Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (54 commits)
MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic
[Blackfin] arch: remove old I2C BF54x porting.
[Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't compile without it.
[Blackfin] arch: fix bug kernel boot message: memory information is not reasonable
[Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver
[Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up
[Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core.
[Blackfin] arch: Add proper SW System Reset delay sequence
[Blackfin] arch: Update copyright date
[Blackfin] arch: GPIO API cleanup and anomaly update
[Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface
[Blackfin] arch: Initial checkin of the memory protection support.
[Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option
[Blackfin] arch: Add some comments - fix semicolons
[Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/
[Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted
[Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards
[Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel
[Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on
[Blackfin] arch: update to latest anomaly sheets
...
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 9b8291f..2537066 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -191,15 +191,6 @@
---------------------------
-What: i2c_adapter.list
-When: July 2007
-Why: Superfluous, this list duplicates the one maintained by the driver
- core.
-Who: Jean Delvare <khali@linux-fr.org>,
- David Brownell <dbrownell@users.sourceforge.net>
-
----------------------------
-
What: ACPI procfs interface
When: July 2008
Why: ACPI sysfs conversion should be finished by January 2008.
@@ -225,14 +216,6 @@
---------------------------
-What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
-When: September 2007
-Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific
- I2C-over-GPIO drivers.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: 'time' kernel boot parameter
When: January 2008
Why: replaced by 'printk.time=<value>' so that printk timestamps can be
@@ -266,13 +249,6 @@
---------------------------
-What: Legacy RTC drivers (under drivers/i2c/chips)
-When: November 2007
-Why: Obsolete. We have a RTC subsystem with better drivers.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: iptables SAME target
When: 1.1. 2008
Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h
@@ -323,3 +299,10 @@
Who: Stephen Hemminger <shemminger@linux-foundation.org>
---------------------------
+
+What: i2c-i810, i2c-prosavage and i2c-savage4
+When: May 2008
+Why: These drivers are superseded by i810fb, intelfb and savagefb.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index fde4420..3bd9583 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -17,9 +17,8 @@
Datasheets: Publicly available at the Intel website
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
Mark Studebaker <mdsxyz123@yahoo.com>
+ Jean Delvare <khali@linux-fr.org>
Module Parameters
@@ -62,7 +61,7 @@
I2C Block Read Support
----------------------
-Not supported at the moment.
+I2C block read is supported on the 82801EB (ICH5) and later chips.
SMBus 2.0 Support
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 06b4be3..1405fb6 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -10,7 +10,7 @@
* VIA Technologies, Inc. VT8231, VT8233, VT8233A
Datasheet: available on request from VIA
- * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251
+ * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8237S, VT8251
Datasheet: available on request and under NDA from VIA
* VIA Technologies, Inc. CX700
@@ -46,6 +46,7 @@
device 1106:3177 (VT8235)
device 1106:3227 (VT8237R)
device 1106:3337 (VT8237A)
+ device 1106:3372 (VT8237S)
device 1106:3287 (VT8251)
device 1106:8324 (CX700)
diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575
new file mode 100644
index 0000000..25f5698
--- /dev/null
+++ b/Documentation/i2c/chips/pcf8575
@@ -0,0 +1,72 @@
+About the PCF8575 chip and the pcf8575 kernel driver
+====================================================
+
+The PCF8575 chip is produced by the following manufacturers:
+
+ * Philips NXP
+ http://www.nxp.com/#/pip/cb=[type=product,path=50807/41735/41850,final=PCF8575_3]|pip=[pip=PCF8575_3][0]
+
+ * Texas Instruments
+ http://focus.ti.com/docs/prod/folders/print/pcf8575.html
+
+
+Some vendors sell small PCB's with the PCF8575 mounted on it. You can connect
+such a board to a Linux host via e.g. an USB to I2C interface. Examples of
+PCB boards with a PCF8575:
+
+ * SFE Breakout Board for PCF8575 I2C Expander by RobotShop
+ http://www.robotshop.ca/home/products/robot-parts/electronics/adapters-converters/sfe-pcf8575-i2c-expander-board.html
+
+ * Breakout Board for PCF8575 I2C Expander by Spark Fun Electronics
+ http://www.sparkfun.com/commerce/product_info.php?products_id=8130
+
+
+Description
+-----------
+The PCF8575 chip is a 16-bit I/O expander for the I2C bus. Up to eight of
+these chips can be connected to the same I2C bus. You can find this
+chip on some custom designed hardware, but you won't find it on PC
+motherboards.
+
+The PCF8575 chip consists of a 16-bit quasi-bidirectional port and an I2C-bus
+interface. Each of the sixteen I/O's can be independently used as an input or
+an output. To set up an I/O pin as an input, you have to write a 1 to the
+corresponding output.
+
+For more information please see the datasheet.
+
+
+Detection
+---------
+
+There is no method known to detect whether a chip on a given I2C address is
+a PCF8575 or whether it is any other I2C device. So there are two alternatives
+to let the driver find the installed PCF8575 devices:
+- Load this driver after any other I2C driver for I2C devices with addresses
+ in the range 0x20 .. 0x27.
+- Pass the I2C bus and address of the installed PCF8575 devices explicitly to
+ the driver at load time via the probe=... or force=... parameters.
+
+/sys interface
+--------------
+
+For each address on which a PCF8575 chip was found or forced the following
+files will be created under /sys:
+* /sys/bus/i2c/devices/<bus>-<address>/read
+* /sys/bus/i2c/devices/<bus>-<address>/write
+where bus is the I2C bus number (0, 1, ...) and address is the four-digit
+hexadecimal representation of the 7-bit I2C address of the PCF8575
+(0020 .. 0027).
+
+The read file is read-only. Reading it will trigger an I2C read and will hence
+report the current input state for the pins configured as inputs, and the
+current output value for the pins configured as outputs.
+
+The write file is read-write. Writing a value to it will configure all pins
+as output for which the corresponding bit is zero. Reading the write file will
+return the value last written, or -EAGAIN if no value has yet been written to
+the write file.
+
+On module initialization the configuration of the chip is not changed -- the
+chip is left in the state it was already configured in through either power-up
+or through previous I2C write actions.
diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub
index 89e69ad..0d8be1c 100644
--- a/Documentation/i2c/i2c-stub
+++ b/Documentation/i2c/i2c-stub
@@ -25,6 +25,9 @@
3. load the target sensors chip driver module
4. observe its behavior in the kernel log
+There's a script named i2c-stub-from-dump in the i2c-tools package which
+can load register values automatically from a chip dump.
+
PARAMETERS:
int chip_addr[10]:
@@ -32,9 +35,6 @@
CAVEATS:
-There are independent arrays for byte/data and word/data commands. Depending
-on if/how a target driver mixes them, you'll need to be careful.
-
If your target driver polls some byte or word waiting for it to change, the
stub could lock it up. Use i2cset to unlock it.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 2c17003..bfb0a55 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -267,9 +267,9 @@
Fortunately, as a module writer, you just have to define the `normal_i2c'
parameter. The complete declaration could look like this:
- /* Scan 0x37, and 0x48 to 0x4f */
- static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
- 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+ /* Scan 0x4c to 0x4f */
+ static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, 0x4f,
+ I2C_CLIENT_END };
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index d59b8dc..e38f45f 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -18,6 +18,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -47,18 +48,17 @@
.resource = &avila_flash_resource,
};
-static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
.sda_pin = AVILA_SDA_PIN,
.scl_pin = AVILA_SCL_PIN,
};
-static struct platform_device avila_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device avila_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev = {
- .platform_data = &avila_i2c_gpio_pins,
+ .dev = {
+ .platform_data = &avila_i2c_gpio_data,
},
- .num_resources = 0
};
static struct resource avila_uart_resources[] = {
@@ -133,7 +133,7 @@
};
static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_controller,
+ &avila_i2c_gpio,
&avila_flash,
&avila_uart
};
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 1e75e10..c473d40 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -37,15 +38,17 @@
.resource = &dsmg600_flash_resource,
};
-static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
.sda_pin = DSMG600_SDA_PIN,
.scl_pin = DSMG600_SCL_PIN,
};
-static struct platform_device dsmg600_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device dsmg600_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev.platform_data = &dsmg600_i2c_gpio_pins,
+ .dev = {
+ .platform_data = &dsmg600_i2c_gpio_data,
+ },
};
#ifdef CONFIG_LEDS_CLASS
@@ -116,7 +119,7 @@
};
static struct platform_device *dsmg600_devices[] __initdata = {
- &dsmg600_i2c_controller,
+ &dsmg600_i2c_gpio,
&dsmg600_flash,
};
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index d5008d8..e89070d 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -15,6 +15,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -120,18 +121,17 @@
};
#endif /* CONFIG_MTD_NAND_PLATFORM */
-static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
.sda_pin = IXDP425_SDA_PIN,
.scl_pin = IXDP425_SCL_PIN,
};
-static struct platform_device ixdp425_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device ixdp425_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev = {
- .platform_data = &ixdp425_i2c_gpio_pins,
+ .dev = {
+ .platform_data = &ixdp425_i2c_gpio_data,
},
- .num_resources = 0
};
static struct resource ixdp425_uart_resources[] = {
@@ -178,7 +178,7 @@
};
static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_controller,
+ &ixdp425_i2c_gpio,
&ixdp425_flash,
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 78a1741..54d884f 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -16,6 +16,7 @@
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -68,16 +69,17 @@
};
#endif
-static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
.sda_pin = NAS100D_SDA_PIN,
.scl_pin = NAS100D_SCL_PIN,
};
-static struct platform_device nas100d_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device nas100d_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev.platform_data = &nas100d_i2c_gpio_pins,
- .num_resources = 0,
+ .dev = {
+ .platform_data = &nas100d_i2c_gpio_data,
+ },
};
static struct resource nas100d_uart_resources[] = {
@@ -124,7 +126,7 @@
};
static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_controller,
+ &nas100d_i2c_gpio,
&nas100d_flash,
#ifdef CONFIG_LEDS_IXP4XX
&nas100d_leds,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 9bf8ccb..77277d2 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -18,6 +18,7 @@
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,7 +42,7 @@
.resource = &nslu2_flash_resource,
};
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
.sda_pin = NSLU2_SDA_PIN,
.scl_pin = NSLU2_SCL_PIN,
};
@@ -82,11 +83,12 @@
};
#endif
-static struct platform_device nslu2_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device nslu2_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev.platform_data = &nslu2_i2c_gpio_pins,
- .num_resources = 0,
+ .dev = {
+ .platform_data = &nslu2_i2c_gpio_data,
+ },
};
static struct platform_device nslu2_beeper = {
@@ -139,7 +141,7 @@
};
static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
+ &nslu2_i2c_gpio,
&nslu2_flash,
&nslu2_beeper,
#ifdef CONFIG_LEDS_IXP4XX
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 1306812..9393824 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -27,6 +27,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/i2c/tps65010.h>
#include <asm/hardware.h>
#include <asm/gpio.h>
@@ -36,7 +37,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/irda.h>
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4f84ae2..978cdab 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -26,6 +26,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/i2c/tps65010.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -37,7 +38,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/gpioexpander.h>
#include <asm/arch/irqs.h>
#include <asm/arch/mux.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5db182d..5b575e6 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -37,6 +37,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/i2c/tps65010.h>
+
#include <asm/hardware.h>
#include <asm/gpio.h>
@@ -46,7 +48,6 @@
#include <asm/mach/flash.h>
#include <asm/arch/usb.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/common.h>
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 86de303..6939d5e 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,13 +5,13 @@
*/
#include <linux/init.h>
#include <linux/workqueue.h>
+#include <linux/i2c/tps65010.h>
#include <asm/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/tps65010.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 12d2fe0..254892a 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -29,7 +29,7 @@
#define MAX7310_TIMEOUT 0x04
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
/* I2C Magic */
I2C_CLIENT_INSMOD;
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8e126e6..57efebd 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -24,6 +24,7 @@
#include <asm/arch/ohci.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>
+#include <asm/arch/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -423,6 +424,11 @@
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
+void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa27x_device_i2c_power.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
&pxa_device_mci,
&pxa_device_udc,
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index d51e18f..841904c 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -270,6 +270,24 @@
#endif
+/* All Alchemy demoboards with I2C have this #define in their headers */
+#ifdef SMBUS_PSC_BASE
+static struct resource pbdb_smbus_resources[] = {
+ {
+ .start = SMBUS_PSC_BASE,
+ .end = SMBUS_PSC_BASE + 0x24 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device pbdb_smbus_device = {
+ .name = "au1xpsc_smbus",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(pbdb_smbus_resources),
+ .resource = pbdb_smbus_resources,
+};
+#endif
+
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_usb_ohci_device,
&au1x00_pcmcia_device,
@@ -287,6 +305,9 @@
#ifdef CONFIG_MIPS_DB1200
&smc91x_device,
#endif
+#ifdef SMBUS_PSC_BASE
+ &pbdb_smbus_device,
+#endif
};
int __init au1xxx_platform_init(void)
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index b84f8df..cb0a749 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -224,26 +224,6 @@
ipic_set_default_priority();
}
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init
-mpc834x_rtc_hookup(void)
-{
- struct timespec tv;
-
- ppc_md.get_rtc_time = ds1374_get_rtc_time;
- ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time)();
- do_settimeofday(&tv);
-
- return 0;
-}
-late_initcall(mpc834x_rtc_hookup);
-#endif
static __inline__ void
mpc834x_sys_set_bat(void)
{
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
index 4ee2bd1..27ce389 100644
--- a/arch/ppc/platforms/85xx/tqm85xx.c
+++ b/arch/ppc/platforms/85xx/tqm85xx.c
@@ -258,27 +258,6 @@
return 0;
}
-#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337)
-extern ulong ds1337_get_rtc_time(void);
-extern int ds1337_set_rtc_time(unsigned long nowtime);
-
-static int __init
-tqm85xx_rtc_hookup(void)
-{
- struct timespec tv;
-
- ppc_md.set_rtc_time = ds1337_set_rtc_time;
- ppc_md.get_rtc_time = ds1337_get_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time)();
- do_settimeofday(&tv);
-
- return 0;
-}
-late_initcall(tqm85xx_rtc_hookup);
-#endif
-
#ifdef CONFIG_PCI
/*
* interrupt routing
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
index 52f63e6..fe6e88c 100644
--- a/arch/ppc/platforms/katana.c
+++ b/arch/ppc/platforms/katana.c
@@ -838,27 +838,6 @@
return bdp->bi_memsize;
}
-#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00)
-extern ulong m41t00_get_rtc_time(void);
-extern int m41t00_set_rtc_time(ulong);
-
-static int __init
-katana_rtc_hookup(void)
-{
- struct timespec tv;
-
- ppc_md.get_rtc_time = m41t00_get_rtc_time;
- ppc_md.set_rtc_time = m41t00_set_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time)();
- do_settimeofday(&tv);
-
- return 0;
-}
-late_initcall(katana_rtc_hookup);
-#endif
-
#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
static void __init
katana_map_io(void)
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index a37cb6b..3581282 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -1,7 +1,7 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-bit.c i2c driver algorithms for bit-shift adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-2000 Simon G. Vogl
+/* -------------------------------------------------------------------------
+ * i2c-algo-bit.c i2c driver algorithms for bit-shift adapters
+ * -------------------------------------------------------------------------
+ * Copyright (C) 1995-2000 Simon G. Vogl
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -15,8 +15,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ------------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
<kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */
@@ -60,26 +60,26 @@
/* --- setting states on the bus with the right timing: --------------- */
-#define setsda(adap,val) adap->setsda(adap->data, val)
-#define setscl(adap,val) adap->setscl(adap->data, val)
-#define getsda(adap) adap->getsda(adap->data)
-#define getscl(adap) adap->getscl(adap->data)
+#define setsda(adap, val) adap->setsda(adap->data, val)
+#define setscl(adap, val) adap->setscl(adap->data, val)
+#define getsda(adap) adap->getsda(adap->data)
+#define getscl(adap) adap->getscl(adap->data)
static inline void sdalo(struct i2c_algo_bit_data *adap)
{
- setsda(adap,0);
+ setsda(adap, 0);
udelay((adap->udelay + 1) / 2);
}
static inline void sdahi(struct i2c_algo_bit_data *adap)
{
- setsda(adap,1);
+ setsda(adap, 1);
udelay((adap->udelay + 1) / 2);
}
static inline void scllo(struct i2c_algo_bit_data *adap)
{
- setscl(adap,0);
+ setscl(adap, 0);
udelay(adap->udelay / 2);
}
@@ -91,22 +91,21 @@
{
unsigned long start;
- setscl(adap,1);
+ setscl(adap, 1);
/* Not all adapters have scl sense line... */
if (!adap->getscl)
goto done;
- start=jiffies;
- while (! getscl(adap) ) {
- /* the hw knows how to read the clock line,
- * so we wait until it actually gets high.
- * This is safer as some chips may hold it low
- * while they are processing data internally.
- */
- if (time_after_eq(jiffies, start+adap->timeout)) {
+ start = jiffies;
+ while (!getscl(adap)) {
+ /* This hw knows how to read the clock line, so we wait
+ * until it actually gets high. This is safer as some
+ * chips may hold it low ("clock stretching") while they
+ * are processing data internally.
+ */
+ if (time_after_eq(jiffies, start + adap->timeout))
return -ETIMEDOUT;
- }
cond_resched();
}
#ifdef DEBUG
@@ -118,11 +117,11 @@
done:
udelay(adap->udelay);
return 0;
-}
+}
/* --- other auxiliary functions -------------------------------------- */
-static void i2c_start(struct i2c_algo_bit_data *adap)
+static void i2c_start(struct i2c_algo_bit_data *adap)
{
/* assert: scl, sda are high */
setsda(adap, 0);
@@ -130,7 +129,7 @@
scllo(adap);
}
-static void i2c_repstart(struct i2c_algo_bit_data *adap)
+static void i2c_repstart(struct i2c_algo_bit_data *adap)
{
/* assert: scl is low */
sdahi(adap);
@@ -141,18 +140,18 @@
}
-static void i2c_stop(struct i2c_algo_bit_data *adap)
+static void i2c_stop(struct i2c_algo_bit_data *adap)
{
/* assert: scl is low */
sdalo(adap);
- sclhi(adap);
+ sclhi(adap);
setsda(adap, 1);
udelay(adap->udelay);
}
-/* send a byte without start cond., look for arbitration,
+/* send a byte without start cond., look for arbitration,
check ackn. from slave */
/* returns:
* 1 if the device acknowledged
@@ -167,27 +166,33 @@
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
/* assert: scl is low */
- for ( i=7 ; i>=0 ; i-- ) {
+ for (i = 7; i >= 0; i--) {
sb = (c >> i) & 1;
- setsda(adap,sb);
+ setsda(adap, sb);
udelay((adap->udelay + 1) / 2);
- if (sclhi(adap)<0) { /* timed out */
+ if (sclhi(adap) < 0) { /* timed out */
bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
"timeout at bit #%d\n", (int)c, i);
return -ETIMEDOUT;
- };
- /* do arbitration here:
- * if ( sb && ! getsda(adap) ) -> ouch! Get out of here.
+ }
+ /* FIXME do arbitration here:
+ * if (sb && !getsda(adap)) -> ouch! Get out of here.
+ *
+ * Report a unique code, so higher level code can retry
+ * the whole (combined) message and *NOT* issue STOP.
*/
scllo(adap);
}
sdahi(adap);
- if (sclhi(adap)<0){ /* timeout */
+ if (sclhi(adap) < 0) { /* timeout */
bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
"timeout at ack\n", (int)c);
return -ETIMEDOUT;
- };
- /* read ack: SDA should be pulled down by slave */
+ }
+
+ /* read ack: SDA should be pulled down by slave, or it may
+ * NAK (usually to report problems with the data we wrote).
+ */
ack = !getsda(adap); /* ack: sda is pulled low -> success */
bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c,
ack ? "A" : "NA");
@@ -198,24 +203,24 @@
}
-static int i2c_inb(struct i2c_adapter *i2c_adap)
+static int i2c_inb(struct i2c_adapter *i2c_adap)
{
/* read byte via i2c port, without start/stop sequence */
/* acknowledge is sent in i2c_read. */
int i;
- unsigned char indata=0;
+ unsigned char indata = 0;
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
/* assert: scl is low */
sdahi(adap);
- for (i=0;i<8;i++) {
- if (sclhi(adap)<0) { /* timeout */
+ for (i = 0; i < 8; i++) {
+ if (sclhi(adap) < 0) { /* timeout */
bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit "
"#%d\n", 7 - i);
return -ETIMEDOUT;
- };
+ }
indata *= 2;
- if ( getsda(adap) )
+ if (getsda(adap))
indata |= 0x01;
setscl(adap, 0);
udelay(i == 7 ? adap->udelay / 2 : adap->udelay);
@@ -228,66 +233,67 @@
* Sanity check for the adapter hardware - check the reaction of
* the bus lines only if it seems to be idle.
