diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index 6845574..ee4bb73 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -199,6 +199,8 @@
 		       "mydev: 24-bit DMA addressing not available.\n");
 		goto ignore_this_device;
 	}
+[Better use DMA_24BIT_MASK instead of 0x00ffffff.
+See linux/include/dma-mapping.h for reference.]
 
 When pci_set_dma_mask() is successful, and returns zero, the PCI layer
 saves away this mask you have provided.  The PCI layer will use this
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 69f4c7c..cac09e3 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1972,7 +1972,7 @@
 		    "(itf %d): No suitable DMA available.\n", lanai->number);
 		return -EBUSY;
 	}
-	if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) {
+	if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
 		printk(KERN_WARNING DEV_LABEL
 		    "(itf %d): No suitable DMA available.\n", lanai->number);
 		return -EBUSY;
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index c16e66b..f7d4c65 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -50,6 +50,7 @@
 #include <linux/timer.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/fcntl.h>        /* O_ACCMODE */
 #include <linux/hdreg.h>  /* HDIO_GETGEO */
@@ -881,8 +882,8 @@
 	printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n",
 	       card->card_number, dev->bus->number, dev->devfn);
 
-	if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
-	    pci_set_dma_mask(dev, 0xffffffffLL)) {
+	if (pci_set_dma_mask(dev, DMA_64BIT_MASK) &&
+	    pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
 		return  -ENOMEM;
 	}
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index e7fc28b..7627a75 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -134,6 +134,7 @@
 #include <linux/random.h>
 #include <linux/init.h>
 #include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -2932,7 +2933,7 @@
 	if (id->driver_data & DEV_HAS_HIGH_DMA) {
 		/* packet format 3: supports 40-bit addressing */
 		np->desc_ver = DESC_VER_3;
-		if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+		if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
 			printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
 					pci_name(pci_dev));
 		} else {
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 9b8295e..ae71ed5 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -44,6 +44,7 @@
 #include <linux/ip.h>
 #include <linux/tcp.h>
 #include <linux/udp.h>
+#include <linux/dma-mapping.h>
 
 #ifdef CONFIG_SERIAL_8250
 #include <linux/serial_core.h>
@@ -1195,17 +1196,17 @@
 	int err, pci_using_dac;
 
 	/* Configure DMA attributes. */
-	err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 	if (!err) {
 		pci_using_dac = 1;
-		err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 		if (err < 0) {
 			printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
 			       "for consistent allocations\n", pci_name(pdev));
 			goto out;
 		}
 	} else {
-		err = pci_set_dma_mask(pdev, 0xffffffffULL);
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (err) {
 			printk(KERN_ERR "%s: No usable DMA configuration, "
 			       "aborting.\n", pci_name(pdev));
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 0fede50a..8e9b1a5 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1828,10 +1828,10 @@
 	int using_dac = 0;
 
 	/* See if we can set the dma mask early on; failure is fatal. */
-	if (sizeof(dma_addr_t) == 8 && 
-	 	!pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+	if (sizeof(dma_addr_t) == 8 &&
+	 	!pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) {
 		using_dac = 1;
-	} else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+	} else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
 		using_dac = 0;
 	} else {
 		printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 9d3b51c..29a756d 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -577,8 +577,8 @@
 	   We set both dma_mask and consistent_dma_mask to 28 bits
 	   and pray pci_alloc_consistent() will use this info. It should
 	   work on most platforms */
-	if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
-	    pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
+	    pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
 		printk(KERN_ERR "wanXL: No usable DMA configuration\n");
 		return -EIO;
 	}
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index b41d666..bfa0cc3 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/init.h> /* For __init, __exit */
+#include <linux/dma-mapping.h>
 
 #include "prismcompat.h"
 #include "islpci_dev.h"
@@ -124,7 +125,7 @@
 	}
 
 	/* enable PCI DMA */
-	if (pci_set_dma_mask(pdev, 0xffffffff)) {
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
 		goto do_pci_disable_device;
         }
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 5bf83cb..bde3d58 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -42,6 +42,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
 #include <scsi/scsicam.h>
 
