bnx2x,cnic: use FW 7.8.2
This patch moves the bnx2x and cnic drivers into using FW 7.8.2
which was recently submitted into the linux-firmware tree.
A short summary of minor bugs fixed by this FW:
1. In switch dependent mode, fix several issues regarding inner vlan
vs. DCB priorities.
2. iSCSI - not all packets were completed on a forward channel.
3. DCB - fixed for 4-port devices.
4. Fixed false parity reported in CAM memories when operating near -5%
on the 1.0V core supply.
5. ETS default settings are set to fairness between traffic classes
(rather than strict priority), and uses the same chip receive buffer
configuration for both PFC and pause.
For a complete list of fixes made by this FW, see commit 236367db
in the linux-firmware git repository.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index a19c9e0..c65295d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -2040,8 +2040,6 @@
u16 pkt_prod, bd_prod;
struct sw_tx_bd *tx_buf;
struct eth_tx_start_bd *tx_start_bd;
- struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
- struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
dma_addr_t mapping;
union eth_rx_cqe *cqe;
u8 cqe_fp_flags, cqe_fp_type;
@@ -2133,21 +2131,32 @@
tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
SET_FLAG(tx_start_bd->general_data,
- ETH_TX_START_BD_ETH_ADDR_TYPE,
- UNICAST_ADDRESS);
- SET_FLAG(tx_start_bd->general_data,
ETH_TX_START_BD_HDR_NBDS,
1);
+ SET_FLAG(tx_start_bd->general_data,
+ ETH_TX_START_BD_PARSE_NBDS,
+ 0);
/* turn on parsing and get a BD */
bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
- pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
- pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2;
-
- memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
- memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
-
+ if (CHIP_IS_E1x(bp)) {
+ u16 global_data = 0;
+ struct eth_tx_parse_bd_e1x *pbd_e1x =
+ &txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
+ memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
+ SET_FLAG(global_data,
+ ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE, UNICAST_ADDRESS);
+ pbd_e1x->global_data = cpu_to_le16(global_data);
+ } else {
+ u32 parsing_data = 0;
+ struct eth_tx_parse_bd_e2 *pbd_e2 =
+ &txdata->tx_desc_ring[bd_prod].parse_bd_e2;
+ memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
+ SET_FLAG(parsing_data,
+ ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE, UNICAST_ADDRESS);
+ pbd_e2->parsing_data = cpu_to_le32(parsing_data);
+ }
wmb();
txdata->tx_db.data.prod += 2;