*/
-static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
- int scl,sda;
+static int test_bus(struct i2c_algo_bit_data *adap, char *name)
+{
+ int scl, sda;
- if (adap->getscl==NULL)
+ if (adap->getscl == NULL)
pr_info("%s: Testing SDA only, SCL is not readable\n", name);
- sda=getsda(adap);
- scl=(adap->getscl==NULL?1:getscl(adap));
- if (!scl || !sda ) {
+ sda = getsda(adap);
+ scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+ if (!scl || !sda) {
printk(KERN_WARNING "%s: bus seems to be busy\n", name);
goto bailout;
}
sdalo(adap);
- sda=getsda(adap);
- scl=(adap->getscl==NULL?1:getscl(adap));
- if ( 0 != sda ) {
+ sda = getsda(adap);
+ scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+ if (sda) {
printk(KERN_WARNING "%s: SDA stuck high!\n", name);
goto bailout;
}
- if ( 0 == scl ) {
+ if (!scl) {
printk(KERN_WARNING "%s: SCL unexpected low "
"while pulling SDA low!\n", name);
goto bailout;
- }
+ }
sdahi(adap);
- sda=getsda(adap);
- scl=(adap->getscl==NULL?1:getscl(adap));
- if ( 0 == sda ) {
+ sda = getsda(adap);
+ scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+ if (!sda) {
printk(KERN_WARNING "%s: SDA stuck low!\n", name);
goto bailout;
}
- if ( 0 == scl ) {
+ if (!scl) {
printk(KERN_WARNING "%s: SCL unexpected low "
"while pulling SDA high!\n", name);
goto bailout;
}
scllo(adap);
- sda=getsda(adap);
- scl=(adap->getscl==NULL?0:getscl(adap));
- if ( 0 != scl ) {
+ sda = getsda(adap);
+ scl = (adap->getscl == NULL) ? 0 : getscl(adap);
+ if (scl) {
printk(KERN_WARNING "%s: SCL stuck high!\n", name);
goto bailout;
}
- if ( 0 == sda ) {
+ if (!sda) {
printk(KERN_WARNING "%s: SDA unexpected low "
"while pulling SCL low!\n", name);
goto bailout;
}
-
+
sclhi(adap);
- sda=getsda(adap);
- scl=(adap->getscl==NULL?1:getscl(adap));
- if ( 0 == scl ) {
+ sda = getsda(adap);
+ scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+ if (!scl) {
printk(KERN_WARNING "%s: SCL stuck low!\n", name);
goto bailout;
}
- if ( 0 == sda ) {
+ if (!sda) {
printk(KERN_WARNING "%s: SDA unexpected low "
"while pulling SCL high!\n", name);
goto bailout;
@@ -314,9 +320,10 @@
unsigned char addr, int retries)
{
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
- int i,ret = -1;
- for (i=0;i<=retries;i++) {
- ret = i2c_outb(i2c_adap,addr);
+ int i, ret = -1;
+
+ for (i = 0; i <= retries; i++) {
+ ret = i2c_outb(i2c_adap, addr);
if (ret == 1 || i == retries)
break;
bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
@@ -338,20 +345,38 @@
{
const unsigned char *temp = msg->buf;
int count = msg->len;
- unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
+ unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
int retval;
- int wrcount=0;
+ int wrcount = 0;
while (count > 0) {
retval = i2c_outb(i2c_adap, *temp);
- if ((retval>0) || (nak_ok && (retval==0))) { /* ok or ignored NAK */
- count--;
+
+ /* OK/ACK; or ignored NAK */
+ if ((retval > 0) || (nak_ok && (retval == 0))) {
+ count--;
temp++;
wrcount++;
- } else { /* arbitration or no acknowledge */
- dev_err(&i2c_adap->dev, "sendbytes: error - bailout.\n");
- return (retval<0)? retval : -EFAULT;
- /* got a better one ?? */
+
+ /* A slave NAKing the master means the slave didn't like
+ * something about the data it saw. For example, maybe
+ * the SMBus PEC was wrong.
+ */
+ } else if (retval == 0) {
+ dev_err(&i2c_adap->dev, "sendbytes: NAK bailout.\n");
+ return -EIO;
+
+ /* Timeout; or (someday) lost arbitration
+ *
+ * FIXME Lost ARB implies retrying the transaction from
+ * the first message, after the "winning" master issues
+ * its STOP. As a rule, upper layer code has no reason
+ * to know or care about this ... it is *NOT* an error.
+ */
+ } else {
+ dev_err(&i2c_adap->dev, "sendbytes: error %d\n",
+ retval);
+ return retval;
}
}
return wrcount;
@@ -376,14 +401,14 @@
static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
int inval;
- int rdcount=0; /* counts bytes read */
+ int rdcount = 0; /* counts bytes read */
unsigned char *temp = msg->buf;
int count = msg->len;
const unsigned flags = msg->flags;
while (count > 0) {
inval = i2c_inb(i2c_adap);
- if (inval>=0) {
+ if (inval >= 0) {
*temp = inval;
rdcount++;
} else { /* read timed out */
@@ -431,7 +456,7 @@
* returns:
* 0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set
* -x an error occurred (like: -EREMOTEIO if the device did not answer, or
- * -ETIMEDOUT, for example if the lines are stuck...)
+ * -ETIMEDOUT, for example if the lines are stuck...)
*/
static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
@@ -443,10 +468,10 @@
int ret, retries;
retries = nak_ok ? 0 : i2c_adap->retries;
-
- if ( (flags & I2C_M_TEN) ) {
+
+ if (flags & I2C_M_TEN) {
/* a ten bit address */
- addr = 0xf0 | (( msg->addr >> 7) & 0x03);
+ addr = 0xf0 | ((msg->addr >> 7) & 0x03);
bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
/* try extended address code...*/
ret = try_address(i2c_adap, addr, retries);
@@ -456,33 +481,33 @@
return -EREMOTEIO;
}
/* the remaining 8 bit address */
- ret = i2c_outb(i2c_adap,msg->addr & 0x7f);
+ ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
dev_err(&i2c_adap->dev, "died at 2nd address code\n");
return -EREMOTEIO;
}
- if ( flags & I2C_M_RD ) {
+ if (flags & I2C_M_RD) {
bit_dbg(3, &i2c_adap->dev, "emitting repeated "
"start condition\n");
i2c_repstart(adap);
/* okay, now switch into reading mode */
addr |= 0x01;
ret = try_address(i2c_adap, addr, retries);
- if ((ret!=1) && !nak_ok) {
+ if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at repeated address code\n");
return -EREMOTEIO;
}
}
} else { /* normal 7bit address */
- addr = ( msg->addr << 1 );
- if (flags & I2C_M_RD )
+ addr = msg->addr << 1;
+ if (flags & I2C_M_RD)
addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR )
+ if (flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
ret = try_address(i2c_adap, addr, retries);
- if ((ret!=1) && !nak_ok)
+ if ((ret != 1) && !nak_ok)
return -EREMOTEIO;
}
@@ -494,15 +519,14 @@
{
struct i2c_msg *pmsg;
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
-
- int i,ret;
+ int i, ret;
unsigned short nak_ok;
bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
i2c_start(adap);
- for (i=0;i<num;i++) {
+ for (i = 0; i < num; i++) {
pmsg = &msgs[i];
- nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
+ nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
if (!(pmsg->flags & I2C_M_NOSTART)) {
if (i) {
bit_dbg(3, &i2c_adap->dev, "emitting "
@@ -517,7 +541,7 @@
goto bailout;
}
}
- if (pmsg->flags & I2C_M_RD ) {
+ if (pmsg->flags & I2C_M_RD) {
/* read bytes into buffer*/
ret = readbytes(i2c_adap, pmsg);
if (ret >= 1)
@@ -551,7 +575,7 @@
static u32 bit_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_SMBUS_READ_BLOCK_DATA |
I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
@@ -565,8 +589,8 @@
.functionality = bit_func,
};
-/*
- * registering functions to load algorithms at runtime
+/*
+ * registering functions to load algorithms at runtime
*/
static int i2c_bit_prepare_bus(struct i2c_adapter *adap)
{
@@ -574,7 +598,7 @@
if (bit_test) {
int ret = test_bus(bit_adap, adap->name);
- if (ret<0)
+ if (ret < 0)
return -ENODEV;
}
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index ab2e6f3..8907b01 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -203,35 +203,6 @@
/* ----- Utility functions
*/
-static inline int try_address(struct i2c_algo_pcf_data *adap,
- unsigned char addr, int retries)
-{
- int i, status, ret = -1;
- int wfp;
- for (i=0;i<retries;i++) {
- i2c_outb(adap, addr);
- i2c_start(adap);
- status = get_pcf(adap, 1);
- if ((wfp = wait_for_pin(adap, &status)) >= 0) {
- if ((status & I2C_PCF_LRB) == 0) {
- i2c_stop(adap);
- break; /* success! */
- }
- }
- if (wfp == -EINTR) {
- /* arbitration lost */
- udelay(adap->udelay);
- return -EINTR;
- }
- i2c_stop(adap);
- udelay(adap->udelay);
- }
- DEB2(if (i) printk(KERN_DEBUG "i2c-algo-pcf.o: needed %d retries for %d\n",i,
- addr));
- return ret;
-}
-
-
static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
int count, int last)
{
@@ -321,47 +292,19 @@
}
-static inline int pcf_doAddress(struct i2c_algo_pcf_data *adap,
- struct i2c_msg *msg, int retries)
+static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
+ struct i2c_msg *msg)
{
unsigned short flags = msg->flags;
unsigned char addr;
- int ret;
- if ( (flags & I2C_M_TEN) ) {
- /* a ten bit address */
- addr = 0xf0 | (( msg->addr >> 7) & 0x03);
- DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
- /* try extended address code...*/
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk(KERN_ERR "died at extended address code.\n");
- return -EREMOTEIO;
- }
- /* the remaining 8 bit address */
- i2c_outb(adap,msg->addr & 0x7f);
-/* Status check comes here */
- if (ret != 1) {
- printk(KERN_ERR "died at 2nd address code.\n");
- return -EREMOTEIO;
- }
- if ( flags & I2C_M_RD ) {
- i2c_repstart(adap);
- /* okay, now switch into reading mode */
- addr |= 0x01;
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk(KERN_ERR "died at extended address code.\n");
- return -EREMOTEIO;
- }
- }
- } else { /* normal 7bit address */
- addr = ( msg->addr << 1 );
- if (flags & I2C_M_RD )
- addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR )
- addr ^= 1;
- i2c_outb(adap, addr);
- }
+
+ addr = msg->addr << 1;
+ if (flags & I2C_M_RD)
+ addr |= 1;
+ if (flags & I2C_M_REV_DIR_ADDR)
+ addr ^= 1;
+ i2c_outb(adap, addr);
+
return 0;
}
@@ -390,7 +333,7 @@
pmsg->flags & I2C_M_RD ? "read" : "write",
pmsg->len, pmsg->addr, i + 1, num);)
- ret = pcf_doAddress(adap, pmsg, i2c_adap->retries);
+ ret = pcf_doAddress(adap, pmsg);
/* Send START */
if (i == 0) {
@@ -453,7 +396,7 @@
static u32 pcf_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
- I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+ I2C_FUNC_PROTOCOL_MANGLING;
}
/* -----exported algorithm data: ------------------------------------- */
@@ -475,9 +418,7 @@
/* register new adapter to i2c module... */
adap->algo = &pcf_algo;
-
- adap->timeout = 100; /* default values, should */
- adap->retries = 3; /* be replaced by defines */
+ adap->timeout = 100;
if ((rval = pcf_init_8584(pcf_adap)))
return rval;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c466c6c..8d12b26 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -182,7 +182,8 @@
will be called i2c-i801.
config I2C_I810
- tristate "Intel 810/815"
+ tristate "Intel 810/815 (DEPRECATED)"
+ default n
depends on PCI
select I2C_ALGOBIT
help
@@ -195,6 +196,8 @@
i815
i845G
+ This driver is deprecated in favor of the i810fb and intelfb drivers.
+
This driver can also be built as a module. If so, the module
will be called i2c-i810.
@@ -259,20 +262,6 @@
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
-config I2C_IXP4XX
- tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)"
- depends on ARCH_IXP4XX
- select I2C_ALGOBIT
- help
- Say Y here if you have an Intel IXP4xx(420,421,422,425) based
- system and are using GPIO lines for an I2C bus.
-
- This support is also available as a module. If so, the module
- will be called i2c-ixp4xx.
-
- This driver is deprecated and will be dropped soon. Use i2c-gpio
- instead.
-
config I2C_IXP2000
tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
depends on ARCH_IXP2000
@@ -396,7 +385,8 @@
Supports the PA Semi PWRficient on-chip SMBus interfaces.
config I2C_PROSAVAGE
- tristate "S3/VIA (Pro)Savage"
+ tristate "S3/VIA (Pro)Savage (DEPRECATED)"
+ default n
depends on PCI
select I2C_ALGOBIT
help
@@ -407,6 +397,8 @@
S3/VIA KM266/VT8375 aka ProSavage8
S3/VIA KM133/VT8365 aka Savage4
+ This driver is deprecated in favor of the savagefb driver.
+
This support is also available as a module. If so, the module
will be called i2c-prosavage.
@@ -418,13 +410,16 @@
Samsung S3C2410 based System-on-Chip devices.
config I2C_SAVAGE4
- tristate "S3 Savage 4"
- depends on PCI && EXPERIMENTAL
+ tristate "S3 Savage 4 (DEPRECATED)"
+ default n
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
S3 Savage 4 I2C interface.
+ This driver is deprecated in favor of the savagefb driver.
+
This driver can also be built as a module. If so, the module
will be called i2c-savage4.
@@ -611,7 +606,7 @@
VT8231
VT8233/A
VT8235
- VT8237R/A
+ VT8237R/A/S
VT8251
CX700
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 81d43c2..ea7068f 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -20,7 +20,6 @@
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
-obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 7490dc1..573abe4 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -334,6 +334,10 @@
int error;
u8 temp;
+ /* driver_data might come from user-space, so check it */
+ if (id->driver_data > ARRAY_SIZE(chipname))
+ return -EINVAL;
+
if (amd756_ioport) {
dev_err(&pdev->dev, "Only one device supported "
"(you have a strange motherboard, btw)\n");
@@ -405,6 +409,7 @@
.id_table = amd756_ids,
.probe = amd756_probe,
.remove = __devexit_p(amd756_remove),
+ .dynids.use_driver_data = 1,
};
static int __init amd756_init(void)
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 2f68416..1953b26 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -30,14 +30,22 @@
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#include "i2c-au1550.h"
+struct i2c_au1550_data {
+ u32 psc_base;
+ int xfer_timeout;
+ int ack_timeout;
+ struct i2c_adapter adap;
+ struct resource *ioarea;
+};
static int
wait_xfer_done(struct i2c_au1550_data *adap)
@@ -105,7 +113,7 @@
}
static int
-do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd)
+do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
{
volatile psc_smb_t *sp;
u32 stat;
@@ -134,6 +142,10 @@
if (rd)
addr |= 1;
+ /* zero-byte xfers stop immediately */
+ if (q)
+ addr |= PSC_SMBTXRX_STP;
+
/* Put byte into fifo, start up master.
*/
sp->psc_smbtxrx = addr;
@@ -142,7 +154,7 @@
au_sync();
if (wait_ack(adap))
return -EIO;
- return 0;
+ return (q) ? wait_master_done(adap) : 0;
}
static u32
@@ -262,7 +274,8 @@
for (i = 0; !err && i < num; i++) {
p = &msgs[i];
- err = do_address(adap, p->addr, p->flags & I2C_M_RD);
+ err = do_address(adap, p->addr, p->flags & I2C_M_RD,
+ (p->len == 0));
if (err || !p->len)
continue;
if (p->flags & I2C_M_RD)
@@ -294,18 +307,48 @@
* Prior to calling us, the 50MHz clock frequency and routing
* must have been set up for the PSC indicated by the adapter.
*/
-int
-i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
+static int __devinit
+i2c_au1550_probe(struct platform_device *pdev)
{
- struct i2c_au1550_data *adap = i2c_adap->algo_data;
- volatile psc_smb_t *sp;
- u32 stat;
+ struct i2c_au1550_data *priv;
+ volatile psc_smb_t *sp;
+ struct resource *r;
+ u32 stat;
+ int ret;
- i2c_adap->algo = &au1550_algo;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ priv->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+ pdev->name);
+ if (!priv->ioarea) {
+ ret = -EBUSY;
+ goto out_mem;
+ }
+
+ priv->psc_base = r->start;
+ priv->xfer_timeout = 200;
+ priv->ack_timeout = 200;
+
+ priv->adap.id = I2C_HW_AU1550_PSC;
+ priv->adap.nr = pdev->id;
+ priv->adap.algo = &au1550_algo;
+ priv->adap.algo_data = priv;
+ priv->adap.dev.parent = &pdev->dev;
+ strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
/* Now, set up the PSC for SMBus PIO mode.
*/
- sp = (volatile psc_smb_t *)(adap->psc_base);
+ sp = (volatile psc_smb_t *)priv->psc_base;
sp->psc_ctrl = PSC_CTRL_DISABLE;
au_sync();
sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
@@ -343,87 +386,87 @@
au_sync();
} while ((stat & PSC_SMBSTAT_DR) == 0);
- return i2c_add_adapter(i2c_adap);
+ ret = i2c_add_numbered_adapter(&priv->adap);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, priv);
+ return 0;
+ }
+
+ /* disable the PSC */
+ sp->psc_smbcfg = 0;
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+
+ release_resource(priv->ioarea);
+ kfree(priv->ioarea);
+out_mem:
+ kfree(priv);
+out:
+ return ret;
}
-
-int
-i2c_au1550_del_bus(struct i2c_adapter *adap)
+static int __devexit
+i2c_au1550_remove(struct platform_device *pdev)
{
- return i2c_del_adapter(adap);
-}
+ struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
-static int
-pb1550_reg(struct i2c_client *client)
-{
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&priv->adap);
+ sp->psc_smbcfg = 0;
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+ release_resource(priv->ioarea);
+ kfree(priv->ioarea);
+ kfree(priv);
return 0;
}
static int
-pb1550_unreg(struct i2c_client *client)
+i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
{
+ struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+
+ sp->psc_ctrl = PSC_CTRL_SUSPEND;
+ au_sync();
return 0;
}
-static struct i2c_au1550_data pb1550_i2c_info = {
- SMBUS_PSC_BASE, 200, 200
-};
-
-static struct i2c_adapter pb1550_board_adapter = {
- name: "pb1550 adapter",
- id: I2C_HW_AU1550_PSC,
- algo: NULL,
- algo_data: &pb1550_i2c_info,
- client_register: pb1550_reg,
- client_unregister: pb1550_unreg,
-};
-
-/* BIG hack to support the control interface on the Wolfson WM8731
- * audio codec on the Pb1550 board. We get an address and two data
- * bytes to write, create an i2c message, and send it across the
- * i2c transfer function. We do this here because we have access to
- * the i2c adapter structure.
- */
-static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */
-static u8 i2cbuf[2];
-
-int
-pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
+static int
+i2c_au1550_resume(struct platform_device *pdev)
{
- wm_i2c_msg.addr = addr;
- wm_i2c_msg.flags = 0;
- wm_i2c_msg.buf = i2cbuf;
- wm_i2c_msg.len = 2;
- i2cbuf[0] = reg;
- i2cbuf[1] = val;
+ struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
- return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
+ sp->psc_ctrl = PSC_CTRL_ENABLE;
+ au_sync();
+ while (!(sp->psc_smbstat & PSC_SMBSTAT_SR))
+ au_sync();
+ return 0;
}
+static struct platform_driver au1xpsc_smbus_driver = {
+ .driver = {
+ .name = "au1xpsc_smbus",
+ .owner = THIS_MODULE,
+ },
+ .probe = i2c_au1550_probe,
+ .remove = __devexit_p(i2c_au1550_remove),
+ .suspend = i2c_au1550_suspend,
+ .resume = i2c_au1550_resume,
+};
+
static int __init
i2c_au1550_init(void)
{
- printk(KERN_INFO "Au1550 I2C: ");
-
- /* This is where we would set up a 50MHz clock source
- * and routing. On the Pb1550, the SMBus is PSC2, which
- * uses a shared clock with USB. This has been already
- * configured by Yamon as a 48MHz clock, close enough
- * for our work.