 #include <asm/dma.h>
@@ -677,7 +678,7 @@
 		if (pci_enable_device(PCI_Device))
 			continue;
 
-		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+		if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK ))
 			continue;
 
 		Bus = PCI_Device->bus->number;
@@ -832,7 +833,7 @@
 		if (pci_enable_device(PCI_Device))
 			continue;
 
-		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+		if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
 			continue;
 
 		Bus = PCI_Device->bus->number;
@@ -886,7 +887,7 @@
 		if (pci_enable_device(PCI_Device))
 			continue;
 
-		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+		if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
 			continue;
 
 		Bus = PCI_Device->bus->number;
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 9f45ae1..3dce21c 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -89,6 +89,7 @@
 #include <linux/string.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1052,7 +1053,7 @@
 
 	if (pci_enable_device(pdev))
 		goto out;
-	if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "Unable to set 32bit DMA "
 				    "on inia100 adapter, ignoring.\n");
 		goto out_disable_device;
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index a16f8de..8df4a0e 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
 #include <asm/semaphore.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c259633..7203307 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -45,6 +45,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
 #include <linux/syscalls.h>
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
@@ -806,8 +807,8 @@
 	 * to driver communication memory to be allocated below 2gig
 	 */
 	if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) 
-		if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
-				pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+		if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) ||
+				pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK))
 			goto out;
 	
 	pci_set_master(pdev);
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 5227a77..a198d86 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -28,6 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
 #include <asm/system.h>
 #include <asm/io.h>
 
@@ -2631,7 +2632,7 @@
 	if (pci_enable_device(pdev))
 		return -EIO;
 
-        if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
+        if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
                 printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
         } else {
                 printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 6e6b293..b1b704a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -57,6 +57,7 @@
 #include <linux/reboot.h>
 #include <linux/spinlock.h>
 #include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/timer.h>
 #include <linux/string.h>
@@ -906,8 +907,8 @@
 	}
 
 	pci_set_master(pDev);
-	if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
-	    pci_set_dma_mask(pDev, 0xffffffffULL))
+	if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
+	    pci_set_dma_mask(pDev, DMA_32BIT_MASK))
 		return -EINVAL;
 
 	base_addr0_phys = pci_resource_start(pDev,0);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index b3f9de8..059eeee 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -490,6 +490,7 @@
 #include <linux/init.h>
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/io.h>
@@ -1426,7 +1427,7 @@
 
 	if (ha->pdev) {
 		pci_set_master(ha->pdev);
-		if (pci_set_dma_mask(ha->pdev, 0xffffffff))
+		if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK))
 			printk("%s: warning, pci_set_dma_mask failed.\n",
 			       ha->board_name);
 	}
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 7f7013e..d5740bb 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -388,6 +388,7 @@
 #include <linux/proc_fs.h>
 #include <linux/time.h>
 #include <linux/timer.h>
+#include <linux/dma-mapping.h>
 #ifdef GDTH_RTC
 #include <linux/mc146818rtc.h>
 #endif
@@ -4527,15 +4528,15 @@
             if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
                 /* 64-bit DMA only supported from FW >= x.43 */
                 (!ha->dma64_support)) {
-                if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+                if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
                     printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
                     err = TRUE;
                 }
             } else {
                 shp->max_cmd_len = 16;
-                if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) {
+                if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
                     printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
-                } else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+                } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
                     printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
                     err = TRUE;
                 }
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index ea6f3c0..0cc7f65 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -127,6 +127,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
@@ -2780,7 +2781,7 @@
 			if (((dRegValue & 0xFF00) >> 8) == 0xFF)
 				dRegValue = 0;
 			wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
-			if (pci_set_dma_mask(pDev, 0xffffffff)) {
+			if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
 				printk(KERN_WARNING 
 				       "i91u: Could not set 32 bit DMA mask\n");
 				continue;
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 481708d..a4c0b04 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -179,6 +179,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/types.h>
+#include <linux/dma-mapping.h>
 
