strip: Fix up strip for the new order
- Use the tty baud functions
- Call driver termios methods directly holding the right locking
- Check for a write method
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index bced3fe..5dd23c9 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -768,41 +768,17 @@
/* General routines for STRIP */
/*
- * get_baud returns the current baud rate, as one of the constants defined in
- * termbits.h
- * If the user has issued a baud rate override using the 'setserial' command
- * and the logical current rate is set to 38.4, then the true baud rate
- * currently in effect (57.6 or 115.2) is returned.
- */
-static unsigned int get_baud(struct tty_struct *tty)
-{
- if (!tty || !tty->termios)
- return (0);
- if ((tty->termios->c_cflag & CBAUD) == B38400 && tty->driver_data) {
- struct async_struct *info =
- (struct async_struct *) tty->driver_data;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- return (B57600);
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- return (B115200);
- }
- return (tty->termios->c_cflag & CBAUD);
-}
-
-/*
* set_baud sets the baud rate to the rate defined by baudcode
- * Note: The rate B38400 should be avoided, because the user may have
- * issued a 'setserial' speed override to map that to a different speed.
- * We could achieve a true rate of 38400 if we needed to by cancelling
- * any user speed override that is in place, but that might annoy the
- * user, so it is simplest to just avoid using 38400.
*/
-static void set_baud(struct tty_struct *tty, unsigned int baudcode)
+static void set_baud(struct tty_struct *tty, speed_t baudrate)
{
- struct ktermios old_termios = *(tty->termios);
- tty->termios->c_cflag &= ~CBAUD; /* Clear the old baud setting */
- tty->termios->c_cflag |= baudcode; /* Set the new baud setting */
- tty->driver->set_termios(tty, &old_termios);
+ struct ktermios old_termios;
+
+ mutex_lock(&tty->termios_mutex);
+ old_termios =*(tty->termios);
+ tty_encode_baud_rate(tty, baudrate, baudrate);
+ tty->ops->set_termios(tty, &old_termios);
+ mutex_unlock(&tty->termios_mutex);
}
/*
@@ -1217,7 +1193,7 @@
strip_info->watchdog_doreset = jiffies + 1 * HZ;
/* If the user has selected a baud rate above 38.4 see what magic we have to do */
- if (strip_info->user_baud > B38400) {
+ if (strip_info->user_baud > 38400) {
/*
* Subtle stuff: Pay attention :-)
* If the serial port is currently at the user's selected (>38.4) rate,
@@ -1227,17 +1203,17 @@
* issued the ATS304 command last time through, so this time we restore
* the user's selected rate and issue the normal starmode reset string.
*/
- if (strip_info->user_baud == get_baud(tty)) {
+ if (strip_info->user_baud == tty_get_baud_rate(tty)) {
static const char b0[] = "ate0q1s304=57600\r";
static const char b1[] = "ate0q1s304=115200\r";
static const StringDescriptor baudstring[2] =
{ {b0, sizeof(b0) - 1}
, {b1, sizeof(b1) - 1}
};
- set_baud(tty, B19200);
- if (strip_info->user_baud == B57600)
+ set_baud(tty, 19200);
+ if (strip_info->user_baud == 57600)
s = baudstring[0];
- else if (strip_info->user_baud == B115200)
+ else if (strip_info->user_baud == 115200)
s = baudstring[1];
else
s = baudstring[1]; /* For now */
@@ -1245,7 +1221,7 @@
set_baud(tty, strip_info->user_baud);
}
- tty->driver->write(tty, s.string, s.length);
+ tty->ops->write(tty, s.string, s.length);
#ifdef EXT_COUNTERS
strip_info->tx_ebytes += s.length;
#endif
@@ -1267,7 +1243,7 @@
if (strip_info->tx_left > 0) {
int num_written =
- tty->driver->write(tty, strip_info->tx_head,
+ tty->ops->write(tty, strip_info->tx_head,
strip_info->tx_left);
strip_info->tx_left -= num_written;
strip_info->tx_head += num_written;
@@ -2457,7 +2433,7 @@
strip_info->working = FALSE;
strip_info->firmware_level = NoStructure;
strip_info->next_command = CompatibilityCommand;
- strip_info->user_baud = get_baud(strip_info->tty);
+ strip_info->user_baud = tty_get_baud_rate(strip_info->tty);
printk(KERN_INFO "%s: Initializing Radio.\n",
strip_info->dev->name);
@@ -2632,6 +2608,13 @@
return -EEXIST;
/*
+ * We need a write method.
+ */
+
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
+
+ /*
* OK. Find a free STRIP channel to use.
*/
if ((strip_info = strip_alloc()) == NULL)
@@ -2652,8 +2635,7 @@
tty->disc_data = strip_info;
tty->receive_room = 65536;
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
/*
* Restore default settings