- */
- if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
- printk("failed to initialize.\n");
- return -ENODEV;
- }
-
- printk("initialized.\n");
- return 0;
+ return platform_driver_register(&au1xpsc_smbus_driver);
}
static void __exit
i2c_au1550_exit(void)
{
- i2c_au1550_del_bus(&pb1550_board_adapter);
+ platform_driver_unregister(&au1xpsc_smbus_driver);
}
MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
diff --git a/drivers/i2c/busses/i2c-au1550.h b/drivers/i2c/busses/i2c-au1550.h
deleted file mode 100644
index fce15d1..0000000
--- a/drivers/i2c/busses/i2c-au1550.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
- * 2.6 port by Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef I2C_AU1550_H
-#define I2C_AU1550_H
-
-struct i2c_au1550_data {
- u32 psc_base;
- int xfer_timeout;
- int ack_timeout;
-};
-
-int i2c_au1550_add_bus(struct i2c_adapter *);
-int i2c_au1550_del_bus(struct i2c_adapter *);
-
-#endif /* I2C_AU1550_H */
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 67224a4..7dbdaeb 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -550,6 +550,7 @@
p_adap = &iface->adap;
p_adap->id = I2C_HW_BLACKFIN;
+ p_adap->nr = dev->id;
strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
@@ -576,7 +577,7 @@
bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
SSYNC();
- rc = i2c_add_adapter(p_adap);
+ rc = i2c_add_numbered_adapter(p_adap);
if (rc < 0)
free_irq(iface->irq, iface);
else
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 6767988..cce5a61 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -510,7 +510,6 @@
/* FIXME */
adap->timeout = 1;
- adap->retries = 1;
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ac27e5f..aa91579 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -4,6 +4,7 @@
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
+ Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -21,25 +22,34 @@
*/
/*
- SUPPORTED DEVICES PCI ID
- 82801AA 2413
- 82801AB 2423
- 82801BA 2443
- 82801CA/CAM 2483
- 82801DB 24C3 (HW PEC supported)
- 82801EB 24D3 (HW PEC supported)
- 6300ESB 25A4
- ICH6 266A
- ICH7 27DA
- ESB2 269B
- ICH8 283E
- ICH9 2930
- Tolapai 5032
- This driver supports several versions of Intel's I/O Controller Hubs (ICH).
- For SMBus support, they are similar to the PIIX4 and are part
- of Intel's '810' and other chipsets.
- See the file Documentation/i2c/busses/i2c-i801 for details.
- I2C Block Read and Process Call are not supported.
+ Supports the following Intel I/O Controller Hubs (ICH):
+
+ I/O Block I2C
+ region SMBus Block proc. block
+ Chip name PCI ID size PEC buffer call read
+ ----------------------------------------------------------------------
+ 82801AA (ICH) 0x2413 16 no no no no
+ 82801AB (ICH0) 0x2423 16 no no no no
+ 82801BA (ICH2) 0x2443 16 no no no no
+ 82801CA (ICH3) 0x2483 32 soft no no no
+ 82801DB (ICH4) 0x24c3 32 hard yes no no
+ 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ 6300ESB 0x25a4 32 hard yes yes yes
+ 82801F (ICH6) 0x266a 32 hard yes yes yes
+ 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ 82801G (ICH7) 0x27da 32 hard yes yes yes
+ 82801H (ICH8) 0x283e 32 hard yes yes yes
+ 82801I (ICH9) 0x2930 32 hard yes yes yes
+ Tolapai 0x5032 32 hard yes ? ?
+
+ Features supported by this driver:
+ Software PEC no
+ Hardware PEC yes
+ Block buffer yes
+ Block process call transaction no
+ I2C block read transaction yes (doesn't use the block buffer)
+
+ See the file Documentation/i2c/busses/i2c-i801 for details.
*/
/* Note: we assume there can only be one I801, with one SMBus interface */
@@ -62,9 +72,9 @@
#define SMBHSTDAT0 (5 + i801_smba)
#define SMBHSTDAT1 (6 + i801_smba)
#define SMBBLKDAT (7 + i801_smba)
-#define SMBPEC (8 + i801_smba) /* ICH4 only */
-#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */
-#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
+#define SMBPEC (8 + i801_smba) /* ICH3 and later */
+#define SMBAUXSTS (12 + i801_smba) /* ICH4 and later */
+#define SMBAUXCTL (13 + i801_smba) /* ICH4 and later */
/* PCI Address Constants */
#define SMBBAR 4
@@ -91,13 +101,13 @@
#define I801_BYTE 0x04
#define I801_BYTE_DATA 0x08
#define I801_WORD_DATA 0x0C
-#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */
+#define I801_PROC_CALL 0x10 /* unimplemented */
#define I801_BLOCK_DATA 0x14
-#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */
+#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
#define I801_BLOCK_LAST 0x34
-#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */
+#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */
#define I801_START 0x40
-#define I801_PEC_EN 0x80 /* ICH4 only */
+#define I801_PEC_EN 0x80 /* ICH3 and later */
/* I801 Hosts Status register bits */
#define SMBHSTSTS_BYTE_DONE 0x80
@@ -113,7 +123,12 @@
static unsigned char i801_original_hstcfg;
static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
-static int isich4;
+
+#define FEATURE_SMBUS_PEC (1 << 0)
+#define FEATURE_BLOCK_BUFFER (1 << 1)
+#define FEATURE_BLOCK_PROC (1 << 2)
+#define FEATURE_I2C_BLOCK_READ (1 << 3)
+static unsigned int i801_features;
static int i801_transaction(int xact)
{
@@ -242,7 +257,8 @@
}
static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
- char read_write, int hwpec)
+ char read_write, int command,
+ int hwpec)
{
int i, len;
int smbcmd;
@@ -259,16 +275,24 @@
}
for (i = 1; i <= len; i++) {
- if (i == len && read_write == I2C_SMBUS_READ)
- smbcmd = I801_BLOCK_LAST;
- else
- smbcmd = I801_BLOCK_DATA;
+ if (i == len && read_write == I2C_SMBUS_READ) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA)
+ smbcmd = I801_I2C_BLOCK_LAST;
+ else
+ smbcmd = I801_BLOCK_LAST;
+ } else {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+ }
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
+ "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+ inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
@@ -332,7 +356,8 @@
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
- if (i == 1 && read_write == I2C_SMBUS_READ) {
+ if (i == 1 && read_write == I2C_SMBUS_READ
+ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0);
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
return -1;
@@ -353,9 +378,9 @@
temp);
}
dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
+ "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+ inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
if (result < 0)
return result;
@@ -384,33 +409,38 @@
pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
pci_write_config_byte(I801_dev, SMBHSTCFG,
hostc | SMBHSTCFG_I2C_EN);
- } else {
+ } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
dev_err(&I801_dev->dev,
- "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
+ "I2C block read is unsupported!\n");
return -1;
}
}
- if (read_write == I2C_SMBUS_WRITE) {
+ if (read_write == I2C_SMBUS_WRITE
+ || command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (data->block[0] < 1)
data->block[0] = 1;
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
} else {
- data->block[0] = 32; /* max for reads */
+ data->block[0] = 32; /* max for SMBus block reads */
}
- if (isich4 && i801_set_block_buffer_mode() == 0 )
+ if ((i801_features & FEATURE_BLOCK_BUFFER)
+ && !(command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_READ)
+ && i801_set_block_buffer_mode() == 0)
result = i801_block_transaction_by_block(data, read_write,
hwpec);
else
result = i801_block_transaction_byte_by_byte(data, read_write,
- hwpec);
+ command, hwpec);
if (result == 0 && hwpec)
i801_wait_hwpec();
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
}
@@ -426,7 +456,7 @@
int block = 0;
int ret, xact = 0;
- hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+ hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
&& size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
@@ -462,12 +492,23 @@
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
outb_p(command, SMBHSTCMD);
block = 1;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /* NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD);
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1);
+ } else
+ outb_p(command, SMBHSTCMD);
+ block = 1;
+ break;
case I2C_SMBUS_PROC_CALL:
default:
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
@@ -487,7 +528,7 @@
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
time, so we forcibly disable it after every transaction. Turn off
E32B for the same reason. */
- if (hwpec)
+ if (hwpec || block)
outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
SMBAUXCTL);
@@ -514,9 +555,11 @@
static u32 i801_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
- | (isich4 ? I2C_FUNC_SMBUS_PEC : 0);
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((i801_features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
}
static const struct i2c_algorithm smbus_algorithm = {
@@ -556,8 +599,8 @@
int err;
I801_dev = dev;
+ i801_features = 0;
switch (dev->device) {
- case PCI_DEVICE_ID_INTEL_82801DB_3:
case PCI_DEVICE_ID_INTEL_82801EB_3:
case PCI_DEVICE_ID_INTEL_ESB_4:
case PCI_DEVICE_ID_INTEL_ICH6_16:
@@ -565,11 +608,13 @@
case PCI_DEVICE_ID_INTEL_ESB2_17:
case PCI_DEVICE_ID_INTEL_ICH8_5:
case PCI_DEVICE_ID_INTEL_ICH9_6:
+ i801_features |= FEATURE_I2C_BLOCK_READ;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
- isich4 = 1;
+ i801_features |= FEATURE_SMBUS_PEC;
+ i801_features |= FEATURE_BLOCK_BUFFER;
break;
- default:
- isich4 = 0;
}
err = pci_enable_device(dev);
@@ -610,6 +655,11 @@
else
dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+ /* Clear special mode bits */
+ if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
+ SMBAUXCTL);
+
/* set up the sysfs linkage to our parent device */
i801_adapter.dev.parent = &dev->dev;
@@ -678,9 +728,8 @@
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
+ "Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 9b43ff72..7c7eb0c 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -6,7 +6,7 @@
* Copyright (c) 2003, 2004 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Based on original work by
+ * Based on original work by
* Ian DaSilva <idasilva@mvista.com>
* Armin Kuster <akuster@mvista.com>
* Matt Porter <mporter@mvista.com>
@@ -86,8 +86,8 @@
KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n"
KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
- in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
- in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
+ in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
+ in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
in_8(&iic->xtcntlss), in_8(&iic->directcntl));
}
# define DUMP_REGS(h,dev) dump_iic_regs((h),(dev))
@@ -125,7 +125,7 @@
{
out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0);
}
-
+
/*
* Initialize IIC interface.
*/
@@ -134,7 +134,7 @@
volatile struct iic_regs __iomem *iic = dev->vaddr;
DBG("%d: init\n", dev->idx);
-
+
/* Clear master address */
out_8(&iic->lmadr, 0);
out_8(&iic->hmadr, 0);
@@ -160,7 +160,7 @@
/* Clear control register */
out_8(&iic->cntl, 0);
-
+
/* Enable interrupts if possible */
iic_interrupt_mode(dev, dev->irq >= 0);
@@ -171,7 +171,7 @@
DUMP_REGS("iic_init", dev);
}
-/*
+/*
* Reset IIC interface
*/
static void iic_dev_reset(struct ibm_iic_private* dev)
@@ -179,42 +179,42 @@
volatile struct iic_regs __iomem *iic = dev->vaddr;
int i;
u8 dc;
-
+
DBG("%d: soft reset\n", dev->idx);
DUMP_REGS("reset", dev);
-
+
/* Place chip in the reset state */
out_8(&iic->xtcntlss, XTCNTLSS_SRST);
-
+
/* Check if bus is free */
- dc = in_8(&iic->directcntl);
+ dc = in_8(&iic->directcntl);
if (!DIRCTNL_FREE(dc)){
DBG("%d: trying to regain bus control\n", dev->idx);
-
+
/* Try to set bus free state */
- out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
-
+ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
/* Wait until we regain bus control */
for (i = 0; i < 100; ++i){
dc = in_8(&iic->directcntl);
if (DIRCTNL_FREE(dc))
break;
-
+
/* Toggle SCL line */
dc ^= DIRCNTL_SCC;
out_8(&iic->directcntl, dc);
udelay(10);
dc ^= DIRCNTL_SCC;
out_8(&iic->directcntl, dc);
-
+
/* be nice */
cond_resched();
}
}
-
+
/* Remove reset */
out_8(&iic->xtcntlss, 0);
-
+
/* Reinitialize interface */
iic_dev_init(dev);
}
@@ -324,14 +324,14 @@
{
struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id;
volatile struct iic_regs __iomem *iic = dev->vaddr;
-
- DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n",
+
+ DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n",
dev->idx, in_8(&iic->sts), in_8(&iic->extsts));
-
+
/* Acknowledge IRQ and wakeup iic_wait_for_tc */
out_8(&iic->sts, STS_IRQA | STS_SCMP);
wake_up_interruptible(&dev->wq);
-
+
return IRQ_HANDLED;
}
@@ -341,19 +341,19 @@
*/
static int iic_xfer_result(struct ibm_iic_private* dev)
{
- volatile struct iic_regs __iomem *iic = dev->vaddr;
-
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+
if (unlikely(in_8(&iic->sts) & STS_ERR)){
- DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx,
+ DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx,
in_8(&iic->extsts));
-
+
/* Clear errors and possible pending IRQs */
- out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD |
+ out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD |
EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA);
-
+
/* Flush master data buffer */
out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
-
+
/* Is bus free?
* If error happened during combined xfer
* IIC interface is usually stuck in some strange
@@ -376,11 +376,11 @@
{
volatile struct iic_regs __iomem *iic = dev->vaddr;
unsigned long x;
-
+
DBG("%d: iic_abort_xfer\n", dev->idx);
-
+
out_8(&iic->cntl, CNTL_HMT);
-
+
/*
* Wait for the abort command to complete.
* It's not worth to be optimized, just poll (timeout >= 1 tick)
@@ -405,13 +405,13 @@
* Returns the number of transferred bytes or error (<0)
*/
static int iic_wait_for_tc(struct ibm_iic_private* dev){
-
+
volatile struct iic_regs __iomem *iic = dev->vaddr;
int ret = 0;
-
+
if (dev->irq >= 0){
/* Interrupt mode */
- ret = wait_event_interruptible_timeout(dev->wq,
+ ret = wait_event_interruptible_timeout(dev->wq,
!(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
if (unlikely(ret < 0))
@@ -424,37 +424,37 @@
else {
/* Polling mode */
unsigned long x = jiffies + dev->adap.timeout * HZ;
-
+
while (in_8(&iic->sts) & STS_PT){
if (unlikely(time_after(jiffies, x))){
DBG("%d: poll timeout\n", dev->idx);
ret = -ETIMEDOUT;
break;
}
-
+
if (unlikely(signal_pending(current))){
DBG("%d: poll interrupted\n", dev->idx);
ret = -ERESTARTSYS;
break;
}
schedule();
- }
+ }
}
-
+
if (unlikely(ret < 0))
iic_abort_xfer(dev);
else
ret = iic_xfer_result(dev);
-
+
DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret);
-
+
return ret;
}
/*
* Low level master transfer routine
*/
-static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
+static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
int combined_xfer)
{
volatile struct iic_regs __iomem *iic = dev->vaddr;
@@ -465,48 +465,48 @@
u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT;
if (pm->flags & I2C_M_RD)
cntl |= CNTL_RW;
-
+
loops = (len + 3) / 4;
for (i = 0; i < loops; ++i, len -= 4){
int count = len > 4 ? 4 : len;
u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT);
-
+
if (!(cntl & CNTL_RW))
for (j = 0; j < count; ++j)
out_8((void __iomem *)&iic->mdbuf, *buf++);
-
+
if (i < loops - 1)
cmd |= CNTL_CHT;
else if (combined_xfer)
cmd |= CNTL_RPST;
-
+
DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd);
-
+
/* Start transfer */
out_8(&iic->cntl, cmd);
-
+
/* Wait for completion */
ret = iic_wait_for_tc(dev);
if (unlikely(ret < 0))
break;
else if (unlikely(ret != count)){
- DBG("%d: xfer_bytes, requested %d, transfered %d\n",
+ DBG("%d: xfer_bytes, requested %d, transfered %d\n",
dev->idx, count, ret);
-
+
/* If it's not a last part of xfer, abort it */
if (combined_xfer || (i < loops - 1))
iic_abort_xfer(dev);
-
+
ret = -EREMOTEIO;
- break;
+ break;
}
-
+
if (cntl & CNTL_RW)
for (j = 0; j < count; ++j)
*buf++ = in_8((void __iomem *)&iic->mdbuf);
}
-
+
return ret > 0 ? 0 : ret;
}
@@ -517,10 +517,10 @@
{
volatile struct iic_regs __iomem *iic = dev->vaddr;
u16 addr = msg->addr;
-
- DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx,
+
+ DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx,
addr, msg->flags & I2C_M_TEN ? 10 : 7);
-
+
if (msg->flags & I2C_M_TEN){
out_8(&iic->cntl, CNTL_AMD);
out_8(&iic->lmadr, addr);
@@ -537,15 +537,15 @@
return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f));
}
-static inline int iic_address_neq(const struct i2c_msg* p1,
+static inline int iic_address_neq(const struct i2c_msg* p1,
const struct i2c_msg* p2)
{
- return (p1->addr != p2->addr)
+ return (p1->addr != p2->addr)
|| ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN));
-}
+}
/*
- * Generic master transfer entrypoint.
+ * Generic master transfer entrypoint.
* Returns the number of processed messages or error (<0)
*/
static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
@@ -553,20 +553,20 @@
struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap));
volatile struct iic_regs __iomem *iic = dev->vaddr;
int i, ret = 0;
-
+
DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
-
+
if (!num)
return 0;
-
+
/* Check the sanity of the passed messages.
* Uhh, generic i2c layer is more suitable place for such code...
*/
if (unlikely(iic_invalid_address(&msgs[0]))){
- DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx,
+ DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx,
msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7);
return -EINVAL;
- }
+ }
for (i = 0; i < num; ++i){
if (unlikely(msgs[i].len <= 0)){
if (num == 1 && !msgs[0].len){
@@ -576,7 +576,7 @@
*/
return iic_smbus_quick(dev, &msgs[0]);
}
- DBG("%d: invalid len %d in msg[%d]\n", dev->idx,
+ DBG("%d: invalid len %d in msg[%d]\n", dev->idx,
msgs[i].len, i);
return -EINVAL;
}
@@ -585,34 +585,34 @@
return -EINVAL;
}
}
-
+
/* Check bus state */
if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
DBG("%d: iic_xfer, bus is not free\n", dev->idx);
-
+
/* Usually it means something serious has happend.
* We *cannot* have unfinished previous transfer
* so it doesn't make any sense to try to stop it.
- * Probably we were not able to recover from the
+ * Probably we were not able to recover from the
* previous error.
* The only *reasonable* thing I can think of here
* is soft reset. --ebs
*/
iic_dev_reset(dev);
-
+
if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
DBG("%d: iic_xfer, bus is still not free\n", dev->idx);
return -EREMOTEIO;
}
- }
+ }
else {
/* Flush master data buffer (just in case) */
out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
}
-
+
/* Load slave address */
iic_address(dev, &msgs[0]);
-
+
/* Do real transfer */
for (i = 0; i < num && !ret; ++i)
ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1);
@@ -648,7 +648,7 @@
/* Convert to MHz */
opb /= 1000000;
-
+
if (opb < 20 || opb > 150){
printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n",
opb);
@@ -666,7 +666,7 @@
struct i2c_adapter* adap;
struct ocp_func_iic_data* iic_data = ocp->def->additions;
int ret;
-
+
if (!iic_data)
printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
ocp->def->index);
@@ -679,7 +679,7 @@
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
-
+
if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
"ibm_iic")) {
ret = -EBUSY;
@@ -692,7 +692,7 @@
ret = -ENXIO;
goto fail2;
}
-
+
init_waitqueue_head(&dev->wq);
dev->irq = iic_force_poll ? -1 : ocp->def->irq;
@@ -702,29 +702,29 @@
*/
iic_interrupt_mode(dev, 0);
if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
- printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
+ printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
dev->idx, dev->irq);
- /* Fallback to the polling mode */
+ /* Fallback to the polling mode */
dev->irq = -1;
}
}
-
+
if (dev->irq < 0)
- printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
+ printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
dev->idx);
-
+
/* Board specific settings */
dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
-
- /* clckdiv is the same for *all* IIC interfaces,
+
+ /* clckdiv is the same for *all* IIC interfaces,
* but I'd rather make a copy than introduce another global. --ebs
*/
dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
-
+
/* Initialize IIC interface */
iic_dev_init(dev);
-
+
/* Register it with i2c layer */
adap = &dev->adap;
adap->dev.parent = &ocp->dev;
@@ -736,7 +736,6 @@
adap->client_register = NULL;
adap->client_unregister = NULL;
adap->timeout = 1;
- adap->retries = 1;
/*
* If "dev->idx" is negative we consider it as zero.
