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 #define show_temp_offset(offset)					\
@@ -508,10 +509,10 @@
 	struct via686a_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 	via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_fan_div(struct device *dev, const char *buf,
@@ -521,12 +522,12 @@
 	int val = simple_strtol(buf, NULL, 10);
 	int old;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	old = via686a_read_value(client, VIA686A_REG_FANDIV);
 	data->fan_div[nr] = DIV_TO_REG(val);
 	old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
 	via686a_write_value(client, VIA686A_REG_FANDIV, old);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -639,7 +640,7 @@
 	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
 		goto exit_free;
@@ -733,7 +734,7 @@
 	struct via686a_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -788,7 +789,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 271e9cb..686f3de 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -35,6 +35,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 
 static int force_addr;
@@ -148,7 +149,7 @@
 
 struct vt8231_data {
 	struct i2c_client client;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	struct class_device *class_dev;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -223,10 +224,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
 	vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -239,10 +240,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
 	vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -281,11 +282,11 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
 					0, 255);
 	vt8231_write_value(client, regvoltmin[5], data->in_min[5]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -296,11 +297,11 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
 					0, 255);
 	vt8231_write_value(client, regvoltmax[5], data->in_max[5]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -351,10 +352,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
 	vt8231_write_value(client, regtempmax[0], data->temp_max[0]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
@@ -364,10 +365,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
 	vt8231_write_value(client, regtempmin[0], data->temp_min[0]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -407,10 +408,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
 	vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -422,10 +423,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
 	vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -520,10 +521,10 @@
 	struct vt8231_data *data = i2c_get_clientdata(client);
 	int val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 	vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -539,7 +540,7 @@
 	long min = FAN_FROM_REG(data->fan_min[nr],
 				 DIV_FROM_REG(data->fan_div[nr]));
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	switch (val) {
 	case 1: data->fan_div[nr] = 0; break;
 	case 2: data->fan_div[nr] = 1; break;
@@ -548,7 +549,7 @@
 	default:
 		dev_err(&client->dev, "fan_div value %ld not supported."
 		        "Choose one of 1, 2, 4 or 8!\n", val);
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
@@ -558,7 +559,7 @@
 
 	old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
 	vt8231_write_value(client, VT8231_REG_FANDIV, old);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -660,7 +661,7 @@
 	/* Fill in the remaining client fields and put into the global list */
 	strlcpy(client->name, "vt8231", I2C_NAME_SIZE);
 
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(client)))
@@ -745,7 +746,7 @@
 	int i;
 	u16 low;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -804,7 +805,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 12d79f5..1affaf1 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -43,6 +43,7 @@
 #include <linux/i2c-isa.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 #include "lm75.h"
 
@@ -177,9 +178,9 @@
 struct w83627ehf_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -230,7 +231,7 @@
 	struct w83627ehf_data *data = i2c_get_clientdata(client);
 	int res, word_sized = is_word_sized(reg);
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 
 	w83627ehf_set_bank(client, reg);
 	outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
@@ -242,7 +243,7 @@
 	}
 	w83627ehf_reset_bank(client, reg);
 
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 
 	return res;
 }
@@ -252,7 +253,7 @@
 	struct w83627ehf_data *data = i2c_get_clientdata(client);
 	int word_sized = is_word_sized(reg);
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 
 	w83627ehf_set_bank(client, reg);
 	outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
@@ -264,7 +265,7 @@
 	outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
 	w83627ehf_reset_bank(client, reg);
 
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return 0;
 }
 
@@ -322,7 +323,7 @@
 	struct w83627ehf_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ)
 	 || !data->valid) {
@@ -397,7 +398,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return data;
 }
 
