ni5010: Move the Racal-Interlan (Micom) driver
Moves the Racal-Interlan driver into drivers/net/ethernet/racal/ and
make the necessary Kconfig and Makefile changes.
CC: "Jan-Pascal van Best" <janpascal@vanbest.org>
CC: Andreas Mohr <andi@lisas.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b368cc..19bd60d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4520,7 +4520,7 @@
M: Andreas Mohr <andi@lisas.de>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/ni5010.*
+F: drivers/net/ethernet/racal/ni5010.*
NILFS2 FILESYSTEM
M: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d7d0b35..b76de82 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -581,31 +581,6 @@
help
Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
-config NET_VENDOR_RACAL
- bool "Racal-Interlan (Micom) NI cards"
- depends on ISA
- help
- If you have a network (Ethernet) card belonging to this class, such
- as the NI5010, say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about NI cards. If you say Y, you will be asked for
- your specific card in the following questions.
-
-config NI5010
- tristate "NI5010 support (EXPERIMENTAL)"
- depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that this is still
- experimental code.
-
- To compile this driver as a module, choose M here. The module
- will be called ni5010.
-
config DNET
tristate "Dave ethernet support (DNET)"
depends on NET_ETHERNET && HAS_IOMEM
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 49b3e87..e641f70 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -140,7 +140,6 @@
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_SC92031) += sc92031.o
obj-$(CONFIG_ETH16I) += eth16i.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index d0a8fa8..7efbb7c 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -19,6 +19,7 @@
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 6d3276a..86da8b8 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,4 +10,5 @@
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
diff --git a/drivers/net/ethernet/racal/Kconfig b/drivers/net/ethernet/racal/Kconfig
new file mode 100644
index 0000000..45d4930
--- /dev/null
+++ b/drivers/net/ethernet/racal/Kconfig
@@ -0,0 +1,32 @@
+#
+# Racal-Interlan device configuration
+#
+
+config NET_VENDOR_RACAL
+ bool "Racal-Interlan (Micom) NI devices"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, such
+ as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about NI cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_RACAL
+
+config NI5010
+ tristate "NI5010 support (EXPERIMENTAL)"
+ depends on ISA && EXPERIMENTAL && BROKEN_ON_SMP
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that this is still
+ experimental code.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ni5010.
+
+endif # NET_VENDOR_RACAL
diff --git a/drivers/net/ethernet/racal/Makefile b/drivers/net/ethernet/racal/Makefile
new file mode 100644
index 0000000..1e210ca
--- /dev/null
+++ b/drivers/net/ethernet/racal/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Racal-Interlan network device drivers.
+#
+
+obj-$(CONFIG_NI5010) += ni5010.o
diff --git a/drivers/net/ni5010.c b/drivers/net/ethernet/racal/ni5010.c
similarity index 100%
rename from drivers/net/ni5010.c
rename to drivers/net/ethernet/racal/ni5010.c
diff --git a/drivers/net/ni5010.h b/drivers/net/ethernet/racal/ni5010.h
similarity index 100%
rename from drivers/net/ni5010.h
rename to drivers/net/ethernet/racal/ni5010.h