@@ -750,24 +749,24 @@
dev->idx);
goto fail;
}
-
+
printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
return 0;
-fail:
+fail:
if (dev->irq >= 0){
iic_interrupt_mode(dev, 0);
free_irq(dev->irq, dev);
- }
+ }
iounmap(dev->vaddr);
-fail2:
+fail2:
release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
fail1:
ocp_set_drvdata(ocp, NULL);
- kfree(dev);
+ kfree(dev);
return ret;
}
@@ -783,13 +782,13 @@
dev->idx);
/* That's *very* bad, just shutdown IRQ ... */
if (dev->irq >= 0){
- iic_interrupt_mode(dev, 0);
+ iic_interrupt_mode(dev, 0);
free_irq(dev->irq, dev);
dev->irq = -1;
}
} else {
if (dev->irq >= 0){
- iic_interrupt_mode(dev, 0);
+ iic_interrupt_mode(dev, 0);
free_irq(dev->irq, dev);
}
iounmap(dev->vaddr);
@@ -798,7 +797,7 @@
}
}
-static struct ocp_device_id ibm_iic_ids[] __devinitdata =
+static struct ocp_device_id ibm_iic_ids[] __devinitdata =
{
{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
{ .vendor = OCP_VENDOR_INVALID }
diff --git a/drivers/i2c/busses/i2c-ibm_iic.h b/drivers/i2c/busses/i2c-ibm_iic.h
index 59d7b43..fdaa482 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.h
+++ b/drivers/i2c/busses/i2c-ibm_iic.h
@@ -2,11 +2,11 @@
* drivers/i2c/busses/i2c-ibm_iic.h
*
* Support for the IIC peripheral on IBM PPC 4xx
- *
+ *
* Copyright (c) 2003 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Based on original work by
+ * Based on original work by
* Ian DaSilva <idasilva@mvista.com>
* Armin Kuster <akuster@mvista.com>
* Matt Porter <mporter@mvista.com>
@@ -22,7 +22,7 @@
#ifndef __I2C_IBM_IIC_H_
#define __I2C_IBM_IIC_H_
-#include <linux/i2c.h>
+#include <linux/i2c.h>
struct iic_regs {
u16 mdbuf;
@@ -58,7 +58,7 @@
#define CNTL_TCT_MASK 0x30
#define CNTL_TCT_SHIFT 4
#define CNTL_RPST 0x08
-#define CNTL_CHT 0x04
+#define CNTL_CHT 0x04
#define CNTL_RW 0x02
#define CNTL_PT 0x01
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index c70146e..ab41400 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -490,7 +490,6 @@
* Default values...should these come in from board code?
*/
new_adapter->timeout = 100;
- new_adapter->retries = 3;
new_adapter->algo = &iop3xx_i2c_algo;
init_waitqueue_head(&adapter_data->waitq);
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
deleted file mode 100644
index 069ed7f..0000000
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-ixp4xx.c
- *
- * Intel's IXP4xx XScale NPU chipsets (IXP420, 421, 422, 425) do not have
- * an on board I2C controller but provide 16 GPIO pins that are often
- * used to create an I2C bus. This driver provides an i2c_adapter
- * interface that plugs in under algo_bit and drives the GPIO pins
- * as instructed by the alogorithm driver.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (c) 2003-2004 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * NOTE: Since different platforms will use different GPIO pins for
- * I2C, this driver uses an IXP4xx-specific platform_data
- * pointer to pass the GPIO numbers to the driver. This
- * allows us to support all the different IXP4xx platforms
- * w/o having to put #ifdefs in this driver.
- *
- * See arch/arm/mach-ixp4xx/ixdp425.c for an example of building a
- * device list and filling in the ixp4xx_i2c_pins data structure
- * that is passed as the platform_data to this driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-#include <asm/hardware.h> /* Pick up IXP4xx-specific bits */
-
-static inline int ixp4xx_scl_pin(void *data)
-{
- return ((struct ixp4xx_i2c_pins*)data)->scl_pin;
-}
-
-static inline int ixp4xx_sda_pin(void *data)
-{
- return ((struct ixp4xx_i2c_pins*)data)->sda_pin;
-}
-
-static void ixp4xx_bit_setscl(void *data, int val)
-{
- gpio_line_set(ixp4xx_scl_pin(data), 0);
- gpio_line_config(ixp4xx_scl_pin(data),
- val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT );
-}
-
-static void ixp4xx_bit_setsda(void *data, int val)
-{
- gpio_line_set(ixp4xx_sda_pin(data), 0);
- gpio_line_config(ixp4xx_sda_pin(data),
- val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT );
-}
-
-static int ixp4xx_bit_getscl(void *data)
-{
- int scl;
-
- gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_IN );
- gpio_line_get(ixp4xx_scl_pin(data), &scl);
-
- return scl;
-}
-
-static int ixp4xx_bit_getsda(void *data)
-{
- int sda;
-
- gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_IN );
- gpio_line_get(ixp4xx_sda_pin(data), &sda);
-
- return sda;
-}
-
-struct ixp4xx_i2c_data {
- struct ixp4xx_i2c_pins *gpio_pins;
- struct i2c_adapter adapter;
- struct i2c_algo_bit_data algo_data;
-};
-
-static int ixp4xx_i2c_remove(struct platform_device *plat_dev)
-{
- struct ixp4xx_i2c_data *drv_data = platform_get_drvdata(plat_dev);
-
- platform_set_drvdata(plat_dev, NULL);
-
- i2c_del_adapter(&drv_data->adapter);
-
- kfree(drv_data);
-
- return 0;
-}
-
-static int ixp4xx_i2c_probe(struct platform_device *plat_dev)
-{
- int err;
- struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data;
- struct ixp4xx_i2c_data *drv_data =
- kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
-
- if(!drv_data)
- return -ENOMEM;
-
- drv_data->gpio_pins = gpio;
-
- /*
- * We could make a lot of these structures static, but
- * certain platforms may have multiple GPIO-based I2C
- * buses for various device domains, so we need per-device
- * algo_data->data.
- */
- drv_data->algo_data.data = gpio;
- drv_data->algo_data.setsda = ixp4xx_bit_setsda;
- drv_data->algo_data.setscl = ixp4xx_bit_setscl;
- drv_data->algo_data.getsda = ixp4xx_bit_getsda;
- drv_data->algo_data.getscl = ixp4xx_bit_getscl;
- drv_data->algo_data.udelay = 10;
- drv_data->algo_data.timeout = 100;
-
- drv_data->adapter.id = I2C_HW_B_IXP4XX;
- drv_data->adapter.class = I2C_CLASS_HWMON;
- strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
- sizeof(drv_data->adapter.name));
- drv_data->adapter.algo_data = &drv_data->algo_data;
-
- drv_data->adapter.dev.parent = &plat_dev->dev;
-
- gpio_line_config(gpio->scl_pin, IXP4XX_GPIO_IN);
- gpio_line_config(gpio->sda_pin, IXP4XX_GPIO_IN);
- gpio_line_set(gpio->scl_pin, 0);
- gpio_line_set(gpio->sda_pin, 0);
-
- err = i2c_bit_add_bus(&drv_data->adapter);
- if (err) {
- printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id);
-
- kfree(drv_data);
- return err;
- }
-
- platform_set_drvdata(plat_dev, drv_data);
-
- return 0;
-}
-
-static struct platform_driver ixp4xx_i2c_driver = {
- .probe = ixp4xx_i2c_probe,
- .remove = ixp4xx_i2c_remove,
- .driver = {
- .name = "IXP4XX-I2C",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init ixp4xx_i2c_init(void)
-{
- return platform_driver_register(&ixp4xx_i2c_driver);
-}
-
-static void __exit ixp4xx_i2c_exit(void)
-{
- platform_driver_unregister(&ixp4xx_i2c_driver);
-}
-
-module_init(ixp4xx_i2c_init);
-module_exit(ixp4xx_i2c_exit);
-
-MODULE_DESCRIPTION("GPIO-based I2C adapter for IXP4xx systems");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
-
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index d8de4ac..bbe787b 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -180,7 +180,7 @@
static int mpc_write(struct mpc_i2c *i2c, int target,
const u8 * data, int length, int restart)
{
- int i;
+ int i, result;
unsigned timeout = i2c->adap.timeout;
u32 flags = restart ? CCR_RSTA : 0;
@@ -192,15 +192,17 @@
/* Write target byte */
writeb((target << 1), i2c->base + MPC_I2C_DR);
- if (i2c_wait(i2c, timeout, 1) < 0)
- return -1;
+ result = i2c_wait(i2c, timeout, 1);
+ if (result < 0)
+ return result;
for (i = 0; i < length; i++) {
/* Write data byte */
writeb(data[i], i2c->base + MPC_I2C_DR);
- if (i2c_wait(i2c, timeout, 1) < 0)
- return -1;
+ result = i2c_wait(i2c, timeout, 1);
+ if (result < 0)
+ return result;
}
return 0;
@@ -210,7 +212,7 @@
u8 * data, int length, int restart)
{
unsigned timeout = i2c->adap.timeout;
- int i;
+ int i, result;
u32 flags = restart ? CCR_RSTA : 0;
/* Start with MEN */
@@ -221,8 +223,9 @@
/* Write target address byte - this time with the read flag set */
writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
- if (i2c_wait(i2c, timeout, 1) < 0)
- return -1;
+ result = i2c_wait(i2c, timeout, 1);
+ if (result < 0)
+ return result;
if (length) {
if (length == 1)
@@ -234,8 +237,9 @@
}
for (i = 0; i < length; i++) {
- if (i2c_wait(i2c, timeout, 0) < 0)
- return -1;
+ result = i2c_wait(i2c, timeout, 0);
+ if (result < 0)
+ return result;
/* Generate txack on next to last byte */
if (i == length - 2)
@@ -309,7 +313,6 @@
.algo = &mpc_algo,
.class = I2C_CLASS_HWMON,
.timeout = 1,
- .retries = 1
};
static int fsl_i2c_probe(struct platform_device *pdev)
@@ -321,9 +324,9 @@
pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
- if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) {
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
return -ENOMEM;
- }
i2c->irq = platform_get_irq(pdev, 0);
if (i2c->irq < 0) {
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 1bf590c..3dac920 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -351,6 +351,7 @@
pci_set_drvdata(dev, smbuses);
switch(dev->device) {
+ case PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS:
case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS:
case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS:
smbuses[0].blockops = 1;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index f2552b1..da66397 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -362,8 +362,6 @@
omap_i2c_enable_clocks(dev);
- /* REVISIT: initialize and use adap->retries. This is an optional
- * feature */
if ((r = omap_i2c_wait_for_bb(dev)) < 0)
goto out;
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index ca18e0b..1603c81 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -368,6 +368,7 @@
smbus->adapter.class = I2C_CLASS_HWMON;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
+ smbus->adapter.nr = PCI_FUNC(dev->devfn);
/* set up the sysfs linkage to our parent device */
smbus->adapter.dev.parent = &dev->dev;
@@ -375,7 +376,7 @@
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
- error = i2c_add_adapter(&smbus->adapter);
+ error = i2c_add_numbered_adapter(&smbus->adapter);
if (error)
goto out_release_region;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 167e413..9bbe96c 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -121,10 +121,6 @@
{
unsigned char temp;
- /* match up the function */
- if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data)
- return -ENODEV;
-
dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev));
/* Don't access SMBus on IBM systems which get corrupted eeproms */
@@ -389,28 +385,21 @@
};
static struct pci_device_id piix4_ids[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
- .driver_data = 3 },
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
- .driver_data = 3 },
- { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),
- .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_OSB4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_CSB5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_CSB6) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 6426a61..2598d29 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -65,6 +65,7 @@
unsigned long iosize;
int irq;
+ int use_pio;
};
#define _IBMR(i2c) ((i2c)->reg_base + 0)
@@ -163,6 +164,7 @@
#define eedbg(lvl, x...) do { if ((lvl) < 1) { printk(KERN_DEBUG "" x); } } while(0)
static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
+static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
{
@@ -554,6 +556,71 @@
writel(icr, _ICR(i2c));
}
+static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
+{
+ /* make timeout the same as for interrupt based functions */
+ long timeout = 2 * DEF_TIMEOUT;
+
+ /*
+ * Wait for the bus to become free.
+ */
+ while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
+ udelay(1000);
+ show_state(i2c);
+ }
+
+ if (timeout <= 0) {
+ show_state(i2c);
+ dev_err(&i2c->adap.dev,
+ "i2c_pxa: timeout waiting for bus free\n");
+ return I2C_RETRY;
+ }
+
+ /*
+ * Set master mode.
+ */
+ writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
+
+ return 0;
+}
+
+static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
+ struct i2c_msg *msg, int num)
+{
+ unsigned long timeout = 500000; /* 5 seconds */
+ int ret = 0;
+
+ ret = i2c_pxa_pio_set_master(i2c);
+ if (ret)
+ goto out;
+
+ i2c->msg = msg;
+ i2c->msg_num = num;
+ i2c->msg_idx = 0;
+ i2c->msg_ptr = 0;
+ i2c->irqlogidx = 0;
+
+ i2c_pxa_start_message(i2c);
+
+ while (timeout-- && i2c->msg_num > 0) {
+ i2c_pxa_handler(0, i2c);
+ udelay(10);
+ }
+
+ i2c_pxa_stop_message(i2c);
+
+ /*
+ * We place the return code in i2c->msg_idx.
+ */
+ ret = i2c->msg_idx;
+
+out:
+ if (timeout == 0)
+ i2c_pxa_scream_blue_murder(i2c, "timeout");
+
+ return ret;
+}
+
/*
* We are protected by the adapter bus mutex.
*/
@@ -610,6 +677,35 @@
return ret;
}
+static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct pxa_i2c *i2c = adap->algo_data;
+ int ret, i;
+
+ /* If the I2C controller is disabled we need to reset it
+ (probably due to a suspend/resume destroying state). We do
+ this here as we can then avoid worrying about resuming the
+ controller before its users. */
+ if (!(readl(_ICR(i2c)) & ICR_IUE))
+ i2c_pxa_reset(i2c);
+
+ for (i = adap->retries; i >= 0; i--) {
+ ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
+ if (ret != I2C_RETRY)
+ goto out;
+
+ if (i2c_debug)
+ dev_dbg(&adap->dev, "Retrying transmission\n");
+ udelay(100);
+ }
+ i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
+ ret = -EREMOTEIO;
+ out:
+ i2c_pxa_set_slave(i2c, ret);
+ return ret;
+}
+
/*
* i2c_pxa_master_complete - complete the message and wake up.
*/
@@ -621,7 +717,8 @@
i2c->msg_num = 0;
if (ret)
i2c->msg_idx = ret;
- wake_up(&i2c->wait);
+ if (!i2c->use_pio)
+ wake_up(&i2c->wait);
}
static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
@@ -840,6 +937,37 @@
.functionality = i2c_pxa_functionality,
};
+static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
+ .master_xfer = i2c_pxa_pio_xfer,
+ .functionality = i2c_pxa_functionality,
+};
+
+static void i2c_pxa_enable(struct platform_device *dev)
+{
+ if (cpu_is_pxa27x()) {
+ switch (dev->id) {
+ case 0:
+ pxa_gpio_mode(GPIO117_I2CSCL_MD);
+ pxa_gpio_mode(GPIO118_I2CSDA_MD);
+ break;
+ case 1:
+ local_irq_disable();
+ PCFR |= PCFR_PI2CEN;
+ local_irq_enable();
+ break;
+ }
+ }
+}
+
+static void i2c_pxa_disable(struct platform_device *dev)
+{
+ if (cpu_is_pxa27x() && dev->id == 1) {
+ local_irq_disable();
+ PCFR &= ~PCFR_PI2CEN;
+ local_irq_enable();
+ }
+}
+
#define res_len(r) ((r)->end - (r)->start + 1)
static int i2c_pxa_probe(struct platform_device *dev)
{
@@ -864,7 +992,6 @@
}
i2c->adap.owner = THIS_MODULE;
- i2c->adap.algo = &i2c_pxa_algorithm;
i2c->adap.retries = 5;
spin_lock_init(&i2c->lock);
@@ -899,34 +1026,28 @@
#endif
clk_enable(i2c->clk);
-#ifdef CONFIG_PXA27x
- switch (dev->id) {
- case 0:
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
- break;
- case 1:
- local_irq_disable();
- PCFR |= PCFR_PI2CEN;
- local_irq_enable();
+ i2c_pxa_enable(dev);
+
+ if (plat) {
+ i2c->adap.class = plat->class;
+ i2c->use_pio = plat->use_pio;
}
-#endif
- ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
- i2c->adap.name, i2c);
- if (ret)
- goto ereqirq;
-
+ if (i2c->use_pio) {
+ i2c->adap.algo = &i2c_pxa_pio_algorithm;
+ } else {
+ i2c->adap.algo = &i2c_pxa_algorithm;
+ ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
+ i2c->adap.name, i2c);
+ if (ret)
+ goto ereqirq;
+ }
i2c_pxa_reset(i2c);
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &dev->dev;
- if (plat) {
- i2c->adap.class = plat->class;
- }
-
/*
* If "dev->id" is negative we consider it as zero.
* The reason to do so is to avoid sysfs names that only make
@@ -952,17 +1073,11 @@
return 0;
eadapt:
- free_irq(irq, i2c);
+ if (!i2c->use_pio)
+ free_irq(irq, i2c);
ereqirq:
clk_disable(i2c->clk);
-
-#ifdef CONFIG_PXA27x
- if (dev->id == 1) {
- local_irq_disable();
- PCFR &= ~PCFR_PI2CEN;
- local_irq_enable();
- }
-#endif
+ i2c_pxa_disable(dev);
eremap:
clk_put(i2c->clk);
eclk:
@@ -979,18 +1094,12 @@
platform_set_drvdata(dev, NULL);
i2c_del_adapter(&i2c->adap);
- free_irq(i2c->irq, i2c);
+ if (!i2c->use_pio)
+ free_irq(i2c->irq, i2c);
clk_disable(i2c->clk);
clk_put(i2c->clk);
-
-#ifdef CONFIG_PXA27x
- if (dev->id == 1) {
- local_irq_disable();
- PCFR &= ~PCFR_PI2CEN;
- local_irq_enable();
- }
-#endif
+ i2c_pxa_disable(dev);
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 503a134..8fbbdb4 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -36,14 +36,6 @@
/* ----- global defines ----------------------------------------------- */
#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-/* ----- global variables --------------------------------------------- */
-
-/* module parameters:
- */
-static int bit_scan; /* have a look at what's hanging 'round */
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-
static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
unsigned short flags, char read_write,
@@ -140,9 +132,8 @@
/*
* registering functions to load algorithms at runtime
*/
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
{
- int i;
struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
/* register new adapter to i2c module... */
@@ -152,24 +143,6 @@
csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
- /* scan bus */
- if (bit_scan) {
- union i2c_smbus_data data;
- int rc;
- printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
- i2c_adap->name);
- for (i = 0x00; i < 0x7f; i++) {
- /* XXXKW is this a realistic probe? */
- rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!rc) {
- printk("(%02x)",i);
- } else
- printk(".");
- }
- printk("\n");
- }
-
return i2c_add_adapter(i2c_adap);
}
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index 84df29d..c2a9f8c 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -1,8 +1,8 @@
/*
- i2c-stub.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
+ i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+ Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -37,8 +37,8 @@
struct stub_chip {
u8 pointer;
- u8 bytes[256];
- u16 words[256];
+ u16 words[256]; /* Byte operations use the LSB as per SMBus
+ specification */
};
static struct stub_chip *stub_chips;
@@ -75,7 +75,7 @@
"wrote 0x%02x.\n",
addr, command);
} else {
- data->byte = chip->bytes[chip->pointer++];
+ data->byte = chip->words[chip->pointer++] & 0xff;
dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
"read 0x%02x.\n",
addr, data->byte);
@@ -86,12 +86,13 @@
case I2C_SMBUS_BYTE_DATA:
if (read_write == I2C_SMBUS_WRITE) {
- chip->bytes[command] = data->byte;
+ chip->words[command] &= 0xff00;
+ chip->words[command] |= data->byte;
dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
"wrote 0x%02x at 0x%02x.\n",
addr, data->byte, command);
} else {
- data->byte = chip->bytes[command];
+ data->byte = chip->words[command] & 0xff;
dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
"read 0x%02x at 0x%02x.\n",
addr, data->byte, command);
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index c9ce77f..77b13d0 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -4,7 +4,7 @@
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
- Copyright (C) 2005 - 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2005 - 2008 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -35,6 +35,7 @@
VT8235 0x3177 yes
VT8237R 0x3227 yes
VT8237A 0x3337 yes
+ VT8237S 0x3372 yes
VT8251 0x3287 yes
CX700 0x8324 yes
@@ -318,6 +319,10 @@
unsigned char temp;
int error = -ENODEV;
+ /* driver_data might come from user-space, so check it */
+ if (id->driver_data & 1 || id->driver_data > 0xff)
+ return -EINVAL;
+
/* Determine the address of the SMBus areas */
if (force_addr) {
vt596_smba = force_addr & 0xfff0;
@@ -389,6 +394,7 @@
case PCI_DEVICE_ID_VIA_8251:
case PCI_DEVICE_ID_VIA_8237:
case PCI_DEVICE_ID_VIA_8237A:
+ case PCI_DEVICE_ID_VIA_8237S:
case PCI_DEVICE_ID_VIA_8235:
case PCI_DEVICE_ID_VIA_8233A:
case PCI_DEVICE_ID_VIA_8233_0:
@@ -440,6 +446,8 @@
.driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
.driver_data = SMBBA3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237S),
+ .driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
.driver_data = SMBBA1 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
@@ -455,6 +463,7 @@
.name = "vt596_smbus",
.id_table = vt596_ids,
.probe = vt596_probe,
+ .dynids.use_driver_data = 1,
};
static int __init i2c_vt596_init(void)
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 2e1c24f..bd7082c 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -4,32 +4,6 @@
menu "Miscellaneous I2C Chip support"
-config SENSORS_DS1337
- tristate "Dallas DS1337 and DS1339 Real Time Clock (DEPRECATED)"
- depends on EXPERIMENTAL
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1337 and DS1339 real-time clock chips.