@@ -434,7 +435,7 @@
 	unsigned int reg;
 	u8 new_div;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if (!val) {
 		/* No min limit, alarm disabled */
 		data->fan_min[nr] = 255;
@@ -482,7 +483,7 @@
 	}
 	w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
 			      data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
@@ -561,11 +562,11 @@
 	struct w83627ehf_data *data = i2c_get_clientdata(client); \
 	u32 val = simple_strtoul(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->temp1_##reg = temp1_to_reg(val); \
 	w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
 			      data->temp1_##reg); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 store_temp1_reg(OVER, max);
@@ -597,11 +598,11 @@
 	struct w83627ehf_data *data = i2c_get_clientdata(client); \
 	u32 val = simple_strtoul(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->reg[nr] = LM75_TEMP_TO_REG(val); \
 	w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
 			      data->reg[nr]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 store_temp_reg(OVER, temp_max);
@@ -689,14 +690,14 @@
 	client = &data->client;
 	i2c_set_clientdata(client, data);
 	client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	client->adapter = adapter;
 	client->driver = &w83627ehf_driver;
 	client->flags = 0;
 
 	strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the i2c layer a new client has arrived */
 	if ((err = i2c_attach_client(client)))
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 7ea441d..3d4888c 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -46,6 +46,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 #include "lm75.h"
 
@@ -285,10 +286,10 @@
 struct w83627hf_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -360,12 +361,12 @@
 	 \
 	val = simple_strtoul(buf, NULL, 10); \
 	 \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_##reg[nr] = IN_TO_REG(val); \
 	w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
 			    data->in_##reg[nr]); \
 	 \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 store_in_reg(MIN, min)
@@ -451,7 +452,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	
 	if ((data->vrm_ovt & 0x01) &&
 		(w83627thf == data->type || w83637hf == data->type))
@@ -465,7 +466,7 @@
 		data->in_min[0] = IN_TO_REG(val);
 
 	w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -478,7 +479,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if ((data->vrm_ovt & 0x01) &&
 		(w83627thf == data->type || w83637hf == data->type))
@@ -492,7 +493,7 @@
 		data->in_max[0] = IN_TO_REG(val);
 
 	w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -529,13 +530,13 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr - 1] =
 	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
 	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
 			    data->fan_min[nr - 1]);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -597,7 +598,7 @@
 	 \
 	val = simple_strtoul(buf, NULL, 10); \
 	 \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	 \
 	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
 		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
@@ -609,7 +610,7 @@
 			data->temp_##reg); \
 	} \
 	 \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 store_temp_reg(OVER, max);
@@ -718,7 +719,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
 		data->beep_mask = BEEP_MASK_TO_REG(val);
@@ -736,7 +737,7 @@
 	w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
 			    val2 | data->beep_enable << 7);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -783,7 +784,7 @@
 	u8 reg;
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	/* Save fan_min */
 	min = FAN_FROM_REG(data->fan_min[nr],
@@ -805,7 +806,7 @@
 	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -848,7 +849,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (data->type == w83627thf) {
 		/* bits 0-3 are reserved  in 627THF */
@@ -865,7 +866,7 @@
 				     data->pwm[nr - 1]);
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -907,7 +908,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	switch (val) {
 	case 1:		/* PII/Celeron diode */
@@ -941,7 +942,7 @@
 		break;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1057,7 +1058,7 @@
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	new_client->adapter = adapter;
 	new_client->driver = &w83627hf_driver;
 	new_client->flags = 0;
@@ -1077,7 +1078,7 @@
 	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -1187,7 +1188,7 @@
 	struct w83627hf_data *data = i2c_get_clientdata(client);
 	int res, word_sized;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	word_sized = (((reg & 0xff00) == 0x100)
 		   || ((reg & 0xff00) == 0x200))
 		  && (((reg & 0x00ff) == 0x50)
@@ -1213,7 +1214,7 @@
 		       client->addr + W83781D_ADDR_REG_OFFSET);
 		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
 	}
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return res;
 }
 
@@ -1252,7 +1253,7 @@
 	struct w83627hf_data *data = i2c_get_clientdata(client);
 	int word_sized;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	word_sized = (((reg & 0xff00) == 0x100)
 		   || ((reg & 0xff00) == 0x200))
 		  && (((reg & 0x00ff) == 0x53)
@@ -1277,7 +1278,7 @@
 		       client->addr + W83781D_ADDR_REG_OFFSET);
 		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
 	}
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return 0;
 }
 
@@ -1387,7 +1388,7 @@
 	struct w83627hf_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -1470,7 +1471,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 64c1f8a..7821178 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -42,6 +42,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 #include "lm75.h"
 