 #include <scsi/sg.h>
 
@@ -7284,10 +7285,10 @@
 	 * are guaranteed to be < 4G.
 	 */
 	if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) &&
-	    !pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) {
+	    !pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) {
 		(ha)->flags |= IPS_HA_ENH_SG;
 	} else {
-		if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) {
+		if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) {
 			printk(KERN_WARNING "Unable to set DMA Mask\n");
 			return ips_abort_init(ha, index);
 		}
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 7144674..80b68a2 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -45,6 +45,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 #include <scsi/scsicam.h>
 
 #include "scsi.h"
@@ -2094,7 +2095,7 @@
 
 	memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
 
-	if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) {
+	if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) {
 		kfree(*pdev);
 		return -1;
 	}
@@ -4859,10 +4860,10 @@
 
 	/* Set the Mode of addressing to 64 bit if we can */
 	if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
-		pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+		pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 		adapter->has_64bit_addr = 1;
 	} else  {
-		pci_set_dma_mask(pdev, 0xffffffff);
+		pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		adapter->has_64bit_addr = 0;
 	}
 		
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index a279ebb..30ee0ef 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -38,6 +38,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
@@ -2776,7 +2777,7 @@
 	/*
 	 * setup DMA 
 	 */
-	if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) {
+	if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
 		nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
 		goto scsi_unregister;
 	}
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index e023024..5a48e55 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -350,6 +350,7 @@
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -4321,7 +4322,7 @@
 
 #ifdef QLA_64BIT_PTR
 	if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
-		if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+		if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
 			printk(KERN_WARNING "scsi(%li): Unable to set a "
 			       "suitable DMA mask - aborting\n", ha->host_no);
 			error = -ENODEV;
@@ -4331,7 +4332,7 @@
 		dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
 			ha->host_no);
 #else
-	if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+	if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "scsi(%li): Unable to set a "
 		       "suitable DMA mask - aborting\n", ha->host_no);
 		error = -ENODEV;
diff --git a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c
index 5b15998..52b224a 100644
--- a/drivers/scsi/qlogicfc.c
+++ b/drivers/scsi/qlogicfc.c
@@ -61,6 +61,7 @@
 #include <linux/unistd.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
 #include <linux/jiffies.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -738,8 +739,8 @@
 				continue;
 
 			/* Try to configure DMA attributes. */
-			if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) &&
-			    pci_set_dma_mask(pdev, 0xffffffffULL))
+			if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+			    pci_set_dma_mask(pdev, DMA_32BIT_MASK))
 					continue;
 
 		        host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata));
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index a873106..9b4751a 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -21,6 +21,7 @@
 #define DMA_30BIT_MASK	0x000000003fffffffULL
 #define DMA_29BIT_MASK	0x000000001fffffffULL
 #define DMA_28BIT_MASK	0x000000000fffffffULL
+#define DMA_24BIT_MASK 0x0000000000ffffffULL
 
 #include <asm/dma-mapping.h>
 
diff --git a/sound/oss/esssolo1.c b/sound/oss/esssolo1.c
index 78d3e29..6861563 100644
--- a/sound/oss/esssolo1.c
+++ b/sound/oss/esssolo1.c
@@ -2348,7 +2348,7 @@
 	/* Recording requires 24-bit DMA, so attempt to set dma mask
 	 * to 24 bits first, then 32 bits (playback only) if that fails.
 	 */
-	if (pci_set_dma_mask(pcidev, 0x00ffffff) &&
+	if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK) &&
 	    pci_set_dma_mask(pcidev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "solo1: architecture does not support 24bit or 32bit PCI busmaster DMA\n");
 		return -ENODEV;
diff --git a/sound/oss/sonicvibes.c b/sound/oss/sonicvibes.c
index 4471757..42bd276 100644
--- a/sound/oss/sonicvibes.c
+++ b/sound/oss/sonicvibes.c
@@ -116,6 +116,7 @@
 #include <linux/spinlock.h>
 #include <linux/smp_lock.h>
 #include <linux/gameport.h>
+#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
 