-
- This driver can also be built as a module. If so, the module
- will be called ds1337.
-
- This driver is deprecated and will be dropped soon. Use
- rtc-ds1307 instead.
-
-config SENSORS_DS1374
- tristate "Dallas DS1374 Real Time Clock (DEPRECATED)"
- depends on EXPERIMENTAL
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1374 real-time clock chips.
-
- This driver can also be built as a module. If so, the module
- will be called ds1374.
-
- This driver is deprecated and will be dropped soon. Use
- rtc-ds1374 instead.
-
config DS1682
tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
depends on EXPERIMENTAL
@@ -57,7 +31,7 @@
default n
help
If you say yes here you get support for Philips PCF8574 and
- PCF8574A chips.
+ PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus.
This driver can also be built as a module. If so, the module
will be called pcf8574.
@@ -65,6 +39,20 @@
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config PCF8575
+ tristate "Philips PCF8575"
+ default n
+ help
+ If you say yes here you get support for Philips PCF8575 chip.
+ This chip is a 16-bit I/O expander for the I2C bus. Several other
+ chip manufacturers sell equivalent chips, e.g. Texas Instruments.
+
+ This driver can also be built as a module. If so, the module
+ will be called pcf8575.
+
+ This device is hard to detect and is rarely found on mainstream
+ hardware. If unsure, say N.
+
config SENSORS_PCA9539
tristate "Philips PCA9539 16-bit I/O port"
depends on EXPERIMENTAL
@@ -100,12 +88,8 @@
This driver can also be built as a module. If so, the module
will be called isp1301_omap.
-# NOTE: This isn't really OMAP-specific, except for the current
-# interface location in <include/asm-arm/arch-omap/tps65010.h>
-# and having mostly OMAP-specific board support
config TPS65010
tristate "TPS6501x Power Management chips"
- depends on ARCH_OMAP
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
@@ -116,18 +100,6 @@
This driver can also be built as a module. If so, the module
will be called tps65010.
-config SENSORS_M41T00
- tristate "ST M41T00 RTC chip (DEPRECATED)"
- depends on PPC32
- help
- If you say yes here you get support for the ST M41T00 RTC chip.
-
- This driver can also be built as a module. If so, the module
- will be called m41t00.
-
- This driver is deprecated and will be dropped soon. Use
- rtc-ds1307 or rtc-m41t80 instead.
-
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index ca924e1..501f00c 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -2,14 +2,12 @@
# Makefile for miscellaneous I2C chip drivers.
#
-obj-$(CONFIG_SENSORS_DS1337) += ds1337.o
-obj-$(CONFIG_SENSORS_DS1374) += ds1374.o
obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
-obj-$(CONFIG_SENSORS_M41T00) += m41t00.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
+obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
deleted file mode 100644
index ec17d6b..0000000
--- a/drivers/i2c/chips/ds1337.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * linux/drivers/i2c/chips/ds1337.c
- *
- * Copyright (C) 2005 James Chapman <jchapman@katalix.com>
- *
- * based on linux/drivers/acorn/char/pcf8583.c
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Driver for Dallas Semiconductor DS1337 and DS1339 real time clock chip
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/string.h>
-#include <linux/rtc.h> /* get the user-level API */
-#include <linux/bcd.h>
-#include <linux/list.h>
-
-/* Device registers */
-#define DS1337_REG_HOUR 2
-#define DS1337_REG_DAY 3
-#define DS1337_REG_DATE 4
-#define DS1337_REG_MONTH 5
-#define DS1337_REG_CONTROL 14
-#define DS1337_REG_STATUS 15
-
-/* FIXME - how do we export these interface constants? */
-#define DS1337_GET_DATE 0
-#define DS1337_SET_DATE 1
-
-/*
- * Functions declaration
- */
-static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD_1(ds1337);
-
-static int ds1337_attach_adapter(struct i2c_adapter *adapter);
-static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind);
-static void ds1337_init_client(struct i2c_client *client);
-static int ds1337_detach_client(struct i2c_client *client);
-static int ds1337_command(struct i2c_client *client, unsigned int cmd,
- void *arg);
-
-/*
- * Driver data (common to all clients)
- */
-static struct i2c_driver ds1337_driver = {
- .driver = {
- .name = "ds1337",
- },
- .attach_adapter = ds1337_attach_adapter,
- .detach_client = ds1337_detach_client,
- .command = ds1337_command,
-};
-
-/*
- * Client data (each client gets its own)
- */
-struct ds1337_data {
- struct i2c_client client;
- struct list_head list;
-};
-
-/*
- * Internal variables
- */
-static LIST_HEAD(ds1337_clients);
-
-static inline int ds1337_read(struct i2c_client *client, u8 reg, u8 *value)
-{
- s32 tmp = i2c_smbus_read_byte_data(client, reg);
-
- if (tmp < 0)
- return -EIO;
-
- *value = tmp;
-
- return 0;
-}
-
-/*
- * Chip access functions
- */
-static int ds1337_get_datetime(struct i2c_client *client, struct rtc_time *dt)
-{
- int result;
- u8 buf[7];
- u8 val;
- struct i2c_msg msg[2];
- u8 offs = 0;
-
- if (!dt) {
- dev_dbg(&client->dev, "%s: EINVAL: dt=NULL\n", __FUNCTION__);
- return -EINVAL;
- }
-
- msg[0].addr = client->addr;
- msg[0].flags = 0;
- msg[0].len = 1;
- msg[0].buf = &offs;
-
- msg[1].addr = client->addr;
- msg[1].flags = I2C_M_RD;
- msg[1].len = sizeof(buf);
- msg[1].buf = &buf[0];
-
- result = i2c_transfer(client->adapter, msg, 2);
-
- dev_dbg(&client->dev, "%s: [%d] %02x %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__, result, buf[0], buf[1], buf[2], buf[3],
- buf[4], buf[5], buf[6]);
-
- if (result == 2) {
- dt->tm_sec = BCD2BIN(buf[0]);
- dt->tm_min = BCD2BIN(buf[1]);
- val = buf[2] & 0x3f;
- dt->tm_hour = BCD2BIN(val);
- dt->tm_wday = BCD2BIN(buf[3]) - 1;
- dt->tm_mday = BCD2BIN(buf[4]);
- val = buf[5] & 0x7f;
- dt->tm_mon = BCD2BIN(val) - 1;
- dt->tm_year = BCD2BIN(buf[6]);
- if (buf[5] & 0x80)
- dt->tm_year += 100;
-
- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, "
- "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__, dt->tm_sec, dt->tm_min,
- dt->tm_hour, dt->tm_mday,
- dt->tm_mon, dt->tm_year, dt->tm_wday);
-
- return 0;
- }
-
- dev_err(&client->dev, "error reading data! %d\n", result);
- return -EIO;
-}
-
-static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
-{
- int result;
- u8 buf[8];
- u8 val;
- struct i2c_msg msg[1];
-
- if (!dt) {
- dev_dbg(&client->dev, "%s: EINVAL: dt=NULL\n", __FUNCTION__);
- return -EINVAL;
- }
-
- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
- "mday=%d, mon=%d, year=%d, wday=%d\n", __FUNCTION__,
- dt->tm_sec, dt->tm_min, dt->tm_hour,
- dt->tm_mday, dt->tm_mon, dt->tm_year, dt->tm_wday);
-
- buf[0] = 0; /* reg offset */
- buf[1] = BIN2BCD(dt->tm_sec);
- buf[2] = BIN2BCD(dt->tm_min);
- buf[3] = BIN2BCD(dt->tm_hour);
- buf[4] = BIN2BCD(dt->tm_wday + 1);
- buf[5] = BIN2BCD(dt->tm_mday);
- buf[6] = BIN2BCD(dt->tm_mon + 1);
- val = dt->tm_year;
- if (val >= 100) {
- val -= 100;
- buf[6] |= (1 << 7);
- }
- buf[7] = BIN2BCD(val);
-
- msg[0].addr = client->addr;
- msg[0].flags = 0;
- msg[0].len = sizeof(buf);
- msg[0].buf = &buf[0];
-
- result = i2c_transfer(client->adapter, msg, 1);
- if (result == 1)
- return 0;
-
- dev_err(&client->dev, "error writing data! %d\n", result);
- return -EIO;
-}
-
-static int ds1337_command(struct i2c_client *client, unsigned int cmd,
- void *arg)
-{
- dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
-
- switch (cmd) {
- case DS1337_GET_DATE:
- return ds1337_get_datetime(client, arg);
-
- case DS1337_SET_DATE:
- return ds1337_set_datetime(client, arg);
-
- default:
- return -EINVAL;
- }
-}
-
-/*
- * Public API for access to specific device. Useful for low-level
- * RTC access from kernel code.
- */
-int ds1337_do_command(int bus, int cmd, void *arg)
-{
- struct list_head *walk;
- struct list_head *tmp;
- struct ds1337_data *data;
-
- list_for_each_safe(walk, tmp, &ds1337_clients) {
- data = list_entry(walk, struct ds1337_data, list);
- if (data->client.adapter->nr == bus)
- return ds1337_command(&data->client, cmd, arg);
- }
-
- return -ENODEV;
-}
-
-static int ds1337_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, ds1337_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct ds1337_data *data;
- int err = 0;
- const char *name = "";
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_I2C))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
- INIT_LIST_HEAD(&data->list);
-
- /* The common I2C client data is placed right before the
- * DS1337-specific data.
- */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &ds1337_driver;
- new_client->flags = 0;
-
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- *
- * For detection, we read registers that are most likely to cause
- * detection failure, i.e. those that have more bits with fixed
- * or reserved values.
- */
-
- /* Default to an DS1337 if forced */
- if (kind == 0)
- kind = ds1337;
-
- if (kind < 0) { /* detection and identification */
- u8 data;
-
- /* Check that status register bits 6-2 are zero */
- if ((ds1337_read(new_client, DS1337_REG_STATUS, &data) < 0) ||
- (data & 0x7c))
- goto exit_free;
-
- /* Check for a valid day register value */
- if ((ds1337_read(new_client, DS1337_REG_DAY, &data) < 0) ||
- (data == 0) || (data & 0xf8))
- goto exit_free;
-
- /* Check for a valid date register value */
- if ((ds1337_read(new_client, DS1337_REG_DATE, &data) < 0) ||
- (data == 0) || (data & 0xc0) || ((data & 0x0f) > 9) ||
- (data >= 0x32))
- goto exit_free;
-
- /* Check for a valid month register value */
- if ((ds1337_read(new_client, DS1337_REG_MONTH, &data) < 0) ||
- (data == 0) || (data & 0x60) || ((data & 0x0f) > 9) ||
- ((data >= 0x13) && (data <= 0x19)))
- goto exit_free;
-
- /* Check that control register bits 6-5 are zero */
- if ((ds1337_read(new_client, DS1337_REG_CONTROL, &data) < 0) ||
- (data & 0x60))
- goto exit_free;
-
- kind = ds1337;
- }
-
- if (kind == ds1337)
- name = "ds1337";
-
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
- /* Initialize the DS1337 chip */
- ds1337_init_client(new_client);
-
- /* Add client to local list */
- list_add(&data->list, &ds1337_clients);
-
- return 0;
-
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static void ds1337_init_client(struct i2c_client *client)
-{
- u8 status, control;
-
- /* On some boards, the RTC isn't configured by boot firmware.
- * Handle that case by starting/configuring the RTC now.
- */
- status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
- control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
-
- if ((status & 0x80) || (control & 0x80)) {
- /* RTC not running */
- u8 buf[1+16]; /* First byte is interpreted as address */
- struct i2c_msg msg[1];
-
- dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__);
-
- /* Initialize all, including STATUS and CONTROL to zero */
- memset(buf, 0, sizeof(buf));
-
- /* Write valid values in the date/time registers */
- buf[1+DS1337_REG_DAY] = 1;
- buf[1+DS1337_REG_DATE] = 1;
- buf[1+DS1337_REG_MONTH] = 1;
-
- msg[0].addr = client->addr;
- msg[0].flags = 0;
- msg[0].len = sizeof(buf);
- msg[0].buf = &buf[0];
-
- i2c_transfer(client->adapter, msg, 1);
- } else {
- /* Running: ensure that device is set in 24-hour mode */
- s32 val;
-
- val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
- if ((val >= 0) && (val & (1 << 6)))
- i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
- val & 0x3f);
- }
-}
-
-static int ds1337_detach_client(struct i2c_client *client)
-{
- int err;
- struct ds1337_data *data = i2c_get_clientdata(client);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- list_del(&data->list);
- kfree(data);
- return 0;
-}
-
-static int __init ds1337_init(void)
-{
- return i2c_add_driver(&ds1337_driver);
-}
-
-static void __exit ds1337_exit(void)
-{
- i2c_del_driver(&ds1337_driver);
-}
-
-MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
-MODULE_DESCRIPTION("DS1337 RTC driver");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL_GPL(ds1337_do_command);
-
-module_init(ds1337_init);
-module_exit(ds1337_exit);
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
deleted file mode 100644
index 8a2ff0c..0000000
--- a/drivers/i2c/chips/ds1374.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * drivers/i2c/chips/ds1374.c
- *
- * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock
- *
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * Based on the m41t00.c by Mark Greer <mgreer@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-/*
- * This i2c client/driver wedges between the drivers/char/genrtc.c RTC
- * interface and the SMBus interface of the i2c subsystem.
- * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
- * recommened in .../Documentation/i2c/writing-clients section
- * "Sending and receiving", using SMBus level communication is preferred.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/mutex.h>
-#include <linux/workqueue.h>
-
-#define DS1374_REG_TOD0 0x00
-#define DS1374_REG_TOD1 0x01
-#define DS1374_REG_TOD2 0x02
-#define DS1374_REG_TOD3 0x03
-#define DS1374_REG_WDALM0 0x04
-#define DS1374_REG_WDALM1 0x05
-#define DS1374_REG_WDALM2 0x06
-#define DS1374_REG_CR 0x07
-#define DS1374_REG_SR 0x08
-#define DS1374_REG_SR_OSF 0x80
-#define DS1374_REG_TCR 0x09
-
-#define DS1374_DRV_NAME "ds1374"
-
-static DEFINE_MUTEX(ds1374_mutex);
-
-static struct i2c_driver ds1374_driver;
-static struct i2c_client *save_client;
-
-static unsigned short ignore[] = { I2C_CLIENT_END };
-static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
-
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
-};
-
-static ulong ds1374_read_rtc(void)
-{
- ulong time = 0;
- int reg = DS1374_REG_WDALM0;
-
- while (reg--) {
- s32 tmp;
- if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) {
- dev_warn(&save_client->dev,
- "can't read from rtc chip\n");
- return 0;
- }
- time = (time << 8) | (tmp & 0xff);
- }
- return time;
-}
-
-static void ds1374_write_rtc(ulong time)
-{
- int reg;
-
- for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) {
- if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff)
- < 0) {
- dev_warn(&save_client->dev,
- "can't write to rtc chip\n");
- break;
- }
- time = time >> 8;
- }
-}
-
-static void ds1374_check_rtc_status(void)
-{
- s32 tmp;
-
- tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR);
- if (tmp < 0) {
- dev_warn(&save_client->dev,
- "can't read status from rtc chip\n");
- return;
- }
- if (tmp & DS1374_REG_SR_OSF) {
- dev_warn(&save_client->dev,
- "oscillator discontinuity flagged, time unreliable\n");
- tmp &= ~DS1374_REG_SR_OSF;
- tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR,
- tmp & 0xff);
- if (tmp < 0)
- dev_warn(&save_client->dev,
- "can't clear discontinuity notification\n");
- }
-}
-
-ulong ds1374_get_rtc_time(void)
-{
- ulong t1, t2;
- int limit = 10; /* arbitrary retry limit */
-
- mutex_lock(&ds1374_mutex);
-
- /*
- * Since the reads are being performed one byte at a time using
- * the SMBus vs a 4-byte i2c transfer, there is a chance that a
- * carry will occur during the read. To detect this, 2 reads are
- * performed and compared.
- */
- do {
- t1 = ds1374_read_rtc();
- t2 = ds1374_read_rtc();
- } while (t1 != t2 && limit--);
-
- mutex_unlock(&ds1374_mutex);
-
- if (t1 != t2) {
- dev_warn(&save_client->dev,
- "can't get consistent time from rtc chip\n");
- t1 = 0;
- }
-
- return t1;
-}
-
-static ulong new_time;
-
-static void ds1374_set_work(struct work_struct *work)
-{
- ulong t1, t2;
- int limit = 10; /* arbitrary retry limit */
-
- t1 = new_time;
-
- mutex_lock(&ds1374_mutex);
-
- /*
- * Since the writes are being performed one byte at a time using
- * the SMBus vs a 4-byte i2c transfer, there is a chance that a
- * carry will occur during the write. To detect this, the write
- * value is read back and compared.
- */
- do {
- ds1374_write_rtc(t1);
- t2 = ds1374_read_rtc();
- } while (t1 != t2 && limit--);
-
- mutex_unlock(&ds1374_mutex);
-
- if (t1 != t2)
- dev_warn(&save_client->dev,
- "can't confirm time set from rtc chip\n");
-}
-
-static struct workqueue_struct *ds1374_workqueue;
-
-static DECLARE_WORK(ds1374_work, ds1374_set_work);
-
-int ds1374_set_rtc_time(ulong nowtime)
-{
- new_time = nowtime;
-
- if (in_interrupt())
- queue_work(ds1374_workqueue, &ds1374_work);
- else
- ds1374_set_work(NULL);
-
- return 0;
-}
-
-/*
- *****************************************************************************
- *
- * Driver Interface
- *
- *****************************************************************************
- */
-static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
-{
- struct i2c_client *client;
- int rc;
-
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client)
- return -ENOMEM;
-
- strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
- client->addr = addr;
- client->adapter = adap;
- client->driver = &ds1374_driver;
-
- ds1374_workqueue = create_singlethread_workqueue("ds1374");
- if (!ds1374_workqueue) {
- kfree(client);
- return -ENOMEM; /* most expected reason */
- }
-
- if ((rc = i2c_attach_client(client)) != 0) {
- kfree(client);
- return rc;
- }
-
- save_client = client;
-
- ds1374_check_rtc_status();
-
- return 0;
-}
-
-static int ds1374_attach(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, ds1374_probe);
-}
-
-static int ds1374_detach(struct i2c_client *client)
-{
- int rc;
-
- if ((rc = i2c_detach_client(client)) == 0) {
- kfree(i2c_get_clientdata(client));
- destroy_workqueue(ds1374_workqueue);
- }
- return rc;
-}
-
-static struct i2c_driver ds1374_driver = {
- .driver = {
- .name = DS1374_DRV_NAME,
- },
- .id = I2C_DRIVERID_DS1374,
- .attach_adapter = ds1374_attach,
- .detach_client = ds1374_detach,
-};
-
-static int __init ds1374_init(void)
-{
- return i2c_add_driver(&ds1374_driver);
-}
-
-static void __exit ds1374_exit(void)
-{
- i2c_del_driver(&ds1374_driver);
-}
-
-module_init(ds1374_init);
-module_exit(ds1374_exit);
-
-MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>");
-MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 1a7eeeb..fde297b2 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -35,7 +35,7 @@
#include <linux/mutex.h>
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
0x55, 0x56, 0x57, I2C_CLIENT_END };
/* Insmod parameters */
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index ebfbb29..2a31601 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -100,7 +100,7 @@
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
-#include <asm/arch/tps65010.h>
+#include <linux/i2c/tps65010.h>
#else
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
deleted file mode 100644
index 3fcb646..0000000
--- a/drivers/i2c/chips/m41t00.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * I2C client/driver for the ST M41T00 family of i2c rtc chips.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2005, 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-/*
- * This i2c client/driver wedges between the drivers/char/genrtc.c RTC
- * interface and the SMBus interface of the i2c subsystem.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/m41t00.h>
-#include <asm/time.h>
-#include <asm/rtc.h>
-
-static struct i2c_driver m41t00_driver;
-static struct i2c_client *save_client;
-
-static unsigned short ignore[] = { I2C_CLIENT_END };
-static unsigned short normal_addr[] = { I2C_CLIENT_END, I2C_CLIENT_END };
-
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
-};
-
-struct m41t00_chip_info {
- u8 type;
- char *name;
- u8 read_limit;
- u8 sec; /* Offsets for chip regs */
- u8 min;
- u8 hour;
- u8 day;
- u8 mon;
- u8 year;
- u8 alarm_mon;
- u8 alarm_hour;
- u8 sqw;
- u8 sqw_freq;
-};
-
-static struct m41t00_chip_info m41t00_chip_info_tbl[] = {
- {
- .type = M41T00_TYPE_M41T00,
- .name = "m41t00",
- .read_limit = 5,
- .sec = 0,
- .min = 1,
- .hour = 2,
- .day = 4,
- .mon = 5,
- .year = 6,
- },
- {
- .type = M41T00_TYPE_M41T81,
- .name = "m41t81",
- .read_limit = 1,
- .sec = 1,
- .min = 2,
- .hour = 3,
- .day = 5,
- .mon = 6,
- .year = 7,
- .alarm_mon = 0xa,
- .alarm_hour = 0xc,
- .sqw = 0x13,
- },
- {
- .type = M41T00_TYPE_M41T85,
- .name = "m41t85",
- .read_limit = 1,
- .sec = 1,
- .min = 2,
- .hour = 3,
- .day = 5,
- .mon = 6,
- .year = 7,
- .alarm_mon = 0xa,
- .alarm_hour = 0xc,
- .sqw = 0x13,
- },
-};
-static struct m41t00_chip_info *m41t00_chip;
-
-ulong
-m41t00_get_rtc_time(void)
-{
- s32 sec, min, hour, day, mon, year;
- s32 sec1, min1, hour1, day1, mon1, year1;
- u8 reads = 0;
- u8 buf[8], msgbuf[1] = { 0 }; /* offset into rtc's regs */
- struct i2c_msg msgs[] = {
- {
- .addr = save_client->addr,
- .flags = 0,
- .len = 1,
- .buf = msgbuf,
- },
- {
- .addr = save_client->addr,
- .flags = I2C_M_RD,
- .len = 8,
- .buf = buf,
- },
- };
-
- sec = min = hour = day = mon = year = 0;
-
- do {
- if (i2c_transfer(save_client->adapter, msgs, 2) < 0)
- goto read_err;
-
- sec1 = sec;
- min1 = min;
- hour1 = hour;
- day1 = day;
- mon1 = mon;
- year1 = year;
-
- sec = buf[m41t00_chip->sec] & 0x7f;
- min = buf[m41t00_chip->min] & 0x7f;
- hour = buf[m41t00_chip->hour] & 0x3f;
- day = buf[m41t00_chip->day] & 0x3f;
- mon = buf[m41t00_chip->mon] & 0x1f;
- year = buf[m41t00_chip->year];
- } while ((++reads < m41t00_chip->read_limit) && ((sec != sec1)
- || (min != min1) || (hour != hour1) || (day != day1)
- || (mon != mon1) || (year != year1)));
-
- if ((m41t00_chip->read_limit > 1) && ((sec != sec1) || (min != min1)
- || (hour != hour1) || (day != day1) || (mon != mon1)
- || (year != year1)))
- goto read_err;
-
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
- day = BCD2BIN(day);
- mon = BCD2BIN(mon);
- year = BCD2BIN(year);
-
- year += 1900;
- if (year < 1970)
- year += 100;
-
- return mktime(year, mon, day, hour, min, sec);
-
-read_err:
- dev_err(&save_client->dev, "m41t00_get_rtc_time: Read error\n");
- return 0;
-}
-EXPORT_SYMBOL_GPL(m41t00_get_rtc_time);
-
-static void
-m41t00_set(void *arg)
-{
- struct rtc_time tm;
- int nowtime = *(int *)arg;
- s32 sec, min, hour, day, mon, year;
- u8 wbuf[9], *buf = &wbuf[1], msgbuf[1] = { 0 };
- struct i2c_msg msgs[] = {
- {
- .addr = save_client->addr,
- .flags = 0,
- .len = 1,
- .buf = msgbuf,
- },
- {
- .addr = save_client->addr,
- .flags = I2C_M_RD,
- .len = 8,
- .buf = buf,
- },
- };
-
- to_tm(nowtime, &tm);
- tm.tm_year = (tm.tm_year - 1900) % 100;
-
- sec = BIN2BCD(tm.tm_sec);
- min = BIN2BCD(tm.tm_min);
- hour = BIN2BCD(tm.tm_hour);
- day = BIN2BCD(tm.tm_mday);
- mon = BIN2BCD(tm.tm_mon);
- year = BIN2BCD(tm.tm_year);
-
- /* Read reg values into buf[0..7]/wbuf[1..8] */
- if (i2c_transfer(save_client->adapter, msgs, 2) < 0) {
- dev_err(&save_client->dev, "m41t00_set: Read error\n");
- return;
- }
-
- wbuf[0] = 0; /* offset into rtc's regs */
- buf[m41t00_chip->sec] = (buf[m41t00_chip->sec] & ~0x7f) | (sec & 0x7f);
- buf[m41t00_chip->min] = (buf[m41t00_chip->min] & ~0x7f) | (min & 0x7f);
- buf[m41t00_chip->hour] = (buf[m41t00_chip->hour] & ~0x3f) | (hour& 0x3f);
- buf[m41t00_chip->day] = (buf[m41t00_chip->day] & ~0x3f) | (day & 0x3f);
- buf[m41t00_chip->mon] = (buf[m41t00_chip->mon] & ~0x1f) | (mon & 0x1f);
- buf[m41t00_chip->year] = year;
-
- if (i2c_master_send(save_client, wbuf, 9) < 0)
- dev_err(&save_client->dev, "m41t00_set: Write error\n");
-}
-
-static ulong new_time;
-/* well, isn't this API just _lovely_? */
-static void
-m41t00_barf(struct work_struct *unusable)
-{
- m41t00_set(&new_time);
-}
-
-static struct workqueue_struct *m41t00_wq;
-static DECLARE_WORK(m41t00_work, m41t00_barf);
-
-int
-m41t00_set_rtc_time(ulong nowtime)
-{
- new_time = nowtime;
-
- if (in_interrupt())
- queue_work(m41t00_wq, &m41t00_work);
- else
- m41t00_set(&new_time);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(m41t00_set_rtc_time);
-
-/*
- *****************************************************************************
- *
- * platform_data Driver Interface
- *
- *****************************************************************************
- */
-static int __init
-m41t00_platform_probe(struct platform_device *pdev)
-{
- struct m41t00_platform_data *pdata;
- int i;
-
- if (pdev && (pdata = pdev->dev.platform_data)) {
- normal_addr[0] = pdata->i2c_addr;
-
- for (i=0; i<ARRAY_SIZE(m41t00_chip_info_tbl); i++)
- if (m41t00_chip_info_tbl[i].type == pdata->type) {
- m41t00_chip = &m41t00_chip_info_tbl[i];
- m41t00_chip->sqw_freq = pdata->sqw_freq;
- return 0;
- }
- }
- return -ENODEV;
-}
-
-static int __exit
-m41t00_platform_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static struct platform_driver m41t00_platform_driver = {
- .probe = m41t00_platform_probe,
- .remove = m41t00_platform_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = M41T00_DRV_NAME,
- },
-};
-
-/*
- *****************************************************************************
- *
- * Driver Interface
- *
- *****************************************************************************
- */
-static int
-m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
-{
- struct i2c_client *client;
- int rc;
-
- if (!i2c_check_functionality(adap, I2C_FUNC_I2C
- | I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client)
- return -ENOMEM;
-
- strlcpy(client->name, m41t00_chip->name, I2C_NAME_SIZE);
- client->addr = addr;
- client->adapter = adap;
- client->driver = &m41t00_driver;
-
- if ((rc = i2c_attach_client(client)))
- goto attach_err;
-
- if (m41t00_chip->type != M41T00_TYPE_M41T00) {
- /* If asked, disable SQW, set SQW frequency & re-enable */
- if (m41t00_chip->sqw_freq)
- if (((rc = i2c_smbus_read_byte_data(client,
- m41t00_chip->alarm_mon)) < 0)
- || ((rc = i2c_smbus_write_byte_data(client,
- m41t00_chip->alarm_mon, rc & ~0x40)) <0)
- || ((rc = i2c_smbus_write_byte_data(client,
- m41t00_chip->sqw,
- m41t00_chip->sqw_freq)) < 0)
- || ((rc = i2c_smbus_write_byte_data(client,
- m41t00_chip->alarm_mon, rc | 0x40)) <0))
- goto sqw_err;
-
- /* Make sure HT (Halt Update) bit is cleared */
- if ((rc = i2c_smbus_read_byte_data(client,
- m41t00_chip->alarm_hour)) < 0)
- goto ht_err;
-
- if (rc & 0x40)
- if ((rc = i2c_smbus_write_byte_data(client,
- m41t00_chip->alarm_hour, rc & ~0x40))<0)
- goto ht_err;
- }
-
- /* Make sure ST (stop) bit is cleared */
- if ((rc = i2c_smbus_read_byte_data(client, m41t00_chip->sec)) < 0)
- goto st_err;
-
- if (rc & 0x80)
- if ((rc = i2c_smbus_write_byte_data(client, m41t00_chip->sec,
- rc & ~0x80)) < 0)
- goto st_err;
-
- m41t00_wq = create_singlethread_workqueue(m41t00_chip->name);
- save_client = client;
- return 0;
-
-st_err:
- dev_err(&client->dev, "m41t00_probe: Can't clear ST bit\n");
- goto attach_err;
-ht_err:
- dev_err(&client->dev, "m41t00_probe: Can't clear HT bit\n");
- goto attach_err;
-sqw_err:
- dev_err(&client->dev, "m41t00_probe: Can't set SQW Frequency\n");
-attach_err:
- kfree(client);
- return rc;
-}
-
-static int
-m41t00_attach(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, m41t00_probe);
-}
-
-static int
-m41t00_detach(struct i2c_client *client)
-{
- int rc;
-
- if ((rc = i2c_detach_client(client)) == 0) {
- kfree(client);
- destroy_workqueue(m41t00_wq);
- }
- return rc;
-}
-
-static struct i2c_driver m41t00_driver = {
- .driver = {
- .name = M41T00_DRV_NAME,
- },
- .id = I2C_DRIVERID_STM41T00,
- .attach_adapter = m41t00_attach,
- .detach_client = m41t00_detach,
-};
-
-static int __init
-m41t00_init(void)
-{
- int rc;
-
- if (!(rc = platform_driver_register(&m41t00_platform_driver)))
- rc = i2c_add_driver(&m41t00_driver);
- return rc;
-}
-
-static void __exit
-m41t00_exit(void)
-{
- i2c_del_driver(&m41t00_driver);
- platform_driver_unregister(&m41t00_platform_driver);
-}
-
-module_init(m41t00_init);
-module_exit(m41t00_exit);
-
-MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
-MODULE_DESCRIPTION("ST Microelectronics M41T00 RTC I2C Client Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 64692f6..fb7ea56 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -34,7 +34,7 @@
#include <linux/mutex.h>
/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
-static unsigned short normal_i2c[] = {I2C_CLIENT_END};
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(max6875);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 21c6dd6..b3b830c 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -41,9 +41,11 @@
#include <linux/i2c.h>
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
- 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
- I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = {
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ I2C_CLIENT_END
+};
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c
new file mode 100644
index 0000000..3ea08ac
--- /dev/null
+++ b/drivers/i2c/chips/pcf8575.c
@@ -0,0 +1,214 @@
+/*
+ pcf8575.c
+
+ About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus
+ produced by a.o. Philips Semiconductors.
+
+ Copyright (C) 2006 Michael Hennerich, Analog Devices Inc.
+ <hennerich@blackfin.uclinux.org>
+ Based on pcf8574.c.
+
+ Copyright (c) 2007 Bart Van Assche <bart.vanassche@gmail.com>.
+ Ported this driver from ucLinux to the mainstream Linux kernel.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h> /* kzalloc() */
+#include <linux/sysfs.h> /* sysfs_create_group() */
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ I2C_CLIENT_END
+};
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD;
+
+
+/* Each client has this additional data */
+struct pcf8575_data {
+ struct i2c_client client;
+ int write; /* last written value, or error code */
+};
+
+static int pcf8575_attach_adapter(struct i2c_adapter *adapter);
+static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pcf8575_detach_client(struct i2c_client *client);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pcf8575_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pcf8575",
+ },
+ .attach_adapter = pcf8575_attach_adapter,
+ .detach_client = pcf8575_detach_client,
+};
+
+/* following are the sysfs callback functions */
+static ssize_t show_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ u16 val;
+ u8 iopin_state[2];
+
+ i2c_master_recv(client, iopin_state, 2);
+
+ val = iopin_state[0];
+ val |= iopin_state[1] << 8;
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
+
+static ssize_t show_write(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pcf8575_data *data = dev_get_drvdata(dev);
+ if (data->write < 0)
+ return data->write;
+ return sprintf(buf, "%d\n", data->write);
+}
+
+static ssize_t set_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pcf8575_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ u8 iopin_state[2];
+
+ if (val > 0xffff)
+ return -EINVAL;
+
+ data->write = val;
+
+ iopin_state[0] = val & 0xFF;
+ iopin_state[1] = val >> 8;
+
+ i2c_master_send(client, iopin_state, 2);
+
+ return count;
+}
+
+static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
+
+static struct attribute *pcf8575_attributes[] = {
+ &dev_attr_read.attr,
+ &dev_attr_write.attr,
+ NULL
+};
+
+static const struct attribute_group pcf8575_attr_group = {
+ .attrs = pcf8575_attributes,
+};
+
+/*
+ * Real code
+ */
+
+static int pcf8575_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, pcf8575_detect);
+}
+
+/* This function is called by i2c_probe */
+static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct pcf8575_data *data;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet. */
+ data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &pcf8575_driver;
+ strlcpy(client->name, "pcf8575", I2C_NAME_SIZE);
+ data->write = -EAGAIN;
+
+ /* This is the place to detect whether the chip at the specified
+ address really is a PCF8575 chip. However, there is no method known
+ to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
+
+ /* Tell the I2C layer a new client has arrived */
+ err = i2c_attach_client(client);
+ if (err)
+ goto exit_free;
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group);
+ if (err)
+ goto exit_detach;
+
+ return 0;
+
+exit_detach:
+ i2c_detach_client(client);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int pcf8575_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group);
+
+ err = i2c_detach_client(client);
+ if (err)
+ return err;
+
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+static int __init pcf8575_init(void)
+{
+ return i2c_add_driver(&pcf8575_driver);
+}
+
+static void __exit pcf8575_exit(void)
+{
+ i2c_del_driver(&pcf8575_driver);
+}
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>, "
+ "Bart Van Assche <bart.vanassche@gmail.com>");
+MODULE_DESCRIPTION("pcf8575 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pcf8575_init);
+module_exit(pcf8575_exit);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 4dc3637..865f440 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -27,7 +27,7 @@
#include <linux/mutex.h>
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Insmod parameters */
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index e320994..4154a91 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -31,7 +31,7 @@
#include <linux/seq_file.h>
#include <linux/mutex.h>
-#include <asm/arch/tps65010.h>
+#include <linux/i2c/tps65010.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index 3de4b19..a10fd27 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -432,11 +432,32 @@
return 0;
}
+#ifdef CONFIG_PM
+
+static int tsl2550_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ return tsl2550_set_power_state(client, 0);
+}
+
+static int tsl2550_resume(struct i2c_client *client)
+{
+ return tsl2550_set_power_state(client, 1);
+}
+
+#else
+
+#define tsl2550_suspend NULL
+#define tsl2550_resume NULL
+
+#endif /* CONFIG_PM */
+
static struct i2c_driver tsl2550_driver = {
.driver = {
.name = TSL2550_DRV_NAME,
.owner = THIS_MODULE,
},
+ .suspend = tsl2550_suspend,
+ .resume = tsl2550_resume,
.probe = tsl2550_probe,
.remove = __devexit_p(tsl2550_remove),
};
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index b5e13e4..96da22e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -33,14 +33,15 @@
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/completion.h>
+#include <linux/hardirq.h>
+#include <linux/irqflags.h>
#include <asm/uaccess.h>
+#include <asm/semaphore.h>
#include "i2c-core.h"
-static LIST_HEAD(adapters);
-static LIST_HEAD(drivers);
-static DEFINE_MUTEX(core_lists);
+static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
#define is_newstyle_driver(d) ((d)->probe || (d)->remove)
@@ -198,6 +199,25 @@
.resume = i2c_device_resume,
};
+
+/**
+ * i2c_verify_client - return parameter as i2c_client, or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find. Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_client.
+ */
+struct i2c_client *i2c_verify_client(struct device *dev)
+{
+ return (dev->bus == &i2c_bus_type)
+ ? to_i2c_client(dev)
+ : NULL;
+}
+EXPORT_SYMBOL(i2c_verify_client);
+
+
/**
* i2c_new_device - instantiate an i2c device for use with a new style driver
* @adap: the adapter managing the device
@@ -276,6 +296,50 @@
EXPORT_SYMBOL_GPL(i2c_unregister_device);
+static int dummy_nop(struct i2c_client *client)
+{
+ return 0;
+}
+
+static struct i2c_driver dummy_driver = {
+ .driver.name = "dummy",
+ .probe = dummy_nop,
+ .remove = dummy_nop,
+};
+
+/**
+ * i2c_new_dummy - return a new i2c device bound to a dummy driver
+ * @adapter: the adapter managing the device
+ * @address: seven bit address to be used
+ * @type: optional label used for i2c_client.name
+ * Context: can sleep
+ *
+ * This returns an I2C client bound to the "dummy" driver, intended for use
+ * with devices that consume multiple addresses. Examples of such chips
+ * include various EEPROMS (like 24c04 and 24c08 models).
+ *
+ * These dummy devices have two main uses. First, most I2C and SMBus calls
+ * except i2c_transfer() need a client handle; the dummy will be that handle.
+ * And second, this prevents the specified address from being bound to a
+ * different driver.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *
+i2c_new_dummy(struct i2c_adapter *adapter, u16 address, const char *type)
+{
+ struct i2c_board_info info = {
+ .driver_name = "dummy",
+ .addr = address,
+ };
+
+ if (type)
+ strlcpy(info.type, type, sizeof info.type);
+ return i2c_new_device(adapter, &info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_dummy);
+
/* ------------------------------------------------------------------------- */
/* I2C bus adapters -- one roots each I2C or SMBUS segment */
@@ -320,18 +384,27 @@
mutex_unlock(&__i2c_board_lock);
}
+static int i2c_do_add_adapter(struct device_driver *d, void *data)
+{
+ struct i2c_driver *driver = to_i2c_driver(d);
+ struct i2c_adapter *adap = data;
+
+ if (driver->attach_adapter) {
+ /* We ignore the return code; if it fails, too bad */
+ driver->attach_adapter(adap);
+ }
+ return 0;
+}
+
static int i2c_register_adapter(struct i2c_adapter *adap)
{
- int res = 0;
- struct list_head *item;
- struct i2c_driver *driver;
+ int res = 0, dummy;
mutex_init(&adap->bus_lock);
mutex_init(&adap->clist_lock);
INIT_LIST_HEAD(&adap->clients);
- mutex_lock(&core_lists);
- list_add_tail(&adap->list, &adapters);
+ mutex_lock(&core_lock);
/* Add the adapter to the driver core.
* If the parent pointer is not set up,
@@ -356,19 +429,14 @@
i2c_scan_static_board_info(adap);
/* let legacy drivers scan this bus for matching devices */
- list_for_each(item,&drivers) {
- driver = list_entry(item, struct i2c_driver, list);
- if (driver->attach_adapter)
- /* We ignore the return code; if it fails, too bad */
- driver->attach_adapter(adap);
- }
+ dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
+ i2c_do_add_adapter);
out_unlock:
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
return res;
out_list:
- list_del(&adap->list);
idr_remove(&i2c_adapter_idr, adap->nr);
goto out_unlock;
}
@@ -394,11 +462,11 @@
if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0)
return -ENOMEM;
- mutex_lock(&core_lists);
+ mutex_lock(&core_lock);
/* "above" here means "above or equal to", sigh */
res = idr_get_new_above(&i2c_adapter_idr, adapter,
__i2c_first_dynamic_bus_num, &id);
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
if (res < 0) {
if (res == -EAGAIN)
@@ -443,7 +511,7 @@
if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0)
return -ENOMEM;
- mutex_lock(&core_lists);
+ mutex_lock(&core_lock);
/* "above" here means "above or equal to", sigh;
* we need the "equal to" result to force the result
*/
@@ -452,7 +520,7 @@
status = -EBUSY;
idr_remove(&i2c_adapter_idr, id);
}
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
if (status == -EAGAIN)
goto retry;
@@ -462,6 +530,21 @@
}
EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
+static int i2c_do_del_adapter(struct device_driver *d, void *data)
+{
+ struct i2c_driver *driver = to_i2c_driver(d);
+ struct i2c_adapter *adapter = data;
+ int res;
+
+ if (!driver->detach_adapter)
+ return 0;
+ res = driver->detach_adapter(adapter);
+ if (res)
+ dev_err(&adapter->dev, "detach_adapter failed (%d) "
+ "for driver [%s]\n", res, driver->driver.name);
+ return res;
+}
+
/**
* i2c_del_adapter - unregister I2C adapter
* @adap: the adapter being unregistered
@@ -473,35 +556,24 @@
int i2c_del_adapter(struct i2c_adapter *adap)
{
struct list_head *item, *_n;
- struct i2c_adapter *adap_from_list;
- struct i2c_driver *driver;
struct i2c_client *client;
int res = 0;
- mutex_lock(&core_lists);
+ mutex_lock(&core_lock);
/* First make sure that this adapter was ever added */
- list_for_each_entry(adap_from_list, &adapters, list) {
- if (adap_from_list == adap)
- break;
- }
- if (adap_from_list != adap) {
+ if (idr_find(&i2c_adapter_idr, adap->nr) != adap) {
pr_debug("i2c-core: attempting to delete unregistered "
"adapter [%s]\n", adap->name);
res = -EINVAL;
goto out_unlock;
}
- list_for_each(item,&drivers) {
- driver = list_entry(item, struct i2c_driver, list);
- if (driver->detach_adapter)
- if ((res = driver->detach_adapter(adap))) {
- dev_err(&adap->dev, "detach_adapter failed "
- "for driver [%s]\n",
- driver->driver.name);
- goto out_unlock;
- }
- }
+ /* Tell drivers about this removal */
+ res = bus_for_each_drv(&i2c_bus_type, NULL, adap,
+ i2c_do_del_adapter);
+ if (res)
+ goto out_unlock;
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
@@ -529,7 +601,6 @@
/* clean up the sysfs representation */
init_completion(&adap->dev_released);
device_unregister(&adap->dev);
- list_del(&adap->list);
/* wait for sysfs to drop all references */
wait_for_completion(&adap->dev_released);
@@ -540,7 +611,7 @@
dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
out_unlock:
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
return res;
}
EXPORT_SYMBOL(i2c_del_adapter);
@@ -583,21 +654,23 @@
if (res)
return res;
- mutex_lock(&core_lists);
+ mutex_lock(&core_lock);
- list_add_tail(&driver->list,&drivers);
pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
/* legacy drivers scan i2c busses directly */
if (driver->attach_adapter) {
struct i2c_adapter *adapter;
- list_for_each_entry(adapter, &adapters, list) {
+ down(&i2c_adapter_class.sem);
+ list_for_each_entry(adapter, &i2c_adapter_class.devices,
+ dev.node) {
driver->attach_adapter(adapter);
}
+ up(&i2c_adapter_class.sem);
}
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
return 0;
}
EXPORT_SYMBOL(i2c_register_driver);
@@ -609,11 +682,11 @@
*/
void i2c_del_driver(struct i2c_driver *driver)
{
- struct list_head *item1, *item2, *_n;
+ struct list_head *item2, *_n;
struct i2c_client *client;
struct i2c_adapter *adap;
- mutex_lock(&core_lists);
+ mutex_lock(&core_lock);
/* new-style driver? */
if (is_newstyle_driver(driver))
@@ -623,8 +696,8 @@
* attached. If so, detach them to be able to kill the driver
* afterwards.
*/
- list_for_each(item1,&adapters) {
- adap = list_entry(item1, struct i2c_adapter, list);
+ down(&i2c_adapter_class.sem);
+ list_for_each_entry(adap, &i2c_adapter_class.devices, dev.node) {
if (driver->detach_adapter) {
if (driver->detach_adapter(adap)) {
dev_err(&adap->dev, "detach_adapter failed "
@@ -648,40 +721,31 @@
}
}
}
+ up(&i2c_adapter_class.sem);
unregister:
driver_unregister(&driver->driver);
- list_del(&driver->list);
pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
}
EXPORT_SYMBOL(i2c_del_driver);
/* ------------------------------------------------------------------------- */
-static int __i2c_check_addr(struct i2c_adapter *adapter, unsigned int addr)
+static int __i2c_check_addr(struct device *dev, void *addrp)
{
- struct list_head *item;
- struct i2c_client *client;
+ struct i2c_client *client = i2c_verify_client(dev);
+ int addr = *(int *)addrp;
- list_for_each(item,&adapter->clients) {
- client = list_entry(item, struct i2c_client, list);
- if (client->addr == addr)
- return -EBUSY;
- }
+ if (client && client->addr == addr)
+ return -EBUSY;
return 0;
}
static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
{
- int rval;
-
- mutex_lock(&adapter->clist_lock);
- rval = __i2c_check_addr(adapter, addr);
- mutex_unlock(&adapter->clist_lock);
-
- return rval;
+ return device_for_each_child(&adapter->dev, &addr, __i2c_check_addr);
}
int i2c_attach_client(struct i2c_client *client)
@@ -689,15 +753,6 @@
struct i2c_adapter *adapter = client->adapter;
int res = 0;
- mutex_lock(&adapter->clist_lock);
- if (__i2c_check_addr(client->adapter, client->addr)) {
- res = -EBUSY;
- goto out_unlock;
- }
- list_add_tail(&client->list,&adapter->clients);
-
- client->usage_count = 0;
-
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
@@ -712,13 +767,17 @@
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
- dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
- client->name, client->dev.bus_id);
res = device_register(&client->dev);
if (res)
- goto out_list;
+ goto out_err;
+
+ mutex_lock(&adapter->clist_lock);
+ list_add_tail(&client->list, &adapter->clients);
mutex_unlock(&adapter->clist_lock);
+ dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
+ client->name, client->dev.bus_id);
+
if (adapter->client_register) {
if (adapter->client_register(client)) {
dev_dbg(&adapter->dev, "client_register "
@@ -729,12 +788,9 @@
return 0;
-out_list:
- list_del(&client->list);
+out_err:
dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x "
"(%d)\n", client->name, client->addr, res);
-out_unlock:
- mutex_unlock(&adapter->clist_lock);
return res;
}
EXPORT_SYMBOL(i2c_attach_client);
@@ -744,12 +800,6 @@
struct i2c_adapter *adapter = client->adapter;
int res = 0;
- if (client->usage_count > 0) {
- dev_warn(&client->dev, "Client [%s] still busy, "
- "can't detach\n", client->name);
- return -EBUSY;
- }
-
if (adapter->client_unregister) {
res = adapter->client_unregister(client);
if (res) {
@@ -762,9 +812,10 @@
mutex_lock(&adapter->clist_lock);
list_del(&client->list);
+ mutex_unlock(&adapter->clist_lock);
+
init_completion(&client->released);
device_unregister(&client->dev);
- mutex_unlock(&adapter->clist_lock);
wait_for_completion(&client->released);
out:
@@ -772,72 +823,58 @@
}
EXPORT_SYMBOL(i2c_detach_client);
-static int i2c_inc_use_client(struct i2c_client *client)
+/**
+ * i2c_use_client - increments the reference count of the i2c client structure
+ * @client: the client being referenced
+ *
+ * Each live reference to a client should be refcounted. The driver model does
+ * that automatically as part of driver binding, so that most drivers don't
+ * need to do this explicitly: they hold a reference until they're unbound
+ * from the device.
+ *
+ * A pointer to the client with the incremented reference counter is returned.
+ */
+struct i2c_client *i2c_use_client(struct i2c_client *client)
{
-
- if (!try_module_get(client->driver->driver.owner))
- return -ENODEV;
- if (!try_module_get(client->adapter->owner)) {
- module_put(client->driver->driver.owner);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static void i2c_dec_use_client(struct i2c_client *client)
-{
- module_put(client->driver->driver.owner);
- module_put(client->adapter->owner);
-}
-
-int i2c_use_client(struct i2c_client *client)
-{
- int ret;
-
- ret = i2c_inc_use_client(client);
- if (ret)
- return ret;
-
- client->usage_count++;
-
- return 0;
+ get_device(&client->dev);
+ return client;
}
EXPORT_SYMBOL(i2c_use_client);
-int i2c_release_client(struct i2c_client *client)
+/**
+ * i2c_release_client - release a use of the i2c client structure
+ * @client: the client being no longer referenced
+ *
+ * Must be called when a user of a client is finished with it.
+ */
+void i2c_release_client(struct i2c_client *client)
{
- if (!client->usage_count) {
- pr_debug("i2c-core: %s used one too many times\n",
- __FUNCTION__);
- return -EPERM;
- }
-
- client->usage_count--;
- i2c_dec_use_client(client);
-
- return 0;
+ put_device(&client->dev);
}
EXPORT_SYMBOL(i2c_release_client);
+struct i2c_cmd_arg {
+ unsigned cmd;
+ void *arg;
+};
+
+static int i2c_cmd(struct device *dev, void *_arg)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_cmd_arg *arg = _arg;
+
+ if (client && client->driver && client->driver->command)
+ client->driver->command(client, arg->cmd, arg->arg);
+ return 0;
+}
+
void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
{
- struct list_head *item;
- struct i2c_client *client;
+ struct i2c_cmd_arg cmd_arg;
- mutex_lock(&adap->clist_lock);
- list_for_each(item,&adap->clients) {
- client = list_entry(item, struct i2c_client, list);
- if (!try_module_get(client->driver->driver.owner))
- continue;
- if (NULL != client->driver->command) {
- mutex_unlock(&adap->clist_lock);
- client->driver->command(client,cmd,arg);
- mutex_lock(&adap->clist_lock);
- }
- module_put(client->driver->driver.owner);
- }
- mutex_unlock(&adap->clist_lock);
+ cmd_arg.cmd = cmd;
+ cmd_arg.arg = arg;
+ device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
}
EXPORT_SYMBOL(i2c_clients_command);
@@ -848,11 +885,24 @@
retval = bus_register(&i2c_bus_type);
if (retval)
return retval;
- return class_register(&i2c_adapter_class);
+ retval = class_register(&i2c_adapter_class);
+ if (retval)
+ goto bus_err;
+ retval = i2c_add_driver(&dummy_driver);
+ if (retval)
+ goto class_err;
+ return 0;
+
+class_err:
+ class_unregister(&i2c_adapter_class);
+bus_err:
+ bus_unregister(&i2c_bus_type);
+ return retval;
}
static void __exit i2c_exit(void)
{
+ i2c_del_driver(&dummy_driver);
class_unregister(&i2c_adapter_class);
bus_unregister(&i2c_bus_type);
}
@@ -879,7 +929,15 @@
}
#endif
- mutex_lock_nested(&adap->bus_lock, adap->level);
+ if (in_atomic() || irqs_disabled()) {
+ ret = mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
+ mutex_lock_nested(&adap->bus_lock, adap->level);
+ }
+
ret = adap->algo->master_xfer(adap,msgs,num);
mutex_unlock(&adap->bus_lock);
@@ -978,7 +1036,7 @@
}
int i2c_probe(struct i2c_adapter *adapter,
- struct i2c_client_address_data *address_data,
+ const struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int))
{
int i, err;
@@ -987,7 +1045,7 @@
/* Force entries are done first, and are not affected by ignore
entries */
if (address_data->forces) {
- unsigned short **forces = address_data->forces;
+ const unsigned short * const *forces = address_data->forces;
int kind;
for (kind = 0; forces[kind]; kind++) {
@@ -1085,7 +1143,6 @@
return NULL;
}
- mutex_lock(&adap->clist_lock);
for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
/* Check address validity */
if (addr_list[i] < 0x03 || addr_list[i] > 0x77) {
@@ -1095,7 +1152,7 @@
}
/* Check address availability */
- if (__i2c_check_addr(adap, addr_list[i])) {
+ if (i2c_check_addr(adap, addr_list[i])) {
dev_dbg(&adap->dev, "Address 0x%02x already in "
"use, not probing\n", addr_list[i]);
continue;
@@ -1123,7 +1180,6 @@
break;
}
}
- mutex_unlock(&adap->clist_lock);
if (addr_list[i] == I2C_CLIENT_END) {
dev_dbg(&adap->dev, "Probing failed, no device found\n");
@@ -1139,12 +1195,12 @@
{
struct i2c_adapter *adapter;
- mutex_lock(&core_lists);
+ mutex_lock(&core_lock);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
adapter = NULL;
- mutex_unlock(&core_lists);
+ mutex_unlock(&core_lock);
return adapter;
}
EXPORT_SYMBOL(i2c_get_adapter);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index df540d5..393e679 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -182,27 +182,22 @@
return ret;
}
+static int i2cdev_check(struct device *dev, void *addrp)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+
+ if (!client || client->addr != *(unsigned int *)addrp)
+ return 0;
+
+ return dev->driver ? -EBUSY : 0;
+}
+
/* This address checking function differs from the one in i2c-core
in that it considers an address with a registered device, but no
- bound driver, as NOT busy. */
+ driver bound to it, as NOT busy. */
static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
{
- struct list_head *item;
- struct i2c_client *client;
- int res = 0;
-
- mutex_lock(&adapter->clist_lock);
- list_for_each(item, &adapter->clients) {
- client = list_entry(item, struct i2c_client, list);
- if (client->addr == addr) {
- if (client->driver)
- res = -EBUSY;
- break;
- }
- }
- mutex_unlock(&adapter->clist_lock);
-
- return res;
+ return device_for_each_child(&adapter->dev, &addr, i2cdev_check);
}
static int i2cdev_ioctl(struct inode *inode, struct file *file,
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 5452da1..b66da74 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -47,12 +47,10 @@
#define LOG_TEMP 0 /* continously log temperature */
-#define I2C_DRIVERID_G4FAN 0x9001 /* fixme */
-
static int do_probe( struct i2c_adapter *adapter, int addr, int kind);
/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
0x4c, 0x4d, 0x4e, 0x4f,
0x2c, 0x2d, 0x2e, 0x2f,
I2C_CLIENT_END };
@@ -357,7 +355,6 @@
.driver = {
.name = "therm_windtunnel",
},
- .id = I2C_DRIVERID_G4FAN,
.attach_adapter = do_attach,
.detach_client = do_detach,
};
diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c
index 255dae3..566e479 100644
--- a/drivers/media/video/dpc7146.c
+++ b/drivers/media/video/dpc7146.c
@@ -87,11 +87,24 @@
int cur_input; /* current input */
};
+static int dpc_check_clients(struct device *dev, void *data)
+{
+ struct dpc* dpc = data;
+ struct i2c_client *client = i2c_verify_client(dev);
+
+ if( !client )
+ return 0;
+
+ if( I2C_SAA7111A == client->addr )
+ dpc->saa7111a = client;
+
+ return 0;
+}
+
/* fixme: add vbi stuff here */
static int dpc_probe(struct saa7146_dev* dev)
{
struct dpc* dpc = NULL;
- struct i2c_client *client;
dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL);
if( NULL == dpc ) {
@@ -115,9 +128,7 @@
}
/* loop through all i2c-devices on the bus and look who is there */
- list_for_each_entry(client, &dpc->i2c_adapter.clients, list)
- if( I2C_SAA7111A == client->addr )
- dpc->saa7111a = client;
+ device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients);
/* check if all devices are present */
if( 0 == dpc->saa7111a ) {
diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c
index b6cd21e..4895540 100644
--- a/drivers/media/video/ks0127.c
+++ b/drivers/media/video/ks0127.c
@@ -764,7 +764,6 @@
.addr = 0,
.adapter = NULL,
.driver = &i2c_driver_ks0127,
- .usage_count = 0
};
static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind)
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 98ad309..add6d0d 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -149,10 +149,33 @@
static struct saa7146_extension extension;
+static int mxb_check_clients(struct device *dev, void *data)
+{
+ struct mxb* mxb = data;
+ struct i2c_client *client = i2c_verify_client(dev);
+
+ if( !client )
+ return 0;
+
+ if( I2C_ADDR_TEA6420_1 == client->addr )
+ mxb->tea6420_1 = client;
+ if( I2C_ADDR_TEA6420_2 == client->addr )
+ mxb->tea6420_2 = client;
+ if( I2C_TEA6415C_2 == client->addr )
+ mxb->tea6415c = client;
+ if( I2C_ADDR_TDA9840 == client->addr )
+ mxb->tda9840 = client;
+ if( I2C_SAA7111 == client->addr )
+ mxb->saa7111a = client;
+ if( 0x60 == client->addr )
+ mxb->tuner = client;
+
+ return 0;
+}
+
static int mxb_probe(struct saa7146_dev* dev)
{
struct mxb* mxb = NULL;
- struct i2c_client *client;
int result;
if ((result = request_module("saa7111")) < 0) {
@@ -195,20 +218,7 @@
}
/* loop through all i2c-devices on the bus and look who is there */
- list_for_each_entry(client, &mxb->i2c_adapter.clients, list) {
- if( I2C_ADDR_TEA6420_1 == client->addr )
- mxb->tea6420_1 = client;
- if( I2C_ADDR_TEA6420_2 == client->addr )
- mxb->tea6420_2 = client;
- if( I2C_TEA6415C_2 == client->addr )
- mxb->tea6415c = client;
- if( I2C_ADDR_TDA9840 == client->addr )
- mxb->tda9840 = client;
- if( I2C_SAA7111 == client->addr )
- mxb->saa7111a = client;
- if( 0x60 == client->addr )
- mxb->tuner = client;
- }
+ device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients);
/* check if all devices are present */
if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 9a03dc8..5bb7529 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -2589,11 +2589,7 @@
/* First try D1 and then SAA7191 */
if (vino_drvdata->camera.driver
&& (vino_drvdata->camera.owner == VINO_NO_CHANNEL)) {
- if (i2c_use_client(vino_drvdata->camera.driver)) {
- ret = -ENODEV;
- goto out;
- }
-
+ i2c_use_client(vino_drvdata->camera.driver);
vino_drvdata->camera.owner = vcs->channel;
vcs->input = VINO_INPUT_D1;
vcs->data_norm = VINO_DATA_NORM_D1;
@@ -2602,11 +2598,7 @@
int input, data_norm;
int saa7191_input;
- if (i2c_use_client(vino_drvdata->decoder.driver)) {
- ret = -ENODEV;
- goto out;
- }
-
+ i2c_use_client(vino_drvdata->decoder.driver);
input = VINO_INPUT_COMPOSITE;
saa7191_input = vino_get_saa7191_input(input);
@@ -2688,10 +2680,7 @@
}
if (vino_drvdata->decoder.owner == VINO_NO_CHANNEL) {
- if (i2c_use_client(vino_drvdata->decoder.driver)) {
- ret = -ENODEV;
- goto out;
- }
+ i2c_use_client(vino_drvdata->decoder.driver);
vino_drvdata->decoder.owner = vcs->channel;
}
@@ -2759,10 +2748,7 @@
}
if (vino_drvdata->camera.owner == VINO_NO_CHANNEL) {
- if (i2c_use_client(vino_drvdata->camera.driver)) {
- ret = -ENODEV;
- goto out;
- }
+ i2c_use_client(vino_drvdata->camera.driver);
vino_drvdata->camera.owner = vcs->channel;
}
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 971e18b..c9dfeb1 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -25,6 +25,7 @@
#include <linux/mmc/card.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
+#include <linux/i2c/tps65010.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -35,7 +36,6 @@
#include <asm/arch/dma.h>
#include <asm/arch/mux.h>
#include <asm/arch/fpga.h>
-#include <asm/arch/tps65010.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x04
diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c
index dfef163..e0900ca 100644
--- a/drivers/rtc/rtc-ds1672.c
+++ b/drivers/rtc/rtc-ds1672.c
@@ -16,7 +16,7 @@
#define DRV_VERSION "0.3"
/* Addresses to scan: none. This chip cannot be detected. */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 1c74364..725b0c7 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -61,7 +61,7 @@
/* i2c configuration */
#define ISL1208_I2C_ADDR 0xde
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
};
I2C_CLIENT_INSMOD; /* defines addr_data */
diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c
index a1cd448..7683412 100644
--- a/drivers/rtc/rtc-max6900.c
+++ b/drivers/rtc/rtc-max6900.c
@@ -54,7 +54,7 @@
#define MAX6900_I2C_ADDR 0xa0
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
MAX6900_I2C_ADDR >> 1,
I2C_CLIENT_END
};
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 0242d80..b3317fc 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -25,7 +25,7 @@
* located at 0x51 will pass the validation routine due to
* the way the registers are implemented.
