ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks
Support the Creative BT-D1 Bluetooth USB audio device. Before this
patch, Linux had trouble finding the correct USB descriptors and bailed
out with these messages:
no or invalid class specific endpoint descriptor
Now it still prints these messages on hotplug:
snd-usb-audio: probe of ...:1.0 failed with error -5
snd-usb-audio: probe of ...:1.2 failed with error -5
snd-usb-audio: probe of ...:1.3 failed with error -5
But the device works correctly, including the HID support.
The patch is diff'ed against 3.8-rc1 but should apply to older kernels
as well.
Signed-off-by: Alexander Schremmer <alex@alexanderweb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index cdcf6b4..5388ca3 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -50,6 +50,28 @@
}
},
+{
+ /* Creative BT-D1 */
+ USB_DEVICE(0x041e, 0x0005),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels = 2,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x03,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC,
+ .attributes = 0,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ }
+ }
+},
+
/* Creative/Toshiba Multimedia Center SB-0500 */
{
USB_DEVICE(0x041e, 0x3048),
