m68knommu: fix 5307 ColdFire UART vector setup
There is a couple of problems with the UART vector setup for the 5307
ColdFire UART. The ICR register access should be 8bit, not 32bit. The
address of the UIVR register is wrong, it needs to be offset into the
MBAR register region. Fix these.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 724faf0..44803bf 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -65,12 +65,12 @@
static void __init m5307_uart_init_line(int line, int irq)
{
if (line == 0) {
- writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
- writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
+ writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+ writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
} else if (line == 1) {
- writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
- writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
+ writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+ writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
}
}