*/
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c
index 556d0e7..c973ba9 100644
--- a/drivers/rtc/rtc-pcf8583.c
+++ b/drivers/rtc/rtc-pcf8583.c
@@ -40,7 +40,7 @@
#define CTRL_ALARM 0x02
#define CTRL_TIMER 0x01
-static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index b3fae35..b90fb18 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -32,7 +32,7 @@
* unknown chips, the user must explicitly set the probe parameter.
*/
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 5cfa3d1..74e1f4b 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -47,7 +47,7 @@
#endif
#ifdef CONFIG_TPS65010
-#include <asm/arch/tps65010.h>
+#include <linux/i2c/tps65010.h>
#else
#define LOW 0
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index ca2a6ab..6c52c66 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -112,9 +112,9 @@
static int isp1301_command(struct i2c_client *client, unsigned int cmd,
void *arg);
-static unsigned short normal_i2c[] =
+static const unsigned short normal_i2c[] =
{ ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
-static unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END };
+static const unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
@@ -123,7 +123,6 @@
};
struct i2c_driver isp1301_driver = {
- .id = I2C_DRIVERID_I2CDEV, /* Fake Id */
.class = I2C_CLASS_HWMON,
.attach_adapter = isp1301_probe,
.detach_client = isp1301_detach,
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index 49cd53e..0cd58f8 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -1232,7 +1232,7 @@
return 0;
}
-static unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
static struct i2c_driver maven_driver;
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index c604d93..31e9783 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -21,9 +21,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/i2c/tps65010.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/omapfb.h>
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index d93eb62..0fd5820 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -29,7 +29,7 @@
* However, the chip cannot be detected without doing an i2c write,
* so use the force module parameter.
*/
-static unsigned short normal_i2c[] = {I2C_CLIENT_END};
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/**
* Insmod parameters
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
index 2a44d3d..2ce28e3 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -76,17 +76,6 @@
#define IXP4XX_UART_XTAL 14745600
/*
- * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
- * used to
- * Used as platform_data to provide GPIO pin information to the ixp42x
- * I2C driver.
- */
-struct ixp4xx_i2c_pins {
- unsigned long sda_pin;
- unsigned long scl_pin;
-};
-
-/*
* This structure provide a means for the board setup code
* to give information to th pata_ixp4xx driver. It is
* passed as platform_data.
diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h
index e404b23..80596b0 100644
--- a/include/asm-arm/arch-pxa/i2c.h
+++ b/include/asm-arm/arch-pxa/i2c.h
@@ -65,7 +65,13 @@
unsigned int slave_addr;
struct i2c_slave_client *slave;
unsigned int class;
+ int use_pio;
};
extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+
+#ifdef CONFIG_PXA27x
+extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
#endif
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index c7a51a1..f922b06 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -33,23 +33,13 @@
#define I2C_DRIVERID_MSP3400 1
#define I2C_DRIVERID_TUNER 2
-#define I2C_DRIVERID_VIDEOTEX 3 /* please rename */
#define I2C_DRIVERID_TDA8425 4 /* stereo sound processor */
#define I2C_DRIVERID_TEA6420 5 /* audio matrix switch */
#define I2C_DRIVERID_TEA6415C 6 /* video matrix switch */
#define I2C_DRIVERID_TDA9840 7 /* stereo sound processor */
#define I2C_DRIVERID_SAA7111A 8 /* video input processor */
-#define I2C_DRIVERID_SAA5281 9 /* videotext decoder */
-#define I2C_DRIVERID_SAA7112 10 /* video decoder, image scaler */
-#define I2C_DRIVERID_SAA7120 11 /* video encoder */
-#define I2C_DRIVERID_SAA7121 12 /* video encoder */
#define I2C_DRIVERID_SAA7185B 13 /* video encoder */
-#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
-#define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */
-#define I2C_DRIVERID_PCF8582C 16 /* eeprom */
-#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
#define I2C_DRIVERID_TEA6300 18 /* audio mixer */
-#define I2C_DRIVERID_BT829 19 /* pc to tv encoder */
#define I2C_DRIVERID_TDA9850 20 /* audio mixer */
#define I2C_DRIVERID_TDA9855 21 /* audio mixer */
#define I2C_DRIVERID_SAA7110 22 /* video decoder */
@@ -60,42 +50,19 @@
#define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */
#define I2C_DRIVERID_TVMIXER 28 /* Mixer driver for tv cards */
#define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */
-#define I2C_DRIVERID_DPL3518 30 /* Dolby decoder chip */
#define I2C_DRIVERID_TDA9873 31 /* TV sound decoder chip */
#define I2C_DRIVERID_TDA9875 32 /* TV sound decoder chip */
#define I2C_DRIVERID_PIC16C54_PV9 33 /* Audio mux/ir receiver */
-
-#define I2C_DRIVERID_SBATT 34 /* Smart Battery Device */
-#define I2C_DRIVERID_SBS 35 /* SB System Manager */
-#define I2C_DRIVERID_VES1893 36 /* VLSI DVB-S decoder */
-#define I2C_DRIVERID_VES1820 37 /* VLSI DVB-C decoder */
-#define I2C_DRIVERID_SAA7113 38 /* video decoder */
-#define I2C_DRIVERID_TDA8444 39 /* octuple 6-bit DAC */
#define I2C_DRIVERID_BT819 40 /* video decoder */
#define I2C_DRIVERID_BT856 41 /* video encoder */
#define I2C_DRIVERID_VPX3220 42 /* video decoder+vbi/vtxt */
-#define I2C_DRIVERID_DRP3510 43 /* ADR decoder (Astra Radio) */
-#define I2C_DRIVERID_SP5055 44 /* Satellite tuner */
-#define I2C_DRIVERID_STV0030 45 /* Multipurpose switch */
-#define I2C_DRIVERID_SAA7108 46 /* video decoder, image scaler */
-#define I2C_DRIVERID_DS1307 47 /* DS1307 real time clock */
#define I2C_DRIVERID_ADV7175 48 /* ADV 7175/7176 video encoder */
#define I2C_DRIVERID_SAA7114 49 /* video decoder */
-#define I2C_DRIVERID_ZR36120 50 /* Zoran 36120 video encoder */
-#define I2C_DRIVERID_24LC32A 51 /* Microchip 24LC32A 32k EEPROM */
-#define I2C_DRIVERID_STM41T00 52 /* real time clock */
-#define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */
#define I2C_DRIVERID_ADV7170 54 /* video encoder */
-#define I2C_DRIVERID_MAX1617 56 /* temp sensor */
#define I2C_DRIVERID_SAA7191 57 /* video decoder */
#define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */
-#define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */
-#define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */
#define I2C_DRIVERID_OVCAMCHIP 61 /* OmniVision CMOS image sens. */
-#define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */
#define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */
-#define I2C_DRIVERID_SAA7114H 64 /* video decoder */
-#define I2C_DRIVERID_DS1374 65 /* DS1374 real time clock */
#define I2C_DRIVERID_TDA9874 66 /* TV sound decoder */
#define I2C_DRIVERID_SAA6752HS 67 /* MPEG2 encoder */
#define I2C_DRIVERID_TVEEPROM 68 /* TV EEPROM */
@@ -114,7 +81,6 @@
#define I2C_DRIVERID_DS1672 81 /* Dallas/Maxim DS1672 RTC */
#define I2C_DRIVERID_X1205 82 /* Xicor/Intersil X1205 RTC */
#define I2C_DRIVERID_PCF8563 83 /* Philips PCF8563 RTC */
-#define I2C_DRIVERID_RS5C372 84 /* Ricoh RS5C372 RTC */
#define I2C_DRIVERID_BT866 85 /* Conexant bt866 video encoder */
#define I2C_DRIVERID_KS0127 86 /* Samsung ks0127 video decoder */
#define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */
@@ -129,8 +95,6 @@
#define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */
#define I2C_DRIVERID_I2CDEV 900
-#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
-#define I2C_DRIVERID_ALERT 903 /* SMBus Alert Responder Client */
/* IDs -- Use DRIVERIDs 1000-1999 for sensors.
These were originally in sensors.h in the lm_sensors package */
@@ -176,24 +140,16 @@
/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
-#define I2C_HW_B_SER 0x010002 /* Serial line interface */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
-#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */
#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */
#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */
#define I2C_HW_B_G400 0x010009 /* Matrox G400 */
#define I2C_HW_B_I810 0x01000a /* Intel I810 */
#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */
-#define I2C_HW_B_PPORT 0x01000c /* Primitive parallel port adapter */
-#define I2C_HW_B_SAVG 0x01000d /* Savage 4 */
#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */
#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */
-#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */
-#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */
-#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */
#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */
-#define I2C_HW_B_IXP4XX 0x010017 /* GPIO on IXP4XX systems */
#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */
#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */
#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */
@@ -207,22 +163,11 @@
#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
/* --- PCF 8584 based algorithms */
-#define I2C_HW_P_LP 0x020000 /* Parallel port interface */
-#define I2C_HW_P_ISA 0x020001 /* generic ISA Bus inteface card */
#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */
/* --- PCA 9564 based algorithms */
#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
-/* --- ACPI Embedded controller algorithms */
-#define I2C_HW_ACPI_EC 0x1f0000
-
-/* --- MPC824x PowerPC adapters */
-#define I2C_HW_MPC824X 0x100001 /* Motorola 8240 / 8245 */
-
-/* --- MPC8xx PowerPC adapters */
-#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */
-
/* --- PowerPC on-chip adapters */
#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
@@ -231,7 +176,6 @@
/* --- SGI adapters */
#define I2C_HW_SGI_VINO 0x160000
-#define I2C_HW_SGI_MACE 0x160001
/* --- XSCALE on-chip adapters */
#define I2C_HW_IOP3XX 0x140000
@@ -255,17 +199,10 @@
#define I2C_HW_SMBUS_W9968CF 0x04000d
#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */
#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */
#define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */
#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */
#define I2C_HW_SMBUS_ALI1563 0x040013
-/* --- ISA pseudo-adapter */
-#define I2C_HW_ISA 0x050000
-
-/* --- IPMB adapter */
-#define I2C_HW_IPMB 0x0c0000
-
/* --- MCP107 adapter */
#define I2C_HW_MPC107 0x0d0000
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index a100c9f..76014f8 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -140,7 +140,6 @@
int (*command)(struct i2c_client *client,unsigned int cmd, void *arg);
struct device_driver driver;
- struct list_head list;
};
#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
@@ -155,12 +154,11 @@
* generic enough to hide second-sourcing and compatible revisions.
* @adapter: manages the bus segment hosting this I2C device
* @driver: device's driver, hence pointer to access routines
- * @usage_count: counts current number of users of this client
* @dev: Driver model device node for the slave.
* @irq: indicates the IRQ generated by this device (if any)
* @driver_name: Identifies new-style driver used with this device; also
* used as the module name for hotplug/coldplug modprobe support.
- * @list: list of active/busy clients
+ * @list: list of active/busy clients (DEPRECATED)
* @released: used to synchronize client releases & detaches and references
*
* An i2c_client identifies a single device (i.e. chip) connected to an
@@ -175,16 +173,16 @@
char name[I2C_NAME_SIZE];
struct i2c_adapter *adapter; /* the adapter we sit on */
struct i2c_driver *driver; /* and our access routines */
- int usage_count; /* How many accesses currently */
- /* to the client */
struct device dev; /* the device structure */
int irq; /* irq issued by device (or -1) */
char driver_name[KOBJ_NAME_LEN];
- struct list_head list;
+ struct list_head list; /* DEPRECATED */
struct completion released;
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
+extern struct i2c_client *i2c_verify_client(struct device *dev);
+
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
struct device * const dev = container_of(kobj, struct device, kobj);
@@ -261,6 +259,12 @@
struct i2c_board_info *info,
unsigned short const *addr_list);
+/* For devices that use several addresses, use i2c_new_dummy() to make
+ * client handles for the extra addresses.
+ */
+extern struct i2c_client *
+i2c_new_dummy(struct i2c_adapter *adap, u16 address, const char *type);
+
extern void i2c_unregister_device(struct i2c_client *);
/* Mainboard arch_initcall() code should register all its I2C devices.
@@ -319,8 +323,7 @@
struct device dev; /* the adapter device */
int nr;
- struct list_head clients;
- struct list_head list;
+ struct list_head clients; /* DEPRECATED */
char name[48];
struct completion dev_released;
};
@@ -357,10 +360,10 @@
* command line
*/
struct i2c_client_address_data {
- unsigned short *normal_i2c;
- unsigned short *probe;
- unsigned short *ignore;
- unsigned short **forces;
+ const unsigned short *normal_i2c;
+ const unsigned short *probe;
+ const unsigned short *ignore;
+ const unsigned short * const *forces;
};
/* Internal numbers to terminate lists */
@@ -389,11 +392,8 @@
extern int i2c_attach_client(struct i2c_client *);
extern int i2c_detach_client(struct i2c_client *);
-/* Should be used to make sure that client-struct is valid and that it
- is okay to access the i2c-client.
- returns -ENODEV if client has gone in the meantime */
-extern int i2c_use_client(struct i2c_client *);
-extern int i2c_release_client(struct i2c_client *);
+extern struct i2c_client *i2c_use_client(struct i2c_client *client);
+extern void i2c_release_client(struct i2c_client *client);
/* call the i2c_client->command() of all attached clients with
* the given arguments */
@@ -405,7 +405,7 @@
* specific address (unless a 'force' matched);
*/
extern int i2c_probe(struct i2c_adapter *adapter,
- struct i2c_client_address_data *address_data,
+ const struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int));
extern struct i2c_adapter* i2c_get_adapter(int id);
@@ -598,104 +598,93 @@
"additionally"); \
I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \
"scan"); \
-static struct i2c_client_address_data addr_data = { \
+const static struct i2c_client_address_data addr_data = { \
.normal_i2c = normal_i2c, \
.probe = probe, \
.ignore = ignore, \
.forces = forces, \
}
+#define I2C_CLIENT_FORCE_TEXT \
+ "List of adapter,address pairs to boldly assume to be present"
+
/* These are the ones you want to use in your own drivers. Pick the one
which matches the number of devices the driver differenciates between. */
-#define I2C_CLIENT_INSMOD \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- static unsigned short *forces[] = { \
- force, \
- NULL \
- }; \
+#define I2C_CLIENT_INSMOD \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
+static const unsigned short * const forces[] = { force, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_1(chip1) \
enum chips { any_chip, chip1 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-static unsigned short *forces[] = { force, force_##chip1, NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_2(chip1, chip2) \
enum chips { any_chip, chip1, chip2 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \
enum chips { any_chip, chip1, chip2, chip3 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, force_##chip3, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \
enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, NULL}; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, force_##chip3, \
+ force_##chip4, NULL}; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- force_##chip6, NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, force_##chip6, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
chip7 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
@@ -703,18 +692,16 @@
I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- force_##chip6, force_##chip7, \
- NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, force_##chip6, \
+ force_##chip7, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
chip7, chip8 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \
I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
@@ -723,11 +710,10 @@
I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
I2C_CLIENT_MODULE_PARM_FORCE(chip8); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- force_##chip6, force_##chip7, \
- force_##chip8, NULL }; \
+static const unsigned short * const forces[] = { force, \
+ force_##chip1, force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, force_##chip6, \
+ force_##chip7, force_##chip8, NULL }; \
I2C_CLIENT_INSMOD_COMMON
#endif /* __KERNEL__ */
#endif /* _LINUX_I2C_H */
diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/linux/i2c/tps65010.h
similarity index 96%
rename from include/asm-arm/arch-omap/tps65010.h
rename to include/linux/i2c/tps65010.h
index b9aa2b3..7021635 100644
--- a/include/asm-arm/arch-omap/tps65010.h
+++ b/include/linux/i2c/tps65010.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/tps65010.h
+/* linux/i2c/tps65010.h
*
* Functions to access TPS65010 power management device.
*
@@ -25,8 +25,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_TPS65010_H
-#define __ASM_ARCH_TPS65010_H
+#ifndef __LINUX_I2C_TPS65010_H
+#define __LINUX_I2C_TPS65010_H
/*
* ----------------------------------------------------------------------------
@@ -152,5 +152,5 @@
*/
extern int tps65013_set_low_pwr(unsigned mode);
-#endif /* __ASM_ARCH_TPS65010_H */
+#endif /* __LINUX_I2C_TPS65010_H */
diff --git a/include/linux/m41t00.h b/include/linux/m41t00.h
deleted file mode 100644
index b423360..0000000
--- a/include/linux/m41t00.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Definitions for the ST M41T00 family of i2c rtc chips.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2005, 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _M41T00_H
-#define _M41T00_H
-
-#define M41T00_DRV_NAME "m41t00"
-#define M41T00_I2C_ADDR 0x68
-
-#define M41T00_TYPE_M41T00 0
-#define M41T00_TYPE_M41T81 81
-#define M41T00_TYPE_M41T85 85
-
-struct m41t00_platform_data {
- u8 type;
- u8 i2c_addr;
- u8 sqw_freq;
-};
-
-/* SQW output disabled, this is default value by power on */
-#define M41T00_SQW_DISABLE (0)
-
-#define M41T00_SQW_32KHZ (1<<4) /* 32.768 KHz */
-#define M41T00_SQW_8KHZ (2<<4) /* 8.192 KHz */
-#define M41T00_SQW_4KHZ (3<<4) /* 4.096 KHz */
-#define M41T00_SQW_2KHZ (4<<4) /* 2.048 KHz */
-#define M41T00_SQW_1KHZ (5<<4) /* 1.024 KHz */
-#define M41T00_SQW_512HZ (6<<4) /* 512 Hz */
-#define M41T00_SQW_256HZ (7<<4) /* 256 Hz */
-#define M41T00_SQW_128HZ (8<<4) /* 128 Hz */
-#define M41T00_SQW_64HZ (9<<4) /* 64 Hz */
-#define M41T00_SQW_32HZ (10<<4) /* 32 Hz */
-#define M41T00_SQW_16HZ (11<<4) /* 16 Hz */
-#define M41T00_SQW_8HZ (12<<4) /* 8 Hz */
-#define M41T00_SQW_4HZ (13<<4) /* 4 Hz */
-#define M41T00_SQW_2HZ (14<<4) /* 2 Hz */
-#define M41T00_SQW_1HZ (15<<4) /* 1 Hz */
-
-extern ulong m41t00_get_rtc_time(void);
-extern int m41t00_set_rtc_time(ulong nowtime);
-
-#endif /* _M41T00_H */
diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h
index 2418542..e764557 100644
--- a/include/media/v4l2-i2c-drv-legacy.h
+++ b/include/media/v4l2-i2c-drv-legacy.h
@@ -34,7 +34,7 @@
};
static struct v4l2_i2c_driver_data v4l2_i2c_data;
-static struct i2c_client_address_data addr_data;
+static const struct i2c_client_address_data addr_data;
static struct i2c_driver v4l2_i2c_driver_legacy;
static char v4l2_i2c_drv_name_legacy[32];
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 272ae38..bb7d744 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -34,8 +34,6 @@
static struct pmac_keywest *keywest_ctx;
-#define I2C_DRIVERID_KEYWEST 0xFEBA
-
static int keywest_attach_adapter(struct i2c_adapter *adapter);
static int keywest_detach_client(struct i2c_client *client);
@@ -43,7 +41,6 @@
.driver = {
.name = "PMac Keywest Audio",
},
- .id = I2C_DRIVERID_KEYWEST,
.attach_adapter = &keywest_attach_adapter,
.detach_client = &keywest_detach_client,
};
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index abac628..dab22cc 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -234,7 +234,7 @@
* lower three bits are determined via the AD2, AD1, and AD0 pins
* (respectively).
*/
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, I2C_CLIENT_END
};
I2C_CLIENT_INSMOD;
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index d5a8fc2..f1f6b94 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -573,7 +573,7 @@
static struct i2c_client client_template;
-static unsigned short normal_i2c[] = { 0x7C, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x7C, I2C_CLIENT_END };
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