@@ -2535,7 +2536,7 @@
 		return -ENODEV;
 	if (pcidev->irq == 0)
 		return -ENODEV;
-	if (pci_set_dma_mask(pcidev, 0x00ffffff)) {
+	if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK)) {
 		printk(KERN_WARNING "sonicvibes: architecture does not support 24bit PCI busmaster DMA\n");
 		return -ENODEV;
 	}
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index 2aa5a7f..c6c8333 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -39,6 +39,7 @@
 #include <linux/interrupt.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 
 #include <sound/driver.h>
 #include <sound/core.h>
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index e264136..fc92b68 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -33,6 +33,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/info.h>
@@ -2220,8 +2221,8 @@
 	if ((err = pci_enable_device(pci)) < 0)
 		return err;
 	/* check, if we can restrict PCI DMA transfers to 31 bits */
-	if (pci_set_dma_mask(pci, 0x7fffffff) < 0 ||
-	    pci_set_consistent_dma_mask(pci, 0x7fffffff) < 0) {
+	if (pci_set_dma_mask(pci, DMA_31BIT_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, DMA_31BIT_MASK) < 0) {
 		snd_printk(KERN_ERR "architecture does not support 31bit PCI busmaster DMA\n");
 		pci_disable_device(pci);
 		return -ENXIO;
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 7b2ff5f..100d812 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -70,6 +70,7 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/rawmidi.h>
@@ -688,8 +689,8 @@
 		return err;
 	}
 	/* check, if we can restrict PCI DMA transfers to 24 bits */
-	if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
-	    pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+	if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
 		snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
 		pci_disable_device(pci);
 		return -ENXIO;
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index e077eb3..680077e 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -104,6 +104,7 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
@@ -1669,8 +1670,8 @@
 	chip->irq = -1;
 
 	/* check if we can restrict PCI DMA transfers to 24 bits */
-	if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
-	    pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+	if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
 		snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
 		err = -ENXIO;
 		goto out_err;
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 2208dbd..3e332f3 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -36,6 +36,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 0d556b0..4d62fe4 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -55,6 +55,7 @@
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
@@ -1517,8 +1518,8 @@
 	if ((err = pci_enable_device(pci)) < 0)
 		return err;
         /* check, if we can restrict PCI DMA transfers to 24 bits */
-	if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
-	    pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+	if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
 		snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
 		pci_disable_device(pci);
                 return -ENXIO;
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index dd465a1..e3ad17f 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -104,6 +104,7 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 672e198..b88eeba 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -56,7 +56,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
+
 #include <sound/core.h>
 #include <sound/cs8427.h>
 #include <sound/info.h>
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 8bc0849..44393e1 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -41,6 +41,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/info.h>
 #include <sound/control.h>
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 43ee3b2..b5a0950 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -28,6 +28,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
+#include <linux/dma-mapping.h>
+
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/info.h>
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index f679779..35875c8 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
+#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 7bbea37..2d66a09 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -1227,8 +1228,8 @@
 	if ((err = pci_enable_device(pci)) < 0)
 		return err;
 	/* check, if we can restrict PCI DMA transfers to 24 bits */
-        if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
-	    pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+        if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
 		snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
 		pci_disable_device(pci);
                 return -ENXIO;
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 83b7d8a..52178b8 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -35,6 +35,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/gameport.h>
+#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/info.h>
@@ -3554,8 +3555,8 @@
 	if ((err = pci_enable_device(pci)) < 0)
 		return err;
 	/* check, if we can restrict PCI DMA transfers to 30 bits */
-	if (pci_set_dma_mask(pci, 0x3fffffff) < 0 ||
-	    pci_set_consistent_dma_mask(pci, 0x3fffffff) < 0) {
+	if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) {
 		snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n");
 		pci_disable_device(pci);
 		return -ENXIO;