@@ -226,10 +227,10 @@
 struct w83781d_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -311,11 +312,11 @@
 	 \
 	val = simple_strtoul(buf, NULL, 10) / 10; \
 	 \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_##reg[nr] = IN_TO_REG(val); \
 	w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
 	 \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 store_in_reg(MIN, min);
@@ -381,13 +382,13 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr - 1] =
 	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
 	w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
 			    data->fan_min[nr - 1]);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -446,7 +447,7 @@
 	 \
 	val = simple_strtol(buf, NULL, 10); \
 	 \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	 \
 	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
 		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
@@ -458,7 +459,7 @@
 			data->temp_##reg); \
 	} \
 	 \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 }
 store_temp_reg(OVER, max);
@@ -571,7 +572,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
 		data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
@@ -592,7 +593,7 @@
 	w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
 			    val2 | data->beep_enable << 7);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -637,7 +638,7 @@
 	u8 reg;
 	unsigned long val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	
 	/* Save fan_min */
 	min = FAN_FROM_REG(data->fan_min[nr],
@@ -662,7 +663,7 @@
 	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 	w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -709,10 +710,10 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->pwm[nr - 1] = PWM_TO_REG(val);
 	w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -725,7 +726,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	switch (val) {
 	case 0:
@@ -742,11 +743,11 @@
 		break;
 
 	default:
-		up(&data->update_lock);
+		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -808,7 +809,7 @@
 
 	val = simple_strtoul(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	switch (val) {
 	case 1:		/* PII/Celeron diode */
@@ -841,7 +842,7 @@
 		break;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -1073,7 +1074,7 @@
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = address;
-	init_MUTEX(&data->lock);
+	mutex_init(&data->lock);
 	new_client->adapter = adapter;
 	new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
 	new_client->flags = 0;
@@ -1178,7 +1179,7 @@
 	data->type = kind;
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -1325,7 +1326,7 @@
 	int res, word_sized, bank;
 	struct i2c_client *cl;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	if (i2c_is_isa_client(client)) {
 		word_sized = (((reg & 0xff00) == 0x100)
 			      || ((reg & 0xff00) == 0x200))
@@ -1383,7 +1384,7 @@
 		if (bank > 2)
 			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
 	}
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return res;
 }
 
@@ -1394,7 +1395,7 @@
 	int word_sized, bank;
 	struct i2c_client *cl;
 
-	down(&data->lock);
+	mutex_lock(&data->lock);
 	if (i2c_is_isa_client(client)) {
 		word_sized = (((reg & 0xff00) == 0x100)
 			      || ((reg & 0xff00) == 0x200))
@@ -1447,7 +1448,7 @@
 		if (bank > 2)
 			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
 	}
-	up(&data->lock);
+	mutex_unlock(&data->lock);
 	return 0;
 }
 
@@ -1533,7 +1534,7 @@
 	struct w83781d_data *data = i2c_get_clientdata(client);
 	int i;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -1641,7 +1642,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 2e86e18..6865c64 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -43,6 +43,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
@@ -271,7 +272,7 @@
 	struct class_device *class_dev;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -1222,7 +1223,7 @@
 	data->type = kind;
 
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(client)))
@@ -1373,7 +1374,7 @@
 	int i, j;
 	u8 reg_array_tmp[4], pwm_array_tmp[7], reg_tmp;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after
 	    (jiffies - data->last_updated, (unsigned long) (HZ * 3))
@@ -1484,7 +1485,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 #ifdef DEBUG
 	w83792d_print_debug(data, dev);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index f66c0cf..3f2bac1 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -39,6 +39,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* How many retries on register read error */
 #define MAX_RETRIES	5
@@ -107,7 +108,7 @@
 struct w83l785ts_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -221,7 +222,7 @@
 	/* We can fill in the remaining client fields. */
 	strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Default values in case the first read fails (unlikely). */
 	data->temp[1] = data->temp[0] = 0;
@@ -299,7 +300,7 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83l785ts_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
 		dev_dbg(&client->dev, "Updating w83l785ts data.\n");
@@ -312,7 +313,7 @@
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }